diff options
Diffstat (limited to 'Documentation/filesystems')
| -rw-r--r-- | Documentation/filesystems/erofs.rst | 64 | ||||
| -rw-r--r-- | Documentation/filesystems/locking.rst | 22 | ||||
| -rw-r--r-- | Documentation/filesystems/nfs/client-identifier.rst | 216 | ||||
| -rw-r--r-- | Documentation/filesystems/nfs/index.rst | 2 | ||||
| -rw-r--r-- | Documentation/filesystems/proc.rst | 154 | ||||
| -rw-r--r-- | Documentation/filesystems/vfs.rst | 17 |
6 files changed, 386 insertions, 89 deletions
diff --git a/Documentation/filesystems/erofs.rst b/Documentation/filesystems/erofs.rst index bef6d3040ce4..05e03d54af1a 100644 --- a/Documentation/filesystems/erofs.rst +++ b/Documentation/filesystems/erofs.rst @@ -1,63 +1,82 @@ .. SPDX-License-Identifier: GPL-2.0 ====================================== -Enhanced Read-Only File System - EROFS +EROFS - Enhanced Read-Only File System ====================================== Overview ======== -EROFS file-system stands for Enhanced Read-Only File System. Different -from other read-only file systems, it aims to be designed for flexibility, -scalability, but be kept simple and high performance. +EROFS filesystem stands for Enhanced Read-Only File System. It aims to form a +generic read-only filesystem solution for various read-only use cases instead +of just focusing on storage space saving without considering any side effects +of runtime performance. -It is designed as a better filesystem solution for the following scenarios: +It is designed to meet the needs of flexibility, feature extendability and user +payload friendly, etc. Apart from those, it is still kept as a simple +random-access friendly high-performance filesystem to get rid of unneeded I/O +amplification and memory-resident overhead compared to similar approaches. + +It is implemented to be a better choice for the following scenarios: - read-only storage media or - part of a fully trusted read-only solution, which means it needs to be immutable and bit-for-bit identical to the official golden image for - their releases due to security and other considerations and + their releases due to security or other considerations and - hope to minimize extra storage space with guaranteed end-to-end performance by using compact layout, transparent file compression and direct access, especially for those embedded devices with limited memory and high-density - hosts with numerous containers; + hosts with numerous containers. Here is the main features of EROFS: - Little endian on-disk design; - - Currently 4KB block size (nobh) and therefore maximum 16TB address space; - - - Metadata & data could be mixed by design; + - 4KiB block size and 32-bit block addresses, therefore 16TiB address space + at most for now; - - 2 inode versions for different requirements: + - Two inode layouts for different requirements: - ===================== ============ ===================================== + ===================== ============ ====================================== compact (v1) extended (v2) - ===================== ============ ===================================== + ===================== ============ ====================================== Inode metadata size 32 bytes 64 bytes - Max file size 4 GB 16 EB (also limited by max. vol size) + Max file size 4 GiB 16 EiB (also limited by max. vol size) Max uids/gids 65536 4294967296 Per-inode timestamp no yes (64 + 32-bit timestamp) Max hardlinks 65536 4294967296 - Metadata reserved 4 bytes 14 bytes - ===================== ============ ===================================== + Metadata reserved 8 bytes 18 bytes + ===================== ============ ====================================== + + - Metadata and data could be mixed as an option; - Support extended attributes (xattrs) as an option; - - Support xattr inline and tail-end data inline for all files; + - Support tailpacking data and xattr inline compared to byte-addressed + unaligned metadata or smaller block size alternatives; - Support POSIX.1e ACLs by using xattrs; - Support transparent data compression as an option: - LZ4 algorithm with the fixed-sized output compression for high performance; + LZ4 and MicroLZMA algorithms can be used on a per-file basis; In addition, + inplace decompression is also supported to avoid bounce compressed buffers + and page cache thrashing. + + - Support direct I/O on uncompressed files to avoid double caching for loop + devices; - - Multiple device support for multi-layer container images. + - Support FSDAX on uncompressed images for secure containers and ramdisks in + order to get rid of unnecessary page cache. + + - Support multiple devices for multi blob container images; + + - Support file-based on-demand loading with the Fscache infrastructure. The following git tree provides the file system user-space tools under -development (ex, formatting tool mkfs.erofs): +development, such as a formatting tool (mkfs.erofs), an on-disk consistency & +compatibility checking tool (fsck.erofs), and a debugging tool (dump.erofs): - git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs-utils.git @@ -91,6 +110,7 @@ dax={always,never} Use direct access (no page cache). See Documentation/filesystems/dax.rst. dax A legacy option which is an alias for ``dax=always``. device=%s Specify a path to an extra device to be used together. +fsid=%s Specify a filesystem image ID for Fscache back-end. =================== ========================================================= Sysfs Entries @@ -226,8 +246,8 @@ Note that apart from the offset of the first filename, nameoff0 also indicates the total number of directory entries in this block since it is no need to introduce another on-disk field at all. -Chunk-based file ----------------- +Chunk-based files +----------------- In order to support chunk-based data deduplication, a new inode data layout has been supported since Linux v5.15: Files are split in equal-sized data chunks with ``extents`` area of the inode metadata indicating how to get the chunk diff --git a/Documentation/filesystems/locking.rst b/Documentation/filesystems/locking.rst index 515bc48ab58b..c0fe711f14d3 100644 --- a/Documentation/filesystems/locking.rst +++ b/Documentation/filesystems/locking.rst @@ -258,8 +258,9 @@ prototypes:: int (*launder_folio)(struct folio *); bool (*is_partially_uptodate)(struct folio *, size_t from, size_t count); int (*error_remove_page)(struct address_space *, struct page *); - int (*swap_activate)(struct file *); + int (*swap_activate)(struct swap_info_struct *sis, struct file *f, sector_t *span) int (*swap_deactivate)(struct file *); + int (*swap_rw)(struct kiocb *iocb, struct iov_iter *iter); locking rules: All except dirty_folio and free_folio may block @@ -287,6 +288,7 @@ is_partially_uptodate: yes error_remove_page: yes swap_activate: no swap_deactivate: no +swap_rw: yes, unlocks ====================== ======================== ========= =============== ->write_begin(), ->write_end() and ->read_folio() may be called from @@ -386,15 +388,19 @@ cleaned, or an error value if not. Note that in order to prevent the folio getting mapped back in and redirtied, it needs to be kept locked across the entire operation. -->swap_activate will be called with a non-zero argument on -files backing (non block device backed) swapfiles. A return value -of zero indicates success, in which case this file can be used for -backing swapspace. The swapspace operations will be proxied to the -address space operations. +->swap_activate() will be called to prepare the given file for swap. It +should perform any validation and preparation necessary to ensure that +writes can be performed with minimal memory allocation. It should call +add_swap_extent(), or the helper iomap_swapfile_activate(), and return +the number of extents added. If IO should be submitted through +->swap_rw(), it should set SWP_FS_OPS, otherwise IO will be submitted +directly to the block device ``sis->bdev``. ->swap_deactivate() will be called in the sys_swapoff() path after ->swap_activate() returned success. +->swap_rw will be called for swap IO if SWP_FS_OPS was set by ->swap_activate(). + file_lock_operations ==================== @@ -428,6 +434,8 @@ prototypes:: void (*lm_break)(struct file_lock *); /* break_lease callback */ int (*lm_change)(struct file_lock **, int); bool (*lm_breaker_owns_lease)(struct file_lock *); + bool (*lm_lock_expirable)(struct file_lock *); + void (*lm_expire_lock)(void); locking rules: @@ -439,6 +447,8 @@ lm_grant: no no no lm_break: yes no no lm_change yes no no lm_breaker_owns_lease: yes no no +lm_lock_expirable yes no no +lm_expire_lock no no yes ====================== ============= ================= ========= buffer_head diff --git a/Documentation/filesystems/nfs/client-identifier.rst b/Documentation/filesystems/nfs/client-identifier.rst new file mode 100644 index 000000000000..5147e15815a1 --- /dev/null +++ b/Documentation/filesystems/nfs/client-identifier.rst @@ -0,0 +1,216 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================= +NFSv4 client identifier +======================= + +This document explains how the NFSv4 protocol identifies client +instances in order to maintain file open and lock state during +system restarts. A special identifier and principal are maintained +on each client. These can be set by administrators, scripts +provided by site administrators, or tools provided by Linux +distributors. + +There are risks if a client's NFSv4 identifier and its principal +are not chosen carefully. + + +Introduction +------------ + +The NFSv4 protocol uses "lease-based file locking". Leases help +NFSv4 servers provide file lock guarantees and manage their +resources. + +Simply put, an NFSv4 server creates a lease for each NFSv4 client. +The server collects each client's file open and lock state under +the lease for that client. + +The client is responsible for periodically renewing its leases. +While a lease remains valid, the server holding that lease +guarantees the file locks the client has created remain in place. + +If a client stops renewing its lease (for example, if it crashes), +the NFSv4 protocol allows the server to remove the client's open +and lock state after a certain period of time. When a client +restarts, it indicates to servers that open and lock state +associated with its previous leases is no longer valid and can be +destroyed immediately. + +In addition, each NFSv4 server manages a persistent list of client +leases. When the server restarts and clients attempt to recover +their state, the server uses this list to distinguish amongst +clients that held state before the server restarted and clients +sending fresh OPEN and LOCK requests. This enables file locks to +persist safely across server restarts. + +NFSv4 client identifiers +------------------------ + +Each NFSv4 client presents an identifier to NFSv4 servers so that +they can associate the client with its lease. Each client's +identifier consists of two elements: + + - co_ownerid: An arbitrary but fixed string. + + - boot verifier: A 64-bit incarnation verifier that enables a + server to distinguish successive boot epochs of the same client. + +The NFSv4.0 specification refers to these two items as an +"nfs_client_id4". The NFSv4.1 specification refers to these two +items as a "client_owner4". + +NFSv4 servers tie this identifier to the principal and security +flavor that the client used when presenting it. Servers use this +principal to authorize subsequent lease modification operations +sent by the client. Effectively this principal is a third element of +the identifier. + +As part of the identity presented to servers, a good +"co_ownerid" string has several important properties: + + - The "co_ownerid" string identifies the client during reboot + recovery, therefore the string is persistent across client + reboots. + - The "co_ownerid" string helps servers distinguish the client + from others, therefore the string is globally unique. Note + that there is no central authority that assigns "co_ownerid" + strings. + - Because it often appears on the network in the clear, the + "co_ownerid" string does not reveal private information about + the client itself. + - The content of the "co_ownerid" string is set and unchanging + before the client attempts NFSv4 mounts after a restart. + - The NFSv4 protocol places a 1024-byte limit on the size of the + "co_ownerid" string. + +Protecting NFSv4 lease state +---------------------------- + +NFSv4 servers utilize the "client_owner4" as described above to +assign a unique lease to each client. Under this scheme, there are +circumstances where clients can interfere with each other. This is +referred to as "lease stealing". + +If distinct clients present the same "co_ownerid" string and use +the same principal (for example, AUTH_SYS and UID 0), a server is +unable to tell that the clients are not the same. Each distinct +client presents a different boot verifier, so it appears to the +server as if there is one client that is rebooting frequently. +Neither client can maintain open or lock state in this scenario. + +If distinct clients present the same "co_ownerid" string and use +distinct principals, the server is likely to allow the first client +to operate normally but reject subsequent clients with the same +"co_ownerid" string. + +If a client's "co_ownerid" string or principal are not stable, +state recovery after a server or client reboot is not guaranteed. +If a client unexpectedly restarts but presents a different +"co_ownerid" string or principal to the server, the server orphans +the client's previous open and lock state. This blocks access to +locked files until the server removes the orphaned state. + +If the server restarts and a client presents a changed "co_ownerid" +string or principal to the server, the server will not allow the +client to reclaim its open and lock state, and may give those locks +to other clients in the meantime. This is referred to as "lock +stealing". + +Lease stealing and lock stealing increase the potential for denial +of service and in rare cases even data corruption. + +Selecting an appropriate client identifier +------------------------------------------ + +By default, the Linux NFSv4 client implementation constructs its +"co_ownerid" string starting with the words "Linux NFS" followed by +the client's UTS node name (the same node name, incidentally, that +is used as the "machine name" in an AUTH_SYS credential). In small +deployments, this construction is usually adequate. Often, however, +the node name by itself is not adequately unique, and can change +unexpectedly. Problematic situations include: + + - NFS-root (diskless) clients, where the local DCHP server (or + equivalent) does not provide a unique host name. + + - "Containers" within a single Linux host. If each container has + a separate network namespace, but does not use the UTS namespace + to provide a unique host name, then there can be multiple NFS + client instances with the same host name. + + - Clients across multiple administrative domains that access a + common NFS server. If hostnames are not assigned centrally + then uniqueness cannot be guaranteed unless a domain name is + included in the hostname. + +Linux provides two mechanisms to add uniqueness to its "co_ownerid" +string: + + nfs.nfs4_unique_id + This module parameter can set an arbitrary uniquifier string + via the kernel command line, or when the "nfs" module is + loaded. + + /sys/fs/nfs/client/net/identifier + This virtual file, available since Linux 5.3, is local to the + network namespace in which it is accessed and so can provide + distinction between network namespaces (containers) when the + hostname remains uniform. + +Note that this file is empty on name-space creation. If the +container system has access to some sort of per-container identity +then that uniquifier can be used. For example, a uniquifier might +be formed at boot using the container's internal identifier: + + sha256sum /etc/machine-id | awk '{print $1}' \\ + > /sys/fs/nfs/client/net/identifier + +Security considerations +----------------------- + +The use of cryptographic security for lease management operations +is strongly encouraged. + +If NFS with Kerberos is not configured, a Linux NFSv4 client uses +AUTH_SYS and UID 0 as the principal part of its client identity. +This configuration is not only insecure, it increases the risk of +lease and lock stealing. However, it might be the only choice for +client configurations that have no local persistent storage. +"co_ownerid" string uniqueness and persistence is critical in this +case. + +When a Kerberos keytab is present on a Linux NFS client, the client +attempts to use one of the principals in that keytab when +identifying itself to servers. The "sec=" mount option does not +control this behavior. Alternately, a single-user client with a +Kerberos principal can use that principal in place of the client's +host principal. + +Using Kerberos for this purpose enables the client and server to +use the same lease for operations covered by all "sec=" settings. +Additionally, the Linux NFS client uses the RPCSEC_GSS security +flavor with Kerberos and the integrity QOS to prevent in-transit +modification of lease modification requests. + +Additional notes +---------------- +The Linux NFSv4 client establishes a single lease on each NFSv4 +server it accesses. NFSv4 mounts from a Linux NFSv4 client of a +particular server then share that lease. + +Once a client establishes open and lock state, the NFSv4 protocol +enables lease state to transition to other servers, following data +that has been migrated. This hides data migration completely from +running applications. The Linux NFSv4 client facilitates state +migration by presenting the same "client_owner4" to all servers it +encounters. + +======== +See Also +======== + + - nfs(5) + - kerberos(7) + - RFC 7530 for the NFSv4.0 specification + - RFC 8881 for the NFSv4.1 specification. diff --git a/Documentation/filesystems/nfs/index.rst b/Documentation/filesystems/nfs/index.rst index 288d8ddb2bc6..8536134f31fd 100644 --- a/Documentation/filesystems/nfs/index.rst +++ b/Documentation/filesystems/nfs/index.rst @@ -6,6 +6,8 @@ NFS .. toctree:: :maxdepth: 1 + client-identifier + exporting pnfs rpc-cache rpc-server-gss diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst index 6a0dd99786f9..1bc91fb8c321 100644 --- a/Documentation/filesystems/proc.rst +++ b/Documentation/filesystems/proc.rst @@ -942,56 +942,73 @@ can be substantial. In many cases there are other means to find out additional memory using subsystem specific interfaces, for instance /proc/net/sockstat for TCP memory allocations. -The following is from a 16GB PIII, which has highmem enabled. -You may not have all of these fields. +Example output. You may not have all of these fields. :: > cat /proc/meminfo - MemTotal: 16344972 kB - MemFree: 13634064 kB - MemAvailable: 14836172 kB - Buffers: 3656 kB - Cached: 1195708 kB - SwapCached: 0 kB - Active: 891636 kB - Inactive: 1077224 kB - HighTotal: 15597528 kB - HighFree: 13629632 kB - LowTotal: 747444 kB - LowFree: 4432 kB - SwapTotal: 0 kB - SwapFree: 0 kB - Dirty: 968 kB - Writeback: 0 kB - AnonPages: 861800 kB - Mapped: 280372 kB - Shmem: 644 kB - KReclaimable: 168048 kB - Slab: 284364 kB - SReclaimable: 159856 kB - SUnreclaim: 124508 kB - PageTables: 24448 kB - NFS_Unstable: 0 kB - Bounce: 0 kB - WritebackTmp: 0 kB - CommitLimit: 7669796 kB - Committed_AS: 100056 kB - VmallocTotal: 112216 kB - VmallocUsed: 428 kB - VmallocChunk: 111088 kB - Percpu: 62080 kB - HardwareCorrupted: 0 kB - AnonHugePages: 49152 kB - ShmemHugePages: 0 kB - ShmemPmdMapped: 0 kB + MemTotal: 32858820 kB + MemFree: 21001236 kB + MemAvailable: 27214312 kB + Buffers: 581092 kB + Cached: 5587612 kB + SwapCached: 0 kB + Active: 3237152 kB + Inactive: 7586256 kB + Active(anon): 94064 kB + Inactive(anon): 4570616 kB + Active(file): 3143088 kB + Inactive(file): 3015640 kB + Unevictable: 0 kB + Mlocked: 0 kB + SwapTotal: 0 kB + SwapFree: 0 kB + Zswap: 1904 kB + Zswapped: 7792 kB + Dirty: 12 kB + Writeback: 0 kB + AnonPages: 4654780 kB + Mapped: 266244 kB + Shmem: 9976 kB + KReclaimable: 517708 kB + Slab: 660044 kB + SReclaimable: 517708 kB + SUnreclaim: 142336 kB + KernelStack: 11168 kB + PageTables: 20540 kB + NFS_Unstable: 0 kB + Bounce: 0 kB + WritebackTmp: 0 kB + CommitLimit: 16429408 kB + Committed_AS: 7715148 kB + VmallocTotal: 34359738367 kB + VmallocUsed: 40444 kB + VmallocChunk: 0 kB + Percpu: 29312 kB + HardwareCorrupted: 0 kB + AnonHugePages: 4149248 kB + ShmemHugePages: 0 kB + ShmemPmdMapped: 0 kB + FileHugePages: 0 kB + FilePmdMapped: 0 kB + CmaTotal: 0 kB + CmaFree: 0 kB + HugePages_Total: 0 + HugePages_Free: 0 + HugePages_Rsvd: 0 + HugePages_Surp: 0 + Hugepagesize: 2048 kB + Hugetlb: 0 kB + DirectMap4k: 401152 kB + DirectMap2M: 10008576 kB + DirectMap1G: 24117248 kB MemTotal Total usable RAM (i.e. physical RAM minus a few reserved bits and the kernel binary code) MemFree - The sum of LowFree+HighFree + Total free RAM. On highmem systems, the sum of LowFree+HighFree MemAvailable An estimate of how much memory is available for starting new applications, without swapping. Calculated from MemFree, @@ -1005,8 +1022,9 @@ Buffers Relatively temporary storage for raw disk blocks shouldn't get tremendously large (20MB or so) Cached - in-memory cache for files read from the disk (the - pagecache). Doesn't include SwapCached + In-memory cache for files read from the disk (the + pagecache) as well as tmpfs & shmem. + Doesn't include SwapCached. SwapCached Memory that once was swapped out, is swapped back in but still also is in the swapfile (if memory is needed it @@ -1018,6 +1036,11 @@ Active Inactive Memory which has been less recently used. It is more eligible to be reclaimed for other purposes +Unevictable + Memory allocated for userspace which cannot be reclaimed, such + as mlocked pages, ramfs backing pages, secret memfd pages etc. +Mlocked + Memory locked with mlock(). HighTotal, HighFree Highmem is all memory above ~860MB of physical memory. Highmem areas are for use by userspace programs, or @@ -1034,26 +1057,20 @@ SwapTotal SwapFree Memory which has been evicted from RAM, and is temporarily on the disk +Zswap + Memory consumed by the zswap backend (compressed size) +Zswapped + Amount of anonymous memory stored in zswap (original size) Dirty Memory which is waiting to get written back to the disk Writeback Memory which is actively being written back to the disk AnonPages Non-file backed pages mapped into userspace page tables -HardwareCorrupted - The amount of RAM/memory in KB, the kernel identifies as - corrupted. -AnonHugePages - Non-file backed huge pages mapped into userspace page tables Mapped files which have been mmaped, such as libraries Shmem Total memory used by shared memory (shmem) and tmpfs -ShmemHugePages - Memory used by shared memory (shmem) and tmpfs allocated - with huge pages -ShmemPmdMapped - Shared memory mapped into userspace with huge pages KReclaimable Kernel allocations that the kernel will attempt to reclaim under memory pressure. Includes SReclaimable (below), and other @@ -1064,9 +1081,10 @@ SReclaimable Part of Slab, that might be reclaimed, such as caches SUnreclaim Part of Slab, that cannot be reclaimed on memory pressure +KernelStack + Memory consumed by the kernel stacks of all tasks PageTables - amount of memory dedicated to the lowest level of page - tables. + Memory consumed by userspace page tables NFS_Unstable Always zero. Previous counted pages which had been written to the server, but has not been committed to stable storage. @@ -1098,7 +1116,7 @@ Committed_AS has been allocated by processes, even if it has not been "used" by them as of yet. A process which malloc()'s 1G of memory, but only touches 300M of it will show up as - using 1G. This 1G is memory which has been "committed" to + using 1G. This 1G is memory which has been "committed" to by the VM and can be used at any time by the allocating application. With strict overcommit enabled on the system (mode 2 in 'vm.overcommit_memory'), allocations which would @@ -1107,7 +1125,7 @@ Committed_AS not fail due to lack of memory once that memory has been successfully allocated. VmallocTotal - total size of vmalloc memory area + total size of vmalloc virtual address space VmallocUsed amount of vmalloc area which is used VmallocChunk @@ -1115,6 +1133,30 @@ VmallocChunk Percpu Memory allocated to the percpu allocator used to back percpu allocations. This stat excludes the cost of metadata. +HardwareCorrupted + The amount of RAM/memory in KB, the kernel identifies as + corrupted. +AnonHugePages + Non-file backed huge pages mapped into userspace page tables +ShmemHugePages + Memory used by shared memory (shmem) and tmpfs allocated + with huge pages +ShmemPmdMapped + Shared memory mapped into userspace with huge pages +FileHugePages + Memory used for filesystem data (page cache) allocated + with huge pages +FilePmdMapped + Page cache mapped into userspace with huge pages +CmaTotal + Memory reserved for the Contiguous Memory Allocator (CMA) +CmaFree + Free remaining memory in the CMA reserves +HugePages_Total, HugePages_Free, HugePages_Rsvd, HugePages_Surp, Hugepagesize, Hugetlb + See Documentation/admin-guide/mm/hugetlbpage.rst. +DirectMap4k, DirectMap2M, DirectMap1G + Breakdown of page table sizes used in the kernel's + identity mapping of RAM vmallocinfo ~~~~~~~~~~~ diff --git a/Documentation/filesystems/vfs.rst b/Documentation/filesystems/vfs.rst index 12a011d2cbc6..08069ecd49a6 100644 --- a/Documentation/filesystems/vfs.rst +++ b/Documentation/filesystems/vfs.rst @@ -749,8 +749,9 @@ cache in your filesystem. The following members are defined: size_t count); void (*is_dirty_writeback)(struct folio *, bool *, bool *); int (*error_remove_page) (struct mapping *mapping, struct page *page); - int (*swap_activate)(struct file *); + int (*swap_activate)(struct swap_info_struct *sis, struct file *f, sector_t *span) int (*swap_deactivate)(struct file *); + int (*swap_rw)(struct kiocb *iocb, struct iov_iter *iter); }; ``writepage`` @@ -948,15 +949,21 @@ cache in your filesystem. The following members are defined: unless you have them locked or reference counts increased. ``swap_activate`` - Called when swapon is used on a file to allocate space if - necessary and pin the block lookup information in memory. A - return value of zero indicates success, in which case this file - can be used to back swapspace. + + Called to prepare the given file for swap. It should perform + any validation and preparation necessary to ensure that writes + can be performed with minimal memory allocation. It should call + add_swap_extent(), or the helper iomap_swapfile_activate(), and + return the number of extents added. If IO should be submitted + through ->swap_rw(), it should set SWP_FS_OPS, otherwise IO will + be submitted directly to the block device ``sis->bdev``. ``swap_deactivate`` Called during swapoff on files where swap_activate was successful. +``swap_rw`` + Called to read or write swap pages when SWP_FS_OPS is set. The File Object =============== |