diff options
Diffstat (limited to 'Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml | 171 |
1 files changed, 171 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml new file mode 100644 index 000000000000..7afafde17a38 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/qcom,rpm-proc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Resource Power Manager (RPM) Processor/Subsystem + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Konrad Dybcio <konrad.dybcio@linaro.org> + - Stephan Gerhold <stephan@gerhold.net> + +description: | + Resource Power Manager (RPM) subsystem found in various Qualcomm platforms: + + +--------------------------------------------+ + | RPM subsystem (qcom,rpm-proc) | + | | + reset | +---------------+ +-----+ +-----+ | + --------->| | | MPM | | CPR | ... | + IPC interrupts | | ARM Cortex-M3 |--- +-----+ +-----+ | + ----------------->| | | | | | + | +---------------+ |---------------------- | + | +---------------+ | | + | | Code RAM |--| +------------------+ | + | +---------------+ | | | | + | +---------------+ |--| Message RAM | | + | | Data RAM |--| | | | + | +---------------+ | +------------------+ | + +--------------------|-----------------------+ + v + NoC + + The firmware running on the processor inside the RPM subsystem allows each + component in the system to vote for state of the system resources, such as + clocks, regulators and bus frequencies. It implements multiple separate + communication interfaces that are described in subnodes, e.g. SMD and MPM: + + +------------------------------+ + | ARM Cortex-M3 | + | | +------------------------------+ + | +--------------------------+ | | Message RAM | + | | RPM firmware | | | | + IPC IRQ 0 | | +----------------------+ | | | +--------------------------+ | + -------------->| SMD server |<------->| SMD data structures | | + | | | +--------------+ | | | | | +--------------+ | | + | | | | rpm_requests | ... | | | | | | rpm_requests | ... | | + | | | +--------------+ | | | | | +--------------+ | | + IPC IRQ 1 | | +----------------------+ | | | +--------------------------+ | + -------------->| MPM virtualization |<--------| MPM register copy (vMPM) | | + | | +----------------------+ | | | +--------------------------+ | + | | ... | | | | ... | + | +--------------------|-----+ | +------------------------------+ + +----------------------|-------+ + v + +--------------+ + | MPM Hardware | + +--------------+ + + The services provided by the firmware are only available after the firmware + has been loaded and the processor has been released from reset. Usually this + happens early in the boot process before the operating system is started. + +properties: + compatible: + items: + - enum: + - qcom,apq8084-rpm-proc + - qcom,ipq6018-rpm-proc + - qcom,ipq9574-rpm-proc + - qcom,mdm9607-rpm-proc + - qcom,msm8226-rpm-proc + - qcom,msm8610-rpm-proc + - qcom,msm8909-rpm-proc + - qcom,msm8916-rpm-proc + - qcom,msm8917-rpm-proc + - qcom,msm8936-rpm-proc + - qcom,msm8937-rpm-proc + - qcom,msm8952-rpm-proc + - qcom,msm8953-rpm-proc + - qcom,msm8974-rpm-proc + - qcom,msm8976-rpm-proc + - qcom,msm8994-rpm-proc + - qcom,msm8996-rpm-proc + - qcom,msm8998-rpm-proc + - qcom,qcm2290-rpm-proc + - qcom,qcs404-rpm-proc + - qcom,sdm660-rpm-proc + - qcom,sm6115-rpm-proc + - qcom,sm6125-rpm-proc + - qcom,sm6375-rpm-proc + - const: qcom,rpm-proc + + smd-edge: + $ref: /schemas/remoteproc/qcom,smd-edge.yaml# + description: + Qualcomm Shared Memory subnode which represents communication edge, + channels and devices related to the RPM subsystem. + + glink-edge: + $ref: /schemas/remoteproc/qcom,glink-rpm-edge.yaml# + description: + Qualcomm G-Link subnode which represents communication edge, + channels and devices related to the RPM subsystem. + + interrupt-controller: + type: object + $ref: /schemas/interrupt-controller/qcom,mpm.yaml# + description: + MSM Power Manager (MPM) interrupt controller that monitors interrupts + when the system is asleep. + + master-stats: + $ref: /schemas/soc/qcom/qcom,rpm-master-stats.yaml# + description: + Subsystem-level low-power mode statistics provided by RPM. + +required: + - compatible + +oneOf: + - required: + - smd-edge + - required: + - glink-edge + +additionalProperties: false + +examples: + # SMD + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + remoteproc { + compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc"; + + smd-edge { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm-requests { + compatible = "qcom,rpm-msm8916"; + qcom,smd-channels = "rpm_requests"; + /* ... */ + }; + }; + }; + # GLINK + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + remoteproc { + compatible = "qcom,qcm2290-rpm-proc", "qcom,rpm-proc"; + + glink-edge { + compatible = "qcom,glink-rpm"; + interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm-requests { + compatible = "qcom,rpm-qcm2290"; + qcom,glink-channels = "rpm_requests"; + /* ... */ + }; + }; + }; |