2 files changed, 39 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/mtd/ibm,ndfc.txt b/Documentation/devicetree/bindings/mtd/ibm,ndfc.txt
new file mode 100644
index 000000000000..869f0b5f16e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ibm,ndfc.txt
@@ -0,0 +1,39 @@
+AMCC NDFC (NanD Flash Controller)
+
+Required properties:
+- compatible : "ibm,ndfc".
+- reg : should specify chip select and size used for the chip (0x2000).
+
+Optional properties:
+- ccr : NDFC config and control register value (default 0).
+- bank-settings : NDFC bank configuration register value (default 0).
+
+Notes:
+- partition(s) - follows the OF MTD standard for partitions
+
+Example:
+
+ndfc@1,0 {
+	compatible = "ibm,ndfc";
+	reg = <0x00000001 0x00000000 0x00002000>;
+	ccr = <0x00001000>;
+	bank-settings = <0x80002222>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	nand {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "kernel";
+			reg = <0x00000000 0x00200000>;
+		};
+		partition@200000 {
+			label = "root";
+			reg = <0x00200000 0x03E00000>;
+		};
+	};
+};
+
+
diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
index 1c88526dedfc..c5ba6a4ba1f2 100644
--- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
@@ -20,7 +20,6 @@ Required NFI properties:
 - interrupts:			Interrupts of NFI.
 - clocks:			NFI required clocks.
 - clock-names:			NFI clocks internal name.
-- status:			Disabled default. Then set "okay" by platform.
 - ecc-engine:			Required ECC Engine node.
 - #address-cells:		NAND chip index, should be 1.
 - #size-cells:			Should be 0.
@@ -34,7 +33,6 @@ Example:
 		clocks = <&pericfg CLK_PERI_NFI>,
 			 <&pericfg CLK_PERI_NFI_PAD>;
 		clock-names = "nfi_clk", "pad_clk";
-		status = "disabled";
 		ecc-engine = <&bch>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -152,7 +150,6 @@ Required BCH properties:
 - interrupts:	Interrupts of ECC.
 - clocks:	ECC required clocks.
 - clock-names:	ECC clocks internal name.
-- status:	Disabled default. Then set "okay" by platform.
 
 Example:
 
@@ -162,5 +159,4 @@ Example:
 		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&pericfg CLK_PERI_NFI_ECC>;
 		clock-names = "nfiecc_clk";
-		status = "disabled";
 	};