diff options
Diffstat (limited to 'Documentation/devicetree/bindings/reset/uniphier-reset.txt')
-rw-r--r-- | Documentation/devicetree/bindings/reset/uniphier-reset.txt | 61 |
1 files changed, 0 insertions, 61 deletions
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt deleted file mode 100644 index 88e06e5e8d23..000000000000 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ /dev/null @@ -1,61 +0,0 @@ -UniPhier glue reset controller - - -Peripheral core reset in glue layer ------------------------------------ - -Some peripheral core reset belongs to its own glue layer. Before using -this core reset, it is necessary to control the clocks and resets to enable -this layer. These clocks and resets should be described in each property. - -Required properties: -- compatible: Should be - "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC USB3 - "socionext,uniphier-pro5-usb3-reset" - for Pro5 SoC USB3 - "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC USB3 - "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC USB3 - "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC USB3 - "socionext,uniphier-pro4-ahci-reset" - for Pro4 SoC AHCI - "socionext,uniphier-pxs2-ahci-reset" - for PXs2 SoC AHCI - "socionext,uniphier-pxs3-ahci-reset" - for PXs3 SoC AHCI -- #reset-cells: Should be 1. -- reg: Specifies offset and length of the register set for the device. -- clocks: A list of phandles to the clock gate for the glue layer. - According to the clock-names, appropriate clocks are required. -- clock-names: Should contain - "gio", "link" - for Pro4 and Pro5 SoCs - "link" - for others -- resets: A list of phandles to the reset control for the glue layer. - According to the reset-names, appropriate resets are required. -- reset-names: Should contain - "gio", "link" - for Pro4 and Pro5 SoCs - "link" - for others - -Example: - - usb-glue@65b00000 { - compatible = "socionext,uniphier-ld20-dwc3-glue", - "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x65b00000 0x400>; - - usb_rst: reset@0 { - compatible = "socionext,uniphier-ld20-usb3-reset"; - reg = <0x0 0x4>; - #reset-cells = <1>; - clock-names = "link"; - clocks = <&sys_clk 14>; - reset-names = "link"; - resets = <&sys_rst 14>; - }; - - regulator { - ... - }; - - phy { - ... - }; - ... - }; |