diff options
Diffstat (limited to 'Documentation/devicetree')
133 files changed, 2674 insertions, 1307 deletions
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 8b395893bd85..3e886194b043 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -6,7 +6,7 @@ DT_MK_SCHEMA ?= dt-mk-schema DT_SCHEMA_LINT = $(shell which yamllint || \ echo "warning: python package 'yamllint' not installed, skipping" >&2) -DT_SCHEMA_MIN_VERSION = 2022.3 +DT_SCHEMA_MIN_VERSION = 2023.9 PHONY += check_dtschema_version check_dtschema_version: diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml index 6216cfb0a188..2d5545a2b49c 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml @@ -92,11 +92,8 @@ properties: maxItems: 1 cpu: - $ref: /schemas/types.yaml#/definitions/phandle description: - Handle to cpu this device is associated with. This must appear in the - base cti node if compatible string arm,coresight-cti-v8-arch is used, - or may appear in a trig-conns child node when appropriate. + Handle to cpu this CTI is associated with. power-domains: maxItems: 1 @@ -113,12 +110,12 @@ properties: description: defines a phandle reference to an associated CoreSight trace device. When the associated trace device is enabled, then the respective CTI - will be enabled. Use in a trig-conns node, or in CTI base node when - compatible string arm,coresight-cti-v8-arch used. If the associated - device has not been registered then the node name will be stored as - the connection name for later resolution. If the associated device is - not a CoreSight device or not registered then the node name will remain - the connection name and automatic enabling will not occur. + will be enabled. Use in CTI base node when compatible string + arm,coresight-cti-v8-arch used. If the associated device has not been + registered then the node name will be stored as the connection name for + later resolution. If the associated device is not a CoreSight device or + not registered then the node name will remain the connection name and + automatic enabling will not occur. # size cells and address cells required if trig-conns node present. "#size-cells": @@ -130,6 +127,8 @@ properties: patternProperties: '^trig-conns@([0-9]+)$': type: object + additionalProperties: false + description: A trigger connections child node which describes the trigger signals between this CTI and another hardware device. This device may be a CPU, @@ -141,6 +140,21 @@ patternProperties: reg: maxItems: 1 + cpu: + description: + Handle to cpu this trigger connection is associated with. + + arm,cs-dev-assoc: + $ref: /schemas/types.yaml#/definitions/phandle + description: + defines a phandle reference to an associated CoreSight trace device. + When the associated trace device is enabled, then the respective CTI + will be enabled. If the associated device has not been registered + then the node name will be stored as the connection name for later + resolution. If the associated device is not a CoreSight device or + not registered then the node name will remain the connection name + and automatic enabling will not occur. + arm,trig-in-sigs: $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 0d17cbad9778..c6930fc7f690 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -190,6 +190,7 @@ properties: - qcom,kryo280 - qcom,kryo360 - qcom,kryo385 + - qcom,kryo465 - qcom,kryo468 - qcom,kryo485 - qcom,kryo560 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml index 28ded09d72e3..e7720caf31b3 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml @@ -22,6 +22,7 @@ properties: - mediatek,mt7622-wed - mediatek,mt7981-wed - mediatek,mt7986-wed + - mediatek,mt7988-wed - const: syscon reg: diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml index 0c5381e081bd..cbb012e217ab 100644 --- a/Documentation/devicetree/bindings/arm/psci.yaml +++ b/Documentation/devicetree/bindings/arm/psci.yaml @@ -101,6 +101,7 @@ properties: patternProperties: "^power-domain-": $ref: /schemas/power/power-domain.yaml# + unevaluatedProperties: false type: object description: | diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml new file mode 100644 index 000000000000..c229e4f0c1d9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022-2023 Amlogic, Inc. All rights reserved +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,s4-peripherals-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic S4 Peripherals Clock Controller + +maintainers: + - Yu Tu <yu.tu@amlogic.com> + +properties: + compatible: + const: amlogic,s4-peripherals-clkc + + reg: + maxItems: 1 + + clocks: + minItems: 14 + items: + - description: input fixed pll div2 + - description: input fixed pll div2p5 + - description: input fixed pll div3 + - description: input fixed pll div4 + - description: input fixed pll div5 + - description: input fixed pll div7 + - description: input hifi pll + - description: input gp0 pll + - description: input mpll0 + - description: input mpll1 + - description: input mpll2 + - description: input mpll3 + - description: input hdmi pll + - description: input oscillator (usually at 24MHz) + - description: input external 32kHz reference (optional) + + clock-names: + minItems: 14 + items: + - const: fclk_div2 + - const: fclk_div2p5 + - const: fclk_div3 + - const: fclk_div4 + - const: fclk_div5 + - const: fclk_div7 + - const: hifi_pll + - const: gp0_pll + - const: mpll0 + - const: mpll1 + - const: mpll2 + - const: mpll3 + - const: hdmi_pll + - const: xtal + - const: ext_32k + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> + + clkc_periphs: clock-controller@fe000000 { + compatible = "amlogic,s4-peripherals-clkc"; + reg = <0xfe000000 0x49c>; + clocks = <&clkc_pll 3>, + <&clkc_pll 13>, + <&clkc_pll 5>, + <&clkc_pll 7>, + <&clkc_pll 9>, + <&clkc_pll 11>, + <&clkc_pll 17>, + <&clkc_pll 15>, + <&clkc_pll 25>, + <&clkc_pll 27>, + <&clkc_pll 29>, + <&clkc_pll 31>, + <&clkc_pll 20>, + <&xtal>; + clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", "fclk_div4", + "fclk_div5", "fclk_div7", "hifi_pll", "gp0_pll", + "mpll0", "mpll1", "mpll2", "mpll3", "hdmi_pll", "xtal"; + #clock-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml new file mode 100644 index 000000000000..d8932ec26ca8 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022-2023 Amlogic, Inc. All rights reserved +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic S4 PLL Clock Controller + +maintainers: + - Yu Tu <yu.tu@amlogic.com> + +properties: + compatible: + const: amlogic,s4-pll-clkc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: xtal + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + +additionalProperties: false + +examples: + - | + clkc_pll: clock-controller@fe008000 { + compatible = "amlogic,s4-pll-clkc"; + reg = <0xfe008000 0x1e8>; + clocks = <&xtal>; + clock-names = "xtal"; + #clock-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/qcom,hfpll.txt b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt index ec02a024424c..5769cbbe76be 100644 --- a/Documentation/devicetree/bindings/clock/qcom,hfpll.txt +++ b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt @@ -12,6 +12,9 @@ PROPERTIES "qcom,hfpll-apq8064", "qcom,hfpll" "qcom,hfpll-msm8974", "qcom,hfpll" "qcom,hfpll-msm8960", "qcom,hfpll" + "qcom,msm8976-hfpll-a53", "qcom,hfpll" + "qcom,msm8976-hfpll-a72", "qcom,hfpll" + "qcom,msm8976-hfpll-cci", "qcom,hfpll" - reg: Usage: required diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml index fd14d18309a8..4eb5e59f6772 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml @@ -28,6 +28,7 @@ properties: - qcom,sdx55-rpmh-clk - qcom,sdx65-rpmh-clk - qcom,sdx75-rpmh-clk + - qcom,sm4450-rpmh-clk - qcom,sm6350-rpmh-clk - qcom,sm8150-rpmh-clk - qcom,sm8250-rpmh-clk diff --git a/Documentation/devicetree/bindings/clock/qcom,sm4450-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm4450-gcc.yaml new file mode 100644 index 000000000000..5953c8d92436 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm4450-gcc.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm4450-gcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller on SM4450 + +maintainers: + - Ajit Pandey <quic_ajipan@quicinc.com> + - Taniya Das <quic_tdas@quicinc.com> + +description: | + Qualcomm global clock control module provides the clocks, resets and power + domains on SM4450 + + See also:: include/dt-bindings/clock/qcom,sm4450-gcc.h + +properties: + compatible: + const: qcom,sm4450-gcc + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + - description: UFS Phy Rx symbol 0 clock source + - description: UFS Phy Rx symbol 1 clock source + - description: UFS Phy Tx symbol 0 clock source + - description: USB3 Phy wrapper pipe clock source + +required: + - compatible + - clocks + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,sm4450-gcc"; + reg = <0x00100000 0x001f4200>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>, + <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, <&usb_1_qmpphy>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml index 8178c35bc348..dc3c18e4ead7 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml @@ -13,11 +13,15 @@ description: | Qualcomm camera clock control module provides the clocks, resets and power domains on SM8450. - See also:: include/dt-bindings/clock/qcom,sm8450-camcc.h + See also:: + include/dt-bindings/clock/qcom,sm8450-camcc.h + include/dt-bindings/clock/qcom,sm8550-camcc.h properties: compatible: - const: qcom,sm8450-camcc + enum: + - qcom,sm8450-camcc + - qcom,sm8550-camcc clocks: items: diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml index fe2fba18ae84..80a8c7114c31 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml @@ -27,6 +27,7 @@ properties: - renesas,r9a07g043-cpg # RZ/G2UL{Type-1,Type-2} and RZ/Five - renesas,r9a07g044-cpg # RZ/G2{L,LC} - renesas,r9a07g054-cpg # RZ/V2L + - renesas,r9a08g045-cpg # RZ/G3S - renesas,r9a09g011-cpg # RZ/V2M reg: diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml index c1d225fcf2d5..56fc71d6a081 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml @@ -23,6 +23,7 @@ properties: - enum: - qcom,qcm2290-cpufreq-hw - qcom,sc7180-cpufreq-hw + - qcom,sdm670-cpufreq-hw - qcom,sdm845-cpufreq-hw - qcom,sm6115-cpufreq-hw - qcom,sm6350-cpufreq-hw @@ -36,11 +37,13 @@ properties: - qcom,sa8775p-cpufreq-epss - qcom,sc7280-cpufreq-epss - qcom,sc8280xp-cpufreq-epss + - qcom,sdx75-cpufreq-epss - qcom,sm6375-cpufreq-epss - qcom,sm8250-cpufreq-epss - qcom,sm8350-cpufreq-epss - qcom,sm8450-cpufreq-epss - qcom,sm8550-cpufreq-epss + - qcom,sm8650-cpufreq-epss - const: qcom,cpufreq-epss reg: @@ -128,6 +131,7 @@ allOf: - qcom,qdu1000-cpufreq-epss - qcom,sc7180-cpufreq-hw - qcom,sc8280xp-cpufreq-epss + - qcom,sdm670-cpufreq-hw - qcom,sdm845-cpufreq-hw - qcom,sm6115-cpufreq-hw - qcom,sm6350-cpufreq-hw diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml index 7e1bb992ce90..547265b8b118 100644 --- a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml +++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml @@ -27,8 +27,12 @@ select: enum: - qcom,apq8064 - qcom,apq8096 + - qcom,ipq5332 + - qcom,ipq6018 - qcom,ipq8064 - qcom,ipq8074 + - qcom,ipq9574 + - qcom,msm8909 - qcom,msm8939 - qcom,msm8960 - qcom,msm8974 @@ -43,7 +47,9 @@ patternProperties: - if: properties: compatible: - const: operating-points-v2-kryo-cpu + enum: + - operating-points-v2-krait-cpu + - operating-points-v2-kryo-cpu then: $ref: /schemas/opp/opp-v2-kryo-cpu.yaml# diff --git a/Documentation/devicetree/bindings/devfreq/event/rockchip,dfi.yaml b/Documentation/devicetree/bindings/devfreq/event/rockchip,dfi.yaml new file mode 100644 index 000000000000..50d3fabe958d --- /dev/null +++ b/Documentation/devicetree/bindings/devfreq/event/rockchip,dfi.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/devfreq/event/rockchip,dfi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip DFI + +maintainers: + - Sascha Hauer <s.hauer@pengutronix.de> + +properties: + compatible: + enum: + - rockchip,rk3399-dfi + - rockchip,rk3568-dfi + - rockchip,rk3588-dfi + + clocks: + maxItems: 1 + + clock-names: + items: + - const: pclk_ddr_mon + + interrupts: + minItems: 1 + maxItems: 4 + + reg: + maxItems: 1 + + rockchip,pmu: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "PMU general register files". + +required: + - compatible + - interrupts + - reg + +if: + properties: + compatible: + contains: + enum: + - rockchip,rk3399-dfi + +then: + required: + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/rk3308-cru.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + dfi: dfi@ff630000 { + compatible = "rockchip,rk3399-dfi"; + reg = <0x00 0xff630000 0x00 0x4000>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>; + rockchip,pmu = <&pmugrf>; + clocks = <&cru PCLK_DDR_MON>; + clock-names = "pclk_ddr_mon"; + }; + }; diff --git a/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt b/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt deleted file mode 100644 index 148191b0fc15..000000000000 --- a/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt +++ /dev/null @@ -1,18 +0,0 @@ - -* Rockchip rk3399 DFI device - -Required properties: -- compatible: Must be "rockchip,rk3399-dfi". -- reg: physical base address of each DFI and length of memory mapped region -- rockchip,pmu: phandle to the syscon managing the "pmu general register files" -- clocks: phandles for clock specified in "clock-names" property -- clock-names : the name of clock used by the DFI, must be "pclk_ddr_mon"; - -Example: - dfi: dfi@ff630000 { - compatible = "rockchip,rk3399-dfi"; - reg = <0x00 0xff630000 0x00 0x4000>; - rockchip,pmu = <&pmugrf>; - clocks = <&cru PCLK_DDR_MON>; - clock-names = "pclk_ddr_mon"; - }; diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml index 1f8f2182e2f1..9cc1fd0751cd 100644 --- a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml +++ b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml @@ -50,10 +50,6 @@ examples: - | #include <dt-bindings/gpio/gpio.h> - backlight: backlight { - compatible = "gpio-backlight"; - gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; - }; spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml index 90e323e19edb..3cabbba86581 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml @@ -48,10 +48,6 @@ examples: - | #include <dt-bindings/gpio/gpio.h> - backlight: backlight { - compatible = "gpio-backlight"; - gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; - }; spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml new file mode 100644 index 000000000000..a5a596ff8e75 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-simple-lvds-dual-ports.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple LVDS panels with one power supply and dual LVDS ports + +maintainers: + - Liu Ying <victor.liu@nxp.com> + - Thierry Reding <thierry.reding@gmail.com> + - Sam Ravnborg <sam@ravnborg.org> + +description: | + This binding file is a collection of the LVDS panels that + has dual LVDS ports and requires only a single power-supply. + The first port receives odd pixels, and the second port receives even pixels. + There are optionally a backlight and an enable GPIO. + The panel may use an OF graph binding for the association to the display, + or it may be a direct child node of the display. + + If the panel is more advanced a dedicated binding file is required. + +allOf: + - $ref: panel-common.yaml# + +properties: + + compatible: + enum: + # compatible must be listed in alphabetical order, ordered by compatible. + # The description in the comment is mandatory for each compatible. + + # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel + - auo,g133han01 + # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel + - auo,g185han01 + # AU Optronics Corporation 19.0" (1280x1024) TFT LCD panel + - auo,g190ean01 + # Kaohsiung Opto-Electronics Inc. 10.1" WUXGA (1920 x 1200) LVDS TFT LCD panel + - koe,tx26d202vm0bwa + # NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel + - nlt,nl192108ac18-02d + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: The first sink port. + + properties: + dual-lvds-odd-pixels: + type: boolean + description: The first sink port for odd pixels. + + required: + - dual-lvds-odd-pixels + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: The second sink port. + + properties: + dual-lvds-even-pixels: + type: boolean + description: The second sink port for even pixels. + + required: + - dual-lvds-even-pixels + + required: + - port@0 + - port@1 + + backlight: true + enable-gpios: true + power-supply: true + +additionalProperties: false + +required: + - compatible + - ports + - power-supply + +examples: + - | + panel: panel-lvds { + compatible = "koe,tx26d202vm0bwa"; + power-supply = <&vdd_lcd_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + dual-lvds-odd-pixels; + reg = <0>; + + panel_lvds0_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@1 { + dual-lvds-even-pixels; + reg = <1>; + + panel_lvds1_in: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 81ac402ceed1..3ec9ee95045f 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -65,14 +65,8 @@ properties: - auo,g104sn02 # AU Optronics Corporation 12.1" (1280x800) TFT LCD panel - auo,g121ean01 - # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel - - auo,g133han01 # AU Optronics Corporation 15.6" (1366x768) TFT LCD panel - auo,g156xtn01 - # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel - - auo,g185han01 - # AU Optronics Corporation 19.0" (1280x1024) TFT LCD panel - - auo,g190ean01 # AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel - auo,p320hvn03 # AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel @@ -204,8 +198,6 @@ properties: - kingdisplay,kd116n21-30nv-a010 # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel - koe,tx14d24vm1bpa - # Kaohsiung Opto-Electronics Inc. 10.1" WUXGA (1920 x 1200) LVDS TFT LCD panel - - koe,tx26d202vm0bwa # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel - koe,tx31d200vm0baa # Kyocera Corporation 7" WVGA (800x480) transmissive color TFT @@ -256,8 +248,6 @@ properties: - neweast,wjfh116008a # Newhaven Display International 480 x 272 TFT LCD panel - newhaven,nhd-4.3-480272ef-atxl - # NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel - - nlt,nl192108ac18-02d # New Vision Display 7.0" 800 RGB x 480 TFT LCD panel - nvd,9128 # OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel diff --git a/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml b/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml index 621f27148419..3b0ebc0db8e0 100644 --- a/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml +++ b/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml @@ -54,11 +54,6 @@ examples: - | #include <dt-bindings/gpio/gpio.h> - backlight: backlight { - compatible = "gpio-backlight"; - gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; - }; - spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml index d0ca2af89f1e..918776d16ef3 100644 --- a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml @@ -19,10 +19,18 @@ properties: - fsl,imx35-gpio - fsl,imx7d-gpio - items: + - enum: + - fsl,imx27-gpio + - const: fsl,imx21-gpio + - items: - const: fsl,imx35-gpio - const: fsl,imx31-gpio - items: - enum: + - fsl,imx25-gpio + - const: fsl,imx35-gpio + - items: + - enum: - fsl,imx50-gpio - fsl,imx51-gpio - fsl,imx53-gpio diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml index 7c2d152e8617..a27f92950257 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml @@ -20,6 +20,7 @@ description: | properties: compatible: oneOf: + - const: fsl,imx8ulp-gpio - const: fsl,vf610-gpio - items: - const: fsl,imx7ulp-gpio @@ -27,16 +28,18 @@ properties: - items: - enum: - fsl,imx93-gpio - - fsl,imx8ulp-gpio - - const: fsl,imx7ulp-gpio + - fsl,imx95-gpio + - const: fsl,imx8ulp-gpio reg: - description: The first reg tuple represents the PORT module, the second tuple - represents the GPIO module. + minItems: 1 maxItems: 2 interrupts: - maxItems: 1 + items: + - description: GPIO Trustzone non-secure interrupt number + - description: GPIO Trustzone secure interrupt number + minItems: 1 interrupt-controller: true @@ -59,7 +62,8 @@ properties: - const: port gpio-ranges: - maxItems: 1 + minItems: 1 + maxItems: 4 patternProperties: "^.+-hog(-[0-9]+)?$": @@ -77,6 +81,30 @@ required: - "#gpio-cells" - gpio-controller +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,vf610-gpio + - fsl,imx7ulp-gpio + then: + properties: + interrupts: + maxItems: 1 + reg: + items: + - description: PORT register base address + - description: GPIO register base address + else: + properties: + interrupts: + minItems: 2 + reg: + items: + - description: GPIO register base address + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt deleted file mode 100644 index 8dc41ed99685..000000000000 --- a/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt +++ /dev/null @@ -1,38 +0,0 @@ -Intel IXP4xx XScale Networking Processors GPIO - -This GPIO controller is found in the Intel IXP4xx processors. -It supports 16 GPIO lines. - -The interrupt portions of the GPIO controller is hierarchical: -the synchronous edge detector is part of the GPIO block, but the -actual enabling/disabling of the interrupt line is done in the -main IXP4xx interrupt controller which has a 1:1 mapping for -the first 12 GPIO lines to 12 system interrupts. - -The remaining 4 GPIO lines can not be used for receiving -interrupts. - -The interrupt parent of this GPIO controller must be the -IXP4xx interrupt controller. - -Required properties: - -- compatible : Should be - "intel,ixp4xx-gpio" -- reg : Should contain registers location and length -- gpio-controller : marks this as a GPIO controller -- #gpio-cells : Should be 2, see gpio/gpio.txt -- interrupt-controller : marks this as an interrupt controller -- #interrupt-cells : a standard two-cell interrupt, see - interrupt-controller/interrupts.txt - -Example: - -gpio0: gpio@c8004000 { - compatible = "intel,ixp4xx-gpio"; - reg = <0xc8004000 0x1000>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; -}; diff --git a/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.yaml b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.yaml new file mode 100644 index 000000000000..bfcb1f364c3a --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/intel,ixp4xx-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel IXP4xx XScale Networking Processors GPIO Controller + +description: | + This GPIO controller is found in the Intel IXP4xx + processors. It supports 16 GPIO lines. + The interrupt portions of the GPIO controller is hierarchical. + The synchronous edge detector is part of the GPIO block, but the + actual enabling/disabling of the interrupt line is done in the + main IXP4xx interrupt controller which has a 1-to-1 mapping for + the first 12 GPIO lines to 12 system interrupts. + The remaining 4 GPIO lines can not be used for receiving + interrupts. + The interrupt parent of this GPIO controller must be the + IXP4xx interrupt controller. + GPIO 14 and 15 can be used as clock outputs rather than GPIO, + and this can be enabled by a special flag. + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +properties: + compatible: + const: intel,ixp4xx-gpio + + reg: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + intel,ixp4xx-gpio14-clkout: + description: If defined, enables clock output on GPIO 14 + instead of GPIO. + type: boolean + + intel,ixp4xx-gpio15-clkout: + description: If defined, enables clock output on GPIO 15 + instead of GPIO. + type: boolean + +required: + - compatible + - reg + - "#gpio-cells" + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + gpio@c8004000 { + compatible = "intel,ixp4xx-gpio"; + reg = <0xc8004000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml index fb86e8ce6349..cf3b1b270aa8 100644 --- a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml @@ -11,9 +11,22 @@ maintainers: properties: compatible: - enum: - - loongson,ls2k-gpio - - loongson,ls7a-gpio + oneOf: + - enum: + - loongson,ls2k-gpio + - loongson,ls2k0500-gpio0 + - loongson,ls2k0500-gpio1 + - loongson,ls2k2000-gpio0 + - loongson,ls2k2000-gpio1 + - loongson,ls2k2000-gpio2 + - loongson,ls3a5000-gpio + - loongson,ls7a-gpio + - items: + - const: loongson,ls2k1000-gpio + - const: loongson,ls2k-gpio + - items: + - const: loongson,ls7a1000-gpio + - const: loongson,ls7a-gpio reg: maxItems: 1 @@ -49,7 +62,7 @@ examples: #include <dt-bindings/interrupt-controller/irq.h> gpio0: gpio@1fe00500 { - compatible = "loongson,ls2k-gpio"; + compatible = "loongson,ls2k1000-gpio", "loongson,ls2k-gpio"; reg = <0x1fe00500 0x38>; ngpios = <64>; #gpio-cells = <2>; diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2991.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2991.yaml new file mode 100644 index 000000000000..011e5b65c79c --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2991.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/adi,ltc2991.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2991 Octal I2C Voltage, Current and Temperature Monitor + +maintainers: + - Antoniu Miclaus <antoniu.miclaus@analog.com> + +description: | + The LTC2991 is used to monitor system temperatures, voltages and currents. + Through the I2C serial interface, the eight monitors can individually measure + supply voltages and can be paired for differential measurements of current + sense resistors or temperature sensing transistors. + + Datasheet: + https://www.analog.com/en/products/ltc2991.html + +properties: + compatible: + const: adi,ltc2991 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + vcc-supply: true + +patternProperties: + "^channel@[0-3]$": + type: object + description: + Represents the differential/temperature channels. + + properties: + reg: + description: + The channel number. LTC2991 can monitor 4 currents/temperatures. + items: + minimum: 0 + maximum: 3 + + shunt-resistor-micro-ohms: + description: + The value of curent sense resistor in micro ohms. Pin configuration is + set for differential input pair. + + adi,temperature-enable: + description: + Enables temperature readings. Pin configuration is set for remote + diode temperature measurement. + type: boolean + + required: + - reg + + allOf: + - if: + required: + - shunt-resistor-micro-ohms + then: + properties: + adi,temperature-enable: false + + additionalProperties: false + +required: + - compatible + - reg + - vcc-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hwmon@48 { + compatible = "adi,ltc2991"; + reg = <0x48>; + vcc-supply = <&vcc>; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hwmon@48 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "adi,ltc2991"; + reg = <0x48>; + vcc-supply = <&vcc>; + + channel@0 { + reg = <0x0>; + shunt-resistor-micro-ohms = <100000>; + }; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <100000>; + }; + + channel@2 { + reg = <0x2>; + adi,temperature-enable; + }; + + channel@3 { + reg = <0x3>; + adi,temperature-enable; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml index 2dc8b07b4d3b..f60e06ab7d0a 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml @@ -32,6 +32,68 @@ properties: Must have values in the interval (1.6V; 3.6V) in order for the device to function correctly. + adi,comp-int: + description: + If present interrupt mode is used. If not present comparator mode is used + (default). + type: boolean + + adi,alarm-pol: + description: + Sets the alarms active state. + - 0 = active low + - 1 = active high + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + adi,fault-q: + description: + Select how many consecutive temperature faults must occur before + overtemperature or undertemperature faults are indicated in the + corresponding status bits. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] + + adi,timeout-enable: + description: + Enables timeout. Bus timeout resets the I2C-compatible interface when SCL + is low for more than 30ms (nominal). + type: boolean + +allOf: + - if: + properties: + compatible: + contains: + const: adi,max31829 + + then: + properties: + adi,alarm-pol: + default: 1 + + else: + properties: + adi,alarm-pol: + default: 0 + + - if: + properties: + compatible: + contains: + const: adi,max31827 + + then: + properties: + adi,fault-q: + default: 1 + + else: + properties: + adi,fault-q: + default: 4 + + required: - compatible - reg @@ -49,6 +111,10 @@ examples: compatible = "adi,max31827"; reg = <0x42>; vref-supply = <®_vdd>; + adi,comp-int; + adi,alarm-pol = <0>; + adi,fault-q = <1>; + adi,timeout-enable; }; }; ... diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt b/Documentation/devicetree/bindings/hwmon/ina3221.txt deleted file mode 100644 index fa63b6171407..000000000000 --- a/Documentation/devicetree/bindings/hwmon/ina3221.txt +++ /dev/null @@ -1,54 +0,0 @@ -Texas Instruments INA3221 Device Tree Bindings - -1) ina3221 node - Required properties: - - compatible: Must be "ti,ina3221" - - reg: I2C address - - Optional properties: - - ti,single-shot: This chip has two power modes: single-shot (chip takes one - measurement and then shuts itself down) and continuous ( - chip takes continuous measurements). The continuous mode is - more reliable and suitable for hardware monitor type device, - but the single-shot mode is more power-friendly and useful - for battery-powered device which cares power consumptions - while still needs some measurements occasionally. - If this property is present, the single-shot mode will be - used, instead of the default continuous one for monitoring. - - = The node contains optional child nodes for three channels = - = Each child node describes the information of input source = - - - #address-cells: Required only if a child node is present. Must be 1. - - #size-cells: Required only if a child node is present. Must be 0. - -2) child nodes - Required properties: - - reg: Must be 0, 1 or 2, corresponding to IN1, IN2 or IN3 port of INA3221 - - Optional properties: - - label: Name of the input source - - shunt-resistor-micro-ohms: Shunt resistor value in micro-Ohm - -Example: - -ina3221@40 { - compatible = "ti,ina3221"; - reg = <0x40>; - #address-cells = <1>; - #size-cells = <0>; - - input@0 { - reg = <0x0>; - status = "disabled"; - }; - input@1 { - reg = <0x1>; - shunt-resistor-micro-ohms = <5000>; - }; - input@2 { - reg = <0x2>; - label = "VDD_5V"; - shunt-resistor-micro-ohms = <5000>; - }; -}; diff --git a/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt index 8523777f560c..18095ba87a5a 100644 --- a/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt +++ b/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt @@ -1,12 +1,16 @@ -Nuvoton NPCM7xx PWM and Fan Tacho controller device +Nuvoton NPCM PWM and Fan Tacho controller device The Nuvoton BMC NPCM7XX supports 8 Pulse-width modulation (PWM) controller outputs and 16 Fan tachometer controller inputs. +The Nuvoton BMC NPCM8XX supports 12 Pulse-width modulation (PWM) +controller outputs and 16 Fan tachometer controller inputs. + Required properties for pwm-fan node - #address-cells : should be 1. - #size-cells : should be 0. - compatible : "nuvoton,npcm750-pwm-fan" for Poleg NPCM7XX. + : "nuvoton,npcm845-pwm-fan" for Arbel NPCM8XX. - reg : specifies physical base address and size of the registers. - reg-names : must contain: * "pwm" for the PWM registers. diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml new file mode 100644 index 000000000000..ded1c115764b --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/pmbus/infineon,tda38640.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Infineon TDA38640 Synchronous Buck Regulator with SVID and I2C + +maintainers: + - Naresh Solanki <naresh.solanki@9elements.com> + +description: | + The Infineon TDA38640 is a 40A Single-voltage Synchronous Buck + Regulator with SVID and I2C designed for Industrial use. + + Datasheet: https://www.infineon.com/dgdl/Infineon-TDA38640-0000-DataSheet-v02_04-EN.pdf?fileId=8ac78c8c80027ecd018042f2337f00c9 + +properties: + compatible: + enum: + - infineon,tda38640 + + reg: + maxItems: 1 + + infineon,en-pin-fixed-level: + description: + Indicates that the chip EN pin is at fixed level or left + unconnected(has internal pull-down). + type: boolean + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tda38640@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml index 8648877d2d01..378d1f6aeeb3 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml @@ -26,6 +26,7 @@ properties: - ti,ina226 - ti,ina230 - ti,ina231 + - ti,ina237 - ti,ina238 reg: diff --git a/Documentation/devicetree/bindings/hwmon/ti,ina3221.yaml b/Documentation/devicetree/bindings/hwmon/ti,ina3221.yaml new file mode 100644 index 000000000000..5f10f1207d69 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,ina3221.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ti,ina3221.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments INA3221 Current and Voltage Monitor + +maintainers: + - Jean Delvare <jdelvare@suse.com> + - Guenter Roeck <linux@roeck-us.net> + +properties: + compatible: + const: ti,ina3221 + + reg: + maxItems: 1 + + ti,single-shot: + description: | + This chip has two power modes: single-shot (chip takes one measurement + and then shuts itself down) and continuous (chip takes continuous + measurements). The continuous mode is more reliable and suitable for + hardware monitor type device, but the single-shot mode is more power- + friendly and useful for battery-powered device which cares power + consumptions while still needs some measurements occasionally. + + If this property is present, the single-shot mode will be used, instead + of the default continuous one for monitoring. + $ref: /schemas/types.yaml#/definitions/flag + + "#address-cells": + description: Required only if a child node is present. + const: 1 + + "#size-cells": + description: Required only if a child node is present. + const: 0 + +patternProperties: + "^input@[0-2]$": + description: The node contains optional child nodes for three channels. + Each child node describes the information of input source. Input channels + default to enabled in the chip. Unless channels are explicitly disabled + in device-tree, input channels will be enabled. + type: object + additionalProperties: false + properties: + reg: + description: Must be 0, 1 and 2, corresponding to the IN1, IN2 or IN3 + ports of the INA3221, respectively. + enum: [ 0, 1, 2 ] + + label: + description: name of the input source + + shunt-resistor-micro-ohms: + description: shunt resistor value in micro-Ohm + + ti,summation-disable: + description: | + The INA3221 has a critical alert pin that can be controlled by the + summation control function. This function adds the single + shunt-voltage conversions for the desired channels in order to + compare the combined sum to the programmed limit. The Shunt-Voltage + Sum Limit register contains the programmed value that is compared + to the value in the Shunt-Voltage Sum register in order to + determine if the total summed limit is exceeded. If the + shunt-voltage sum limit value is exceeded, the critical alert pin + is asserted. + + For the summation limit to have a meaningful value, it is necessary + to use the same shunt-resistor value on all enabled channels. If + this is not the case or if a channel should not be used for + triggering the critical alert pin, then this property can be used + exclude specific channels from the summation control function. + type: boolean + + required: + - reg + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + power-sensor@40 { + compatible = "ti,ina3221"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + /* + * Input channels are enabled by default in the device and so + * to disable, must be explicitly disabled in device-tree. + */ + status = "disabled"; + }; + + input@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <5000>; + }; + + input@2 { + reg = <0x2>; + label = "VDD_5V"; + shunt-resistor-micro-ohms = <5000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i3c/i3c.yaml b/Documentation/devicetree/bindings/i3c/i3c.yaml index ab69f4115de4..d9483fbd2454 100644 --- a/Documentation/devicetree/bindings/i3c/i3c.yaml +++ b/Documentation/devicetree/bindings/i3c/i3c.yaml @@ -55,6 +55,12 @@ properties: May not be supported by all controllers. + mctp-controller: + type: boolean + description: | + Indicates that the system is accessible via this bus as an endpoint for + MCTP over I3C transport. + required: - "#address-cells" - "#size-cells" diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml index 2594fa192f93..2a04906531fb 100644 --- a/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml +++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml @@ -32,7 +32,8 @@ properties: spi-cpol: true - reset-gpios: true + reset-gpios: + maxItems: 1 interrupts: minItems: 1 diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml index 4e508bfcc9d8..5121685337b5 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml @@ -78,7 +78,8 @@ properties: - const: -1000 - const: 22000 - reset-gpios: true + reset-gpios: + maxItems: 1 adi,dc-dc-ilim-microamp: enum: [150000, 200000, 250000, 300000, 350000, 400000] diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml index b9b5beac33b2..5b6cde86b5a5 100644 --- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml @@ -23,7 +23,8 @@ properties: maxItems: 1 description: Connected to ADC_RDY pin. - reset-gpios: true + reset-gpios: + maxItems: 1 required: - compatible diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml index 2958c4ca75b4..167d10bd60af 100644 --- a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml @@ -23,7 +23,8 @@ properties: maxItems: 1 description: Connected to ADC_RDY pin. - reset-gpios: true + reset-gpios: + maxItems: 1 additionalProperties: false diff --git a/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml b/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml new file mode 100644 index 000000000000..88764adcd696 --- /dev/null +++ b/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/qcom,pm8921-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PM8921 PMIC KeyPad + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +allOf: + - $ref: input.yaml# + - $ref: matrix-keymap.yaml# + +properties: + compatible: + enum: + - qcom,pm8058-keypad + - qcom,pm8921-keypad + + reg: + maxItems: 1 + + interrupts: + items: + - description: key sense + - description: key stuck + + wakeup-source: + type: boolean + description: use any event on keypad as wakeup event + + linux,keypad-wakeup: + type: boolean + deprecated: true + description: legacy version of the wakeup-source property + + debounce: + description: + Time in microseconds that key must be pressed or + released for state change interrupt to trigger. + $ref: /schemas/types.yaml#/definitions/uint32 + + scan-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: time in microseconds to pause between successive scans of the + matrix array + + row-hold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: time in nanoseconds to pause between scans of each row in the + matrix array. + +required: + - compatible + - reg + - interrupts + - linux,keymap + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + #address-cells = <1>; + #size-cells = <0>; + + keypad@148 { + compatible = "qcom,pm8921-keypad"; + reg = <0x148>; + interrupt-parent = <&pmicintc>; + interrupts = <74 IRQ_TYPE_EDGE_RISING>, <75 IRQ_TYPE_EDGE_RISING>; + linux,keymap = < + MATRIX_KEY(0, 0, KEY_VOLUMEUP) + MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) + MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) + MATRIX_KEY(0, 3, KEY_CAMERA) + >; + keypad,num-rows = <1>; + keypad,num-columns = <5>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt deleted file mode 100644 index 4a9dc6ba96b1..000000000000 --- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt +++ /dev/null @@ -1,90 +0,0 @@ -Qualcomm PM8xxx PMIC Keypad - -PROPERTIES - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,pm8058-keypad" - "qcom,pm8921-keypad" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: address of keypad control register - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: the first interrupt specifies the key sense interrupt - and the second interrupt specifies the key stuck interrupt. - The format of the specifier is defined by the binding - document describing the node's interrupt parent. - -- linux,keymap: - Usage: required - Value type: <prop-encoded-array> - Definition: the linux keymap. More information can be found in - input/matrix-keymap.txt. - -- linux,keypad-no-autorepeat: - Usage: optional - Value type: <bool> - Definition: don't enable autorepeat feature. - -- wakeup-source: - Usage: optional - Value type: <bool> - Definition: use any event on keypad as wakeup event. - (Legacy property supported: "linux,keypad-wakeup") - -- keypad,num-rows: - Usage: required - Value type: <u32> - Definition: number of rows in the keymap. More information can be found - in input/matrix-keymap.txt. - -- keypad,num-columns: - Usage: required - Value type: <u32> - Definition: number of columns in the keymap. More information can be - found in input/matrix-keymap.txt. - -- debounce: - Usage: optional - Value type: <u32> - Definition: time in microseconds that key must be pressed or release - for key sense interrupt to trigger. - -- scan-delay: - Usage: optional - Value type: <u32> - Definition: time in microseconds to pause between successive scans - of the matrix array. - -- row-hold: - Usage: optional - Value type: <u32> - Definition: time in nanoseconds to pause between scans of each row in - the matrix array. - -EXAMPLE - - keypad@148 { - compatible = "qcom,pm8921-keypad"; - reg = <0x148>; - interrupt-parent = <&pmicintc>; - interrupts = <74 1>, <75 1>; - linux,keymap = < - MATRIX_KEY(0, 0, KEY_VOLUMEUP) - MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) - MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) - MATRIX_KEY(0, 3, KEY_CAMERA) - >; - keypad,num-rows = <1>; - keypad,num-columns = <5>; - debounce = <15>; - scan-delay = <32>; - row-hold = <91500>; - }; diff --git a/Documentation/devicetree/bindings/input/syna,rmi4.yaml b/Documentation/devicetree/bindings/input/syna,rmi4.yaml index 4d4e1a8e36be..b522c8d3ce0d 100644 --- a/Documentation/devicetree/bindings/input/syna,rmi4.yaml +++ b/Documentation/devicetree/bindings/input/syna,rmi4.yaml @@ -164,6 +164,8 @@ patternProperties: "^rmi4-f[0-9a-f]+@[0-9a-f]+$": type: object + additionalProperties: true + description: Other functions, not documented yet. diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml index 4847b04be1a1..86d61896f591 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml @@ -35,6 +35,7 @@ properties: - qcom,sdm845-pdc - qcom,sdx55-pdc - qcom,sdx65-pdc + - qcom,sm4450-pdc - qcom,sm6350-pdc - qcom,sm8150-pdc - qcom,sm8250-pdc diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml index 289737721c2c..0b71e6f911a8 100644 --- a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml @@ -69,6 +69,7 @@ properties: maxItems: 1 i2c-alias: + $ref: /schemas/types.yaml#/definitions/uint32 description: The I2C address used for the serializer. Transactions to this address on the I2C bus where the deserializer resides are diff --git a/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml index 4e4af3cfc0fe..1f58ee99be28 100644 --- a/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml @@ -18,7 +18,7 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: Node to get DDR loading. Refer to - Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt. + Documentation/devicetree/bindings/devfreq/event/rockchip,dfi.yaml. clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/memory-controllers/xlnx,versal-ddrmc-edac.yaml b/Documentation/devicetree/bindings/memory-controllers/xlnx,versal-ddrmc-edac.yaml new file mode 100644 index 000000000000..12f8e9f350bc --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/xlnx,versal-ddrmc-edac.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/xlnx,versal-ddrmc-edac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Versal DDRMC (Integrated DDR Memory Controller) + +maintainers: + - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> + - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com> + +description: + The integrated DDR Memory Controllers (DDRMCs) support both DDR4 and LPDDR4/ + 4X memory interfaces. Versal DDR memory controller has an optional ECC support + which correct single bit ECC errors and detect double bit ECC errors. + +properties: + compatible: + const: xlnx,versal-ddrmc + + reg: + items: + - description: DDR Memory Controller registers + - description: NOC registers corresponding to DDR Memory Controller + + reg-names: + items: + - const: base + - const: noc + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + memory-controller@f6150000 { + compatible = "xlnx,versal-ddrmc"; + reg = <0x0 0xf6150000 0x0 0x2000>, <0x0 0xf6070000 0x0 0x20000>; + reg-names = "base", "noc"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 8103154bbb52..c77d7b155a4c 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -49,6 +49,8 @@ properties: - hisilicon,peri-subctrl - hpe,gxp-sysreg - intel,lgm-syscon + - loongson,ls1b-syscon + - loongson,ls1c-syscon - marvell,armada-3700-usb2-host-misc - mediatek,mt8135-pctl-a-syscfg - mediatek,mt8135-pctl-b-syscfg diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index 4bfac9186886..7fe0352dff0f 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -158,6 +158,8 @@ allOf: patternProperties: "^ethernet-phy@[0-9a-f]$": type: object + $ref: ethernet-phy.yaml# + unevaluatedProperties: false description: Integrated PHY node diff --git a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml index aa3162c74833..75d8138298fb 100644 --- a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml +++ b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml @@ -53,7 +53,7 @@ properties: const: 0 patternProperties: - "^port@[0-9]+$": + "^port@[0-9a-f]+$": type: object $ref: ethernet-controller.yaml# diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml index b06c416893ff..f21bdd0f408d 100644 --- a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml +++ b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml @@ -78,6 +78,7 @@ properties: ports: type: object + additionalProperties: true patternProperties: '^port@[0-9a-f]$': diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index ec74a660beda..6107189d276a 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -40,17 +40,8 @@ $defs: patternProperties: "^(ethernet-)?ports$": - type: object - additionalProperties: false - - properties: - '#address-cells': - const: 1 - '#size-cells': - const: 0 - patternProperties: - "^(ethernet-)?port@[0-9]+$": + "^(ethernet-)?port@[0-9a-f]+$": description: Ethernet switch ports $ref: dsa-port.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml index e532c6b795f4..1c2444121e60 100644 --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml @@ -60,7 +60,7 @@ description: | Check out example 6. - - Port 5 can be wired to an external phy. Port 5 becomes a DSA slave. + - Port 5 can be wired to an external phy. Port 5 becomes a DSA user port. For the multi-chip module MT7530, the external phy must be wired TX to TX to gmac1 of the SoC for this to work. Ubiquiti EdgeRouter X SFP is wired @@ -154,10 +154,12 @@ properties: patternProperties: "^(ethernet-)?ports$": type: object + additionalProperties: true patternProperties: - "^(ethernet-)?port@[0-9]+$": + "^(ethernet-)?port@[0-6]$": type: object + additionalProperties: true properties: reg: @@ -184,7 +186,7 @@ $defs: patternProperties: "^(ethernet-)?ports$": patternProperties: - "^(ethernet-)?port@[0-9]+$": + "^(ethernet-)?port@[0-6]$": if: required: [ ethernet ] then: @@ -210,7 +212,7 @@ $defs: patternProperties: "^(ethernet-)?ports$": patternProperties: - "^(ethernet-)?port@[0-9]+$": + "^(ethernet-)?port@[0-6]$": if: required: [ ethernet ] then: diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml index 03b5567be389..b3029c64d0d5 100644 --- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml @@ -38,6 +38,8 @@ properties: Should be a gpio specifier for a reset line. maxItems: 1 + wakeup-source: true + microchip,synclko-125: $ref: /schemas/types.yaml#/definitions/flag description: @@ -49,6 +51,26 @@ properties: Set if the output SYNCLKO clock should be disabled. Do not mix with microchip,synclko-125. + microchip,io-drive-strength-microamp: + description: + IO Pad Drive Strength + enum: [8000, 16000] + default: 16000 + + microchip,hi-drive-strength-microamp: + description: + High Speed Drive Strength. Controls drive strength of GMII / RGMII / + MII / RMII (except TX_CLK/REFCLKI, COL and CRS) and CLKO_25_125 lines. + enum: [2000, 4000, 8000, 12000, 16000, 20000, 24000, 28000] + default: 24000 + + microchip,lo-drive-strength-microamp: + description: + Low Speed Drive Strength. Controls drive strength of TX_CLK / REFCLKI, + COL, CRS, LEDs, PME_N, NTRP_N, SDO and SDI/SDA/MDIO lines. + enum: [2000, 4000, 8000, 12000, 16000, 20000, 24000, 28000] + default: 8000 + interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml index 8d7e878b84dc..9973d64f15a7 100644 --- a/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml +++ b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml @@ -37,8 +37,9 @@ properties: patternProperties: "^(ethernet-)?ports$": + additionalProperties: true patternProperties: - "^(ethernet-)?port@[0-9]+$": + "^(ethernet-)?port@[0-7]$": allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml index 4d5f5cc6d031..9432565f4f5d 100644 --- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml +++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml @@ -43,6 +43,7 @@ properties: # PHY 1. mdios: type: object + additionalProperties: false properties: '#address-cells': @@ -74,8 +75,9 @@ properties: patternProperties: "^(ethernet-)?ports$": + additionalProperties: true patternProperties: - "^(ethernet-)?port@[0-9]+$": + "^(ethernet-)?port@[0-9]$": allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml index df64eebebe18..167398ab253a 100644 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml @@ -73,6 +73,7 @@ $ref: dsa.yaml# patternProperties: "^(ethernet-)?ports$": type: object + additionalProperties: true patternProperties: "^(ethernet-)?port@[0-6]$": type: object diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml index cfd69c2604ea..cce692f57b08 100644 --- a/Documentation/devicetree/bindings/net/dsa/realtek.yaml +++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml @@ -68,6 +68,8 @@ properties: interrupt-controller: type: object + additionalProperties: false + description: | This defines an interrupt controller with an IRQ line (typically a GPIO) that will demultiplex and handle the interrupt from the single diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml index 833d2f68daa1..ea285ef3e64f 100644 --- a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml +++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml @@ -61,17 +61,11 @@ properties: ethernet-ports: type: object - properties: - '#address-cells': - const: 1 - '#size-cells': - const: 0 - + additionalProperties: true patternProperties: "^(ethernet-)?port@[0-4]$": type: object - description: Ethernet switch ports - + additionalProperties: true properties: pcs-handle: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/engleder,tsnep.yaml b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml index 82a5d7927ca4..34fd24ff6a71 100644 --- a/Documentation/devicetree/bindings/net/engleder,tsnep.yaml +++ b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml @@ -63,6 +63,7 @@ properties: mdio: type: object $ref: mdio.yaml# + unevaluatedProperties: false description: optional node for embedded MDIO controller required: diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml index f1b9075dc7fb..72ac67ca3415 100644 --- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml @@ -36,7 +36,7 @@ patternProperties: const: 0 patternProperties: - "^(ethernet-)?port@[0-9]+$": + "^(ethernet-)?port@[0-9a-f]+$": type: object description: Ethernet switch ports @@ -53,14 +53,16 @@ oneOf: additionalProperties: true $defs: - base: + ethernet-ports: description: An ethernet switch without any extra port properties $ref: '#' patternProperties: - "^(ethernet-)?port@[0-9]+$": - description: Ethernet switch ports - $ref: ethernet-switch-port.yaml# - unevaluatedProperties: false + "^(ethernet-)?ports$": + patternProperties: + "^(ethernet-)?port@[0-9a-f]+$": + description: Ethernet switch ports + $ref: ethernet-switch-port.yaml# + unevaluatedProperties: false ... diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml index b494e009326e..8948a11c994e 100644 --- a/Documentation/devicetree/bindings/net/fsl,fec.yaml +++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml @@ -59,6 +59,7 @@ properties: - const: fsl,imx6sx-fec - items: - enum: + - fsl,imx8dxl-fec - fsl,imx8qxp-fec - const: fsl,imx8qm-fec - const: fsl,imx6sx-fec diff --git a/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml b/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml new file mode 100644 index 000000000000..c4f3224bad38 --- /dev/null +++ b/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/loongson,ls1b-gmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-1B Gigabit Ethernet MAC Controller + +maintainers: + - Keguang Zhang <keguang.zhang@gmail.com> + +description: | + Loongson-1B Gigabit Ethernet MAC Controller is based on + Synopsys DesignWare MAC (version 3.50a). + + Main features + - Dual 10/100/1000Mbps GMAC controllers + - Full-duplex operation (IEEE 802.3x flow control automatic transmission) + - Half-duplex operation (CSMA/CD Protocol and back-pressure support) + - RX Checksum Offload + - TX Checksum insertion + - MII interface + - RGMII interface + +select: + properties: + compatible: + contains: + enum: + - loongson,ls1b-gmac + required: + - compatible + +properties: + compatible: + items: + - enum: + - loongson,ls1b-gmac + - const: snps,dwmac-3.50a + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: stmmaceth + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: macirq + + loongson,ls1-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon containing some extra configurations + including PHY interface mode. + + phy-mode: + enum: + - mii + - rgmii-id + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + - loongson,ls1-syscon + +allOf: + - $ref: snps,dwmac.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/loongson,ls1x-clk.h> + #include <dt-bindings/interrupt-controller/irq.h> + + gmac0: ethernet@1fe10000 { + compatible = "loongson,ls1b-gmac", "snps,dwmac-3.50a"; + reg = <0x1fe10000 0x10000>; + + clocks = <&clkc LS1X_CLKID_AHB>; + clock-names = "stmmaceth"; + + interrupt-parent = <&intc1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + + loongson,ls1-syscon = <&syscon>; + + phy-handle = <&phy0>; + phy-mode = "mii"; + snps,pbl = <1>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml b/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml new file mode 100644 index 000000000000..99001b940b83 --- /dev/null +++ b/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/loongson,ls1c-emac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-1C Ethernet MAC Controller + +maintainers: + - Keguang Zhang <keguang.zhang@gmail.com> + +description: | + Loongson-1C Ethernet MAC Controller is based on + Synopsys DesignWare MAC (version 3.50a). + + Main features + - 10/100Mbps + - Full-duplex operation (IEEE 802.3x flow control automatic transmission) + - Half-duplex operation (CSMA/CD Protocol and back-pressure support) + - IEEE 802.1Q VLAN tag detection for reception frames + - MII interface + - RMII interface + +select: + properties: + compatible: + contains: + enum: + - loongson,ls1c-emac + required: + - compatible + +properties: + compatible: + items: + - enum: + - loongson,ls1c-emac + - const: snps,dwmac-3.50a + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: stmmaceth + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: macirq + + loongson,ls1-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon containing some extra configurations + including PHY interface mode. + + phy-mode: + enum: + - mii + - rmii + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + - loongson,ls1-syscon + +allOf: + - $ref: snps,dwmac.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/loongson,ls1x-clk.h> + #include <dt-bindings/interrupt-controller/irq.h> + + emac: ethernet@1fe10000 { + compatible = "loongson,ls1c-emac", "snps,dwmac-3.50a"; + reg = <0x1fe10000 0x10000>; + + clocks = <&clkc LS1X_CLKID_AHB>; + clock-names = "stmmaceth"; + + interrupt-parent = <&intc1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + + loongson,ls1-syscon = <&syscon>; + + phy-handle = <&phy0>; + phy-mode = "mii"; + snps,pbl = <1>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@13 { + reg = <0x13>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml index 77c9bbf987e1..accff93d38f8 100644 --- a/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml +++ b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml @@ -44,6 +44,8 @@ properties: local-mac-address: true mac-address: true + nvmem-cells: true + nvmem-cell-names: true required: - compatible diff --git a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml index 8ee2c7d7ff42..86a9c3fc76c8 100644 --- a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml +++ b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml @@ -24,7 +24,7 @@ allOf: compatible: const: mscc,vsc7514-switch then: - $ref: ethernet-switch.yaml# + $ref: ethernet-switch.yaml#/$defs/ethernet-ports required: - interrupts - interrupt-names @@ -33,28 +33,18 @@ allOf: minItems: 21 reg-names: minItems: 21 - ethernet-ports: - patternProperties: - "^port@[0-9a-f]+$": - $ref: ethernet-switch-port.yaml# - unevaluatedProperties: false - if: properties: compatible: const: mscc,vsc7512-switch then: - $ref: /schemas/net/dsa/dsa.yaml# + $ref: /schemas/net/dsa/dsa.yaml#/$defs/ethernet-ports properties: reg: maxItems: 20 reg-names: maxItems: 20 - ethernet-ports: - patternProperties: - "^port@[0-9a-f]+$": - $ref: /schemas/net/dsa/dsa-port.yaml# - unevaluatedProperties: false properties: compatible: @@ -185,7 +175,7 @@ examples: }; # VSC7512 (DSA) - | - ethernet-switch@1{ + ethernet-switch@1 { compatible = "mscc,vsc7512-switch"; reg = <0x71010000 0x10000>, <0x71030000 0x10000>, @@ -212,22 +202,22 @@ examples: "port7", "port8", "port9", "port10", "qsys", "ana", "s0", "s1", "s2"; - ethernet-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - ethernet = <&mac_sw>; - phy-handle = <&phy0>; - phy-mode = "internal"; - }; - port@1 { - reg = <1>; - phy-handle = <&phy1>; - phy-mode = "internal"; - }; + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ethernet = <&mac_sw>; + phy-handle = <&phy0>; + phy-mode = "internal"; + }; + port@1 { + reg = <1>; + phy-handle = <&phy1>; + phy-mode = "internal"; }; }; + }; ... diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml index ab8867e6939b..85bfa45f5122 100644 --- a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml +++ b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml @@ -20,6 +20,7 @@ allOf: patternProperties: "^ethernet-phy@[0-9a-f]+$": type: object + additionalProperties: false description: | Some packages have multiple PHYs. Secondary PHY should be defines as subnode of the first (parent) PHY. diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml index 06b38c9bc6ec..29355ab98569 100644 --- a/Documentation/devicetree/bindings/net/renesas,ether.yaml +++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml @@ -81,9 +81,8 @@ properties: active-high patternProperties: - "^ethernet-phy@[0-9a-f]$": + "@[0-9a-f]$": type: object - $ref: ethernet-phy.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml index 3f41294f5997..5d074f27d462 100644 --- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml @@ -109,9 +109,8 @@ properties: enum: [0, 2000] patternProperties: - "^ethernet-phy@[0-9a-f]$": + "@[0-9a-f]$": type: object - $ref: ethernet-phy.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index ddf9522a5dc2..5c2769dc689a 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -394,6 +394,11 @@ properties: When a PFC frame is received with priorities matching the bitmask, the queue is blocked from transmitting for the pause time specified in the PFC frame. + + snps,coe-unsupported: + type: boolean + description: TX checksum offload is unsupported by the TX queue. + allOf: - if: required: diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index b04ac4966608..f07ae3173b03 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -86,7 +86,7 @@ properties: const: 0 patternProperties: - "^port@[0-9]+$": + "^port@[12]$": type: object description: CPSW external ports diff --git a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml index 311c570165f9..229c8f32019f 100644 --- a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml +++ b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml @@ -19,6 +19,7 @@ allOf: properties: compatible: enum: + - ti,am642-icssg-prueth # for AM64x SoC family - ti,am654-icssg-prueth # for AM65x SoC family sram: @@ -106,6 +107,13 @@ properties: phandle to system controller node and register offset to ICSSG control register for RGMII transmit delay + ti,half-duplex-capable: + type: boolean + description: + Indicates that the PHY output pin COL is routed to ICSSG GPIO pin + (PRGx_PRU0/1_GPIO10) as input so that the ICSSG MII port is + capable of half duplex operations. + required: - reg anyOf: diff --git a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml index bbbad31ae4ca..fd04d060c1de 100644 --- a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml +++ b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml @@ -26,7 +26,9 @@ description: | properties: compatible: - const: operating-points-v2-kryo-cpu + enum: + - operating-points-v2-krait-cpu + - operating-points-v2-kryo-cpu nvmem-cells: description: | @@ -47,6 +49,8 @@ patternProperties: opp-microvolt: true + opp-peak-kBps: true + opp-supported-hw: description: | A single 32 bit bitmap value, representing compatible HW. @@ -63,14 +67,22 @@ patternProperties: 5: MSM8996SG, speedbin 1 6: MSM8996SG, speedbin 2 7-31: unused - enum: [0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, - 0x9, 0xd, 0xe, 0xf, - 0x10, 0x20, 0x30, 0x70] + + Bitmap for IPQ806x SoC: + 0: IPQ8062 + 1: IPQ8064/IPQ8066/IPQ8068 + 2: IPQ8065/IPQ8069 + 3-31: unused + + Other platforms use bits directly corresponding to speedbin index. clock-latency-ns: true required-opps: true + patternProperties: + '^opp-microvolt-speed[0-9]+-pvs[0-9]+$': true + required: - opp-hz @@ -256,6 +268,22 @@ examples: }; }; + /* Dummy opp table to give example for named opp-microvolt */ + opp-table-2 { + compatible = "operating-points-v2-krait-cpu"; + nvmem-cells = <&speedbin_efuse>; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + opp-microvolt-speed0-pvs0 = <1000000 950000 1050000>; + opp-microvolt-speed0-pvs1 = <925000 878750 971250>; + opp-microvolt-speed0-pvs2 = <875000 831250 918750>; + opp-microvolt-speed0-pvs3 = <800000 760000 840000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <100000>; + }; + }; + smem { compatible = "qcom,smem"; memory-region = <&smem_mem>; diff --git a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml index b54ec003a1e0..a4b437fce37c 100644 --- a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml +++ b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml @@ -18,6 +18,9 @@ description: > Finally the operating system assumes the power off failed if the system is still running after waiting some time (timeout-ms). +allOf: + - $ref: restart-handler.yaml# + properties: compatible: const: gpio-poweroff @@ -40,6 +43,9 @@ properties: default: 100 description: Delay to wait after driving gpio inactive + priority: + default: 0 + timeout-ms: default: 3000 description: Time to wait before assuming the power off sequence failed. diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml index 3412fe7e1e80..d342b113fca2 100644 --- a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml +++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml @@ -15,6 +15,9 @@ description: |+ defined by the register map pointed by syscon reference plus the offset with the value and mask defined in the poweroff node. Default will be little endian mode, 32 bit access only. + The SYSCON register map is normally retrieved from the parental dt-node. So + the SYSCON poweroff node should be represented as a sub-node of a "syscon", + "simple-mfd" node. properties: compatible: @@ -30,7 +33,10 @@ properties: regmap: $ref: /schemas/types.yaml#/definitions/phandle - description: Phandle to the register map node. + deprecated: true + description: + Phandle to the register map node. This property is deprecated in favor of + the syscon-poweroff node being a child of a system controller node. value: $ref: /schemas/types.yaml#/definitions/uint32 @@ -38,7 +44,6 @@ properties: required: - compatible - - regmap - offset additionalProperties: false @@ -56,7 +61,6 @@ examples: - | poweroff { compatible = "syscon-poweroff"; - regmap = <®mapnode>; offset = <0x0>; mask = <0x7a>; }; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml index 2627cd3eed83..377cbb2c2c1f 100644 --- a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml @@ -55,6 +55,14 @@ properties: interrupts: maxItems: 1 + io-channels: + items: + - description: battery temperature + + io-channel-names: + items: + - const: temp + wakeup-source: type: boolean description: | @@ -95,3 +103,26 @@ examples: wakeup-source; }; }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + fuel-gauge@36 { + compatible = "maxim,max17043"; + reg = <0x36>; + + interrupt-parent = <&gpio>; + interrupts = <144 IRQ_TYPE_EDGE_FALLING>; + + monitored-battery = <&battery>; + power-supplies = <&charger>; + + io-channels = <&adc 8>; + io-channel-names = "temp"; + + maxim,alert-low-soc-level = <10>; + wakeup-source; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/mitsumi,mm8013.yaml b/Documentation/devicetree/bindings/power/supply/mitsumi,mm8013.yaml new file mode 100644 index 000000000000..6865640cbdfa --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/mitsumi,mm8013.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/mitsumi,mm8013.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mitsumi MM8013 fuel gauge + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: mitsumi,mm8013 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + fuel-gauge@55 { + compatible = "mitsumi,mm8013"; + reg = <0x55>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8916-bms-vm.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8916-bms-vm.yaml new file mode 100644 index 000000000000..ad764e69ab57 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8916-bms-vm.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/qcom,pm8916-bms-vm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Voltage Mode BMS + +maintainers: + - Nikita Travkin <nikita@trvn.ru> + +description: + Voltage Mode BMS is a hardware block found in some Qualcomm PMICs + such as pm8916. This block performs battery voltage monitoring. + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: qcom,pm8916-bms-vm + + reg: + maxItems: 1 + + interrupts: + items: + - description: BMS FSM left S3 mode + - description: BMS FSM entered S2 mode + - description: OCV measured in S3 mode + - description: OCV below threshold + - description: FIFO update done + - description: BMS FSM switched state + + interrupt-names: + items: + - const: cv_leave + - const: cv_enter + - const: ocv_good + - const: ocv_thr + - const: fifo + - const: state_chg + + monitored-battery: true + + power-supplies: true + +required: + - compatible + - reg + - interrupts + - interrupt-names + - monitored-battery + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + #address-cells = <1>; + #size-cells = <0>; + + battery@4000 { + compatible = "qcom,pm8916-bms-vm"; + reg = <0x4000>; + interrupts = <0x0 0x40 0 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 1 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 2 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 3 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 4 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 5 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "cv_leave", + "cv_enter", + "ocv_good", + "ocv_thr", + "fifo", + "state_chg"; + + monitored-battery = <&battery>; + power-supplies = <&pm8916_charger>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8916-lbc.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8916-lbc.yaml new file mode 100644 index 000000000000..cdf14e5ed119 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8916-lbc.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/qcom,pm8916-lbc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Linear Battery Charger + +maintainers: + - Nikita Travkin <nikita@trvn.ru> + +description: + Linear Battery Charger hardware block, found in some Qualcomm PMICs + such as pm8916. Implements a simple, autonomous CC/CV charger. + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: qcom,pm8916-lbc + + reg: + items: + - description: Charger + - description: Battery + - description: USB + - description: MISC + + reg-names: + items: + - const: chgr + - const: bat_if + - const: usb + - const: misc + + interrupts: + items: + - description: Battery detection + - description: Fast charging + - description: Charging failed + - description: Charging done + - description: Battery present + - description: Battery temperature OK + - description: USB coarse detection + - description: USB IN valid + - description: Charger gone + - description: Overtemperature + + interrupt-names: + items: + - const: vbat_det + - const: fast_chg + - const: chg_fail + - const: chg_done + - const: bat_pres + - const: temp_ok + - const: coarse_det + - const: usb_vbus + - const: chg_gone + - const: overtemp + + qcom,fast-charge-safe-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 4000000 + maximum: 4775000 + description: + Maximum safe battery voltage in uV; May be pre-set by bootloader, + in which case, setting this will harmlessly fail. + + qcom,fast-charge-safe-current: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 90000 + maximum: 1440000 + description: + Maximum safe battery charge current in uA; May be pre-set by + bootloader, in which case setting this will harmlessly fail. + + monitored-battery: true + +required: + - compatible + - reg + - interrupts + - interrupt-names + - qcom,fast-charge-safe-voltage + - qcom,fast-charge-safe-current + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + #address-cells = <1>; + #size-cells = <0>; + + charger@1000 { + compatible = "qcom,pm8916-lbc"; + reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>; + reg-names = "chgr", "bat_if", "usb", "misc"; + + interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "vbat_det", + "fast_chg", + "chg_fail", + "chg_done", + "bat_pres", + "temp_ok", + "coarse_det", + "usb_vbus", + "chg_gone", + "overtemp"; + monitored-battery = <&battery>; + + qcom,fast-charge-safe-current = <900000>; + qcom,fast-charge-safe-voltage = <4300000>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml index f255f3858d08..2e21846463ba 100644 --- a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml +++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml @@ -47,6 +47,12 @@ patternProperties: "^i2c@[1-4]$": type: object $ref: /schemas/i2c/i2c-controller.yaml# + unevaluatedProperties: false + + properties: + reg: + minimum: 1 + maximum: 4 examples: - | diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt deleted file mode 100644 index ee125cb0e46d..000000000000 --- a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt +++ /dev/null @@ -1,34 +0,0 @@ -AB85000 PMIC contains a node, which contains shared -information about the battery connected to the PMIC. -The node has no compatible property. - -Properties of this node are: - -thermistor-on-batctrl: - A boolean value indicating thermistor interface to battery - - Note: - 'btemp' and 'batctrl' are the pins interfaced for battery temperature - measurement, 'btemp' signal is used when NTC(negative temperature - coefficient) resister is interfaced external to battery whereas - 'batctrl' pin is used when NTC resister is internal to battery. - - Example: - ab8500_battery: ab8500_battery { - thermistor-on-batctrl; - }; - indicates: NTC resister is internal to battery, 'batctrl' is used - for thermal measurement. - - The absence of property 'thermal-on-batctrl' indicates - NTC resister is external to battery and 'btemp' signal is used - for thermal measurement. - -battery-type: - This shall be the battery manufacturing technology type, - allowed types are: - "UNKNOWN" "NiMH" "LION" "LIPO" "LiFe" "NiCd" "LiMn" - Example: - ab8500_battery: ab8500_battery { - stericsson,battery-type = "LIPO"; - } diff --git a/Documentation/devicetree/bindings/regulator/adi,max77503-regulator.yaml b/Documentation/devicetree/bindings/regulator/adi,max77503-regulator.yaml new file mode 100644 index 000000000000..aa581e550be2 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/adi,max77503-regulator.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2023 Analog Devices, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/adi,max77503-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX77503 Buck Converter + +maintainers: + - Gokhan Celik <Gokhan.Celik@analog.com> + +description: | + The Analog Devices MAX77503 is a single channel 14V input, 1.5A + high-efficiency buck converter. This converter has 94% efficiency + for 2-Cell/3-Cell battery applications. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - adi,max77503 + + reg: + description: I2C address of the device + items: + - enum: [0x1e, 0x24, 0x37] + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@1e { + compatible = "adi,max77503"; + reg = <0x1e>; + + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <5000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/da9210.txt b/Documentation/devicetree/bindings/regulator/da9210.txt deleted file mode 100644 index 58065ca9e3b4..000000000000 --- a/Documentation/devicetree/bindings/regulator/da9210.txt +++ /dev/null @@ -1,29 +0,0 @@ -* Dialog Semiconductor DA9210 Multi-phase 12A DCDC BUCK Converter - -Required properties: - -- compatible: must be "dlg,da9210" -- reg: the i2c slave address of the regulator. It should be 0x68. - -Optional properties: - -- interrupts: a reference to the DA9210 interrupt, if available. - -Any standard regulator properties can be used to configure the single da9210 -DCDC. - -Example: - - da9210@68 { - compatible = "dlg,da9210"; - reg = <0x68>; - - interrupt-parent = <...>; - interrupts = <...>; - - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <1600000>; - regulator-max-microamp = <4600000>; - regulator-boot-on; - }; diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9210.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9210.yaml new file mode 100644 index 000000000000..81f23de36de4 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/dlg,da9210.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/dlg,da9210.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog Semiconductor DA9210 Multi-Phase 12A DC-DC Buck Converter + +maintainers: + - Support Opensource <support.opensource@diasemi.com> + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + const: dlg,da9210 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@68 { + compatible = "dlg,da9210"; + reg = <0x68>; + + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <1600000>; + regulator-max-microamp = <4600000>; + regulator-boot-on; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml index ac0281b1cceb..ce7751b9129c 100644 --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml @@ -100,6 +100,11 @@ properties: vin-supply: description: Input supply phandle. + interrupts: + maxItems: 1 + description: + Interrupt signaling a critical under-voltage event. + required: - compatible - regulator-name diff --git a/Documentation/devicetree/bindings/regulator/maxim,max20086.yaml b/Documentation/devicetree/bindings/regulator/maxim,max20086.yaml index 05f72391185e..7394c0a339c5 100644 --- a/Documentation/devicetree/bindings/regulator/maxim,max20086.yaml +++ b/Documentation/devicetree/bindings/regulator/maxim,max20086.yaml @@ -43,6 +43,7 @@ properties: "^OUT[1-4]$": type: object $ref: regulator.yaml# + unevaluatedProperties: false additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml index 78c0b63243f7..6d6bbfbd26d4 100644 --- a/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml +++ b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml @@ -30,10 +30,12 @@ properties: "^LDO([1-9]|1[0-5])$": type: object $ref: regulator.yaml# + unevaluatedProperties: false "^BUCK|BUCKBOOST$": type: object $ref: regulator.yaml# + unevaluatedProperties: false additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6358-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6358-regulator.yaml new file mode 100644 index 000000000000..c50402fcba72 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6358-regulator.yaml @@ -0,0 +1,250 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mediatek,mt6358-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6358 Regulator + +maintainers: + - Zhiyong Tao <zhiyong.tao@mediatek.com> + +description: + Regulator node of the PMIC. This node should under the PMIC's device node. + All voltage regulators provided by the PMIC are described as sub-nodes of + this node. + +properties: + compatible: + oneOf: + - const: mediatek,mt6358-regulator + - items: + - const: mediatek,mt6366-regulator + - const: mediatek,mt6358-regulator + + vsys-ldo1-supply: + description: Supply for LDOs vfe28, vxo22, vcn28, vaux18, vaud28, vsim1, vusb, vbif28 + vsys-ldo2-supply: + description: Supply for LDOs vldo28 (MT6358 only), vio28, vmc, vmch, vsim2 + vsys-ldo3-supply: + description: Supply for LDOs vcn33, vcama[12] (MT6358 only), vemc, vibr + vsys-vcore-supply: + description: Supply for buck regulator vcore + vsys-vdram1-supply: + description: Supply for buck regulator vdram1 + vsys-vgpu-supply: + description: Supply for buck regulator vgpu + vsys-vmodem-supply: + description: Supply for buck regulator vmodem + vsys-vpa-supply: + description: Supply for buck regulator vpa + vsys-vproc11-supply: + description: Supply for buck regulator vproc11 + vsys-vproc12-supply: + description: Supply for buck regulator vproc12 + vsys-vs1-supply: + description: Supply for buck regulator vs1 + vsys-vs2-supply: + description: Supply for buck regulator vs2 + vs1-ldo1-supply: + description: + Supply for LDOs vrf18, vefuse, vcn18, vcamio (MT6358 only), vio18, vm18 (MT6366 only) + vs2-ldo1-supply: + description: Supply for LDOs vdram2, vmddr (MT6366 only) + vs2-ldo2-supply: + description: Supply for LDOs vrf12, va12 + vs2-ldo3-supply: + description: + Supply for LDOs vsram-core (MT6366 only), vsram-gpu, vsram-others, vsram-proc11, vsram-proc12 + vs2-ldo4-supply: + description: Supply for LDO vcamd + +patternProperties: + "^(buck_)?v(core|dram1|gpu|modem|pa|proc1[12]|s[12])$": + description: Buck regulators + type: object + $ref: regulator.yaml# + properties: + regulator-allowed-modes: + description: | + Buck regulatpr operating modes allowed. Valid values below. + Users should use the macros from dt-bindings/regulator/mediatek,mt6397-regulator.h + 0 (MT6397_BUCK_MODE_AUTO): Auto PFM/PWM mode + 1 (MT6397_BUCK_MODE_FORCE_PWM): Forced PWM mode + items: + enum: [0, 1] + unevaluatedProperties: false + + "^(ldo_)?v(a|rf)12$": + description: LDOs with fixed 1.2V output and 0~100/10mV tuning + type: object + $ref: regulator.yaml# + properties: + regulator-allowed-modes: false + unevaluatedProperties: false + + "^(ldo_)?v((aux|cn|io|rf)18|camio)$": + description: + LDOs with fixed 1.8V output and 0~100/10mV tuning (vcn18 on MT6366 has variable output) + type: object + $ref: regulator.yaml# + properties: + regulator-allowed-modes: false + unevaluatedProperties: false + + "^(ldo_)?vxo22$": + description: LDOs with fixed 2.2V output and 0~100/10mV tuning + type: object + $ref: regulator.yaml# + properties: + regulator-allowed-modes: false + unevaluatedProperties: false + + "^(ldo_)?v(aud|bif|cn|fe|io)28$": + description: LDOs with fixed 2.8V output and 0~100/10mV tuning + type: object + $ref: regulator.yaml# + properties: + regulator-allowed-modes: false + unevaluatedProperties: false + + "^(ldo_)?vusb$": + description: LDOs with fixed 3.0V output and 0~100/10mV tuning + type: object + $ref: regulator.yaml# + properties: + regulator-allowed-modes: false + unevaluatedProperties: false + + "^(ldo_)?vsram[_-](core|gpu|others|proc1[12])$": + description: LDOs with variable output + type: object + $ref: regulator.yaml# + properties: + regulator-allowed-modes: false + unevaluatedProperties: false + + "^(ldo_)?v(cama[12]|camd|cn33|dram2|efuse|emc|ibr|ldo28|m18|mc|mch|mddr|sim[12])$": + description: LDOs with variable output and 0~100/10mV tuning + type: object + $ref: regulator.yaml# + properties: + regulator-allowed-modes: false + unevaluatedProperties: false + +required: + - compatible + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + const: mediatek,mt6358-regulator + then: + patternProperties: + # Old regulator node name scheme (with prefix and underscores) only + # ([^y-] is used to avoid matching -supply + "^(?<!buck_)(?<!ldo_)v.*[^y-](?!-supply)$": false + "^ldo_vsram-": false + # vsram_core regulator doesn't exist on MT6358 + "^ldo_vsram[-_]core$": false + + properties: + # vm18 and vmddr regulators don't exist on MT6358 + ldo_vm18: false + ldo_vmddr: false + + - if: + properties: + compatible: + contains: + const: mediatek,mt6366-regulator + then: + patternProperties: + # Prefer cleaned up regulator node names + "^(buck|ldo)_": false + # Don't allow underscores + "^vsram_": false + # vcam* regulators don't exist on MT6366 + "^vcam": false + + properties: + # vldo28 regulator doesn't exist on MT6366 + vldo28: false + # vs2_ldo4 supply pin doesn't exist on MT6366 + vs2-ldo4-supply: false + +examples: + - | + #include <dt-bindings/regulator/mediatek,mt6397-regulator.h> + + regulator { + compatible = "mediatek,mt6358-regulator"; + + buck_vgpu { + regulator-name = "vgpu"; + regulator-min-microvolt = <625000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO + MT6397_BUCK_MODE_FORCE_PWM>; + }; + + ldo_vsram_gpu { + regulator-name = "vsram_gpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + }; + }; + + - | + #include <dt-bindings/regulator/mediatek,mt6397-regulator.h> + + regulator { + compatible = "mediatek,mt6366-regulator", "mediatek,mt6358-regulator"; + + vdram1 { + regulator-name = "pp1125_emi_vdd2"; + regulator-min-microvolt = <1125000>; + regulator-max-microvolt = <1125000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO + MT6397_BUCK_MODE_FORCE_PWM>; + regulator-always-on; + }; + + vproc11 { + regulator-name = "ppvar_dvdd_proc_bc_mt6366"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1200000>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO + MT6397_BUCK_MODE_FORCE_PWM>; + regulator-always-on; + }; + + vmddr { + regulator-name = "pm0750_emi_vmddr"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <750000>; + regulator-enable-ramp-delay = <325>; + regulator-always-on; + }; + + vsram-proc11 { + regulator-name = "pp0900_dvdd_sram_bc"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1120000>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq2286.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq2286.yaml new file mode 100644 index 000000000000..1296f9b30862 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mps,mpq2286.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mps,mpq2286.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Monolithic Power System MPQ2286 PMIC + +maintainers: + - Saravanan Sekar <saravanan@linumiz.com> + +properties: + compatible: + enum: + - mps,mpq2286 + + reg: + maxItems: 1 + + regulators: + type: object + + properties: + buck: + type: object + $ref: regulator.yaml# + + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@3 { + compatible = "mps,mpq2286"; + reg = <0x3>; + + regulators { + buck { + regulator-name = "buck"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt deleted file mode 100644 index b6384306db5c..000000000000 --- a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt +++ /dev/null @@ -1,350 +0,0 @@ -MediaTek MT6358 Regulator - -All voltage regulators provided by the MT6358 PMIC are described as the -subnodes of the MT6358 regulators node. Each regulator is named according -to its regulator type, buck_<name> and ldo_<name>. The definition for each -of these nodes is defined using the standard binding for regulators at -Documentation/devicetree/bindings/regulator/regulator.txt. - -The valid names for regulators are:: -BUCK: - buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu, - buck_vs2, buck_vmodem, buck_vs1 -LDO: - ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio, - ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others, - ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28, - ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18, - ldo_vcn33, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, ldo_vsim2 - -Example: - - pmic { - compatible = "mediatek,mt6358"; - - mt6358regulator: mt6358regulator { - compatible = "mediatek,mt6358-regulator"; - - mt6358_vdram1_reg: buck_vdram1 { - regulator-compatible = "buck_vdram1"; - regulator-name = "vdram1"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <2087500>; - regulator-ramp-delay = <12500>; - regulator-enable-ramp-delay = <0>; - regulator-always-on; - }; - - mt6358_vcore_reg: buck_vcore { - regulator-name = "vcore"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1293750>; - regulator-ramp-delay = <6250>; - regulator-enable-ramp-delay = <200>; - regulator-always-on; - }; - - mt6358_vpa_reg: buck_vpa { - regulator-name = "vpa"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <3650000>; - regulator-ramp-delay = <50000>; - regulator-enable-ramp-delay = <250>; - }; - - mt6358_vproc11_reg: buck_vproc11 { - regulator-name = "vproc11"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1293750>; - regulator-ramp-delay = <6250>; - regulator-enable-ramp-delay = <200>; - regulator-always-on; - }; - - mt6358_vproc12_reg: buck_vproc12 { - regulator-name = "vproc12"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1293750>; - regulator-ramp-delay = <6250>; - regulator-enable-ramp-delay = <200>; - regulator-always-on; - }; - - mt6358_vgpu_reg: buck_vgpu { - regulator-name = "vgpu"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1293750>; - regulator-ramp-delay = <6250>; - regulator-enable-ramp-delay = <200>; - }; - - mt6358_vs2_reg: buck_vs2 { - regulator-name = "vs2"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <2087500>; - regulator-ramp-delay = <12500>; - regulator-enable-ramp-delay = <0>; - regulator-always-on; - }; - - mt6358_vmodem_reg: buck_vmodem { - regulator-name = "vmodem"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1293750>; - regulator-ramp-delay = <6250>; - regulator-enable-ramp-delay = <900>; - regulator-always-on; - }; - - mt6358_vs1_reg: buck_vs1 { - regulator-name = "vs1"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <2587500>; - regulator-ramp-delay = <12500>; - regulator-enable-ramp-delay = <0>; - regulator-always-on; - }; - - mt6358_vdram2_reg: ldo_vdram2 { - regulator-name = "vdram2"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1800000>; - regulator-enable-ramp-delay = <3300>; - }; - - mt6358_vsim1_reg: ldo_vsim1 { - regulator-name = "vsim1"; - regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <3100000>; - regulator-enable-ramp-delay = <540>; - }; - - mt6358_vibr_reg: ldo_vibr { - regulator-name = "vibr"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3300000>; - regulator-enable-ramp-delay = <60>; - }; - - mt6358_vrf12_reg: ldo_vrf12 { - compatible = "regulator-fixed"; - regulator-name = "vrf12"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-enable-ramp-delay = <120>; - }; - - mt6358_vio18_reg: ldo_vio18 { - compatible = "regulator-fixed"; - regulator-name = "vio18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-enable-ramp-delay = <2700>; - regulator-always-on; - }; - - mt6358_vusb_reg: ldo_vusb { - regulator-name = "vusb"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3100000>; - regulator-enable-ramp-delay = <270>; - regulator-always-on; - }; - - mt6358_vcamio_reg: ldo_vcamio { - compatible = "regulator-fixed"; - regulator-name = "vcamio"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-enable-ramp-delay = <270>; - }; - - mt6358_vcamd_reg: ldo_vcamd { - regulator-name = "vcamd"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1800000>; - regulator-enable-ramp-delay = <270>; - }; - - mt6358_vcn18_reg: ldo_vcn18 { - compatible = "regulator-fixed"; - regulator-name = "vcn18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-enable-ramp-delay = <270>; - }; - - mt6358_vfe28_reg: ldo_vfe28 { - compatible = "regulator-fixed"; - regulator-name = "vfe28"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-enable-ramp-delay = <270>; - }; - - mt6358_vsram_proc11_reg: ldo_vsram_proc11 { - regulator-name = "vsram_proc11"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1293750>; - regulator-ramp-delay = <6250>; - regulator-enable-ramp-delay = <240>; - regulator-always-on; - }; - - mt6358_vcn28_reg: ldo_vcn28 { - compatible = "regulator-fixed"; - regulator-name = "vcn28"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-enable-ramp-delay = <270>; - }; - - mt6358_vsram_others_reg: ldo_vsram_others { - regulator-name = "vsram_others"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1293750>; - regulator-ramp-delay = <6250>; - regulator-enable-ramp-delay = <240>; - regulator-always-on; - }; - - mt6358_vsram_gpu_reg: ldo_vsram_gpu { - regulator-name = "vsram_gpu"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1293750>; - regulator-ramp-delay = <6250>; - regulator-enable-ramp-delay = <240>; - }; - - mt6358_vxo22_reg: ldo_vxo22 { - compatible = "regulator-fixed"; - regulator-name = "vxo22"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-enable-ramp-delay = <120>; - regulator-always-on; - }; - - mt6358_vefuse_reg: ldo_vefuse { - regulator-name = "vefuse"; - regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <1900000>; - regulator-enable-ramp-delay = <270>; - }; - - mt6358_vaux18_reg: ldo_vaux18 { - compatible = "regulator-fixed"; - regulator-name = "vaux18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-enable-ramp-delay = <270>; - }; - - mt6358_vmch_reg: ldo_vmch { - regulator-name = "vmch"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <3300000>; - regulator-enable-ramp-delay = <60>; - }; - - mt6358_vbif28_reg: ldo_vbif28 { - compatible = "regulator-fixed"; - regulator-name = "vbif28"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-enable-ramp-delay = <270>; - }; - - mt6358_vsram_proc12_reg: ldo_vsram_proc12 { - regulator-name = "vsram_proc12"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1293750>; - regulator-ramp-delay = <6250>; - regulator-enable-ramp-delay = <240>; - regulator-always-on; - }; - - mt6358_vcama1_reg: ldo_vcama1 { - regulator-name = "vcama1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-enable-ramp-delay = <270>; - }; - - mt6358_vemc_reg: ldo_vemc { - regulator-name = "vemc"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <3300000>; - regulator-enable-ramp-delay = <60>; - regulator-always-on; - }; - - mt6358_vio28_reg: ldo_vio28 { - compatible = "regulator-fixed"; - regulator-name = "vio28"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-enable-ramp-delay = <270>; - }; - - mt6358_va12_reg: ldo_va12 { - compatible = "regulator-fixed"; - regulator-name = "va12"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-enable-ramp-delay = <270>; - regulator-always-on; - }; - - mt6358_vrf18_reg: ldo_vrf18 { - compatible = "regulator-fixed"; - regulator-name = "vrf18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-enable-ramp-delay = <120>; - }; - - mt6358_vcn33_reg: ldo_vcn33 { - regulator-name = "vcn33"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3500000>; - regulator-enable-ramp-delay = <270>; - }; - - mt6358_vcama2_reg: ldo_vcama2 { - regulator-name = "vcama2"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-enable-ramp-delay = <270>; - }; - - mt6358_vmc_reg: ldo_vmc { - regulator-name = "vmc"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-enable-ramp-delay = <60>; - }; - - mt6358_vldo28_reg: ldo_vldo28 { - regulator-name = "vldo28"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3000000>; - regulator-enable-ramp-delay = <270>; - }; - - mt6358_vaud28_reg: ldo_vaud28 { - compatible = "regulator-fixed"; - regulator-name = "vaud28"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-enable-ramp-delay = <270>; - }; - - mt6358_vsim2_reg: ldo_vsim2 { - regulator-name = "vsim2"; - regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <3100000>; - regulator-enable-ramp-delay = <540>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml b/Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml index eb61e04ef852..b5181719daa1 100644 --- a/Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml +++ b/Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml @@ -48,10 +48,12 @@ properties: "^LDO[1-4]$": type: object $ref: regulator.yaml# + unevaluatedProperties: false "^BUCK|BOOST$": type: object $ref: regulator.yaml# + unevaluatedProperties: false additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml index 127a6f39b7f0..acd37f28ef53 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml @@ -50,6 +50,7 @@ description: | For PM8550, smps1 - smps6, ldo1 - ldo17, bob1 - bob2 For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 For PMI8998, bob + For PMC8380, smps1 - smps8, ldo1 - lodo3 For PMR735A, smps1 - smps3, ldo1 - ldo7 For PMX55, smps1 - smps7, ldo1 - ldo16 For PMX65, smps1 - smps8, ldo1 - ldo21 @@ -78,6 +79,7 @@ properties: - qcom,pm8998-rpmh-regulators - qcom,pmc8180-rpmh-regulators - qcom,pmc8180c-rpmh-regulators + - qcom,pmc8380-rpmh-regulators - qcom,pmg1110-rpmh-regulators - qcom,pmi8998-rpmh-regulators - qcom,pmm8155au-rpmh-regulators @@ -368,6 +370,16 @@ allOf: properties: compatible: enum: + - qcom,pmc8380-rpmh-regulators + then: + patternProperties: + "^vdd-l[1-3]-supply$": true + "^vdd-s[1-8]-supply$": true + + - if: + properties: + compatible: + enum: - qcom,pmg1110-rpmh-regulators then: properties: diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml index bdf34c2de96b..7a1b7d2abbd4 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml @@ -17,12 +17,15 @@ properties: - qcom,pm660l-regulators - qcom,pm8004-regulators - qcom,pm8005-regulators + - qcom,pm8019-regulators - qcom,pm8226-regulators - qcom,pm8841-regulators + - qcom,pm8909-regulators - qcom,pm8916-regulators - qcom,pm8941-regulators - qcom,pm8950-regulators - qcom,pm8994-regulators + - qcom,pma8084-regulators - qcom,pmi8994-regulators - qcom,pmp8074-regulators - qcom,pms405-regulators @@ -32,7 +35,7 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle patternProperties: - "^(5vs[1-2]|(l|s)[1-9][0-9]?|lvs[1-3])$": + "^(5vs[1-2]|(l|s)[1-9][0-9]?|lvs[1-4])$": description: List of regulators and its properties type: object $ref: regulator.yaml# @@ -181,6 +184,25 @@ allOf: compatible: contains: enum: + - qcom,pm8019-regulators + then: + properties: + vdd_l1-supply: true + vdd_l2_l3-supply: true + vdd_l4_l5_l6-supply: true + vdd_l7_l8_l11-supply: true + vdd_l9-supply: true + vdd_l10-supply: true + vdd_l12-supply: true + vdd_l13_l14-supply: true + patternProperties: + "^vdd_s[1-4]-supply$": true + + - if: + properties: + compatible: + contains: + enum: - qcom,pm8226-regulators then: properties: @@ -211,6 +233,24 @@ allOf: compatible: contains: enum: + - qcom,pm8909-regulators + then: + properties: + vdd_s1-supply: true + vdd_s2-supply: true + vdd_l1-supply: true + vdd_l2_l5-supply: true + vdd_l3_l6_l10-supply: true + vdd_l4_l7-supply: true + vdd_l8_l11_l15_l18-supply: true + vdd_l9_l12_l14_l17-supply: true + vdd_l13-supply: true + + - if: + properties: + compatible: + contains: + enum: - qcom,pm8916-regulators then: properties: @@ -300,6 +340,32 @@ allOf: compatible: contains: enum: + - qcom,pma8084-regulators + then: + properties: + vdd_l1_l11-supply: true + vdd_l2_l3_l4_l27-supply: true + vdd_l5_l7-supply: true + vdd_l6_l12_l14_l15_l26-supply: true + vdd_l8-supply: true + vdd_l9_l10_l13_l20_l23_l24-supply: true + vdd_l16_l25-supply: true + vdd_l17-supply: true + vdd_l18-supply: true + vdd_l19-supply: true + vdd_l21-supply: true + vdd_l22-supply: true + vdd_lvs1_2-supply: true + vdd_lvs3_4-supply: true + vdd_5vs1-supply: true + patternProperties: + "^vdd_s([1-9]|1[0-2])-supply$": true + + - if: + properties: + compatible: + contains: + enum: - qcom,pmi8994-regulators then: properties: diff --git a/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml index 4bea679a0f61..5c280117dc93 100644 --- a/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml @@ -31,7 +31,7 @@ properties: remoteproc device. This is variable and describes the memories shared with the remote processor (e.g. remoteproc firmware and carveouts, rpmsg vrings, ...). - (see ../reserved-memory/reserved-memory.yaml) + (see reserved-memory/reserved-memory.yaml in dtschema project) required: - compatible diff --git a/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml b/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml deleted file mode 100644 index 851ec24d6142..000000000000 --- a/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml +++ /dev/null @@ -1,52 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/reserved-memory/framebuffer.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: /reserved-memory framebuffer node - -maintainers: - - devicetree-spec@vger.kernel.org - -allOf: - - $ref: reserved-memory.yaml - -properties: - compatible: - const: framebuffer - description: > - This indicates a region of memory meant to be used as a framebuffer for - a set of display devices. It can be used by an operating system to keep - the framebuffer from being overwritten and use it as the backing memory - for a display device (such as simple-framebuffer). - -unevaluatedProperties: false - -examples: - - | - / { - compatible = "foo"; - model = "foo"; - #address-cells = <1>; - #size-cells = <1>; - - chosen { - framebuffer { - compatible = "simple-framebuffer"; - memory-region = <&fb>; - }; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - fb: framebuffer@80000000 { - compatible = "framebuffer"; - reg = <0x80000000 0x007e9000>; - }; - }; - }; -... diff --git a/Documentation/devicetree/bindings/reserved-memory/memory-region.yaml b/Documentation/devicetree/bindings/reserved-memory/memory-region.yaml deleted file mode 100644 index 592f180e6b0d..000000000000 --- a/Documentation/devicetree/bindings/reserved-memory/memory-region.yaml +++ /dev/null @@ -1,40 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/reserved-memory/memory-region.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Reserved Memory Region - -maintainers: - - devicetree-spec@vger.kernel.org - -description: | - Regions in the /reserved-memory node may be referenced by other device - nodes by adding a memory-region property to the device node. - -select: true - -properties: - memory-region: - $ref: /schemas/types.yaml#/definitions/phandle-array - description: > - Phandle to a /reserved-memory child node assigned to the device. - - memory-region-names: - $ref: /schemas/types.yaml#/definitions/string-array - description: > - A list of names, one for each corresponding entry in the - memory-region property - -additionalProperties: true - -examples: - - | - fb0: video@12300000 { - /* ... */ - reg = <0x12300000 0x1000>; - memory-region = <&display_reserved>; - }; - -... diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt index 1810701a8509..8ce72996d500 100644 --- a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt +++ b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt @@ -1 +1 @@ -This file has been moved to reserved-memory.yaml. +This file has been moved to reserved-memory.yaml in the dtschema repository. diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml deleted file mode 100644 index c680e397cfd2..000000000000 --- a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml +++ /dev/null @@ -1,181 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/reserved-memory/reserved-memory.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: /reserved-memory Child Node Common - -maintainers: - - devicetree-spec@vger.kernel.org - -description: > - Reserved memory is specified as a node under the /reserved-memory node. The - operating system shall exclude reserved memory from normal usage one can - create child nodes describing particular reserved (excluded from normal use) - memory regions. Such memory regions are usually designed for the special - usage by various device drivers. - - Each child of the reserved-memory node specifies one or more regions - of reserved memory. Each child node may either use a 'reg' property to - specify a specific range of reserved memory, or a 'size' property with - optional constraints to request a dynamically allocated block of - memory. - - Following the generic-names recommended practice, node names should - reflect the purpose of the node (ie. "framebuffer" or "dma-pool"). - Unit address (@<address>) should be appended to the name if the node - is a static allocation. - -properties: - reg: true - - size: - oneOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - $ref: /schemas/types.yaml#/definitions/uint64 - description: > - Length based on parent's \#size-cells. Size in bytes of memory to - reserve. - - alignment: - oneOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - $ref: /schemas/types.yaml#/definitions/uint64 - description: > - Length based on parent's \#size-cells. Address boundary for - alignment of allocation. - - alloc-ranges: - $ref: /schemas/types.yaml#/definitions/uint32-array - description: > - Address and Length pairs. Specifies regions of memory that are - acceptable to allocate from. - - iommu-addresses: - $ref: /schemas/types.yaml#/definitions/phandle-array - description: > - A list of phandle and specifier pairs that describe static IO virtual - address space mappings and carveouts associated with a given reserved - memory region. The phandle in the first cell refers to the device for - which the mapping or carveout is to be created. - - The specifier consists of an address/size pair and denotes the IO - virtual address range of the region for the given device. The exact - format depends on the values of the "#address-cells" and "#size-cells" - properties of the device referenced via the phandle. - - When used in combination with a "reg" property, an IOVA mapping is to - be established for this memory region. One example where this can be - useful is to create an identity mapping for physical memory that the - firmware has configured some hardware to access (such as a bootsplash - framebuffer). - - If no "reg" property is specified, the "iommu-addresses" property - defines carveout regions in the IOVA space for the given device. This - can be useful if a certain memory region should not be mapped through - the IOMMU. - - no-map: - type: boolean - description: > - Indicates the operating system must not create a virtual mapping - of the region as part of its standard mapping of system memory, - nor permit speculative access to it under any circumstances other - than under the control of the device driver using the region. - - reusable: - type: boolean - description: > - The operating system can use the memory in this region with the - limitation that the device driver(s) owning the region need to be - able to reclaim it back. Typically that means that the operating - system can use that region to store volatile or cached data that - can be otherwise regenerated or migrated elsewhere. - -allOf: - - if: - required: - - no-map - - then: - not: - required: - - reusable - - - if: - required: - - reusable - - then: - not: - required: - - no-map - -oneOf: - - oneOf: - - required: - - reg - - - required: - - size - - - oneOf: - # IOMMU reservations - - required: - - iommu-addresses - - # IOMMU mappings - - required: - - reg - - iommu-addresses - -additionalProperties: true - -examples: - - | - / { - compatible = "foo"; - model = "foo"; - - #address-cells = <2>; - #size-cells = <2>; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - adsp_resv: reservation-adsp { - /* - * Restrict IOVA mappings for ADSP buffers to the 512 MiB region - * from 0x40000000 - 0x5fffffff. Anything outside is reserved by - * the ADSP for I/O memory and private memory allocations. - */ - iommu-addresses = <&adsp 0x0 0x00000000 0x00 0x40000000>, - <&adsp 0x0 0x60000000 0xff 0xa0000000>; - }; - - fb: framebuffer@90000000 { - reg = <0x0 0x90000000 0x0 0x00800000>; - iommu-addresses = <&dc0 0x0 0x90000000 0x0 0x00800000>; - }; - }; - - bus@0 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x0 0x40000000>; - - adsp: adsp@2990000 { - reg = <0x2990000 0x2000>; - memory-region = <&adsp_resv>; - }; - - dc0: display@15200000 { - reg = <0x15200000 0x10000>; - memory-region = <&fb>; - }; - }; - }; -... diff --git a/Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml b/Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml deleted file mode 100644 index 457de0920cd1..000000000000 --- a/Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml +++ /dev/null @@ -1,97 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/reserved-memory/shared-dma-pool.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: /reserved-memory DMA pool - -maintainers: - - devicetree-spec@vger.kernel.org - -allOf: - - $ref: reserved-memory.yaml - -properties: - compatible: - oneOf: - - const: shared-dma-pool - description: > - This indicates a region of memory meant to be used as a shared - pool of DMA buffers for a set of devices. It can be used by an - operating system to instantiate the necessary pool management - subsystem if necessary. - - - const: restricted-dma-pool - description: > - This indicates a region of memory meant to be used as a pool - of restricted DMA buffers for a set of devices. The memory - region would be the only region accessible to those devices. - When using this, the no-map and reusable properties must not - be set, so the operating system can create a virtual mapping - that will be used for synchronization. The main purpose for - restricted DMA is to mitigate the lack of DMA access control - on systems without an IOMMU, which could result in the DMA - accessing the system memory at unexpected times and/or - unexpected addresses, possibly leading to data leakage or - corruption. The feature on its own provides a basic level of - protection against the DMA overwriting buffer contents at - unexpected times. However, to protect against general data - leakage and system memory corruption, the system needs to - provide way to lock down the memory access, e.g., MPU. Note - that since coherent allocation needs remapping, one must set - up another device coherent pool by shared-dma-pool and use - dma_alloc_from_dev_coherent instead for atomic coherent - allocation. - - linux,cma-default: - type: boolean - description: > - If this property is present, then Linux will use the region for - the default pool of the contiguous memory allocator. - - linux,dma-default: - type: boolean - description: > - If this property is present, then Linux will use the region for - the default pool of the consistent DMA allocator. - -if: - properties: - compatible: - contains: - const: restricted-dma-pool -then: - properties: - no-map: false - reusable: false - -unevaluatedProperties: false - -examples: - - | - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* global autoconfigured region for contiguous allocations */ - linux,cma { - compatible = "shared-dma-pool"; - reusable; - size = <0x4000000>; - alignment = <0x2000>; - linux,cma-default; - }; - - display_reserved: framebuffer@78000000 { - reg = <0x78000000 0x800000>; - }; - - restricted_dma_reserved: restricted-dma-pool@50000000 { - compatible = "restricted-dma-pool"; - reg = <0x50000000 0x4000000>; - }; - }; - -... diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml index ec888f48cac8..e802e25923aa 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml @@ -64,6 +64,7 @@ patternProperties: description: A channel managed by this controller type: object + additionalProperties: false properties: reg: @@ -100,6 +101,32 @@ patternProperties: Channel assigned Rx time-slots within the Rx time-slots routed by the TSA to this cell. + compatible: + items: + - enum: + - fsl,mpc885-scc-qmc-hdlc + - fsl,mpc866-scc-qmc-hdlc + - const: fsl,cpm1-scc-qmc-hdlc + - const: fsl,qmc-hdlc + + fsl,framer: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the framer node. The framer is in charge of an E1/T1 line + interface connected to the TDM bus. It can be used to get the E1/T1 line + status such as link up/down. + + allOf: + - if: + properties: + compatible: + not: + contains: + const: fsl,qmc-hdlc + then: + properties: + fsl,framer: false + required: - reg - fsl,tx-ts-mask @@ -137,7 +164,7 @@ examples: channel@16 { /* Ch16 : First 4 even TS from all routed from TSA */ reg = <16>; - fsl,mode = "transparent"; + fsl,operational-mode = "transparent"; fsl,reverse-data; fsl,tx-ts-mask = <0x00000000 0x000000aa>; fsl,rx-ts-mask = <0x00000000 0x000000aa>; @@ -146,7 +173,7 @@ examples: channel@17 { /* Ch17 : First 4 odd TS from all routed from TSA */ reg = <17>; - fsl,mode = "transparent"; + fsl,operational-mode = "transparent"; fsl,reverse-data; fsl,tx-ts-mask = <0x00000000 0x00000055>; fsl,rx-ts-mask = <0x00000000 0x00000055>; @@ -154,9 +181,13 @@ examples: channel@19 { /* Ch19 : 8 TS (TS 8..15) from all routed from TSA */ + compatible = "fsl,mpc885-scc-qmc-hdlc", + "fsl,cpm1-scc-qmc-hdlc", + "fsl,qmc-hdlc"; reg = <19>; - fsl,mode = "hdlc"; + fsl,operational-mode = "hdlc"; fsl,tx-ts-mask = <0x00000000 0x0000ff00>; fsl,rx-ts-mask = <0x00000000 0x0000ff00>; + fsl,framer = <&framer>; }; }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml index f0fa92b04b32..3b212f26abc5 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml @@ -20,6 +20,7 @@ properties: items: - enum: - mediatek,mt7986-wo-ccif + - mediatek,mt7988-wo-ccif - const: syscon reg: diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml index 90520f89208b..77af276ed2a2 100644 --- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml @@ -29,7 +29,7 @@ properties: maxItems: 1 description: | Shared memory region for AFE memif. A "shared-dma-pool". - See ../reserved-memory/reserved-memory.yaml for details. + See dtschema reserved-memory/shared-dma-pool.yaml for details. mediatek,topckgen: $ref: /schemas/types.yaml#/definitions/phandle diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml index 7d60a9654912..3591c8c49bfe 100644 --- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml +++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml @@ -209,17 +209,6 @@ properties: label: maxItems: 1 -patternProperties: - "^.*@[0-9a-f],[0-9a-f]$": - type: object - additionalProperties: true - description: - Child nodes for a standalone audio codec or speaker amplifier IC. - It has RX and TX Soundwire secondary devices. - properties: - compatible: - pattern: "^sdw[0-9a-f]{1}[0-9a-f]{4}[0-9a-f]{4}[0-9a-f]{2}$" - required: - compatible - reg @@ -240,7 +229,10 @@ oneOf: - required: - qcom,ports-sinterval -additionalProperties: false +allOf: + - $ref: soundwire-controller.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml index a6f34bdd1d3c..e1ab3f523ad6 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml @@ -46,6 +46,8 @@ properties: patternProperties: "^.*@[0-9a-f]+": type: object + additionalProperties: true + properties: reg: items: diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml index 28b8ace63044..3b47b68b92cb 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml @@ -68,6 +68,8 @@ properties: patternProperties: "^.*@[0-9a-f]+": type: object + additionalProperties: true + properties: reg: items: diff --git a/Documentation/devicetree/bindings/spi/arm,pl022-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/arm,pl022-peripheral-props.yaml new file mode 100644 index 000000000000..bb8b6863b109 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/arm,pl022-peripheral-props.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/arm,pl022-peripheral-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Peripheral-specific properties for Arm PL022 SPI controller + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +select: false + +properties: + pl022,interface: + description: SPI interface type + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # SPI + - 1 # Texas Instruments Synchronous Serial Frame Format + - 2 # Microwire (Half Duplex) + + pl022,com-mode: + description: Specifies the transfer mode + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # interrupt mode + - 1 # polling mode + - 2 # DMA mode + default: 1 + + pl022,rx-level-trig: + description: Rx FIFO watermark level + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 4 + + pl022,tx-level-trig: + description: Tx FIFO watermark level + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 4 + + pl022,ctrl-len: + description: Microwire interface - Control length + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x03 + maximum: 0x1f + + pl022,wait-state: + description: Microwire interface - Wait state + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + pl022,duplex: + description: Microwire interface - Full/Half duplex + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + +additionalProperties: true +... diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml index 9ae1611175f2..48e97e240265 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml @@ -50,6 +50,7 @@ properties: patternProperties: "@[0-9a-f]+$": type: object + additionalProperties: true properties: spi-rx-bus-width: diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml index 93f14dd01afc..88be13268962 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml @@ -44,9 +44,17 @@ properties: - const: tx - const: rx + interconnects: + maxItems: 1 + interrupts: maxItems: 1 + operating-points-v2: true + + power-domains: + maxItems: 1 + reg: maxItems: 1 @@ -62,7 +70,9 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/clock/qcom,gcc-msm8996.h> + #include <dt-bindings/interconnect/qcom,msm8996.h> #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> spi@7575000 { compatible = "qcom,spi-qup-v2.2.1"; @@ -76,6 +86,9 @@ examples: pinctrl-1 = <&blsp1_spi1_sleep>; dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; dma-names = "tx", "rx"; + power-domains = <&rpmpd MSM8996_VDDCX>; + operating-points-v2 = <&spi_opp_table>; + interconnects = <&pnoc MASTER_BLSP_1 &bimc SLAVE_EBI_CH0>; #address-cells = <1>; #size-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml b/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml index e59183e53690..bed829837df1 100644 --- a/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml @@ -39,6 +39,12 @@ properties: power-domains: maxItems: 1 + renesas,csi-no-ss: + type: boolean + description: + The CSI Slave Selection (SS) pin won't be used to enable transmission and + reception. Only available when in target mode. + required: - compatible - reg @@ -50,6 +56,9 @@ required: - '#address-cells' - '#size-cells' +dependencies: + renesas,csi-no-ss: [ spi-slave ] + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml index 339fb39529f3..ac1503de0478 100644 --- a/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml +++ b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml @@ -47,6 +47,8 @@ properties: patternProperties: "^flash@[0-3]$": type: object + additionalProperties: true + properties: reg: minimum: 0 diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index a47cb144b09f..6348a387a21c 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -160,6 +160,8 @@ properties: patternProperties: "^.*@[0-9a-f]+$": type: object + additionalProperties: true + properties: reg: minimum: 0 diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index 782a014b63a7..15938f81fdce 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -113,8 +113,14 @@ properties: minItems: 2 maxItems: 4 + st,spi-midi-ns: + description: | + Only for STM32H7, (Master Inter-Data Idleness) minimum time + delay in nanoseconds inserted between two consecutive data frames. + # The controller specific properties go here. allOf: + - $ref: arm,pl022-peripheral-props.yaml# - $ref: cdns,qspi-nor-peripheral-props.yaml# - $ref: samsung,spi-peripheral-props.yaml# - $ref: nvidia,tegra210-quad-peripheral-props.yaml# diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml index 5e5a704a766e..7f174b7d0a26 100644 --- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml +++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml @@ -74,57 +74,6 @@ properties: resets: maxItems: 1 -patternProperties: - "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$": - type: object - # SPI slave nodes must be children of the SPI master node and can - # contain the following properties. - properties: - pl022,interface: - description: SPI interface type - $ref: /schemas/types.yaml#/definitions/uint32 - enum: - - 0 # SPI - - 1 # Texas Instruments Synchronous Serial Frame Format - - 2 # Microwire (Half Duplex) - - pl022,com-mode: - description: Specifies the transfer mode - $ref: /schemas/types.yaml#/definitions/uint32 - enum: - - 0 # interrupt mode - - 1 # polling mode - - 2 # DMA mode - default: 1 - - pl022,rx-level-trig: - description: Rx FIFO watermark level - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 4 - - pl022,tx-level-trig: - description: Tx FIFO watermark level - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 4 - - pl022,ctrl-len: - description: Microwire interface - Control length - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0x03 - maximum: 0x1f - - pl022,wait-state: - description: Microwire interface - Wait state - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1] - - pl022,duplex: - description: Microwire interface - Full/Half duplex - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1] - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml index 9ca1a843c820..ae0f082bd377 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml @@ -18,15 +18,6 @@ maintainers: allOf: - $ref: spi-controller.yaml# - - if: - properties: - compatible: - contains: - const: st,stm32f4-spi - - then: - properties: - st,spi-midi-ns: false properties: compatible: @@ -59,17 +50,6 @@ properties: - const: rx - const: tx -patternProperties: - "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$": - type: object - # SPI slave nodes must be children of the SPI master node and can - # contain the following properties. - properties: - st,spi-midi-ns: - description: | - Only for STM32H7, (Master Inter-Data Idleness) minimum time - delay in nanoseconds inserted between two consecutive data frames. - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml index 3721c8c8ec64..e02d04d4f71e 100644 --- a/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml @@ -18,7 +18,9 @@ allOf: properties: compatible: items: - - const: fsl,imx8qxp-sc-thermal + - enum: + - fsl,imx8dxl-sc-thermal + - fsl,imx8qxp-sc-thermal - const: fsl,imx-sc-thermal '#thermal-sensor-cells': diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml index 3aecea77869f..808d987bd8d1 100644 --- a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml @@ -60,6 +60,9 @@ properties: clocks: maxItems: 1 + "#thermal-sensor-cells": + const: 0 + required: - compatible - interrupts @@ -67,6 +70,9 @@ required: - nvmem-cells - nvmem-cell-names +allOf: + - $ref: thermal-sensor.yaml# + additionalProperties: false examples: @@ -104,5 +110,6 @@ examples: nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; + #thermal-sensor-cells = <0>; }; }; diff --git a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml index fe9ae4c425c0..e6665af52ee6 100644 --- a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml @@ -18,6 +18,7 @@ description: | properties: compatible: enum: + - mediatek,mt7988-lvts-ap - mediatek,mt8192-lvts-ap - mediatek,mt8192-lvts-mcu - mediatek,mt8195-lvts-ap diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml index 04a2ba1aa946..b0237d236021 100644 --- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml @@ -68,7 +68,12 @@ properties: patternProperties: "^(light|heavy|oc1)$": type: object + additionalProperties: false + properties: + "#cooling-cells": + const: 2 + nvidia,priority: $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 27e9e16e6455..437b74732886 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -51,6 +51,7 @@ properties: - qcom,msm8996-tsens - qcom,msm8998-tsens - qcom,qcm2290-tsens + - qcom,sa8775p-tsens - qcom,sc7180-tsens - qcom,sc7280-tsens - qcom,sc8180x-tsens diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml index 4f3acdc4dec0..4a8dabc48170 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/base.yaml# title: Thermal zone maintainers: - - Amit Kucheria <amitk@kernel.org> + - Daniel Lezcano <daniel.lezcano@linaro.org> description: | Thermal management is achieved in devicetree by describing the sensor hardware diff --git a/Documentation/devicetree/bindings/timer/cirrus,ep9301-timer.yaml b/Documentation/devicetree/bindings/timer/cirrus,ep9301-timer.yaml new file mode 100644 index 000000000000..e463e11e259d --- /dev/null +++ b/Documentation/devicetree/bindings/timer/cirrus,ep9301-timer.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/cirrus,ep9301-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic EP93xx timer + +maintainers: + - Alexander Sverdlin <alexander.sverdlin@gmail.com> + - Nikita Shubin <nikita.shubin@maquefel.me> + +properties: + compatible: + oneOf: + - const: cirrus,ep9301-timer + - items: + - enum: + - cirrus,ep9302-timer + - cirrus,ep9307-timer + - cirrus,ep9312-timer + - cirrus,ep9315-timer + - const: cirrus,ep9301-timer + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + timer@80810000 { + compatible = "cirrus,ep9301-timer"; + reg = <0x80810000 0x100>; + interrupt-parent = <&vic1>; + interrupts = <19>; + }; +... diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml index dbe1267af06a..e2607377cbae 100644 --- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml +++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml @@ -36,7 +36,9 @@ properties: - fsl,imxrt1170-gpt - const: fsl,imx6dl-gpt - items: - - const: fsl,imx6ul-gpt + - enum: + - fsl,imx6ul-gpt + - fsl,imx7d-gpt - const: fsl,imx6sx-gpt reg: @@ -46,14 +48,18 @@ properties: maxItems: 1 clocks: + minItems: 2 items: - description: SoC GPT ipg clock - description: SoC GPT per clock + - description: SoC GPT osc per clock clock-names: + minItems: 2 items: - const: ipg - const: per + - const: osc_per required: - compatible @@ -62,6 +68,29 @@ required: - clocks - clock-names +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx6dl-gpt + - fsl,imx6q-gpt + then: + properties: + clocks: + minItems: 2 + maxItems: 3 + clock-names: + minItems: 2 + maxItems: 3 + else: + properties: + clocks: + maxItems: 2 + clock-names: + maxItems: 2 + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml b/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml index bffdab0b0185..3931054b42fb 100644 --- a/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml @@ -11,8 +11,8 @@ maintainers: description: | This hardware block consists of eight 16-bit timer channels and one - 32- bit timer channel. It supports the following specifications: - - Pulse input/output: 28 lines max. + 32-bit timer channel. It supports the following specifications: + - Pulse input/output: 28 lines max - Pulse input 3 lines - Count clock 11 clocks for each channel (14 clocks for MTU0, 12 clocks for MTU2, and 10 clocks for MTU5, four clocks for MTU1-MTU2 combination @@ -23,11 +23,11 @@ description: | - Input capture function (noise filter setting available) - Counter-clearing operation - Simultaneous writing to multiple timer counters (TCNT) - (excluding MTU8). + (excluding MTU8) - Simultaneous clearing on compare match or input capture - (excluding MTU8). + (excluding MTU8) - Simultaneous input and output to registers in synchronization with - counter operations (excluding MTU8). + counter operations (excluding MTU8) - Up to 12-phase PWM output in combination with synchronous operation (excluding MTU8) - [MTU0 MTU3, MTU4, MTU6, MTU7, and MTU8] @@ -40,26 +40,26 @@ description: | - [MTU3, MTU4, MTU6, and MTU7] - Through interlocked operation of MTU3/4 and MTU6/7, the positive and negative signals in six phases (12 phases in total) can be output in - complementary PWM and reset-synchronized PWM operation. + complementary PWM and reset-synchronized PWM operation - In complementary PWM mode, values can be transferred from buffer registers to temporary registers at crests and troughs of the timer- counter values or when the buffer registers (TGRD registers in MTU4 - and MTU7) are written to. - - Double-buffering selectable in complementary PWM mode. + and MTU7) are written to + - Double-buffering selectable in complementary PWM mode - [MTU3 and MTU4] - Through interlocking with MTU0, a mode for driving AC synchronous motors (brushless DC motors) by using complementary PWM output and reset-synchronized PWM output is settable and allows the selection - of two types of waveform output (chopping or level). + of two types of waveform output (chopping or level) - [MTU5] - - Capable of operation as a dead-time compensation counter. + - Capable of operation as a dead-time compensation counter - [MTU0/MTU5, MTU1, MTU2, and MTU8] - 32-bit phase counting mode specifiable by combining MTU1 and MTU2 and - through interlocked operation with MTU0/MTU5 and MTU8. + through interlocked operation with MTU0/MTU5 and MTU8 - Interrupt-skipping function - In complementary PWM mode, interrupts on crests and troughs of counter values and triggers to start conversion by the A/D converter can be - skipped. + skipped - Interrupt sources: 43 sources. - Buffer operation: - Automatic transfer of register data (transfer from the buffer @@ -68,9 +68,9 @@ description: | - A/D converter start triggers can be generated - A/D converter start request delaying function enables A/D converter to be started with any desired timing and to be synchronized with - PWM output. + PWM output - Low power consumption function - - The MTU3a can be placed in the module-stop state. + - The MTU3a can be placed in the module-stop state There are two phase counting modes. 16-bit phase counting mode in which MTU1 and MTU2 operate independently, and cascade connection 32-bit phase @@ -109,6 +109,7 @@ properties: compatible: items: - enum: + - renesas,r9a07g043-mtu3 # RZ/{G2UL,Five} - renesas,r9a07g044-mtu3 # RZ/G2{L,LC} - renesas,r9a07g054-mtu3 # RZ/V2L - const: renesas,rz-mtu3 @@ -169,27 +170,27 @@ properties: - const: tgib0 - const: tgic0 - const: tgid0 - - const: tgiv0 + - const: tciv0 - const: tgie0 - const: tgif0 - const: tgia1 - const: tgib1 - - const: tgiv1 - - const: tgiu1 + - const: tciv1 + - const: tciu1 - const: tgia2 - const: tgib2 - - const: tgiv2 - - const: tgiu2 + - const: tciv2 + - const: tciu2 - const: tgia3 - const: tgib3 - const: tgic3 - const: tgid3 - - const: tgiv3 + - const: tciv3 - const: tgia4 - const: tgib4 - const: tgic4 - const: tgid4 - - const: tgiv4 + - const: tciv4 - const: tgiu5 - const: tgiv5 - const: tgiw5 @@ -197,18 +198,18 @@ properties: - const: tgib6 - const: tgic6 - const: tgid6 - - const: tgiv6 + - const: tciv6 - const: tgia7 - const: tgib7 - const: tgic7 - const: tgid7 - - const: tgiv7 + - const: tciv7 - const: tgia8 - const: tgib8 - const: tgic8 - const: tgid8 - - const: tgiv8 - - const: tgiu8 + - const: tciv8 + - const: tciu8 clocks: maxItems: 1 @@ -285,16 +286,16 @@ examples: <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tgiv0", "tgie0", + interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tciv0", "tgie0", "tgif0", - "tgia1", "tgib1", "tgiv1", "tgiu1", - "tgia2", "tgib2", "tgiv2", "tgiu2", - "tgia3", "tgib3", "tgic3", "tgid3", "tgiv3", - "tgia4", "tgib4", "tgic4", "tgid4", "tgiv4", + "tgia1", "tgib1", "tciv1", "tciu1", + "tgia2", "tgib2", "tciv2", "tciu2", + "tgia3", "tgib3", "tgic3", "tgid3", "tciv3", + "tgia4", "tgib4", "tgic4", "tgid4", "tciv4", "tgiu5", "tgiv5", "tgiw5", - "tgia6", "tgib6", "tgic6", "tgid6", "tgiv6", - "tgia7", "tgib7", "tgic7", "tgid7", "tgiv7", - "tgia8", "tgib8", "tgic8", "tgid8", "tgiv8", "tgiu8"; + "tgia6", "tgib6", "tgic6", "tgid6", "tciv6", + "tgia7", "tgib7", "tgic7", "tgid7", "tciv7", + "tgia8", "tgib8", "tgic8", "tgid8", "tciv8", "tciu8"; clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>; power-domains = <&cpg>; resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>; diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 430a814f64a5..9a1443ec3aaa 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -151,8 +151,6 @@ properties: - infineon,slb9645tt # Infineon SLB9673 I2C TPM 2.0 - infineon,slb9673 - # Infineon TDA38640 Voltage Regulator - - infineon,tda38640 # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor - infineon,tlv493d-a1b6 # Infineon Multi-phase Digital VR Controller xdpe11280 diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml index 291844c8f3e1..c983dfe0f629 100644 --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml @@ -15,7 +15,7 @@ description: Phy documentation is provided in the following places. USB2.0 PHY - Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml + Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml Type-C PHY Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml index 5497a60cddbc..6ab674dea4c6 100644 --- a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml +++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml @@ -32,11 +32,14 @@ properties: items: - const: irq + connector: + $ref: /schemas/connector/usb-connector.yaml# + required: - compatible - reg -additionalProperties: true +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 25fd2dc378f5..3f7624c73ed0 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -805,6 +805,8 @@ patternProperties: description: Mantix Display Technology Co.,Ltd. "^mapleboard,.*": description: Mapleboard.org + "^marantec,.*": + description: Marantec electronics GmbH "^marvell,.*": description: Marvell Technology Group Ltd. "^maxbotix,.*": @@ -871,6 +873,8 @@ patternProperties: description: MiraMEMS Sensing Technology Co., Ltd. "^mitsubishi,.*": description: Mitsubishi Electric Corporation + "^mitsumi,.*": + description: Mitsumi Electric Co., Ltd. "^mixel,.*": description: Mixel, Inc. "^miyoo,.*": diff --git a/Documentation/devicetree/bindings/watchdog/atmel,at91rm9200-wdt.yaml b/Documentation/devicetree/bindings/watchdog/atmel,at91rm9200-wdt.yaml new file mode 100644 index 000000000000..7af3571d89f2 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/atmel,at91rm9200-wdt.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/atmel,at91rm9200-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel AT91RM9200 System Timer Watchdog + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + const: atmel,at91rm9200-wdt + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + watchdog@fffffd00 { + compatible = "atmel,at91rm9200-wdt"; + reg = <0xfffffd00 0x10>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/atmel-at91rm9200-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-at91rm9200-wdt.txt deleted file mode 100644 index d4d86cf8f9eb..000000000000 --- a/Documentation/devicetree/bindings/watchdog/atmel-at91rm9200-wdt.txt +++ /dev/null @@ -1,9 +0,0 @@ -Atmel AT91RM9200 System Timer Watchdog - -Required properties: -- compatible: must be "atmel,at91sam9260-wdt". - -Example: - watchdog@fffffd00 { - compatible = "atmel,at91rm9200-wdt"; - }; diff --git a/Documentation/devicetree/bindings/watchdog/cnxt,cx92755-wdt.yaml b/Documentation/devicetree/bindings/watchdog/cnxt,cx92755-wdt.yaml new file mode 100644 index 000000000000..1844d7e026fe --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/cnxt,cx92755-wdt.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/cnxt,cx92755-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Conexant Digicolor SoCs Watchdog timer + +description: | + The watchdog functionality in Conexant Digicolor SoCs relies on the so called + "Agent Communication" block. This block includes the eight programmable system + timer counters. The first timer (called "Timer A") is the only one that can be + used as watchdog. + +allOf: + - $ref: watchdog.yaml# + +maintainers: + - Baruch Siach <baruch@tkos.co.il> + +properties: + compatible: + const: cnxt,cx92755-wdt + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + watchdog@f0000fc0 { + compatible = "cnxt,cx92755-wdt"; + reg = <0xf0000fc0 0x8>; + clocks = <&main_clk>; + timeout-sec = <15>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt deleted file mode 100644 index 354314d854ef..000000000000 --- a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt +++ /dev/null @@ -1,34 +0,0 @@ -* Dialog Semiconductor DA9062/61 Watchdog Timer - -Required properties: - -- compatible: should be one of the following valid compatible string lines: - "dlg,da9061-watchdog", "dlg,da9062-watchdog" - "dlg,da9062-watchdog" - -Optional properties: -- dlg,use-sw-pm: Add this property to disable the watchdog during suspend. - Only use this option if you can't use the watchdog automatic suspend - function during a suspend (see register CONTROL_B). -- dlg,wdt-sd: Set what happens on watchdog timeout. If this bit is set the - watchdog timeout triggers SHUTDOWN, if cleared the watchdog triggers - POWERDOWN. Can be 0 or 1. Only use this option if you want to change the - default chip's OTP setting for WATCHDOG_SD bit. If this property is NOT - set the WATCHDOG_SD bit and on timeout watchdog behavior will match the - chip's OTP settings. - -Example: DA9062 - - pmic0: da9062@58 { - watchdog { - compatible = "dlg,da9062-watchdog"; - }; - }; - -Example: DA9061 using a fall-back compatible for the DA9062 watchdog driver - - pmic0: da9061@58 { - watchdog { - compatible = "dlg,da9061-watchdog", "dlg,da9062-watchdog"; - }; - }; diff --git a/Documentation/devicetree/bindings/watchdog/digicolor-wdt.txt b/Documentation/devicetree/bindings/watchdog/digicolor-wdt.txt deleted file mode 100644 index a882967e17d4..000000000000 --- a/Documentation/devicetree/bindings/watchdog/digicolor-wdt.txt +++ /dev/null @@ -1,25 +0,0 @@ -Conexant Digicolor SoCs Watchdog timer - -The watchdog functionality in Conexant Digicolor SoCs relies on the so called -"Agent Communication" block. This block includes the eight programmable system -timer counters. The first timer (called "Timer A") is the only one that can be -used as watchdog. - -Required properties: - -- compatible : Should be "cnxt,cx92755-wdt" -- reg : Specifies base physical address and size of the registers -- clocks : phandle; specifies the clock that drives the timer - -Optional properties: - -- timeout-sec : Contains the watchdog timeout in seconds - -Example: - - watchdog@f0000fc0 { - compatible = "cnxt,cx92755-wdt"; - reg = <0xf0000fc0 0x8>; - clocks = <&main_clk>; - timeout-sec = <15>; - }; diff --git a/Documentation/devicetree/bindings/watchdog/dlg,da9062-watchdog.yaml b/Documentation/devicetree/bindings/watchdog/dlg,da9062-watchdog.yaml new file mode 100644 index 000000000000..f058628bb632 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/dlg,da9062-watchdog.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/dlg,da9062-watchdog.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog Semiconductor DA9062/61 Watchdog Timer + +maintainers: + - Steve Twiss <stwiss.opensource@diasemi.com> + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + enum: + - dlg,da9061-watchdog + - dlg,da9062-watchdog + + dlg,use-sw-pm: + type: boolean + description: + Add this property to disable the watchdog during suspend. + Only use this option if you can't use the watchdog automatic suspend + function during a suspend (see register CONTROL_B). + + dlg,wdt-sd: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + Set what happens on watchdog timeout. If this bit is set the + watchdog timeout triggers SHUTDOWN, if cleared the watchdog triggers + POWERDOWN. Can be 0 or 1. Only use this option if you want to change the + default chip's OTP setting for WATCHDOG_SD bit. If this property is NOT + set the WATCHDOG_SD bit and on timeout watchdog behavior will match the + chip's OTP settings. + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + watchdog { + compatible = "dlg,da9062-watchdog"; + dlg,use-sw-pm; + dlg,wdt-sd = <1>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml index 47701248cd8d..8b7aa922249b 100644 --- a/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml @@ -18,7 +18,9 @@ allOf: properties: compatible: items: - - const: fsl,imx8qxp-sc-wdt + - enum: + - fsl,imx8dxl-sc-wdt + - fsl,imx8qxp-sc-wdt - const: fsl,imx-sc-wdt required: diff --git a/Documentation/devicetree/bindings/writing-schema.rst b/Documentation/devicetree/bindings/writing-schema.rst index 4a381d20f2b4..0a6cf19a1459 100644 --- a/Documentation/devicetree/bindings/writing-schema.rst +++ b/Documentation/devicetree/bindings/writing-schema.rst @@ -159,11 +159,14 @@ It is possible to run both in a single command:: make dt_binding_check dtbs_check It is also possible to run checks with a subset of matching schema files by -setting the ``DT_SCHEMA_FILES`` variable to a specific schema file or pattern. +setting the ``DT_SCHEMA_FILES`` variable to 1 or more specific schema files or +patterns (partial match of a fixed string). Each file or pattern should be +separated by ':'. :: make dt_binding_check DT_SCHEMA_FILES=trivial-devices.yaml + make dt_binding_check DT_SCHEMA_FILES=trivial-devices.yaml:rtc.yaml make dt_binding_check DT_SCHEMA_FILES=/gpio/ make dtbs_check DT_SCHEMA_FILES=trivial-devices.yaml |