diff options
Diffstat (limited to 'Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt')
-rw-r--r-- | Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt | 102 |
1 files changed, 0 insertions, 102 deletions
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt deleted file mode 100644 index 27a48bf1b185..000000000000 --- a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt +++ /dev/null @@ -1,102 +0,0 @@ -Binding for Samsung S2M family regulator block -============================================== - -This is a part of device tree bindings for S2M family multi-function devices. -More information can be found in bindings/mfd/sec-core.txt file. - -The S2MPS11/13/14/15 and S2MPU02 devices provide buck and LDO regulators. - -To register these with regulator framework instantiate under main device node -a sub-node named "regulators" with more sub-nodes for each regulator using the -common regulator binding documented in: - - Documentation/devicetree/bindings/regulator/regulator.txt - - -Names of regulators supported by different devices: - - LDOn - - valid values for n are: - - S2MPS11: 1 to 38 - - S2MPS13: 1 to 40 - - S2MPS14: 1 to 25 - - S2MPS15: 1 to 27 - - S2MPU02: 1 to 28 - - Example: LDO1, LDO2, LDO28 - - BUCKn - - valid values for n are: - - S2MPS11: 1 to 10 - - S2MPS13: 1 to 10 - - S2MPS14: 1 to 5 - - S2MPS15: 1 to 10 - - S2MPU02: 1 to 7 - - Example: BUCK1, BUCK2, BUCK9 -Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number -as per the datasheet of device. - - -Optional properties of the nodes under "regulators" sub-node: - - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500, - 25000 (default) or 50000. - - Additionally S2MPS11 supports disabling ramp delay for BUCK{2,3,4,6} - by setting it to <0>. - - Note: On S2MPS11 some bucks share the ramp rate setting i.e. same ramp value - will be set for a particular group of bucks so provide the same - regulator-ramp-delay value for them. - Groups sharing ramp rate: - - buck{1,6}, - - buck{3,4}, - - buck{7,8,10}. - - - samsung,ext-control-gpios: On S2MPS14 the LDO10, LDO11 and LDO12 can be - configured to external control over GPIO. To turn this feature on this - property must be added to the regulator sub-node: - - samsung,ext-control-gpios: GPIO specifier for one GPIO - controlling this regulator (enable/disable) - Example: - LDO12 { - regulator-name = "V_EMMC_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - samsung,ext-control-gpios = <&gpk0 2 0>; - }; - - -Example: - - s2mps11_pmic@66 { - compatible = "samsung,s2mps11-pmic"; - reg = <0x66>; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ABB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDD_ALIVE_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-ramp-delay = <50000>; - }; - }; - }; |