diff options
Diffstat (limited to 'Documentation/networking')
| -rw-r--r-- | Documentation/networking/dsa/dsa.txt | 24 | ||||
| -rw-r--r-- | Documentation/networking/ip-sysctl.txt | 47 | ||||
| -rw-r--r-- | Documentation/networking/mpls-sysctl.txt | 4 | ||||
| -rw-r--r-- | Documentation/networking/packet_mmap.txt | 9 | ||||
| -rw-r--r-- | Documentation/networking/regulatory.txt | 8 | ||||
| -rw-r--r-- | Documentation/networking/vrf.txt | 7 |
6 files changed, 38 insertions, 61 deletions
diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt index 63912ef34606..b8b40753133e 100644 --- a/Documentation/networking/dsa/dsa.txt +++ b/Documentation/networking/dsa/dsa.txt @@ -295,7 +295,6 @@ DSA currently leverages the following subsystems: - MDIO/PHY library: drivers/net/phy/phy.c, mdio_bus.c - Switchdev: net/switchdev/* - Device Tree for various of_* functions -- HWMON: drivers/hwmon/* MDIO/PHY library ---------------- @@ -349,12 +348,6 @@ Documentation/devicetree/bindings/net/dsa/dsa.txt. PHY/MDIO library helper functions such as of_get_phy_mode(), of_phy_connect() are also used to query per-port PHY specific details: interface connection, MDIO bus location etc.. -HWMON ------ - -Some switch drivers feature internal temperature sensors which are exposed as -regular HWMON devices in /sys/class/hwmon/. - Driver development ================== @@ -495,23 +488,6 @@ Power management BR_STATE_DISABLED and propagating changes to the hardware if this port is disabled while being a bridge member -Hardware monitoring -------------------- - -These callbacks are only available if CONFIG_NET_DSA_HWMON is enabled: - -- get_temp: this function queries the given switch for its temperature - -- get_temp_limit: this function returns the switch current maximum temperature - limit - -- set_temp_limit: this function configures the maximum temperature limit allowed - -- get_temp_alarm: this function returns the critical temperature threshold - returning an alarm notification - -See Documentation/hwmon/sysfs-interface for details. - Bridge layer ------------ diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 7dd65c9cf707..fc73eeb7b3b8 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -246,21 +246,12 @@ tcp_dsack - BOOLEAN Allows TCP to send "duplicate" SACKs. tcp_early_retrans - INTEGER - Enable Early Retransmit (ER), per RFC 5827. ER lowers the threshold - for triggering fast retransmit when the amount of outstanding data is - small and when no previously unsent data can be transmitted (such - that limited transmit could be used). Also controls the use of - Tail loss probe (TLP) that converts RTOs occurring due to tail - losses into fast recovery (draft-dukkipati-tcpm-tcp-loss-probe-01). + Tail loss probe (TLP) converts RTOs occurring due to tail + losses into fast recovery (draft-ietf-tcpm-rack). Note that + TLP requires RACK to function properly (see tcp_recovery below) Possible values: - 0 disables ER - 1 enables ER - 2 enables ER but delays fast recovery and fast retransmit - by a fourth of RTT. This mitigates connection falsely - recovers when network has a small degree of reordering - (less than 3 packets). - 3 enables delayed ER and TLP. - 4 enables TLP only. + 0 disables TLP + 3 or 4 enables TLP Default: 3 tcp_ecn - INTEGER @@ -712,18 +703,6 @@ tcp_thin_linear_timeouts - BOOLEAN Documentation/networking/tcp-thin.txt Default: 0 -tcp_thin_dupack - BOOLEAN - Enable dynamic triggering of retransmissions after one dupACK - for thin streams. If set, a check is performed upon reception - of a dupACK to determine if the stream is thin (less than 4 - packets in flight). As long as the stream is found to be thin, - data is retransmitted on the first received dupACK. This - improves retransmission latency for non-aggressive thin - streams, often found to be time-dependent. - For more information on thin streams, see - Documentation/networking/tcp-thin.txt - Default: 0 - tcp_limit_output_bytes - INTEGER Controls TCP Small Queue limit per tcp socket. TCP bulk sender tends to increase packets in flight until it @@ -742,6 +721,13 @@ tcp_challenge_ack_limit - INTEGER UDP variables: +udp_l3mdev_accept - BOOLEAN + Enabling this option allows a "global" bound socket to work + across L3 master domains (e.g., VRFs) with packets capable of + being received regardless of the L3 domain in which they + originated. Only valid when the kernel was compiled with + CONFIG_NET_L3_MASTER_DEV. + udp_mem - vector of 3 INTEGERs: min, pressure, max Number of pages allowed for queueing by all UDP sockets. @@ -843,6 +829,15 @@ ip_local_reserved_ports - list of comma separated ranges Default: Empty +ip_unprivileged_port_start - INTEGER + This is a per-namespace sysctl. It defines the first + unprivileged port in the network namespace. Privileged ports + require root or CAP_NET_BIND_SERVICE in order to bind to them. + To disable all privileged ports, set this to 0. It may not + overlap with the ip_local_reserved_ports range. + + Default: 1024 + ip_nonlocal_bind - BOOLEAN If set, allows processes to bind() to non-local IP addresses, which can be quite useful - but may break some applications. diff --git a/Documentation/networking/mpls-sysctl.txt b/Documentation/networking/mpls-sysctl.txt index 9ed15f86c17c..15d8d16934fd 100644 --- a/Documentation/networking/mpls-sysctl.txt +++ b/Documentation/networking/mpls-sysctl.txt @@ -5,8 +5,8 @@ platform_labels - INTEGER possible to configure forwarding for label values equal to or greater than the number of platform labels. - A dense utliziation of the entries in the platform label table - is possible and expected aas the platform labels are locally + A dense utilization of the entries in the platform label table + is possible and expected as the platform labels are locally allocated. If the number of platform label table entries is set to 0 no diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt index daa015af16a0..f3b9e507ab05 100644 --- a/Documentation/networking/packet_mmap.txt +++ b/Documentation/networking/packet_mmap.txt @@ -565,7 +565,7 @@ TPACKET_V1 --> TPACKET_V2: (void *)hdr + TPACKET_ALIGN(sizeof(struct tpacket_hdr)) TPACKET_V2 --> TPACKET_V3: - - Flexible buffer implementation: + - Flexible buffer implementation for RX_RING: 1. Blocks can be configured with non-static frame-size 2. Read/poll is at a block-level (as opposed to packet-level) 3. Added poll timeout to avoid indefinite user-space wait @@ -574,7 +574,12 @@ TPACKET_V2 --> TPACKET_V3: 4.1 block::timeout 4.2 tpkt_hdr::sk_rxhash - RX Hash data available in user space - - Currently only RX_RING available + - TX_RING semantics are conceptually similar to TPACKET_V2; + use tpacket3_hdr instead of tpacket2_hdr, and TPACKET3_HDRLEN + instead of TPACKET2_HDRLEN. In the current implementation, + the tp_next_offset field in the tpacket3_hdr MUST be set to + zero, indicating that the ring does not hold variable sized frames. + Packets with non-zero values of tp_next_offset will be dropped. ------------------------------------------------------------------------------- + AF_PACKET fanout mode diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt index 356f791af574..7818b5fe448b 100644 --- a/Documentation/networking/regulatory.txt +++ b/Documentation/networking/regulatory.txt @@ -156,12 +156,12 @@ struct ieee80211_regdomain mydriver_jp_regdom = { //.alpha2 = "99", /* If I have no alpha2 to map it to */ .reg_rules = { /* IEEE 802.11b/g, channels 1..14 */ - REG_RULE(2412-20, 2484+20, 40, 6, 20, 0), + REG_RULE(2412-10, 2484+10, 40, 6, 20, 0), /* IEEE 802.11a, channels 34..48 */ - REG_RULE(5170-20, 5240+20, 40, 6, 20, + REG_RULE(5170-10, 5240+10, 40, 6, 20, NL80211_RRF_NO_IR), /* IEEE 802.11a, channels 52..64 */ - REG_RULE(5260-20, 5320+20, 40, 6, 20, + REG_RULE(5260-10, 5320+10, 40, 6, 20, NL80211_RRF_NO_IR| NL80211_RRF_DFS), } @@ -205,7 +205,7 @@ the data in regdb.c as an alternative to using CRDA. The file net/wireless/db.txt should be kept up-to-date with the db.txt file available in the git repository here: - git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-regdb.git + git://git.kernel.org/pub/scm/linux/kernel/git/sforshee/wireless-regdb.git Again, most users in most situations should be using the CRDA package provided with their distribution, and in most other situations users diff --git a/Documentation/networking/vrf.txt b/Documentation/networking/vrf.txt index 755dab856392..3918dae964d4 100644 --- a/Documentation/networking/vrf.txt +++ b/Documentation/networking/vrf.txt @@ -98,10 +98,11 @@ VRF device: or to specify the output device using cmsg and IP_PKTINFO. -TCP services running in the default VRF context (ie., not bound to any VRF -device) can work across all VRF domains by enabling the tcp_l3mdev_accept -sysctl option: +TCP & UDP services running in the default VRF context (ie., not bound +to any VRF device) can work across all VRF domains by enabling the +tcp_l3mdev_accept and udp_l3mdev_accept sysctl options: sysctl -w net.ipv4.tcp_l3mdev_accept=1 + sysctl -w net.ipv4.udp_l3mdev_accept=1 netfilter rules on the VRF device can be used to limit access to services running in the default VRF context as well. |