summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS8
-rw-r--r--arch/arm/mach-omap2/Kconfig18
-rw-r--r--arch/arm/mach-omap2/Makefile8
-rw-r--r--arch/arm/mach-omap2/board-3430sdp.c632
-rw-r--r--arch/arm/mach-omap2/board-am3517crane.c1
-rw-r--r--arch/arm/mach-omap2/board-cm-t35.c3
-rw-r--r--arch/arm/mach-omap2/board-cm-t3517.c3
-rw-r--r--arch/arm/mach-omap2/board-flash.c3
-rw-r--r--arch/arm/mach-omap2/board-flash.h1
-rw-r--r--arch/arm/mach-omap2/board-n8x0.c2
-rw-r--r--arch/arm/mach-omap2/board-omap3pandora.c2
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c32
-rw-r--r--arch/arm/mach-omap2/board-ti8168evm.c62
-rw-r--r--arch/arm/mach-omap2/devices.c26
-rw-r--r--arch/arm/mach-omap2/gpmc-nand.c3
-rw-r--r--arch/arm/mach-omap2/gpmc-nand.h27
-rw-r--r--arch/arm/mach-omap2/gpmc-onenand.c3
-rw-r--r--arch/arm/mach-omap2/gpmc-onenand.h24
-rw-r--r--arch/arm/mach-omap2/gpmc-smc91x.c186
-rw-r--r--arch/arm/mach-omap2/gpmc-smc91x.h42
-rw-r--r--arch/arm/mach-omap2/gpmc.h227
-rw-r--r--arch/arm/mach-omap2/pm34xx.c2
-rw-r--r--drivers/memory/Kconfig8
-rw-r--r--drivers/memory/Makefile1
-rw-r--r--drivers/memory/omap-gpmc.c (renamed from arch/arm/mach-omap2/gpmc.c)385
-rw-r--r--include/linux/omap-gpmc.h199
26 files changed, 553 insertions, 1355 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index e3a96e42193c..0d6469a2cf70 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6702,6 +6702,14 @@ L: linux-omap@vger.kernel.org
S: Maintained
F: sound/soc/omap/
+OMAP GENERAL PURPOSE MEMORY CONTROLLER SUPPORT
+M: Roger Quadros <rogerq@ti.com>
+M: Tony Lindgren <tony@atomide.com>
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: drivers/memory/omap-gpmc.c
+F: arch/arm/mach-omap2/*gpmc*
+
OMAP FRAMEBUFFER SUPPORT
M: Tomi Valkeinen <tomi.valkeinen@ti.com>
L: linux-fbdev@vger.kernel.org
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index f4d06aea8460..6e249324fdd7 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -79,7 +79,9 @@ config ARCH_OMAP2PLUS
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select MACH_OMAP_GENERIC
+ select MEMORY
select OMAP_DM_TIMER
+ select OMAP_GPMC
select PINCTRL
select SOC_BUS
select TI_PRIV_EDMA
@@ -235,12 +237,6 @@ config MACH_TOUCHBOOK
default y
select OMAP_PACKAGE_CBB
-config MACH_OMAP_3430SDP
- bool "OMAP 3430 SDP board"
- depends on ARCH_OMAP3
- default y
- select OMAP_PACKAGE_CBB
-
config MACH_NOKIA_N810
bool
@@ -282,16 +278,6 @@ config MACH_SBC3530
default y
select OMAP_PACKAGE_CUS
-config MACH_TI8168EVM
- bool "TI8168 Evaluation Module"
- depends on SOC_TI81XX
- default y
-
-config MACH_TI8148EVM
- bool "TI8148 Evaluation Module"
- depends on SOC_TI81XX
- default y
-
config OMAP3_EMU
bool "OMAP3 debugging peripherals"
depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 3b653b3ac268..08cc94474d17 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -6,7 +6,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
-I$(srctree)/arch/arm/plat-omap/include
# Common support
-obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \
+obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
omap_device.o sram.o drm.o
@@ -246,7 +246,6 @@ obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
obj-$(CONFIG_MACH_OVERO) += board-overo.o
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o
-obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o
@@ -260,8 +259,6 @@ obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o
obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o
-obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o
-obj-$(CONFIG_MACH_TI8148EVM) += board-ti8168evm.o
# Platform specific device init code
@@ -284,9 +281,6 @@ obj-y += $(onenand-m) $(onenand-y)
nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o
obj-y += $(nand-m) $(nand-y)
-smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o
-obj-y += $(smc91x-m) $(smc91x-y)
-
smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o
obj-y += $(smsc911x-m) $(smsc911x-y)
ifneq ($(CONFIG_HWSPINLOCK_OMAP),)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
deleted file mode 100644
index d21a3048d06b..000000000000
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ /dev/null
@@ -1,632 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-3430sdp.c
- *
- * Copyright (C) 2007 Texas Instruments
- *
- * Modified from mach-omap2/board-generic.c
- *
- * Initial code: Syed Mohammed Khasim
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/machine.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/omap-twl4030.h>
-#include <linux/usb/phy.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include <linux/omap-dma.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "gpmc.h"
-#include "gpmc-smc91x.h"
-
-#include "soc.h"
-#include "board-flash.h"
-#include "mux.h"
-#include "sdram-qimonda-hyb18m512160af-6.h"
-#include "hsmmc.h"
-#include "pm.h"
-#include "control.h"
-#include "common-board-devices.h"
-
-#define CONFIG_DISABLE_HFCLK 1
-
-#define SDP3430_TS_GPIO_IRQ_SDPV1 3
-#define SDP3430_TS_GPIO_IRQ_SDPV2 2
-
-#define ENABLE_VAUX3_DEDICATED 0x03
-#define ENABLE_VAUX3_DEV_GRP 0x20
-
-#define TWL4030_MSECURE_GPIO 22
-
-static uint32_t board_keymap[] = {
- KEY(0, 0, KEY_LEFT),
- KEY(0, 1, KEY_RIGHT),
- KEY(0, 2, KEY_A),
- KEY(0, 3, KEY_B),
- KEY(0, 4, KEY_C),
- KEY(1, 0, KEY_DOWN),
- KEY(1, 1, KEY_UP),
- KEY(1, 2, KEY_E),
- KEY(1, 3, KEY_F),
- KEY(1, 4, KEY_G),
- KEY(2, 0, KEY_ENTER),
- KEY(2, 1, KEY_I),
- KEY(2, 2, KEY_J),
- KEY(2, 3, KEY_K),
- KEY(2, 4, KEY_3),
- KEY(3, 0, KEY_M),
- KEY(3, 1, KEY_N),
- KEY(3, 2, KEY_O),
- KEY(3, 3, KEY_P),
- KEY(3, 4, KEY_Q),
- KEY(4, 0, KEY_R),
- KEY(4, 1, KEY_4),
- KEY(4, 2, KEY_T),
- KEY(4, 3, KEY_U),
- KEY(4, 4, KEY_D),
- KEY(5, 0, KEY_V),
- KEY(5, 1, KEY_W),
- KEY(5, 2, KEY_L),
- KEY(5, 3, KEY_S),
- KEY(5, 4, KEY_H),
- 0
-};
-
-static struct matrix_keymap_data board_map_data = {
- .keymap = board_keymap,
- .keymap_size = ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data sdp3430_kp_data = {
- .keymap_data = &board_map_data,
- .rows = 5,
- .cols = 6,
- .rep = 1,
-};
-
-#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8
-#define SDP3430_LCD_PANEL_ENABLE_GPIO 5
-
-static void __init sdp3430_display_init(void)
-{
- int r;
-
- /*
- * the backlight GPIO doesn't directly go to the panel, it enables
- * an internal circuit on 3430sdp to create the signal V_BKL_28V,
- * this is connected to LED+ pin of the sharp panel. This GPIO
- * is left enabled in the board file, and not passed to the panel
- * as platform_data.
- */
- r = gpio_request_one(SDP3430_LCD_PANEL_BACKLIGHT_GPIO,
- GPIOF_OUT_INIT_HIGH, "LCD Backlight");
- if (r)
- pr_err("failed to get LCD Backlight GPIO\n");
-
-}
-
-static struct panel_sharp_ls037v7dw01_platform_data sdp3430_lcd_pdata = {
- .name = "lcd",
- .source = "dpi.0",
-
- .data_lines = 16,
-
- .resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO,
- .ini_gpio = -1,
- .mo_gpio = -1,
- .lr_gpio = -1,
- .ud_gpio = -1,
-};
-
-static struct platform_device sdp3430_lcd_device = {
- .name = "panel-sharp-ls037v7dw01",
- .id = 0,
- .dev.platform_data = &sdp3430_lcd_pdata,
-};
-
-static struct connector_dvi_platform_data sdp3430_dvi_connector_pdata = {
- .name = "dvi",
- .source = "tfp410.0",
- .i2c_bus_num = -1,
-};
-
-static struct platform_device sdp3430_dvi_connector_device = {
- .name = "connector-dvi",
- .id = 0,
- .dev.platform_data = &sdp3430_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data sdp3430_tfp410_pdata = {
- .name = "tfp410.0",
- .source = "dpi.0",
- .data_lines = 24,
- .power_down_gpio = -1,
-};
-
-static struct platform_device sdp3430_tfp410_device = {
- .name = "tfp410",
- .id = 0,
- .dev.platform_data = &sdp3430_tfp410_pdata,
-};
-
-static struct connector_atv_platform_data sdp3430_tv_pdata = {
- .name = "tv",
- .source = "venc.0",
- .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .invert_polarity = false,
-};
-
-static struct platform_device sdp3430_tv_connector_device = {
- .name = "connector-analog-tv",
- .id = 0,
- .dev.platform_data = &sdp3430_tv_pdata,
-};
-
-static struct omap_dss_board_info sdp3430_dss_data = {
- .default_display_name = "lcd",
-};
-
-static struct omap2_hsmmc_info mmc[] = {
- {
- .mmc = 1,
- /* 8 bits (default) requires S6.3 == ON,
- * so the SIM card isn't used; else 4 bits.
- */
- .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
- .gpio_wp = 4,
- .deferred = true,
- },
- {
- .mmc = 2,
- .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
- .gpio_wp = 7,
- .deferred = true,
- },
- {} /* Terminator */
-};
-
-static struct omap_tw4030_pdata omap_twl4030_audio_data = {
- .voice_connected = true,
- .custom_routing = true,
-
- .has_hs = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
- .has_hf = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
-
- .has_mainmic = true,
- .has_submic = true,
- .has_hsmic = true,
- .has_linein = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
-};
-
-static int sdp3430_twl_gpio_setup(struct device *dev,
- unsigned gpio, unsigned ngpio)
-{
- /* gpio + 0 is "mmc0_cd" (input/IRQ),
- * gpio + 1 is "mmc1_cd" (input/IRQ)
- */
- mmc[0].gpio_cd = gpio + 0;
- mmc[1].gpio_cd = gpio + 1;
- omap_hsmmc_late_init(mmc);
-
- /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
- gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl");
-
- /* gpio + 15 is "sub_lcd_nRST" (output) */
- gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST");
-
- omap_twl4030_audio_data.jack_detect = gpio + 2;
- omap_twl4030_audio_init("SDP3430", &omap_twl4030_audio_data);
-
- return 0;
-}
-
-static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
- .pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13)
- | BIT(16) | BIT(17),
- .setup = sdp3430_twl_gpio_setup,
-};
-
-/* regulator consumer mappings */
-
-/* ads7846 on SPI */
-static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
- REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply sdp3430_vsim_supplies[] = {
- REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply sdp3430_vmmc2_supplies[] = {
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-/*
- * Apply all the fixed voltages since most versions of U-Boot
- * don't bother with that initialization.
- */
-
-/* VAUX1 for mainboard (irda and sub-lcd) */
-static struct regulator_init_data sdp3430_vaux1 = {
- .constraints = {
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-/* VAUX2 for camera module */
-static struct regulator_init_data sdp3430_vaux2 = {
- .constraints = {
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-/* VAUX3 for LCD board */
-static struct regulator_init_data sdp3430_vaux3 = {
- .constraints = {
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdp3430_vaux3_supplies),
- .consumer_supplies = sdp3430_vaux3_supplies,
-};
-
-/* VAUX4 for OMAP VDD_CSI2 (camera) */
-static struct regulator_init_data sdp3430_vaux4 = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data sdp3430_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdp3430_vmmc1_supplies),
- .consumer_supplies = sdp3430_vmmc1_supplies,
-};
-
-/* VMMC2 for MMC2 card */
-static struct regulator_init_data sdp3430_vmmc2 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 1850000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdp3430_vmmc2_supplies),
- .consumer_supplies = sdp3430_vmmc2_supplies,
-};
-
-/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
-static struct regulator_init_data sdp3430_vsim = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdp3430_vsim_supplies),
- .consumer_supplies = sdp3430_vsim_supplies,
-};
-
-static struct twl4030_platform_data sdp3430_twldata = {
- /* platform_data for children goes here */
- .gpio = &sdp3430_gpio_data,
- .keypad = &sdp3430_kp_data,
-
- .vaux1 = &sdp3430_vaux1,
- .vaux2 = &sdp3430_vaux2,
- .vaux3 = &sdp3430_vaux3,
- .vaux4 = &sdp3430_vaux4,
- .vmmc1 = &sdp3430_vmmc1,
- .vmmc2 = &sdp3430_vmmc2,
- .vsim = &sdp3430_vsim,
-};
-
-static int __init omap3430_i2c_init(void)
-{
- /* i2c1 for PMIC only */
- omap3_pmic_get_config(&sdp3430_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
- TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
- TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
- sdp3430_twldata.vdac->constraints.apply_uV = true;
- sdp3430_twldata.vpll2->constraints.apply_uV = true;
- sdp3430_twldata.vpll2->constraints.name = "VDVI";
-
- sdp3430_twldata.audio->codec->hs_extmute = 1;
- sdp3430_twldata.audio->codec->hs_extmute_gpio = -EINVAL;
-
- omap3_pmic_init("twl4030", &sdp3430_twldata);
-
- /* i2c2 on camera connector (for sensor control) and optional isp1301 */
- omap_register_i2c_bus(2, 400, NULL, 0);
- /* i2c3 on display connector (for DVI, tfp410) */
- omap_register_i2c_bus(3, 400, NULL, 0);
- return 0;
-}
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-
-static struct omap_smc91x_platform_data board_smc91x_data = {
- .cs = 3,
- .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
- IORESOURCE_IRQ_LOWLEVEL,
-};
-
-static void __init board_smc91x_init(void)
-{
- if (omap_rev() > OMAP3430_REV_ES1_0)
- board_smc91x_data.gpio_irq = 6;
- else
- board_smc91x_data.gpio_irq = 29;
-
- gpmc_smc91x_init(&board_smc91x_data);
-}
-
-#else
-
-static inline void board_smc91x_init(void)
-{
-}
-
-#endif
-
-static void enable_board_wakeup_source(void)
-{
- /* T2 interrupt line (keypad) */
- omap_mux_init_signal("sys_nirq",
- OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
- {
- .port = 1,
- .reset_gpio = 57,
- .vcc_gpio = -EINVAL,
- },
- {
- .port = 2,
- .reset_gpio = 61,
- .vcc_gpio = -EINVAL,
- },
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
- { .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define board_mux NULL
-#endif
-
-/*
- * SDP3430 V2 Board CS organization
- * Different from SDP3430 V1. Now 4 switches used to specify CS
- *
- * See also the Switch S8 settings in the comments.
- */
-static char chip_sel_3430[][GPMC_CS_NUM] = {
- {PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
- {PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
- {PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
-};
-
-static struct mtd_partition sdp_nor_partitions[] = {
- /* bootloader (U-Boot, etc) in first sector */
- {
- .name = "Bootloader-NOR",
- .offset = 0,
- .size = SZ_256K,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- /* bootloader params in the next sector */
- {
- .name = "Params-NOR",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_256K,
- .mask_flags = 0,
- },
- /* kernel */
- {
- .name = "Kernel-NOR",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M,
- .mask_flags = 0
- },
- /* file system */
- {
- .name = "Filesystem-NOR",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0
- }
-};
-
-static struct mtd_partition sdp_onenand_partitions[] = {
- {
- .name = "X-Loader-OneNAND",
- .offset = 0,
- .size = 4 * (64 * 2048),
- .mask_flags = MTD_WRITEABLE /* force read-only */
- },
- {
- .name = "U-Boot-OneNAND",
- .offset = MTDPART_OFS_APPEND,
- .size = 2 * (64 * 2048),
- .mask_flags = MTD_WRITEABLE /* force read-only */
- },
- {
- .name = "U-Boot Environment-OneNAND",
- .offset = MTDPART_OFS_APPEND,
- .size = 1 * (64 * 2048),
- },
- {
- .name = "Kernel-OneNAND",
- .offset = MTDPART_OFS_APPEND,
- .size = 16 * (64 * 2048),
- },
- {
- .name = "File System-OneNAND",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct mtd_partition sdp_nand_partitions[] = {
- /* All the partition sizes are listed in terms of NAND block size */
- {
- .name = "X-Loader-NAND",
- .offset = 0,
- .size = 4 * (64 * 2048),
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "U-Boot-NAND",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
- .size = 10 * (64 * 2048),
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "Boot Env-NAND",
-
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */
- .size = 6 * (64 * 2048),
- },
- {
- .name = "Kernel-NAND",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
- .size = 40 * (64 * 2048),
- },
- {
- .name = "File System - NAND",
- .size = MTDPART_SIZ_FULL,
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x780000 */
- },
-};
-
-static struct flash_partitions sdp_flash_partitions[] = {
- {
- .parts = sdp_nor_partitions,
- .nr_parts = ARRAY_SIZE(sdp_nor_partitions),
- },
- {
- .parts = sdp_onenand_partitions,
- .nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
- },
- {
- .parts = sdp_nand_partitions,
- .nr_parts = ARRAY_SIZE(sdp_nand_partitions),
- },
-};
-
-static void __init omap_3430sdp_init(void)
-{
- int gpio_pendown;
-
- omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- omap_hsmmc_init(mmc);
- omap3430_i2c_init();
- omap_display_init(&sdp3430_dss_data);
- platform_device_register(&sdp3430_lcd_device);
- platform_device_register(&sdp3430_tfp410_device);
- platform_device_register(&sdp3430_dvi_connector_device);
- platform_device_register(&sdp3430_tv_connector_device);
-
- if (omap_rev() > OMAP3430_REV_ES1_0)
- gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2;
- else
- gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
- omap_ads7846_init(1, gpio_pendown, 310, NULL);
- omap_serial_init();
- omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
- usb_musb_init(NULL);
- board_smc91x_init();
- board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
- sdp3430_display_init();
- enable_board_wakeup_source();
-
- usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
- usbhs_init(&usbhs_bdata);
-}
-
-MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
- /* Maintainer: Syed Khasim - Texas Instruments Inc */
- .atag_offset = 0x100,
- .reserve = omap_reserve,
- .map_io = omap3_map_io,
- .init_early = omap3430_init_early,
- .init_irq = omap3_init_irq,
- .init_machine = omap_3430sdp_init,
- .init_late = omap3430_init_late,
- .init_time = omap3_sync32k_timer_init,
- .restart = omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 212c3160de18..8168ddabaeda 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -24,6 +24,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/omap-gpmc.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index c6df8eec4553..91738a14ecbe 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -25,6 +25,7 @@
#include <linux/input/matrix_keypad.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/omap-gpmc.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/platform_data/at24.h>
@@ -51,8 +52,6 @@
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"
-#include "gpmc.h"
-#include "gpmc-nand.h"
#define CM_T35_GPIO_PENDOWN 57
#define SB_T35_USB_HUB_RESET_GPIO 167
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 8a2c1677964c..794756df8529 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -28,6 +28,7 @@
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/leds.h>
+#include <linux/omap-gpmc.h>
#include <linux/rtc-v3020.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -41,7 +42,6 @@
#include "common.h"
#include <linux/platform_data/mtd-nand-omap2.h>
-#include "gpmc.h"
#include "am35xx.h"
@@ -50,7 +50,6 @@
#include "hsmmc.h"
#include "common-board-devices.h"
#include "am35xx-emac.h"
-#include "gpmc-nand.h"
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led cm_t3517_leds[] = {
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 2d245c2e641c..70b21cc279ba 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -13,6 +13,7 @@
*/
#include <linux/kernel.h>
+#include <linux/omap-gpmc.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
@@ -23,8 +24,6 @@
#include "soc.h"
#include "common.h"
#include "board-flash.h"
-#include "gpmc-onenand.h"
-#include "gpmc-nand.h"
#define REG_FPGA_REV 0x10
#define REG_FPGA_DIP_SWITCH_INPUT2 0x60
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
index 2fb5d41a9fae..ea9aaebe11e7 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -12,7 +12,6 @@
*/
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include "gpmc.h"
#define PDC_NOR 1
#define PDC_NAND 2
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index e0ad64fde20e..b6443a4e0c78 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -23,7 +23,6 @@
#include <linux/usb/musb.h>
#include <linux/mmc/host.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
#include <linux/platform_data/mmc-omap.h>
#include <linux/mfd/menelaus.h>
#include <sound/tlv320aic3x.h>
@@ -34,7 +33,6 @@
#include "common.h"
#include "mmc.h"
#include "soc.h"
-#include "gpmc-onenand.h"
#include "common-board-devices.h"
#define TUSB6010_ASYNC_CS 1
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index f32201656cf3..7f1708738c30 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -24,6 +24,7 @@
#include <linux/spi/spi.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
+#include <linux/omap-gpmc.h>
#include <linux/wl12xx.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
@@ -51,7 +52,6 @@
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"
-#include "gpmc-nand.h"
#define PANDORA_WIFI_IRQ_GPIO 21
#define PANDORA_WIFI_NRESET_GPIO 23
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 3d5040f82e90..03502abe4f2e 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -23,6 +23,7 @@
#include <linux/regulator/machine.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
+#include <linux/omap-gpmc.h>
#include <linux/mmc/host.h>
#include <linux/power/isp1704_charger.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
@@ -32,7 +33,6 @@
#include "common.h"
#include <linux/omap-dma.h>
-#include "gpmc-smc91x.h"
#include "board-rx51.h"
@@ -55,8 +55,6 @@
#include "omap-pm.h"
#include "hsmmc.h"
#include "common-board-devices.h"
-#include "gpmc.h"
-#include "gpmc-onenand.h"
#include "soc.h"
#include "omap-secure.h"
@@ -1144,33 +1142,6 @@ static struct omap_onenand_platform_data board_onenand_data[] = {
};
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-
-static struct omap_smc91x_platform_data board_smc91x_data = {
- .cs = 1,
- .gpio_irq = 54,
- .gpio_pwrdwn = 86,
- .gpio_reset = 164,
- .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL,
-};
-
-static void __init board_smc91x_init(void)
-{
- omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_gpio(86, OMAP_PIN_OUTPUT);
- omap_mux_init_gpio(164, OMAP_PIN_OUTPUT);
-
- gpmc_smc91x_init(&board_smc91x_data);
-}
-
-#else
-
-static inline void board_smc91x_init(void)
-{
-}
-
-#endif
-
static struct gpio rx51_wl1251_gpios[] __initdata = {
{ RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" },
};
@@ -1301,7 +1272,6 @@ void __init rx51_peripherals_init(void)
rx51_i2c_init();
regulator_has_full_constraints();
gpmc_onenand_init(board_onenand_data);
- board_smc91x_init();
rx51_add_gpio_keys();
rx51_init_wl1251();
rx51_init_tsc2005();
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
deleted file mode 100644
index 6273c286e1d8..000000000000
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Code for TI8168/TI8148 EVM.
- *
- * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/usb/musb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-static struct omap_musb_board_data musb_board_data = {
- .set_phy_power = ti81xx_musb_phy_power,
- .interface_type = MUSB_INTERFACE_ULPI,
- .mode = MUSB_OTG,
- .power = 500,
-};
-
-static void __init ti81xx_evm_init(void)
-{
- omap_serial_init();
- omap_sdrc_init(NULL, NULL);
- usb_musb_init(&musb_board_data);
-}
-
-MACHINE_START(TI8168EVM, "ti8168evm")
- /* Maintainer: Texas Instruments */
- .atag_offset = 0x100,
- .map_io = ti81xx_map_io,
- .init_early = ti81xx_init_early,
- .init_irq = ti81xx_init_irq,
- .init_time = omap3_sync32k_timer_init,
- .init_machine = ti81xx_evm_init,
- .init_late = ti81xx_init_late,
- .restart = omap44xx_restart,
-MACHINE_END
-
-MACHINE_START(TI8148EVM, "ti8148evm")
- /* Maintainer: Texas Instruments */
- .atag_offset = 0x100,
- .map_io = ti81xx_map_io,
- .init_early = ti81xx_init_early,
- .init_irq = ti81xx_init_irq,
- .init_time = omap3_sync32k_timer_init,
- .init_machine = ti81xx_evm_init,
- .init_late = ti81xx_init_late,
- .restart = omap44xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 492ef1607115..a7bc4ce81e19 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -411,3 +411,29 @@ static int __init omap2_init_devices(void)
return 0;
}
omap_arch_initcall(omap2_init_devices);
+
+static int __init omap_gpmc_init(void)
+{
+ struct omap_hwmod *oh;
+ struct platform_device *pdev;
+ char *oh_name = "gpmc";
+
+ /*
+ * if the board boots up with a populated DT, do not
+ * manually add the device from this initcall
+ */
+ if (of_have_populated_dt())
+ return -ENODEV;
+
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ pr_err("Could not look up %s\n", oh_name);
+ return -ENODEV;
+ }
+
+ pdev = omap_device_build("omap-gpmc", -1, oh, NULL, 0);
+ WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
+
+ return PTR_RET(pdev);
+}
+omap_postcore_initcall(omap_gpmc_init);
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index cb7764314f17..d5951b17b736 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -12,14 +12,13 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/omap-gpmc.h>
#include <linux/mtd/nand.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include <asm/mach/flash.h>
-#include "gpmc.h"
#include "soc.h"
-#include "gpmc-nand.h"
/* minimum size for IO mapping */
#define NAND_IO_SIZE 4
diff --git a/arch/arm/mach-omap2/gpmc-nand.h b/arch/arm/mach-omap2/gpmc-nand.h
deleted file mode 100644
index d59e1281e851..000000000000
--- a/arch/arm/mach-omap2/gpmc-nand.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-omap2/gpmc-nand.h
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __OMAP2_GPMC_NAND_H
-#define __OMAP2_GPMC_NAND_H
-
-#include "gpmc.h"
-#include <linux/platform_data/mtd-nand-omap2.h>
-
-#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
-extern int gpmc_nand_init(struct omap_nand_platform_data *d,
- struct gpmc_timings *gpmc_t);
-#else
-static inline int gpmc_nand_init(struct omap_nand_platform_data *d,
- struct gpmc_timings *gpmc_t)
-{
- return 0;
-}
-#endif
-
-#endif
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 8b6876c98ce1..53d197e0c1f3 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -15,14 +15,13 @@
#include <linux/platform_device.h>
#include <linux/mtd/onenand_regs.h>
#include <linux/io.h>
+#include <linux/omap-gpmc.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
#include <linux/err.h>
#include <asm/mach/flash.h>
-#include "gpmc.h"
#include "soc.h"
-#include "gpmc-onenand.h"
#define ONENAND_IO_SIZE SZ_128K
diff --git a/arch/arm/mach-omap2/gpmc-onenand.h b/arch/arm/mach-omap2/gpmc-onenand.h
deleted file mode 100644
index 216f23a8b45c..000000000000
--- a/arch/arm/mach-omap2/gpmc-onenand.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-omap2/gpmc-onenand.h
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __OMAP2_GPMC_ONENAND_H
-#define __OMAP2_GPMC_ONENAND_H
-
-#include <linux/platform_data/mtd-onenand-omap2.h>
-
-#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
-extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
-#else
-#define board_onenand_data NULL
-static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
-{
-}
-#endif
-
-#endif
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
deleted file mode 100644
index 61a063595e66..000000000000
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/gpmc-smc91x.c
- *
- * Copyright (C) 2009 Nokia Corporation
- * Contact: Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/smc91x.h>
-
-#include "gpmc.h"
-#include "gpmc-smc91x.h"
-
-#include "soc.h"
-
-static struct omap_smc91x_platform_data *gpmc_cfg;
-
-static struct resource gpmc_smc91x_resources[] = {
- [0] = {
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smc91x_platdata gpmc_smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
- .leda = RPC_LED_100_10,
- .ledb = RPC_LED_TX_RX,
-};
-
-static struct platform_device gpmc_smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .dev = {
- .platform_data = &gpmc_smc91x_info,
- },
- .num_resources = ARRAY_SIZE(gpmc_smc91x_resources),
- .resource = gpmc_smc91x_resources,
-};
-
-static struct gpmc_settings smc91x_settings = {
- .device_width = GPMC_DEVWIDTH_16BIT,
-};
-
-/*
- * Set the gpmc timings for smc91c96. The timings are taken
- * from the data sheet available at:
- * http://www.smsc.com/main/catalog/lan91c96.html
- * REVISIT: Level shifters can add at least to the access latency.
- */
-static int smc91c96_gpmc_retime(void)
-{
- struct gpmc_timings t;
- struct gpmc_device_timings dev_t;
- const int t3 = 10; /* Figure 12.2 read and 12.4 write */
- const int t4_r = 20; /* Figure 12.2 read */
- const int t4_w = 5; /* Figure 12.4 write */
- const int t5 = 25; /* Figure 12.2 read */
- const int t6 = 15; /* Figure 12.2 read */
- const int t7 = 5; /* Figure 12.4 write */
- const int t8 = 5; /* Figure 12.4 write */
- const int t20 = 185; /* Figure 12.2 read and 12.4 write */
-
- /*
- * FIXME: Calculate the address and data bus muxed timings.
- * Note that at least adv_rd_off needs to be changed according
- * to omap3430 TRM Figure 11-11. Are the sdp boards using the
- * FPGA in between smc91x and omap as the timings are different
- * from above?
- */
- if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
- return 0;
-
- memset(&dev_t, 0, sizeof(dev_t));
-
- dev_t.t_oeasu = t3 * 1000;
- dev_t.t_oe = t5 * 1000;
- dev_t.t_cez_r = t4_r * 1000;
- dev_t.t_oez = t6 * 1000;
- dev_t.t_rd_cycle = (t20 - t3) * 1000;
-
- dev_t.t_weasu = t3 * 1000;
- dev_t.t_wpl = t7 * 1000;
- dev_t.t_wph = t8 * 1000;
- dev_t.t_cez_w = t4_w * 1000;
- dev_t.t_wr_cycle = (t20 - t3) * 1000;
-
- gpmc_calc_timings(&t, &smc91x_settings, &dev_t);
-
- return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
-}
-
-/*
- * Initialize smc91x device connected to the GPMC. Note that we
- * assume that pin multiplexing is done in the board-*.c file,
- * or in the bootloader.
- */
-void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
-{
- unsigned long cs_mem_base;
- int ret;
-
- gpmc_cfg = board_data;
-
- if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96)
- gpmc_cfg->retime = smc91c96_gpmc_retime;
-
- if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
- printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
- return;
- }
-
- gpmc_smc91x_resources[0].start = cs_mem_base + 0x300;
- gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
- gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
-
- if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
- smc91x_settings.mux_add_data = GPMC_MUX_AD;
- if (gpmc_cfg->flags & GPMC_READ_MON)
- smc91x_settings.wait_on_read = true;
- if (gpmc_cfg->flags & GPMC_WRITE_MON)
- smc91x_settings.wait_on_write = true;
- if (gpmc_cfg->wait_pin)
- smc91x_settings.wait_pin = gpmc_cfg->wait_pin;
- ret = gpmc_cs_program_settings(gpmc_cfg->cs, &smc91x_settings);
- if (ret < 0)
- goto free1;
-
- if (gpmc_cfg->retime) {
- ret = gpmc_cfg->retime();
- if (ret != 0)
- goto free1;
- }
-
- if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "SMC91X irq") < 0)
- goto free1;
-
- gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
-
- if (gpmc_cfg->gpio_pwrdwn) {
- ret = gpio_request_one(gpmc_cfg->gpio_pwrdwn,
- GPIOF_OUT_INIT_LOW, "SMC91X powerdown");
- if (ret)
- goto free2;
- }
-
- if (gpmc_cfg->gpio_reset) {
- ret = gpio_request_one(gpmc_cfg->gpio_reset,
- GPIOF_OUT_INIT_LOW, "SMC91X reset");
- if (ret)
- goto free3;
-
- gpio_set_value(gpmc_cfg->gpio_reset, 1);
- msleep(100);
- gpio_set_value(gpmc_cfg->gpio_reset, 0);
- }
-
- if (platform_device_register(&gpmc_smc91x_device) < 0) {
- printk(KERN_ERR "Unable to register smc91x device\n");
- gpio_free(gpmc_cfg->gpio_reset);
- goto free3;
- }
-
- return;
-
-free3:
- if (gpmc_cfg->gpio_pwrdwn)
- gpio_free(gpmc_cfg->gpio_pwrdwn);
-free2:
- gpio_free(gpmc_cfg->gpio_irq);
-free1:
- gpmc_cs_free(gpmc_cfg->cs);
-
- printk(KERN_ERR "Could not initialize smc91x\n");
-}
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.h b/arch/arm/mach-omap2/gpmc-smc91x.h
deleted file mode 100644
index b64fbee4d567..000000000000
--- a/arch/arm/mach-omap2/gpmc-smc91x.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/gpmc-smc91x.h
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__
-
-#define GPMC_TIMINGS_SMC91C96 (1 << 4)
-#define GPMC_MUX_ADD_DATA (1 << 5) /* GPMC_CONFIG1_MUXADDDATA */
-#define GPMC_READ_MON (1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */
-#define GPMC_WRITE_MON (1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */
-
-struct omap_smc91x_platform_data {
- int cs;
- int gpio_irq;
- int gpio_pwrdwn;
- int gpio_reset;
- int wait_pin; /* Optional GPMC_CONFIG1_WAITPINSELECT */
- u32 flags;
- int (*retime)(void);
-};
-
-#if defined(CONFIG_SMC91X) || \
- defined(CONFIG_SMC91X_MODULE)
-
-extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d);
-
-#else
-
-#define board_smc91x_data NULL
-
-static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d)
-{
-}
-
-#endif
-#endif
diff --git a/arch/arm/mach-omap2/gpmc.h b/arch/arm/mach-omap2/gpmc.h
index 707f6d58edd5..9caa41a6cb04 100644
--- a/arch/arm/mach-omap2/gpmc.h
+++ b/arch/arm/mach-omap2/gpmc.h
@@ -6,226 +6,9 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
+ *
+ * Do not include this file in any new code, this will get removed
+ * once omap3 boots in device tree only mode.
+ *
*/
-
-#ifndef __OMAP2_GPMC_H
-#define __OMAP2_GPMC_H
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-
-/* Maximum Number of Chip Selects */
-#define GPMC_CS_NUM 8
-
-#define GPMC_CS_CONFIG1 0x00
-#define GPMC_CS_CONFIG2 0x04
-#define GPMC_CS_CONFIG3 0x08
-#define GPMC_CS_CONFIG4 0x0c
-#define GPMC_CS_CONFIG5 0x10
-#define GPMC_CS_CONFIG6 0x14
-#define GPMC_CS_CONFIG7 0x18
-#define GPMC_CS_NAND_COMMAND 0x1c
-#define GPMC_CS_NAND_ADDRESS 0x20
-#define GPMC_CS_NAND_DATA 0x24
-
-/* Control Commands */
-#define GPMC_CONFIG_RDY_BSY 0x00000001
-#define GPMC_CONFIG_DEV_SIZE 0x00000002
-#define GPMC_CONFIG_DEV_TYPE 0x00000003
-#define GPMC_SET_IRQ_STATUS 0x00000004
-#define GPMC_CONFIG_WP 0x00000005
-
-#define GPMC_ENABLE_IRQ 0x0000000d
-
-/* ECC commands */
-#define GPMC_ECC_READ 0 /* Reset Hardware ECC for read */
-#define GPMC_ECC_WRITE 1 /* Reset Hardware ECC for write */
-#define GPMC_ECC_READSYN 2 /* Reset before syndrom is read back */
-
-#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
-#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)
-#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29)
-#define GPMC_CONFIG1_READTYPE_SYNC (1 << 29)
-#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28)
-#define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27)
-#define GPMC_CONFIG1_WRITETYPE_SYNC (1 << 27)
-#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
-#define GPMC_CONFIG1_PAGE_LEN(val) ((val & 3) << 23)
-#define GPMC_CONFIG1_WAIT_READ_MON (1 << 22)
-#define GPMC_CONFIG1_WAIT_WRITE_MON (1 << 21)
-#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
-#define GPMC_CONFIG1_WAIT_PIN_SEL(val) ((val & 3) << 16)
-#define GPMC_CONFIG1_DEVICESIZE(val) ((val & 3) << 12)
-#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1)
-#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10)
-#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0)
-#define GPMC_CONFIG1_MUXTYPE(val) ((val & 3) << 8)
-#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4)
-#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3)
-#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1))
-#define GPMC_CONFIG1_FCLK_DIV3 (GPMC_CONFIG1_FCLK_DIV(2))
-#define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3))
-#define GPMC_CONFIG7_CSVALID (1 << 6)
-
-#define GPMC_DEVICETYPE_NOR 0
-#define GPMC_DEVICETYPE_NAND 2
-#define GPMC_CONFIG_WRITEPROTECT 0x00000010
-#define WR_RD_PIN_MONITORING 0x00600000
-#define GPMC_IRQ_FIFOEVENTENABLE 0x01
-#define GPMC_IRQ_COUNT_EVENT 0x02
-
-#define GPMC_BURST_4 4 /* 4 word burst */
-#define GPMC_BURST_8 8 /* 8 word burst */
-#define GPMC_BURST_16 16 /* 16 word burst */
-#define GPMC_DEVWIDTH_8BIT 1 /* 8-bit device width */
-#define GPMC_DEVWIDTH_16BIT 2 /* 16-bit device width */
-#define GPMC_MUX_AAD 1 /* Addr-Addr-Data multiplex */
-#define GPMC_MUX_AD 2 /* Addr-Data multiplex */
-
-/* bool type time settings */
-struct gpmc_bool_timings {
- bool cycle2cyclediffcsen;
- bool cycle2cyclesamecsen;
- bool we_extra_delay;
- bool oe_extra_delay;
- bool adv_extra_delay;
- bool cs_extra_delay;
- bool time_para_granularity;
-};
-
-/*
- * Note that all values in this struct are in nanoseconds except sync_clk
- * (which is in picoseconds), while the register values are in gpmc_fck cycles.
- */
-struct gpmc_timings {
- /* Minimum clock period for synchronous mode (in picoseconds) */
- u32 sync_clk;
-
- /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
- u32 cs_on; /* Assertion time */
- u32 cs_rd_off; /* Read deassertion time */
- u32 cs_wr_off; /* Write deassertion time */
-
- /* ADV signal timings corresponding to GPMC_CONFIG3 */
- u32 adv_on; /* Assertion time */
- u32 adv_rd_off; /* Read deassertion time */
- u32 adv_wr_off; /* Write deassertion time */
-
- /* WE signals timings corresponding to GPMC_CONFIG4 */
- u32 we_on; /* WE assertion time */
- u32 we_off; /* WE deassertion time */
-
- /* OE signals timings corresponding to GPMC_CONFIG4 */
- u32 oe_on; /* OE assertion time */
- u32 oe_off; /* OE deassertion time */
-
- /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
- u32 page_burst_access; /* Multiple access word delay */
- u32 access; /* Start-cycle to first data valid delay */
- u32 rd_cycle; /* Total read cycle time */
- u32 wr_cycle; /* Total write cycle time */
-
- u32 bus_turnaround;
- u32 cycle2cycle_delay;
-
- u32 wait_monitoring;
- u32 clk_activation;
-
- /* The following are only on OMAP3430 */
- u32 wr_access; /* WRACCESSTIME */
- u32 wr_data_mux_bus; /* WRDATAONADMUXBUS */
-
- struct gpmc_bool_timings bool_timings;
-};
-
-/* Device timings in picoseconds */
-struct gpmc_device_timings {
- u32 t_ceasu; /* address setup to CS valid */
- u32 t_avdasu; /* address setup to ADV valid */
- /* XXX: try to combine t_avdp_r & t_avdp_w. Issue is
- * of tusb using these timings even for sync whilst
- * ideally for adv_rd/(wr)_off it should have considered
- * t_avdh instead. This indirectly necessitates r/w
- * variations of t_avdp as it is possible to have one
- * sync & other async
- */
- u32 t_avdp_r; /* ADV low time (what about t_cer ?) */
- u32 t_avdp_w;
- u32 t_aavdh; /* address hold time */
- u32 t_oeasu; /* address setup to OE valid */
- u32 t_aa; /* access time from ADV assertion */
- u32 t_iaa; /* initial access time */
- u32 t_oe; /* access time from OE assertion */
- u32 t_ce; /* access time from CS asertion */
- u32 t_rd_cycle; /* read cycle time */
- u32 t_cez_r; /* read CS deassertion to high Z */
- u32 t_cez_w; /* write CS deassertion to high Z */
- u32 t_oez; /* OE deassertion to high Z */
- u32 t_weasu; /* address setup to WE valid */
- u32 t_wpl; /* write assertion time */
- u32 t_wph; /* write deassertion time */
- u32 t_wr_cycle; /* write cycle time */
-
- u32 clk;
- u32 t_bacc; /* burst access valid clock to output delay */
- u32 t_ces; /* CS setup time to clk */
- u32 t_avds; /* ADV setup time to clk */
- u32 t_avdh; /* ADV hold time from clk */
- u32 t_ach; /* address hold time from clk */
- u32 t_rdyo; /* clk to ready valid */
-
- u32 t_ce_rdyz; /* XXX: description ?, or use t_cez instead */
- u32 t_ce_avd; /* CS on to ADV on delay */
-
- /* XXX: check the possibility of combining
- * cyc_aavhd_oe & cyc_aavdh_we
- */
- u8 cyc_aavdh_oe;/* read address hold time in cycles */
- u8 cyc_aavdh_we;/* write address hold time in cycles */
- u8 cyc_oe; /* access time from OE assertion in cycles */
- u8 cyc_wpl; /* write deassertion time in cycles */
- u32 cyc_iaa; /* initial access time in cycles */
-
- /* extra delays */
- bool ce_xdelay;
- bool avd_xdelay;
- bool oe_xdelay;
- bool we_xdelay;
-};
-
-struct gpmc_settings {
- bool burst_wrap; /* enables wrap bursting */
- bool burst_read; /* enables read page/burst mode */
- bool burst_write; /* enables write page/burst mode */
- bool device_nand; /* device is NAND */
- bool sync_read; /* enables synchronous reads */
- bool sync_write; /* enables synchronous writes */
- bool wait_on_read; /* monitor wait on reads */
- bool wait_on_write; /* monitor wait on writes */
- u32 burst_len; /* page/burst length */
- u32 device_width; /* device bus width (8 or 16 bit) */
- u32 mux_add_data; /* multiplex address & data */
- u32 wait_pin; /* wait-pin to be used */
-};
-
-extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_settings *gpmc_s,
- struct gpmc_device_timings *dev_t);
-
-extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
-extern int gpmc_get_client_irq(unsigned irq_config);
-
-extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
-
-extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
-extern int gpmc_calc_divider(unsigned int sync_clk);
-extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
-extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p);
-extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
-extern void gpmc_cs_free(int cs);
-extern void omap3_gpmc_save_context(void);
-extern void omap3_gpmc_restore_context(void);
-extern int gpmc_configure(int cmd, int wval);
-extern void gpmc_read_settings_dt(struct device_node *np,
- struct gpmc_settings *p);
-
-#endif
+#include <linux/omap-gpmc.h>
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 175564c88a30..88721df6001d 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -29,6 +29,7 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/omap-dma.h>
+#include <linux/omap-gpmc.h>
#include <linux/platform_data/gpio-omap.h>
#include <trace/events/power.h>
@@ -43,7 +44,6 @@
#include "common.h"
#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
-#include "gpmc.h"
#include "prm-regbits-34xx.h"
#include "prm3xxx.h"
#include "pm.h"
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index 08bd4cfca2a4..191383d8c94d 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -41,6 +41,14 @@ config TI_EMIF
parameters and other settings during frequency, voltage and
temperature changes
+config OMAP_GPMC
+ bool
+ help
+ This driver is for the General Purpose Memory Controller (GPMC)
+ present on Texas Instruments SoCs (e.g. OMAP2+). GPMC allows
+ interfacing to a variety of asynchronous as well as synchronous
+ memory drives like NOR, NAND, OneNAND, SRAM.
+
config MVEBU_DEVBUS
bool "Marvell EBU Device Bus Controller"
default y
diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
index ad98bb232623..6b6548124473 100644
--- a/drivers/memory/Makefile
+++ b/drivers/memory/Makefile
@@ -8,6 +8,7 @@ endif
obj-$(CONFIG_ATMEL_SDRAMC) += atmel-sdramc.o
obj-$(CONFIG_TI_AEMIF) += ti-aemif.o
obj-$(CONFIG_TI_EMIF) += emif.o
+obj-$(CONFIG_OMAP_GPMC) += omap-gpmc.o
obj-$(CONFIG_FSL_CORENET_CF) += fsl-corenet-cf.o
obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
obj-$(CONFIG_MVEBU_DEVBUS) += mvebu-devbus.o
diff --git a/arch/arm/mach-omap2/gpmc.c b/drivers/memory/omap-gpmc.c
index 8fb5bbce102f..ffc5e60c0664 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -29,20 +29,15 @@
#include <linux/of_address.h>
#include <linux/of_mtd.h>
#include <linux/of_device.h>
+#include <linux/omap-gpmc.h>
#include <linux/mtd/nand.h>
#include <linux/pm_runtime.h>
#include <linux/platform_data/mtd-nand-omap2.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
#include <asm/mach-types.h>
-#include "soc.h"
-#include "common.h"
-#include "omap_device.h"
-#include "gpmc.h"
-#include "gpmc-nand.h"
-#include "gpmc-onenand.h"
-
#define DEVICE_NAME "omap-gpmc"
/* GPMC register offsets */
@@ -85,6 +80,8 @@
#define GPMC_ECC_CTRL_ECCREG8 0x008
#define GPMC_ECC_CTRL_ECCREG9 0x009
+#define GPMC_CONFIG_LIMITEDADDRESS BIT(1)
+
#define GPMC_CONFIG2_CSEXTRADELAY BIT(7)
#define GPMC_CONFIG3_ADVEXTRADELAY BIT(7)
#define GPMC_CONFIG4_OEEXTRADELAY BIT(7)
@@ -114,10 +111,73 @@
#define GPMC_NR_WAITPINS 4
+#define GPMC_CS_CONFIG1 0x00
+#define GPMC_CS_CONFIG2 0x04
+#define GPMC_CS_CONFIG3 0x08
+#define GPMC_CS_CONFIG4 0x0c
+#define GPMC_CS_CONFIG5 0x10
+#define GPMC_CS_CONFIG6 0x14
+#define GPMC_CS_CONFIG7 0x18
+#define GPMC_CS_NAND_COMMAND 0x1c
+#define GPMC_CS_NAND_ADDRESS 0x20
+#define GPMC_CS_NAND_DATA 0x24
+
+/* Control Commands */
+#define GPMC_CONFIG_RDY_BSY 0x00000001
+#define GPMC_CONFIG_DEV_SIZE 0x00000002
+#define GPMC_CONFIG_DEV_TYPE 0x00000003
+#define GPMC_SET_IRQ_STATUS 0x00000004
+
+#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
+#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)
+#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29)
+#define GPMC_CONFIG1_READTYPE_SYNC (1 << 29)
+#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28)
+#define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27)
+#define GPMC_CONFIG1_WRITETYPE_SYNC (1 << 27)
+#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
+#define GPMC_CONFIG1_PAGE_LEN(val) ((val & 3) << 23)
+#define GPMC_CONFIG1_WAIT_READ_MON (1 << 22)
+#define GPMC_CONFIG1_WAIT_WRITE_MON (1 << 21)
+#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
+#define GPMC_CONFIG1_WAIT_PIN_SEL(val) ((val & 3) << 16)
+#define GPMC_CONFIG1_DEVICESIZE(val) ((val & 3) << 12)
+#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1)
+#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10)
+#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0)
+#define GPMC_CONFIG1_MUXTYPE(val) ((val & 3) << 8)
+#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4)
+#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3)
+#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1))
+#define GPMC_CONFIG1_FCLK_DIV3 (GPMC_CONFIG1_FCLK_DIV(2))
+#define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3))
+#define GPMC_CONFIG7_CSVALID (1 << 6)
+
+#define GPMC_DEVICETYPE_NOR 0
+#define GPMC_DEVICETYPE_NAND 2
+#define GPMC_CONFIG_WRITEPROTECT 0x00000010
+#define WR_RD_PIN_MONITORING 0x00600000
+
+#define GPMC_ENABLE_IRQ 0x0000000d
+
+/* ECC commands */
+#define GPMC_ECC_READ 0 /* Reset Hardware ECC for read */
+#define GPMC_ECC_WRITE 1 /* Reset Hardware ECC for write */
+#define GPMC_ECC_READSYN 2 /* Reset before syndrom is read back */
+
/* XXX: Only NAND irq has been considered,currently these are the only ones used
*/
#define GPMC_NR_IRQ 2
+struct gpmc_cs_data {
+ const char *name;
+
+#define GPMC_CS_RESERVED (1 << 0)
+ u32 flags;
+
+ struct resource mem;
+};
+
struct gpmc_client_irq {
unsigned irq;
u32 bitmask;
@@ -155,10 +215,9 @@ static struct irq_chip gpmc_irq_chip;
static int gpmc_irq_start;
static struct resource gpmc_mem_root;
-static struct resource gpmc_cs_mem[GPMC_CS_NUM];
+static struct gpmc_cs_data gpmc_cs[GPMC_CS_NUM];
static DEFINE_SPINLOCK(gpmc_mem_lock);
/* Define chip-selects as reserved by default until probe completes */
-static unsigned int gpmc_cs_map = ((1 << GPMC_CS_NUM) - 1);
static unsigned int gpmc_cs_num = GPMC_CS_NUM;
static unsigned int gpmc_nr_waitpins;
static struct device *gpmc_dev;
@@ -202,11 +261,6 @@ static unsigned long gpmc_get_fclk_period(void)
{
unsigned long rate = clk_get_rate(gpmc_l3_clk);
- if (rate == 0) {
- printk(KERN_WARNING "gpmc_l3_clk not enabled\n");
- return 0;
- }
-
rate /= 1000;
rate = 1000000000 / rate; /* In picoseconds */
@@ -284,12 +338,130 @@ static void gpmc_cs_bool_timings(int cs, const struct gpmc_bool_timings *p)
}
#ifdef DEBUG
-static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
- int time, const char *name)
+static int get_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
+ bool raw, bool noval, int shift,
+ const char *name)
+{
+ u32 l;
+ int nr_bits, max_value, mask;
+
+ l = gpmc_cs_read_reg(cs, reg);
+ nr_bits = end_bit - st_bit + 1;
+ max_value = (1 << nr_bits) - 1;
+ mask = max_value << st_bit;
+ l = (l & mask) >> st_bit;
+ if (shift)
+ l = (shift << l);
+ if (noval && (l == 0))
+ return 0;
+ if (!raw) {
+ unsigned int time_ns_min, time_ns, time_ns_max;
+
+ time_ns_min = gpmc_ticks_to_ns(l ? l - 1 : 0);
+ time_ns = gpmc_ticks_to_ns(l);
+ time_ns_max = gpmc_ticks_to_ns(l + 1 > max_value ?
+ max_value : l + 1);
+ pr_info("gpmc,%s = <%u> (%u - %u ns, %i ticks)\n",
+ name, time_ns, time_ns_min, time_ns_max, l);
+ } else {
+ pr_info("gpmc,%s = <%u>\n", name, l);
+ }
+
+ return l;
+}
+
+#define GPMC_PRINT_CONFIG(cs, config) \
+ pr_info("cs%i %s: 0x%08x\n", cs, #config, \
+ gpmc_cs_read_reg(cs, config))
+#define GPMC_GET_RAW(reg, st, end, field) \
+ get_gpmc_timing_reg(cs, (reg), (st), (end), 1, 0, 0, field)
+#define GPMC_GET_RAW_BOOL(reg, st, end, field) \
+ get_gpmc_timing_reg(cs, (reg), (st), (end), 1, 1, 0, field)
+#define GPMC_GET_RAW_SHIFT(reg, st, end, shift, field) \
+ get_gpmc_timing_reg(cs, (reg), (st), (end), 1, 1, (shift), field)
+#define GPMC_GET_TICKS(reg, st, end, field) \
+ get_gpmc_timing_reg(cs, (reg), (st), (end), 0, 0, 0, field)
+
+static void gpmc_show_regs(int cs, const char *desc)
+{
+ pr_info("gpmc cs%i %s:\n", cs, desc);
+ GPMC_PRINT_CONFIG(cs, GPMC_CS_CONFIG1);
+ GPMC_PRINT_CONFIG(cs, GPMC_CS_CONFIG2);
+ GPMC_PRINT_CONFIG(cs, GPMC_CS_CONFIG3);
+ GPMC_PRINT_CONFIG(cs, GPMC_CS_CONFIG4);
+ GPMC_PRINT_CONFIG(cs, GPMC_CS_CONFIG5);
+ GPMC_PRINT_CONFIG(cs, GPMC_CS_CONFIG6);
+}
+
+/*
+ * Note that gpmc,wait-pin handing wrongly assumes bit 8 is available,
+ * see commit c9fb809.
+ */
+static void gpmc_cs_show_timings(int cs, const char *desc)
+{
+ gpmc_show_regs(cs, desc);
+
+ pr_info("gpmc cs%i access configuration:\n", cs);
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 4, 4, "time-para-granularity");
+ GPMC_GET_RAW(GPMC_CS_CONFIG1, 8, 9, "mux-add-data");
+ GPMC_GET_RAW(GPMC_CS_CONFIG1, 12, 13, "device-width");
+ GPMC_GET_RAW(GPMC_CS_CONFIG1, 16, 17, "wait-pin");
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 21, 21, "wait-on-write");
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 22, 22, "wait-on-read");
+ GPMC_GET_RAW_SHIFT(GPMC_CS_CONFIG1, 23, 24, 4, "burst-length");
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 27, 27, "sync-write");
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 28, 28, "burst-write");
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 29, 29, "gpmc,sync-read");
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 30, 30, "burst-read");
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 31, 31, "burst-wrap");
+
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG2, 7, 7, "cs-extra-delay");
+
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG3, 7, 7, "adv-extra-delay");
+
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG4, 23, 23, "we-extra-delay");
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG4, 7, 7, "oe-extra-delay");
+
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG6, 7, 7, "cycle2cycle-samecsen");
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG6, 6, 6, "cycle2cycle-diffcsen");
+
+ pr_info("gpmc cs%i timings configuration:\n", cs);
+ GPMC_GET_TICKS(GPMC_CS_CONFIG2, 0, 3, "cs-on-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG2, 8, 12, "cs-rd-off-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG2, 16, 20, "cs-wr-off-ns");
+
+ GPMC_GET_TICKS(GPMC_CS_CONFIG3, 0, 3, "adv-on-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG3, 8, 12, "adv-rd-off-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG3, 16, 20, "adv-wr-off-ns");
+
+ GPMC_GET_TICKS(GPMC_CS_CONFIG4, 0, 3, "oe-on-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG4, 8, 12, "oe-off-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG4, 16, 19, "we-on-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG4, 24, 28, "we-off-ns");
+
+ GPMC_GET_TICKS(GPMC_CS_CONFIG5, 0, 4, "rd-cycle-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG5, 8, 12, "wr-cycle-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG5, 16, 20, "access-ns");
+
+ GPMC_GET_TICKS(GPMC_CS_CONFIG5, 24, 27, "page-burst-access-ns");
+
+ GPMC_GET_TICKS(GPMC_CS_CONFIG6, 0, 3, "bus-turnaround-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG6, 8, 11, "cycle2cycle-delay-ns");
+
+ GPMC_GET_TICKS(GPMC_CS_CONFIG1, 18, 19, "wait-monitoring-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG1, 25, 26, "clk-activation-ns");
+
+ GPMC_GET_TICKS(GPMC_CS_CONFIG6, 16, 19, "wr-data-mux-bus-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG6, 24, 28, "wr-access-ns");
+}
#else
-static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
- int time)
+static inline void gpmc_cs_show_timings(int cs, const char *desc)
+{
+}
#endif
+
+static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
+ int time, const char *name)
{
u32 l;
int ticks, mask, nr_bits;
@@ -299,15 +471,15 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
else
ticks = gpmc_ns_to_ticks(time);
nr_bits = end_bit - st_bit + 1;
- if (ticks >= 1 << nr_bits) {
-#ifdef DEBUG
- printk(KERN_INFO "GPMC CS%d: %-10s* %3d ns, %3d ticks >= %d\n",
- cs, name, time, ticks, 1 << nr_bits);
-#endif
+ mask = (1 << nr_bits) - 1;
+
+ if (ticks > mask) {
+ pr_err("%s: GPMC error! CS%d: %s: %d ns, %d ticks > %d\n",
+ __func__, cs, name, time, ticks, mask);
+
return -1;
}
- mask = (1 << nr_bits) - 1;
l = gpmc_cs_read_reg(cs, reg);
#ifdef DEBUG
printk(KERN_INFO
@@ -322,16 +494,10 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
return 0;
}
-#ifdef DEBUG
#define GPMC_SET_ONE(reg, st, end, field) \
if (set_gpmc_timing_reg(cs, (reg), (st), (end), \
t->field, #field) < 0) \
return -1
-#else
-#define GPMC_SET_ONE(reg, st, end, field) \
- if (set_gpmc_timing_reg(cs, (reg), (st), (end), t->field) < 0) \
- return -1
-#endif
int gpmc_calc_divider(unsigned int sync_clk)
{
@@ -353,6 +519,7 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
int div;
u32 l;
+ gpmc_cs_show_timings(cs, "before gpmc_cs_set_timings");
div = gpmc_calc_divider(t->sync_clk);
if (div < 0)
return div;
@@ -402,11 +569,12 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
}
gpmc_cs_bool_timings(cs, &t->bool_timings);
+ gpmc_cs_show_timings(cs, "after gpmc_cs_set_timings");
return 0;
}
-static int gpmc_cs_enable_mem(int cs, u32 base, u32 size)
+static int gpmc_cs_set_memconf(int cs, u32 base, u32 size)
{
u32 l;
u32 mask;
@@ -430,6 +598,15 @@ static int gpmc_cs_enable_mem(int cs, u32 base, u32 size)
return 0;
}
+static void gpmc_cs_enable_mem(int cs)
+{
+ u32 l;
+
+ l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+ l |= GPMC_CONFIG7_CSVALID;
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
+}
+
static void gpmc_cs_disable_mem(int cs)
{
u32 l;
@@ -460,13 +637,30 @@ static int gpmc_cs_mem_enabled(int cs)
static void gpmc_cs_set_reserved(int cs, int reserved)
{
- gpmc_cs_map &= ~(1 << cs);
- gpmc_cs_map |= (reserved ? 1 : 0) << cs;
+ struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
+
+ gpmc->flags |= GPMC_CS_RESERVED;
}
static bool gpmc_cs_reserved(int cs)
{
- return gpmc_cs_map & (1 << cs);
+ struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
+
+ return gpmc->flags & GPMC_CS_RESERVED;
+}
+
+static void gpmc_cs_set_name(int cs, const char *name)
+{
+ struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
+
+ gpmc->name = name;
+}
+
+const char *gpmc_cs_get_name(int cs)
+{
+ struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
+
+ return gpmc->name;
}
static unsigned long gpmc_mem_align(unsigned long size)
@@ -485,7 +679,8 @@ static unsigned long gpmc_mem_align(unsigned long size)
static int gpmc_cs_insert_mem(int cs, unsigned long base, unsigned long size)
{
- struct resource *res = &gpmc_cs_mem[cs];
+ struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
+ struct resource *res = &gpmc->mem;
int r;
size = gpmc_mem_align(size);
@@ -500,7 +695,8 @@ static int gpmc_cs_insert_mem(int cs, unsigned long base, unsigned long size)
static int gpmc_cs_delete_mem(int cs)
{
- struct resource *res = &gpmc_cs_mem[cs];
+ struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
+ struct resource *res = &gpmc->mem;
int r;
spin_lock(&gpmc_mem_lock);
@@ -541,23 +737,24 @@ static int gpmc_cs_remap(int cs, u32 base)
gpmc_cs_get_memconf(cs, &old_base, &size);
if (base == old_base)
return 0;
- gpmc_cs_disable_mem(cs);
+
ret = gpmc_cs_delete_mem(cs);
if (ret < 0)
return ret;
+
ret = gpmc_cs_insert_mem(cs, base, size);
if (ret < 0)
return ret;
- ret = gpmc_cs_enable_mem(cs, base, size);
- if (ret < 0)
- return ret;
- return 0;
+ ret = gpmc_cs_set_memconf(cs, base, size);
+
+ return ret;
}
int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
{
- struct resource *res = &gpmc_cs_mem[cs];
+ struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
+ struct resource *res = &gpmc->mem;
int r = -1;
if (cs > gpmc_cs_num) {
@@ -581,12 +778,17 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
if (r < 0)
goto out;
- r = gpmc_cs_enable_mem(cs, res->start, resource_size(res));
+ /* Disable CS while changing base address and size mask */
+ gpmc_cs_disable_mem(cs);
+
+ r = gpmc_cs_set_memconf(cs, res->start, resource_size(res));
if (r < 0) {
release_resource(res);
goto out;
}
+ /* Enable CS */
+ gpmc_cs_enable_mem(cs);
*base = res->start;
gpmc_cs_set_reserved(cs, 1);
out:
@@ -597,7 +799,8 @@ EXPORT_SYMBOL(gpmc_cs_request);
void gpmc_cs_free(int cs)
{
- struct resource *res = &gpmc_cs_mem[cs];
+ struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
+ struct resource *res = &gpmc->mem;
spin_lock(&gpmc_mem_lock);
if (cs >= gpmc_cs_num || cs < 0 || !gpmc_cs_reserved(cs)) {
@@ -1509,7 +1712,9 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
struct gpmc_timings gpmc_t;
struct resource res;
unsigned long base;
+ const char *name;
int ret, cs;
+ u32 val;
if (of_property_read_u32(child, "reg", &cs) < 0) {
dev_err(&pdev->dev, "%s has no 'reg' property\n",
@@ -1523,28 +1728,41 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
return -ENODEV;
}
+ /*
+ * Check if we have multiple instances of the same device
+ * on a single chip select. If so, use the already initialized
+ * timings.
+ */
+ name = gpmc_cs_get_name(cs);
+ if (name && child->name && of_node_cmp(child->name, name) == 0)
+ goto no_timings;
+
ret = gpmc_cs_request(cs, resource_size(&res), &base);
if (ret < 0) {
dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs);
return ret;
}
+ gpmc_cs_set_name(cs, child->name);
+
+ gpmc_read_settings_dt(child, &gpmc_s);
+ gpmc_read_timings_dt(child, &gpmc_t);
/*
* For some GPMC devices we still need to rely on the bootloader
- * timings because the devices can be connected via FPGA. So far
- * the list is smc91x on the omap2 SDP boards, and 8250 on zooms.
- * REVISIT: Add timing support from slls644g.pdf and from the
- * lan91c96 manual.
+ * timings because the devices can be connected via FPGA.
+ * REVISIT: Add timing support from slls644g.pdf.
*/
- if (of_device_is_compatible(child, "ns16550a") ||
- of_device_is_compatible(child, "smsc,lan91c94") ||
- of_device_is_compatible(child, "smsc,lan91c111")) {
- dev_warn(&pdev->dev,
- "%s using bootloader timings on CS%d\n",
- child->name, cs);
+ if (!gpmc_t.cs_rd_off) {
+ WARN(1, "enable GPMC debug to configure .dts timings for CS%i\n",
+ cs);
+ gpmc_cs_show_timings(cs,
+ "please add GPMC bootloader timings to .dts");
goto no_timings;
}
+ /* CS must be disabled while making changes to gpmc configuration */
+ gpmc_cs_disable_mem(cs);
+
/*
* FIXME: gpmc_cs_request() will map the CS to an arbitary
* location in the gpmc address space. When booting with
@@ -1560,8 +1778,6 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
goto err;
}
- gpmc_read_settings_dt(child, &gpmc_s);
-
ret = of_property_read_u32(child, "bank-width", &gpmc_s.device_width);
if (ret < 0)
goto err;
@@ -1570,8 +1786,20 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
if (ret < 0)
goto err;
- gpmc_read_timings_dt(child, &gpmc_t);
- gpmc_cs_set_timings(cs, &gpmc_t);
+ ret = gpmc_cs_set_timings(cs, &gpmc_t);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set gpmc timings for: %s\n",
+ child->name);
+ goto err;
+ }
+
+ /* Clear limited address i.e. enable A26-A11 */
+ val = gpmc_read_reg(GPMC_CONFIG);
+ val &= ~GPMC_CONFIG_LIMITEDADDRESS;
+ gpmc_write_reg(GPMC_CONFIG, val);
+
+ /* Enable CS region */
+ gpmc_cs_enable_mem(cs);
no_timings:
if (of_platform_device_create(child, NULL, &pdev->dev))
@@ -1668,13 +1896,18 @@ static int gpmc_probe(struct platform_device *pdev)
else
gpmc_irq = res->start;
- gpmc_l3_clk = clk_get(&pdev->dev, "fck");
+ gpmc_l3_clk = devm_clk_get(&pdev->dev, "fck");
if (IS_ERR(gpmc_l3_clk)) {
- dev_err(&pdev->dev, "error: clk_get\n");
+ dev_err(&pdev->dev, "Failed to get GPMC fck\n");
gpmc_irq = 0;
return PTR_ERR(gpmc_l3_clk);
}
+ if (!clk_get_rate(gpmc_l3_clk)) {
+ dev_err(&pdev->dev, "Invalid GPMC fck clock rate\n");
+ return -EINVAL;
+ }
+
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
@@ -1706,9 +1939,6 @@ static int gpmc_probe(struct platform_device *pdev)
if (gpmc_setup_irq() < 0)
dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
- /* Now the GPMC is initialised, unreserve the chip-selects */
- gpmc_cs_map = 0;
-
if (!pdev->dev.of_node) {
gpmc_cs_num = GPMC_CS_NUM;
gpmc_nr_waitpins = GPMC_NR_WAITPINS;
@@ -1717,7 +1947,6 @@ static int gpmc_probe(struct platform_device *pdev)
rc = gpmc_probe_dt(pdev);
if (rc < 0) {
pm_runtime_put_sync(&pdev->dev);
- clk_put(gpmc_l3_clk);
dev_err(gpmc_dev, "failed to probe DT parameters\n");
return rc;
}
@@ -1775,35 +2004,9 @@ static __exit void gpmc_exit(void)
}
-omap_postcore_initcall(gpmc_init);
+postcore_initcall(gpmc_init);
module_exit(gpmc_exit);
-static int __init omap_gpmc_init(void)
-{
- struct omap_hwmod *oh;
- struct platform_device *pdev;
- char *oh_name = "gpmc";
-
- /*
- * if the board boots up with a populated DT, do not
- * manually add the device from this initcall
- */
- if (of_have_populated_dt())
- return -ENODEV;
-
- oh = omap_hwmod_lookup(oh_name);
- if (!oh) {
- pr_err("Could not look up %s\n", oh_name);
- return -ENODEV;
- }
-
- pdev = omap_device_build(DEVICE_NAME, -1, oh, NULL, 0);
- WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
-
- return PTR_RET(pdev);
-}
-omap_postcore_initcall(omap_gpmc_init);
-
static irqreturn_t gpmc_handle_irq(int irq, void *dev)
{
int i;
diff --git a/include/linux/omap-gpmc.h b/include/linux/omap-gpmc.h
new file mode 100644
index 000000000000..c2080eebbb47
--- /dev/null
+++ b/include/linux/omap-gpmc.h
@@ -0,0 +1,199 @@
+/*
+ * OMAP GPMC (General Purpose Memory Controller) defines
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/* Maximum Number of Chip Selects */
+#define GPMC_CS_NUM 8
+
+#define GPMC_CONFIG_WP 0x00000005
+
+#define GPMC_IRQ_FIFOEVENTENABLE 0x01
+#define GPMC_IRQ_COUNT_EVENT 0x02
+
+#define GPMC_BURST_4 4 /* 4 word burst */
+#define GPMC_BURST_8 8 /* 8 word burst */
+#define GPMC_BURST_16 16 /* 16 word burst */
+#define GPMC_DEVWIDTH_8BIT 1 /* 8-bit device width */
+#define GPMC_DEVWIDTH_16BIT 2 /* 16-bit device width */
+#define GPMC_MUX_AAD 1 /* Addr-Addr-Data multiplex */
+#define GPMC_MUX_AD 2 /* Addr-Data multiplex */
+
+/* bool type time settings */
+struct gpmc_bool_timings {
+ bool cycle2cyclediffcsen;
+ bool cycle2cyclesamecsen;
+ bool we_extra_delay;
+ bool oe_extra_delay;
+ bool adv_extra_delay;
+ bool cs_extra_delay;
+ bool time_para_granularity;
+};
+
+/*
+ * Note that all values in this struct are in nanoseconds except sync_clk
+ * (which is in picoseconds), while the register values are in gpmc_fck cycles.
+ */
+struct gpmc_timings {
+ /* Minimum clock period for synchronous mode (in picoseconds) */
+ u32 sync_clk;
+
+ /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
+ u32 cs_on; /* Assertion time */
+ u32 cs_rd_off; /* Read deassertion time */
+ u32 cs_wr_off; /* Write deassertion time */
+
+ /* ADV signal timings corresponding to GPMC_CONFIG3 */
+ u32 adv_on; /* Assertion time */
+ u32 adv_rd_off; /* Read deassertion time */
+ u32 adv_wr_off; /* Write deassertion time */
+
+ /* WE signals timings corresponding to GPMC_CONFIG4 */
+ u32 we_on; /* WE assertion time */
+ u32 we_off; /* WE deassertion time */
+
+ /* OE signals timings corresponding to GPMC_CONFIG4 */
+ u32 oe_on; /* OE assertion time */
+ u32 oe_off; /* OE deassertion time */
+
+ /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
+ u32 page_burst_access; /* Multiple access word delay */
+ u32 access; /* Start-cycle to first data valid delay */
+ u32 rd_cycle; /* Total read cycle time */
+ u32 wr_cycle; /* Total write cycle time */
+
+ u32 bus_turnaround;
+ u32 cycle2cycle_delay;
+
+ u32 wait_monitoring;
+ u32 clk_activation;
+
+ /* The following are only on OMAP3430 */
+ u32 wr_access; /* WRACCESSTIME */
+ u32 wr_data_mux_bus; /* WRDATAONADMUXBUS */
+
+ struct gpmc_bool_timings bool_timings;
+};
+
+/* Device timings in picoseconds */
+struct gpmc_device_timings {
+ u32 t_ceasu; /* address setup to CS valid */
+ u32 t_avdasu; /* address setup to ADV valid */
+ /* XXX: try to combine t_avdp_r & t_avdp_w. Issue is
+ * of tusb using these timings even for sync whilst
+ * ideally for adv_rd/(wr)_off it should have considered
+ * t_avdh instead. This indirectly necessitates r/w
+ * variations of t_avdp as it is possible to have one
+ * sync & other async
+ */
+ u32 t_avdp_r; /* ADV low time (what about t_cer ?) */
+ u32 t_avdp_w;
+ u32 t_aavdh; /* address hold time */
+ u32 t_oeasu; /* address setup to OE valid */
+ u32 t_aa; /* access time from ADV assertion */
+ u32 t_iaa; /* initial access time */
+ u32 t_oe; /* access time from OE assertion */
+ u32 t_ce; /* access time from CS asertion */
+ u32 t_rd_cycle; /* read cycle time */
+ u32 t_cez_r; /* read CS deassertion to high Z */
+ u32 t_cez_w; /* write CS deassertion to high Z */
+ u32 t_oez; /* OE deassertion to high Z */
+ u32 t_weasu; /* address setup to WE valid */
+ u32 t_wpl; /* write assertion time */
+ u32 t_wph; /* write deassertion time */
+ u32 t_wr_cycle; /* write cycle time */
+
+ u32 clk;
+ u32 t_bacc; /* burst access valid clock to output delay */
+ u32 t_ces; /* CS setup time to clk */
+ u32 t_avds; /* ADV setup time to clk */
+ u32 t_avdh; /* ADV hold time from clk */
+ u32 t_ach; /* address hold time from clk */
+ u32 t_rdyo; /* clk to ready valid */
+
+ u32 t_ce_rdyz; /* XXX: description ?, or use t_cez instead */
+ u32 t_ce_avd; /* CS on to ADV on delay */
+
+ /* XXX: check the possibility of combining
+ * cyc_aavhd_oe & cyc_aavdh_we
+ */
+ u8 cyc_aavdh_oe;/* read address hold time in cycles */
+ u8 cyc_aavdh_we;/* write address hold time in cycles */
+ u8 cyc_oe; /* access time from OE assertion in cycles */
+ u8 cyc_wpl; /* write deassertion time in cycles */
+ u32 cyc_iaa; /* initial access time in cycles */
+
+ /* extra delays */
+ bool ce_xdelay;
+ bool avd_xdelay;
+ bool oe_xdelay;
+ bool we_xdelay;
+};
+
+struct gpmc_settings {
+ bool burst_wrap; /* enables wrap bursting */
+ bool burst_read; /* enables read page/burst mode */
+ bool burst_write; /* enables write page/burst mode */
+ bool device_nand; /* device is NAND */
+ bool sync_read; /* enables synchronous reads */
+ bool sync_write; /* enables synchronous writes */
+ bool wait_on_read; /* monitor wait on reads */
+ bool wait_on_write; /* monitor wait on writes */
+ u32 burst_len; /* page/burst length */
+ u32 device_width; /* device bus width (8 or 16 bit) */
+ u32 mux_add_data; /* multiplex address & data */
+ u32 wait_pin; /* wait-pin to be used */
+};
+
+extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
+ struct gpmc_settings *gpmc_s,
+ struct gpmc_device_timings *dev_t);
+
+struct gpmc_nand_regs;
+struct device_node;
+
+extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
+extern int gpmc_get_client_irq(unsigned irq_config);
+
+extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
+
+extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
+extern int gpmc_calc_divider(unsigned int sync_clk);
+extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
+extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p);
+extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
+extern void gpmc_cs_free(int cs);
+extern int gpmc_configure(int cmd, int wval);
+extern void gpmc_read_settings_dt(struct device_node *np,
+ struct gpmc_settings *p);
+
+extern void omap3_gpmc_save_context(void);
+extern void omap3_gpmc_restore_context(void);
+
+struct gpmc_timings;
+struct omap_nand_platform_data;
+struct omap_onenand_platform_data;
+
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
+extern int gpmc_nand_init(struct omap_nand_platform_data *d,
+ struct gpmc_timings *gpmc_t);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d,
+ struct gpmc_timings *gpmc_t)
+{
+ return 0;
+}
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+#else
+#define board_onenand_data NULL
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+#endif