diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
188 files changed, 3045 insertions, 476 deletions
diff --git a/Documentation/devicetree/bindings/access-controllers/access-controllers.yaml b/Documentation/devicetree/bindings/access-controllers/access-controllers.yaml new file mode 100644 index 000000000000..99e2865f0e46 --- /dev/null +++ b/Documentation/devicetree/bindings/access-controllers/access-controllers.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/access-controllers/access-controllers.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic Domain Access Controllers + +maintainers: + - Oleksii Moisieiev <oleksii_moisieiev@epam.com> + +description: |+ + Common access controllers properties + + Access controllers are in charge of stating which of the hardware blocks under + their responsibility (their domain) can be accesssed by which compartment. A + compartment can be a cluster of CPUs (or coprocessors), a range of addresses + or a group of hardware blocks. An access controller's domain is the set of + resources covered by the access controller. + + This device tree binding can be used to bind devices to their access + controller provided by access-controllers property. In this case, the device + is a consumer and the access controller is the provider. + + An access controller can be represented by any node in the device tree and + can provide one or more configuration parameters, needed to control parameters + of the consumer device. A consumer node can refer to the provider by phandle + and a set of phandle arguments, specified by '#access-controller-cells' + property in the access controller node. + + Access controllers are typically used to set/read the permissions of a + hardware block and grant access to it. Any of which depends on the access + controller. The capabilities of each access controller are defined by the + binding of the access controller device. + + Each node can be a consumer for the several access controllers. + +# always select the core schema +select: true + +properties: + "#access-controller-cells": + description: + Number of cells in an access-controllers specifier; + Can be any value as specified by device tree binding documentation + of a particular provider. The node is an access controller. + + access-controller-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: + A list of access-controllers names, sorted in the same order as + access-controllers entries. Consumer drivers will use + access-controller-names to match with existing access-controllers entries. + + access-controllers: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + A list of access controller specifiers, as defined by the + bindings of the access-controllers provider. + +additionalProperties: true + +examples: + - | + clock_controller: access-controllers@50000 { + reg = <0x50000 0x400>; + #access-controller-cells = <2>; + }; + + bus_controller: bus@60000 { + reg = <0x60000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + #access-controller-cells = <3>; + + uart4: serial@60100 { + reg = <0x60100 0x400>; + clocks = <&clk_serial>; + access-controllers = <&clock_controller 1 2>, + <&bus_controller 1 3 5>; + access-controller-names = "clock", "bus"; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml index 4cc4e6754681..d925e7a3b5ef 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml @@ -53,6 +53,7 @@ properties: - description: BCM4709 based boards items: - enum: + - asus,rt-ac3200 - asus,rt-ac87u - buffalo,wxr-1900dhp - linksys,ea9200 @@ -67,6 +68,7 @@ properties: items: - enum: - asus,rt-ac3100 + - asus,rt-ac5300 - asus,rt-ac88u - dlink,dir-885l - dlink,dir-890l diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml index 39e3c248f5b7..1f84407a73e4 100644 --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml @@ -46,6 +46,30 @@ properties: - compatible - "#clock-cells" + gpio: + type: object + additionalProperties: false + + properties: + compatible: + const: raspberrypi,firmware-gpio + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: + The first cell is the pin number, and the second cell is used to + specify the gpio polarity (GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW). + + gpio-line-names: + minItems: 8 + + required: + - compatible + - gpio-controller + - "#gpio-cells" + reset: type: object additionalProperties: false @@ -96,6 +120,12 @@ examples: #clock-cells = <1>; }; + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + reset: reset { compatible = "raspberrypi,firmware-reset"; #reset-cells = <1>; diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 0027201e19f8..6d185d09cb6a 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -813,6 +813,14 @@ properties: - const: tq,imx6ull-tqma6ull2l # MCIMX6Y2, LGA SoM variant - const: fsl,imx6ull + - description: Seeed Stuido i.MX6ULL SoM on dev boards + items: + - enum: + - seeed,imx6ull-seeed-npi-emmc + - seeed,imx6ull-seeed-npi-nand + - const: seeed,imx6ull-seeed-npi + - const: fsl,imx6ull + - description: i.MX6ULZ based Boards items: - enum: @@ -1050,6 +1058,7 @@ properties: - enum: - beacon,imx8mp-beacon-kit # i.MX8MP Beacon Development Kit - dmo,imx8mp-data-modul-edm-sbc # i.MX8MP eDM SBC + - emcraft,imx8mp-navqp # i.MX8MP Emcraft Systems NavQ+ Kit - fsl,imx8mp-evk # i.MX8MP EVK Board - gateworks,imx8mp-gw71xx-2x # i.MX8MP Gateworks Board - gateworks,imx8mp-gw72xx-2x # i.MX8MP Gateworks Board @@ -1218,7 +1227,6 @@ properties: - enum: - einfochips,imx8qxp-ai_ml # i.MX8QXP AI_ML Board - fsl,imx8qxp-mek # i.MX8QXP MEK Board - - toradex,colibri-imx8x # Colibri iMX8X Modules - const: fsl,imx8qxp - description: i.MX8DXL based Boards @@ -1227,7 +1235,7 @@ properties: - fsl,imx8dxl-evk # i.MX8DXL EVK Board - const: fsl,imx8dxl - - description: i.MX8QXP Boards with Toradex Colibri iMX8X Modules + - description: i.MX8QXP/i.MX8DX Boards with Toradex Colibri iMX8X Modules items: - enum: - toradex,colibri-imx8x-aster # Colibri iMX8X Module on Aster Board @@ -1235,7 +1243,9 @@ properties: - toradex,colibri-imx8x-iris # Colibri iMX8X Module on Iris Board - toradex,colibri-imx8x-iris-v2 # Colibri iMX8X Module on Iris Board V2 - const: toradex,colibri-imx8x - - const: fsl,imx8qxp + - enum: + - fsl,imx8qxp + - fsl,imx8dx - description: TQMa8Xx is a series of SOM featuring NXP i.MX8X system-on-chip @@ -1536,6 +1546,12 @@ properties: - nxp,s32g274a-rdb2 - const: nxp,s32g2 + - description: S32G3 based Boards + items: + - enum: + - nxp,s32g399a-rdb3 + - const: nxp,s32g3 + - description: S32V234 based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml index c24ad0968f3e..7f06b1080244 100644 --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml @@ -61,10 +61,6 @@ properties: mboxes: minItems: 2 - ti,system-reboot-controller: - description: Determines If system reboot can be triggered by SoC reboot - type: boolean - ti,host-id: $ref: /schemas/types.yaml#/definitions/uint32 description: | @@ -94,7 +90,6 @@ examples: - | pmmc: system-controller@2921800 { compatible = "ti,k2g-sci"; - ti,system-reboot-controller; mbox-names = "rx", "tx"; mboxes = <&msgmgr 5 2>, <&msgmgr 0 0>; diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml index 61ddc3b5b247..8eec07d9d454 100644 --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml @@ -44,14 +44,21 @@ properties: minItems: 1 maxItems: 2 - qcom,dsb-element-size: + qcom,dsb-element-bits: description: Specifies the DSB(Discrete Single Bit) element size supported by the monitor. The associated aggregator will read this size before it is enabled. DSB element size currently only supports 32-bit and 64-bit. - $ref: /schemas/types.yaml#/definitions/uint8 enum: [32, 64] + qcom,cmb-element-bits: + description: + Specifies the CMB(Continuous Multi-Bit) element size supported by + the monitor. The associated aggregator will read this size before it + is enabled. CMB element size currently only supports 8-bit, 32-bit + and 64-bit. + enum: [8, 32, 64] + qcom,dsb-msrs-num: description: Specifies the number of DSB(Discrete Single Bit) MSR(mux select register) @@ -61,6 +68,15 @@ properties: minimum: 0 maximum: 32 + qcom,cmb-msrs-num: + description: + Specifies the number of CMB MSR(mux select register) registers supported + by the monitor. If this property is not configured or set to 0, it means + this TPDM doesn't support CMB MSR. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 32 + clocks: maxItems: 1 @@ -94,7 +110,7 @@ examples: compatible = "qcom,coresight-tpdm", "arm,primecell"; reg = <0x0684c000 0x1000>; - qcom,dsb-element-size = /bits/ 8 <32>; + qcom,dsb-element-bits = <32>; qcom,dsb-msrs-num = <16>; clocks = <&aoss_qmp>; @@ -110,4 +126,22 @@ examples: }; }; + tpdm@6c29000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x06c29000 0x1000>; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_ipcc_out_funnel_center: endpoint { + remote-endpoint = <&funnel_center_in_tpdm_ipcc>; + }; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 66beaac60e1d..ae885414b181 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -137,6 +137,7 @@ properties: - microsoft,dempsey - microsoft,makepeace - microsoft,moneypenny + - motorola,falcon - samsung,s3ve3g - const: qcom,msm8226 @@ -184,13 +185,16 @@ properties: - oneplus,bacon - samsung,klte - sony,xperia-castor + - sony,xperia-leo - const: qcom,msm8974pro - const: qcom,msm8974 - items: - - const: qcom,msm8916-mtp - - const: qcom,msm8916-mtp/1 - - const: qcom,msm8916 + - enum: + - samsung,kltechn + - const: samsung,klte + - const: qcom,msm8974pro + - const: qcom,msm8974 - items: - enum: @@ -200,6 +204,8 @@ properties: - gplus,fl8005a - huawei,g7 - longcheer,l8910 + - longcheer,l8150 + - qcom,msm8916-mtp - samsung,a3u-eur - samsung,a5u-eur - samsung,e5 @@ -221,11 +227,6 @@ properties: - const: qcom,msm8916 - items: - - const: longcheer,l8150 - - const: qcom,msm8916-v1-qrd/9-v1 - - const: qcom,msm8916 - - - items: - enum: - motorola,potter - xiaomi,daisy @@ -1003,6 +1004,7 @@ properties: - qcom,sm8550-hdk - qcom,sm8550-mtp - qcom,sm8550-qrd + - sony,pdx234 - const: qcom,sm8550 - items: diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index fcf7316ecd74..e04c213a0dee 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -49,6 +49,11 @@ properties: - anbernic,rg-arc-s - const: rockchip,rk3566 + - description: ArmSoM Sige7 board + items: + - const: armsom,sige7 + - const: rockchip,rk3588 + - description: Asus Tinker board items: - const: asus,rk3288-tinker @@ -198,6 +203,13 @@ properties: - const: firefly,rk3568-roc-pc - const: rockchip,rk3568 + - description: Forlinx FET3588-C SoM + items: + - enum: + - forlinx,ok3588-c + - const: forlinx,fet3588-c + - const: rockchip,rk3588 + - description: FriendlyElec NanoPi R2 series boards items: - enum: @@ -236,6 +248,11 @@ properties: - const: friendlyarm,nanopc-t6 - const: rockchip,rk3588 + - description: GameForce Chi + items: + - const: gameforce,chi + - const: rockchip,rk3326 + - description: GeekBuying GeekBox items: - const: geekbuying,geekbox @@ -631,7 +648,7 @@ properties: - const: phytec,rk3288-phycore-som - const: rockchip,rk3288 - - description: Pine64 PinebookPro + - description: Pine64 Pinebook Pro items: - const: pine64,pinebook-pro - const: rockchip,rk3399 @@ -644,7 +661,7 @@ properties: - const: pine64,pinenote - const: rockchip,rk3566 - - description: Pine64 PinePhonePro + - description: Pine64 PinePhone Pro items: - const: pine64,pinephone-pro - const: rockchip,rk3399 @@ -682,7 +699,7 @@ properties: - const: pine64,quartzpro64 - const: rockchip,rk3588 - - description: Pine64 SoQuartz SoM + - description: Pine64 SOQuartz items: - enum: - pine64,soquartz-blade @@ -700,12 +717,17 @@ properties: - powkiddy,x55 - const: rockchip,rk3566 + - description: Protonic MECSBC board + items: + - const: prt,mecsbc + - const: rockchip,rk3568 + - description: QNAP TS-433-4G 4-Bay NAS items: - const: qnap,ts433 - const: rockchip,rk3568 - - description: Radxa Compute Module 3(CM3) + - description: Radxa Compute Module 3 (CM3) items: - enum: - radxa,cm3-io @@ -767,22 +789,27 @@ properties: - const: radxa,rockpis - const: rockchip,rk3308 - - description: Radxa Rock2 Square + - description: Radxa Rock 2 Square items: - const: radxa,rock2-square - const: rockchip,rk3288 - - description: Radxa ROCK3 Model A + - description: Radxa ROCK 3A items: - const: radxa,rock3a - const: rockchip,rk3568 - - description: Radxa ROCK 5 Model A + - description: Radxa ROCK 3C + items: + - const: radxa,rock-3c + - const: rockchip,rk3566 + + - description: Radxa ROCK 5A items: - const: radxa,rock-5a - const: rockchip,rk3588s - - description: Radxa ROCK 5 Model B + - description: Radxa ROCK 5B items: - const: radxa,rock-5b - const: rockchip,rk3588 @@ -927,6 +954,11 @@ properties: - const: turing,rk1 - const: rockchip,rk3588 + - description: WolfVision PF5 mainboard + items: + - const: wolfvision,rk3568-pf5 + - const: rockchip,rk3568 + - description: Xunlong Orange Pi 5 Plus items: - const: xunlong,orangepi-5-plus diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 09d835db6db5..c6d0d8d81ed4 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -56,6 +56,21 @@ properties: - const: anbernic,rg-nano - const: allwinner,sun8i-v3s + - description: Anbernic RG35XX (2024) + - items: + - const: anbernic,rg35xx-2024 + - const: allwinner,sun50i-h700 + + - description: Anbernic RG35XX Plus + - items: + - const: anbernic,rg35xx-plus + - const: allwinner,sun50i-h700 + + - description: Anbernic RG35XX H + - items: + - const: anbernic,rg35xx-h + - const: allwinner,sun50i-h700 + - description: Amarula A64 Relic items: - const: amarula,a64-relic @@ -774,6 +789,11 @@ properties: - const: pocketbook,touch-lux-3 - const: allwinner,sun5i-a13 + - description: PocketBook 614 Plus + items: + - const: pocketbook,614-plus + - const: allwinner,sun5i-a13 + - description: Point of View Protab2-IPS9 items: - const: pov,protab2-ips9 @@ -860,6 +880,11 @@ properties: - const: allwinner,sl631 - const: allwinner,sun8i-v3 + - description: Tanix TX1 + items: + - const: oranth,tanix-tx1 + - const: allwinner,sun50i-h616 + - description: Tanix TX6 items: - const: oranth,tanix-tx6 diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml index 3aaefdbe361e..9017c5a3f3d2 100644 --- a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml +++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml @@ -18,6 +18,7 @@ properties: - const: brcm,gisb-arb - items: - enum: + - brcm,bcm74165-gisb-arb # for V7 new style 16nm chips - brcm,bcm7278-gisb-arb # for V7 28nm chips - brcm,bcm7435-gisb-arb # for newer 40nm chips - brcm,bcm7400-gisb-arb # for older 40nm chips and all 65nm chips diff --git a/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml b/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml new file mode 100644 index 000000000000..d12b62a3a5a8 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/st,stm32-etzpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STM32 Extended TrustZone protection controller + +description: | + The ETZPC configures TrustZone security in a SoC having bus masters and + devices with programmable-security attributes (securable resources). + +maintainers: + - Gatien Chevallier <gatien.chevallier@foss.st.com> + +select: + properties: + compatible: + contains: + const: st,stm32-etzpc + required: + - compatible + +properties: + compatible: + items: + - const: st,stm32-etzpc + - const: simple-bus + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + + "#access-controller-cells": + const: 1 + description: + Contains the firewall ID associated to the peripheral. + +patternProperties: + "^.*@[0-9a-f]+$": + description: Peripherals + type: object + + additionalProperties: true + + required: + - access-controllers + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - "#access-controller-cells" + - ranges + +additionalProperties: false + +examples: + - | + // In this example, the usart2 device refers to rifsc as its access + // controller. + // Access rights are verified before creating devices. + + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp13-clks.h> + #include <dt-bindings/reset/stm32mp13-resets.h> + + etzpc: bus@5c007000 { + compatible = "st,stm32-etzpc", "simple-bus"; + reg = <0x5c007000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + #access-controller-cells = <1>; + ranges; + + usart2: serial@4c001000 { + compatible = "st,stm32h7-uart"; + reg = <0x4c001000 0x400>; + interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART2_K>; + resets = <&rcc USART2_R>; + wakeup-source; + dmas = <&dmamux1 43 0x400 0x5>, + <&dmamux1 44 0x400 0x1>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 17>; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml b/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml new file mode 100644 index 000000000000..20acd1a6b173 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/st,stm32mp25-rifsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STM32 Resource isolation framework security controller + +maintainers: + - Gatien Chevallier <gatien.chevallier@foss.st.com> + +description: | + Resource isolation framework (RIF) is a comprehensive set of hardware blocks + designed to enforce and manage isolation of STM32 hardware resources like + memory and peripherals. + + The RIFSC (RIF security controller) is composed of three sets of registers, + each managing a specific set of hardware resources: + - RISC registers associated with RISUP logic (resource isolation device unit + for peripherals), assign all non-RIF aware peripherals to zero, one or + any security domains (secure, privilege, compartment). + - RIMC registers: associated with RIMU logic (resource isolation master + unit), assign all non RIF-aware bus master to one security domain by + setting secure, privileged and compartment information on the system bus. + Alternatively, the RISUP logic controlling the device port access to a + peripheral can assign target bus attributes to this peripheral master port + (supported attribute: CID). + - RISC registers associated with RISAL logic (resource isolation device unit + for address space - Lite version), assign address space subregions to one + security domains (secure, privilege, compartment). + +select: + properties: + compatible: + contains: + const: st,stm32mp25-rifsc + required: + - compatible + +properties: + compatible: + items: + - const: st,stm32mp25-rifsc + - const: simple-bus + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + + "#access-controller-cells": + const: 1 + description: + Contains the firewall ID associated to the peripheral. + +patternProperties: + "^.*@[0-9a-f]+$": + description: Peripherals + type: object + + additionalProperties: true + + required: + - access-controllers + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - "#access-controller-cells" + - ranges + +additionalProperties: false + +examples: + - | + // In this example, the usart2 device refers to rifsc as its domain + // controller. + // Access rights are verified before creating devices. + + #include <dt-bindings/interrupt-controller/arm-gic.h> + + rifsc: bus@42080000 { + compatible = "st,stm32mp25-rifsc", "simple-bus"; + reg = <0x42080000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + #access-controller-cells = <1>; + ranges; + + usart2: serial@400e0000 { + compatible = "st,stm32h7-uart"; + reg = <0x400e0000 0x400>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ck_flexgen_08>; + access-controllers = <&rifsc 32>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml index 1d2bcea41c85..caf442ead24b 100644 --- a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml +++ b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml @@ -30,16 +30,18 @@ properties: - google,gs101-cmu-top - google,gs101-cmu-apm - google,gs101-cmu-misc + - google,gs101-cmu-hsi0 + - google,gs101-cmu-hsi2 - google,gs101-cmu-peric0 - google,gs101-cmu-peric1 clocks: minItems: 1 - maxItems: 3 + maxItems: 5 clock-names: minItems: 1 - maxItems: 3 + maxItems: 5 "#clock-cells": const: 1 @@ -76,6 +78,55 @@ allOf: properties: compatible: contains: + const: google,gs101-cmu-hsi0 + + then: + properties: + clocks: + items: + - description: External reference clock (24.576 MHz) + - description: HSI0 bus clock (from CMU_TOP) + - description: DPGTC (from CMU_TOP) + - description: USB DRD controller clock (from CMU_TOP) + - description: USB Display Port debug clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: bus + - const: dpgtc + - const: usb31drd + - const: usbdpdbg + + - if: + properties: + compatible: + contains: + enum: + - google,gs101-cmu-hsi2 + + then: + properties: + clocks: + items: + - description: External reference clock (24.576 MHz) + - description: High Speed Interface bus clock (from CMU_TOP) + - description: High Speed Interface pcie clock (from CMU_TOP) + - description: High Speed Interface ufs clock (from CMU_TOP) + - description: High Speed Interface mmc clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: bus + - const: pcie + - const: ufs + - const: mmc + + - if: + properties: + compatible: + contains: const: google,gs101-cmu-misc then: diff --git a/Documentation/devicetree/bindings/clock/keystone-gate.txt b/Documentation/devicetree/bindings/clock/keystone-gate.txt index c5aa187026e3..43f6fb6c9392 100644 --- a/Documentation/devicetree/bindings/clock/keystone-gate.txt +++ b/Documentation/devicetree/bindings/clock/keystone-gate.txt @@ -1,5 +1,3 @@ -Status: Unstable - ABI compatibility may be broken in the future - Binding for Keystone gate control driver which uses PSC controller IP. This binding uses the common clock binding[1]. diff --git a/Documentation/devicetree/bindings/clock/keystone-pll.txt b/Documentation/devicetree/bindings/clock/keystone-pll.txt index 9a3fbc665606..69b0eb7c03c9 100644 --- a/Documentation/devicetree/bindings/clock/keystone-pll.txt +++ b/Documentation/devicetree/bindings/clock/keystone-pll.txt @@ -1,5 +1,3 @@ -Status: Unstable - ABI compatibility may be broken in the future - Binding for keystone PLLs. The main PLL IP typically has a multiplier, a divider and a post divider. The additional PLL IPs like ARMPLL, DDRPLL and PAPLL are controlled by the memory mapped register where as the Main diff --git a/Documentation/devicetree/bindings/clock/ti/adpll.txt b/Documentation/devicetree/bindings/clock/ti/adpll.txt index 4c8a2ce2cd70..3122360adcf3 100644 --- a/Documentation/devicetree/bindings/clock/ti/adpll.txt +++ b/Documentation/devicetree/bindings/clock/ti/adpll.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments ADPLL clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped ADPLL with two to three selectable input clocks and three to four children. diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt index ade4dd4c30f0..bbd505c1199d 100644 --- a/Documentation/devicetree/bindings/clock/ti/apll.txt +++ b/Documentation/devicetree/bindings/clock/ti/apll.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments APLL clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped APLL with usually two selectable input clocks (reference clock and bypass clock), with analog phase locked diff --git a/Documentation/devicetree/bindings/clock/ti/autoidle.txt b/Documentation/devicetree/bindings/clock/ti/autoidle.txt index 7c735dde9fe9..05645a10a9e3 100644 --- a/Documentation/devicetree/bindings/clock/ti/autoidle.txt +++ b/Documentation/devicetree/bindings/clock/ti/autoidle.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments autoidle clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register mapped clock which can be put to idle automatically by hardware based on the usage and a configuration bit setting. Autoidle clock is never an individual diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt index 9c6199249ce5..edf0b5d42768 100644 --- a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt +++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments clockdomain. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1] in consumer role. Every clock on TI SoC belongs to one clockdomain, but software only needs this information for specific clocks which require diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt index 33ac7c9ad053..6f7e1331b546 100644 --- a/Documentation/devicetree/bindings/clock/ti/composite.txt +++ b/Documentation/devicetree/bindings/clock/ti/composite.txt @@ -1,7 +1,5 @@ Binding for TI composite clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped composite clock with multiple different sub-types; diff --git a/Documentation/devicetree/bindings/clock/ti/divider.txt b/Documentation/devicetree/bindings/clock/ti/divider.txt index 9b13b32974f9..4d7c76f0b356 100644 --- a/Documentation/devicetree/bindings/clock/ti/divider.txt +++ b/Documentation/devicetree/bindings/clock/ti/divider.txt @@ -1,7 +1,5 @@ Binding for TI divider clock -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped adjustable clock rate divider that does not gate and has only one input clock or parent. By default the value programmed into diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt index 37a7cb6ad07d..14a1b72c2e71 100644 --- a/Documentation/devicetree/bindings/clock/ti/dpll.txt +++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments DPLL clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped DPLL with usually two selectable input clocks (reference clock and bypass clock), with digital phase locked diff --git a/Documentation/devicetree/bindings/clock/ti/fapll.txt b/Documentation/devicetree/bindings/clock/ti/fapll.txt index c19b3f253b8c..88986ef39ddd 100644 --- a/Documentation/devicetree/bindings/clock/ti/fapll.txt +++ b/Documentation/devicetree/bindings/clock/ti/fapll.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments FAPLL clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped FAPLL with usually two selectable input clocks (reference clock and bypass clock), and one or more child diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt index 518e3c142276..dc69477b6e98 100644 --- a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt +++ b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt @@ -1,7 +1,5 @@ Binding for TI fixed factor rate clock sources. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1], and also uses the autoidle support from TI autoidle clock [2]. diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt index 4982615c01b9..a8e0335b006a 100644 --- a/Documentation/devicetree/bindings/clock/ti/gate.txt +++ b/Documentation/devicetree/bindings/clock/ti/gate.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments gate clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. This clock is quite much similar to the basic gate-clock [2], however, it supports a number of additional features. If no register diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt index d3eb5ca92a7f..85fb1f2d2d28 100644 --- a/Documentation/devicetree/bindings/clock/ti/interface.txt +++ b/Documentation/devicetree/bindings/clock/ti/interface.txt @@ -1,7 +1,5 @@ Binding for Texas Instruments interface clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. This clock is quite much similar to the basic gate-clock [2], however, it supports a number of additional features, including diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt index b33f641f1043..cd56d3c1c09f 100644 --- a/Documentation/devicetree/bindings/clock/ti/mux.txt +++ b/Documentation/devicetree/bindings/clock/ti/mux.txt @@ -1,7 +1,5 @@ Binding for TI mux clock. -Binding status: Unstable - ABI compatibility may be broken in the future - This binding uses the common clock binding[1]. It assumes a register-mapped multiplexer with multiple input clock signals or parents, one of which can be selected as output. This clock does not diff --git a/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-aes.yaml b/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-aes.yaml new file mode 100644 index 000000000000..cb47ae2889b6 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-aes.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/nvidia,tegra234-se-aes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Security Engine for AES algorithms + +description: + The Tegra Security Engine accelerates the following AES encryption/decryption + algorithms - AES-ECB, AES-CBC, AES-OFB, AES-XTS, AES-CTR, AES-GCM, AES-CCM, + AES-CMAC + +maintainers: + - Akhil R <akhilrajeev@nvidia.com> + +properties: + compatible: + const: nvidia,tegra234-se-aes + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + iommus: + maxItems: 1 + + dma-coherent: true + +required: + - compatible + - reg + - clocks + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/memory/tegra234-mc.h> + #include <dt-bindings/clock/tegra234-clock.h> + + crypto@15820000 { + compatible = "nvidia,tegra234-se-aes"; + reg = <0x15820000 0x10000>; + clocks = <&bpmp TEGRA234_CLK_SE>; + iommus = <&smmu TEGRA234_SID_SES_SE1>; + dma-coherent; + }; +... diff --git a/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-hash.yaml b/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-hash.yaml new file mode 100644 index 000000000000..f57ef10645e2 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-hash.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/nvidia,tegra234-se-hash.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Security Engine for HASH algorithms + +description: + The Tegra Security HASH Engine accelerates the following HASH functions - + SHA1, SHA224, SHA256, SHA384, SHA512, SHA3-224, SHA3-256, SHA3-384, SHA3-512 + HMAC(SHA224), HMAC(SHA256), HMAC(SHA384), HMAC(SHA512) + +maintainers: + - Akhil R <akhilrajeev@nvidia.com> + +properties: + compatible: + const: nvidia,tegra234-se-hash + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + iommus: + maxItems: 1 + + dma-coherent: true + +required: + - compatible + - reg + - clocks + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/memory/tegra234-mc.h> + #include <dt-bindings/clock/tegra234-clock.h> + + crypto@15840000 { + compatible = "nvidia,tegra234-se-hash"; + reg = <0x15840000 0x10000>; + clocks = <&bpmp TEGRA234_CLK_SE>; + iommus = <&smmu TEGRA234_SID_SES_SE2>; + dma-coherent; + }; +... diff --git a/Documentation/devicetree/bindings/crypto/omap-sham.txt b/Documentation/devicetree/bindings/crypto/omap-sham.txt deleted file mode 100644 index ad9115569611..000000000000 --- a/Documentation/devicetree/bindings/crypto/omap-sham.txt +++ /dev/null @@ -1,28 +0,0 @@ -OMAP SoC SHA crypto Module - -Required properties: - -- compatible : Should contain entries for this and backward compatible - SHAM versions: - - "ti,omap2-sham" for OMAP2 & OMAP3. - - "ti,omap4-sham" for OMAP4 and AM33XX. - - "ti,omap5-sham" for OMAP5, DRA7 and AM43XX. -- ti,hwmods: Name of the hwmod associated with the SHAM module -- reg : Offset and length of the register set for the module -- interrupts : the interrupt-specifier for the SHAM module. - -Optional properties: -- dmas: DMA specifiers for the rx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: DMA request name. Should be "rx" if a dma is present. - -Example: - /* AM335x */ - sham: sham@53100000 { - compatible = "ti,omap4-sham"; - ti,hwmods = "sham"; - reg = <0x53100000 0x200>; - interrupts = <109>; - dmas = <&edma 36>; - dma-names = "rx"; - }; diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml index e91bc7dc6ad3..0304f074cf08 100644 --- a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml @@ -15,6 +15,7 @@ properties: - enum: - qcom,sa8775p-inline-crypto-engine - qcom,sc7180-inline-crypto-engine + - qcom,sc7280-inline-crypto-engine - qcom,sm8450-inline-crypto-engine - qcom,sm8550-inline-crypto-engine - qcom,sm8650-inline-crypto-engine diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml index 0ddeb8a9a7a0..27354658d054 100644 --- a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml +++ b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml @@ -46,6 +46,10 @@ properties: power-domains: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml index ac480765cde0..822318414095 100644 --- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml +++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml @@ -51,6 +51,10 @@ properties: power-domains: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml index 71a2876bd6e4..7ccb6e1641d0 100644 --- a/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml +++ b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml @@ -12,7 +12,9 @@ maintainers: properties: compatible: - const: starfive,jh7110-crypto + enum: + - starfive,jh7110-crypto + - starfive,jh8100-crypto reg: maxItems: 1 @@ -28,7 +30,10 @@ properties: - const: ahb interrupts: - maxItems: 1 + minItems: 1 + items: + - description: SHA2 module irq + - description: SM3 module irq resets: maxItems: 1 @@ -54,6 +59,27 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + const: starfive,jh7110-crypto + + then: + properties: + interrupts: + maxItems: 1 + + - if: + properties: + compatible: + const: starfive,jh8100-crypto + + then: + properties: + interrupts: + minItems: 2 + examples: - | crypto: crypto@16000000 { diff --git a/Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml b/Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml new file mode 100644 index 000000000000..d69b50228009 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/ti,omap-sham.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OMAP SoC SHA crypto Module + +maintainers: + - Animesh Agarwal <animeshagarwal28@gmail.com> + +properties: + compatible: + enum: + - ti,omap2-sham + - ti,omap4-sham + - ti,omap5-sham + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dmas: + maxItems: 1 + + dma-names: + const: rx + + ti,hwmods: + description: Name of the hwmod associated with the SHAM module + $ref: /schemas/types.yaml#/definitions/string + enum: [sham] + +dependencies: + dmas: [dma-names] + +additionalProperties: false + +required: + - compatible + - ti,hwmods + - reg + - interrupts + +examples: + - | + sham@53100000 { + compatible = "ti,omap4-sham"; + ti,hwmods = "sham"; + reg = <0x53100000 0x200>; + interrupts = <109>; + dmas = <&edma 36>; + dma-names = "rx"; + }; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml index c0d6a4fdff97..e6dc5494baee 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml @@ -53,6 +53,15 @@ patternProperties: compatible: const: qcom,sm8150-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + contains: + const: qcom,sm8150-dp + "^dsi@[0-9a-f]+$": type: object additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index a95445f40870..397e810008bd 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -348,15 +348,6 @@ properties: # Yes Optoelectronics YTC700TLAG-05-201C 7" TFT LCD panel - yes-optoelectronics,ytc700tlag-05-201c - backlight: true - ddc-i2c-bus: true - enable-gpios: true - port: true - power-supply: true - no-hpd: true - hpd-gpios: true - data-mapping: true - if: not: properties: @@ -367,7 +358,7 @@ then: properties: data-mapping: false -additionalProperties: false +unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml index 94c5242c03b2..3563378a01af 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml @@ -182,6 +182,15 @@ allOf: compatible: contains: enum: + - nvidia,tegra194-host1x + then: + properties: + dma-coherent: true + - if: + properties: + compatible: + contains: + enum: - nvidia,tegra234-host1x then: properties: @@ -226,6 +235,8 @@ allOf: use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to usable stream IDs. + dma-coherent: true + required: - reg-names diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml index 329847ef096a..ff935a0068ec 100644 --- a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml +++ b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml @@ -82,6 +82,10 @@ properties: description: if defined, it indicates that the controller supports memory-to-memory transfer + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml index e722fbcd8a5f..ddf82bf1e71a 100644 --- a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml +++ b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml @@ -28,6 +28,10 @@ properties: resets: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/dts-coding-style.rst b/Documentation/devicetree/bindings/dts-coding-style.rst index a9bdd2b59dca..8a68331075a0 100644 --- a/Documentation/devicetree/bindings/dts-coding-style.rst +++ b/Documentation/devicetree/bindings/dts-coding-style.rst @@ -144,6 +144,8 @@ Example:: #dma-cells = <1>; clocks = <&clock_controller 0>, <&clock_controller 1>; clock-names = "bus", "host"; + #address-cells = <1>; + #size-cells = <1>; vendor,custom-property = <2>; status = "disabled"; diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index 1812ef31d5f1..3c36cd0510de 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -69,14 +69,10 @@ properties: - items: pattern: c32$ - items: - pattern: c32d-wl$ - - items: pattern: cs32$ - items: pattern: c64$ - items: - pattern: c64d-wl$ - - items: pattern: cs64$ - items: pattern: c128$ @@ -136,6 +132,7 @@ properties: - renesas,r1ex24128 - samsung,s524ad0xd1 - const: atmel,24c128 + - pattern: '^atmel,24c(32|64)d-wl$' # Actual vendor is st label: description: Descriptive name of the EEPROM. diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml index 4591523b51a0..7de2c29606e5 100644 --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml @@ -247,6 +247,37 @@ properties: reg: const: 0x18 + protocol@19: + type: object + allOf: + - $ref: '#/$defs/protocol-node' + - $ref: /schemas/pinctrl/pinctrl.yaml + + unevaluatedProperties: false + + properties: + reg: + const: 0x19 + + patternProperties: + '-pins$': + type: object + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml# + - $ref: /schemas/pinctrl/pinmux-node.yaml# + unevaluatedProperties: false + + description: + A pin multiplexing sub-node describes how to configure a + set of pins in some desired function. + A single sub-node may define several pin configurations. + This sub-node is using the default pinctrl bindings to configure + pin multiplexing and using SCMI protocol to apply a specified + configuration. + + required: + - reg + additionalProperties: false $defs: @@ -355,7 +386,7 @@ examples: scmi_dvfs: protocol@13 { reg = <0x13>; - #clock-cells = <1>; + #power-domain-cells = <1>; mboxes = <&mhuB 1 0>, <&mhuB 1 1>; @@ -401,6 +432,25 @@ examples: scmi_powercap: protocol@18 { reg = <0x18>; }; + + scmi_pinctrl: protocol@19 { + reg = <0x19>; + + i2c2-pins { + groups = "g_i2c2_a", "g_i2c2_b"; + function = "f_i2c2"; + }; + + mdio-pins { + groups = "g_avb_mdio"; + drive-strength = <24>; + }; + + keys_pins: keys-pins { + pins = "gpio_5_17", "gpio_5_20", "gpio_5_22", "gpio_2_1"; + bias-pull-up; + }; + }; }; }; @@ -468,7 +518,7 @@ examples: reg = <0x13>; linaro,optee-channel-id = <1>; shmem = <&cpu_optee_lpri0>; - #clock-cells = <1>; + #power-domain-cells = <1>; }; scmi_clk0: protocol@14 { diff --git a/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt b/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt deleted file mode 100644 index ce97265e23ba..000000000000 --- a/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt +++ /dev/null @@ -1,30 +0,0 @@ -Raspberry Pi GPIO expander - -The Raspberry Pi 3 GPIO expander is controlled by the VC4 firmware. The -firmware exposes a mailbox interface that allows the ARM core to control the -GPIO lines on the expander. - -The Raspberry Pi GPIO expander node must be a child node of the Raspberry Pi -firmware node. - -Required properties: - -- compatible : Should be "raspberrypi,firmware-gpio" -- gpio-controller : Marks the device node as a gpio controller -- #gpio-cells : Should be two. The first cell is the pin number, and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low - -Example: - -firmware: firmware-rpi { - compatible = "raspberrypi,bcm2835-firmware"; - mboxes = <&mailbox>; - - expgpio: gpio { - compatible = "raspberrypi,firmware-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; -}; diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml index 8386cfe21532..f0eabff86310 100644 --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml @@ -270,7 +270,7 @@ examples: port { ov7251_ep: endpoint { - data-lanes = <0 1>; + data-lanes = <0>; link-frequencies = /bits/ 64 <240000000 319200000>; remote-endpoint = <&csiphy3_ep>; }; diff --git a/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml index 16024415a4a7..44c54b162bb1 100644 --- a/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml @@ -14,9 +14,6 @@ description: The Nomadik I2C host controller began its life in the ST maintainers: - Linus Walleij <linus.walleij@linaro.org> -allOf: - - $ref: /schemas/i2c/i2c-controller.yaml# - # Need a custom select here or 'arm,primecell' will match on lots of nodes select: properties: @@ -24,21 +21,23 @@ select: contains: enum: - st,nomadik-i2c + - mobileye,eyeq5-i2c required: - compatible properties: compatible: oneOf: - # The variant found in STn8815 - items: - const: st,nomadik-i2c - const: arm,primecell - # The variant found in DB8500 - items: - const: stericsson,db8500-i2c - const: st,nomadik-i2c - const: arm,primecell + - items: + - const: mobileye,eyeq5-i2c + - const: arm,primecell reg: maxItems: 1 @@ -55,7 +54,7 @@ properties: - items: - const: mclk - const: apb_pclk - # Clock name in DB8500 + # Clock name in DB8500 or EyeQ5 - items: - const: i2cclk - const: apb_pclk @@ -70,6 +69,16 @@ properties: minimum: 1 maximum: 400000 + mobileye,olb: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to OLB system controller node. + - description: Platform-wide controller ID (integer starting from zero). + description: + The phandle pointing to OLB system controller node, with the I2C + controller index. + required: - compatible - reg @@ -79,6 +88,20 @@ required: unevaluatedProperties: false +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + properties: + compatible: + contains: + const: mobileye,eyeq5-i2c + then: + required: + - mobileye,olb + else: + properties: + mobileye,olb: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> @@ -111,5 +134,19 @@ examples: clocks = <&i2c0clk>, <&pclki2c0>; clock-names = "mclk", "apb_pclk"; }; + - | + #include <dt-bindings/interrupt-controller/mips-gic.h> + i2c@300000 { + compatible = "mobileye,eyeq5-i2c", "arm,primecell"; + reg = <0x300000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&i2c_ser_clk>, <&i2c_clk>; + clock-names = "i2cclk", "apb_pclk"; + mobileye,olb = <&olb 0>; + }; ... diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml index 1b31b87c1800..8fd8be76875e 100644 --- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml @@ -127,6 +127,10 @@ properties: wakeup-source: true + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/adc/adc.yaml b/Documentation/devicetree/bindings/iio/adc/adc.yaml index 261601729745..36775f8f71df 100644 --- a/Documentation/devicetree/bindings/iio/adc/adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adc.yaml @@ -22,7 +22,6 @@ properties: maxItems: 1 label: - $ref: /schemas/types.yaml#/definitions/string description: Unique name to identify which channel this is. bipolar: diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml index 7aa748d6b7a0..eecd5fbab695 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml @@ -44,6 +44,9 @@ properties: Pin that controls the powerdown mode of the device. maxItems: 1 + io-backends: + maxItems: 1 + reset-gpios: description: Reset pin for the device. @@ -68,6 +71,7 @@ examples: reg = <0>; clocks = <&adc_clk>; clock-names = "adc-clk"; + io-backends = <&iio_backend>; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml index 9996dd93f84b..3d49d21ad33d 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml @@ -39,12 +39,15 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: A reference to a the actual ADC to which this FPGA ADC interfaces to. + deprecated: true + + '#io-backend-cells': + const: 0 required: - compatible - dmas - reg - - adi,adc-dev additionalProperties: false @@ -55,7 +58,6 @@ examples: reg = <0x44a00000 0x10000>; dmas = <&rx_dma 0>; dma-names = "rx"; - - adi,adc-dev = <&spi_adc>; + #io-backend-cells = <0>; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml new file mode 100644 index 000000000000..47a11a9ac95e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/microchip,pac1934.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PAC1934 Power Monitors with Accumulator + +maintainers: + - Marius Cristea <marius.cristea@microchip.com> + +description: | + This device is part of the Microchip family of Power Monitors with + Accumulator. + The datasheet for PAC1931, PAC1932, PAC1933 and PAC1934 can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/PAC1931-Family-Data-Sheet-DS20005850E.pdf + +properties: + compatible: + enum: + - microchip,pac1931 + - microchip,pac1932 + - microchip,pac1933 + - microchip,pac1934 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + interrupts: + maxItems: 1 + + slow-io-gpios: + description: + A GPIO used to trigger a change is sampling rate (lowering the chip power + consumption). If configured in SLOW mode, if this pin is forced high, + sampling rate is forced to eight samples/second. When it is forced low, + the sampling rate is 1024 samples/second unless a different sample rate + has been programmed. + +patternProperties: + "^channel@[1-4]+$": + type: object + $ref: adc.yaml + description: + Represents the external channels which are connected to the ADC. + + properties: + reg: + items: + minimum: 1 + maximum: 4 + + shunt-resistor-micro-ohms: + description: + Value in micro Ohms of the shunt resistor connected between + the SENSE+ and SENSE- inputs, across which the current is measured. + Value is needed to compute the scaling of the measured current. + + required: + - reg + - shunt-resistor-micro-ohms + + unevaluatedProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + power-monitor@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <24900000>; + label = "CPU"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <49900000>; + label = "GPU"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <75000000>; + label = "MEM"; + bipolar; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <100000000>; + label = "NET"; + bipolar; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml index dacc526dc695..dfc3f512918f 100644 --- a/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml @@ -31,7 +31,6 @@ properties: - description: normal conversion, include EOC (End of Conversion), ECH (End of Chain), JEOC (End of Injected Conversion) and JECH (End of injected Chain). - - description: Self-testing Interrupts. clocks: maxItems: 1 @@ -70,8 +69,7 @@ examples: reg = <0x44530000 0x10000>; interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_ADC1_GATE>; clock-names = "ipg"; vref-supply = <®_vref_1v8>; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml index 40fa0710f1f0..c28db0d635a0 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -75,7 +75,6 @@ patternProperties: in the PMIC-specific files in include/dt-bindings/iio/. label: - $ref: /schemas/types.yaml#/definitions/string description: | ADC input of the platform as seen in the schematics. For thermistor inputs connected to generic AMUX or GPIO inputs diff --git a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml index 88e008629ea8..af2c3a67f888 100644 --- a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml +++ b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml @@ -25,7 +25,14 @@ description: | properties: compatible: - const: richtek,rtq6056 + oneOf: + - enum: + - richtek,rtq6056 + - richtek,rtq6059 + - items: + - enum: + - richtek,rtq6053 + - const: richtek,rtq6056 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml index 995cbf8cefc6..ec34c48d4878 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -93,6 +93,10 @@ properties: '#size-cells': const: 0 + access-controllers: + minItems: 1 + maxItems: 2 + allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 1970503389aa..c1b1324fa132 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -59,6 +59,10 @@ properties: If not, SPI CLKOUT frequency will not be accurate. maximum: 20000000 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml new file mode 100644 index 000000000000..bf5a43a81d59 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,ads1298.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments' ads1298 medical ADC chips + +description: | + Datasheet at: https://www.ti.com/product/ADS1298 + Bindings for this chip aren't complete. + +maintainers: + - Mike Looijmans <mike.looijmans@topic.nl> + +properties: + compatible: + enum: + - ti,ads1298 + + reg: + maxItems: 1 + + spi-cpha: true + + reset-gpios: + maxItems: 1 + + avdd-supply: + description: + Analog power supply, voltage between AVDD and AVSS. When providing a + symmetric +/- 2.5V, the regulator should report 5V. + + vref-supply: + description: + Optional reference voltage. If omitted, internal reference is used, + which is 2.4V when analog supply is below 4.4V, 4V otherwise. + + clocks: + description: Optional 2.048 MHz external source clock on CLK pin + maxItems: 1 + + interrupts: + description: Interrupt on DRDY pin, triggers on falling edge + maxItems: 1 + + label: true + +required: + - compatible + - reg + - avdd-supply + - interrupts + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@1 { + reg = <1>; + compatible = "ti,ads1298"; + label = "ads1298-1-ecg"; + avdd-supply = <®_iso_5v_a>; + clocks = <&clk_ads1298>; + interrupt-parent = <&gpio0>; + interrupts = <78 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <20000000>; + spi-cpha; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml index dddf97b50549..4151f99b42aa 100644 --- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml +++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml @@ -39,6 +39,17 @@ properties: description: | Channel node of a voltage io-channel. + '#io-channel-cells': + description: + In addition to consuming the measurement services of a voltage + output channel, the voltage divider can act as a provider of + measurement services to other devices. This is particularly + useful in scenarios wherein an ADC has an analog frontend, + such as a voltage divider, and then consuming its raw value + isn't interesting. In this case, the voltage before the divider + is desired. + const: 1 + output-ohms: description: Resistance Rout over which the output voltage is measured. See full-ohms. diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml index 67de9d4e3a1d..3a470459b965 100644 --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml @@ -21,6 +21,8 @@ description: | HMC540S 1 dB LSB Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz https://www.analog.com/media/en/technical-documentation/data-sheets/hmc540s.pdf + LTC6373 is a 3-Bit precision instrumentation amplifier with fully differential outputs + https://www.analog.com/media/en/technical-documentation/data-sheets/ltc6373.pdf properties: compatible: @@ -28,16 +30,55 @@ properties: - adi,adrf5740 - adi,hmc425a - adi,hmc540s + - adi,ltc6373 vcc-supply: true ctrl-gpios: description: - Must contain an array of 6 GPIO specifiers, referring to the GPIO pins - connected to the control pins V1-V6. - minItems: 6 + Must contain an array of GPIO specifiers, referring to the GPIO pins + connected to the control pins. + ADRF5740 - 4 GPIO connected to D2-D5 + HMC540S - 4 GPIO connected to V1-V4 + HMC425A - 6 GPIO connected to V1-V6 + LTC6373 - 3 GPIO connected to A0-A2 + minItems: 1 maxItems: 6 +allOf: + - if: + properties: + compatible: + contains: + const: adi,hmc425a + then: + properties: + ctrl-gpios: + minItems: 6 + maxItems: 6 + - if: + properties: + compatible: + contains: + anyOf: + - const: adi,adrf5740 + - const: adi,hmc540s + then: + properties: + ctrl-gpios: + minItems: 4 + maxItems: 4 + - if: + properties: + compatible: + contains: + const: adi,ltc6373 + then: + properties: + ctrl-gpios: + minItems: 3 + maxItems: 3 + required: - compatible - ctrl-gpios diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml index 04045b932bd2..b15de4eb209c 100644 --- a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml +++ b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml @@ -45,6 +45,10 @@ properties: '#size-cells': const: 0 + access-controllers: + minItems: 1 + maxItems: 2 + additionalProperties: false required: diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml new file mode 100644 index 000000000000..2bcf4bbc12e4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2024 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/frequency/adi,admfm2000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADMFM2000 Dual Microwave Down Converter + +maintainers: + - Kim Seer Paller <kimseer.paller@analog.com> + +description: + Dual microwave down converter module with input RF and LO frequency ranges + from 0.5 to 32 GHz and an output IF frequency range from 0.1 to 8 GHz. + It consists of a LNA, mixer, IF filter, DSA, and IF amplifier for each down + conversion path. + +properties: + compatible: + enum: + - adi,admfm2000 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^channel@[0-1]$": + type: object + description: Represents a channel of the device. + + additionalProperties: false + + properties: + reg: + description: + The channel number. + minimum: 0 + maximum: 1 + + adi,mixer-mode: + description: + Enable mixer mode for the channel. It downconverts RF between 5 GHz + and 32 GHz to IF between 0.5 GHz and 8 GHz. If not present, the channel + is in direct IF mode which bypasses the mixer and downconverts RF + between 2 GHz and 8 GHz to IF between 0.5 GHz and 8 GHz. + type: boolean + + switch-gpios: + description: | + GPIOs to select the RF path for the channel. The same state of CTRL-A + and CTRL-B GPIOs is not permitted. + CTRL-A CTRL-B CH1 Status CH2 Status + 1 0 Direct IF mode Mixer mode + 0 1 Mixer mode Direct IF mode + + items: + - description: CTRL-A GPIO + - description: CTRL-B GPIO + + attenuation-gpios: + description: | + Choice of attenuation: + DSA-V4 DSA-V3 DSA-V2 DSA-V1 DSA-V0 + 1 1 1 1 1 0 dB + 1 1 1 1 0 -1 dB + 1 1 1 0 1 -2 dB + 1 1 0 1 1 -4 dB + 1 0 1 1 1 -8 dB + 0 1 1 1 1 -16 dB + 0 0 0 0 0 -31 dB + + items: + - description: DSA-V0 GPIO + - description: DSA-V1 GPIO + - description: DSA-V2 GPIO + - description: DSA-V3 GPIO + - description: DSA-V4 GPIO + + required: + - reg + - switch-gpios + - attenuation-gpios + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + converter { + compatible = "adi,admfm2000"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + switch-gpios = <&gpio 1 GPIO_ACTIVE_LOW>, + <&gpio 2 GPIO_ACTIVE_HIGH>; + + attenuation-gpios = <&gpio 17 GPIO_ACTIVE_LOW>, + <&gpio 22 GPIO_ACTIVE_LOW>, + <&gpio 23 GPIO_ACTIVE_LOW>, + <&gpio 24 GPIO_ACTIVE_LOW>, + <&gpio 25 GPIO_ACTIVE_LOW>; + }; + + channel@1 { + reg = <1>; + adi,mixer-mode; + switch-gpios = <&gpio 3 GPIO_ACTIVE_LOW>, + <&gpio 4 GPIO_ACTIVE_HIGH>; + + attenuation-gpios = <&gpio 0 GPIO_ACTIVE_LOW>, + <&gpio 5 GPIO_ACTIVE_LOW>, + <&gpio 6 GPIO_ACTIVE_LOW>, + <&gpio 16 GPIO_ACTIVE_LOW>, + <&gpio 26 GPIO_ACTIVE_LOW>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml index 1414ba9977c1..3c6fe74af0b8 100644 --- a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml +++ b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml @@ -22,6 +22,9 @@ properties: vdd-supply: true vddio-supply: true + spi-max-frequency: + maximum: 10000000 + interrupts: minItems: 1 maxItems: 2 @@ -33,7 +36,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml index c13c10c8d65d..eed0df9d3a23 100644 --- a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml +++ b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml @@ -42,7 +42,7 @@ allOf: properties: compatible: contains: - const: maxim,max30100 + const: maxim,max30102 then: properties: maxim,green-led-current-microamp: false diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml index 79e75a8675cb..e3eca8917517 100644 --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml @@ -27,6 +27,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml index 7f6d0f9edc75..8b5dedd1a598 100644 --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml @@ -43,6 +43,7 @@ additionalProperties: false examples: - | + #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; #size-cells = <0>; @@ -51,5 +52,7 @@ examples: compatible = "ti,hdc3021", "ti,hdc3020"; reg = <0x47>; vdd-supply = <&vcc_3v3>; + interrupt-parent = <&gpio3>; + interrupts = <23 IRQ_TYPE_EDGE_RISING>; }; }; diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml index 28b667a9cb76..c48a96d17f51 100644 --- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml +++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml @@ -35,7 +35,9 @@ properties: - st,lsm6dsv - st,lsm6dso16is - items: - - const: st,asm330lhhx + - enum: + - st,asm330lhhx + - st,asm330lhhxg1 - const: st,lsm6dsr - items: - const: st,lsm6dstx diff --git a/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml b/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml index 0e8cd02759b3..062a038aa0ff 100644 --- a/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml +++ b/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml @@ -4,19 +4,22 @@ $id: http://devicetree.org/schemas/iio/light/ams,as73211.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor +title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor and AMS AS7331 UV Sensor maintainers: - Christian Eggers <ceggers@arri.de> description: | - XYZ True Color Sensor with I2C Interface + AMS AS73211 XYZ True Color Sensor with I2C Interface https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df + AMS AS7331 UVA, UVB and UVC Sensor with I2C Interface + https://ams.com/documents/20143/9106314/AS7331_DS001047_4-00.pdf properties: compatible: enum: - ams,as73211 + - ams,as7331 reg: description: diff --git a/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml b/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml index abee04cd126e..91c318746bf3 100644 --- a/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml +++ b/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml @@ -21,6 +21,7 @@ properties: required: - compatible - reg + - vdd-supply additionalProperties: false diff --git a/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml b/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml new file mode 100644 index 000000000000..b6ab01a6914a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/magnetometer/voltafield,af8133j.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Voltafield AF8133J magnetometer sensor + +maintainers: + - Ondřej Jirman <megi@xff.cz> + +properties: + compatible: + const: voltafield,af8133j + + reg: + maxItems: 1 + + reset-gpios: + description: + A signal for active low reset input of the sensor. (optional; if not + used, software reset over I2C will be used instead) + + avdd-supply: + description: + A regulator that provides AVDD power (Working power, usually 3.3V) to + the sensor. + + dvdd-supply: + description: + A regulator that provides DVDD power (Digital IO power, 1.8V - AVDD) + to the sensor. + + mount-matrix: + description: An optional 3x3 mounting rotation matrix. + +required: + - compatible + - reg + - avdd-supply + - dvdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@1c { + compatible = "voltafield,af8133j"; + reg = <0x1c>; + avdd-supply = <®_dldo1>; + dvdd-supply = <®_dldo1>; + reset-gpios = <&pio 1 1 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml index 65a24ed67b3c..89977b9f01cf 100644 --- a/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml @@ -99,6 +99,9 @@ required: - honeywell,transfer-function - honeywell,pressure-triplet +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + additionalProperties: false dependentSchemas: diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml index d9e903fbfd99..6994b30015bd 100644 --- a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml @@ -8,25 +8,28 @@ title: Honeywell mprls0025pa pressure sensor maintainers: - Andreas Klinger <ak@it-klinger.de> + - Petre Rodan <petre.rodan@subdimension.ro> description: | Honeywell pressure sensor of model mprls0025pa. - This sensor has an I2C and SPI interface. Only the I2C interface is - implemented. + This sensor has an I2C and SPI interface. There are many models with different pressure ranges available. The vendor calls them "mpr series". All of them have the identical programming model and differ in the pressure range, unit and transfer function. - To support different models one need to specify the pressure range as well as - the transfer function. Pressure range needs to be converted from its unit to - pascal. + To support different models one need to specify its pressure triplet as well + as the transfer function. + + For custom silicon chips not covered by the Honeywell MPR series datasheet, + the pressure values can be specified manually via honeywell,pmin-pascal and + honeywell,pmax-pascal. + The minimal range value stands for the minimum pressure and the maximum value + also for the maximum pressure with linear relation inside the range. The transfer function defines the ranges of numerical values delivered by the - sensor. The minimal range value stands for the minimum pressure and the - maximum value also for the maximum pressure with linear relation inside the - range. + sensor. Specifications about the devices can be found at: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/ @@ -42,6 +45,10 @@ properties: maxItems: 1 interrupts: + description: + Optional interrupt for indicating End-of-conversion. + If not present, the driver loops for a while until the received status + byte indicates correct measurement. maxItems: 1 reset-gpios: @@ -50,14 +57,6 @@ properties: If not present the device is not reset during the probe. maxItems: 1 - honeywell,pmin-pascal: - description: - Minimum pressure value the sensor can measure in pascal. - - honeywell,pmax-pascal: - description: - Maximum pressure value the sensor can measure in pascal. - honeywell,transfer-function: description: | Transfer function which defines the range of valid values delivered by the @@ -65,19 +64,57 @@ properties: 1 - A, 10% to 90% of 2^24 (1677722 .. 15099494) 2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874) 3 - C, 20% to 80% of 2^24 (3355443 .. 13421773) + enum: [1, 2, 3] $ref: /schemas/types.yaml#/definitions/uint32 + honeywell,pressure-triplet: + description: | + Case-sensitive five character string that defines pressure range, unit + and type as part of the device nomenclature. In the unlikely case of a + custom chip, unset and provide pmin-pascal and pmax-pascal instead. + enum: [0001BA, 01.6BA, 02.5BA, 0060MG, 0100MG, 0160MG, 0250MG, 0400MG, + 0600MG, 0001BG, 01.6BG, 02.5BG, 0100KA, 0160KA, 0250KA, 0006KG, + 0010KG, 0016KG, 0025KG, 0040KG, 0060KG, 0100KG, 0160KG, 0250KG, + 0015PA, 0025PA, 0030PA, 0001PG, 0005PG, 0015PG, 0030PG, 0300YG] + $ref: /schemas/types.yaml#/definitions/string + + honeywell,pmin-pascal: + description: + Minimum pressure value the sensor can measure in pascal. + + honeywell,pmax-pascal: + description: + Maximum pressure value the sensor can measure in pascal. + + spi-max-frequency: + maximum: 800000 + vdd-supply: description: provide VDD power to the sensor. required: - compatible - reg - - honeywell,pmin-pascal - - honeywell,pmax-pascal - honeywell,transfer-function - vdd-supply +oneOf: + - required: + - honeywell,pressure-triplet + - required: + - honeywell,pmin-pascal + - honeywell,pmax-pascal + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + - if: + required: + - honeywell,pressure-triplet + then: + properties: + honeywell,pmin-pascal: false + honeywell,pmax-pascal: false + additionalProperties: false examples: @@ -93,10 +130,29 @@ examples: reg = <0x18>; reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; interrupt-parent = <&gpio3>; - interrupts = <21 IRQ_TYPE_EDGE_FALLING>; - honeywell,pmin-pascal = <0>; - honeywell,pmax-pascal = <172369>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + + honeywell,pressure-triplet = "0025PA"; + honeywell,transfer-function = <1>; + vdd-supply = <&vcc_3v3>; + }; + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + pressure@0 { + compatible = "honeywell,mprls0025pa"; + reg = <0>; + spi-max-frequency = <800000>; + reset-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio0>; + interrupts = <30 IRQ_TYPE_EDGE_RISING>; + + honeywell,pressure-triplet = "0015PA"; honeywell,transfer-function = <1>; vdd-supply = <&vcc_3v3>; }; }; +... diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml index 8c6d7735e875..58aa1542776b 100644 --- a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml @@ -24,9 +24,16 @@ properties: reg: maxItems: 1 + vcc-supply: + description: provide VCC power to the sensor. + + label: + description: Unique name to identify which device this is. + required: - compatible - reg + - vcc-supply additionalProperties: false @@ -39,5 +46,6 @@ examples: tmp117@48 { compatible = "ti,tmp117"; reg = <0x48>; + vcc-supply = <&pmic_reg_3v3>; }; }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml index 08c1c6b9d7cf..5aaa92a7cef7 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml @@ -23,6 +23,9 @@ properties: compatible: enum: + - qcom,msm8909-bimc + - qcom,msm8909-pcnoc + - qcom,msm8909-snoc - qcom,msm8916-bimc - qcom,msm8916-pcnoc - qcom,msm8916-snoc diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml index 74ab080249ff..9318b845ec35 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml @@ -8,7 +8,7 @@ title: Qualcomm RPMh Network-On-Chip Interconnect maintainers: - Georgi Djakov <georgi.djakov@linaro.org> - - Odelu Kukatla <okukatla@codeaurora.org> + - Odelu Kukatla <quic_okukatla@quicinc.com> description: | RPMh interconnect providers support system bandwidth requirements through diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm7150-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm7150-rpmh.yaml new file mode 100644 index 000000000000..b565d1a382f6 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,sm7150-rpmh.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,sm7150-rpmh.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMh Network-On-Chip Interconnect on SM7150 + +maintainers: + - Danila Tikhonov <danila@jiaxyga.com> + +description: | + RPMh interconnect providers support system bandwidth requirements through + RPMh hardware accelerators known as Bus Clock Manager (BCM). + + See also:: include/dt-bindings/interconnect/qcom,sm7150-rpmh.h + +allOf: + - $ref: qcom,rpmh-common.yaml# + +properties: + compatible: + enum: + - qcom,sm7150-aggre1-noc + - qcom,sm7150-aggre2-noc + - qcom,sm7150-compute-noc + - qcom,sm7150-config-noc + - qcom,sm7150-dc-noc + - qcom,sm7150-gem-noc + - qcom,sm7150-mc-virt + - qcom,sm7150-mmss-noc + - qcom,sm7150-system-noc + + reg: + maxItems: 1 + +# Child node's properties +patternProperties: + '^interconnect-[0-9]+$': + type: object + description: + The interconnect providers do not have a separate QoS register space, + but share parent's space. + + allOf: + - $ref: qcom,rpmh-common.yaml# + + properties: + compatible: + enum: + - qcom,sm7150-camnoc-virt + + required: + - compatible + + unevaluatedProperties: false + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + mc_virt: interconnect@1380000 { + compatible = "qcom,sm7150-mc-virt"; + reg = <0x01380000 0x40000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sm7150-system-noc"; + reg = <0x01620000 0x40000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + + camnoc_virt: interconnect-0 { + compatible = "qcom,sm7150-camnoc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml index 2314a9a14650..1d930d9e10fd 100644 --- a/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml +++ b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml @@ -29,6 +29,10 @@ properties: - const: cec - const: hdmi-cec + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml index 6b3e413cedb2..34147127192f 100644 --- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml +++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml @@ -36,6 +36,10 @@ properties: resets: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + port: $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml b/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml index b8611bc8756c..73726c65cfb9 100644 --- a/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml +++ b/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml @@ -30,6 +30,10 @@ properties: clocks: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,s5pv210-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,s5pv210-dmc.yaml new file mode 100644 index 000000000000..c0e47055f28c --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/samsung,s5pv210-dmc.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/samsung,s5pv210-dmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5Pv210 SoC Dynamic Memory Controller + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: + Dynamic Memory Controller interfaces external JEDEC DDR-type SDRAM. + +properties: + compatible: + const: samsung,s5pv210-dmc + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + memory-controller@f0000000 { + compatible = "samsung,s5pv210-dmc"; + reg = <0xf0000000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml index 84ac6f50a6fc..706e45eb4d27 100644 --- a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml @@ -50,6 +50,10 @@ properties: Reflects the memory layout with four integer values per bank. Format: <bank-number> 0 <address of the bank> <size> + access-controllers: + minItems: 1 + maxItems: 2 + patternProperties: "^.*@[0-4],[a-f0-9]+$": additionalProperties: true diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml index 27329c5dc38e..d41308856408 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml @@ -44,6 +44,10 @@ properties: wakeup-source: true + access-controllers: + minItems: 1 + maxItems: 2 + pwm: type: object additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml index f84e09a5743b..b0e438ff4950 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml @@ -67,6 +67,10 @@ properties: "#size-cells": const: 0 + access-controllers: + minItems: 1 + maxItems: 2 + pwm: type: object additionalProperties: false diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml index 940b12688167..8f62e2c7fa64 100644 --- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml +++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml @@ -79,6 +79,10 @@ properties: - const: rx - const: tx + access-controllers: + minItems: 1 + maxItems: 2 + power-domains: true resets: diff --git a/Documentation/devicetree/bindings/mtd/partitions/linux,ubi.yaml b/Documentation/devicetree/bindings/mtd/partitions/linux,ubi.yaml new file mode 100644 index 000000000000..27e1ac1f252e --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/partitions/linux,ubi.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/linux,ubi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unsorted Block Images + +description: | + UBI ("Unsorted Block Images") is a volume management system for raw + flash devices which manages multiple logical volumes on a single + physical flash device and spreads the I/O load (i.e wear-leveling) + across the whole flash chip. + +maintainers: + - Daniel Golle <daniel@makrotopia.org> + +allOf: + - $ref: partition.yaml# + +properties: + compatible: + const: linux,ubi + + volumes: + type: object + description: UBI Volumes + + patternProperties: + "^ubi-volume-.*$": + $ref: /schemas/mtd/partitions/ubi-volume.yaml# + + unevaluatedProperties: false + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x100000>; + label = "bootloader"; + read-only; + }; + + partition@100000 { + reg = <0x100000 0x1ff00000>; + label = "ubi"; + compatible = "linux,ubi"; + + volumes { + ubi-volume-caldata { + volid = <2>; + volname = "rf"; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom@0 { + reg = <0x0 0x1000>; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml b/Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml new file mode 100644 index 000000000000..19736b26056b --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/ubi-volume.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UBI volume + +description: | + This binding describes a single UBI volume. Volumes can be matches either + by their ID or their name, or both. + +maintainers: + - Daniel Golle <daniel@makrotopia.org> + +properties: + volid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Match UBI volume ID + + volname: + $ref: /schemas/types.yaml#/definitions/string + description: + Match UBI volume ID + + nvmem-layout: + $ref: /schemas/nvmem/layouts/nvmem-layout.yaml# + description: + This container may reference an NVMEM layout parser. + +anyOf: + - required: + - volid + + - required: + - volname + +# This is a generic file other binding inherit from and extend +additionalProperties: true diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml index 528ef3572b62..055a3351880b 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml @@ -94,6 +94,10 @@ properties: local-bd-address: true + qcom,local-bd-address-broken: + type: boolean + description: + boot firmware is incorrectly passing the address in big-endian order required: - compatible diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index f9ffb963d6b1..c4887522e8fe 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -118,6 +118,10 @@ properties: phys: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml index e74502a0afe8..3202dc7967c5 100644 --- a/Documentation/devicetree/bindings/net/mediatek,net.yaml +++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml @@ -337,8 +337,8 @@ allOf: minItems: 4 clocks: - minItems: 34 - maxItems: 34 + minItems: 24 + maxItems: 24 clock-names: items: @@ -351,18 +351,6 @@ allOf: - const: ethwarp_wocpu1 - const: ethwarp_wocpu0 - const: esw - - const: netsys0 - - const: netsys1 - - const: sgmii_tx250m - - const: sgmii_rx250m - - const: sgmii2_tx250m - - const: sgmii2_rx250m - - const: top_usxgmii0_sel - - const: top_usxgmii1_sel - - const: top_sgm0_sel - - const: top_sgm1_sel - - const: top_xfi_phy0_xtal_sel - - const: top_xfi_phy1_xtal_sel - const: top_eth_gmii_sel - const: top_eth_refck_50m_sel - const: top_eth_sys_200m_sel @@ -375,16 +363,10 @@ allOf: - const: top_netsys_sync_250m_sel - const: top_netsys_ppefb_250m_sel - const: top_netsys_warp_sel - - const: wocpu1 - - const: wocpu0 - const: xgp1 - const: xgp2 - const: xgp3 - mediatek,sgmiisys: - minItems: 2 - maxItems: 2 - patternProperties: "^mac@[0-1]$": type: object diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index fc8c96b08d7d..f2714b5b6cf4 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -93,6 +93,10 @@ properties: select RCC clock instead of ETH_REF_CLK. type: boolean + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - clocks diff --git a/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml index ac2381e66027..8b3826243ddd 100644 --- a/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml +++ b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml @@ -36,20 +36,18 @@ properties: allOf: - if: + properties: + compatible: + contains: + const: mac-base required: [ compatible ] then: - if: - properties: - compatible: - contains: - const: mac-base - then: - properties: - "#nvmem-cell-cells": - description: The first argument is a MAC address offset. - const: 1 - required: - - "#nvmem-cell-cells" + properties: + "#nvmem-cell-cells": + description: The first argument is a MAC address offset. + const: 1 + required: + - "#nvmem-cell-cells" required: - reg diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-provider.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-provider.yaml new file mode 100644 index 000000000000..4009a9a03841 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/nvmem-provider.yaml @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/nvmem-provider.yaml# +$schema: http://devicetree.org/meta-schemas/base.yaml# + +title: NVMEM (Non Volatile Memory) Provider + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +select: true + +properties: + '#nvmem-cell-cells': + enum: [0, 1] + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt deleted file mode 100644 index 4881561b3a02..000000000000 --- a/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt +++ /dev/null @@ -1,46 +0,0 @@ --------------------------------------------------------------------------- -= Zynq UltraScale+ MPSoC nvmem firmware driver binding = --------------------------------------------------------------------------- -The nvmem_firmware node provides access to the hardware related data -like soc revision, IDCODE... etc, By using the firmware interface. - -Required properties: -- compatible: should be "xlnx,zynqmp-nvmem-fw" - -= Data cells = -Are child nodes of silicon id, bindings of which as described in -bindings/nvmem/nvmem.txt - -------- - Example -------- -firmware { - zynqmp_firmware: zynqmp-firmware { - compatible = "xlnx,zynqmp-firmware"; - method = "smc"; - - nvmem_firmware { - compatible = "xlnx,zynqmp-nvmem-fw"; - #address-cells = <1>; - #size-cells = <1>; - - /* Data cells */ - soc_revision: soc_revision { - reg = <0x0 0x4>; - }; - }; - }; -}; - -= Data consumers = -Are device nodes which consume nvmem data cells. - -For example: - pcap { - ... - - nvmem-cells = <&soc_revision>; - nvmem-cell-names = "soc_revision"; - - ... - }; diff --git a/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml new file mode 100644 index 000000000000..917c40d5c382 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/xlnx,zynqmp-nvmem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Zynq UltraScale+ MPSoC Non Volatile Memory interface + +description: | + The ZynqMP MPSoC provides access to the hardware related data + like SOC revision, IDCODE and specific purpose efuses. + +maintainers: + - Kalyani Akula <kalyani.akula@amd.com> + - Praveen Teja Kundanala <praveen.teja.kundanala@amd.com> + +allOf: + - $ref: nvmem.yaml# + +properties: + compatible: + const: xlnx,zynqmp-nvmem-fw + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + nvmem { + compatible = "xlnx,zynqmp-nvmem-fw"; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + soc_revision: soc-revision@0 { + reg = <0x0 0x4>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml index 24a3dbde223b..ceea122ae1a6 100644 --- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml +++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml @@ -55,6 +55,10 @@ properties: description: number of clock cells for ck_usbo_48m consumer const: 0 + access-controllers: + minItems: 1 + maxItems: 2 + # Required child nodes: patternProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index d476de82e5c3..4d5a957fa232 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -120,7 +120,9 @@ additionalProperties: slew-rate: true gpio-hog: true gpios: true + input: true input-enable: true + output-enable: true output-high: true output-low: true line-name: true diff --git a/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml index afcdeed4e88a..bc813fe74fab 100644 --- a/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml +++ b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml @@ -52,6 +52,9 @@ properties: - const: main - const: mm + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pwm/opencores,pwm.yaml b/Documentation/devicetree/bindings/pwm/opencores,pwm.yaml new file mode 100644 index 000000000000..52a59d245cdb --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/opencores,pwm.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/opencores,pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OpenCores PWM controller + +maintainers: + - William Qiu <william.qiu@starfivetech.com> + +description: + The OpenCores PTC ip core contains a PWM controller. When operating in PWM + mode, the PTC core generates binary signal with user-programmable low and + high periods. All PTC counters and registers are 32-bit. + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + items: + - enum: + - starfive,jh7100-pwm + - starfive,jh7110-pwm + - starfive,jh8100-pwm + - const: opencores,pwm-v1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + "#pwm-cells": + const: 3 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + pwm@12490000 { + compatible = "starfive,jh7110-pwm", "opencores,pwm-v1"; + reg = <0x12490000 0x10000>; + clocks = <&clkgen 181>; + resets = <&rstgen 109>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml index 8afb40c67af3..33ae1f786802 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml @@ -26,6 +26,7 @@ properties: - enum: - qcom,pm4125-vbus-reg - qcom,pm6150-vbus-reg + - qcom,pmi632-vbus-reg - const: qcom,pm8150b-vbus-reg reg: diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml index 05f4ad2c7d3a..6ceaffb45dc9 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml @@ -30,6 +30,10 @@ properties: vdda-supply: description: phandle to the vdda input analog voltage. + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml index 09102dda4942..507f98f73d23 100644 --- a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml +++ b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml @@ -47,7 +47,7 @@ properties: maxItems: 1 firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: If present, name (or relative path) of the file within the firmware search path containing the firmware image used when @@ -115,7 +115,7 @@ patternProperties: maxItems: 1 firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: If present, name (or relative path) of the file within the firmware search path containing the firmware image used when diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml index 884158bccd50..3766d4513b37 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml @@ -18,7 +18,6 @@ properties: const: qcom,glink-rpm label: - $ref: /schemas/types.yaml#/definitions/string description: Name of the edge, used for debugging and identification purposes. The node name will be used if this is not present. diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml index eb868a7ff4cd..ad45fd00ae34 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml @@ -46,7 +46,7 @@ properties: description: Reference to the reserved-memory for the Hexagon core firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml index c054b84fdcd5..66b455d0a8e3 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml @@ -45,7 +45,7 @@ properties: smd-edge: false firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml index b6bd33438584..9381c7022ff4 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml @@ -80,7 +80,7 @@ properties: description: Reference to the reserved-memory for the Hexagon core firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: The name of the firmware which should be loaded for this remote processor. diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml index 4744a37b2b5d..45ee9fbe0966 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml @@ -42,7 +42,7 @@ properties: description: Reference to the reserved-memory for the Hexagon core firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml index 028287235912..758adb06c8dd 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml @@ -47,7 +47,7 @@ properties: smd-edge: false firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml index f7e40fb166da..c1a3cc308bdb 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml @@ -42,7 +42,7 @@ properties: smd-edge: false firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml index 3e4a03eb4532..7286b2baa19f 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml @@ -36,7 +36,7 @@ properties: description: Reference to the reserved-memory for the Hexagon core firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core smd-edge: false diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml index 238c6e5e67c5..d67386c50fa4 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml @@ -46,7 +46,7 @@ properties: smd-edge: false firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml index 53cea8e53a31..4b9fb74fb9e9 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml @@ -47,7 +47,7 @@ properties: description: Reference to the reserved-memory for the Hexagon core firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml index 58120829fb06..73fda7565cd1 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml @@ -19,6 +19,11 @@ properties: - qcom,sm8550-adsp-pas - qcom,sm8550-cdsp-pas - qcom,sm8550-mpss-pas + - qcom,sm8650-adsp-pas + - qcom,sm8650-cdsp-pas + - qcom,sm8650-mpss-pas + - qcom,x1e80100-adsp-pas + - qcom,x1e80100-cdsp-pas reg: maxItems: 1 @@ -49,6 +54,8 @@ properties: - description: Memory region for main Firmware authentication - description: Memory region for Devicetree Firmware authentication - description: DSM Memory region + - description: DSM Memory region 2 + - description: Memory region for Qlink Logging required: - compatible @@ -63,6 +70,9 @@ allOf: enum: - qcom,sm8550-adsp-pas - qcom,sm8550-cdsp-pas + - qcom,sm8650-adsp-pas + - qcom,x1e80100-adsp-pas + - qcom,x1e80100-cdsp-pas then: properties: interrupts: @@ -71,7 +81,26 @@ allOf: maxItems: 5 memory-region: maxItems: 2 - else: + - if: + properties: + compatible: + enum: + - qcom,sm8650-cdsp-pas + then: + properties: + interrupts: + maxItems: 5 + interrupt-names: + maxItems: 5 + memory-region: + minItems: 3 + maxItems: 3 + - if: + properties: + compatible: + enum: + - qcom,sm8550-mpss-pas + then: properties: interrupts: minItems: 6 @@ -79,12 +108,29 @@ allOf: minItems: 6 memory-region: minItems: 3 + maxItems: 3 + - if: + properties: + compatible: + enum: + - qcom,sm8650-mpss-pas + then: + properties: + interrupts: + minItems: 6 + interrupt-names: + minItems: 6 + memory-region: + minItems: 5 + maxItems: 5 - if: properties: compatible: enum: - qcom,sm8550-adsp-pas + - qcom,sm8650-adsp-pas + - qcom,x1e80100-adsp-pas then: properties: power-domains: @@ -101,6 +147,7 @@ allOf: compatible: enum: - qcom,sm8550-mpss-pas + - qcom,sm8650-mpss-pas then: properties: power-domains: @@ -116,6 +163,8 @@ allOf: compatible: enum: - qcom,sm8550-cdsp-pas + - qcom,sm8650-cdsp-pas + - qcom,x1e80100-cdsp-pas then: properties: power-domains: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml index 45eb42bd3c2c..8e033b22d28c 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml @@ -51,7 +51,7 @@ properties: - const: stop-ack firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Relative firmware image path for the WCNSS core. Defaults to "wcnss.mdt". diff --git a/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt index 25f8658e216f..48a49c516b62 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt +++ b/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt @@ -1,9 +1,6 @@ TI Davinci DSP devices ======================= -Binding status: Unstable - Subject to changes for DT representation of clocks - and resets - The TI Davinci family of SoCs usually contains a TI DSP Core sub-system that is used to offload some of the processor-intensive tasks or algorithms, for achieving various system level goals. diff --git a/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml b/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml new file mode 100644 index 000000000000..76e1931f0908 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/sophgo,sg2042-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sophgo SG2042 SoC Reset Controller + +maintainers: + - Chen Wang <unicorn_wang@outlook.com> + +properties: + compatible: + const: sophgo,sg2042-reset + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + rstgen: reset-controller@c00 { + compatible = "sophgo,sg2042-reset"; + reg = <0xc00 0xc>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 9d8670c00e3b..d87dd50f1a4b 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -75,6 +75,10 @@ properties: - riscv,sv57 - riscv,none + reg: + description: + The hart ID of this CPU node. + riscv,cbom-block-size: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -106,7 +110,11 @@ properties: const: 1 compatible: - const: riscv,cpu-intc + oneOf: + - items: + - const: andestech,cpu-intc + - const: riscv,cpu-intc + - const: riscv,cpu-intc interrupt-controller: true diff --git a/Documentation/devicetree/bindings/riscv/extensions.yaml b/Documentation/devicetree/bindings/riscv/extensions.yaml index 63d81dc895e5..468c646247aa 100644 --- a/Documentation/devicetree/bindings/riscv/extensions.yaml +++ b/Documentation/devicetree/bindings/riscv/extensions.yaml @@ -477,5 +477,12 @@ properties: latency, as ratified in commit 56ed795 ("Update riscv-crypto-spec-vector.adoc") of riscv-crypto. + - const: xandespmu + description: + The Andes Technology performance monitor extension for counter overflow + and privilege mode filtering. For more details, see Counter Related + Registers in the AX45MP datasheet. + https://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml index 717f6b321f88..340d01d481d1 100644 --- a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml +++ b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml @@ -37,6 +37,10 @@ properties: description: If set, the RNG configuration in RNG_CR, RNG_HTCR and RNG_NSCR will be locked. + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt deleted file mode 100644 index 2405e35a1bc0..000000000000 --- a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt +++ /dev/null @@ -1,31 +0,0 @@ -Abracon ABX80X I2C ultra low power RTC/Alarm chip - -The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801, -ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805 -is the superset of ab180x. - -Required properties: - - - "compatible": should one of: - "abracon,abx80x" - "abracon,ab0801" - "abracon,ab0803" - "abracon,ab0804" - "abracon,ab0805" - "abracon,ab1801" - "abracon,ab1803" - "abracon,ab1804" - "abracon,ab1805" - "microcrystal,rv1805" - Using "abracon,abx80x" will enable chip autodetection. - - "reg": I2C bus address of the device - -Optional properties: - -The abx804 and abx805 have a trickle charger that is able to charge the -connected battery or supercap. Both the following properties have to be defined -and valid to enable charging: - - - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V) - - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output - resistor, the other values are in kOhm. diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml new file mode 100644 index 000000000000..355b0598411a --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Abracon ABX80X I2C ultra low power RTC/Alarm chip + +maintainers: + - linux-rtc@vger.kernel.org + +properties: + compatible: + description: + The wildcard 'abracon,abx80x' may be used to support a mix + of different abracon rtc`s. In this case the driver + must perform auto-detection from ID register. + enum: + - abracon,abx80x + - abracon,ab0801 + - abracon,ab0803 + - abracon,ab0804 + - abracon,ab0805 + - abracon,ab1801 + - abracon,ab1803 + - abracon,ab1804 + - abracon,ab1805 + - microcrystal,rv1805 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + abracon,tc-diode: + description: + Trickle-charge diode type. + Required to enable charging backup battery. + + Supported are 'standard' diodes with a 0.6V drop + and 'schottky' diodes with a 0.3V drop. + $ref: /schemas/types.yaml#/definitions/string + enum: + - standard + - schottky + + abracon,tc-resistor: + description: + Trickle-charge resistor value in kOhm. + Required to enable charging backup battery. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 3, 6, 11] + +dependentRequired: + abracon,tc-diode: ["abracon,tc-resistor"] + abracon,tc-resistor: ["abracon,tc-diode"] + +required: + - compatible + - reg + +allOf: + - $ref: rtc.yaml# + - if: + properties: + compatible: + not: + contains: + enum: + - abracon,abx80x + - abracon,ab0804 + - abracon,ab1804 + - abracon,ab0805 + - abracon,ab1805 + then: + properties: + abracon,tc-diode: false + abracon,tc-resistor: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rtc@69 { + compatible = "abracon,abx80x"; + reg = <0x69>; + abracon,tc-diode = "schottky"; + abracon,tc-resistor = <3>; + interrupts = <44 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml b/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml index b80b85c394ac..a7f6c1d1a08a 100644 --- a/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml +++ b/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml @@ -19,7 +19,9 @@ properties: - items: - const: atmel,at91sam9260-rtt - items: - - const: microchip,sam9x60-rtt + - enum: + - microchip,sam9x60-rtt + - microchip,sam9x7-rtt - const: atmel,at91sam9260-rtt - items: - const: microchip,sama7g5-rtt diff --git a/Documentation/devicetree/bindings/rtc/mediatek,mt2712-rtc.yaml b/Documentation/devicetree/bindings/rtc/mediatek,mt2712-rtc.yaml new file mode 100644 index 000000000000..75624ddf6d4d --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/mediatek,mt2712-rtc.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/mediatek,mt2712-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT2712 on-SoC RTC + +allOf: + - $ref: rtc.yaml# + +maintainers: + - Ran Bi <ran.bi@mediatek.com> + +properties: + compatible: + const: mediatek,mt2712-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + rtc@10011000 { + compatible = "mediatek,mt2712-rtc"; + reg = <0x10011000 0x1000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>; + }; diff --git a/Documentation/devicetree/bindings/rtc/mediatek,mt7622-rtc.yaml b/Documentation/devicetree/bindings/rtc/mediatek,mt7622-rtc.yaml new file mode 100644 index 000000000000..e74dfc161cfc --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/mediatek,mt7622-rtc.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/mediatek,mt7622-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT7622 on-SoC RTC + +allOf: + - $ref: rtc.yaml# + +maintainers: + - Sean Wang <sean.wang@mediatek.com> + +properties: + compatible: + items: + - const: mediatek,mt7622-rtc + - const: mediatek,soc-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: rtc + +required: + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt7622-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + rtc@10212800 { + compatible = "mediatek,mt7622-rtc", "mediatek,soc-rtc"; + reg = <0x10212800 0x200>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_RTC>; + clock-names = "rtc"; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt b/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt deleted file mode 100644 index c33d87e5e753..000000000000 --- a/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt +++ /dev/null @@ -1,14 +0,0 @@ -Device-Tree bindings for MediaTek SoC based RTC - -Required properties: -- compatible : Should be "mediatek,mt2712-rtc" : for MT2712 SoC -- reg : Specifies base physical address and size of the registers; -- interrupts : Should contain the interrupt for RTC alarm; - -Example: - -rtc: rtc@10011000 { - compatible = "mediatek,mt2712-rtc"; - reg = <0 0x10011000 0 0x1000>; - interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>; -}; diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt b/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt deleted file mode 100644 index 09fe8f51476f..000000000000 --- a/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt +++ /dev/null @@ -1,21 +0,0 @@ -Device-Tree bindings for MediaTek SoC based RTC - -Required properties: -- compatible : Should be - "mediatek,mt7622-rtc", "mediatek,soc-rtc" : for MT7622 SoC -- reg : Specifies base physical address and size of the registers; -- interrupts : Should contain the interrupt for RTC alarm; -- clocks : Specifies list of clock specifiers, corresponding to - entries in clock-names property; -- clock-names : Should contain "rtc" entries - -Example: - -rtc: rtc@10212800 { - compatible = "mediatek,mt7622-rtc", - "mediatek,soc-rtc"; - reg = <0 0x10212800 0 0x200>; - interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>; - clocks = <&topckgen CLK_TOP_RTC>; - clock-names = "rtc"; -}; diff --git a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml index d1f5eb996dba..01cc90fee81e 100644 --- a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml @@ -18,7 +18,13 @@ allOf: properties: compatible: - const: xlnx,zynqmp-rtc + oneOf: + - const: xlnx,zynqmp-rtc + - items: + - enum: + - xlnx,versal-rtc + - xlnx,versal-net-rtc + - const: xlnx,zynqmp-rtc reg: maxItems: 1 @@ -48,6 +54,9 @@ properties: default: 0x198233 deprecated: true + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml index 65cb2e5c5eee..eb2992a447d7 100644 --- a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml +++ b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) maintainers: - - Richard Genoud <richard.genoud@gmail.com> + - Richard Genoud <richard.genoud@bootlin.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml index e35ad1109efc..2129247d7c81 100644 --- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml +++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml @@ -55,6 +55,7 @@ required: allOf: - $ref: serial.yaml# + - $ref: rs485.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml index 3a5b59f5d3e3..3f9ace89dee9 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml @@ -30,6 +30,7 @@ properties: - items: - enum: - fsl,imx93-lpuart + - fsl,imx95-lpuart - const: fsl,imx8ulp-lpuart - const: fsl,imx7ulp-lpuart - items: diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml index 2046e2dc0a3d..9480ed30915c 100644 --- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml @@ -59,6 +59,7 @@ properties: - renesas,hscif-r8a779a0 # R-Car V3U - renesas,hscif-r8a779f0 # R-Car S4-8 - renesas,hscif-r8a779g0 # R-Car V4H + - renesas,hscif-r8a779h0 # R-Car V4M - const: renesas,rcar-gen4-hscif # R-Car Gen4 - const: renesas,hscif # generic HSCIF compatible UART diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 133259ed3a34..0f0131026911 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -143,6 +143,8 @@ allOf: then: required: - samsung,uart-fifosize + properties: + reg-io-width: false unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml index 65804ca274ae..ffc9198ae214 100644 --- a/Documentation/devicetree/bindings/serial/serial.yaml +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -88,7 +88,7 @@ properties: TX FIFO threshold configuration (in bytes). patternProperties: - "^(bluetooth|bluetooth-gnss|gnss|gps|mcu)$": + "^(bluetooth|bluetooth-gnss|gnss|gps|mcu|onewire)$": if: type: object then: diff --git a/Documentation/devicetree/bindings/serial/st,asc.yaml b/Documentation/devicetree/bindings/serial/st,asc.yaml new file mode 100644 index 000000000000..f2083388f36b --- /dev/null +++ b/Documentation/devicetree/bindings/serial/st,asc.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/st,asc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STi SoCs Serial Port + +maintainers: + - Patrice Chotard <patrice.chotard@foss.st.com> + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + const: st,asc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + st,hw-flow-ctrl: + description: When set, enable hardware flow control. + type: boolean + + st,force-m1: + description: When set, force asc to be in Mode-1. This is recommended for + high bit rates above 19.2K. + type: boolean + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/stih407-clks.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + serial@9830000 { + compatible = "st,asc"; + reg = <0x9830000 0x2c>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + }; +... diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml index 1df8ffe95fc6..2ed526139269 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml @@ -58,6 +58,9 @@ properties: wakeup-source: true + power-domains: + maxItems: 1 + rx-threshold: description: If value is set to 1, RX FIFO threshold is disabled. @@ -70,6 +73,10 @@ properties: enum: [1, 2, 4, 8, 12, 14, 16] default: 8 + access-controllers: + minItems: 1 + maxItems: 2 + allOf: - $ref: rs485.yaml# - $ref: serial.yaml# diff --git a/Documentation/devicetree/bindings/serial/st-asc.txt b/Documentation/devicetree/bindings/serial/st-asc.txt deleted file mode 100644 index a1b9b6f3490a..000000000000 --- a/Documentation/devicetree/bindings/serial/st-asc.txt +++ /dev/null @@ -1,18 +0,0 @@ -*st-asc(Serial Port) - -Required properties: -- compatible : Should be "st,asc". -- reg, reg-names, interrupts, interrupt-names : Standard way to define device - resources with names. look in - Documentation/devicetree/bindings/resource-names.txt - -Optional properties: -- st,hw-flow-ctrl bool flag to enable hardware flow control. -- st,force-m1 bool flat to force asc to be in Mode-1 recommended - for high bit rates (above 19.2K) -Example: -serial@fe440000{ - compatible = "st,asc"; - reg = <0xfe440000 0x2c>; - interrupts = <0 209 0>; -}; diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml index 397f75909b20..ce1a6505eb51 100644 --- a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml @@ -51,7 +51,7 @@ properties: ranges: true patternProperties: - "^clock-controller@[0-9a-z]+$": + "^clock-controller@[0-9a-f]+$": $ref: /schemas/clock/fsl,flexspi-clock.yaml# required: diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml index 8d088b5fe823..a6a511b00a12 100644 --- a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml @@ -41,7 +41,7 @@ properties: ranges: true patternProperties: - "^interrupt-controller@[a-z0-9]+$": + "^interrupt-controller@[a-f0-9]+$": $ref: /schemas/interrupt-controller/fsl,ls-extirq.yaml# required: diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml index d3f3259ef77d..4512390f90f0 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml @@ -23,6 +23,7 @@ properties: oneOf: - items: - enum: + - qcom,qcm6490-pmic-glink - qcom,sc8180x-pmic-glink - qcom,sc8280xp-pmic-glink - qcom,sm8350-pmic-glink @@ -57,20 +58,6 @@ patternProperties: required: - compatible -allOf: - - if: - not: - properties: - compatible: - contains: - enum: - - qcom,sm8450-pmic-glink - - qcom,sm8550-pmic-glink - - qcom,x1e80100-pmic-glink - then: - properties: - orientation-gpios: false - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml index 74bb92e31554..fd6db0ca98eb 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml @@ -116,8 +116,8 @@ examples: bluetooth { compatible = "qcom,wcnss-bt"; - /* BD address 00:11:22:33:44:55 */ - local-bd-address = [ 55 44 33 22 11 00 ]; + /* Updated by boot firmware (little-endian order) */ + local-bd-address = [ 00 00 00 00 00 00 ]; }; wifi { diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml new file mode 100644 index 000000000000..ebbf0c9109ce --- /dev/null +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/renesas/renesas,r9a09g057-sys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2H(P) System Controller (SYS) + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: | + The RZ/V2H(P) SYS (System Controller) controls the overall + configuration of the LSI and supports the following functions, + - Trust zone control + - Extend access by specific masters to address beyond 4GB space + - GBETH configuration + - Control of settings and states of SRAM/PCIe/CM33/CA55/CR8/xSPI/ADC/TSU + - LSI version + - WDT stop control + - General registers + +properties: + compatible: + const: renesas,r9a09g057-sys + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - resets + +additionalProperties: false + +examples: + - | + sys: system-controller@10430000 { + compatible = "renesas,r9a09g057-sys"; + reg = <0x10430000 0x10000>; + clocks = <&cpg 1>; + resets = <&cpg 1>; + }; diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml index c1ce4da2dc32..09d3ce97efa2 100644 --- a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml +++ b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml @@ -513,6 +513,14 @@ properties: - renesas,rzv2mevk2 # RZ/V2M Eval Board v2.0 - const: renesas,r9a09g011 + - description: RZ/V2H(P) (R9A09G057) + items: + - enum: + - renesas,r9a09g057h41 # RZ/V2H + - renesas,r9a09g057h42 # RZ/V2H with Mali-G31 support + - renesas,r9a09g057h44 # RZ/V2HP with Mali-G31 + Mali-C55 support + - const: renesas,r9a09g057 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index 0b87c266760c..79798c747476 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -171,6 +171,7 @@ allOf: unevaluatedProperties: false pcie-phy: + type: object description: Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt diff --git a/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml index c0c6ce8fc786..3ca220582897 100644 --- a/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml @@ -15,6 +15,7 @@ properties: - items: - enum: - google,gs101-apm-sysreg + - google,gs101-hsi2-sysreg - google,gs101-peric0-sysreg - google,gs101-peric1-sysreg - samsung,exynos3-sysreg @@ -72,6 +73,7 @@ allOf: compatible: contains: enum: + - google,gs101-hsi2-sysreg - google,gs101-peric0-sysreg - google,gs101-peric1-sysreg - samsung,exynos850-cmgp-sysreg diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml index 7f9d8c7a635a..99a536601cc7 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml @@ -185,11 +185,12 @@ properties: gpio-ranges: items: - - description: A phandle to the CODEC pinctrl node - minimum: 0 - - const: 0 - - const: 0 - - const: 3 + - items: + - description: A phandle to the CODEC pinctrl node + minimum: 0 + - const: 0 + - const: 0 + - const: 3 patternProperties: "-state$": diff --git a/Documentation/devicetree/bindings/sound/qcom,q6usb.yaml b/Documentation/devicetree/bindings/sound/qcom,q6usb.yaml new file mode 100644 index 000000000000..37161d2aa96e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6usb.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,q6usb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm ASoC DPCM USB backend DAI + +maintainers: + - Wesley Cheng <quic_wcheng@quicinc.com> + +description: + The USB port is a supported AFE path on the Q6 DSP. This ASoC DPCM + backend DAI will communicate the required settings to initialize the + XHCI host controller properly for enabling the offloaded audio stream. + Parameters defined under this node will carry settings, which will be + passed along during the QMI stream enable request and configuration of + the XHCI host controller. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - qcom,q6usb + + iommus: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + qcom,usb-audio-intr-idx: + description: + Desired XHCI interrupter number to use. Depending on the audio DSP + on the platform, it will operate on a specific XHCI interrupter. + $ref: /schemas/types.yaml#/definitions/uint16 + maximum: 8 + +required: + - compatible + - "#sound-dai-cells" + - qcom,usb-audio-intr-idx + +additionalProperties: false + +examples: + - | + dais { + compatible = "qcom,q6usb"; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x180f 0x0>; + qcom,usb-audio-intr-idx = /bits/ 16 <2>; + }; diff --git a/Documentation/devicetree/bindings/sound/rt5645.txt b/Documentation/devicetree/bindings/sound/rt5645.txt index 41a62fd2ae1f..c1fa379f5f3e 100644 --- a/Documentation/devicetree/bindings/sound/rt5645.txt +++ b/Documentation/devicetree/bindings/sound/rt5645.txt @@ -20,6 +20,11 @@ Optional properties: a GPIO spec for the external headphone detect pin. If jd-mode = 0, we will get the JD status by getting the value of hp-detect-gpios. +- cbj-sleeve-gpios: + a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2 + contacts to the ground or floating. It could avoid some electric noise from the + active speaker jacks. + - realtek,in2-differential Boolean. Indicate MIC2 input are differential, rather than single-ended. @@ -68,6 +73,7 @@ codec: rt5650@1a { compatible = "realtek,rt5650"; reg = <0x1a>; hp-detect-gpios = <&gpio 19 0>; + cbj-sleeve-gpios = <&gpio 20 0>; interrupt-parent = <&gpio>; interrupts = <7 IRQ_TYPE_EDGE_FALLING>; realtek,dmic-en = "true"; diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml index b9111d375b93..8978f6bd63e5 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml @@ -65,6 +65,10 @@ properties: $ref: audio-graph-port.yaml# unevaluatedProperties: false + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - "#sound-dai-cells" diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml index 59df8a832310..b46a4778807d 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -48,6 +48,10 @@ properties: clock-names: maxItems: 3 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml index bc48151b9adb..3dedc81ec12f 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml @@ -50,6 +50,10 @@ properties: resets: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - "#sound-dai-cells" diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml index 8bba965a9ae6..3f1a27efff80 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml @@ -46,6 +46,10 @@ properties: - const: tx - const: rx + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml index 4bd9aeb81208..a55c8633c32c 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml @@ -52,6 +52,10 @@ properties: - const: rx - const: tx + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml index 9b2272a9ec15..6b3aea6d73b0 100644 --- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml +++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml @@ -21,6 +21,7 @@ properties: - allwinner,sun50i-a100-ths - allwinner,sun50i-h5-ths - allwinner,sun50i-h6-ths + - allwinner,sun50i-h616-ths clocks: minItems: 1 @@ -50,6 +51,10 @@ properties: nvmem-cell-names: const: calibration + allwinner,sram: + maxItems: 1 + description: phandle to device controlling temperate offset SYS_CFG register + # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details "#thermal-sensor-cells": enum: @@ -65,6 +70,7 @@ allOf: - allwinner,sun20i-d1-ths - allwinner,sun50i-a100-ths - allwinner,sun50i-h6-ths + - allwinner,sun50i-h616-ths then: properties: @@ -83,6 +89,17 @@ allOf: minItems: 2 - if: + not: + properties: + compatible: + contains: + const: allwinner,sun50i-h616-ths + + then: + properties: + allwinner,sram: false + + - if: properties: compatible: contains: @@ -101,17 +118,12 @@ allOf: const: 1 - if: - properties: - compatible: - contains: - enum: - - allwinner,sun8i-h3-ths - - allwinner,sun8i-r40-ths - - allwinner,sun20i-d1-ths - - allwinner,sun50i-a64-ths - - allwinner,sun50i-a100-ths - - allwinner,sun50i-h5-ths - - allwinner,sun50i-h6-ths + not: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-a83t-ths then: required: diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml index 145744027234..d155d6799da6 100644 --- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml @@ -33,7 +33,8 @@ properties: description: | The values to be programmed into TTRnCR, as specified by the SoC reference manual. The first cell is TTR0CR, the second is TTR1CR, etc. - maxItems: 4 + minItems: 2 + maxItems: 7 fsl,tmu-calibration: $ref: /schemas/types.yaml#/definitions/uint32-matrix diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml index ecf276fd155c..6a81cb6e11bc 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml @@ -29,6 +29,7 @@ properties: - renesas,r8a779a0-thermal # R-Car V3U - renesas,r8a779f0-thermal # R-Car S4-8 - renesas,r8a779g0-thermal # R-Car V4H + - renesas,r8a779h0-thermal # R-Car V4M reg: true @@ -90,6 +91,7 @@ else: enum: - renesas,r8a779f0-thermal - renesas,r8a779g0-thermal + - renesas,r8a779h0-thermal then: required: - interrupts diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml index dbd52620d293..68398e7e8655 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml @@ -228,8 +228,6 @@ patternProperties: additionalProperties: false required: - - polling-delay - - polling-delay-passive - thermal-sensors - trips diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml index 7a4a6ab85970..ab8f28993139 100644 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml @@ -60,7 +60,7 @@ properties: be implemented in an always-on power domain." patternProperties: - '^frame@[0-9a-z]*$': + '^frame@[0-9a-f]+$': type: object additionalProperties: false description: A timer node has up to 8 frame sub-nodes, each with the following properties. diff --git a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml index dbba780c9b02..da342464d32e 100644 --- a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml +++ b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml @@ -32,12 +32,23 @@ properties: description: | Bit width of the timer, necessary if not 16. + "#pwm-cells": + const: 3 + required: - compatible - reg - - interrupts - clocks +allOf: + - if: + not: + required: + - "#pwm-cells" + then: + required: + - interrupts + additionalProperties: false examples: @@ -50,3 +61,12 @@ examples: clocks = <&cpu_clk 3>; timer-width = <32>; }; + + - | + pwm: pwm@f8002000 { + compatible = "cdns,ttc"; + reg = <0xf8002000 0x1000>; + clocks = <&cpu_clk 3>; + timer-width = <32>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml index 2b9653dafab8..891cca009528 100644 --- a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml +++ b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml @@ -18,7 +18,9 @@ description: | properties: compatible: - const: nxp,sysctr-timer + enum: + - nxp,imx95-sysctr-timer + - nxp,sysctr-timer reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/timer/ralink,cevt-systick.yaml b/Documentation/devicetree/bindings/timer/ralink,cevt-systick.yaml new file mode 100644 index 000000000000..59d97feddf4e --- /dev/null +++ b/Documentation/devicetree/bindings/timer/ralink,cevt-systick.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/ralink,cevt-systick.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: System tick counter present in Ralink family SoCs + +maintainers: + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +properties: + compatible: + const: ralink,cevt-systick + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + systick@d00 { + compatible = "ralink,cevt-systick"; + reg = <0xd00 0x10>; + + interrupt-parent = <&cpuintc>; + interrupts = <7>; + }; +... diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml index 7207929e5cd6..8b06a681764e 100644 --- a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml @@ -23,7 +23,7 @@ properties: - enum: - renesas,r7s72100-ostm # RZ/A1H - renesas,r7s9210-ostm # RZ/A2M - - renesas,r9a07g043-ostm # RZ/G2UL + - renesas,r9a07g043-ostm # RZ/G2UL and RZ/Five - renesas,r9a07g044-ostm # RZ/G2{L,LC} - renesas,r9a07g054-ostm # RZ/V2L - const: renesas,ostm # Generic diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml index a67e427a9e7e..84bbe15028a1 100644 --- a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml @@ -46,7 +46,19 @@ properties: interrupts: minItems: 2 - maxItems: 3 + items: + - description: Underflow interrupt, channel 0 + - description: Underflow interrupt, channel 1 + - description: Underflow interrupt, channel 2 + - description: Input capture interrupt, channel 2 + + interrupt-names: + minItems: 2 + items: + - const: tuni0 + - const: tuni1 + - const: tuni2 + - const: ticpi2 clocks: maxItems: 1 @@ -100,7 +112,9 @@ examples: reg = <0xffd80000 0x30>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&mstp0_clks R8A7779_CLK_TMU0>; clock-names = "fck"; power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml index 829bd2227f7c..774b7992a0ca 100644 --- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml @@ -26,6 +26,7 @@ properties: - items: - enum: - axis,artpec8-mct + - google,gs101-mct - samsung,exynos3250-mct - samsung,exynos5250-mct - samsung,exynos5260-mct @@ -127,6 +128,7 @@ allOf: contains: enum: - axis,artpec8-mct + - google,gs101-mct - samsung,exynos5260-mct - samsung,exynos5420-mct - samsung,exynos5433-mct diff --git a/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-i2c.yaml b/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-i2c.yaml index 3ab4434b7352..af7720dc4a12 100644 --- a/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-i2c.yaml +++ b/Documentation/devicetree/bindings/tpm/tcg,tpm-tis-i2c.yaml @@ -32,6 +32,7 @@ properties: - enum: - infineon,slb9673 - nuvoton,npct75x + - st,st33ktpm2xi2c - const: tcg,tpm-tis-i2c - description: TPM 1.2 and 2.0 chips with vendor-specific I²C interface diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml index 10c146424baa..cd3680dc002f 100644 --- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml @@ -27,10 +27,13 @@ properties: - qcom,msm8996-ufshc - qcom,msm8998-ufshc - qcom,sa8775p-ufshc + - qcom,sc7180-ufshc - qcom,sc7280-ufshc + - qcom,sc8180x-ufshc - qcom,sc8280xp-ufshc - qcom,sdm845-ufshc - qcom,sm6115-ufshc + - qcom,sm6125-ufshc - qcom,sm6350-ufshc - qcom,sm8150-ufshc - qcom,sm8250-ufshc @@ -42,11 +45,11 @@ properties: - const: jedec,ufs-2.0 clocks: - minItems: 8 + minItems: 7 maxItems: 11 clock-names: - minItems: 8 + minItems: 7 maxItems: 11 dma-coherent: true @@ -117,9 +120,35 @@ allOf: compatible: contains: enum: + - qcom,sc7180-ufshc + then: + properties: + clocks: + minItems: 7 + maxItems: 7 + clock-names: + items: + - const: core_clk + - const: bus_aggr_clk + - const: iface_clk + - const: core_clk_unipro + - const: ref_clk + - const: tx_lane0_sync_clk + - const: rx_lane0_sync_clk + reg: + maxItems: 1 + reg-names: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: - qcom,msm8998-ufshc - qcom,sa8775p-ufshc - qcom,sc7280-ufshc + - qcom,sc8180x-ufshc - qcom,sc8280xp-ufshc - qcom,sm8250-ufshc - qcom,sm8350-ufshc @@ -215,6 +244,7 @@ allOf: contains: enum: - qcom,sm6115-ufshc + - qcom,sm6125-ufshc then: properties: clocks: @@ -248,7 +278,7 @@ allOf: reg: maxItems: 1 clocks: - minItems: 8 + minItems: 7 maxItems: 8 else: properties: @@ -256,7 +286,7 @@ allOf: minItems: 1 maxItems: 2 clocks: - minItems: 8 + minItems: 7 maxItems: 11 unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml index e4d893369d57..3f5857aee3b0 100644 --- a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml +++ b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml @@ -23,24 +23,11 @@ properties: connector: type: object $ref: ../connector/usb-connector.yaml - unevaluatedProperties: false - - description: - Properties for usb c connector. properties: compatible: const: usb-c-connector - power-role: true - - data-role: true - - try-power-role: true - - required: - - compatible - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml index b7e664f7395b..3b56e0edb1c6 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml @@ -313,7 +313,7 @@ properties: usb-phy: description: phandle for the PHY device. Use "phys" instead. - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 deprecated: true fsl,usbphy: diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index 0a5c98ea711d..88c077673c8b 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -172,6 +172,10 @@ properties: tpl-support: true + access-controllers: + minItems: 1 + maxItems: 2 + dependencies: port: [ usb-role-switch ] role-switch-default-mode: [ usb-role-switch ] diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml index f9410eb76a62..8b25b9a01ced 100644 --- a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml +++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml @@ -27,13 +27,8 @@ properties: vcc-supply: description: power supply (2.7V-5.5V) - mode-switch: - description: Flag the port as possible handle of altmode switching - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + mode-switch: true + orientation-switch: true port: $ref: /schemas/graph.yaml#/$defs/port-base @@ -79,6 +74,9 @@ required: - reg - port +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml b/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml index 2d3589d284b2..0a6e7ac1b37e 100644 --- a/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml +++ b/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml @@ -33,6 +33,7 @@ properties: - fsl,imx7ulp-usbmisc - fsl,imx8mm-usbmisc - fsl,imx8mn-usbmisc + - fsl,imx8ulp-usbmisc - const: fsl,imx7d-usbmisc - const: fsl,imx6q-usbmisc - items: diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 87986c45be88..2ed178f16a78 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -77,6 +77,7 @@ properties: - const: usb-ehci - enum: - generic-ehci + - marvell,ac5-ehci - marvell,armada-3700-ehci - marvell,orion-ehci - nuvoton,npcm750-ehci diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml index d3b2b666ec2a..88e1607cf053 100644 --- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml +++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml @@ -33,13 +33,8 @@ properties: vcc-supply: description: power supply - mode-switch: - description: Flag the port as possible handle of altmode switching - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + mode-switch: true + orientation-switch: true port: $ref: /schemas/graph.yaml#/properties/port @@ -54,6 +49,9 @@ required: - orientation-switch - port +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/hisilicon,hi3798mv200-dwc3.yaml b/Documentation/devicetree/bindings/usb/hisilicon,hi3798mv200-dwc3.yaml new file mode 100644 index 000000000000..f3011694393d --- /dev/null +++ b/Documentation/devicetree/bindings/usb/hisilicon,hi3798mv200-dwc3.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/hisilicon,hi3798mv200-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon Hi3798MV200 DWC3 USB SoC controller + +maintainers: + - Yang Xiwen <forbidden405@foxmail.com> + +properties: + compatible: + const: hisilicon,hi3798mv200-dwc3 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + + clocks: + items: + - description: Controller bus clock + - description: Controller suspend clock + - description: Controller reference clock + - description: Controller gm clock + - description: Controller gs clock + - description: Controller utmi clock + - description: Controller pipe clock + + clock-names: + items: + - const: bus + - const: suspend + - const: ref + - const: gm + - const: gs + - const: utmi + - const: pipe + + resets: + maxItems: 1 + + reset-names: + const: soft + +patternProperties: + '^usb@[0-9a-f]+$': + $ref: snps,dwc3.yaml# + +required: + - compatible + - ranges + - '#address-cells' + - '#size-cells' + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb { + compatible = "hisilicon,hi3798mv200-dwc3"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&clk_bus>, + <&clk_suspend>, + <&clk_ref>, + <&clk_gm>, + <&clk_gs>, + <&clk_utmi>, + <&clk_pipe>; + clock-names = "bus", "suspend", "ref", "gm", "gs", "utmi", "pipe"; + resets = <&crg 0xb0 12>; + reset-names = "soft"; + + usb@98a0000 { + compatible = "snps,dwc3"; + reg = <0x98a0000 0x10000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>, + <&clk_suspend>, + <&clk_ref>; + clock-names = "bus_early", "suspend", "ref"; + phys = <&usb2_phy1_port2>, <&combphy0 0>; + phy-names = "usb2-phy", "usb3-phy"; + maximum-speed = "super-speed"; + dr_mode = "host"; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/ite,it5205.yaml b/Documentation/devicetree/bindings/usb/ite,it5205.yaml new file mode 100644 index 000000000000..36ec4251b5f2 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ite,it5205.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ite,it5205.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ITE IT5202 Type-C USB Alternate Mode Passive MUX + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + - Tianping Fang <tianping.fang@mediatek.com> + +properties: + compatible: + const: ite,it5205 + + reg: + maxItems: 1 + + vcc-supply: + description: Power supply for VCC pin (3.3V) + + mode-switch: + description: Flag the port as possible handle of altmode switching + type: boolean + + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + + ite,ovp-enable: + description: Enable Over Voltage Protection functionality + type: boolean + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the IT5205 to a TypeC controller for the purpose of + handling altmode muxing and orientation switching. + +required: + - compatible + - reg + - orientation-switch + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c2 { + #address-cells = <1>; + #size-cells = <0>; + + typec-mux@48 { + compatible = "ite,it5205"; + reg = <0x48>; + + mode-switch; + orientation-switch; + + vcc-supply = <&mt6359_vibr_ldo_reg>; + + port { + it5205_usbss_sbu: endpoint { + remote-endpoint = <&typec_controller>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml index a59d91243ac8..d4e187c78a0b 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml @@ -185,7 +185,10 @@ properties: 2 - used by mt2712 etc, revision 2 with following IPM rule; 101 - used by mt8183, specific 1.01; 102 - used by mt8192, specific 1.02; - enum: [1, 2, 101, 102] + 103 - used by mt8195, IP0, specific 1.03; + 105 - used by mt8195, IP2, specific 1.05; + 106 - used by mt8195, IP3, specific 1.06; + enum: [1, 2, 101, 102, 103, 105, 106] mediatek,u3p-dis-msk: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml index 445183d9d6db..e2a72deae776 100644 --- a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml +++ b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml @@ -72,8 +72,6 @@ allOf: i2c-bus: false else: $ref: /schemas/usb/usb-device.yaml - required: - - peer-hub additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml index eee548ac1abe..d805dde80796 100644 --- a/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml +++ b/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml @@ -20,13 +20,8 @@ properties: vdd18-supply: description: Power supply for VDD18 pin - retimer-switch: - description: Flag the port as possible handle of SuperSpeed signals retiming - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + orientation-switch: true + retimer-switch: true ports: $ref: /schemas/graph.yaml#/properties/ports @@ -49,6 +44,9 @@ required: - compatible - reg +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml index eaedb4cc6b6c..65a8632b4d9e 100644 --- a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml +++ b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml @@ -11,7 +11,9 @@ maintainers: properties: compatible: - const: nxp,ptn5110 + items: + - const: nxp,ptn5110 + - const: tcpci reg: maxItems: 1 @@ -41,7 +43,7 @@ examples: #size-cells = <0>; tcpci@50 { - compatible = "nxp,ptn5110"; + compatible = "nxp,ptn5110", "tcpci"; reg = <0x50>; interrupt-parent = <&gpio3>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; diff --git a/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml index c0201da002f6..589914d22bf2 100644 --- a/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml +++ b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml @@ -21,14 +21,8 @@ properties: description: power supply (1.8V) enable-gpios: true - - retimer-switch: - description: Flag the port as possible handle of SuperSpeed signals retiming - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + orientation-switch: true + retimer-switch: true ports: $ref: /schemas/graph.yaml#/properties/ports @@ -95,6 +89,9 @@ required: - compatible - reg +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index 63d150b216c5..38a3404ec71b 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -102,7 +102,7 @@ properties: description: | Different types of interrupts are used based on HS PHY used on target: - pwr_event: Used for wakeup based on other power events. - - hs_phY_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is + - hs_phy_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is hs_phy_irq which is not triggered by default and its functionality is mutually exclusive to that of {dp/dm}_hs_phy_irq and qusb2_phy_irq. diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml index 55df3129a0bc..d9694570c419 100644 --- a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml @@ -14,8 +14,19 @@ description: properties: compatible: - enum: - - qcom,pm8150b-typec + oneOf: + - enum: + - qcom,pmi632-typec + - qcom,pm8150b-typec + - items: + - enum: + - qcom,pm6150-typec + - const: qcom,pm8150b-typec + - items: + - enum: + - qcom,pm4125-typec + - const: qcom,pmi632-typec + connector: type: object @@ -24,9 +35,11 @@ properties: reg: description: Type-C port and pdphy SPMI register base offsets + minItems: 1 maxItems: 2 interrupts: + minItems: 8 items: - description: Type-C CC attach notification, VBUS error, tCCDebounce done - description: Type-C VCONN powered @@ -46,6 +59,7 @@ properties: - description: Power Domain Fast Role Swap event interrupt-names: + minItems: 8 items: - const: or-rid-detect-change - const: vpd-detect @@ -81,7 +95,33 @@ required: - interrupts - interrupt-names - vdd-vbus-supply - - vdd-pdphy-supply + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,pmi632-typec + then: + properties: + reg: + maxItems: 1 + interrupts: + maxItems: 8 + interrupt-names: + maxItems: 8 + vdd-pdphy-supply: false + else: + properties: + reg: + maxItems: 2 + interrupts: + minItems: 16 + interrupt-names: + maxItems: 16 + required: + - vdd-pdphy-supply additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml b/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml index 7ddfd3313a18..96346723f3e9 100644 --- a/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml @@ -35,13 +35,8 @@ properties: vdd-supply: description: USBSS VDD power supply - mode-switch: - description: Flag the port as possible handle of altmode switching - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + mode-switch: true + orientation-switch: true ports: $ref: /schemas/graph.yaml#/properties/ports @@ -63,6 +58,9 @@ required: - reg - ports +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml index f0784d2e86da..0874fc21f66f 100644 --- a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml +++ b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml @@ -21,6 +21,12 @@ properties: reg: true + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + vdd-supply: description: phandle to the regulator that provides power to the hub. @@ -30,6 +36,36 @@ properties: description: phandle to the peer hub on the controller. + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + 1st downstream facing USB port + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + 2nd downstream facing USB port + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + 3rd downstream facing USB port + + port@4: + $ref: /schemas/graph.yaml#/properties/port + description: + 4th downstream facing USB port + +patternProperties: + '^.*@[1-4]$': + description: The hard wired USB devices + type: object + $ref: /schemas/usb/usb-device.yaml + required: - peer-hub - compatible @@ -50,6 +86,13 @@ examples: reg = <1>; vdd-supply = <&pp3300_hub>; peer-hub = <&hub_3_0>; + #address-cells = <1>; + #size-cells = <0>; + /* USB 2.0 device on port 2 */ + device@2 { + compatible = "usb123,4567"; + reg = <2>; + }; }; /* 3.0 hub on port 2 */ @@ -58,5 +101,17 @@ examples: reg = <2>; vdd-supply = <&pp3300_hub>; peer-hub = <&hub_2_0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + /* Type-A connector on port 4 */ + port@4 { + reg = <4>; + endpoint { + remote-endpoint = <&usb_a0_ss>; + }; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml index fec5651f5602..f6e6d084d1c5 100644 --- a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml @@ -14,7 +14,10 @@ properties: const: ti,am62-usb reg: - maxItems: 1 + minItems: 1 + items: + - description: USB CFG register space + - description: USB PHY2 register space ranges: true @@ -82,7 +85,8 @@ examples: usbss1: usb@f910000 { compatible = "ti,am62-usb"; - reg = <0x00 0x0f910000 0x00 0x800>; + reg = <0x00 0x0f910000 0x00 0x800>, + <0x00 0x0f918000 0x00 0x400>; clocks = <&k3_clks 162 3>; clock-names = "ref"; ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>; diff --git a/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml new file mode 100644 index 000000000000..8ef117793e11 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ti,usb8020b.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI USB8020B USB 3.0 hub controller + +maintainers: + - Macpaul Lin <macpaul.lin@mediatek.com> + +allOf: + - $ref: usb-device.yaml# + +properties: + compatible: + enum: + - usb451,8025 + - usb451,8027 + + reg: true + + reset-gpios: + items: + - description: GPIO specifier for GRST# pin. + + vdd-supply: + description: + VDD power supply to the hub + + peer-hub: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the peer hub on the controller. + +required: + - compatible + - reg + - peer-hub + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + usb { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb451,8027"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&usb_hub_fixed_3v3>; + }; + + /* 3.0 hub on port 2 */ + hub_3_0: hub@2 { + compatible = "usb451,8025"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&usb_hub_fixed_3v3>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml index 6734f4d3aa78..9b3ea23654af 100644 --- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml +++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml @@ -37,10 +37,11 @@ properties: description: Should specify the GPIO detecting a VBus insertion maxItems: 1 - vbus-regulator: - description: Should specify the regulator supplying current drawn from - the VBus line. - $ref: /schemas/types.yaml#/definitions/phandle + vbus-supply: + description: regulator supplying VBUS. It will be enabled and disabled + dynamically in OTG mode. If the regulator is controlled by a + GPIO line, this should be modeled as a regulator-fixed and + referenced by this supply. wakeup-source: description: @@ -65,7 +66,7 @@ examples: vcc-supply = <&hsusb1_vcc_regulator>; reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; - vbus-regulator = <&vbus_regulator>; + vbus-supply = <&vbus_regulator>; #phy-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/usb/usb-switch.yaml b/Documentation/devicetree/bindings/usb/usb-switch.yaml new file mode 100644 index 000000000000..da76118e73a5 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-switch.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/usb-switch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB Orientation and Mode Switches Common Properties + +maintainers: + - Greg Kroah-Hartman <gregkh@linuxfoundation.org> + +description: + Common properties for devices handling USB mode and orientation switching. + +properties: + mode-switch: + description: Possible handler of altmode switching + type: boolean + + orientation-switch: + description: Possible handler of orientation switching + type: boolean + + retimer-switch: + description: Possible handler of SuperSpeed signals retiming + type: boolean + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the device to a TypeC controller for the purpose of + handling altmode muxing and orientation switching. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Super Speed (SS) Output endpoint to the Type-C connector + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + description: + Super Speed (SS) Input endpoint from the Super-Speed PHY + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + uniqueItems: true + items: + maximum: 8 + +oneOf: + - required: + - port + - required: + - ports + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/usb/usb.yaml b/Documentation/devicetree/bindings/usb/usb.yaml index 326b14f05d1c..1761b7aa92f0 100644 --- a/Documentation/devicetree/bindings/usb/usb.yaml +++ b/Documentation/devicetree/bindings/usb/usb.yaml @@ -25,6 +25,8 @@ properties: usb-phy: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: List of all the USB PHYs on this HCD to be accepted by the legacy USB Physical Layer subsystem. diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 04505cb0b640..460c729f6e30 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -151,6 +151,8 @@ patternProperties: description: ARM Ltd. "^armadeus,.*": description: ARMadeus Systems SARL + "^armsom,.*": + description: ArmSoM Technology Co., Ltd. "^arrow,.*": description: Arrow Electronics "^artesyn,.*": @@ -438,6 +440,8 @@ patternProperties: description: Dongguan EmbedFire Electronic Technology Co., Ltd. "^embest,.*": description: Shenzhen Embest Technology Co., Ltd. + "^emcraft,.*": + description: Emcraft Systems "^emlid,.*": description: Emlid, Ltd. "^emmicro,.*": @@ -1573,6 +1577,8 @@ patternProperties: description: VoCore Studio "^voipac,.*": description: Voipac Technologies s.r.o. + "^voltafield,.*": + description: Voltafield Technology Corp. "^vot,.*": description: Vision Optical Technology Co., Ltd. "^vscom,.*": @@ -1625,6 +1631,8 @@ patternProperties: description: Wondermedia Technologies, Inc. "^wobo,.*": description: Wobo + "^wolfvision,.*": + description: WolfVision GmbH "^x-powers,.*": description: X-Powers "^xen,.*": diff --git a/Documentation/devicetree/bindings/w1/w1-uart.yaml b/Documentation/devicetree/bindings/w1/w1-uart.yaml new file mode 100644 index 000000000000..bd7c62d780b8 --- /dev/null +++ b/Documentation/devicetree/bindings/w1/w1-uart.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/w1/w1-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UART 1-Wire Bus + +maintainers: + - Christoph Winklhofer <cj.winklhofer@gmail.com> + +description: | + UART 1-wire bus. Utilizes the UART interface via the Serial Device Bus + to create the 1-Wire timing patterns. + + The UART peripheral must support full-duplex and operate in open-drain + mode. The timing patterns are generated by a specific combination of + baud-rate and transmitted byte, which corresponds to a 1-Wire read bit, + write bit or reset pulse. + + The default baud-rate for reset and presence detection is 9600 and for + a 1-Wire read or write operation 115200. In case the actual baud-rate + is different from the requested one, the transmitted byte is adapted + to generate the 1-Wire timing patterns. + + https://www.analog.com/en/technical-articles/using-a-uart-to-implement-a-1wire-bus-master.html + +properties: + compatible: + const: w1-uart + + reset-bps: + default: 9600 + description: + The baud rate for the 1-Wire reset and presence detect. + + write-0-bps: + default: 115200 + description: + The baud rate for the 1-Wire write-0 cycle. + + write-1-bps: + default: 115200 + description: + The baud rate for the 1-Wire write-1 and read cycle. + +required: + - compatible + +additionalProperties: + type: object + +examples: + - | + serial { + onewire { + compatible = "w1-uart"; + }; + }; |