summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt40
-rw-r--r--Documentation/devicetree/bindings/watchdog/meson-wdt.txt6
-rw-r--r--Documentation/devicetree/bindings/watchdog/mtk-wdt.txt2
-rw-r--r--Documentation/devicetree/bindings/watchdog/renesas-wdt.txt1
-rw-r--r--Documentation/watchdog/watchdog-parameters.txt2
5 files changed, 49 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
index c5e74d7b4406..c5077a1f5cb3 100644
--- a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
@@ -8,9 +8,49 @@ Required properties:
- reg: physical base address of the controller and length of memory mapped
region
+Optional properties:
+
+ - aspeed,reset-type = "cpu|soc|system|none"
+
+ Reset behavior - Whenever a timeout occurs the watchdog can be programmed
+ to generate one of three different, mutually exclusive, types of resets.
+
+ Type "none" can be specified to indicate that no resets are to be done.
+ This is useful in situations where another watchdog engine on chip is
+ to perform the reset.
+
+ If 'aspeed,reset-type=' is not specfied the default is to enable system
+ reset.
+
+ Reset types:
+
+ - cpu: Reset CPU on watchdog timeout
+
+ - soc: Reset 'System on Chip' on watchdog timeout
+
+ - system: Reset system on watchdog timeout
+
+ - none: No reset is performed on timeout. Assumes another watchdog
+ engine is responsible for this.
+
+ - aspeed,alt-boot: If property is present then boot from alternate block.
+ - aspeed,external-signal: If property is present then signal is sent to
+ external reset counter (only WDT1 and WDT2). If not
+ specified no external signal is sent.
+ - aspeed,ext-pulse-duration: External signal pulse duration in microseconds
+
+Optional properties for AST2500-compatible watchdogs:
+ - aspeed,ext-push-pull: If aspeed,external-signal is present, set the pin's
+ drive type to push-pull. The default is open-drain.
+ - aspeed,ext-active-high: If aspeed,external-signal is present and and the pin
+ is configured as push-pull, then set the pulse
+ polarity to active-high. The default is active-low.
+
Example:
wdt1: watchdog@1e785000 {
compatible = "aspeed,ast2400-wdt";
reg = <0x1e785000 0x1c>;
+ aspeed,reset-type = "system";
+ aspeed,external-signal;
};
diff --git a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
index ae70185d96e6..8a6d84cb36c9 100644
--- a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
@@ -2,7 +2,11 @@ Meson SoCs Watchdog timer
Required properties:
-- compatible : should be "amlogic,meson6-wdt" or "amlogic,meson8b-wdt"
+- compatible : depending on the SoC this should be one of:
+ "amlogic,meson6-wdt" on Meson6 SoCs
+ "amlogic,meson8-wdt" and "amlogic,meson6-wdt" on Meson8 SoCs
+ "amlogic,meson8b-wdt" on Meson8b SoCs
+ "amlogic,meson8m2-wdt" and "amlogic,meson8b-wdt" on Meson8m2 SoCs
- reg : Specifies base physical address and size of the registers.
Example:
diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
index 20ada673ab0c..235de0683bb6 100644
--- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
@@ -6,6 +6,8 @@ Required properties:
"mediatek,mt2701-wdt", "mediatek,mt6589-wdt": for MT2701
"mediatek,mt6589-wdt": for MT6589
"mediatek,mt6797-wdt", "mediatek,mt6589-wdt": for MT6797
+ "mediatek,mt7622-wdt", "mediatek,mt6589-wdt": for MT7622
+ "mediatek,mt7623-wdt", "mediatek,mt6589-wdt": for MT7623
- reg : Specifies base physical address and size of the registers.
diff --git a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
index 9e306afbbd49..bf6d1ca58af7 100644
--- a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
@@ -6,6 +6,7 @@ Required properties:
Examples with soctypes are:
- "renesas,r8a7795-wdt" (R-Car H3)
- "renesas,r8a7796-wdt" (R-Car M3-W)
+ - "renesas,r8a77995-wdt" (R-Car D3)
- "renesas,r7s72100-wdt" (RZ/A1)
When compatible with the generic version, nodes must list the SoC-specific
diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt
index b3526365ea8e..6f9d7b418917 100644
--- a/Documentation/watchdog/watchdog-parameters.txt
+++ b/Documentation/watchdog/watchdog-parameters.txt
@@ -117,7 +117,7 @@ nowayout: Watchdog cannot be stopped once started
-------------------------------------------------
iTCO_wdt:
heartbeat: Watchdog heartbeat in seconds.
- (5<=heartbeat<=74 (TCO v1) or 1226 (TCO v2), default=30)
+ (2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=30)
nowayout: Watchdog cannot be stopped once started
(default=kernel config parameter)
-------------------------------------------------