diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
246 files changed, 5790 insertions, 2060 deletions
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 3e886194b043..2323fd5b7cda 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -28,7 +28,7 @@ $(obj)/%.example.dts: $(src)/%.yaml check_dtschema_version FORCE find_all_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \ -name 'processed-schema*' \) -find_cmd = $(find_all_cmd) | grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))" +find_cmd = $(find_all_cmd) | sed 's|^$(srctree)/$(src)/||' | grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))" | sed 's|^|$(srctree)/$(src)/|' CHK_DT_DOCS := $(shell $(find_cmd)) quiet_cmd_yamllint = LINT $(src) diff --git a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml index a9fe01238a88..76b65ea149b6 100644 --- a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml +++ b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml @@ -16,7 +16,7 @@ maintainers: properties: compatible: - const: "calxeda,hb-sregs-l2-ecc" + const: calxeda,hb-sregs-l2-ecc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt deleted file mode 100644 index 606b4b1b709d..000000000000 --- a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt +++ /dev/null @@ -1,84 +0,0 @@ -QCOM Idle States for cpuidle driver - -ARM provides idle-state node to define the cpuidle states, as defined in [1]. -cpuidle-qcom is the cpuidle driver for Qualcomm SoCs and uses these idle -states. Idle states have different enter/exit latency and residency values. -The idle states supported by the QCOM SoC are defined as - - - * Standby - * Retention - * Standalone Power Collapse (Standalone PC or SPC) - * Power Collapse (PC) - -Standby: Standby does a little more in addition to architectural clock gating. -When the WFI instruction is executed the ARM core would gate its internal -clocks. In addition to gating the clocks, QCOM cpus use this instruction as a -trigger to execute the SPM state machine. The SPM state machine waits for the -interrupt to trigger the core back in to active. This triggers the cache -hierarchy to enter standby states, when all cpus are idle. An interrupt brings -the SPM state machine out of its wait, the next step is to ensure that the -cache hierarchy is also out of standby, and then the cpu is allowed to resume -execution. This state is defined as a generic ARM WFI state by the ARM cpuidle -driver and is not defined in the DT. The SPM state machine should be -configured to execute this state by default and after executing every other -state below. - -Retention: Retention is a low power state where the core is clock gated and -the memory and the registers associated with the core are retained. The -voltage may be reduced to the minimum value needed to keep the processor -registers active. The SPM should be configured to execute the retention -sequence and would wait for interrupt, before restoring the cpu to execution -state. Retention may have a slightly higher latency than Standby. - -Standalone PC: A cpu can power down and warmboot if there is a sufficient time -between the time it enters idle and the next known wake up. SPC mode is used -to indicate a core entering a power down state without consulting any other -cpu or the system resources. This helps save power only on that core. The SPM -sequence for this idle state is programmed to power down the supply to the -core, wait for the interrupt, restore power to the core, and ensure the -system state including cache hierarchy is ready before allowing core to -resume. Applying power and resetting the core causes the core to warmboot -back into Elevation Level (EL) which trampolines the control back to the -kernel. Entering a power down state for the cpu, needs to be done by trapping -into a EL. Failing to do so, would result in a crash enforced by the warm boot -code in the EL for the SoC. On SoCs with write-back L1 cache, the cache has to -be flushed in s/w, before powering down the core. - -Power Collapse: This state is similar to the SPC mode, but distinguishes -itself in that the cpu acknowledges and permits the SoC to enter deeper sleep -modes. In a hierarchical power domain SoC, this means L2 and other caches can -be flushed, system bus, clocks - lowered, and SoC main XO clock gated and -voltages reduced, provided all cpus enter this state. Since the span of low -power modes possible at this state is vast, the exit latency and the residency -of this low power mode would be considered high even though at a cpu level, -this essentially is cpu power down. The SPM in this state also may handshake -with the Resource power manager (RPM) processor in the SoC to indicate a -complete application processor subsystem shut down. - -The idle-state for QCOM SoCs are distinguished by the compatible property of -the idle-states device node. - -The devicetree representation of the idle state should be - - -Required properties: - -- compatible: Must be one of - - "qcom,idle-state-ret", - "qcom,idle-state-spc", - "qcom,idle-state-pc", - and "arm,idle-state". - -Other required and optional properties are specified in [1]. - -Example: - - idle-states { - CPU_SPC: spc { - compatible = "qcom,idle-state-spc", "arm,idle-state"; - entry-latency-us = <150>; - exit-latency-us = <200>; - min-residency-us = <2000>; - }; - }; - -[1]. Documentation/devicetree/bindings/cpu/idle-states.yaml diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-remote-etm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-remote-etm.yaml new file mode 100644 index 000000000000..4fd5752978cd --- /dev/null +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-remote-etm.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/qcom,coresight-remote-etm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Coresight Remote ETM(Embedded Trace Macrocell) + +maintainers: + - Jinlong Mao <quic_jinlmao@quicinc.com> + - Tao Zhang <quic_taozha@quicinc.com> + +description: + Support for ETM trace collection on remote processor using coresight + framework. Enabling this will allow turning on ETM tracing on remote + processor like modem processor via sysfs and collecting the trace + via coresight TMC sinks. + +properties: + compatible: + const: qcom,coresight-remote-etm + + out-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: Output connection to the CoreSight Trace bus. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - out-ports + +additionalProperties: false + +examples: + - | + etm { + compatible = "qcom,coresight-remote-etm"; + + out-ports { + port { + modem_etm0_out_funnel_modem: endpoint { + remote-endpoint = <&funnel_modem_in_modem_etm0>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml index 3bad47b7b02b..61ddc3b5b247 100644 --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml @@ -44,6 +44,23 @@ properties: minItems: 1 maxItems: 2 + qcom,dsb-element-size: + description: + Specifies the DSB(Discrete Single Bit) element size supported by + the monitor. The associated aggregator will read this size before it + is enabled. DSB element size currently only supports 32-bit and 64-bit. + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [32, 64] + + qcom,dsb-msrs-num: + description: + Specifies the number of DSB(Discrete Single Bit) MSR(mux select register) + registers supported by the monitor. If this property is not configured + or set to 0, it means this DSB TPDM doesn't support MSR. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 32 + clocks: maxItems: 1 @@ -77,6 +94,9 @@ examples: compatible = "qcom,coresight-tpdm", "arm,primecell"; reg = <0x0684c000 0x1000>; + qcom,dsb-element-size = /bits/ 8 <32>; + qcom,dsb-msrs-num = <16>; + clocks = <&aoss_qmp>; clock-names = "apb_pclk"; diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml index fde07e4b119d..406a922a714e 100644 --- a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml +++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml @@ -113,7 +113,7 @@ examples: hd44780 { compatible = "hit,hd44780"; display-height-chars = <2>; - display-width-chars = <16>; + display-width-chars = <16>; data-gpios = <&pcf8574 4 0>, <&pcf8574 5 0>, <&pcf8574 6 0>, diff --git a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml index b9a9f2cf32a1..07ccbda4a0ab 100644 --- a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml +++ b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml @@ -66,6 +66,7 @@ allOf: compatible: contains: enum: + - qcom,qdu1000-llcc - qcom,sc7180-llcc - qcom,sm6350-llcc then: @@ -103,7 +104,6 @@ allOf: compatible: contains: enum: - - qcom,qdu1000-llcc - qcom,sc8180x-llcc - qcom,sc8280xp-llcc - qcom,x1e80100-llcc diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml index 624984d51c10..7f8d98226437 100644 --- a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml +++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml @@ -125,7 +125,7 @@ examples: clk25m: clock-oscillator-25m { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <25000000>; + clock-frequency = <25000000>; clock-output-names = "clk25m"; }; ... diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 7c8a3e8430d3..fb216ce68bb3 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -66,7 +66,6 @@ properties: Particularly, if use an output GPIO to control a VBUS regulator, should model it as a regulator. See bindings/regulator/fixed-regulator.yaml - # The following are optional properties for "usb-c-connector". power-role: description: Determines the power role that the Type C connector will support. "dual" refers to Dual Role Port (DRP). @@ -119,30 +118,6 @@ properties: # The following are optional properties for "usb-c-connector" with power # delivery support. - source-pdos: - description: An array of u32 with each entry providing supported power - source data object(PDO), the detailed bit definitions of PDO can be found - in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2 - Source_Capabilities Message, the order of each entry(PDO) should follow - the PD spec chapter 6.4.1. Required for power source and power dual role. - User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() - defined in dt-bindings/usb/pd.h. - minItems: 1 - maxItems: 7 - $ref: /schemas/types.yaml#/definitions/uint32-array - - sink-pdos: - description: An array of u32 with each entry providing supported power sink - data object(PDO), the detailed bit definitions of PDO can be found in - "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3 - Sink Capabilities Message, the order of each entry(PDO) should follow the - PD spec chapter 6.4.1. Required for power sink and power dual role. User - can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined - in dt-bindings/usb/pd.h. - minItems: 1 - maxItems: 7 - $ref: /schemas/types.yaml#/definitions/uint32-array - sink-vdos: description: An array of u32 with each entry, a Vendor Defined Message Object (VDO), providing additional information corresponding to the product, the detailed bit @@ -166,10 +141,43 @@ properties: maxItems: 6 $ref: /schemas/types.yaml#/definitions/uint32-array - op-sink-microwatt: - description: Sink required operating power in microwatt, if source can't - offer the power, Capability Mismatch is set. Required for power sink and - power dual role. + accessory-mode-audio: + type: boolean + description: Whether the device supports Audio Adapter Accessory Mode. This + is only necessary if there are no other means to discover supported + alternative modes (e.g. through the UCSI firmware interface). + + accessory-mode-debug: + type: boolean + description: Whether the device supports Debug Accessory Mode. This + is only necessary if there are no other means to discover supported + alternative modes (e.g. through the UCSI firmware interface). + + altmodes: + type: object + description: List of Alternative Modes supported by the schematics on the + particular device. This is only necessary if there are no other means to + discover supported alternative modes (e.g. through the UCSI firmware + interface). + + additionalProperties: false + + patternProperties: + "^(displayport)$": + type: object + description: + A single USB-C Alternative Mode as supported by the USB-C connector logic. + + additionalProperties: false + + properties: + svid: + $ref: /schemas/types.yaml#/definitions/uint16 + description: Unique value assigned by USB-IF to the Vendor / AltMode. + enum: [ 0xff01 ] + vdo: + $ref: /schemas/types.yaml#/definitions/uint32 + description: VDO returned by Discover Modes USB PD command. port: $ref: /schemas/graph.yaml#/properties/port @@ -231,6 +239,20 @@ properties: SNK_READY for non-pd link. type: boolean + capabilities: + description: A child node to contain all the selectable USB Power Delivery capabilities. + type: object + + patternProperties: + "^caps-[0-9]+$": + description: Child nodes under "capabilities" node. Each node contains a selectable USB + Power Delivery capability. + type: object + $ref: "#/$defs/capabilities" + unevaluatedProperties: false + + additionalProperties: false + dependencies: sink-vdos-v1: [ sink-vdos ] sink-vdos: [ sink-vdos-v1 ] @@ -238,7 +260,42 @@ dependencies: required: - compatible +$defs: + capabilities: + type: object + + properties: + source-pdos: + description: An array of u32 with each entry providing supported power + source data object(PDO), the detailed bit definitions of PDO can be found + in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2 + Source_Capabilities Message, the order of each entry(PDO) should follow + the PD spec chapter 6.4.1. Required for power source and power dual role. + User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() + defined in dt-bindings/usb/pd.h. + minItems: 1 + maxItems: 7 + $ref: /schemas/types.yaml#/definitions/uint32-array + + sink-pdos: + description: An array of u32 with each entry providing supported power sink + data object(PDO), the detailed bit definitions of PDO can be found in + "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3 + Sink Capabilities Message, the order of each entry(PDO) should follow the + PD spec chapter 6.4.1. Required for power sink and power dual role. User + can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined + in dt-bindings/usb/pd.h. + minItems: 1 + maxItems: 7 + $ref: /schemas/types.yaml#/definitions/uint32-array + + op-sink-microwatt: + description: Sink required operating power in microwatt, if source can't + offer the power, Capability Mismatch is set. Required for power sink and + power dual role. + allOf: + - $ref: "#/$defs/capabilities" - if: properties: compatible: @@ -267,7 +324,7 @@ anyOf: - typec-power-opmode - new-source-frs-typec-current -additionalProperties: false +unevaluatedProperties: false examples: # Micro-USB connector with HS lines routed via controller (MUIC). @@ -289,6 +346,13 @@ examples: compatible = "usb-c-connector"; label = "USB-C"; + altmodes { + displayport { + svid = /bits/ 16 <0xff01>; + vdo = <0x00001c46>; + }; + }; + ports { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/cpu/idle-states.yaml b/Documentation/devicetree/bindings/cpu/idle-states.yaml index b3a5356f9916..239480ef7c30 100644 --- a/Documentation/devicetree/bindings/cpu/idle-states.yaml +++ b/Documentation/devicetree/bindings/cpu/idle-states.yaml @@ -243,7 +243,64 @@ description: |+ just supports idle_standby, an idle-states node is not required. =========================================== - 6 - References + 6 - Qualcomm specific STATES + =========================================== + + Idle states have different enter/exit latency and residency values. + The idle states supported by the QCOM SoC are defined as - + + * Standby + * Retention + * Standalone Power Collapse (Standalone PC or SPC) + * Power Collapse (PC) + + Standby: Standby does a little more in addition to architectural clock gating. + When the WFI instruction is executed the ARM core would gate its internal + clocks. In addition to gating the clocks, QCOM cpus use this instruction as a + trigger to execute the SPM state machine. The SPM state machine waits for the + interrupt to trigger the core back in to active. This triggers the cache + hierarchy to enter standby states, when all cpus are idle. An interrupt brings + the SPM state machine out of its wait, the next step is to ensure that the + cache hierarchy is also out of standby, and then the cpu is allowed to resume + execution. This state is defined as a generic ARM WFI state by the ARM cpuidle + driver and is not defined in the DT. The SPM state machine should be + configured to execute this state by default and after executing every other + state below. + + Retention: Retention is a low power state where the core is clock gated and + the memory and the registers associated with the core are retained. The + voltage may be reduced to the minimum value needed to keep the processor + registers active. The SPM should be configured to execute the retention + sequence and would wait for interrupt, before restoring the cpu to execution + state. Retention may have a slightly higher latency than Standby. + + Standalone PC: A cpu can power down and warmboot if there is a sufficient time + between the time it enters idle and the next known wake up. SPC mode is used + to indicate a core entering a power down state without consulting any other + cpu or the system resources. This helps save power only on that core. The SPM + sequence for this idle state is programmed to power down the supply to the + core, wait for the interrupt, restore power to the core, and ensure the + system state including cache hierarchy is ready before allowing core to + resume. Applying power and resetting the core causes the core to warmboot + back into Elevation Level (EL) which trampolines the control back to the + kernel. Entering a power down state for the cpu, needs to be done by trapping + into a EL. Failing to do so, would result in a crash enforced by the warm boot + code in the EL for the SoC. On SoCs with write-back L1 cache, the cache has to + be flushed in s/w, before powering down the core. + + Power Collapse: This state is similar to the SPC mode, but distinguishes + itself in that the cpu acknowledges and permits the SoC to enter deeper sleep + modes. In a hierarchical power domain SoC, this means L2 and other caches can + be flushed, system bus, clocks - lowered, and SoC main XO clock gated and + voltages reduced, provided all cpus enter this state. Since the span of low + power modes possible at this state is vast, the exit latency and the residency + of this low power mode would be considered high even though at a cpu level, + this essentially is cpu power down. The SPM in this state also may handshake + with the Resource power manager (RPM) processor in the SoC to indicate a + complete application processor subsystem shut down. + + =========================================== + 7 - References =========================================== [1] ARM Linux Kernel documentation - CPUs bindings @@ -301,9 +358,16 @@ patternProperties: properties: compatible: - enum: - - arm,idle-state - - riscv,idle-state + oneOf: + - items: + - enum: + - qcom,idle-state-ret + - qcom,idle-state-spc + - qcom,idle-state-pc + - const: arm,idle-state + - enum: + - arm,idle-state + - riscv,idle-state arm,psci-suspend-param: $ref: /schemas/types.yaml#/definitions/uint32 @@ -852,4 +916,13 @@ examples: }; }; + // Example 4 - Qualcomm SPC + idle-states { + cpu_spc: cpu-spc { + compatible = "qcom,idle-state-spc", "arm,idle-state"; + entry-latency-us = <150>; + exit-latency-us = <200>; + min-residency-us = <2000>; + }; + }; ... diff --git a/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml b/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml new file mode 100644 index 000000000000..e5617d125567 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/synaptics,r63353.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synaptics R63353 based MIPI-DSI panels + +maintainers: + - Michael Trimarchi <michael@amarulasolutions.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - sharp,ls068b3sx02 + - const: syna,r63353 + + avdd-supply: true + dvdd-supply: true + reg: true + +required: + - compatible + - avdd-supply + - dvdd-supply + - reg + - reset-gpios + - port + - backlight + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sharp,ls068b3sx02", "syna,r63353"; + reg = <0>; + avdd-supply = <&avdd_display>; + dvdd-supply = <&dvdd_display>; + reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */ + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt deleted file mode 100644 index cec21714f0e0..000000000000 --- a/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt +++ /dev/null @@ -1,49 +0,0 @@ -Rockchip specific extensions to the Innosilicon HDMI -================================ - -Required properties: -- compatible: - "rockchip,rk3036-inno-hdmi"; -- reg: - Physical base address and length of the controller's registers. -- clocks, clock-names: - Phandle to hdmi controller clock, name should be "pclk" -- interrupts: - HDMI interrupt number -- ports: - Contain one port node with endpoint definitions as defined in - Documentation/devicetree/bindings/graph.txt. -- pinctrl-0, pinctrl-name: - Switch the iomux of HPD/CEC pins to HDMI function. - -Example: -hdmi: hdmi@20034000 { - compatible = "rockchip,rk3036-inno-hdmi"; - reg = <0x20034000 0x4000>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_HDMI>; - clock-names = "pclk"; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_ctl>; - - hdmi_in: port { - #address-cells = <1>; - #size-cells = <0>; - hdmi_in_lcdc: endpoint@0 { - reg = <0>; - remote-endpoint = <&lcdc_out_hdmi>; - }; - }; -}; - -&pinctrl { - hdmi { - hdmi_ctl: hdmi-ctl { - rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>, - <1 9 RK_FUNC_1 &pcfg_pull_none>, - <1 10 RK_FUNC_1 &pcfg_pull_none>, - <1 11 RK_FUNC_1 &pcfg_pull_none>; - }; - }; - -}; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml new file mode 100644 index 000000000000..be78dcfa1c76 --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip,inno-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip Innosilicon HDMI controller + +maintainers: + - Sandy Huang <hjc@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,rk3036-inno-hdmi + - rockchip,rk3128-inno-hdmi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: The HDMI controller main clock + - description: The HDMI PHY reference clock + + clock-names: + minItems: 1 + items: + - const: pclk + - const: ref + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with one endpoint connected to a vop node. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with one endpoint connected to a hdmi-connector node. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - pinctrl-0 + - pinctrl-names + - ports + +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,rk3036-inno-hdmi + + then: + properties: + power-domains: false + + - if: + properties: + compatible: + contains: + const: rockchip,rk3128-inno-hdmi + + then: + properties: + clocks: + minItems: 2 + clock-names: + minItems: 2 + required: + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3036-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/rockchip.h> + hdmi: hdmi@20034000 { + compatible = "rockchip,rk3036-inno-hdmi"; + reg = <0x20034000 0x4000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMI>; + clock-names = "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_ctl>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + hdmi_in_vop: endpoint { + remote-endpoint = <&vop_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + }; + }; + + pinctrl { + hdmi { + hdmi_ctl: hdmi-ctl { + rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>, + <1 RK_PB1 1 &pcfg_pull_none>, + <1 RK_PB2 1 &pcfg_pull_none>, + <1 RK_PB3 1 &pcfg_pull_none>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml index 25d53fde92e1..597c9cc6a312 100644 --- a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml +++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml @@ -85,7 +85,7 @@ allOf: clocks: minItems: 6 maxItems: 6 - regs: + reg: minItems: 2 maxItems: 2 @@ -99,7 +99,7 @@ allOf: clocks: minItems: 4 maxItems: 4 - regs: + reg: minItems: 2 maxItems: 2 @@ -116,7 +116,7 @@ allOf: clocks: minItems: 3 maxItems: 3 - regs: + reg: minItems: 1 maxItems: 1 diff --git a/Documentation/devicetree/bindings/dma/dma-controller.yaml b/Documentation/devicetree/bindings/dma/dma-controller.yaml index 04d150d4d15d..e6afca558c2d 100644 --- a/Documentation/devicetree/bindings/dma/dma-controller.yaml +++ b/Documentation/devicetree/bindings/dma/dma-controller.yaml @@ -19,19 +19,4 @@ properties: additionalProperties: true -examples: - - | - dma: dma-controller@48000000 { - compatible = "ti,omap-sdma"; - reg = <0x48000000 0x1000>; - interrupts = <0 12 0x4>, - <0 13 0x4>, - <0 14 0x4>, - <0 15 0x4>; - #dma-cells = <1>; - dma-channels = <32>; - dma-requests = <127>; - dma-channel-mask = <0xfffe>; - }; - ... diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml index 346fe0fa4460..5ad2febc581e 100644 --- a/Documentation/devicetree/bindings/dma/dma-router.yaml +++ b/Documentation/devicetree/bindings/dma/dma-router.yaml @@ -40,15 +40,4 @@ required: additionalProperties: true -examples: - - | - sdma_xbar: dma-router@4a002b78 { - compatible = "ti,dra7-dma-crossbar"; - reg = <0x4a002b78 0xfc>; - #dma-cells = <1>; - dma-requests = <205>; - ti,dma-safe-map = <0>; - dma-masters = <&sdma>; - }; - ... diff --git a/Documentation/devicetree/bindings/dma/loongson,ls2x-apbdma.yaml b/Documentation/devicetree/bindings/dma/loongson,ls2x-apbdma.yaml new file mode 100644 index 000000000000..6a1b49a49a64 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/loongson,ls2x-apbdma.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/loongson,ls2x-apbdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson LS2X APB DMA controller + +description: + The Loongson LS2X APB DMA controller is used for transferring data + between system memory and the peripherals on the APB bus. + +maintainers: + - Binbin Zhou <zhoubinbin@loongson.cn> + +allOf: + - $ref: dma-controller.yaml# + +properties: + compatible: + oneOf: + - const: loongson,ls2k1000-apbdma + - items: + - const: loongson,ls2k0500-apbdma + - const: loongson,ls2k1000-apbdma + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + '#dma-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - '#dma-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/loongson,ls2k-clk.h> + + dma-controller@1fe00c00 { + compatible = "loongson,ls2k1000-apbdma"; + reg = <0x1fe00c00 0x8>; + interrupt-parent = <&liointc1>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LOONGSON2_APB_CLK>; + #dma-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml index 4003dbe94940..877147e95ecc 100644 --- a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml +++ b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml @@ -53,6 +53,9 @@ properties: ADMA_CHn_CTRL register. const: 1 + dma-channel-mask: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml index 88d0de3d1b46..deb64cb9ca3e 100644 --- a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml +++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml @@ -32,6 +32,8 @@ properties: - qcom,sm8350-gpi-dma - qcom,sm8450-gpi-dma - qcom,sm8550-gpi-dma + - qcom,sm8650-gpi-dma + - qcom,x1e80100-gpi-dma - const: qcom,sm6350-gpi-dma - items: - enum: diff --git a/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml index c284abc6784a..a42b6a26a6d3 100644 --- a/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml +++ b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml @@ -16,7 +16,7 @@ properties: compatible: items: - enum: - - renesas,r9a07g043-dmac # RZ/G2UL + - renesas,r9a07g043-dmac # RZ/G2UL and RZ/Five - renesas,r9a07g044-dmac # RZ/G2{L,LC} - renesas,r9a07g054-dmac # RZ/V2L - const: renesas,rz-dmac diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml index a1af0b906365..3b22183a1a37 100644 --- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml @@ -29,6 +29,7 @@ properties: compatible: items: - enum: + - microchip,mpfs-pdma - sifive,fu540-c000-pdma - const: sifive,pdma0 description: diff --git a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml index 4ca300a42a99..27b8e1636560 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml @@ -37,11 +37,11 @@ properties: reg: minItems: 3 - maxItems: 5 + maxItems: 9 reg-names: minItems: 3 - maxItems: 5 + maxItems: 9 "#dma-cells": const: 3 @@ -141,7 +141,10 @@ allOf: ti,sci-rm-range-tchan: false reg: - maxItems: 3 + items: + - description: BCDMA Control /Status Registers region + - description: RX Channel Realtime Registers region + - description: Ring Realtime Registers region reg-names: items: @@ -161,14 +164,29 @@ allOf: properties: reg: minItems: 5 + items: + - description: BCDMA Control /Status Registers region + - description: Block Copy Channel Realtime Registers region + - description: RX Channel Realtime Registers region + - description: TX Channel Realtime Registers region + - description: Ring Realtime Registers region + - description: Ring Configuration Registers region + - description: TX Channel Configuration Registers region + - description: RX Channel Configuration Registers region + - description: Block Copy Channel Configuration Registers region reg-names: + minItems: 5 items: - const: gcfg - const: bchanrt - const: rchanrt - const: tchanrt - const: ringrt + - const: ring + - const: tchan + - const: rchan + - const: bchan required: - ti,sci-rm-range-bchan @@ -184,7 +202,11 @@ allOf: ti,sci-rm-range-bchan: false reg: - maxItems: 4 + items: + - description: BCDMA Control /Status Registers region + - description: RX Channel Realtime Registers region + - description: TX Channel Realtime Registers region + - description: Ring Realtime Registers region reg-names: items: @@ -220,8 +242,13 @@ examples: <0x0 0x4c000000 0x0 0x20000>, <0x0 0x4a820000 0x0 0x20000>, <0x0 0x4aa40000 0x0 0x20000>, - <0x0 0x4bc00000 0x0 0x100000>; - reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt"; + <0x0 0x4bc00000 0x0 0x100000>, + <0x0 0x48600000 0x0 0x8000>, + <0x0 0x484a4000 0x0 0x2000>, + <0x0 0x484c2000 0x0 0x2000>, + <0x0 0x48420000 0x0 0x2000>; + reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "bchan"; msi-parent = <&inta_main_dmss>; #dma-cells = <3>; diff --git a/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml index a69f62f854d8..11e064c02994 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml @@ -45,14 +45,28 @@ properties: The second cell is the ASEL value for the channel reg: - maxItems: 4 + minItems: 4 + items: + - description: Packet DMA Control /Status Registers region + - description: RX Channel Realtime Registers region + - description: TX Channel Realtime Registers region + - description: Ring Realtime Registers region + - description: Ring Configuration Registers region + - description: TX Configuration Registers region + - description: RX Configuration Registers region + - description: RX Flow Configuration Registers region reg-names: + minItems: 4 items: - const: gcfg - const: rchanrt - const: tchanrt - const: ringrt + - const: ring + - const: tchan + - const: rchan + - const: rflow msi-parent: true @@ -136,8 +150,14 @@ examples: reg = <0x0 0x485c0000 0x0 0x100>, <0x0 0x4a800000 0x0 0x20000>, <0x0 0x4aa00000 0x0 0x40000>, - <0x0 0x4b800000 0x0 0x400000>; - reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt"; + <0x0 0x4b800000 0x0 0x400000>, + <0x0 0x485e0000 0x0 0x20000>, + <0x0 0x484a0000 0x0 0x4000>, + <0x0 0x484c0000 0x0 0x2000>, + <0x0 0x48430000 0x0 0x4000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "rflow"; + msi-parent = <&inta_main_dmss>; #dma-cells = <2>; diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml index 22f6c5e2f7f4..b18cf2bfdb5b 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml @@ -69,13 +69,24 @@ properties: - ti,j721e-navss-mcu-udmap reg: - maxItems: 3 + minItems: 3 + items: + - description: UDMA-P Control /Status Registers region + - description: RX Channel Realtime Registers region + - description: TX Channel Realtime Registers region + - description: TX Configuration Registers region + - description: RX Configuration Registers region + - description: RX Flow Configuration Registers region reg-names: + minItems: 3 items: - const: gcfg - const: rchanrt - const: tchanrt + - const: tchan + - const: rchan + - const: rflow msi-parent: true @@ -158,8 +169,11 @@ examples: compatible = "ti,am654-navss-main-udmap"; reg = <0x0 0x31150000 0x0 0x100>, <0x0 0x34000000 0x0 0x100000>, - <0x0 0x35000000 0x0 0x100000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x35000000 0x0 0x100000>, + <0x0 0x30b00000 0x0 0x20000>, + <0x0 0x30c00000 0x0 0x8000>, + <0x0 0x30d00000 0x0 0x4000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "tchan", "rchan", "rflow"; #dma-cells = <1>; ti,ringacc = <&ringacc>; diff --git a/Documentation/devicetree/bindings/dts-coding-style.rst b/Documentation/devicetree/bindings/dts-coding-style.rst new file mode 100644 index 000000000000..a9bdd2b59dca --- /dev/null +++ b/Documentation/devicetree/bindings/dts-coding-style.rst @@ -0,0 +1,196 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================================== +Devicetree Sources (DTS) Coding Style +===================================== + +When writing Devicetree Sources (DTS) please observe below guidelines. They +should be considered complementary to any rules expressed already in +the Devicetree Specification and the dtc compiler (including W=1 and W=2 +builds). + +Individual architectures and subarchitectures can define additional rules, +making the coding style stricter. + +Naming and Valid Characters +--------------------------- + +The Devicetree Specification allows a broad range of characters in node +and property names, but this coding style narrows the range down to achieve +better code readability. + +1. Node and property names can use only the following characters: + + * Lowercase characters: [a-z] + * Digits: [0-9] + * Dash: - + +2. Labels can use only the following characters: + + * Lowercase characters: [a-z] + * Digits: [0-9] + * Underscore: _ + +3. Unless a bus defines differently, unit addresses shall use lowercase + hexadecimal digits, without leading zeros (padding). + +4. Hex values in properties, e.g. "reg", shall use lowercase hex. The address + part can be padded with leading zeros. + +Example:: + + gpi_dma2: dma-controller@a00000 { + compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x00a00000 0x0 0x60000>; + } + +Order of Nodes +-------------- + +1. Nodes on any bus, thus using unit addresses for children, shall be + ordered by unit address in ascending order. + Alternatively for some subarchitectures, nodes of the same type can be + grouped together, e.g. all I2C controllers one after another even if this + breaks unit address ordering. + +2. Nodes without unit addresses shall be ordered alpha-numerically by the node + name. For a few node types, they can be ordered by the main property, e.g. + pin configuration states ordered by value of "pins" property. + +3. When extending nodes in the board DTS via &label, the entries shall be + ordered either alpha-numerically or by keeping the order from DTSI, where + the choice depends on the subarchitecture. + +The above-described ordering rules are easy to enforce during review, reduce +chances of conflicts for simultaneous additions of new nodes to a file and help +in navigating through the DTS source. + +Example:: + + /* SoC DTSI */ + + / { + cpus { + /* ... */ + }; + + psci { + /* ... */ + }; + + soc@0 { + dma: dma-controller@10000 { + /* ... */ + }; + + clk: clock-controller@80000 { + /* ... */ + }; + }; + }; + + /* Board DTS - alphabetical order */ + + &clk { + /* ... */ + }; + + &dma { + /* ... */ + }; + + /* Board DTS - alternative order, keep as DTSI */ + + &dma { + /* ... */ + }; + + &clk { + /* ... */ + }; + +Order of Properties in Device Node +---------------------------------- + +The following order of properties in device nodes is preferred: + +1. "compatible" +2. "reg" +3. "ranges" +4. Standard/common properties (defined by common bindings, e.g. without + vendor-prefixes) +5. Vendor-specific properties +6. "status" (if applicable) +7. Child nodes, where each node is preceded with a blank line + +The "status" property is by default "okay", thus it can be omitted. + +The above-described ordering follows this approach: + +1. Most important properties start the node: compatible then bus addressing to + match unit address. +2. Each node will have common properties in similar place. +3. Status is the last information to annotate that device node is or is not + finished (board resources are needed). + +Example:: + + /* SoC DTSI */ + + device_node: device-class@6789abc { + compatible = "vendor,device"; + reg = <0x0 0x06789abc 0x0 0xa123>; + ranges = <0x0 0x0 0x06789abc 0x1000>; + #dma-cells = <1>; + clocks = <&clock_controller 0>, <&clock_controller 1>; + clock-names = "bus", "host"; + vendor,custom-property = <2>; + status = "disabled"; + + child_node: child-class@100 { + reg = <0x100 0x200>; + /* ... */ + }; + }; + + /* Board DTS */ + + &device_node { + vdd-supply = <&board_vreg1>; + status = "okay"; + } + +Indentation +----------- + +1. Use indentation according to Documentation/process/coding-style.rst. +2. Each entry in arrays with multiple cells, e.g. "reg" with two IO addresses, + shall be enclosed in <>. +3. For arrays spanning across lines, it is preferred to align the continued + entries with opening < from the first line. + +Example:: + + thermal-sensor@c271000 { + compatible = "qcom,sm8550-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c271000 0x0 0x1000>, + <0x0 0x0c222000 0x0 0x1000>; + }; + +Organizing DTSI and DTS +----------------------- + +The DTSI and DTS files shall be organized in a way representing the common, +reusable parts of hardware. Typically, this means organizing DTSI and DTS files +into several files: + +1. DTSI with contents of the entire SoC, without nodes for hardware not present + on the SoC. +2. If applicable: DTSI with common or re-usable parts of the hardware, e.g. + entire System-on-Module. +3. DTS representing the board. + +Hardware components that are present on the board shall be placed in the +board DTS, not in the SoC or SoM DTSI. A partial exception is a common +external reference SoC input clock, which could be coded as a fixed-clock in +the SoC DTSI with its frequency provided by each board DTS. diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index b6864d0ee81e..1812ef31d5f1 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -123,6 +123,7 @@ properties: - enum: - onnn,cat24c04 - onnn,cat24c05 + - rohm,br24g04 - const: atmel,24c04 - items: - const: renesas,r1ex24016 diff --git a/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt deleted file mode 100644 index 5dd0ff0f7b4e..000000000000 --- a/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt +++ /dev/null @@ -1,13 +0,0 @@ -Altera FPGA To SDRAM Bridge Driver - -Required properties: -- compatible : Should contain "altr,socfpga-fpga2sdram-bridge" - -See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings. - -Example: - fpga_bridge3: fpga-bridge@ffc25080 { - compatible = "altr,socfpga-fpga2sdram-bridge"; - reg = <0xffc25080 0x4>; - bridge-enable = <0>; - }; diff --git a/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt deleted file mode 100644 index 8b26fbcff3c6..000000000000 --- a/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt +++ /dev/null @@ -1,20 +0,0 @@ -Altera Freeze Bridge Controller Driver - -The Altera Freeze Bridge Controller manages one or more freeze bridges. -The controller can freeze/disable the bridges which prevents signal -changes from passing through the bridge. The controller can also -unfreeze/enable the bridges which allows traffic to pass through the -bridge normally. - -Required properties: -- compatible : Should contain "altr,freeze-bridge-controller" -- regs : base address and size for freeze bridge module - -See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings. - -Example: - freeze-controller@100000450 { - compatible = "altr,freeze-bridge-controller"; - regs = <0x1000 0x10>; - bridge-enable = <0>; - }; diff --git a/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt deleted file mode 100644 index 68cce3945b10..000000000000 --- a/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt +++ /dev/null @@ -1,36 +0,0 @@ -Altera FPGA/HPS Bridge Driver - -Required properties: -- regs : base address and size for AXI bridge module -- compatible : Should contain one of: - "altr,socfpga-lwhps2fpga-bridge", - "altr,socfpga-hps2fpga-bridge", or - "altr,socfpga-fpga2hps-bridge" -- resets : Phandle and reset specifier for this bridge's reset -- clocks : Clocks used by this module. - -See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings. - -Example: - fpga_bridge0: fpga-bridge@ff400000 { - compatible = "altr,socfpga-lwhps2fpga-bridge"; - reg = <0xff400000 0x100000>; - resets = <&rst LWHPS2FPGA_RESET>; - clocks = <&l4_main_clk>; - bridge-enable = <0>; - }; - - fpga_bridge1: fpga-bridge@ff500000 { - compatible = "altr,socfpga-hps2fpga-bridge"; - reg = <0xff500000 0x10000>; - resets = <&rst HPS2FPGA_RESET>; - clocks = <&l4_main_clk>; - bridge-enable = <1>; - }; - - fpga_bridge2: fpga-bridge@ff600000 { - compatible = "altr,socfpga-fpga2hps-bridge"; - reg = <0xff600000 0x100000>; - resets = <&rst FPGA2HPS_RESET>; - clocks = <&l4_main_clk>; - }; diff --git a/Documentation/devicetree/bindings/fpga/altr,freeze-bridge-controller.yaml b/Documentation/devicetree/bindings/fpga/altr,freeze-bridge-controller.yaml new file mode 100644 index 000000000000..fccffeebb256 --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/altr,freeze-bridge-controller.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fpga/altr,freeze-bridge-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera Freeze Bridge Controller + +description: + The Altera Freeze Bridge Controller manages one or more freeze bridges. + The controller can freeze/disable the bridges which prevents signal + changes from passing through the bridge. The controller can also + unfreeze/enable the bridges which allows traffic to pass through the bridge + normally. + +maintainers: + - Xu Yilun <yilun.xu@intel.com> + +allOf: + - $ref: fpga-bridge.yaml# + +properties: + compatible: + const: altr,freeze-bridge-controller + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + fpga-bridge@100000450 { + compatible = "altr,freeze-bridge-controller"; + reg = <0x1000 0x10>; + bridge-enable = <0>; + }; diff --git a/Documentation/devicetree/bindings/fpga/altr,socfpga-fpga2sdram-bridge.yaml b/Documentation/devicetree/bindings/fpga/altr,socfpga-fpga2sdram-bridge.yaml new file mode 100644 index 000000000000..22b58453c5ff --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/altr,socfpga-fpga2sdram-bridge.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fpga/altr,socfpga-fpga2sdram-bridge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera FPGA To SDRAM Bridge + +maintainers: + - Xu Yilun <yilun.xu@intel.com> + +allOf: + - $ref: fpga-bridge.yaml# + +properties: + compatible: + const: altr,socfpga-fpga2sdram-bridge + + reg: + maxItems: 1 + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + fpga-bridge@ffc25080 { + compatible = "altr,socfpga-fpga2sdram-bridge"; + reg = <0xffc25080 0x4>; + bridge-enable = <0>; + }; diff --git a/Documentation/devicetree/bindings/fpga/altr,socfpga-hps2fpga-bridge.yaml b/Documentation/devicetree/bindings/fpga/altr,socfpga-hps2fpga-bridge.yaml new file mode 100644 index 000000000000..d19c6660d6c9 --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/altr,socfpga-hps2fpga-bridge.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fpga/altr,socfpga-hps2fpga-bridge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera FPGA/HPS Bridge + +maintainers: + - Xu Yilun <yilun.xu@intel.com> + +allOf: + - $ref: fpga-bridge.yaml# + +properties: + compatible: + enum: + - altr,socfpga-lwhps2fpga-bridge + - altr,socfpga-hps2fpga-bridge + - altr,socfpga-fpga2hps-bridge + + reg: + maxItems: 1 + + resets: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - resets + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/reset/altr,rst-mgr.h> + + fpga-bridge@ff400000 { + compatible = "altr,socfpga-lwhps2fpga-bridge"; + reg = <0xff400000 0x100000>; + bridge-enable = <0>; + clocks = <&l4_main_clk>; + resets = <&rst LWHPS2FPGA_RESET>; + }; diff --git a/Documentation/devicetree/bindings/fpga/fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/fpga-bridge.txt deleted file mode 100644 index 72e06917288a..000000000000 --- a/Documentation/devicetree/bindings/fpga/fpga-bridge.txt +++ /dev/null @@ -1,13 +0,0 @@ -FPGA Bridge Device Tree Binding - -Optional properties: -- bridge-enable : 0 if driver should disable bridge at startup - 1 if driver should enable bridge at startup - Default is to leave bridge in current state. - -Example: - fpga_bridge3: fpga-bridge@ffc25080 { - compatible = "altr,socfpga-fpga2sdram-bridge"; - reg = <0xffc25080 0x4>; - bridge-enable = <0>; - }; diff --git a/Documentation/devicetree/bindings/fpga/fpga-bridge.yaml b/Documentation/devicetree/bindings/fpga/fpga-bridge.yaml new file mode 100644 index 000000000000..1ccb2aa18726 --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/fpga-bridge.yaml @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fpga/fpga-bridge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: FPGA Bridge + +maintainers: + - Michal Simek <michal.simek@amd.com> + +properties: + $nodename: + pattern: "^fpga-bridge(@.*|-([0-9]|[1-9][0-9]+))?$" + + bridge-enable: + description: | + 0 if driver should disable bridge at startup + 1 if driver should enable bridge at startup + Default is to leave bridge in current state. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + +additionalProperties: true + +examples: + - | + fpga-bridge { + bridge-enable = <0>; + }; diff --git a/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml b/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml index a7d4b8e59e19..5bf731f9d99a 100644 --- a/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml +++ b/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml @@ -9,6 +9,9 @@ title: Xilinx LogiCORE Partial Reconfig Decoupler/AXI shutdown manager Softcore maintainers: - Nava kishore Manne <nava.kishore.manne@amd.com> +allOf: + - $ref: fpga-bridge.yaml# + description: | The Xilinx LogiCORE Partial Reconfig(PR) Decoupler manages one or more decouplers/fpga bridges. The controller can decouple/disable the bridges @@ -51,7 +54,7 @@ required: - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml index c1060e5fcef3..d3d8a2e143ed 100644 --- a/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml +++ b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml @@ -126,7 +126,7 @@ examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> - gpio@e000a000 { + gpio@a0020000 { compatible = "xlnx,xps-gpio-1.00.a"; reg = <0xa0020000 0x10000>; #gpio-cells = <2>; diff --git a/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml b/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml index e7daae862578..132aaa49597b 100644 --- a/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml +++ b/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml @@ -22,36 +22,20 @@ properties: interrupts: maxItems: 1 - clocks: {} - clock-names: {} - iommus: {} - power-domains: {} - -if: - properties: - compatible: - contains: - const: samsung,exynos5250-g2d - -then: - properties: - clocks: - items: - - description: fimg2d clock - clock-names: - items: - - const: fimg2d - -else: - properties: - clocks: - items: - - description: sclk_fimg2d clock - - description: fimg2d clock - clock-names: - items: - - const: sclk_fimg2d - - const: fimg2d + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + + iommus: + minItems: 1 + maxItems: 2 + + power-domains: + maxItems: 1 required: - compatible @@ -60,6 +44,33 @@ required: - clocks - clock-names +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos5250-g2d + + then: + properties: + clocks: + items: + - description: fimg2d clock + clock-names: + items: + - const: fimg2d + + else: + properties: + clocks: + items: + - description: sclk_fimg2d clock + - description: fimg2d clock + clock-names: + items: + - const: sclk_fimg2d + - const: fimg2d + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml index d60626ffb28e..18bf44e06e8f 100644 --- a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml +++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml @@ -12,10 +12,11 @@ maintainers: properties: compatible: enum: - - "samsung,s5pv210-rotator" - - "samsung,exynos4210-rotator" - - "samsung,exynos4212-rotator" - - "samsung,exynos5250-rotator" + - samsung,s5pv210-rotator + - samsung,exynos4210-rotator + - samsung,exynos4212-rotator + - samsung,exynos5250-rotator + reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml b/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml index 5317ac64426a..9fb530e65d0e 100644 --- a/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml +++ b/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml @@ -21,40 +21,20 @@ properties: interrupts: maxItems: 1 - clocks: {} - clock-names: {} - iommus: {} - power-domains: {} - -if: - properties: - compatible: - contains: - const: samsung,exynos5420-scaler - -then: - properties: - clocks: - items: - - description: mscl clock - - clock-names: - items: - - const: mscl - -else: - properties: - clocks: - items: - - description: pclk clock - - description: aclk clock - - description: aclk_xiu clock - - clock-names: - items: - - const: pclk - - const: aclk - - const: aclk_xiu + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 + + iommus: + minItems: 1 + maxItems: 2 + + power-domains: + maxItems: 1 required: - compatible @@ -63,6 +43,39 @@ required: - clocks - clock-names +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos5420-scaler + + then: + properties: + clocks: + items: + - description: mscl clock + clock-names: + items: + - const: mscl + iommus: + minItems: 2 + + else: + properties: + clocks: + items: + - description: pclk clock + - description: aclk clock + - description: aclk_xiu clock + clock-names: + items: + - const: pclk + - const: aclk + - const: aclk_xiu + iommus: + maxItems: 1 + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml index 94b75d9f66cd..1b31b87c1800 100644 --- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml @@ -19,6 +19,7 @@ allOf: - st,stm32f7-i2c - st,stm32mp13-i2c - st,stm32mp15-i2c + - st,stm32mp25-i2c then: properties: i2c-scl-rising-time-ns: @@ -41,6 +42,30 @@ allOf: clock-frequency: enum: [100000, 400000] + - if: + properties: + compatible: + contains: + enum: + - st,stm32f4-i2c + - st,stm32f7-i2c + - st,stm32mp13-i2c + - st,stm32mp15-i2c + then: + properties: + interrupts: + minItems: 2 + + interrupt-names: + minItems: 2 + else: + properties: + interrupts: + maxItems: 1 + + interrupt-names: + maxItems: 1 + properties: compatible: enum: @@ -48,6 +73,7 @@ properties: - st,stm32f7-i2c - st,stm32mp13-i2c - st,stm32mp15-i2c + - st,stm32mp25-i2c reg: maxItems: 1 @@ -56,11 +82,13 @@ properties: items: - description: interrupt ID for I2C event - description: interrupt ID for I2C error + minItems: 1 interrupt-names: items: - const: event - const: error + minItems: 1 resets: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml index ce7ba634643c..ddec9747436c 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml @@ -4,36 +4,92 @@ $id: http://devicetree.org/schemas/iio/adc/adi,ad7091r5.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analog Devices AD7091R5 4-Channel 12-Bit ADC +title: Analog Devices AD7091R-2/-4/-5/-8 Multi-Channel 12-Bit ADCs maintainers: - Michael Hennerich <michael.hennerich@analog.com> + - Marcelo Schmitt <marcelo.schmitt@analog.com> description: | - Analog Devices AD7091R5 4-Channel 12-Bit ADC + Analog Devices AD7091R5 4-Channel 12-Bit ADC supporting I2C interface https://www.analog.com/media/en/technical-documentation/data-sheets/ad7091r-5.pdf + Analog Devices AD7091R-2/AD7091R-4/AD7091R-8 2-/4-/8-Channel 12-Bit ADCs + supporting SPI interface + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7091R-2_7091R-4_7091R-8.pdf properties: compatible: enum: + - adi,ad7091r2 + - adi,ad7091r4 - adi,ad7091r5 + - adi,ad7091r8 reg: maxItems: 1 + vdd-supply: + description: + Provide VDD power to the sensor (VDD range is from 2.7V to 5.25V). + + vdrive-supply: + description: + Determines the voltage level at which the interface logic will operate. + The V_drive voltage range is from 1.8V to 5.25V and must not exceed VDD by + more than 0.3V. + vref-supply: description: Phandle to the vref power supply - interrupts: + convst-gpios: + description: + GPIO connected to the CONVST pin. + This logic input is used to initiate conversions on the analog + input channels. maxItems: 1 + reset-gpios: + maxItems: 1 + + interrupts: + description: + Interrupt for signaling when conversion results exceed the high limit for + ADC readings or fall below the low limit for them. Interrupt source must + be attached to ALERT/BUSY/GPO0 pin. + maxItems: 1 required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + + # AD7091R-2 does not have ALERT/BUSY/GPO pin + - if: + properties: + compatible: + contains: + enum: + - adi,ad7091r2 + then: + properties: + interrupts: false + + - if: + properties: + compatible: + contains: + enum: + - adi,ad7091r2 + - adi,ad7091r4 + - adi,ad7091r8 + then: + required: + - convst-gpios + +unevaluatedProperties: false examples: - | @@ -51,4 +107,22 @@ examples: interrupt-parent = <&gpio>; }; }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7091r8"; + reg = <0x0>; + spi-max-frequency = <1000000>; + vref-supply = <&adc_vref>; + convst-gpios = <&gpio 25 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + interrupts = <22 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + }; + }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml index 5fcc8dd012f1..be2616ff9af6 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml @@ -80,9 +80,9 @@ examples: compatible = "adi,ad7780"; reg = <0>; - avdd-supply = <&vdd_supply>; - powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + avdd-supply = <&vdd_supply>; + powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml new file mode 100644 index 000000000000..4cba856e8d47 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max34408.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX34408/MAX34409 current monitors with overcurrent control + +maintainers: + - Ivan Mikhaylov <fr0st61te@gmail.com> + +description: | + The MAX34408/MAX34409 are two- and four-channel current monitors that are + configured and monitored with a standard I2C/SMBus serial interface. Each + unidirectional current sensor offers precision high-side operation with a + low full-scale sense voltage. The devices automatically sequence through + two or four channels and collect the current-sense samples and average them + to reduce the effect of impulse noise. The raw ADC samples are compared to + user-programmable digital thresholds to indicate overcurrent conditions. + Overcurrent conditions trigger a hardware output to provide an immediate + indication to shut down any necessary external circuitry. + + Specifications about the devices can be found at: + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX34408-MAX34409.pdf + +properties: + compatible: + enum: + - maxim,max34408 + - maxim,max34409 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + powerdown-gpios: + description: + Shutdown Output. Open-drain output. This output transitions to high impedance + when any of the digital comparator thresholds are exceeded as long as the ENA + pin is high. + maxItems: 1 + + powerdown-status-gpios: + description: + SHTDN Enable Input. CMOS digital input. Connect to GND to clear the latch and + unconditionally deassert (force low) the SHTDN output and reset the shutdown + delay. Connect to VDD to enable normal latch operation of the SHTDN output. + maxItems: 1 + + vdd-supply: true + +patternProperties: + "^channel@[0-3]$": + $ref: adc.yaml + type: object + description: + Represents the internal channels of the ADC. + + properties: + reg: + items: + - minimum: 0 + maximum: 3 + + maxim,rsense-val-micro-ohms: + description: + Adjust the Rsense value to monitor higher or lower current levels for + input. + enum: [250, 500, 1000, 5000, 10000, 50000, 100000, 200000, 500000] + default: 1000 + + required: + - reg + - maxim,rsense-val-micro-ohms + + unevaluatedProperties: false + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: maxim,max34408 + then: + patternProperties: + "^channel@[2-3]$": false + "^channel@[0-1]$": + properties: + reg: + maximum: 1 + else: + patternProperties: + "^channel@[0-3]$": + properties: + reg: + maximum: 3 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@1e { + compatible = "maxim,max34409"; + reg = <0x1e>; + powerdown-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + powerdown-status-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + maxim,rsense-val-micro-ohms = <5000>; + }; + + channel@1 { + reg = <0x1>; + maxim,rsense-val-micro-ohms = <10000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml index 73def67fbe01..5ed893ef5c18 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml @@ -25,7 +25,7 @@ properties: - const: qcom,spmi-iadc reg: - description: IADC base address and length in the SPMI PMIC register map + description: IADC base address in the SPMI PMIC register map maxItems: 1 qcom,external-resistor-micro-ohms: @@ -50,15 +50,17 @@ additionalProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> - spmi { + + pmic { #address-cells = <1>; #size-cells = <0>; - pmic_iadc: adc@3600 { + + adc@3600 { compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc"; reg = <0x3600>; interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; qcom,external-resistor-micro-ohms = <10000>; - #io-channel-cells = <1>; + #io-channel-cells = <1>; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml index b3a626389870..f39bc92c2b99 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml @@ -43,9 +43,9 @@ examples: #address-cells = <1>; #size-cells = <0>; - pmic_rradc: adc@4500 { + adc@4500 { compatible = "qcom,pmi8998-rradc"; reg = <0x4500>; - #io-channel-cells = <1>; + #io-channel-cells = <1>; }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml index ad7d6fc49de5..40fa0710f1f0 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -236,11 +236,11 @@ additionalProperties: false examples: - | - spmi { + pmic { #address-cells = <1>; #size-cells = <0>; - /* VADC node */ - pmic_vadc: adc@3100 { + + adc@3100 { compatible = "qcom,spmi-vadc"; reg = <0x3100>; interrupts = <0x0 0x31 0x0 0x1>; @@ -281,9 +281,10 @@ examples: #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> #include <dt-bindings/interrupt-controller/irq.h> - spmi { + pmic { #address-cells = <1>; #size-cells = <0>; + adc@3100 { reg = <0x3100>; compatible = "qcom,spmi-adc7"; diff --git a/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml index 720c16a108d4..f94057d8f605 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml @@ -67,19 +67,4 @@ required: - compatible - "#io-channel-cells" -examples: - - | - #include <dt-bindings/clock/mt8183-clk.h> - pmic { - compatible = "ti,twl6035-pmic", "ti,palmas-pmic"; - adc { - compatible = "ti,palmas-gpadc"; - interrupts = <18 0>, - <16 0>, - <17 0>; - #io-channel-cells = <1>; - ti,channel0-current-microamp = <5>; - ti,channel3-current-microamp = <10>; - }; - }; ... diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml index 2ee6080deac7..67de9d4e3a1d 100644 --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml @@ -12,6 +12,9 @@ maintainers: description: | Digital Step Attenuator IIO devices with gpio interface. Offer various frequency and attenuation ranges. + ADRF5750 2 dB LSB, 4-Bit, Silicon Digital Attenuator, 10 MHz to 60 GHz + https://www.analog.com/media/en/technical-documentation/data-sheets/adrf5740.pdf + HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf @@ -22,6 +25,7 @@ description: | properties: compatible: enum: + - adi,adrf5740 - adi,hmc425a - adi,hmc540s diff --git a/Documentation/devicetree/bindings/iio/chemical/aosong,ags02ma.yaml b/Documentation/devicetree/bindings/iio/chemical/aosong,ags02ma.yaml new file mode 100644 index 000000000000..35e7b094e878 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/aosong,ags02ma.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/aosong,ags02ma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aosong AGS02MA VOC Sensor + +description: | + AGS02MA is an TVOC (Total Volatile Organic Compounds) i2c sensor with default + address of 0x1a. + + Datasheet: + https://asairsensors.com/wp-content/uploads/2021/09/AGS02MA.pdf + +maintainers: + - Anshul Dalal <anshulusr@gmail.com> + +properties: + compatible: + enum: + - aosong,ags02ma + + reg: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + voc-sensor@1a { + compatible = "aosong,ags02ma"; + reg = <0x1a>; + vdd-supply = <&vdd_regulator>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml index 3a84739736f6..c81285d84db7 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml @@ -26,6 +26,11 @@ properties: vdd-supply: true vss-supply: true + adi,rbuf-gain2-en: + description: Specify to allow an external amplifier to be connected in a + gain of two configuration. + type: boolean + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml new file mode 100644 index 000000000000..0dc577c33918 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/microchip,mcp4821.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip MCP4821 and similar DACs + +description: | + Supports MCP48x1 (single channel) and MCP48x2 (dual channel) series of DACs. + Device supports simplex communication over SPI in Mode 0 and Mode 3. + + +---------+--------------+-------------+ + | Device | Resolution | Channels | + |---------|--------------|-------------| + | MCP4801 | 8-bit | 1 | + | MCP4802 | 8-bit | 2 | + | MCP4811 | 10-bit | 1 | + | MCP4812 | 10-bit | 2 | + | MCP4821 | 12-bit | 1 | + | MCP4822 | 12-bit | 2 | + +---------+--------------+-------------+ + + Datasheet: + MCP48x1: https://ww1.microchip.com/downloads/en/DeviceDoc/22244B.pdf + MCP48x2: https://ww1.microchip.com/downloads/en/DeviceDoc/20002249B.pdf + +maintainers: + - Anshul Dalal <anshulusr@gmail.com> + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - microchip,mcp4801 + - microchip,mcp4802 + - microchip,mcp4811 + - microchip,mcp4812 + - microchip,mcp4821 + - microchip,mcp4822 + + reg: + maxItems: 1 + + vdd-supply: true + + ldac-gpios: + description: | + Active Low LDAC (Latch DAC Input) pin used to update the DAC output. + maxItems: 1 + + powerdown-gpios: + description: | + Active Low SHDN pin used to enter the shutdown mode. + maxItems: 1 + + spi-cpha: true + spi-cpol: true + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + dac@0 { + compatible = "microchip,mcp4821"; + reg = <0>; + vdd-supply = <&vdd_regulator>; + ldac-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + spi-cpha; + spi-cpol; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml new file mode 100644 index 000000000000..7f6d0f9edc75 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/humidity/ti,hdc3020.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HDC3020/HDC3021/HDC3022 humidity and temperature iio sensors + +maintainers: + - Li peiyu <579lpy@gmail.com> + - Javier Carrasco <javier.carrasco.cruz@gmail.com> + +description: + https://www.ti.com/lit/ds/symlink/hdc3020.pdf + + The HDC302x is an integrated capacitive based relative humidity (RH) + and temperature sensor. + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,hdc3021 + - ti,hdc3022 + - const: ti,hdc3020 + - const: ti,hdc3020 + + interrupts: + maxItems: 1 + + vdd-supply: true + + reg: + maxItems: 1 + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + humidity-sensor@47 { + compatible = "ti,hdc3021", "ti,hdc3020"; + reg = <0x47>; + vdd-supply = <&vcc_3v3>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml index 4e43c80e5119..4cacc9948726 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml @@ -25,6 +25,10 @@ properties: spi-cpol: true + spi-cs-inactive-delay-ns: + minimum: 16000 + default: 16000 + interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml index c73533c54588..9b7ad609f7db 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml @@ -47,6 +47,10 @@ properties: spi-max-frequency: maximum: 2000000 + spi-cs-inactive-delay-ns: + minimum: 16000 + default: 16000 + interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi323.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi323.yaml new file mode 100644 index 000000000000..64ef26e19669 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi323.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/bosch,bmi323.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BMI323 6-Axis IMU + +maintainers: + - Jagath Jog J <jagathjog1996@gmail.com> + +description: + BMI323 is a 6-axis inertial measurement unit that supports acceleration and + gyroscopic measurements with hardware fifo buffering. Sensor also provides + events information such as motion, steps, orientation, single and double + tap detection. + +properties: + compatible: + const: bosch,bmi323 + + reg: + maxItems: 1 + + vdd-supply: true + vddio-supply: true + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + enum: + - INT1 + - INT2 + + drive-open-drain: + description: + set if the specified interrupt pin should be configured as + open drain. If not set, defaults to push-pull. + + mount-matrix: + description: + an optional 3x3 mounting rotation matrix. + +required: + - compatible + - reg + - vdd-supply + - vddio-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + // Example for I2C + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imu@68 { + compatible = "bosch,bmi323"; + reg = <0x68>; + vddio-supply = <&vddio>; + vdd-supply = <&vdd>; + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltr390.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltr390.yaml new file mode 100644 index 000000000000..5d98ef2af74d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/liteon,ltr390.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/liteon,ltr390.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lite-On LTR390 ALS and UV Sensor + +description: | + The Lite-On LTR390 is an ALS (Ambient Light Sensor) and a UV sensor in a + single package with i2c address of 0x53. + + Datasheet: + https://optoelectronics.liteon.com/upload/download/DS86-2015-0004/LTR-390UV_Final_%20DS_V1%201.pdf + +maintainers: + - Anshul Dalal <anshulusr@gmail.com> + +properties: + compatible: + enum: + - liteon,ltr390 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: | + Level interrupt pin with open drain output. + The sensor pulls this pin low when the measured reading is greater than + some configured threshold. + + vdd-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@53 { + compatible = "liteon,ltr390"; + reg = <0x53>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&vdd_regulator>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml b/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml new file mode 100644 index 000000000000..abee04cd126e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/vishay,veml6075.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Vishay VEML6075 UVA and UVB sensor + +maintainers: + - Javier Carrasco <javier.carrasco.cruz@gmail.com> + +properties: + compatible: + const: vishay,veml6075 + + reg: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + uv-sensor@10 { + compatible = "vishay,veml6075"; + reg = <0x10>; + vdd-supply = <&vdd_reg>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml new file mode 100644 index 000000000000..65a24ed67b3c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/honeywell,hsc030pa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Honeywell TruStability HSC and SSC pressure sensor series + +description: | + support for Honeywell TruStability HSC and SSC digital pressure sensor + series. + + These sensors have either an I2C, an SPI or an analog interface. Only the + digital versions are supported by this driver. + + There are 118 models with different pressure ranges available in each family. + The vendor calls them "HSC series" and "SSC series". All of them have an + identical programming model but differ in pressure range, unit and transfer + function. + + To support different models one needs to specify the pressure range as well + as the transfer function. Pressure range can either be provided via + pressure-triplet (directly extracted from the part number) or in case it's + a custom chip via numerical range limits converted to pascals. + + The transfer function defines the ranges of raw conversion values delivered + by the sensor. pmin-pascal and pmax-pascal corespond to the minimum and + maximum pressure that can be measured. + + Please note that in case of an SPI-based sensor, the clock signal should not + exceed 800kHz and the MOSI signal is not required. + + Specifications about the devices can be found at: + https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf + https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-ssc-series/documents/sps-siot-trustability-ssc-series-standard-accuracy-board-mount-pressure-sensors-50099533-a-en-ciid-151134.pdf + +maintainers: + - Petre Rodan <petre.rodan@subdimension.ro> + +properties: + compatible: + const: honeywell,hsc030pa + + reg: + maxItems: 1 + + honeywell,transfer-function: + description: | + Transfer function which defines the range of valid values delivered by + the sensor. + 0 - A, 10% to 90% of 2^14 + 1 - B, 5% to 95% of 2^14 + 2 - C, 5% to 85% of 2^14 + 3 - F, 4% to 94% of 2^14 + enum: [0, 1, 2, 3] + $ref: /schemas/types.yaml#/definitions/uint32 + + honeywell,pressure-triplet: + description: | + Case-sensitive five character string that defines pressure range, unit + and type as part of the device nomenclature. In the unlikely case of a + custom chip, set to "NA" and provide pmin-pascal and pmax-pascal. + enum: [001BA, 1.6BA, 2.5BA, 004BA, 006BA, 010BA, 1.6MD, 2.5MD, 004MD, + 006MD, 010MD, 016MD, 025MD, 040MD, 060MD, 100MD, 160MD, 250MD, + 400MD, 600MD, 001BD, 1.6BD, 2.5BD, 004BD, 2.5MG, 004MG, 006MG, + 010MG, 016MG, 025MG, 040MG, 060MG, 100MG, 160MG, 250MG, 400MG, + 600MG, 001BG, 1.6BG, 2.5BG, 004BG, 006BG, 010BG, 100KA, 160KA, + 250KA, 400KA, 600KA, 001GA, 160LD, 250LD, 400LD, 600LD, 001KD, + 1.6KD, 2.5KD, 004KD, 006KD, 010KD, 016KD, 025KD, 040KD, 060KD, + 100KD, 160KD, 250KD, 400KD, 250LG, 400LG, 600LG, 001KG, 1.6KG, + 2.5KG, 004KG, 006KG, 010KG, 016KG, 025KG, 040KG, 060KG, 100KG, + 160KG, 250KG, 400KG, 600KG, 001GG, 015PA, 030PA, 060PA, 100PA, + 150PA, 0.5ND, 001ND, 002ND, 004ND, 005ND, 010ND, 020ND, 030ND, + 001PD, 005PD, 015PD, 030PD, 060PD, 001NG, 002NG, 004NG, 005NG, + 010NG, 020NG, 030NG, 001PG, 005PG, 015PG, 030PG, 060PG, 100PG, + 150PG, NA] + $ref: /schemas/types.yaml#/definitions/string + + honeywell,pmin-pascal: + description: | + Minimum pressure value the sensor can measure in pascal. + To be specified only if honeywell,pressure-triplet is set to "NA". + + honeywell,pmax-pascal: + description: | + Maximum pressure value the sensor can measure in pascal. + To be specified only if honeywell,pressure-triplet is set to "NA". + + vdd-supply: + description: + Provide VDD power to the sensor (either 3.3V or 5V depending on the chip) + + spi-max-frequency: + maximum: 800000 + +required: + - compatible + - reg + - honeywell,transfer-function + - honeywell,pressure-triplet + +additionalProperties: false + +dependentSchemas: + honeywell,pmin-pascal: + properties: + honeywell,pressure-triplet: + const: NA + honeywell,pmax-pascal: + properties: + honeywell,pressure-triplet: + const: NA + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pressure@28 { + compatible = "honeywell,hsc030pa"; + reg = <0x28>; + honeywell,transfer-function = <0>; + honeywell,pressure-triplet = "030PA"; + }; + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + pressure@0 { + compatible = "honeywell,hsc030pa"; + reg = <0>; + spi-max-frequency = <800000>; + honeywell,transfer-function = <0>; + honeywell,pressure-triplet = "NA"; + honeywell,pmin-pascal = <0>; + honeywell,pmax-pascal = <200000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml index b31f8120f14e..d9e903fbfd99 100644 --- a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml @@ -53,12 +53,10 @@ properties: honeywell,pmin-pascal: description: Minimum pressure value the sensor can measure in pascal. - $ref: /schemas/types.yaml#/definitions/uint32 honeywell,pmax-pascal: description: Maximum pressure value the sensor can measure in pascal. - $ref: /schemas/types.yaml#/definitions/uint32 honeywell,transfer-function: description: | diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml index 4a55e7f25ae7..03bb5d4fa8b5 100644 --- a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90632.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Melexis MLX90632 contactless Infra Red temperature sensor +title: Melexis MLX90632 and MLX90635 contactless Infra Red temperature sensor maintainers: - Crt Mori <cmo@melexis.com> @@ -27,9 +27,24 @@ description: | Since measured object emissivity effects Infra Red energy emitted, emissivity should be set before requesting the object temperature. + https://www.melexis.com/en/documents/documentation/datasheets/datasheet-mlx90635 + + MLX90635 is most suitable for consumer applications where + measured object temperature is in range between -20 to 100 degrees + Celsius with relative error of measurement 2 degree Celsius in + object temperature range for industrial applications, while just 0.2 + degree Celsius for human body measurement applications. Since it can + operate and measure ambient temperature in range of -20 to 85 degrees + Celsius it is suitable also for outdoor use. + + Since measured object emissivity effects Infra Red energy emitted, + emissivity should be set before requesting the object temperature. + properties: compatible: - const: melexis,mlx90632 + enum: + - melexis,mlx90632 + - melexis,mlx90635 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/temperature/microchip,mcp9600.yaml b/Documentation/devicetree/bindings/iio/temperature/microchip,mcp9600.yaml new file mode 100644 index 000000000000..d2cafa38a544 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/microchip,mcp9600.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/temperature/microchip,mcp9600.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip MCP9600 thermocouple EMF converter + +maintainers: + - Andrew Hepp <andrew.hepp@ahepp.dev> + +description: + https://ww1.microchip.com/downloads/en/DeviceDoc/MCP960X-Data-Sheet-20005426.pdf + +properties: + compatible: + const: microchip,mcp9600 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 6 + + interrupt-names: + minItems: 1 + maxItems: 6 + items: + enum: + - open-circuit + - short-circuit + - alert1 + - alert2 + - alert3 + - alert4 + + thermocouple-type: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Type of thermocouple (THERMOCOUPLE_TYPE_K if omitted). + Use defines in dt-bindings/iio/temperature/thermocouple.h. + Supported types are B, E, J, K, N, R, S, T. + + vdd-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/iio/temperature/thermocouple.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@60 { + compatible = "microchip,mcp9600"; + reg = <0x60>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "open-circuit"; + thermocouple-type = <THERMOCOUPLE_TYPE_K>; + vdd-supply = <&vdd>; + }; + }; diff --git a/Documentation/devicetree/bindings/index.rst b/Documentation/devicetree/bindings/index.rst index d9002a3a0abb..cc1fbdc05657 100644 --- a/Documentation/devicetree/bindings/index.rst +++ b/Documentation/devicetree/bindings/index.rst @@ -4,6 +4,7 @@ :maxdepth: 1 ABI + dts-coding-style writing-bindings writing-schema submitting-patches diff --git a/Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.yaml b/Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.yaml new file mode 100644 index 000000000000..5e86f6de6978 --- /dev/null +++ b/Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/adafruit,seesaw-gamepad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Adafruit Mini I2C Gamepad with seesaw + +maintainers: + - Anshul Dalal <anshulusr@gmail.com> + +description: | + Adafruit Mini I2C Gamepad + + +-----------------------------+ + | ___ | + | / \ (X) | + | | S | __ __ (Y) (A) | + | \___/ |ST| |SE| (B) | + | | + +-----------------------------+ + + S -> 10-bit precision bidirectional analog joystick + ST -> Start + SE -> Select + X, A, B, Y -> Digital action buttons + + Datasheet: https://cdn-learn.adafruit.com/downloads/pdf/gamepad-qt.pdf + Product page: https://www.adafruit.com/product/5743 + Arduino Driver: https://github.com/adafruit/Adafruit_Seesaw + +properties: + compatible: + const: adafruit,seesaw-gamepad + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: + The gamepad's IRQ pin triggers a rising edge if interrupts are enabled. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + joystick@50 { + compatible = "adafruit,seesaw-gamepad"; + interrupts = <18 IRQ_TYPE_EDGE_RISING>; + reg = <0x50>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml index 159cd9d9fe57..cc78c2152921 100644 --- a/Documentation/devicetree/bindings/input/gpio-keys.yaml +++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml @@ -31,7 +31,23 @@ patternProperties: maxItems: 1 interrupts: - maxItems: 1 + oneOf: + - items: + - description: Optional key interrupt or wakeup interrupt + - items: + - description: Key interrupt + - description: Wakeup interrupt + + interrupt-names: + description: + Optional interrupt names, can be used to specify a separate dedicated + wake-up interrupt in addition to the gpio irq + oneOf: + - items: + - enum: [ irq, wakeup ] + - items: + - const: irq + - const: wakeup label: description: Descriptive name of the key. @@ -97,6 +113,20 @@ patternProperties: - required: - gpios + allOf: + - if: + properties: + interrupts: + minItems: 2 + required: + - interrupts + then: + properties: + interrupt-names: + minItems: 2 + required: + - interrupt-names + dependencies: wakeup-event-action: [ wakeup-source ] linux,input-value: [ gpios ] @@ -137,6 +167,15 @@ examples: linux,code = <108>; interrupts = <1 IRQ_TYPE_EDGE_FALLING>; }; + + key-wakeup { + label = "GPIO Key WAKEUP"; + linux,code = <143>; + interrupts-extended = <&intc 2 IRQ_TYPE_EDGE_FALLING>, + <&intc_wakeup 0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "irq", "wakeup"; + wakeup-source; + }; }; ... diff --git a/Documentation/devicetree/bindings/input/gpio-mouse.txt b/Documentation/devicetree/bindings/input/gpio-mouse.txt deleted file mode 100644 index 519510a11af9..000000000000 --- a/Documentation/devicetree/bindings/input/gpio-mouse.txt +++ /dev/null @@ -1,32 +0,0 @@ -Device-Tree bindings for GPIO attached mice - -This simply uses standard GPIO handles to define a simple mouse connected -to 5-7 GPIO lines. - -Required properties: - - compatible: must be "gpio-mouse" - - scan-interval-ms: The scanning interval in milliseconds - - up-gpios: GPIO line phandle to the line indicating "up" - - down-gpios: GPIO line phandle to the line indicating "down" - - left-gpios: GPIO line phandle to the line indicating "left" - - right-gpios: GPIO line phandle to the line indicating "right" - -Optional properties: - - button-left-gpios: GPIO line handle to the left mouse button - - button-middle-gpios: GPIO line handle to the middle mouse button - - button-right-gpios: GPIO line handle to the right mouse button -Example: - -#include <dt-bindings/gpio/gpio.h> - -gpio-mouse { - compatible = "gpio-mouse"; - scan-interval-ms = <50>; - up-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; - down-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - left-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - right-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; - button-left-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; - button-middle-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; - button-right-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; -}; diff --git a/Documentation/devicetree/bindings/input/gpio-mouse.yaml b/Documentation/devicetree/bindings/input/gpio-mouse.yaml new file mode 100644 index 000000000000..3928ec6aff1d --- /dev/null +++ b/Documentation/devicetree/bindings/input/gpio-mouse.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/gpio-mouse.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO attached mouse + +description: | + This simply uses standard GPIO handles to define a simple mouse connected + to 5-7 GPIO lines. + +maintainers: + - Anshul Dalal <anshulusr@gmail.com> + +properties: + compatible: + const: gpio-mouse + + scan-interval-ms: + maxItems: 1 + + up-gpios: + maxItems: 1 + + down-gpios: + maxItems: 1 + + left-gpios: + maxItems: 1 + + right-gpios: + maxItems: 1 + + button-left-gpios: + maxItems: 1 + + button-middle-gpios: + maxItems: 1 + + button-right-gpios: + maxItems: 1 + +required: + - compatible + - scan-interval-ms + - up-gpios + - down-gpios + - left-gpios + - right-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + gpio-mouse { + compatible = "gpio-mouse"; + scan-interval-ms = <50>; + up-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + down-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + left-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + right-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + button-left-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + button-middle-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + button-right-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/input/iqs269a.yaml b/Documentation/devicetree/bindings/input/iqs269a.yaml index 3c430d38594f..2c3f693b8982 100644 --- a/Documentation/devicetree/bindings/input/iqs269a.yaml +++ b/Documentation/devicetree/bindings/input/iqs269a.yaml @@ -9,6 +9,9 @@ title: Azoteq IQS269A Capacitive Touch Controller maintainers: - Jeff LaBundy <jeff@labundy.com> +allOf: + - $ref: input.yaml# + description: | The Azoteq IQS269A is an 8-channel capacitive touch controller that features additional Hall-effect and inductive sensing capabilities. @@ -17,7 +20,10 @@ description: | properties: compatible: - const: azoteq,iqs269a + enum: + - azoteq,iqs269a + - azoteq,iqs269a-00 + - azoteq,iqs269a-d0 reg: maxItems: 1 @@ -204,6 +210,73 @@ properties: default: 1 description: Specifies the slider coordinate filter strength. + azoteq,touch-hold-ms: + multipleOf: 256 + minimum: 256 + maximum: 65280 + default: 5120 + description: + Specifies the length of time (in ms) for which the channel selected by + 'azoteq,gpio3-select' must be held in a state of touch in order for an + approximately 60-ms pulse to be asserted on the GPIO4 pin. + + linux,keycodes: + minItems: 1 + maxItems: 8 + description: | + Specifies the numeric keycodes associated with each available gesture in + the following order (enter 0 for unused gestures): + 0: Slider 0 tap + 1: Slider 0 hold + 2: Slider 0 positive flick or swipe + 3: Slider 0 negative flick or swipe + 4: Slider 1 tap + 5: Slider 1 hold + 6: Slider 1 positive flick or swipe + 7: Slider 1 negative flick or swipe + + azoteq,gesture-swipe: + type: boolean + description: + Directs the device to interpret axial gestures as a swipe (finger remains + on slider) instead of a flick (finger leaves slider). + + azoteq,timeout-tap-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + default: 400 + description: + Specifies the length of time (in ms) within which a slider touch must be + released in order to be interpreted as a tap. Default and maximum values + as well as step size are reduced by a factor of 4 with device version 2. + + azoteq,timeout-swipe-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + default: 2000 + description: + Specifies the length of time (in ms) within which an axial gesture must be + completed in order to be interpreted as a flick or swipe. Default and max- + imum values as well as step size are reduced by a factor of 4 with device + version 2. + + azoteq,thresh-swipe: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 128 + description: + Specifies the number of points across which an axial gesture must travel + in order to be interpreted as a flick or swipe. + +dependencies: + azoteq,gesture-swipe: ["linux,keycodes"] + azoteq,timeout-tap-ms: ["linux,keycodes"] + azoteq,timeout-swipe-ms: ["linux,keycodes"] + azoteq,thresh-swipe: ["linux,keycodes"] + patternProperties: "^channel@[0-7]$": type: object @@ -454,6 +527,21 @@ patternProperties: additionalProperties: false +if: + properties: + compatible: + contains: + enum: + - azoteq,iqs269a-d0 +then: + patternProperties: + "^channel@[0-7]$": + properties: + azoteq,slider1-select: false +else: + properties: + azoteq,touch-hold-ms: false + required: - compatible - reg @@ -484,6 +572,14 @@ examples: azoteq,hall-enable; azoteq,suspend-mode = <2>; + linux,keycodes = <KEY_PLAYPAUSE>, + <KEY_STOPCD>, + <KEY_NEXTSONG>, + <KEY_PREVIOUSSONG>; + + azoteq,timeout-tap-ms = <400>; + azoteq,timeout-swipe-ms = <800>; + channel@0 { reg = <0x0>; diff --git a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml index e34c9e78d38d..70567d92c746 100644 --- a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml +++ b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml @@ -90,26 +90,4 @@ required: unevaluatedProperties: false -examples: - - | - #include <dt-bindings/input/input.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - - pmic { - compatible = "mediatek,mt6397"; - - keys { - compatible = "mediatek,mt6397-keys"; - mediatek,long-press-mode = <1>; - power-off-time-sec = <0>; - - key-power { - linux,keycodes = <KEY_POWER>; - wakeup-source; - }; - - key-home { - linux,keycodes = <KEY_VOLUMEDOWN>; - }; - }; - }; +... diff --git a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml index 5b5d4f7d3482..7ade03f1b32b 100644 --- a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml +++ b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml @@ -45,13 +45,13 @@ properties: Enables the Linux input system's autorepeat feature on the input device. linux,keycodes: - minItems: 6 - maxItems: 6 + minItems: 3 + maxItems: 8 description: | Specifies an array of numeric keycode values to be used for the channels. If this property is omitted, KEY_A, KEY_B, etc are used as defaults. - The array must have exactly six entries. + The number of entries must correspond to the number of channels. microchip,sensor-gain: $ref: /schemas/types.yaml#/definitions/uint32 @@ -70,6 +70,59 @@ properties: open drain. This property allows using the active high push-pull output. + microchip,sensitivity-delta-sense: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 32 + enum: [1, 2, 4, 8, 16, 32, 64, 128] + description: + Controls the sensitivity multiplier of a touch detection. + Higher value means more sensitive settings. + At the more sensitive settings, touches are detected for a smaller delta + capacitance corresponding to a "lighter" touch. + + microchip,signal-guard: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 8 + items: + enum: [0, 1] + description: | + 0 - off + 1 - on + The signal guard isolates the signal from virtual grounds. + If enabled then the behavior of the channel is changed to signal guard. + The number of entries must correspond to the number of channels. + + microchip,input-threshold: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 8 + items: + minimum: 0 + maximum: 127 + description: + Specifies the delta threshold that is used to determine if a touch has + been detected. A higher value means a larger difference in capacitance + is required for a touch to be registered, making the touch sensor less + sensitive. + The number of entries must correspond to the number of channels. + + microchip,calib-sensitivity: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 8 + items: + enum: [1, 2, 4] + description: | + Specifies an array of numeric values that controls the gain + used by the calibration routine to enable sensor inputs + to be more sensitive for proximity detection. + Gain is based on touch pad capacitance range + 1 - 5-50pF + 2 - 0-25pF + 4 - 0-12.5pF + The number of entries must correspond to the number of channels. + patternProperties: "^led@[0-7]$": type: object @@ -99,10 +152,29 @@ allOf: contains: enum: - microchip,cap1106 + - microchip,cap1203 + - microchip,cap1206 + - microchip,cap1293 + - microchip,cap1298 then: patternProperties: "^led@[0-7]$": false + - if: + properties: + compatible: + contains: + enum: + - microchip,cap1106 + - microchip,cap1126 + - microchip,cap1188 + - microchip,cap1203 + - microchip,cap1206 + then: + properties: + microchip,signal-guard: false + microchip,calib-sensitivity: false + required: - compatible - interrupts @@ -122,6 +194,8 @@ examples: reg = <0x28>; autorepeat; microchip,sensor-gain = <2>; + microchip,sensitivity-delta-sense = <16>; + microchip,input-threshold = <21>, <18>, <46>, <46>, <46>, <21>; linux,keycodes = <103>, /* KEY_UP */ <106>, /* KEY_RIGHT */ diff --git a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml index a401a0bfcbec..4c8d303ff93c 100644 --- a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml +++ b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml @@ -28,21 +28,4 @@ required: additionalProperties: false -examples: - - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - sc2731_pmic: pmic@0 { - compatible = "sprd,sc2731"; - reg = <0 0>; - spi-max-frequency = <26000000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - #address-cells = <1>; - #size-cells = <0>; - - vibrator@eb4 { - compatible = "sprd,sc2731-vibrator"; - reg = <0xeb4>; - }; - }; +... diff --git a/Documentation/devicetree/bindings/input/ti,drv2665.txt b/Documentation/devicetree/bindings/input/ti,drv2665.txt deleted file mode 100644 index 1ba97ac04305..000000000000 --- a/Documentation/devicetree/bindings/input/ti,drv2665.txt +++ /dev/null @@ -1,17 +0,0 @@ -* Texas Instruments - drv2665 Haptics driver - -Required properties: - - compatible - "ti,drv2665" - DRV2665 - - reg - I2C slave address - - vbat-supply - Required supply regulator - -Example: - -haptics: haptics@59 { - compatible = "ti,drv2665"; - reg = <0x59>; - vbat-supply = <&vbat>; -}; - -For more product information please see the link below: -http://www.ti.com/product/drv2665 diff --git a/Documentation/devicetree/bindings/input/ti,drv2667.txt b/Documentation/devicetree/bindings/input/ti,drv2667.txt deleted file mode 100644 index 996382cf994a..000000000000 --- a/Documentation/devicetree/bindings/input/ti,drv2667.txt +++ /dev/null @@ -1,17 +0,0 @@ -* Texas Instruments - drv2667 Haptics driver - -Required properties: - - compatible - "ti,drv2667" - DRV2667 - - reg - I2C slave address - - vbat-supply - Required supply regulator - -Example: - -haptics: haptics@59 { - compatible = "ti,drv2667"; - reg = <0x59>; - vbat-supply = <&vbat>; -}; - -For more product information please see the link below: -http://www.ti.com/product/drv2667 diff --git a/Documentation/devicetree/bindings/input/ti,drv266x.yaml b/Documentation/devicetree/bindings/input/ti,drv266x.yaml new file mode 100644 index 000000000000..da1818824373 --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,drv266x.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/ti,drv266x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments - drv266x Haptics driver + +description: | + Product Page: + http://www.ti.com/product/drv2665 + http://www.ti.com/product/drv2667 + +maintainers: + - Anshul Dalal <anshulusr@gmail.com> + +properties: + compatible: + enum: + - ti,drv2665 + - ti,drv2667 + + reg: + maxItems: 1 + + vbat-supply: + description: Required supply regulator + +required: + - compatible + - reg + - vbat-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + haptics@59 { + compatible = "ti,drv2667"; + reg = <0x59>; + vbat-supply = <&vbat>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml b/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml new file mode 100644 index 000000000000..c2ee89b76ea1 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/neonode,zforce.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Neonode infrared touchscreen controller + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: neonode,zforce + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + irq-gpios: + maxItems: 1 + + x-size: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + + y-size: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + + vdd-supply: true + +required: + - compatible + - reg + - interrupts + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@50 { + compatible = "neonode,zforce"; + reg = <0x50>; + interrupts = <2 0>; + vdd-supply = <®_zforce_vdd>; + + reset-gpios = <&gpio5 9 0>; /* RST */ + irq-gpios = <&gpio5 6 0>; /* IRQ, optional */ + + touchscreen-min-x = <0>; + touchscreen-size-x = <800>; + touchscreen-min-y = <0>; + touchscreen-size-y = <600>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt deleted file mode 100644 index 6805d10d226d..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt +++ /dev/null @@ -1,32 +0,0 @@ -* Samsung S6SY761 touchscreen controller - -Required properties: -- compatible : must be "samsung,s6sy761" -- reg : I2C slave address, (e.g. 0x48) -- interrupts : interrupt specification -- avdd-supply : analogic power supply -- vdd-supply : power supply - -Optional properties: -- touchscreen-size-x : see touchscreen.txt. This property is embedded in the - device. If defined it forces a different x resolution. -- touchscreen-size-y : see touchscreen.txt. This property is embedded in the - device. If defined it forces a different y resolution. - -Example: - -i2c@00000000 { - - /* ... */ - - touchscreen@48 { - compatible = "samsung,s6sy761"; - reg = <0x48>; - interrupt-parent = <&gpa1>; - interrupts = <1 IRQ_TYPE_NONE>; - avdd-supply = <&ldo30_reg>; - vdd-supply = <&ldo31_reg>; - touchscreen-size-x = <4096>; - touchscreen-size-y = <4096>; - }; -}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.yaml b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.yaml new file mode 100644 index 000000000000..1ffd17af3c53 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/samsung,s6sy761.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6SY761 touchscreen controller + +maintainers: + - Andi Shyti <andi.shyti@kernel.org> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: samsung,s6sy761 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + avdd-supply: true + vdd-supply: true + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - avdd-supply + - vdd-supply + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@48 { + compatible = "samsung,s6sy761"; + reg = <0x48>; + interrupt-parent = <&gpa1>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + avdd-supply = <&ldo30_reg>; + vdd-supply = <&ldo31_reg>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt deleted file mode 100644 index e3c27c4fd9c8..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt +++ /dev/null @@ -1,34 +0,0 @@ -* Neonode infrared touchscreen controller - -Required properties: -- compatible: must be "neonode,zforce" -- reg: I2C address of the chip -- interrupts: interrupt to which the chip is connected -- reset-gpios: reset gpio the chip is connected to -- x-size: horizontal resolution of touchscreen -- y-size: vertical resolution of touchscreen - -Optional properties: -- irq-gpios : interrupt gpio the chip is connected to -- vdd-supply: Regulator controlling the controller supply - -Example: - - i2c@00000000 { - /* ... */ - - zforce_ts@50 { - compatible = "neonode,zforce"; - reg = <0x50>; - interrupts = <2 0>; - vdd-supply = <®_zforce_vdd>; - - reset-gpios = <&gpio5 9 0>; /* RST */ - irq-gpios = <&gpio5 6 0>; /* IRQ, optional */ - - x-size = <800>; - y-size = <600>; - }; - - /* ... */ - }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml index 73f809cdb783..05067e197abe 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml @@ -25,13 +25,16 @@ properties: - const: qcom,msm8998-bwmon # BWMON v4 - items: - enum: + - qcom,qcm2290-cpu-bwmon - qcom,sc7180-cpu-bwmon - qcom,sc7280-cpu-bwmon - qcom,sc8280xp-cpu-bwmon - qcom,sdm845-cpu-bwmon + - qcom,sm6115-cpu-bwmon - qcom,sm6350-llcc-bwmon - qcom,sm8250-cpu-bwmon - qcom,sm8550-cpu-bwmon + - qcom,sm8650-cpu-bwmon - const: qcom,sdm845-bwmon # BWMON v4, unified register space - items: - enum: @@ -40,6 +43,7 @@ properties: - qcom,sm6350-cpu-bwmon - qcom,sm8250-llcc-bwmon - qcom,sm8550-llcc-bwmon + - qcom,sm8650-llcc-bwmon - const: qcom,sc7280-llcc-bwmon - const: qcom,sc7280-llcc-bwmon # BWMON v5 - const: qcom,sdm845-llcc-bwmon # BWMON v5 diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml index 00b570c82903..60441f0c5d72 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml @@ -11,8 +11,13 @@ maintainers: description: | This interrupt controller is found in the Loongson-3 family of chips and - Loongson-2K1000 chip, as the primary package interrupt controller which + Loongson-2K series chips, as the primary package interrupt controller which can route local I/O interrupt to interrupt lines of cores. + Be aware of the following points. + 1.The Loongson-2K0500 is a single core CPU; + 2.The Loongson-2K0500/2K1000 has 64 device interrupt sources as inputs, so we + need to define two nodes in dts{i} to describe the "0-31" and "32-61" interrupt + sources respectively. allOf: - $ref: /schemas/interrupt-controller.yaml# @@ -33,6 +38,7 @@ properties: - const: main - const: isr0 - const: isr1 + minItems: 2 interrupt-controller: true @@ -45,11 +51,9 @@ properties: interrupt-names: description: List of names for the parent interrupts. items: - - const: int0 - - const: int1 - - const: int2 - - const: int3 + pattern: int[0-3] minItems: 1 + maxItems: 4 '#interrupt-cells': const: 2 @@ -69,6 +73,7 @@ required: - compatible - reg - interrupts + - interrupt-names - interrupt-controller - '#interrupt-cells' - loongson,parent_int_map @@ -86,7 +91,8 @@ if: then: properties: reg: - minItems: 3 + minItems: 2 + maxItems: 3 required: - reg-names diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml index 86d61896f591..4bdc8321904b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml @@ -35,12 +35,16 @@ properties: - qcom,sdm845-pdc - qcom,sdx55-pdc - qcom,sdx65-pdc + - qcom,sdx75-pdc - qcom,sm4450-pdc - qcom,sm6350-pdc - qcom,sm8150-pdc - qcom,sm8250-pdc - qcom,sm8350-pdc - qcom,sm8450-pdc + - qcom,sm8550-pdc + - qcom,sm8650-pdc + - qcom,x1e80100-pdc - const: qcom,pdc reg: diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml index 2b153d7c5421..e44e4e5708a7 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml @@ -55,8 +55,8 @@ examples: - | #include <dt-bindings/interrupt-controller/irq-st.h> irq-syscfg { - compatible = "st,stih407-irq-syscfg"; - st,syscfg = <&syscfg_cpu>; + compatible = "st,stih407-irq-syscfg"; + st,syscfg = <&syscfg_cpu>; st,irq-device = <ST_IRQ_SYSCFG_PMU_0>, <ST_IRQ_SYSCFG_PMU_1>; st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>, diff --git a/Documentation/devicetree/bindings/iommu/apple,dart.yaml b/Documentation/devicetree/bindings/iommu/apple,dart.yaml index 903edf85d72e..7adb1de455a5 100644 --- a/Documentation/devicetree/bindings/iommu/apple,dart.yaml +++ b/Documentation/devicetree/bindings/iommu/apple,dart.yaml @@ -24,6 +24,7 @@ properties: compatible: enum: - apple,t8103-dart + - apple,t8103-usb4-dart - apple,t8110-dart - apple,t6000-dart diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml index aa9e1c0895a5..a4042ae24770 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml @@ -56,6 +56,8 @@ properties: - qcom,sm8350-smmu-500 - qcom,sm8450-smmu-500 - qcom,sm8550-smmu-500 + - qcom,sm8650-smmu-500 + - qcom,x1e80100-smmu-500 - const: qcom,smmu-500 - const: arm,mmu-500 @@ -89,6 +91,8 @@ properties: - qcom,sm8150-smmu-500 - qcom,sm8250-smmu-500 - qcom,sm8350-smmu-500 + - qcom,sm8450-smmu-500 + - qcom,sm8550-smmu-500 - const: qcom,adreno-smmu - const: qcom,smmu-500 - const: arm,mmu-500 @@ -434,6 +438,30 @@ allOf: compatible: items: - enum: + - qcom,sm8350-smmu-500 + - const: qcom,adreno-smmu + - const: qcom,smmu-500 + - const: arm,mmu-500 + then: + properties: + clock-names: + items: + - const: bus + - const: iface + - const: ahb + - const: hlos1_vote_gpu_smmu + - const: cx_gmu + - const: hub_cx_int + - const: hub_aon + clocks: + minItems: 7 + maxItems: 7 + + - if: + properties: + compatible: + items: + - enum: - qcom,sm6115-smmu-500 - qcom,sm6125-smmu-500 - const: qcom,adreno-smmu @@ -453,6 +481,50 @@ allOf: - description: Voter clock required for HLOS SMMU access - description: Interface clock required for register access + - if: + properties: + compatible: + const: qcom,sm8450-smmu-500 + then: + properties: + clock-names: + items: + - const: gmu + - const: hub + - const: hlos + - const: bus + - const: iface + - const: ahb + + clocks: + items: + - description: GMU clock + - description: GPU HUB clock + - description: HLOS vote clock + - description: GPU memory bus clock + - description: GPU SNoC bus clock + - description: GPU AHB clock + + - if: + properties: + compatible: + const: qcom,sm8550-smmu-500 + then: + properties: + clock-names: + items: + - const: hlos + - const: bus + - const: iface + - const: ahb + + clocks: + items: + - description: HLOS vote clock + - description: GPU memory bus clock + - description: GPU SNoC bus clock + - description: GPU AHB clock + # Disallow clocks for all other platforms with specific compatibles - if: properties: @@ -472,9 +544,8 @@ allOf: - qcom,sdx65-smmu-500 - qcom,sm6350-smmu-500 - qcom,sm6375-smmu-500 - - qcom,sm8350-smmu-500 - - qcom,sm8450-smmu-500 - - qcom,sm8550-smmu-500 + - qcom,sm8650-smmu-500 + - qcom,x1e80100-smmu-500 then: properties: clock-names: false diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml index ba9124f721f1..621dde0e45d8 100644 --- a/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml +++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml @@ -19,9 +19,14 @@ description: |+ properties: compatible: - enum: - - rockchip,iommu - - rockchip,rk3568-iommu + oneOf: + - enum: + - rockchip,iommu + - rockchip,rk3568-iommu + - items: + - enum: + - rockchip,rk3588-iommu + - const: rockchip,rk3568-iommu reg: items: diff --git a/Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml b/Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml new file mode 100644 index 000000000000..760cb336dccb --- /dev/null +++ b/Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/allwinner,sun50i-a100-ledc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A100 LED Controller + +maintainers: + - Samuel Holland <samuel@sholland.org> + +description: + The LED controller found in Allwinner sunxi SoCs uses a one-wire serial + interface to drive up to 1024 RGB LEDs. + +properties: + compatible: + oneOf: + - const: allwinner,sun50i-a100-ledc + - items: + - enum: + - allwinner,sun20i-d1-ledc + - allwinner,sun50i-r329-ledc + - const: allwinner,sun50i-a100-ledc + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus clock + - description: Module clock + + clock-names: + items: + - const: bus + - const: mod + + resets: + maxItems: 1 + + dmas: + maxItems: 1 + description: TX DMA channel + + dma-names: + const: tx + + allwinner,pixel-format: + description: Pixel format (subpixel transmission order), default is "grb" + enum: + - bgr + - brg + - gbr + - grb + - rbg + - rgb + + allwinner,t0h-ns: + default: 336 + description: Length of high pulse when transmitting a "0" bit + + allwinner,t0l-ns: + default: 840 + description: Length of low pulse when transmitting a "0" bit + + allwinner,t1h-ns: + default: 882 + description: Length of high pulse when transmitting a "1" bit + + allwinner,t1l-ns: + default: 294 + description: Length of low pulse when transmitting a "1" bit + + allwinner,treset-ns: + default: 300000 + description: Minimum delay between transmission frames + +patternProperties: + "^multi-led@[0-9a-f]+$": + type: object + $ref: leds-class-multicolor.yaml# + unevaluatedProperties: false + properties: + reg: + minimum: 0 + maximum: 1023 + description: Index of the LED in the series (must be contiguous) + + required: + - reg + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/leds/common.h> + + ledc: led-controller@2008000 { + compatible = "allwinner,sun20i-d1-ledc", + "allwinner,sun50i-a100-ledc"; + reg = <0x2008000 0x400>; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 12>, <&ccu 34>; + clock-names = "bus", "mod"; + resets = <&ccu 12>; + dmas = <&dma 42>; + dma-names = "tx"; + #address-cells = <1>; + #size-cells = <0>; + + multi-led@0 { + reg = <0x0>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_INDICATOR; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml index feb5febaf361..54d6d1f08e24 100644 --- a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml +++ b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml @@ -10,15 +10,19 @@ maintainers: - Martin Kurbanov <mmkurbanov@sberdevices.ru> description: | - This controller is present on AW20036/AW20054/AW20072. - It is a 3x12/6x9/6x12 matrix LED programmed via - an I2C interface, up to 36/54/72 LEDs or 12/18/24 RGBs, - 3 pattern controllers for auto breathing or group dimming control. + It is a matrix LED driver programmed via an I2C interface. Devices have + a set of individually controlled leds and support 3 pattern controllers + for auto breathing or group dimming control. Supported devices: + - AW20036 (3x12) 36 LEDs + - AW20054 (6x9) 54 LEDs + - AW20072 (6x12) 72 LEDs + - AW20108 (9x12) 108 LEDs For more product information please see the link below: aw20036 - https://www.awinic.com/en/productDetail/AW20036QNR#tech-docs aw20054 - https://www.awinic.com/en/productDetail/AW20054QNR#tech-docs aw20072 - https://www.awinic.com/en/productDetail/AW20072QNR#tech-docs + aw20108 - https://www.awinic.com/en/productDetail/AW20108QNR#tech-docs properties: compatible: @@ -26,6 +30,7 @@ properties: - awinic,aw20036 - awinic,aw20054 - awinic,aw20072 + - awinic,aw20108 reg: maxItems: 1 @@ -36,13 +41,11 @@ properties: "#size-cells": const: 0 - awinic,display-rows: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - Leds matrix size + enable-gpios: + maxItems: 1 patternProperties: - "^led@[0-9a-f]$": + "^led@[0-9a-f]+$": type: object $ref: common.yaml# unevaluatedProperties: false @@ -60,16 +63,11 @@ patternProperties: since the chip has a single global setting. The maximum output current of each LED is calculated by the following formula: - IMAXled = 160000 * (592 / 600.5) * (1 / display-rows) + IMAXled = 160000 * (592 / 600.5) * (1 / max-current-switch-number) And the minimum output current formula: - IMINled = 3300 * (592 / 600.5) * (1 / display-rows) - -required: - - compatible - - reg - - "#address-cells" - - "#size-cells" - - awinic,display-rows + IMINled = 3300 * (592 / 600.5) * (1 / max-current-switch-number) + where max-current-switch-number is determinated by led configuration + and depends on how leds are physically connected to the led driver. allOf: - if: @@ -78,18 +76,67 @@ allOf: contains: const: awinic,aw20036 then: + patternProperties: + "^led@[0-9a-f]+$": + properties: + reg: + items: + minimum: 0 + maximum: 36 + + - if: properties: - awinic,display-rows: - enum: [1, 2, 3] - else: + compatible: + contains: + const: awinic,aw20054 + then: + patternProperties: + "^led@[0-9a-f]+$": + properties: + reg: + items: + minimum: 0 + maximum: 54 + + - if: properties: - awinic,display-rows: - enum: [1, 2, 3, 4, 5, 6, 7] + compatible: + contains: + const: awinic,aw20072 + then: + patternProperties: + "^led@[0-9a-f]+$": + properties: + reg: + items: + minimum: 0 + maximum: 72 + + - if: + properties: + compatible: + contains: + const: awinic,aw20108 + then: + patternProperties: + "^led@[0-9a-f]+$": + properties: + reg: + items: + minimum: 0 + maximum: 108 + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" additionalProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> i2c { @@ -101,7 +148,7 @@ examples: reg = <0x3a>; #address-cells = <1>; #size-cells = <0>; - awinic,display-rows = <3>; + enable-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; led@0 { reg = <0x0>; diff --git a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml index 4191e33626f5..527a37368ed7 100644 --- a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml @@ -14,8 +14,8 @@ description: | programmable switching frequency to optimize efficiency. It supports two different dimming modes: - - analog mode, via I2C commands (default) - - PWM controlled mode. + - analog mode, via I2C commands, as default mode (32 dimming levels) + - PWM controlled mode (optional) The datasheet is available at: https://www.monolithicpower.com/en/mp3309c.html @@ -50,8 +50,6 @@ properties: required: - compatible - reg - - max-brightness - - default-brightness unevaluatedProperties: false @@ -66,8 +64,8 @@ examples: compatible = "mps,mp3309c"; reg = <0x17>; pwms = <&pwm1 0 3333333 0>; /* 300 Hz --> (1/f) * 1*10^9 */ - max-brightness = <100>; - default-brightness = <80>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness = <6>; mps,overvoltage-protection-microvolt = <24000000>; }; }; diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index c8d0ba5f2327..55a8d1385e21 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -167,7 +167,7 @@ properties: Note that this flag is mainly used for PWM-LEDs, where it is not possible to map brightness to current. Drivers for other controllers should use led-max-microamp. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 panic-indicator: description: diff --git a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml index a8736fd5a539..1ba607685f5f 100644 --- a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml +++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml @@ -89,9 +89,11 @@ additionalProperties: false examples: - | #include <dt-bindings/leds/common.h> - spmi { + + pmic { #address-cells = <1>; #size-cells = <0>; + led-controller@ee00 { compatible = "qcom,pm8350c-flash-led", "qcom,spmi-flash-led"; reg = <0xee00>; diff --git a/Documentation/devicetree/bindings/loongarch/cpus.yaml b/Documentation/devicetree/bindings/loongarch/cpus.yaml new file mode 100644 index 000000000000..f175872995e1 --- /dev/null +++ b/Documentation/devicetree/bindings/loongarch/cpus.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/loongarch/cpus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LoongArch CPUs + +maintainers: + - Binbin Zhou <zhoubinbin@loongson.cn> + +description: + This document describes the list of LoongArch CPU cores that support FDT, + it describe the layout of CPUs in a system through the "cpus" node. + +allOf: + - $ref: /schemas/cpu.yaml# + +properties: + compatible: + enum: + - loongson,la264 + - loongson,la364 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/loongson,ls2k-clk.h> + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + compatible = "loongson,la264"; + device_type = "cpu"; + reg = <0>; + clocks = <&clk LOONGSON2_NODE_CLK>; + }; + + cpu@1 { + compatible = "loongson,la264"; + device_type = "cpu"; + reg = <1>; + clocks = <&clk LOONGSON2_NODE_CLK>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/loongarch/loongson.yaml b/Documentation/devicetree/bindings/loongarch/loongson.yaml new file mode 100644 index 000000000000..e1a4a97b7576 --- /dev/null +++ b/Documentation/devicetree/bindings/loongarch/loongson.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/loongarch/loongson.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson SoC-based boards + +maintainers: + - Binbin Zhou <zhoubinbin@loongson.cn> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Loongson-2K0500 processor based boards + items: + - const: loongson,ls2k0500-ref + - const: loongson,ls2k0500 + + - description: Loongson-2K1000 processor based boards + items: + - const: loongson,ls2k1000-ref + - const: loongson,ls2k1000 + + - description: Loongson-2K2000 processor based boards + items: + - const: loongson,ls2k2000-ref + - const: loongson,ls2k2000 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml index a38413f8d132..79eb523b8436 100644 --- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml +++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml @@ -25,6 +25,24 @@ properties: - const: qcom,ipq6018-apcs-apps-global - items: - enum: + - qcom,qcs404-apcs-apps-global + - const: qcom,msm8916-apcs-kpss-global + - const: syscon + - items: + - enum: + - qcom,msm8976-apcs-kpss-global + - const: qcom,msm8994-apcs-kpss-global + - const: syscon + - items: + - enum: + - qcom,msm8998-apcs-hmss-global + - qcom,sdm660-apcs-hmss-global + - qcom,sm4250-apcs-hmss-global + - qcom,sm6115-apcs-hmss-global + - qcom,sm6125-apcs-hmss-global + - const: qcom,msm8994-apcs-kpss-global + - items: + - enum: - qcom,sc7180-apss-shared - qcom,sc8180x-apss-shared - qcom,sm8150-apss-shared @@ -34,22 +52,14 @@ properties: - qcom,msm8916-apcs-kpss-global - qcom,msm8939-apcs-kpss-global - qcom,msm8953-apcs-kpss-global - - qcom,msm8976-apcs-kpss-global - qcom,msm8994-apcs-kpss-global - - qcom,qcs404-apcs-apps-global - qcom,sdx55-apcs-gcc - const: syscon - enum: - qcom,ipq6018-apcs-apps-global - - qcom,ipq8074-apcs-apps-global - qcom,msm8996-apcs-hmss-global - - qcom,msm8998-apcs-hmss-global - qcom,qcm2290-apcs-hmss-global - - qcom,sdm660-apcs-hmss-global - qcom,sdm845-apss-shared - - qcom,sm4250-apcs-hmss-global - - qcom,sm6115-apcs-hmss-global - - qcom,sm6125-apcs-hmss-global reg: maxItems: 1 @@ -80,20 +90,38 @@ allOf: - if: properties: compatible: - enum: - - qcom,msm8916-apcs-kpss-global - - qcom,msm8939-apcs-kpss-global - - qcom,qcs404-apcs-apps-global + contains: + enum: + - qcom,msm8916-apcs-kpss-global + then: + properties: + clocks: + items: + - description: primary pll parent of the clock driver + - description: auxiliary parent + clock-names: + items: + - const: pll + - const: aux + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8939-apcs-kpss-global then: properties: clocks: items: - description: primary pll parent of the clock driver - description: auxiliary parent + - description: reference clock clock-names: items: - const: pll - const: aux + - const: ref - if: properties: @@ -113,6 +141,7 @@ allOf: - const: ref - const: pll - const: aux + - if: properties: compatible: @@ -137,16 +166,10 @@ allOf: compatible: enum: - qcom,msm8953-apcs-kpss-global - - qcom,msm8976-apcs-kpss-global - qcom,msm8994-apcs-kpss-global - qcom,msm8996-apcs-hmss-global - - qcom,msm8998-apcs-hmss-global - qcom,qcm2290-apcs-hmss-global - - qcom,sdm660-apcs-hmss-global - qcom,sdm845-apss-shared - - qcom,sm4250-apcs-hmss-global - - qcom,sm6115-apcs-hmss-global - - qcom,sm6125-apcs-hmss-global then: properties: clocks: false @@ -192,7 +215,8 @@ examples: #define GCC_APSS_AHB_CLK_SRC 1 #define GCC_GPLL0_AO_OUT_MAIN 123 apcs: mailbox@b011000 { - compatible = "qcom,qcs404-apcs-apps-global", "syscon"; + compatible = "qcom,qcs404-apcs-apps-global", + "qcom,msm8916-apcs-kpss-global", "syscon"; reg = <0x0b011000 0x1000>; #mbox-cells = <1>; clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>; diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml index a35f9483dc71..8f004868aad9 100644 --- a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml +++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml @@ -35,6 +35,7 @@ properties: - qcom,sm8450-ipcc - qcom,sm8550-ipcc - qcom,sm8650-ipcc + - qcom,x1e80100-ipcc - const: qcom,ipcc reg: diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml index 8b15a0532120..fe83b5cb1278 100644 --- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml +++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml @@ -37,7 +37,9 @@ maintainers: properties: compatible: - const: xlnx,zynqmp-ipi-mailbox + enum: + - xlnx,zynqmp-ipi-mailbox + - xlnx,versal-ipi-mailbox method: description: | @@ -58,6 +60,12 @@ properties: '#size-cells': const: 2 + reg: + maxItems: 2 + + reg-names: + maxItems: 2 + xlnx,ipi-id: description: | Remote Xilinx IPI agent ID of which the mailbox is connected to. @@ -76,7 +84,17 @@ patternProperties: properties: compatible: - const: xlnx,zynqmp-ipi-dest-mailbox + enum: + - xlnx,zynqmp-ipi-dest-mailbox + - xlnx,versal-ipi-dest-mailbox + + reg: + minItems: 1 + maxItems: 4 + + reg-names: + minItems: 1 + maxItems: 4 xlnx,ipi-id: description: @@ -88,23 +106,44 @@ patternProperties: description: It contains tx(0) or rx(1) channel IPI id number. - reg: - maxItems: 4 - - reg-names: - items: - - const: local_request_region - - const: local_response_region - - const: remote_request_region - - const: remote_response_region + allOf: + - if: + properties: + compatible: + contains: + enum: + - xlnx,zynqmp-ipi-dest-mailbox + then: + properties: + reg: + maxItems: 4 + + reg-names: + items: + - const: local_request_region + - const: local_response_region + - const: remote_request_region + - const: remote_response_region + else: + properties: + reg: + minItems: 1 + items: + - description: Remote IPI agent control register region + - description: Remote IPI agent optional message buffers + + reg-names: + minItems: 1 + items: + - const: ctrl + - const: msg required: - compatible - reg - reg-names - "#mbox-cells" - -additionalProperties: false + - xlnx,ipi-id required: - compatible @@ -113,6 +152,36 @@ required: - '#size-cells' - xlnx,ipi-id +allOf: + - if: + properties: + compatible: + contains: + enum: + - xlnx,zynqmp-ipi-mailbox + then: + properties: + reg: false + reg-names: false + + else: + properties: + reg: + items: + - description: Host IPI agent control register region + - description: Host IPI agent optional message buffers + + reg-names: + items: + - const: ctrl + - const: msg + + required: + - reg + - reg-names + +additionalProperties: false + examples: - | #include<dt-bindings/interrupt-controller/arm-gic.h> @@ -144,4 +213,41 @@ examples: }; }; + - | + #include<dt-bindings/interrupt-controller/arm-gic.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + mailbox@ff300000 { + compatible = "xlnx,versal-ipi-mailbox"; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0xff300000 0x0 0x1000>, + <0x0 0xff990000 0x0 0x1ff>; + reg-names = "ctrl", "msg"; + xlnx,ipi-id = <0>; + ranges; + + /* buffered IPI */ + mailbox@ff340000 { + compatible = "xlnx,versal-ipi-dest-mailbox"; + reg = <0x0 0xff340000 0x0 0x1000>, + <0x0 0xff990400 0x0 0x1ff>; + reg-names = "ctrl", "msg"; + #mbox-cells = <1>; + xlnx,ipi-id = <4>; + }; + + /* bufferless IPI */ + mailbox@ff370000 { + compatible = "xlnx,versal-ipi-dest-mailbox"; + reg = <0x0 0xff370000 0x0 0x1000>; + reg-names = "ctrl"; + #mbox-cells = <1>; + xlnx,ipi-id = <7>; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/media/cnm,wave521c.yaml b/Documentation/devicetree/bindings/media/cnm,wave521c.yaml index 6d5569e77b7a..6a11c1d11fb5 100644 --- a/Documentation/devicetree/bindings/media/cnm,wave521c.yaml +++ b/Documentation/devicetree/bindings/media/cnm,wave521c.yaml @@ -17,7 +17,7 @@ properties: compatible: items: - enum: - - ti,k3-j721s2-wave521c + - ti,j721s2-wave521c - const: cnm,wave521c reg: @@ -53,7 +53,7 @@ additionalProperties: false examples: - | vpu: video-codec@12345678 { - compatible = "ti,k3-j721s2-wave521c", "cnm,wave521c"; + compatible = "ti,j721s2-wave521c", "cnm,wave521c"; reg = <0x12345678 0x1000>; clocks = <&clks 42>; interrupts = <42>; diff --git a/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml b/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml index d66e51547482..b46cc780703c 100644 --- a/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml +++ b/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml @@ -50,7 +50,9 @@ properties: iommu-names: minItems: 1 - maxItems: 2 + items: + - const: left + - const: right power-domains: maxItems: 1 @@ -85,7 +87,7 @@ allOf: - const: sclk_mfc iommus: maxItems: 1 - iommus-names: false + iommu-names: false - if: properties: @@ -103,11 +105,9 @@ allOf: - const: aclk - const: aclk_xiu iommus: - maxItems: 2 - iommus-names: - items: - - const: left - - const: right + minItems: 2 + iommu-names: + minItems: 2 - if: properties: @@ -124,11 +124,9 @@ allOf: - const: mfc - const: sclk_mfc iommus: - maxItems: 2 - iommus-names: - items: - - const: left - - const: right + minItems: 2 + iommu-names: + minItems: 2 - if: properties: @@ -145,11 +143,9 @@ allOf: items: - const: mfc iommus: - maxItems: 2 - iommus-names: - items: - - const: left - - const: right + minItems: 2 + iommu-names: + minItems: 2 - if: properties: @@ -162,9 +158,6 @@ allOf: clocks: minItems: 1 maxItems: 2 - iommus: - minItems: 1 - maxItems: 2 - if: properties: diff --git a/Documentation/devicetree/bindings/mfd/ams,as3711.yaml b/Documentation/devicetree/bindings/mfd/ams,as3711.yaml new file mode 100644 index 000000000000..ad8649cbb2cc --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ams,as3711.yaml @@ -0,0 +1,223 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ams,as3711.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Austria MicroSystems AS3711 Quad Buck High Current PMIC with Charger + +maintainers: + - Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> + +description: + AS3711 is an I2C PMIC from Austria MicroSystems with multiple DC/DC and LDO + power supplies, a battery charger and an RTC. So far only bindings for the + two step-up DC/DC converters are defined. + +properties: + compatible: + const: ams,as3711 + + reg: + maxItems: 1 + + backlight: + description: + Step-up converter configuration, to be used as a backlight source + type: object + additionalProperties: false + properties: + compatible: + const: ams,as3711-bl + + su1-dev: + description: Framebuffer phandle for the first step-up converter + $ref: /schemas/types.yaml#/definitions/phandle + + su1-max-uA: + description: Maximum current for the first step-up converter + $ref: /schemas/types.yaml#/definitions/uint32 + + su2-dev: + description: Framebuffer phandle for the second step-up converter + $ref: /schemas/types.yaml#/definitions/phandle + + su2-max-uA: + description: Maximum current for the second step-up converter + $ref: /schemas/types.yaml#/definitions/uint32 + + su2-feedback-voltage: + description: Second step-up converter uses voltage feedback + type: boolean + + su2-feedback-curr1: + description: + Second step-up converter uses CURR1 input for current feedback + type: boolean + + su2-feedback-curr2: + description: + Second step-up converter uses CURR2 input for current feedback + type: boolean + + su2-feedback-curr3: + description: + Second step-up converter uses CURR3 input for current feedback + type: boolean + + su2-feedback-curr-auto: + description: + Second step-up converter uses automatic current feedback selection + type: boolean + + su2-fbprot-lx-sd4: + description: + Second step-up converter uses LX_SD4 for over-voltage protection + type: boolean + + su2-fbprot-gpio2: + description: + Second step-up converter uses GPIO2 for over-voltage protection + type: boolean + + su2-fbprot-gpio3: + description: + Second step-up converter uses GPIO3 for over-voltage protection + type: boolean + + su2-fbprot-gpio4: + description: + Second step-up converter uses GPIO4 for over-voltage protection + type: boolean + + su2-auto-curr1: + description: + Second step-up converter uses CURR1 input for automatic current + feedback + type: boolean + + su2-auto-curr2: + description: + Second step-up converter uses CURR2 input for automatic current + feedback + type: boolean + + su2-auto-curr3: + description: + Second step-up converter uses CURR3 input for automatic current + feedback + type: boolean + + required: + - compatible + + dependentRequired: + # To use the SU1 converter as a backlight source the following two + # properties must be provided: + su1-dev: [ su1-max-uA ] + su1-max-uA: [ su1-dev ] + + # To use the SU2 converter as a backlight source the following two + # properties must be provided: + su2-dev: [ su2-max-uA ] + su2-max-uA: [ su2-dev ] + + su2-feedback-voltage: [ su2-dev ] + su2-feedback-curr1: [ su2-dev ] + su2-feedback-curr2: [ su2-dev ] + su2-feedback-curr3: [ su2-dev ] + su2-feedback-curr-auto: [ su2-dev ] + su2-fbprot-lx-sd4: [ su2-dev ] + su2-fbprot-gpio2: [ su2-dev ] + su2-fbprot-gpio3: [ su2-dev ] + su2-fbprot-gpio4: [ su2-dev ] + su2-auto-curr1: [ su2-feedback-curr-auto ] + su2-auto-curr2: [ su2-feedback-curr-auto ] + su2-auto-curr3: [ su2-feedback-curr-auto ] + + dependentSchemas: + su2-dev: + allOf: + - oneOf: + - required: + - su2-feedback-voltage + - required: + - su2-feedback-curr1 + - required: + - su2-feedback-curr2 + - required: + - su2-feedback-curr3 + - required: + - su2-feedback-curr-auto + - oneOf: + - required: + - su2-fbprot-lx-sd4 + - required: + - su2-fbprot-gpio2 + - required: + - su2-fbprot-gpio3 + - required: + - su2-fbprot-gpio4 + + su2-feedback-curr-auto: + anyOf: + - required: + - su2-auto-curr1 + - required: + - su2-auto-curr2 + - required: + - su2-auto-curr3 + + regulators: + description: Other DC/DC and LDO supplies + type: object + unevaluatedProperties: false + patternProperties: + "^(sd[1-4]|ldo[1-8])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@40 { + compatible = "ams,as3711"; + reg = <0x40>; + + regulators { + sd4 { + regulator-name = "1.215V"; + regulator-min-microvolt = <1215000>; + regulator-max-microvolt = <1235000>; + }; + ldo2 { + regulator-name = "2.8V CPU"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + }; + + backlight { + compatible = "ams,as3711-bl"; + su2-dev = <&lcdc>; + su2-max-uA = <36000>; + su2-feedback-curr-auto; + su2-fbprot-gpio4; + su2-auto-curr1; + su2-auto-curr2; + su2-auto-curr3; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/as3711.txt b/Documentation/devicetree/bindings/mfd/as3711.txt deleted file mode 100644 index d98cf18c721c..000000000000 --- a/Documentation/devicetree/bindings/mfd/as3711.txt +++ /dev/null @@ -1,73 +0,0 @@ -AS3711 is an I2C PMIC from Austria MicroSystems with multiple DCDC and LDO power -supplies, a battery charger and an RTC. So far only bindings for the two stepup -DCDC converters are defined. Other DCDC and LDO supplies are configured, using -standard regulator properties, they must belong to a sub-node, called -"regulators" and be called "sd1" to "sd4" and "ldo1" to "ldo8." Stepup converter -configuration should be placed in a subnode, called "backlight." - -Compulsory properties: -- compatible : must be "ams,as3711" -- reg : specifies the I2C address - -To use the SU1 converter as a backlight source the following two properties must -be provided: -- su1-dev : framebuffer phandle -- su1-max-uA : maximum current - -To use the SU2 converter as a backlight source the following two properties must -be provided: -- su2-dev : framebuffer phandle -- su1-max-uA : maximum current - -Additionally one of these properties must be provided to select the type of -feedback used: -- su2-feedback-voltage : voltage feedback is used -- su2-feedback-curr1 : CURR1 input used for current feedback -- su2-feedback-curr2 : CURR2 input used for current feedback -- su2-feedback-curr3 : CURR3 input used for current feedback -- su2-feedback-curr-auto: automatic current feedback selection - -and one of these to select the over-voltage protection pin -- su2-fbprot-lx-sd4 : LX_SD4 is used for over-voltage protection -- su2-fbprot-gpio2 : GPIO2 is used for over-voltage protection -- su2-fbprot-gpio3 : GPIO3 is used for over-voltage protection -- su2-fbprot-gpio4 : GPIO4 is used for over-voltage protection - -If "su2-feedback-curr-auto" is selected, one or more of the following properties -have to be specified: -- su2-auto-curr1 : use CURR1 input for current feedback -- su2-auto-curr2 : use CURR2 input for current feedback -- su2-auto-curr3 : use CURR3 input for current feedback - -Example: - -as3711@40 { - compatible = "ams,as3711"; - reg = <0x40>; - - regulators { - sd4 { - regulator-name = "1.215V"; - regulator-min-microvolt = <1215000>; - regulator-max-microvolt = <1235000>; - }; - ldo2 { - regulator-name = "2.8V CPU"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; - }; - - backlight { - compatible = "ams,as3711-bl"; - su2-dev = <&lcdc>; - su2-max-uA = <36000>; - su2-feedback-curr-auto; - su2-fbprot-gpio4; - su2-auto-curr1; - su2-auto-curr2; - su2-auto-curr3; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml index bdff5b653453..6a824351834e 100644 --- a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml @@ -17,7 +17,7 @@ description: | node. The SPMI controller part is provided by - Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml + Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml properties: $nodename: @@ -42,13 +42,6 @@ properties: additionalProperties: false - properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - patternProperties: '^ldo[0-9]+$': type: object @@ -66,72 +59,75 @@ additionalProperties: false examples: - | + #include <dt-bindings/spmi/spmi.h> - pmic: pmic@0 { - compatible = "hisilicon,hi6421v600-spmi"; - reg = <0 0>; - - #interrupt-cells = <2>; - interrupt-controller; - interrupt-parent = <&gpio28>; - interrupts = <0 0>; - - regulators { - #address-cells = <1>; + spmi { + #address-cells = <2>; #size-cells = <0>; - ldo3: ldo3 { - regulator-name = "ldo3"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <2000000>; - regulator-boot-on; - }; - - ldo4: ldo4 { - regulator-name = "ldo4"; - regulator-min-microvolt = <1725000>; - regulator-max-microvolt = <1900000>; - regulator-boot-on; - }; - - ldo9: ldo9 { - regulator-name = "ldo9"; - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - - ldo15: ldo15 { - regulator-name = "ldo15"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - ldo16: ldo16 { - regulator-name = "ldo16"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - }; - - ldo17: ldo17 { - regulator-name = "ldo17"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - }; - - ldo33: ldo33 { - regulator-name = "ldo33"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - - ldo34: ldo34 { - regulator-name = "ldo34"; - regulator-min-microvolt = <2600000>; - regulator-max-microvolt = <3300000>; + pmic@0 { + compatible = "hisilicon,hi6421v600-spmi"; + reg = <0 SPMI_USID>; + + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio28>; + interrupts = <0 0>; + + regulators { + ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + }; + + ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + }; + + ldo9 { + regulator-name = "ldo9"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo15 { + regulator-name = "ldo15"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo16 { + regulator-name = "ldo16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + }; + + ldo17 { + regulator-name = "ldo17"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + ldo33 { + regulator-name = "ldo33"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo34 { + regulator-name = "ldo34"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + }; + }; }; - }; }; diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml index 9e4eed34dae8..0c75d8bde568 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml @@ -99,10 +99,12 @@ examples: - | #include <dt-bindings/mfd/qcom-pm8008.h> #include <dt-bindings/interrupt-controller/irq.h> - qupv3_se13_i2c { + + i2c { #address-cells = <1>; #size-cells = <0>; - pm8008i@8 { + + pmic@8 { compatible = "qcom,pm8008"; reg = <0x8>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml index 9fa568603930..8103fb61a16c 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml @@ -66,6 +66,7 @@ properties: - qcom,pm8841 - qcom,pm8909 - qcom,pm8916 + - qcom,pm8937 - qcom,pm8941 - qcom,pm8950 - qcom,pm8953 @@ -134,9 +135,15 @@ patternProperties: type: object $ref: /schemas/sound/qcom,pm8916-wcd-analog-codec.yaml# + "^battery@[0-9a-f]+$": + type: object + oneOf: + - $ref: /schemas/power/supply/qcom,pm8916-bms-vm.yaml# + "^charger@[0-9a-f]+$": type: object oneOf: + - $ref: /schemas/power/supply/qcom,pm8916-lbc.yaml# - $ref: /schemas/power/supply/qcom,pm8941-charger.yaml# - $ref: /schemas/power/supply/qcom,pm8941-coincell.yaml# - $ref: /schemas/power/supply/qcom,pmi8998-charger.yaml# diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml index 33c3d023a106..798705ab6a46 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml @@ -29,6 +29,8 @@ properties: - qcom,sdx65-tcsr - qcom,sm4450-tcsr - qcom,sm8150-tcsr + - qcom,sm8250-tcsr + - qcom,sm8350-tcsr - qcom,sm8450-tcsr - qcom,tcsr-apq8064 - qcom,tcsr-apq8084 diff --git a/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml b/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml index 996bd4a17ca3..a750fa23d7e7 100644 --- a/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml +++ b/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml @@ -19,7 +19,9 @@ description: properties: compatible: items: - - const: sprd,ums512-glbregs + - enum: + - sprd,ums512-glbregs + - sprd,ums9620-glbregs - const: syscon - const: simple-mfd diff --git a/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml b/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml index 23a63265be3c..70b5dfce07d2 100644 --- a/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml @@ -61,8 +61,6 @@ required: - interrupts - clocks - clock-names - - dmas - - dma-names additionalProperties: false diff --git a/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml b/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml index 8cc951feb7df..59b83ea5e05e 100644 --- a/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml +++ b/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml @@ -12,7 +12,7 @@ maintainers: properties: compatible: - const: "fsl,dpaa2-console" + const: fsl,dpaa2-console reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml index 2459a55ed540..940b12688167 100644 --- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml +++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml @@ -203,7 +203,7 @@ examples: bus-width = <4>; cap-sd-highspeed; cap-mmc-highspeed; - cd-gpios = <&gpio2 31 0x4>; + cd-gpios = <&gpio2 31 0x4>; st,sig-dir-dat0; st,sig-dir-dat2; st,sig-dir-cmd; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml index 09455f9fa8de..4869ddef36fd 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml @@ -18,7 +18,7 @@ allOf: const: marvell,armada-380-sdhci then: properties: - regs: + reg: minItems: 3 reg-names: minItems: 3 @@ -26,7 +26,7 @@ allOf: - reg-names else: properties: - regs: + reg: maxItems: 1 reg-names: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml index 973e478a399d..bf6cbc7c2ba3 100644 --- a/Documentation/devicetree/bindings/net/sff,sfp.yaml +++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml @@ -120,7 +120,7 @@ examples: pinctrl-names = "default"; pinctrl-0 = <&cps_sfpp0_pins>; tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>; - tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>; }; mdio { diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml index a69de3e92282..92bfe25f0571 100644 --- a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml +++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml @@ -24,6 +24,7 @@ properties: - st,stm32f4-otp - st,stm32mp13-bsec - st,stm32mp15-bsec + - st,stm32mp25-bsec reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml index 7e15aae7d69e..22491f7f8852 100644 --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -64,6 +64,24 @@ properties: aspm-no-l0s: true + brcm,clkreq-mode: + description: A string that determines the operating + clkreq mode of the PCIe RC HW with respect to controlling the refclk + signal. There are three different modes -- "safe", which drives the + refclk signal unconditionally and will work for all devices but does + not provide any power savings; "no-l1ss" -- which provides Clock + Power Management, L0s, and L1, but cannot provide L1 substate (L1SS) + power savings. If the downstream device connected to the RC is L1SS + capable AND the OS enables L1SS, all PCIe traffic may abruptly halt, + potentially hanging the system; "default" -- which provides L0s, L1, + and L1SS, but not compliant to provide Clock Power Management; + specifically, may not be able to meet the T_CLRon max timing of 400ns + as specified in "Dynamic Clock Control", section 3.2.5.2.2 PCI + Express Mini CEM 2.1 specification. This situation is atypical and + should happen only with older devices. + $ref: /schemas/types.yaml#/definitions/string + enum: [ safe, no-l1ss, default ] + brcm,scb-sizes: description: u64 giving the 64bit PCIe memory viewport size of a memory controller. There may be up to diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml index eadba38171e1..a93ab3b54066 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml @@ -42,6 +42,10 @@ properties: - qcom,pcie-sm8450-pcie1 - qcom,pcie-sm8550 - items: + - enum: + - qcom,pcie-sm8650 + - const: qcom,pcie-sm8550 + - items: - const: qcom,pcie-msm8998 - const: qcom,pcie-msm8996 @@ -62,7 +66,8 @@ properties: maxItems: 8 iommu-map: - maxItems: 2 + minItems: 1 + maxItems: 16 # Common definitions for clocks, clock-names and reset. # Platform constraints are described later. @@ -88,7 +93,7 @@ properties: minItems: 1 maxItems: 12 - resets-names: + reset-names: minItems: 1 maxItems: 12 @@ -483,6 +488,33 @@ allOf: compatible: contains: enum: + - qcom,pcie-sc8180x + then: + properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ref # REFERENCE clock + - const: tbu # PCIe TBU clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: - qcom,pcie-sdm845 then: oneOf: @@ -526,8 +558,33 @@ allOf: compatible: contains: enum: - - qcom,pcie-sc8180x - qcom,pcie-sm8150 + then: + properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ref # REFERENCE clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: - qcom,pcie-sm8250 then: oneOf: diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml index 8fdfbc763d70..b6a7cb32f61e 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml @@ -68,6 +68,15 @@ properties: phy-names: const: pcie + vpcie1v5-supply: + description: The 1.5v regulator to use for PCIe. + + vpcie3v3-supply: + description: The 3.3v regulator to use for PCIe. + + vpcie12v-supply: + description: The 12v regulator to use for PCIe. + required: - compatible - reg @@ -121,5 +130,7 @@ examples: clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; resets = <&cpg 319>; + vpcie3v3-supply = <&pcie_3v3>; + vpcie12v-supply = <&pcie_12v>; }; }; diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml index 1ae8dcfa072c..5f719218c472 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml @@ -49,6 +49,7 @@ properties: - description: APB clock for PCIe - description: Auxiliary clock for PCIe - description: PIPE clock + - description: Reference clock for PCIe clock-names: minItems: 5 @@ -59,6 +60,7 @@ properties: - const: pclk - const: aux - const: pipe + - const: ref interrupts: items: diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml index 62292185fe2e..97f2579ea908 100644 --- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml @@ -10,13 +10,11 @@ title: TI J721E PCI EP (PCIe Wrapper) maintainers: - Kishon Vijay Abraham I <kishon@ti.com> -allOf: - - $ref: cdns-pcie-ep.yaml# - properties: compatible: oneOf: - const: ti,j721e-pcie-ep + - const: ti,j784s4-pcie-ep - description: PCIe EP controller in AM64 items: - const: ti,am64-pcie-ep @@ -65,6 +63,41 @@ properties: items: - const: link_state +allOf: + - $ref: cdns-pcie-ep.yaml# + - if: + properties: + compatible: + enum: + - ti,am64-pcie-ep + then: + properties: + num-lanes: + const: 1 + + - if: + properties: + compatible: + enum: + - ti,j7200-pcie-ep + - ti,j721e-pcie-ep + then: + properties: + num-lanes: + minimum: 1 + maximum: 2 + + - if: + properties: + compatible: + enum: + - ti,j784s4-pcie-ep + then: + properties: + num-lanes: + minimum: 1 + maximum: 4 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml index a2c5eaea57f5..b7a534cef24d 100644 --- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml @@ -10,13 +10,11 @@ title: TI J721E PCI Host (PCIe Wrapper) maintainers: - Kishon Vijay Abraham I <kishon@ti.com> -allOf: - - $ref: cdns-pcie-host.yaml# - properties: compatible: oneOf: - const: ti,j721e-pcie-host + - const: ti,j784s4-pcie-host - description: PCIe controller in AM64 items: - const: ti,am64-pcie-host @@ -94,6 +92,41 @@ properties: interrupts: maxItems: 1 +allOf: + - $ref: cdns-pcie-host.yaml# + - if: + properties: + compatible: + enum: + - ti,am64-pcie-host + then: + properties: + num-lanes: + const: 1 + + - if: + properties: + compatible: + enum: + - ti,j7200-pcie-host + - ti,j721e-pcie-host + then: + properties: + num-lanes: + minimum: 1 + maximum: 2 + + - if: + properties: + compatible: + enum: + - ti,j784s4-pcie-host + then: + properties: + num-lanes: + minimum: 1 + maximum: 4 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml index 53da2edd7c9a..120e3bb1e545 100644 --- a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml @@ -83,7 +83,7 @@ examples: <0x0 0x28050000 0x0 0x00010000>, <0x0 0x24200000 0x0 0x00002000>, <0x0 0x24162000 0x0 0x00001000>; - reg-names = "dbi", "config", "ulreg", "smu", "mpu"; + reg-names = "dbi", "config", "ulreg", "smu", "mpu"; device_type = "pci"; bus-range = <0x00 0xff>; num-lanes = <2>; diff --git a/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml index c8c83acfb871..81c2654b7e57 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml @@ -16,20 +16,8 @@ properties: "#phy-cells": const: 0 - reg: - maxItems: 1 - required: - compatible - - reg - "#phy-cells" additionalProperties: false - -examples: - - | - phy@0 { - compatible = "amlogic,g12a-mipi-dphy-analog"; - reg = <0x0 0xc>; - #phy-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml index 009a39808318..70def36e5688 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml @@ -9,16 +9,6 @@ title: Amlogic AXG shared MIPI/PCIE analog PHY maintainers: - Remi Pommarel <repk@triplefau.lt> -description: |+ - The Everything-Else Power Domains node should be the child of a syscon - node with the required property: - - - compatible: Should be the following: - "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon" - - Refer to the bindings described in - Documentation/devicetree/bindings/mfd/syscon.yaml - properties: compatible: const: amlogic,axg-mipi-pcie-analog-phy @@ -31,10 +21,3 @@ required: - "#phy-cells" additionalProperties: false - -examples: - - | - mpphy: phy { - compatible = "amlogic,axg-mipi-pcie-analog-phy"; - #phy-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml index 6703689fcdbe..f6e494d0d89b 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml @@ -31,6 +31,7 @@ properties: - items: - enum: - mediatek,mt8188-mipi-tx + - mediatek,mt8195-mipi-tx - mediatek,mt8365-mipi-tx - const: mediatek,mt8183-mipi-tx - const: mediatek,mt2701-mipi-tx diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml index 2bb91542e984..acba0720125d 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -235,6 +235,15 @@ patternProperties: Specify the flag to enable BC1.2 if support it type: boolean + mediatek,force-mode: + description: + The force mode is used to manually switch the shared phy mode between + USB3 and PCIe, when USB3 phy type is selected by the consumer, and + force-mode is set, will cause phy's power and pipe toggled and force + phy as USB3 mode which switched from default PCIe mode. But perfer to + use the property "mediatek,syscon-type" for newer SoCs that support it. + type: boolean + mediatek,syscon-type: $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml index 2c3d6553a7ba..6c03f2d5fca3 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml @@ -36,6 +36,8 @@ properties: - qcom,sm8450-qmp-gen4x2-pcie-phy - qcom,sm8550-qmp-gen3x2-pcie-phy - qcom,sm8550-qmp-gen4x2-pcie-phy + - qcom,sm8650-qmp-gen3x2-pcie-phy + - qcom,sm8650-qmp-gen4x2-pcie-phy reg: minItems: 1 @@ -147,6 +149,8 @@ allOf: - qcom,sm8450-qmp-gen3x2-pcie-phy - qcom,sm8550-qmp-gen3x2-pcie-phy - qcom,sm8550-qmp-gen4x2-pcie-phy + - qcom,sm8650-qmp-gen3x2-pcie-phy + - qcom,sm8650-qmp-gen4x2-pcie-phy then: properties: clocks: @@ -189,6 +193,7 @@ allOf: contains: enum: - qcom,sm8550-qmp-gen4x2-pcie-phy + - qcom,sm8650-qmp-gen4x2-pcie-phy then: properties: resets: diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml index f3a3296c811c..8474eef8d0ff 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml @@ -32,6 +32,7 @@ properties: - qcom,sm8350-qmp-ufs-phy - qcom,sm8450-qmp-ufs-phy - qcom,sm8550-qmp-ufs-phy + - qcom,sm8650-qmp-ufs-phy reg: maxItems: 1 @@ -112,6 +113,7 @@ allOf: - qcom,sm8250-qmp-ufs-phy - qcom,sm8350-qmp-ufs-phy - qcom,sm8550-qmp-ufs-phy + - qcom,sm8650-qmp-ufs-phy then: properties: clocks: diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml index 57702f7f2a46..15d82c67f157 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml @@ -32,6 +32,7 @@ properties: - qcom,sm8150-qmp-usb3-uni-phy - qcom,sm8250-qmp-usb3-uni-phy - qcom,sm8350-qmp-usb3-uni-phy + - qcom,x1e80100-qmp-usb3-uni-phy reg: @@ -135,6 +136,7 @@ allOf: - qcom,sm8150-qmp-usb3-uni-phy - qcom,sm8250-qmp-usb3-uni-phy - qcom,sm8350-qmp-usb3-uni-phy + - qcom,x1e80100-qmp-usb3-uni-phy then: properties: clocks: @@ -171,6 +173,7 @@ allOf: enum: - qcom,sa8775p-qmp-usb3-uni-phy - qcom,sc8280xp-qmp-usb3-uni-phy + - qcom,x1e80100-qmp-usb3-uni-phy then: required: - power-domains diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml index 9af203dc8793..2d0d7e9e6431 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml @@ -27,6 +27,8 @@ properties: - qcom,sm8350-qmp-usb3-dp-phy - qcom,sm8450-qmp-usb3-dp-phy - qcom,sm8550-qmp-usb3-dp-phy + - qcom,sm8650-qmp-usb3-dp-phy + - qcom,x1e80100-qmp-usb3-dp-phy reg: maxItems: 1 @@ -62,12 +64,12 @@ properties: "#clock-cells": const: 1 description: - See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h + See include/dt-bindings/phy/phy-qcom-qmp.h "#phy-cells": const: 1 description: - See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h + See include/dt-bindings/phy/phy-qcom-qmp.h orientation-switch: description: @@ -128,6 +130,8 @@ allOf: - qcom,sc8280xp-qmp-usb43dp-phy - qcom,sm6350-qmp-usb3-dp-phy - qcom,sm8550-qmp-usb3-dp-phy + - qcom,sm8650-qmp-usb3-dp-phy + - qcom,x1e80100-qmp-usb3-dp-phy then: required: - power-domains diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml index c95828607ab6..b82f7f5731ed 100644 --- a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml @@ -18,6 +18,8 @@ properties: - items: - enum: - qcom,sdx75-snps-eusb2-phy + - qcom,sm8650-snps-eusb2-phy + - qcom,x1e80100-snps-eusb2-phy - const: qcom,sm8550-snps-eusb2-phy - const: qcom,sm8550-snps-eusb2-phy diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml index 45a307d3ce16..c11495524dd2 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml @@ -31,6 +31,7 @@ properties: - ti,omap3-padconf - ti,omap4-padconf - ti,omap5-padconf + - ti,j7200-padconf - const: pinctrl-single reg: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml index fad0118fd521..23300606547c 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml @@ -23,13 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 24 @@ -95,7 +88,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml index 3d3086ae1ba6..e571cd64418f 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml @@ -26,13 +26,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 27 @@ -100,7 +93,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml index 7c3e5e043f07..ed00fbaec11b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml @@ -22,12 +22,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - patternProperties: "-state$": oneOf: @@ -100,7 +94,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml index e053fbd588b5..6f90dbbdbdcc 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml @@ -23,13 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 35 @@ -103,7 +96,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml index e5e9962b2174..bca903b5da6d 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml @@ -23,13 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 33 @@ -97,7 +90,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml new file mode 100644 index 000000000000..3b5045730471 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SoC LPASS LPI TLMM Common Properties + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Common properties for the Top Level Mode Multiplexer pin controllers in the + Low Power Audio SubSystem (LPASS) Low Power Island (LPI) of Qualcomm SoCs. + +properties: + gpio-controller: true + + "#gpio-cells": + description: + Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +required: + - gpio-controller + - "#gpio-cells" + - gpio-ranges + +allOf: + - $ref: pinctrl.yaml# + +additionalProperties: true + +$defs: + qcom-tlmm-state: + properties: + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-bus-hold: true + bias-pull-down: true + bias-pull-up: true + bias-disable: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + - function + + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + additionalProperties: true + diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml index 5ece3b9d676b..bd3cbb44c99a 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml @@ -25,19 +25,7 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true gpio-reserved-ranges: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg - -additionalProperties: false patternProperties: "-state$": @@ -110,6 +98,12 @@ $defs: required: - pins +required: + - compatible + - reg + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml index 5885aee95c98..299e0b4b0ab4 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml @@ -23,18 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - '#interrupt-cells': true - gpio-controller: true - '#gpio-cells': true - gpio-ranges: true - -required: - - compatible - - reg - -additionalProperties: false - patternProperties: "-state$": oneOf: @@ -74,6 +62,12 @@ $defs: required: - pins +required: + - compatible + - reg + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml index a602bf0d27fb..68d3fa2105b8 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml @@ -23,12 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - gpio-reserved-ranges: maxItems: 1 @@ -82,7 +76,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml index a05971611780..61f5be21f30c 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml @@ -23,13 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 86 @@ -92,7 +85,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml index 5095e86fe9a2..295dd5fcf4c3 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml @@ -25,19 +25,7 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true gpio-reserved-ranges: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg - -additionalProperties: false patternProperties: "-state$": @@ -108,6 +96,12 @@ $defs: required: - pins +required: + - compatible + - reg + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml index 063d004967bb..904af87f9eaf 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml @@ -23,13 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 61 @@ -114,7 +107,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml index 798aac9e6e31..8a3a962f6c00 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml @@ -22,12 +22,7 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true gpio-reserved-ranges: true - "#gpio-cells": true - gpio-ranges: true patternProperties: "-state$": @@ -117,7 +112,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml index 9172b50f7a98..46618740bd31 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml @@ -23,13 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 76 @@ -108,7 +101,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml index 8a3be65c51ed..840fdaabde12 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml @@ -23,13 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 73 @@ -124,7 +117,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml index ca95de0b87a6..d4391c194ff7 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml @@ -23,13 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 73 @@ -104,7 +97,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml index 41525ecfa8e3..fa90981db40b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml @@ -25,13 +25,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 73 @@ -114,7 +107,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml index 59d406b60957..c5010c175b23 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml @@ -23,13 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 75 @@ -133,7 +126,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml index bd6d7caf499a..bcaa231adaf7 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml @@ -23,13 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 75 @@ -118,7 +111,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml index 80f960671857..fe717d8d4798 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml @@ -158,34 +158,40 @@ examples: - | #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> - pm8841_mpp: mpps@a000 { - compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp"; - reg = <0xa000 0>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pm8841_mpp 0 0 4>; - gpio-line-names = "VDD_PX_BIAS", "WLAN_LED_CTRL", - "BT_LED_CTRL", "GPIO-F"; - interrupt-controller; - #interrupt-cells = <2>; - - pinctrl-names = "default"; - pinctrl-0 = <&pm8841_default>; - - mpp1-state { - pins = "mpp1"; - function = "digital"; - input-enable; - power-source = <PM8841_MPP_S3>; - }; - - default-state { - gpio-pins { - pins = "mpp1", "mpp2", "mpp3", "mpp4"; - function = "digital"; - input-enable; - power-source = <PM8841_MPP_S3>; + pmic { + #address-cells = <1>; + #size-cells = <0>; + + pm8841_mpp: mpps@a000 { + compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp"; + reg = <0xa000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8841_mpp 0 0 4>; + gpio-line-names = "VDD_PX_BIAS", "WLAN_LED_CTRL", + "BT_LED_CTRL", "GPIO-F"; + interrupt-controller; + #interrupt-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pm8841_default>; + + mpp1-state { + pins = "mpp1"; + function = "digital"; + input-enable; + power-source = <PM8841_MPP_S3>; + }; + + default-state { + gpio-pins { + pins = "mpp1", "mpp2", "mpp3", "mpp4"; + function = "digital"; + input-enable; + power-source = <PM8841_MPP_S3>; + }; + }; }; - }; }; ... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml index c323f6d495a4..e123beb33aef 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml @@ -22,13 +22,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - patternProperties: "-state$": oneOf: @@ -92,7 +85,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml index b1b9cd319e50..4009501b3414 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml @@ -29,13 +29,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 60 @@ -130,7 +123,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml index 237cac4f6ce1..88afeae530c6 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml @@ -23,10 +23,8 @@ properties: reg: maxItems: 1 - interrupts: true - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true + interrupts: + maxItems: 1 gpio-reserved-ranges: minItems: 1 @@ -35,10 +33,6 @@ properties: gpio-line-names: maxItems: 151 - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - patternProperties: "-state$": oneOf: @@ -101,7 +95,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml index 2173c5255638..e9abbf2c0689 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml @@ -22,13 +22,8 @@ properties: reg: maxItems: 1 - interrupts: true - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true + interrupts: + maxItems: 1 gpio-reserved-ranges: minItems: 1 @@ -37,12 +32,6 @@ properties: gpio-line-names: maxItems: 148 -required: - - compatible - - reg - -additionalProperties: false - patternProperties: "-state$": oneOf: @@ -108,6 +97,12 @@ $defs: required: - pins +required: + - compatible + - reg + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml index 573e459b1c44..5606f2136ad1 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml @@ -29,13 +29,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 60 @@ -112,7 +105,7 @@ required: - reg - reg-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml index 00c5a00e35fc..08801cc4e476 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml @@ -20,16 +20,6 @@ properties: reg: maxItems: 2 - gpio-controller: true - - "#gpio-cells": - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - patternProperties: "-state$": oneOf: @@ -45,7 +35,8 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: /schemas/pinctrl/pincfg-node.yaml + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -68,42 +59,14 @@ $defs: Specify the alternative function to be configured for the specified pins. - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - slew-rate: - enum: [0, 1, 2, 3] - default: 0 - description: | - 0: No adjustments - 1: Higher Slew rate (faster edges) - 2: Lower Slew rate (slower edges) - 3: Reserved (No adjustments) - - bias-pull-down: true - bias-pull-up: true - bias-bus-hold: true - bias-disable: true - output-high: true - output-low: true - - required: - - pins - - function - - additionalProperties: false - required: - compatible - reg - - gpio-controller - - "#gpio-cells" - - gpio-ranges -additionalProperties: false +allOf: + - $ref: qcom,lpass-lpi-common.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml index c8735ab97e40..5329fe2a4397 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml @@ -23,24 +23,6 @@ properties: description: Specifies the TLMM summary IRQ maxItems: 1 - interrupt-controller: true - - '#interrupt-cells': - description: - Specifies the PIN numbers and Flags, as defined in defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - - gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - gpio-reserved-ranges: minItems: 1 maxItems: 88 @@ -48,8 +30,6 @@ properties: gpio-line-names: maxItems: 175 - wakeup-parent: true - patternProperties: "-state$": oneOf: @@ -124,14 +104,8 @@ allOf: required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges - -additionalProperties: false + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml index b086a5184235..c122bb849f0f 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml @@ -31,20 +31,7 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - '#interrupt-cells': true - gpio-controller: true gpio-reserved-ranges: true - '#gpio-cells': true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg - - reg-names - -additionalProperties: false patternProperties: "-state$": @@ -106,6 +93,13 @@ $defs: required: - pins +required: + - compatible + - reg + - reg-names + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml index a9167dac9ab5..240e6d45cc95 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml @@ -32,16 +32,6 @@ properties: - const: core - const: audio - gpio-controller: true - - "#gpio-cells": - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - patternProperties: "-state$": oneOf: @@ -57,7 +47,8 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: /schemas/pinctrl/pincfg-node.yaml + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -79,48 +70,16 @@ $defs: Specify the alternative function to be configured for the specified pins. - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - slew-rate: - enum: [0, 1, 2, 3] - default: 0 - description: | - 0: No adjustments - 1: Higher Slew rate (faster edges) - 2: Lower Slew rate (slower edges) - 3: Reserved (No adjustments) - - bias-bus-hold: true - bias-pull-down: true - bias-pull-up: true - bias-disable: true - input-enable: true - output-high: true - output-low: true - - required: - - pins - - function - - additionalProperties: false - allOf: - - $ref: pinctrl.yaml# + - $ref: qcom,lpass-lpi-common.yaml# required: - compatible - reg - clocks - clock-names - - gpio-controller - - "#gpio-cells" - - gpio-ranges -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml index 4bd6d7977d3e..ed344deaf8b9 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml @@ -25,19 +25,7 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true gpio-reserved-ranges: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg - -additionalProperties: false patternProperties: "-state$": @@ -108,6 +96,12 @@ $defs: required: - pins +required: + - compatible + - reg + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml index 508e0633b253..a00cb43df144 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml @@ -34,10 +34,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - gpio-reserved-ranges: minItems: 1 maxItems: 57 @@ -45,10 +41,6 @@ properties: gpio-line-names: maxItems: 114 - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - patternProperties: "-state$": oneOf: @@ -130,7 +122,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml index 84a15f77e710..b56e717aa28e 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml @@ -25,23 +25,10 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true gpio-reserved-ranges: minItems: 1 maxItems: 75 - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg - -additionalProperties: false - patternProperties: "-state$": oneOf: @@ -98,6 +85,12 @@ $defs: required: - pins +required: + - compatible + - reg + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml index d301881ddfa8..dfe5616b9b85 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml @@ -26,10 +26,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - gpio-reserved-ranges: minItems: 1 maxItems: 75 @@ -37,10 +33,6 @@ properties: gpio-line-names: maxItems: 150 - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - patternProperties: "-state$": oneOf: @@ -110,7 +102,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml index 67af99dd8f14..edbcff92bbf9 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml @@ -23,12 +23,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - gpio-reserved-ranges: maxItems: 1 @@ -102,7 +96,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml index 27319782d94b..a31b638c456d 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml @@ -22,12 +22,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - gpio-reserved-ranges: maxItems: 1 @@ -122,7 +116,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml index 7cb96aa75b08..cb1d978d02c9 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml @@ -22,10 +22,8 @@ properties: reg: maxItems: 1 - interrupts: true - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true + interrupts: + maxItems: 1 gpio-reserved-ranges: minItems: 1 @@ -34,10 +32,6 @@ properties: gpio-line-names: maxItems: 133 - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - patternProperties: "-state$": oneOf: @@ -100,7 +94,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml new file mode 100644 index 000000000000..bb08ca5a1509 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml @@ -0,0 +1,151 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm4450-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SM4450 TLMM block + +maintainers: + - Tengfei Fan <quic_tengfan@quicinc.com> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM4450 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sm4450-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 68 + + gpio-line-names: + maxItems: 136 + + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm4450-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm4450-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm4450-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-5])$" + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2, + atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02, + atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng, + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, + dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c, + jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, + mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, + mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0, + mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk, + phase_flag0, phase_flag1, phase_flag10, phase_flag11, + phase_flag12, phase_flag13, phase_flag14, phase_flag15, + phase_flag16, phase_flag17, phase_flag18, phase_flag19, + phase_flag2, phase_flag20, phase_flag21, phase_flag22, + phase_flag23, phase_flag24, phase_flag25, phase_flag26, + phase_flag27, phase_flag28, phase_flag29, phase_flag3, + phase_flag30, phase_flag31, phase_flag4, phase_flag5, + phase_flag6, phase_flag7, phase_flag8, phase_flag9, + pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2, + prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1, + qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, + qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, + qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable, + qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request, + qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, + qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5, + qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3, + qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0, + tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1, + tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, + uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data, + uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1, + vsense_trigger ] + + required: + - pins + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f100000 { + compatible = "qcom,sm4450-tlmm"; + reg = <0x0f100000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 137>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-state { + rx-pins { + pins = "gpio23"; + function = "qup1_se2"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio22"; + function = "qup1_se2"; + bias-disable; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml index abac3311fc55..f4cf2ce86fcd 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml @@ -31,16 +31,6 @@ properties: items: - const: audio - gpio-controller: true - - "#gpio-cells": - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - patternProperties: "-state$": oneOf: @@ -56,7 +46,8 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: /schemas/pinctrl/pincfg-node.yaml + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -75,48 +66,17 @@ $defs: Specify the alternative function to be configured for the specified pins. - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - slew-rate: - enum: [0, 1, 2, 3] - default: 0 - description: | - 0: No adjustments - 1: Higher Slew rate (faster edges) - 2: Lower Slew rate (slower edges) - 3: Reserved (No adjustments) - - bias-bus-hold: true - bias-pull-down: true - bias-pull-up: true - bias-disable: true - input-enable: true - output-high: true - output-low: true - - required: - - pins - - function - - additionalProperties: false allOf: - - $ref: pinctrl.yaml# + - $ref: qcom,lpass-lpi-common.yaml# required: - compatible - reg - clocks - clock-names - - gpio-controller - - "#gpio-cells" - - gpio-ranges -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml index 871df54f69a2..7f36f9b93333 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml @@ -29,13 +29,7 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true gpio-reserved-ranges: true - wakeup-parent: true patternProperties: "-state$": @@ -97,7 +91,7 @@ required: - reg - reg-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml index 8d77707b02b9..ddeaeaa9a450 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml @@ -30,20 +30,7 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true gpio-reserved-ranges: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg - - reg-names - -additionalProperties: false patternProperties: "-state$": @@ -105,6 +92,13 @@ $defs: required: - pins +required: + - compatible + - reg + - reg-names + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml index 27af379cf791..a4771f87d936 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml @@ -26,10 +26,6 @@ properties: minItems: 9 maxItems: 9 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - gpio-reserved-ranges: minItems: 1 maxItems: 78 @@ -37,16 +33,6 @@ properties: gpio-line-names: maxItems: 156 - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg - -additionalProperties: false - patternProperties: "-state$": oneOf: @@ -112,6 +98,12 @@ $defs: required: - pins +required: + - compatible + - reg + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml index 6e02ba24825f..047f82863f9b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml @@ -25,19 +25,7 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true gpio-reserved-ranges: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg - -additionalProperties: false patternProperties: "-state$": @@ -113,6 +101,12 @@ $defs: required: - pins +required: + - compatible + - reg + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml index ede0f3acad9c..7f23f939ad32 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml @@ -32,13 +32,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 60 @@ -111,7 +104,7 @@ required: - reg - reg-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml index c6439626464e..bdb7ed4be026 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml @@ -30,13 +30,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 88 @@ -113,7 +106,7 @@ required: - reg - reg-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml index 4b4be7efc150..750c996c10a7 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml @@ -30,16 +30,6 @@ properties: - const: core - const: audio - gpio-controller: true - - "#gpio-cells": - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - patternProperties: "-state$": oneOf: @@ -55,7 +45,8 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: /schemas/pinctrl/pincfg-node.yaml + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -78,48 +69,16 @@ $defs: Specify the alternative function to be configured for the specified pins. - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - slew-rate: - enum: [0, 1, 2, 3] - default: 0 - description: | - 0: No adjustments - 1: Higher Slew rate (faster edges) - 2: Lower Slew rate (slower edges) - 3: Reserved (No adjustments) - - bias-pull-down: true - bias-pull-up: true - bias-bus-hold: true - bias-disable: true - input-enable: true - output-high: true - output-low: true - - required: - - pins - - function - - additionalProperties: false - allOf: - - $ref: pinctrl.yaml# + - $ref: qcom,lpass-lpi-common.yaml# required: - compatible - reg - clocks - clock-names - - gpio-controller - - "#gpio-cells" - - gpio-ranges -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml index 021c54708524..b5d04347c064 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml @@ -28,13 +28,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - gpio-reserved-ranges: minItems: 1 maxItems: 90 @@ -106,7 +99,7 @@ required: - reg - reg-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml index 2e65ae08dd21..9d782f910b31 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml @@ -33,16 +33,6 @@ properties: - const: core - const: audio - gpio-controller: true - - "#gpio-cells": - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - patternProperties: "-state$": oneOf: @@ -58,7 +48,8 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: /schemas/pinctrl/pincfg-node.yaml + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -81,48 +72,16 @@ $defs: Specify the alternative function to be configured for the specified pins. - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - slew-rate: - enum: [0, 1, 2, 3] - default: 0 - description: | - 0: No adjustments - 1: Higher Slew rate (faster edges) - 2: Lower Slew rate (slower edges) - 3: Reserved (No adjustments) - - bias-bus-hold: true - bias-pull-down: true - bias-pull-up: true - bias-disable: true - input-enable: true - output-high: true - output-low: true - - required: - - pins - - function - - additionalProperties: false - allOf: - - $ref: pinctrl.yaml# + - $ref: qcom,lpass-lpi-common.yaml# required: - compatible - reg - clocks - clock-names - - gpio-controller - - "#gpio-cells" - - gpio-ranges -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml index 6e8f41ff0a76..ec5e09611d81 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml @@ -25,10 +25,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - gpio-reserved-ranges: minItems: 1 maxItems: 102 @@ -36,16 +32,6 @@ properties: gpio-line-names: maxItems: 203 - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg - -additionalProperties: false - patternProperties: "-state$": oneOf: @@ -108,6 +94,12 @@ $defs: required: - pins +required: + - compatible + - reg + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml index 1eefa9aa6a86..e7565592da86 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml @@ -32,16 +32,6 @@ properties: - const: core - const: audio - gpio-controller: true - - "#gpio-cells": - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - patternProperties: "-state$": oneOf: @@ -57,7 +47,8 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: /schemas/pinctrl/pincfg-node.yaml + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -81,48 +72,16 @@ $defs: Specify the alternative function to be configured for the specified pins. - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - slew-rate: - enum: [0, 1, 2, 3] - default: 0 - description: | - 0: No adjustments - 1: Higher Slew rate (faster edges) - 2: Lower Slew rate (slower edges) - 3: Reserved (No adjustments) - - bias-bus-hold: true - bias-pull-down: true - bias-pull-up: true - bias-disable: true - input-enable: true - output-high: true - output-low: true - - required: - - pins - - function - - additionalProperties: false - allOf: - - $ref: pinctrl.yaml# + - $ref: qcom,lpass-lpi-common.yaml# required: - compatible - reg - clocks - clock-names - - gpio-controller - - "#gpio-cells" - - gpio-ranges -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml index 5163fe3f5365..16fd2c5e2339 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml @@ -25,10 +25,6 @@ properties: interrupts: maxItems: 1 - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true - gpio-reserved-ranges: minItems: 1 maxItems: 105 @@ -36,16 +32,6 @@ properties: gpio-line-names: maxItems: 210 - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg - -additionalProperties: false - patternProperties: "-state$": oneOf: @@ -107,6 +93,12 @@ $defs: required: - pins +required: + - compatible + - reg + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml index ef9743246849..bf4a72facae1 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml @@ -16,7 +16,11 @@ description: properties: compatible: - const: qcom,sm8550-lpass-lpi-pinctrl + oneOf: + - const: qcom,sm8550-lpass-lpi-pinctrl + - items: + - const: qcom,x1e80100-lpass-lpi-pinctrl + - const: qcom,sm8550-lpass-lpi-pinctrl reg: items: @@ -33,16 +37,6 @@ properties: - const: core - const: audio - gpio-controller: true - - "#gpio-cells": - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - patternProperties: "-state$": oneOf: @@ -58,7 +52,8 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: /schemas/pinctrl/pincfg-node.yaml + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -81,48 +76,16 @@ $defs: Specify the alternative function to be configured for the specified pins. - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - slew-rate: - enum: [0, 1, 2, 3] - default: 0 - description: | - 0: No adjustments - 1: Higher Slew rate (faster edges) - 2: Lower Slew rate (slower edges) - 3: Reserved (No adjustments) - - bias-bus-hold: true - bias-pull-down: true - bias-pull-up: true - bias-disable: true - input-enable: true - output-high: true - output-low: true - - required: - - pins - - function - - additionalProperties: false - allOf: - - $ref: pinctrl.yaml# + - $ref: qcom,lpass-lpi-common.yaml# required: - compatible - reg - clocks - clock-names - - gpio-controller - - "#gpio-cells" - - gpio-ranges -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml index f789c7753a92..c2ae79df424f 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml @@ -22,10 +22,8 @@ properties: reg: maxItems: 1 - interrupts: true - interrupt-controller: true - "#interrupt-cells": true - gpio-controller: true + interrupts: + maxItems: 1 gpio-reserved-ranges: minItems: 1 @@ -34,10 +32,6 @@ properties: gpio-line-names: maxItems: 210 - "#gpio-cells": true - gpio-ranges: true - wakeup-parent: true - patternProperties: "-state$": oneOf: @@ -117,7 +111,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml new file mode 100644 index 000000000000..db7214362301 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8650 SoC LPASS LPI TLMM + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM8650 SoC. + +properties: + compatible: + const: qcom,sm8650-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + + clocks: + items: + - description: LPASS Core voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: core + - const: audio + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8650-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8650-lpass-state" + additionalProperties: false + +$defs: + qcom-sm8650-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-9]|2[0-2])$" + + function: + enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk, + dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b, + ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk, + i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk, + i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk, + i2s4_data, i2s4_ws, qca_swr_clk, qca_swr_data, slimbus_clk, + slimbus_data, swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data, + wsa_swr_clk, wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ] + description: + Specify the alternative function to be configured for the specified + pins. + +allOf: + - $ref: qcom,lpass-lpi-common.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> + + lpass_tlmm: pinctrl@6e80000 { + compatible = "qcom,sm8650-lpass-lpi-pinctrl"; + reg = <0x06e80000 0x20000>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + tx-swr-sleep-clk-state { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + bias-pull-down; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-tlmm.yaml new file mode 100644 index 000000000000..c0a06abf851d --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-tlmm.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8650-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SM8650 TLMM block + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM8650 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sm8650-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 105 + + gpio-line-names: + maxItems: 210 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8650-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8650-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm8650-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$" + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ gpio, aoss_cti, atest_char, atest_usb, audio_ext_mclk0, + audio_ext_mclk1, audio_ref_clk, cam_aon_mclk2, cam_aon_mclk4, + cam_mclk, cci_async_in, cci_i2c_scl, cci_i2c_sda, cci_timer, + cmu_rng, coex_uart1_rx, coex_uart1_tx, coex_uart2_rx, + coex_uart2_tx, cri_trng, dbg_out_clk, ddr_bist_complete, + ddr_bist_fail, ddr_bist_start, ddr_bist_stop, ddr_pxi0, + ddr_pxi1, ddr_pxi2, ddr_pxi3, do_not, dp_hot, gcc_gp1, + gcc_gp2, gcc_gp3, gnss_adc0, gnss_adc1, i2chub0_se0, + i2chub0_se1, i2chub0_se2, i2chub0_se3, i2chub0_se4, + i2chub0_se5, i2chub0_se6, i2chub0_se7, i2chub0_se8, + i2chub0_se9, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws, + i2s1_data0, i2s1_data1, i2s1_sck, i2s1_ws, ibi_i3c, + jitter_bist, mdp_vsync, mdp_vsync0_out, mdp_vsync1_out, + mdp_vsync2_out, mdp_vsync3_out, mdp_vsync_e, nav_gpio0, + nav_gpio1, nav_gpio2, nav_gpio3, pcie0_clk_req_n, + pcie1_clk_req_n, phase_flag, pll_bist_sync, pll_clk_aux, + prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, + qdss_gpio, qlink_big_enable, qlink_big_request, + qlink_little_enable, qlink_little_request, qlink_wmss, + qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qup1_se0, + qup1_se1, qup1_se2, qup1_se3, qup1_se4, qup1_se5, qup1_se6, + qup1_se7, qup2_se0, qup2_se1, qup2_se2, qup2_se3, qup2_se4, + qup2_se5, qup2_se6, qup2_se7, sd_write_protect, sdc40, sdc41, + sdc42, sdc43, sdc4_clk, sdc4_cmd, tb_trig_sdc2, tb_trig_sdc4, + tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout, + tgu_ch3_trigout, tmess_prng0, tmess_prng1, tmess_prng2, + tmess_prng3, tsense_pwm1, tsense_pwm2, tsense_pwm3, uim0_clk, + uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data, + uim1_present, uim1_reset, usb1_hs, usb_phy, vfr_0, vfr_1, + vsense_trigger_mirnat ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8650-tlmm"; + reg = <0x0f100000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 211>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-state { + rx-pins { + pins = "gpio60"; + function = "qup1_se7"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio61"; + function = "qup1_se7"; + bias-disable; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,x1e80100-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,x1e80100-tlmm.yaml new file mode 100644 index 000000000000..a1333e0743a9 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,x1e80100-tlmm.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. X1E80100 TLMM block + +maintainers: + - Rajendra Nayak <quic_rjendra@quicinc.com> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm X1E80100 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,x1e80100-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 119 + + gpio-line-names: + maxItems: 238 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-x1e80100-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-x1e80100-tlmm-state" + additionalProperties: false + +$defs: + qcom-x1e80100-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-2][0-9]|23[0-7])$" + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ aon_cci, aoss_cti, atest_char, atest_char0, + atest_char1, atest_char2, atest_char3, atest_usb, + audio_ext, audio_ref, cam_aon, cam_mclk, cci_async, + cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, + cci_timer4, cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, + cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, + ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5, ddr_pxi6, ddr_pxi7, + edp0_hot, edp0_lcd, edp1_hot, edp1_lcd, eusb0_ac, eusb1_ac, + eusb2_ac, eusb3_ac, eusb5_ac, eusb6_ac, gcc_gp1, gcc_gp2, + gcc_gp3, gpio, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws, i2s1_data0, + i2s1_data1, i2s1_sck, i2s1_ws, ibi_i3c, jitter_bist, mdp_vsync0, + mdp_vsync1, mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, + mdp_vsync6, mdp_vsync7, mdp_vsync8, pcie3_clk, pcie4_clk, + pcie5_clk, pcie6a_clk, pcie6b_clk, phase_flag, pll_bist, pll_clk, + prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, + qdss_gpio, qspi00, qspi01, qspi02, qspi03, qspi0_clk, qspi0_cs0, + qspi0_cs1, qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, + qup0_se5, qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3, + qup1_se4, qup1_se5, qup1_se6, qup1_se7, qup2_se0, qup2_se1, qup2_se2, + qup2_se3, qup2_se4, qup2_se5, qup2_se6, qup2_se7, sd_write, sdc4_clk, + sdc4_cmd, sdc4_data0, sdc4_data1, sdc4_data2, sdc4_data3, sys_throttle, + tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5, + tgu_ch6, tgu_ch7, tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3, + tsense_pwm1, tsense_pwm2, sense_pwm3, tsense_pwm4, usb0_dp, usb0_phy, + usb0_sbrx, usb0_sbtx, usb1_dp, usb1_phy, usb1_sbrx, usb1_sbtx, + usb2_dp, usb2_phy, usb2_sbrx, usb2_sbtx, vsense_trigger ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f100000 { + compatible = "qcom,x1e80100-tlmm"; + reg = <0x0f100000 0xf00000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 239>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-state { + rx-pins { + pins = "gpio26"; + function = "qup2_se7"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio27"; + function = "qup2_se7"; + bias-disable; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml index 8271e7b2c162..8b8e4e1a000f 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml @@ -20,7 +20,7 @@ description: properties: compatible: - const: "renesas,r7s9210-pinctrl" # RZ/A2M + const: renesas,r7s9210-pinctrl # RZ/A2M reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index b5ca40d0e251..d476de82e5c3 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -185,17 +185,17 @@ examples: sd1_mux { pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */ <RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */ - power-source = <3300>; + power-source = <3300>; }; sd1_data { pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; - power-source = <3300>; + power-source = <3300>; }; sd1_ctrl { pins = "SD1_CLK", "SD1_CMD"; - power-source = <3300>; + power-source = <3300>; }; }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml index 1de91a51234d..4dfb49b0e07f 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml @@ -28,15 +28,27 @@ description: | properties: compatible: - enum: - - samsung,s3c2410-wakeup-eint - - samsung,s3c2412-wakeup-eint - - samsung,s3c64xx-wakeup-eint - - samsung,s5pv210-wakeup-eint - - samsung,exynos4210-wakeup-eint - - samsung,exynos7-wakeup-eint - - samsung,exynos850-wakeup-eint - - samsung,exynosautov9-wakeup-eint + oneOf: + - enum: + - samsung,s3c2410-wakeup-eint + - samsung,s3c2412-wakeup-eint + - samsung,s3c64xx-wakeup-eint + - samsung,s5pv210-wakeup-eint + - samsung,exynos4210-wakeup-eint + - samsung,exynos7-wakeup-eint + - samsung,exynosautov920-wakeup-eint + - items: + - enum: + - samsung,exynos5433-wakeup-eint + - samsung,exynos7885-wakeup-eint + - samsung,exynos850-wakeup-eint + - const: samsung,exynos7-wakeup-eint + - items: + - enum: + - google,gs101-wakeup-eint + - samsung,exynosautov9-wakeup-eint + - const: samsung,exynos850-wakeup-eint + - const: samsung,exynos7-wakeup-eint interrupts: description: @@ -79,11 +91,14 @@ allOf: - if: properties: compatible: - contains: - enum: - - samsung,s5pv210-wakeup-eint - - samsung,exynos4210-wakeup-eint - - samsung,exynos7-wakeup-eint + # Match without "contains", to skip newer variants which are still + # compatible with samsung,exynos7-wakeup-eint + enum: + - samsung,s5pv210-wakeup-eint + - samsung,exynos4210-wakeup-eint + - samsung,exynos5433-wakeup-eint + - samsung,exynos7-wakeup-eint + - samsung,exynos7885-wakeup-eint then: properties: interrupts: @@ -98,7 +113,7 @@ allOf: contains: enum: - samsung,exynos850-wakeup-eint - - samsung,exynosautov9-wakeup-eint + - samsung,exynosautov920-wakeup-eint then: properties: interrupts: false diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml index 26614621774a..118549c25976 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml @@ -35,6 +35,7 @@ properties: compatible: enum: + - google,gs101-pinctrl - samsung,s3c2412-pinctrl - samsung,s3c2416-pinctrl - samsung,s3c2440-pinctrl @@ -53,6 +54,7 @@ properties: - samsung,exynos7885-pinctrl - samsung,exynos850-pinctrl - samsung,exynosautov9-pinctrl + - samsung,exynosautov920-pinctrl - tesla,fsd-pinctrl interrupts: @@ -313,7 +315,8 @@ examples: pinctrl-0 = <&initial_alive>; wakeup-interrupt-controller { - compatible = "samsung,exynos7-wakeup-eint"; + compatible = "samsung,exynos5433-wakeup-eint", + "samsung,exynos7-wakeup-eint"; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml index b85f9e36ce4b..d2676f92ef5b 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml @@ -39,7 +39,7 @@ properties: phandle to the SLCR. patternProperties: - '^(.*-)?(default|gpio)$': + '^(.*-)?(default|gpio-grp)$': type: object patternProperties: '^mux': diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml index 01b6f2b57843..f13d315b5d5e 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml @@ -31,7 +31,7 @@ properties: const: xlnx,zynqmp-pinctrl patternProperties: - '^(.*-)?(default|gpio)$': + '^(.*-)?(default|gpio-grp)$': type: object patternProperties: '^mux': diff --git a/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml b/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml index 407b7cfec783..7a0f1a400868 100644 --- a/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml +++ b/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml @@ -20,6 +20,7 @@ properties: compatible: items: - enum: + - fsl,imx8dl-scu-pd - fsl,imx8qm-scu-pd - fsl,imx8qxp-scu-pd - const: fsl,scu-pd diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml index 14a262bcbf7c..627f8a6078c2 100644 --- a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml +++ b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml @@ -28,17 +28,15 @@ properties: items: - const: reboot-mode -patternProperties: - "^mode-.+": - $ref: /schemas/types.yaml#/definitions/uint32 - description: Vendor-specific mode value written to the mode register +allOf: + - $ref: reboot-mode.yaml# required: - compatible - nvmem-cells - nvmem-cell-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml index 5e460128b0d1..fc8105a7b9b2 100644 --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml @@ -111,21 +111,24 @@ examples: #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/spmi/spmi.h> - spmi_bus: spmi@c440000 { + + spmi@c440000 { reg = <0x0c440000 0x1100>; #address-cells = <2>; #size-cells = <0>; - pmk8350: pmic@0 { + + pmic@0 { reg = <0x0 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; - pmk8350_pon: pon_hlos@1300 { - reg = <0x1300>; + + pon@800 { compatible = "qcom,pm8998-pon"; + reg = <0x800>; pwrkey { compatible = "qcom,pm8941-pwrkey"; - interrupts = < 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH >; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; bias-pull-up; linux,code = <KEY_POWER>; diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml index 9b1ffceefe3d..b6acff199cde 100644 --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml @@ -29,12 +29,10 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: Offset in the register map for the mode register (in bytes) -patternProperties: - "^mode-.+": - $ref: /schemas/types.yaml#/definitions/uint32 - description: Vendor-specific mode value written to the mode register +allOf: + - $ref: reboot-mode.yaml# -additionalProperties: false +unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml index 45792e216981..799831636194 100644 --- a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml +++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml @@ -57,7 +57,7 @@ examples: firmware { zynqmp-firmware { - zynqmp-power { + power-management { compatible = "xlnx,zynqmp-power"; interrupts = <0 35 4>; }; @@ -70,7 +70,7 @@ examples: firmware { zynqmp-firmware { - zynqmp-power { + power-management { compatible = "xlnx,zynqmp-power"; interrupt-parent = <&gic>; interrupts = <0 35 4>; diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.yaml b/Documentation/devicetree/bindings/power/supply/bq24190.yaml index d3ebc9de8c0b..131b7e57d22f 100644 --- a/Documentation/devicetree/bindings/power/supply/bq24190.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq24190.yaml @@ -20,6 +20,7 @@ properties: - ti,bq24192 - ti,bq24192i - ti,bq24196 + - ti,bq24296 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml index 07e38be39f1b..89f9603499b4 100644 --- a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml @@ -79,10 +79,10 @@ examples: interrupt-parent = <&gpio1>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - richtek,output-charge-current = <500000>; - richtek,end-of-charge-percentage = <10>; - richtek,battery-regulation-voltage = <4200000>; - richtek,boost-output-voltage = <5050000>; + richtek,output-charge-current = <500000>; + richtek,end-of-charge-percentage = <10>; + richtek,battery-regulation-voltage = <4200000>; + richtek,boost-output-voltage = <5050000>; richtek,min-input-voltage-regulation = <4500000>; richtek,avg-input-current-regulation = <500000>; diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt index 697333a56d5e..75bc20b95688 100644 --- a/Documentation/devicetree/bindings/power/wakeup-source.txt +++ b/Documentation/devicetree/bindings/power/wakeup-source.txt @@ -3,16 +3,20 @@ Specifying wakeup capability for devices Any device nodes ---------------- -Nodes that describe devices which has wakeup capability must contain an +Nodes that describe devices which have wakeup capability may contain a "wakeup-source" boolean property. -Also, if device is marked as a wakeup source, then all the primary -interrupt(s) can be used as wakeup interrupt(s). +If the device is marked as a wakeup-source, interrupt wake capability depends +on the device specific "interrupt-names" property. If no interrupts are labeled +as wake capable, then it is up to the device to determine which interrupts can +wake the system. -However if the devices have dedicated interrupt as the wakeup source -then they need to specify/identify the same using device specific -interrupt name. In such cases only that interrupt can be used as wakeup -interrupt. +However if a device has a dedicated interrupt as the wakeup source, then it +needs to specify/identify it using a device specific interrupt name. In such +cases only that interrupt can be used as a wakeup interrupt. + +While various legacy interrupt names exist, new devices should use "wakeup" as +the canonical interrupt name. List of legacy properties and respective binding document --------------------------------------------------------- diff --git a/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml index 153e146df7d4..afcdeed4e88a 100644 --- a/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml +++ b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml @@ -8,7 +8,6 @@ title: MediaTek DISP_PWM Controller maintainers: - Jitao Shi <jitao.shi@mediatek.com> - - Xinlei Lee <xinlei.lee@mediatek.com> allOf: - $ref: pwm.yaml# diff --git a/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt deleted file mode 100644 index 25ecfe14c698..000000000000 --- a/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt +++ /dev/null @@ -1,22 +0,0 @@ -* OMAP PWM for dual-mode timers - -Required properties: -- compatible: Shall contain "ti,omap-dmtimer-pwm". -- ti,timers: phandle to PWM capable OMAP timer. See timer/ti,timer-dm.yaml for info - about these timers. -- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of - the cells format. - -Optional properties: -- ti,prescaler: Should be a value between 0 and 7, see the timers datasheet -- ti,clock-source: Set dmtimer parent clock, values between 0 and 2: - - 0x00 - high-frequency system clock (timer_sys_ck) - - 0x01 - 32-kHz always-on clock (timer_32k_ck) - - 0x02 - external clock (timer_ext_ck, OMAP2 only) - -Example: - pwm9: dmtimer-pwm@9 { - compatible = "ti,omap-dmtimer-pwm"; - ti,timers = <&timer9>; - #pwm-cells = <3>; - }; diff --git a/Documentation/devicetree/bindings/pwm/ti,omap-dmtimer-pwm.yaml b/Documentation/devicetree/bindings/pwm/ti,omap-dmtimer-pwm.yaml new file mode 100644 index 000000000000..1e8e094aad74 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/ti,omap-dmtimer-pwm.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/ti,omap-dmtimer-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI dual mode timer PWM controller + +maintainers: + - Tony Lindgren <tony@atomide.com> + +description: + TI dual mode timer instances have an IO pin for PWM capability + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: ti,omap-dmtimer-pwm + + "#pwm-cells": + const: 3 + + ti,timers: + description: Timer instance phandle for the PWM + $ref: /schemas/types.yaml#/definitions/phandle + + ti,prescaler: + description: | + Legacy clock prescaler for timer. The timer counter is prescaled + with 2^n where n is the prescaler. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + deprecated: true + + ti,clock-source: + description: | + Legacy clock for timer, please use assigned-clocks instead. + 0x00 - high-frequency system clock (timer_sys_ck) + 0x01 - 32-kHz always-on clock (timer_32k_ck) + 0x02 - external clock (timer_ext_ck, OMAP2 only) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2 ] + deprecated: true + +required: + - compatible + - ti,timers + +unevaluatedProperties: false + +examples: + - | + pwm9: pwm { + compatible = "ti,omap-dmtimer-pwm"; + ti,timers = <&timer9>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml index 0221397eb51e..f825ee9efd81 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml @@ -62,8 +62,8 @@ examples: regulator-name = "buck1"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <2187500>; - regulator-min-microamp = <3800000>; - regulator-max-microamp = <6800000>; + regulator-min-microamp = <3800000>; + regulator-max-microamp = <6800000>; regulator-boot-on; }; diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml index 6de5b027f990..0d34af98403f 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml @@ -98,8 +98,8 @@ examples: regulator-name = "buck1"; regulator-min-microvolt = <400000>; regulator-max-microvolt = <3587500>; - regulator-min-microamp = <460000>; - regulator-max-microamp = <7600000>; + regulator-min-microamp = <460000>; + regulator-max-microamp = <7600000>; regulator-boot-on; mps,buck-ovp-disable; mps,buck-phase-delay = /bits/ 8 <2>; diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml index 30632efdad8b..df36e29d974c 100644 --- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml @@ -113,10 +113,10 @@ examples: }; imx7d-cm4 { - compatible = "fsl,imx7d-cm4"; - memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>; - syscon = <&src>; - clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>; + compatible = "fsl,imx7d-cm4"; + memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>; + syscon = <&src>; + clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>; }; - | diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml index f10f329677d8..c054b84fdcd5 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml @@ -18,7 +18,10 @@ properties: enum: - qcom,sc7180-adsp-pas - qcom,sc7180-mpss-pas + - qcom,sc7280-adsp-pas + - qcom,sc7280-cdsp-pas - qcom,sc7280-mpss-pas + - qcom,sc7280-wpss-pas reg: maxItems: 1 @@ -75,6 +78,7 @@ allOf: compatible: enum: - qcom,sc7180-adsp-pas + - qcom,sc7280-adsp-pas then: properties: power-domains: @@ -114,6 +118,23 @@ allOf: power-domains: items: - description: CX power domain + - description: MSS power domain + power-domain-names: + items: + - const: cx + - const: mss + + - if: + properties: + compatible: + enum: + - qcom,sc7280-cdsp-pas + - qcom,sc7280-wpss-pas + then: + properties: + power-domains: + items: + - description: CX power domain - description: MX power domain power-domain-names: items: diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index f392e367d673..9d8670c00e3b 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -32,6 +32,7 @@ properties: oneOf: - items: - enum: + - amd,mbv32 - andestech,ax45mp - canaan,k210 - sifive,bullet0 @@ -62,8 +63,8 @@ properties: mmu-type: description: - Identifies the MMU address translation mode used on this - hart. These values originate from the RISC-V Privileged + Identifies the largest MMU address translation mode supported by + this hart. These values originate from the RISC-V Privileged Specification document, available from https://riscv.org/specifications/ $ref: /schemas/types.yaml#/definitions/string @@ -79,6 +80,11 @@ properties: description: The blocksize in bytes for the Zicbom cache operations. + riscv,cbop-block-size: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The blocksize in bytes for the Zicbop cache operations. + riscv,cboz-block-size: $ref: /schemas/types.yaml#/definitions/uint32 description: diff --git a/Documentation/devicetree/bindings/riscv/extensions.yaml b/Documentation/devicetree/bindings/riscv/extensions.yaml index c91ab0e46648..63d81dc895e5 100644 --- a/Documentation/devicetree/bindings/riscv/extensions.yaml +++ b/Documentation/devicetree/bindings/riscv/extensions.yaml @@ -48,7 +48,7 @@ properties: insensitive, letters in the riscv,isa string must be all lowercase. $ref: /schemas/types.yaml#/definitions/string - pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$ + pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[0-9a-z])+)?(?:_[hsxz](?:[0-9a-z])+)*$ deprecated: true riscv,isa-base: @@ -171,6 +171,12 @@ properties: memory types as ratified in the 20191213 version of the privileged ISA specification. + - const: zacas + description: | + The Zacas extension for Atomic Compare-and-Swap (CAS) instructions + is supported as ratified at commit 5059e0ca641c ("update to + ratified") of the riscv-zacas. + - const: zba description: | The standard Zba bit-manipulation extension for address generation @@ -190,12 +196,111 @@ properties: multiplication as ratified at commit 6d33919 ("Merge pull request #158 from hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip. + - const: zbkb + description: + The standard Zbkb bitmanip instructions for cryptography as ratified + in version 1.0 of RISC-V Cryptography Extensions Volume I + specification. + + - const: zbkc + description: + The standard Zbkc carry-less multiply instructions as ratified + in version 1.0 of RISC-V Cryptography Extensions Volume I + specification. + + - const: zbkx + description: + The standard Zbkx crossbar permutation instructions as ratified + in version 1.0 of RISC-V Cryptography Extensions Volume I + specification. + - const: zbs description: | The standard Zbs bit-manipulation extension for single-bit instructions as ratified at commit 6d33919 ("Merge pull request #158 from hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip. + - const: zfa + description: + The standard Zfa extension for additional floating point + instructions, as ratified in commit 056b6ff ("Zfa is ratified") of + riscv-isa-manual. + + - const: zfh + description: + The standard Zfh extension for 16-bit half-precision binary + floating-point instructions, as ratified in commit 64074bc ("Update + version numbers for Zfh/Zfinx") of riscv-isa-manual. + + - const: zfhmin + description: + The standard Zfhmin extension which provides minimal support for + 16-bit half-precision binary floating-point instructions, as ratified + in commit 64074bc ("Update version numbers for Zfh/Zfinx") of + riscv-isa-manual. + + - const: zk + description: + The standard Zk Standard Scalar cryptography extension as ratified + in version 1.0 of RISC-V Cryptography Extensions Volume I + specification. + + - const: zkn + description: + The standard Zkn NIST algorithm suite extensions as ratified in + version 1.0 of RISC-V Cryptography Extensions Volume I + specification. + + - const: zknd + description: | + The standard Zknd for NIST suite: AES decryption instructions as + ratified in version 1.0 of RISC-V Cryptography Extensions Volume I + specification. + + - const: zkne + description: | + The standard Zkne for NIST suite: AES encryption instructions as + ratified in version 1.0 of RISC-V Cryptography Extensions Volume I + specification. + + - const: zknh + description: | + The standard Zknh for NIST suite: hash function instructions as + ratified in version 1.0 of RISC-V Cryptography Extensions Volume I + specification. + + - const: zkr + description: + The standard Zkr entropy source extension as ratified in version + 1.0 of RISC-V Cryptography Extensions Volume I specification. + This string being present means that the CSR associated to this + extension is accessible at the privilege level to which that + device-tree has been provided. + + - const: zks + description: + The standard Zks ShangMi algorithm suite extensions as ratified in + version 1.0 of RISC-V Cryptography Extensions Volume I + specification. + + - const: zksed + description: | + The standard Zksed for ShangMi suite: SM4 block cipher instructions + as ratified in version 1.0 of RISC-V Cryptography Extensions + Volume I specification. + + - const: zksh + description: | + The standard Zksh for ShangMi suite: SM3 hash function instructions + as ratified in version 1.0 of RISC-V Cryptography Extensions + Volume I specification. + + - const: zkt + description: + The standard Zkt for data independent execution latency as ratified + in version 1.0 of RISC-V Cryptography Extensions Volume I + specification. + - const: zicbom description: The standard Zicbom extension for base cache management operations as @@ -246,6 +351,12 @@ properties: The standard Zihintpause extension for pause hints, as ratified in commit d8ab5c7 ("Zihintpause is ratified") of the riscv-isa-manual. + - const: zihintntl + description: + The standard Zihintntl extension for non-temporal locality hints, as + ratified in commit 0dc91f5 ("Zihintntl is ratified") of the + riscv-isa-manual. + - const: zihpm description: The standard Zihpm extension for hardware performance counters, as @@ -258,5 +369,113 @@ properties: in commit 2e5236 ("Ztso is now ratified.") of the riscv-isa-manual. + - const: zvbb + description: + The standard Zvbb extension for vectored basic bit-manipulation + instructions, as ratified in commit 56ed795 ("Update + riscv-crypto-spec-vector.adoc") of riscv-crypto. + + - const: zvbc + description: + The standard Zvbc extension for vectored carryless multiplication + instructions, as ratified in commit 56ed795 ("Update + riscv-crypto-spec-vector.adoc") of riscv-crypto. + + - const: zvfh + description: + The standard Zvfh extension for vectored half-precision + floating-point instructions, as ratified in commit e2ccd05 + ("Remove draft warnings from Zvfh[min]") of riscv-v-spec. + + - const: zvfhmin + description: + The standard Zvfhmin extension for vectored minimal half-precision + floating-point instructions, as ratified in commit e2ccd05 + ("Remove draft warnings from Zvfh[min]") of riscv-v-spec. + + - const: zvkb + description: + The standard Zvkb extension for vector cryptography bit-manipulation + instructions, as ratified in commit 56ed795 ("Update + riscv-crypto-spec-vector.adoc") of riscv-crypto. + + - const: zvkg + description: + The standard Zvkg extension for vector GCM/GMAC instructions, as + ratified in commit 56ed795 ("Update riscv-crypto-spec-vector.adoc") + of riscv-crypto. + + - const: zvkn + description: + The standard Zvkn extension for NIST algorithm suite instructions, as + ratified in commit 56ed795 ("Update riscv-crypto-spec-vector.adoc") + of riscv-crypto. + + - const: zvknc + description: + The standard Zvknc extension for NIST algorithm suite with carryless + multiply instructions, as ratified in commit 56ed795 ("Update + riscv-crypto-spec-vector.adoc") of riscv-crypto. + + - const: zvkned + description: + The standard Zvkned extension for Vector AES block cipher + instructions, as ratified in commit 56ed795 ("Update + riscv-crypto-spec-vector.adoc") of riscv-crypto. + + - const: zvkng + description: + The standard Zvkng extension for NIST algorithm suite with GCM + instructions, as ratified in commit 56ed795 ("Update + riscv-crypto-spec-vector.adoc") of riscv-crypto. + + - const: zvknha + description: | + The standard Zvknha extension for NIST suite: vector SHA-2 secure, + hash (SHA-256 only) instructions, as ratified in commit + 56ed795 ("Update riscv-crypto-spec-vector.adoc") of riscv-crypto. + + - const: zvknhb + description: | + The standard Zvknhb extension for NIST suite: vector SHA-2 secure, + hash (SHA-256 and SHA-512) instructions, as ratified in commit + 56ed795 ("Update riscv-crypto-spec-vector.adoc") of riscv-crypto. + + - const: zvks + description: + The standard Zvks extension for ShangMi algorithm suite + instructions, as ratified in commit 56ed795 ("Update + riscv-crypto-spec-vector.adoc") of riscv-crypto. + + - const: zvksc + description: + The standard Zvksc extension for ShangMi algorithm suite with + carryless multiplication instructions, as ratified in commit 56ed795 + ("Update riscv-crypto-spec-vector.adoc") of riscv-crypto. + + - const: zvksed + description: | + The standard Zvksed extension for ShangMi suite: SM4 block cipher + instructions, as ratified in commit 56ed795 ("Update + riscv-crypto-spec-vector.adoc") of riscv-crypto. + + - const: zvksh + description: | + The standard Zvksh extension for ShangMi suite: SM3 secure hash + instructions, as ratified in commit 56ed795 ("Update + riscv-crypto-spec-vector.adoc") of riscv-crypto. + + - const: zvksg + description: + The standard Zvksg extension for ShangMi algorithm suite with GCM + instructions, as ratified in commit 56ed795 ("Update + riscv-crypto-spec-vector.adoc") of riscv-crypto. + + - const: zvkt + description: + The standard Zvkt extension for vector data-independent execution + latency, as ratified in commit 56ed795 ("Update + riscv-crypto-spec-vector.adoc") of riscv-crypto. + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/rtc/adi,max31335.yaml b/Documentation/devicetree/bindings/rtc/adi,max31335.yaml new file mode 100644 index 000000000000..0125cf6727cc --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/adi,max31335.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/adi,max31335.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX31335 RTC + +maintainers: + - Antoniu Miclaus <antoniu.miclaus@analog.com> + +description: + Analog Devices MAX31335 I2C RTC ±2ppm Automotive Real-Time Clock with + Integrated MEMS Resonator. + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + const: adi,max31335 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#clock-cells": + description: + RTC can be used as a clock source through its clock output pin. + const: 0 + + adi,tc-diode: + description: + Select the diode configuration for the trickle charger. + schottky - Schottky diode in series. + standard+schottky - standard diode + Schottky diode in series. + enum: [schottky, standard+schottky] + + trickle-resistor-ohms: + description: + Selected resistor for trickle charger. Should be specified if trickle + charger should be enabled. + enum: [3000, 6000, 11000] + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rtc@68 { + compatible = "adi,max31335"; + reg = <0x68>; + pinctrl-0 = <&rtc_nint_pins>; + interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>; + aux-voltage-chargeable = <1>; + trickle-resistor-ohms = <6000>; + adi,tc-diode = "schottky"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml b/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml index 1df7c45d95c1..b770149c5fd6 100644 --- a/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml +++ b/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml @@ -29,6 +29,8 @@ properties: trickle-diode-disable: true + wakeup-source: true + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/rtc/nuvoton,ma35d1-rtc.yaml b/Documentation/devicetree/bindings/rtc/nuvoton,ma35d1-rtc.yaml new file mode 100644 index 000000000000..5e4ade803eed --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/nuvoton,ma35d1-rtc.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/nuvoton,ma35d1-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton MA35D1 Real Time Clock + +maintainers: + - Min-Jen Chen <mjchen@nuvoton.com> + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + enum: + - nuvoton,ma35d1-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/nuvoton,ma35d1-clk.h> + rtc@40410000 { + compatible = "nuvoton,ma35d1-rtc"; + reg = <0x40410000 0x200>; + interrupts = <GIC_SPI 5 IRQ_TYPE_EDGE_RISING>; + clocks = <&clk RTC_GATE>; + }; + +... diff --git a/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml index b95a69cc9ae0..d274bb7a534b 100644 --- a/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml @@ -61,27 +61,27 @@ additionalProperties: false examples: - | + #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> - spmi_bus: spmi@c440000 { - reg = <0x0c440000 0x1100>; - #address-cells = <2>; - #size-cells = <0>; - pmicintc: pmic@0 { - reg = <0x0 SPMI_USID>; - compatible = "qcom,pm8921"; - interrupts = <104 8>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; + + spmi { + #address-cells = <2>; #size-cells = <0>; - pm8921_rtc: rtc@11d { - compatible = "qcom,pm8921-rtc"; - reg = <0x11d>; - interrupts = <0x27 0>; - nvmem-cells = <&rtc_offset>; - nvmem-cell-names = "offset"; + pmic@0 { + compatible = "qcom,pm8941", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + nvmem-cells = <&rtc_offset>; + nvmem-cell-names = "offset"; + }; }; - }; }; ... diff --git a/Documentation/devicetree/bindings/security/tpm/google,cr50.txt b/Documentation/devicetree/bindings/security/tpm/google,cr50.txt deleted file mode 100644 index cd69c2efdd37..000000000000 --- a/Documentation/devicetree/bindings/security/tpm/google,cr50.txt +++ /dev/null @@ -1,19 +0,0 @@ -* H1 Secure Microcontroller with Cr50 Firmware on SPI Bus. - -H1 Secure Microcontroller running Cr50 firmware provides several -functions, including TPM-like functionality. It communicates over -SPI using the FIFO protocol described in the PTP Spec, section 6. - -Required properties: -- compatible: Should be "google,cr50". -- spi-max-frequency: Maximum SPI frequency. - -Example: - -&spi0 { - tpm@0 { - compatible = "google,cr50"; - reg = <0>; - spi-max-frequency = <800000>; - }; -}; diff --git a/Documentation/devicetree/bindings/security/tpm/ibmvtpm.txt b/Documentation/devicetree/bindings/security/tpm/ibmvtpm.txt deleted file mode 100644 index d89f99971368..000000000000 --- a/Documentation/devicetree/bindings/security/tpm/ibmvtpm.txt +++ /dev/null @@ -1,41 +0,0 @@ -* Device Tree Bindings for IBM Virtual Trusted Platform Module(vtpm) - -Required properties: - -- compatible : property name that conveys the platform architecture - identifiers, as 'IBM,vtpm' -- device_type : specifies type of virtual device -- interrupts : property specifying the interrupt source number and - sense code associated with this virtual I/O Adapters -- ibm,my-drc-index : integer index for the connector between the device - and its parent - present only if Dynamic - Reconfiguration(DR) Connector is enabled -- ibm,#dma-address-cells: specifies the number of cells that are used to - encode the physical address field of dma-window - properties -- ibm,#dma-size-cells : specifies the number of cells that are used to - encode the size field of dma-window properties -- ibm,my-dma-window : specifies DMA window associated with this virtual - IOA -- ibm,loc-code : specifies the unique and persistent location code - associated with this virtual I/O Adapters -- linux,sml-base : 64-bit base address of the reserved memory allocated - for the firmware event log -- linux,sml-size : size of the memory allocated for the firmware event log - -Example (IBM Virtual Trusted Platform Module) ---------------------------------------------- - - vtpm@30000003 { - ibm,#dma-size-cells = <0x2>; - compatible = "IBM,vtpm"; - device_type = "IBM,vtpm"; - ibm,my-drc-index = <0x30000003>; - ibm,#dma-address-cells = <0x2>; - linux,sml-base = <0xc60e 0x0>; - interrupts = <0xa0003 0x0>; - ibm,my-dma-window = <0x10000003 0x0 0x0 0x0 0x10000000>; - ibm,loc-code = "U8286.41A.10082DV-V3-C3"; - reg = <0x30000003>; - linux,sml-size = <0xbce10200>; - }; diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt deleted file mode 100644 index 0dc121b6eace..000000000000 --- a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt +++ /dev/null @@ -1,34 +0,0 @@ -* STMicroelectronics SAS. ST33ZP24 TPM SoC - -Required properties: -- compatible: Should be "st,st33zp24-i2c". -- clock-frequency: I²C work frequency. -- reg: address on the bus - -Optional ST33ZP24 Properties: -- interrupts: GPIO interrupt to which the chip is connected -- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state. -If set, power must be present when the platform is going into sleep/hibernate mode. - -Optional SoC Specific Properties: -- pinctrl-names: Contains only one value - "default". -- pintctrl-0: Specifies the pin control groups used for this controller. - -Example (for ARM-based BeagleBoard xM with ST33ZP24 on I2C2): - -&i2c2 { - - - st33zp24: st33zp24@13 { - - compatible = "st,st33zp24-i2c"; - - reg = <0x13>; - clock-frequency = <400000>; - - interrupt-parent = <&gpio5>; - interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; - - lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>; - }; -}; diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt deleted file mode 100644 index 37198971f17b..000000000000 --- a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt +++ /dev/null @@ -1,32 +0,0 @@ -* STMicroelectronics SAS. ST33ZP24 TPM SoC - -Required properties: -- compatible: Should be "st,st33zp24-spi". -- spi-max-frequency: Maximum SPI frequency (<= 10000000). - -Optional ST33ZP24 Properties: -- interrupts: GPIO interrupt to which the chip is connected -- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state. -If set, power must be present when the platform is going into sleep/hibernate mode. - -Optional SoC Specific Properties: -- pinctrl-names: Contains only one value - "default". -- pintctrl-0: Specifies the pin control groups used for this controller. - -Example (for ARM-based BeagleBoard xM with ST33ZP24 on SPI4): - -&mcspi4 { - - - st33zp24@0 { - - compatible = "st,st33zp24-spi"; - - spi-max-frequency = <10000000>; - - interrupt-parent = <&gpio5>; - interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; - - lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>; - }; -}; diff --git a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt deleted file mode 100644 index a65d7b71e81a..000000000000 --- a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt +++ /dev/null @@ -1,26 +0,0 @@ -* Device Tree Bindings for I2C based Trusted Platform Module(TPM) - -Required properties: - -- compatible : 'manufacturer,model', eg. nuvoton,npct650 -- label : human readable string describing the device, eg. "tpm" -- linux,sml-base : 64-bit base address of the reserved memory allocated for - the firmware event log -- linux,sml-size : size of the memory allocated for the firmware event log - -Optional properties: - -- powered-while-suspended: present when the TPM is left powered on between - suspend and resume (makes the suspend/resume - callbacks do nothing). - -Example (for OpenPower Systems with Nuvoton TPM 2.0 on I2C) ----------------------------------------------------------- - -tpm@57 { - reg = <0x57>; - label = "tpm"; - compatible = "nuvoton,npct650", "nuvoton,npct601"; - linux,sml-base = <0x7f 0xfd450000>; - linux,sml-size = <0x10000>; -}; diff --git a/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt b/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt deleted file mode 100644 index 7c6304426da1..000000000000 --- a/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt +++ /dev/null @@ -1,25 +0,0 @@ -Trusted Computing Group MMIO Trusted Platform Module - -The TCG defines multi vendor standard for accessing a TPM chip, this -is the standard protocol defined to access the TPM via MMIO. Typically -this interface will be implemented over Intel's LPC bus. - -Refer to the 'TCG PC Client Specific TPM Interface Specification (TIS)' TCG -publication for the specification. - -Required properties: - -- compatible: should contain a string below for the chip, followed by - "tcg,tpm-tis-mmio". Valid chip strings are: - * "atmel,at97sc3204" -- reg: The location of the MMIO registers, should be at least 0x5000 bytes -- interrupts: An optional interrupt indicating command completion. - -Example: - - tpm_tis@90000 { - compatible = "atmel,at97sc3204", "tcg,tpm-tis-mmio"; - reg = <0x90000 0x5000>; - interrupt-parent = <&EIC0>; - interrupts = <1 2>; - }; diff --git a/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt b/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt deleted file mode 100644 index b800667da92b..000000000000 --- a/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt +++ /dev/null @@ -1,23 +0,0 @@ -Required properties: -- compatible: should be one of the following - "st,st33htpm-spi" - "infineon,slb9670" - "tcg,tpm_tis-spi" -- spi-max-frequency: Maximum SPI frequency (depends on TPMs). - -Optional SoC Specific Properties: -- pinctrl-names: Contains only one value - "default". -- pintctrl-0: Specifies the pin control groups used for this controller. - -Example (for ARM-based BeagleBoard xM with TPM_TIS on SPI4): - -&mcspi4 { - - - tpm_tis@0 { - - compatible = "tcg,tpm_tis-spi"; - - spi-max-frequency = <10000000>; - }; -}; diff --git a/Documentation/devicetree/bindings/serial/arm,dcc.yaml b/Documentation/devicetree/bindings/serial/arm,dcc.yaml new file mode 100644 index 000000000000..fd0589356617 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/arm,dcc.yaml @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/arm,dcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM DCC (Data communication channel) serial emulation + +maintainers: + - Michal Simek <michal.simek@amd.com> + +description: | + ARM DCC (Data communication channel) serial emulation interface available + via JTAG can be also used as one of serial line tightly coupled with every + ARM CPU available in the system. + +properties: + compatible: + const: arm,dcc + +required: + - compatible + +additionalProperties: false + +examples: + - | + serial { + compatible = "arm,dcc"; + }; diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml index 920539926d7e..7a105551fa6a 100644 --- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml @@ -13,7 +13,7 @@ description: | https://www.nxp.com/webapp/Download?colCode=S32V234RM. maintainers: - - Chester Lin <clin@suse.com> + - Chester Lin <chester62515@gmail.com> allOf: - $ref: serial.yaml# diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml index 83035553044a..9c6dc16f88a6 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml @@ -9,10 +9,6 @@ title: Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART) maintainers: - Fabio Estevam <festevam@gmail.com> -allOf: - - $ref: serial.yaml# - - $ref: rs485.yaml# - properties: compatible: oneOf: @@ -68,7 +64,11 @@ properties: - const: tx interrupts: - maxItems: 1 + items: + - description: UART RX Interrupt + - description: UART TX Interrupt + - description: UART RTS Interrupt + minItems: 1 wakeup-source: true @@ -110,6 +110,25 @@ required: - clock-names - interrupts +allOf: + - $ref: serial.yaml# + - $ref: rs485.yaml# + + - if: + properties: + compatible: + contains: + const: fsl,imx1-uart + then: + properties: + interrupts: + minItems: 3 + maxItems: 3 + else: + properties: + interrupts: + maxItems: 1 + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml index ee52bf8e8917..e0fa363ad7e2 100644 --- a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml +++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml @@ -48,9 +48,17 @@ properties: - const: tx - const: rx + interconnects: + maxItems: 1 + interrupts: maxItems: 1 + operating-points-v2: true + + power-domains: + maxItems: 1 + qcom,rx-crci: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -99,7 +107,9 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/interconnect/qcom,msm8996.h> #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> serial@f991e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; @@ -109,4 +119,7 @@ examples: clock-names = "core", "iface"; dmas = <&dma0 0>, <&dma0 1>; dma-names = "tx", "rx"; + power-domains = <&rpmpd MSM8996_VDDCX>; + operating-points-v2 = <&uart_opp_table>; + interconnects = <&pnoc MASTER_BLSP_1 &bimc SLAVE_EBI_CH0>; }; diff --git a/Documentation/devicetree/bindings/serial/renesas,sci.yaml b/Documentation/devicetree/bindings/serial/renesas,sci.yaml index 9f7305200c47..64d3db6e54e5 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,sci.yaml @@ -17,7 +17,7 @@ properties: oneOf: - items: - enum: - - renesas,r9a07g043-sci # RZ/G2UL + - renesas,r9a07g043-sci # RZ/G2UL and RZ/Five - renesas,r9a07g044-sci # RZ/G2{L,LC} - renesas,r9a07g054-sci # RZ/V2L - const: renesas,sci # generic SCI compatible UART diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml index 17c553123f96..1001d2a6ace8 100644 --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: serial.yaml# + - $ref: rs485.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.yaml b/Documentation/devicetree/bindings/serial/sprd-uart.yaml index 28ff77aa86c8..f4dbb6dc2b6e 100644 --- a/Documentation/devicetree/bindings/serial/sprd-uart.yaml +++ b/Documentation/devicetree/bindings/serial/sprd-uart.yaml @@ -20,6 +20,7 @@ properties: - sprd,sc9860-uart - sprd,sc9863a-uart - sprd,ums512-uart + - sprd,ums9620-uart - const: sprd,sc9836-uart - const: sprd,sc9836-uart diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml index f01c0dde0cf7..d28c102c0ce7 100644 --- a/Documentation/devicetree/bindings/sound/tas2562.yaml +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml @@ -18,7 +18,6 @@ description: | Specifications about the audio amplifier can be found at: https://www.ti.com/lit/gpn/tas2562 - https://www.ti.com/lit/gpn/tas2563 https://www.ti.com/lit/gpn/tas2564 https://www.ti.com/lit/gpn/tas2110 @@ -29,7 +28,6 @@ properties: compatible: enum: - ti,tas2562 - - ti,tas2563 - ti,tas2564 - ti,tas2110 diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml index a69e6c223308..976238689249 100644 --- a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml @@ -5,36 +5,46 @@ $id: http://devicetree.org/schemas/sound/ti,tas2781.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Texas Instruments TAS2781 SmartAMP +title: Texas Instruments TAS2563/TAS2781 SmartAMP maintainers: - Shenghao Ding <shenghao-ding@ti.com> -description: - The TAS2781 is a mono, digital input Class-D audio amplifier - optimized for efficiently driving high peak power into small - loudspeakers. An integrated on-chip DSP supports Texas Instruments - Smart Amp speaker protection algorithm. The integrated speaker - voltage and current sense provides for real time +description: | + The TAS2563/TAS2781 is a mono, digital input Class-D audio + amplifier optimized for efficiently driving high peak power into + small loudspeakers. An integrated on-chip DSP supports Texas + Instruments Smart Amp speaker protection algorithm. The + integrated speaker voltage and current sense provides for real time monitoring of loudspeaker behavior. -allOf: - - $ref: dai-common.yaml# + Specifications about the audio amplifier can be found at: + https://www.ti.com/lit/gpn/tas2563 + https://www.ti.com/lit/gpn/tas2781 properties: compatible: - enum: - - ti,tas2781 + description: | + ti,tas2563: 6.1-W Boosted Class-D Audio Amplifier With Integrated + DSP and IV Sense, 16/20/24/32bit stereo I2S or multichannel TDM. + + ti,tas2781: 24-V Class-D Amplifier with Real Time Integrated Speaker + Protection and Audio Processing, 16/20/24/32bit stereo I2S or + multichannel TDM. + oneOf: + - items: + - enum: + - ti,tas2563 + - const: ti,tas2781 + - enum: + - ti,tas2781 reg: description: - I2C address, in multiple tas2781s case, all the i2c address + I2C address, in multiple-AMP case, all the i2c address aggregate as one Audio Device to support multiple audio slots. maxItems: 8 minItems: 1 - items: - minimum: 0x38 - maximum: 0x3f reset-gpios: maxItems: 1 @@ -49,6 +59,44 @@ required: - compatible - reg +allOf: + - $ref: dai-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - ti,tas2563 + then: + properties: + reg: + description: + I2C address, in multiple-AMP case, all the i2c address + aggregate as one Audio Device to support multiple audio slots. + maxItems: 4 + minItems: 1 + items: + minimum: 0x4c + maximum: 0x4f + + - if: + properties: + compatible: + contains: + enum: + - ti,tas2781 + then: + properties: + reg: + description: + I2C address, in multiple-AMP case, all the i2c address + aggregate as one Audio Device to support multiple audio slots. + maxItems: 8 + minItems: 1 + items: + minimum: 0x38 + maximum: 0x3f + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml index 4b6c20fc8194..fced6f2d8ecb 100644 --- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml @@ -33,6 +33,7 @@ properties: - sifive,fu540-c000-clint # SiFive FU540 - starfive,jh7100-clint # StarFive JH7100 - starfive,jh7110-clint # StarFive JH7110 + - starfive,jh8100-clint # StarFive JH8100 - const: sifive,clint0 # SiFive CLINT v0 IP block - items: - enum: diff --git a/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml b/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml index fbd235650e52..2e92bcdeb423 100644 --- a/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml +++ b/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml @@ -17,7 +17,12 @@ properties: - const: thead,c900-aclint-mtimer reg: - maxItems: 1 + items: + - description: MTIMECMP Registers + + reg-names: + items: + - const: mtimecmp interrupts-extended: minItems: 1 @@ -28,6 +33,7 @@ additionalProperties: false required: - compatible - reg + - reg-names - interrupts-extended examples: @@ -39,5 +45,6 @@ examples: <&cpu3intc 7>, <&cpu4intc 7>; reg = <0xac000000 0x00010000>; + reg-names = "mtimecmp"; }; ... diff --git a/Documentation/devicetree/bindings/tpm/google,cr50.yaml b/Documentation/devicetree/bindings/tpm/google,cr50.yaml new file mode 100644 index 000000000000..9302e12e9fc7 --- /dev/null +++ b/Documentation/devicetree/bindings/tpm/google,cr50.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/tpm/google,cr50.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Google Security Chip H1 (running Cr50 firmware) + +maintainers: + - Andrey Pronin <apronin@chromium.org> + +description: | + Google has designed a family of security chips called "Titan". + One member is the H1 built into Chromebooks and running Cr50 firmware: + https://www.osfc.io/2018/talks/google-secure-microcontroller-and-ccd-closed-case-debugging/ + + The chip provides several functions, including TPM 2.0 like functionality. + It communicates over SPI or I²C using the FIFO protocol described in the + TCG PC Client Platform TPM Profile Specification for TPM 2.0 (PTP), sec 6: + https://trustedcomputinggroup.org/resource/pc-client-platform-tpm-profile-ptp-specification/ + +properties: + compatible: + const: google,cr50 + +allOf: + - $ref: tpm-common.yaml# + +anyOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - $ref: tcg,tpm-tis-i2c.yaml#/properties/reg + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + tpm@0 { + reg = <0>; + compatible = "google,cr50"; + spi-max-frequency = <800000>; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tpm@50 { + compatible = "google,cr50"; + reg = <0x50>; + interrupts-extended = <&pio 88 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&cr50_int>; + }; + }; diff --git a/Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml b/Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml new file mode 100644 index 000000000000..50a3fd31241c --- /dev/null +++ b/Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/tpm/ibm,vtpm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM Virtual Trusted Platform Module (vTPM) + +maintainers: + - Nayna Jain <nayna@linux.ibm.com> + +description: | + Virtual TPM is used on IBM POWER7+ and POWER8 systems running POWERVM. + It is supported through the adjunct partition with firmware release 740 + or higher. With vTPM support, each lpar is able to have its own vTPM + without the physical TPM hardware. The TPM functionality is provided by + communicating with the vTPM adjunct partition through Hypervisor calls + (Hcalls) and Command/Response Queue (CRQ) commands. + +properties: + compatible: + enum: + - IBM,vtpm + - IBM,vtpm20 + + device_type: + description: + type of virtual device + enum: + - IBM,vtpm + - IBM,vtpm20 + + reg: + maxItems: 1 + + 'ibm,#dma-address-cells': + description: + number of cells that are used to encode the physical address field of + dma-window properties + $ref: /schemas/types.yaml#/definitions/uint32-array + + 'ibm,#dma-size-cells': + description: + number of cells that are used to encode the size field of + dma-window properties + $ref: /schemas/types.yaml#/definitions/uint32-array + + ibm,my-dma-window: + description: + DMA window associated with this virtual I/O Adapter + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 5 + maxItems: 5 + + ibm,my-drc-index: + description: + integer index for the connector between the device and its parent; + present only if Dynamic Reconfiguration (DR) Connector is enabled + $ref: /schemas/types.yaml#/definitions/uint32 + + ibm,loc-code: + description: + unique and persistent location code associated with this virtual + I/O Adapter + $ref: /schemas/types.yaml#/definitions/string + +required: + - compatible + - device_type + - reg + - interrupts + - ibm,#dma-address-cells + - ibm,#dma-size-cells + - ibm,my-dma-window + - ibm,my-drc-index + - ibm,loc-code + - linux,sml-base + - linux,sml-size + +allOf: + - $ref: tpm-common.yaml# + +unevaluatedProperties: false + +examples: + - | + soc { + #address-cells = <1>; + #size-cells = <0>; + + tpm@30000003 { + compatible = "IBM,vtpm"; + device_type = "IBM,vtpm"; + reg = <0x30000003>; + interrupts = <0xa0003 0x0>; + ibm,#dma-address-cells = <0x2>; + ibm,#dma-size-cells = <0x2>; + ibm,my-dma-window = <0x10000003 0x0 0x0 0x0 0x10000000>; + ibm,my-drc-index = <0x30000003>; + ibm,loc-code = "U8286.41A.10082DV-V3-C3"; + linux,sml-base = <0xc60e 0x0>; + linux,sml-size = <0xbce10200>; + }; + }; diff --git a/Documentation/devicetree/bindings/tpm/microsoft,ftpm.yaml b/Documentation/devicetree/bindings/tpm/microsoft,ftpm.yaml new file mode 100644 index 000000000000..fdb81968f03d --- /dev/null +++ b/Documentation/devicetree/bindings/tpm/microsoft,ftpm.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/tpm/microsoft,ftpm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microsoft firmware-based Trusted Platform Module (fTPM) + +maintainers: + - Thirupathaiah Annapureddy <thiruan@microsoft.com> + - Sasha Levin <sashal@kernel.org> + +description: | + Commodity CPU architectures, such as ARM and Intel CPUs, have started to + offer trusted computing features in their CPUs aimed at displacing dedicated + trusted hardware. Unfortunately, these CPU architectures raise serious + challenges to building trusted systems because they omit providing secure + resources outside the CPU perimeter. + + Microsoft's firmware-based TPM 2.0 (fTPM) leverages ARM TrustZone to overcome + these challenges and provide software with security guarantees similar to + those of dedicated trusted hardware. + + https://www.microsoft.com/en-us/research/publication/ftpm-software-implementation-tpm-chip/ + https://github.com/Microsoft/ms-tpm-20-ref/tree/main/Samples/ARM32-FirmwareTPM + +properties: + compatible: + const: microsoft,ftpm + +required: + - compatible + - linux,sml-base + - linux,sml-size + +allOf: + - $ref: tpm-common.yaml# + +unevaluatedProperties: false + +examples: + - | + tpm { + compatible = "microsoft,ftpm"; + linux,sml-base = <0x0 0xc0000000>; + linux,sml-size = <0x10000>; + }; diff --git a/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-i2c.yaml b/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-i2c.yaml new file mode 100644 index 000000000000..3ab4434b7352 --- /dev/null +++ b/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-i2c.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/tpm/tcg,tpm-tis-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: I²C-attached Trusted Platform Module conforming to TCG TIS specification + +maintainers: + - Lukas Wunner <lukas@wunner.de> + +description: | + The Trusted Computing Group (TCG) has defined a multi-vendor standard + for accessing a TPM chip. It can be transported over various buses, + one of them being I²C. The standard is named: + TCG PC Client Specific TPM Interface Specification (TIS) + https://trustedcomputinggroup.org/resource/pc-client-work-group-pc-client-specific-tpm-interface-specification-tis/ + + The I²C interface was not originally part of the standard, but added + in 2017 with a separate document: + TCG PC Client Platform TPM Profile Specification for TPM 2.0 (PTP) + https://trustedcomputinggroup.org/resource/pc-client-platform-tpm-profile-ptp-specification/ + + Recent TPM 2.0 chips conform to this generic interface, others use a + vendor-specific I²C interface. + +properties: + compatible: + oneOf: + - description: Generic TPM 2.0 chips conforming to TCG PTP interface + items: + - enum: + - infineon,slb9673 + - nuvoton,npct75x + - const: tcg,tpm-tis-i2c + + - description: TPM 1.2 and 2.0 chips with vendor-specific I²C interface + items: + - enum: + - atmel,at97sc3204t # TPM 1.2 + - infineon,slb9635tt # TPM 1.2 (maximum 100 kHz) + - infineon,slb9645tt # TPM 1.2 (maximum 400 kHz) + - infineon,tpm_i2c_infineon # TPM 1.2 + - nuvoton,npct501 # TPM 1.2 + - nuvoton,npct601 # TPM 2.0 + - st,st33zp24-i2c # TPM 2.0 + - winbond,wpct301 # TPM 1.2 + + reg: + description: address of TPM on the I²C bus + +allOf: + - $ref: tpm-common.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tpm@57 { + label = "tpm"; + compatible = "nuvoton,npct601"; + reg = <0x57>; + linux,sml-base = <0x7f 0xfd450000>; + linux,sml-size = <0x10000>; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tpm@13 { + reg = <0x13>; + compatible = "st,st33zp24-i2c"; + interrupt-parent = <&gpio5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-mmio.yaml b/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-mmio.yaml new file mode 100644 index 000000000000..87bce0692129 --- /dev/null +++ b/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-mmio.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/tpm/tcg,tpm-tis-mmio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MMIO-accessed Trusted Platform Module conforming to TCG TIS specification + +maintainers: + - Lukas Wunner <lukas@wunner.de> + +description: | + The Trusted Computing Group (TCG) has defined a multi-vendor standard + for accessing a TPM chip. It can be transported over various buses, + one of them being LPC (via MMIO). The standard is named: + TCG PC Client Specific TPM Interface Specification (TIS) + https://trustedcomputinggroup.org/resource/pc-client-work-group-pc-client-specific-tpm-interface-specification-tis/ + +properties: + compatible: + items: + - enum: + - at97sc3201 + - atmel,at97sc3204 + - socionext,synquacer-tpm-mmio + - const: tcg,tpm-tis-mmio + + reg: + description: + location and length of the MMIO registers, length should be + at least 0x5000 bytes + +allOf: + - $ref: tpm-common.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + tpm@90000 { + compatible = "atmel,at97sc3204", "tcg,tpm-tis-mmio"; + reg = <0x90000 0x5000>; + interrupt-parent = <&EIC0>; + interrupts = <1 2>; + }; diff --git a/Documentation/devicetree/bindings/tpm/tcg,tpm_tis-spi.yaml b/Documentation/devicetree/bindings/tpm/tcg,tpm_tis-spi.yaml new file mode 100644 index 000000000000..c3413b47ac3d --- /dev/null +++ b/Documentation/devicetree/bindings/tpm/tcg,tpm_tis-spi.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/tpm/tcg,tpm_tis-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SPI-attached Trusted Platform Module conforming to TCG TIS specification + +maintainers: + - Lukas Wunner <lukas@wunner.de> + +description: | + The Trusted Computing Group (TCG) has defined a multi-vendor standard + for accessing a TPM chip. It can be transported over various buses, + one of them being SPI. The standard is named: + TCG PC Client Specific TPM Interface Specification (TIS) + https://trustedcomputinggroup.org/resource/pc-client-work-group-pc-client-specific-tpm-interface-specification-tis/ + +properties: + compatible: + items: + - enum: + - infineon,slb9670 + - st,st33htpm-spi + - st,st33zp24-spi + - const: tcg,tpm_tis-spi + +allOf: + - $ref: tpm-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + contains: + const: st,st33zp24-spi + then: + properties: + spi-max-frequency: + maximum: 10000000 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + tpm@0 { + reg = <0>; + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + spi-max-frequency = <10000000>; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + tpm@0 { + reg = <0>; + compatible = "st,st33zp24-spi", "tcg,tpm_tis-spi"; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/tpm/tpm-common.yaml b/Documentation/devicetree/bindings/tpm/tpm-common.yaml new file mode 100644 index 000000000000..90390624a8be --- /dev/null +++ b/Documentation/devicetree/bindings/tpm/tpm-common.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/tpm/tpm-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Trusted Platform Module common properties + +maintainers: + - Lukas Wunner <lukas@wunner.de> + +properties: + $nodename: + pattern: '^tpm(@[0-9a-f]+)?$' + + interrupts: + description: indicates command completion + maxItems: 1 + + label: + description: human readable string describing the device, e.g. "tpm" + + linux,sml-base: + description: + base address of reserved memory allocated for firmware event log + $ref: /schemas/types.yaml#/definitions/uint64 + + linux,sml-size: + description: + size of reserved memory allocated for firmware event log + $ref: /schemas/types.yaml#/definitions/uint32 + + memory-region: + description: reserved memory allocated for firmware event log + maxItems: 1 + + powered-while-suspended: + description: + present when the TPM is left powered on between suspend and resume + (makes the suspend/resume callbacks do nothing) + type: boolean + + resets: + description: Reset controller to reset the TPM + $ref: /schemas/types.yaml#/definitions/phandle + + reset-gpios: + description: Output GPIO pin to reset the TPM + maxItems: 1 + +# must always have both linux,sml-base and linux,sml-size +dependentRequired: + linux,sml-base: ['linux,sml-size'] + linux,sml-size: ['linux,sml-base'] + +# must only have either memory-region or linux,sml-base +# as well as either resets or reset-gpios +dependentSchemas: + memory-region: + properties: + linux,sml-base: false + linux,sml-base: + properties: + memory-region: false + resets: + properties: + reset-gpios: false + reset-gpios: + properties: + resets: false + +allOf: + - if: + properties: + compatible: + contains: + pattern: '^st,st33zp24' + then: + properties: + lpcpd-gpios: + description: + Output GPIO pin used for ST33ZP24 power management of D1/D2 state. + If set, power must be present when the platform is going into + sleep/hibernate mode. + maxItems: 1 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index a5fb2fa22026..79dcd92c4a43 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -49,8 +49,6 @@ properties: - ams,iaq-core # i2c serial eeprom (24cxx) - at,24c08 - # i2c trusted platform module (TPM) - - atmel,at97sc3204t # ATSHA204 - i2c h/w symmetric crypto module - atmel,atsha204 # ATSHA204A - i2c h/w symmetric crypto module @@ -151,12 +149,6 @@ properties: - infineon,ir38263 # Infineon IRPS5401 Voltage Regulator (PMIC) - infineon,irps5401 - # Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) - - infineon,slb9635tt - # Infineon SLB9645 I2C TPM (new protocol, max 400khz) - - infineon,slb9645tt - # Infineon SLB9673 I2C TPM 2.0 - - infineon,slb9673 # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor - infineon,tlv493d-a1b6 # Infineon Multi-phase Digital VR Controller xdpe11280 @@ -185,6 +177,8 @@ properties: - isil,isl29030 # Intersil ISL68137 Digital Output Configurable PWM Controller - isil,isl68137 + # Intersil ISL76682 Ambient Light Sensor + - isil,isl76682 # Linear Technology LTC2488 - lineartechnology,ltc2488 # 5 Bit Programmable, Pulse-Width Modulator @@ -307,10 +301,6 @@ properties: - national,lm85 # I2C ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator - national,lm92 - # i2c trusted platform module (TPM) - - nuvoton,npct501 - # i2c trusted platform module (TPM2) - - nuvoton,npct601 # Nuvoton Temperature Sensor - nuvoton,w83773g # OKI ML86V7667 video decoder @@ -355,8 +345,6 @@ properties: - silabs,si7020 # Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply - skyworks,sky81452 - # Socionext SynQuacer TPM MMIO module - - socionext,synquacer-tpm-mmio # SparkFun Qwiic Joystick (COM-15168) with i2c interface - sparkfun,qwiic-joystick # i2c serial eeprom (24cxx) @@ -411,8 +399,6 @@ properties: - winbond,w83793 # Vicor Corporation Digital Supervisor - vicor,pli1209bc - # i2c trusted platform module (TPM) - - winbond,wpct301 required: - compatible diff --git a/Documentation/devicetree/bindings/usb/generic-xhci.yaml b/Documentation/devicetree/bindings/usb/generic-xhci.yaml index 594ebb3ee432..6ceafa4af292 100644 --- a/Documentation/devicetree/bindings/usb/generic-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-xhci.yaml @@ -9,9 +9,6 @@ title: USB xHCI Controller maintainers: - Mathias Nyman <mathias.nyman@intel.com> -allOf: - - $ref: usb-xhci.yaml# - properties: compatible: oneOf: @@ -25,6 +22,11 @@ properties: - marvell,armada-380-xhci - marvell,armada-8k-xhci - const: generic-xhci + - description: Broadcom SoCs with power domains + items: + - enum: + - brcm,bcm2711-xhci + - const: brcm,xhci-brcm-v2 - description: Broadcom STB SoCs with xHCI enum: - brcm,xhci-brcm-v2 @@ -49,6 +51,9 @@ properties: - const: core - const: reg + power-domains: + maxItems: 1 + unevaluatedProperties: false required: @@ -56,6 +61,20 @@ required: - reg - interrupts +allOf: + - $ref: usb-xhci.yaml# + - if: + properties: + compatible: + contains: + const: brcm,bcm2711-xhci + then: + required: + - power-domains + else: + properties: + power-domains: false + examples: - | usb@f0931000 { diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml index ee08b9c3721f..37cf5249e526 100644 --- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml +++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml @@ -29,6 +29,11 @@ properties: description: the regulator that provides 3.3V core power to the hub. + peer-hub: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the peer hub on the controller. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml index e9644e333d78..924fd3d748a8 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml @@ -124,6 +124,17 @@ properties: defined in the xHCI spec on MTK's controller. default: 5000 + rx-fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + It is a quirk used to work around Gen1 isoc-in endpoint transfer issue + that still send out unexpected ACK after device finishes the burst + transfer with a short packet and cause an exception, specially on a 4K + camera device, it happens on controller before about IPM v1.6.0; + the side-effect is that it may cause performance drop about 10%, + including bulk transfer, prefer to use 3k here. The size is in bytes. + enum: [1024, 2048, 3072, 4096] + # the following properties are only used for case 1 wakeup-source: description: enable USB remote wakeup, see power/wakeup-source.txt diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml index 28eb25ecba74..eaedb4cc6b6c 100644 --- a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml +++ b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: NXP PTN5110 Typec Port Cotroller +title: NXP PTN5110 Type-C Port Controller maintainers: - Li Jun <jun.li@nxp.com> diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index 915c8205623b..63d150b216c5 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -46,6 +46,8 @@ properties: - qcom,sm8350-dwc3 - qcom,sm8450-dwc3 - qcom,sm8550-dwc3 + - qcom,sm8650-dwc3 + - qcom,x1e80100-dwc3 - const: qcom,dwc3 reg: @@ -97,12 +99,29 @@ properties: - const: apps-usb interrupts: - minItems: 1 - maxItems: 4 + description: | + Different types of interrupts are used based on HS PHY used on target: + - pwr_event: Used for wakeup based on other power events. + - hs_phY_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is + hs_phy_irq which is not triggered by default and its + functionality is mutually exclusive to that of + {dp/dm}_hs_phy_irq and qusb2_phy_irq. + - qusb2_phy: SoCs with QUSB2 PHY do not have separate DP/DM IRQs and + expose only a single IRQ whose behavior can be modified + by the QUSB2PHY_INTR_CTRL register. The required DPSE/ + DMSE configuration is done in QUSB2PHY_INTR_CTRL register + of PHY address space. + - {dp/dm}_hs_phy_irq: These IRQ's directly reflect changes on the DP/ + DM pads of the SoC. These are used for wakeup + only on SoCs with non-QUSB2 targets with + exception of SDM670/SDM845/SM6350. + - ss_phy_irq: Used for remote wakeup in Super Speed mode of operation. + minItems: 2 + maxItems: 5 interrupt-names: - minItems: 1 - maxItems: 4 + minItems: 2 + maxItems: 5 qcom,select-utmi-as-pipe-clk: description: @@ -263,6 +282,7 @@ allOf: contains: enum: - qcom,sc8280xp-dwc3 + - qcom,x1e80100-dwc3 then: properties: clocks: @@ -288,8 +308,8 @@ allOf: then: properties: clocks: - minItems: 5 - maxItems: 6 + minItems: 4 + maxItems: 5 clock-names: oneOf: - items: @@ -298,13 +318,11 @@ allOf: - const: iface - const: sleep - const: mock_utmi - - const: bus - items: - const: cfg_noc - const: core - const: sleep - const: mock_utmi - - const: bus - if: properties: @@ -318,6 +336,7 @@ allOf: - qcom,sm8250-dwc3 - qcom,sm8450-dwc3 - qcom,sm8550-dwc3 + - qcom,sm8650-dwc3 then: properties: clocks: @@ -357,59 +376,20 @@ allOf: compatible: contains: enum: - - qcom,ipq4019-dwc3 + - qcom,ipq5018-dwc3 - qcom,ipq6018-dwc3 - - qcom,ipq8064-dwc3 - qcom,ipq8074-dwc3 - - qcom,msm8994-dwc3 - - qcom,qcs404-dwc3 - - qcom,sc7180-dwc3 - - qcom,sdm670-dwc3 - - qcom,sdm845-dwc3 - - qcom,sdx55-dwc3 - - qcom,sdx65-dwc3 - - qcom,sdx75-dwc3 - - qcom,sm4250-dwc3 - - qcom,sm6125-dwc3 - - qcom,sm6350-dwc3 - - qcom,sm8150-dwc3 - - qcom,sm8250-dwc3 - - qcom,sm8350-dwc3 - - qcom,sm8450-dwc3 - - qcom,sm8550-dwc3 - then: - properties: - interrupts: - items: - - description: The interrupt that is asserted - when a wakeup event is received on USB2 bus. - - description: The interrupt that is asserted - when a wakeup event is received on USB3 bus. - - description: Wakeup event on DM line. - - description: Wakeup event on DP line. - interrupt-names: - items: - - const: hs_phy_irq - - const: ss_phy_irq - - const: dm_hs_phy_irq - - const: dp_hs_phy_irq - - - if: - properties: - compatible: - contains: - enum: - qcom,msm8953-dwc3 - - qcom,msm8996-dwc3 - qcom,msm8998-dwc3 - - qcom,sm6115-dwc3 then: properties: interrupts: - maxItems: 2 + minItems: 2 + maxItems: 3 interrupt-names: items: - - const: hs_phy_irq + - const: pwr_event + - const: qusb2_phy - const: ss_phy_irq - if: @@ -417,37 +397,21 @@ allOf: compatible: contains: enum: - - qcom,ipq5018-dwc3 - - qcom,ipq5332-dwc3 + - qcom,msm8996-dwc3 + - qcom,qcs404-dwc3 - qcom,sdm660-dwc3 - then: - properties: - interrupts: - minItems: 1 - maxItems: 2 - interrupt-names: - minItems: 1 - items: - - const: hs_phy_irq - - const: ss_phy_irq - - - if: - properties: - compatible: - contains: - enum: - - qcom,sc7280-dwc3 + - qcom,sm6115-dwc3 + - qcom,sm6125-dwc3 then: properties: interrupts: minItems: 3 maxItems: 4 interrupt-names: - minItems: 3 items: + - const: pwr_event + - const: qusb2_phy - const: hs_phy_irq - - const: dp_hs_phy_irq - - const: dm_hs_phy_irq - const: ss_phy_irq - if: @@ -455,7 +419,8 @@ allOf: compatible: contains: enum: - - qcom,sc8280xp-dwc3 + - qcom,ipq5332-dwc3 + - qcom,x1e80100-dwc3 then: properties: interrupts: @@ -472,16 +437,35 @@ allOf: compatible: contains: enum: + - qcom,ipq4019-dwc3 + - qcom,ipq8064-dwc3 + - qcom,msm8994-dwc3 - qcom,sa8775p-dwc3 + - qcom,sc7180-dwc3 + - qcom,sc7280-dwc3 + - qcom,sc8280xp-dwc3 + - qcom,sdm670-dwc3 + - qcom,sdm845-dwc3 + - qcom,sdx55-dwc3 + - qcom,sdx65-dwc3 + - qcom,sdx75-dwc3 + - qcom,sm4250-dwc3 + - qcom,sm6350-dwc3 + - qcom,sm8150-dwc3 + - qcom,sm8250-dwc3 + - qcom,sm8350-dwc3 + - qcom,sm8450-dwc3 + - qcom,sm8550-dwc3 + - qcom,sm8650-dwc3 then: properties: interrupts: - minItems: 3 - maxItems: 4 + minItems: 4 + maxItems: 5 interrupt-names: - minItems: 3 items: - const: pwr_event + - const: hs_phy_irq - const: dp_hs_phy_irq - const: dm_hs_phy_irq - const: ss_phy_irq @@ -519,12 +503,13 @@ examples: <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <150000000>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>, <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>, - <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; diff --git a/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml b/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml new file mode 100644 index 000000000000..7ddfd3313a18 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/qcom,wcd939x-usbss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm WCD9380/WCD9385 USB SubSystem Altmode/Analog Audio Switch + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +description: + Qualcomm WCD9390/WCD9395 is a standalone Hi-Fi audio codec IC with a + functionally separate USB SubSystem for Altmode/Analog Audio Switch + accessible over an I2C interface. + The Audio Headphone and Microphone data path between the Codec and the + USB-C Mux subsystems are external to the IC, thus requiring DT port-endpoint + graph description to handle USB-C altmode & orientation switching for Audio + Accessory Mode. + +properties: + compatible: + oneOf: + - const: qcom,wcd9390-usbss + - items: + - const: qcom,wcd9395-usbss + - const: qcom,wcd9390-usbss + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + vdd-supply: + description: USBSS VDD power supply + + mode-switch: + description: Flag the port as possible handle of altmode switching + type: boolean + + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the WCD939x USB SubSystem to a TypeC controller for the + purpose of handling altmode muxing and orientation switching. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the WCD939x USB SubSystem to the Codec SubSystem for the + purpose of handling USB-C Audio Accessory Mode muxing and orientation switching. + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + typec-mux@42 { + compatible = "qcom,wcd9390-usbss"; + reg = <0x42>; + + vdd-supply = <&vreg_bob>; + + mode-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + wcd9390_usbss_sbu: endpoint { + remote-endpoint = <&typec_sbu>; + }; + }; + port@1 { + reg = <1>; + wcd9390_usbss_codec: endpoint { + remote-endpoint = <&wcd9390_codec_usbss>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index bad55dfb2fa0..40ada78f2328 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -19,7 +19,7 @@ properties: - items: - enum: - renesas,usbhs-r7s9210 # RZ/A2 - - renesas,usbhs-r9a07g043 # RZ/G2UL + - renesas,usbhs-r9a07g043 # RZ/G2UL and RZ/Five - renesas,usbhs-r9a07g044 # RZ/G2{L,LC} - renesas,usbhs-r9a07g054 # RZ/V2L - const: renesas,rza2-usbhs diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index ee5af4b381b1..203a1eb66691 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -432,6 +432,10 @@ properties: items: enum: [1, 4, 8, 16, 32, 64, 128, 256] + num-hc-interrupters: + maximum: 8 + default: 1 + port: $ref: /schemas/graph.yaml#/properties/port description: diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml index 323d664ae06a..1745e28b3110 100644 --- a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml +++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml @@ -38,6 +38,10 @@ properties: - const: main - const: patch-address + reset-gpios: + description: GPIO used for the HRESET pin. + maxItems: 1 + wakeup-source: true interrupts: @@ -90,6 +94,7 @@ additionalProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; @@ -106,6 +111,7 @@ examples: pinctrl-names = "default"; pinctrl-0 = <&typec_pins>; + reset-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; typec_con: connector { compatible = "usb-c-connector"; diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.yaml b/Documentation/devicetree/bindings/usb/usb-xhci.yaml index 180a261c3e8f..4238ae896ef6 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/usb-xhci.yaml @@ -29,6 +29,12 @@ properties: description: Interrupt moderation interval default: 5000 + num-hc-interrupters: + description: Maximum number of interrupters to allocate + $ref: /schemas/types.yaml#/definitions/uint16 + minimum: 1 + maximum: 1024 + additionalProperties: true examples: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 871f38fef3c4..1a0dc04f1db4 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -121,6 +121,8 @@ patternProperties: description: Andes Technology Corporation "^anvo,.*": description: Anvo-Systems Dresden GmbH + "^aosong,.*": + description: Guangzhou Aosong Electronic Co., Ltd. "^apm,.*": description: Applied Micro Circuits Corporation (APM) "^apple,.*": @@ -1295,6 +1297,8 @@ patternProperties: description: Skyworks Solutions, Inc. "^smartlabs,.*": description: SmartLabs LLC + "^smi,.*": + description: Silicon Motion Technology Corporation "^smsc,.*": description: Standard Microsystems Corporation "^snps,.*": diff --git a/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml b/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml new file mode 100644 index 000000000000..ef70fa2c0c5d --- /dev/null +++ b/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/w1/amd,axi-1wire-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMD AXI 1-wire bus host for programmable logic + +maintainers: + - Kris Chaplin <kris.chaplin@amd.com> + +properties: + compatible: + const: amd,axi-1wire-host + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + onewire@a0000000 { + compatible = "amd,axi-1wire-host"; + reg = <0xa0000000 0x10000>; + clocks = <&zynqmp_clk 0x47>; + interrupts = <GIC_SPI 0x59 IRQ_TYPE_LEVEL_HIGH>; + }; + +... |