diff options
Diffstat (limited to 'Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt')
-rw-r--r-- | Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt | 53 |
1 files changed, 0 insertions, 53 deletions
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt deleted file mode 100644 index 7ccecd5c02c1..000000000000 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt +++ /dev/null @@ -1,53 +0,0 @@ -* Amlogic GXBB Clock and Reset Unit - -The Amlogic GXBB clock controller generates and supplies clock to various -controllers within the SoC. - -Required Properties: - -- compatible: should be: - "amlogic,gxbb-clkc" for GXBB SoC, - "amlogic,gxl-clkc" for GXL and GXM SoC, - "amlogic,axg-clkc" for AXG SoC. - "amlogic,g12a-clkc" for G12A SoC. - "amlogic,g12b-clkc" for G12B SoC. - "amlogic,sm1-clkc" for SM1 SoC. -- clocks : list of clock phandle, one for each entry clock-names. -- clock-names : should contain the following: - * "xtal": the platform xtal - -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/gxbb-clkc.h header and can be -used in device tree sources. - -Parent node should have the following properties : -- compatible: "syscon", "simple-mfd, and "amlogic,meson-gx-hhi-sysctrl" or - "amlogic,meson-axg-hhi-sysctrl" -- reg: base address and size of the HHI system control register space. - -Example: Clock controller node: - -sysctrl: system-controller@0 { - compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd"; - reg = <0 0 0 0x400>; - - clkc: clock-controller { - #clock-cells = <1>; - compatible = "amlogic,gxbb-clkc"; - clocks = <&xtal>; - clock-names = "xtal"; - }; -}; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart_AO: serial@c81004c0 { - compatible = "amlogic,meson-uart"; - reg = <0xc81004c0 0x14>; - interrupts = <0 90 1>; - clocks = <&clkc CLKID_CLK81>; - }; |