summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/admin-guide/pm/cpufreq.rst8
-rw-r--r--Documentation/device-mapper/dm-raid.txt1
-rw-r--r--Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt2
-rw-r--r--Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt1
-rw-r--r--Documentation/devicetree/bindings/mmc/img-dw-mshc.txt1
-rw-r--r--Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt2
-rw-r--r--Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt16
-rw-r--r--Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt1
-rw-r--r--Documentation/power/runtime_pm.txt3
9 files changed, 18 insertions, 17 deletions
diff --git a/Documentation/admin-guide/pm/cpufreq.rst b/Documentation/admin-guide/pm/cpufreq.rst
index 463cf7e73db8..7af83a92d2d6 100644
--- a/Documentation/admin-guide/pm/cpufreq.rst
+++ b/Documentation/admin-guide/pm/cpufreq.rst
@@ -237,6 +237,14 @@ are the following:
This attribute is not present if the scaling driver in use does not
support it.
+``cpuinfo_cur_freq``
+ Current frequency of the CPUs belonging to this policy as obtained from
+ the hardware (in KHz).
+
+ This is expected to be the frequency the hardware actually runs at.
+ If that frequency cannot be determined, this attribute should not
+ be present.
+
``cpuinfo_max_freq``
Maximum possible operating frequency the CPUs belonging to this policy
can run at (in kHz).
diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt
index 7e06e65586d4..4a0a7469fdd7 100644
--- a/Documentation/device-mapper/dm-raid.txt
+++ b/Documentation/device-mapper/dm-raid.txt
@@ -343,3 +343,4 @@ Version History
1.11.0 Fix table line argument order
(wrong raid10_copies/raid10_format sequence)
1.11.1 Add raid4/5/6 journal write-back support via journal_mode option
+1.12.1 fix for MD deadlock between mddev_suspend() and md_write_start() available
diff --git a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt
index f69773f4252b..941bb6a6fb13 100644
--- a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt
+++ b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt
@@ -8,7 +8,6 @@ Required properties:
Optional properties:
- clocks: Reference to the crypto engine clock.
-- dma-mask: The address mask limitation. Defaults to 64.
Example:
@@ -24,6 +23,5 @@ Example:
interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3",
"eip";
clocks = <&cpm_syscon0 1 26>;
- dma-mask = <0xff 0xffffffff>;
status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
index aad98442788b..a58c173b7ab9 100644
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
@@ -78,7 +78,6 @@ Example:
};
dwmmc0@12200000 {
- num-slots = <1>;
cap-mmc-highspeed;
cap-sd-highspeed;
broken-cd;
diff --git a/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt
index 85de99fcaa2f..c54e577eea07 100644
--- a/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt
@@ -24,6 +24,5 @@ Example:
fifo-depth = <0x20>;
bus-width = <4>;
- num-slots = <1>;
disable-wp;
};
diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
index 8af1afcb86dc..07242d141773 100644
--- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
@@ -36,7 +36,6 @@ Example:
/* Board portion */
dwmmc0@fcd03000 {
- num-slots = <1>;
vmmc-supply = <&ldo12>;
fifo-depth = <0x100>;
pinctrl-names = "default";
@@ -52,7 +51,6 @@ Example:
dwmmc_1: dwmmc1@f723e000 {
compatible = "hisilicon,hi6220-dw-mshc";
- num-slots = <0x1>;
bus-width = <0x4>;
disable-wp;
cap-sd-highspeed;
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
index 9cb55ca57461..ef3e5f14067a 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
@@ -12,12 +12,12 @@ Required Properties:
* #address-cells: should be 1.
* #size-cells: should be 0.
-# Slots: The slot specific information are contained within child-nodes with
- each child-node representing a supported slot. There should be atleast one
- child node representing a card slot. The name of the child node representing
- the slot is recommended to be slot@n where n is the unique number of the slot
- connected to the controller. The following are optional properties which
- can be included in the slot child node.
+# Slots (DEPRECATED): The slot specific information are contained within
+ child-nodes with each child-node representing a supported slot. There should
+ be atleast one child node representing a card slot. The name of the child node
+ representing the slot is recommended to be slot@n where n is the unique number
+ of the slot connected to the controller. The following are optional properties
+ which can be included in the slot child node.
* reg: specifies the physical slot number. The valid values of this
property is 0 to (num-slots -1), where num-slots is the value
@@ -63,7 +63,7 @@ Optional properties:
clock(cclk_out). If it's not specified, max is 200MHZ and min is 400KHz by default.
(Use the "max-frequency" instead of "clock-freq-min-max".)
-* num-slots: specifies the number of slots supported by the controller.
+* num-slots (DEPRECATED): specifies the number of slots supported by the controller.
The number of physical slots actually used could be equal or less than the
value specified by num-slots. If this property is not specified, the value
of num-slot property is assumed to be 1.
@@ -124,7 +124,6 @@ board specific portions as listed below.
dwmmc0@12200000 {
clock-frequency = <400000000>;
clock-freq-min-max = <400000 200000000>;
- num-slots = <1>;
broken-cd;
fifo-depth = <0x80>;
card-detect-delay = <200>;
@@ -139,7 +138,6 @@ board specific portions as listed below.
dwmmc0@12200000 {
clock-frequency = <400000000>;
clock-freq-min-max = <400000 200000000>;
- num-slots = <1>;
broken-cd;
fifo-depth = <0x80>;
card-detect-delay = <200>;
diff --git a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
index eaade0e5adeb..906819a90c2b 100644
--- a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
@@ -25,7 +25,6 @@ Example:
clock-frequency = <50000000>;
clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>;
clock-names = "biu", "ciu";
- num-slots = <1>;
max-frequency = <50000000>;
cap-sdio-irq;
cap-sd-highspeed;
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index 0fde3dcf077a..625549d4c74a 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -435,7 +435,8 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
PM status to 'suspended' and update its parent's counter of 'active'
children as appropriate (it is only valid to use this function if
'power.runtime_error' is set or 'power.disable_depth' is greater than
- zero)
+ zero); it will fail and return an error code if the device has a child
+ which is active and the 'power.ignore_children' flag is unset
bool pm_runtime_active(struct device *dev);
- return true if the device's runtime PM status is 'active' or its