diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl')
62 files changed, 837 insertions, 775 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml index 45a307d3ce16..c11495524dd2 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml @@ -31,6 +31,7 @@ properties: - ti,omap3-padconf - ti,omap4-padconf - ti,omap5-padconf + - ti,j7200-padconf - const: pinctrl-single reg: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml index fad0118fd521..23300606547c 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml @@ -23,13 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 24 @@ -95,7 +88,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml index 3d3086ae1ba6..e571cd64418f 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml @@ -26,13 +26,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 27 @@ -100,7 +93,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml index 7c3e5e043f07..ed00fbaec11b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml @@ -22,12 +22,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - patternProperties: "-state$": oneOf: @@ -100,7 +94,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml index e053fbd588b5..6f90dbbdbdcc 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml @@ -23,13 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 35 @@ -103,7 +96,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml index e5e9962b2174..bca903b5da6d 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml @@ -23,13 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 33 @@ -97,7 +90,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml new file mode 100644 index 000000000000..3b5045730471 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SoC LPASS LPI TLMM Common Properties + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Common properties for the Top Level Mode Multiplexer pin controllers in the + Low Power Audio SubSystem (LPASS) Low Power Island (LPI) of Qualcomm SoCs. + +properties: + gpio-controller: true + + "#gpio-cells": + description: + Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +required: + - gpio-controller + - "#gpio-cells" + - gpio-ranges + +allOf: + - $ref: pinctrl.yaml# + +additionalProperties: true + +$defs: + qcom-tlmm-state: + properties: + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-bus-hold: true + bias-pull-down: true + bias-pull-up: true + bias-disable: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + - function + + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + additionalProperties: true + diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml index 5ece3b9d676b..bd3cbb44c99a 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml @@ -25,19 +25,7 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true gpio-reserved-ranges: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg - -additionalProperties: false patternProperties: "-state$": @@ -110,6 +98,12 @@ $defs: required: - pins +required: + - compatible + - reg + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml index 5885aee95c98..299e0b4b0ab4 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml @@ -23,18 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - '#interrupt-cells': true - gpio-controller: true - '#gpio-cells': true - gpio-ranges: true - -required: - - compatible - - reg - -additionalProperties: false - patternProperties: "-state$": oneOf: @@ -74,6 +62,12 @@ $defs: required: - pins +required: + - compatible + - reg + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml index a602bf0d27fb..68d3fa2105b8 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml @@ -23,12 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - gpio-reserved-ranges: maxItems: 1 @@ -82,7 +76,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml index a05971611780..61f5be21f30c 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml @@ -23,13 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 86 @@ -92,7 +85,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml index 5095e86fe9a2..295dd5fcf4c3 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml @@ -25,19 +25,7 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true gpio-reserved-ranges: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg - -additionalProperties: false patternProperties: "-state$": @@ -108,6 +96,12 @@ $defs: required: - pins +required: + - compatible + - reg + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml index 063d004967bb..904af87f9eaf 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml @@ -23,13 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 61 @@ -114,7 +107,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml index 798aac9e6e31..8a3a962f6c00 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml @@ -22,12 +22,7 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true gpio-reserved-ranges: true - "#gpio-cells": true - gpio-ranges: true patternProperties: "-state$": @@ -117,7 +112,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml index 9172b50f7a98..46618740bd31 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml @@ -23,13 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 76 @@ -108,7 +101,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml index 8a3be65c51ed..840fdaabde12 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml @@ -23,13 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 73 @@ -124,7 +117,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml index ca95de0b87a6..d4391c194ff7 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml @@ -23,13 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 73 @@ -104,7 +97,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml index 41525ecfa8e3..fa90981db40b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml @@ -25,13 +25,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 73 @@ -114,7 +107,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml index 59d406b60957..c5010c175b23 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml @@ -23,13 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 75 @@ -133,7 +126,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml index bd6d7caf499a..bcaa231adaf7 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml @@ -23,13 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 75 @@ -118,7 +111,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml index 80f960671857..fe717d8d4798 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml @@ -158,34 +158,40 @@ examples: - | #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> - pm8841_mpp: mpps@a000 { - compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp"; - reg = <0xa000 0>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pm8841_mpp 0 0 4>; - gpio-line-names = "VDD_PX_BIAS", "WLAN_LED_CTRL", - "BT_LED_CTRL", "GPIO-F"; - interrupt-controller; - #interrupt-cells = <2>; - - pinctrl-names = "default"; - pinctrl-0 = <&pm8841_default>; - - mpp1-state { - pins = "mpp1"; - function = "digital"; - input-enable; - power-source = <PM8841_MPP_S3>; - }; - - default-state { - gpio-pins { - pins = "mpp1", "mpp2", "mpp3", "mpp4"; - function = "digital"; - input-enable; - power-source = <PM8841_MPP_S3>; + pmic { + #address-cells = <1>; + #size-cells = <0>; + + pm8841_mpp: mpps@a000 { + compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp"; + reg = <0xa000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8841_mpp 0 0 4>; + gpio-line-names = "VDD_PX_BIAS", "WLAN_LED_CTRL", + "BT_LED_CTRL", "GPIO-F"; + interrupt-controller; + #interrupt-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pm8841_default>; + + mpp1-state { + pins = "mpp1"; + function = "digital"; + input-enable; + power-source = <PM8841_MPP_S3>; + }; + + default-state { + gpio-pins { + pins = "mpp1", "mpp2", "mpp3", "mpp4"; + function = "digital"; + input-enable; + power-source = <PM8841_MPP_S3>; + }; + }; }; - }; }; ... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml index c323f6d495a4..e123beb33aef 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml @@ -22,13 +22,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - patternProperties: "-state$": oneOf: @@ -92,7 +85,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml index b1b9cd319e50..4009501b3414 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml @@ -29,13 +29,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 60 @@ -130,7 +123,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml index 237cac4f6ce1..88afeae530c6 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml @@ -23,10 +23,8 @@ properties: reg: maxItems: 1 - interrupts: true - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true + interrupts: + maxItems: 1 gpio-reserved-ranges: minItems: 1 @@ -35,10 +33,6 @@ properties: gpio-line-names: maxItems: 151 - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - patternProperties: "-state$": oneOf: @@ -101,7 +95,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml index 2173c5255638..e9abbf2c0689 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml @@ -22,13 +22,8 @@ properties: reg: maxItems: 1 - interrupts: true - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true + interrupts: + maxItems: 1 gpio-reserved-ranges: minItems: 1 @@ -37,12 +32,6 @@ properties: gpio-line-names: maxItems: 148 -required: - - compatible - - reg - -additionalProperties: false - patternProperties: "-state$": oneOf: @@ -108,6 +97,12 @@ $defs: required: - pins +required: + - compatible + - reg + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml index 573e459b1c44..5606f2136ad1 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml @@ -29,13 +29,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 60 @@ -112,7 +105,7 @@ required: - reg - reg-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml index 00c5a00e35fc..08801cc4e476 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml @@ -20,16 +20,6 @@ properties: reg: maxItems: 2 - gpio-controller: true - - "#gpio-cells": - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - patternProperties: "-state$": oneOf: @@ -45,7 +35,8 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: /schemas/pinctrl/pincfg-node.yaml + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -68,42 +59,14 @@ $defs: Specify the alternative function to be configured for the specified pins. - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - slew-rate: - enum: [0, 1, 2, 3] - default: 0 - description: | - 0: No adjustments - 1: Higher Slew rate (faster edges) - 2: Lower Slew rate (slower edges) - 3: Reserved (No adjustments) - - bias-pull-down: true - bias-pull-up: true - bias-bus-hold: true - bias-disable: true - output-high: true - output-low: true - - required: - - pins - - function - - additionalProperties: false - required: - compatible - reg - - gpio-controller - - "#gpio-cells" - - gpio-ranges -additionalProperties: false +allOf: + - $ref: qcom,lpass-lpi-common.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml index c8735ab97e40..5329fe2a4397 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml @@ -23,24 +23,6 @@ properties: description: Specifies the TLMM summary IRQ maxItems: 1 - interrupt-controller: true - - '#interrupt-cells': - description: - Specifies the PIN numbers and Flags, as defined in defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - - gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - gpio-reserved-ranges: minItems: 1 maxItems: 88 @@ -48,8 +30,6 @@ properties: gpio-line-names: maxItems: 175 - wakeup-parent: true - patternProperties: "-state$": oneOf: @@ -124,14 +104,8 @@ allOf: required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges - -additionalProperties: false + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml index b086a5184235..c122bb849f0f 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml @@ -31,20 +31,7 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - '#interrupt-cells': true - gpio-controller: true gpio-reserved-ranges: true - '#gpio-cells': true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg - - reg-names - -additionalProperties: false patternProperties: "-state$": @@ -106,6 +93,13 @@ $defs: required: - pins +required: + - compatible + - reg + - reg-names + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml index a9167dac9ab5..240e6d45cc95 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml @@ -32,16 +32,6 @@ properties: - const: core - const: audio - gpio-controller: true - - "#gpio-cells": - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - patternProperties: "-state$": oneOf: @@ -57,7 +47,8 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: /schemas/pinctrl/pincfg-node.yaml + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -79,48 +70,16 @@ $defs: Specify the alternative function to be configured for the specified pins. - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - slew-rate: - enum: [0, 1, 2, 3] - default: 0 - description: | - 0: No adjustments - 1: Higher Slew rate (faster edges) - 2: Lower Slew rate (slower edges) - 3: Reserved (No adjustments) - - bias-bus-hold: true - bias-pull-down: true - bias-pull-up: true - bias-disable: true - input-enable: true - output-high: true - output-low: true - - required: - - pins - - function - - additionalProperties: false - allOf: - - $ref: pinctrl.yaml# + - $ref: qcom,lpass-lpi-common.yaml# required: - compatible - reg - clocks - clock-names - - gpio-controller - - "#gpio-cells" - - gpio-ranges -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml index 4bd6d7977d3e..ed344deaf8b9 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml @@ -25,19 +25,7 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true gpio-reserved-ranges: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg - -additionalProperties: false patternProperties: "-state$": @@ -108,6 +96,12 @@ $defs: required: - pins +required: + - compatible + - reg + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml index 508e0633b253..a00cb43df144 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml @@ -34,10 +34,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - gpio-reserved-ranges: minItems: 1 maxItems: 57 @@ -45,10 +41,6 @@ properties: gpio-line-names: maxItems: 114 - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - patternProperties: "-state$": oneOf: @@ -130,7 +122,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml index 84a15f77e710..b56e717aa28e 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml @@ -25,23 +25,10 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true gpio-reserved-ranges: minItems: 1 maxItems: 75 - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg - -additionalProperties: false - patternProperties: "-state$": oneOf: @@ -98,6 +85,12 @@ $defs: required: - pins +required: + - compatible + - reg + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml index d301881ddfa8..dfe5616b9b85 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml @@ -26,10 +26,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - gpio-reserved-ranges: minItems: 1 maxItems: 75 @@ -37,10 +33,6 @@ properties: gpio-line-names: maxItems: 150 - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - patternProperties: "-state$": oneOf: @@ -110,7 +102,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml index 67af99dd8f14..edbcff92bbf9 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml @@ -23,12 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - gpio-reserved-ranges: maxItems: 1 @@ -102,7 +96,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml index 27319782d94b..a31b638c456d 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml @@ -22,12 +22,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - gpio-reserved-ranges: maxItems: 1 @@ -122,7 +116,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml index 7cb96aa75b08..cb1d978d02c9 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml @@ -22,10 +22,8 @@ properties: reg: maxItems: 1 - interrupts: true - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true + interrupts: + maxItems: 1 gpio-reserved-ranges: minItems: 1 @@ -34,10 +32,6 @@ properties: gpio-line-names: maxItems: 133 - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - patternProperties: "-state$": oneOf: @@ -100,7 +94,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml new file mode 100644 index 000000000000..bb08ca5a1509 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml @@ -0,0 +1,151 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm4450-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SM4450 TLMM block + +maintainers: + - Tengfei Fan <quic_tengfan@quicinc.com> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM4450 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sm4450-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 68 + + gpio-line-names: + maxItems: 136 + + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm4450-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm4450-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm4450-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-5])$" + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2, + atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02, + atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng, + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, + dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c, + jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, + mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, + mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0, + mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk, + phase_flag0, phase_flag1, phase_flag10, phase_flag11, + phase_flag12, phase_flag13, phase_flag14, phase_flag15, + phase_flag16, phase_flag17, phase_flag18, phase_flag19, + phase_flag2, phase_flag20, phase_flag21, phase_flag22, + phase_flag23, phase_flag24, phase_flag25, phase_flag26, + phase_flag27, phase_flag28, phase_flag29, phase_flag3, + phase_flag30, phase_flag31, phase_flag4, phase_flag5, + phase_flag6, phase_flag7, phase_flag8, phase_flag9, + pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2, + prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1, + qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, + qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, + qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable, + qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request, + qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, + qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5, + qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3, + qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0, + tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1, + tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, + uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data, + uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1, + vsense_trigger ] + + required: + - pins + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f100000 { + compatible = "qcom,sm4450-tlmm"; + reg = <0x0f100000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 137>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-state { + rx-pins { + pins = "gpio23"; + function = "qup1_se2"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio22"; + function = "qup1_se2"; + bias-disable; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml index abac3311fc55..f4cf2ce86fcd 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml @@ -31,16 +31,6 @@ properties: items: - const: audio - gpio-controller: true - - "#gpio-cells": - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - patternProperties: "-state$": oneOf: @@ -56,7 +46,8 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: /schemas/pinctrl/pincfg-node.yaml + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -75,48 +66,17 @@ $defs: Specify the alternative function to be configured for the specified pins. - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - slew-rate: - enum: [0, 1, 2, 3] - default: 0 - description: | - 0: No adjustments - 1: Higher Slew rate (faster edges) - 2: Lower Slew rate (slower edges) - 3: Reserved (No adjustments) - - bias-bus-hold: true - bias-pull-down: true - bias-pull-up: true - bias-disable: true - input-enable: true - output-high: true - output-low: true - - required: - - pins - - function - - additionalProperties: false allOf: - - $ref: pinctrl.yaml# + - $ref: qcom,lpass-lpi-common.yaml# required: - compatible - reg - clocks - clock-names - - gpio-controller - - "#gpio-cells" - - gpio-ranges -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml index 871df54f69a2..7f36f9b93333 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml @@ -29,13 +29,7 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true gpio-reserved-ranges: true - wakeup-parent: true patternProperties: "-state$": @@ -97,7 +91,7 @@ required: - reg - reg-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml index 8d77707b02b9..ddeaeaa9a450 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml @@ -30,20 +30,7 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true gpio-reserved-ranges: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg - - reg-names - -additionalProperties: false patternProperties: "-state$": @@ -105,6 +92,13 @@ $defs: required: - pins +required: + - compatible + - reg + - reg-names + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml index 27af379cf791..a4771f87d936 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml @@ -26,10 +26,6 @@ properties: minItems: 9 maxItems: 9 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - gpio-reserved-ranges: minItems: 1 maxItems: 78 @@ -37,16 +33,6 @@ properties: gpio-line-names: maxItems: 156 - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg - -additionalProperties: false - patternProperties: "-state$": oneOf: @@ -112,6 +98,12 @@ $defs: required: - pins +required: + - compatible + - reg + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml index 6e02ba24825f..047f82863f9b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml @@ -25,19 +25,7 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true gpio-reserved-ranges: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg - -additionalProperties: false patternProperties: "-state$": @@ -113,6 +101,12 @@ $defs: required: - pins +required: + - compatible + - reg + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml index ede0f3acad9c..7f23f939ad32 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml @@ -32,13 +32,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 60 @@ -111,7 +104,7 @@ required: - reg - reg-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml index c6439626464e..bdb7ed4be026 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml @@ -30,13 +30,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 88 @@ -113,7 +106,7 @@ required: - reg - reg-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml index 4b4be7efc150..750c996c10a7 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml @@ -30,16 +30,6 @@ properties: - const: core - const: audio - gpio-controller: true - - "#gpio-cells": - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - patternProperties: "-state$": oneOf: @@ -55,7 +45,8 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: /schemas/pinctrl/pincfg-node.yaml + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -78,48 +69,16 @@ $defs: Specify the alternative function to be configured for the specified pins. - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - slew-rate: - enum: [0, 1, 2, 3] - default: 0 - description: | - 0: No adjustments - 1: Higher Slew rate (faster edges) - 2: Lower Slew rate (slower edges) - 3: Reserved (No adjustments) - - bias-pull-down: true - bias-pull-up: true - bias-bus-hold: true - bias-disable: true - input-enable: true - output-high: true - output-low: true - - required: - - pins - - function - - additionalProperties: false - allOf: - - $ref: pinctrl.yaml# + - $ref: qcom,lpass-lpi-common.yaml# required: - compatible - reg - clocks - clock-names - - gpio-controller - - "#gpio-cells" - - gpio-ranges -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml index 021c54708524..b5d04347c064 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml @@ -28,13 +28,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 90 @@ -106,7 +99,7 @@ required: - reg - reg-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml index 2e65ae08dd21..9d782f910b31 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml @@ -33,16 +33,6 @@ properties: - const: core - const: audio - gpio-controller: true - - "#gpio-cells": - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - patternProperties: "-state$": oneOf: @@ -58,7 +48,8 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: /schemas/pinctrl/pincfg-node.yaml + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -81,48 +72,16 @@ $defs: Specify the alternative function to be configured for the specified pins. - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - slew-rate: - enum: [0, 1, 2, 3] - default: 0 - description: | - 0: No adjustments - 1: Higher Slew rate (faster edges) - 2: Lower Slew rate (slower edges) - 3: Reserved (No adjustments) - - bias-bus-hold: true - bias-pull-down: true - bias-pull-up: true - bias-disable: true - input-enable: true - output-high: true - output-low: true - - required: - - pins - - function - - additionalProperties: false - allOf: - - $ref: pinctrl.yaml# + - $ref: qcom,lpass-lpi-common.yaml# required: - compatible - reg - clocks - clock-names - - gpio-controller - - "#gpio-cells" - - gpio-ranges -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml index 6e8f41ff0a76..ec5e09611d81 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml @@ -25,10 +25,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - gpio-reserved-ranges: minItems: 1 maxItems: 102 @@ -36,16 +32,6 @@ properties: gpio-line-names: maxItems: 203 - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg - -additionalProperties: false - patternProperties: "-state$": oneOf: @@ -108,6 +94,12 @@ $defs: required: - pins +required: + - compatible + - reg + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml index 1eefa9aa6a86..e7565592da86 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml @@ -32,16 +32,6 @@ properties: - const: core - const: audio - gpio-controller: true - - "#gpio-cells": - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - patternProperties: "-state$": oneOf: @@ -57,7 +47,8 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: /schemas/pinctrl/pincfg-node.yaml + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -81,48 +72,16 @@ $defs: Specify the alternative function to be configured for the specified pins. - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - slew-rate: - enum: [0, 1, 2, 3] - default: 0 - description: | - 0: No adjustments - 1: Higher Slew rate (faster edges) - 2: Lower Slew rate (slower edges) - 3: Reserved (No adjustments) - - bias-bus-hold: true - bias-pull-down: true - bias-pull-up: true - bias-disable: true - input-enable: true - output-high: true - output-low: true - - required: - - pins - - function - - additionalProperties: false - allOf: - - $ref: pinctrl.yaml# + - $ref: qcom,lpass-lpi-common.yaml# required: - compatible - reg - clocks - clock-names - - gpio-controller - - "#gpio-cells" - - gpio-ranges -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml index 5163fe3f5365..16fd2c5e2339 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml @@ -25,10 +25,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - gpio-reserved-ranges: minItems: 1 maxItems: 105 @@ -36,16 +32,6 @@ properties: gpio-line-names: maxItems: 210 - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg - -additionalProperties: false - patternProperties: "-state$": oneOf: @@ -107,6 +93,12 @@ $defs: required: - pins +required: + - compatible + - reg + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml index ef9743246849..bf4a72facae1 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml @@ -16,7 +16,11 @@ description: properties: compatible: - const: qcom,sm8550-lpass-lpi-pinctrl + oneOf: + - const: qcom,sm8550-lpass-lpi-pinctrl + - items: + - const: qcom,x1e80100-lpass-lpi-pinctrl + - const: qcom,sm8550-lpass-lpi-pinctrl reg: items: @@ -33,16 +37,6 @@ properties: - const: core - const: audio - gpio-controller: true - - "#gpio-cells": - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - patternProperties: "-state$": oneOf: @@ -58,7 +52,8 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: /schemas/pinctrl/pincfg-node.yaml + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -81,48 +76,16 @@ $defs: Specify the alternative function to be configured for the specified pins. - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - slew-rate: - enum: [0, 1, 2, 3] - default: 0 - description: | - 0: No adjustments - 1: Higher Slew rate (faster edges) - 2: Lower Slew rate (slower edges) - 3: Reserved (No adjustments) - - bias-bus-hold: true - bias-pull-down: true - bias-pull-up: true - bias-disable: true - input-enable: true - output-high: true - output-low: true - - required: - - pins - - function - - additionalProperties: false - allOf: - - $ref: pinctrl.yaml# + - $ref: qcom,lpass-lpi-common.yaml# required: - compatible - reg - clocks - clock-names - - gpio-controller - - "#gpio-cells" - - gpio-ranges -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml index f789c7753a92..c2ae79df424f 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml @@ -22,10 +22,8 @@ properties: reg: maxItems: 1 - interrupts: true - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true + interrupts: + maxItems: 1 gpio-reserved-ranges: minItems: 1 @@ -34,10 +32,6 @@ properties: gpio-line-names: maxItems: 210 - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - patternProperties: "-state$": oneOf: @@ -117,7 +111,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml new file mode 100644 index 000000000000..db7214362301 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8650 SoC LPASS LPI TLMM + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM8650 SoC. + +properties: + compatible: + const: qcom,sm8650-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + + clocks: + items: + - description: LPASS Core voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: core + - const: audio + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8650-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8650-lpass-state" + additionalProperties: false + +$defs: + qcom-sm8650-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-9]|2[0-2])$" + + function: + enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk, + dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b, + ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk, + i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk, + i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk, + i2s4_data, i2s4_ws, qca_swr_clk, qca_swr_data, slimbus_clk, + slimbus_data, swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data, + wsa_swr_clk, wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ] + description: + Specify the alternative function to be configured for the specified + pins. + +allOf: + - $ref: qcom,lpass-lpi-common.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> + + lpass_tlmm: pinctrl@6e80000 { + compatible = "qcom,sm8650-lpass-lpi-pinctrl"; + reg = <0x06e80000 0x20000>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + tx-swr-sleep-clk-state { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + bias-pull-down; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-tlmm.yaml new file mode 100644 index 000000000000..c0a06abf851d --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-tlmm.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8650-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SM8650 TLMM block + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM8650 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sm8650-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 105 + + gpio-line-names: + maxItems: 210 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8650-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8650-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm8650-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$" + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ gpio, aoss_cti, atest_char, atest_usb, audio_ext_mclk0, + audio_ext_mclk1, audio_ref_clk, cam_aon_mclk2, cam_aon_mclk4, + cam_mclk, cci_async_in, cci_i2c_scl, cci_i2c_sda, cci_timer, + cmu_rng, coex_uart1_rx, coex_uart1_tx, coex_uart2_rx, + coex_uart2_tx, cri_trng, dbg_out_clk, ddr_bist_complete, + ddr_bist_fail, ddr_bist_start, ddr_bist_stop, ddr_pxi0, + ddr_pxi1, ddr_pxi2, ddr_pxi3, do_not, dp_hot, gcc_gp1, + gcc_gp2, gcc_gp3, gnss_adc0, gnss_adc1, i2chub0_se0, + i2chub0_se1, i2chub0_se2, i2chub0_se3, i2chub0_se4, + i2chub0_se5, i2chub0_se6, i2chub0_se7, i2chub0_se8, + i2chub0_se9, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws, + i2s1_data0, i2s1_data1, i2s1_sck, i2s1_ws, ibi_i3c, + jitter_bist, mdp_vsync, mdp_vsync0_out, mdp_vsync1_out, + mdp_vsync2_out, mdp_vsync3_out, mdp_vsync_e, nav_gpio0, + nav_gpio1, nav_gpio2, nav_gpio3, pcie0_clk_req_n, + pcie1_clk_req_n, phase_flag, pll_bist_sync, pll_clk_aux, + prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, + qdss_gpio, qlink_big_enable, qlink_big_request, + qlink_little_enable, qlink_little_request, qlink_wmss, + qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qup1_se0, + qup1_se1, qup1_se2, qup1_se3, qup1_se4, qup1_se5, qup1_se6, + qup1_se7, qup2_se0, qup2_se1, qup2_se2, qup2_se3, qup2_se4, + qup2_se5, qup2_se6, qup2_se7, sd_write_protect, sdc40, sdc41, + sdc42, sdc43, sdc4_clk, sdc4_cmd, tb_trig_sdc2, tb_trig_sdc4, + tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout, + tgu_ch3_trigout, tmess_prng0, tmess_prng1, tmess_prng2, + tmess_prng3, tsense_pwm1, tsense_pwm2, tsense_pwm3, uim0_clk, + uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data, + uim1_present, uim1_reset, usb1_hs, usb_phy, vfr_0, vfr_1, + vsense_trigger_mirnat ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8650-tlmm"; + reg = <0x0f100000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 211>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-state { + rx-pins { + pins = "gpio60"; + function = "qup1_se7"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio61"; + function = "qup1_se7"; + bias-disable; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,x1e80100-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,x1e80100-tlmm.yaml new file mode 100644 index 000000000000..a1333e0743a9 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,x1e80100-tlmm.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. X1E80100 TLMM block + +maintainers: + - Rajendra Nayak <quic_rjendra@quicinc.com> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm X1E80100 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,x1e80100-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 119 + + gpio-line-names: + maxItems: 238 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-x1e80100-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-x1e80100-tlmm-state" + additionalProperties: false + +$defs: + qcom-x1e80100-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-2][0-9]|23[0-7])$" + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ aon_cci, aoss_cti, atest_char, atest_char0, + atest_char1, atest_char2, atest_char3, atest_usb, + audio_ext, audio_ref, cam_aon, cam_mclk, cci_async, + cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, + cci_timer4, cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, + cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, + ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5, ddr_pxi6, ddr_pxi7, + edp0_hot, edp0_lcd, edp1_hot, edp1_lcd, eusb0_ac, eusb1_ac, + eusb2_ac, eusb3_ac, eusb5_ac, eusb6_ac, gcc_gp1, gcc_gp2, + gcc_gp3, gpio, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws, i2s1_data0, + i2s1_data1, i2s1_sck, i2s1_ws, ibi_i3c, jitter_bist, mdp_vsync0, + mdp_vsync1, mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, + mdp_vsync6, mdp_vsync7, mdp_vsync8, pcie3_clk, pcie4_clk, + pcie5_clk, pcie6a_clk, pcie6b_clk, phase_flag, pll_bist, pll_clk, + prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, + qdss_gpio, qspi00, qspi01, qspi02, qspi03, qspi0_clk, qspi0_cs0, + qspi0_cs1, qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, + qup0_se5, qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3, + qup1_se4, qup1_se5, qup1_se6, qup1_se7, qup2_se0, qup2_se1, qup2_se2, + qup2_se3, qup2_se4, qup2_se5, qup2_se6, qup2_se7, sd_write, sdc4_clk, + sdc4_cmd, sdc4_data0, sdc4_data1, sdc4_data2, sdc4_data3, sys_throttle, + tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5, + tgu_ch6, tgu_ch7, tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3, + tsense_pwm1, tsense_pwm2, sense_pwm3, tsense_pwm4, usb0_dp, usb0_phy, + usb0_sbrx, usb0_sbtx, usb1_dp, usb1_phy, usb1_sbrx, usb1_sbtx, + usb2_dp, usb2_phy, usb2_sbrx, usb2_sbtx, vsense_trigger ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f100000 { + compatible = "qcom,x1e80100-tlmm"; + reg = <0x0f100000 0xf00000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 239>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-state { + rx-pins { + pins = "gpio26"; + function = "qup2_se7"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio27"; + function = "qup2_se7"; + bias-disable; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml index 8271e7b2c162..8b8e4e1a000f 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml @@ -20,7 +20,7 @@ description: properties: compatible: - const: "renesas,r7s9210-pinctrl" # RZ/A2M + const: renesas,r7s9210-pinctrl # RZ/A2M reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index b5ca40d0e251..d476de82e5c3 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -185,17 +185,17 @@ examples: sd1_mux { pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */ <RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */ - power-source = <3300>; + power-source = <3300>; }; sd1_data { pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; - power-source = <3300>; + power-source = <3300>; }; sd1_ctrl { pins = "SD1_CLK", "SD1_CMD"; - power-source = <3300>; + power-source = <3300>; }; }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml index 1de91a51234d..4dfb49b0e07f 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml @@ -28,15 +28,27 @@ description: | properties: compatible: - enum: - - samsung,s3c2410-wakeup-eint - - samsung,s3c2412-wakeup-eint - - samsung,s3c64xx-wakeup-eint - - samsung,s5pv210-wakeup-eint - - samsung,exynos4210-wakeup-eint - - samsung,exynos7-wakeup-eint - - samsung,exynos850-wakeup-eint - - samsung,exynosautov9-wakeup-eint + oneOf: + - enum: + - samsung,s3c2410-wakeup-eint + - samsung,s3c2412-wakeup-eint + - samsung,s3c64xx-wakeup-eint + - samsung,s5pv210-wakeup-eint + - samsung,exynos4210-wakeup-eint + - samsung,exynos7-wakeup-eint + - samsung,exynosautov920-wakeup-eint + - items: + - enum: + - samsung,exynos5433-wakeup-eint + - samsung,exynos7885-wakeup-eint + - samsung,exynos850-wakeup-eint + - const: samsung,exynos7-wakeup-eint + - items: + - enum: + - google,gs101-wakeup-eint + - samsung,exynosautov9-wakeup-eint + - const: samsung,exynos850-wakeup-eint + - const: samsung,exynos7-wakeup-eint interrupts: description: @@ -79,11 +91,14 @@ allOf: - if: properties: compatible: - contains: - enum: - - samsung,s5pv210-wakeup-eint - - samsung,exynos4210-wakeup-eint - - samsung,exynos7-wakeup-eint + # Match without "contains", to skip newer variants which are still + # compatible with samsung,exynos7-wakeup-eint + enum: + - samsung,s5pv210-wakeup-eint + - samsung,exynos4210-wakeup-eint + - samsung,exynos5433-wakeup-eint + - samsung,exynos7-wakeup-eint + - samsung,exynos7885-wakeup-eint then: properties: interrupts: @@ -98,7 +113,7 @@ allOf: contains: enum: - samsung,exynos850-wakeup-eint - - samsung,exynosautov9-wakeup-eint + - samsung,exynosautov920-wakeup-eint then: properties: interrupts: false diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml index 26614621774a..118549c25976 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml @@ -35,6 +35,7 @@ properties: compatible: enum: + - google,gs101-pinctrl - samsung,s3c2412-pinctrl - samsung,s3c2416-pinctrl - samsung,s3c2440-pinctrl @@ -53,6 +54,7 @@ properties: - samsung,exynos7885-pinctrl - samsung,exynos850-pinctrl - samsung,exynosautov9-pinctrl + - samsung,exynosautov920-pinctrl - tesla,fsd-pinctrl interrupts: @@ -313,7 +315,8 @@ examples: pinctrl-0 = <&initial_alive>; wakeup-interrupt-controller { - compatible = "samsung,exynos7-wakeup-eint"; + compatible = "samsung,exynos5433-wakeup-eint", + "samsung,exynos7-wakeup-eint"; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml index b85f9e36ce4b..d2676f92ef5b 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml @@ -39,7 +39,7 @@ properties: phandle to the SLCR. patternProperties: - '^(.*-)?(default|gpio)$': + '^(.*-)?(default|gpio-grp)$': type: object patternProperties: '^mux': diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml index 01b6f2b57843..f13d315b5d5e 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml @@ -31,7 +31,7 @@ properties: const: xlnx,zynqmp-pinctrl patternProperties: - '^(.*-)?(default|gpio)$': + '^(.*-)?(default|gpio-grp)$': type: object patternProperties: '^mux': |