diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt')
-rw-r--r-- | Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt | 94 |
1 files changed, 0 insertions, 94 deletions
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt deleted file mode 100644 index 9a223df8530c..000000000000 --- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt +++ /dev/null @@ -1,94 +0,0 @@ -Rockchip specific extensions to the Synopsys Designware MIPI DSI -================================ - -Required properties: -- #address-cells: Should be <1>. -- #size-cells: Should be <0>. -- compatible: one of - "rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi" - "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi" - "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi" - "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi" -- reg: Represent the physical address range of the controller. -- interrupts: Represent the controller's interrupt to the CPU(s). -- clocks, clock-names: Phandles to the controller's pll reference - clock(ref) when using an internal dphy and APB clock(pclk). - For RK3399, a phy config clock (phy_cfg) and a grf clock(grf) - are required. As described in [1]. -- rockchip,grf: this soc should set GRF regs to mux vopl/vopb. -- ports: contain a port node with endpoint definitions as defined in [2]. - For vopb,set the reg = <0> and set the reg = <1> for vopl. -- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl -- video port 1 for either a panel or subsequent encoder - -Optional properties: -- phys: from general PHY binding: the phandle for the PHY device. -- phy-names: Should be "dphy" if phys references an external phy. -- #phy-cells: Defined when used as ISP phy, should be 0. -- power-domains: a phandle to mipi dsi power domain node. -- resets: list of phandle + reset specifier pairs, as described in [3]. -- reset-names: string reset name, must be "apb". - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/media/video-interfaces.txt -[3] Documentation/devicetree/bindings/reset/reset.txt - -Example: - mipi_dsi: mipi@ff960000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"; - reg = <0xff960000 0x4000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>; - clock-names = "ref", "pclk"; - resets = <&cru SRST_MIPIDSI0>; - reset-names = "apb"; - rockchip,grf = <&grf>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - mipi_in: port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - mipi_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_mipi>; - }; - mipi_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_mipi>; - }; - }; - - mipi_out: port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - mipi_out_panel: endpoint { - remote-endpoint = <&panel_in_mipi>; - }; - }; - }; - - panel { - compatible ="boe,tv080wum-nl0"; - reg = <0>; - - enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_en>; - backlight = <&backlight>; - - port { - panel_in_mipi: endpoint { - remote-endpoint = <&mipi_out_panel>; - }; - }; - }; - }; |