diff options
Diffstat (limited to 'Documentation/devicetree/bindings/auxdisplay')
6 files changed, 165 insertions, 64 deletions
diff --git a/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml index 5d02bd032a85..439f7b811a94 100644 --- a/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml +++ b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml @@ -39,6 +39,6 @@ additionalProperties: false examples: - | lcd@10008000 { - compatible = "arm,versatile-lcd"; - reg = <0x10008000 0x1000>; + compatible = "arm,versatile-lcd"; + reg = <0x10008000 0x1000>; }; diff --git a/Documentation/devicetree/bindings/auxdisplay/gpio-7-segment.yaml b/Documentation/devicetree/bindings/auxdisplay/gpio-7-segment.yaml new file mode 100644 index 000000000000..328954893c64 --- /dev/null +++ b/Documentation/devicetree/bindings/auxdisplay/gpio-7-segment.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/auxdisplay/gpio-7-segment.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO based LED segment display + +maintainers: + - Chris Packham <chris.packham@alliedtelesis.co.nz> + +properties: + compatible: + const: gpio-7-segment + + segment-gpios: + description: | + An array of GPIOs one per segment. The first GPIO corresponds to the A + segment, the seventh GPIO corresponds to the G segment. Some LED blocks + also have a decimal point which can be specified as an optional eighth + segment. + + -a- + | | + f b + | | + -g- + | | + e c + | | + -d- dp + + minItems: 7 + maxItems: 8 + +required: + - segment-gpios + +additionalProperties: false + +examples: + - | + + #include <dt-bindings/gpio/gpio.h> + + led-7seg { + compatible = "gpio-7-segment"; + segment-gpios = <&gpio 0 GPIO_ACTIVE_LOW>, + <&gpio 1 GPIO_ACTIVE_LOW>, + <&gpio 2 GPIO_ACTIVE_LOW>, + <&gpio 3 GPIO_ACTIVE_LOW>, + <&gpio 4 GPIO_ACTIVE_LOW>, + <&gpio 5 GPIO_ACTIVE_LOW>, + <&gpio 6 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml index 406a922a714e..3ca0e9863d83 100644 --- a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml +++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml @@ -84,42 +84,44 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - auxdisplay { - compatible = "hit,hd44780"; - - data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>, - <&hc595 1 GPIO_ACTIVE_HIGH>, - <&hc595 2 GPIO_ACTIVE_HIGH>, - <&hc595 3 GPIO_ACTIVE_HIGH>; - enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; - rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; - - display-height-chars = <2>; - display-width-chars = <16>; + display-controller { + compatible = "hit,hd44780"; + + data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>, + <&hc595 1 GPIO_ACTIVE_HIGH>, + <&hc595 2 GPIO_ACTIVE_HIGH>, + <&hc595 3 GPIO_ACTIVE_HIGH>; + enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + + display-height-chars = <2>; + display-width-chars = <16>; }; + - | #include <dt-bindings/gpio/gpio.h> i2c { - #address-cells = <1>; - #size-cells = <0>; - - pcf8574: pcf8574@27 { - compatible = "nxp,pcf8574"; - reg = <0x27>; - gpio-controller; - #gpio-cells = <2>; - }; + #address-cells = <1>; + #size-cells = <0>; + + pcf8574: gpio-expander@27 { + compatible = "nxp,pcf8574"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; }; - hd44780 { - compatible = "hit,hd44780"; - display-height-chars = <2>; - display-width-chars = <16>; - data-gpios = <&pcf8574 4 0>, - <&pcf8574 5 0>, - <&pcf8574 6 0>, - <&pcf8574 7 0>; - enable-gpios = <&pcf8574 2 0>; - rs-gpios = <&pcf8574 0 0>; - rw-gpios = <&pcf8574 1 0>; - backlight-gpios = <&pcf8574 3 0>; + + display-controller { + compatible = "hit,hd44780"; + display-height-chars = <2>; + display-width-chars = <16>; + data-gpios = <&pcf8574 4 GPIO_ACTIVE_HIGH>, + <&pcf8574 5 GPIO_ACTIVE_HIGH>, + <&pcf8574 6 GPIO_ACTIVE_HIGH>, + <&pcf8574 7 GPIO_ACTIVE_HIGH>; + enable-gpios = <&pcf8574 2 GPIO_ACTIVE_HIGH>; + rs-gpios = <&pcf8574 0 GPIO_ACTIVE_HIGH>; + rw-gpios = <&pcf8574 1 GPIO_ACTIVE_HIGH>; + backlight-gpios = <&pcf8574 3 GPIO_ACTIVE_HIGH>; }; diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml index be95f6b97b41..b90eec2077b4 100644 --- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml +++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml @@ -74,31 +74,31 @@ examples: #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> i2c { - #address-cells = <1>; - #size-cells = <0>; - - ht16k33: ht16k33@70 { - compatible = "holtek,ht16k33"; - reg = <0x70>; - refresh-rate-hz = <20>; - interrupt-parent = <&gpio4>; - interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; - debounce-delay-ms = <50>; - linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>, - <MATRIX_KEY(3, 0, KEY_F8)>, - <MATRIX_KEY(4, 0, KEY_F10)>, - <MATRIX_KEY(5, 0, KEY_F4)>, - <MATRIX_KEY(6, 0, KEY_F2)>, - <MATRIX_KEY(2, 1, KEY_F5)>, - <MATRIX_KEY(3, 1, KEY_F7)>, - <MATRIX_KEY(4, 1, KEY_F9)>, - <MATRIX_KEY(5, 1, KEY_F3)>, - <MATRIX_KEY(6, 1, KEY_F1)>; - - led { - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_BACKLIGHT; - linux,default-trigger = "backlight"; - }; + #address-cells = <1>; + #size-cells = <0>; + + display-controller@70 { + compatible = "holtek,ht16k33"; + reg = <0x70>; + refresh-rate-hz = <20>; + interrupt-parent = <&gpio4>; + interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; + debounce-delay-ms = <50>; + linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>, + <MATRIX_KEY(3, 0, KEY_F8)>, + <MATRIX_KEY(4, 0, KEY_F10)>, + <MATRIX_KEY(5, 0, KEY_F4)>, + <MATRIX_KEY(6, 0, KEY_F2)>, + <MATRIX_KEY(2, 1, KEY_F5)>, + <MATRIX_KEY(3, 1, KEY_F7)>, + <MATRIX_KEY(4, 1, KEY_F9)>, + <MATRIX_KEY(5, 1, KEY_F3)>, + <MATRIX_KEY(6, 1, KEY_F1)>; + + led { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_BACKLIGHT; + linux,default-trigger = "backlight"; }; - }; + }; + }; diff --git a/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml index 1899b23de7d1..55e9831b3f67 100644 --- a/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml +++ b/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml @@ -50,6 +50,6 @@ additionalProperties: false examples: - | lcd: lcd@17fff000 { - compatible = "img,boston-lcd"; - reg = <0x17fff000 0x8>; + compatible = "img,boston-lcd"; + reg = <0x17fff000 0x8>; }; diff --git a/Documentation/devicetree/bindings/auxdisplay/maxim,max6959.yaml b/Documentation/devicetree/bindings/auxdisplay/maxim,max6959.yaml new file mode 100644 index 000000000000..20dd9e8c8190 --- /dev/null +++ b/Documentation/devicetree/bindings/auxdisplay/maxim,max6959.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/auxdisplay/maxim,max6959.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX6958/6959 7-segment LED display controller + +maintainers: + - Andy Shevchenko <andriy.shevchenko@linux.intel.com> + +description: + The Maxim MAX6958/6959 7-segment LED display controller provides + an I2C interface to up to four 7-segment LED digits. The MAX6959, + in comparison to MAX6958, adds input support. Type of the chip can + be autodetected via specific register read, and hence the features + may be enabled in the driver at run-time, in case they are requested + via Device Tree. A given hardware is simple and does not provide + any additional pins, such as reset or power enable. + +properties: + compatible: + const: maxim,max6959 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + display-controller@38 { + compatible = "maxim,max6959"; + reg = <0x38>; + }; + }; |