summaryrefslogtreecommitdiff
path: root/Documentation/admin-guide/kernel-parameters.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/admin-guide/kernel-parameters.txt')
-rw-r--r--Documentation/admin-guide/kernel-parameters.txt36
1 files changed, 18 insertions, 18 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 98ea67f27809..bdc1f33fd3d1 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -724,7 +724,7 @@
memory region [offset, offset + size] for that kernel
image. If '@offset' is omitted, then a suitable offset
is selected automatically.
- [KNL, x86_64] select a region under 4G first, and
+ [KNL, X86-64] Select a region under 4G first, and
fall back to reserve region above 4G when '@offset'
hasn't been specified.
See Documentation/admin-guide/kdump/kdump.rst for further details.
@@ -737,14 +737,14 @@
Documentation/admin-guide/kdump/kdump.rst for an example.
crashkernel=size[KMG],high
- [KNL, x86_64] range could be above 4G. Allow kernel
+ [KNL, X86-64] range could be above 4G. Allow kernel
to allocate physical memory region from top, so could
be above 4G if system have more than 4G ram installed.
Otherwise memory region will be allocated below 4G, if
available.
It will be ignored if crashkernel=X is specified.
crashkernel=size[KMG],low
- [KNL, x86_64] range under 4G. When crashkernel=X,high
+ [KNL, X86-64] range under 4G. When crashkernel=X,high
is passed, kernel could allocate physical memory region
above 4G, that cause second kernel crash on system
that require some amount of low memory, e.g. swiotlb
@@ -1427,7 +1427,7 @@
gamma= [HW,DRM]
- gart_fix_e820= [X86_64] disable the fix e820 for K8 GART
+ gart_fix_e820= [X86-64] disable the fix e820 for K8 GART
Format: off | on
default: on
@@ -1814,7 +1814,7 @@
Format: 0 | 1
Default set by CONFIG_INIT_ON_FREE_DEFAULT_ON.
- init_pkru= [x86] Specify the default memory protection keys rights
+ init_pkru= [X86] Specify the default memory protection keys rights
register contents for all processes. 0x55555554 by
default (disallow access to all but pkey 0). Can
override in debugfs after boot.
@@ -1822,7 +1822,7 @@
inport.irq= [HW] Inport (ATI XL and Microsoft) busmouse driver
Format: <irq>
- int_pln_enable [x86] Enable power limit notification interrupt
+ int_pln_enable [X86] Enable power limit notification interrupt
integrity_audit=[IMA]
Format: { "0" | "1" }
@@ -1840,7 +1840,7 @@
bypassed by not enabling DMAR with this option. In
this case, gfx device will use physical address for
DMA.
- forcedac [x86_64]
+ forcedac [X86-64]
With this option iommu will not optimize to look
for io virtual address below 32-bit forcing dual
address cycle on pci bus for cards supporting greater
@@ -1925,7 +1925,7 @@
strict regions from userspace.
relaxed
- iommu= [x86]
+ iommu= [X86]
off
force
noforce
@@ -1935,8 +1935,8 @@
merge
nomerge
soft
- pt [x86]
- nopt [x86]
+ pt [X86]
+ nopt [X86]
nobypass [PPC/POWERNV]
Disable IOMMU bypass, using IOMMU for PCI devices.
@@ -2079,21 +2079,21 @@
iucv= [HW,NET]
- ivrs_ioapic [HW,X86_64]
+ ivrs_ioapic [HW,X86-64]
Provide an override to the IOAPIC-ID<->DEVICE-ID
mapping provided in the IVRS ACPI table. For
example, to map IOAPIC-ID decimal 10 to
PCI device 00:14.0 write the parameter as:
ivrs_ioapic[10]=00:14.0
- ivrs_hpet [HW,X86_64]
+ ivrs_hpet [HW,X86-64]
Provide an override to the HPET-ID<->DEVICE-ID
mapping provided in the IVRS ACPI table. For
example, to map HPET-ID decimal 0 to
PCI device 00:14.0 write the parameter as:
ivrs_hpet[0]=00:14.0
- ivrs_acpihid [HW,X86_64]
+ ivrs_acpihid [HW,X86-64]
Provide an override to the ACPI-HID:UID<->DEVICE-ID
mapping provided in the IVRS ACPI table. For
example, to map UART-HID:UID AMD0020:0 to
@@ -2370,7 +2370,7 @@
lapic [X86-32,APIC] Enable the local APIC even if BIOS
disabled it.
- lapic= [x86,APIC] "notscdeadline" Do not use TSC deadline
+ lapic= [X86,APIC] "notscdeadline" Do not use TSC deadline
value for LAPIC timer one-shot implementation. Default
back to the programmable timer unit in the LAPIC.
@@ -3188,12 +3188,12 @@
register save and restore. The kernel will only save
legacy floating-point registers on task switch.
- nohugeiomap [KNL,x86,PPC] Disable kernel huge I/O mappings.
+ nohugeiomap [KNL,X86,PPC] Disable kernel huge I/O mappings.
nosmt [KNL,S390] Disable symmetric multithreading (SMT).
Equivalent to smt=1.
- [KNL,x86] Disable symmetric multithreading (SMT).
+ [KNL,X86] Disable symmetric multithreading (SMT).
nosmt=force: Force disable SMT, cannot be undone
via the sysfs control file.
@@ -3955,7 +3955,7 @@
pt. [PARIDE]
See Documentation/admin-guide/blockdev/paride.rst.
- pti= [X86_64] Control Page Table Isolation of user and
+ pti= [X86-64] Control Page Table Isolation of user and
kernel address spaces. Disabling this feature
removes hardening, but improves performance of
system calls and interrupts.
@@ -3967,7 +3967,7 @@
Not specifying this option is equivalent to pti=auto.
- nopti [X86_64]
+ nopti [X86-64]
Equivalent to pti=off
pty.legacy_count=