diff options
Diffstat (limited to 'Documentation/sphinx')
| -rw-r--r-- | Documentation/sphinx/kerneldoc-preamble.sty | 226 | ||||
| -rw-r--r-- | Documentation/sphinx/kfigure.py | 134 |
2 files changed, 347 insertions, 13 deletions
diff --git a/Documentation/sphinx/kerneldoc-preamble.sty b/Documentation/sphinx/kerneldoc-preamble.sty new file mode 100644 index 000000000000..9d0204dc38be --- /dev/null +++ b/Documentation/sphinx/kerneldoc-preamble.sty @@ -0,0 +1,226 @@ +% -*- coding: utf-8 -*- +% SPDX-License-Identifier: GPL-2.0 +% +% LaTeX preamble for "make latexdocs" or "make pdfdocs" including: +% - TOC width settings +% - Setting of tabulary (\tymin) +% - Headheight setting for fancyhdr +% - Fontfamily settings for CJK (Chinese, Japanese, and Korean) translations +% +% Note on the suffix of .sty: +% This is not implemented as a LaTeX style file, but as a file containing +% plain LaTeX code to be included into preamble. +% ".sty" is chosen because ".tex" would cause the build scripts to confuse +% this file with a LaTeX main file. +% +% Copyright (C) 2022 Akira Yokosawa + +% Custom width parameters for TOC +% - Redefine low-level commands defined in report.cls. +% - Indent of 2 chars is preserved for ease of comparison. +% Summary of changes from default params: +% Width of page number (\@pnumwidth): 1.55em -> 2.7em +% Width of chapter number: 1.5em -> 1.8em +% Indent of section number: 1.5em -> 1.8em +% Width of section number: 2.6em -> 3.2em +% Indent of sebsection number: 4.1em -> 5em +% Width of subsection number: 3.5em -> 4.3em +% +% These params can have 4 digit page counts, 2 digit chapter counts, +% section counts of 4 digits + 1 period (e.g., 18.10), and subsection counts +% of 5 digits + 2 periods (e.g., 18.7.13). +\makeatletter +%% Redefine \@pnumwidth (page number width) +\renewcommand*\@pnumwidth{2.7em} +%% Redefine \l@chapter (chapter list entry) +\renewcommand*\l@chapter[2]{% + \ifnum \c@tocdepth >\m@ne + \addpenalty{-\@highpenalty}% + \vskip 1.0em \@plus\p@ + \setlength\@tempdima{1.8em}% + \begingroup + \parindent \z@ \rightskip \@pnumwidth + \parfillskip -\@pnumwidth + \leavevmode \bfseries + \advance\leftskip\@tempdima + \hskip -\leftskip + #1\nobreak\hfil + \nobreak\hb@xt@\@pnumwidth{\hss #2% + \kern-\p@\kern\p@}\par + \penalty\@highpenalty + \endgroup + \fi} +%% Redefine \l@section and \l@subsection +\renewcommand*\l@section{\@dottedtocline{1}{1.8em}{3.2em}} +\renewcommand*\l@subsection{\@dottedtocline{2}{5em}{4.3em}} +\makeatother +%% Sphinx < 1.8 doesn't have \sphinxtableofcontentshook +\providecommand{\sphinxtableofcontentshook}{} +%% Undefine it for compatibility with Sphinx 1.7.9 +\renewcommand{\sphinxtableofcontentshook}{} % Empty the hook + +% Prevent column squeezing of tabulary. \tymin is set by Sphinx as: +% \setlength{\tymin}{3\fontcharwd\font`0 } +% , which is too short. +\setlength{\tymin}{20em} + +% Adjust \headheight for fancyhdr +\addtolength{\headheight}{1.6pt} +\addtolength{\topmargin}{-1.6pt} + +% Translations have Asian (CJK) characters which are only displayed if +% xeCJK is used +\IfFontExistsTF{Noto Sans CJK SC}{ + % Load xeCJK when CJK font is available + \usepackage{xeCJK} + % Noto CJK fonts don't provide slant shape. [AutoFakeSlant] permits + % its emulation. + % Select KR variant at the beginning of each document so that quotation + % and apostorph symbols of half-width is used in TOC of Latin documents. + \IfFontExistsTF{Noto Serif CJK KR}{ + \setCJKmainfont{Noto Serif CJK KR}[AutoFakeSlant] + }{ + \setCJKmainfont{Noto Sans CJK KR}[AutoFakeSlant] + } + \setCJKsansfont{Noto Sans CJK KR}[AutoFakeSlant] + \setCJKmonofont{Noto Sans Mono CJK KR}[AutoFakeSlant] + % Teach xeCJK of half-width symbols + \xeCJKDeclareCharClass{HalfLeft}{`“,`‘} + \xeCJKDeclareCharClass{HalfRight}{`”,`’} + % CJK Language-specific font choices + %% for Simplified Chinese + \IfFontExistsTF{Noto Serif CJK SC}{ + \newCJKfontfamily[SCmain]\scmain{Noto Serif CJK SC}[AutoFakeSlant] + \newCJKfontfamily[SCserif]\scserif{Noto Serif CJK SC}[AutoFakeSlant] + }{ + \newCJKfontfamily[SCmain]\scmain{Noto Sans CJK SC}[AutoFakeSlant] + \newCJKfontfamily[SCserif]\scserif{Noto Sans CJK SC}[AutoFakeSlant] + } + \newCJKfontfamily[SCsans]\scsans{Noto Sans CJK SC}[AutoFakeSlant] + \newCJKfontfamily[SCmono]\scmono{Noto Sans Mono CJK SC}[AutoFakeSlant] + %% for Traditional Chinese + \IfFontExistsTF{Noto Serif CJK TC}{ + \newCJKfontfamily[TCmain]\tcmain{Noto Serif CJK TC}[AutoFakeSlant] + \newCJKfontfamily[TCserif]\tcserif{Noto Serif CJK TC}[AutoFakeSlant] + }{ + \newCJKfontfamily[TCmain]\tcmain{Noto Sans CJK TC}[AutoFakeSlant] + \newCJKfontfamily[TCserif]\tcserif{Noto Sans CJK TC}[AutoFakeSlant] + } + \newCJKfontfamily[TCsans]\tcsans{Noto Sans CJK TC}[AutoFakeSlant] + \newCJKfontfamily[TCmono]\tcmono{Noto Sans Mono CJK TC}[AutoFakeSlant] + %% for Korean + \IfFontExistsTF{Noto Serif CJK KR}{ + \newCJKfontfamily[KRmain]\krmain{Noto Serif CJK KR}[AutoFakeSlant] + \newCJKfontfamily[KRserif]\krserif{Noto Serif CJK KR}[AutoFakeSlant] + }{ + \newCJKfontfamily[KRmain]\krmain{Noto Sans CJK KR}[AutoFakeSlant] + \newCJKfontfamily[KRserif]\krserif{Noto Sans CJK KR}[AutoFakeSlant] + } + \newCJKfontfamily[KRsans]\krsans{Noto Sans CJK KR}[AutoFakeSlant] + \newCJKfontfamily[KRmono]\krmono{Noto Sans Mono CJK KR}[AutoFakeSlant] + %% for Japanese + \IfFontExistsTF{Noto Serif CJK JP}{ + \newCJKfontfamily[JPmain]\jpmain{Noto Serif CJK JP}[AutoFakeSlant] + \newCJKfontfamily[JPserif]\jpserif{Noto Serif CJK JP}[AutoFakeSlant] + }{ + \newCJKfontfamily[JPmain]\jpmain{Noto Sans CJK JP}[AutoFakeSlant] + \newCJKfontfamily[JPserif]\jpserif{Noto Sans CJK JP}[AutoFakeSlant] + } + \newCJKfontfamily[JPsans]\jpsans{Noto Sans CJK JP}[AutoFakeSlant] + \newCJKfontfamily[JPmono]\jpmono{Noto Sans Mono CJK JP}[AutoFakeSlant] + % Dummy commands for Sphinx < 2.3 (no 'extrapackages' support) + \providecommand{\onehalfspacing}{} + \providecommand{\singlespacing}{} + % Define custom macros to on/off CJK + %% One and half spacing for CJK contents + \newcommand{\kerneldocCJKon}{\makexeCJKactive\onehalfspacing} + \newcommand{\kerneldocCJKoff}{\makexeCJKinactive\singlespacing} + % Define custom macros for switching CJK font setting + %% for Simplified Chinese + \newcommand{\kerneldocBeginSC}{% + \begingroup% + \scmain% + \xeCJKDeclareCharClass{FullLeft}{`“,`‘}% Full-width in SC + \xeCJKDeclareCharClass{FullRight}{`”,`’}% Full-width in SC + \renewcommand{\CJKrmdefault}{SCserif}% + \renewcommand{\CJKsfdefault}{SCsans}% + \renewcommand{\CJKttdefault}{SCmono}% + \xeCJKsetup{CJKspace = false}% gobble white spaces by ' ' + % For CJK ascii-art alignment + \setmonofont{Noto Sans Mono CJK SC}[AutoFakeSlant]% + } + \newcommand{\kerneldocEndSC}{\endgroup} + %% for Traditional Chinese + \newcommand{\kerneldocBeginTC}{% + \begingroup% + \tcmain% + \xeCJKDeclareCharClass{FullLeft}{`“,`‘}% Full-width in TC + \xeCJKDeclareCharClass{FullRight}{`”,`’}% Full-width in TC + \renewcommand{\CJKrmdefault}{TCserif}% + \renewcommand{\CJKsfdefault}{TCsans}% + \renewcommand{\CJKttdefault}{TCmono}% + \xeCJKsetup{CJKspace = false}% gobble white spaces by ' ' + % For CJK ascii-art alignment + \setmonofont{Noto Sans Mono CJK TC}[AutoFakeSlant]% + } + \newcommand{\kerneldocEndTC}{\endgroup} + %% for Korean + \newcommand{\kerneldocBeginKR}{% + \begingroup% + \krmain% + \renewcommand{\CJKrmdefault}{KRserif}% + \renewcommand{\CJKsfdefault}{KRsans}% + \renewcommand{\CJKttdefault}{KRmono}% + % \xeCJKsetup{CJKspace = true} % true by default + % For CJK ascii-art alignment (still misaligned for Hangul) + \setmonofont{Noto Sans Mono CJK KR}[AutoFakeSlant]% + } + \newcommand{\kerneldocEndKR}{\endgroup} + %% for Japanese + \newcommand{\kerneldocBeginJP}{% + \begingroup% + \jpmain% + \renewcommand{\CJKrmdefault}{JPserif}% + \renewcommand{\CJKsfdefault}{JPsans}% + \renewcommand{\CJKttdefault}{JPmono}% + \xeCJKsetup{CJKspace = false}% gobble white space by ' ' + % For CJK ascii-art alignment + \setmonofont{Noto Sans Mono CJK JP}[AutoFakeSlant]% + } + \newcommand{\kerneldocEndJP}{\endgroup} + + % Single spacing in literal blocks + \fvset{baselinestretch=1} + % To customize \sphinxtableofcontents + \usepackage{etoolbox} + % Inactivate CJK after tableofcontents + \apptocmd{\sphinxtableofcontents}{\kerneldocCJKoff}{}{} + \xeCJKsetup{CJKspace = true}% For inter-phrase space of Korean TOC +}{ % No CJK font found + % Custom macros to on/off CJK and switch CJK fonts (Dummy) + \newcommand{\kerneldocCJKon}{} + \newcommand{\kerneldocCJKoff}{} + %% By defining \kerneldocBegin(SC|TC|KR|JP) as commands with an argument + %% and ignore the argument (#1) in their definitions, whole contents of + %% CJK chapters can be ignored. + \newcommand{\kerneldocBeginSC}[1]{% + %% Put a note on missing CJK fonts in place of zh_CN translation. + \begin{sphinxadmonition}{note}{Note on missing fonts:} + Translations of Simplified Chinese (zh\_CN), Traditional Chinese + (zh\_TW), Korean (ko\_KR), and Japanese (ja\_JP) were skipped + due to the lack of suitable font families. + + If you want them, please install ``Noto Sans CJK'' font families + by following instructions from + \sphinxcode{./scripts/sphinx-pre-install}. + Having optional ``Noto Serif CJK'' font families will improve + the looks of those translations. + \end{sphinxadmonition}} + \newcommand{\kerneldocEndSC}{} + \newcommand{\kerneldocBeginTC}[1]{} + \newcommand{\kerneldocEndTC}{} + \newcommand{\kerneldocBeginKR}[1]{} + \newcommand{\kerneldocEndKR}{} + \newcommand{\kerneldocBeginJP}[1]{} + \newcommand{\kerneldocEndJP}{} +} diff --git a/Documentation/sphinx/kfigure.py b/Documentation/sphinx/kfigure.py index 3c78828330be..24d2b2addcce 100644 --- a/Documentation/sphinx/kfigure.py +++ b/Documentation/sphinx/kfigure.py @@ -31,10 +31,13 @@ u""" * ``dot(1)``: Graphviz (https://www.graphviz.org). If Graphviz is not available, the DOT language is inserted as literal-block. + For conversion to PDF, ``rsvg-convert(1)`` of librsvg + (https://gitlab.gnome.org/GNOME/librsvg) is used when available. * SVG to PDF: To generate PDF, you need at least one of this tools: - ``convert(1)``: ImageMagick (https://www.imagemagick.org) + - ``inkscape(1)``: Inkscape (https://inkscape.org/) List of customizations: @@ -49,6 +52,7 @@ import os from os import path import subprocess from hashlib import sha1 +import re from docutils import nodes from docutils.statemachine import ViewList from docutils.parsers.rst import directives @@ -109,10 +113,20 @@ def pass_handle(self, node): # pylint: disable=W0613 # Graphviz's dot(1) support dot_cmd = None +# dot(1) -Tpdf should be used +dot_Tpdf = False # ImageMagick' convert(1) support convert_cmd = None +# librsvg's rsvg-convert(1) support +rsvg_convert_cmd = None + +# Inkscape's inkscape(1) support +inkscape_cmd = None +# Inkscape prior to 1.0 uses different command options +inkscape_ver_one = False + def setup(app): # check toolchain first @@ -160,23 +174,62 @@ def setupTools(app): This function is called once, when the builder is initiated. """ - global dot_cmd, convert_cmd # pylint: disable=W0603 + global dot_cmd, dot_Tpdf, convert_cmd, rsvg_convert_cmd # pylint: disable=W0603 + global inkscape_cmd, inkscape_ver_one # pylint: disable=W0603 kernellog.verbose(app, "kfigure: check installed tools ...") dot_cmd = which('dot') convert_cmd = which('convert') + rsvg_convert_cmd = which('rsvg-convert') + inkscape_cmd = which('inkscape') if dot_cmd: kernellog.verbose(app, "use dot(1) from: " + dot_cmd) + + try: + dot_Thelp_list = subprocess.check_output([dot_cmd, '-Thelp'], + stderr=subprocess.STDOUT) + except subprocess.CalledProcessError as err: + dot_Thelp_list = err.output + pass + + dot_Tpdf_ptn = b'pdf' + dot_Tpdf = re.search(dot_Tpdf_ptn, dot_Thelp_list) else: kernellog.warn(app, "dot(1) not found, for better output quality install " "graphviz from https://www.graphviz.org") - if convert_cmd: - kernellog.verbose(app, "use convert(1) from: " + convert_cmd) + if inkscape_cmd: + kernellog.verbose(app, "use inkscape(1) from: " + inkscape_cmd) + inkscape_ver = subprocess.check_output([inkscape_cmd, '--version'], + stderr=subprocess.DEVNULL) + ver_one_ptn = b'Inkscape 1' + inkscape_ver_one = re.search(ver_one_ptn, inkscape_ver) + convert_cmd = None + rsvg_convert_cmd = None + dot_Tpdf = False + else: - kernellog.warn(app, - "convert(1) not found, for SVG to PDF conversion install " - "ImageMagick (https://www.imagemagick.org)") + if convert_cmd: + kernellog.verbose(app, "use convert(1) from: " + convert_cmd) + else: + kernellog.warn(app, + "Neither inkscape(1) nor convert(1) found.\n" + "For SVG to PDF conversion, " + "install either Inkscape (https://inkscape.org/) (preferred) or\n" + "ImageMagick (https://www.imagemagick.org)") + + if rsvg_convert_cmd: + kernellog.verbose(app, "use rsvg-convert(1) from: " + rsvg_convert_cmd) + kernellog.verbose(app, "use 'dot -Tsvg' and rsvg-convert(1) for DOT -> PDF conversion") + dot_Tpdf = False + else: + kernellog.verbose(app, + "rsvg-convert(1) not found.\n" + " SVG rendering of convert(1) is done by ImageMagick-native renderer.") + if dot_Tpdf: + kernellog.verbose(app, "use 'dot -Tpdf' for DOT -> PDF conversion") + else: + kernellog.verbose(app, "use 'dot -Tsvg' and convert(1) for DOT -> PDF conversion") # integrate conversion tools @@ -242,7 +295,7 @@ def convert_image(img_node, translator, src_fname=None): elif in_ext == '.svg': if translator.builder.format == 'latex': - if convert_cmd is None: + if not inkscape_cmd and convert_cmd is None: kernellog.verbose(app, "no SVG to PDF conversion available / include SVG raw.") img_node.replace_self(file2literal(src_fname)) @@ -266,7 +319,14 @@ def convert_image(img_node, translator, src_fname=None): if in_ext == '.dot': kernellog.verbose(app, 'convert DOT to: {out}/' + _name) - ok = dot2format(app, src_fname, dst_fname) + if translator.builder.format == 'latex' and not dot_Tpdf: + svg_fname = path.join(translator.builder.outdir, fname + '.svg') + ok1 = dot2format(app, src_fname, svg_fname) + ok2 = svg2pdf_by_rsvg(app, svg_fname, dst_fname) + ok = ok1 and ok2 + + else: + ok = dot2format(app, src_fname, dst_fname) elif in_ext == '.svg': kernellog.verbose(app, 'convert SVG to: {out}/' + _name) @@ -303,22 +363,70 @@ def dot2format(app, dot_fname, out_fname): return bool(exit_code == 0) def svg2pdf(app, svg_fname, pdf_fname): - """Converts SVG to PDF with ``convert(1)`` command. + """Converts SVG to PDF with ``inkscape(1)`` or ``convert(1)`` command. - Uses ``convert(1)`` from ImageMagick (https://www.imagemagick.org) for - conversion. Returns ``True`` on success and ``False`` if an error occurred. + Uses ``inkscape(1)`` from Inkscape (https://inkscape.org/) or ``convert(1)`` + from ImageMagick (https://www.imagemagick.org) for conversion. + Returns ``True`` on success and ``False`` if an error occurred. * ``svg_fname`` pathname of the input SVG file with extension (``.svg``) * ``pdf_name`` pathname of the output PDF file with extension (``.pdf``) """ cmd = [convert_cmd, svg_fname, pdf_fname] - # use stdout and stderr from parent - exit_code = subprocess.call(cmd) + cmd_name = 'convert(1)' + + if inkscape_cmd: + cmd_name = 'inkscape(1)' + if inkscape_ver_one: + cmd = [inkscape_cmd, '-o', pdf_fname, svg_fname] + else: + cmd = [inkscape_cmd, '-z', '--export-pdf=%s' % pdf_fname, svg_fname] + + try: + warning_msg = subprocess.check_output(cmd, stderr=subprocess.STDOUT) + exit_code = 0 + except subprocess.CalledProcessError as err: + warning_msg = err.output + exit_code = err.returncode + pass + if exit_code != 0: kernellog.warn(app, "Error #%d when calling: %s" % (exit_code, " ".join(cmd))) + if warning_msg: + kernellog.warn(app, "Warning msg from %s: %s" + % (cmd_name, str(warning_msg, 'utf-8'))) + elif warning_msg: + kernellog.verbose(app, "Warning msg from %s (likely harmless):\n%s" + % (cmd_name, str(warning_msg, 'utf-8'))) + return bool(exit_code == 0) +def svg2pdf_by_rsvg(app, svg_fname, pdf_fname): + """Convert SVG to PDF with ``rsvg-convert(1)`` command. + + * ``svg_fname`` pathname of input SVG file, including extension ``.svg`` + * ``pdf_fname`` pathname of output PDF file, including extension ``.pdf`` + + Input SVG file should be the one generated by ``dot2format()``. + SVG -> PDF conversion is done by ``rsvg-convert(1)``. + + If ``rsvg-convert(1)`` is unavailable, fall back to ``svg2pdf()``. + + """ + + if rsvg_convert_cmd is None: + ok = svg2pdf(app, svg_fname, pdf_fname) + else: + cmd = [rsvg_convert_cmd, '--format=pdf', '-o', pdf_fname, svg_fname] + # use stdout and stderr from parent + exit_code = subprocess.call(cmd) + if exit_code != 0: + kernellog.warn(app, "Error #%d when calling: %s" % (exit_code, " ".join(cmd))) + ok = bool(exit_code == 0) + + return ok + # image handling # --------------------- |