diff options
Diffstat (limited to 'Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml | 19 |
1 files changed, 16 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml index 782402800d4a..1394557517b1 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml @@ -34,6 +34,7 @@ properties: - fsl,imx23-usb - fsl,imx25-usb - fsl,imx28-usb + - fsl,imx35-usb - fsl,imx50-usb - fsl,imx51-usb - fsl,imx53-usb @@ -76,11 +77,11 @@ properties: clocks: minItems: 1 - maxItems: 2 + maxItems: 3 clock-names: minItems: 1 - maxItems: 2 + maxItems: 3 dr_mode: true @@ -167,7 +168,7 @@ properties: at RTL is 0, so this property only affects siTD. If this property is not set, the max packet size is 1023 bytes, and - if the total of packet size for pervious transactions are more than + if the total of packet size for previous transactions are more than 256 bytes, it can't accept any transactions within this frame. The use case is single transaction, but higher frame rate. @@ -292,6 +293,18 @@ properties: minimum: 0x0 maximum: 0xf + fsl,picophy-rise-fall-time-adjust: + description: + HS Transmitter Rise/Fall Time Adjustment. Adjust the rise/fall times + of the high-speed transmitter waveform. It has no unit. The rise/fall + time will be increased or decreased by a certain percentage relative + to design default time. (0:-10%; 1:design default; 2:+15%; 3:+20%) + Details can refer to TXRISETUNE0 bit of USBNC_n_PHY_CFG1. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 1 + usb-phy: description: phandle for the PHY device. Use "phys" instead. $ref: /schemas/types.yaml#/definitions/phandle |