diff options
Diffstat (limited to 'Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt')
-rw-r--r-- | Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt | 59 |
1 files changed, 0 insertions, 59 deletions
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt deleted file mode 100644 index 161326a4f9c1..000000000000 --- a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt +++ /dev/null @@ -1,59 +0,0 @@ -* Rockchip RV1108 Clock and Reset Unit - -The RV1108 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rv1108-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "ext_vip" - external VIP clock - optional - - "ext_i2s" - external I2S clock - optional - - "ext_gmac" - external GMAC clock - optional - - "hdmiphy" - external clock input derived from HDMI PHY - optional - - "usbphy" - external clock input derived from USB PHY - optional - -Example: Clock controller node: - - cru: cru@20200000 { - compatible = "rockchip,rv1108-cru"; - reg = <0x20200000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@10230000 { - compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart"; - reg = <0x10230000 0x100>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&cru SCLK_UART0>; - }; |