diff options
Diffstat (limited to 'Documentation/userspace-api')
-rw-r--r-- | Documentation/userspace-api/index.rst | 47 | ||||
-rw-r--r-- | Documentation/userspace-api/ioctl/ioctl-number.rst | 3 | ||||
-rw-r--r-- | Documentation/userspace-api/perf_ring_buffer.rst | 830 |
3 files changed, 869 insertions, 11 deletions
diff --git a/Documentation/userspace-api/index.rst b/Documentation/userspace-api/index.rst index 09f61bd2ac2e..67d663cf2ff2 100644 --- a/Documentation/userspace-api/index.rst +++ b/Documentation/userspace-api/index.rst @@ -9,31 +9,58 @@ While much of the kernel's user-space API is documented elsewhere also be found in the kernel tree itself. This manual is intended to be the place where this information is gathered. + +System calls +============ + +.. toctree:: + :maxdepth: 1 + + unshare + futex2 + ebpf/index + ioctl/index + +Security-related interfaces +=========================== + .. toctree:: - :caption: Table of contents - :maxdepth: 2 + :maxdepth: 1 no_new_privs seccomp_filter landlock - unshare + lsm spec_ctrl + tee + +Devices and I/O +=============== + +.. toctree:: + :maxdepth: 1 + accelerators/ocxl dma-buf-alloc-exchange - ebpf/index - ELF - ioctl/index iommu iommufd media/index + dcdbas + vduse + isapnp + +Everything else +=============== + +.. toctree:: + :maxdepth: 1 + + ELF netlink/index sysfs-platform_profile vduse futex2 - lsm - tee - isapnp - dcdbas + perf_ring_buffer .. only:: subproject and html diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst index b33918232f78..c472423412bf 100644 --- a/Documentation/userspace-api/ioctl/ioctl-number.rst +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst @@ -82,8 +82,9 @@ Code Seq# Include File Comments 0x10 00-0F drivers/char/s390/vmcp.h 0x10 10-1F arch/s390/include/uapi/sclp_ctl.h 0x10 20-2F arch/s390/include/uapi/asm/hypfs.h -0x12 all linux/fs.h +0x12 all linux/fs.h BLK* ioctls linux/blkpg.h +0x15 all linux/fs.h FS_IOC_* ioctls 0x1b all InfiniBand Subsystem <http://infiniband.sourceforge.net/> 0x20 all drivers/cdrom/cm206.h diff --git a/Documentation/userspace-api/perf_ring_buffer.rst b/Documentation/userspace-api/perf_ring_buffer.rst new file mode 100644 index 000000000000..bde9d8cbc106 --- /dev/null +++ b/Documentation/userspace-api/perf_ring_buffer.rst @@ -0,0 +1,830 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================ +Perf ring buffer +================ + +.. CONTENTS + + 1. Introduction + + 2. Ring buffer implementation + 2.1 Basic algorithm + 2.2 Ring buffer for different tracing modes + 2.2.1 Default mode + 2.2.2 Per-thread mode + 2.2.3 Per-CPU mode + 2.2.4 System wide mode + 2.3 Accessing buffer + 2.3.1 Producer-consumer model + 2.3.2 Properties of the ring buffers + 2.3.3 Writing samples into buffer + 2.3.4 Reading samples from buffer + 2.3.5 Memory synchronization + + 3. The mechanism of AUX ring buffer + 3.1 The relationship between AUX and regular ring buffers + 3.2 AUX events + 3.3 Snapshot mode + + +1. Introduction +=============== + +The ring buffer is a fundamental mechanism for data transfer. perf uses +ring buffers to transfer event data from kernel to user space, another +kind of ring buffer which is so called auxiliary (AUX) ring buffer also +plays an important role for hardware tracing with Intel PT, Arm +CoreSight, etc. + +The ring buffer implementation is critical but it's also a very +challenging work. On the one hand, the kernel and perf tool in the user +space use the ring buffer to exchange data and stores data into data +file, thus the ring buffer needs to transfer data with high throughput; +on the other hand, the ring buffer management should avoid significant +overload to distract profiling results. + +This documentation dives into the details for perf ring buffer with two +parts: firstly it explains the perf ring buffer implementation, then the +second part discusses the AUX ring buffer mechanism. + +2. Ring buffer implementation +============================= + +2.1 Basic algorithm +------------------- + +That said, a typical ring buffer is managed by a head pointer and a tail +pointer; the head pointer is manipulated by a writer and the tail +pointer is updated by a reader respectively. + +:: + + +---------------------------+ + | | |***|***|***| | | + +---------------------------+ + `-> Tail `-> Head + + * : the data is filled by the writer. + + Figure 1. Ring buffer + +Perf uses the same way to manage its ring buffer. In the implementation +there are two key data structures held together in a set of consecutive +pages, the control structure and then the ring buffer itself. The page +with the control structure in is known as the "user page". Being held +in continuous virtual addresses simplifies locating the ring buffer +address, it is in the pages after the page with the user page. + +The control structure is named as ``perf_event_mmap_page``, it contains a +head pointer ``data_head`` and a tail pointer ``data_tail``. When the +kernel starts to fill records into the ring buffer, it updates the head +pointer to reserve the memory so later it can safely store events into +the buffer. On the other side, when the user page is a writable mapping, +the perf tool has the permission to update the tail pointer after consuming +data from the ring buffer. Yet another case is for the user page's +read-only mapping, which is to be addressed in the section +:ref:`writing_samples_into_buffer`. + +:: + + user page ring buffer + +---------+---------+ +---------------------------------------+ + |data_head|data_tail|...| | |***|***|***|***|***| | | | + +---------+---------+ +---------------------------------------+ + ` `----------------^ ^ + `----------------------------------------------| + + * : the data is filled by the writer. + + Figure 2. Perf ring buffer + +When using the ``perf record`` tool, we can specify the ring buffer size +with option ``-m`` or ``--mmap-pages=``, the given size will be rounded up +to a power of two that is a multiple of a page size. Though the kernel +allocates at once for all memory pages, it's deferred to map the pages +to VMA area until the perf tool accesses the buffer from the user space. +In other words, at the first time accesses the buffer's page from user +space in the perf tool, a data abort exception for page fault is taken +and the kernel uses this occasion to map the page into process VMA +(see ``perf_mmap_fault()``), thus the perf tool can continue to access +the page after returning from the exception. + +2.2 Ring buffer for different tracing modes +------------------------------------------- + +The perf profiles programs with different modes: default mode, per thread +mode, per cpu mode, and system wide mode. This section describes these +modes and how the ring buffer meets requirements for them. At last we +will review the race conditions caused by these modes. + +2.2.1 Default mode +^^^^^^^^^^^^^^^^^^ + +Usually we execute ``perf record`` command followed by a profiling program +name, like below command:: + + perf record test_program + +This command doesn't specify any options for CPU and thread modes, the +perf tool applies the default mode on the perf event. It maps all the +CPUs in the system and the profiled program's PID on the perf event, and +it enables inheritance mode on the event so that child tasks inherits +the events. As a result, the perf event is attributed as:: + + evsel::cpus::map[] = { 0 .. _SC_NPROCESSORS_ONLN-1 } + evsel::threads::map[] = { pid } + evsel::attr::inherit = 1 + +These attributions finally will be reflected on the deployment of ring +buffers. As shown below, the perf tool allocates individual ring buffer +for each CPU, but it only enables events for the profiled program rather +than for all threads in the system. The *T1* thread represents the +thread context of the 'test_program', whereas *T2* and *T3* are irrelevant +threads in the system. The perf samples are exclusively collected for +the *T1* thread and stored in the ring buffer associated with the CPU on +which the *T1* thread is running. + +:: + + T1 T2 T1 + +----+ +-----------+ +----+ + CPU0 |xxxx| |xxxxxxxxxxx| |xxxx| + +----+--------------+-----------+----------+----+--------> + | | + v v + +-----------------------------------------------------+ + | Ring buffer 0 | + +-----------------------------------------------------+ + + T1 + +-----+ + CPU1 |xxxxx| + -----+-----+---------------------------------------------> + | + v + +-----------------------------------------------------+ + | Ring buffer 1 | + +-----------------------------------------------------+ + + T1 T3 + +----+ +-------+ + CPU2 |xxxx| |xxxxxxx| + --------------------------+----+--------+-------+--------> + | + v + +-----------------------------------------------------+ + | Ring buffer 2 | + +-----------------------------------------------------+ + + T1 + +--------------+ + CPU3 |xxxxxxxxxxxxxx| + -----------+--------------+------------------------------> + | + v + +-----------------------------------------------------+ + | Ring buffer 3 | + +-----------------------------------------------------+ + + T1: Thread 1; T2: Thread 2; T3: Thread 3 + x: Thread is in running state + + Figure 3. Ring buffer for default mode + +2.2.2 Per-thread mode +^^^^^^^^^^^^^^^^^^^^^ + +By specifying option ``--per-thread`` in perf command, e.g. + +:: + + perf record --per-thread test_program + +The perf event doesn't map to any CPUs and is only bound to the +profiled process, thus, the perf event's attributions are:: + + evsel::cpus::map[0] = { -1 } + evsel::threads::map[] = { pid } + evsel::attr::inherit = 0 + +In this mode, a single ring buffer is allocated for the profiled thread; +if the thread is scheduled on a CPU, the events on that CPU will be +enabled; and if the thread is scheduled out from the CPU, the events on +the CPU will be disabled. When the thread is migrated from one CPU to +another, the events are to be disabled on the previous CPU and enabled +on the next CPU correspondingly. + +:: + + T1 T2 T1 + +----+ +-----------+ +----+ + CPU0 |xxxx| |xxxxxxxxxxx| |xxxx| + +----+--------------+-----------+----------+----+--------> + | | + | T1 | + | +-----+ | + CPU1 | |xxxxx| | + --|--+-----+----------------------------------|----------> + | | | + | | T1 T3 | + | | +----+ +---+ | + CPU2 | | |xxxx| |xxx| | + --|-----|-----------------+----+--------+---+-|----------> + | | | | + | | T1 | | + | | +--------------+ | | + CPU3 | | |xxxxxxxxxxxxxx| | | + --|-----|--+--------------+-|-----------------|----------> + | | | | | + v v v v v + +-----------------------------------------------------+ + | Ring buffer | + +-----------------------------------------------------+ + + T1: Thread 1 + x: Thread is in running state + + Figure 4. Ring buffer for per-thread mode + +When perf runs in per-thread mode, a ring buffer is allocated for the +profiled thread *T1*. The ring buffer is dedicated for thread *T1*, if the +thread *T1* is running, the perf events will be recorded into the ring +buffer; when the thread is sleeping, all associated events will be +disabled, thus no trace data will be recorded into the ring buffer. + +2.2.3 Per-CPU mode +^^^^^^^^^^^^^^^^^^ + +The option ``-C`` is used to collect samples on the list of CPUs, for +example the below perf command receives option ``-C 0,2``:: + + perf record -C 0,2 test_program + +It maps the perf event to CPUs 0 and 2, and the event is not associated to any +PID. Thus the perf event attributions are set as:: + + evsel::cpus::map[0] = { 0, 2 } + evsel::threads::map[] = { -1 } + evsel::attr::inherit = 0 + +This results in the session of ``perf record`` will sample all threads on CPU0 +and CPU2, and be terminated until test_program exits. Even there have tasks +running on CPU1 and CPU3, since the ring buffer is absent for them, any +activities on these two CPUs will be ignored. A usage case is to combine the +options for per-thread mode and per-CPU mode, e.g. the options ``–C 0,2`` and +``––per–thread`` are specified together, the samples are recorded only when +the profiled thread is scheduled on any of the listed CPUs. + +:: + + T1 T2 T1 + +----+ +-----------+ +----+ + CPU0 |xxxx| |xxxxxxxxxxx| |xxxx| + +----+--------------+-----------+----------+----+--------> + | | | + v v v + +-----------------------------------------------------+ + | Ring buffer 0 | + +-----------------------------------------------------+ + + T1 + +-----+ + CPU1 |xxxxx| + -----+-----+---------------------------------------------> + + T1 T3 + +----+ +-------+ + CPU2 |xxxx| |xxxxxxx| + --------------------------+----+--------+-------+--------> + | | + v v + +-----------------------------------------------------+ + | Ring buffer 1 | + +-----------------------------------------------------+ + + T1 + +--------------+ + CPU3 |xxxxxxxxxxxxxx| + -----------+--------------+------------------------------> + + T1: Thread 1; T2: Thread 2; T3: Thread 3 + x: Thread is in running state + + Figure 5. Ring buffer for per-CPU mode + +2.2.4 System wide mode +^^^^^^^^^^^^^^^^^^^^^^ + +By using option ``–a`` or ``––all–cpus``, perf collects samples on all CPUs +for all tasks, we call it as the system wide mode, the command is:: + + perf record -a test_program + +Similar to the per-CPU mode, the perf event doesn't bind to any PID, and +it maps to all CPUs in the system:: + + evsel::cpus::map[] = { 0 .. _SC_NPROCESSORS_ONLN-1 } + evsel::threads::map[] = { -1 } + evsel::attr::inherit = 0 + +In the system wide mode, every CPU has its own ring buffer, all threads +are monitored during the running state and the samples are recorded into +the ring buffer belonging to the CPU which the events occurred on. + +:: + + T1 T2 T1 + +----+ +-----------+ +----+ + CPU0 |xxxx| |xxxxxxxxxxx| |xxxx| + +----+--------------+-----------+----------+----+--------> + | | | + v v v + +-----------------------------------------------------+ + | Ring buffer 0 | + +-----------------------------------------------------+ + + T1 + +-----+ + CPU1 |xxxxx| + -----+-----+---------------------------------------------> + | + v + +-----------------------------------------------------+ + | Ring buffer 1 | + +-----------------------------------------------------+ + + T1 T3 + +----+ +-------+ + CPU2 |xxxx| |xxxxxxx| + --------------------------+----+--------+-------+--------> + | | + v v + +-----------------------------------------------------+ + | Ring buffer 2 | + +-----------------------------------------------------+ + + T1 + +--------------+ + CPU3 |xxxxxxxxxxxxxx| + -----------+--------------+------------------------------> + | + v + +-----------------------------------------------------+ + | Ring buffer 3 | + +-----------------------------------------------------+ + + T1: Thread 1; T2: Thread 2; T3: Thread 3 + x: Thread is in running state + + Figure 6. Ring buffer for system wide mode + +2.3 Accessing buffer +-------------------- + +Based on the understanding of how the ring buffer is allocated in +various modes, this section explains access the ring buffer. + +2.3.1 Producer-consumer model +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +In the Linux kernel, the PMU events can produce samples which are stored +into the ring buffer; the perf command in user space consumes the +samples by reading out data from the ring buffer and finally saves the +data into the file for post analysis. It’s a typical producer-consumer +model for using the ring buffer. + +The perf process polls on the PMU events and sleeps when no events are +incoming. To prevent frequent exchanges between the kernel and user +space, the kernel event core layer introduces a watermark, which is +stored in the ``perf_buffer::watermark``. When a sample is recorded into +the ring buffer, and if the used buffer exceeds the watermark, the +kernel wakes up the perf process to read samples from the ring buffer. + +:: + + Perf + / | Read samples + Polling / `--------------| Ring buffer + v v ;---------------------v + +----------------+ +---------+---------+ +-------------------+ + |Event wait queue| |data_head|data_tail| |***|***| | |***| + +----------------+ +---------+---------+ +-------------------+ + ^ ^ `------------------------^ + | Wake up tasks | Store samples + +-----------------------------+ + | Kernel event core layer | + +-----------------------------+ + + * : the data is filled by the writer. + + Figure 7. Writing and reading the ring buffer + +When the kernel event core layer notifies the user space, because +multiple events might share the same ring buffer for recording samples, +the core layer iterates every event associated with the ring buffer and +wakes up tasks waiting on the event. This is fulfilled by the kernel +function ``ring_buffer_wakeup()``. + +After the perf process is woken up, it starts to check the ring buffers +one by one, if it finds any ring buffer containing samples it will read +out the samples for statistics or saving into the data file. Given the +perf process is able to run on any CPU, this leads to the ring buffer +potentially being accessed from multiple CPUs simultaneously, which +causes race conditions. The race condition handling is described in the +section :ref:`memory_synchronization`. + +2.3.2 Properties of the ring buffers +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Linux kernel supports two write directions for the ring buffer: forward and +backward. The forward writing saves samples from the beginning of the ring +buffer, the backward writing stores data from the end of the ring buffer with +the reversed direction. The perf tool determines the writing direction. + +Additionally, the tool can map buffers in either read-write mode or read-only +mode to the user space. + +The ring buffer in the read-write mode is mapped with the property +``PROT_READ | PROT_WRITE``. With the write permission, the perf tool +updates the ``data_tail`` to indicate the data start position. Combining +with the head pointer ``data_head``, which works as the end position of +the current data, the perf tool can easily know where read out the data +from. + +Alternatively, in the read-only mode, only the kernel keeps to update +the ``data_head`` while the user space cannot access the ``data_tail`` due +to the mapping property ``PROT_READ``. + +As a result, the matrix below illustrates the various combinations of +direction and mapping characteristics. The perf tool employs two of these +combinations to support buffer types: the non-overwrite buffer and the +overwritable buffer. + +.. list-table:: + :widths: 1 1 1 + :header-rows: 1 + + * - Mapping mode + - Forward + - Backward + * - read-write + - Non-overwrite ring buffer + - Not used + * - read-only + - Not used + - Overwritable ring buffer + +The non-overwrite ring buffer uses the read-write mapping with forward +writing. It starts to save data from the beginning of the ring buffer +and wrap around when overflow, which is used with the read-write mode in +the normal ring buffer. When the consumer doesn't keep up with the +producer, it would lose some data, the kernel keeps how many records it +lost and generates the ``PERF_RECORD_LOST`` records in the next time +when it finds a space in the ring buffer. + +The overwritable ring buffer uses the backward writing with the +read-only mode. It saves the data from the end of the ring buffer and +the ``data_head`` keeps the position of current data, the perf always +knows where it starts to read and until the end of the ring buffer, thus +it don't need the ``data_tail``. In this mode, it will not generate the +``PERF_RECORD_LOST`` records. + +.. _writing_samples_into_buffer: + +2.3.3 Writing samples into buffer +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +When a sample is taken and saved into the ring buffer, the kernel +prepares sample fields based on the sample type; then it prepares the +info for writing ring buffer which is stored in the structure +``perf_output_handle``. In the end, the kernel outputs the sample into +the ring buffer and updates the head pointer in the user page so the +perf tool can see the latest value. + +The structure ``perf_output_handle`` serves as a temporary context for +tracking the information related to the buffer. The advantages of it is +that it enables concurrent writing to the buffer by different events. +For example, a software event and a hardware PMU event both are enabled +for profiling, two instances of ``perf_output_handle`` serve as separate +contexts for the software event and the hardware event respectively. +This allows each event to reserve its own memory space for populating +the record data. + +2.3.4 Reading samples from buffer +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +In the user space, the perf tool utilizes the ``perf_event_mmap_page`` +structure to handle the head and tail of the buffer. It also uses +``perf_mmap`` structure to keep track of a context for the ring buffer, this +context includes information about the buffer's starting and ending +addresses. Additionally, the mask value can be utilized to compute the +circular buffer pointer even for an overflow. + +Similar to the kernel, the perf tool in the user space first reads out +the recorded data from the ring buffer, and then updates the buffer's +tail pointer ``perf_event_mmap_page::data_tail``. + +.. _memory_synchronization: + +2.3.5 Memory synchronization +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The modern CPUs with relaxed memory model cannot promise the memory +ordering, this means it’s possible to access the ring buffer and the +``perf_event_mmap_page`` structure out of order. To assure the specific +sequence for memory accessing perf ring buffer, memory barriers are +used to assure the data dependency. The rationale for the memory +synchronization is as below:: + + Kernel User space + + if (LOAD ->data_tail) { LOAD ->data_head + (A) smp_rmb() (C) + STORE $data LOAD $data + smp_wmb() (B) smp_mb() (D) + STORE ->data_head STORE ->data_tail + } + +The comments in tools/include/linux/ring_buffer.h gives nice description +for why and how to use memory barriers, here we will just provide an +alternative explanation: + +(A) is a control dependency so that CPU assures order between checking +pointer ``perf_event_mmap_page::data_tail`` and filling sample into ring +buffer; + +(D) pairs with (A). (D) separates the ring buffer data reading from +writing the pointer ``data_tail``, perf tool first consumes samples and then +tells the kernel that the data chunk has been released. Since a reading +operation is followed by a writing operation, thus (D) is a full memory +barrier. + +(B) is a writing barrier in the middle of two writing operations, which +makes sure that recording a sample must be prior to updating the head +pointer. + +(C) pairs with (B). (C) is a read memory barrier to ensure the head +pointer is fetched before reading samples. + +To implement the above algorithm, the ``perf_output_put_handle()`` function +in the kernel and two helpers ``ring_buffer_read_head()`` and +``ring_buffer_write_tail()`` in the user space are introduced, they rely +on memory barriers as described above to ensure the data dependency. + +Some architectures support one-way permeable barrier with load-acquire +and store-release operations, these barriers are more relaxed with less +performance penalty, so (C) and (D) can be optimized to use barriers +``smp_load_acquire()`` and ``smp_store_release()`` respectively. + +If an architecture doesn’t support load-acquire and store-release in its +memory model, it will roll back to the old fashion of memory barrier +operations. In this case, ``smp_load_acquire()`` encapsulates +``READ_ONCE()`` + ``smp_mb()``, since ``smp_mb()`` is costly, +``ring_buffer_read_head()`` doesn't invoke ``smp_load_acquire()`` and it uses +the barriers ``READ_ONCE()`` + ``smp_rmb()`` instead. + +3. The mechanism of AUX ring buffer +=================================== + +In this chapter, we will explain the implementation of the AUX ring +buffer. In the first part it will discuss the connection between the +AUX ring buffer and the regular ring buffer, then the second part will +examine how the AUX ring buffer co-works with the regular ring buffer, +as well as the additional features introduced by the AUX ring buffer for +the sampling mechanism. + +3.1 The relationship between AUX and regular ring buffers +--------------------------------------------------------- + +Generally, the AUX ring buffer is an auxiliary for the regular ring +buffer. The regular ring buffer is primarily used to store the event +samples and every event format complies with the definition in the +union ``perf_event``; the AUX ring buffer is for recording the hardware +trace data and the trace data format is hardware IP dependent. + +The general use and advantage of the AUX ring buffer is that it is +written directly by hardware rather than by the kernel. For example, +regular profile samples that write to the regular ring buffer cause an +interrupt. Tracing execution requires a high number of samples and +using interrupts would be overwhelming for the regular ring buffer +mechanism. Having an AUX buffer allows for a region of memory more +decoupled from the kernel and written to directly by hardware tracing. + +The AUX ring buffer reuses the same algorithm with the regular ring +buffer for the buffer management. The control structure +``perf_event_mmap_page`` extends the new fields ``aux_head`` and ``aux_tail`` +for the head and tail pointers of the AUX ring buffer. + +During the initialisation phase, besides the mmap()-ed regular ring +buffer, the perf tool invokes a second syscall in the +``auxtrace_mmap__mmap()`` function for the mmap of the AUX buffer with +non-zero file offset; ``rb_alloc_aux()`` in the kernel allocates pages +correspondingly, these pages will be deferred to map into VMA when +handling the page fault, which is the same lazy mechanism with the +regular ring buffer. + +AUX events and AUX trace data are two different things. Let's see an +example:: + + perf record -a -e cycles -e cs_etm/@tmc_etr0/ -- sleep 2 + +The above command enables two events: one is the event *cycles* from PMU +and another is the AUX event *cs_etm* from Arm CoreSight, both are saved +into the regular ring buffer while the CoreSight's AUX trace data is +stored in the AUX ring buffer. + +As a result, we can see the regular ring buffer and the AUX ring buffer +are allocated in pairs. The perf in default mode allocates the regular +ring buffer and the AUX ring buffer per CPU-wise, which is the same as +the system wide mode, however, the default mode records samples only for +the profiled program, whereas the latter mode profiles for all programs +in the system. For per-thread mode, the perf tool allocates only one +regular ring buffer and one AUX ring buffer for the whole session. For +the per-CPU mode, the perf allocates two kinds of ring buffers for +selected CPUs specified by the option ``-C``. + +The below figure demonstrates the buffers' layout in the system wide +mode; if there are any activities on one CPU, the AUX event samples and +the hardware trace data will be recorded into the dedicated buffers for +the CPU. + +:: + + T1 T2 T1 + +----+ +-----------+ +----+ + CPU0 |xxxx| |xxxxxxxxxxx| |xxxx| + +----+--------------+-----------+----------+----+--------> + | | | + v v v + +-----------------------------------------------------+ + | Ring buffer 0 | + +-----------------------------------------------------+ + | | | + v v v + +-----------------------------------------------------+ + | AUX Ring buffer 0 | + +-----------------------------------------------------+ + + T1 + +-----+ + CPU1 |xxxxx| + -----+-----+---------------------------------------------> + | + v + +-----------------------------------------------------+ + | Ring buffer 1 | + +-----------------------------------------------------+ + | + v + +-----------------------------------------------------+ + | AUX Ring buffer 1 | + +-----------------------------------------------------+ + + T1 T3 + +----+ +-------+ + CPU2 |xxxx| |xxxxxxx| + --------------------------+----+--------+-------+--------> + | | + v v + +-----------------------------------------------------+ + | Ring buffer 2 | + +-----------------------------------------------------+ + | | + v v + +-----------------------------------------------------+ + | AUX Ring buffer 2 | + +-----------------------------------------------------+ + + T1 + +--------------+ + CPU3 |xxxxxxxxxxxxxx| + -----------+--------------+------------------------------> + | + v + +-----------------------------------------------------+ + | Ring buffer 3 | + +-----------------------------------------------------+ + | + v + +-----------------------------------------------------+ + | AUX Ring buffer 3 | + +-----------------------------------------------------+ + + T1: Thread 1; T2: Thread 2; T3: Thread 3 + x: Thread is in running state + + Figure 8. AUX ring buffer for system wide mode + +3.2 AUX events +-------------- + +Similar to ``perf_output_begin()`` and ``perf_output_end()``'s working for the +regular ring buffer, ``perf_aux_output_begin()`` and ``perf_aux_output_end()`` +serve for the AUX ring buffer for processing the hardware trace data. + +Once the hardware trace data is stored into the AUX ring buffer, the PMU +driver will stop hardware tracing by calling the ``pmu::stop()`` callback. +Similar to the regular ring buffer, the AUX ring buffer needs to apply +the memory synchronization mechanism as discussed in the section +:ref:`memory_synchronization`. Since the AUX ring buffer is managed by the +PMU driver, the barrier (B), which is a writing barrier to ensure the trace +data is externally visible prior to updating the head pointer, is asked +to be implemented in the PMU driver. + +Then ``pmu::stop()`` can safely call the ``perf_aux_output_end()`` function to +finish two things: + +- It fills an event ``PERF_RECORD_AUX`` into the regular ring buffer, this + event delivers the information of the start address and data size for a + chunk of hardware trace data has been stored into the AUX ring buffer; + +- Since the hardware trace driver has stored new trace data into the AUX + ring buffer, the argument *size* indicates how many bytes have been + consumed by the hardware tracing, thus ``perf_aux_output_end()`` updates the + header pointer ``perf_buffer::aux_head`` to reflect the latest buffer usage. + +At the end, the PMU driver will restart hardware tracing. During this +temporary suspending period, it will lose hardware trace data, which +will introduce a discontinuity during decoding phase. + +The event ``PERF_RECORD_AUX`` presents an AUX event which is handled in the +kernel, but it lacks the information for saving the AUX trace data in +the perf file. When the perf tool copies the trace data from AUX ring +buffer to the perf data file, it synthesizes a ``PERF_RECORD_AUXTRACE`` +event which is not a kernel ABI, it's defined by the perf tool to describe +which portion of data in the AUX ring buffer is saved. Afterwards, the perf +tool reads out the AUX trace data from the perf file based on the +``PERF_RECORD_AUXTRACE`` events, and the ``PERF_RECORD_AUX`` event is used to +decode a chunk of data by correlating with time order. + +3.3 Snapshot mode +----------------- + +Perf supports snapshot mode for AUX ring buffer, in this mode, users +only record AUX trace data at a specific time point which users are +interested in. E.g. below gives an example of how to take snapshots +with 1 second interval with Arm CoreSight:: + + perf record -e cs_etm/@tmc_etr0/u -S -a program & + PERFPID=$! + while true; do + kill -USR2 $PERFPID + sleep 1 + done + +The main flow for snapshot mode is: + +- Before a snapshot is taken, the AUX ring buffer acts in free run mode. + During free run mode the perf doesn't record any of the AUX events and + trace data; + +- Once the perf tool receives the *USR2* signal, it triggers the callback + function ``auxtrace_record::snapshot_start()`` to deactivate hardware + tracing. The kernel driver then populates the AUX ring buffer with the + hardware trace data, and the event ``PERF_RECORD_AUX`` is stored in the + regular ring buffer; + +- Then perf tool takes a snapshot, ``record__read_auxtrace_snapshot()`` + reads out the hardware trace data from the AUX ring buffer and saves it + into perf data file; + +- After the snapshot is finished, ``auxtrace_record::snapshot_finish()`` + restarts the PMU event for AUX tracing. + +The perf only accesses the head pointer ``perf_event_mmap_page::aux_head`` +in snapshot mode and doesn’t touch tail pointer ``aux_tail``, this is +because the AUX ring buffer can overflow in free run mode, the tail +pointer is useless in this case. Alternatively, the callback +``auxtrace_record::find_snapshot()`` is introduced for making the decision +of whether the AUX ring buffer has been wrapped around or not, at the +end it fixes up the AUX buffer's head which are used to calculate the +trace data size. + +As we know, the buffers' deployment can be per-thread mode, per-CPU +mode, or system wide mode, and the snapshot can be applied to any of +these modes. Below is an example of taking snapshot with system wide +mode. + +:: + + Snapshot is taken + | + v + +------------------------+ + | AUX Ring buffer 0 | <- aux_head + +------------------------+ + v + +--------------------------------+ + | AUX Ring buffer 1 | <- aux_head + +--------------------------------+ + v + +--------------------------------------------+ + | AUX Ring buffer 2 | <- aux_head + +--------------------------------------------+ + v + +---------------------------------------+ + | AUX Ring buffer 3 | <- aux_head + +---------------------------------------+ + + Figure 9. Snapshot with system wide mode |