diff options
Diffstat (limited to 'Documentation/virt')
| -rw-r--r-- | Documentation/virt/kvm/api.rst | 19 | ||||
| -rw-r--r-- | Documentation/virt/kvm/arm/fw-pseudo-registers.rst | 138 | ||||
| -rw-r--r-- | Documentation/virt/kvm/arm/hypercalls.rst | 180 | ||||
| -rw-r--r-- | Documentation/virt/kvm/arm/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/virt/kvm/arm/ptp_kvm.rst | 38 | ||||
| -rw-r--r-- | Documentation/virt/kvm/x86/amd-memory-encryption.rst | 101 | ||||
| -rw-r--r-- | Documentation/virt/kvm/x86/msr.rst | 19 |
7 files changed, 310 insertions, 186 deletions
diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index 0b5a33ee71ee..a71d91978d9e 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -4300,7 +4300,7 @@ operating system that uses the PIT for timing (e.g. Linux 2.4.x). 4.100 KVM_PPC_CONFIGURE_V3_MMU ------------------------------ -:Capability: KVM_CAP_PPC_RADIX_MMU or KVM_CAP_PPC_HASH_MMU_V3 +:Capability: KVM_CAP_PPC_MMU_RADIX or KVM_CAP_PPC_MMU_HASH_V3 :Architectures: ppc :Type: vm ioctl :Parameters: struct kvm_ppc_mmuv3_cfg (in) @@ -4334,7 +4334,7 @@ the Power ISA V3.00, Book III section 5.7.6.1. 4.101 KVM_PPC_GET_RMMU_INFO --------------------------- -:Capability: KVM_CAP_PPC_RADIX_MMU +:Capability: KVM_CAP_PPC_MMU_RADIX :Architectures: ppc :Type: vm ioctl :Parameters: struct kvm_ppc_rmmu_info (out) @@ -6316,7 +6316,7 @@ The "flags" field is reserved for future extensions and must be '0'. :Architectures: none :Type: vm ioctl :Parameters: struct kvm_create_guest_memfd(in) -:Returns: 0 on success, <0 on error +:Returns: A file descriptor on success, <0 on error KVM_CREATE_GUEST_MEMFD creates an anonymous file and returns a file descriptor that refers to it. guest_memfd files are roughly analogous to files created @@ -6894,6 +6894,13 @@ Note that KVM does not skip the faulting instruction as it does for KVM_EXIT_MMIO, but userspace has to emulate any change to the processing state if it decides to decode and emulate the instruction. +This feature isn't available to protected VMs, as userspace does not +have access to the state that is required to perform the emulation. +Instead, a data abort exception is directly injected in the guest. +Note that although KVM_CAP_ARM_NISV_TO_USER will be reported if +queried outside of a protected VM context, the feature will not be +exposed if queried on a protected VM file descriptor. + :: /* KVM_EXIT_X86_RDMSR / KVM_EXIT_X86_WRMSR */ @@ -8095,7 +8102,7 @@ capability via KVM_ENABLE_CAP ioctl on the vcpu fd. Note that this will disable the use of APIC hardware virtualization even if supported by the CPU, as it's incompatible with SynIC auto-EOI behavior. -8.3 KVM_CAP_PPC_RADIX_MMU +8.3 KVM_CAP_PPC_MMU_RADIX ------------------------- :Architectures: ppc @@ -8105,7 +8112,7 @@ available, means that the kernel can support guests using the radix MMU defined in Power ISA V3.00 (as implemented in the POWER9 processor). -8.4 KVM_CAP_PPC_HASH_MMU_V3 +8.4 KVM_CAP_PPC_MMU_HASH_V3 --------------------------- :Architectures: ppc @@ -8819,6 +8826,8 @@ means the VM type with value @n is supported. Possible values of @n are:: #define KVM_X86_DEFAULT_VM 0 #define KVM_X86_SW_PROTECTED_VM 1 + #define KVM_X86_SEV_VM 2 + #define KVM_X86_SEV_ES_VM 3 Note, KVM_X86_SW_PROTECTED_VM is currently only for development and testing. Do not use KVM_X86_SW_PROTECTED_VM for "real" VMs, and especially not in diff --git a/Documentation/virt/kvm/arm/fw-pseudo-registers.rst b/Documentation/virt/kvm/arm/fw-pseudo-registers.rst new file mode 100644 index 000000000000..b90fd0b0fa66 --- /dev/null +++ b/Documentation/virt/kvm/arm/fw-pseudo-registers.rst @@ -0,0 +1,138 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================================= +ARM firmware pseudo-registers interface +======================================= + +KVM handles the hypercall services as requested by the guests. New hypercall +services are regularly made available by the ARM specification or by KVM (as +vendor services) if they make sense from a virtualization point of view. + +This means that a guest booted on two different versions of KVM can observe +two different "firmware" revisions. This could cause issues if a given guest +is tied to a particular version of a hypercall service, or if a migration +causes a different version to be exposed out of the blue to an unsuspecting +guest. + +In order to remedy this situation, KVM exposes a set of "firmware +pseudo-registers" that can be manipulated using the GET/SET_ONE_REG +interface. These registers can be saved/restored by userspace, and set +to a convenient value as required. + +The following registers are defined: + +* KVM_REG_ARM_PSCI_VERSION: + + KVM implements the PSCI (Power State Coordination Interface) + specification in order to provide services such as CPU on/off, reset + and power-off to the guest. + + - Only valid if the vcpu has the KVM_ARM_VCPU_PSCI_0_2 feature set + (and thus has already been initialized) + - Returns the current PSCI version on GET_ONE_REG (defaulting to the + highest PSCI version implemented by KVM and compatible with v0.2) + - Allows any PSCI version implemented by KVM and compatible with + v0.2 to be set with SET_ONE_REG + - Affects the whole VM (even if the register view is per-vcpu) + +* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1: + Holds the state of the firmware support to mitigate CVE-2017-5715, as + offered by KVM to the guest via a HVC call. The workaround is described + under SMCCC_ARCH_WORKAROUND_1 in [1]. + + Accepted values are: + + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL: + KVM does not offer + firmware support for the workaround. The mitigation status for the + guest is unknown. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL: + The workaround HVC call is + available to the guest and required for the mitigation. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED: + The workaround HVC call + is available to the guest, but it is not needed on this VCPU. + +* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2: + Holds the state of the firmware support to mitigate CVE-2018-3639, as + offered by KVM to the guest via a HVC call. The workaround is described + under SMCCC_ARCH_WORKAROUND_2 in [1]_. + + Accepted values are: + + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL: + A workaround is not + available. KVM does not offer firmware support for the workaround. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN: + The workaround state is + unknown. KVM does not offer firmware support for the workaround. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL: + The workaround is available, + and can be disabled by a vCPU. If + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED is set, it is active for + this vCPU. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED: + The workaround is always active on this vCPU or it is not needed. + + +Bitmap Feature Firmware Registers +--------------------------------- + +Contrary to the above registers, the following registers exposes the +hypercall services in the form of a feature-bitmap to the userspace. This +bitmap is translated to the services that are available to the guest. +There is a register defined per service call owner and can be accessed via +GET/SET_ONE_REG interface. + +By default, these registers are set with the upper limit of the features +that are supported. This way userspace can discover all the usable +hypercall services via GET_ONE_REG. The user-space can write-back the +desired bitmap back via SET_ONE_REG. The features for the registers that +are untouched, probably because userspace isn't aware of them, will be +exposed as is to the guest. + +Note that KVM will not allow the userspace to configure the registers +anymore once any of the vCPUs has run at least once. Instead, it will +return a -EBUSY. + +The pseudo-firmware bitmap register are as follows: + +* KVM_REG_ARM_STD_BMAP: + Controls the bitmap of the ARM Standard Secure Service Calls. + + The following bits are accepted: + + Bit-0: KVM_REG_ARM_STD_BIT_TRNG_V1_0: + The bit represents the services offered under v1.0 of ARM True Random + Number Generator (TRNG) specification, ARM DEN0098. + +* KVM_REG_ARM_STD_HYP_BMAP: + Controls the bitmap of the ARM Standard Hypervisor Service Calls. + + The following bits are accepted: + + Bit-0: KVM_REG_ARM_STD_HYP_BIT_PV_TIME: + The bit represents the Paravirtualized Time service as represented by + ARM DEN0057A. + +* KVM_REG_ARM_VENDOR_HYP_BMAP: + Controls the bitmap of the Vendor specific Hypervisor Service Calls. + + The following bits are accepted: + + Bit-0: KVM_REG_ARM_VENDOR_HYP_BIT_FUNC_FEAT + The bit represents the ARM_SMCCC_VENDOR_HYP_KVM_FEATURES_FUNC_ID + and ARM_SMCCC_VENDOR_HYP_CALL_UID_FUNC_ID function-ids. + + Bit-1: KVM_REG_ARM_VENDOR_HYP_BIT_PTP: + The bit represents the Precision Time Protocol KVM service. + +Errors: + + ======= ============================================================= + -ENOENT Unknown register accessed. + -EBUSY Attempt a 'write' to the register after the VM has started. + -EINVAL Invalid bitmap written to the register. + ======= ============================================================= + +.. [1] https://developer.arm.com/-/media/developer/pdf/ARM_DEN_0070A_Firmware_interfaces_for_mitigating_CVE-2017-5715.pdf diff --git a/Documentation/virt/kvm/arm/hypercalls.rst b/Documentation/virt/kvm/arm/hypercalls.rst index 3e23084644ba..17be111f493f 100644 --- a/Documentation/virt/kvm/arm/hypercalls.rst +++ b/Documentation/virt/kvm/arm/hypercalls.rst @@ -1,138 +1,46 @@ .. SPDX-License-Identifier: GPL-2.0 -======================= -ARM Hypercall Interface -======================= - -KVM handles the hypercall services as requested by the guests. New hypercall -services are regularly made available by the ARM specification or by KVM (as -vendor services) if they make sense from a virtualization point of view. - -This means that a guest booted on two different versions of KVM can observe -two different "firmware" revisions. This could cause issues if a given guest -is tied to a particular version of a hypercall service, or if a migration -causes a different version to be exposed out of the blue to an unsuspecting -guest. - -In order to remedy this situation, KVM exposes a set of "firmware -pseudo-registers" that can be manipulated using the GET/SET_ONE_REG -interface. These registers can be saved/restored by userspace, and set -to a convenient value as required. - -The following registers are defined: - -* KVM_REG_ARM_PSCI_VERSION: - - KVM implements the PSCI (Power State Coordination Interface) - specification in order to provide services such as CPU on/off, reset - and power-off to the guest. - - - Only valid if the vcpu has the KVM_ARM_VCPU_PSCI_0_2 feature set - (and thus has already been initialized) - - Returns the current PSCI version on GET_ONE_REG (defaulting to the - highest PSCI version implemented by KVM and compatible with v0.2) - - Allows any PSCI version implemented by KVM and compatible with - v0.2 to be set with SET_ONE_REG - - Affects the whole VM (even if the register view is per-vcpu) - -* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1: - Holds the state of the firmware support to mitigate CVE-2017-5715, as - offered by KVM to the guest via a HVC call. The workaround is described - under SMCCC_ARCH_WORKAROUND_1 in [1]. - - Accepted values are: - - KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL: - KVM does not offer - firmware support for the workaround. The mitigation status for the - guest is unknown. - KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL: - The workaround HVC call is - available to the guest and required for the mitigation. - KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED: - The workaround HVC call - is available to the guest, but it is not needed on this VCPU. - -* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2: - Holds the state of the firmware support to mitigate CVE-2018-3639, as - offered by KVM to the guest via a HVC call. The workaround is described - under SMCCC_ARCH_WORKAROUND_2 in [1]_. - - Accepted values are: - - KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL: - A workaround is not - available. KVM does not offer firmware support for the workaround. - KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN: - The workaround state is - unknown. KVM does not offer firmware support for the workaround. - KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL: - The workaround is available, - and can be disabled by a vCPU. If - KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED is set, it is active for - this vCPU. - KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED: - The workaround is always active on this vCPU or it is not needed. - - -Bitmap Feature Firmware Registers ---------------------------------- - -Contrary to the above registers, the following registers exposes the -hypercall services in the form of a feature-bitmap to the userspace. This -bitmap is translated to the services that are available to the guest. -There is a register defined per service call owner and can be accessed via -GET/SET_ONE_REG interface. - -By default, these registers are set with the upper limit of the features -that are supported. This way userspace can discover all the usable -hypercall services via GET_ONE_REG. The user-space can write-back the -desired bitmap back via SET_ONE_REG. The features for the registers that -are untouched, probably because userspace isn't aware of them, will be -exposed as is to the guest. - -Note that KVM will not allow the userspace to configure the registers -anymore once any of the vCPUs has run at least once. Instead, it will -return a -EBUSY. - -The pseudo-firmware bitmap register are as follows: - -* KVM_REG_ARM_STD_BMAP: - Controls the bitmap of the ARM Standard Secure Service Calls. - - The following bits are accepted: - - Bit-0: KVM_REG_ARM_STD_BIT_TRNG_V1_0: - The bit represents the services offered under v1.0 of ARM True Random - Number Generator (TRNG) specification, ARM DEN0098. - -* KVM_REG_ARM_STD_HYP_BMAP: - Controls the bitmap of the ARM Standard Hypervisor Service Calls. - - The following bits are accepted: - - Bit-0: KVM_REG_ARM_STD_HYP_BIT_PV_TIME: - The bit represents the Paravirtualized Time service as represented by - ARM DEN0057A. - -* KVM_REG_ARM_VENDOR_HYP_BMAP: - Controls the bitmap of the Vendor specific Hypervisor Service Calls. - - The following bits are accepted: - - Bit-0: KVM_REG_ARM_VENDOR_HYP_BIT_FUNC_FEAT - The bit represents the ARM_SMCCC_VENDOR_HYP_KVM_FEATURES_FUNC_ID - and ARM_SMCCC_VENDOR_HYP_CALL_UID_FUNC_ID function-ids. - - Bit-1: KVM_REG_ARM_VENDOR_HYP_BIT_PTP: - The bit represents the Precision Time Protocol KVM service. - -Errors: - - ======= ============================================================= - -ENOENT Unknown register accessed. - -EBUSY Attempt a 'write' to the register after the VM has started. - -EINVAL Invalid bitmap written to the register. - ======= ============================================================= - -.. [1] https://developer.arm.com/-/media/developer/pdf/ARM_DEN_0070A_Firmware_interfaces_for_mitigating_CVE-2017-5715.pdf +=============================================== +KVM/arm64-specific hypercalls exposed to guests +=============================================== + +This file documents the KVM/arm64-specific hypercalls which may be +exposed by KVM/arm64 to guest operating systems. These hypercalls are +issued using the HVC instruction according to version 1.1 of the Arm SMC +Calling Convention (DEN0028/C): + +https://developer.arm.com/docs/den0028/c + +All KVM/arm64-specific hypercalls are allocated within the "Vendor +Specific Hypervisor Service Call" range with a UID of +``28b46fb6-2ec5-11e9-a9ca-4b564d003a74``. This UID should be queried by the +guest using the standard "Call UID" function for the service range in +order to determine that the KVM/arm64-specific hypercalls are available. + +``ARM_SMCCC_VENDOR_HYP_KVM_FEATURES_FUNC_ID`` +--------------------------------------------- + +Provides a discovery mechanism for other KVM/arm64 hypercalls. + ++---------------------+-------------------------------------------------------------+ +| Presence: | Mandatory for the KVM/arm64 UID | ++---------------------+-------------------------------------------------------------+ +| Calling convention: | HVC32 | ++---------------------+----------+--------------------------------------------------+ +| Function ID: | (uint32) | 0x86000000 | ++---------------------+----------+--------------------------------------------------+ +| Arguments: | None | ++---------------------+----------+----+---------------------------------------------+ +| Return Values: | (uint32) | R0 | Bitmap of available function numbers 0-31 | +| +----------+----+---------------------------------------------+ +| | (uint32) | R1 | Bitmap of available function numbers 32-63 | +| +----------+----+---------------------------------------------+ +| | (uint32) | R2 | Bitmap of available function numbers 64-95 | +| +----------+----+---------------------------------------------+ +| | (uint32) | R3 | Bitmap of available function numbers 96-127 | ++---------------------+----------+----+---------------------------------------------+ + +``ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID`` +---------------------------------------- + +See ptp_kvm.rst diff --git a/Documentation/virt/kvm/arm/index.rst b/Documentation/virt/kvm/arm/index.rst index 7f231c724e16..ec09881de4cf 100644 --- a/Documentation/virt/kvm/arm/index.rst +++ b/Documentation/virt/kvm/arm/index.rst @@ -7,6 +7,7 @@ ARM .. toctree:: :maxdepth: 2 + fw-pseudo-registers hyp-abi hypercalls pvtime diff --git a/Documentation/virt/kvm/arm/ptp_kvm.rst b/Documentation/virt/kvm/arm/ptp_kvm.rst index aecdc80ddcd8..7c0960970a0e 100644 --- a/Documentation/virt/kvm/arm/ptp_kvm.rst +++ b/Documentation/virt/kvm/arm/ptp_kvm.rst @@ -7,19 +7,29 @@ PTP_KVM is used for high precision time sync between host and guests. It relies on transferring the wall clock and counter value from the host to the guest using a KVM-specific hypercall. -* ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID: 0x86000001 +``ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID`` +---------------------------------------- -This hypercall uses the SMC32/HVC32 calling convention: +Retrieve current time information for the specific counter. There are no +endianness restrictions. -ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID - ============== ======== ===================================== - Function ID: (uint32) 0x86000001 - Arguments: (uint32) KVM_PTP_VIRT_COUNTER(0) - KVM_PTP_PHYS_COUNTER(1) - Return Values: (int32) NOT_SUPPORTED(-1) on error, or - (uint32) Upper 32 bits of wall clock time (r0) - (uint32) Lower 32 bits of wall clock time (r1) - (uint32) Upper 32 bits of counter (r2) - (uint32) Lower 32 bits of counter (r3) - Endianness: No Restrictions. - ============== ======== ===================================== ++---------------------+-------------------------------------------------------+ +| Presence: | Optional | ++---------------------+-------------------------------------------------------+ +| Calling convention: | HVC32 | ++---------------------+----------+--------------------------------------------+ +| Function ID: | (uint32) | 0x86000001 | ++---------------------+----------+----+---------------------------------------+ +| Arguments: | (uint32) | R1 | ``KVM_PTP_VIRT_COUNTER (0)`` | +| | | +---------------------------------------+ +| | | | ``KVM_PTP_PHYS_COUNTER (1)`` | ++---------------------+----------+----+---------------------------------------+ +| Return Values: | (int32) | R0 | ``NOT_SUPPORTED (-1)`` on error, else | +| | | | upper 32 bits of wall clock time | +| +----------+----+---------------------------------------+ +| | (uint32) | R1 | Lower 32 bits of wall clock time | +| +----------+----+---------------------------------------+ +| | (uint32) | R2 | Upper 32 bits of counter | +| +----------+----+---------------------------------------+ +| | (uint32) | R3 | Lower 32 bits of counter | ++---------------------+----------+----+---------------------------------------+ diff --git a/Documentation/virt/kvm/x86/amd-memory-encryption.rst b/Documentation/virt/kvm/x86/amd-memory-encryption.rst index 995780088eb2..9677a0714a39 100644 --- a/Documentation/virt/kvm/x86/amd-memory-encryption.rst +++ b/Documentation/virt/kvm/x86/amd-memory-encryption.rst @@ -46,21 +46,16 @@ SEV hardware uses ASIDs to associate a memory encryption key with a VM. Hence, the ASID for the SEV-enabled guests must be from 1 to a maximum value defined in the CPUID 0x8000001f[ecx] field. -SEV Key Management -================== +The KVM_MEMORY_ENCRYPT_OP ioctl +=============================== -The SEV guest key management is handled by a separate processor called the AMD -Secure Processor (AMD-SP). Firmware running inside the AMD-SP provides a secure -key management interface to perform common hypervisor activities such as -encrypting bootstrap code, snapshot, migrating and debugging the guest. For more -information, see the SEV Key Management spec [api-spec]_ - -The main ioctl to access SEV is KVM_MEMORY_ENCRYPT_OP. If the argument -to KVM_MEMORY_ENCRYPT_OP is NULL, the ioctl returns 0 if SEV is enabled -and ``ENOTTY`` if it is disabled (on some older versions of Linux, -the ioctl runs normally even with a NULL argument, and therefore will -likely return ``EFAULT``). If non-NULL, the argument to KVM_MEMORY_ENCRYPT_OP -must be a struct kvm_sev_cmd:: +The main ioctl to access SEV is KVM_MEMORY_ENCRYPT_OP, which operates on +the VM file descriptor. If the argument to KVM_MEMORY_ENCRYPT_OP is NULL, +the ioctl returns 0 if SEV is enabled and ``ENOTTY`` if it is disabled +(on some older versions of Linux, the ioctl tries to run normally even +with a NULL argument, and therefore will likely return ``EFAULT`` instead +of zero if SEV is enabled). If non-NULL, the argument to +KVM_MEMORY_ENCRYPT_OP must be a struct kvm_sev_cmd:: struct kvm_sev_cmd { __u32 id; @@ -81,19 +76,56 @@ are defined in ``<linux/psp-dev.h>``. KVM implements the following commands to support common lifecycle events of SEV guests, such as launching, running, snapshotting, migrating and decommissioning. -1. KVM_SEV_INIT ---------------- +1. KVM_SEV_INIT2 +---------------- -The KVM_SEV_INIT command is used by the hypervisor to initialize the SEV platform +The KVM_SEV_INIT2 command is used by the hypervisor to initialize the SEV platform context. In a typical workflow, this command should be the first command issued. -The firmware can be initialized either by using its own non-volatile storage or -the OS can manage the NV storage for the firmware using the module parameter -``init_ex_path``. If the file specified by ``init_ex_path`` does not exist or -is invalid, the OS will create or override the file with output from PSP. +For this command to be accepted, either KVM_X86_SEV_VM or KVM_X86_SEV_ES_VM +must have been passed to the KVM_CREATE_VM ioctl. A virtual machine created +with those machine types in turn cannot be run until KVM_SEV_INIT2 is invoked. + +Parameters: struct kvm_sev_init (in) Returns: 0 on success, -negative on error +:: + + struct kvm_sev_init { + __u64 vmsa_features; /* initial value of features field in VMSA */ + __u32 flags; /* must be 0 */ + __u16 ghcb_version; /* maximum guest GHCB version allowed */ + __u16 pad1; + __u32 pad2[8]; + }; + +It is an error if the hypervisor does not support any of the bits that +are set in ``flags`` or ``vmsa_features``. ``vmsa_features`` must be +0 for SEV virtual machines, as they do not have a VMSA. + +``ghcb_version`` must be 0 for SEV virtual machines, as they do not issue GHCB +requests. If ``ghcb_version`` is 0 for any other guest type, then the maximum +allowed guest GHCB protocol will default to version 2. + +This command replaces the deprecated KVM_SEV_INIT and KVM_SEV_ES_INIT commands. +The commands did not have any parameters (the ```data``` field was unused) and +only work for the KVM_X86_DEFAULT_VM machine type (0). + +They behave as if: + +* the VM type is KVM_X86_SEV_VM for KVM_SEV_INIT, or KVM_X86_SEV_ES_VM for + KVM_SEV_ES_INIT + +* the ``flags`` and ``vmsa_features`` fields of ``struct kvm_sev_init`` are + set to zero, and ``ghcb_version`` is set to 0 for KVM_SEV_INIT and 1 for + KVM_SEV_ES_INIT. + +If the ``KVM_X86_SEV_VMSA_FEATURES`` attribute does not exist, the hypervisor only +supports KVM_SEV_INIT and KVM_SEV_ES_INIT. In that case, note that KVM_SEV_ES_INIT +might set the debug swap VMSA feature (bit 5) depending on the value of the +``debug_swap`` parameter of ``kvm-amd.ko``. + 2. KVM_SEV_LAUNCH_START ----------------------- @@ -434,6 +466,33 @@ issued by the hypervisor to make the guest ready for execution. Returns: 0 on success, -negative on error +Device attribute API +==================== + +Attributes of the SEV implementation can be retrieved through the +``KVM_HAS_DEVICE_ATTR`` and ``KVM_GET_DEVICE_ATTR`` ioctls on the ``/dev/kvm`` +device node, using group ``KVM_X86_GRP_SEV``. + +Currently only one attribute is implemented: + +* ``KVM_X86_SEV_VMSA_FEATURES``: return the set of all bits that + are accepted in the ``vmsa_features`` of ``KVM_SEV_INIT2``. + +Firmware Management +=================== + +The SEV guest key management is handled by a separate processor called the AMD +Secure Processor (AMD-SP). Firmware running inside the AMD-SP provides a secure +key management interface to perform common hypervisor activities such as +encrypting bootstrap code, snapshot, migrating and debugging the guest. For more +information, see the SEV Key Management spec [api-spec]_ + +The AMD-SP firmware can be initialized either by using its own non-volatile +storage or the OS can manage the NV storage for the firmware using +parameter ``init_ex_path`` of the ``ccp`` module. If the file specified +by ``init_ex_path`` does not exist or is invalid, the OS will create or +override the file with PSP non-volatile storage. + References ========== diff --git a/Documentation/virt/kvm/x86/msr.rst b/Documentation/virt/kvm/x86/msr.rst index 9315fc385fb0..3aecf2a70e7b 100644 --- a/Documentation/virt/kvm/x86/msr.rst +++ b/Documentation/virt/kvm/x86/msr.rst @@ -193,8 +193,8 @@ data: Asynchronous page fault (APF) control MSR. Bits 63-6 hold 64-byte aligned physical address of a 64 byte memory area - which must be in guest RAM and must be zeroed. This memory is expected - to hold a copy of the following structure:: + which must be in guest RAM. This memory is expected to hold the + following structure:: struct kvm_vcpu_pv_apf_data { /* Used for 'page not present' events delivered via #PF */ @@ -204,7 +204,6 @@ data: __u32 token; __u8 pad[56]; - __u32 enabled; }; Bits 5-4 of the MSR are reserved and should be zero. Bit 0 is set to 1 @@ -232,14 +231,14 @@ data: as regular page fault, guest must reset 'flags' to '0' before it does something that can generate normal page fault. - Bytes 5-7 of 64 byte memory location ('token') will be written to by the + Bytes 4-7 of 64 byte memory location ('token') will be written to by the hypervisor at the time of APF 'page ready' event injection. The content - of these bytes is a token which was previously delivered as 'page not - present' event. The event indicates the page in now available. Guest is - supposed to write '0' to 'token' when it is done handling 'page ready' - event and to write 1' to MSR_KVM_ASYNC_PF_ACK after clearing the location; - writing to the MSR forces KVM to re-scan its queue and deliver the next - pending notification. + of these bytes is a token which was previously delivered in CR2 as + 'page not present' event. The event indicates the page is now available. + Guest is supposed to write '0' to 'token' when it is done handling + 'page ready' event and to write '1' to MSR_KVM_ASYNC_PF_ACK after + clearing the location; writing to the MSR forces KVM to re-scan its + queue and deliver the next pending notification. Note, MSR_KVM_ASYNC_PF_INT MSR specifying the interrupt vector for 'page ready' APF delivery needs to be written to before enabling APF mechanism |