diff options
Diffstat (limited to 'Documentation/devicetree/bindings/spi')
14 files changed, 412 insertions, 169 deletions
diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm63xx-spi.yaml b/Documentation/devicetree/bindings/spi/brcm,bcm63xx-spi.yaml new file mode 100644 index 000000000000..fa03cdd68e70 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/brcm,bcm63xx-spi.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/brcm,bcm63xx-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6348/BCM6358 SPI controller + +maintainers: + - Jonas Gorski <jonas.gorski@gmail.com> + +description: | + Broadcom "Low Speed" SPI controller found in many older MIPS based Broadband + SoCs. + + This controller has a limitation that can not keep the chip select line active + between the SPI transfers within the same SPI message. This can terminate the + transaction to some SPI devices prematurely. The issue can be worked around by + the controller's prepend mode. + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - brcm,bcm6368-spi + - brcm,bcm6362-spi + - brcm,bcm63268-spi + - const: brcm,bcm6358-spi + - enum: + - brcm,bcm6348-spi + - brcm,bcm6358-spi + + reg: + maxItems: 1 + + clocks: + items: + - description: SPI master reference clock + + clock-names: + items: + - const: spi + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +unevaluatedProperties: false + +examples: + - | + spi@10000800 { + compatible = "brcm,bcm6368-spi", "brcm,bcm6358-spi"; + reg = <0x10000800 0x70c>; + interrupts = <1>; + clocks = <&clkctl 9>; + clock-names = "spi"; + num-cs = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml index 4f15f9a0cc34..cca81f89e252 100644 --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml @@ -86,7 +86,17 @@ properties: maxItems: 1 clocks: - maxItems: 1 + minItems: 1 + maxItems: 3 + + clock-names: + oneOf: + - items: + - const: ref + - items: + - const: ref + - const: ahb + - const: apb cdns,fifo-depth: description: diff --git a/Documentation/devicetree/bindings/spi/loongson,ls2k-spi.yaml b/Documentation/devicetree/bindings/spi/loongson,ls2k-spi.yaml new file mode 100644 index 000000000000..de9d32feadf5 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/loongson,ls2k-spi.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/loongson,ls2k-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson SPI controller + +maintainers: + - Yinbo Zhu <zhuyinbo@loongson.cn> + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + oneOf: + - enum: + - loongson,ls2k1000-spi + - items: + - enum: + - loongson,ls2k0500-spi + - const: loongson,ls2k1000-spi + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + spi0: spi@1fff0220{ + compatible = "loongson,ls2k1000-spi"; + reg = <0x1fff0220 0x10>; + clocks = <&clk 17>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt deleted file mode 100644 index db8e0d71c5bc..000000000000 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt +++ /dev/null @@ -1,61 +0,0 @@ -NVIDIA Tegra114 SPI controller. - -Required properties: -- compatible : For Tegra114, must contain "nvidia,tegra114-spi". - Otherwise, must contain '"nvidia,<chip>-spi", "nvidia,tegra114-spi"' where - <chip> is tegra124, tegra132, or tegra210. -- reg: Should contain SPI registers location and length. -- interrupts: Should contain SPI interrupts. -- clock-names : Must include the following entries: - - spi -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - spi -- dmas : Must contain an entry for each entry in clock-names. - See ../dma/dma.txt for details. -- dma-names : Must include the following entries: - - rx - - tx -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. - -Recommended properties: -- spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt -Optional properties: -- nvidia,tx-clk-tap-delay: Delays the clock going out to the external device - with this tap value. This property is used to tune the outgoing data from - Tegra SPI master with respect to outgoing Tegra SPI master clock. - Tap values vary based on the platform design trace lengths from Tegra SPI - to corresponding slave devices. Valid tap values are from 0 thru 63. -- nvidia,rx-clk-tap-delay: Delays the clock coming in from the external device - with this tap value. This property is used to adjust the Tegra SPI master - clock with respect to the data from the SPI slave device. - Tap values vary based on the platform design trace lengths from Tegra SPI - to corresponding slave devices. Valid tap values are from 0 thru 63. - -Example: - -spi@7000d600 { - compatible = "nvidia,tegra114-spi"; - reg = <0x7000d600 0x200>; - interrupts = <0 82 0x04>; - spi-max-frequency = <25000000>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 44>; - clock-names = "spi"; - resets = <&tegra_car 44>; - reset-names = "spi"; - dmas = <&apbdma 16>, <&apbdma 16>; - dma-names = "rx", "tx"; - <spi-client>@<bus_num> { - ... - ... - nvidia,rx-clk-tap-delay = <0>; - nvidia,tx-clk-tap-delay = <16>; - ... - }; - -}; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.yaml new file mode 100644 index 000000000000..58222ffa53d7 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/nvidia,tegra114-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra114 SPI controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + oneOf: + - const: nvidia,tegra114-spi + - items: + - enum: + - nvidia,tegra210-spi + - nvidia,tegra124-spi + - const: nvidia,tegra114-spi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: SPI module clock + + clock-names: + items: + - const: spi + + resets: + items: + - description: SPI module reset + + reset-names: + items: + - const: spi + + dmas: + items: + - description: DMA channel for the reception FIFO + - description: DMA channel for the transmission FIFO + + dma-names: + items: + - const: rx + - const: tx + + spi-max-frequency: + description: Maximum SPI clocking speed of the controller in Hz. + $ref: /schemas/types.yaml#/definitions/uint32 + +allOf: + - $ref: spi-controller.yaml + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + - dmas + - dma-names + +examples: + - | + spi@7000d600 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000d600 0x200>; + interrupts = <0 82 0x04>; + clocks = <&tegra_car 44>; + clock-names = "spi"; + resets = <&tegra_car 44>; + reset-names = "spi"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; + + spi-max-frequency = <25000000>; + + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + nvidia,rx-clk-tap-delay = <0>; + nvidia,tx-clk-tap-delay = <16>; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt deleted file mode 100644 index c212491929b5..000000000000 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt +++ /dev/null @@ -1,37 +0,0 @@ -NVIDIA Tegra20 SFLASH controller. - -Required properties: -- compatible : should be "nvidia,tegra20-sflash". -- reg: Should contain SFLASH registers location and length. -- interrupts: Should contain SFLASH interrupts. -- clocks : Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - spi -- dmas : Must contain an entry for each entry in clock-names. - See ../dma/dma.txt for details. -- dma-names : Must include the following entries: - - rx - - tx - -Recommended properties: -- spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: - -spi@7000c380 { - compatible = "nvidia,tegra20-sflash"; - reg = <0x7000c380 0x80>; - interrupts = <0 39 0x04>; - spi-max-frequency = <25000000>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 43>; - resets = <&tegra_car 43>; - reset-names = "spi"; - dmas = <&apbdma 11>, <&apbdma 11>; - dma-names = "rx", "tx"; -}; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.yaml new file mode 100644 index 000000000000..e245bad85a25 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/nvidia,tegra20-sflash.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra20 SFLASH controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,tegra20-sflash + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: module clock + + resets: + items: + - description: module reset + + reset-names: + items: + - const: spi + + dmas: + items: + - description: DMA channel used for reception + - description: DMA channel used for transmission + + dma-names: + items: + - const: rx + - const: tx + + spi-max-frequency: + description: Maximum SPI clocking speed of the controller in Hz. + $ref: /schemas/types.yaml#/definitions/uint32 + +allOf: + - $ref: spi-controller.yaml + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - resets + - reset-names + - dmas + - dma-names + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spi@7000c380 { + compatible = "nvidia,tegra20-sflash"; + reg = <0x7000c380 0x80>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <25000000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA20_CLK_SPI>; + resets = <&tegra_car 43>; + reset-names = "spi"; + dmas = <&apbdma 11>, <&apbdma 11>; + dma-names = "rx", "tx"; + }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt deleted file mode 100644 index 40d80b93e327..000000000000 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt +++ /dev/null @@ -1,37 +0,0 @@ -NVIDIA Tegra20/Tegra30 SLINK controller. - -Required properties: -- compatible : should be "nvidia,tegra20-slink", "nvidia,tegra30-slink". -- reg: Should contain SLINK registers location and length. -- interrupts: Should contain SLINK interrupts. -- clocks : Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - spi -- dmas : Must contain an entry for each entry in clock-names. - See ../dma/dma.txt for details. -- dma-names : Must include the following entries: - - rx - - tx - -Recommended properties: -- spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: - -spi@7000d600 { - compatible = "nvidia,tegra20-slink"; - reg = <0x7000d600 0x200>; - interrupts = <0 82 0x04>; - spi-max-frequency = <25000000>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 44>; - resets = <&tegra_car 44>; - reset-names = "spi"; - dmas = <&apbdma 16>, <&apbdma 16>; - dma-names = "rx", "tx"; -}; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.yaml new file mode 100644 index 000000000000..291c25ec015d --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/nvidia,tegra20-slink.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra20/30 SLINK controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + enum: + - nvidia,tegra20-slink + - nvidia,tegra30-slink + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: module clock + + resets: + items: + - description: module reset + + reset-names: + items: + - const: spi + + dmas: + items: + - description: DMA channel used for reception + - description: DMA channel used for transmission + + dma-names: + items: + - const: rx + - const: tx + + operating-points-v2: + $ref: /schemas/types.yaml#/definitions/phandle + + power-domains: + items: + - description: phandle to the core power domain + + spi-max-frequency: + description: Maximum SPI clocking speed of the controller in Hz. + $ref: /schemas/types.yaml#/definitions/uint32 + +allOf: + - $ref: spi-controller.yaml + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - resets + - reset-names + - dmas + - dma-names + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spi@7000d600 { + compatible = "nvidia,tegra20-slink"; + reg = <0x7000d600 0x200>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <25000000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA20_CLK_SBC2>; + resets = <&tegra_car 44>; + reset-names = "spi"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-bcm63xx.txt b/Documentation/devicetree/bindings/spi/spi-bcm63xx.txt deleted file mode 100644 index 1c16f6692613..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-bcm63xx.txt +++ /dev/null @@ -1,33 +0,0 @@ -Binding for Broadcom BCM6348/BCM6358 SPI controller - -Required properties: -- compatible: must contain one of "brcm,bcm6348-spi", "brcm,bcm6358-spi". -- reg: Base address and size of the controllers memory area. -- interrupts: Interrupt for the SPI block. -- clocks: phandle of the SPI clock. -- clock-names: has to be "spi". -- #address-cells: <1>, as required by generic SPI binding. -- #size-cells: <0>, also as required by generic SPI binding. - -Optional properties: -- num-cs: some controllers have less than 8 cs signals. Defaults to 8 - if absent. - -Child nodes as per the generic SPI binding. - -Example: - - spi@10000800 { - compatible = "brcm,bcm6368-spi", "brcm,bcm6358-spi"; - reg = <0x10000800 0x70c>; - - interrupts = <1>; - - clocks = <&clkctl 9>; - clock-names = "spi"; - - num-cs = <5>; - - #address-cells = <1>; - #size-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml index b7552739b554..d4b61b0e8301 100644 --- a/Documentation/devicetree/bindings/spi/spi-cadence.yaml +++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml @@ -49,6 +49,12 @@ properties: enum: [ 0, 1 ] default: 0 + power-domains: + maxItems: 1 + + label: + description: Descriptive name of the SPI controller. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml index e91425012319..727c5346b8ce 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml @@ -63,6 +63,9 @@ properties: maximum: 2 default: 1 + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml index a813c971ecf6..7fd591145480 100644 --- a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml @@ -45,6 +45,9 @@ properties: - const: fspi_en - const: fspi + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml index 91e540a92faf..5e5a704a766e 100644 --- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml +++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: spi-controller.yaml# + - $ref: /schemas/arm/primecell.yaml# # We need a select here so we don't match all nodes with 'arm,primecell' select: |