diff options
Diffstat (limited to 'Documentation/devicetree/bindings/spi')
11 files changed, 98 insertions, 71 deletions
diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml index a6f34bdd1d3c..e1ab3f523ad6 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml @@ -46,6 +46,8 @@ properties: patternProperties: "^.*@[0-9a-f]+": type: object + additionalProperties: true + properties: reg: items: diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml index 28b8ace63044..3b47b68b92cb 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml @@ -68,6 +68,8 @@ properties: patternProperties: "^.*@[0-9a-f]+": type: object + additionalProperties: true + properties: reg: items: diff --git a/Documentation/devicetree/bindings/spi/arm,pl022-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/arm,pl022-peripheral-props.yaml new file mode 100644 index 000000000000..bb8b6863b109 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/arm,pl022-peripheral-props.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/arm,pl022-peripheral-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Peripheral-specific properties for Arm PL022 SPI controller + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +select: false + +properties: + pl022,interface: + description: SPI interface type + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # SPI + - 1 # Texas Instruments Synchronous Serial Frame Format + - 2 # Microwire (Half Duplex) + + pl022,com-mode: + description: Specifies the transfer mode + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # interrupt mode + - 1 # polling mode + - 2 # DMA mode + default: 1 + + pl022,rx-level-trig: + description: Rx FIFO watermark level + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 4 + + pl022,tx-level-trig: + description: Tx FIFO watermark level + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 4 + + pl022,ctrl-len: + description: Microwire interface - Control length + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x03 + maximum: 0x1f + + pl022,wait-state: + description: Microwire interface - Wait state + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + pl022,duplex: + description: Microwire interface - Full/Half duplex + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + +additionalProperties: true +... diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml index 9ae1611175f2..48e97e240265 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml @@ -50,6 +50,7 @@ properties: patternProperties: "@[0-9a-f]+$": type: object + additionalProperties: true properties: spi-rx-bus-width: diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml index 93f14dd01afc..88be13268962 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml @@ -44,9 +44,17 @@ properties: - const: tx - const: rx + interconnects: + maxItems: 1 + interrupts: maxItems: 1 + operating-points-v2: true + + power-domains: + maxItems: 1 + reg: maxItems: 1 @@ -62,7 +70,9 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/clock/qcom,gcc-msm8996.h> + #include <dt-bindings/interconnect/qcom,msm8996.h> #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> spi@7575000 { compatible = "qcom,spi-qup-v2.2.1"; @@ -76,6 +86,9 @@ examples: pinctrl-1 = <&blsp1_spi1_sleep>; dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; dma-names = "tx", "rx"; + power-domains = <&rpmpd MSM8996_VDDCX>; + operating-points-v2 = <&spi_opp_table>; + interconnects = <&pnoc MASTER_BLSP_1 &bimc SLAVE_EBI_CH0>; #address-cells = <1>; #size-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml b/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml index e59183e53690..bed829837df1 100644 --- a/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml @@ -39,6 +39,12 @@ properties: power-domains: maxItems: 1 + renesas,csi-no-ss: + type: boolean + description: + The CSI Slave Selection (SS) pin won't be used to enable transmission and + reception. Only available when in target mode. + required: - compatible - reg @@ -50,6 +56,9 @@ required: - '#address-cells' - '#size-cells' +dependencies: + renesas,csi-no-ss: [ spi-slave ] + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml index 339fb39529f3..ac1503de0478 100644 --- a/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml +++ b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml @@ -47,6 +47,8 @@ properties: patternProperties: "^flash@[0-3]$": type: object + additionalProperties: true + properties: reg: minimum: 0 diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index a47cb144b09f..6348a387a21c 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -160,6 +160,8 @@ properties: patternProperties: "^.*@[0-9a-f]+$": type: object + additionalProperties: true + properties: reg: minimum: 0 diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index 782a014b63a7..15938f81fdce 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -113,8 +113,14 @@ properties: minItems: 2 maxItems: 4 + st,spi-midi-ns: + description: | + Only for STM32H7, (Master Inter-Data Idleness) minimum time + delay in nanoseconds inserted between two consecutive data frames. + # The controller specific properties go here. allOf: + - $ref: arm,pl022-peripheral-props.yaml# - $ref: cdns,qspi-nor-peripheral-props.yaml# - $ref: samsung,spi-peripheral-props.yaml# - $ref: nvidia,tegra210-quad-peripheral-props.yaml# diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml index 5e5a704a766e..7f174b7d0a26 100644 --- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml +++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml @@ -74,57 +74,6 @@ properties: resets: maxItems: 1 -patternProperties: - "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$": - type: object - # SPI slave nodes must be children of the SPI master node and can - # contain the following properties. - properties: - pl022,interface: - description: SPI interface type - $ref: /schemas/types.yaml#/definitions/uint32 - enum: - - 0 # SPI - - 1 # Texas Instruments Synchronous Serial Frame Format - - 2 # Microwire (Half Duplex) - - pl022,com-mode: - description: Specifies the transfer mode - $ref: /schemas/types.yaml#/definitions/uint32 - enum: - - 0 # interrupt mode - - 1 # polling mode - - 2 # DMA mode - default: 1 - - pl022,rx-level-trig: - description: Rx FIFO watermark level - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 4 - - pl022,tx-level-trig: - description: Tx FIFO watermark level - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 4 - - pl022,ctrl-len: - description: Microwire interface - Control length - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0x03 - maximum: 0x1f - - pl022,wait-state: - description: Microwire interface - Wait state - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1] - - pl022,duplex: - description: Microwire interface - Full/Half duplex - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1] - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml index 9ca1a843c820..ae0f082bd377 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml @@ -18,15 +18,6 @@ maintainers: allOf: - $ref: spi-controller.yaml# - - if: - properties: - compatible: - contains: - const: st,stm32f4-spi - - then: - properties: - st,spi-midi-ns: false properties: compatible: @@ -59,17 +50,6 @@ properties: - const: rx - const: tx -patternProperties: - "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$": - type: object - # SPI slave nodes must be children of the SPI master node and can - # contain the following properties. - properties: - st,spi-midi-ns: - description: | - Only for STM32H7, (Master Inter-Data Idleness) minimum time - delay in nanoseconds inserted between two consecutive data frames. - required: - compatible - reg |