summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/dma/atmel-xdma.txt54
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt1
-rw-r--r--Documentation/devicetree/bindings/dma/qcom_bam_dma.txt4
-rw-r--r--Documentation/devicetree/bindings/dma/sun6i-dma.txt2
4 files changed, 59 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/dma/atmel-xdma.txt b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
new file mode 100644
index 000000000000..0eb2b3207e08
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
@@ -0,0 +1,54 @@
+* Atmel Extensible Direct Memory Access Controller (XDMAC)
+
+* XDMA Controller
+Required properties:
+- compatible: Should be "atmel,<chip>-dma".
+ <chip> compatible description:
+ - sama5d4: first SoC adding the XDMAC
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain DMA interrupt.
+- #dma-cells: Must be <1>, used to represent the number of integer cells in
+the dmas property of client devices.
+ - The 1st cell specifies the channel configuration register:
+ - bit 13: SIF, source interface identifier, used to get the memory
+ interface identifier,
+ - bit 14: DIF, destination interface identifier, used to get the peripheral
+ interface identifier,
+ - bit 30-24: PERID, peripheral identifier.
+
+Example:
+
+dma1: dma-controller@f0004000 {
+ compatible = "atmel,sama5d4-dma";
+ reg = <0xf0004000 0x200>;
+ interrupts = <50 4 0>;
+ #dma-cells = <1>;
+};
+
+
+* DMA clients
+DMA clients connected to the Atmel XDMA controller must use the format
+described in the dma.txt file, using a one-cell specifier for each channel.
+The two cells in order are:
+1. A phandle pointing to the DMA controller.
+2. Channel configuration register. Configurable fields are:
+ - bit 13: SIF, source interface identifier, used to get the memory
+ interface identifier,
+ - bit 14: DIF, destination interface identifier, used to get the peripheral
+ interface identifier,
+ - bit 30-24: PERID, peripheral identifier.
+
+Example:
+
+i2c2: i2c@f8024000 {
+ compatible = "atmel,at91sam9x5-i2c";
+ reg = <0xf8024000 0x4000>;
+ interrupts = <34 4 6>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(6))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(7))>;
+ dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index 4659fd952301..dc8d3aac1aa9 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -48,6 +48,7 @@ The full ID of peripheral types can be found below.
21 ESAI
22 SSI Dual FIFO (needs firmware ver >= 2)
23 Shared ASRC
+ 24 SAI
The third cell specifies the transfer priority as below.
diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
index d75a9d767022..f8c3311b7153 100644
--- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
+++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
@@ -1,7 +1,9 @@
QCOM BAM DMA controller
Required properties:
-- compatible: must contain "qcom,bam-v1.4.0" for MSM8974
+- compatible: must be one of the following:
+ * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084
+ * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960
- reg: Address range for DMA registers
- interrupts: Should contain the one interrupt shared by all channels
- #dma-cells: must be <1>, the cell in the dmas property of the client device
diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
index 3e145c1675b1..9cdcba24d7c3 100644
--- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt
+++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
@@ -4,7 +4,7 @@ This driver follows the generic DMA bindings defined in dma.txt.
Required properties:
-- compatible: Must be "allwinner,sun6i-a31-dma"
+- compatible: Must be "allwinner,sun6i-a31-dma" or "allwinner,sun8i-a23-dma"
- reg: Should contain the registers base address and length
- interrupts: Should contain a reference to the interrupt used by this device
- clocks: Should contain a reference to the parent AHB clock