summaryrefslogtreecommitdiff
path: root/Documentation/DocBook/libata.tmpl
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/DocBook/libata.tmpl')
-rw-r--r--Documentation/DocBook/libata.tmpl18
1 files changed, 14 insertions, 4 deletions
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index 265c08c96fcd..8c5411cfeaf0 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -81,16 +81,14 @@ void (*port_disable) (struct ata_port *);
</programlisting>
<para>
- Called from ata_bus_probe() and ata_bus_reset() error paths,
- as well as when unregistering from the SCSI module (rmmod, hot
- unplug).
+ Called from ata_bus_probe() error path, as well as when
+ unregistering from the SCSI module (rmmod, hot unplug).
This function should do whatever needs to be done to take the
port out of use. In most cases, ata_port_disable() can be used
as this hook.
</para>
<para>
Called from ata_bus_probe() on a failed probe.
- Called from ata_bus_reset() on a failed bus reset.
Called from ata_scsi_release().
</para>
@@ -227,6 +225,18 @@ u8 (*sff_check_altstatus)(struct ata_port *ap);
</sect2>
+ <sect2><title>Write specific ATA shadow register</title>
+ <programlisting>
+void (*sff_set_devctl)(struct ata_port *ap, u8 ctl);
+ </programlisting>
+
+ <para>
+ Write the device control ATA shadow register to the hardware.
+ Most drivers don't need to define this.
+ </para>
+
+ </sect2>
+
<sect2><title>Select ATA device on bus</title>
<programlisting>
void (*sff_dev_select)(struct ata_port *ap, unsigned int device);