diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/sff,sfp.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/net/sff,sfp.yaml | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml index bf6cbc7c2ba3..90611b598d2b 100644 --- a/Documentation/devicetree/bindings/net/sff,sfp.yaml +++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml @@ -29,39 +29,39 @@ properties: allowable by a module in the slot, in milli-Watts. Presently, modules can be up to 1W, 1.5W or 2W. - "mod-def0-gpios": + mod-def0-gpios: maxItems: 1 description: GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS) module presence input gpio signal, active (module absent) high. Must not be present for SFF modules - "los-gpios": + los-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Receiver Loss of Signal Indication input gpio signal, active (signal lost) high - "tx-fault-gpios": + tx-fault-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Module Transmitter Fault input gpio signal, active (fault condition) high - "tx-disable-gpios": + tx-disable-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Transmitter Disable output gpio signal, active (Tx disable) high - "rate-select0-gpios": + rate-select0-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Rx Signaling Rate Select (AKA RS0) output gpio signal, low - low Rx rate, high - high Rx rate Must not be present for SFF modules - "rate-select1-gpios": + rate-select1-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Tx Signaling Rate Select (AKA RS1) |