summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml')
-rw-r--r--Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml22
1 files changed, 22 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
index 6f0443322a36..47af97bb4ced 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
@@ -26,6 +26,7 @@ properties:
- ti,ina226
- ti,ina230
- ti,ina231
+ - ti,ina238
reg:
maxItems: 1
@@ -35,6 +36,27 @@ properties:
Shunt resistor value in micro-Ohm.
$ref: /schemas/types.yaml#/definitions/uint32
+ ti,shunt-gain:
+ description: |
+ Programmable gain divisor for the shunt voltage accuracy and range. This
+ property only applies to devices that have configurable PGA/ADCRANGE. The
+ gain value is used configure the gain and to convert the shunt voltage,
+ current and power register values when reading measurements from the
+ device.
+
+ For devices that have a configurable PGA (e.g. INA209, INA219, INA220),
+ the gain value maps directly with the PG bits of the config register.
+
+ For devices that have ADCRANGE configuration (e.g. INA238) a shunt-gain
+ value of 1 maps to ADCRANGE=1 where no gain divisor is applied to the
+ shunt voltage, and a value of 4 maps to ADCRANGE=0 such that a wider
+ voltage range is used.
+
+ The default value is device dependent, and is defined by the reset value
+ of PGA/ADCRANGE in the respective configuration registers.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 4, 8]
+
required:
- compatible
- reg