diff options
Diffstat (limited to 'Documentation/admin-guide/kernel-parameters.txt')
-rw-r--r-- | Documentation/admin-guide/kernel-parameters.txt | 164 |
1 files changed, 122 insertions, 42 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 722b6eca2e93..b2b128034225 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -418,20 +418,20 @@ arm64.nobti [ARM64] Unconditionally disable Branch Target Identification support - arm64.nopauth [ARM64] Unconditionally disable Pointer Authentication - support + arm64.nomops [ARM64] Unconditionally disable Memory Copy and Memory + Set instructions support arm64.nomte [ARM64] Unconditionally disable Memory Tagging Extension support - arm64.nosve [ARM64] Unconditionally disable Scalable Vector - Extension support + arm64.nopauth [ARM64] Unconditionally disable Pointer Authentication + support arm64.nosme [ARM64] Unconditionally disable Scalable Matrix Extension support - arm64.nomops [ARM64] Unconditionally disable Memory Copy and Memory - Set instructions support + arm64.nosve [ARM64] Unconditionally disable Scalable Vector + Extension support ataflop= [HW,M68k] @@ -553,7 +553,7 @@ others). ccw_timeout_log [S390] - See Documentation/s390/common_io.rst for details. + See Documentation/arch/s390/common_io.rst for details. cgroup_disable= [KNL] Disable a particular controller or optional feature Format: {name of the controller(s) or feature(s) to disable} @@ -598,7 +598,7 @@ Setting checkreqprot to 1 is deprecated. cio_ignore= [S390] - See Documentation/s390/common_io.rst for details. + See Documentation/arch/s390/common_io.rst for details. clearcpuid=X[,X...] [X86] Disable CPUID feature X for the kernel. See @@ -696,7 +696,7 @@ kernel/dma/contiguous.c cma_pernuma=nn[MG] - [ARM64,KNL,CMA] + [KNL,CMA] Sets the size of kernel per-numa memory area for contiguous memory allocations. A value of 0 disables per-numa CMA altogether. And If this option is not @@ -706,6 +706,17 @@ which is located in node nid, if the allocation fails, they will fallback to the global default memory area. + numa_cma=<node>:nn[MG][,<node>:nn[MG]] + [KNL,CMA] + Sets the size of kernel numa memory area for + contiguous memory allocations. It will reserve CMA + area for the specified node. + + With numa CMA enabled, DMA users on node nid will + first try to allocate buffer from the numa area + which is located in node nid, if the allocation fails, + they will fallback to the global default memory area. + cmo_free_hint= [PPC] Format: { yes | no } Specify whether pages are marked as being inactive when they are freed. This is used in CMO environments @@ -862,7 +873,7 @@ memory region [offset, offset + size] for that kernel image. If '@offset' is omitted, then a suitable offset is selected automatically. - [KNL, X86-64, ARM64] Select a region under 4G first, and + [KNL, X86-64, ARM64, RISCV] Select a region under 4G first, and fall back to reserve region above 4G when '@offset' hasn't been specified. See Documentation/admin-guide/kdump/kdump.rst for further details. @@ -875,14 +886,14 @@ Documentation/admin-guide/kdump/kdump.rst for an example. crashkernel=size[KMG],high - [KNL, X86-64, ARM64] range could be above 4G. Allow kernel - to allocate physical memory region from top, so could - be above 4G if system have more than 4G ram installed. - Otherwise memory region will be allocated below 4G, if - available. + [KNL, X86-64, ARM64, RISCV] range could be above 4G. + Allow kernel to allocate physical memory region from top, + so could be above 4G if system have more than 4G ram + installed. Otherwise memory region will be allocated + below 4G, if available. It will be ignored if crashkernel=X is specified. crashkernel=size[KMG],low - [KNL, X86-64, ARM64] range under 4G. When crashkernel=X,high + [KNL, X86-64, ARM64, RISCV] range under 4G. When crashkernel=X,high is passed, kernel could allocate physical memory region above 4G, that cause second kernel crash on system that require some amount of low memory, e.g. swiotlb @@ -893,6 +904,7 @@ size is platform dependent. --> x86: max(swiotlb_size_or_default() + 8MiB, 256MiB) --> arm64: 128MiB + --> riscv: 128MiB This one lets the user specify own low range under 4G for second kernel instead. 0: to disable low allocation. @@ -2644,7 +2656,7 @@ kvm-intel.flexpriority= [KVM,Intel] Control KVM's use of FlexPriority feature - (TPR shadow). Default is 1 (enabled). Disalbe by KVM if + (TPR shadow). Default is 1 (enabled). Disable by KVM if hardware lacks support for it. kvm-intel.nested= @@ -2938,6 +2950,10 @@ locktorture.torture_type= [KNL] Specify the locking implementation to test. + locktorture.writer_fifo= [KNL] + Run the write-side locktorture kthreads at + sched_set_fifo() real-time priority. + locktorture.verbose= [KNL] Enable additional printk() statements. @@ -3125,7 +3141,7 @@ [KNL,SH] Allow user to override the default size for per-device physically contiguous DMA buffers. - memhp_default_state=online/offline + memhp_default_state=online/offline/online_kernel/online_movable [KNL] Set the initial state for the memory hotplug onlining policy. If not specified, the default value is set according to the @@ -3738,7 +3754,7 @@ nohibernate [HIBERNATION] Disable hibernation and resume. - nohlt [ARM,ARM64,MICROBLAZE,MIPS,SH] Forces the kernel to + nohlt [ARM,ARM64,MICROBLAZE,MIPS,PPC,SH] Forces the kernel to busy wait in do_idle() and not use the arch_cpu_idle() implementation; requires CONFIG_GENERIC_IDLE_POLL_SETUP to be effective. This is useful on platforms where the @@ -3874,10 +3890,10 @@ nosmp [SMP] Tells an SMP kernel to act as a UP kernel, and disable the IO APIC. legacy for "maxcpus=0". - nosmt [KNL,MIPS,S390] Disable symmetric multithreading (SMT). + nosmt [KNL,MIPS,PPC,S390] Disable symmetric multithreading (SMT). Equivalent to smt=1. - [KNL,X86] Disable symmetric multithreading (SMT). + [KNL,X86,PPC] Disable symmetric multithreading (SMT). nosmt=force: Force disable SMT, cannot be undone via the sysfs control file. @@ -4058,20 +4074,6 @@ timeout < 0: reboot immediately Format: <timeout> - panic_print= Bitmask for printing system info when panic happens. - User can chose combination of the following bits: - bit 0: print all tasks info - bit 1: print system memory info - bit 2: print timer info - bit 3: print locks info if CONFIG_LOCKDEP is on - bit 4: print ftrace buffer - bit 5: print all printk messages in buffer - bit 6: print all CPUs backtrace (if available in the arch) - *Be aware* that this option may print a _lot_ of lines, - so there are risks of losing older messages in the log. - Use this option carefully, maybe worth to setup a - bigger log buffer with "log_buf_len" along with this. - panic_on_taint= Bitmask for conditionally calling panic() in add_taint() Format: <hex>[,nousertaint] Hexadecimal bitmask representing the set of TAINT flags @@ -4088,6 +4090,20 @@ panic_on_warn=1 panic() instead of WARN(). Useful to cause kdump on a WARN(). + panic_print= Bitmask for printing system info when panic happens. + User can chose combination of the following bits: + bit 0: print all tasks info + bit 1: print system memory info + bit 2: print timer info + bit 3: print locks info if CONFIG_LOCKDEP is on + bit 4: print ftrace buffer + bit 5: print all printk messages in buffer + bit 6: print all CPUs backtrace (if available in the arch) + *Be aware* that this option may print a _lot_ of lines, + so there are risks of losing older messages in the log. + Use this option carefully, maybe worth to setup a + bigger log buffer with "log_buf_len" along with this. + parkbd.port= [HW] Parallel port number the keyboard adapter is connected to, default is 0. Format: <parport#> @@ -4207,7 +4223,7 @@ mode 0, bit 1 is for mode 1, and so on. Mode 0 only allowed by default. - pause_on_oops= + pause_on_oops=<int> Halt all CPUs after the first oops has been printed for the specified number of seconds. This is to be used if your oopses keep scrolling off the screen. @@ -4949,6 +4965,15 @@ test until boot completes in order to avoid interference. + rcuscale.kfree_by_call_rcu= [KNL] + In kernels built with CONFIG_RCU_LAZY=y, test + call_rcu() instead of kfree_rcu(). + + rcuscale.kfree_mult= [KNL] + Instead of allocating an object of size kfree_obj, + allocate one of kfree_mult * sizeof(kfree_obj). + Defaults to 1. + rcuscale.kfree_rcu_test= [KNL] Set to measure performance of kfree_rcu() flooding. @@ -4974,6 +4999,12 @@ Number of loops doing rcuscale.kfree_alloc_num number of allocations and frees. + rcuscale.minruntime= [KNL] + Set the minimum test run time in seconds. This + does not affect the data-collection interval, + but instead allows better measurement of things + like CPU consumption. + rcuscale.nreaders= [KNL] Set number of RCU readers. The value -1 selects N, where N is the number of CPUs. A value @@ -4988,7 +5019,7 @@ the same as for rcuscale.nreaders. N, where N is the number of CPUs - rcuscale.perf_type= [KNL] + rcuscale.scale_type= [KNL] Specify the RCU implementation to test. rcuscale.shutdown= [KNL] @@ -5004,6 +5035,11 @@ in microseconds. The default of zero says no holdoff. + rcuscale.writer_holdoff_jiffies= [KNL] + Additional write-side holdoff between grace + periods, but in jiffies. The default of zero + says no holdoff. + rcutorture.fqs_duration= [KNL] Set duration of force_quiescent_state bursts in microseconds. @@ -5285,6 +5321,13 @@ number avoids disturbing real-time workloads, but lengthens grace periods. + rcupdate.rcu_task_lazy_lim= [KNL] + Number of callbacks on a given CPU that will + cancel laziness on that CPU. Use -1 to disable + cancellation of laziness, but be advised that + doing so increases the danger of OOM due to + callback flooding. + rcupdate.rcu_task_stall_info= [KNL] Set initial timeout in jiffies for RCU task stall informational messages, which give some indication @@ -5314,6 +5357,29 @@ A change in value does not take effect until the beginning of the next grace period. + rcupdate.rcu_tasks_lazy_ms= [KNL] + Set timeout in milliseconds RCU Tasks asynchronous + callback batching for call_rcu_tasks(). + A negative value will take the default. A value + of zero will disable batching. Batching is + always disabled for synchronize_rcu_tasks(). + + rcupdate.rcu_tasks_rude_lazy_ms= [KNL] + Set timeout in milliseconds RCU Tasks + Rude asynchronous callback batching for + call_rcu_tasks_rude(). A negative value + will take the default. A value of zero will + disable batching. Batching is always disabled + for synchronize_rcu_tasks_rude(). + + rcupdate.rcu_tasks_trace_lazy_ms= [KNL] + Set timeout in milliseconds RCU Tasks + Trace asynchronous callback batching for + call_rcu_tasks_trace(). A negative value + will take the default. A value of zero will + disable batching. Batching is always disabled + for synchronize_rcu_tasks_trace(). + rcupdate.rcu_self_test= [KNL] Run the RCU early boot self tests @@ -5489,6 +5555,13 @@ [KNL] Disable ring 3 MONITOR/MWAIT feature on supported CPUs. + riscv_isa_fallback [RISCV] + When CONFIG_RISCV_ISA_FALLBACK is not enabled, permit + falling back to detecting extension support by parsing + "riscv,isa" property on devicetree systems when the + replacement properties are not found. See the Kconfig + entry for RISCV_ISA_FALLBACK. + ro [KNL] Mount root device read-only on boot rodata= [KNL] @@ -5522,6 +5595,10 @@ Useful for devices that are detected asynchronously (e.g. USB and MMC devices). + rootwait= [KNL] Maximum time (in seconds) to wait for root device + to show up before attempting to mount the root + filesystem. + rproc_mem=nn[KMG][@address] [KNL,ARM,CMA] Remoteproc physical memory block. Memory area to be used by remote processor image, @@ -6275,10 +6352,6 @@ -1: disable all critical trip points in all thermal zones <degrees C>: override all critical trip points - thermal.nocrt= [HW,ACPI] - Set to disable actions on ACPI thermal zone - critical and hot trip points. - thermal.off= [HW,ACPI] 1: disable ACPI thermal control @@ -6340,6 +6413,13 @@ This will guarantee that all the other pcrs are saved. + tpm_tis.interrupts= [HW,TPM] + Enable interrupts for the MMIO based physical layer + for the FIFO interface. By default it is set to false + (0). For more information about TPM hardware interfaces + defined by Trusted Computing Group (TCG) see + https://trustedcomputinggroup.org/resource/pc-client-platform-tpm-profile-ptp-specification/ + tp_printk [FTRACE] Have the tracepoints sent to printk as well as the tracing ring buffer. This is useful for early boot up @@ -6639,7 +6719,7 @@ usbcore.authorized_default= [USB] Default USB device authorization: - (default -1 = authorized except for wireless USB, + (default -1 = authorized (same as 1), 0 = not authorized, 1 = authorized, 2 = authorized if device connected to internal port) |