summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/00-INDEX428
-rw-r--r--Documentation/ABI/stable/sysfs-driver-usb-usbtmc35
-rw-r--r--Documentation/ABI/testing/configfs-stp-policy-p_sys-t41
-rw-r--r--Documentation/ABI/testing/configfs-usb-gadget-uvc24
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio2
-rw-r--r--Documentation/ABI/testing/sysfs-bus-pci24
-rw-r--r--Documentation/ABI/testing/sysfs-bus-usb19
-rw-r--r--Documentation/ABI/testing/sysfs-bus-vmbus21
-rw-r--r--Documentation/ABI/testing/sysfs-class-lcd-s6e63m027
-rw-r--r--Documentation/ABI/testing/sysfs-class-led-driver-sc27xx22
-rw-r--r--Documentation/ABI/testing/sysfs-class-led-trigger-pattern82
-rw-r--r--Documentation/ABI/testing/sysfs-class-net22
-rw-r--r--Documentation/ABI/testing/sysfs-class-net-dsa7
-rw-r--r--Documentation/ABI/testing/sysfs-fs-f2fs17
-rw-r--r--Documentation/ABI/testing/sysfs-platform-lg-laptop35
-rw-r--r--Documentation/ABI/testing/sysfs-power2
-rw-r--r--Documentation/PCI/00-INDEX26
-rw-r--r--Documentation/PCI/endpoint/pci-test-howto.txt19
-rw-r--r--Documentation/PCI/pci-error-recovery.txt35
-rw-r--r--Documentation/RCU/00-INDEX34
-rw-r--r--Documentation/RCU/Design/Data-Structures/Data-Structures.html31
-rw-r--r--Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html9
-rw-r--r--Documentation/RCU/Design/Requirements/Requirements.html214
-rw-r--r--Documentation/RCU/rcu.txt4
-rw-r--r--Documentation/RCU/stallwarn.txt13
-rw-r--r--Documentation/RCU/whatisRCU.txt3
-rw-r--r--Documentation/accounting/psi.txt73
-rw-r--r--Documentation/admin-guide/LSM/Yama.rst4
-rw-r--r--Documentation/admin-guide/README.rst3
-rw-r--r--Documentation/admin-guide/cgroup-v2.rst30
-rw-r--r--Documentation/admin-guide/ext4.rst574
-rw-r--r--Documentation/admin-guide/index.rst1
-rw-r--r--Documentation/admin-guide/kernel-parameters.txt74
-rw-r--r--Documentation/admin-guide/l1tf.rst2
-rw-r--r--Documentation/admin-guide/mm/index.rst1
-rw-r--r--Documentation/admin-guide/mm/memory-hotplug.rst (renamed from Documentation/memory-hotplug.txt)189
-rw-r--r--Documentation/admin-guide/pm/intel_pstate.rst7
-rw-r--r--Documentation/admin-guide/security-bugs.rst47
-rw-r--r--Documentation/arm/00-INDEX50
-rw-r--r--Documentation/arm/Samsung/Bootloader-interface.txt1
-rw-r--r--Documentation/arm64/elf_hwcaps.txt12
-rw-r--r--Documentation/arm64/hugetlbpage.txt38
-rw-r--r--Documentation/arm64/silicon-errata.txt1
-rw-r--r--Documentation/block/00-INDEX34
-rw-r--r--Documentation/blockdev/00-INDEX18
-rw-r--r--Documentation/blockdev/README.DAC960756
-rw-r--r--Documentation/blockdev/zram.txt2
-rw-r--r--Documentation/cdrom/00-INDEX11
-rw-r--r--Documentation/cgroup-v1/00-INDEX26
-rw-r--r--Documentation/cgroup-v1/rdma.txt2
-rw-r--r--Documentation/conf.py10
-rw-r--r--Documentation/core-api/boot-time-mm.rst71
-rw-r--r--Documentation/core-api/gfp_mask-from-fs-io.rst2
-rw-r--r--Documentation/core-api/idr.rst2
-rw-r--r--Documentation/core-api/index.rst4
-rw-r--r--Documentation/core-api/memory-allocation.rst122
-rw-r--r--Documentation/core-api/memory-hotplug.rst125
-rw-r--r--Documentation/core-api/mm-api.rst2
-rw-r--r--Documentation/core-api/printk-formats.rst11
-rw-r--r--Documentation/core-api/xarray.rst435
-rw-r--r--Documentation/crypto/asymmetric-keys.txt26
-rw-r--r--Documentation/dev-tools/coccinelle.rst23
-rw-r--r--Documentation/dev-tools/kselftest.rst2
-rw-r--r--Documentation/device-mapper/dm-flakey.txt4
-rw-r--r--Documentation/device-mapper/log-writes.txt2
-rw-r--r--Documentation/devicetree/00-INDEX12
-rw-r--r--Documentation/devicetree/bindings/arm/al,alpine.txt72
-rw-r--r--Documentation/devicetree/bindings/arm/amlogic.txt7
-rw-r--r--Documentation/devicetree/bindings/arm/atmel-at91.txt170
-rw-r--r--Documentation/devicetree/bindings/arm/atmel-sysregs.txt171
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt8
-rw-r--r--Documentation/devicetree/bindings/arm/coresight.txt120
-rw-r--r--Documentation/devicetree/bindings/arm/cpu-capacity.txt8
-rw-r--r--Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp34
-rw-r--r--Documentation/devicetree/bindings/arm/cpus.txt4
-rw-r--r--Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt19
-rw-r--r--Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt19
-rw-r--r--Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt183
-rw-r--r--Documentation/devicetree/bindings/arm/fsl.txt83
-rw-r--r--Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt8
-rw-r--r--Documentation/devicetree/bindings/arm/keystone/ti,sci.txt4
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt19
-rw-r--r--Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt44
-rw-r--r--Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt19
-rw-r--r--Documentation/devicetree/bindings/arm/rockchip.txt20
-rw-r--r--Documentation/devicetree/bindings/arm/scu.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/secure.txt19
-rw-r--r--Documentation/devicetree/bindings/arm/shmobile.txt16
-rw-r--r--Documentation/devicetree/bindings/arm/syna.txt (renamed from Documentation/devicetree/bindings/arm/marvell/marvell,berlin.txt)11
-rw-r--r--Documentation/devicetree/bindings/arm/tegra.txt9
-rw-r--r--Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt93
-rw-r--r--Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt103
-rw-r--r--Documentation/devicetree/bindings/arm/ux500/boards.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/zte,sysctrl.txt30
-rw-r--r--Documentation/devicetree/bindings/arm/zte.txt27
-rw-r--r--Documentation/devicetree/bindings/ata/ahci-platform.txt6
-rw-r--r--Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt1
-rw-r--r--Documentation/devicetree/bindings/clock/actions,owl-cmu.txt2
-rw-r--r--Documentation/devicetree/bindings/clock/at91-clock.txt516
-rw-r--r--Documentation/devicetree/bindings/clock/hi3670-clock.txt43
-rw-r--r--Documentation/devicetree/bindings/clock/imx6q-clock.txt8
-rw-r--r--Documentation/devicetree/bindings/clock/ingenic,cgu.txt7
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,camcc.txt18
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gcc.txt3
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,hfpll.txt60
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,krait-cc.txt34
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt17
-rw-r--r--Documentation/devicetree/bindings/connector/usb-connector.txt8
-rw-r--r--Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt2
-rw-r--r--Documentation/devicetree/bindings/csky/cpus.txt73
-rw-r--r--Documentation/devicetree/bindings/dma/jz4780-dma.txt14
-rw-r--r--Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt1
-rw-r--r--Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt1
-rw-r--r--Documentation/devicetree/bindings/firmware/qcom,scm.txt33
-rw-r--r--Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt82
-rw-r--r--Documentation/devicetree/bindings/fpga/fpga-region.txt4
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio.txt142
-rw-r--r--Documentation/devicetree/bindings/gpio/ingenic,gpio.txt46
-rw-r--r--Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt65
-rw-r--r--Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt21
-rw-r--r--Documentation/devicetree/bindings/hwmon/ina3221.txt44
-rw-r--r--Documentation/devicetree/bindings/hwmon/ltc2978.txt2
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-designware.txt7
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt1
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-rcar.txt2
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt1
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c.txt2
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adxl372.txt33
-rw-r--r--Documentation/devicetree/bindings/iio/adc/mcp3911.txt30
-rw-r--r--Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt81
-rw-r--r--Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt4
-rw-r--r--Documentation/devicetree/bindings/iio/dac/ad5758.txt5
-rw-r--r--Documentation/devicetree/bindings/iio/dac/ltc1660.txt21
-rw-r--r--Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt1
-rw-r--r--Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt1
-rw-r--r--Documentation/devicetree/bindings/iio/light/bh1750.txt18
-rw-r--r--Documentation/devicetree/bindings/iio/light/tsl2772.txt42
-rw-r--r--Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt12
-rw-r--r--Documentation/devicetree/bindings/input/pwm-vibrator.txt4
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt6
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt62
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt40
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt85
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt36
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt5
-rw-r--r--Documentation/devicetree/bindings/iommu/mediatek,iommu.txt4
-rw-r--r--Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt1
-rw-r--r--Documentation/devicetree/bindings/leds/leds-an30259a.txt43
-rw-r--r--Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt1
-rw-r--r--Documentation/devicetree/bindings/media/cedrus.txt54
-rw-r--r--Documentation/devicetree/bindings/media/fsl-pxp.txt26
-rw-r--r--Documentation/devicetree/bindings/media/i2c/adv748x.txt20
-rw-r--r--Documentation/devicetree/bindings/media/i2c/adv7604.txt2
-rw-r--r--Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt (renamed from Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807.txt)0
-rw-r--r--Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt1
-rw-r--r--Documentation/devicetree/bindings/media/rcar_vin.txt1
-rw-r--r--Documentation/devicetree/bindings/media/renesas,ceu.txt14
-rw-r--r--Documentation/devicetree/bindings/media/rockchip-vpu.txt29
-rw-r--r--Documentation/devicetree/bindings/media/video-interfaces.txt4
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt1
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt3
-rw-r--r--Documentation/devicetree/bindings/mfd/arizona.txt2
-rw-r--r--Documentation/devicetree/bindings/mfd/atmel-usart.txt (renamed from Documentation/devicetree/bindings/serial/atmel-usart.txt)25
-rw-r--r--Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt17
-rw-r--r--Documentation/devicetree/bindings/mips/mscc.txt16
-rw-r--r--Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt39
-rw-r--r--Documentation/devicetree/bindings/misc/lwn-bk4.txt26
-rw-r--r--Documentation/devicetree/bindings/mmc/arasan,sdhci.txt1
-rw-r--r--Documentation/devicetree/bindings/mmc/jz4740.txt1
-rw-r--r--Documentation/devicetree/bindings/mmc/mmci.txt11
-rw-r--r--Documentation/devicetree/bindings/mmc/mtk-sd.txt2
-rw-r--r--Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt72
-rw-r--r--Documentation/devicetree/bindings/mmc/renesas,mmcif.txt4
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-sprd.txt41
-rw-r--r--Documentation/devicetree/bindings/mmc/tmio_mmc.txt10
-rw-r--r--Documentation/devicetree/bindings/mmc/uniphier-sd.txt55
-rw-r--r--Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt3
-rw-r--r--Documentation/devicetree/bindings/net/can/rcar_can.txt1
-rw-r--r--Documentation/devicetree/bindings/net/dsa/b53.txt36
-rw-r--r--Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt143
-rw-r--r--Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt21
-rw-r--r--Documentation/devicetree/bindings/net/marvell,prestera.txt4
-rw-r--r--Documentation/devicetree/bindings/net/marvell-pp2.txt45
-rw-r--r--Documentation/devicetree/bindings/net/micrel-ksz90x1.txt28
-rw-r--r--Documentation/devicetree/bindings/net/mscc-ocelot.txt9
-rw-r--r--Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt21
-rw-r--r--Documentation/devicetree/bindings/net/renesas,ravb.txt1
-rw-r--r--Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt6
-rw-r--r--Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt1
-rw-r--r--Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt1
-rw-r--r--Documentation/devicetree/bindings/pci/pci-keystone.txt3
-rw-r--r--Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt1
-rw-r--r--Documentation/devicetree/bindings/pci/rcar-pci.txt2
-rw-r--r--Documentation/devicetree/bindings/pci/ti-pci.txt5
-rw-r--r--Documentation/devicetree/bindings/phy/brcm-sata-phy.txt1
-rw-r--r--Documentation/devicetree/bindings/phy/phy-cadence-dp.txt30
-rw-r--r--Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt43
-rw-r--r--Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt43
-rw-r--r--Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt23
-rw-r--r--Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt1
-rw-r--r--Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt11
-rw-r--r--Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt10
-rw-r--r--Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt31
-rw-r--r--Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt45
-rw-r--r--Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt69
-rw-r--r--Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt57
-rw-r--r--Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt57
-rw-r--r--Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt39
-rw-r--r--Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt2
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt216
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt2
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt199
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt191
-rw-r--r--Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt3
-rw-r--r--Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt153
-rw-r--r--Documentation/devicetree/bindings/power/actions,owl-sps.txt2
-rw-r--r--Documentation/devicetree/bindings/power/renesas,apmu.txt2
-rw-r--r--Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt3
-rw-r--r--Documentation/devicetree/bindings/power/reset/qcom,pon.txt5
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq25890.txt3
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq27xxx.txt1
-rw-r--r--Documentation/devicetree/bindings/power/supply/sc2731_charger.txt40
-rw-r--r--Documentation/devicetree/bindings/regulator/pfuze100.txt5
-rw-r--r--Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt23
-rw-r--r--Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt12
-rw-r--r--Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt68
-rw-r--r--Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt126
-rw-r--r--Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt5
-rw-r--r--Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt8
-rw-r--r--Documentation/devicetree/bindings/reset/fsl,imx7-src.txt2
-rw-r--r--Documentation/devicetree/bindings/reset/qcom,pdc-global.txt52
-rw-r--r--Documentation/devicetree/bindings/reset/renesas,rst.txt3
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,sci-serial.txt6
-rw-r--r--Documentation/devicetree/bindings/serial/uniphier-uart.txt3
-rw-r--r--Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.txt29
-rw-r--r--Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt6
-rw-r--r--Documentation/devicetree/bindings/soc/mediatek/pwrap.txt2
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt29
-rw-r--r--Documentation/devicetree/bindings/soc/rockchip/grf.txt2
-rw-r--r--Documentation/devicetree/bindings/sound/adi,adau1977.txt54
-rw-r--r--Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt24
-rw-r--r--Documentation/devicetree/bindings/sound/cs42l51.txt17
-rw-r--r--Documentation/devicetree/bindings/sound/maxim,max98088.txt23
-rw-r--r--Documentation/devicetree/bindings/sound/mikroe,mikroe-proto.txt23
-rw-r--r--Documentation/devicetree/bindings/sound/nau8822.txt16
-rw-r--r--Documentation/devicetree/bindings/sound/pcm3060.txt17
-rw-r--r--Documentation/devicetree/bindings/sound/qcom,q6afe.txt18
-rw-r--r--Documentation/devicetree/bindings/sound/renesas,rsnd.txt5
-rw-r--r--Documentation/devicetree/bindings/sound/st,sta32x.txt9
-rw-r--r--Documentation/devicetree/bindings/sound/st,stm32-sai.txt7
-rw-r--r--Documentation/devicetree/bindings/sound/sun4i-i2s.txt2
-rw-r--r--Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt12
-rw-r--r--Documentation/devicetree/bindings/sound/ts3a227e.txt2
-rw-r--r--Documentation/devicetree/bindings/sound/wm8782.txt17
-rw-r--r--Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt39
-rw-r--r--Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt36
-rw-r--r--Documentation/devicetree/bindings/spi/sh-msiof.txt8
-rw-r--r--Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt2
-rw-r--r--Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt1
-rw-r--r--Documentation/devicetree/bindings/spi/spi-pxa2xx.txt24
-rw-r--r--Documentation/devicetree/bindings/spi/spi-rspi.txt4
-rw-r--r--Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt32
-rw-r--r--Documentation/devicetree/bindings/spi/spi-sprd.txt26
-rw-r--r--Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt44
-rw-r--r--Documentation/devicetree/bindings/sram/sunxi-sram.txt4
-rw-r--r--Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt16
-rw-r--r--Documentation/devicetree/bindings/thermal/qoriq-thermal.txt6
-rw-r--r--Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt5
-rw-r--r--Documentation/devicetree/bindings/thermal/rcar-thermal.txt6
-rw-r--r--Documentation/devicetree/bindings/thermal/stm32-thermal.txt61
-rw-r--r--Documentation/devicetree/bindings/thermal/thermal.txt2
-rw-r--r--Documentation/devicetree/bindings/timer/renesas,cmt.txt9
-rw-r--r--Documentation/devicetree/bindings/timer/renesas,ostm.txt3
-rw-r--r--Documentation/devicetree/bindings/timer/renesas,tmu.txt2
-rw-r--r--Documentation/devicetree/bindings/trivial-devices.txt11
-rw-r--r--Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/dwc2.txt1
-rw-r--r--Documentation/devicetree/bindings/usb/dwc3.txt1
-rw-r--r--Documentation/devicetree/bindings/usb/ehci-mv.txt23
-rw-r--r--Documentation/devicetree/bindings/usb/exynos-usb.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/faraday,fotg210.txt35
-rw-r--r--Documentation/devicetree/bindings/usb/fcs,fusb302.txt32
-rw-r--r--Documentation/devicetree/bindings/usb/renesas_usb3.txt6
-rw-r--r--Documentation/devicetree/bindings/usb/renesas_usbhs.txt11
-rw-r--r--Documentation/devicetree/bindings/usb/usb-ehci.txt6
-rw-r--r--Documentation/devicetree/bindings/usb/usb-ohci.txt6
-rw-r--r--Documentation/devicetree/bindings/usb/usb-xhci.txt5
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt6
-rw-r--r--Documentation/devicetree/bindings/watchdog/armada-37xx-wdt.txt23
-rw-r--r--Documentation/devicetree/bindings/watchdog/mpc8xxx-wdt.txt25
-rw-r--r--Documentation/devicetree/bindings/watchdog/renesas-wdt.txt2
-rw-r--r--Documentation/driver-api/basics.rst3
-rw-r--r--Documentation/driver-api/firewire.rst48
-rw-r--r--Documentation/driver-api/fpga/fpga-bridge.rst37
-rw-r--r--Documentation/driver-api/fpga/fpga-mgr.rst121
-rw-r--r--Documentation/driver-api/fpga/fpga-programming.rst107
-rw-r--r--Documentation/driver-api/fpga/fpga-region.rst91
-rw-r--r--Documentation/driver-api/fpga/index.rst2
-rw-r--r--Documentation/driver-api/fpga/intro.rst2
-rw-r--r--Documentation/driver-api/gpio/board.rst24
-rw-r--r--Documentation/driver-api/gpio/consumer.rst64
-rw-r--r--Documentation/driver-api/gpio/driver.rst23
-rw-r--r--Documentation/driver-api/gpio/index.rst2
-rw-r--r--Documentation/driver-api/index.rst3
-rw-r--r--Documentation/driver-api/mtdnand.rst34
-rw-r--r--Documentation/driver-api/pci/index.rst22
-rw-r--r--Documentation/driver-api/pci/p2pdma.rst145
-rw-r--r--Documentation/driver-api/pci/pci.rst (renamed from Documentation/driver-api/pci.rst)0
-rw-r--r--Documentation/driver-api/soundwire/stream.rst36
-rw-r--r--Documentation/driver-api/uio-howto.rst4
-rw-r--r--Documentation/efi-stub.txt17
-rw-r--r--Documentation/fb/00-INDEX75
-rw-r--r--Documentation/fb/uvesafb.txt5
-rw-r--r--Documentation/fb/vesafb.txt4
-rw-r--r--Documentation/filesystems/00-INDEX153
-rw-r--r--Documentation/filesystems/ceph.txt5
-rw-r--r--Documentation/filesystems/dax.txt2
-rw-r--r--Documentation/filesystems/ext2.txt2
-rw-r--r--Documentation/filesystems/ext4/about.rst (renamed from Documentation/filesystems/ext4/ondisk/about.rst)0
-rw-r--r--Documentation/filesystems/ext4/allocators.rst (renamed from Documentation/filesystems/ext4/ondisk/allocators.rst)0
-rw-r--r--Documentation/filesystems/ext4/attributes.rst (renamed from Documentation/filesystems/ext4/ondisk/attributes.rst)8
-rw-r--r--Documentation/filesystems/ext4/bigalloc.rst (renamed from Documentation/filesystems/ext4/ondisk/bigalloc.rst)0
-rw-r--r--Documentation/filesystems/ext4/bitmaps.rst (renamed from Documentation/filesystems/ext4/ondisk/bitmaps.rst)0
-rw-r--r--Documentation/filesystems/ext4/blockgroup.rst (renamed from Documentation/filesystems/ext4/ondisk/blockgroup.rst)0
-rw-r--r--Documentation/filesystems/ext4/blockmap.rst (renamed from Documentation/filesystems/ext4/ondisk/blockmap.rst)0
-rw-r--r--Documentation/filesystems/ext4/blocks.rst (renamed from Documentation/filesystems/ext4/ondisk/blocks.rst)0
-rw-r--r--Documentation/filesystems/ext4/checksums.rst (renamed from Documentation/filesystems/ext4/ondisk/checksums.rst)2
-rw-r--r--Documentation/filesystems/ext4/directory.rst (renamed from Documentation/filesystems/ext4/ondisk/directory.rst)18
-rw-r--r--Documentation/filesystems/ext4/dynamic.rst (renamed from Documentation/filesystems/ext4/ondisk/dynamic.rst)0
-rw-r--r--Documentation/filesystems/ext4/eainode.rst (renamed from Documentation/filesystems/ext4/ondisk/eainode.rst)0
-rw-r--r--Documentation/filesystems/ext4/ext4.rst613
-rw-r--r--Documentation/filesystems/ext4/globals.rst (renamed from Documentation/filesystems/ext4/ondisk/globals.rst)0
-rw-r--r--Documentation/filesystems/ext4/group_descr.rst (renamed from Documentation/filesystems/ext4/ondisk/group_descr.rst)4
-rw-r--r--Documentation/filesystems/ext4/ifork.rst (renamed from Documentation/filesystems/ext4/ondisk/ifork.rst)8
-rw-r--r--Documentation/filesystems/ext4/index.rst19
-rw-r--r--Documentation/filesystems/ext4/inlinedata.rst (renamed from Documentation/filesystems/ext4/ondisk/inlinedata.rst)0
-rw-r--r--Documentation/filesystems/ext4/inodes.rst (renamed from Documentation/filesystems/ext4/ondisk/inodes.rst)19
-rw-r--r--Documentation/filesystems/ext4/journal.rst (renamed from Documentation/filesystems/ext4/ondisk/journal.rst)32
-rw-r--r--Documentation/filesystems/ext4/mmp.rst (renamed from Documentation/filesystems/ext4/ondisk/mmp.rst)2
-rw-r--r--Documentation/filesystems/ext4/ondisk/index.rst9
-rw-r--r--Documentation/filesystems/ext4/overview.rst (renamed from Documentation/filesystems/ext4/ondisk/overview.rst)0
-rw-r--r--Documentation/filesystems/ext4/special_inodes.rst (renamed from Documentation/filesystems/ext4/ondisk/special_inodes.rst)2
-rw-r--r--Documentation/filesystems/ext4/super.rst (renamed from Documentation/filesystems/ext4/ondisk/super.rst)24
-rw-r--r--Documentation/filesystems/f2fs.txt8
-rw-r--r--Documentation/filesystems/fscrypt.rst10
-rw-r--r--Documentation/filesystems/nfs/00-INDEX26
-rw-r--r--Documentation/filesystems/nfs/rpc-cache.txt6
-rw-r--r--Documentation/filesystems/overlayfs.txt6
-rw-r--r--Documentation/filesystems/pohmelfs/design_notes.txt72
-rw-r--r--Documentation/filesystems/pohmelfs/info.txt99
-rw-r--r--Documentation/filesystems/pohmelfs/network_protocol.txt227
-rw-r--r--Documentation/filesystems/porting16
-rw-r--r--Documentation/filesystems/proc.txt4
-rw-r--r--Documentation/filesystems/vfs.txt22
-rw-r--r--Documentation/fmc/00-INDEX38
-rw-r--r--Documentation/gpio/00-INDEX4
-rw-r--r--Documentation/hwmon/ina32212
-rw-r--r--Documentation/hwmon/lm756
-rw-r--r--Documentation/hwmon/ltc29785
-rw-r--r--Documentation/hwmon/mc13783-adc8
-rw-r--r--Documentation/ide/00-INDEX14
-rw-r--r--Documentation/index.rst5
-rw-r--r--Documentation/input/event-codes.rst11
-rw-r--r--Documentation/ioctl/00-INDEX12
-rw-r--r--Documentation/ioctl/ioctl-number.txt2
-rw-r--r--Documentation/isdn/00-INDEX42
-rw-r--r--Documentation/kbuild/00-INDEX14
-rw-r--r--Documentation/kernel-per-CPU-kthreads.txt2
-rw-r--r--Documentation/laptops/00-INDEX16
-rw-r--r--Documentation/laptops/lg-laptop.rst81
-rw-r--r--Documentation/leds/00-INDEX32
-rw-r--r--Documentation/locking/00-INDEX16
-rw-r--r--Documentation/locking/lockstat.txt2
-rw-r--r--Documentation/m68k/00-INDEX7
-rw-r--r--Documentation/media/kapi/cec-core.rst4
-rw-r--r--Documentation/media/kapi/mc-core.rst2
-rw-r--r--Documentation/media/kapi/v4l2-subdev.rst30
-rw-r--r--Documentation/media/uapi/cec/cec-func-poll.rst3
-rw-r--r--Documentation/media/uapi/cec/cec-ioc-receive.rst25
-rw-r--r--Documentation/media/uapi/mediactl/media-controller.rst1
-rw-r--r--Documentation/media/uapi/mediactl/media-funcs.rst6
-rw-r--r--Documentation/media/uapi/mediactl/media-ioc-device-info.rst1
-rw-r--r--Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst1
-rw-r--r--Documentation/media/uapi/mediactl/media-ioc-enum-links.rst1
-rw-r--r--Documentation/media/uapi/mediactl/media-ioc-g-topology.rst1
-rw-r--r--Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst66
-rw-r--r--Documentation/media/uapi/mediactl/media-ioc-setup-link.rst1
-rw-r--r--Documentation/media/uapi/mediactl/media-request-ioc-queue.rst78
-rw-r--r--Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst51
-rw-r--r--Documentation/media/uapi/mediactl/request-api.rst252
-rw-r--r--Documentation/media/uapi/mediactl/request-func-close.rst49
-rw-r--r--Documentation/media/uapi/mediactl/request-func-ioctl.rst67
-rw-r--r--Documentation/media/uapi/mediactl/request-func-poll.rst77
-rw-r--r--Documentation/media/uapi/v4l/biblio.rst10
-rw-r--r--Documentation/media/uapi/v4l/buffer.rst29
-rw-r--r--Documentation/media/uapi/v4l/colorspaces-defs.rst8
-rw-r--r--Documentation/media/uapi/v4l/colorspaces-details.rst13
-rw-r--r--Documentation/media/uapi/v4l/extended-controls.rst176
-rw-r--r--Documentation/media/uapi/v4l/func-poll.rst3
-rw-r--r--Documentation/media/uapi/v4l/meta-formats.rst1
-rw-r--r--Documentation/media/uapi/v4l/pixfmt-compressed.rst18
-rw-r--r--Documentation/media/uapi/v4l/pixfmt-meta-d4xx.rst210
-rw-r--r--Documentation/media/uapi/v4l/pixfmt-reserved.rst15
-rw-r--r--Documentation/media/uapi/v4l/vidioc-create-bufs.rst14
-rw-r--r--Documentation/media/uapi/v4l/vidioc-cropcap.rst2
-rw-r--r--Documentation/media/uapi/v4l/vidioc-dqevent.rst12
-rw-r--r--Documentation/media/uapi/v4l/vidioc-g-crop.rst2
-rw-r--r--Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst27
-rw-r--r--Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst59
-rw-r--r--Documentation/media/uapi/v4l/vidioc-qbuf.rst37
-rw-r--r--Documentation/media/uapi/v4l/vidioc-queryctrl.rst14
-rw-r--r--Documentation/media/uapi/v4l/vidioc-reqbufs.rst42
-rw-r--r--Documentation/media/videodev2.h.rst.exceptions10
-rw-r--r--Documentation/memory-barriers.txt3
-rw-r--r--Documentation/mips/00-INDEX4
-rw-r--r--Documentation/mmc/00-INDEX10
-rw-r--r--Documentation/mtd/nand/pxa3xx-nand.txt113
-rw-r--r--Documentation/netlabel/00-INDEX10
-rw-r--r--Documentation/netlabel/cipso_ipv4.txt11
-rw-r--r--Documentation/netlabel/introduction.txt2
-rw-r--r--Documentation/networking/00-INDEX234
-rw-r--r--Documentation/networking/af_xdp.rst4
-rw-r--r--Documentation/networking/defza.txt57
-rw-r--r--Documentation/networking/devlink-params-bnxt.txt18
-rw-r--r--Documentation/networking/devlink-params.txt42
-rw-r--r--Documentation/networking/dpaa2/ethernet-driver.rst185
-rw-r--r--Documentation/networking/dpaa2/index.rst1
-rw-r--r--Documentation/networking/e100.rst3
-rw-r--r--Documentation/networking/e1000.rst3
-rw-r--r--Documentation/networking/e1000e.rst382
-rw-r--r--Documentation/networking/e1000e.txt312
-rw-r--r--Documentation/networking/filter.txt94
-rw-r--r--Documentation/networking/fm10k.rst141
-rw-r--r--Documentation/networking/i40e.rst770
-rw-r--r--Documentation/networking/i40e.txt190
-rw-r--r--Documentation/networking/i40evf.txt54
-rw-r--r--Documentation/networking/iavf.rst281
-rw-r--r--Documentation/networking/ice.rst45
-rw-r--r--Documentation/networking/ice.txt39
-rw-r--r--Documentation/networking/igb.rst193
-rw-r--r--Documentation/networking/igb.txt129
-rw-r--r--Documentation/networking/igbvf.rst64
-rw-r--r--Documentation/networking/igbvf.txt80
-rw-r--r--Documentation/networking/index.rst10
-rw-r--r--Documentation/networking/ip-sysctl.txt21
-rw-r--r--Documentation/networking/ixgb.rst467
-rw-r--r--Documentation/networking/ixgb.txt433
-rw-r--r--Documentation/networking/ixgbe.rst527
-rw-r--r--Documentation/networking/ixgbe.txt349
-rw-r--r--Documentation/networking/ixgbevf.rst66
-rw-r--r--Documentation/networking/ixgbevf.txt52
-rw-r--r--Documentation/networking/netvsc.txt9
-rw-r--r--Documentation/networking/rxrpc.txt25
-rw-r--r--Documentation/networking/tcp.txt101
-rw-r--r--Documentation/networking/xfrm_device.txt4
-rw-r--r--Documentation/nvmem/nvmem.txt31
-rw-r--r--Documentation/parisc/00-INDEX6
-rw-r--r--Documentation/power/00-INDEX44
-rw-r--r--Documentation/power/swsusp.txt2
-rw-r--r--Documentation/powerpc/00-INDEX34
-rw-r--r--Documentation/preempt-locking.txt12
-rw-r--r--Documentation/process/2.Process.rst2
-rw-r--r--Documentation/process/adding-syscalls.rst2
-rw-r--r--Documentation/process/code-of-conduct-interpretation.rst156
-rw-r--r--Documentation/process/code-of-conduct.rst25
-rw-r--r--Documentation/process/deprecated.rst119
-rw-r--r--Documentation/process/howto.rst13
-rw-r--r--Documentation/process/index.rst4
-rw-r--r--Documentation/process/license-rules.rst2
-rw-r--r--Documentation/process/programming-language.rst45
-rw-r--r--Documentation/s390/00-INDEX28
-rw-r--r--Documentation/s390/vfio-ap.txt837
-rw-r--r--Documentation/scheduler/00-INDEX18
-rw-r--r--Documentation/scheduler/completion.txt262
-rw-r--r--Documentation/scsi/00-INDEX108
-rw-r--r--Documentation/scsi/ufs.txt20
-rw-r--r--Documentation/security/LSM.rst2
-rw-r--r--Documentation/security/keys/core.rst217
-rw-r--r--Documentation/security/keys/ecryptfs.rst8
-rw-r--r--Documentation/security/self-protection.rst10
-rw-r--r--Documentation/serial/00-INDEX16
-rw-r--r--Documentation/serial/driver2
-rw-r--r--Documentation/serial/serial-iso7816.txt83
-rw-r--r--Documentation/sound/hd-audio/models.rst2
-rw-r--r--Documentation/sound/kernel-api/writing-an-alsa-driver.rst307
-rw-r--r--Documentation/sphinx-static/theme_overrides.css38
-rw-r--r--Documentation/spi/00-INDEX16
-rw-r--r--Documentation/switchtec.txt30
-rw-r--r--Documentation/sysctl/00-INDEX16
-rw-r--r--Documentation/sysctl/kernel.txt18
-rw-r--r--Documentation/sysctl/net.txt8
-rw-r--r--Documentation/timers/00-INDEX16
-rw-r--r--Documentation/trace/ftrace.rst3
-rw-r--r--Documentation/trace/histogram.rst6
-rw-r--r--Documentation/trace/kprobetrace.rst23
-rw-r--r--Documentation/trace/stm.rst38
-rw-r--r--Documentation/trace/sys-t.rst62
-rw-r--r--Documentation/virtual/00-INDEX11
-rw-r--r--Documentation/virtual/kvm/00-INDEX35
-rw-r--r--Documentation/virtual/kvm/api.txt135
-rw-r--r--Documentation/vm/00-INDEX50
-rw-r--r--Documentation/vm/hmm.rst14
-rw-r--r--Documentation/vm/slub.rst12
-rw-r--r--Documentation/w1/00-INDEX10
-rw-r--r--Documentation/w1/masters/00-INDEX12
-rw-r--r--Documentation/w1/slaves/00-INDEX14
-rw-r--r--Documentation/watchdog/hpwdt.txt93
-rw-r--r--Documentation/watchdog/watchdog-parameters.txt5
-rw-r--r--Documentation/x86/00-INDEX20
-rw-r--r--Documentation/x86/boot.txt32
-rw-r--r--Documentation/x86/intel_rdt_ui.txt22
-rw-r--r--Documentation/x86/pat.txt4
-rw-r--r--Documentation/x86/x86_64/00-INDEX16
-rw-r--r--Documentation/x86/x86_64/mm.txt174
-rw-r--r--Documentation/xilinx/eemi.txt67
526 files changed, 15209 insertions, 8155 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
deleted file mode 100644
index 2754fe83f0d4..000000000000
--- a/Documentation/00-INDEX
+++ /dev/null
@@ -1,428 +0,0 @@
-
-This is a brief list of all the files in ./linux/Documentation and what
-they contain. If you add a documentation file, please list it here in
-alphabetical order as well, or risk being hunted down like a rabid dog.
-Please keep the descriptions small enough to fit on one line.
- Thanks -- Paul G.
-
-Following translations are available on the WWW:
-
- - Japanese, maintained by the JF Project (jf@listserv.linux.or.jp), at
- http://linuxjf.sourceforge.jp/
-
-00-INDEX
- - this file.
-ABI/
- - info on kernel <-> userspace ABI and relative interface stability.
-CodingStyle
- - nothing here, just a pointer to process/coding-style.rst.
-DMA-API.txt
- - DMA API, pci_ API & extensions for non-consistent memory machines.
-DMA-API-HOWTO.txt
- - Dynamic DMA mapping Guide
-DMA-ISA-LPC.txt
- - How to do DMA with ISA (and LPC) devices.
-DMA-attributes.txt
- - listing of the various possible attributes a DMA region can have
-EDID/
- - directory with info on customizing EDID for broken gfx/displays.
-IPMI.txt
- - info on Linux Intelligent Platform Management Interface (IPMI) Driver.
-IRQ-affinity.txt
- - how to select which CPU(s) handle which interrupt events on SMP.
-IRQ-domain.txt
- - info on interrupt numbering and setting up IRQ domains.
-IRQ.txt
- - description of what an IRQ is.
-Intel-IOMMU.txt
- - basic info on the Intel IOMMU virtualization support.
-Makefile
- - It's not of interest for those who aren't touching the build system.
-PCI/
- - info related to PCI drivers.
-RCU/
- - directory with info on RCU (read-copy update).
-SAK.txt
- - info on Secure Attention Keys.
-SM501.txt
- - Silicon Motion SM501 multimedia companion chip
-SubmittingPatches
- - nothing here, just a pointer to process/coding-style.rst.
-accounting/
- - documentation on accounting and taskstats.
-acpi/
- - info on ACPI-specific hooks in the kernel.
-admin-guide/
- - info related to Linux users and system admins.
-aoe/
- - description of AoE (ATA over Ethernet) along with config examples.
-arm/
- - directory with info about Linux on the ARM architecture.
-arm64/
- - directory with info about Linux on the 64 bit ARM architecture.
-auxdisplay/
- - misc. LCD driver documentation (cfag12864b, ks0108).
-backlight/
- - directory with info on controlling backlights in flat panel displays
-block/
- - info on the Block I/O (BIO) layer.
-blockdev/
- - info on block devices & drivers
-bt8xxgpio.txt
- - info on how to modify a bt8xx video card for GPIO usage.
-btmrvl.txt
- - info on Marvell Bluetooth driver usage.
-bus-devices/
- - directory with info on TI GPMC (General Purpose Memory Controller)
-bus-virt-phys-mapping.txt
- - how to access I/O mapped memory from within device drivers.
-cdrom/
- - directory with information on the CD-ROM drivers that Linux has.
-cgroup-v1/
- - cgroups v1 features, including cpusets and memory controller.
-cma/
- - Continuous Memory Area (CMA) debugfs interface.
-conf.py
- - It's not of interest for those who aren't touching the build system.
-connector/
- - docs on the netlink based userspace<->kernel space communication mod.
-console/
- - documentation on Linux console drivers.
-core-api/
- - documentation on kernel core components.
-cpu-freq/
- - info on CPU frequency and voltage scaling.
-cpu-hotplug.txt
- - document describing CPU hotplug support in the Linux kernel.
-cpu-load.txt
- - document describing how CPU load statistics are collected.
-cpuidle/
- - info on CPU_IDLE, CPU idle state management subsystem.
-cputopology.txt
- - documentation on how CPU topology info is exported via sysfs.
-crc32.txt
- - brief tutorial on CRC computation
-crypto/
- - directory with info on the Crypto API.
-dcdbas.txt
- - information on the Dell Systems Management Base Driver.
-debugging-modules.txt
- - some notes on debugging modules after Linux 2.6.3.
-debugging-via-ohci1394.txt
- - how to use firewire like a hardware debugger memory reader.
-dell_rbu.txt
- - document demonstrating the use of the Dell Remote BIOS Update driver.
-dev-tools/
- - directory with info on development tools for the kernel.
-device-mapper/
- - directory with info on Device Mapper.
-dmaengine/
- - the DMA engine and controller API guides.
-devicetree/
- - directory with info on device tree files used by OF/PowerPC/ARM
-digsig.txt
- -info on the Digital Signature Verification API
-dma-buf-sharing.txt
- - the DMA Buffer Sharing API Guide
-docutils.conf
- - nothing here. Just a configuration file for docutils.
-dontdiff
- - file containing a list of files that should never be diff'ed.
-driver-api/
- - the Linux driver implementer's API guide.
-driver-model/
- - directory with info about Linux driver model.
-early-userspace/
- - info about initramfs, klibc, and userspace early during boot.
-efi-stub.txt
- - How to use the EFI boot stub to bypass GRUB or elilo on EFI systems.
-eisa.txt
- - info on EISA bus support.
-extcon/
- - directory with porting guide for Android kernel switch driver.
-isa.txt
- - info on EISA bus support.
-fault-injection/
- - dir with docs about the fault injection capabilities infrastructure.
-fb/
- - directory with info on the frame buffer graphics abstraction layer.
-features/
- - status of feature implementation on different architectures.
-filesystems/
- - info on the vfs and the various filesystems that Linux supports.
-firmware_class/
- - request_firmware() hotplug interface info.
-flexible-arrays.txt
- - how to make use of flexible sized arrays in linux
-fmc/
- - information about the FMC bus abstraction
-fpga/
- - FPGA Manager Core.
-futex-requeue-pi.txt
- - info on requeueing of tasks from a non-PI futex to a PI futex
-gcc-plugins.txt
- - GCC plugin infrastructure.
-gpio/
- - gpio related documentation
-gpu/
- - directory with information on GPU driver developer's guide.
-hid/
- - directory with information on human interface devices
-highuid.txt
- - notes on the change from 16 bit to 32 bit user/group IDs.
-hwspinlock.txt
- - hardware spinlock provides hardware assistance for synchronization
-timers/
- - info on the timer related topics
-hw_random.txt
- - info on Linux support for random number generator in i8xx chipsets.
-hwmon/
- - directory with docs on various hardware monitoring drivers.
-i2c/
- - directory with info about the I2C bus/protocol (2 wire, kHz speed).
-x86/i386/
- - directory with info about Linux on Intel 32 bit architecture.
-ia64/
- - directory with info about Linux on Intel 64 bit architecture.
-ide/
- - Information regarding the Enhanced IDE drive.
-iio/
- - info on industrial IIO configfs support.
-index.rst
- - main index for the documentation at ReST format.
-infiniband/
- - directory with documents concerning Linux InfiniBand support.
-input/
- - info on Linux input device support.
-intel_txt.txt
- - info on intel Trusted Execution Technology (intel TXT).
-io-mapping.txt
- - description of io_mapping functions in linux/io-mapping.h
-io_ordering.txt
- - info on ordering I/O writes to memory-mapped addresses.
-ioctl/
- - directory with documents describing various IOCTL calls.
-iostats.txt
- - info on I/O statistics Linux kernel provides.
-irqflags-tracing.txt
- - how to use the irq-flags tracing feature.
-isapnp.txt
- - info on Linux ISA Plug & Play support.
-isdn/
- - directory with info on the Linux ISDN support, and supported cards.
-kbuild/
- - directory with info about the kernel build process.
-kdump/
- - directory with mini HowTo on getting the crash dump code to work.
-doc-guide/
- - how to write and format reStructuredText kernel documentation
-kernel-per-CPU-kthreads.txt
- - List of all per-CPU kthreads and how they introduce jitter.
-kobject.txt
- - info of the kobject infrastructure of the Linux kernel.
-kprobes.txt
- - documents the kernel probes debugging feature.
-kref.txt
- - docs on adding reference counters (krefs) to kernel objects.
-laptops/
- - directory with laptop related info and laptop driver documentation.
-ldm.txt
- - a brief description of LDM (Windows Dynamic Disks).
-leds/
- - directory with info about LED handling under Linux.
-livepatch/
- - info on kernel live patching.
-locking/
- - directory with info about kernel locking primitives
-lockup-watchdogs.txt
- - info on soft and hard lockup detectors (aka nmi_watchdog).
-logo.gif
- - full colour GIF image of Linux logo (penguin - Tux).
-logo.txt
- - info on creator of above logo & site to get additional images from.
-lsm.txt
- - Linux Security Modules: General Security Hooks for Linux
-lzo.txt
- - kernel LZO decompressor input formats
-m68k/
- - directory with info about Linux on Motorola 68k architecture.
-mailbox.txt
- - How to write drivers for the common mailbox framework (IPC).
-md/
- - directory with info about Linux Software RAID
-media/
- - info on media drivers: uAPI, kAPI and driver documentation.
-memory-barriers.txt
- - info on Linux kernel memory barriers.
-memory-devices/
- - directory with info on parts like the Texas Instruments EMIF driver
-memory-hotplug.txt
- - Hotpluggable memory support, how to use and current status.
-men-chameleon-bus.txt
- - info on MEN chameleon bus.
-mic/
- - Intel Many Integrated Core (MIC) architecture device driver.
-mips/
- - directory with info about Linux on MIPS architecture.
-misc-devices/
- - directory with info about devices using the misc dev subsystem
-mmc/
- - directory with info about the MMC subsystem
-mtd/
- - directory with info about memory technology devices (flash)
-namespaces/
- - directory with various information about namespaces
-netlabel/
- - directory with information on the NetLabel subsystem.
-networking/
- - directory with info on various aspects of networking with Linux.
-nfc/
- - directory relating info about Near Field Communications support.
-nios2/
- - Linux on the Nios II architecture.
-nommu-mmap.txt
- - documentation about no-mmu memory mapping support.
-numastat.txt
- - info on how to read Numa policy hit/miss statistics in sysfs.
-ntb.txt
- - info on Non-Transparent Bridge (NTB) drivers.
-nvdimm/
- - info on non-volatile devices.
-nvmem/
- - info on non volatile memory framework.
-output/
- - default directory where html/LaTeX/pdf files will be written.
-padata.txt
- - An introduction to the "padata" parallel execution API
-parisc/
- - directory with info on using Linux on PA-RISC architecture.
-parport-lowlevel.txt
- - description and usage of the low level parallel port functions.
-pcmcia/
- - info on the Linux PCMCIA driver.
-percpu-rw-semaphore.txt
- - RCU based read-write semaphore optimized for locking for reading
-perf/
- - info about the APM X-Gene SoC Performance Monitoring Unit (PMU).
-phy/
- - ino on Samsung USB 2.0 PHY adaptation layer.
-phy.txt
- - Description of the generic PHY framework.
-pi-futex.txt
- - documentation on lightweight priority inheritance futexes.
-pinctrl.txt
- - info on pinctrl subsystem and the PINMUX/PINCONF and drivers
-platform/
- - List of supported hardware by compal and Dell laptop.
-pnp.txt
- - Linux Plug and Play documentation.
-power/
- - directory with info on Linux PCI power management.
-powerpc/
- - directory with info on using Linux with the PowerPC.
-prctl/
- - directory with info on the priveledge control subsystem
-preempt-locking.txt
- - info on locking under a preemptive kernel.
-process/
- - how to work with the mainline kernel development process.
-pps/
- - directory with information on the pulse-per-second support
-pti/
- - directory with info on Intel MID PTI.
-ptp/
- - directory with info on support for IEEE 1588 PTP clocks in Linux.
-pwm.txt
- - info on the pulse width modulation driver subsystem
-rapidio/
- - directory with info on RapidIO packet-based fabric interconnect
-rbtree.txt
- - info on what red-black trees are and what they are for.
-remoteproc.txt
- - info on how to handle remote processor (e.g. AMP) offloads/usage.
-rfkill.txt
- - info on the radio frequency kill switch subsystem/support.
-robust-futex-ABI.txt
- - documentation of the robust futex ABI.
-robust-futexes.txt
- - a description of what robust futexes are.
-rpmsg.txt
- - info on the Remote Processor Messaging (rpmsg) Framework
-rtc.txt
- - notes on how to use the Real Time Clock (aka CMOS clock) driver.
-s390/
- - directory with info on using Linux on the IBM S390.
-scheduler/
- - directory with info on the scheduler.
-scsi/
- - directory with info on Linux scsi support.
-security/
- - directory that contains security-related info
-serial/
- - directory with info on the low level serial API.
-sgi-ioc4.txt
- - description of the SGI IOC4 PCI (multi function) device.
-sh/
- - directory with info on porting Linux to a new architecture.
-smsc_ece1099.txt
- -info on the smsc Keyboard Scan Expansion/GPIO Expansion device.
-sound/
- - directory with info on sound card support.
-spi/
- - overview of Linux kernel Serial Peripheral Interface (SPI) support.
-sphinx/
- - no documentation here, just files required by Sphinx toolchain.
-sphinx-static/
- - no documentation here, just files required by Sphinx toolchain.
-static-keys.txt
- - info on how static keys allow debug code in hotpaths via patching
-svga.txt
- - short guide on selecting video modes at boot via VGA BIOS.
-sync_file.txt
- - Sync file API guide.
-sysctl/
- - directory with info on the /proc/sys/* files.
-target/
- - directory with info on generating TCM v4 fabric .ko modules
-tee.txt
- - info on the TEE subsystem and drivers
-this_cpu_ops.txt
- - List rationale behind and the way to use this_cpu operations.
-thermal/
- - directory with information on managing thermal issues (CPU/temp)
-trace/
- - directory with info on tracing technologies within linux
-translations/
- - translations of this document from English to another language
-unaligned-memory-access.txt
- - info on how to avoid arch breaking unaligned memory access in code.
-unshare.txt
- - description of the Linux unshare system call.
-usb/
- - directory with info regarding the Universal Serial Bus.
-vfio.txt
- - info on Virtual Function I/O used in guest/hypervisor instances.
-video-output.txt
- - sysfs class driver interface to enable/disable a video output device.
-virtual/
- - directory with information on the various linux virtualizations.
-vm/
- - directory with info on the Linux vm code.
-w1/
- - directory with documents regarding the 1-wire (w1) subsystem.
-watchdog/
- - how to auto-reboot Linux if it has "fallen and can't get up". ;-)
-wimax/
- - directory with info about Intel Wireless Wimax Connections
-core-api/workqueue.rst
- - information on the Concurrency Managed Workqueue implementation
-x86/x86_64/
- - directory with info on Linux support for AMD x86-64 (Hammer) machines.
-xillybus.txt
- - Overview and basic ui of xillybus driver
-xtensa/
- - directory with documents relating to arch/xtensa port/implementation
-xz.txt
- - how to make use of the XZ data compression within linux kernel
-zorro.txt
- - info on writing drivers for Zorro bus devices found on Amigas.
diff --git a/Documentation/ABI/stable/sysfs-driver-usb-usbtmc b/Documentation/ABI/stable/sysfs-driver-usb-usbtmc
index e960cd027e1e..a9e123ba32cd 100644
--- a/Documentation/ABI/stable/sysfs-driver-usb-usbtmc
+++ b/Documentation/ABI/stable/sysfs-driver-usb-usbtmc
@@ -25,38 +25,3 @@ Description:
4.2.2.
The files are read only.
-
-
-What: /sys/bus/usb/drivers/usbtmc/*/TermChar
-Date: August 2008
-Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Description:
- This file is the TermChar value to be sent to the USB TMC
- device as described by the document, "Universal Serial Bus Test
- and Measurement Class Specification
- (USBTMC) Revision 1.0" as published by the USB-IF.
-
- Note that the TermCharEnabled file determines if this value is
- sent to the device or not.
-
-
-What: /sys/bus/usb/drivers/usbtmc/*/TermCharEnabled
-Date: August 2008
-Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Description:
- This file determines if the TermChar is to be sent to the
- device on every transaction or not. For more details about
- this, please see the document, "Universal Serial Bus Test and
- Measurement Class Specification (USBTMC) Revision 1.0" as
- published by the USB-IF.
-
-
-What: /sys/bus/usb/drivers/usbtmc/*/auto_abort
-Date: August 2008
-Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Description:
- This file determines if the transaction of the USB TMC
- device is to be automatically aborted if there is any error.
- For more details about this, please see the document,
- "Universal Serial Bus Test and Measurement Class Specification
- (USBTMC) Revision 1.0" as published by the USB-IF.
diff --git a/Documentation/ABI/testing/configfs-stp-policy-p_sys-t b/Documentation/ABI/testing/configfs-stp-policy-p_sys-t
new file mode 100644
index 000000000000..b290d1c00dcf
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-stp-policy-p_sys-t
@@ -0,0 +1,41 @@
+What: /config/stp-policy/<device>:p_sys-t.<policy>/<node>/uuid
+Date: June 2018
+KernelVersion: 4.19
+Description:
+ UUID source identifier string, RW.
+ Default value is randomly generated at the mkdir <node> time.
+ Data coming from trace sources that use this <node> will be
+ tagged with this UUID in the MIPI SyS-T packet stream, to
+ allow the decoder to discern between different sources
+ within the same master/channel range, and identify the
+ higher level decoders that may be needed for each source.
+
+What: /config/stp-policy/<device>:p_sys-t.<policy>/<node>/do_len
+Date: June 2018
+KernelVersion: 4.19
+Description:
+ Include payload length in the MIPI SyS-T header, boolean.
+ If enabled, the SyS-T protocol encoder will include payload
+ length in each packet's metadata. This is normally redundant
+ if the underlying transport protocol supports marking message
+ boundaries (which STP does), so this is off by default.
+
+What: /config/stp-policy/<device>:p_sys-t.<policy>/<node>/ts_interval
+Date: June 2018
+KernelVersion: 4.19
+Description:
+ Time interval in milliseconds. Include a timestamp in the
+ MIPI SyS-T packet metadata, if this many milliseconds have
+ passed since the previous packet from this source. Zero is
+ the default and stands for "never send the timestamp".
+
+What: /config/stp-policy/<device>:p_sys-t.<policy>/<node>/clocksync_interval
+Date: June 2018
+KernelVersion: 4.19
+Description:
+ Time interval in milliseconds. Send a CLOCKSYNC packet if
+ this many milliseconds have passed since the previous
+ CLOCKSYNC packet from this source. Zero is the default and
+ stands for "never send the CLOCKSYNC". It makes sense to
+ use this option with sources that generate constant and/or
+ periodic data, like stm_heartbeat.
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uvc b/Documentation/ABI/testing/configfs-usb-gadget-uvc
index 9281e2aa38df..809765bd9573 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-uvc
+++ b/Documentation/ABI/testing/configfs-usb-gadget-uvc
@@ -12,6 +12,10 @@ Date: Dec 2014
KernelVersion: 4.0
Description: Control descriptors
+ All attributes read only:
+ bInterfaceNumber - USB interface number for this
+ streaming interface
+
What: /config/usb-gadget/gadget/functions/uvc.name/control/class
Date: Dec 2014
KernelVersion: 4.0
@@ -109,6 +113,10 @@ Date: Dec 2014
KernelVersion: 4.0
Description: Streaming descriptors
+ All attributes read only:
+ bInterfaceNumber - USB interface number for this
+ streaming interface
+
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class
Date: Dec 2014
KernelVersion: 4.0
@@ -160,6 +168,10 @@ Description: Specific MJPEG format descriptors
All attributes read only,
except bmaControls and bDefaultFrameIndex:
+ bFormatIndex - unique id for this format descriptor;
+ only defined after parent header is
+ linked into the streaming class;
+ read-only
bmaControls - this format's data for bmaControls in
the streaming header
bmInterfaceFlags - specifies interlace information,
@@ -177,6 +189,10 @@ Date: Dec 2014
KernelVersion: 4.0
Description: Specific MJPEG frame descriptors
+ bFrameIndex - unique id for this framedescriptor;
+ only defined after parent format is
+ linked into the streaming header;
+ read-only
dwFrameInterval - indicates how frame interval can be
programmed; a number of values
separated by newline can be specified
@@ -204,6 +220,10 @@ Date: Dec 2014
KernelVersion: 4.0
Description: Specific uncompressed format descriptors
+ bFormatIndex - unique id for this format descriptor;
+ only defined after parent header is
+ linked into the streaming class;
+ read-only
bmaControls - this format's data for bmaControls in
the streaming header
bmInterfaceFlags - specifies interlace information,
@@ -224,6 +244,10 @@ Date: Dec 2014
KernelVersion: 4.0
Description: Specific uncompressed frame descriptors
+ bFrameIndex - unique id for this framedescriptor;
+ only defined after parent format is
+ linked into the streaming header;
+ read-only
dwFrameInterval - indicates how frame interval can be
programmed; a number of values
separated by newline can be specified
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index a5b4f223641d..8127a08e366d 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -199,7 +199,7 @@ Description:
What: /sys/bus/iio/devices/iio:deviceX/in_positionrelative_x_raw
What: /sys/bus/iio/devices/iio:deviceX/in_positionrelative_y_raw
-KernelVersion: 4.18
+KernelVersion: 4.19
Contact: linux-iio@vger.kernel.org
Description:
Relative position in direction x or y on a pad (may be
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 44d4b2be92fd..8bfee557e50e 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -323,3 +323,27 @@ Description:
This is similar to /sys/bus/pci/drivers_autoprobe, but
affects only the VFs associated with a specific PF.
+
+What: /sys/bus/pci/devices/.../p2pmem/size
+Date: November 2017
+Contact: Logan Gunthorpe <logang@deltatee.com>
+Description:
+ If the device has any Peer-to-Peer memory registered, this
+ file contains the total amount of memory that the device
+ provides (in decimal).
+
+What: /sys/bus/pci/devices/.../p2pmem/available
+Date: November 2017
+Contact: Logan Gunthorpe <logang@deltatee.com>
+Description:
+ If the device has any Peer-to-Peer memory registered, this
+ file contains the amount of memory that has not been
+ allocated (in decimal).
+
+What: /sys/bus/pci/devices/.../p2pmem/published
+Date: November 2017
+Contact: Logan Gunthorpe <logang@deltatee.com>
+Description:
+ If the device has any Peer-to-Peer memory registered, this
+ file contains a '1' if the memory has been published for
+ use outside the driver that owns the device.
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index 08d456e07b53..559baa5c418c 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -189,6 +189,16 @@ Description:
The file will read "hotplug", "wired" and "not used" if the
information is available, and "unknown" otherwise.
+What: /sys/bus/usb/devices/.../(hub interface)/portX/location
+Date: October 2018
+Contact: Bjørn Mork <bjorn@mork.no>
+Description:
+ Some platforms provide usb port physical location through
+ firmware. This is used by the kernel to pair up logical ports
+ mapping to the same physical connector. The attribute exposes the
+ raw location value as a hex integer.
+
+
What: /sys/bus/usb/devices/.../(hub interface)/portX/quirks
Date: May 2018
Contact: Nicolas Boichat <drinkcat@chromium.org>
@@ -219,7 +229,14 @@ Description:
ports and report them to the kernel. This attribute is to expose
the number of over-current situation occurred on a specific port
to user space. This file will contain an unsigned 32 bit value
- which wraps to 0 after its maximum is reached.
+ which wraps to 0 after its maximum is reached. This file supports
+ poll() for monitoring changes to this value in user space.
+
+ Any time this value changes the corresponding hub device will send a
+ udev event with the following attributes:
+
+ OVER_CURRENT_PORT=/sys/bus/usb/devices/.../(hub interface)/portX
+ OVER_CURRENT_COUNT=[current value of this sysfs attribute]
What: /sys/bus/usb/devices/.../(hub interface)/portX/usb3_lpm_permit
Date: November 2015
diff --git a/Documentation/ABI/testing/sysfs-bus-vmbus b/Documentation/ABI/testing/sysfs-bus-vmbus
new file mode 100644
index 000000000000..91e6c065973c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-vmbus
@@ -0,0 +1,21 @@
+What: /sys/bus/vmbus/devices/.../driver_override
+Date: August 2019
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description:
+ This file allows the driver for a device to be specified which
+ will override standard static and dynamic ID matching. When
+ specified, only a driver with a name matching the value written
+ to driver_override will have an opportunity to bind to the
+ device. The override is specified by writing a string to the
+ driver_override file (echo uio_hv_generic > driver_override) and
+ may be cleared with an empty string (echo > driver_override).
+ This returns the device to standard matching rules binding.
+ Writing to driver_override does not automatically unbind the
+ device from its current driver or make any attempt to
+ automatically load the specified driver. If no driver with a
+ matching name is currently loaded in the kernel, the device
+ will not bind to any driver. This also allows devices to
+ opt-out of driver binding using a driver_override name such as
+ "none". Only a single driver may be specified in the override,
+ there is no support for parsing delimiters.
+
diff --git a/Documentation/ABI/testing/sysfs-class-lcd-s6e63m0 b/Documentation/ABI/testing/sysfs-class-lcd-s6e63m0
deleted file mode 100644
index ae0a2d3dcc07..000000000000
--- a/Documentation/ABI/testing/sysfs-class-lcd-s6e63m0
+++ /dev/null
@@ -1,27 +0,0 @@
-sysfs interface for the S6E63M0 AMOLED LCD panel driver
--------------------------------------------------------
-
-What: /sys/class/lcd/<lcd>/gamma_mode
-Date: May, 2010
-KernelVersion: v2.6.35
-Contact: dri-devel@lists.freedesktop.org
-Description:
- (RW) Read or write the gamma mode. Following three modes are
- supported:
- 0 - gamma value 2.2,
- 1 - gamma value 1.9 and
- 2 - gamma value 1.7.
-
-
-What: /sys/class/lcd/<lcd>/gamma_table
-Date: May, 2010
-KernelVersion: v2.6.35
-Contact: dri-devel@lists.freedesktop.org
-Description:
- (RO) Displays the size of the gamma table i.e. the number of
- gamma modes available.
-
-This is a backlight lcd driver. These interfaces are an extension to the API
-documented in Documentation/ABI/testing/sysfs-class-lcd and in
-Documentation/ABI/stable/sysfs-class-backlight (under
-/sys/class/backlight/<backlight>/).
diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx b/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
new file mode 100644
index 000000000000..45b1e605d355
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
@@ -0,0 +1,22 @@
+What: /sys/class/leds/<led>/hw_pattern
+Date: September 2018
+KernelVersion: 4.20
+Description:
+ Specify a hardware pattern for the SC27XX LED. For the SC27XX
+ LED controller, it only supports 4 stages to make a single
+ hardware pattern, which is used to configure the rise time,
+ high time, fall time and low time for the breathing mode.
+
+ For the breathing mode, the SC27XX LED only expects one brightness
+ for the high stage. To be compatible with the hardware pattern
+ format, we should set brightness as 0 for rise stage, fall
+ stage and low stage.
+
+ Min stage duration: 125 ms
+ Max stage duration: 31875 ms
+
+ Since the stage duration step is 125 ms, the duration should be
+ a multiplier of 125, like 125ms, 250ms, 375ms, 500ms ... 31875ms.
+
+ Thus the format of the hardware pattern values should be:
+ "0 rise_duration brightness high_duration 0 fall_duration 0 low_duration".
diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-pattern b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
new file mode 100644
index 000000000000..fb3d1e03b881
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
@@ -0,0 +1,82 @@
+What: /sys/class/leds/<led>/pattern
+Date: September 2018
+KernelVersion: 4.20
+Description:
+ Specify a software pattern for the LED, that supports altering
+ the brightness for the specified duration with one software
+ timer. It can do gradual dimming and step change of brightness.
+
+ The pattern is given by a series of tuples, of brightness and
+ duration (ms). The LED is expected to traverse the series and
+ each brightness value for the specified duration. Duration of
+ 0 means brightness should immediately change to new value, and
+ writing malformed pattern deactivates any active one.
+
+ 1. For gradual dimming, the dimming interval now is set as 50
+ milliseconds. So the tuple with duration less than dimming
+ interval (50ms) is treated as a step change of brightness,
+ i.e. the subsequent brightness will be applied without adding
+ intervening dimming intervals.
+
+ The gradual dimming format of the software pattern values should be:
+ "brightness_1 duration_1 brightness_2 duration_2 brightness_3
+ duration_3 ...". For example:
+
+ echo 0 1000 255 2000 > pattern
+
+ It will make the LED go gradually from zero-intensity to max (255)
+ intensity in 1000 milliseconds, then back to zero intensity in 2000
+ milliseconds:
+
+ LED brightness
+ ^
+ 255-| / \ / \ /
+ | / \ / \ /
+ | / \ / \ /
+ | / \ / \ /
+ 0-| / \/ \/
+ +---0----1----2----3----4----5----6------------> time (s)
+
+ 2. To make the LED go instantly from one brigntess value to another,
+ we should use use zero-time lengths (the brightness must be same as
+ the previous tuple's). So the format should be:
+ "brightness_1 duration_1 brightness_1 0 brightness_2 duration_2
+ brightness_2 0 ...". For example:
+
+ echo 0 1000 0 0 255 2000 255 0 > pattern
+
+ It will make the LED stay off for one second, then stay at max brightness
+ for two seconds:
+
+ LED brightness
+ ^
+ 255-| +---------+ +---------+
+ | | | | |
+ | | | | |
+ | | | | |
+ 0-| -----+ +----+ +----
+ +---0----1----2----3----4----5----6------------> time (s)
+
+What: /sys/class/leds/<led>/hw_pattern
+Date: September 2018
+KernelVersion: 4.20
+Description:
+ Specify a hardware pattern for the LED, for LED hardware that
+ supports autonomously controlling brightness over time, according
+ to some preprogrammed hardware patterns. It deactivates any active
+ software pattern.
+
+ Since different LED hardware can have different semantics of
+ hardware patterns, each driver is expected to provide its own
+ description for the hardware patterns in their ABI documentation
+ file.
+
+What: /sys/class/leds/<led>/repeat
+Date: September 2018
+KernelVersion: 4.20
+Description:
+ Specify a pattern repeat number. -1 means repeat indefinitely,
+ other negative numbers and number 0 are invalid.
+
+ This file will always return the originally written repeat
+ number.
diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net
index 2f1788111cd9..664a8f6a634f 100644
--- a/Documentation/ABI/testing/sysfs-class-net
+++ b/Documentation/ABI/testing/sysfs-class-net
@@ -91,6 +91,24 @@ Description:
stacked (e.g: VLAN interfaces) but still have the same MAC
address as their parent device.
+What: /sys/class/net/<iface>/dev_port
+Date: February 2014
+KernelVersion: 3.15
+Contact: netdev@vger.kernel.org
+Description:
+ Indicates the port number of this network device, formatted
+ as a decimal value. Some NICs have multiple independent ports
+ on the same PCI bus, device and function. This attribute allows
+ userspace to distinguish the respective interfaces.
+
+ Note: some device drivers started to use 'dev_id' for this
+ purpose since long before 3.15 and have not adopted the new
+ attribute ever since. To query the port number, some tools look
+ exclusively at 'dev_port', while others only consult 'dev_id'.
+ If a network device has multiple client adapter ports as
+ described in the previous paragraph and does not set this
+ attribute to its port number, it's a kernel bug.
+
What: /sys/class/net/<iface>/dormant
Date: March 2006
KernelVersion: 2.6.17
@@ -117,7 +135,7 @@ Description:
full: full duplex
Note: This attribute is only valid for interfaces that implement
- the ethtool get_settings method (mostly Ethernet).
+ the ethtool get_link_ksettings method (mostly Ethernet).
What: /sys/class/net/<iface>/flags
Date: April 2005
@@ -224,7 +242,7 @@ Description:
an integer representing the link speed in Mbits/sec.
Note: this attribute is only valid for interfaces that implement
- the ethtool get_settings method (mostly Ethernet ).
+ the ethtool get_link_ksettings method (mostly Ethernet).
What: /sys/class/net/<iface>/tx_queue_len
Date: April 2005
diff --git a/Documentation/ABI/testing/sysfs-class-net-dsa b/Documentation/ABI/testing/sysfs-class-net-dsa
new file mode 100644
index 000000000000..f240221e071e
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-dsa
@@ -0,0 +1,7 @@
+What: /sys/class/net/<iface>/tagging
+Date: August 2018
+KernelVersion: 4.20
+Contact: netdev@vger.kernel.org
+Description:
+ String indicating the type of tagging protocol used by the
+ DSA slave network device.
diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs
index 94a24aedcdb2..3ac41774ad3c 100644
--- a/Documentation/ABI/testing/sysfs-fs-f2fs
+++ b/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -121,7 +121,22 @@ What: /sys/fs/f2fs/<disk>/idle_interval
Date: January 2016
Contact: "Jaegeuk Kim" <jaegeuk@kernel.org>
Description:
- Controls the idle timing.
+ Controls the idle timing for all paths other than
+ discard and gc path.
+
+What: /sys/fs/f2fs/<disk>/discard_idle_interval
+Date: September 2018
+Contact: "Chao Yu" <yuchao0@huawei.com>
+Contact: "Sahitya Tummala" <stummala@codeaurora.org>
+Description:
+ Controls the idle timing for discard path.
+
+What: /sys/fs/f2fs/<disk>/gc_idle_interval
+Date: September 2018
+Contact: "Chao Yu" <yuchao0@huawei.com>
+Contact: "Sahitya Tummala" <stummala@codeaurora.org>
+Description:
+ Controls the idle timing for gc path.
What: /sys/fs/f2fs/<disk>/iostat_enable
Date: August 2017
diff --git a/Documentation/ABI/testing/sysfs-platform-lg-laptop b/Documentation/ABI/testing/sysfs-platform-lg-laptop
new file mode 100644
index 000000000000..cf47749b19df
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-lg-laptop
@@ -0,0 +1,35 @@
+What: /sys/devices/platform/lg-laptop/reader_mode
+Date: October 2018
+KernelVersion: 4.20
+Contact: "Matan Ziv-Av <matan@svgalib.org>
+Description:
+ Control reader mode. 1 means on, 0 means off.
+
+What: /sys/devices/platform/lg-laptop/fn_lock
+Date: October 2018
+KernelVersion: 4.20
+Contact: "Matan Ziv-Av <matan@svgalib.org>
+Description:
+ Control FN lock mode. 1 means on, 0 means off.
+
+What: /sys/devices/platform/lg-laptop/battery_care_limit
+Date: October 2018
+KernelVersion: 4.20
+Contact: "Matan Ziv-Av <matan@svgalib.org>
+Description:
+ Maximal battery charge level. Accepted values are 80 or 100.
+
+What: /sys/devices/platform/lg-laptop/fan_mode
+Date: October 2018
+KernelVersion: 4.20
+Contact: "Matan Ziv-Av <matan@svgalib.org>
+Description:
+ Control fan mode. 1 for performance mode, 0 for silent mode.
+
+What: /sys/devices/platform/lg-laptop/usb_charge
+Date: October 2018
+KernelVersion: 4.20
+Contact: "Matan Ziv-Av <matan@svgalib.org>
+Description:
+ Control USB port charging when device is turned off.
+ 1 means on, 0 means off.
diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power
index 2f813d644c69..18b7dc929234 100644
--- a/Documentation/ABI/testing/sysfs-power
+++ b/Documentation/ABI/testing/sysfs-power
@@ -99,7 +99,7 @@ Description:
this file, the suspend image will be as small as possible.
Reading from this file will display the current image size
- limit, which is set to 500 MB by default.
+ limit, which is set to around 2/5 of available RAM by default.
What: /sys/power/pm_trace
Date: August 2006
diff --git a/Documentation/PCI/00-INDEX b/Documentation/PCI/00-INDEX
deleted file mode 100644
index 206b1d5c1e71..000000000000
--- a/Documentation/PCI/00-INDEX
+++ /dev/null
@@ -1,26 +0,0 @@
-00-INDEX
- - this file
-acpi-info.txt
- - info on how PCI host bridges are represented in ACPI
-MSI-HOWTO.txt
- - the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ.
-PCIEBUS-HOWTO.txt
- - a guide describing the PCI Express Port Bus driver
-pci-error-recovery.txt
- - info on PCI error recovery
-pci-iov-howto.txt
- - the PCI Express I/O Virtualization HOWTO
-pci.txt
- - info on the PCI subsystem for device driver authors
-pcieaer-howto.txt
- - the PCI Express Advanced Error Reporting Driver Guide HOWTO
-endpoint/pci-endpoint.txt
- - guide to add endpoint controller driver and endpoint function driver.
-endpoint/pci-endpoint-cfs.txt
- - guide to use configfs to configure the PCI endpoint function.
-endpoint/pci-test-function.txt
- - specification of *PCI test* function device.
-endpoint/pci-test-howto.txt
- - userguide for PCI endpoint test function.
-endpoint/function/binding/
- - binding documentation for PCI endpoint function
diff --git a/Documentation/PCI/endpoint/pci-test-howto.txt b/Documentation/PCI/endpoint/pci-test-howto.txt
index e40cf0fb58d7..040479f437a5 100644
--- a/Documentation/PCI/endpoint/pci-test-howto.txt
+++ b/Documentation/PCI/endpoint/pci-test-howto.txt
@@ -99,17 +99,20 @@ Note that the devices listed here correspond to the value populated in 1.4 above
2.2 Using Endpoint Test function Device
pcitest.sh added in tools/pci/ can be used to run all the default PCI endpoint
-tests. Before pcitest.sh can be used pcitest.c should be compiled using the
-following commands.
+tests. To compile this tool the following commands should be used:
- cd <kernel-dir>
- make headers_install ARCH=arm
- arm-linux-gnueabihf-gcc -Iusr/include tools/pci/pcitest.c -o pcitest
- cp pcitest <rootfs>/usr/sbin/
- cp tools/pci/pcitest.sh <rootfs>
+ # cd <kernel-dir>
+ # make -C tools/pci
+
+or if you desire to compile and install in your system:
+
+ # cd <kernel-dir>
+ # make -C tools/pci install
+
+The tool and script will be located in <rootfs>/usr/bin/
2.2.1 pcitest.sh Output
- # ./pcitest.sh
+ # pcitest.sh
BAR tests
BAR0: OKAY
diff --git a/Documentation/PCI/pci-error-recovery.txt b/Documentation/PCI/pci-error-recovery.txt
index 688b69121e82..0b6bb3ef449e 100644
--- a/Documentation/PCI/pci-error-recovery.txt
+++ b/Documentation/PCI/pci-error-recovery.txt
@@ -110,7 +110,7 @@ The actual steps taken by a platform to recover from a PCI error
event will be platform-dependent, but will follow the general
sequence described below.
-STEP 0: Error Event: ERR_NONFATAL
+STEP 0: Error Event
-------------------
A PCI bus error is detected by the PCI hardware. On powerpc, the slot
is isolated, in that all I/O is blocked: all reads return 0xffffffff,
@@ -228,7 +228,13 @@ proceeds to either STEP3 (Link Reset) or to STEP 5 (Resume Operations).
If any driver returned PCI_ERS_RESULT_NEED_RESET, then the platform
proceeds to STEP 4 (Slot Reset)
-STEP 3: Slot Reset
+STEP 3: Link Reset
+------------------
+The platform resets the link. This is a PCI-Express specific step
+and is done whenever a fatal error has been detected that can be
+"solved" by resetting the link.
+
+STEP 4: Slot Reset
------------------
In response to a return value of PCI_ERS_RESULT_NEED_RESET, the
@@ -314,7 +320,7 @@ Failure).
>>> However, it probably should.
-STEP 4: Resume Operations
+STEP 5: Resume Operations
-------------------------
The platform will call the resume() callback on all affected device
drivers if all drivers on the segment have returned
@@ -326,7 +332,7 @@ a result code.
At this point, if a new error happens, the platform will restart
a new error recovery sequence.
-STEP 5: Permanent Failure
+STEP 6: Permanent Failure
-------------------------
A "permanent failure" has occurred, and the platform cannot recover
the device. The platform will call error_detected() with a
@@ -349,27 +355,6 @@ errors. See the discussion in powerpc/eeh-pci-error-recovery.txt
for additional detail on real-life experience of the causes of
software errors.
-STEP 0: Error Event: ERR_FATAL
--------------------
-PCI bus error is detected by the PCI hardware. On powerpc, the slot is
-isolated, in that all I/O is blocked: all reads return 0xffffffff, all
-writes are ignored.
-
-STEP 1: Remove devices
---------------------
-Platform removes the devices depending on the error agent, it could be
-this port for all subordinates or upstream component (likely downstream
-port)
-
-STEP 2: Reset link
---------------------
-The platform resets the link. This is a PCI-Express specific step and is
-done whenever a fatal error has been detected that can be "solved" by
-resetting the link.
-
-STEP 3: Re-enumerate the devices
---------------------
-Initiates the re-enumeration.
Conclusion; General Remarks
---------------------------
diff --git a/Documentation/RCU/00-INDEX b/Documentation/RCU/00-INDEX
deleted file mode 100644
index f46980c060aa..000000000000
--- a/Documentation/RCU/00-INDEX
+++ /dev/null
@@ -1,34 +0,0 @@
-00-INDEX
- - This file
-arrayRCU.txt
- - Using RCU to Protect Read-Mostly Arrays
-checklist.txt
- - Review Checklist for RCU Patches
-listRCU.txt
- - Using RCU to Protect Read-Mostly Linked Lists
-lockdep.txt
- - RCU and lockdep checking
-lockdep-splat.txt
- - RCU Lockdep splats explained.
-NMI-RCU.txt
- - Using RCU to Protect Dynamic NMI Handlers
-rcu_dereference.txt
- - Proper care and feeding of return values from rcu_dereference()
-rcubarrier.txt
- - RCU and Unloadable Modules
-rculist_nulls.txt
- - RCU list primitives for use with SLAB_TYPESAFE_BY_RCU
-rcuref.txt
- - Reference-count design for elements of lists/arrays protected by RCU
-rcu.txt
- - RCU Concepts
-RTFP.txt
- - List of RCU papers (bibliography) going back to 1980.
-stallwarn.txt
- - RCU CPU stall warnings (module parameter rcu_cpu_stall_suppress)
-torture.txt
- - RCU Torture Test Operation (CONFIG_RCU_TORTURE_TEST)
-UP.txt
- - RCU on Uniprocessor Systems
-whatisRCU.txt
- - What is RCU?
diff --git a/Documentation/RCU/Design/Data-Structures/Data-Structures.html b/Documentation/RCU/Design/Data-Structures/Data-Structures.html
index f5120a00f511..1d2051c0c3fc 100644
--- a/Documentation/RCU/Design/Data-Structures/Data-Structures.html
+++ b/Documentation/RCU/Design/Data-Structures/Data-Structures.html
@@ -1227,9 +1227,11 @@ to overflow the counter, this approach corrects the
CPU enters the idle loop from process context.
</p><p>The <tt>-&gt;dynticks</tt> field counts the corresponding
-CPU's transitions to and from dyntick-idle mode, so that this counter
-has an even value when the CPU is in dyntick-idle mode and an odd
-value otherwise.
+CPU's transitions to and from either dyntick-idle or user mode, so
+that this counter has an even value when the CPU is in dyntick-idle
+mode or user mode and an odd value otherwise. The transitions to/from
+user mode need to be counted for user mode adaptive-ticks support
+(see timers/NO_HZ.txt).
</p><p>The <tt>-&gt;rcu_need_heavy_qs</tt> field is used
to record the fact that the RCU core code would really like to
@@ -1372,8 +1374,7 @@ that is, if the CPU is currently idle.
Accessor Functions</a></h3>
<p>The following listing shows the
-<tt>rcu_get_root()</tt>, <tt>rcu_for_each_node_breadth_first</tt>,
-<tt>rcu_for_each_nonleaf_node_breadth_first()</tt>, and
+<tt>rcu_get_root()</tt>, <tt>rcu_for_each_node_breadth_first</tt> and
<tt>rcu_for_each_leaf_node()</tt> function and macros:
<pre>
@@ -1386,13 +1387,9 @@ Accessor Functions</a></h3>
7 for ((rnp) = &amp;(rsp)-&gt;node[0]; \
8 (rnp) &lt; &amp;(rsp)-&gt;node[NUM_RCU_NODES]; (rnp)++)
9
- 10 #define rcu_for_each_nonleaf_node_breadth_first(rsp, rnp) \
- 11 for ((rnp) = &amp;(rsp)-&gt;node[0]; \
- 12 (rnp) &lt; (rsp)-&gt;level[NUM_RCU_LVLS - 1]; (rnp)++)
- 13
- 14 #define rcu_for_each_leaf_node(rsp, rnp) \
- 15 for ((rnp) = (rsp)-&gt;level[NUM_RCU_LVLS - 1]; \
- 16 (rnp) &lt; &amp;(rsp)-&gt;node[NUM_RCU_NODES]; (rnp)++)
+ 10 #define rcu_for_each_leaf_node(rsp, rnp) \
+ 11 for ((rnp) = (rsp)-&gt;level[NUM_RCU_LVLS - 1]; \
+ 12 (rnp) &lt; &amp;(rsp)-&gt;node[NUM_RCU_NODES]; (rnp)++)
</pre>
<p>The <tt>rcu_get_root()</tt> simply returns a pointer to the
@@ -1405,10 +1402,7 @@ macro takes advantage of the layout of the <tt>rcu_node</tt>
structures in the <tt>rcu_state</tt> structure's
<tt>-&gt;node[]</tt> array, performing a breadth-first traversal by
simply traversing the array in order.
-The <tt>rcu_for_each_nonleaf_node_breadth_first()</tt> macro operates
-similarly, but traverses only the first part of the array, thus excluding
-the leaf <tt>rcu_node</tt> structures.
-Finally, the <tt>rcu_for_each_leaf_node()</tt> macro traverses only
+Similarly, the <tt>rcu_for_each_leaf_node()</tt> macro traverses only
the last part of the array, thus traversing only the leaf
<tt>rcu_node</tt> structures.
@@ -1416,15 +1410,14 @@ the last part of the array, thus traversing only the leaf
<tr><th>&nbsp;</th></tr>
<tr><th align="left">Quick Quiz:</th></tr>
<tr><td>
- What do <tt>rcu_for_each_nonleaf_node_breadth_first()</tt> and
+ What does
<tt>rcu_for_each_leaf_node()</tt> do if the <tt>rcu_node</tt> tree
contains only a single node?
</td></tr>
<tr><th align="left">Answer:</th></tr>
<tr><td bgcolor="#ffffff"><font color="ffffff">
In the single-node case,
- <tt>rcu_for_each_nonleaf_node_breadth_first()</tt> is a no-op
- and <tt>rcu_for_each_leaf_node()</tt> traverses the single node.
+ <tt>rcu_for_each_leaf_node()</tt> traverses the single node.
</font></td></tr>
<tr><td>&nbsp;</td></tr>
</table>
diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html
index 7394f034be65..e62c7c34a369 100644
--- a/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html
+++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html
@@ -12,10 +12,9 @@ high efficiency and minimal disturbance, expedited grace periods accept
lower efficiency and significant disturbance to attain shorter latencies.
<p>
-There are three flavors of RCU (RCU-bh, RCU-preempt, and RCU-sched),
-but only two flavors of expedited grace periods because the RCU-bh
-expedited grace period maps onto the RCU-sched expedited grace period.
-Each of the remaining two implementations is covered in its own section.
+There are two flavors of RCU (RCU-preempt and RCU-sched), with an earlier
+third RCU-bh flavor having been implemented in terms of the other two.
+Each of the two implementations is covered in its own section.
<ol>
<li> <a href="#Expedited Grace Period Design">
@@ -158,7 +157,7 @@ whether or not the current CPU is in an RCU read-side critical section.
The best that <tt>sync_sched_exp_handler()</tt> can do is to check
for idle, on the off-chance that the CPU went idle while the IPI
was in flight.
-If the CPU is idle, then tt>sync_sched_exp_handler()</tt> reports
+If the CPU is idle, then <tt>sync_sched_exp_handler()</tt> reports
the quiescent state.
<p>
diff --git a/Documentation/RCU/Design/Requirements/Requirements.html b/Documentation/RCU/Design/Requirements/Requirements.html
index 49690228b1c6..43c4e2f05f40 100644
--- a/Documentation/RCU/Design/Requirements/Requirements.html
+++ b/Documentation/RCU/Design/Requirements/Requirements.html
@@ -1306,8 +1306,6 @@ doing so would degrade real-time response.
<p>
This non-requirement appeared with preemptible RCU.
-If you need a grace period that waits on non-preemptible code regions, use
-<a href="#Sched Flavor">RCU-sched</a>.
<h2><a name="Parallelism Facts of Life">Parallelism Facts of Life</a></h2>
@@ -2165,14 +2163,9 @@ however, this is not a panacea because there would be severe restrictions
on what operations those callbacks could invoke.
<p>
-Perhaps surprisingly, <tt>synchronize_rcu()</tt>,
-<a href="#Bottom-Half Flavor"><tt>synchronize_rcu_bh()</tt></a>
-(<a href="#Bottom-Half Flavor">discussed below</a>),
-<a href="#Sched Flavor"><tt>synchronize_sched()</tt></a>,
+Perhaps surprisingly, <tt>synchronize_rcu()</tt> and
<tt>synchronize_rcu_expedited()</tt>,
-<tt>synchronize_rcu_bh_expedited()</tt>, and
-<tt>synchronize_sched_expedited()</tt>
-will all operate normally
+will operate normally
during very early boot, the reason being that there is only one CPU
and preemption is disabled.
This means that the call <tt>synchronize_rcu()</tt> (or friends)
@@ -2269,12 +2262,23 @@ Thankfully, RCU update-side primitives, including
The name notwithstanding, some Linux-kernel architectures
can have nested NMIs, which RCU must handle correctly.
Andy Lutomirski
-<a href="https://lkml.kernel.org/g/CALCETrXLq1y7e_dKFPgou-FKHB6Pu-r8+t-6Ds+8=va7anBWDA@mail.gmail.com">surprised me</a>
+<a href="https://lkml.kernel.org/r/CALCETrXLq1y7e_dKFPgou-FKHB6Pu-r8+t-6Ds+8=va7anBWDA@mail.gmail.com">surprised me</a>
with this requirement;
he also kindly surprised me with
-<a href="https://lkml.kernel.org/g/CALCETrXSY9JpW3uE6H8WYk81sg56qasA2aqmjMPsq5dOtzso=g@mail.gmail.com">an algorithm</a>
+<a href="https://lkml.kernel.org/r/CALCETrXSY9JpW3uE6H8WYk81sg56qasA2aqmjMPsq5dOtzso=g@mail.gmail.com">an algorithm</a>
that meets this requirement.
+<p>
+Furthermore, NMI handlers can be interrupted by what appear to RCU
+to be normal interrupts.
+One way that this can happen is for code that directly invokes
+<tt>rcu_irq_enter()</tt> and </tt>rcu_irq_exit()</tt> to be called
+from an NMI handler.
+This astonishing fact of life prompted the current code structure,
+which has <tt>rcu_irq_enter()</tt> invoking <tt>rcu_nmi_enter()</tt>
+and <tt>rcu_irq_exit()</tt> invoking <tt>rcu_nmi_exit()</tt>.
+And yes, I also learned of this requirement the hard way.
+
<h3><a name="Loadable Modules">Loadable Modules</a></h3>
<p>
@@ -2394,30 +2398,9 @@ when invoked from a CPU-hotplug notifier.
<p>
RCU depends on the scheduler, and the scheduler uses RCU to
protect some of its data structures.
-This means the scheduler is forbidden from acquiring
-the runqueue locks and the priority-inheritance locks
-in the middle of an outermost RCU read-side critical section unless either
-(1)&nbsp;it releases them before exiting that same
-RCU read-side critical section, or
-(2)&nbsp;interrupts are disabled across
-that entire RCU read-side critical section.
-This same prohibition also applies (recursively!) to any lock that is acquired
-while holding any lock to which this prohibition applies.
-Adhering to this rule prevents preemptible RCU from invoking
-<tt>rcu_read_unlock_special()</tt> while either runqueue or
-priority-inheritance locks are held, thus avoiding deadlock.
-
-<p>
-Prior to v4.4, it was only necessary to disable preemption across
-RCU read-side critical sections that acquired scheduler locks.
-In v4.4, expedited grace periods started using IPIs, and these
-IPIs could force a <tt>rcu_read_unlock()</tt> to take the slowpath.
-Therefore, this expedited-grace-period change required disabling of
-interrupts, not just preemption.
-
-<p>
-For RCU's part, the preemptible-RCU <tt>rcu_read_unlock()</tt>
-implementation must be written carefully to avoid similar deadlocks.
+The preemptible-RCU <tt>rcu_read_unlock()</tt>
+implementation must therefore be written carefully to avoid deadlocks
+involving the scheduler's runqueue and priority-inheritance locks.
In particular, <tt>rcu_read_unlock()</tt> must tolerate an
interrupt where the interrupt handler invokes both
<tt>rcu_read_lock()</tt> and <tt>rcu_read_unlock()</tt>.
@@ -2426,7 +2409,7 @@ negative nesting levels to avoid destructive recursion via
interrupt handler's use of RCU.
<p>
-This pair of mutual scheduler-RCU requirements came as a
+This scheduler-RCU requirement came as a
<a href="https://lwn.net/Articles/453002/">complete surprise</a>.
<p>
@@ -2437,9 +2420,28 @@ when running context-switch-heavy workloads when built with
<tt>CONFIG_NO_HZ_FULL=y</tt>
<a href="http://www.rdrop.com/users/paulmck/scalability/paper/BareMetal.2015.01.15b.pdf">did come as a surprise [PDF]</a>.
RCU has made good progress towards meeting this requirement, even
-for context-switch-have <tt>CONFIG_NO_HZ_FULL=y</tt> workloads,
+for context-switch-heavy <tt>CONFIG_NO_HZ_FULL=y</tt> workloads,
but there is room for further improvement.
+<p>
+In the past, it was forbidden to disable interrupts across an
+<tt>rcu_read_unlock()</tt> unless that interrupt-disabled region
+of code also included the matching <tt>rcu_read_lock()</tt>.
+Violating this restriction could result in deadlocks involving the
+scheduler's runqueue and priority-inheritance spinlocks.
+This restriction was lifted when interrupt-disabled calls to
+<tt>rcu_read_unlock()</tt> started deferring the reporting of
+the resulting RCU-preempt quiescent state until the end of that
+interrupts-disabled region.
+This deferred reporting means that the scheduler's runqueue and
+priority-inheritance locks cannot be held while reporting an RCU-preempt
+quiescent state, which lifts the earlier restriction, at least from
+a deadlock perspective.
+Unfortunately, real-time systems using RCU priority boosting may
+need this restriction to remain in effect because deferred
+quiescent-state reporting also defers deboosting, which in turn
+degrades real-time latencies.
+
<h3><a name="Tracing and RCU">Tracing and RCU</a></h3>
<p>
@@ -2850,15 +2852,22 @@ The other four flavors are listed below, with requirements for each
described in a separate section.
<ol>
-<li> <a href="#Bottom-Half Flavor">Bottom-Half Flavor</a>
-<li> <a href="#Sched Flavor">Sched Flavor</a>
+<li> <a href="#Bottom-Half Flavor">Bottom-Half Flavor (Historical)</a>
+<li> <a href="#Sched Flavor">Sched Flavor (Historical)</a>
<li> <a href="#Sleepable RCU">Sleepable RCU</a>
<li> <a href="#Tasks RCU">Tasks RCU</a>
-<li> <a href="#Waiting for Multiple Grace Periods">
- Waiting for Multiple Grace Periods</a>
</ol>
-<h3><a name="Bottom-Half Flavor">Bottom-Half Flavor</a></h3>
+<h3><a name="Bottom-Half Flavor">Bottom-Half Flavor (Historical)</a></h3>
+
+<p>
+The RCU-bh flavor of RCU has since been expressed in terms of
+the other RCU flavors as part of a consolidation of the three
+flavors into a single flavor.
+The read-side API remains, and continues to disable softirq and to
+be accounted for by lockdep.
+Much of the material in this section is therefore strictly historical
+in nature.
<p>
The softirq-disable (AKA &ldquo;bottom-half&rdquo;,
@@ -2918,8 +2927,20 @@ includes
<tt>call_rcu_bh()</tt>,
<tt>rcu_barrier_bh()</tt>, and
<tt>rcu_read_lock_bh_held()</tt>.
+However, the update-side APIs are now simple wrappers for other RCU
+flavors, namely RCU-sched in CONFIG_PREEMPT=n kernels and RCU-preempt
+otherwise.
+
+<h3><a name="Sched Flavor">Sched Flavor (Historical)</a></h3>
-<h3><a name="Sched Flavor">Sched Flavor</a></h3>
+<p>
+The RCU-sched flavor of RCU has since been expressed in terms of
+the other RCU flavors as part of a consolidation of the three
+flavors into a single flavor.
+The read-side API remains, and continues to disable preemption and to
+be accounted for by lockdep.
+Much of the material in this section is therefore strictly historical
+in nature.
<p>
Before preemptible RCU, waiting for an RCU grace period had the
@@ -3139,94 +3160,14 @@ The tasks-RCU API is quite compact, consisting only of
<tt>call_rcu_tasks()</tt>,
<tt>synchronize_rcu_tasks()</tt>, and
<tt>rcu_barrier_tasks()</tt>.
-
-<h3><a name="Waiting for Multiple Grace Periods">
-Waiting for Multiple Grace Periods</a></h3>
-
-<p>
-Perhaps you have an RCU protected data structure that is accessed from
-RCU read-side critical sections, from softirq handlers, and from
-hardware interrupt handlers.
-That is three flavors of RCU, the normal flavor, the bottom-half flavor,
-and the sched flavor.
-How to wait for a compound grace period?
-
-<p>
-The best approach is usually to &ldquo;just say no!&rdquo; and
-insert <tt>rcu_read_lock()</tt> and <tt>rcu_read_unlock()</tt>
-around each RCU read-side critical section, regardless of what
-environment it happens to be in.
-But suppose that some of the RCU read-side critical sections are
-on extremely hot code paths, and that use of <tt>CONFIG_PREEMPT=n</tt>
-is not a viable option, so that <tt>rcu_read_lock()</tt> and
-<tt>rcu_read_unlock()</tt> are not free.
-What then?
-
-<p>
-You <i>could</i> wait on all three grace periods in succession, as follows:
-
-<blockquote>
-<pre>
- 1 synchronize_rcu();
- 2 synchronize_rcu_bh();
- 3 synchronize_sched();
-</pre>
-</blockquote>
-
-<p>
-This works, but triples the update-side latency penalty.
-In cases where this is not acceptable, <tt>synchronize_rcu_mult()</tt>
-may be used to wait on all three flavors of grace period concurrently:
-
-<blockquote>
-<pre>
- 1 synchronize_rcu_mult(call_rcu, call_rcu_bh, call_rcu_sched);
-</pre>
-</blockquote>
-
-<p>
-But what if it is necessary to also wait on SRCU?
-This can be done as follows:
-
-<blockquote>
-<pre>
- 1 static void call_my_srcu(struct rcu_head *head,
- 2 void (*func)(struct rcu_head *head))
- 3 {
- 4 call_srcu(&amp;my_srcu, head, func);
- 5 }
- 6
- 7 synchronize_rcu_mult(call_rcu, call_rcu_bh, call_rcu_sched, call_my_srcu);
-</pre>
-</blockquote>
-
-<p>
-If you needed to wait on multiple different flavors of SRCU
-(but why???), you would need to create a wrapper function resembling
-<tt>call_my_srcu()</tt> for each SRCU flavor.
-
-<table>
-<tr><th>&nbsp;</th></tr>
-<tr><th align="left">Quick Quiz:</th></tr>
-<tr><td>
- But what if I need to wait for multiple RCU flavors, but I also need
- the grace periods to be expedited?
-</td></tr>
-<tr><th align="left">Answer:</th></tr>
-<tr><td bgcolor="#ffffff"><font color="ffffff">
- If you are using expedited grace periods, there should be less penalty
- for waiting on them in succession.
- But if that is nevertheless a problem, you can use workqueues
- or multiple kthreads to wait on the various expedited grace
- periods concurrently.
-</font></td></tr>
-<tr><td>&nbsp;</td></tr>
-</table>
-
-<p>
-Again, it is usually better to adjust the RCU read-side critical sections
-to use a single flavor of RCU, but when this is not feasible, you can use
-<tt>synchronize_rcu_mult()</tt>.
+In <tt>CONFIG_PREEMPT=n</tt> kernels, trampolines cannot be preempted,
+so these APIs map to
+<tt>call_rcu()</tt>,
+<tt>synchronize_rcu()</tt>, and
+<tt>rcu_barrier()</tt>, respectively.
+In <tt>CONFIG_PREEMPT=y</tt> kernels, trampolines can be preempted,
+and these three APIs are therefore implemented by separate functions
+that check for voluntary context switches.
<h2><a name="Possible Future Changes">Possible Future Changes</a></h2>
@@ -3238,12 +3179,6 @@ grace-period state machine so as to avoid the need for the additional
latency.
<p>
-Expedited grace periods scan the CPUs, so their latency and overhead
-increases with increasing numbers of CPUs.
-If this becomes a serious problem on large systems, it will be necessary
-to do some redesign to avoid this scalability problem.
-
-<p>
RCU disables CPU hotplug in a few places, perhaps most notably in the
<tt>rcu_barrier()</tt> operations.
If there is a strong reason to use <tt>rcu_barrier()</tt> in CPU-hotplug
@@ -3288,11 +3223,6 @@ require extremely good demonstration of need and full exploration of
alternatives.
<p>
-There is an embarrassingly large number of flavors of RCU, and this
-number has been increasing over time.
-Perhaps it will be possible to combine some at some future date.
-
-<p>
RCU's various kthreads are reasonably recent additions.
It is quite likely that adjustments will be required to more gracefully
handle extreme loads.
diff --git a/Documentation/RCU/rcu.txt b/Documentation/RCU/rcu.txt
index 7d4ae110c2c9..721b3e426515 100644
--- a/Documentation/RCU/rcu.txt
+++ b/Documentation/RCU/rcu.txt
@@ -87,7 +87,3 @@ o Where can I find more information on RCU?
See the RTFP.txt file in this directory.
Or point your browser at http://www.rdrop.com/users/paulmck/RCU/.
-
-o What are all these files in this directory?
-
- See 00-INDEX for the list.
diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt
index f99cf11b314b..491043fd976f 100644
--- a/Documentation/RCU/stallwarn.txt
+++ b/Documentation/RCU/stallwarn.txt
@@ -16,12 +16,9 @@ o A CPU looping in an RCU read-side critical section.
o A CPU looping with interrupts disabled.
-o A CPU looping with preemption disabled. This condition can
- result in RCU-sched stalls and, if ksoftirqd is in use, RCU-bh
- stalls.
+o A CPU looping with preemption disabled.
-o A CPU looping with bottom halves disabled. This condition can
- result in RCU-sched and RCU-bh stalls.
+o A CPU looping with bottom halves disabled.
o For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the kernel
without invoking schedule(). If the looping in the kernel is
@@ -87,9 +84,9 @@ o A hardware failure. This is quite unlikely, but has occurred
This resulted in a series of RCU CPU stall warnings, eventually
leading the realization that the CPU had failed.
-The RCU, RCU-sched, RCU-bh, and RCU-tasks implementations have CPU stall
-warning. Note that SRCU does -not- have CPU stall warnings. Please note
-that RCU only detects CPU stalls when there is a grace period in progress.
+The RCU, RCU-sched, and RCU-tasks implementations have CPU stall warning.
+Note that SRCU does -not- have CPU stall warnings. Please note that
+RCU only detects CPU stalls when there is a grace period in progress.
No grace period, no CPU stall warnings.
To diagnose the cause of the stall, inspect the stack traces.
diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt
index c2a7facf7ff9..86d82f7f3500 100644
--- a/Documentation/RCU/whatisRCU.txt
+++ b/Documentation/RCU/whatisRCU.txt
@@ -934,7 +934,8 @@ c. Do you need to treat NMI handlers, hardirq handlers,
d. Do you need RCU grace periods to complete even in the face
of softirq monopolization of one or more of the CPUs? For
example, is your code subject to network-based denial-of-service
- attacks? If so, you need RCU-bh.
+ attacks? If so, you should disable softirq across your readers,
+ for example, by using rcu_read_lock_bh().
e. Is your workload too update-intensive for normal use of
RCU, but inappropriate for other synchronization mechanisms?
diff --git a/Documentation/accounting/psi.txt b/Documentation/accounting/psi.txt
new file mode 100644
index 000000000000..b8ca28b60215
--- /dev/null
+++ b/Documentation/accounting/psi.txt
@@ -0,0 +1,73 @@
+================================
+PSI - Pressure Stall Information
+================================
+
+:Date: April, 2018
+:Author: Johannes Weiner <hannes@cmpxchg.org>
+
+When CPU, memory or IO devices are contended, workloads experience
+latency spikes, throughput losses, and run the risk of OOM kills.
+
+Without an accurate measure of such contention, users are forced to
+either play it safe and under-utilize their hardware resources, or
+roll the dice and frequently suffer the disruptions resulting from
+excessive overcommit.
+
+The psi feature identifies and quantifies the disruptions caused by
+such resource crunches and the time impact it has on complex workloads
+or even entire systems.
+
+Having an accurate measure of productivity losses caused by resource
+scarcity aids users in sizing workloads to hardware--or provisioning
+hardware according to workload demand.
+
+As psi aggregates this information in realtime, systems can be managed
+dynamically using techniques such as load shedding, migrating jobs to
+other systems or data centers, or strategically pausing or killing low
+priority or restartable batch jobs.
+
+This allows maximizing hardware utilization without sacrificing
+workload health or risking major disruptions such as OOM kills.
+
+Pressure interface
+==================
+
+Pressure information for each resource is exported through the
+respective file in /proc/pressure/ -- cpu, memory, and io.
+
+The format for CPU is as such:
+
+some avg10=0.00 avg60=0.00 avg300=0.00 total=0
+
+and for memory and IO:
+
+some avg10=0.00 avg60=0.00 avg300=0.00 total=0
+full avg10=0.00 avg60=0.00 avg300=0.00 total=0
+
+The "some" line indicates the share of time in which at least some
+tasks are stalled on a given resource.
+
+The "full" line indicates the share of time in which all non-idle
+tasks are stalled on a given resource simultaneously. In this state
+actual CPU cycles are going to waste, and a workload that spends
+extended time in this state is considered to be thrashing. This has
+severe impact on performance, and it's useful to distinguish this
+situation from a state where some tasks are stalled but the CPU is
+still doing productive work. As such, time spent in this subset of the
+stall state is tracked separately and exported in the "full" averages.
+
+The ratios are tracked as recent trends over ten, sixty, and three
+hundred second windows, which gives insight into short term events as
+well as medium and long term trends. The total absolute stall time is
+tracked and exported as well, to allow detection of latency spikes
+which wouldn't necessarily make a dent in the time averages, or to
+average trends over custom time frames.
+
+Cgroup2 interface
+=================
+
+In a system with a CONFIG_CGROUP=y kernel and the cgroup2 filesystem
+mounted, pressure stall information is also tracked for tasks grouped
+into cgroups. Each subdirectory in the cgroupfs mountpoint contains
+cpu.pressure, memory.pressure, and io.pressure files; the format is
+the same as the /proc/pressure/ files.
diff --git a/Documentation/admin-guide/LSM/Yama.rst b/Documentation/admin-guide/LSM/Yama.rst
index 13468ea696b7..d0a060de3973 100644
--- a/Documentation/admin-guide/LSM/Yama.rst
+++ b/Documentation/admin-guide/LSM/Yama.rst
@@ -64,8 +64,8 @@ The sysctl settings (writable only with ``CAP_SYS_PTRACE``) are:
Using ``PTRACE_TRACEME`` is unchanged.
2 - admin-only attach:
- only processes with ``CAP_SYS_PTRACE`` may use ptrace
- with ``PTRACE_ATTACH``, or through children calling ``PTRACE_TRACEME``.
+ only processes with ``CAP_SYS_PTRACE`` may use ptrace, either with
+ ``PTRACE_ATTACH`` or through children calling ``PTRACE_TRACEME``.
3 - no attach:
no processes may use ptrace with ``PTRACE_ATTACH`` nor via
diff --git a/Documentation/admin-guide/README.rst b/Documentation/admin-guide/README.rst
index 15ea785b2dfa..0797eec76be1 100644
--- a/Documentation/admin-guide/README.rst
+++ b/Documentation/admin-guide/README.rst
@@ -51,8 +51,7 @@ Documentation
- There are various README files in the Documentation/ subdirectory:
these typically contain kernel-specific installation notes for some
- drivers for example. See Documentation/00-INDEX for a list of what
- is contained in each file. Please read the
+ drivers for example. Please read the
:ref:`Documentation/process/changes.rst <changes>` file, as it
contains information about the problems, which may result by upgrading
your kernel.
diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst
index 184193bcb262..8384c681a4b2 100644
--- a/Documentation/admin-guide/cgroup-v2.rst
+++ b/Documentation/admin-guide/cgroup-v2.rst
@@ -966,6 +966,12 @@ All time durations are in microseconds.
$PERIOD duration. "max" for $MAX indicates no limit. If only
one number is written, $MAX is updated.
+ cpu.pressure
+ A read-only nested-key file which exists on non-root cgroups.
+
+ Shows pressure stall information for CPU. See
+ Documentation/accounting/psi.txt for details.
+
Memory
------
@@ -1127,6 +1133,10 @@ PAGE_SIZE multiple when read back.
disk readahead. For now OOM in memory cgroup kills
tasks iff shortage has happened inside page fault.
+ This event is not raised if the OOM killer is not
+ considered as an option, e.g. for failed high-order
+ allocations.
+
oom_kill
The number of processes belonging to this cgroup
killed by any kind of OOM killer.
@@ -1271,6 +1281,12 @@ PAGE_SIZE multiple when read back.
higher than the limit for an extended period of time. This
reduces the impact on the workload and memory management.
+ memory.pressure
+ A read-only nested-key file which exists on non-root cgroups.
+
+ Shows pressure stall information for memory. See
+ Documentation/accounting/psi.txt for details.
+
Usage Guidelines
~~~~~~~~~~~~~~~~
@@ -1408,6 +1424,12 @@ IO Interface Files
8:16 rbps=2097152 wbps=max riops=max wiops=max
+ io.pressure
+ A read-only nested-key file which exists on non-root cgroups.
+
+ Shows pressure stall information for IO. See
+ Documentation/accounting/psi.txt for details.
+
Writeback
~~~~~~~~~
@@ -1857,8 +1879,10 @@ following two functions.
wbc_init_bio(@wbc, @bio)
Should be called for each bio carrying writeback data and
- associates the bio with the inode's owner cgroup. Can be
- called anytime between bio allocation and submission.
+ associates the bio with the inode's owner cgroup and the
+ corresponding request queue. This must be called after
+ a queue (device) has been associated with the bio and
+ before submission.
wbc_account_io(@wbc, @page, @bytes)
Should be called for each data segment being written out.
@@ -1877,7 +1901,7 @@ the configuration, the bio may be executed at a lower priority and if
the writeback session is holding shared resources, e.g. a journal
entry, may lead to priority inversion. There is no one easy solution
for the problem. Filesystems can try to work around specific problem
-cases by skipping wbc_init_bio() or using bio_associate_blkcg()
+cases by skipping wbc_init_bio() or using bio_associate_create_blkg()
directly.
diff --git a/Documentation/admin-guide/ext4.rst b/Documentation/admin-guide/ext4.rst
new file mode 100644
index 000000000000..e506d3dae510
--- /dev/null
+++ b/Documentation/admin-guide/ext4.rst
@@ -0,0 +1,574 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+ext4 General Information
+========================
+
+Ext4 is an advanced level of the ext3 filesystem which incorporates
+scalability and reliability enhancements for supporting large filesystems
+(64 bit) in keeping with increasing disk capacities and state-of-the-art
+feature requirements.
+
+Mailing list: linux-ext4@vger.kernel.org
+Web site: http://ext4.wiki.kernel.org
+
+
+Quick usage instructions
+========================
+
+Note: More extensive information for getting started with ext4 can be
+found at the ext4 wiki site at the URL:
+http://ext4.wiki.kernel.org/index.php/Ext4_Howto
+
+ - The latest version of e2fsprogs can be found at:
+
+ https://www.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/
+
+ or
+
+ http://sourceforge.net/project/showfiles.php?group_id=2406
+
+ or grab the latest git repository from:
+
+ https://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git
+
+ - Create a new filesystem using the ext4 filesystem type:
+
+ # mke2fs -t ext4 /dev/hda1
+
+ Or to configure an existing ext3 filesystem to support extents:
+
+ # tune2fs -O extents /dev/hda1
+
+ If the filesystem was created with 128 byte inodes, it can be
+ converted to use 256 byte for greater efficiency via:
+
+ # tune2fs -I 256 /dev/hda1
+
+ - Mounting:
+
+ # mount -t ext4 /dev/hda1 /wherever
+
+ - When comparing performance with other filesystems, it's always
+ important to try multiple workloads; very often a subtle change in a
+ workload parameter can completely change the ranking of which
+ filesystems do well compared to others. When comparing versus ext3,
+ note that ext4 enables write barriers by default, while ext3 does
+ not enable write barriers by default. So it is useful to use
+ explicitly specify whether barriers are enabled or not when via the
+ '-o barriers=[0|1]' mount option for both ext3 and ext4 filesystems
+ for a fair comparison. When tuning ext3 for best benchmark numbers,
+ it is often worthwhile to try changing the data journaling mode; '-o
+ data=writeback' can be faster for some workloads. (Note however that
+ running mounted with data=writeback can potentially leave stale data
+ exposed in recently written files in case of an unclean shutdown,
+ which could be a security exposure in some situations.) Configuring
+ the filesystem with a large journal can also be helpful for
+ metadata-intensive workloads.
+
+Features
+========
+
+Currently Available
+-------------------
+
+* ability to use filesystems > 16TB (e2fsprogs support not available yet)
+* extent format reduces metadata overhead (RAM, IO for access, transactions)
+* extent format more robust in face of on-disk corruption due to magics,
+* internal redundancy in tree
+* improved file allocation (multi-block alloc)
+* lift 32000 subdirectory limit imposed by i_links_count[1]
+* nsec timestamps for mtime, atime, ctime, create time
+* inode version field on disk (NFSv4, Lustre)
+* reduced e2fsck time via uninit_bg feature
+* journal checksumming for robustness, performance
+* persistent file preallocation (e.g for streaming media, databases)
+* ability to pack bitmaps and inode tables into larger virtual groups via the
+ flex_bg feature
+* large file support
+* inode allocation using large virtual block groups via flex_bg
+* delayed allocation
+* large block (up to pagesize) support
+* efficient new ordered mode in JBD2 and ext4 (avoid using buffer head to force
+ the ordering)
+
+[1] Filesystems with a block size of 1k may see a limit imposed by the
+directory hash tree having a maximum depth of two.
+
+Options
+=======
+
+When mounting an ext4 filesystem, the following option are accepted:
+(*) == default
+
+ ro
+ Mount filesystem read only. Note that ext4 will replay the journal (and
+ thus write to the partition) even when mounted "read only". The mount
+ options "ro,noload" can be used to prevent writes to the filesystem.
+
+ journal_checksum
+ Enable checksumming of the journal transactions. This will allow the
+ recovery code in e2fsck and the kernel to detect corruption in the
+ kernel. It is a compatible change and will be ignored by older
+ kernels.
+
+ journal_async_commit
+ Commit block can be written to disk without waiting for descriptor
+ blocks. If enabled older kernels cannot mount the device. This will
+ enable 'journal_checksum' internally.
+
+ journal_path=path, journal_dev=devnum
+ When the external journal device's major/minor numbers have changed,
+ these options allow the user to specify the new journal location. The
+ journal device is identified through either its new major/minor numbers
+ encoded in devnum, or via a path to the device.
+
+ norecovery, noload
+ Don't load the journal on mounting. Note that if the filesystem was
+ not unmounted cleanly, skipping the journal replay will lead to the
+ filesystem containing inconsistencies that can lead to any number of
+ problems.
+
+ data=journal
+ All data are committed into the journal prior to being written into the
+ main file system. Enabling this mode will disable delayed allocation
+ and O_DIRECT support.
+
+ data=ordered (*)
+ All data are forced directly out to the main file system prior to its
+ metadata being committed to the journal.
+
+ data=writeback
+ Data ordering is not preserved, data may be written into the main file
+ system after its metadata has been committed to the journal.
+
+ commit=nrsec (*)
+ Ext4 can be told to sync all its data and metadata every 'nrsec'
+ seconds. The default value is 5 seconds. This means that if you lose
+ your power, you will lose as much as the latest 5 seconds of work (your
+ filesystem will not be damaged though, thanks to the journaling). This
+ default value (or any low value) will hurt performance, but it's good
+ for data-safety. Setting it to 0 will have the same effect as leaving
+ it at the default (5 seconds). Setting it to very large values will
+ improve performance.
+
+ barrier=<0|1(*)>, barrier(*), nobarrier
+ This enables/disables the use of write barriers in the jbd code.
+ barrier=0 disables, barrier=1 enables. This also requires an IO stack
+ which can support barriers, and if jbd gets an error on a barrier
+ write, it will disable again with a warning. Write barriers enforce
+ proper on-disk ordering of journal commits, making volatile disk write
+ caches safe to use, at some performance penalty. If your disks are
+ battery-backed in one way or another, disabling barriers may safely
+ improve performance. The mount options "barrier" and "nobarrier" can
+ also be used to enable or disable barriers, for consistency with other
+ ext4 mount options.
+
+ inode_readahead_blks=n
+ This tuning parameter controls the maximum number of inode table blocks
+ that ext4's inode table readahead algorithm will pre-read into the
+ buffer cache. The default value is 32 blocks.
+
+ nouser_xattr
+ Disables Extended User Attributes. See the attr(5) manual page for
+ more information about extended attributes.
+
+ noacl
+ This option disables POSIX Access Control List support. If ACL support
+ is enabled in the kernel configuration (CONFIG_EXT4_FS_POSIX_ACL), ACL
+ is enabled by default on mount. See the acl(5) manual page for more
+ information about acl.
+
+ bsddf (*)
+ Make 'df' act like BSD.
+
+ minixdf
+ Make 'df' act like Minix.
+
+ debug
+ Extra debugging information is sent to syslog.
+
+ abort
+ Simulate the effects of calling ext4_abort() for debugging purposes.
+ This is normally used while remounting a filesystem which is already
+ mounted.
+
+ errors=remount-ro
+ Remount the filesystem read-only on an error.
+
+ errors=continue
+ Keep going on a filesystem error.
+
+ errors=panic
+ Panic and halt the machine if an error occurs. (These mount options
+ override the errors behavior specified in the superblock, which can be
+ configured using tune2fs)
+
+ data_err=ignore(*)
+ Just print an error message if an error occurs in a file data buffer in
+ ordered mode.
+ data_err=abort
+ Abort the journal if an error occurs in a file data buffer in ordered
+ mode.
+
+ grpid | bsdgroups
+ New objects have the group ID of their parent.
+
+ nogrpid (*) | sysvgroups
+ New objects have the group ID of their creator.
+
+ resgid=n
+ The group ID which may use the reserved blocks.
+
+ resuid=n
+ The user ID which may use the reserved blocks.
+
+ sb=
+ Use alternate superblock at this location.
+
+ quota, noquota, grpquota, usrquota
+ These options are ignored by the filesystem. They are used only by
+ quota tools to recognize volumes where quota should be turned on. See
+ documentation in the quota-tools package for more details
+ (http://sourceforge.net/projects/linuxquota).
+
+ jqfmt=<quota type>, usrjquota=<file>, grpjquota=<file>
+ These options tell filesystem details about quota so that quota
+ information can be properly updated during journal replay. They replace
+ the above quota options. See documentation in the quota-tools package
+ for more details (http://sourceforge.net/projects/linuxquota).
+
+ stripe=n
+ Number of filesystem blocks that mballoc will try to use for allocation
+ size and alignment. For RAID5/6 systems this should be the number of
+ data disks * RAID chunk size in file system blocks.
+
+ delalloc (*)
+ Defer block allocation until just before ext4 writes out the block(s)
+ in question. This allows ext4 to better allocation decisions more
+ efficiently.
+
+ nodelalloc
+ Disable delayed allocation. Blocks are allocated when the data is
+ copied from userspace to the page cache, either via the write(2) system
+ call or when an mmap'ed page which was previously unallocated is
+ written for the first time.
+
+ max_batch_time=usec
+ Maximum amount of time ext4 should wait for additional filesystem
+ operations to be batch together with a synchronous write operation.
+ Since a synchronous write operation is going to force a commit and then
+ a wait for the I/O complete, it doesn't cost much, and can be a huge
+ throughput win, we wait for a small amount of time to see if any other
+ transactions can piggyback on the synchronous write. The algorithm
+ used is designed to automatically tune for the speed of the disk, by
+ measuring the amount of time (on average) that it takes to finish
+ committing a transaction. Call this time the "commit time". If the
+ time that the transaction has been running is less than the commit
+ time, ext4 will try sleeping for the commit time to see if other
+ operations will join the transaction. The commit time is capped by
+ the max_batch_time, which defaults to 15000us (15ms). This
+ optimization can be turned off entirely by setting max_batch_time to 0.
+
+ min_batch_time=usec
+ This parameter sets the commit time (as described above) to be at least
+ min_batch_time. It defaults to zero microseconds. Increasing this
+ parameter may improve the throughput of multi-threaded, synchronous
+ workloads on very fast disks, at the cost of increasing latency.
+
+ journal_ioprio=prio
+ The I/O priority (from 0 to 7, where 0 is the highest priority) which
+ should be used for I/O operations submitted by kjournald2 during a
+ commit operation. This defaults to 3, which is a slightly higher
+ priority than the default I/O priority.
+
+ auto_da_alloc(*), noauto_da_alloc
+ Many broken applications don't use fsync() when replacing existing
+ files via patterns such as fd = open("foo.new")/write(fd,..)/close(fd)/
+ rename("foo.new", "foo"), or worse yet, fd = open("foo",
+ O_TRUNC)/write(fd,..)/close(fd). If auto_da_alloc is enabled, ext4
+ will detect the replace-via-rename and replace-via-truncate patterns
+ and force that any delayed allocation blocks are allocated such that at
+ the next journal commit, in the default data=ordered mode, the data
+ blocks of the new file are forced to disk before the rename() operation
+ is committed. This provides roughly the same level of guarantees as
+ ext3, and avoids the "zero-length" problem that can happen when a
+ system crashes before the delayed allocation blocks are forced to disk.
+
+ noinit_itable
+ Do not initialize any uninitialized inode table blocks in the
+ background. This feature may be used by installation CD's so that the
+ install process can complete as quickly as possible; the inode table
+ initialization process would then be deferred until the next time the
+ file system is unmounted.
+
+ init_itable=n
+ The lazy itable init code will wait n times the number of milliseconds
+ it took to zero out the previous block group's inode table. This
+ minimizes the impact on the system performance while file system's
+ inode table is being initialized.
+
+ discard, nodiscard(*)
+ Controls whether ext4 should issue discard/TRIM commands to the
+ underlying block device when blocks are freed. This is useful for SSD
+ devices and sparse/thinly-provisioned LUNs, but it is off by default
+ until sufficient testing has been done.
+
+ nouid32
+ Disables 32-bit UIDs and GIDs. This is for interoperability with
+ older kernels which only store and expect 16-bit values.
+
+ block_validity(*), noblock_validity
+ These options enable or disable the in-kernel facility for tracking
+ filesystem metadata blocks within internal data structures. This
+ allows multi- block allocator and other routines to notice bugs or
+ corrupted allocation bitmaps which cause blocks to be allocated which
+ overlap with filesystem metadata blocks.
+
+ dioread_lock, dioread_nolock
+ Controls whether or not ext4 should use the DIO read locking. If the
+ dioread_nolock option is specified ext4 will allocate uninitialized
+ extent before buffer write and convert the extent to initialized after
+ IO completes. This approach allows ext4 code to avoid using inode
+ mutex, which improves scalability on high speed storages. However this
+ does not work with data journaling and dioread_nolock option will be
+ ignored with kernel warning. Note that dioread_nolock code path is only
+ used for extent-based files. Because of the restrictions this options
+ comprises it is off by default (e.g. dioread_lock).
+
+ max_dir_size_kb=n
+ This limits the size of directories so that any attempt to expand them
+ beyond the specified limit in kilobytes will cause an ENOSPC error.
+ This is useful in memory constrained environments, where a very large
+ directory can cause severe performance problems or even provoke the Out
+ Of Memory killer. (For example, if there is only 512mb memory
+ available, a 176mb directory may seriously cramp the system's style.)
+
+ i_version
+ Enable 64-bit inode version support. This option is off by default.
+
+ dax
+ Use direct access (no page cache). See
+ Documentation/filesystems/dax.txt. Note that this option is
+ incompatible with data=journal.
+
+Data Mode
+=========
+There are 3 different data modes:
+
+* writeback mode
+
+ In data=writeback mode, ext4 does not journal data at all. This mode provides
+ a similar level of journaling as that of XFS, JFS, and ReiserFS in its default
+ mode - metadata journaling. A crash+recovery can cause incorrect data to
+ appear in files which were written shortly before the crash. This mode will
+ typically provide the best ext4 performance.
+
+* ordered mode
+
+ In data=ordered mode, ext4 only officially journals metadata, but it logically
+ groups metadata information related to data changes with the data blocks into
+ a single unit called a transaction. When it's time to write the new metadata
+ out to disk, the associated data blocks are written first. In general, this
+ mode performs slightly slower than writeback but significantly faster than
+ journal mode.
+
+* journal mode
+
+ data=journal mode provides full data and metadata journaling. All new data is
+ written to the journal first, and then to its final location. In the event of
+ a crash, the journal can be replayed, bringing both data and metadata into a
+ consistent state. This mode is the slowest except when data needs to be read
+ from and written to disk at the same time where it outperforms all others
+ modes. Enabling this mode will disable delayed allocation and O_DIRECT
+ support.
+
+/proc entries
+=============
+
+Information about mounted ext4 file systems can be found in
+/proc/fs/ext4. Each mounted filesystem will have a directory in
+/proc/fs/ext4 based on its device name (i.e., /proc/fs/ext4/hdc or
+/proc/fs/ext4/dm-0). The files in each per-device directory are shown
+in table below.
+
+Files in /proc/fs/ext4/<devname>
+
+ mb_groups
+ details of multiblock allocator buddy cache of free blocks
+
+/sys entries
+============
+
+Information about mounted ext4 file systems can be found in
+/sys/fs/ext4. Each mounted filesystem will have a directory in
+/sys/fs/ext4 based on its device name (i.e., /sys/fs/ext4/hdc or
+/sys/fs/ext4/dm-0). The files in each per-device directory are shown
+in table below.
+
+Files in /sys/fs/ext4/<devname>:
+
+(see also Documentation/ABI/testing/sysfs-fs-ext4)
+
+ delayed_allocation_blocks
+ This file is read-only and shows the number of blocks that are dirty in
+ the page cache, but which do not have their location in the filesystem
+ allocated yet.
+
+ inode_goal
+ Tuning parameter which (if non-zero) controls the goal inode used by
+ the inode allocator in preference to all other allocation heuristics.
+ This is intended for debugging use only, and should be 0 on production
+ systems.
+
+ inode_readahead_blks
+ Tuning parameter which controls the maximum number of inode table
+ blocks that ext4's inode table readahead algorithm will pre-read into
+ the buffer cache.
+
+ lifetime_write_kbytes
+ This file is read-only and shows the number of kilobytes of data that
+ have been written to this filesystem since it was created.
+
+ max_writeback_mb_bump
+ The maximum number of megabytes the writeback code will try to write
+ out before move on to another inode.
+
+ mb_group_prealloc
+ The multiblock allocator will round up allocation requests to a
+ multiple of this tuning parameter if the stripe size is not set in the
+ ext4 superblock
+
+ mb_max_to_scan
+ The maximum number of extents the multiblock allocator will search to
+ find the best extent.
+
+ mb_min_to_scan
+ The minimum number of extents the multiblock allocator will search to
+ find the best extent.
+
+ mb_order2_req
+ Tuning parameter which controls the minimum size for requests (as a
+ power of 2) where the buddy cache is used.
+
+ mb_stats
+ Controls whether the multiblock allocator should collect statistics,
+ which are shown during the unmount. 1 means to collect statistics, 0
+ means not to collect statistics.
+
+ mb_stream_req
+ Files which have fewer blocks than this tunable parameter will have
+ their blocks allocated out of a block group specific preallocation
+ pool, so that small files are packed closely together. Each large file
+ will have its blocks allocated out of its own unique preallocation
+ pool.
+
+ session_write_kbytes
+ This file is read-only and shows the number of kilobytes of data that
+ have been written to this filesystem since it was mounted.
+
+ reserved_clusters
+ This is RW file and contains number of reserved clusters in the file
+ system which will be used in the specific situations to avoid costly
+ zeroout, unexpected ENOSPC, or possible data loss. The default is 2% or
+ 4096 clusters, whichever is smaller and this can be changed however it
+ can never exceed number of clusters in the file system. If there is not
+ enough space for the reserved space when mounting the file mount will
+ _not_ fail.
+
+Ioctls
+======
+
+There is some Ext4 specific functionality which can be accessed by applications
+through the system call interfaces. The list of all Ext4 specific ioctls are
+shown in the table below.
+
+Table of Ext4 specific ioctls
+
+ EXT4_IOC_GETFLAGS
+ Get additional attributes associated with inode. The ioctl argument is
+ an integer bitfield, with bit values described in ext4.h. This ioctl is
+ an alias for FS_IOC_GETFLAGS.
+
+ EXT4_IOC_SETFLAGS
+ Set additional attributes associated with inode. The ioctl argument is
+ an integer bitfield, with bit values described in ext4.h. This ioctl is
+ an alias for FS_IOC_SETFLAGS.
+
+ EXT4_IOC_GETVERSION, EXT4_IOC_GETVERSION_OLD
+ Get the inode i_generation number stored for each inode. The
+ i_generation number is normally changed only when new inode is created
+ and it is particularly useful for network filesystems. The '_OLD'
+ version of this ioctl is an alias for FS_IOC_GETVERSION.
+
+ EXT4_IOC_SETVERSION, EXT4_IOC_SETVERSION_OLD
+ Set the inode i_generation number stored for each inode. The '_OLD'
+ version of this ioctl is an alias for FS_IOC_SETVERSION.
+
+ EXT4_IOC_GROUP_EXTEND
+ This ioctl has the same purpose as the resize mount option. It allows
+ to resize filesystem to the end of the last existing block group,
+ further resize has to be done with resize2fs, either online, or
+ offline. The argument points to the unsigned logn number representing
+ the filesystem new block count.
+
+ EXT4_IOC_MOVE_EXT
+ Move the block extents from orig_fd (the one this ioctl is pointing to)
+ to the donor_fd (the one specified in move_extent structure passed as
+ an argument to this ioctl). Then, exchange inode metadata between
+ orig_fd and donor_fd. This is especially useful for online
+ defragmentation, because the allocator has the opportunity to allocate
+ moved blocks better, ideally into one contiguous extent.
+
+ EXT4_IOC_GROUP_ADD
+ Add a new group descriptor to an existing or new group descriptor
+ block. The new group descriptor is described by ext4_new_group_input
+ structure, which is passed as an argument to this ioctl. This is
+ especially useful in conjunction with EXT4_IOC_GROUP_EXTEND, which
+ allows online resize of the filesystem to the end of the last existing
+ block group. Those two ioctls combined is used in userspace online
+ resize tool (e.g. resize2fs).
+
+ EXT4_IOC_MIGRATE
+ This ioctl operates on the filesystem itself. It converts (migrates)
+ ext3 indirect block mapped inode to ext4 extent mapped inode by walking
+ through indirect block mapping of the original inode and converting
+ contiguous block ranges into ext4 extents of the temporary inode. Then,
+ inodes are swapped. This ioctl might help, when migrating from ext3 to
+ ext4 filesystem, however suggestion is to create fresh ext4 filesystem
+ and copy data from the backup. Note, that filesystem has to support
+ extents for this ioctl to work.
+
+ EXT4_IOC_ALLOC_DA_BLKS
+ Force all of the delay allocated blocks to be allocated to preserve
+ application-expected ext3 behaviour. Note that this will also start
+ triggering a write of the data blocks, but this behaviour may change in
+ the future as it is not necessary and has been done this way only for
+ sake of simplicity.
+
+ EXT4_IOC_RESIZE_FS
+ Resize the filesystem to a new size. The number of blocks of resized
+ filesystem is passed in via 64 bit integer argument. The kernel
+ allocates bitmaps and inode table, the userspace tool thus just passes
+ the new number of blocks.
+
+ EXT4_IOC_SWAP_BOOT
+ Swap i_blocks and associated attributes (like i_blocks, i_size,
+ i_flags, ...) from the specified inode with inode EXT4_BOOT_LOADER_INO
+ (#5). This is typically used to store a boot loader in a secure part of
+ the filesystem, where it can't be changed by a normal user by accident.
+ The data blocks of the previous boot loader will be associated with the
+ given inode.
+
+References
+==========
+
+kernel source: <file:fs/ext4/>
+ <file:fs/jbd2/>
+
+programs: http://e2fsprogs.sourceforge.net/
+
+useful links: http://fedoraproject.org/wiki/ext3-devel
+ http://www.bullopensource.org/ext4/
+ http://ext4.wiki.kernel.org/index.php/Main_Page
+ http://fedoraproject.org/wiki/Features/Ext4
diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst
index 0873685bab0f..965745d5fb9a 100644
--- a/Documentation/admin-guide/index.rst
+++ b/Documentation/admin-guide/index.rst
@@ -71,6 +71,7 @@ configure specific aspects of kernel behavior to your liking.
java
ras
bcache
+ ext4
pm/index
thunderbolt
LSM/index
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 92eb1f42240d..b90fe3b6bc6c 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -856,6 +856,11 @@
causing system reset or hang due to sending
INIT from AP to BSP.
+ disable_counter_freezing [HW]
+ Disable Intel PMU counter freezing feature.
+ The feature only exists starting from
+ Arch Perfmon v4 (Skylake and newer).
+
disable_ddw [PPC/PSERIES]
Disable Dynamic DMA Window support. Use this if
to workaround buggy firmware.
@@ -1385,6 +1390,11 @@
hvc_iucv_allow= [S390] Comma-separated list of z/VM user IDs.
If specified, z/VM IUCV HVC accepts connections
from listed z/VM user IDs only.
+
+ hv_nopvspin [X86,HYPER_V] Disables the paravirt spinlock optimizations
+ which allow the hypervisor to 'idle' the
+ guest on lock contention.
+
keep_bootcon [KNL]
Do not unregister boot console at start. This is only
useful for debugging when something happens in the window
@@ -1749,12 +1759,24 @@
nobypass [PPC/POWERNV]
Disable IOMMU bypass, using IOMMU for PCI devices.
+ iommu.strict= [ARM64] Configure TLB invalidation behaviour
+ Format: { "0" | "1" }
+ 0 - Lazy mode.
+ Request that DMA unmap operations use deferred
+ invalidation of hardware TLBs, for increased
+ throughput at the cost of reduced device isolation.
+ Will fall back to strict mode if not supported by
+ the relevant IOMMU driver.
+ 1 - Strict mode (default).
+ DMA unmap operations invalidate IOMMU hardware TLBs
+ synchronously.
+
iommu.passthrough=
[ARM64] Configure DMA to bypass the IOMMU by default.
Format: { "0" | "1" }
0 - Use IOMMU translation for DMA.
1 - Bypass the IOMMU for DMA.
- unset - Use IOMMU translation for DMA.
+ unset - Use value of CONFIG_IOMMU_DEFAULT_PASSTHROUGH.
io7= [HW] IO7 for Marvel based alpha systems
See comment before marvel_specify_io7 in
@@ -2274,6 +2296,8 @@
ltpc= [NET]
Format: <io>,<irq>,<dma>
+ lsm.debug [SECURITY] Enable LSM initialization debugging output.
+
machvec= [IA-64] Force the use of a particular machine-vector
(machvec) in a generic kernel.
Example: machvec=hpzx1_swiotlb
@@ -2404,7 +2428,7 @@
seconds. Use this parameter to check at some
other rate. 0 disables periodic checking.
- memtest= [KNL,X86,ARM] Enable memtest
+ memtest= [KNL,X86,ARM,PPC] Enable memtest
Format: <integer>
default : 0 <disable>
Specifies the number of memtest passes to be
@@ -3540,14 +3564,14 @@
In kernels built with CONFIG_RCU_NOCB_CPU=y, set
the specified list of CPUs to be no-callback CPUs.
- Invocation of these CPUs' RCU callbacks will
- be offloaded to "rcuox/N" kthreads created for
- that purpose, where "x" is "b" for RCU-bh, "p"
- for RCU-preempt, and "s" for RCU-sched, and "N"
- is the CPU number. This reduces OS jitter on the
- offloaded CPUs, which can be useful for HPC and
- real-time workloads. It can also improve energy
- efficiency for asymmetric multiprocessors.
+ Invocation of these CPUs' RCU callbacks will be
+ offloaded to "rcuox/N" kthreads created for that
+ purpose, where "x" is "p" for RCU-preempt, and
+ "s" for RCU-sched, and "N" is the CPU number.
+ This reduces OS jitter on the offloaded CPUs,
+ which can be useful for HPC and real-time
+ workloads. It can also improve energy efficiency
+ for asymmetric multiprocessors.
rcu_nocb_poll [KNL]
Rather than requiring that offloaded CPUs
@@ -3601,7 +3625,14 @@
Set required age in jiffies for a
given grace period before RCU starts
soliciting quiescent-state help from
- rcu_note_context_switch().
+ rcu_note_context_switch(). If not specified, the
+ kernel will calculate a value based on the most
+ recent settings of rcutree.jiffies_till_first_fqs
+ and rcutree.jiffies_till_next_fqs.
+ This calculated value may be viewed in
+ rcutree.jiffies_to_sched_qs. Any attempt to
+ set rcutree.jiffies_to_sched_qs will be
+ cheerfully overwritten.
rcutree.jiffies_till_first_fqs= [KNL]
Set delay from grace-period initialization to
@@ -3869,12 +3900,6 @@
rcupdate.rcu_self_test= [KNL]
Run the RCU early boot self tests
- rcupdate.rcu_self_test_bh= [KNL]
- Run the RCU bh early boot self tests
-
- rcupdate.rcu_self_test_sched= [KNL]
- Run the RCU sched early boot self tests
-
rdinit= [KNL]
Format: <full_path>
Run specified binary instead of /init from the ramdisk,
@@ -4610,7 +4635,8 @@
usbcore.old_scheme_first=
[USB] Start with the old device initialization
- scheme (default 0 = off).
+ scheme, applies only to low and full-speed devices
+ (default 0 = off).
usbcore.usbfs_memory_mb=
[USB] Memory limit (in MB) for buffers allocated by
@@ -4825,6 +4851,18 @@
This is actually a boot loader parameter; the value is
passed to the kernel using a special protocol.
+ vm_debug[=options] [KNL] Available with CONFIG_DEBUG_VM=y.
+ May slow down system boot speed, especially when
+ enabled on systems with a large amount of memory.
+ All options are enabled by default, and this
+ interface is meant to allow for selectively
+ enabling or disabling specific virtual memory
+ debugging features.
+
+ Available options are:
+ P Enable page structure init time poisoning
+ - Disable all of the above options
+
vmalloc=nn[KMG] [KNL,BOOT] Forces the vmalloc area to have an exact
size of <nn>. This can be used to increase the
minimum size (128MB on x86). It can also be used to
diff --git a/Documentation/admin-guide/l1tf.rst b/Documentation/admin-guide/l1tf.rst
index bae52b845de0..b85dd80510b0 100644
--- a/Documentation/admin-guide/l1tf.rst
+++ b/Documentation/admin-guide/l1tf.rst
@@ -553,7 +553,7 @@ When nested virtualization is in use, three operating systems are involved:
the bare metal hypervisor, the nested hypervisor and the nested virtual
machine. VMENTER operations from the nested hypervisor into the nested
guest will always be processed by the bare metal hypervisor. If KVM is the
-bare metal hypervisor it wiil:
+bare metal hypervisor it will:
- Flush the L1D cache on every switch from the nested hypervisor to the
nested virtual machine, so that the nested hypervisor's secrets are not
diff --git a/Documentation/admin-guide/mm/index.rst b/Documentation/admin-guide/mm/index.rst
index ceead68c2df7..8edb35f11317 100644
--- a/Documentation/admin-guide/mm/index.rst
+++ b/Documentation/admin-guide/mm/index.rst
@@ -29,6 +29,7 @@ the Linux memory management.
hugetlbpage
idle_page_tracking
ksm
+ memory-hotplug
numa_memory_policy
pagemap
soft-dirty
diff --git a/Documentation/memory-hotplug.txt b/Documentation/admin-guide/mm/memory-hotplug.rst
index 7f49ebf3ddb2..5c4432c96c4b 100644
--- a/Documentation/memory-hotplug.txt
+++ b/Documentation/admin-guide/mm/memory-hotplug.rst
@@ -1,47 +1,29 @@
+.. _admin_guide_memory_hotplug:
+
==============
Memory Hotplug
==============
:Created: Jul 28 2007
-:Updated: Add description of notifier of memory hotplug: Oct 11 2007
+:Updated: Add some details about locking internals: Aug 20 2018
This document is about memory hotplug including how-to-use and current status.
Because Memory Hotplug is still under development, contents of this text will
be changed often.
-.. CONTENTS
-
- 1. Introduction
- 1.1 purpose of memory hotplug
- 1.2. Phases of memory hotplug
- 1.3. Unit of Memory online/offline operation
- 2. Kernel Configuration
- 3. sysfs files for memory hotplug
- 4. Physical memory hot-add phase
- 4.1 Hardware(Firmware) Support
- 4.2 Notify memory hot-add event by hand
- 5. Logical Memory hot-add phase
- 5.1. State of memory
- 5.2. How to online memory
- 6. Logical memory remove
- 6.1 Memory offline and ZONE_MOVABLE
- 6.2. How to offline memory
- 7. Physical memory remove
- 8. Memory hotplug event notifier
- 9. Future Work List
-
+.. contents:: :local:
.. note::
(1) x86_64's has special implementation for memory hotplug.
This text does not describe it.
- (2) This text assumes that sysfs is mounted at /sys.
+ (2) This text assumes that sysfs is mounted at ``/sys``.
Introduction
============
-purpose of memory hotplug
+Purpose of memory hotplug
-------------------------
Memory Hotplug allows users to increase/decrease the amount of memory.
@@ -57,7 +39,6 @@ hardware which supports memory power management.
Linux memory hotplug is designed for both purpose.
-
Phases of memory hotplug
------------------------
@@ -92,7 +73,6 @@ phase by hand.
(However, if you writes udev's hotplug scripts for memory hotplug, these
phases can be execute in seamless way.)
-
Unit of Memory online/offline operation
---------------------------------------
@@ -107,10 +87,9 @@ unit upon which memory online/offline operations are to be performed. The
default size of a memory block is the same as memory section size unless an
architecture specifies otherwise. (see :ref:`memory_hotplug_sysfs_files`.)
-To determine the size (in bytes) of a memory block please read this file:
-
-/sys/devices/system/memory/block_size_bytes
+To determine the size (in bytes) of a memory block please read this file::
+ /sys/devices/system/memory/block_size_bytes
Kernel Configuration
====================
@@ -119,22 +98,22 @@ To use memory hotplug feature, kernel must be compiled with following
config options.
- For all memory hotplug:
- - Memory model -> Sparse Memory (CONFIG_SPARSEMEM)
- - Allow for memory hot-add (CONFIG_MEMORY_HOTPLUG)
+ - Memory model -> Sparse Memory (``CONFIG_SPARSEMEM``)
+ - Allow for memory hot-add (``CONFIG_MEMORY_HOTPLUG``)
- To enable memory removal, the following are also necessary:
- - Allow for memory hot remove (CONFIG_MEMORY_HOTREMOVE)
- - Page Migration (CONFIG_MIGRATION)
+ - Allow for memory hot remove (``CONFIG_MEMORY_HOTREMOVE``)
+ - Page Migration (``CONFIG_MIGRATION``)
- For ACPI memory hotplug, the following are also necessary:
- - Memory hotplug (under ACPI Support menu) (CONFIG_ACPI_HOTPLUG_MEMORY)
+ - Memory hotplug (under ACPI Support menu) (``CONFIG_ACPI_HOTPLUG_MEMORY``)
- This option can be kernel module.
- As a related configuration, if your box has a feature of NUMA-node hotplug
via ACPI, then this option is necessary too.
- ACPI0004,PNP0A05 and PNP0A06 Container Driver (under ACPI Support menu)
- (CONFIG_ACPI_CONTAINER).
+ (``CONFIG_ACPI_CONTAINER``).
This option can be kernel module too.
@@ -145,10 +124,11 @@ sysfs files for memory hotplug
==============================
All memory blocks have their device information in sysfs. Each memory block
-is described under /sys/devices/system/memory as:
+is described under ``/sys/devices/system/memory`` as::
/sys/devices/system/memory/memoryXXX
- (XXX is the memory block id.)
+
+where XXX is the memory block id.
For the memory block covered by the sysfs directory. It is expected that all
memory sections in this range are present and no memory holes exist in the
@@ -157,7 +137,7 @@ the existence of one should not affect the hotplug capabilities of the memory
block.
For example, assume 1GiB memory block size. A device for a memory starting at
-0x100000000 is /sys/device/system/memory/memory4::
+0x100000000 is ``/sys/device/system/memory/memory4``::
(0x100000000 / 1Gib = 4)
@@ -165,11 +145,11 @@ This device covers address range [0x100000000 ... 0x140000000)
Under each memory block, you can see 5 files:
-- /sys/devices/system/memory/memoryXXX/phys_index
-- /sys/devices/system/memory/memoryXXX/phys_device
-- /sys/devices/system/memory/memoryXXX/state
-- /sys/devices/system/memory/memoryXXX/removable
-- /sys/devices/system/memory/memoryXXX/valid_zones
+- ``/sys/devices/system/memory/memoryXXX/phys_index``
+- ``/sys/devices/system/memory/memoryXXX/phys_device``
+- ``/sys/devices/system/memory/memoryXXX/state``
+- ``/sys/devices/system/memory/memoryXXX/removable``
+- ``/sys/devices/system/memory/memoryXXX/valid_zones``
=================== ============================================================
``phys_index`` read-only and contains memory block id, same as XXX.
@@ -207,13 +187,15 @@ Under each memory block, you can see 5 files:
These directories/files appear after physical memory hotplug phase.
If CONFIG_NUMA is enabled the memoryXXX/ directories can also be accessed
-via symbolic links located in the /sys/devices/system/node/node* directories.
+via symbolic links located in the ``/sys/devices/system/node/node*`` directories.
+
+For example::
-For example:
-/sys/devices/system/node/node0/memory9 -> ../../memory/memory9
+ /sys/devices/system/node/node0/memory9 -> ../../memory/memory9
-A backlink will also be created:
-/sys/devices/system/memory/memory9/node0 -> ../../node/node0
+A backlink will also be created::
+
+ /sys/devices/system/memory/memory9/node0 -> ../../node/node0
.. _memory_hotplug_physical_mem:
@@ -240,7 +222,6 @@ If firmware supports NUMA-node hotplug, and defines an object _HID "ACPI0004",
calls hotplug code for all of objects which are defined in it.
If memory device is found, memory hotplug code will be called.
-
Notify memory hot-add event by hand
-----------------------------------
@@ -251,8 +232,9 @@ CONFIG_ARCH_MEMORY_PROBE and can be configured on powerpc, sh, and x86
if hotplug is supported, although for x86 this should be handled by ACPI
notification.
-Probe interface is located at
-/sys/devices/system/memory/probe
+Probe interface is located at::
+
+ /sys/devices/system/memory/probe
You can tell the physical address of new memory to the kernel by::
@@ -263,7 +245,6 @@ memory_block_size] memory range is hot-added. In this case, hotplug script is
not called (in current implementation). You'll have to online memory by
yourself. Please see :ref:`memory_hotplug_how_to_online_memory`.
-
Logical Memory hot-add phase
============================
@@ -301,7 +282,7 @@ This sets a global policy and impacts all memory blocks that will subsequently
be hotplugged. Currently offline blocks keep their state. It is possible, under
certain circumstances, that some memory blocks will be added but will fail to
online. User space tools can check their "state" files
-(/sys/devices/system/memory/memoryXXX/state) and try to online them manually.
+(``/sys/devices/system/memory/memoryXXX/state``) and try to online them manually.
If the automatic onlining wasn't requested, failed, or some memory block was
offlined it is possible to change the individual block's state by writing to the
@@ -334,8 +315,6 @@ available memory will be increased.
This may be changed in future.
-
-
Logical memory remove
=====================
@@ -413,87 +392,45 @@ Need more implementation yet....
- Notification completion of remove works by OS to firmware.
- Guard from remove if not yet.
-Memory hotplug event notifier
-=============================
-
-Hotplugging events are sent to a notification queue.
-
-There are six types of notification defined in include/linux/memory.h:
-
-MEM_GOING_ONLINE
- Generated before new memory becomes available in order to be able to
- prepare subsystems to handle memory. The page allocator is still unable
- to allocate from the new memory.
-
-MEM_CANCEL_ONLINE
- Generated if MEMORY_GOING_ONLINE fails.
-
-MEM_ONLINE
- Generated when memory has successfully brought online. The callback may
- allocate pages from the new memory.
-
-MEM_GOING_OFFLINE
- Generated to begin the process of offlining memory. Allocations are no
- longer possible from the memory but some of the memory to be offlined
- is still in use. The callback can be used to free memory known to a
- subsystem from the indicated memory block.
-
-MEM_CANCEL_OFFLINE
- Generated if MEMORY_GOING_OFFLINE fails. Memory is available again from
- the memory block that we attempted to offline.
-
-MEM_OFFLINE
- Generated after offlining memory is complete.
-
-A callback routine can be registered by calling::
-
- hotplug_memory_notifier(callback_func, priority)
-
-Callback functions with higher values of priority are called before callback
-functions with lower values.
-A callback function must have the following prototype::
+Locking Internals
+=================
- int callback_func(
- struct notifier_block *self, unsigned long action, void *arg);
+When adding/removing memory that uses memory block devices (i.e. ordinary RAM),
+the device_hotplug_lock should be held to:
-The first argument of the callback function (self) is a pointer to the block
-of the notifier chain that points to the callback function itself.
-The second argument (action) is one of the event types described above.
-The third argument (arg) passes a pointer of struct memory_notify::
+- synchronize against online/offline requests (e.g. via sysfs). This way, memory
+ block devices can only be accessed (.online/.state attributes) by user
+ space once memory has been fully added. And when removing memory, we
+ know nobody is in critical sections.
+- synchronize against CPU hotplug and similar (e.g. relevant for ACPI and PPC)
- struct memory_notify {
- unsigned long start_pfn;
- unsigned long nr_pages;
- int status_change_nid_normal;
- int status_change_nid_high;
- int status_change_nid;
- }
+Especially, there is a possible lock inversion that is avoided using
+device_hotplug_lock when adding memory and user space tries to online that
+memory faster than expected:
-- start_pfn is start_pfn of online/offline memory.
-- nr_pages is # of pages of online/offline memory.
-- status_change_nid_normal is set node id when N_NORMAL_MEMORY of nodemask
- is (will be) set/clear, if this is -1, then nodemask status is not changed.
-- status_change_nid_high is set node id when N_HIGH_MEMORY of nodemask
- is (will be) set/clear, if this is -1, then nodemask status is not changed.
-- status_change_nid is set node id when N_MEMORY of nodemask is (will be)
- set/clear. It means a new(memoryless) node gets new memory by online and a
- node loses all memory. If this is -1, then nodemask status is not changed.
+- device_online() will first take the device_lock(), followed by
+ mem_hotplug_lock
+- add_memory_resource() will first take the mem_hotplug_lock, followed by
+ the device_lock() (while creating the devices, during bus_add_device()).
- If status_changed_nid* >= 0, callback should create/discard structures for the
- node if necessary.
+As the device is visible to user space before taking the device_lock(), this
+can result in a lock inversion.
-The callback routine shall return one of the values
-NOTIFY_DONE, NOTIFY_OK, NOTIFY_BAD, NOTIFY_STOP
-defined in include/linux/notifier.h
+onlining/offlining of memory should be done via device_online()/
+device_offline() - to make sure it is properly synchronized to actions
+via sysfs. Holding device_hotplug_lock is advised (to e.g. protect online_type)
-NOTIFY_DONE and NOTIFY_OK have no effect on the further processing.
+When adding/removing/onlining/offlining memory or adding/removing
+heterogeneous/device memory, we should always hold the mem_hotplug_lock in
+write mode to serialise memory hotplug (e.g. access to global/zone
+variables).
-NOTIFY_BAD is used as response to the MEM_GOING_ONLINE, MEM_GOING_OFFLINE,
-MEM_ONLINE, or MEM_OFFLINE action to cancel hotplugging. It stops
-further processing of the notification queue.
+In addition, mem_hotplug_lock (in contrast to device_hotplug_lock) in read
+mode allows for a quite efficient get_online_mems/put_online_mems
+implementation, so code accessing memory can protect from that memory
+vanishing.
-NOTIFY_STOP stops further processing of the notification queue.
Future Work
===========
diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst
index 8f1d3de449b5..ac6f5c597a56 100644
--- a/Documentation/admin-guide/pm/intel_pstate.rst
+++ b/Documentation/admin-guide/pm/intel_pstate.rst
@@ -465,6 +465,13 @@ Next, the following policy attributes have special meaning if
policy for the time interval between the last two invocations of the
driver's utilization update callback by the CPU scheduler for that CPU.
+One more policy attribute is present if the `HWP feature is enabled in the
+processor <Active Mode With HWP_>`_:
+
+``base_frequency``
+ Shows the base frequency of the CPU. Any frequency above this will be
+ in the turbo frequency range.
+
The meaning of these attributes in the `passive mode <Passive Mode_>`_ is the
same as for other scaling drivers.
diff --git a/Documentation/admin-guide/security-bugs.rst b/Documentation/admin-guide/security-bugs.rst
index 30491d91e93d..164bf71149fd 100644
--- a/Documentation/admin-guide/security-bugs.rst
+++ b/Documentation/admin-guide/security-bugs.rst
@@ -26,23 +26,34 @@ information is helpful. Any exploit code is very helpful and will not
be released without consent from the reporter unless it has already been
made public.
-Disclosure
-----------
-
-The goal of the Linux kernel security team is to work with the bug
-submitter to understand and fix the bug. We prefer to publish the fix as
-soon as possible, but try to avoid public discussion of the bug itself
-and leave that to others.
-
-Publishing the fix may be delayed when the bug or the fix is not yet
-fully understood, the solution is not well-tested or for vendor
-coordination. However, we expect these delays to be short, measurable in
-days, not weeks or months. A release date is negotiated by the security
-team working with the bug submitter as well as vendors. However, the
-kernel security team holds the final say when setting a timeframe. The
-timeframe varies from immediate (esp. if it's already publicly known bug)
-to a few weeks. As a basic default policy, we expect report date to
-release date to be on the order of 7 days.
+Disclosure and embargoed information
+------------------------------------
+
+The security list is not a disclosure channel. For that, see Coordination
+below.
+
+Once a robust fix has been developed, our preference is to release the
+fix in a timely fashion, treating it no differently than any of the other
+thousands of changes and fixes the Linux kernel project releases every
+month.
+
+However, at the request of the reporter, we will postpone releasing the
+fix for up to 5 business days after the date of the report or after the
+embargo has lifted; whichever comes first. The only exception to that
+rule is if the bug is publicly known, in which case the preference is to
+release the fix as soon as it's available.
+
+Whilst embargoed information may be shared with trusted individuals in
+order to develop a fix, such information will not be published alongside
+the fix or on any other disclosure channel without the permission of the
+reporter. This includes but is not limited to the original bug report
+and followup discussions (if any), exploits, CVE information or the
+identity of the reporter.
+
+In other words our only interest is in getting bugs fixed. All other
+information submitted to the security list and any followup discussions
+of the report are treated confidentially even after the embargo has been
+lifted, in perpetuity.
Coordination
------------
@@ -68,7 +79,7 @@ may delay the bug handling. If a reporter wishes to have a CVE identifier
assigned ahead of public disclosure, they will need to contact the private
linux-distros list, described above. When such a CVE identifier is known
before a patch is provided, it is desirable to mention it in the commit
-message, though.
+message if the reporter agrees.
Non-disclosure agreements
-------------------------
diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX
deleted file mode 100644
index b6e69fd371c4..000000000000
--- a/Documentation/arm/00-INDEX
+++ /dev/null
@@ -1,50 +0,0 @@
-00-INDEX
- - this file
-Booting
- - requirements for booting
-CCN.txt
- - Cache Coherent Network ring-bus and perf PMU driver.
-Interrupts
- - ARM Interrupt subsystem documentation
-IXP4xx
- - Intel IXP4xx Network processor.
-Netwinder
- - Netwinder specific documentation
-Porting
- - Symbol definitions for porting Linux to a new ARM machine.
-Setup
- - Kernel initialization parameters on ARM Linux
-README
- - General ARM documentation
-SA1100/
- - SA1100 documentation
-Samsung-S3C24XX/
- - S3C24XX ARM Linux Overview
-SPEAr/
- - ST SPEAr platform Linux Overview
-VFP/
- - Release notes for Linux Kernel Vector Floating Point support code
-cluster-pm-race-avoidance.txt
- - Algorithm for CPU and Cluster setup/teardown
-empeg/
- - Ltd's Empeg MP3 Car Audio Player
-firmware.txt
- - Secure firmware registration and calling.
-kernel_mode_neon.txt
- - How to use NEON instructions in kernel mode
-kernel_user_helpers.txt
- - Helper functions in kernel space made available for userspace.
-mem_alignment
- - alignment abort handler documentation
-memory.txt
- - description of the virtual memory layout
-nwfpe/
- - NWFPE floating point emulator documentation
-swp_emulation
- - SWP/SWPB emulation handler/logging description
-tcm.txt
- - ARM Tightly Coupled Memory
-uefi.txt
- - [U]EFI configuration and runtime services documentation
-vlocks.txt
- - Voting locks, low-level mechanism relying on memory system atomic writes.
diff --git a/Documentation/arm/Samsung/Bootloader-interface.txt b/Documentation/arm/Samsung/Bootloader-interface.txt
index ed494ac0beb2..d17ed518a7ea 100644
--- a/Documentation/arm/Samsung/Bootloader-interface.txt
+++ b/Documentation/arm/Samsung/Bootloader-interface.txt
@@ -26,6 +26,7 @@ Offset Value Purpose
0x20 0xfcba0d10 (Magic cookie) AFTR
0x24 exynos_cpu_resume_ns AFTR
0x28 + 4*cpu 0x8 (Magic cookie, Exynos3250) AFTR
+0x28 0x0 or last value during resume (Exynos542x) System suspend
2. Secure mode
diff --git a/Documentation/arm64/elf_hwcaps.txt b/Documentation/arm64/elf_hwcaps.txt
index d6aff2c5e9e2..ea819ae024dd 100644
--- a/Documentation/arm64/elf_hwcaps.txt
+++ b/Documentation/arm64/elf_hwcaps.txt
@@ -78,11 +78,11 @@ HWCAP_EVTSTRM
HWCAP_AES
- Functionality implied by ID_AA64ISAR1_EL1.AES == 0b0001.
+ Functionality implied by ID_AA64ISAR0_EL1.AES == 0b0001.
HWCAP_PMULL
- Functionality implied by ID_AA64ISAR1_EL1.AES == 0b0010.
+ Functionality implied by ID_AA64ISAR0_EL1.AES == 0b0010.
HWCAP_SHA1
@@ -153,7 +153,7 @@ HWCAP_ASIMDDP
HWCAP_SHA512
- Functionality implied by ID_AA64ISAR0_EL1.SHA2 == 0b0002.
+ Functionality implied by ID_AA64ISAR0_EL1.SHA2 == 0b0010.
HWCAP_SVE
@@ -173,8 +173,12 @@ HWCAP_USCAT
HWCAP_ILRCPC
- Functionality implied by ID_AA64ISR1_EL1.LRCPC == 0b0002.
+ Functionality implied by ID_AA64ISAR1_EL1.LRCPC == 0b0010.
HWCAP_FLAGM
Functionality implied by ID_AA64ISAR0_EL1.TS == 0b0001.
+
+HWCAP_SSBS
+
+ Functionality implied by ID_AA64PFR1_EL1.SSBS == 0b0010.
diff --git a/Documentation/arm64/hugetlbpage.txt b/Documentation/arm64/hugetlbpage.txt
new file mode 100644
index 000000000000..cfae87dc653b
--- /dev/null
+++ b/Documentation/arm64/hugetlbpage.txt
@@ -0,0 +1,38 @@
+HugeTLBpage on ARM64
+====================
+
+Hugepage relies on making efficient use of TLBs to improve performance of
+address translations. The benefit depends on both -
+
+ - the size of hugepages
+ - size of entries supported by the TLBs
+
+The ARM64 port supports two flavours of hugepages.
+
+1) Block mappings at the pud/pmd level
+--------------------------------------
+
+These are regular hugepages where a pmd or a pud page table entry points to a
+block of memory. Regardless of the supported size of entries in TLB, block
+mappings reduce the depth of page table walk needed to translate hugepage
+addresses.
+
+2) Using the Contiguous bit
+---------------------------
+
+The architecture provides a contiguous bit in the translation table entries
+(D4.5.3, ARM DDI 0487C.a) that hints to the MMU to indicate that it is one of a
+contiguous set of entries that can be cached in a single TLB entry.
+
+The contiguous bit is used in Linux to increase the mapping size at the pmd and
+pte (last) level. The number of supported contiguous entries varies by page size
+and level of the page table.
+
+
+The following hugepage sizes are supported -
+
+ CONT PTE PMD CONT PMD PUD
+ -------- --- -------- ---
+ 4K: 64K 2M 32M 1G
+ 16K: 2M 32M 1G
+ 64K: 2M 512M 16G
diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt
index 3b2f2dd82225..76ccded8b74c 100644
--- a/Documentation/arm64/silicon-errata.txt
+++ b/Documentation/arm64/silicon-errata.txt
@@ -56,6 +56,7 @@ stable kernels.
| ARM | Cortex-A72 | #853709 | N/A |
| ARM | Cortex-A73 | #858921 | ARM64_ERRATUM_858921 |
| ARM | Cortex-A55 | #1024718 | ARM64_ERRATUM_1024718 |
+| ARM | Cortex-A76 | #1188873 | ARM64_ERRATUM_1188873 |
| ARM | MMU-500 | #841119,#826419 | N/A |
| | | | |
| Cavium | ThunderX ITS | #22375, #24313 | CAVIUM_ERRATUM_22375 |
diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX
deleted file mode 100644
index 8d55b4bbb5e2..000000000000
--- a/Documentation/block/00-INDEX
+++ /dev/null
@@ -1,34 +0,0 @@
-00-INDEX
- - This file
-bfq-iosched.txt
- - BFQ IO scheduler and its tunables
-biodoc.txt
- - Notes on the Generic Block Layer Rewrite in Linux 2.5
-biovecs.txt
- - Immutable biovecs and biovec iterators
-capability.txt
- - Generic Block Device Capability (/sys/block/<device>/capability)
-cfq-iosched.txt
- - CFQ IO scheduler tunables
-cmdline-partition.txt
- - how to specify block device partitions on kernel command line
-data-integrity.txt
- - Block data integrity
-deadline-iosched.txt
- - Deadline IO scheduler tunables
-ioprio.txt
- - Block io priorities (in CFQ scheduler)
-pr.txt
- - Block layer support for Persistent Reservations
-null_blk.txt
- - Null block for block-layer benchmarking.
-queue-sysfs.txt
- - Queue's sysfs entries
-request.txt
- - The members of struct request (in include/linux/blkdev.h)
-stat.txt
- - Block layer statistics in /sys/block/<device>/stat
-switching-sched.txt
- - Switching I/O schedulers at runtime
-writeback_cache_control.txt
- - Control of volatile write back caches
diff --git a/Documentation/blockdev/00-INDEX b/Documentation/blockdev/00-INDEX
deleted file mode 100644
index c08df56dd91b..000000000000
--- a/Documentation/blockdev/00-INDEX
+++ /dev/null
@@ -1,18 +0,0 @@
-00-INDEX
- - this file
-README.DAC960
- - info on Mylex DAC960/DAC1100 PCI RAID Controller Driver for Linux.
-cciss.txt
- - info, major/minor #'s for Compaq's SMART Array Controllers.
-cpqarray.txt
- - info on using Compaq's SMART2 Intelligent Disk Array Controllers.
-floppy.txt
- - notes and driver options for the floppy disk driver.
-mflash.txt
- - info on mGine m(g)flash driver for linux.
-nbd.txt
- - info on a TCP implementation of a network block device.
-paride.txt
- - information about the parallel port IDE subsystem.
-ramdisk.txt
- - short guide on how to set up and use the RAM disk.
diff --git a/Documentation/blockdev/README.DAC960 b/Documentation/blockdev/README.DAC960
deleted file mode 100644
index bd85fb9dc6e5..000000000000
--- a/Documentation/blockdev/README.DAC960
+++ /dev/null
@@ -1,756 +0,0 @@
- Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
-
- Version 2.2.11 for Linux 2.2.19
- Version 2.4.11 for Linux 2.4.12
-
- PRODUCTION RELEASE
-
- 11 October 2001
-
- Leonard N. Zubkoff
- Dandelion Digital
- lnz@dandelion.com
-
- Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
-
-
- INTRODUCTION
-
-Mylex, Inc. designs and manufactures a variety of high performance PCI RAID
-controllers. Mylex Corporation is located at 34551 Ardenwood Blvd., Fremont,
-California 94555, USA and can be reached at 510.796.6100 or on the World Wide
-Web at http://www.mylex.com. Mylex Technical Support can be reached by
-electronic mail at mylexsup@us.ibm.com, by voice at 510.608.2400, or by FAX at
-510.745.7715. Contact information for offices in Europe and Japan is available
-on their Web site.
-
-The latest information on Linux support for DAC960 PCI RAID Controllers, as
-well as the most recent release of this driver, will always be available from
-my Linux Home Page at URL "http://www.dandelion.com/Linux/". The Linux DAC960
-driver supports all current Mylex PCI RAID controllers including the new
-eXtremeRAID 2000/3000 and AcceleRAID 352/170/160 models which have an entirely
-new firmware interface from the older eXtremeRAID 1100, AcceleRAID 150/200/250,
-and DAC960PJ/PG/PU/PD/PL. See below for a complete controller list as well as
-minimum firmware version requirements. For simplicity, in most places this
-documentation refers to DAC960 generically rather than explicitly listing all
-the supported models.
-
-Driver bug reports should be sent via electronic mail to "lnz@dandelion.com".
-Please include with the bug report the complete configuration messages reported
-by the driver at startup, along with any subsequent system messages relevant to
-the controller's operation, and a detailed description of your system's
-hardware configuration. Driver bugs are actually quite rare; if you encounter
-problems with disks being marked offline, for example, please contact Mylex
-Technical Support as the problem is related to the hardware configuration
-rather than the Linux driver.
-
-Please consult the RAID controller documentation for detailed information
-regarding installation and configuration of the controllers. This document
-primarily provides information specific to the Linux support.
-
-
- DRIVER FEATURES
-
-The DAC960 RAID controllers are supported solely as high performance RAID
-controllers, not as interfaces to arbitrary SCSI devices. The Linux DAC960
-driver operates at the block device level, the same level as the SCSI and IDE
-drivers. Unlike other RAID controllers currently supported on Linux, the
-DAC960 driver is not dependent on the SCSI subsystem, and hence avoids all the
-complexity and unnecessary code that would be associated with an implementation
-as a SCSI driver. The DAC960 driver is designed for as high a performance as
-possible with no compromises or extra code for compatibility with lower
-performance devices. The DAC960 driver includes extensive error logging and
-online configuration management capabilities. Except for initial configuration
-of the controller and adding new disk drives, most everything can be handled
-from Linux while the system is operational.
-
-The DAC960 driver is architected to support up to 8 controllers per system.
-Each DAC960 parallel SCSI controller can support up to 15 disk drives per
-channel, for a maximum of 60 drives on a four channel controller; the fibre
-channel eXtremeRAID 3000 controller supports up to 125 disk drives per loop for
-a total of 250 drives. The drives installed on a controller are divided into
-one or more "Drive Groups", and then each Drive Group is subdivided further
-into 1 to 32 "Logical Drives". Each Logical Drive has a specific RAID Level
-and caching policy associated with it, and it appears to Linux as a single
-block device. Logical Drives are further subdivided into up to 7 partitions
-through the normal Linux and PC disk partitioning schemes. Logical Drives are
-also known as "System Drives", and Drive Groups are also called "Packs". Both
-terms are in use in the Mylex documentation; I have chosen to standardize on
-the more generic "Logical Drive" and "Drive Group".
-
-DAC960 RAID disk devices are named in the style of the obsolete Device File
-System (DEVFS). The device corresponding to Logical Drive D on Controller C
-is referred to as /dev/rd/cCdD, and the partitions are called /dev/rd/cCdDp1
-through /dev/rd/cCdDp7. For example, partition 3 of Logical Drive 5 on
-Controller 2 is referred to as /dev/rd/c2d5p3. Note that unlike with SCSI
-disks the device names will not change in the event of a disk drive failure.
-The DAC960 driver is assigned major numbers 48 - 55 with one major number per
-controller. The 8 bits of minor number are divided into 5 bits for the Logical
-Drive and 3 bits for the partition.
-
-
- SUPPORTED DAC960/AcceleRAID/eXtremeRAID PCI RAID CONTROLLERS
-
-The following list comprises the supported DAC960, AcceleRAID, and eXtremeRAID
-PCI RAID Controllers as of the date of this document. It is recommended that
-anyone purchasing a Mylex PCI RAID Controller not in the following table
-contact the author beforehand to verify that it is or will be supported.
-
-eXtremeRAID 3000
- 1 Wide Ultra-2/LVD SCSI channel
- 2 External Fibre FC-AL channels
- 233MHz StrongARM SA 110 Processor
- 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
- 32MB/64MB ECC SDRAM Memory
-
-eXtremeRAID 2000
- 4 Wide Ultra-160 LVD SCSI channels
- 233MHz StrongARM SA 110 Processor
- 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
- 32MB/64MB ECC SDRAM Memory
-
-AcceleRAID 352
- 2 Wide Ultra-160 LVD SCSI channels
- 100MHz Intel i960RN RISC Processor
- 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
- 32MB/64MB ECC SDRAM Memory
-
-AcceleRAID 170
- 1 Wide Ultra-160 LVD SCSI channel
- 100MHz Intel i960RM RISC Processor
- 16MB/32MB/64MB ECC SDRAM Memory
-
-AcceleRAID 160 (AcceleRAID 170LP)
- 1 Wide Ultra-160 LVD SCSI channel
- 100MHz Intel i960RS RISC Processor
- Built in 16M ECC SDRAM Memory
- PCI Low Profile Form Factor - fit for 2U height
-
-eXtremeRAID 1100 (DAC1164P)
- 3 Wide Ultra-2/LVD SCSI channels
- 233MHz StrongARM SA 110 Processor
- 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
- 16MB/32MB/64MB Parity SDRAM Memory with Battery Backup
-
-AcceleRAID 250 (DAC960PTL1)
- Uses onboard Symbios SCSI chips on certain motherboards
- Also includes one onboard Wide Ultra-2/LVD SCSI Channel
- 66MHz Intel i960RD RISC Processor
- 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
-
-AcceleRAID 200 (DAC960PTL0)
- Uses onboard Symbios SCSI chips on certain motherboards
- Includes no onboard SCSI Channels
- 66MHz Intel i960RD RISC Processor
- 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
-
-AcceleRAID 150 (DAC960PRL)
- Uses onboard Symbios SCSI chips on certain motherboards
- Also includes one onboard Wide Ultra-2/LVD SCSI Channel
- 33MHz Intel i960RP RISC Processor
- 4MB Parity EDO Memory
-
-DAC960PJ 1/2/3 Wide Ultra SCSI-3 Channels
- 66MHz Intel i960RD RISC Processor
- 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
-
-DAC960PG 1/2/3 Wide Ultra SCSI-3 Channels
- 33MHz Intel i960RP RISC Processor
- 4MB/8MB ECC EDO Memory
-
-DAC960PU 1/2/3 Wide Ultra SCSI-3 Channels
- Intel i960CF RISC Processor
- 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory
-
-DAC960PD 1/2/3 Wide Fast SCSI-2 Channels
- Intel i960CF RISC Processor
- 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory
-
-DAC960PL 1/2/3 Wide Fast SCSI-2 Channels
- Intel i960 RISC Processor
- 2MB/4MB/8MB/16MB/32MB DRAM Memory
-
-DAC960P 1/2/3 Wide Fast SCSI-2 Channels
- Intel i960 RISC Processor
- 2MB/4MB/8MB/16MB/32MB DRAM Memory
-
-For the eXtremeRAID 2000/3000 and AcceleRAID 352/170/160, firmware version
-6.00-01 or above is required.
-
-For the eXtremeRAID 1100, firmware version 5.06-0-52 or above is required.
-
-For the AcceleRAID 250, 200, and 150, firmware version 4.06-0-57 or above is
-required.
-
-For the DAC960PJ and DAC960PG, firmware version 4.06-0-00 or above is required.
-
-For the DAC960PU, DAC960PD, DAC960PL, and DAC960P, either firmware version
-3.51-0-04 or above is required (for dual Flash ROM controllers), or firmware
-version 2.73-0-00 or above is required (for single Flash ROM controllers)
-
-Please note that not all SCSI disk drives are suitable for use with DAC960
-controllers, and only particular firmware versions of any given model may
-actually function correctly. Similarly, not all motherboards have a BIOS that
-properly initializes the AcceleRAID 250, AcceleRAID 200, AcceleRAID 150,
-DAC960PJ, and DAC960PG because the Intel i960RD/RP is a multi-function device.
-If in doubt, contact Mylex RAID Technical Support (mylexsup@us.ibm.com) to
-verify compatibility. Mylex makes available a hard disk compatibility list at
-http://www.mylex.com/support/hdcomp/hd-lists.html.
-
-
- DRIVER INSTALLATION
-
-This distribution was prepared for Linux kernel version 2.2.19 or 2.4.12.
-
-To install the DAC960 RAID driver, you may use the following commands,
-replacing "/usr/src" with wherever you keep your Linux kernel source tree:
-
- cd /usr/src
- tar -xvzf DAC960-2.2.11.tar.gz (or DAC960-2.4.11.tar.gz)
- mv README.DAC960 linux/Documentation
- mv DAC960.[ch] linux/drivers/block
- patch -p0 < DAC960.patch (if DAC960.patch is included)
- cd linux
- make config
- make bzImage (or zImage)
-
-Then install "arch/x86/boot/bzImage" or "arch/x86/boot/zImage" as your
-standard kernel, run lilo if appropriate, and reboot.
-
-To create the necessary devices in /dev, the "make_rd" script included in
-"DAC960-Utilities.tar.gz" from http://www.dandelion.com/Linux/ may be used.
-LILO 21 and FDISK v2.9 include DAC960 support; also included in this archive
-are patches to LILO 20 and FDISK v2.8 that add DAC960 support, along with
-statically linked executables of LILO and FDISK. This modified version of LILO
-will allow booting from a DAC960 controller and/or mounting the root file
-system from a DAC960.
-
-Red Hat Linux 6.0 and SuSE Linux 6.1 include support for Mylex PCI RAID
-controllers. Installing directly onto a DAC960 may be problematic from other
-Linux distributions until their installation utilities are updated.
-
-
- INSTALLATION NOTES
-
-Before installing Linux or adding DAC960 logical drives to an existing Linux
-system, the controller must first be configured to provide one or more logical
-drives using the BIOS Configuration Utility or DACCF. Please note that since
-there are only at most 6 usable partitions on each logical drive, systems
-requiring more partitions should subdivide a drive group into multiple logical
-drives, each of which can have up to 6 usable partitions. Also, note that with
-large disk arrays it is advisable to enable the 8GB BIOS Geometry (255/63)
-rather than accepting the default 2GB BIOS Geometry (128/32); failing to so do
-will cause the logical drive geometry to have more than 65535 cylinders which
-will make it impossible for FDISK to be used properly. The 8GB BIOS Geometry
-can be enabled by configuring the DAC960 BIOS, which is accessible via Alt-M
-during the BIOS initialization sequence.
-
-For maximum performance and the most efficient E2FSCK performance, it is
-recommended that EXT2 file systems be built with a 4KB block size and 16 block
-stride to match the DAC960 controller's 64KB default stripe size. The command
-"mke2fs -b 4096 -R stride=16 <device>" is appropriate. Unless there will be a
-large number of small files on the file systems, it is also beneficial to add
-the "-i 16384" option to increase the bytes per inode parameter thereby
-reducing the file system metadata. Finally, on systems that will only be run
-with Linux 2.2 or later kernels it is beneficial to enable sparse superblocks
-with the "-s 1" option.
-
-
- DAC960 ANNOUNCEMENTS MAILING LIST
-
-The DAC960 Announcements Mailing List provides a forum for informing Linux
-users of new driver releases and other announcements regarding Linux support
-for DAC960 PCI RAID Controllers. To join the mailing list, send a message to
-"dac960-announce-request@dandelion.com" with the line "subscribe" in the
-message body.
-
-
- CONTROLLER CONFIGURATION AND STATUS MONITORING
-
-The DAC960 RAID controllers running firmware 4.06 or above include a Background
-Initialization facility so that system downtime is minimized both for initial
-installation and subsequent configuration of additional storage. The BIOS
-Configuration Utility (accessible via Alt-R during the BIOS initialization
-sequence) is used to quickly configure the controller, and then the logical
-drives that have been created are available for immediate use even while they
-are still being initialized by the controller. The primary need for online
-configuration and status monitoring is then to avoid system downtime when disk
-drives fail and must be replaced. Mylex's online monitoring and configuration
-utilities are being ported to Linux and will become available at some point in
-the future. Note that with a SAF-TE (SCSI Accessed Fault-Tolerant Enclosure)
-enclosure, the controller is able to rebuild failed drives automatically as
-soon as a drive replacement is made available.
-
-The primary interfaces for controller configuration and status monitoring are
-special files created in the /proc/rd/... hierarchy along with the normal
-system console logging mechanism. Whenever the system is operating, the DAC960
-driver queries each controller for status information every 10 seconds, and
-checks for additional conditions every 60 seconds. The initial status of each
-controller is always available for controller N in /proc/rd/cN/initial_status,
-and the current status as of the last status monitoring query is available in
-/proc/rd/cN/current_status. In addition, status changes are also logged by the
-driver to the system console and will appear in the log files maintained by
-syslog. The progress of asynchronous rebuild or consistency check operations
-is also available in /proc/rd/cN/current_status, and progress messages are
-logged to the system console at most every 60 seconds.
-
-Starting with the 2.2.3/2.0.3 versions of the driver, the status information
-available in /proc/rd/cN/initial_status and /proc/rd/cN/current_status has been
-augmented to include the vendor, model, revision, and serial number (if
-available) for each physical device found connected to the controller:
-
-***** DAC960 RAID Driver Version 2.2.3 of 19 August 1999 *****
-Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
-Configuring Mylex DAC960PRL PCI RAID Controller
- Firmware Version: 4.07-0-07, Channels: 1, Memory Size: 16MB
- PCI Bus: 1, Device: 4, Function: 1, I/O Address: Unassigned
- PCI Address: 0xFE300000 mapped at 0xA0800000, IRQ Channel: 21
- Controller Queue Depth: 128, Maximum Blocks per Command: 128
- Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
- Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
- SAF-TE Enclosure Management Enabled
- Physical Devices:
- 0:0 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 68016775HA
- Disk Status: Online, 17928192 blocks
- 0:1 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 68004E53HA
- Disk Status: Online, 17928192 blocks
- 0:2 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 13013935HA
- Disk Status: Online, 17928192 blocks
- 0:3 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 13016897HA
- Disk Status: Online, 17928192 blocks
- 0:4 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 68019905HA
- Disk Status: Online, 17928192 blocks
- 0:5 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 68012753HA
- Disk Status: Online, 17928192 blocks
- 0:6 Vendor: ESG-SHV Model: SCA HSBP M6 Revision: 0.61
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 89640960 blocks, Write Thru
- No Rebuild or Consistency Check in Progress
-
-To simplify the monitoring process for custom software, the special file
-/proc/rd/status returns "OK" when all DAC960 controllers in the system are
-operating normally and no failures have occurred, or "ALERT" if any logical
-drives are offline or critical or any non-standby physical drives are dead.
-
-Configuration commands for controller N are available via the special file
-/proc/rd/cN/user_command. A human readable command can be written to this
-special file to initiate a configuration operation, and the results of the
-operation can then be read back from the special file in addition to being
-logged to the system console. The shell command sequence
-
- echo "<configuration-command>" > /proc/rd/c0/user_command
- cat /proc/rd/c0/user_command
-
-is typically used to execute configuration commands. The configuration
-commands are:
-
- flush-cache
-
- The "flush-cache" command flushes the controller's cache. The system
- automatically flushes the cache at shutdown or if the driver module is
- unloaded, so this command is only needed to be certain a write back cache
- is flushed to disk before the system is powered off by a command to a UPS.
- Note that the flush-cache command also stops an asynchronous rebuild or
- consistency check, so it should not be used except when the system is being
- halted.
-
- kill <channel>:<target-id>
-
- The "kill" command marks the physical drive <channel>:<target-id> as DEAD.
- This command is provided primarily for testing, and should not be used
- during normal system operation.
-
- make-online <channel>:<target-id>
-
- The "make-online" command changes the physical drive <channel>:<target-id>
- from status DEAD to status ONLINE. In cases where multiple physical drives
- have been killed simultaneously, this command may be used to bring all but
- one of them back online, after which a rebuild to the final drive is
- necessary.
-
- Warning: make-online should only be used on a dead physical drive that is
- an active part of a drive group, never on a standby drive. The command
- should never be used on a dead drive that is part of a critical logical
- drive; rebuild should be used if only a single drive is dead.
-
- make-standby <channel>:<target-id>
-
- The "make-standby" command changes physical drive <channel>:<target-id>
- from status DEAD to status STANDBY. It should only be used in cases where
- a dead drive was replaced after an automatic rebuild was performed onto a
- standby drive. It cannot be used to add a standby drive to the controller
- configuration if one was not created initially; the BIOS Configuration
- Utility must be used for that currently.
-
- rebuild <channel>:<target-id>
-
- The "rebuild" command initiates an asynchronous rebuild onto physical drive
- <channel>:<target-id>. It should only be used when a dead drive has been
- replaced.
-
- check-consistency <logical-drive-number>
-
- The "check-consistency" command initiates an asynchronous consistency check
- of <logical-drive-number> with automatic restoration. It can be used
- whenever it is desired to verify the consistency of the redundancy
- information.
-
- cancel-rebuild
- cancel-consistency-check
-
- The "cancel-rebuild" and "cancel-consistency-check" commands cancel any
- rebuild or consistency check operations previously initiated.
-
-
- EXAMPLE I - DRIVE FAILURE WITHOUT A STANDBY DRIVE
-
-The following annotated logs demonstrate the controller configuration and and
-online status monitoring capabilities of the Linux DAC960 Driver. The test
-configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a
-DAC960PJ controller. The physical drives are configured into a single drive
-group without a standby drive, and the drive group has been configured into two
-logical drives, one RAID-5 and one RAID-6. Note that these logs are from an
-earlier version of the driver and the messages have changed somewhat with newer
-releases, but the functionality remains similar. First, here is the current
-status of the RAID configuration:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
-***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
-Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
-Configuring Mylex DAC960PJ PCI RAID Controller
- Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
- PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
- PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
- Controller Queue Depth: 128, Maximum Blocks per Command: 128
- Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
- Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru
- No Rebuild or Consistency Check in Progress
-
-gwynedd:/u/lnz# cat /proc/rd/status
-OK
-
-The above messages indicate that everything is healthy, and /proc/rd/status
-returns "OK" indicating that there are no problems with any DAC960 controller
-in the system. For demonstration purposes, while I/O is active Physical Drive
-1:1 is now disconnected, simulating a drive failure. The failure is noted by
-the driver within 10 seconds of the controller's having detected it, and the
-driver logs the following console status messages indicating that Logical
-Drives 0 and 1 are now CRITICAL as a result of Physical Drive 1:1 being DEAD:
-
-DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
-DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
-DAC960#0: Physical Drive 1:1 killed because of timeout on SCSI command
-DAC960#0: Physical Drive 1:1 is now DEAD
-DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL
-DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL
-
-The Sense Keys logged here are just Check Condition / Unit Attention conditions
-arising from a SCSI bus reset that is forced by the controller during its error
-recovery procedures. Concurrently with the above, the driver status available
-from /proc/rd also reflects the drive failure. The status message in
-/proc/rd/status has changed from "OK" to "ALERT":
-
-gwynedd:/u/lnz# cat /proc/rd/status
-ALERT
-
-and /proc/rd/c0/current_status has been updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Dead, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
- No Rebuild or Consistency Check in Progress
-
-Since there are no standby drives configured, the system can continue to access
-the logical drives in a performance degraded mode until the failed drive is
-replaced and a rebuild operation completed to restore the redundancy of the
-logical drives. Once Physical Drive 1:1 is replaced with a properly
-functioning drive, or if the physical drive was killed without having failed
-(e.g., due to electrical problems on the SCSI bus), the user can instruct the
-controller to initiate a rebuild operation onto the newly replaced drive:
-
-gwynedd:/u/lnz# echo "rebuild 1:1" > /proc/rd/c0/user_command
-gwynedd:/u/lnz# cat /proc/rd/c0/user_command
-Rebuild of Physical Drive 1:1 Initiated
-
-The echo command instructs the controller to initiate an asynchronous rebuild
-operation onto Physical Drive 1:1, and the status message that results from the
-operation is then available for reading from /proc/rd/c0/user_command, as well
-as being logged to the console by the driver.
-
-Within 10 seconds of this command the driver logs the initiation of the
-asynchronous rebuild operation:
-
-DAC960#0: Rebuild of Physical Drive 1:1 Initiated
-DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01
-DAC960#0: Physical Drive 1:1 is now WRITE-ONLY
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 1% completed
-
-and /proc/rd/c0/current_status is updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Write-Only, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
- Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 6% completed
-
-As the rebuild progresses, the current status in /proc/rd/c0/current_status is
-updated every 10 seconds:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Write-Only, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
- Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 15% completed
-
-and every minute a progress message is logged to the console by the driver:
-
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 32% completed
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 63% completed
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 94% completed
-DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 94% completed
-
-Finally, the rebuild completes successfully. The driver logs the status of the
-logical and physical drives and the rebuild completion:
-
-DAC960#0: Rebuild Completed Successfully
-DAC960#0: Physical Drive 1:1 is now ONLINE
-DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE
-DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE
-
-/proc/rd/c0/current_status is updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru
- Rebuild Completed Successfully
-
-and /proc/rd/status indicates that everything is healthy once again:
-
-gwynedd:/u/lnz# cat /proc/rd/status
-OK
-
-
- EXAMPLE II - DRIVE FAILURE WITH A STANDBY DRIVE
-
-The following annotated logs demonstrate the controller configuration and and
-online status monitoring capabilities of the Linux DAC960 Driver. The test
-configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a
-DAC960PJ controller. The physical drives are configured into a single drive
-group with a standby drive, and the drive group has been configured into two
-logical drives, one RAID-5 and one RAID-6. Note that these logs are from an
-earlier version of the driver and the messages have changed somewhat with newer
-releases, but the functionality remains similar. First, here is the current
-status of the RAID configuration:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
-***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
-Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
-Configuring Mylex DAC960PJ PCI RAID Controller
- Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
- PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
- PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
- Controller Queue Depth: 128, Maximum Blocks per Command: 128
- Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
- Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Standby, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
- No Rebuild or Consistency Check in Progress
-
-gwynedd:/u/lnz# cat /proc/rd/status
-OK
-
-The above messages indicate that everything is healthy, and /proc/rd/status
-returns "OK" indicating that there are no problems with any DAC960 controller
-in the system. For demonstration purposes, while I/O is active Physical Drive
-1:2 is now disconnected, simulating a drive failure. The failure is noted by
-the driver within 10 seconds of the controller's having detected it, and the
-driver logs the following console status messages:
-
-DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
-DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
-DAC960#0: Physical Drive 1:2 killed because of timeout on SCSI command
-DAC960#0: Physical Drive 1:2 is now DEAD
-DAC960#0: Physical Drive 1:2 killed because it was removed
-DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL
-DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL
-
-Since a standby drive is configured, the controller automatically begins
-rebuilding onto the standby drive:
-
-DAC960#0: Physical Drive 1:3 is now WRITE-ONLY
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed
-
-Concurrently with the above, the driver status available from /proc/rd also
-reflects the drive failure and automatic rebuild. The status message in
-/proc/rd/status has changed from "OK" to "ALERT":
-
-gwynedd:/u/lnz# cat /proc/rd/status
-ALERT
-
-and /proc/rd/c0/current_status has been updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Dead, 2201600 blocks
- 1:3 - Disk: Write-Only, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru
- Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed
-
-As the rebuild progresses, the current status in /proc/rd/c0/current_status is
-updated every 10 seconds:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Dead, 2201600 blocks
- 1:3 - Disk: Write-Only, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru
- Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed
-
-and every minute a progress message is logged on the console by the driver:
-
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 76% completed
-DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 66% completed
-DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 84% completed
-
-Finally, the rebuild completes successfully. The driver logs the status of the
-logical and physical drives and the rebuild completion:
-
-DAC960#0: Rebuild Completed Successfully
-DAC960#0: Physical Drive 1:3 is now ONLINE
-DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE
-DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE
-
-/proc/rd/c0/current_status is updated:
-
-***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
-Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
-Configuring Mylex DAC960PJ PCI RAID Controller
- Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
- PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
- PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
- Controller Queue Depth: 128, Maximum Blocks per Command: 128
- Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
- Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Dead, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
- Rebuild Completed Successfully
-
-and /proc/rd/status indicates that everything is healthy once again:
-
-gwynedd:/u/lnz# cat /proc/rd/status
-OK
-
-Note that the absence of a viable standby drive does not create an "ALERT"
-status. Once dead Physical Drive 1:2 has been replaced, the controller must be
-told that this has occurred and that the newly replaced drive should become the
-new standby drive:
-
-gwynedd:/u/lnz# echo "make-standby 1:2" > /proc/rd/c0/user_command
-gwynedd:/u/lnz# cat /proc/rd/c0/user_command
-Make Standby of Physical Drive 1:2 Succeeded
-
-The echo command instructs the controller to make Physical Drive 1:2 into a
-standby drive, and the status message that results from the operation is then
-available for reading from /proc/rd/c0/user_command, as well as being logged to
-the console by the driver. Within 60 seconds of this command the driver logs:
-
-DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01
-DAC960#0: Physical Drive 1:2 is now STANDBY
-DAC960#0: Make Standby of Physical Drive 1:2 Succeeded
-
-and /proc/rd/c0/current_status is updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Standby, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
- Rebuild Completed Successfully
diff --git a/Documentation/blockdev/zram.txt b/Documentation/blockdev/zram.txt
index 875b2b56b87f..3c1b5ab54bc0 100644
--- a/Documentation/blockdev/zram.txt
+++ b/Documentation/blockdev/zram.txt
@@ -190,7 +190,7 @@ whitespace:
notify_free Depending on device usage scenario it may account
a) the number of pages freed because of swap slot free
notifications or b) the number of pages freed because of
- REQ_DISCARD requests sent by bio. The former ones are
+ REQ_OP_DISCARD requests sent by bio. The former ones are
sent to a swap block device when a swap slot is freed,
which implies that this disk is being used as a swap disk.
The latter ones are sent by filesystem mounted with
diff --git a/Documentation/cdrom/00-INDEX b/Documentation/cdrom/00-INDEX
deleted file mode 100644
index 433edf23dc49..000000000000
--- a/Documentation/cdrom/00-INDEX
+++ /dev/null
@@ -1,11 +0,0 @@
-00-INDEX
- - this file (info on CD-ROMs and Linux)
-Makefile
- - only used to generate TeX output from the documentation.
-cdrom-standard.tex
- - LaTeX document on standardizing the CD-ROM programming interface.
-ide-cd
- - info on setting up and using ATAPI (aka IDE) CD-ROMs.
-packet-writing.txt
- - Info on the CDRW packet writing module
-
diff --git a/Documentation/cgroup-v1/00-INDEX b/Documentation/cgroup-v1/00-INDEX
deleted file mode 100644
index 13e0c85e7b35..000000000000
--- a/Documentation/cgroup-v1/00-INDEX
+++ /dev/null
@@ -1,26 +0,0 @@
-00-INDEX
- - this file
-blkio-controller.txt
- - Description for Block IO Controller, implementation and usage details.
-cgroups.txt
- - Control Groups definition, implementation details, examples and API.
-cpuacct.txt
- - CPU Accounting Controller; account CPU usage for groups of tasks.
-cpusets.txt
- - documents the cpusets feature; assign CPUs and Mem to a set of tasks.
-admin-guide/devices.rst
- - Device Whitelist Controller; description, interface and security.
-freezer-subsystem.txt
- - checkpointing; rationale to not use signals, interface.
-hugetlb.txt
- - HugeTLB Controller implementation and usage details.
-memcg_test.txt
- - Memory Resource Controller; implementation details.
-memory.txt
- - Memory Resource Controller; design, accounting, interface, testing.
-net_cls.txt
- - Network classifier cgroups details and usages.
-net_prio.txt
- - Network priority cgroups details and usages.
-pids.txt
- - Process number cgroups details and usages.
diff --git a/Documentation/cgroup-v1/rdma.txt b/Documentation/cgroup-v1/rdma.txt
index af618171e0eb..9bdb7fd03f83 100644
--- a/Documentation/cgroup-v1/rdma.txt
+++ b/Documentation/cgroup-v1/rdma.txt
@@ -27,7 +27,7 @@ cgroup.
Currently user space applications can easily take away all the rdma verb
specific resources such as AH, CQ, QP, MR etc. Due to which other applications
in other cgroup or kernel space ULPs may not even get chance to allocate any
-rdma resources. This can leads to service unavailability.
+rdma resources. This can lead to service unavailability.
Therefore RDMA controller is needed through which resource consumption
of processes can be limited. Through this controller different rdma
diff --git a/Documentation/conf.py b/Documentation/conf.py
index b691af4831fa..72647a38b5c2 100644
--- a/Documentation/conf.py
+++ b/Documentation/conf.py
@@ -259,7 +259,7 @@ latex_elements = {
'papersize': 'a4paper',
# The font size ('10pt', '11pt' or '12pt').
-'pointsize': '8pt',
+'pointsize': '11pt',
# Latex figure (float) alignment
#'figure_align': 'htbp',
@@ -272,8 +272,8 @@ latex_elements = {
'preamble': '''
% Use some font with UTF-8 support with XeLaTeX
\\usepackage{fontspec}
- \\setsansfont{DejaVu Serif}
- \\setromanfont{DejaVu Sans}
+ \\setsansfont{DejaVu Sans}
+ \\setromanfont{DejaVu Serif}
\\setmonofont{DejaVu Sans Mono}
'''
@@ -383,6 +383,10 @@ latex_documents = [
'The kernel development community', 'manual'),
('filesystems/index', 'filesystems.tex', 'Linux Filesystems API',
'The kernel development community', 'manual'),
+ ('admin-guide/ext4', 'ext4-admin-guide.tex', 'ext4 Administration Guide',
+ 'ext4 Community', 'manual'),
+ ('filesystems/ext4/index', 'ext4-data-structures.tex',
+ 'ext4 Data Structures and Algorithms', 'ext4 Community', 'manual'),
('gpu/index', 'gpu.tex', 'Linux GPU Driver Developer\'s Guide',
'The kernel development community', 'manual'),
('input/index', 'linux-input.tex', 'The Linux input driver subsystem',
diff --git a/Documentation/core-api/boot-time-mm.rst b/Documentation/core-api/boot-time-mm.rst
index 03cb1643f46f..e5ec9f1a563d 100644
--- a/Documentation/core-api/boot-time-mm.rst
+++ b/Documentation/core-api/boot-time-mm.rst
@@ -5,54 +5,23 @@ Boot time memory management
Early system initialization cannot use "normal" memory management
simply because it is not set up yet. But there is still need to
allocate memory for various data structures, for instance for the
-physical page allocator. To address this, a specialized allocator
-called the :ref:`Boot Memory Allocator <bootmem>`, or bootmem, was
-introduced. Several years later PowerPC developers added a "Logical
-Memory Blocks" allocator, which was later adopted by other
-architectures and renamed to :ref:`memblock <memblock>`. There is also
-a compatibility layer called `nobootmem` that translates bootmem
-allocation interfaces to memblock calls.
+physical page allocator.
-The selection of the early allocator is done using
-``CONFIG_NO_BOOTMEM`` and ``CONFIG_HAVE_MEMBLOCK`` kernel
-configuration options. These options are enabled or disabled
-statically by the architectures' Kconfig files.
-
-* Architectures that rely only on bootmem select
- ``CONFIG_NO_BOOTMEM=n && CONFIG_HAVE_MEMBLOCK=n``.
-* The users of memblock with the nobootmem compatibility layer set
- ``CONFIG_NO_BOOTMEM=y && CONFIG_HAVE_MEMBLOCK=y``.
-* And for those that use both memblock and bootmem the configuration
- includes ``CONFIG_NO_BOOTMEM=n && CONFIG_HAVE_MEMBLOCK=y``.
-
-Whichever allocator is used, it is the responsibility of the
-architecture specific initialization to set it up in
-:c:func:`setup_arch` and tear it down in :c:func:`mem_init` functions.
+A specialized allocator called ``memblock`` performs the
+boot time memory management. The architecture specific initialization
+must set it up in :c:func:`setup_arch` and tear it down in
+:c:func:`mem_init` functions.
Once the early memory management is available it offers a variety of
functions and macros for memory allocations. The allocation request
may be directed to the first (and probably the only) node or to a
particular node in a NUMA system. There are API variants that panic
-when an allocation fails and those that don't. And more recent and
-advanced memblock even allows controlling its own behaviour.
-
-.. _bootmem:
-
-Bootmem
-=======
-
-(mostly stolen from Mel Gorman's "Understanding the Linux Virtual
-Memory Manager" `book`_)
-
-.. _book: https://www.kernel.org/doc/gorman/
-
-.. kernel-doc:: mm/bootmem.c
- :doc: bootmem overview
+when an allocation fails and those that don't.
-.. _memblock:
+Memblock also offers a variety of APIs that control its own behaviour.
-Memblock
-========
+Memblock Overview
+=================
.. kernel-doc:: mm/memblock.c
:doc: memblock overview
@@ -61,26 +30,6 @@ Memblock
Functions and structures
========================
-Common API
-----------
-
-The functions that are described in this section are available
-regardless of what early memory manager is enabled.
-
-.. kernel-doc:: mm/nobootmem.c
-
-Bootmem specific API
---------------------
-
-These interfaces available only with bootmem, i.e when ``CONFIG_NO_BOOTMEM=n``
-
-.. kernel-doc:: include/linux/bootmem.h
-.. kernel-doc:: mm/bootmem.c
- :nodocs:
-
-Memblock specific API
----------------------
-
Here is the description of memblock data structures, functions and
macros. Some of them are actually internal, but since they are
documented it would be silly to omit them. Besides, reading the
@@ -89,4 +38,4 @@ really happens under the hood.
.. kernel-doc:: include/linux/memblock.h
.. kernel-doc:: mm/memblock.c
- :nodocs:
+ :functions:
diff --git a/Documentation/core-api/gfp_mask-from-fs-io.rst b/Documentation/core-api/gfp_mask-from-fs-io.rst
index e0df8f416582..e7c32a8de126 100644
--- a/Documentation/core-api/gfp_mask-from-fs-io.rst
+++ b/Documentation/core-api/gfp_mask-from-fs-io.rst
@@ -1,3 +1,5 @@
+.. _gfp_mask_from_fs_io:
+
=================================
GFP masks used from FS/IO context
=================================
diff --git a/Documentation/core-api/idr.rst b/Documentation/core-api/idr.rst
index d351e880a2f6..a2738050c4f0 100644
--- a/Documentation/core-api/idr.rst
+++ b/Documentation/core-api/idr.rst
@@ -1,4 +1,4 @@
-.. SPDX-License-Identifier: CC-BY-SA-4.0
+.. SPDX-License-Identifier: GPL-2.0+
=============
ID Allocation
diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst
index 26b735cefb93..3adee82be311 100644
--- a/Documentation/core-api/index.rst
+++ b/Documentation/core-api/index.rst
@@ -21,16 +21,20 @@ Core utilities
local_ops
workqueue
genericirq
+ xarray
flexible-arrays
librs
genalloc
errseq
printk-formats
circular-buffers
+ memory-allocation
mm-api
gfp_mask-from-fs-io
timekeeping
boot-time-mm
+ memory-hotplug
+
Interfaces for kernel debugging
===============================
diff --git a/Documentation/core-api/memory-allocation.rst b/Documentation/core-api/memory-allocation.rst
new file mode 100644
index 000000000000..f8bb9aa120c4
--- /dev/null
+++ b/Documentation/core-api/memory-allocation.rst
@@ -0,0 +1,122 @@
+=======================
+Memory Allocation Guide
+=======================
+
+Linux provides a variety of APIs for memory allocation. You can
+allocate small chunks using `kmalloc` or `kmem_cache_alloc` families,
+large virtually contiguous areas using `vmalloc` and its derivatives,
+or you can directly request pages from the page allocator with
+`alloc_pages`. It is also possible to use more specialized allocators,
+for instance `cma_alloc` or `zs_malloc`.
+
+Most of the memory allocation APIs use GFP flags to express how that
+memory should be allocated. The GFP acronym stands for "get free
+pages", the underlying memory allocation function.
+
+Diversity of the allocation APIs combined with the numerous GFP flags
+makes the question "How should I allocate memory?" not that easy to
+answer, although very likely you should use
+
+::
+
+ kzalloc(<size>, GFP_KERNEL);
+
+Of course there are cases when other allocation APIs and different GFP
+flags must be used.
+
+Get Free Page flags
+===================
+
+The GFP flags control the allocators behavior. They tell what memory
+zones can be used, how hard the allocator should try to find free
+memory, whether the memory can be accessed by the userspace etc. The
+:ref:`Documentation/core-api/mm-api.rst <mm-api-gfp-flags>` provides
+reference documentation for the GFP flags and their combinations and
+here we briefly outline their recommended usage:
+
+ * Most of the time ``GFP_KERNEL`` is what you need. Memory for the
+ kernel data structures, DMAable memory, inode cache, all these and
+ many other allocations types can use ``GFP_KERNEL``. Note, that
+ using ``GFP_KERNEL`` implies ``GFP_RECLAIM``, which means that
+ direct reclaim may be triggered under memory pressure; the calling
+ context must be allowed to sleep.
+ * If the allocation is performed from an atomic context, e.g interrupt
+ handler, use ``GFP_NOWAIT``. This flag prevents direct reclaim and
+ IO or filesystem operations. Consequently, under memory pressure
+ ``GFP_NOWAIT`` allocation is likely to fail. Allocations which
+ have a reasonable fallback should be using ``GFP_NOWARN``.
+ * If you think that accessing memory reserves is justified and the kernel
+ will be stressed unless allocation succeeds, you may use ``GFP_ATOMIC``.
+ * Untrusted allocations triggered from userspace should be a subject
+ of kmem accounting and must have ``__GFP_ACCOUNT`` bit set. There
+ is the handy ``GFP_KERNEL_ACCOUNT`` shortcut for ``GFP_KERNEL``
+ allocations that should be accounted.
+ * Userspace allocations should use either of the ``GFP_USER``,
+ ``GFP_HIGHUSER`` or ``GFP_HIGHUSER_MOVABLE`` flags. The longer
+ the flag name the less restrictive it is.
+
+ ``GFP_HIGHUSER_MOVABLE`` does not require that allocated memory
+ will be directly accessible by the kernel and implies that the
+ data is movable.
+
+ ``GFP_HIGHUSER`` means that the allocated memory is not movable,
+ but it is not required to be directly accessible by the kernel. An
+ example may be a hardware allocation that maps data directly into
+ userspace but has no addressing limitations.
+
+ ``GFP_USER`` means that the allocated memory is not movable and it
+ must be directly accessible by the kernel.
+
+You may notice that quite a few allocations in the existing code
+specify ``GFP_NOIO`` or ``GFP_NOFS``. Historically, they were used to
+prevent recursion deadlocks caused by direct memory reclaim calling
+back into the FS or IO paths and blocking on already held
+resources. Since 4.12 the preferred way to address this issue is to
+use new scope APIs described in
+:ref:`Documentation/core-api/gfp_mask-from-fs-io.rst <gfp_mask_from_fs_io>`.
+
+Other legacy GFP flags are ``GFP_DMA`` and ``GFP_DMA32``. They are
+used to ensure that the allocated memory is accessible by hardware
+with limited addressing capabilities. So unless you are writing a
+driver for a device with such restrictions, avoid using these flags.
+And even with hardware with restrictions it is preferable to use
+`dma_alloc*` APIs.
+
+Selecting memory allocator
+==========================
+
+The most straightforward way to allocate memory is to use a function
+from the :c:func:`kmalloc` family. And, to be on the safe size it's
+best to use routines that set memory to zero, like
+:c:func:`kzalloc`. If you need to allocate memory for an array, there
+are :c:func:`kmalloc_array` and :c:func:`kcalloc` helpers.
+
+The maximal size of a chunk that can be allocated with `kmalloc` is
+limited. The actual limit depends on the hardware and the kernel
+configuration, but it is a good practice to use `kmalloc` for objects
+smaller than page size.
+
+For large allocations you can use :c:func:`vmalloc` and
+:c:func:`vzalloc`, or directly request pages from the page
+allocator. The memory allocated by `vmalloc` and related functions is
+not physically contiguous.
+
+If you are not sure whether the allocation size is too large for
+`kmalloc`, it is possible to use :c:func:`kvmalloc` and its
+derivatives. It will try to allocate memory with `kmalloc` and if the
+allocation fails it will be retried with `vmalloc`. There are
+restrictions on which GFP flags can be used with `kvmalloc`; please
+see :c:func:`kvmalloc_node` reference documentation. Note that
+`kvmalloc` may return memory that is not physically contiguous.
+
+If you need to allocate many identical objects you can use the slab
+cache allocator. The cache should be set up with
+:c:func:`kmem_cache_create` before it can be used. Afterwards
+:c:func:`kmem_cache_alloc` and its convenience wrappers can allocate
+memory from that cache.
+
+When the allocated memory is no longer needed it must be freed. You
+can use :c:func:`kvfree` for the memory allocated with `kmalloc`,
+`vmalloc` and `kvmalloc`. The slab caches should be freed with
+:c:func:`kmem_cache_free`. And don't forget to destroy the cache with
+:c:func:`kmem_cache_destroy`.
diff --git a/Documentation/core-api/memory-hotplug.rst b/Documentation/core-api/memory-hotplug.rst
new file mode 100644
index 000000000000..de7467e48067
--- /dev/null
+++ b/Documentation/core-api/memory-hotplug.rst
@@ -0,0 +1,125 @@
+.. _memory_hotplug:
+
+==============
+Memory hotplug
+==============
+
+Memory hotplug event notifier
+=============================
+
+Hotplugging events are sent to a notification queue.
+
+There are six types of notification defined in ``include/linux/memory.h``:
+
+MEM_GOING_ONLINE
+ Generated before new memory becomes available in order to be able to
+ prepare subsystems to handle memory. The page allocator is still unable
+ to allocate from the new memory.
+
+MEM_CANCEL_ONLINE
+ Generated if MEM_GOING_ONLINE fails.
+
+MEM_ONLINE
+ Generated when memory has successfully brought online. The callback may
+ allocate pages from the new memory.
+
+MEM_GOING_OFFLINE
+ Generated to begin the process of offlining memory. Allocations are no
+ longer possible from the memory but some of the memory to be offlined
+ is still in use. The callback can be used to free memory known to a
+ subsystem from the indicated memory block.
+
+MEM_CANCEL_OFFLINE
+ Generated if MEM_GOING_OFFLINE fails. Memory is available again from
+ the memory block that we attempted to offline.
+
+MEM_OFFLINE
+ Generated after offlining memory is complete.
+
+A callback routine can be registered by calling::
+
+ hotplug_memory_notifier(callback_func, priority)
+
+Callback functions with higher values of priority are called before callback
+functions with lower values.
+
+A callback function must have the following prototype::
+
+ int callback_func(
+ struct notifier_block *self, unsigned long action, void *arg);
+
+The first argument of the callback function (self) is a pointer to the block
+of the notifier chain that points to the callback function itself.
+The second argument (action) is one of the event types described above.
+The third argument (arg) passes a pointer of struct memory_notify::
+
+ struct memory_notify {
+ unsigned long start_pfn;
+ unsigned long nr_pages;
+ int status_change_nid_normal;
+ int status_change_nid_high;
+ int status_change_nid;
+ }
+
+- start_pfn is start_pfn of online/offline memory.
+- nr_pages is # of pages of online/offline memory.
+- status_change_nid_normal is set node id when N_NORMAL_MEMORY of nodemask
+ is (will be) set/clear, if this is -1, then nodemask status is not changed.
+- status_change_nid_high is set node id when N_HIGH_MEMORY of nodemask
+ is (will be) set/clear, if this is -1, then nodemask status is not changed.
+- status_change_nid is set node id when N_MEMORY of nodemask is (will be)
+ set/clear. It means a new(memoryless) node gets new memory by online and a
+ node loses all memory. If this is -1, then nodemask status is not changed.
+
+ If status_changed_nid* >= 0, callback should create/discard structures for the
+ node if necessary.
+
+The callback routine shall return one of the values
+NOTIFY_DONE, NOTIFY_OK, NOTIFY_BAD, NOTIFY_STOP
+defined in ``include/linux/notifier.h``
+
+NOTIFY_DONE and NOTIFY_OK have no effect on the further processing.
+
+NOTIFY_BAD is used as response to the MEM_GOING_ONLINE, MEM_GOING_OFFLINE,
+MEM_ONLINE, or MEM_OFFLINE action to cancel hotplugging. It stops
+further processing of the notification queue.
+
+NOTIFY_STOP stops further processing of the notification queue.
+
+Locking Internals
+=================
+
+When adding/removing memory that uses memory block devices (i.e. ordinary RAM),
+the device_hotplug_lock should be held to:
+
+- synchronize against online/offline requests (e.g. via sysfs). This way, memory
+ block devices can only be accessed (.online/.state attributes) by user
+ space once memory has been fully added. And when removing memory, we
+ know nobody is in critical sections.
+- synchronize against CPU hotplug and similar (e.g. relevant for ACPI and PPC)
+
+Especially, there is a possible lock inversion that is avoided using
+device_hotplug_lock when adding memory and user space tries to online that
+memory faster than expected:
+
+- device_online() will first take the device_lock(), followed by
+ mem_hotplug_lock
+- add_memory_resource() will first take the mem_hotplug_lock, followed by
+ the device_lock() (while creating the devices, during bus_add_device()).
+
+As the device is visible to user space before taking the device_lock(), this
+can result in a lock inversion.
+
+onlining/offlining of memory should be done via device_online()/
+device_offline() - to make sure it is properly synchronized to actions
+via sysfs. Holding device_hotplug_lock is advised (to e.g. protect online_type)
+
+When adding/removing/onlining/offlining memory or adding/removing
+heterogeneous/device memory, we should always hold the mem_hotplug_lock in
+write mode to serialise memory hotplug (e.g. access to global/zone
+variables).
+
+In addition, mem_hotplug_lock (in contrast to device_hotplug_lock) in read
+mode allows for a quite efficient get_online_mems/put_online_mems
+implementation, so code accessing memory can protect from that memory
+vanishing.
diff --git a/Documentation/core-api/mm-api.rst b/Documentation/core-api/mm-api.rst
index 46ae3537fb12..5ce1ec1dd066 100644
--- a/Documentation/core-api/mm-api.rst
+++ b/Documentation/core-api/mm-api.rst
@@ -14,6 +14,8 @@ User Space Memory Access
.. kernel-doc:: mm/util.c
:functions: get_user_pages_fast
+.. _mm-api-gfp-flags:
+
Memory Allocation Controls
==========================
diff --git a/Documentation/core-api/printk-formats.rst b/Documentation/core-api/printk-formats.rst
index 25dc591cb110..ff48b55040ef 100644
--- a/Documentation/core-api/printk-formats.rst
+++ b/Documentation/core-api/printk-formats.rst
@@ -376,15 +376,15 @@ correctness of the format string and va_list arguments.
Passed by reference.
-kobjects
---------
+Device tree nodes
+-----------------
::
%pOF[fnpPcCF]
-For printing kobject based structs (device nodes). Default behaviour is
+For printing device tree node structures. Default behaviour is
equivalent to %pOFf.
- f - device node full_name
@@ -420,9 +420,8 @@ struct clk
%pC pll1
%pCn pll1
-For printing struct clk structures. %pC and %pCn print the name
-(Common Clock Framework) or address (legacy clock framework) of the
-structure.
+For printing struct clk structures. %pC and %pCn print the name of the clock
+(Common Clock Framework) or a unique 32-bit ID (legacy clock framework).
Passed by reference.
diff --git a/Documentation/core-api/xarray.rst b/Documentation/core-api/xarray.rst
new file mode 100644
index 000000000000..a4e705108f42
--- /dev/null
+++ b/Documentation/core-api/xarray.rst
@@ -0,0 +1,435 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+======
+XArray
+======
+
+:Author: Matthew Wilcox
+
+Overview
+========
+
+The XArray is an abstract data type which behaves like a very large array
+of pointers. It meets many of the same needs as a hash or a conventional
+resizable array. Unlike a hash, it allows you to sensibly go to the
+next or previous entry in a cache-efficient manner. In contrast to a
+resizable array, there is no need to copy data or change MMU mappings in
+order to grow the array. It is more memory-efficient, parallelisable
+and cache friendly than a doubly-linked list. It takes advantage of
+RCU to perform lookups without locking.
+
+The XArray implementation is efficient when the indices used are densely
+clustered; hashing the object and using the hash as the index will not
+perform well. The XArray is optimised for small indices, but still has
+good performance with large indices. If your index can be larger than
+``ULONG_MAX`` then the XArray is not the data type for you. The most
+important user of the XArray is the page cache.
+
+Each non-``NULL`` entry in the array has three bits associated with
+it called marks. Each mark may be set or cleared independently of
+the others. You can iterate over entries which are marked.
+
+Normal pointers may be stored in the XArray directly. They must be 4-byte
+aligned, which is true for any pointer returned from :c:func:`kmalloc` and
+:c:func:`alloc_page`. It isn't true for arbitrary user-space pointers,
+nor for function pointers. You can store pointers to statically allocated
+objects, as long as those objects have an alignment of at least 4.
+
+You can also store integers between 0 and ``LONG_MAX`` in the XArray.
+You must first convert it into an entry using :c:func:`xa_mk_value`.
+When you retrieve an entry from the XArray, you can check whether it is
+a value entry by calling :c:func:`xa_is_value`, and convert it back to
+an integer by calling :c:func:`xa_to_value`.
+
+Some users want to store tagged pointers instead of using the marks
+described above. They can call :c:func:`xa_tag_pointer` to create an
+entry with a tag, :c:func:`xa_untag_pointer` to turn a tagged entry
+back into an untagged pointer and :c:func:`xa_pointer_tag` to retrieve
+the tag of an entry. Tagged pointers use the same bits that are used
+to distinguish value entries from normal pointers, so each user must
+decide whether they want to store value entries or tagged pointers in
+any particular XArray.
+
+The XArray does not support storing :c:func:`IS_ERR` pointers as some
+conflict with value entries or internal entries.
+
+An unusual feature of the XArray is the ability to create entries which
+occupy a range of indices. Once stored to, looking up any index in
+the range will return the same entry as looking up any other index in
+the range. Setting a mark on one index will set it on all of them.
+Storing to any index will store to all of them. Multi-index entries can
+be explicitly split into smaller entries, or storing ``NULL`` into any
+entry will cause the XArray to forget about the range.
+
+Normal API
+==========
+
+Start by initialising an XArray, either with :c:func:`DEFINE_XARRAY`
+for statically allocated XArrays or :c:func:`xa_init` for dynamically
+allocated ones. A freshly-initialised XArray contains a ``NULL``
+pointer at every index.
+
+You can then set entries using :c:func:`xa_store` and get entries
+using :c:func:`xa_load`. xa_store will overwrite any entry with the
+new entry and return the previous entry stored at that index. You can
+use :c:func:`xa_erase` instead of calling :c:func:`xa_store` with a
+``NULL`` entry. There is no difference between an entry that has never
+been stored to and one that has most recently had ``NULL`` stored to it.
+
+You can conditionally replace an entry at an index by using
+:c:func:`xa_cmpxchg`. Like :c:func:`cmpxchg`, it will only succeed if
+the entry at that index has the 'old' value. It also returns the entry
+which was at that index; if it returns the same entry which was passed as
+'old', then :c:func:`xa_cmpxchg` succeeded.
+
+If you want to only store a new entry to an index if the current entry
+at that index is ``NULL``, you can use :c:func:`xa_insert` which
+returns ``-EEXIST`` if the entry is not empty.
+
+You can enquire whether a mark is set on an entry by using
+:c:func:`xa_get_mark`. If the entry is not ``NULL``, you can set a mark
+on it by using :c:func:`xa_set_mark` and remove the mark from an entry by
+calling :c:func:`xa_clear_mark`. You can ask whether any entry in the
+XArray has a particular mark set by calling :c:func:`xa_marked`.
+
+You can copy entries out of the XArray into a plain array by calling
+:c:func:`xa_extract`. Or you can iterate over the present entries in
+the XArray by calling :c:func:`xa_for_each`. You may prefer to use
+:c:func:`xa_find` or :c:func:`xa_find_after` to move to the next present
+entry in the XArray.
+
+Calling :c:func:`xa_store_range` stores the same entry in a range
+of indices. If you do this, some of the other operations will behave
+in a slightly odd way. For example, marking the entry at one index
+may result in the entry being marked at some, but not all of the other
+indices. Storing into one index may result in the entry retrieved by
+some, but not all of the other indices changing.
+
+Finally, you can remove all entries from an XArray by calling
+:c:func:`xa_destroy`. If the XArray entries are pointers, you may wish
+to free the entries first. You can do this by iterating over all present
+entries in the XArray using the :c:func:`xa_for_each` iterator.
+
+ID assignment
+-------------
+
+You can call :c:func:`xa_alloc` to store the entry at any unused index
+in the XArray. If you need to modify the array from interrupt context,
+you can use :c:func:`xa_alloc_bh` or :c:func:`xa_alloc_irq` to disable
+interrupts while allocating the ID. Unlike :c:func:`xa_store`, allocating
+a ``NULL`` pointer does not delete an entry. Instead it reserves an
+entry like :c:func:`xa_reserve` and you can release it using either
+:c:func:`xa_erase` or :c:func:`xa_release`. To use ID assignment, the
+XArray must be defined with :c:func:`DEFINE_XARRAY_ALLOC`, or initialised
+by passing ``XA_FLAGS_ALLOC`` to :c:func:`xa_init_flags`,
+
+Memory allocation
+-----------------
+
+The :c:func:`xa_store`, :c:func:`xa_cmpxchg`, :c:func:`xa_alloc`,
+:c:func:`xa_reserve` and :c:func:`xa_insert` functions take a gfp_t
+parameter in case the XArray needs to allocate memory to store this entry.
+If the entry is being deleted, no memory allocation needs to be performed,
+and the GFP flags specified will be ignored.
+
+It is possible for no memory to be allocatable, particularly if you pass
+a restrictive set of GFP flags. In that case, the functions return a
+special value which can be turned into an errno using :c:func:`xa_err`.
+If you don't need to know exactly which error occurred, using
+:c:func:`xa_is_err` is slightly more efficient.
+
+Locking
+-------
+
+When using the Normal API, you do not have to worry about locking.
+The XArray uses RCU and an internal spinlock to synchronise access:
+
+No lock needed:
+ * :c:func:`xa_empty`
+ * :c:func:`xa_marked`
+
+Takes RCU read lock:
+ * :c:func:`xa_load`
+ * :c:func:`xa_for_each`
+ * :c:func:`xa_find`
+ * :c:func:`xa_find_after`
+ * :c:func:`xa_extract`
+ * :c:func:`xa_get_mark`
+
+Takes xa_lock internally:
+ * :c:func:`xa_store`
+ * :c:func:`xa_insert`
+ * :c:func:`xa_erase`
+ * :c:func:`xa_erase_bh`
+ * :c:func:`xa_erase_irq`
+ * :c:func:`xa_cmpxchg`
+ * :c:func:`xa_store_range`
+ * :c:func:`xa_alloc`
+ * :c:func:`xa_alloc_bh`
+ * :c:func:`xa_alloc_irq`
+ * :c:func:`xa_destroy`
+ * :c:func:`xa_set_mark`
+ * :c:func:`xa_clear_mark`
+
+Assumes xa_lock held on entry:
+ * :c:func:`__xa_store`
+ * :c:func:`__xa_insert`
+ * :c:func:`__xa_erase`
+ * :c:func:`__xa_cmpxchg`
+ * :c:func:`__xa_alloc`
+ * :c:func:`__xa_set_mark`
+ * :c:func:`__xa_clear_mark`
+
+If you want to take advantage of the lock to protect the data structures
+that you are storing in the XArray, you can call :c:func:`xa_lock`
+before calling :c:func:`xa_load`, then take a reference count on the
+object you have found before calling :c:func:`xa_unlock`. This will
+prevent stores from removing the object from the array between looking
+up the object and incrementing the refcount. You can also use RCU to
+avoid dereferencing freed memory, but an explanation of that is beyond
+the scope of this document.
+
+The XArray does not disable interrupts or softirqs while modifying
+the array. It is safe to read the XArray from interrupt or softirq
+context as the RCU lock provides enough protection.
+
+If, for example, you want to store entries in the XArray in process
+context and then erase them in softirq context, you can do that this way::
+
+ void foo_init(struct foo *foo)
+ {
+ xa_init_flags(&foo->array, XA_FLAGS_LOCK_BH);
+ }
+
+ int foo_store(struct foo *foo, unsigned long index, void *entry)
+ {
+ int err;
+
+ xa_lock_bh(&foo->array);
+ err = xa_err(__xa_store(&foo->array, index, entry, GFP_KERNEL));
+ if (!err)
+ foo->count++;
+ xa_unlock_bh(&foo->array);
+ return err;
+ }
+
+ /* foo_erase() is only called from softirq context */
+ void foo_erase(struct foo *foo, unsigned long index)
+ {
+ xa_lock(&foo->array);
+ __xa_erase(&foo->array, index);
+ foo->count--;
+ xa_unlock(&foo->array);
+ }
+
+If you are going to modify the XArray from interrupt or softirq context,
+you need to initialise the array using :c:func:`xa_init_flags`, passing
+``XA_FLAGS_LOCK_IRQ`` or ``XA_FLAGS_LOCK_BH``.
+
+The above example also shows a common pattern of wanting to extend the
+coverage of the xa_lock on the store side to protect some statistics
+associated with the array.
+
+Sharing the XArray with interrupt context is also possible, either
+using :c:func:`xa_lock_irqsave` in both the interrupt handler and process
+context, or :c:func:`xa_lock_irq` in process context and :c:func:`xa_lock`
+in the interrupt handler. Some of the more common patterns have helper
+functions such as :c:func:`xa_erase_bh` and :c:func:`xa_erase_irq`.
+
+Sometimes you need to protect access to the XArray with a mutex because
+that lock sits above another mutex in the locking hierarchy. That does
+not entitle you to use functions like :c:func:`__xa_erase` without taking
+the xa_lock; the xa_lock is used for lockdep validation and will be used
+for other purposes in the future.
+
+The :c:func:`__xa_set_mark` and :c:func:`__xa_clear_mark` functions are also
+available for situations where you look up an entry and want to atomically
+set or clear a mark. It may be more efficient to use the advanced API
+in this case, as it will save you from walking the tree twice.
+
+Advanced API
+============
+
+The advanced API offers more flexibility and better performance at the
+cost of an interface which can be harder to use and has fewer safeguards.
+No locking is done for you by the advanced API, and you are required
+to use the xa_lock while modifying the array. You can choose whether
+to use the xa_lock or the RCU lock while doing read-only operations on
+the array. You can mix advanced and normal operations on the same array;
+indeed the normal API is implemented in terms of the advanced API. The
+advanced API is only available to modules with a GPL-compatible license.
+
+The advanced API is based around the xa_state. This is an opaque data
+structure which you declare on the stack using the :c:func:`XA_STATE`
+macro. This macro initialises the xa_state ready to start walking
+around the XArray. It is used as a cursor to maintain the position
+in the XArray and let you compose various operations together without
+having to restart from the top every time.
+
+The xa_state is also used to store errors. You can call
+:c:func:`xas_error` to retrieve the error. All operations check whether
+the xa_state is in an error state before proceeding, so there's no need
+for you to check for an error after each call; you can make multiple
+calls in succession and only check at a convenient point. The only
+errors currently generated by the XArray code itself are ``ENOMEM`` and
+``EINVAL``, but it supports arbitrary errors in case you want to call
+:c:func:`xas_set_err` yourself.
+
+If the xa_state is holding an ``ENOMEM`` error, calling :c:func:`xas_nomem`
+will attempt to allocate more memory using the specified gfp flags and
+cache it in the xa_state for the next attempt. The idea is that you take
+the xa_lock, attempt the operation and drop the lock. The operation
+attempts to allocate memory while holding the lock, but it is more
+likely to fail. Once you have dropped the lock, :c:func:`xas_nomem`
+can try harder to allocate more memory. It will return ``true`` if it
+is worth retrying the operation (i.e. that there was a memory error *and*
+more memory was allocated). If it has previously allocated memory, and
+that memory wasn't used, and there is no error (or some error that isn't
+``ENOMEM``), then it will free the memory previously allocated.
+
+Internal Entries
+----------------
+
+The XArray reserves some entries for its own purposes. These are never
+exposed through the normal API, but when using the advanced API, it's
+possible to see them. Usually the best way to handle them is to pass them
+to :c:func:`xas_retry`, and retry the operation if it returns ``true``.
+
+.. flat-table::
+ :widths: 1 1 6
+
+ * - Name
+ - Test
+ - Usage
+
+ * - Node
+ - :c:func:`xa_is_node`
+ - An XArray node. May be visible when using a multi-index xa_state.
+
+ * - Sibling
+ - :c:func:`xa_is_sibling`
+ - A non-canonical entry for a multi-index entry. The value indicates
+ which slot in this node has the canonical entry.
+
+ * - Retry
+ - :c:func:`xa_is_retry`
+ - This entry is currently being modified by a thread which has the
+ xa_lock. The node containing this entry may be freed at the end
+ of this RCU period. You should restart the lookup from the head
+ of the array.
+
+ * - Zero
+ - :c:func:`xa_is_zero`
+ - Zero entries appear as ``NULL`` through the Normal API, but occupy
+ an entry in the XArray which can be used to reserve the index for
+ future use.
+
+Other internal entries may be added in the future. As far as possible, they
+will be handled by :c:func:`xas_retry`.
+
+Additional functionality
+------------------------
+
+The :c:func:`xas_create_range` function allocates all the necessary memory
+to store every entry in a range. It will set ENOMEM in the xa_state if
+it cannot allocate memory.
+
+You can use :c:func:`xas_init_marks` to reset the marks on an entry
+to their default state. This is usually all marks clear, unless the
+XArray is marked with ``XA_FLAGS_TRACK_FREE``, in which case mark 0 is set
+and all other marks are clear. Replacing one entry with another using
+:c:func:`xas_store` will not reset the marks on that entry; if you want
+the marks reset, you should do that explicitly.
+
+The :c:func:`xas_load` will walk the xa_state as close to the entry
+as it can. If you know the xa_state has already been walked to the
+entry and need to check that the entry hasn't changed, you can use
+:c:func:`xas_reload` to save a function call.
+
+If you need to move to a different index in the XArray, call
+:c:func:`xas_set`. This resets the cursor to the top of the tree, which
+will generally make the next operation walk the cursor to the desired
+spot in the tree. If you want to move to the next or previous index,
+call :c:func:`xas_next` or :c:func:`xas_prev`. Setting the index does
+not walk the cursor around the array so does not require a lock to be
+held, while moving to the next or previous index does.
+
+You can search for the next present entry using :c:func:`xas_find`. This
+is the equivalent of both :c:func:`xa_find` and :c:func:`xa_find_after`;
+if the cursor has been walked to an entry, then it will find the next
+entry after the one currently referenced. If not, it will return the
+entry at the index of the xa_state. Using :c:func:`xas_next_entry` to
+move to the next present entry instead of :c:func:`xas_find` will save
+a function call in the majority of cases at the expense of emitting more
+inline code.
+
+The :c:func:`xas_find_marked` function is similar. If the xa_state has
+not been walked, it will return the entry at the index of the xa_state,
+if it is marked. Otherwise, it will return the first marked entry after
+the entry referenced by the xa_state. The :c:func:`xas_next_marked`
+function is the equivalent of :c:func:`xas_next_entry`.
+
+When iterating over a range of the XArray using :c:func:`xas_for_each`
+or :c:func:`xas_for_each_marked`, it may be necessary to temporarily stop
+the iteration. The :c:func:`xas_pause` function exists for this purpose.
+After you have done the necessary work and wish to resume, the xa_state
+is in an appropriate state to continue the iteration after the entry
+you last processed. If you have interrupts disabled while iterating,
+then it is good manners to pause the iteration and reenable interrupts
+every ``XA_CHECK_SCHED`` entries.
+
+The :c:func:`xas_get_mark`, :c:func:`xas_set_mark` and
+:c:func:`xas_clear_mark` functions require the xa_state cursor to have
+been moved to the appropriate location in the xarray; they will do
+nothing if you have called :c:func:`xas_pause` or :c:func:`xas_set`
+immediately before.
+
+You can call :c:func:`xas_set_update` to have a callback function
+called each time the XArray updates a node. This is used by the page
+cache workingset code to maintain its list of nodes which contain only
+shadow entries.
+
+Multi-Index Entries
+-------------------
+
+The XArray has the ability to tie multiple indices together so that
+operations on one index affect all indices. For example, storing into
+any index will change the value of the entry retrieved from any index.
+Setting or clearing a mark on any index will set or clear the mark
+on every index that is tied together. The current implementation
+only allows tying ranges which are aligned powers of two together;
+eg indices 64-127 may be tied together, but 2-6 may not be. This may
+save substantial quantities of memory; for example tying 512 entries
+together will save over 4kB.
+
+You can create a multi-index entry by using :c:func:`XA_STATE_ORDER`
+or :c:func:`xas_set_order` followed by a call to :c:func:`xas_store`.
+Calling :c:func:`xas_load` with a multi-index xa_state will walk the
+xa_state to the right location in the tree, but the return value is not
+meaningful, potentially being an internal entry or ``NULL`` even when there
+is an entry stored within the range. Calling :c:func:`xas_find_conflict`
+will return the first entry within the range or ``NULL`` if there are no
+entries in the range. The :c:func:`xas_for_each_conflict` iterator will
+iterate over every entry which overlaps the specified range.
+
+If :c:func:`xas_load` encounters a multi-index entry, the xa_index
+in the xa_state will not be changed. When iterating over an XArray
+or calling :c:func:`xas_find`, if the initial index is in the middle
+of a multi-index entry, it will not be altered. Subsequent calls
+or iterations will move the index to the first index in the range.
+Each entry will only be returned once, no matter how many indices it
+occupies.
+
+Using :c:func:`xas_next` or :c:func:`xas_prev` with a multi-index xa_state
+is not supported. Using either of these functions on a multi-index entry
+will reveal sibling entries; these should be skipped over by the caller.
+
+Storing ``NULL`` into any index of a multi-index entry will set the entry
+at every index to ``NULL`` and dissolve the tie. Splitting a multi-index
+entry into entries occupying smaller ranges is not yet supported.
+
+Functions and structures
+========================
+
+.. kernel-doc:: include/linux/xarray.h
+.. kernel-doc:: lib/xarray.c
diff --git a/Documentation/crypto/asymmetric-keys.txt b/Documentation/crypto/asymmetric-keys.txt
index 5969bf42562a..8763866b11cf 100644
--- a/Documentation/crypto/asymmetric-keys.txt
+++ b/Documentation/crypto/asymmetric-keys.txt
@@ -183,6 +183,10 @@ and looks like the following:
void (*describe)(const struct key *key, struct seq_file *m);
void (*destroy)(void *payload);
+ int (*query)(const struct kernel_pkey_params *params,
+ struct kernel_pkey_query *info);
+ int (*eds_op)(struct kernel_pkey_params *params,
+ const void *in, void *out);
int (*verify_signature)(const struct key *key,
const struct public_key_signature *sig);
};
@@ -207,12 +211,22 @@ There are a number of operations defined by the subtype:
asymmetric key will look after freeing the fingerprint and releasing the
reference on the subtype module.
- (3) verify_signature().
+ (3) query().
- Optional. These are the entry points for the key usage operations.
- Currently there is only the one defined. If not set, the caller will be
- given -ENOTSUPP. The subtype may do anything it likes to implement an
- operation, including offloading to hardware.
+ Mandatory. This is a function for querying the capabilities of a key.
+
+ (4) eds_op().
+
+ Optional. This is the entry point for the encryption, decryption and
+ signature creation operations (which are distinguished by the operation ID
+ in the parameter struct). The subtype may do anything it likes to
+ implement an operation, including offloading to hardware.
+
+ (5) verify_signature().
+
+ Optional. This is the entry point for signature verification. The
+ subtype may do anything it likes to implement an operation, including
+ offloading to hardware.
==========================
@@ -234,6 +248,8 @@ Examples of blob formats for which parsers could be implemented include:
- X.509 ASN.1 stream.
- Pointer to TPM key.
- Pointer to UEFI key.
+ - PKCS#8 private key [RFC 5208].
+ - PKCS#5 encrypted private key [RFC 2898].
During key instantiation each parser in the list is tried until one doesn't
return -EBADMSG.
diff --git a/Documentation/dev-tools/coccinelle.rst b/Documentation/dev-tools/coccinelle.rst
index 94f41c290bfc..aa14f05cabb1 100644
--- a/Documentation/dev-tools/coccinelle.rst
+++ b/Documentation/dev-tools/coccinelle.rst
@@ -30,18 +30,29 @@ of many distributions, e.g. :
- NetBSD
- FreeBSD
-You can get the latest version released from the Coccinelle homepage at
+Some distribution packages are obsolete and it is recommended
+to use the latest version released from the Coccinelle homepage at
http://coccinelle.lip6.fr/
-Once you have it, run the following command::
+Or from Github at:
- ./configure
+https://github.com/coccinelle/coccinelle
+
+Once you have it, run the following commands::
+
+ ./autogen
+ ./configure
make
as a regular user, and install it with::
sudo make install
+More detailed installation instructions to build from source can be
+found at:
+
+https://github.com/coccinelle/coccinelle/blob/master/install.txt
+
Supplemental documentation
---------------------------
@@ -51,6 +62,10 @@ https://bottest.wiki.kernel.org/coccicheck
The wiki documentation always refers to the linux-next version of the script.
+For Semantic Patch Language(SmPL) grammar documentation refer to:
+
+http://coccinelle.lip6.fr/documentation.php
+
Using Coccinelle on the Linux kernel
------------------------------------
@@ -223,7 +238,7 @@ Since coccicheck runs through make, it naturally runs from the kernel
proper dir, as such the second rule above would be implied for picking up a
.cocciconfig when using ``make coccicheck``.
-``make coccicheck`` also supports using M= targets.If you do not supply
+``make coccicheck`` also supports using M= targets. If you do not supply
any M= target, it is assumed you want to target the entire kernel.
The kernel coccicheck script has::
diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst
index 6f653acea248..dad1bb8711e2 100644
--- a/Documentation/dev-tools/kselftest.rst
+++ b/Documentation/dev-tools/kselftest.rst
@@ -159,7 +159,7 @@ Contributing new tests (details)
* If a test needs specific kernel config options enabled, add a config file in
the test directory to enable them.
- e.g: tools/testing/selftests/android/ion/config
+ e.g: tools/testing/selftests/android/config
Test Harness
============
diff --git a/Documentation/device-mapper/dm-flakey.txt b/Documentation/device-mapper/dm-flakey.txt
index c43030718cef..9f0e247d0877 100644
--- a/Documentation/device-mapper/dm-flakey.txt
+++ b/Documentation/device-mapper/dm-flakey.txt
@@ -33,6 +33,10 @@ Optional feature parameters:
All write I/O is silently ignored.
Read I/O is handled correctly.
+ error_writes:
+ All write I/O is failed with an error signalled.
+ Read I/O is handled correctly.
+
corrupt_bio_byte <Nth_byte> <direction> <value> <flags>:
During <down interval>, replace <Nth_byte> of the data of
each matching bio with <value>.
diff --git a/Documentation/device-mapper/log-writes.txt b/Documentation/device-mapper/log-writes.txt
index f4ebcbaf50f3..b638d124be6a 100644
--- a/Documentation/device-mapper/log-writes.txt
+++ b/Documentation/device-mapper/log-writes.txt
@@ -38,7 +38,7 @@ inconsistent file system.
Any REQ_FUA requests bypass this flushing mechanism and are logged as soon as
they complete as those requests will obviously bypass the device cache.
-Any REQ_DISCARD requests are treated like WRITE requests. Otherwise we would
+Any REQ_OP_DISCARD requests are treated like WRITE requests. Otherwise we would
have all the DISCARD requests, and then the WRITE requests and then the FLUSH
request. Consider the following example:
diff --git a/Documentation/devicetree/00-INDEX b/Documentation/devicetree/00-INDEX
deleted file mode 100644
index 8c4102c6a5e7..000000000000
--- a/Documentation/devicetree/00-INDEX
+++ /dev/null
@@ -1,12 +0,0 @@
-Documentation for device trees, a data structure by which bootloaders pass
-hardware layout to Linux in a device-independent manner, simplifying hardware
-probing. This subsystem is maintained by Grant Likely
-<grant.likely@secretlab.ca> and has a mailing list at
-https://lists.ozlabs.org/listinfo/devicetree-discuss
-
-00-INDEX
- - this file
-booting-without-of.txt
- - Booting Linux without Open Firmware, describes history and format of device trees.
-usage-model.txt
- - How Linux uses DT and what DT aims to solve. \ No newline at end of file
diff --git a/Documentation/devicetree/bindings/arm/al,alpine.txt b/Documentation/devicetree/bindings/arm/al,alpine.txt
index f404a4f9b165..d00debe2e86f 100644
--- a/Documentation/devicetree/bindings/arm/al,alpine.txt
+++ b/Documentation/devicetree/bindings/arm/al,alpine.txt
@@ -14,75 +14,3 @@ compatible: must contain "al,alpine"
...
}
-
-* CPU node:
-
-The Alpine platform includes cortex-a15 cores.
-enable-method: must be "al,alpine-smp" to allow smp [1]
-
-Example:
-
-cpus {
- #address-cells = <1>;
- #size-cells = <0>;
- enable-method = "al,alpine-smp";
-
- cpu@0 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <0>;
- };
-
- cpu@1 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <1>;
- };
-
- cpu@2 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <2>;
- };
-
- cpu@3 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <3>;
- };
-};
-
-
-* Alpine CPU resume registers
-
-The CPU resume register are used to define required resume address after
-reset.
-
-Properties:
-- compatible : Should contain "al,alpine-cpu-resume".
-- reg : Offset and length of the register set for the device
-
-Example:
-
-cpu_resume {
- compatible = "al,alpine-cpu-resume";
- reg = <0xfbff5ed0 0x30>;
-};
-
-* Alpine System-Fabric Service Registers
-
-The System-Fabric Service Registers allow various operation on CPU and
-system fabric, like powering CPUs off.
-
-Properties:
-- compatible : Should contain "al,alpine-sysfabric-service" and "syscon".
-- reg : Offset and length of the register set for the device
-
-Example:
-
-nb_service {
- compatible = "al,alpine-sysfabric-service", "syscon";
- reg = <0xfb070000 0x10000>;
-};
-
-[1] arm/cpu-enable-method/al,alpine-smp
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index b5c2b5c35766..4498292b833d 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -57,12 +57,17 @@ Boards with the Amlogic Meson AXG A113D SoC shall have the following properties:
Required root node property:
compatible: "amlogic,a113d", "amlogic,meson-axg";
+Boards with the Amlogic Meson G12A S905D2 SoC shall have the following properties:
+ Required root node property:
+ compatible: "amlogic,g12a";
+
Board compatible values (alphabetically, grouped by SoC):
- "geniatech,atv1200" (Meson6)
- "minix,neo-x8" (Meson8)
+ - "endless,ec100" (Meson8b)
- "hardkernel,odroid-c1" (Meson8b)
- "tronfy,mxq" (Meson8b)
@@ -101,6 +106,8 @@ Board compatible values (alphabetically, grouped by SoC):
- "amlogic,s400" (Meson axg a113d)
+ - "amlogic,u200" (Meson g12a s905d2)
+
Amlogic Meson Firmware registers Interface
------------------------------------------
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index 31220b54d85d..4bf1b4da7659 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -70,173 +70,3 @@ compatible: must be one of:
- "atmel,samv71q19"
- "atmel,samv71q20"
- "atmel,samv71q21"
-
-Chipid required properties:
-- compatible: Should be "atmel,sama5d2-chipid"
-- reg : Should contain registers location and length
-
-PIT Timer required properties:
-- compatible: Should be "atmel,at91sam9260-pit"
-- reg: Should contain registers location and length
-- interrupts: Should contain interrupt for the PIT which is the IRQ line
- shared across all System Controller members.
-
-System Timer (ST) required properties:
-- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
-- reg: Should contain registers location and length
-- interrupts: Should contain interrupt for the ST which is the IRQ line
- shared across all System Controller members.
-- clocks: phandle to input clock.
-Its subnodes can be:
-- watchdog: compatible should be "atmel,at91rm9200-wdt"
-
-RSTC Reset Controller required properties:
-- compatible: Should be "atmel,<chip>-rstc".
- <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
-- reg: Should contain registers location and length
-- clocks: phandle to input clock.
-
-Example:
-
- rstc@fffffd00 {
- compatible = "atmel,at91sam9260-rstc";
- reg = <0xfffffd00 0x10>;
- clocks = <&clk32k>;
- };
-
-RAMC SDRAM/DDR Controller required properties:
-- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
- "atmel,at91sam9260-sdramc",
- "atmel,at91sam9g45-ddramc",
- "atmel,sama5d3-ddramc",
-- reg: Should contain registers location and length
-
-Examples:
-
- ramc0: ramc@ffffe800 {
- compatible = "atmel,at91sam9g45-ddramc";
- reg = <0xffffe800 0x200>;
- };
-
-SHDWC Shutdown Controller
-
-required properties:
-- compatible: Should be "atmel,<chip>-shdwc".
- <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
-- reg: Should contain registers location and length
-- clocks: phandle to input clock.
-
-optional properties:
-- atmel,wakeup-mode: String, operation mode of the wakeup mode.
- Supported values are: "none", "high", "low", "any".
-- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
-
-optional at91sam9260 properties:
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-optional at91sam9rl properties:
-- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-optional at91sam9x5 properties:
-- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
-
-Example:
-
- shdwc@fffffd10 {
- compatible = "atmel,at91sam9260-shdwc";
- reg = <0xfffffd10 0x10>;
- clocks = <&clk32k>;
- };
-
-SHDWC SAMA5D2-Compatible Shutdown Controller
-
-1) shdwc node
-
-required properties:
-- compatible: should be "atmel,sama5d2-shdwc".
-- reg: should contain registers location and length
-- clocks: phandle to input clock.
-- #address-cells: should be one. The cell is the wake-up input index.
-- #size-cells: should be zero.
-
-optional properties:
-
-- debounce-delay-us: minimum wake-up inputs debouncer period in
- microseconds. It's usually a board-related property.
-- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
-
-The node contains child nodes for each wake-up input that the platform uses.
-
-2) input nodes
-
-Wake-up input nodes are usually described in the "board" part of the Device
-Tree. Note also that input 0 is linked to the wake-up pin and is frequently
-used.
-
-Required properties:
-- reg: should contain the wake-up input index [0 - 15].
-
-Optional properties:
-- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
- by the child, forces the wake-up of the core power supply on a high level.
- The default is to be active low.
-
-Example:
-
-On the SoC side:
- shdwc@f8048010 {
- compatible = "atmel,sama5d2-shdwc";
- reg = <0xf8048010 0x10>;
- clocks = <&clk32k>;
- #address-cells = <1>;
- #size-cells = <0>;
- atmel,wakeup-rtc-timer;
- };
-
-On the board side:
- shdwc@f8048010 {
- debounce-delay-us = <976>;
-
- input@0 {
- reg = <0>;
- };
-
- input@1 {
- reg = <1>;
- atmel,wakeup-active-high;
- };
- };
-
-Special Function Registers (SFR)
-
-Special Function Registers (SFR) manage specific aspects of the integrated
-memory, bridge implementations, processor and other functionality not controlled
-elsewhere.
-
-required properties:
-- compatible: Should be "atmel,<chip>-sfr", "syscon" or
- "atmel,<chip>-sfrbu", "syscon"
- <chip> can be "sama5d3", "sama5d4" or "sama5d2".
-- reg: Should contain registers location and length
-
- sfr@f0038000 {
- compatible = "atmel,sama5d3-sfr", "syscon";
- reg = <0xf0038000 0x60>;
- };
-
-Security Module (SECUMOD)
-
-The Security Module macrocell provides all necessary secure functions to avoid
-voltage, temperature, frequency and mechanical attacks on the chip. It also
-embeds secure memories that can be scrambled
-
-required properties:
-- compatible: Should be "atmel,<chip>-secumod", "syscon".
- <chip> can be "sama5d2".
-- reg: Should contain registers location and length
-
- secumod@fc040000 {
- compatible = "atmel,sama5d2-secumod", "syscon";
- reg = <0xfc040000 0x100>;
- };
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
new file mode 100644
index 000000000000..4b96608ad692
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -0,0 +1,171 @@
+Atmel system registers
+
+Chipid required properties:
+- compatible: Should be "atmel,sama5d2-chipid"
+- reg : Should contain registers location and length
+
+PIT Timer required properties:
+- compatible: Should be "atmel,at91sam9260-pit"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt for the PIT which is the IRQ line
+ shared across all System Controller members.
+
+System Timer (ST) required properties:
+- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt for the ST which is the IRQ line
+ shared across all System Controller members.
+- clocks: phandle to input clock.
+Its subnodes can be:
+- watchdog: compatible should be "atmel,at91rm9200-wdt"
+
+RSTC Reset Controller required properties:
+- compatible: Should be "atmel,<chip>-rstc".
+ <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
+- reg: Should contain registers location and length
+- clocks: phandle to input clock.
+
+Example:
+
+ rstc@fffffd00 {
+ compatible = "atmel,at91sam9260-rstc";
+ reg = <0xfffffd00 0x10>;
+ clocks = <&clk32k>;
+ };
+
+RAMC SDRAM/DDR Controller required properties:
+- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
+ "atmel,at91sam9260-sdramc",
+ "atmel,at91sam9g45-ddramc",
+ "atmel,sama5d3-ddramc",
+- reg: Should contain registers location and length
+
+Examples:
+
+ ramc0: ramc@ffffe800 {
+ compatible = "atmel,at91sam9g45-ddramc";
+ reg = <0xffffe800 0x200>;
+ };
+
+SHDWC Shutdown Controller
+
+required properties:
+- compatible: Should be "atmel,<chip>-shdwc".
+ <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
+- reg: Should contain registers location and length
+- clocks: phandle to input clock.
+
+optional properties:
+- atmel,wakeup-mode: String, operation mode of the wakeup mode.
+ Supported values are: "none", "high", "low", "any".
+- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
+
+optional at91sam9260 properties:
+- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
+
+optional at91sam9rl properties:
+- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
+- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
+
+optional at91sam9x5 properties:
+- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
+
+Example:
+
+ shdwc@fffffd10 {
+ compatible = "atmel,at91sam9260-shdwc";
+ reg = <0xfffffd10 0x10>;
+ clocks = <&clk32k>;
+ };
+
+SHDWC SAMA5D2-Compatible Shutdown Controller
+
+1) shdwc node
+
+required properties:
+- compatible: should be "atmel,sama5d2-shdwc".
+- reg: should contain registers location and length
+- clocks: phandle to input clock.
+- #address-cells: should be one. The cell is the wake-up input index.
+- #size-cells: should be zero.
+
+optional properties:
+
+- debounce-delay-us: minimum wake-up inputs debouncer period in
+ microseconds. It's usually a board-related property.
+- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
+
+The node contains child nodes for each wake-up input that the platform uses.
+
+2) input nodes
+
+Wake-up input nodes are usually described in the "board" part of the Device
+Tree. Note also that input 0 is linked to the wake-up pin and is frequently
+used.
+
+Required properties:
+- reg: should contain the wake-up input index [0 - 15].
+
+Optional properties:
+- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
+ by the child, forces the wake-up of the core power supply on a high level.
+ The default is to be active low.
+
+Example:
+
+On the SoC side:
+ shdwc@f8048010 {
+ compatible = "atmel,sama5d2-shdwc";
+ reg = <0xf8048010 0x10>;
+ clocks = <&clk32k>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ atmel,wakeup-rtc-timer;
+ };
+
+On the board side:
+ shdwc@f8048010 {
+ debounce-delay-us = <976>;
+
+ input@0 {
+ reg = <0>;
+ };
+
+ input@1 {
+ reg = <1>;
+ atmel,wakeup-active-high;
+ };
+ };
+
+Special Function Registers (SFR)
+
+Special Function Registers (SFR) manage specific aspects of the integrated
+memory, bridge implementations, processor and other functionality not controlled
+elsewhere.
+
+required properties:
+- compatible: Should be "atmel,<chip>-sfr", "syscon" or
+ "atmel,<chip>-sfrbu", "syscon"
+ <chip> can be "sama5d3", "sama5d4" or "sama5d2".
+- reg: Should contain registers location and length
+
+ sfr@f0038000 {
+ compatible = "atmel,sama5d3-sfr", "syscon";
+ reg = <0xf0038000 0x60>;
+ };
+
+Security Module (SECUMOD)
+
+The Security Module macrocell provides all necessary secure functions to avoid
+voltage, temperature, frequency and mechanical attacks on the chip. It also
+embeds secure memories that can be scrambled
+
+required properties:
+- compatible: Should be "atmel,<chip>-secumod", "syscon".
+ <chip> can be "sama5d2".
+- reg: Should contain registers location and length
+
+ secumod@fc040000 {
+ compatible = "atmel,sama5d2-secumod", "syscon";
+ reg = <0xfc040000 0x100>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
index 1e3e29a545e2..0dcc3ea5adff 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
@@ -42,6 +42,14 @@ Raspberry Pi Compute Module
Required root node properties:
compatible = "raspberrypi,compute-module", "brcm,bcm2835";
+Raspberry Pi Compute Module 3
+Required root node properties:
+compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
+
+Raspberry Pi Compute Module 3 Lite
+Required root node properties:
+compatible = "raspberrypi,3-compute-module-lite", "brcm,bcm2837";
+
Raspberry Pi Zero
Required root node properties:
compatible = "raspberrypi,model-zero", "brcm,bcm2835";
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index 5d1ad09bafb4..f8aff65ab921 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -54,9 +54,7 @@ its hardware characteristcs.
clocks the core of that coresight component. The latter clock
is optional.
- * port or ports: The representation of the component's port
- layout using the generic DT graph presentation found in
- "bindings/graph.txt".
+ * port or ports: see "Graph bindings for Coresight" below.
* Additional required properties for System Trace Macrocells (STM):
* reg: along with the physical base address and length of the register
@@ -73,7 +71,7 @@ its hardware characteristcs.
AMBA markee):
- "arm,coresight-replicator"
- * port or ports: same as above.
+ * port or ports: see "Graph bindings for Coresight" below.
* Optional properties for ETM/PTMs:
@@ -96,6 +94,20 @@ its hardware characteristcs.
* interrupts : Exactly one SPI may be listed for reporting the address
error
+Graph bindings for Coresight
+-------------------------------
+
+Coresight components are interconnected to create a data path for the flow of
+trace data generated from the "sources" to their collection points "sink".
+Each coresight component must describe the "input" and "output" connections.
+The connections must be described via generic DT graph bindings as described
+by the "bindings/graph.txt", where each "port" along with an "endpoint"
+component represents a hardware port and the connection.
+
+ * All output ports must be listed inside a child node named "out-ports"
+ * All input ports must be listed inside a child node named "in-ports".
+ * Port address must match the hardware port number.
+
Example:
1. Sinks
@@ -105,10 +117,11 @@ Example:
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- etb_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ etb_in_port: endpoint@0 {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
@@ -119,10 +132,11 @@ Example:
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- tpiu_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint@0 {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
@@ -133,22 +147,16 @@ Example:
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* input port */
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etr_in_port: endpoint {
- slave-mode;
remote-endpoint = <&replicator2_out_port0>;
};
};
+ };
- /* CATU link represented by output port */
- port@1 {
- reg = <1>;
+ out-ports {
+ port {
etr_out_port: endpoint {
remote-endpoint = <&catu_in_port>;
};
@@ -163,7 +171,7 @@ Example:
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -181,12 +189,11 @@ Example:
remote-endpoint = <&tpiu_in_port>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel_out_port0>;
};
};
@@ -199,40 +206,36 @@ Example:
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel_out_port0: endpoint {
remote-endpoint =
<&replicator_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm0_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm1_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out_port>;
};
};
@@ -248,9 +251,11 @@ Example:
cpu = <&cpu0>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- ptm0_out_port: endpoint {
- remote-endpoint = <&funnel_in_port0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
};
};
};
@@ -262,9 +267,11 @@ Example:
cpu = <&cpu1>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- port {
- ptm1_out_port: endpoint {
- remote-endpoint = <&funnel_in_port1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
};
};
};
@@ -278,9 +285,11 @@ Example:
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
- port {
- stm_out_port: endpoint {
- remote-endpoint = <&main_funnel_in_port2>;
+ out-ports {
+ port {
+ stm_out_port: endpoint {
+ remote-endpoint = <&main_funnel_in_port2>;
+ };
};
};
};
@@ -295,10 +304,11 @@ Example:
clock-names = "apb_pclk";
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- port {
- catu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&etr_out_port>;
+ in-ports {
+ port {
+ catu_in_port: endpoint {
+ remote-endpoint = <&etr_out_port>;
+ };
};
};
};
diff --git a/Documentation/devicetree/bindings/arm/cpu-capacity.txt b/Documentation/devicetree/bindings/arm/cpu-capacity.txt
index 9b5685a1d15d..84262cdb8d29 100644
--- a/Documentation/devicetree/bindings/arm/cpu-capacity.txt
+++ b/Documentation/devicetree/bindings/arm/cpu-capacity.txt
@@ -59,9 +59,11 @@ mhz values (normalized w.r.t. the highest value found while parsing the DT).
===========================================
Example 1 (ARM 64-bit, 6-cpu system, two clusters):
-capacities-dmips-mhz are scaled w.r.t. 1024 (cpu@0 and cpu@1)
-supposing cluster0@max-freq=1100 and custer1@max-freq=850,
-final capacities are 1024 for cluster0 and 446 for cluster1
+The capacities-dmips-mhz or DMIPS/MHz values (scaled to 1024)
+are 1024 and 578 for cluster0 and cluster1. Further normalization
+is done by the operating system based on cluster0@max-freq=1100 and
+custer1@max-freq=850, final capacities are 1024 for cluster0 and
+446 for cluster1 (576*850/1100).
cpus {
#address-cells = <2>;
diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp
index c2e0cc5e4cfd..35e5afb6d9ad 100644
--- a/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp
+++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp
@@ -14,7 +14,28 @@ Related properties: (none)
Note:
This enable method requires valid nodes compatible with
-"al,alpine-cpu-resume" and "al,alpine-nb-service"[1].
+"al,alpine-cpu-resume" and "al,alpine-nb-service".
+
+
+* Alpine CPU resume registers
+
+The CPU resume register are used to define required resume address after
+reset.
+
+Properties:
+- compatible : Should contain "al,alpine-cpu-resume".
+- reg : Offset and length of the register set for the device
+
+
+* Alpine System-Fabric Service Registers
+
+The System-Fabric Service Registers allow various operation on CPU and
+system fabric, like powering CPUs off.
+
+Properties:
+- compatible : Should contain "al,alpine-sysfabric-service" and "syscon".
+- reg : Offset and length of the register set for the device
+
Example:
@@ -48,5 +69,12 @@ cpus {
};
};
---
-[1] arm/al,alpine.txt
+cpu_resume {
+ compatible = "al,alpine-cpu-resume";
+ reg = <0xfbff5ed0 0x30>;
+};
+
+nb_service {
+ compatible = "al,alpine-sysfabric-service", "syscon";
+ reg = <0xfb070000 0x10000>;
+};
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 96dfccc0faa8..b0198a1cf403 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -276,7 +276,7 @@ described below.
Usage: optional
Value type: <prop-encoded-array>
Definition: A u32 value that represents the running time dynamic
- power coefficient in units of mW/MHz/uV^2. The
+ power coefficient in units of uW/MHz/V^2. The
coefficient can either be calculated from power
measurements or derived by analysis.
@@ -287,7 +287,7 @@ described below.
Pdyn = dynamic-power-coefficient * V^2 * f
- where voltage is in uV, frequency is in MHz.
+ where voltage is in V, frequency is in MHz.
Example 1 (dual-cluster big.LITTLE system 32-bit):
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt
new file mode 100644
index 000000000000..b5cb374dc47d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt
@@ -0,0 +1,19 @@
+Freescale DCFG
+
+DCFG is the device configuration unit, that provides general purpose
+configuration and status for the device. Such as setting the secondary
+core start address and release the secondary core from holdoff and startup.
+
+Required properties:
+ - compatible: Should contain a chip-specific compatible string,
+ Chip-specific strings are of the form "fsl,<chip>-dcfg",
+ The following <chip>s are known to be supported:
+ ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
+
+ - reg : should contain base address and length of DCFG memory-mapped registers
+
+Example:
+ dcfg: dcfg@1ee0000 {
+ compatible = "fsl,ls1021a-dcfg";
+ reg = <0x0 0x1ee0000 0x0 0x10000>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt
new file mode 100644
index 000000000000..0ab67b0b216d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt
@@ -0,0 +1,19 @@
+Freescale SCFG
+
+SCFG is the supplemental configuration unit, that provides SoC specific
+configuration and status registers for the chip. Such as getting PEX port
+status.
+
+Required properties:
+ - compatible: Should contain a chip-specific compatible string,
+ Chip-specific strings are of the form "fsl,<chip>-scfg",
+ The following <chip>s are known to be supported:
+ ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
+
+ - reg: should contain base address and length of SCFG memory-mapped registers
+
+Example:
+ scfg: scfg@1570000 {
+ compatible = "fsl,ls1021a-scfg";
+ reg = <0x0 0x1570000 0x0 0x10000>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
new file mode 100644
index 000000000000..46d0af1f0872
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -0,0 +1,183 @@
+NXP i.MX System Controller Firmware (SCFW)
+--------------------------------------------------------------------
+
+The System Controller Firmware (SCFW) is a low-level system function
+which runs on a dedicated Cortex-M core to provide power, clock, and
+resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
+(QM, QP), and i.MX8QX (QXP, DX).
+
+The AP communicates with the SC using a multi-ported MU module found
+in the LSIO subsystem. The current definition of this MU module provides
+5 remote AP connections to the SC to support up to 5 execution environments
+(TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces
+with the LSIO DSC IP bus. The SC firmware will communicate with this MU
+using the MSI bus.
+
+System Controller Device Node:
+============================================================
+
+The scu node with the following properties shall be under the /firmware/ node.
+
+Required properties:
+-------------------
+- compatible: should be "fsl,imx-scu".
+- mbox-names: should include "tx0", "tx1", "tx2", "tx3",
+ "rx0", "rx1", "rx2", "rx3".
+- mboxes: List of phandle of 4 MU channels for tx and 4 MU channels
+ for rx. All 8 MU channels must be in the same MU instance.
+ Cross instances are not allowed. The MU instance can only
+ be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users need
+ to make sure use the one which is not conflict with other
+ execution environments. e.g. ATF.
+ Note:
+ Channel 0 must be "tx0" or "rx0".
+ Channel 1 must be "tx1" or "rx1".
+ Channel 2 must be "tx2" or "rx2".
+ Channel 3 must be "tx3" or "rx3".
+ e.g.
+ mboxes = <&lsio_mu1 0 0
+ &lsio_mu1 0 1
+ &lsio_mu1 0 2
+ &lsio_mu1 0 3
+ &lsio_mu1 1 0
+ &lsio_mu1 1 1
+ &lsio_mu1 1 2
+ &lsio_mu1 1 3>;
+ See Documentation/devicetree/bindings/mailbox/fsl,mu.txt
+ for detailed mailbox binding.
+
+i.MX SCU Client Device Node:
+============================================================
+
+Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+Power domain bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+This binding for the SCU power domain providers uses the generic power
+domain binding[2].
+
+Required properties:
+- compatible: Should be "fsl,scu-pd".
+- #address-cells: Should be 1.
+- #size-cells: Should be 0.
+
+Required properties for power domain sub nodes:
+- #power-domain-cells: Must be 0.
+
+Optional Properties:
+- reg: Resource ID of this power domain.
+ No exist means uncontrollable by user.
+ See detailed Resource ID list from:
+ include/dt-bindings/power/imx-rsrc.h
+- power-domains: phandle pointing to the parent power domain.
+
+Clock bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+This binding uses the common clock binding[1].
+
+Required properties:
+- compatible: Should be "fsl,imx8qxp-clock".
+- #clock-cells: Should be 1. Contains the Clock ID value.
+- clocks: List of clock specifiers, must contain an entry for
+ each required entry in clock-names
+- clock-names: Should include entries "xtal_32KHz", "xtal_24MHz"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.
+
+See the full list of clock IDs from:
+include/dt-bindings/clock/imx8qxp-clock.h
+
+Pinctrl bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+This binding uses the i.MX common pinctrl binding[3].
+
+Required properties:
+- compatible: Should be "fsl,imx8qxp-iomuxc".
+
+Required properties for Pinctrl sub nodes:
+- fsl,pins: Each entry consists of 3 integers which represents
+ the mux and config setting for one pin. The first 2
+ integers <pin_id mux_mode> are specified using a
+ PIN_FUNC_ID macro, which can be found in
+ <dt-bindings/pinctrl/pads-imx8qxp.h>.
+ The last integer CONFIG is the pad setting value like
+ pull-up on this pin.
+
+ Please refer to i.MX8QXP Reference Manual for detailed
+ CONFIG settings.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/power/power_domain.txt
+[3] Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
+
+Example (imx8qxp):
+-------------
+lsio_mu1: mailbox@5d1c0000 {
+ ...
+ #mbox-cells = <2>;
+};
+
+firmware {
+ scu {
+ compatible = "fsl,imx-scu";
+ mbox-names = "tx0", "tx1", "tx2", "tx3",
+ "rx0", "rx1", "rx2", "rx3";
+ mboxes = <&lsio_mu1 0 0
+ &lsio_mu1 0 1
+ &lsio_mu1 0 2
+ &lsio_mu1 0 3
+ &lsio_mu1 1 0
+ &lsio_mu1 1 1
+ &lsio_mu1 1 2
+ &lsio_mu1 1 3>;
+
+ clk: clk {
+ compatible = "fsl,imx8qxp-clk";
+ #clock-cells = <1>;
+ };
+
+ iomuxc {
+ compatible = "fsl,imx8qxp-iomuxc";
+
+ pinctrl_lpuart0: lpuart0grp {
+ fsl,pins = <
+ SC_P_UART0_RX_ADMA_UART0_RX 0x06000020
+ SC_P_UART0_TX_ADMA_UART0_TX 0x06000020
+ >;
+ };
+ ...
+ };
+
+ imx8qx-pm {
+ compatible = "fsl,scu-pd";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_dma: dma-power-domain {
+ #power-domain-cells = <0>;
+
+ pd_dma_lpuart0: dma-lpuart0@57 {
+ reg = <SC_R_UART_0>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_dma>;
+ };
+ ...
+ };
+ ...
+ };
+ };
+};
+
+serial@5a060000 {
+ ...
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart0>;
+ clocks = <&clk IMX8QXP_UART0_CLK>,
+ <&clk IMX8QXP_UART0_IPG_CLK>;
+ clock-names = "per", "ipg";
+ power-domains = <&pd_dma_lpuart0>;
+};
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index 8a1baa2b9723..5074aeecd327 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -57,6 +57,50 @@ i.MX6SLL EVK board
Required root node properties:
- compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
+i.MX6 Quad Plus SABRE Smart Device Board
+Required root node properties:
+ - compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
+
+i.MX6 Quad Plus SABRE Automotive Board
+Required root node properties:
+ - compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
+
+i.MX6 DualLite SABRE Smart Device Board
+Required root node properties:
+ - compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
+
+i.MX6 DualLite/Solo SABRE Automotive Board
+Required root node properties:
+ - compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
+
+i.MX6 SoloLite EVK Board
+Required root node properties:
+ - compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
+
+i.MX6 UltraLite 14x14 EVK Board
+Required root node properties:
+ - compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
+
+i.MX6 UltraLiteLite 14x14 EVK Board
+Required root node properties:
+ - compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
+
+i.MX6 ULZ 14x14 EVK Board
+Required root node properties:
+ - compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
+
+i.MX6 SoloX SDB Board
+Required root node properties:
+ - compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
+
+i.MX6 SoloX Sabre Auto Board
+Required root node properties:
+ - compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
+
+i.MX7 SabreSD Board
+Required root node properties:
+ - compatible = "fsl,imx7d-sdb", "fsl,imx7d";
+
Generic i.MX boards
-------------------
@@ -101,45 +145,6 @@ Freescale LS1021A Platform Device Tree Bindings
Required root node compatible properties:
- compatible = "fsl,ls1021a";
-Freescale SoC-specific Device Tree Bindings
--------------------------------------------
-
-Freescale SCFG
- SCFG is the supplemental configuration unit, that provides SoC specific
-configuration and status registers for the chip. Such as getting PEX port
-status.
- Required properties:
- - compatible: Should contain a chip-specific compatible string,
- Chip-specific strings are of the form "fsl,<chip>-scfg",
- The following <chip>s are known to be supported:
- ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
-
- - reg: should contain base address and length of SCFG memory-mapped registers
-
-Example:
- scfg: scfg@1570000 {
- compatible = "fsl,ls1021a-scfg";
- reg = <0x0 0x1570000 0x0 0x10000>;
- };
-
-Freescale DCFG
- DCFG is the device configuration unit, that provides general purpose
-configuration and status for the device. Such as setting the secondary
-core start address and release the secondary core from holdoff and startup.
- Required properties:
- - compatible: Should contain a chip-specific compatible string,
- Chip-specific strings are of the form "fsl,<chip>-dcfg",
- The following <chip>s are known to be supported:
- ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
-
- - reg : should contain base address and length of DCFG memory-mapped registers
-
-Example:
- dcfg: dcfg@1ee0000 {
- compatible = "fsl,ls1021a-dcfg";
- reg = <0x0 0x1ee0000 0x0 0x10000>;
- };
-
Freescale ARMv8 based Layerscape SoC family Device Tree Bindings
----------------------------------------------------------------
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index 199cd36fe1ba..a97f643e7d1c 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -8,6 +8,14 @@ HiKey960 Board
Required root node properties:
- compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
+Hi3670 SoC
+Required root node properties:
+ - compatible = "hisilicon,hi3670";
+
+HiKey970 Board
+Required root node properties:
+ - compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670";
+
Hi3798cv200 SoC
Required root node properties:
- compatible = "hisilicon,hi3798cv200";
diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt b/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
index 31f5f9a104cc..b56a02c10ae6 100644
--- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
@@ -45,11 +45,15 @@ Optional Properties:
debug_messages - Map the Debug message region
- reg: register space corresponding to the debug_messages
- ti,system-reboot-controller: If system reboot can be triggered by SoC reboot
+- ti,host-id: Integer value corresponding to the host ID assigned by Firmware
+ for identification of host processing entities such as virtual
+ machines
Example (K2G):
-------------
pmmc: pmmc {
compatible = "ti,k2g-sci";
+ ti,host-id = <2>;
mbox-names = "rx", "tx";
mboxes= <&msgmgr &msgmgr_proxy_pmmc_rx>,
<&msgmgr &msgmgr_proxy_pmmc_tx>;
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
index b404d592ce58..4e4a3c0ab9ab 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
@@ -10,6 +10,7 @@ Required Properties:
- "mediatek,mt2712-apmixedsys", "syscon"
- "mediatek,mt6797-apmixedsys"
- "mediatek,mt7622-apmixedsys"
+ - "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys"
- "mediatek,mt8135-apmixedsys"
- "mediatek,mt8173-apmixedsys"
- #clock-cells: Must be 1
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
index 34a69ba67f13..d1606b2c3e63 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
@@ -8,6 +8,7 @@ Required Properties:
- compatible: Should be one of:
- "mediatek,mt2701-audsys", "syscon"
- "mediatek,mt7622-audsys", "syscon"
+ - "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon"
- #clock-cells: Must be 1
The AUDSYS controller uses the common clk binding from
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt
index 4010e37c53a0..149567a38215 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt
@@ -8,6 +8,7 @@ Required Properties:
- compatible: Should be:
- "mediatek,mt2701-bdpsys", "syscon"
- "mediatek,mt2712-bdpsys", "syscon"
+ - "mediatek,mt7623-bdpsys", "mediatek,mt2701-bdpsys", "syscon"
- #clock-cells: Must be 1
The bdpsys controller uses the common clk binding from
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
index 8f5335b480ac..f17cfe64255d 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
@@ -8,6 +8,7 @@ Required Properties:
- compatible: Should be:
- "mediatek,mt2701-ethsys", "syscon"
- "mediatek,mt7622-ethsys", "syscon"
+ - "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
- #clock-cells: Must be 1
- #reset-cells: Must be 1
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt
index f5629d64cef2..323905af82c3 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt
@@ -9,6 +9,7 @@ Required Properties:
- compatible: Should be:
- "mediatek,mt2701-hifsys", "syscon"
- "mediatek,mt7622-hifsys", "syscon"
+ - "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", "syscon"
- #clock-cells: Must be 1
The hifsys controller uses the common clk binding from
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
index 868bd51a98be..3f99672163e3 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
@@ -9,6 +9,7 @@ Required Properties:
- "mediatek,mt2701-imgsys", "syscon"
- "mediatek,mt2712-imgsys", "syscon"
- "mediatek,mt6797-imgsys", "syscon"
+ - "mediatek,mt7623-imgsys", "mediatek,mt2701-imgsys", "syscon"
- "mediatek,mt8173-imgsys", "syscon"
- #clock-cells: Must be 1
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
index 566f153f9f83..89f4272a1441 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
@@ -11,6 +11,7 @@ Required Properties:
- "mediatek,mt2712-infracfg", "syscon"
- "mediatek,mt6797-infracfg", "syscon"
- "mediatek,mt7622-infracfg", "syscon"
+ - "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon"
- "mediatek,mt8135-infracfg", "syscon"
- "mediatek,mt8173-infracfg", "syscon"
- #clock-cells: Must be 1
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
index 4eb8bbe15c01..15d977afad31 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
@@ -9,6 +9,7 @@ Required Properties:
- "mediatek,mt2701-mmsys", "syscon"
- "mediatek,mt2712-mmsys", "syscon"
- "mediatek,mt6797-mmsys", "syscon"
+ - "mediatek,mt7623-mmsys", "mediatek,mt2701-mmsys", "syscon"
- "mediatek,mt8173-mmsys", "syscon"
- #clock-cells: Must be 1
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
index fb58ca8c2770..6755514deb80 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
@@ -10,6 +10,7 @@ Required Properties:
- "mediatek,mt2701-pericfg", "syscon"
- "mediatek,mt2712-pericfg", "syscon"
- "mediatek,mt7622-pericfg", "syscon"
+ - "mediatek,mt7623-pericfg", "mediatek,mt2701-pericfg", "syscon"
- "mediatek,mt8135-pericfg", "syscon"
- "mediatek,mt8173-pericfg", "syscon"
- #clock-cells: Must be 1
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
index 24014a7e2332..d849465b8c99 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
@@ -10,6 +10,7 @@ Required Properties:
- "mediatek,mt2712-topckgen", "syscon"
- "mediatek,mt6797-topckgen"
- "mediatek,mt7622-topckgen"
+ - "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen"
- "mediatek,mt8135-topckgen"
- "mediatek,mt8173-topckgen"
- #clock-cells: Must be 1
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
index ea40d05089f8..3212afc753c8 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
@@ -9,6 +9,7 @@ Required Properties:
- "mediatek,mt2701-vdecsys", "syscon"
- "mediatek,mt2712-vdecsys", "syscon"
- "mediatek,mt6797-vdecsys", "syscon"
+ - "mediatek,mt7623-vdecsys", "mediatek,mt2701-vdecsys", "syscon"
- "mediatek,mt8173-vdecsys", "syscon"
- #clock-cells: Must be 1
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
index 1333db9acfee..7f696362a4a1 100644
--- a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
@@ -21,10 +21,29 @@ PROPERTIES
the register region. An optional second element specifies
the base address and size of the alias register region.
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: reference to the pll parents.
+
+- clock-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "pll8_vote", "pxo".
+
+- clock-output-names:
+ Usage: optional
+ Value type: <string>
+ Definition: Name of the output clock. Typically acpuX_aux where X is a
+ CPU number starting at 0.
+
Example:
clock-controller@2088000 {
compatible = "qcom,kpss-acc-v2";
reg = <0x02088000 0x1000>,
<0x02008000 0x1000>;
+ clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>;
+ clock-names = "pll8_vote", "pxo";
+ clock-output-names = "acpu0_aux";
};
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
new file mode 100644
index 000000000000..e628758950e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
@@ -0,0 +1,44 @@
+Krait Processor Sub-system (KPSS) Global Clock Controller (GCC)
+
+PROPERTIES
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: should be one of the following. The generic compatible
+ "qcom,kpss-gcc" should also be included.
+ "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc"
+ "qcom,kpss-gcc-apq8064", "qcom,kpss-gcc"
+ "qcom,kpss-gcc-msm8974", "qcom,kpss-gcc"
+ "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: base address and size of the register region
+
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: reference to the pll parents.
+
+- clock-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "pll8_vote", "pxo".
+
+- clock-output-names:
+ Usage: required
+ Value type: <string>
+ Definition: Name of the output clock. Typically acpu_l2_aux indicating
+ an L2 cache auxiliary clock.
+
+Example:
+
+ l2cc: clock-controller@2011000 {
+ compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc";
+ reg = <0x2011000 0x1000>;
+ clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>;
+ clock-names = "pll8_vote", "pxo";
+ clock-output-names = "acpu_l2_aux";
+ };
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
index 5e85749262ae..eaee06b2d8f2 100644
--- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
@@ -16,11 +16,26 @@ Properties:
- reg:
Usage: required
Value Type: <prop-encoded-array>
- Definition: Start address and the the size of the register region.
+ Definition: The first element specifies the llcc base start address and
+ the size of the register region. The second element specifies
+ the llcc broadcast base address and size of the register region.
+
+- reg-names:
+ Usage: required
+ Value Type: <stringlist>
+ Definition: Register region names. Must be "llcc_base", "llcc_broadcast_base".
+
+- interrupts:
+ Usage: required
+ Definition: The interrupt is associated with the llcc edac device.
+ It's used for llcc cache single and double bit error detection
+ and reporting.
Example:
cache-controller@1100000 {
compatible = "qcom,sdm845-llcc";
- reg = <0x1100000 0x250000>;
+ reg = <0x1100000 0x200000>, <0x1300000 0x50000> ;
+ reg-names = "llcc_base", "llcc_broadcast_base";
+ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index acfd3c773dd0..0cc71236d639 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -5,6 +5,10 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "vamrs,ficus", "rockchip,rk3399";
+- 96boards RK3399 Rock960 (ROCK960 Consumer Edition)
+ Required root node properties:
+ - compatible = "vamrs,rock960", "rockchip,rk3399";
+
- Amarula Vyasa RK3288 board
Required root node properties:
- compatible = "amarula,vyasa-rk3288", "rockchip,rk3288";
@@ -13,6 +17,10 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "asus,rk3288-tinker", "rockchip,rk3288";
+- Asus Tinker board S
+ Required root node properties:
+ - compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
+
- Kylin RK3036 board:
Required root node properties:
- compatible = "rockchip,kylin-rk3036", "rockchip,rk3036";
@@ -59,6 +67,10 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
+- Firefly ROC-RK3399-PC board:
+ Required root node properties:
+ - compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+
- ChipSPARK PopMetal-RK3288 board:
Required root node properties:
- compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
@@ -160,6 +172,10 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "pine64,rock64", "rockchip,rk3328";
+- Pine64 RockPro64 board:
+ Required root node properties:
+ - compatible = "pine64,rockpro64", "rockchip,rk3399";
+
- Rockchip PX3 Evaluation board:
Required root node properties:
- compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
@@ -168,6 +184,10 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
+- Rockchip PX30 Evaluation board:
+ Required root node properties:
+ - compatible = "rockchip,px30-evb", "rockchip,px30";
+
- Rockchip RV1108 Evaluation board
Required root node properties:
- compatible = "rockchip,rv1108-evb", "rockchip,rv1108";
diff --git a/Documentation/devicetree/bindings/arm/scu.txt b/Documentation/devicetree/bindings/arm/scu.txt
index 08a587875996..74d0a780ce51 100644
--- a/Documentation/devicetree/bindings/arm/scu.txt
+++ b/Documentation/devicetree/bindings/arm/scu.txt
@@ -22,7 +22,7 @@ References:
Example:
-scu@a04100000 {
+scu@a0410000 {
compatible = "arm,cortex-a9-scu";
reg = <0xa0410000 0x100>;
};
diff --git a/Documentation/devicetree/bindings/arm/secure.txt b/Documentation/devicetree/bindings/arm/secure.txt
index e31303fb233a..f27bbff2c780 100644
--- a/Documentation/devicetree/bindings/arm/secure.txt
+++ b/Documentation/devicetree/bindings/arm/secure.txt
@@ -32,7 +32,8 @@ describe the view of Secure world using the standard bindings. These
secure- bindings only need to be used where both the Secure and Normal
world views need to be described in a single device tree.
-Valid Secure world properties:
+Valid Secure world properties
+-----------------------------
- secure-status : specifies whether the device is present and usable
in the secure world. The combination of this with "status" allows
@@ -51,3 +52,19 @@ Valid Secure world properties:
status = "disabled"; secure-status = "okay"; /* S-only */
status = "disabled"; /* disabled in both */
status = "disabled"; secure-status = "disabled"; /* disabled in both */
+
+The secure-chosen node
+----------------------
+
+Similar to the /chosen node which serves as a place for passing data
+between firmware and the operating system, the /secure-chosen node may
+be used to pass data to the Secure OS. Only the properties defined
+below may appear in the /secure-chosen node.
+
+- stdout-path : specifies the device to be used by the Secure OS for
+ its console output. The syntax is the same as for /chosen/stdout-path.
+ If the /secure-chosen node exists but the stdout-path property is not
+ present, the Secure OS should not perform any console output. If
+ /secure-chosen does not exist, the Secure OS should use the value of
+ /chosen/stdout-path instead (that is, use the same device as the
+ Normal world OS).
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 89b4a389fbc7..f5e0f82fd503 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -7,6 +7,8 @@ SoCs:
compatible = "renesas,emev2"
- RZ/A1H (R7S72100)
compatible = "renesas,r7s72100"
+ - RZ/A2 (R7S9210)
+ compatible = "renesas,r7s9210"
- SH-Mobile AG5 (R8A73A00/SH73A0)
compatible = "renesas,sh73a0"
- R-Mobile APE6 (R8A73A40)
@@ -23,6 +25,10 @@ SoCs:
compatible = "renesas,r8a7745"
- RZ/G1C (R8A77470)
compatible = "renesas,r8a77470"
+ - RZ/G2M (R8A774A1)
+ compatible = "renesas,r8a774a1"
+ - RZ/G2E (RA8774C0)
+ compatible = "renesas,r8a774c0"
- R-Car M1A (R8A77781)
compatible = "renesas,r8a7778"
- R-Car H1 (R8A77790)
@@ -107,6 +113,8 @@ Boards:
compatible = "renesas,lager", "renesas,r8a7790"
- M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0))
compatible = "renesas,m3ulcb", "renesas,r8a7796"
+ - M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1))
+ compatible = "renesas,m3nulcb", "renesas,r8a77965"
- Marzen (R0P7779A00010S)
compatible = "renesas,marzen", "renesas,r8a7779"
- Porter (M2-LCDP)
@@ -143,12 +151,12 @@ Boards:
compatible = "renesas,wheat", "renesas,r8a7792"
-Most Renesas ARM SoCs have a Product Register that allows to retrieve SoC
-product and revision information. If present, a device node for this register
-should be added.
+Most Renesas ARM SoCs have a Product Register or Boundary Scan ID Register that
+allows to retrieve SoC product and revision information. If present, a device
+node for this register should be added.
Required properties:
- - compatible: Must be "renesas,prr".
+ - compatible: Must be "renesas,prr" or "renesas,bsid"
- reg: Base address and length of the register block.
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/syna.txt
index 3bab18409b7a..2face46a5f64 100644
--- a/Documentation/devicetree/bindings/arm/marvell/marvell,berlin.txt
+++ b/Documentation/devicetree/bindings/arm/syna.txt
@@ -1,4 +1,9 @@
-Marvell Berlin SoC Family Device Tree Bindings
+Synaptics SoC Device Tree Bindings
+
+According to https://www.synaptics.com/company/news/conexant-marvell
+Synaptics has acquired the Multimedia Solutions Business of Marvell, so
+berlin SoCs are now Synaptics' SoCs now.
+
---------------------------------------------------------------
Work in progress statement:
@@ -13,6 +18,10 @@ stable binding/ABI.
---------------------------------------------------------------
+Boards with the Synaptics AS370 SoC shall have the following properties:
+ Required root node property:
+ compatible: "syna,as370"
+
Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
shall have the following properties:
diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt
index 32f62bb7006d..c59b15f64346 100644
--- a/Documentation/devicetree/bindings/arm/tegra.txt
+++ b/Documentation/devicetree/bindings/arm/tegra.txt
@@ -47,12 +47,17 @@ board-specific compatible values:
nvidia,ventana
toradex,apalis_t30
toradex,apalis_t30-eval
+ toradex,apalis_t30-v1.1
+ toradex,apalis_t30-v1.1-eval
toradex,apalis-tk1
toradex,apalis-tk1-eval
- toradex,colibri_t20-512
+ toradex,apalis-tk1-v1.2
+ toradex,apalis-tk1-v1.2-eval
+ toradex,colibri_t20
+ toradex,colibri_t20-eval-v3
+ toradex,colibri_t20-iris
toradex,colibri_t30
toradex,colibri_t30-eval-v3
- toradex,iris
Trusted Foundations
-------------------------------------------
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
index 5a3bf7c5a7a0..c9fd6d1de57e 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
@@ -34,3 +34,96 @@ Board DTS:
pmc@c360000 {
nvidia,invert-interrupt;
};
+
+== Pad Control ==
+
+On Tegra SoCs a pad is a set of pins which are configured as a group.
+The pin grouping is a fixed attribute of the hardware. The PMC can be
+used to set pad power state and signaling voltage. A pad can be either
+in active or power down mode. The support for power state and signaling
+voltage configuration varies depending on the pad in question. 3.3 V and
+1.8 V signaling voltages are supported on pins where software
+controllable signaling voltage switching is available.
+
+Pad configurations are described with pin configuration nodes which
+are placed under the pmc node and they are referred to by the pinctrl
+client properties. For more information see
+Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
+
+The following pads are present on Tegra186:
+csia csib dsi mipi-bias
+pex-clk-bias pex-clk3 pex-clk2 pex-clk1
+usb0 usb1 usb2 usb-bias
+uart audio hsic dbg
+hdmi-dp0 hdmi-dp1 pex-cntrl sdmmc2-hv
+sdmmc4 cam dsib dsic
+dsid csic csid csie
+dsif spi ufs dmic-hv
+edp sdmmc1-hv sdmmc3-hv conn
+audio-hv ao-hv
+
+Required pin configuration properties:
+ - pins: A list of strings, each of which contains the name of a pad
+ to be configured.
+
+Optional pin configuration properties:
+ - low-power-enable: Configure the pad into power down mode
+ - low-power-disable: Configure the pad into active mode
+ - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
+ TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
+ The values are defined in
+ include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
+
+Note: The power state can be configured on all of the above pads except
+ for ao-hv. Following pads have software configurable signaling
+ voltages: sdmmc2-hv, dmic-hv, sdmmc1-hv, sdmmc3-hv, audio-hv,
+ ao-hv.
+
+Pad configuration state example:
+ pmc: pmc@7000e400 {
+ compatible = "nvidia,tegra186-pmc";
+ reg = <0 0x0c360000 0 0x10000>,
+ <0 0x0c370000 0 0x10000>,
+ <0 0x0c380000 0 0x10000>,
+ <0 0x0c390000 0 0x10000>;
+ reg-names = "pmc", "wake", "aotag", "scratch";
+
+ ...
+
+ sdmmc1_3v3: sdmmc1-3v3 {
+ pins = "sdmmc1-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc1_1v8: sdmmc1-1v8 {
+ pins = "sdmmc1-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
+
+ hdmi_off: hdmi-off {
+ pins = "hdmi";
+ low-power-enable;
+ }
+
+ hdmi_on: hdmi-on {
+ pins = "hdmi";
+ low-power-disable;
+ }
+ };
+
+Pinctrl client example:
+ sdmmc1: sdhci@3400000 {
+ ...
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc1_3v3>;
+ pinctrl-1 = <&sdmmc1_1v8>;
+ };
+
+ ...
+
+ sor0: sor@15540000 {
+ ...
+ pinctrl-0 = <&hdmi_off>;
+ pinctrl-1 = <&hdmi_on>;
+ pinctrl-names = "hdmi-on", "hdmi-off";
+ };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
index a74b37b07e5c..cb12f33a247f 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
@@ -195,3 +195,106 @@ Example:
power-domains = <&pd_audio>;
...
};
+
+== Pad Control ==
+
+On Tegra SoCs a pad is a set of pins which are configured as a group.
+The pin grouping is a fixed attribute of the hardware. The PMC can be
+used to set pad power state and signaling voltage. A pad can be either
+in active or power down mode. The support for power state and signaling
+voltage configuration varies depending on the pad in question. 3.3 V and
+1.8 V signaling voltages are supported on pins where software
+controllable signaling voltage switching is available.
+
+The pad configuration state nodes are placed under the pmc node and they
+are referred to by the pinctrl client properties. For more information
+see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
+The pad name should be used as the value of the pins property in pin
+configuration nodes.
+
+The following pads are present on Tegra124 and Tegra132:
+audio bb cam comp
+csia csb cse dsi
+dsib dsic dsid hdmi
+hsic hv lvds mipi-bias
+nand pex-bias pex-clk1 pex-clk2
+pex-cntrl sdmmc1 sdmmc3 sdmmc4
+sys_ddc uart usb0 usb1
+usb2 usb_bias
+
+The following pads are present on Tegra210:
+audio audio-hv cam csia
+csib csic csid csie
+csif dbg debug-nonao dmic
+dp dsi dsib dsic
+dsid emmc emmc2 gpio
+hdmi hsic lvds mipi-bias
+pex-bias pex-clk1 pex-clk2 pex-cntrl
+sdmmc1 sdmmc3 spi spi-hv
+uart usb0 usb1 usb2
+usb3 usb-bias
+
+Required pin configuration properties:
+ - pins: Must contain name of the pad(s) to be configured.
+
+Optional pin configuration properties:
+ - low-power-enable: Configure the pad into power down mode
+ - low-power-disable: Configure the pad into active mode
+ - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8
+ or TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
+ The values are defined in
+ include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
+
+Note: The power state can be configured on all of the Tegra124 and
+ Tegra132 pads. None of the Tegra124 or Tegra132 pads support
+ signaling voltage switching.
+
+Note: All of the listed Tegra210 pads except pex-cntrl support power
+ state configuration. Signaling voltage switching is supported on
+ following Tegra210 pads: audio, audio-hv, cam, dbg, dmic, gpio,
+ pex-cntrl, sdmmc1, sdmmc3, spi, spi-hv, and uart.
+
+Pad configuration state example:
+ pmc: pmc@7000e400 {
+ compatible = "nvidia,tegra210-pmc";
+ reg = <0x0 0x7000e400 0x0 0x400>;
+ clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
+ clock-names = "pclk", "clk32k_in";
+
+ ...
+
+ sdmmc1_3v3: sdmmc1-3v3 {
+ pins = "sdmmc1";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc1_1v8: sdmmc1-1v8 {
+ pins = "sdmmc1";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
+
+ hdmi_off: hdmi-off {
+ pins = "hdmi";
+ low-power-enable;
+ }
+
+ hdmi_on: hdmi-on {
+ pins = "hdmi";
+ low-power-disable;
+ }
+ };
+
+Pinctrl client example:
+ sdmmc1: sdhci@700b0000 {
+ ...
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc1_3v3>;
+ pinctrl-1 = <&sdmmc1_1v8>;
+ };
+ ...
+ sor@54540000 {
+ ...
+ pinctrl-0 = <&hdmi_off>;
+ pinctrl-1 = <&hdmi_on>;
+ pinctrl-names = "hdmi-on", "hdmi-off";
+ };
diff --git a/Documentation/devicetree/bindings/arm/ux500/boards.txt b/Documentation/devicetree/bindings/arm/ux500/boards.txt
index 0fa429534f49..89408de55bfd 100644
--- a/Documentation/devicetree/bindings/arm/ux500/boards.txt
+++ b/Documentation/devicetree/bindings/arm/ux500/boards.txt
@@ -60,7 +60,7 @@ Example:
<0xa0410100 0x100>;
};
- scu@a04100000 {
+ scu@a0410000 {
compatible = "arm,cortex-a9-scu";
reg = <0xa0410000 0x100>;
};
diff --git a/Documentation/devicetree/bindings/arm/zte,sysctrl.txt b/Documentation/devicetree/bindings/arm/zte,sysctrl.txt
new file mode 100644
index 000000000000..7e66b7f7ba96
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/zte,sysctrl.txt
@@ -0,0 +1,30 @@
+ZTE sysctrl Registers
+
+Registers for 'zte,zx296702' SoC:
+
+System management required properties:
+ - compatible = "zte,sysctrl"
+
+Low power management required properties:
+ - compatible = "zte,zx296702-pcu"
+
+Bus matrix required properties:
+ - compatible = "zte,zx-bus-matrix"
+
+
+Registers for 'zte,zx296718' SoC:
+
+System management required properties:
+ - compatible = "zte,zx296718-aon-sysctrl"
+ - compatible = "zte,zx296718-sysctrl"
+
+Example:
+aon_sysctrl: aon-sysctrl@116000 {
+ compatible = "zte,zx296718-aon-sysctrl", "syscon";
+ reg = <0x116000 0x1000>;
+};
+
+sysctrl: sysctrl@1463000 {
+ compatible = "zte,zx296718-sysctrl", "syscon";
+ reg = <0x1463000 0x1000>;
+};
diff --git a/Documentation/devicetree/bindings/arm/zte.txt b/Documentation/devicetree/bindings/arm/zte.txt
index 83369785d29c..340612794a37 100644
--- a/Documentation/devicetree/bindings/arm/zte.txt
+++ b/Documentation/devicetree/bindings/arm/zte.txt
@@ -1,20 +1,10 @@
ZTE platforms device tree bindings
----------------------------------------
+---------------------------------------
- ZX296702 board:
Required root node properties:
- compatible = "zte,zx296702-ad1", "zte,zx296702"
-System management required properties:
- - compatible = "zte,sysctrl"
-
-Low power management required properties:
- - compatible = "zte,zx296702-pcu"
-
-Bus matrix required properties:
- - compatible = "zte,zx-bus-matrix"
-
-
---------------------------------------
- ZX296718 SoC:
Required root node properties:
@@ -22,18 +12,3 @@ Bus matrix required properties:
ZX296718 EVB board:
- "zte,zx296718-evb"
-
-System management required properties:
- - compatible = "zte,zx296718-aon-sysctrl"
- - compatible = "zte,zx296718-sysctrl"
-
-Example:
-aon_sysctrl: aon-sysctrl@116000 {
- compatible = "zte,zx296718-aon-sysctrl", "syscon";
- reg = <0x116000 0x1000>;
-};
-
-sysctrl: sysctrl@1463000 {
- compatible = "zte,zx296718-sysctrl", "syscon";
- reg = <0x1463000 0x1000>;
-};
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index 5d5bd456d9d9..e30fd106df4f 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -10,6 +10,7 @@ PHYs.
Required properties:
- compatible : compatible string, one of:
- "allwinner,sun4i-a10-ahci"
+ - "allwinner,sun8i-r40-ahci"
- "brcm,iproc-ahci"
- "hisilicon,hisi-ahci"
- "cavium,octeon-7130-ahci"
@@ -31,8 +32,10 @@ Optional properties:
- clocks : a list of phandle + clock specifier pairs
- resets : a list of phandle + reset specifier pairs
- target-supply : regulator for SATA target power
+- phy-supply : regulator for PHY power
- phys : reference to the SATA PHY node
- phy-names : must be "sata-phy"
+- ahci-supply : regulator for AHCI controller
- ports-implemented : Mask that indicates which ports that the HBA supports
are available for software to use. Useful if PORTS_IMPL
is not programmed by the BIOS, which is true with
@@ -42,12 +45,13 @@ Required properties when using sub-nodes:
- #address-cells : number of cells to encode an address
- #size-cells : number of cells representing the size of an address
+For allwinner,sun8i-r40-ahci, the reset propertie must be present.
Sub-nodes required properties:
- reg : the port number
And at least one of the following properties:
- phys : reference to the SATA PHY node
-- target-supply : regulator for SATA target power
+- target-supply : regulator for SATA target power
Examples:
sata@ffe08000 {
diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
index 0a5b3b47f217..7713a413c6a7 100644
--- a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
+++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
@@ -9,6 +9,7 @@ Required properties:
"brcm,bcm7445-ahci"
"brcm,bcm-nsp-ahci"
"brcm,sata3-ahci"
+ "brcm,bcm63138-ahci"
- reg : register mappings for AHCI and SATA_TOP_CTRL
- reg-names : "ahci" and "top-ctrl"
- interrupts : interrupt mapping for SATA IRQ
diff --git a/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
index d1e60d297387..2ef86ae96df8 100644
--- a/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
+++ b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
@@ -13,6 +13,7 @@ Required Properties:
region.
- clocks: Reference to the parent clocks ("hosc", "losc")
- #clock-cells: should be 1.
+- #reset-cells: should be 1.
Each clock is assigned an identifier, and client nodes can use this identifier
to specify the clock which they consume.
@@ -36,6 +37,7 @@ Example: Clock Management Unit node:
reg = <0x0 0xe0160000 0x0 0x1000>;
clocks = <&hosc>, <&losc>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
Example: UART controller node that consumes clock generated by the clock
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
index 8f8f95056f3d..e9f70fcdfe80 100644
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -4,6 +4,8 @@ This binding uses the common clock binding[1].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+Slow Clock controller:
+
Required properties:
- compatible : shall be one of the following:
"atmel,at91sam9x5-sckc" or
@@ -16,84 +18,6 @@ Required properties:
"atmel,at91sam9x5-clk-slow-rc-osc":
at91 internal slow RC oscillator
-
- "atmel,<chip>-pmc":
- at91 PMC (Power Management Controller)
- All at91 specific clocks (clocks defined below) must be child
- node of the PMC node.
- <chip> can be: at91rm9200, at91sam9260, at91sam9261,
- at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9x5,
- sama5d2, sama5d3 or sama5d4.
-
- "atmel,at91sam9x5-clk-slow" (under sckc node)
- or
- "atmel,at91sam9260-clk-slow" (under pmc node):
- at91 slow clk
-
- "atmel,at91rm9200-clk-main-osc"
- "atmel,at91sam9x5-clk-main-rc-osc"
- at91 main clk sources
-
- "atmel,at91sam9x5-clk-main"
- "atmel,at91rm9200-clk-main":
- at91 main clock
-
- "atmel,at91rm9200-clk-master" or
- "atmel,at91sam9x5-clk-master":
- at91 master clock
-
- "atmel,at91sam9x5-clk-peripheral" or
- "atmel,at91rm9200-clk-peripheral":
- at91 peripheral clocks
-
- "atmel,at91rm9200-clk-pll" or
- "atmel,at91sam9g45-clk-pll" or
- "atmel,at91sam9g20-clk-pllb" or
- "atmel,sama5d3-clk-pll":
- at91 pll clocks
-
- "atmel,at91sam9x5-clk-plldiv":
- at91 plla divisor
-
- "atmel,at91rm9200-clk-programmable" or
- "atmel,at91sam9g45-clk-programmable" or
- "atmel,at91sam9x5-clk-programmable":
- at91 programmable clocks
-
- "atmel,at91sam9x5-clk-smd":
- at91 SMD (Soft Modem) clock
-
- "atmel,at91rm9200-clk-system":
- at91 system clocks
-
- "atmel,at91rm9200-clk-usb" or
- "atmel,at91sam9x5-clk-usb" or
- "atmel,at91sam9n12-clk-usb":
- at91 usb clock
-
- "atmel,at91sam9x5-clk-utmi":
- at91 utmi clock
-
- "atmel,sama5d4-clk-h32mx":
- at91 h32mx clock
-
- "atmel,sama5d2-clk-generated":
- at91 generated clock
-
- "atmel,sama5d2-clk-audio-pll-frac":
- at91 audio fractional pll
-
- "atmel,sama5d2-clk-audio-pll-pad":
- at91 audio pll CLK_AUDIO output pin
-
- "atmel,sama5d2-clk-audio-pll-pmc"
- at91 audio pll output on AUDIOPLLCLK that feeds the PMC
- and can be used by peripheral clock or generic clock
-
- "atmel,sama5d2-clk-i2s-mux" (under pmc node):
- at91 I2S clock source selection
-
-Required properties for SCKC node:
- reg : defines the IO memory reserved for the SCKC.
- #size-cells : shall be 0 (reg is used to encode clk id).
- #address-cells : shall be 1 (reg is used to encode clk id).
@@ -109,428 +33,30 @@ For example:
/* put at91 slow clocks here */
};
+Power Management Controller (PMC):
-Required properties for internal slow RC oscillator:
-- #clock-cells : from common clock binding; shall be set to 0.
-- clock-frequency : define the internal RC oscillator frequency.
-
-Optional properties:
-- clock-accuracy : define the internal RC oscillator accuracy.
-
-For example:
- slow_rc_osc: slow_rc_osc {
- compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
- clock-frequency = <32768>;
- clock-accuracy = <50000000>;
- };
-
-Required properties for slow oscillator:
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall encode the main osc source clk sources (see atmel datasheet).
+Required properties:
+- compatible : shall be "atmel,<chip>-pmc", "syscon":
+ <chip> can be: at91rm9200, at91sam9260, at91sam9261,
+ at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15,
+ at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5,
+ sama5d2, sama5d3 or sama5d4.
+- #clock-cells : from common clock binding; shall be set to 2. The first entry
+ is the type of the clock (core, system, peripheral or generated) and the
+ second entry its index as provided by the datasheet
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names: Must include the following entries: "slow_clk", "main_xtal"
Optional properties:
- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
provided on XIN.
For example:
- slow_osc: slow_osc {
- compatible = "atmel,at91rm9200-clk-slow-osc";
- #clock-cells = <0>;
- clocks = <&slow_xtal>;
- };
-
-Required properties for slow clock:
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall encode the slow clk sources (see atmel datasheet).
-
-For example:
- clk32k: slck {
- compatible = "atmel,at91sam9x5-clk-slow";
- #clock-cells = <0>;
- clocks = <&slow_rc_osc &slow_osc>;
- };
-
-Required properties for PMC node:
-- reg : defines the IO memory reserved for the PMC.
-- #size-cells : shall be 0 (reg is used to encode clk id).
-- #address-cells : shall be 1 (reg is used to encode clk id).
-- interrupts : shall be set to PMC interrupt line.
-- interrupt-controller : tell that the PMC is an interrupt controller.
-- #interrupt-cells : must be set to 1. The first cell encodes the interrupt id,
- and reflect the bit position in the PMC_ER/DR/SR registers.
- You can use the dt macros defined in dt-bindings/clock/at91.h.
- 0 (AT91_PMC_MOSCS) -> main oscillator ready
- 1 (AT91_PMC_LOCKA) -> PLL A ready
- 2 (AT91_PMC_LOCKB) -> PLL B ready
- 3 (AT91_PMC_MCKRDY) -> master clock ready
- 6 (AT91_PMC_LOCKU) -> UTMI PLL clock ready
- 8 .. 15 (AT91_PMC_PCKRDY(id)) -> programmable clock ready
- 16 (AT91_PMC_MOSCSELS) -> main oscillator selected
- 17 (AT91_PMC_MOSCRCS) -> RC main oscillator stabilized
- 18 (AT91_PMC_CFDEV) -> clock failure detected
-
-For example:
- pmc: pmc@fffffc00 {
- compatible = "atmel,sama5d3-pmc";
- interrupts = <1 4 7>;
- interrupt-controller;
- #interrupt-cells = <2>;
- #size-cells = <0>;
- #address-cells = <1>;
-
- /* put at91 clocks here */
- };
-
-Required properties for main clock internal RC oscillator:
-- interrupts : shall be set to "<0>".
-- clock-frequency : define the internal RC oscillator frequency.
-
-Optional properties:
-- clock-accuracy : define the internal RC oscillator accuracy.
-
-For example:
- main_rc_osc: main_rc_osc {
- compatible = "atmel,at91sam9x5-clk-main-rc-osc";
- interrupt-parent = <&pmc>;
- interrupts = <0>;
- clock-frequency = <12000000>;
- clock-accuracy = <50000000>;
- };
-
-Required properties for main clock oscillator:
-- interrupts : shall be set to "<0>".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall encode the main osc source clk sources (see atmel datasheet).
-
-Optional properties:
-- atmel,osc-bypass : boolean property. Specified if a clock signal is provided
- on XIN.
-
- clock signal is directly provided on XIN pin.
-
-For example:
- main_osc: main_osc {
- compatible = "atmel,at91rm9200-clk-main-osc";
- interrupt-parent = <&pmc>;
- interrupts = <0>;
- #clock-cells = <0>;
- clocks = <&main_xtal>;
- };
-
-Required properties for main clock:
-- interrupts : shall be set to "<0>".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall encode the main clk sources (see atmel datasheet).
-
-For example:
- main: mainck {
- compatible = "atmel,at91sam9x5-clk-main";
- interrupt-parent = <&pmc>;
- interrupts = <0>;
- #clock-cells = <0>;
- clocks = <&main_rc_osc &main_osc>;
- };
-
-Required properties for master clock:
-- interrupts : shall be set to "<3>".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the master clock sources (see atmel datasheet) phandles.
- e.g. "<&ck32k>, <&main>, <&plla>, <&pllb>".
-- atmel,clk-output-range : minimum and maximum clock frequency (two u32
- fields).
- e.g. output = <0 133000000>; <=> 0 to 133MHz.
-- atmel,clk-divisors : master clock divisors table (four u32 fields).
- 0 <=> reserved value.
- e.g. divisors = <1 2 4 6>;
-- atmel,master-clk-have-div3-pres : some SoC use the reserved value 7 in the
- PRES field as CLOCK_DIV3 (e.g sam9x5).
-
-For example:
- mck: mck {
- compatible = "atmel,at91rm9200-clk-master";
- interrupt-parent = <&pmc>;
- interrupts = <3>;
- #clock-cells = <0>;
- atmel,clk-output-range = <0 133000000>;
- atmel,clk-divisors = <1 2 4 0>;
- };
-
-Required properties for peripheral clocks:
-- #size-cells : shall be 0 (reg is used to encode clk id).
-- #address-cells : shall be 1 (reg is used to encode clk id).
-- clocks : shall be the master clock phandle.
- e.g. clocks = <&mck>;
-- name: device tree node describing a specific peripheral clock.
- * #clock-cells : from common clock binding; shall be set to 0.
- * reg: peripheral id. See Atmel's datasheets to get a full
- list of peripheral ids.
- * atmel,clk-output-range : minimum and maximum clock frequency
- (two u32 fields). Only valid on at91sam9x5-clk-peripheral
- compatible IPs.
-
-For example:
- periph: periphck {
- compatible = "atmel,at91sam9x5-clk-peripheral";
- #size-cells = <0>;
- #address-cells = <1>;
- clocks = <&mck>;
-
- ssc0_clk {
- #clock-cells = <0>;
- reg = <2>;
- atmel,clk-output-range = <0 133000000>;
- };
-
- usart0_clk {
- #clock-cells = <0>;
- reg = <3>;
- atmel,clk-output-range = <0 66000000>;
- };
- };
-
-
-Required properties for pll clocks:
-- interrupts : shall be set to "<1>".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the main clock phandle.
-- reg : pll id.
- 0 -> PLL A
- 1 -> PLL B
-- atmel,clk-input-range : minimum and maximum source clock frequency (two u32
- fields).
- e.g. input = <1 32000000>; <=> 1 to 32MHz.
-- #atmel,pll-clk-output-range-cells : number of cells reserved for pll output
- range description. Sould be set to 2, 3
- or 4.
- * 1st and 2nd cells represent the frequency range (min-max).
- * 3rd cell is optional and represents the OUT field value for the given
- range.
- * 4th cell is optional and represents the ICPLL field (PLLICPR
- register)
-- atmel,pll-clk-output-ranges : pll output frequency ranges + optional parameter
- depending on #atmel,pll-output-range-cells
- property value.
-
-For example:
- plla: pllack {
- compatible = "atmel,at91sam9g45-clk-pll";
- interrupt-parent = <&pmc>;
- interrupts = <1>;
- #clock-cells = <0>;
- clocks = <&main>;
- reg = <0>;
- atmel,clk-input-range = <2000000 32000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <74500000 800000000 0 0
- 69500000 750000000 1 0
- 64500000 700000000 2 0
- 59500000 650000000 3 0
- 54500000 600000000 0 1
- 49500000 550000000 1 1
- 44500000 500000000 2 1
- 40000000 450000000 3 1>;
- };
-
-Required properties for plldiv clocks (plldiv = pll / 2):
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the plla clock phandle.
-
-The pll divisor is equal to 2 and cannot be changed.
-
-For example:
- plladiv: plladivck {
- compatible = "atmel,at91sam9x5-clk-plldiv";
- #clock-cells = <0>;
- clocks = <&plla>;
- };
-
-Required properties for programmable clocks:
-- #size-cells : shall be 0 (reg is used to encode clk id).
-- #address-cells : shall be 1 (reg is used to encode clk id).
-- clocks : shall be the programmable clock source phandles.
- e.g. clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
-- name: device tree node describing a specific prog clock.
- * #clock-cells : from common clock binding; shall be set to 0.
- * reg : programmable clock id (register offset from PCKx
- register).
- * interrupts : shall be set to "<(8 + id)>".
-
-For example:
- prog: progck {
- compatible = "atmel,at91sam9g45-clk-programmable";
- #size-cells = <0>;
- #address-cells = <1>;
- interrupt-parent = <&pmc>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
- prog0 {
- #clock-cells = <0>;
- reg = <0>;
- interrupts = <8>;
- };
-
- prog1 {
- #clock-cells = <0>;
- reg = <1>;
- interrupts = <9>;
- };
- };
-
-
-Required properties for smd clock:
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the smd clock source phandles.
- e.g. clocks = <&plladiv>, <&utmi>;
-
-For example:
- smd: smdck {
- compatible = "atmel,at91sam9x5-clk-smd";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
-Required properties for system clocks:
-- #size-cells : shall be 0 (reg is used to encode clk id).
-- #address-cells : shall be 1 (reg is used to encode clk id).
-- name: device tree node describing a specific system clock.
- * #clock-cells : from common clock binding; shall be set to 0.
- * reg: system clock id (bit position in SCER/SCDR/SCSR registers).
- See Atmel's datasheet to get a full list of system clock ids.
-
-For example:
- system: systemck {
- compatible = "atmel,at91rm9200-clk-system";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ddrck {
- #clock-cells = <0>;
- reg = <2>;
- clocks = <&mck>;
- };
-
- uhpck {
- #clock-cells = <0>;
- reg = <6>;
- clocks = <&usb>;
- };
-
- udpck {
- #clock-cells = <0>;
- reg = <7>;
- clocks = <&usb>;
- };
- };
-
-
-Required properties for usb clock:
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the smd clock source phandles.
- e.g. clocks = <&pllb>;
-- atmel,clk-divisors (only available for "atmel,at91rm9200-clk-usb"):
- usb clock divisor table.
- e.g. divisors = <1 2 4 0>;
-
-For example:
- usb: usbck {
- compatible = "atmel,at91sam9x5-clk-usb";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- usb: usbck {
- compatible = "atmel,at91rm9200-clk-usb";
- #clock-cells = <0>;
- clocks = <&pllb>;
- atmel,clk-divisors = <1 2 4 0>;
- };
-
-
-Required properties for utmi clock:
-- interrupts : shall be set to "<AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the main clock source phandle.
-
-For example:
- utmi: utmick {
- compatible = "atmel,at91sam9x5-clk-utmi";
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>;
- #clock-cells = <0>;
- clocks = <&main>;
- };
-
-Required properties for 32 bits bus Matrix clock (h32mx clock):
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the master clock source phandle.
-
-For example:
- h32ck: h32mxck {
- #clock-cells = <0>;
- compatible = "atmel,sama5d4-clk-h32mx";
- clocks = <&mck>;
- };
-
-Required properties for generated clocks:
-- #size-cells : shall be 0 (reg is used to encode clk id).
-- #address-cells : shall be 1 (reg is used to encode clk id).
-- clocks : shall be the generated clock source phandles.
- e.g. clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
-- name: device tree node describing a specific generated clock.
- * #clock-cells : from common clock binding; shall be set to 0.
- * reg: peripheral id. See Atmel's datasheets to get a full
- list of peripheral ids.
- * atmel,clk-output-range : minimum and maximum clock frequency
- (two u32 fields).
-
-For example:
- gck {
- compatible = "atmel,sama5d2-clk-generated";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
-
- tcb0_gclk: tcb0_gclk {
- #clock-cells = <0>;
- reg = <35>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- pwm_gclk: pwm_gclk {
- #clock-cells = <0>;
- reg = <38>;
- atmel,clk-output-range = <0 83000000>;
- };
- };
-
-Required properties for I2S mux clocks:
-- #size-cells : shall be 0 (reg is used to encode I2S bus id).
-- #address-cells : shall be 1 (reg is used to encode I2S bus id).
-- name: device tree node describing a specific mux clock.
- * #clock-cells : from common clock binding; shall be set to 0.
- * clocks : shall be the mux clock parent phandles; shall be 2 phandles:
- peripheral and generated clock; the first phandle shall belong to the
- peripheral clock and the second one shall belong to the generated
- clock; "clock-indices" property can be user to specify
- the correct order.
- * reg: I2S bus id of the corresponding mux clock.
- e.g. reg = <0>; for i2s0, reg = <1>; for i2s1
-
-For example:
- i2s_clkmux {
- compatible = "atmel,sama5d2-clk-i2s-mux";
- #address-cells = <1>;
- #size-cells = <0>;
-
- i2s0muxck: i2s0_muxclk {
- clocks = <&i2s0_clk>, <&i2s0_gclk>;
- #clock-cells = <0>;
- reg = <0>;
- };
-
- i2s1muxck: i2s1_muxclk {
- clocks = <&i2s1_clk>, <&i2s1_gclk>;
- #clock-cells = <0>;
- reg = <1>;
- };
+ pmc: pmc@f0018000 {
+ compatible = "atmel,sama5d4-pmc", "syscon";
+ reg = <0xf0018000 0x120>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ #clock-cells = <2>;
+ clocks = <&clk32k>, <&main_xtal>;
+ clock-names = "slow_clk", "main_xtal";
};
diff --git a/Documentation/devicetree/bindings/clock/hi3670-clock.txt b/Documentation/devicetree/bindings/clock/hi3670-clock.txt
new file mode 100644
index 000000000000..66f3697eca78
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hi3670-clock.txt
@@ -0,0 +1,43 @@
+* Hisilicon Hi3670 Clock Controller
+
+The Hi3670 clock controller generates and supplies clock to various
+controllers within the Hi3670 SoC.
+
+Required Properties:
+
+- compatible: the compatible should be one of the following strings to
+ indicate the clock controller functionality.
+
+ - "hisilicon,hi3670-crgctrl"
+ - "hisilicon,hi3670-pctrl"
+ - "hisilicon,hi3670-pmuctrl"
+ - "hisilicon,hi3670-sctrl"
+ - "hisilicon,hi3670-iomcu"
+ - "hisilicon,hi3670-media1-crg"
+ - "hisilicon,hi3670-media2-crg"
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi3670-clock.h>.
+
+Examples:
+ crg_ctrl: clock-controller@fff35000 {
+ compatible = "hisilicon,hi3670-crgctrl", "syscon";
+ reg = <0x0 0xfff35000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ uart0: serial@fdf02000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf02000 0x0 0x1000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3670_CLK_GATE_UART0>,
+ <&crg_ctrl HI3670_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index a45ca67a9d5f..e1308346e00d 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -6,6 +6,14 @@ Required properties:
- interrupts: Should contain CCM interrupt
- #clock-cells: Should be <1>
+Optional properties:
+- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal
+ on power off.
+ Use this property if the SoC should be powered off by external power
+ management IC (PMIC) triggered via PMIC_STBY_REQ signal.
+ Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
+ be using "syscon-poweroff" driver instead.
+
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h
for the full list of i.MX6 Quad and DualLite clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
index f8d4134ae409..ba5a442026b7 100644
--- a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
+++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
@@ -6,8 +6,11 @@ to provide many different clock signals derived from only 2 external source
clocks.
Required properties:
-- compatible : Should be "ingenic,<soctype>-cgu".
- For example "ingenic,jz4740-cgu" or "ingenic,jz4780-cgu".
+- compatible : Should be one of:
+ * ingenic,jz4740-cgu
+ * ingenic,jz4725b-cgu
+ * ingenic,jz4770-cgu
+ * ingenic,jz4780-cgu
- reg : The address & length of the CGU registers.
- clocks : List of phandle & clock specifiers for clocks external to the CGU.
Two such external clocks should be specified - first the external crystal
diff --git a/Documentation/devicetree/bindings/clock/qcom,camcc.txt b/Documentation/devicetree/bindings/clock/qcom,camcc.txt
new file mode 100644
index 000000000000..c5eb6694fda9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,camcc.txt
@@ -0,0 +1,18 @@
+Qualcomm Camera Clock & Reset Controller Binding
+------------------------------------------------
+
+Required properties :
+- compatible : shall contain "qcom,sdm845-camcc".
+- reg : shall contain base register location and length.
+- #clock-cells : from common clock binding, shall contain 1.
+- #reset-cells : from common reset binding, shall contain 1.
+- #power-domain-cells : from generic power domain binding, shall contain 1.
+
+Example:
+ camcc: clock-controller@ad00000 {
+ compatible = "qcom,sdm845-camcc";
+ reg = <0xad00000 0x10000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
index 664ea1fd6c76..52d9345c9927 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -19,6 +19,9 @@ Required properties :
"qcom,gcc-msm8996"
"qcom,gcc-msm8998"
"qcom,gcc-mdm9615"
+ "qcom,gcc-qcs404"
+ "qcom,gcc-sdm630"
+ "qcom,gcc-sdm660"
"qcom,gcc-sdm845"
- reg : shall contain base register location and length
diff --git a/Documentation/devicetree/bindings/clock/qcom,hfpll.txt b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt
new file mode 100644
index 000000000000..ec02a024424c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt
@@ -0,0 +1,60 @@
+High-Frequency PLL (HFPLL)
+
+PROPERTIES
+
+- compatible:
+ Usage: required
+ Value type: <string>:
+ shall contain only one of the following. The generic
+ compatible "qcom,hfpll" should be also included.
+
+ "qcom,hfpll-ipq8064", "qcom,hfpll"
+ "qcom,hfpll-apq8064", "qcom,hfpll"
+ "qcom,hfpll-msm8974", "qcom,hfpll"
+ "qcom,hfpll-msm8960", "qcom,hfpll"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: address and size of HPLL registers. An optional second
+ element specifies the address and size of the alias
+ register region.
+
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: reference to the xo clock.
+
+- clock-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "xo".
+
+- clock-output-names:
+ Usage: required
+ Value type: <string>
+ Definition: Name of the PLL. Typically hfpllX where X is a CPU number
+ starting at 0. Otherwise hfpll_Y where Y is more specific
+ such as "l2".
+
+Example:
+
+1) An HFPLL for the L2 cache.
+
+ clock-controller@f9016000 {
+ compatible = "qcom,hfpll-ipq8064", "qcom,hfpll";
+ reg = <0xf9016000 0x30>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ clock-output-names = "hfpll_l2";
+ };
+
+2) An HFPLL for CPU0. This HFPLL has the alias register region.
+
+ clock-controller@f908a000 {
+ compatible = "qcom,hfpll-ipq8064", "qcom,hfpll";
+ reg = <0xf908a000 0x30>, <0xf900a000 0x30>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ clock-output-names = "hfpll0";
+ };
diff --git a/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
new file mode 100644
index 000000000000..030ba60dab08
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
@@ -0,0 +1,34 @@
+Krait Clock Controller
+
+PROPERTIES
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,krait-cc-v1"
+ "qcom,krait-cc-v2"
+
+- #clock-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 1
+
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: reference to the clock parents of hfpll, secondary muxes.
+
+- clock-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "hfpll0", "hfpll1", "acpu0_aux", "acpu1_aux", "qsb".
+
+Example:
+
+ kraitcc: clock-controller {
+ compatible = "qcom,krait-cc-v1";
+ clocks = <&hfpll0>, <&hfpll1>, <&acpu0_aux>, <&acpu1_aux>, <qsb>;
+ clock-names = "hfpll0", "hfpll1", "acpu0_aux", "acpu1_aux", "qsb";
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
index db542abadb75..916a601b76a7 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
@@ -13,9 +13,13 @@ They provide the following functionalities:
Required Properties:
- compatible: Must be one of:
+ - "renesas,r7s9210-cpg-mssr" for the r7s9210 SoC (RZ/A2)
- "renesas,r8a7743-cpg-mssr" for the r8a7743 SoC (RZ/G1M)
+ - "renesas,r8a7744-cpg-mssr" for the r8a7744 SoC (RZ/G1N)
- "renesas,r8a7745-cpg-mssr" for the r8a7745 SoC (RZ/G1E)
- "renesas,r8a77470-cpg-mssr" for the r8a77470 SoC (RZ/G1C)
+ - "renesas,r8a774a1-cpg-mssr" for the r8a774a1 SoC (RZ/G2M)
+ - "renesas,r8a774c0-cpg-mssr" for the r8a774c0 SoC (RZ/G2E)
- "renesas,r8a7790-cpg-mssr" for the r8a7790 SoC (R-Car H2)
- "renesas,r8a7791-cpg-mssr" for the r8a7791 SoC (R-Car M2-W)
- "renesas,r8a7792-cpg-mssr" for the r8a7792 SoC (R-Car V2H)
@@ -35,12 +39,13 @@ Required Properties:
- clocks: References to external parent clocks, one entry for each entry in
clock-names
- clock-names: List of external parent clock names. Valid names are:
- - "extal" (r8a7743, r8a7745, r8a77470, r8a7790, r8a7791, r8a7792,
- r8a7793, r8a7794, r8a7795, r8a7796, r8a77965, r8a77970,
- r8a77980, r8a77990, r8a77995)
- - "extalr" (r8a7795, r8a7796, r8a77965, r8a77970, r8a77980)
- - "usb_extal" (r8a7743, r8a7745, r8a77470, r8a7790, r8a7791, r8a7793,
- r8a7794)
+ - "extal" (r7s9210, r8a7743, r8a7744, r8a7745, r8a77470, r8a774a1,
+ r8a774c0, r8a7790, r8a7791, r8a7792, r8a7793, r8a7794,
+ r8a7795, r8a7796, r8a77965, r8a77970, r8a77980, r8a77990,
+ r8a77995)
+ - "extalr" (r8a774a1, r8a7795, r8a7796, r8a77965, r8a77970, r8a77980)
+ - "usb_extal" (r8a7743, r8a7744, r8a7745, r8a77470, r8a7790, r8a7791,
+ r8a7793, r8a7794)
- #clock-cells: Must be 2
- For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt
index 8855bfcfd778..d90e17e2428b 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.txt
+++ b/Documentation/devicetree/bindings/connector/usb-connector.txt
@@ -29,15 +29,15 @@ Required properties for usb-c-connector with power delivery support:
in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
Source_Capabilities Message, the order of each entry(PDO) should follow
the PD spec chapter 6.4.1. Required for power source and power dual role.
- User can specify the source PDO array via PDO_FIXED/BATT/VAR() defined in
- dt-bindings/usb/pd.h.
+ User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
+ defined in dt-bindings/usb/pd.h.
- sink-pdos: An array of u32 with each entry providing supported power
sink data object(PDO), the detailed bit definitions of PDO can be found
in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
Sink Capabilities Message, the order of each entry(PDO) should follow
the PD spec chapter 6.4.1. Required for power sink and power dual role.
- User can specify the sink PDO array via PDO_FIXED/BATT/VAR() defined in
- dt-bindings/usb/pd.h.
+ User can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
+ in dt-bindings/usb/pd.h.
- op-sink-microwatt: Sink required operating power in microwatt, if source
can't offer the power, Capability Mismatch is set. Required for power
sink and power dual role.
diff --git a/Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt b/Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt
index 78d2db9d4de5..d28fd1af01b4 100644
--- a/Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt
+++ b/Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt
@@ -24,7 +24,7 @@ Optional properties:
Example:
-p1_sec_a: crypto@400,d2000000 {
+p1_sec_a: crypto@400d2000000 {
compatible = "hisilicon,hip07-sec";
reg = <0x400 0xd0000000 0x0 0x10000
0x400 0xd2000000 0x0 0x10000
diff --git a/Documentation/devicetree/bindings/csky/cpus.txt b/Documentation/devicetree/bindings/csky/cpus.txt
new file mode 100644
index 000000000000..ae79412f2680
--- /dev/null
+++ b/Documentation/devicetree/bindings/csky/cpus.txt
@@ -0,0 +1,73 @@
+==================
+C-SKY CPU Bindings
+==================
+
+The device tree allows to describe the layout of CPUs in a system through
+the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
+defining properties for every cpu.
+
+Only SMP system need to care about the cpus node and single processor
+needn't define cpus node at all.
+
+=====================================
+cpus and cpu node bindings definition
+=====================================
+
+- cpus node
+
+ Description: Container of cpu nodes
+
+ The node name must be "cpus".
+
+ A cpus node must define the following properties:
+
+ - #address-cells
+ Usage: required
+ Value type: <u32>
+ Definition: must be set to 1
+ - #size-cells
+ Usage: required
+ Value type: <u32>
+ Definition: must be set to 0
+
+- cpu node
+
+ Description: Describes one of SMP cores
+
+ PROPERTIES
+
+ - device_type
+ Usage: required
+ Value type: <string>
+ Definition: must be "cpu"
+ - reg
+ Usage: required
+ Value type: <u32>
+ Definition: CPU index
+ - compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must contain "csky", eg:
+ "csky,610"
+ "csky,807"
+ "csky,810"
+ "csky,860"
+
+Example:
+--------
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ reg = <0>;
+ status = "ok";
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ reg = <1>;
+ status = "ok";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/dma/jz4780-dma.txt b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
index 03e9cf7b42e0..636fcb26b164 100644
--- a/Documentation/devicetree/bindings/dma/jz4780-dma.txt
+++ b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
@@ -2,8 +2,13 @@
Required properties:
-- compatible: Should be "ingenic,jz4780-dma"
-- reg: Should contain the DMA controller registers location and length.
+- compatible: Should be one of:
+ * ingenic,jz4740-dma
+ * ingenic,jz4725b-dma
+ * ingenic,jz4770-dma
+ * ingenic,jz4780-dma
+- reg: Should contain the DMA channel registers location and length, followed
+ by the DMA controller registers location and length.
- interrupts: Should contain the interrupt specifier of the DMA controller.
- clocks: Should contain a clock specifier for the JZ4780 PDMA clock.
- #dma-cells: Must be <2>. Number of integer cells in the dmas property of
@@ -19,9 +24,10 @@ Optional properties:
Example:
-dma: dma@13420000 {
+dma: dma-controller@13420000 {
compatible = "ingenic,jz4780-dma";
- reg = <0x13420000 0x10000>;
+ reg = <0x13420000 0x400
+ 0x13421000 0x40>;
interrupt-parent = <&intc>;
interrupts = <10>;
diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
index 946229c48657..a5a7c3f5a1e3 100644
--- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
+++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
@@ -17,6 +17,7 @@ Required Properties:
- compatible: "renesas,dmac-<soctype>", "renesas,rcar-dmac" as fallback.
Examples with soctypes are:
- "renesas,dmac-r8a7743" (RZ/G1M)
+ - "renesas,dmac-r8a7744" (RZ/G1N)
- "renesas,dmac-r8a7745" (RZ/G1E)
- "renesas,dmac-r8a77470" (RZ/G1C)
- "renesas,dmac-r8a7790" (R-Car H2)
diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
index 482e54362d3e..1743017bd948 100644
--- a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
+++ b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
@@ -4,6 +4,7 @@ Required Properties:
-compatible: "renesas,<soctype>-usb-dmac", "renesas,usb-dmac" as fallback.
Examples with soctypes are:
- "renesas,r8a7743-usb-dmac" (RZ/G1M)
+ - "renesas,r8a7744-usb-dmac" (RZ/G1N)
- "renesas,r8a7745-usb-dmac" (RZ/G1E)
- "renesas,r8a7790-usb-dmac" (R-Car H2)
- "renesas,r8a7791-usb-dmac" (R-Car M2-W)
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
index fcf6979c0b6d..41f133a4e2fa 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
@@ -7,16 +7,23 @@ assorted actions.
Required properties:
- compatible: must contain one of the following:
- * "qcom,scm-apq8064" for APQ8064 platforms
- * "qcom,scm-msm8660" for MSM8660 platforms
- * "qcom,scm-msm8690" for MSM8690 platforms
- * "qcom,scm-msm8996" for MSM8996 platforms
- * "qcom,scm-ipq4019" for IPQ4019 platforms
- * "qcom,scm" for later processors (MSM8916, APQ8084, MSM8974, etc)
-- clocks: One to three clocks may be required based on compatible.
- * No clock required for "qcom,scm-msm8996", "qcom,scm-ipq4019"
- * Only core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660", and "qcom,scm-msm8960"
- * Core, iface, and bus clocks required for "qcom,scm"
+ * "qcom,scm-apq8064"
+ * "qcom,scm-apq8084"
+ * "qcom,scm-msm8660"
+ * "qcom,scm-msm8916"
+ * "qcom,scm-msm8960"
+ * "qcom,scm-msm8974"
+ * "qcom,scm-msm8996"
+ * "qcom,scm-msm8998"
+ * "qcom,scm-ipq4019"
+ * "qcom,scm-sdm845"
+ and:
+ * "qcom,scm"
+- clocks: Specifies clocks needed by the SCM interface, if any:
+ * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and
+ "qcom,scm-msm8960"
+ * core, iface and bus clocks required for "qcom,scm-apq8084",
+ "qcom,scm-msm8916" and "qcom,scm-msm8974"
- clock-names: Must contain "core" for the core clock, "iface" for the interface
clock and "bus" for the bus clock per the requirements of the compatible.
- qcom,dload-mode: phandle to the TCSR hardware block and offset of the
@@ -26,8 +33,10 @@ Example for MSM8916:
firmware {
scm {
- compatible = "qcom,scm";
- clocks = <&gcc GCC_CRYPTO_CLK> , <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>;
+ compatible = "qcom,msm8916", "qcom,scm";
+ clocks = <&gcc GCC_CRYPTO_CLK> ,
+ <&gcc GCC_CRYPTO_AXI_CLK>,
+ <&gcc GCC_CRYPTO_AHB_CLK>;
clock-names = "core", "bus", "iface";
};
};
diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
new file mode 100644
index 000000000000..614bac55df86
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
@@ -0,0 +1,82 @@
+-----------------------------------------------------------------
+Device Tree Bindings for the Xilinx Zynq MPSoC Firmware Interface
+-----------------------------------------------------------------
+
+The zynqmp-firmware node describes the interface to platform firmware.
+ZynqMP has an interface to communicate with secure firmware. Firmware
+driver provides an interface to firmware APIs. Interface APIs can be
+used by any driver to communicate to PMUFW(Platform Management Unit).
+These requests include clock management, pin control, device control,
+power management service, FPGA service and other platform management
+services.
+
+Required properties:
+ - compatible: Must contain: "xlnx,zynqmp-firmware"
+ - method: The method of calling the PM-API firmware layer.
+ Permitted values are:
+ - "smc" : SMC #0, following the SMCCC
+ - "hvc" : HVC #0, following the SMCCC
+
+--------------------------------------------------------------------------
+Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC controlled using
+Zynq MPSoC firmware interface
+--------------------------------------------------------------------------
+The clock controller is a h/w block of Zynq Ultrascale+ MPSoC clock
+tree. It reads required input clock frequencies from the devicetree and acts
+as clock provider for all clock consumers of PS clocks.
+
+See clock_bindings.txt for more information on the generic clock bindings.
+
+Required properties:
+ - #clock-cells: Must be 1
+ - compatible: Must contain: "xlnx,zynqmp-clk"
+ - clocks: List of clock specifiers which are external input
+ clocks to the given clock controller. Please refer
+ the next section to find the input clocks for a
+ given controller.
+ - clock-names: List of clock names which are exteral input clocks
+ to the given clock controller. Please refer to the
+ clock bindings for more details.
+
+Input clocks for zynqmp Ultrascale+ clock controller:
+
+The Zynq UltraScale+ MPSoC has one primary and four alternative reference clock
+inputs. These required clock inputs are:
+ - pss_ref_clk (PS reference clock)
+ - video_clk (reference clock for video system )
+ - pss_alt_ref_clk (alternative PS reference clock)
+ - aux_ref_clk
+ - gt_crx_ref_clk (transceiver reference clock)
+
+The following strings are optional parameters to the 'clock-names' property in
+order to provide an optional (E)MIO clock source:
+ - swdt0_ext_clk
+ - swdt1_ext_clk
+ - gem0_emio_clk
+ - gem1_emio_clk
+ - gem2_emio_clk
+ - gem3_emio_clk
+ - mio_clk_XX # with XX = 00..77
+ - mio_clk_50_or_51 #for the mux clock to gem tsu from 50 or 51
+
+
+Output clocks are registered based on clock information received
+from firmware. Output clocks indexes are mentioned in
+include/dt-bindings/clock/xlnx,zynqmp-clk.h.
+
+-------
+Example
+-------
+
+firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ compatible = "xlnx,zynqmp-firmware";
+ method = "smc";
+ zynqmp_clk: clock-controller {
+ #clock-cells = <1>;
+ compatible = "xlnx,zynqmp-clk";
+ clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <&gt_crx_ref_clk>;
+ clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk";
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt
index 6db8aeda461a..90c44694a30b 100644
--- a/Documentation/devicetree/bindings/fpga/fpga-region.txt
+++ b/Documentation/devicetree/bindings/fpga/fpga-region.txt
@@ -415,7 +415,7 @@ DT Overlay contains:
firmware-name = "base.rbf";
fpga-bridge@4400 {
- compatible = "altr,freeze-bridge";
+ compatible = "altr,freeze-bridge-controller";
reg = <0x4400 0x10>;
fpga_region1: fpga-region1 {
@@ -427,7 +427,7 @@ DT Overlay contains:
};
fpga-bridge@4420 {
- compatible = "altr,freeze-bridge";
+ compatible = "altr,freeze-bridge-controller";
reg = <0x4420 0x10>;
fpga_region2: fpga-region2 {
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index a7c31de29362..f0ba154b5723 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -1,18 +1,9 @@
Specifying GPIO information for devices
-============================================
+=======================================
1) gpios property
-----------------
-Nodes that makes use of GPIOs should specify them using one or more
-properties, each containing a 'gpio-list':
-
- gpio-list ::= <single-gpio> [gpio-list]
- single-gpio ::= <gpio-phandle> <gpio-specifier>
- gpio-phandle : phandle to gpio controller node
- gpio-specifier : Array of #gpio-cells specifying specific gpio
- (controller specific)
-
GPIO properties should be named "[<name>-]gpios", with <name> being the purpose
of this GPIO for the device. While a non-existent <name> is considered valid
for compatibility reasons (resolving to the "gpios" property), it is not allowed
@@ -33,33 +24,27 @@ The following example could be used to describe GPIO pins used as device enable
and bit-banged data signals:
gpio1: gpio1 {
- gpio-controller
- #gpio-cells = <2>;
- };
- gpio2: gpio2 {
- gpio-controller
- #gpio-cells = <1>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
[...]
- enable-gpios = <&gpio2 2>;
data-gpios = <&gpio1 12 0>,
<&gpio1 13 0>,
<&gpio1 14 0>,
<&gpio1 15 0>;
-Note that gpio-specifier length is controller dependent. In the
-above example, &gpio1 uses 2 cells to specify a gpio, while &gpio2
-only uses one.
+In the above example, &gpio1 uses 2 cells to specify a gpio. The first cell is
+a local offset to the GPIO line and the second cell represent consumer flags,
+such as if the consumer desire the line to be active low (inverted) or open
+drain. This is the recommended practice.
-gpio-specifier may encode: bank, pin position inside the bank,
-whether pin is open-drain and whether pin is logically inverted.
+The exact meaning of each specifier cell is controller specific, and must be
+documented in the device tree binding for the device, but it is strongly
+recommended to use the two-cell approach.
-Exact meaning of each specifier cell is controller specific, and must
-be documented in the device tree binding for the device.
-
-Most controllers are however specifying a generic flag bitfield
-in the last cell, so for these, use the macros defined in
+Most controllers are specifying a generic flag bitfield in the last cell, so
+for these, use the macros defined in
include/dt-bindings/gpio/gpio.h whenever possible:
Example of a node using GPIOs:
@@ -236,46 +221,40 @@ Example of two SOC GPIO banks defined as gpio-controller nodes:
Some or all of the GPIOs provided by a GPIO controller may be routed to pins
on the package via a pin controller. This allows muxing those pins between
-GPIO and other functions.
+GPIO and other functions. It is a fairly common practice among silicon
+engineers.
+
+2.2) Ordinary (numerical) GPIO ranges
+-------------------------------------
It is useful to represent which GPIOs correspond to which pins on which pin
-controllers. The gpio-ranges property described below represents this, and
-contains information structures as follows:
-
- gpio-range-list ::= <single-gpio-range> [gpio-range-list]
- single-gpio-range ::= <numeric-gpio-range> | <named-gpio-range>
- numeric-gpio-range ::=
- <pinctrl-phandle> <gpio-base> <pinctrl-base> <count>
- named-gpio-range ::= <pinctrl-phandle> <gpio-base> '<0 0>'
- pinctrl-phandle : phandle to pin controller node
- gpio-base : Base GPIO ID in the GPIO controller
- pinctrl-base : Base pinctrl pin ID in the pin controller
- count : The number of GPIOs/pins in this range
-
-The "pin controller node" mentioned above must conform to the bindings
-described in ../pinctrl/pinctrl-bindings.txt.
-
-In case named gpio ranges are used (ranges with both <pinctrl-base> and
-<count> set to 0), the property gpio-ranges-group-names contains one string
-for every single-gpio-range in gpio-ranges:
- gpiorange-names-list ::= <gpiorange-name> [gpiorange-names-list]
- gpiorange-name : Name of the pingroup associated to the GPIO range in
- the respective pin controller.
-
-Elements of gpiorange-names-list corresponding to numeric ranges contain
-the empty string. Elements of gpiorange-names-list corresponding to named
-ranges contain the name of a pin group defined in the respective pin
-controller. The number of pins/GPIOs in the range is the number of pins in
-that pin group.
+controllers. The gpio-ranges property described below represents this with
+a discrete set of ranges mapping pins from the pin controller local number space
+to pins in the GPIO controller local number space.
-Previous versions of this binding required all pin controller nodes that
-were referenced by any gpio-ranges property to contain a property named
-#gpio-range-cells with value <3>. This requirement is now deprecated.
-However, that property may still exist in older device trees for
-compatibility reasons, and would still be required even in new device
-trees that need to be compatible with older software.
+The format is: <[pin controller phandle], [GPIO controller offset],
+ [pin controller offset], [number of pins]>;
+
+The GPIO controller offset pertains to the GPIO controller node containing the
+range definition.
+
+The pin controller node referenced by the phandle must conform to the bindings
+described in pinctrl/pinctrl-bindings.txt.
+
+Each offset runs from 0 to N. It is perfectly fine to pile any number of
+ranges with just one pin-to-GPIO line mapping if the ranges are concocted, but
+in practice these ranges are often lumped in discrete sets.
+
+Example:
+
+ gpio-ranges = <&foo 0 20 10>, <&bar 10 50 20>;
-Example 1:
+This means:
+- pins 20..29 on pin controller "foo" is mapped to GPIO line 0..9 and
+- pins 50..69 on pin controller "bar" is mapped to GPIO line 10..29
+
+
+Verbose example:
qe_pio_e: gpio-controller@1460 {
#gpio-cells = <2>;
@@ -289,7 +268,28 @@ Here, a single GPIO controller has GPIOs 0..9 routed to pin controller
pinctrl1's pins 20..29, and GPIOs 10..29 routed to pin controller pinctrl2's
pins 50..69.
-Example 2:
+
+2.3) GPIO ranges from named pin groups
+--------------------------------------
+
+It is also possible to use pin groups for gpio ranges when pin groups are the
+easiest and most convenient mapping.
+
+Both both <pinctrl-base> and <count> must set to 0 when using named pin groups
+names.
+
+The property gpio-ranges-group-names must contain exactly one string for each
+range.
+
+Elements of gpio-ranges-group-names must contain the name of a pin group
+defined in the respective pin controller. The number of pins/GPIO lines in the
+range is the number of pins in that pin group. The number of pins of that
+group is defined int the implementation and not in the device tree.
+
+If numerical and named pin groups are mixed, the string corresponding to a
+numerical pin range in gpio-ranges-group-names must be empty.
+
+Example:
gpio_pio_i: gpio-controller@14b0 {
#gpio-cells = <2>;
@@ -306,6 +306,14 @@ Example 2:
"bar";
};
-Here, three GPIO ranges are defined wrt. two pin controllers. pinctrl1 GPIO
-ranges are defined using pin numbers whereas the GPIO ranges wrt. pinctrl2
-are named "foo" and "bar".
+Here, three GPIO ranges are defined referring to two pin controllers.
+
+pinctrl1 GPIO ranges are defined using pin numbers whereas the GPIO ranges
+in pinctrl2 are defined using the pin groups named "foo" and "bar".
+
+Previous versions of this binding required all pin controller nodes that
+were referenced by any gpio-ranges property to contain a property named
+#gpio-range-cells with value <3>. This requirement is now deprecated.
+However, that property may still exist in older device trees for
+compatibility reasons, and would still be required even in new device
+trees that need to be compatible with older software.
diff --git a/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt b/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
deleted file mode 100644
index 7988aeb725f4..000000000000
--- a/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Ingenic jz47xx GPIO controller
-
-That the Ingenic GPIO driver node must be a sub-node of the Ingenic pinctrl
-driver node.
-
-Required properties:
---------------------
-
- - compatible: Must contain one of:
- - "ingenic,jz4740-gpio"
- - "ingenic,jz4770-gpio"
- - "ingenic,jz4780-gpio"
- - reg: The GPIO bank number.
- - interrupt-controller: Marks the device node as an interrupt controller.
- - interrupts: Interrupt specifier for the controllers interrupt.
- - #interrupt-cells: Should be 2. Refer to
- ../interrupt-controller/interrupts.txt for more details.
- - gpio-controller: Marks the device node as a GPIO controller.
- - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
- cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
- GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
- - gpio-ranges: Range of pins managed by the GPIO controller. Refer to
- 'gpio.txt' in this directory for more details.
-
-Example:
---------
-
-&pinctrl {
- #address-cells = <1>;
- #size-cells = <0>;
-
- gpa: gpio@0 {
- compatible = "ingenic,jz4740-gpio";
- reg = <0>;
-
- gpio-controller;
- gpio-ranges = <&pinctrl 0 0 32>;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
-
- interrupt-parent = <&intc>;
- interrupts = <28>;
- };
-};
diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
index 4018ee57a6af..2889bbcd7416 100644
--- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
+++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
@@ -4,8 +4,10 @@ Required Properties:
- compatible: should contain one or more of the following:
- "renesas,gpio-r8a7743": for R8A7743 (RZ/G1M) compatible GPIO controller.
+ - "renesas,gpio-r8a7744": for R8A7744 (RZ/G1N) compatible GPIO controller.
- "renesas,gpio-r8a7745": for R8A7745 (RZ/G1E) compatible GPIO controller.
- "renesas,gpio-r8a77470": for R8A77470 (RZ/G1C) compatible GPIO controller.
+ - "renesas,gpio-r8a774a1": for R8A774A1 (RZ/G2M) compatible GPIO controller.
- "renesas,gpio-r8a7778": for R8A7778 (R-Car M1) compatible GPIO controller.
- "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller.
- "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller.
@@ -22,7 +24,7 @@ Required Properties:
- "renesas,gpio-r8a77995": for R8A77995 (R-Car D3) compatible GPIO controller.
- "renesas,rcar-gen1-gpio": for a generic R-Car Gen1 GPIO controller.
- "renesas,rcar-gen2-gpio": for a generic R-Car Gen2 or RZ/G1 GPIO controller.
- - "renesas,rcar-gen3-gpio": for a generic R-Car Gen3 GPIO controller.
+ - "renesas,rcar-gen3-gpio": for a generic R-Car Gen3 or RZ/G2 GPIO controller.
- "renesas,gpio-rcar": deprecated.
When compatible with the generic version nodes must list the
@@ -38,7 +40,7 @@ Required Properties:
- #gpio-cells: Should be 2. The first cell is the GPIO number and the second
cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
- - gpio-ranges: Range of pins managed by the GPIO controller.
+ - gpio-ranges: See gpio.txt.
Optional properties:
@@ -46,35 +48,44 @@ Optional properties:
mandatory if the hardware implements a controllable functional clock for
the GPIO instance.
-Please refer to gpio.txt in this directory for details of gpio-ranges property
-and the common GPIO bindings used by client devices.
+ - gpio-reserved-ranges: See gpio.txt.
+
+Please refer to gpio.txt in this directory for the common GPIO bindings used by
+client devices.
The GPIO controller also acts as an interrupt controller. It uses the default
two cells specifier as described in Documentation/devicetree/bindings/
interrupt-controller/interrupts.txt.
-Example: R8A7779 (R-Car H1) GPIO controller nodes
+Example: R8A77470 (RZ/G1C) GPIO controller nodes
- gpio0: gpio@ffc40000 {
- compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
- reg = <0xffc40000 0x2c>;
- interrupt-parent = <&gic>;
- interrupts = <0 141 0x4>;
- #gpio-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pfc 0 0 32>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a77470",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 23>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 912>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
+ };
...
- gpio6: gpio@ffc46000 {
- compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
- reg = <0xffc46000 0x2c>;
- interrupt-parent = <&gic>;
- interrupts = <0 147 0x4>;
- #gpio-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pfc 0 192 9>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a77470",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 30>;
+ gpio-reserved-ranges = <17 10>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 909>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt b/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt
new file mode 100644
index 000000000000..1b30812b015b
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt
@@ -0,0 +1,21 @@
+Synopsys GPIO via CREG (Control REGisters) driver
+
+Required properties:
+- compatible : "snps,creg-gpio-hsdk" or "snps,creg-gpio-axs10x".
+- reg : Exactly one register range with length 0x4.
+- #gpio-cells : Since the generic GPIO binding is used, the
+ amount of cells must be specified as 2. The first cell is the
+ pin number, the second cell is used to specify optional parameters:
+ See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
+- gpio-controller : Marks the device node as a GPIO controller.
+- ngpios: Number of GPIO pins.
+
+Example:
+
+gpio: gpio@f00014b0 {
+ compatible = "snps,creg-gpio-hsdk";
+ reg = <0xf00014b0 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <2>;
+};
diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt b/Documentation/devicetree/bindings/hwmon/ina3221.txt
new file mode 100644
index 000000000000..a7b25caa2b8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ina3221.txt
@@ -0,0 +1,44 @@
+Texas Instruments INA3221 Device Tree Bindings
+
+1) ina3221 node
+ Required properties:
+ - compatible: Must be "ti,ina3221"
+ - reg: I2C address
+
+ Optional properties:
+ = The node contains optional child nodes for three channels =
+ = Each child node describes the information of input source =
+
+ - #address-cells: Required only if a child node is present. Must be 1.
+ - #size-cells: Required only if a child node is present. Must be 0.
+
+2) child nodes
+ Required properties:
+ - reg: Must be 0, 1 or 2, corresponding to IN1, IN2 or IN3 port of INA3221
+
+ Optional properties:
+ - label: Name of the input source
+ - shunt-resistor-micro-ohms: Shunt resistor value in micro-Ohm
+
+Example:
+
+ina3221@40 {
+ compatible = "ti,ina3221";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ input@0 {
+ reg = <0x0>;
+ status = "disabled";
+ };
+ input@1 {
+ reg = <0x1>;
+ shunt-resistor-micro-ohms = <5000>;
+ };
+ input@2 {
+ reg = <0x2>;
+ label = "VDD_5V";
+ shunt-resistor-micro-ohms = <5000>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
index bf2a47bbdc58..b428a70a7cc0 100644
--- a/Documentation/devicetree/bindings/hwmon/ltc2978.txt
+++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
@@ -15,6 +15,7 @@ Required properties:
* "lltc,ltm2987"
* "lltc,ltm4675"
* "lltc,ltm4676"
+ * "lltc,ltm4686"
- reg: I2C slave address
Optional properties:
@@ -30,6 +31,7 @@ Valid names of regulators depend on number of supplies supported per device:
* ltc3880, ltc3882, ltc3886 : vout0 - vout1
* ltc3883 : vout0
* ltm4676 : vout0 - vout1
+ * ltm4686 : vout0 - vout1
Example:
ltc2978@5e {
diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
index fbb0a6d8b964..3e4bcc2fb6f7 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
@@ -3,6 +3,7 @@
Required properties :
- compatible : should be "snps,designware-i2c"
+ or "mscc,ocelot-i2c" with "snps,designware-i2c" for fallback
- reg : Offset and length of the register set for the device
- interrupts : <IRQ> where IRQ is the interrupt number.
@@ -11,8 +12,12 @@ Recommended properties :
- clock-frequency : desired I2C bus clock frequency in Hz.
Optional properties :
+ - reg : for "mscc,ocelot-i2c", a second register set to configure the SDA hold
+ time, named ICPU_CFG:TWI_DELAY in the datasheet.
+
- i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds.
- This option is only supported in hardware blocks version 1.11a or newer.
+ This option is only supported in hardware blocks version 1.11a or newer and
+ on Microsemi SoCs ("mscc,ocelot-i2c" compatible).
- i2c-scl-falling-time-ns : should contain the SCL falling time in nanoseconds.
This value which is by default 300ns is used to compute the tLOW period.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
index 091c8dfd3229..b245363d6d60 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
@@ -3,6 +3,7 @@
Required properties:
- compatible :
- "fsl,imx7ulp-lpi2c" for LPI2C compatible with the one integrated on i.MX7ULP soc
+ - "fsl,imx8qxp-lpi2c" for LPI2C compatible with the one integrated on i.MX8QXP soc
- reg : address and length of the lpi2c master registers
- interrupts : lpi2c interrupt
- clocks : lpi2c clock specifier
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
index 39cd21d95810..30c0485b167b 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
@@ -3,7 +3,9 @@ I2C for R-Car platforms
Required properties:
- compatible:
"renesas,i2c-r8a7743" if the device is a part of a R8A7743 SoC.
+ "renesas,i2c-r8a7744" if the device is a part of a R8A7744 SoC.
"renesas,i2c-r8a7745" if the device is a part of a R8A7745 SoC.
+ "renesas,i2c-r8a77470" if the device is a part of a R8A77470 SoC.
"renesas,i2c-r8a774a1" if the device is a part of a R8A774A1 SoC.
"renesas,i2c-r8a7778" if the device is a part of a R8A7778 SoC.
"renesas,i2c-r8a7779" if the device is a part of a R8A7779 SoC.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt b/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
index 872673adff5a..d81b62643655 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
@@ -5,6 +5,7 @@ Required properties:
- "renesas,iic-r8a73a4" (R-Mobile APE6)
- "renesas,iic-r8a7740" (R-Mobile A1)
- "renesas,iic-r8a7743" (RZ/G1M)
+ - "renesas,iic-r8a7744" (RZ/G1N)
- "renesas,iic-r8a7745" (RZ/G1E)
- "renesas,iic-r8a774a1" (RZ/G2M)
- "renesas,iic-r8a7790" (R-Car H2)
diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
index 11263982470e..44efafdfd7f5 100644
--- a/Documentation/devicetree/bindings/i2c/i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c.txt
@@ -84,7 +84,7 @@ Binding may contain optional "interrupts" property, describing interrupts
used by the device. I2C core will assign "irq" interrupt (or the very first
interrupt if not using interrupt names) as primary interrupt for the slave.
-Alternatively, devices supporting SMbus Host Notify, and connected to
+Alternatively, devices supporting SMBus Host Notify, and connected to
adapters that support this feature, may use "host-notify" property. I2C
core will create a virtual interrupt for Host Notify and assign it as
primary interrupt for the slave.
diff --git a/Documentation/devicetree/bindings/iio/accel/adxl372.txt b/Documentation/devicetree/bindings/iio/accel/adxl372.txt
new file mode 100644
index 000000000000..a289964756a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adxl372.txt
@@ -0,0 +1,33 @@
+Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
+
+http://www.analog.com/media/en/technical-documentation/data-sheets/adxl372.pdf
+
+Required properties:
+ - compatible : should be "adi,adxl372"
+ - reg: the I2C address or SPI chip select number for the device
+
+Required properties for SPI bus usage:
+ - spi-max-frequency: Max SPI frequency to use
+
+Optional properties:
+ - interrupts: interrupt mapping for IRQ as documented in
+ Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+Example for a I2C device node:
+
+ accelerometer@53 {
+ compatible = "adi,adxl372";
+ reg = <0x53>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+Example for a SPI device node:
+
+ accelerometer@0 {
+ compatible = "adi,adxl372";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ };
diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3911.txt b/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
new file mode 100644
index 000000000000..3071f48fb30b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
@@ -0,0 +1,30 @@
+* Microchip MCP3911 Dual channel analog front end (ADC)
+
+Required properties:
+ - compatible: Should be "microchip,mcp3911"
+ - reg: SPI chip select number for the device
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt.
+ Max frequency for this chip is 20MHz.
+
+Optional properties:
+ - clocks: Phandle and clock identifier for sampling clock
+ - interrupt-parent: Phandle to the parent interrupt controller
+ - interrupts: IRQ line for the ADC
+ - microchip,device-addr: Device address when multiple MCP3911 chips are present on the
+ same SPI bus. Valid values are 0-3. Defaults to 0.
+ - vref-supply: Phandle to the external reference voltage supply.
+
+Example:
+adc@0 {
+ compatible = "microchip,mcp3911";
+ reg = <0>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <15 IRQ_TYPE_EDGE_RISING>;
+ spi-max-frequency = <20000000>;
+ microchip,device-addr = <0>;
+ vref-supply = <&vref_reg>;
+ clocks = <&xtal>;
+};
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
index 0fb46137f936..b3c86f4ac7cd 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
@@ -1,7 +1,9 @@
-Qualcomm's SPMI PMIC voltage ADC
+Qualcomm's SPMI PMIC ADC
-SPMI PMIC voltage ADC (VADC) provides interface to clients to read
-voltage. The VADC is a 15-bit sigma-delta ADC.
+- SPMI PMIC voltage ADC (VADC) provides interface to clients to read
+ voltage. The VADC is a 15-bit sigma-delta ADC.
+- SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read
+ voltage. The VADC is a 16-bit sigma-delta ADC.
VADC node:
@@ -9,11 +11,13 @@ VADC node:
Usage: required
Value type: <string>
Definition: Should contain "qcom,spmi-vadc".
+ Should contain "qcom,spmi-adc5" for PMIC5 ADC driver.
+ Should contain "qcom,spmi-adc-rev2" for PMIC rev2 ADC driver.
- reg:
Usage: required
Value type: <prop-encoded-array>
- Definition: VADC base address and length in the SPMI PMIC register map.
+ Definition: VADC base address in the SPMI PMIC register map.
- #address-cells:
Usage: required
@@ -45,13 +49,26 @@ Channel node properties:
Definition: ADC channel number.
See include/dt-bindings/iio/qcom,spmi-vadc.h
+- label:
+ Usage: required for "qcom,spmi-adc5" and "qcom,spmi-adc-rev2"
+ Value type: <empty>
+ Definition: ADC input of the platform as seen in the schematics.
+ For thermistor inputs connected to generic AMUX or GPIO inputs
+ these can vary across platform for the same pins. Hence select
+ the platform schematics name for this channel.
+
- qcom,decimation:
Usage: optional
Value type: <u32>
Definition: This parameter is used to decrease ADC sampling rate.
Quicker measurements can be made by reducing decimation ratio.
- Valid values are 512, 1024, 2048, 4096.
- If property is not found, default value of 512 will be used.
+ - For compatible property "qcom,spmi-vadc", valid values are
+ 512, 1024, 2048, 4096. If property is not found, default value
+ of 512 will be used.
+ - For compatible property "qcom,spmi-adc5", valid values are 250, 420
+ and 840. If property is not found, default value of 840 is used.
+ - For compatible property "qcom,spmi-adc-rev2", valid values are 256,
+ 512 and 1024. If property is not present, default value is 1024.
- qcom,pre-scaling:
Usage: optional
@@ -66,21 +83,38 @@ Channel node properties:
- qcom,ratiometric:
Usage: optional
Value type: <empty>
- Definition: Channel calibration type. If this property is specified
- VADC will use the VDD reference (1.8V) and GND for channel
- calibration. If property is not found, channel will be
- calibrated with 0.625V and 1.25V reference channels, also
- known as absolute calibration.
+ Definition: Channel calibration type.
+ - For compatible property "qcom,spmi-vadc", if this property is
+ specified VADC will use the VDD reference (1.8V) and GND for
+ channel calibration. If property is not found, channel will be
+ calibrated with 0.625V and 1.25V reference channels, also
+ known as absolute calibration.
+ - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
+ if this property is specified VADC will use the VDD reference
+ (1.875V) and GND for channel calibration. If property is not found,
+ channel will be calibrated with 0V and 1.25V reference channels,
+ also known as absolute calibration.
- qcom,hw-settle-time:
Usage: optional
Value type: <u32>
Definition: Time between AMUX getting configured and the ADC starting
- conversion. Delay = 100us * (value) for value < 11, and
- 2ms * (value - 10) otherwise.
- Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800,
- 900 us and 1, 2, 4, 6, 8, 10 ms
- If property is not found, channel will use 0us.
+ conversion. The 'hw_settle_time' is an index used from valid values
+ and programmed in hardware to achieve the hardware settling delay.
+ - For compatible property "qcom,spmi-vadc" and "qcom,spmi-adc-rev2",
+ Delay = 100us * (hw_settle_time) for hw_settle_time < 11,
+ and 2ms * (hw_settle_time - 10) otherwise.
+ Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800,
+ 900 us and 1, 2, 4, 6, 8, 10 ms.
+ If property is not found, channel will use 0us.
+ - For compatible property "qcom,spmi-adc5", delay = 15us for
+ value 0, 100us * (value) for values < 11,
+ and 2ms * (value - 10) otherwise.
+ Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 800,
+ 900 us and 1, 2, 4, 6, 8, 10 ms
+ Certain controller digital versions have valid values of
+ 15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms
+ If property is not found, channel will use 15us.
- qcom,avg-samples:
Usage: optional
@@ -89,13 +123,18 @@ Channel node properties:
Averaging provides the option to obtain a single measurement
from the ADC that is an average of multiple samples. The value
selected is 2^(value).
- Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
- If property is not found, 1 sample will be used.
+ - For compatible property "qcom,spmi-vadc", valid values
+ are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
+ If property is not found, 1 sample will be used.
+ - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
+ valid values are: 1, 2, 4, 8, 16
+ If property is not found, 1 sample will be used.
NOTE:
-Following channels, also known as reference point channels, are used for
-result calibration and their channel configuration nodes should be defined:
+For compatible property "qcom,spmi-vadc" following channels, also known as
+reference point channels, are used for result calibration and their channel
+configuration nodes should be defined:
VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV,
VADC_GND_REF and VADC_VDD_VADC.
@@ -104,7 +143,7 @@ Example:
/* VADC node */
pmic_vadc: vadc@3100 {
compatible = "qcom,spmi-vadc";
- reg = <0x3100 0x100>;
+ reg = <0x3100>;
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt b/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt
index 8aad960de50b..b4daa15dcf15 100644
--- a/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt
@@ -12,6 +12,8 @@ Required properties:
- interrupts: The interrupt number for the ADC device.
- #io-channel-cells: Number of cells in an IIO specifier.
- hwlocks: Reference to a phandle of a hwlock provider node.
+- nvmem-cells: A phandle to the calibration cells provided by eFuse device.
+- nvmem-cell-names: Should be "big_scale_calib", "small_scale_calib".
Example:
@@ -32,5 +34,7 @@ Example:
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
#io-channel-cells = <1>;
hwlocks = <&hwlock 4>;
+ nvmem-cells = <&adc_big_scale>, <&adc_small_scale>;
+ nvmem-cell-names = "big_scale_calib", "small_scale_calib";
};
};
diff --git a/Documentation/devicetree/bindings/iio/dac/ad5758.txt b/Documentation/devicetree/bindings/iio/dac/ad5758.txt
index bba01a5cab1b..2f607f41f9d3 100644
--- a/Documentation/devicetree/bindings/iio/dac/ad5758.txt
+++ b/Documentation/devicetree/bindings/iio/dac/ad5758.txt
@@ -50,6 +50,9 @@ Required properties:
Optional properties:
+ - reset-gpios : GPIO spec for the RESET pin. If specified, it will be
+ asserted during driver probe.
+
- adi,dc-dc-ilim-microamp: The dc-to-dc converter current limit
The following values are currently supported [uA]:
* 150000
@@ -71,6 +74,8 @@ AD5758 Example:
spi-max-frequency = <1000000>;
spi-cpha;
+ reset-gpios = <&gpio 22 0>;
+
adi,dc-dc-mode = <2>;
adi,range-microvolt = <0 10000000>;
adi,dc-dc-ilim-microamp = <200000>;
diff --git a/Documentation/devicetree/bindings/iio/dac/ltc1660.txt b/Documentation/devicetree/bindings/iio/dac/ltc1660.txt
new file mode 100644
index 000000000000..c5b5f22d6c64
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ltc1660.txt
@@ -0,0 +1,21 @@
+* Linear Technology Micropower octal 8-Bit and 10-Bit DACs
+
+Required properties:
+ - compatible: Must be one of the following:
+ "lltc,ltc1660"
+ "lltc,ltc1665"
+ - reg: SPI chip select number for the device
+ - vref-supply: Phandle to the voltage reference supply
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt.
+ Max frequency for this chip is 5 MHz.
+
+Example:
+dac@0 {
+ compatible = "lltc,ltc1660";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ vref-supply = <&vref_reg>;
+};
diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
index b2f27da847b8..6ab9a9d196b0 100644
--- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
+++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
@@ -20,6 +20,7 @@ Required properties:
bindings.
Optional properties:
+ - vddio-supply: regulator phandle for VDDIO supply
- mount-matrix: an optional 3x3 mounting rotation matrix
- i2c-gate node. These devices also support an auxiliary i2c bus. This is
simple enough to be described using the i2c-gate binding. See
diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
index ea2d6e0ae4c5..879322ad50fd 100644
--- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
+++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
@@ -7,6 +7,7 @@ Required properties:
"st,lsm6dsl"
"st,lsm6dsm"
"st,ism330dlc"
+ "st,lsm6dso"
- reg: i2c address of the sensor / spi cs line
Optional properties:
diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.txt b/Documentation/devicetree/bindings/iio/light/bh1750.txt
new file mode 100644
index 000000000000..1e7685797d7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/bh1750.txt
@@ -0,0 +1,18 @@
+ROHM BH1750 - ALS, Ambient light sensor
+
+Required properties:
+
+- compatible: Must be one of:
+ "rohm,bh1710"
+ "rohm,bh1715"
+ "rohm,bh1721"
+ "rohm,bh1750"
+ "rohm,bh1751"
+- reg: the I2C address of the sensor
+
+Example:
+
+light-sensor@23 {
+ compatible = "rohm,bh1750";
+ reg = <0x23>;
+};
diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.txt b/Documentation/devicetree/bindings/iio/light/tsl2772.txt
new file mode 100644
index 000000000000..1c5e6f17a1df
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/tsl2772.txt
@@ -0,0 +1,42 @@
+* AMS/TAOS ALS and proximity sensor
+
+Required properties:
+
+ - compatible: Should be one of
+ "amstaos,tsl2571"
+ "amstaos,tsl2671"
+ "amstaos,tmd2671"
+ "amstaos,tsl2771"
+ "amstaos,tmd2771"
+ "amstaos,tsl2572"
+ "amstaos,tsl2672"
+ "amstaos,tmd2672"
+ "amstaos,tsl2772"
+ "amstaos,tmd2772"
+ "avago,apds9930"
+ - reg: the I2C address of the device
+
+Optional properties:
+
+ - amstaos,proximity-diodes - proximity diodes to enable. <0>, <1>, or <0 1>
+ are the only valid values.
+ - led-max-microamp - current for the proximity LED. Must be 100000, 50000,
+ 25000, or 13000.
+ - vdd-supply: phandle to the regulator that provides power to the sensor.
+ - vddio-supply: phandle to the regulator that provides power to the bus.
+ - interrupts: the sole interrupt generated by the device
+
+ Refer to interrupt-controller/interrupts.txt for generic interrupt client
+ node bindings.
+
+Example:
+
+tsl2772@39 {
+ compatible = "amstaos,tsl2772";
+ reg = <0x39>;
+ interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pm8941_l17>;
+ vddio-supply = <&pm8941_lvs1>;
+ amstaos,proximity-diodes = <0>;
+ led-max-microamp = <100000>;
+};
diff --git a/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt b/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt
new file mode 100644
index 000000000000..aac5f621f8dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt
@@ -0,0 +1,12 @@
+ST VL53L0X ToF ranging sensor
+
+Required properties:
+ - compatible: must be "st,vl53l0x"
+ - reg: i2c address where to find the device
+
+Example:
+
+vl53l0x@29 {
+ compatible = "st,vl53l0x";
+ reg = <0x29>;
+};
diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.txt b/Documentation/devicetree/bindings/input/pwm-vibrator.txt
index 09145d18491d..88c775a3fe21 100644
--- a/Documentation/devicetree/bindings/input/pwm-vibrator.txt
+++ b/Documentation/devicetree/bindings/input/pwm-vibrator.txt
@@ -58,8 +58,8 @@ Example from Motorola Droid 4:
vibrator {
compatible = "pwm-vibrator";
- pwms = <&pwm8 0 1000000000 0>,
- <&pwm9 0 1000000000 0>;
+ pwms = <&pwm9 0 1000000000 0>,
+ <&pwm8 0 1000000000 0>;
pwm-names = "enable", "direction";
direction-duty-cycle-ns = <1000000000>;
};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
index d092d5d033a0..8641a2d70851 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
@@ -1,10 +1,12 @@
General Touchscreen Properties:
Optional properties for Touchscreens:
+ - touchscreen-min-x : minimum x coordinate reported (0 if not set)
+ - touchscreen-min-y : minimum y coordinate reported (0 if not set)
- touchscreen-size-x : horizontal resolution of touchscreen
- (in pixels)
+ (maximum x coordinate reported + 1)
- touchscreen-size-y : vertical resolution of touchscreen
- (in pixels)
+ (maximum y coordinate reported + 1)
- touchscreen-max-pressure : maximum reported pressure (arbitrary range
dependent on the controller)
- touchscreen-min-pressure : minimum pressure on the touchscreen to be
diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt
new file mode 100644
index 000000000000..44286dcbac62
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt
@@ -0,0 +1,62 @@
+==============================
+C-SKY APB Interrupt Controller
+==============================
+
+C-SKY APB Interrupt Controller is a simple soc interrupt controller
+on the apb bus and we only use it as root irq controller.
+
+ - csky,apb-intc is used in a lot of csky fpgas and socs, it support 64 irq nums.
+ - csky,dual-apb-intc consists of 2 apb-intc and 128 irq nums supported.
+ - csky,gx6605s-intc is gx6605s soc internal irq interrupt controller, 64 irq nums.
+
+=============================
+intc node bindings definition
+=============================
+
+ Description: Describes APB interrupt controller
+
+ PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: must be "csky,apb-intc"
+ "csky,dual-apb-intc"
+ "csky,gx6605s-intc"
+ - #interrupt-cells
+ Usage: required
+ Value type: <u32>
+ Definition: must be <1>
+ - reg
+ Usage: required
+ Value type: <u32 u32>
+ Definition: <phyaddr size> in soc from cpu view
+ - interrupt-controller:
+ Usage: required
+ - csky,support-pulse-signal:
+ Usage: select
+ Description: to support pulse signal flag
+
+Examples:
+---------
+
+ intc: interrupt-controller@500000 {
+ compatible = "csky,apb-intc";
+ #interrupt-cells = <1>;
+ reg = <0x00500000 0x400>;
+ interrupt-controller;
+ };
+
+ intc: interrupt-controller@500000 {
+ compatible = "csky,dual-apb-intc";
+ #interrupt-cells = <1>;
+ reg = <0x00500000 0x400>;
+ interrupt-controller;
+ };
+
+ intc: interrupt-controller@500000 {
+ compatible = "csky,gx6605s-intc";
+ #interrupt-cells = <1>;
+ reg = <0x00500000 0x400>;
+ interrupt-controller;
+ };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
new file mode 100644
index 000000000000..ab921f1698fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
@@ -0,0 +1,40 @@
+===========================================
+C-SKY Multi-processors Interrupt Controller
+===========================================
+
+C-SKY Multi-processors Interrupt Controller is designed for ck807/ck810/ck860
+SMP soc, and it also could be used in non-SMP system.
+
+Interrupt number definition:
+
+ 0-15 : software irq, and we use 15 as our IPI_IRQ.
+ 16-31 : private irq, and we use 16 as the co-processor timer.
+ 31-1024: common irq for soc ip.
+
+=============================
+intc node bindings definition
+=============================
+
+ Description: Describes SMP interrupt controller
+
+ PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: must be "csky,mpintc"
+ - #interrupt-cells
+ Usage: required
+ Value type: <u32>
+ Definition: must be <1>
+ - interrupt-controller:
+ Usage: required
+
+Examples:
+---------
+
+ intc: interrupt-controller {
+ compatible = "csky,mpintc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt
index aa8bf2ec8905..1c94a57a661e 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt
@@ -5,6 +5,8 @@ The Marvell ICU (Interrupt Consolidation Unit) controller is
responsible for collecting all wired-interrupt sources in the CP and
communicating them to the GIC in the AP, the unit translates interrupt
requests on input wires to MSG memory mapped transactions to the GIC.
+These messages will access a different GIC memory area depending on
+their type (NSR, SR, SEI, REI, etc).
Required properties:
@@ -12,20 +14,23 @@ Required properties:
- reg: Should contain ICU registers location and length.
-- #interrupt-cells: Specifies the number of cells needed to encode an
- interrupt source. The value shall be 3.
+Subnodes: Each group of interrupt is declared as a subnode of the ICU,
+with their own compatible.
+
+Required properties for the icu_nsr/icu_sei subnodes:
- The 1st cell is the group type of the ICU interrupt. Possible group
- types are:
+- compatible: Should be one of:
+ * "marvell,cp110-icu-nsr"
+ * "marvell,cp110-icu-sr"
+ * "marvell,cp110-icu-sei"
+ * "marvell,cp110-icu-rei"
- ICU_GRP_NSR (0x0) : Shared peripheral interrupt, non-secure
- ICU_GRP_SR (0x1) : Shared peripheral interrupt, secure
- ICU_GRP_SEI (0x4) : System error interrupt
- ICU_GRP_REI (0x5) : RAM error interrupt
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 2.
- The 2nd cell is the index of the interrupt in the ICU unit.
+ The 1st cell is the index of the interrupt in the ICU unit.
- The 3rd cell is the type of the interrupt. See arm,gic.txt for
+ The 2nd cell is the type of the interrupt. See arm,gic.txt for
details.
- interrupt-controller: Identifies the node as an interrupt
@@ -35,17 +40,73 @@ Required properties:
that allows to trigger interrupts using MSG memory mapped
transactions.
+Note: each 'interrupts' property referring to any 'icu_xxx' node shall
+ have a different number within [0:206].
+
Example:
icu: interrupt-controller@1e0000 {
compatible = "marvell,cp110-icu";
- reg = <0x1e0000 0x10>;
+ reg = <0x1e0000 0x440>;
+
+ CP110_LABEL(icu_nsr): interrupt-controller@10 {
+ compatible = "marvell,cp110-icu-nsr";
+ reg = <0x10 0x20>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ msi-parent = <&gicp>;
+ };
+
+ CP110_LABEL(icu_sei): interrupt-controller@50 {
+ compatible = "marvell,cp110-icu-sei";
+ reg = <0x50 0x10>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ msi-parent = <&sei>;
+ };
+};
+
+node1 {
+ interrupt-parent = <&icu_nsr>;
+ interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+node2 {
+ interrupt-parent = <&icu_sei>;
+ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+/* Would not work with the above nodes */
+node3 {
+ interrupt-parent = <&icu_nsr>;
+ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+The legacy bindings were different in this way:
+
+- #interrupt-cells: The value was 3.
+ The 1st cell was the group type of the ICU interrupt. Possible
+ group types were:
+ ICU_GRP_NSR (0x0) : Shared peripheral interrupt, non-secure
+ ICU_GRP_SR (0x1) : Shared peripheral interrupt, secure
+ ICU_GRP_SEI (0x4) : System error interrupt
+ ICU_GRP_REI (0x5) : RAM error interrupt
+ The 2nd cell was the index of the interrupt in the ICU unit.
+ The 3rd cell was the type of the interrupt. See arm,gic.txt for
+ details.
+
+Example:
+
+icu: interrupt-controller@1e0000 {
+ compatible = "marvell,cp110-icu";
+ reg = <0x1e0000 0x440>;
+
#interrupt-cells = <3>;
interrupt-controller;
msi-parent = <&gicp>;
};
-usb3h0: usb3@500000 {
+node1 {
interrupt-parent = <&icu>;
interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt
new file mode 100644
index 000000000000..0beafed502f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt
@@ -0,0 +1,36 @@
+Marvell SEI (System Error Interrupt) Controller
+-----------------------------------------------
+
+Marvell SEI (System Error Interrupt) controller is an interrupt
+aggregator. It receives interrupts from several sources and aggregates
+them to a single interrupt line (an SPI) on the parent interrupt
+controller.
+
+This interrupt controller can handle up to 64 SEIs, a set comes from the
+AP and is wired while a second set comes from the CPs by the mean of
+MSIs.
+
+Required properties:
+
+- compatible: should be one of:
+ * "marvell,ap806-sei"
+- reg: SEI registers location and length.
+- interrupts: identifies the parent IRQ that will be triggered.
+- #interrupt-cells: number of cells to define an SEI wired interrupt
+ coming from the AP, should be 1. The cell is the IRQ
+ number.
+- interrupt-controller: identifies the node as an interrupt controller
+ for AP interrupts.
+- msi-controller: identifies the node as an MSI controller for the CPs
+ interrupts.
+
+Example:
+
+ sei: interrupt-controller@3f0200 {
+ compatible = "marvell,ap806-sei";
+ reg = <0x3f0200 0x40>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ msi-controller;
+ };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt
index a046ed374d80..8de96a4fb2d5 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt
@@ -2,10 +2,12 @@ DT bindings for the R-Mobile/R-Car/RZ/G interrupt controller
Required properties:
-- compatible: has to be "renesas,irqc-<soctype>", "renesas,irqc" as fallback.
+- compatible: must be "renesas,irqc-<soctype>" or "renesas,intc-ex-<soctype>",
+ and "renesas,irqc" as fallback.
Examples with soctypes are:
- "renesas,irqc-r8a73a4" (R-Mobile APE6)
- "renesas,irqc-r8a7743" (RZ/G1M)
+ - "renesas,irqc-r8a7744" (RZ/G1N)
- "renesas,irqc-r8a7745" (RZ/G1E)
- "renesas,irqc-r8a77470" (RZ/G1C)
- "renesas,irqc-r8a7790" (R-Car H2)
@@ -19,6 +21,7 @@ Required properties:
- "renesas,intc-ex-r8a77965" (R-Car M3-N)
- "renesas,intc-ex-r8a77970" (R-Car V3M)
- "renesas,intc-ex-r8a77980" (R-Car V3H)
+ - "renesas,intc-ex-r8a77990" (R-Car E3)
- "renesas,intc-ex-r8a77995" (R-Car D3)
- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
interrupts.txt in this directory
diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
index df5db732138d..6922db598def 100644
--- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
@@ -41,6 +41,8 @@ Required properties:
- compatible : must be one of the following string:
"mediatek,mt2701-m4u" for mt2701 which uses generation one m4u HW.
"mediatek,mt2712-m4u" for mt2712 which uses generation two m4u HW.
+ "mediatek,mt7623-m4u", "mediatek,mt2701-m4u" for mt7623 which uses
+ generation one m4u HW.
"mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW.
- reg : m4u register base and size.
- interrupts : the interrupt of m4u.
@@ -51,7 +53,7 @@ Required properties:
according to the local arbiter index, like larb0, larb1, larb2...
- iommu-cells : must be 1. This is the mtk_m4u_id according to the HW.
Specifies the mtk_m4u_id as defined in
- dt-binding/memory/mt2701-larb-port.h for mt2701,
+ dt-binding/memory/mt2701-larb-port.h for mt2701, mt7623
dt-binding/memory/mt2712-larb-port.h for mt2712, and
dt-binding/memory/mt8173-larb-port.h for mt8173.
diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt
index c6e2d855fe13..377ee639d103 100644
--- a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt
+++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt
@@ -12,6 +12,7 @@ Required Properties:
- "renesas,ipmmu-r8a73a4" for the R8A73A4 (R-Mobile APE6) IPMMU.
- "renesas,ipmmu-r8a7743" for the R8A7743 (RZ/G1M) IPMMU.
+ - "renesas,ipmmu-r8a7744" for the R8A7744 (RZ/G1N) IPMMU.
- "renesas,ipmmu-r8a7745" for the R8A7745 (RZ/G1E) IPMMU.
- "renesas,ipmmu-r8a7790" for the R8A7790 (R-Car H2) IPMMU.
- "renesas,ipmmu-r8a7791" for the R8A7791 (R-Car M2-W) IPMMU.
diff --git a/Documentation/devicetree/bindings/leds/leds-an30259a.txt b/Documentation/devicetree/bindings/leds/leds-an30259a.txt
new file mode 100644
index 000000000000..6ffb861083c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-an30259a.txt
@@ -0,0 +1,43 @@
+* Panasonic AN30259A 3-channel LED driver
+
+The AN30259A is a LED controller capable of driving three LEDs independently. It supports
+constant current output and sloping current output modes. The chip is connected over I2C.
+
+Required properties:
+ - compatible: Must be "panasonic,an30259a".
+ - reg: I2C slave address.
+ - #address-cells: Must be 1.
+ - #size-cells: Must be 0.
+
+Each LED is represented as a sub-node of the panasonic,an30259a node.
+
+Required sub-node properties:
+ - reg: Pin that the LED is connected to. Must be 1, 2, or 3.
+
+Optional sub-node properties:
+ - label: see Documentation/devicetree/bindings/leds/common.txt
+ - linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+led-controller@30 {
+ compatible = "panasonic,an30259a";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ linux,default-trigger = "heartbeat";
+ label = "red:indicator";
+ };
+
+ led@2 {
+ reg = <2>;
+ label = "green:indicator";
+ };
+
+ led@3 {
+ reg = <3>;
+ label = "blue:indicator";
+ };
+};
diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt
index 6e8a9ab0fdae..1232fc9fc709 100644
--- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt
+++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt
@@ -11,6 +11,7 @@ platforms.
"qcom,msm8916-apcs-kpss-global",
"qcom,msm8996-apcs-hmss-global"
"qcom,msm8998-apcs-hmss-global"
+ "qcom,qcs404-apcs-apps-global"
"qcom,sdm845-apss-shared"
- reg:
diff --git a/Documentation/devicetree/bindings/media/cedrus.txt b/Documentation/devicetree/bindings/media/cedrus.txt
new file mode 100644
index 000000000000..a089a0c1ff05
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cedrus.txt
@@ -0,0 +1,54 @@
+Device-tree bindings for the VPU found in Allwinner SoCs, referred to as the
+Video Engine (VE) in Allwinner literature.
+
+The VPU can only access the first 256 MiB of DRAM, that are DMA-mapped starting
+from the DRAM base. This requires specific memory allocation and handling.
+
+Required properties:
+- compatible : must be one of the following compatibles:
+ - "allwinner,sun4i-a10-video-engine"
+ - "allwinner,sun5i-a13-video-engine"
+ - "allwinner,sun7i-a20-video-engine"
+ - "allwinner,sun8i-a33-video-engine"
+ - "allwinner,sun8i-h3-video-engine"
+- reg : register base and length of VE;
+- clocks : list of clock specifiers, corresponding to entries in
+ the clock-names property;
+- clock-names : should contain "ahb", "mod" and "ram" entries;
+- resets : phandle for reset;
+- interrupts : VE interrupt number;
+- allwinner,sram : SRAM region to use with the VE.
+
+Optional properties:
+- memory-region : CMA pool to use for buffers allocation instead of the
+ default CMA pool.
+
+Example:
+
+reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+ cma_pool: cma@4a000000 {
+ compatible = "shared-dma-pool";
+ size = <0x6000000>;
+ alloc-ranges = <0x4a000000 0x6000000>;
+ reusable;
+ linux,cma-default;
+ };
+};
+
+video-codec@1c0e000 {
+ compatible = "allwinner,sun7i-a20-video-engine";
+ reg = <0x01c0e000 0x1000>;
+
+ clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+
+ resets = <&ccu RST_VE>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
+};
diff --git a/Documentation/devicetree/bindings/media/fsl-pxp.txt b/Documentation/devicetree/bindings/media/fsl-pxp.txt
new file mode 100644
index 000000000000..2477e7f87381
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/fsl-pxp.txt
@@ -0,0 +1,26 @@
+Freescale Pixel Pipeline
+========================
+
+The Pixel Pipeline (PXP) is a memory-to-memory graphics processing engine
+that supports scaling, colorspace conversion, alpha blending, rotation, and
+pixel conversion via lookup table. Different versions are present on various
+i.MX SoCs from i.MX23 to i.MX7.
+
+Required properties:
+- compatible: should be "fsl,<soc>-pxp", where SoC can be one of imx23, imx28,
+ imx6dl, imx6sl, imx6ul, imx6sx, imx6ull, or imx7d.
+- reg: the register base and size for the device registers
+- interrupts: the PXP interrupt, two interrupts for imx6ull and imx7d.
+- clock-names: should be "axi"
+- clocks: the PXP AXI clock
+
+Example:
+
+pxp@21cc000 {
+ compatible = "fsl,imx6ull-pxp";
+ reg = <0x021cc000 0x4000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "axi";
+ clocks = <&clks IMX6UL_CLK_PXP>;
+};
diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
index 21ffb5ed8183..5dddc95f9cc4 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
@@ -10,7 +10,11 @@ Required Properties:
- "adi,adv7481" for the ADV7481
- "adi,adv7482" for the ADV7482
- - reg: I2C slave address
+ - reg: I2C slave addresses
+ The ADV748x has up to twelve 256-byte maps that can be accessed via the
+ main I2C ports. Each map has it own I2C address and acts as a standard
+ slave device on the I2C bus. The main address is mandatory, others are
+ optional and remain at default values if not specified.
Optional Properties:
@@ -18,6 +22,11 @@ Optional Properties:
"intrq3". All interrupts are optional. The "intrq3" interrupt
is only available on the adv7481
- interrupts: Specify the interrupt lines for the ADV748x
+ - reg-names : Names of maps with programmable addresses.
+ It shall contain all maps needing a non-default address.
+ Possible map names are:
+ "main", "dpll", "cp", "hdmi", "edid", "repeater",
+ "infoframe", "cbus", "cec", "sdp", "txa", "txb"
The device node must contain one 'port' child node per device input and output
port, in accordance with the video interface bindings defined in
@@ -47,7 +56,10 @@ Example:
video-receiver@70 {
compatible = "adi,adv7482";
- reg = <0x70>;
+ reg = <0x70 0x71 0x72 0x73 0x74 0x75
+ 0x60 0x61 0x62 0x63 0x64 0x65>;
+ reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
+ "infoframe", "cbus", "cec", "sdp", "txa", "txb";
#address-cells = <1>;
#size-cells = <0>;
@@ -73,7 +85,7 @@ Example:
};
};
- port@10 {
+ port@a {
reg = <10>;
adv7482_txa: endpoint {
@@ -83,7 +95,7 @@ Example:
};
};
- port@11 {
+ port@b {
reg = <11>;
adv7482_txb: endpoint {
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
index dcf57e7c60eb..b3e688b77a38 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
@@ -66,7 +66,7 @@ Example:
* other maps will retain their default addresses.
*/
reg = <0x4c>, <0x66>;
- reg-names "main", "edid";
+ reg-names = "main", "edid";
reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>;
hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>;
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807.txt b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt
index c4701f1eaaf6..c4701f1eaaf6 100644
--- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807.txt
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
index 3813947b4d4f..044b11913c49 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
@@ -5,6 +5,7 @@ Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs
Required properties:
- compatible : must be one of the following string:
"mediatek,mt8173-jpgdec"
+ "mediatek,mt7623-jpgdec", "mediatek,mt2701-jpgdec"
"mediatek,mt2701-jpgdec"
- reg : physical base address of the jpeg decoder registers and length of
memory mapped region.
diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
index 2f420050d57f..d329a4e8ac58 100644
--- a/Documentation/devicetree/bindings/media/rcar_vin.txt
+++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
@@ -11,6 +11,7 @@ on Gen3 platforms to a CSI-2 receiver.
- compatible: Must be one or more of the following
- "renesas,vin-r8a7743" for the R8A7743 device
+ - "renesas,vin-r8a7744" for the R8A7744 device
- "renesas,vin-r8a7745" for the R8A7745 device
- "renesas,vin-r8a7778" for the R8A7778 device
- "renesas,vin-r8a7779" for the R8A7779 device
diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.txt b/Documentation/devicetree/bindings/media/renesas,ceu.txt
index 8a7a616e9019..3e2a2652eb19 100644
--- a/Documentation/devicetree/bindings/media/renesas,ceu.txt
+++ b/Documentation/devicetree/bindings/media/renesas,ceu.txt
@@ -17,15 +17,19 @@ Required properties:
The CEU supports a single parallel input and should contain a single 'port'
subnode with a single 'endpoint'. Connection to input devices are modeled
according to the video interfaces OF bindings specified in:
-Documentation/devicetree/bindings/media/video-interfaces.txt
+[1] Documentation/devicetree/bindings/media/video-interfaces.txt
Optional endpoint properties applicable to parallel input bus described in
the above mentioned "video-interfaces.txt" file are supported.
-- hsync-active: Active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
- If property is not present, default is active high.
-- vsync-active: Active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
- If property is not present, default is active high.
+- hsync-active: See [1] for description. If property is not present,
+ default is active high.
+- vsync-active: See [1] for description. If property is not present,
+ default is active high.
+- bus-width: See [1] for description. Accepted values are '8' and '16'.
+ If property is not present, default is '8'.
+- field-even-active: See [1] for description. If property is not present,
+ an even field is identified by a logic 0 (active-low signal).
Example:
diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.txt b/Documentation/devicetree/bindings/media/rockchip-vpu.txt
new file mode 100644
index 000000000000..35dc464ad7c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip-vpu.txt
@@ -0,0 +1,29 @@
+device-tree bindings for rockchip VPU codec
+
+Rockchip (Video Processing Unit) present in various Rockchip platforms,
+such as RK3288 and RK3399.
+
+Required properties:
+- compatible: value should be one of the following
+ "rockchip,rk3288-vpu";
+ "rockchip,rk3399-vpu";
+- interrupts: encoding and decoding interrupt specifiers
+- interrupt-names: should be "vepu" and "vdpu"
+- clocks: phandle to VPU aclk, hclk clocks
+- clock-names: should be "aclk" and "hclk"
+- power-domains: phandle to power domain node
+- iommus: phandle to a iommu node
+
+Example:
+SoC-specific DT entry:
+ vpu: video-codec@ff9a0000 {
+ compatible = "rockchip,rk3288-vpu";
+ reg = <0x0 0xff9a0000 0x0 0x800>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vepu", "vdpu";
+ clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+ clock-names = "aclk", "hclk";
+ power-domains = <&power RK3288_PD_VIDEO>;
+ iommus = <&vpu_mmu>;
+ };
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
index baf9d9756b3c..f884ada0bffc 100644
--- a/Documentation/devicetree/bindings/media/video-interfaces.txt
+++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
@@ -100,10 +100,12 @@ Optional endpoint properties
slave device (data source) by the master device (data sink). In the master
mode the data source device is also the source of the synchronization signals.
- bus-type: data bus type. Possible values are:
- 0 - autodetect based on other properties (MIPI CSI-2 D-PHY, parallel or Bt656)
1 - MIPI CSI-2 C-PHY
2 - MIPI CSI1
3 - CCP2
+ 4 - MIPI CSI-2 D-PHY
+ 5 - Parallel
+ 6 - Bt.656
- bus-width: number of data lines actively used, valid for the parallel busses.
- data-shift: on the parallel data busses, if bus-width is used to specify the
number of data lines, data-shift can be used to specify which data lines are
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
index 615abdd0eb0d..e937ddd871a6 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
@@ -17,6 +17,7 @@ Required properties:
- compatible : must be one of :
"mediatek,mt2701-smi-common"
"mediatek,mt2712-smi-common"
+ "mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common"
"mediatek,mt8173-smi-common"
- reg : the register and size of the SMI block.
- power-domains : a phandle to the power domain of this local arbiter.
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
index 083155cdc2a0..94eddcae77ab 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
@@ -6,6 +6,7 @@ Required properties:
- compatible : must be one of :
"mediatek,mt2701-smi-larb"
"mediatek,mt2712-smi-larb"
+ "mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb"
"mediatek,mt8173-smi-larb"
- reg : the register and size of this local arbiter.
- mediatek,smi : a phandle to the smi_common node.
@@ -16,7 +17,7 @@ Required properties:
the register.
- "smi" : It's the clock for transfer data and command.
-Required property for mt2701 and mt2712:
+Required property for mt2701, mt2712 and mt7623:
- mediatek,larb-id :the hardware id of this larb.
Example:
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index 9b62831fdf3e..148ef621a5e5 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -76,7 +76,7 @@ Deprecated properties:
Also see child specific device properties:
Regulator - ../regulator/arizona-regulator.txt
Extcon - ../extcon/extcon-arizona.txt
- Sound - ../sound/arizona.txt
+ Sound - ../sound/wlf,arizona.txt
Example:
diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
index 7c0d6b2f53e4..7f0cd72f47d2 100644
--- a/Documentation/devicetree/bindings/serial/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
@@ -1,6 +1,6 @@
* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
-Required properties:
+Required properties for USART:
- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"
The compatible <chip> indicated will be the first SoC to support an
additional mode or an USART new feature.
@@ -11,7 +11,13 @@ Required properties:
Required elements: "usart"
- clocks: phandles to input clocks.
-Optional properties:
+Required properties for USART in SPI mode:
+- #size-cells : Must be <0>
+- #address-cells : Must be <1>
+- cs-gpios: chipselects (internal cs not supported)
+- atmel,usart-mode : Must be <AT91_USART_MODE_SPI> (found in dt-bindings/mfd/at91-usart.h)
+
+Optional properties in serial mode:
- atmel,use-dma-rx: use of PDC or DMA for receiving data
- atmel,use-dma-tx: use of PDC or DMA for transmitting data
- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively.
@@ -62,3 +68,18 @@ Example:
dma-names = "tx", "rx";
atmel,fifo-size = <32>;
};
+
+- SPI mode:
+ #include <dt-bindings/mfd/at91-usart.h>
+
+ spi0: spi@f001c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-usart", "atmel,at91sam9260-usart";
+ atmel,usart-mode = <AT91_USART_MODE_SPI>;
+ reg = <0xf001c000 0x100>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
+ cs-gpios = <&pioB 3 0>;
+ };
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
index 3ca56fdb5ffe..a4b056761eaa 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
@@ -1,16 +1,17 @@
-* ROHM BD71837 Power Management Integrated Circuit bindings
+* ROHM BD71837 and BD71847 Power Management Integrated Circuit bindings
-BD71837MWV is a programmable Power Management IC for powering single-core,
-dual-core, and quad-core SoCs such as NXP-i.MX 8M. It is optimized for
-low BOM cost and compact solution footprint. It integrates 8 Buck
-egulators and 7 LDOs to provide all the power rails required by the SoC and
-the commonly used peripherals.
+BD71837MWV and BD71847MWV are programmable Power Management ICs for powering
+single-core, dual-core, and quad-core SoCs such as NXP-i.MX 8M. They are
+optimized for low BOM cost and compact solution footprint. BD71837MWV
+integrates 8 Buck regulators and 7 LDOs. BD71847MWV contains 6 Buck regulators
+and 6 LDOs.
-Datasheet for PMIC is available at:
+Datasheet for BD71837 is available at:
https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e
Required properties:
- - compatible : Should be "rohm,bd71837".
+ - compatible : Should be "rohm,bd71837" for bd71837
+ "rohm,bd71847" for bd71847.
- reg : I2C slave address.
- interrupt-parent : Phandle to the parent interrupt controller.
- interrupts : The interrupt line the device is connected to.
diff --git a/Documentation/devicetree/bindings/mips/mscc.txt b/Documentation/devicetree/bindings/mips/mscc.txt
index ae15ec333542..bc817e984628 100644
--- a/Documentation/devicetree/bindings/mips/mscc.txt
+++ b/Documentation/devicetree/bindings/mips/mscc.txt
@@ -41,3 +41,19 @@ Example:
compatible = "mscc,ocelot-cpu-syscon", "syscon";
reg = <0x70000000 0x2c>;
};
+
+o HSIO regs:
+
+The SoC has a few registers (HSIO) handling miscellaneous functionalities:
+configuration and status of PLL5, RCOMP, SyncE, SerDes configurations and
+status, SerDes muxing and a thermal sensor.
+
+Required properties:
+- compatible: Should be "mscc,ocelot-hsio", "syscon", "simple-mfd"
+- reg : Should contain registers location and length
+
+Example:
+ syscon@10d0000 {
+ compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd";
+ reg = <0x10d0000 0x10000>;
+ };
diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
index 6611a7c2053a..01fdc33a41d0 100644
--- a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
+++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
@@ -9,6 +9,25 @@ blocks that can be used to create functional hardware objects/devices
such as network interfaces, crypto accelerator instances, L2 switches,
etc.
+For an overview of the DPAA2 architecture and fsl-mc bus see:
+Documentation/networking/dpaa2/overview.rst
+
+As described in the above overview, all DPAA2 objects in a DPRC share the
+same hardware "isolation context" and a 10-bit value called an ICID
+(isolation context id) is expressed by the hardware to identify
+the requester.
+
+The generic 'iommus' property is insufficient to describe the relationship
+between ICIDs and IOMMUs, so an iommu-map property is used to define
+the set of possible ICIDs under a root DPRC and how they map to
+an IOMMU.
+
+For generic IOMMU bindings, see
+Documentation/devicetree/bindings/iommu/iommu.txt.
+
+For arm-smmu binding, see:
+Documentation/devicetree/bindings/iommu/arm,smmu.txt.
+
Required properties:
- compatible
@@ -88,14 +107,34 @@ Sub-nodes:
Value type: <phandle>
Definition: Specifies the phandle to the PHY device node associated
with the this dpmac.
+Optional properties:
+
+- iommu-map: Maps an ICID to an IOMMU and associated iommu-specifier
+ data.
+
+ The property is an arbitrary number of tuples of
+ (icid-base,iommu,iommu-base,length).
+
+ Any ICID i in the interval [icid-base, icid-base + length) is
+ associated with the listed IOMMU, with the iommu-specifier
+ (i - icid-base + iommu-base).
Example:
+ smmu: iommu@5000000 {
+ compatible = "arm,mmu-500";
+ #iommu-cells = <1>;
+ stream-match-mask = <0x7C00>;
+ ...
+ };
+
fsl_mc: fsl-mc@80c000000 {
compatible = "fsl,qoriq-mc";
reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
<0x00000000 0x08340000 0 0x40000>; /* MC control reg */
msi-parent = <&its>;
+ /* define map for ICIDs 23-64 */
+ iommu-map = <23 &smmu 23 41>;
#address-cells = <3>;
#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/misc/lwn-bk4.txt b/Documentation/devicetree/bindings/misc/lwn-bk4.txt
new file mode 100644
index 000000000000..d6a8c188c087
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/lwn-bk4.txt
@@ -0,0 +1,26 @@
+* Liebherr's BK4 controller external SPI
+
+A device which handles data acquisition from compatible industrial
+peripherals.
+The SPI is used for data and management purposes in both master and
+slave modes.
+
+Required properties:
+
+- compatible : Should be "lwn,bk4"
+
+Required SPI properties:
+
+- reg : Should be address of the device chip select within
+ the controller.
+
+- spi-max-frequency : Maximum SPI clocking speed of device in Hz, should be
+ 30MHz at most for the Liebherr's BK4 external bus.
+
+Example:
+
+spidev0: spi@0 {
+ compatible = "lwn,bk4";
+ spi-max-frequency = <30000000>;
+ reg = <0>;
+};
diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
index f6ddba31cb73..e2effe17f05e 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
@@ -15,6 +15,7 @@ Required Properties:
- "arasan,sdhci-5.1": generic Arasan SDHCI 5.1 PHY
- "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1": rk3399 eMMC PHY
For this device it is strongly suggested to include arasan,soc-ctl-syscon.
+ - "ti,am654-sdhci-5.1", "arasan,sdhci-5.1": TI AM654 MMC PHY
- reg: From mmc bindings: Register location and length.
- clocks: From clock bindings: Handles to clock inputs.
- clock-names: From clock bindings: Tuple including "clk_xin" and "clk_ahb"
diff --git a/Documentation/devicetree/bindings/mmc/jz4740.txt b/Documentation/devicetree/bindings/mmc/jz4740.txt
index 7cd8c432d7c8..8a6f87f13114 100644
--- a/Documentation/devicetree/bindings/mmc/jz4740.txt
+++ b/Documentation/devicetree/bindings/mmc/jz4740.txt
@@ -7,6 +7,7 @@ described in mmc.txt.
Required properties:
- compatible: Should be one of the following:
- "ingenic,jz4740-mmc" for the JZ4740
+ - "ingenic,jz4725b-mmc" for the JZ4725B
- "ingenic,jz4780-mmc" for the JZ4780
- reg: Should contain the MMC controller registers location and length.
- interrupts: Should contain the interrupt specifier of the MMC controller.
diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt
index 03796cf2d3e7..6d3c626e017d 100644
--- a/Documentation/devicetree/bindings/mmc/mmci.txt
+++ b/Documentation/devicetree/bindings/mmc/mmci.txt
@@ -15,8 +15,11 @@ Required properties:
Optional properties:
- arm,primecell-periphid : contains the PrimeCell Peripheral ID, it overrides
the ID provided by the HW
+- resets : phandle to internal reset line.
+ Should be defined for sdmmc variant.
- vqmmc-supply : phandle to the regulator device tree node, mentioned
as the VCCQ/VDD_IO supply in the eMMC/SD specs.
+specific for ux500 variant:
- st,sig-dir-dat0 : bus signal direction pin used for DAT[0].
- st,sig-dir-dat2 : bus signal direction pin used for DAT[2].
- st,sig-dir-dat31 : bus signal direction pin used for DAT[3] and DAT[1].
@@ -24,6 +27,14 @@ Optional properties:
- st,sig-dir-cmd : cmd signal direction pin used for CMD.
- st,sig-pin-fbclk : feedback clock signal pin used.
+specific for sdmmc variant:
+- st,sig-dir : signal direction polarity used for cmd, dat0 dat123.
+- st,neg-edge : data & command phase relation, generated on
+ sd clock falling edge.
+- st,use-ckin : use ckin pin from an external driver to sample
+ the receive data (example: with voltage
+ switch transceiver).
+
Deprecated properties:
- mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable.
- mmc-cap-sd-highspeed : indicates whether SD is high speed capable.
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
index f33467a54a05..f5bcda3980cc 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
@@ -10,6 +10,7 @@ Required properties:
- compatible: value should be either of the following.
"mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
"mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
+ "mediatek,mt8183-mmc": for mmc host ip compatible with mt8183
"mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
"mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
"mediatek,mt7622-mmc": for MT7622 SoC
@@ -22,6 +23,7 @@ Required properties:
"source" - source clock (required)
"hclk" - HCLK which used for host (required)
"source_cg" - independent source clock gate (required for MT2712)
+ "bus_clk" - bus clock used for internal register access (required for MT2712 MSDC0/3)
- pinctrl-names: should be "default", "state_uhs"
- pinctrl-0: should contain default/high speed pin ctrl
- pinctrl-1: should contain uhs mode pin ctrl
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
index 9bce57862ed6..32b4b4e41923 100644
--- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
@@ -38,3 +38,75 @@ sdhci@c8000200 {
power-gpios = <&gpio 155 0>; /* gpio PT3 */
bus-width = <8>;
};
+
+Optional properties for Tegra210 and Tegra186:
+- pinctrl-names, pinctrl-0, pinctrl-1 : Specify pad voltage
+ configurations. Valid pinctrl-names are "sdmmc-3v3" and "sdmmc-1v8"
+ for controllers supporting multiple voltage levels. The order of names
+ should correspond to the pin configuration states in pinctrl-0 and
+ pinctrl-1.
+- nvidia,only-1-8-v : The presence of this property indicates that the
+ controller operates at a 1.8 V fixed I/O voltage.
+- nvidia,pad-autocal-pull-up-offset-3v3,
+ nvidia,pad-autocal-pull-down-offset-3v3 : Specify drive strength
+ calibration offsets for 3.3 V signaling modes.
+- nvidia,pad-autocal-pull-up-offset-1v8,
+ nvidia,pad-autocal-pull-down-offset-1v8 : Specify drive strength
+ calibration offsets for 1.8 V signaling modes.
+- nvidia,pad-autocal-pull-up-offset-3v3-timeout,
+ nvidia,pad-autocal-pull-down-offset-3v3-timeout : Specify drive
+ strength used as a fallback in case the automatic calibration times
+ out on a 3.3 V signaling mode.
+- nvidia,pad-autocal-pull-up-offset-1v8-timeout,
+ nvidia,pad-autocal-pull-down-offset-1v8-timeout : Specify drive
+ strength used as a fallback in case the automatic calibration times
+ out on a 1.8 V signaling mode.
+- nvidia,pad-autocal-pull-up-offset-sdr104,
+ nvidia,pad-autocal-pull-down-offset-sdr104 : Specify drive strength
+ calibration offsets for SDR104 mode.
+- nvidia,pad-autocal-pull-up-offset-hs400,
+ nvidia,pad-autocal-pull-down-offset-hs400 : Specify drive strength
+ calibration offsets for HS400 mode.
+- nvidia,default-tap : Specify the default inbound sampling clock
+ trimmer value for non-tunable modes.
+- nvidia,default-trim : Specify the default outbound clock trimmer
+ value.
+- nvidia,dqs-trim : Specify DQS trim value for HS400 timing
+
+ Notes on the pad calibration pull up and pulldown offset values:
+ - The property values are drive codes which are programmed into the
+ PD_OFFSET and PU_OFFSET sections of the
+ SDHCI_TEGRA_AUTO_CAL_CONFIG register.
+ - A higher value corresponds to higher drive strength. Please refer
+ to the reference manual of the SoC for correct values.
+ - The SDR104 and HS400 timing specific values are used in
+ corresponding modes if specified.
+
+ Notes on tap and trim values:
+ - The values are used for compensating trace length differences
+ by adjusting the sampling point.
+ - The values are programmed to the Vendor Clock Control Register.
+ Please refer to the reference manual of the SoC for correct
+ values.
+ - The DQS trim values are only used on controllers which support
+ HS400 timing. Only SDMMC4 on Tegra210 and Tegra 186 supports
+ HS400.
+
+Example:
+sdhci@700b0000 {
+ compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+ reg = <0x0 0x700b0000 0x0 0x200>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
+ clock-names = "sdhci";
+ resets = <&tegra_car 14>;
+ reset-names = "sdhci";
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc1_3v3>;
+ pinctrl-1 = <&sdmmc1_1v8>;
+ nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+ nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+ nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+ nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
index 5ff1e12c655a..c064af5838aa 100644
--- a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
+++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
@@ -12,6 +12,7 @@ Required properties:
- "renesas,mmcif-r8a73a4" for the MMCIF found in r8a73a4 SoCs
- "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs
- "renesas,mmcif-r8a7743" for the MMCIF found in r8a7743 SoCs
+ - "renesas,mmcif-r8a7744" for the MMCIF found in r8a7744 SoCs
- "renesas,mmcif-r8a7745" for the MMCIF found in r8a7745 SoCs
- "renesas,mmcif-r8a7778" for the MMCIF found in r8a7778 SoCs
- "renesas,mmcif-r8a7790" for the MMCIF found in r8a7790 SoCs
@@ -23,7 +24,8 @@ Required properties:
- interrupts: Some SoCs have only 1 shared interrupt, while others have either
2 or 3 individual interrupts (error, int, card detect). Below is the number
of interrupts for each SoC:
- 1: r8a73a4, r8a7743, r8a7745, r8a7778, r8a7790, r8a7791, r8a7793, r8a7794
+ 1: r8a73a4, r8a7743, r8a7744, r8a7745, r8a7778, r8a7790, r8a7791, r8a7793,
+ r8a7794
2: r8a7740, sh73a0
3: r7s72100
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt b/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt
new file mode 100644
index 000000000000..45c9978aad7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt
@@ -0,0 +1,41 @@
+* Spreadtrum SDHCI controller (sdhci-sprd)
+
+The Secure Digital (SD) Host controller on Spreadtrum SoCs provides an interface
+for MMC, SD and SDIO types of cards.
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-sprd driver.
+
+Required properties:
+- compatible: Should contain "sprd,sdhci-r11".
+- reg: physical base address of the controller and length.
+- interrupts: Interrupts used by the SDHCI controller.
+- clocks: Should contain phandle for the clock feeding the SDHCI controller
+- clock-names: Should contain the following:
+ "sdio" - SDIO source clock (required)
+ "enable" - gate clock which used for enabling/disabling the device (required)
+
+Optional properties:
+- assigned-clocks: the same with "sdio" clock
+- assigned-clock-parents: the default parent of "sdio" clock
+
+Examples:
+
+sdio0: sdio@20600000 {
+ compatible = "sprd,sdhci-r11";
+ reg = <0 0x20600000 0 0x1000>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+
+ clock-names = "sdio", "enable";
+ clocks = <&ap_clk CLK_EMMC_2X>,
+ <&apahb_gate CLK_EMMC_EB>;
+ assigned-clocks = <&ap_clk CLK_EMMC_2X>;
+ assigned-clock-parents = <&rpll CLK_RPLL_390M>;
+
+ bus-width = <8>;
+ non-removable;
+ no-sdio;
+ no-sd;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
index c434200d19d5..27f2eab2981d 100644
--- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
@@ -16,7 +16,11 @@ Required properties:
"renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC
"renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC
"renesas,sdhi-r8a7743" - SDHI IP on R8A7743 SoC
+ "renesas,sdhi-r8a7744" - SDHI IP on R8A7744 SoC
"renesas,sdhi-r8a7745" - SDHI IP on R8A7745 SoC
+ "renesas,sdhi-r8a774a1" - SDHI IP on R8A774A1 SoC
+ "renesas,sdhi-r8a77470" - SDHI IP on R8A77470 SoC
+ "renesas,sdhi-mmc-r8a77470" - SDHI/MMC IP on R8A77470 SoC
"renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC
"renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC
"renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC
@@ -27,14 +31,16 @@ Required properties:
"renesas,sdhi-r8a7795" - SDHI IP on R8A7795 SoC
"renesas,sdhi-r8a7796" - SDHI IP on R8A7796 SoC
"renesas,sdhi-r8a77965" - SDHI IP on R8A77965 SoC
+ "renesas,sdhi-r8a77970" - SDHI IP on R8A77970 SoC
"renesas,sdhi-r8a77980" - SDHI IP on R8A77980 SoC
"renesas,sdhi-r8a77990" - SDHI IP on R8A77990 SoC
"renesas,sdhi-r8a77995" - SDHI IP on R8A77995 SoC
"renesas,sdhi-shmobile" - a generic sh-mobile SDHI controller
"renesas,rcar-gen1-sdhi" - a generic R-Car Gen1 SDHI controller
- "renesas,rcar-gen2-sdhi" - a generic R-Car Gen2 or RZ/G1
+ "renesas,rcar-gen2-sdhi" - a generic R-Car Gen2 and RZ/G1 SDHI
+ (not SDHI/MMC) controller
+ "renesas,rcar-gen3-sdhi" - a generic R-Car Gen3 or RZ/G2
SDHI controller
- "renesas,rcar-gen3-sdhi" - a generic R-Car Gen3 SDHI controller
When compatible with the generic version, nodes must list
diff --git a/Documentation/devicetree/bindings/mmc/uniphier-sd.txt b/Documentation/devicetree/bindings/mmc/uniphier-sd.txt
new file mode 100644
index 000000000000..e1d658755722
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/uniphier-sd.txt
@@ -0,0 +1,55 @@
+UniPhier SD/eMMC controller
+
+Required properties:
+- compatible: should be one of the following:
+ "socionext,uniphier-sd-v2.91" - IP version 2.91
+ "socionext,uniphier-sd-v3.1" - IP version 3.1
+ "socionext,uniphier-sd-v3.1.1" - IP version 3.1.1
+- reg: offset and length of the register set for the device.
+- interrupts: a single interrupt specifier.
+- clocks: a single clock specifier of the controller clock.
+- reset-names: should contain the following:
+ "host" - mandatory for all versions
+ "bridge" - should exist only for "socionext,uniphier-sd-v2.91"
+ "hw" - should exist if eMMC hw reset line is available
+- resets: a list of reset specifiers, corresponding to the reset-names
+
+Optional properties:
+- pinctrl-names: if present, should contain the following:
+ "default" - should exist for all instances
+ "uhs" - should exist for SD instance with UHS support
+- pinctrl-0: pin control state for the default mode
+- pinctrl-1: pin control state for the UHS mode
+- dma-names: should be "rx-tx" if present.
+ This property can exist only for "socionext,uniphier-sd-v2.91".
+- dmas: a single DMA channel specifier
+ This property can exist only for "socionext,uniphier-sd-v2.91".
+- bus-width: see mmc.txt
+- cap-sd-highspeed: see mmc.txt
+- cap-mmc-highspeed: see mmc.txt
+- sd-uhs-sdr12: see mmc.txt
+- sd-uhs-sdr25: see mmc.txt
+- sd-uhs-sdr50: see mmc.txt
+- cap-mmc-hw-reset: should exist if reset-names contains "hw". see mmc.txt
+- non-removable: see mmc.txt
+
+Example:
+
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ reg = <0x5a400000 0x200>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&mio_clk 0>;
+ reset-names = "host", "bridge";
+ resets = <&mio_rst 0>, <&mio_rst 3>;
+ dma-names = "rx-tx";
+ dmas = <&dmac 4>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
index 4648948f7c3b..e15589f47787 100644
--- a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
+++ b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
@@ -19,6 +19,9 @@ Optional properties:
- interrupt-names: must be "mdio_done_error" when there is a share interrupt fed
to this hardware block, or must be "mdio_done" for the first interrupt and
"mdio_error" for the second when there are separate interrupts
+- clocks: A reference to the clock supplying the MDIO bus controller
+- clock-frequency: the MDIO bus clock that must be output by the MDIO bus
+ hardware, if absent, the default hardware values are used
Child nodes of this MDIO bus controller node are standard Ethernet PHY device
nodes as described in Documentation/devicetree/bindings/net/phy.txt
diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
index 94a7f33ac5e9..cc4372842bf3 100644
--- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
+++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
@@ -3,6 +3,7 @@ Renesas R-Car CAN controller Device Tree Bindings
Required properties:
- compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
+ "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC.
"renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
"renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
"renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt
index 1811e1972a7a..5201bc15fdd6 100644
--- a/Documentation/devicetree/bindings/net/dsa/b53.txt
+++ b/Documentation/devicetree/bindings/net/dsa/b53.txt
@@ -46,6 +46,42 @@ Required properties:
"brcm,bcm6328-switch"
"brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch"
+Required properties for BCM585xx/586xx/88312 SoCs:
+
+ - reg: a total of 3 register base addresses, the first one must be the
+ Switch Register Access block base, the second is the port 5/4 mux
+ configuration register and the third one is the SGMII configuration
+ and status register base address.
+
+ - interrupts: a total of 13 interrupts must be specified, in the following
+ order: port 0-5, 7-8 link status change, then the integrated PHY interrupt,
+ then the timestamping interrupt and the sleep timer interrupts for ports
+ 5,7,8.
+
+Optional properties for BCM585xx/586xx/88312 SoCs:
+
+ - reg-names: a total of 3 names matching the 3 base register address, must
+ be in the following order:
+ "srab"
+ "mux_config"
+ "sgmii_config"
+
+ - interrupt-names: a total of 13 names matching the 13 interrupts specified
+ must be in the following order:
+ "link_state_p0"
+ "link_state_p1"
+ "link_state_p2"
+ "link_state_p3"
+ "link_state_p4"
+ "link_state_p5"
+ "link_state_p7"
+ "link_state_p8"
+ "phy"
+ "ts"
+ "imp_sleep_timer_p5"
+ "imp_sleep_timer_p7"
+ "imp_sleep_timer_p8"
+
See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
required and optional properties.
diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
new file mode 100644
index 000000000000..886cbe8ffb38
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
@@ -0,0 +1,143 @@
+Lantiq GSWIP Ethernet switches
+==================================
+
+Required properties for GSWIP core:
+
+- compatible : "lantiq,xrx200-gswip" for the embedded GSWIP in the
+ xRX200 SoC
+- reg : memory range of the GSWIP core registers
+ : memory range of the GSWIP MDIO registers
+ : memory range of the GSWIP MII registers
+
+See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of
+additional required and optional properties.
+
+
+Required properties for MDIO bus:
+- compatible : "lantiq,xrx200-mdio" for the MDIO bus inside the GSWIP
+ core of the xRX200 SoC and the PHYs connected to it.
+
+See Documentation/devicetree/bindings/net/mdio.txt for a list of additional
+required and optional properties.
+
+
+Required properties for GPHY firmware loading:
+- compatible : "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw"
+ "lantiq,xrx300-gphy-fw", "lantiq,gphy-fw"
+ "lantiq,xrx330-gphy-fw", "lantiq,gphy-fw"
+ for the loading of the firmware into the embedded
+ GPHY core of the SoC.
+- lantiq,rcu : reference to the rcu syscon
+
+The GPHY firmware loader has a list of GPHY entries, one for each
+embedded GPHY
+
+- reg : Offset of the GPHY firmware register in the RCU
+ register range
+- resets : list of resets of the embedded GPHY
+- reset-names : list of names of the resets
+
+Example:
+
+Ethernet switch on the VRX200 SoC:
+
+switch@e108000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-gswip";
+ reg = < 0xe108000 0x3100 /* switch */
+ 0xe10b100 0xd8 /* mdio */
+ 0xe10b1d8 0x130 /* mii */
+ >;
+ dsa,member = <0 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan3";
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan4";
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan1";
+ phy-mode = "internal";
+ phy-handle = <&phy13>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "wan";
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+
+ port@6 {
+ reg = <0x6>;
+ label = "cpu";
+ ethernet = <&eth0>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+ reg = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+ };
+
+ gphy-fw {
+ compatible = "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw";
+ lantiq,rcu = <&rcu0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gphy@20 {
+ reg = <0x20>;
+
+ resets = <&reset0 31 30>;
+ reset-names = "gphy";
+ };
+
+ gphy@68 {
+ reg = <0x68>;
+
+ resets = <&reset0 29 28>;
+ reset-names = "gphy";
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt
new file mode 100644
index 000000000000..5ff5e68bbbb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt
@@ -0,0 +1,21 @@
+Lantiq xRX200 GSWIP PMAC Ethernet driver
+==================================
+
+Required properties:
+
+- compatible : "lantiq,xrx200-net" for the PMAC of the embedded
+ : GSWIP in the xXR200
+- reg : memory range of the PMAC core inside of the GSWIP core
+- interrupts : TX and RX DMA interrupts. Use interrupt-names "tx" for
+ : the TX interrupt and "rx" for the RX interrupt.
+
+Example:
+
+ethernet@e10b308 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-net";
+ reg = <0xe10b308 0xcf8>;
+ interrupts = <73>, <72>;
+ interrupt-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.txt b/Documentation/devicetree/bindings/net/marvell,prestera.txt
index c329608fa887..83370ebf5b89 100644
--- a/Documentation/devicetree/bindings/net/marvell,prestera.txt
+++ b/Documentation/devicetree/bindings/net/marvell,prestera.txt
@@ -2,7 +2,7 @@ Marvell Prestera Switch Chip bindings
-------------------------------------
Required properties:
-- compatible: one of the following
+- compatible: must be "marvell,prestera" and one of the following
"marvell,prestera-98dx3236",
"marvell,prestera-98dx3336",
"marvell,prestera-98dx4251",
@@ -21,7 +21,7 @@ switch {
ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
packet-processor@0 {
- compatible = "marvell,prestera-98dx3236";
+ compatible = "marvell,prestera-98dx3236", "marvell,prestera";
reg = <0 0x4000000>;
interrupts = <33>, <34>, <35>;
dfx = <&dfx>;
diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt
index fc019df0d863..b78397669320 100644
--- a/Documentation/devicetree/bindings/net/marvell-pp2.txt
+++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt
@@ -31,7 +31,7 @@ required.
Required properties (port):
-- interrupts: interrupt for the port
+- interrupts: interrupt(s) for the port
- port-id: ID of the port from the MAC point of view
- gop-port-id: only for marvell,armada-7k-pp2, ID of the port from the
GOP (Group Of Ports) point of view. This ID is used to index the
@@ -43,10 +43,12 @@ Optional properties (port):
- marvell,loopback: port is loopback mode
- phy: a phandle to a phy node defining the PHY address (as the reg
property, a single integer).
-- interrupt-names: if more than a single interrupt for rx is given, must
- be the name associated to the interrupts listed. Valid
- names are: "tx-cpu0", "tx-cpu1", "tx-cpu2", "tx-cpu3",
- "rx-shared", "link".
+- interrupt-names: if more than a single interrupt for is given, must be the
+ name associated to the interrupts listed. Valid names are:
+ "hifX", with X in [0..8], and "link". The names "tx-cpu0",
+ "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported
+ for backward compatibility but shouldn't be used for new
+ additions.
- marvell,system-controller: a phandle to the system controller.
Example for marvell,armada-375-pp2:
@@ -89,9 +91,14 @@ cpm_ethernet: ethernet@0 {
<ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared";
+ <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+ "hif5", "hif6", "hif7", "hif8", "link";
port-id = <0>;
gop-port-id = <0>;
};
@@ -101,9 +108,14 @@ cpm_ethernet: ethernet@0 {
<ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared";
+ <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+ "hif5", "hif6", "hif7", "hif8", "link";
port-id = <1>;
gop-port-id = <2>;
};
@@ -113,9 +125,14 @@ cpm_ethernet: ethernet@0 {
<ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared";
+ <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+ "hif5", "hif6", "hif7", "hif8", "link";
port-id = <2>;
gop-port-id = <3>;
};
diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
index e22d8cfea687..5100358177c9 100644
--- a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
+++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
@@ -1,4 +1,4 @@
-Micrel KSZ9021/KSZ9031 Gigabit Ethernet PHY
+Micrel KSZ9021/KSZ9031/KSZ9131 Gigabit Ethernet PHY
Some boards require special tuning values, particularly when it comes
to clock delays. You can specify clock delay values in the PHY OF
@@ -64,6 +64,32 @@ KSZ9031:
Attention: The link partner must be configurable as slave otherwise
no link will be established.
+KSZ9131:
+
+ All skew control options are specified in picoseconds. The increment
+ step is 100ps. Unlike KSZ9031, the values represent picoseccond delays.
+ A negative value can be assigned as rxc-skew-psec = <(-100)>;.
+
+ Optional properties:
+
+ Range of the value -700 to 2400, default value 0:
+
+ - rxc-skew-psec : Skew control of RX clock pad
+ - txc-skew-psec : Skew control of TX clock pad
+
+ Range of the value -700 to 800, default value 0:
+
+ - rxdv-skew-psec : Skew control of RX CTL pad
+ - txen-skew-psec : Skew control of TX CTL pad
+ - rxd0-skew-psec : Skew control of RX data 0 pad
+ - rxd1-skew-psec : Skew control of RX data 1 pad
+ - rxd2-skew-psec : Skew control of RX data 2 pad
+ - rxd3-skew-psec : Skew control of RX data 3 pad
+ - txd0-skew-psec : Skew control of TX data 0 pad
+ - txd1-skew-psec : Skew control of TX data 1 pad
+ - txd2-skew-psec : Skew control of TX data 2 pad
+ - txd3-skew-psec : Skew control of TX data 3 pad
+
Examples:
mdio {
diff --git a/Documentation/devicetree/bindings/net/mscc-ocelot.txt b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
index 0a84711abece..9e5c17d426ce 100644
--- a/Documentation/devicetree/bindings/net/mscc-ocelot.txt
+++ b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
@@ -12,7 +12,6 @@ Required properties:
- "sys"
- "rew"
- "qs"
- - "hsio"
- "qsys"
- "ana"
- "portX" with X from 0 to the number of last port index available on that
@@ -45,7 +44,6 @@ Example:
reg = <0x1010000 0x10000>,
<0x1030000 0x10000>,
<0x1080000 0x100>,
- <0x10d0000 0x10000>,
<0x11e0000 0x100>,
<0x11f0000 0x100>,
<0x1200000 0x100>,
@@ -59,10 +57,9 @@ Example:
<0x1280000 0x100>,
<0x1800000 0x80000>,
<0x1880000 0x10000>;
- reg-names = "sys", "rew", "qs", "hsio", "port0",
- "port1", "port2", "port3", "port4", "port5",
- "port6", "port7", "port8", "port9", "port10",
- "qsys", "ana";
+ reg-names = "sys", "rew", "qs", "port0", "port1", "port2",
+ "port3", "port4", "port5", "port6", "port7",
+ "port8", "port9", "port10", "qsys", "ana";
interrupts = <21 22>;
interrupt-names = "xtr", "inj";
diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
index 0eedabe22cc3..5ff37c68c941 100644
--- a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
+++ b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
@@ -1,10 +1,5 @@
* Microsemi - vsc8531 Giga bit ethernet phy
-Required properties:
-- compatible : Should contain phy id as "ethernet-phy-idAAAA.BBBB"
- The PHY device uses the binding described in
- Documentation/devicetree/bindings/net/phy.txt
-
Optional properties:
- vsc8531,vddmac : The vddmac in mV. Allowed values is listed
in the first row of Table 1 (below).
@@ -27,14 +22,16 @@ Optional properties:
'vddmac'.
Default value is 0%.
Ref: Table:1 - Edge rate change (below).
-- vsc8531,led-0-mode : LED mode. Specify how the LED[0] should behave.
- Allowed values are define in
- "include/dt-bindings/net/mscc-phy-vsc8531.h".
- Default value is VSC8531_LINK_1000_ACTIVITY (1).
-- vsc8531,led-1-mode : LED mode. Specify how the LED[1] should behave.
- Allowed values are define in
+- vsc8531,led-[N]-mode : LED mode. Specify how the LED[N] should behave.
+ N depends on the number of LEDs supported by a
+ PHY.
+ Allowed values are defined in
"include/dt-bindings/net/mscc-phy-vsc8531.h".
- Default value is VSC8531_LINK_100_ACTIVITY (2).
+ Default values are VSC8531_LINK_1000_ACTIVITY (1),
+ VSC8531_LINK_100_ACTIVITY (2),
+ VSC8531_LINK_ACTIVITY (0) and
+ VSC8531_DUPLEX_COLLISION (8).
+
Table: 1 - Edge rate change
----------------------------------------------------------------|
diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt
index da249b7c406c..3530256a879c 100644
--- a/Documentation/devicetree/bindings/net/renesas,ravb.txt
+++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt
@@ -6,6 +6,7 @@ interface contains.
Required properties:
- compatible: Must contain one or more of the following:
- "renesas,etheravb-r8a7743" for the R8A7743 SoC.
+ - "renesas,etheravb-r8a7744" for the R8A7744 SoC.
- "renesas,etheravb-r8a7745" for the R8A7745 SoC.
- "renesas,etheravb-r8a77470" for the R8A77470 SoC.
- "renesas,etheravb-r8a7790" for the R8A7790 SoC.
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 7fd4e8ce4149..2196d1ab3c8c 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -56,6 +56,11 @@ Optional properties:
the length can vary between hw versions.
- <supply-name>-supply: handle to the regulator device tree node
optional "supply-name" is "vdd-0.8-cx-mx".
+- memory-region:
+ Usage: optional
+ Value type: <phandle>
+ Definition: reference to the reserved-memory for the msa region
+ used by the wifi firmware running in Q6.
Example (to supply the calibration data alone):
@@ -149,4 +154,5 @@ wifi@18000000 {
<0 140 0 /* CE10 */ >,
<0 141 0 /* CE11 */ >;
vdd-0.8-cx-mx-supply = <&pm8998_l5>;
+ memory-region = <&wifi_msa_mem>;
};
diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
index e319fe5e205a..99c4ba6a3f61 100644
--- a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
+++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
@@ -7,6 +7,7 @@ Required properties:
"allwinner,sun8i-a83t-sid"
"allwinner,sun8i-h3-sid"
"allwinner,sun50i-a64-sid"
+ "allwinner,sun50i-h5-sid"
- reg: Should contain registers location and length
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index cb33421184a0..f37494d5a7be 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -50,6 +50,7 @@ Additional required properties for imx7d-pcie:
- reset-names: Must contain the following entires:
- "pciephy"
- "apps"
+ - "turnoff"
Example:
diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt
index 4dd17de549a7..2030ee0dc4f9 100644
--- a/Documentation/devicetree/bindings/pci/pci-keystone.txt
+++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt
@@ -19,6 +19,9 @@ pcie_msi_intc : Interrupt controller device node for MSI IRQ chip
interrupt-cells: should be set to 1
interrupts: GIC interrupt lines connected to PCI MSI interrupt lines
+ti,syscon-pcie-id : phandle to the device control module required to set device
+ id and vendor id.
+
Example:
pcie_msi_intc: msi-interrupt-controller {
interrupt-controller;
diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
index 9fe7e12a7bf3..b94078f58d8e 100644
--- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
+++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
@@ -7,6 +7,7 @@ OHCI and EHCI controllers.
Required properties:
- compatible: "renesas,pci-r8a7743" for the R8A7743 SoC;
+ "renesas,pci-r8a7744" for the R8A7744 SoC;
"renesas,pci-r8a7745" for the R8A7745 SoC;
"renesas,pci-r8a7790" for the R8A7790 SoC;
"renesas,pci-r8a7791" for the R8A7791 SoC;
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
index a5f7fc62d10e..976ef7bfff93 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -2,6 +2,7 @@
Required properties:
compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
+ "renesas,pcie-r8a7744" for the R8A7744 SoC;
"renesas,pcie-r8a7779" for the R8A7779 SoC;
"renesas,pcie-r8a7790" for the R8A7790 SoC;
"renesas,pcie-r8a7791" for the R8A7791 SoC;
@@ -9,6 +10,7 @@ compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
"renesas,pcie-r8a7795" for the R8A7795 SoC;
"renesas,pcie-r8a7796" for the R8A7796 SoC;
"renesas,pcie-r8a77980" for the R8A77980 SoC;
+ "renesas,pcie-r8a77990" for the R8A77990 SoC;
"renesas,pcie-rcar-gen2" for a generic R-Car Gen2 or
RZ/G1 compatible device.
"renesas,pcie-rcar-gen3" for a generic R-Car Gen3 compatible device.
diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
index 7f7af3044016..452fe48c4fdd 100644
--- a/Documentation/devicetree/bindings/pci/ti-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -26,6 +26,11 @@ HOST MODE
ranges,
interrupt-map-mask,
interrupt-map : as specified in ../designware-pcie.txt
+ - ti,syscon-unaligned-access: phandle to the syscon DT node. The 1st argument
+ should contain the register offset within syscon
+ and the 2nd argument should contain the bit field
+ for setting the bit to enable unaligned
+ access.
DEVICE MODE
===========
diff --git a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
index 0aced97d8092..b640845fec67 100644
--- a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
+++ b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
@@ -8,6 +8,7 @@ Required properties:
"brcm,iproc-nsp-sata-phy"
"brcm,phy-sata3"
"brcm,iproc-sr-sata-phy"
+ "brcm,bcm63138-sata-phy"
- address-cells: should be 1
- size-cells: should be 0
- reg: register ranges for the PHY PCB interface
diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt b/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
new file mode 100644
index 000000000000..7f49fd54ebc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
@@ -0,0 +1,30 @@
+Cadence MHDP DisplayPort SD0801 PHY binding
+===========================================
+
+This binding describes the Cadence SD0801 PHY hardware included with
+the Cadence MHDP DisplayPort controller.
+
+-------------------------------------------------------------------------------
+Required properties (controller (parent) node):
+- compatible : Should be "cdns,dp-phy"
+- reg : Defines the following sets of registers in the parent
+ mhdp device:
+ - Offset of the DPTX PHY configuration registers
+ - Offset of the SD0801 PHY configuration registers
+- #phy-cells : from the generic PHY bindings, must be 0.
+
+Optional properties:
+- num_lanes : Number of DisplayPort lanes to use (1, 2 or 4)
+- max_bit_rate : Maximum DisplayPort link bit rate to use, in Mbps (2160,
+ 2430, 2700, 3240, 4320, 5400 or 8100)
+-------------------------------------------------------------------------------
+
+Example:
+ dp_phy: phy@f0fb030a00 {
+ compatible = "cdns,dp-phy";
+ reg = <0xf0 0xfb030a00 0x0 0x00000040>,
+ <0xf0 0xfb500000 0x0 0x00100000>;
+ num_lanes = <4>;
+ max_bit_rate = <8100>;
+ #phy-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt b/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt
new file mode 100644
index 000000000000..332219860187
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt
@@ -0,0 +1,43 @@
+Microsemi Ocelot SerDes muxing driver
+-------------------------------------
+
+On Microsemi Ocelot, there is a handful of registers in HSIO address
+space for setting up the SerDes to switch port muxing.
+
+A SerDes X can be "muxed" to work with switch port Y or Z for example.
+One specific SerDes can also be used as a PCIe interface.
+
+Hence, a SerDes represents an interface, be it an Ethernet or a PCIe one.
+
+There are two kinds of SerDes: SERDES1G supports 10/100Mbps in
+half/full-duplex and 1000Mbps in full-duplex mode while SERDES6G supports
+10/100Mbps in half/full-duplex and 1000/2500Mbps in full-duplex mode.
+
+Also, SERDES6G number (aka "macro") 0 is the only interface supporting
+QSGMII.
+
+This is a child of the HSIO syscon ("mscc,ocelot-hsio", see
+Documentation/devicetree/bindings/mips/mscc.txt) on the Microsemi Ocelot.
+
+Required properties:
+
+- compatible: should be "mscc,vsc7514-serdes"
+- #phy-cells : from the generic phy bindings, must be 2.
+ The first number defines the input port to use for a given
+ SerDes macro. The second defines the macro to use. They are
+ defined in dt-bindings/phy/phy-ocelot-serdes.h
+
+Example:
+
+ serdes: serdes {
+ compatible = "mscc,vsc7514-serdes";
+ #phy-cells = <2>;
+ };
+
+ ethernet {
+ port1 {
+ phy-handle = <&phy_foo>;
+ /* Link SERDES1G_5 to port1 */
+ phys = <&serdes 1 SERDES1G_5>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt
new file mode 100644
index 000000000000..710cccd5ee56
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt
@@ -0,0 +1,43 @@
+ROCKCHIP HDMI PHY WITH INNO IP BLOCK
+
+Required properties:
+ - compatible : should be one of the listed compatibles:
+ * "rockchip,rk3228-hdmi-phy",
+ * "rockchip,rk3328-hdmi-phy";
+ - reg : Address and length of the hdmi phy control register set
+ - clocks : phandle + clock specifier for the phy clocks
+ - clock-names : string, clock name, must contain "sysclk" for system
+ control and register configuration, "refoclk" for crystal-
+ oscillator reference PLL clock input and "refpclk" for pclk-
+ based refeference PLL clock input.
+ - #clock-cells: should be 0.
+ - clock-output-names : shall be the name for the output clock.
+ - interrupts : phandle + interrupt specified for the hdmiphy interrupt
+ - #phy-cells : must be 0. See ./phy-bindings.txt for details.
+
+Optional properties for rk3328-hdmi-phy:
+ - nvmem-cells = phandle + nvmem specifier for the cpu-version efuse
+ - nvmem-cell-names : "cpu-version" to read the chip version, required
+ for adjustment to some frequency settings
+
+Example:
+ hdmi_phy: hdmi-phy@12030000 {
+ compatible = "rockchip,rk3228-hdmi-phy";
+ reg = <0x12030000 0x10000>;
+ #phy-cells = <0>;
+ clocks = <&cru PCLK_HDMI_PHY>, <&xin24m>, <&cru DCLK_HDMIPHY>;
+ clock-names = "sysclk", "refoclk", "refpclk";
+ #clock-cells = <0>;
+ clock-output-names = "hdmi_phy";
+ status = "disabled";
+ };
+
+Then the PHY can be used in other nodes such as:
+
+ hdmi: hdmi@200a0000 {
+ compatible = "rockchip,rk3228-dw-hdmi";
+ ...
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi";
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index 0c7629e88bf3..adf20b2bdf71 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -10,16 +10,20 @@ Required properties:
"qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
"qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
"qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
- "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845.
+ "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
+ "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845.
- - reg:
- - For "qcom,sdm845-qmp-usb3-phy":
- - index 0: address and length of register set for PHY's common serdes
- block.
- - named register "dp_com" (using reg-names): address and length of the
- DP_COM control block.
- - For all others:
- - offset and length of register set for PHY's common serdes block.
+- reg:
+ - index 0: address and length of register set for PHY's common
+ serdes block.
+ - index 1: address and length of the DP_COM control block (for
+ "qcom,sdm845-qmp-usb3-phy" only).
+
+- reg-names:
+ - For "qcom,sdm845-qmp-usb3-phy":
+ - Should be: "reg-base", "dp_com"
+ - For all others:
+ - The reg-names property shouldn't be defined.
- #clock-cells: must be 1
- Phy pll outputs a bunch of clocks for Tx, Rx and Pipe
@@ -35,6 +39,7 @@ Required properties:
"aux" for phy aux clock,
"ref" for 19.2 MHz ref clk,
"com_aux" for phy common block aux clock,
+ "ref_aux" for phy reference aux clock,
For "qcom,msm8996-qmp-pcie-phy" must contain:
"aux", "cfg_ahb", "ref".
For "qcom,msm8996-qmp-usb3-phy" must contain:
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
index eeb9e1874ea6..4f0879a0ca12 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
@@ -5,6 +5,7 @@ This file provides information on what the device node for the R-Car generation
Required properties:
- compatible: "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC.
+ "renesas,usb-phy-r8a7744" if the device is a part of R8A7744 SoC.
"renesas,usb-phy-r8a7745" if the device is a part of R8A7745 SoC.
"renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC.
"renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC.
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
index fb4a204da2bf..de7b5393c163 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
@@ -1,10 +1,12 @@
* Renesas R-Car generation 3 USB 2.0 PHY
This file provides information on what the device node for the R-Car generation
-3 USB 2.0 PHY contains.
+3 and RZ/G2 USB 2.0 PHY contain.
Required properties:
-- compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
+- compatible: "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1
+ SoC.
+ "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
SoC.
"renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796
SoC.
@@ -14,7 +16,8 @@ Required properties:
R8A77990 SoC.
"renesas,usb2-phy-r8a77995" if the device is a part of an
R8A77995 SoC.
- "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device.
+ "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 or RZ/G2
+ compatible device.
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first
@@ -31,6 +34,8 @@ channel as USB OTG:
- interrupts: interrupt specifier for the PHY.
- vbus-supply: Phandle to a regulator that provides power to the VBUS. This
regulator will be managed during the PHY power on/off sequence.
+- renesas,no-otg-pins: boolean, specify when a board does not provide proper
+ otg pins.
Example (R-Car H3):
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
index 47dd296ecead..9d9826609c2f 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
@@ -1,20 +1,22 @@
* Renesas R-Car generation 3 USB 3.0 PHY
This file provides information on what the device node for the R-Car generation
-3 USB 3.0 PHY contains.
+3 and RZ/G2 USB 3.0 PHY contain.
If you want to enable spread spectrum clock (ssc), you should use USB_EXTAL
instead of USB3_CLK. However, if you don't want to these features, you don't
need this driver.
Required properties:
-- compatible: "renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795
+- compatible: "renesas,r8a774a1-usb3-phy" if the device is a part of an R8A774A1
+ SoC.
+ "renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795
SoC.
"renesas,r8a7796-usb3-phy" if the device is a part of an R8A7796
SoC.
"renesas,r8a77965-usb3-phy" if the device is a part of an
R8A77965 SoC.
- "renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 compatible
- device.
+ "renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 or RZ/G2
+ compatible device.
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first
diff --git a/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt b/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt
new file mode 100644
index 000000000000..1889d3b89d68
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt
@@ -0,0 +1,31 @@
+Socionext UniPhier PCIe PHY bindings
+
+This describes the devicetree bindings for PHY interface built into
+PCIe controller implemented on Socionext UniPhier SoCs.
+
+Required properties:
+- compatible: Should contain one of the following:
+ "socionext,uniphier-ld20-pcie-phy" - for LD20 PHY
+ "socionext,uniphier-pxs3-pcie-phy" - for PXs3 PHY
+- reg: Specifies offset and length of the register set for the device.
+- #phy-cells: Must be zero.
+- clocks: A phandle to the clock gate for PCIe glue layer including
+ this phy.
+- resets: A phandle to the reset line for PCIe glue layer including
+ this phy.
+
+Optional properties:
+- socionext,syscon: A phandle to system control to set configurations
+ for phy.
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties.
+
+Example:
+ pcie_phy: phy@66038000 {
+ compatible = "socionext,uniphier-ld20-pcie-phy";
+ reg = <0x66038000 0x4000>;
+ #phy-cells = <0>;
+ clocks = <&sys_clk 24>;
+ resets = <&sys_rst 24>;
+ socionext,syscon = <&soc_glue>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt
new file mode 100644
index 000000000000..b43b28250cc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt
@@ -0,0 +1,45 @@
+Socionext UniPhier USB2 PHY
+
+This describes the devicetree bindings for PHY interface built into
+USB2 controller implemented on Socionext UniPhier SoCs.
+
+Pro4 SoC has both USB2 and USB3 host controllers, however, this USB3
+controller doesn't include its own High-Speed PHY. This needs to specify
+USB2 PHY instead of USB3 HS-PHY.
+
+Required properties:
+- compatible: Should contain one of the following:
+ "socionext,uniphier-pro4-usb2-phy" - for Pro4 SoC
+ "socionext,uniphier-ld11-usb2-phy" - for LD11 SoC
+
+Sub-nodes:
+Each PHY should be represented as a sub-node.
+
+Sub-nodes required properties:
+- #phy-cells: Should be 0.
+- reg: The number of the PHY.
+
+Sub-nodes optional properties:
+- vbus-supply: A phandle to the regulator for USB VBUS.
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties.
+
+Example:
+ soc-glue@5f800000 {
+ ...
+ usb-phy {
+ compatible = "socionext,uniphier-ld11-usb2-phy";
+ usb_phy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ ...
+ };
+ };
+
+ usb@5a800100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ ...
+ phy-names = "usb";
+ phys = <&usb_phy0>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt
new file mode 100644
index 000000000000..e8d8086a7ae9
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt
@@ -0,0 +1,69 @@
+Socionext UniPhier USB3 High-Speed (HS) PHY
+
+This describes the devicetree bindings for PHY interfaces built into
+USB3 controller implemented on Socionext UniPhier SoCs.
+Although the controller includes High-Speed PHY and Super-Speed PHY,
+this describes about High-Speed PHY.
+
+Required properties:
+- compatible: Should contain one of the following:
+ "socionext,uniphier-pro4-usb3-hsphy" - for Pro4 SoC
+ "socionext,uniphier-pxs2-usb3-hsphy" - for PXs2 SoC
+ "socionext,uniphier-ld20-usb3-hsphy" - for LD20 SoC
+ "socionext,uniphier-pxs3-usb3-hsphy" - for PXs3 SoC
+- reg: Specifies offset and length of the register set for the device.
+- #phy-cells: Should be 0.
+- clocks: A list of phandles to the clock gate for USB3 glue layer.
+ According to the clock-names, appropriate clocks are required.
+- clock-names: Should contain the following:
+ "gio", "link" - for Pro4 SoC
+ "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional.
+ "phy", "link" - for others
+- resets: A list of phandles to the reset control for USB3 glue layer.
+ According to the reset-names, appropriate resets are required.
+- reset-names: Should contain the following:
+ "gio", "link" - for Pro4 SoC
+ "phy", "link" - for others
+
+Optional properties:
+- vbus-supply: A phandle to the regulator for USB VBUS.
+- nvmem-cells: Phandles to nvmem cell that contains the trimming data.
+ Available only for HS-PHY implemented on LD20 and PXs3, and
+ if unspecified, default value is used.
+- nvmem-cell-names: Should be the following names, which correspond to
+ each nvmem-cells.
+ All of the 3 parameters associated with the following names are
+ required for each port, if any one is omitted, the trimming data
+ of the port will not be set at all.
+ "rterm", "sel_t", "hs_i" - Each cell name for phy parameters
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties.
+
+Example:
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-ld20-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb_vbus0: regulator {
+ ...
+ };
+
+ usb_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-ld20-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ vbus-supply = <&usb_vbus0>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
+ <&usb_hs_i0>;
+ };
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt
new file mode 100644
index 000000000000..490b815445e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt
@@ -0,0 +1,57 @@
+Socionext UniPhier USB3 Super-Speed (SS) PHY
+
+This describes the devicetree bindings for PHY interfaces built into
+USB3 controller implemented on Socionext UniPhier SoCs.
+Although the controller includes High-Speed PHY and Super-Speed PHY,
+this describes about Super-Speed PHY.
+
+Required properties:
+- compatible: Should contain one of the following:
+ "socionext,uniphier-pro4-usb3-ssphy" - for Pro4 SoC
+ "socionext,uniphier-pxs2-usb3-ssphy" - for PXs2 SoC
+ "socionext,uniphier-ld20-usb3-ssphy" - for LD20 SoC
+ "socionext,uniphier-pxs3-usb3-ssphy" - for PXs3 SoC
+- reg: Specifies offset and length of the register set for the device.
+- #phy-cells: Should be 0.
+- clocks: A list of phandles to the clock gate for USB3 glue layer.
+ According to the clock-names, appropriate clocks are required.
+- clock-names:
+ "gio", "link" - for Pro4 SoC
+ "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional.
+ "phy", "link" - for others
+- resets: A list of phandles to the reset control for USB3 glue layer.
+ According to the reset-names, appropriate resets are required.
+- reset-names:
+ "gio", "link" - for Pro4 SoC
+ "phy", "link" - for others
+
+Optional properties:
+- vbus-supply: A phandle to the regulator for USB VBUS.
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties.
+
+Example:
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-ld20-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb_vbus0: regulator {
+ ...
+ };
+
+ usb_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-ld20-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ vbus-supply = <&usb_vbus0>;
+ };
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt
new file mode 100644
index 000000000000..4fa9539070cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt
@@ -0,0 +1,57 @@
+Broadcom Northstar pins mux controller
+
+Some of Northstar SoCs's pins can be used for various purposes thanks to the mux
+controller. This binding allows describing mux controller and listing available
+functions. They can be referenced later by other bindings to let system
+configure controller correctly.
+
+A list of pins varies across chipsets so few bindings are available.
+
+Required properties:
+- compatible: must be one of:
+ "brcm,bcm4708-pinmux"
+ "brcm,bcm4709-pinmux"
+ "brcm,bcm53012-pinmux"
+- reg: iomem address range of CRU (Central Resource Unit) pin registers
+- reg-names: "cru_gpio_control" - the only needed & supported reg right now
+
+Functions and their groups available for all chipsets:
+- "spi": "spi_grp"
+- "i2c": "i2c_grp"
+- "pwm": "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp"
+- "uart1": "uart1_grp"
+
+Additionally available on BCM4709 and BCM53012:
+- "mdio": "mdio_grp"
+- "uart2": "uart2_grp"
+- "sdio": "sdio_pwr_grp", "sdio_1p8v_grp"
+
+For documentation of subnodes see:
+Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Example:
+ dmu@1800c000 {
+ compatible = "simple-bus";
+ ranges = <0 0x1800c000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cru@100 {
+ compatible = "simple-bus";
+ reg = <0x100 0x1a4>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pin-controller@1c0 {
+ compatible = "brcm,bcm4708-pinmux";
+ reg = <0x1c0 0x24>;
+ reg-names = "cru_gpio_control";
+
+ spi-pins {
+ function = "spi";
+ groups = "spi_grp";
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
index ca313a7aeaff..af20b0ec715c 100644
--- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
@@ -20,16 +20,30 @@ Required properties:
- compatible: One of:
- "ingenic,jz4740-pinctrl"
+ - "ingenic,jz4725b-pinctrl"
- "ingenic,jz4770-pinctrl"
- "ingenic,jz4780-pinctrl"
- reg: Address range of the pinctrl registers.
-GPIO sub-nodes
---------------
+Required properties for sub-nodes (GPIO chips):
+-----------------------------------------------
-The pinctrl node can have optional sub-nodes for the Ingenic GPIO driver;
-please refer to ../gpio/ingenic,gpio.txt.
+ - compatible: Must contain one of:
+ - "ingenic,jz4740-gpio"
+ - "ingenic,jz4770-gpio"
+ - "ingenic,jz4780-gpio"
+ - reg: The GPIO bank number.
+ - interrupt-controller: Marks the device node as an interrupt controller.
+ - interrupts: Interrupt specifier for the controllers interrupt.
+ - #interrupt-cells: Should be 2. Refer to
+ ../interrupt-controller/interrupts.txt for more details.
+ - gpio-controller: Marks the device node as a GPIO controller.
+ - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
+ cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
+ GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
+ - gpio-ranges: Range of pins managed by the GPIO controller. Refer to
+ ../gpio/gpio.txt for more details.
Example:
@@ -38,4 +52,21 @@ Example:
pinctrl: pin-controller@10010000 {
compatible = "ingenic,jz4740-pinctrl";
reg = <0x10010000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpa: gpio@0 {
+ compatible = "ingenic,jz4740-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <28>;
+ };
};
diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
index 54ecb8ab7788..82ead40311f6 100644
--- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
@@ -13,6 +13,8 @@ Required properties for the root node:
"amlogic,meson-gxl-aobus-pinctrl"
"amlogic,meson-axg-periphs-pinctrl"
"amlogic,meson-axg-aobus-pinctrl"
+ "amlogic,meson-g12a-periphs-pinctrl"
+ "amlogic,meson-g12a-aobus-pinctrl"
- reg: address and size of registers controlling irq functionality
=== GPIO sub-nodes ===
diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt
new file mode 100644
index 000000000000..83f4bbac94bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt
@@ -0,0 +1,216 @@
+Nuvoton NPCM7XX Pin Controllers
+
+The Nuvoton BMC NPCM7XX Pin Controller multi-function routed through
+the multiplexing block, Each pin supports GPIO functionality (GPIOx)
+and multiple functions that directly connect the pin to different
+hardware blocks.
+
+Required properties:
+- #address-cells : should be 1.
+- #size-cells : should be 1.
+- compatible : "nuvoton,npcm750-pinctrl" for Poleg NPCM7XX.
+- ranges : defines mapping ranges between pin controller node (parent)
+ to GPIO bank node (children).
+
+=== GPIO Bank Subnode ===
+
+The NPCM7XX has 8 GPIO Banks each GPIO bank supports 32 GPIO.
+
+Required GPIO Bank subnode-properties:
+- reg : specifies physical base address and size of the GPIO
+ bank registers.
+- gpio-controller : Marks the device node as a GPIO controller.
+- #gpio-cells : Must be <2>. The first cell is the gpio pin number
+ and the second cell is used for optional parameters.
+- interrupts : contain the GPIO bank interrupt with flags for falling edge.
+- gpio-ranges : defines the range of pins managed by the GPIO bank controller.
+
+For example, GPIO bank subnodes like the following:
+ gpio0: gpio@f0010000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ };
+
+=== Pin Mux Subnode ===
+
+- pin: A string containing the name of the pin
+ An array of strings, each string containing the name of a pin.
+ These pin are used for selecting pin configuration.
+
+The following are the list of pins available:
+ "GPIO0/IOX1DI", "GPIO1/IOX1LD", "GPIO2/IOX1CK", "GPIO3/IOX1D0",
+ "GPIO4/IOX2DI/SMB1DSDA", "GPIO5/IOX2LD/SMB1DSCL", "GPIO6/IOX2CK/SMB2DSDA",
+ "GPIO7/IOX2D0/SMB2DSCL", "GPIO8/LKGPO1", "GPIO9/LKGPO2", "GPIO10/IOXHLD",
+ "GPIO11/IOXHCK", "GPIO12/GSPICK/SMB5BSCL", "GPIO13/GSPIDO/SMB5BSDA",
+ "GPIO14/GSPIDI/SMB5CSCL", "GPIO15/GSPICS/SMB5CSDA", "GPIO16/LKGPO0",
+ "GPIO17/PSPI2DI/SMB4DEN","GPIO18/PSPI2D0/SMB4BSDA", "GPIO19/PSPI2CK/SMB4BSCL",
+ "GPIO20/SMB4CSDA/SMB15SDA", "GPIO21/SMB4CSCL/SMB15SCL", "GPIO22/SMB4DSDA/SMB14SDA",
+ "GPIO23/SMB4DSCL/SMB14SCL", "GPIO24/IOXHDO", "GPIO25/IOXHDI", "GPIO26/SMB5SDA",
+ "GPIO27/SMB5SCL", "GPIO28/SMB4SDA", "GPIO29/SMB4SCL", "GPIO30/SMB3SDA",
+ "GPIO31/SMB3SCL", "GPIO32/nSPI0CS1","SPI0D2", "SPI0D3", "GPIO37/SMB3CSDA",
+ "GPIO38/SMB3CSCL", "GPIO39/SMB3BSDA", "GPIO40/SMB3BSCL", "GPIO41/BSPRXD",
+ "GPO42/BSPTXD/STRAP11", "GPIO43/RXD1/JTMS2/BU1RXD", "GPIO44/nCTS1/JTDI2/BU1CTS",
+ "GPIO45/nDCD1/JTDO2", "GPIO46/nDSR1/JTCK2", "GPIO47/nRI1/JCP_RDY2",
+ "GPIO48/TXD2/BSPTXD", "GPIO49/RXD2/BSPRXD", "GPIO50/nCTS2", "GPO51/nRTS2/STRAP2",
+ "GPIO52/nDCD2", "GPO53/nDTR2_BOUT2/STRAP1", "GPIO54/nDSR2", "GPIO55/nRI2",
+ "GPIO56/R1RXERR", "GPIO57/R1MDC", "GPIO58/R1MDIO", "GPIO59/SMB3DSDA",
+ "GPIO60/SMB3DSCL", "GPO61/nDTR1_BOUT1/STRAP6", "GPO62/nRTST1/STRAP5",
+ "GPO63/TXD1/STRAP4", "GPIO64/FANIN0", "GPIO65/FANIN1", "GPIO66/FANIN2",
+ "GPIO67/FANIN3", "GPIO68/FANIN4", "GPIO69/FANIN5", "GPIO70/FANIN6", "GPIO71/FANIN7",
+ "GPIO72/FANIN8", "GPIO73/FANIN9", "GPIO74/FANIN10", "GPIO75/FANIN11",
+ "GPIO76/FANIN12", "GPIO77/FANIN13","GPIO78/FANIN14", "GPIO79/FANIN15",
+ "GPIO80/PWM0", "GPIO81/PWM1", "GPIO82/PWM2", "GPIO83/PWM3", "GPIO84/R2TXD0",
+ "GPIO85/R2TXD1", "GPIO86/R2TXEN", "GPIO87/R2RXD0", "GPIO88/R2RXD1", "GPIO89/R2CRSDV",
+ "GPIO90/R2RXERR", "GPIO91/R2MDC", "GPIO92/R2MDIO", "GPIO93/GA20/SMB5DSCL",
+ "GPIO94/nKBRST/SMB5DSDA", "GPIO95/nLRESET/nESPIRST", "GPIO96/RG1TXD0",
+ "GPIO97/RG1TXD1", "GPIO98/RG1TXD2", "GPIO99/RG1TXD3","GPIO100/RG1TXC",
+ "GPIO101/RG1TXCTL", "GPIO102/RG1RXD0", "GPIO103/RG1RXD1", "GPIO104/RG1RXD2",
+ "GPIO105/RG1RXD3", "GPIO106/RG1RXC", "GPIO107/RG1RXCTL", "GPIO108/RG1MDC",
+ "GPIO109/RG1MDIO", "GPIO110/RG2TXD0/DDRV0", "GPIO111/RG2TXD1/DDRV1",
+ "GPIO112/RG2TXD2/DDRV2", "GPIO113/RG2TXD3/DDRV3", "GPIO114/SMB0SCL",
+ "GPIO115/SMB0SDA", "GPIO116/SMB1SCL", "GPIO117/SMB1SDA", "GPIO118/SMB2SCL",
+ "GPIO119/SMB2SDA", "GPIO120/SMB2CSDA", "GPIO121/SMB2CSCL", "GPIO122/SMB2BSDA",
+ "GPIO123/SMB2BSCL", "GPIO124/SMB1CSDA", "GPIO125/SMB1CSCL","GPIO126/SMB1BSDA",
+ "GPIO127/SMB1BSCL", "GPIO128/SMB8SCL", "GPIO129/SMB8SDA", "GPIO130/SMB9SCL",
+ "GPIO131/SMB9SDA", "GPIO132/SMB10SCL", "GPIO133/SMB10SDA","GPIO134/SMB11SCL",
+ "GPIO135/SMB11SDA", "GPIO136/SD1DT0", "GPIO137/SD1DT1", "GPIO138/SD1DT2",
+ "GPIO139/SD1DT3", "GPIO140/SD1CLK", "GPIO141/SD1WP", "GPIO142/SD1CMD",
+ "GPIO143/SD1CD/SD1PWR", "GPIO144/PWM4", "GPIO145/PWM5", "GPIO146/PWM6",
+ "GPIO147/PWM7", "GPIO148/MMCDT4", "GPIO149/MMCDT5", "GPIO150/MMCDT6",
+ "GPIO151/MMCDT7", "GPIO152/MMCCLK", "GPIO153/MMCWP", "GPIO154/MMCCMD",
+ "GPIO155/nMMCCD/nMMCRST", "GPIO156/MMCDT0", "GPIO157/MMCDT1", "GPIO158/MMCDT2",
+ "GPIO159/MMCDT3", "GPIO160/CLKOUT/RNGOSCOUT", "GPIO161/nLFRAME/nESPICS",
+ "GPIO162/SERIRQ", "GPIO163/LCLK/ESPICLK", "GPIO164/LAD0/ESPI_IO0",
+ "GPIO165/LAD1/ESPI_IO1", "GPIO166/LAD2/ESPI_IO2", "GPIO167/LAD3/ESPI_IO3",
+ "GPIO168/nCLKRUN/nESPIALERT", "GPIO169/nSCIPME", "GPIO170/nSMI", "GPIO171/SMB6SCL",
+ "GPIO172/SMB6SDA", "GPIO173/SMB7SCL", "GPIO174/SMB7SDA", "GPIO175/PSPI1CK/FANIN19",
+ "GPIO176/PSPI1DO/FANIN18", "GPIO177/PSPI1DI/FANIN17", "GPIO178/R1TXD0",
+ "GPIO179/R1TXD1", "GPIO180/R1TXEN", "GPIO181/R1RXD0", "GPIO182/R1RXD1",
+ "GPIO183/SPI3CK", "GPO184/SPI3D0/STRAP9", "GPO185/SPI3D1/STRAP10",
+ "GPIO186/nSPI3CS0", "GPIO187/nSPI3CS1", "GPIO188/SPI3D2/nSPI3CS2",
+ "GPIO189/SPI3D3/nSPI3CS3", "GPIO190/nPRD_SMI", "GPIO191", "GPIO192", "GPIO193/R1CRSDV",
+ "GPIO194/SMB0BSCL", "GPIO195/SMB0BSDA", "GPIO196/SMB0CSCL", "GPIO197/SMB0DEN",
+ "GPIO198/SMB0DSDA", "GPIO199/SMB0DSCL", "GPIO200/R2CK", "GPIO201/R1CK",
+ "GPIO202/SMB0CSDA", "GPIO203/FANIN16", "GPIO204/DDC2SCL", "GPIO205/DDC2SDA",
+ "GPIO206/HSYNC2", "GPIO207/VSYNC2", "GPIO208/RG2TXC/DVCK", "GPIO209/RG2TXCTL/DDRV4",
+ "GPIO210/RG2RXD0/DDRV5", "GPIO211/RG2RXD1/DDRV6", "GPIO212/RG2RXD2/DDRV7",
+ "GPIO213/RG2RXD3/DDRV8", "GPIO214/RG2RXC/DDRV9", "GPIO215/RG2RXCTL/DDRV10",
+ "GPIO216/RG2MDC/DDRV11", "GPIO217/RG2MDIO/DVHSYNC", "GPIO218/nWDO1",
+ "GPIO219/nWDO2", "GPIO220/SMB12SCL", "GPIO221/SMB12SDA", "GPIO222/SMB13SCL",
+ "GPIO223/SMB13SDA", "GPIO224/SPIXCK", "GPO225/SPIXD0/STRAP12", "GPO226/SPIXD1/STRAP13",
+ "GPIO227/nSPIXCS0", "GPIO228/nSPIXCS1", "GPO229/SPIXD2/STRAP3", "GPIO230/SPIXD3",
+ "GPIO231/nCLKREQ", "GPI255/DACOSEL"
+
+Optional Properties:
+ bias-disable, bias-pull-down, bias-pull-up, input-enable,
+ input-disable, output-high, output-low, drive-push-pull,
+ drive-open-drain, input-debounce, slew-rate, drive-strength
+
+ slew-rate valid arguments are:
+ <0> - slow
+ <1> - fast
+ drive-strength valid arguments are:
+ <2> - 2mA
+ <4> - 4mA
+ <8> - 8mA
+ <12> - 12mA
+ <16> - 16mA
+ <24> - 24mA
+
+For example, pinctrl might have pinmux subnodes like the following:
+
+ gpio0_iox1d1_pin: gpio0-iox1d1-pin {
+ pins = "GPIO0/IOX1DI";
+ output-high;
+ };
+ gpio0_iox1ck_pin: gpio0-iox1ck-pin {
+ pins = "GPIO2/IOX1CK";
+ output_high;
+ };
+
+=== Pin Group Subnode ===
+
+Required pin group subnode-properties:
+- groups : A string containing the name of the group to mux.
+- function: A string containing the name of the function to mux to the
+ group.
+
+The following are the list of the available groups and functions :
+ smb0, smb0b, smb0c, smb0d, smb0den, smb1, smb1b, smb1c, smb1d,
+ smb2, smb2b, smb2c, smb2d, smb3, smb3b, smb3c, smb3d, smb4, smb4b,
+ smb4c, smb4d, smb4den, smb5, smb5b, smb5c, smb5d, ga20kbc, smb6,
+ smb7, smb8, smb9, smb10, smb11, smb12, smb13, smb14, smb15, fanin0,
+ fanin1, fanin2, fanin3, fanin4, fanin5, fanin6, fanin7, fanin8,
+ fanin9, fanin10, fanin11 fanin12 fanin13, fanin14, fanin15, faninx,
+ pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, pwm6, pwm7, rg1, rg1mdio, rg2,
+ rg2mdio, ddr, uart1, uart2, bmcuart0a, bmcuart0b, bmcuart1, iox1,
+ iox2, ioxh, gspi, mmc, mmcwp, mmccd, mmcrst, mmc8, r1, r1err, r1md,
+ r2, r2err, r2md, sd1, sd1pwr, wdog1, wdog2, scipme, sci, serirq,
+ jtag2, spix, spixcs1, pspi1, pspi2, ddc, clkreq, clkout, spi3, spi3cs1,
+ spi3quad, spi3cs2, spi3cs3, spi0cs1, lpc, lpcclk, espi, lkgpo0, lkgpo1,
+ lkgpo2, nprd_smi
+
+For example, pinctrl might have group subnodes like the following:
+ r1err_pins: r1err-pins {
+ groups = "r1err";
+ function = "r1err";
+ };
+ r1md_pins: r1md-pins {
+ groups = "r1md";
+ function = "r1md";
+ };
+ r1_pins: r1-pins {
+ groups = "r1";
+ function = "r1";
+ };
+
+Examples
+========
+pinctrl: pinctrl@f0800000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "nuvoton,npcm750-pinctrl";
+ ranges = <0 0xf0010000 0x8000>;
+
+ gpio0: gpio@f0010000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ };
+
+ ....
+
+ gpio7: gpio@f0017000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x7000 0x80>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&pinctrl 0 224 32>;
+ };
+
+ gpio0_iox1d1_pin: gpio0-iox1d1-pin {
+ pins = "GPIO0/IOX1DI";
+ output-high;
+ };
+
+ iox1_pins: iox1-pins {
+ groups = "iox1";
+ function = "iox1";
+ };
+ iox2_pins: iox2-pins {
+ groups = "iox2";
+ function = "iox2";
+ };
+
+ ....
+
+ clkreq_pins: clkreq-pins {
+ groups = "clkreq";
+ function = "clkreq";
+ };
+}; \ No newline at end of file
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
index ffd4345415f3..ab4000eab07d 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
@@ -19,6 +19,7 @@ PMIC's from Qualcomm.
"qcom,pm8998-gpio"
"qcom,pma8084-gpio"
"qcom,pmi8994-gpio"
+ "qcom,pms405-gpio"
And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
if the device is on an spmi bus or an ssbi bus respectively
@@ -91,6 +92,7 @@ to specify in a pin configuration subnode:
gpio1-gpio26 for pm8998
gpio1-gpio22 for pma8084
gpio1-gpio10 for pmi8994
+ gpio1-gpio11 for pms405
- function:
Usage: required
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt
new file mode 100644
index 000000000000..2b8f77762edc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt
@@ -0,0 +1,199 @@
+Qualcomm QCS404 TLMM block
+
+This binding describes the Top Level Mode Multiplexer block found in the
+QCS404 platform.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be "qcom,qcs404-pinctrl"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: the base address and size of the north, south and east TLMM
+ tiles.
+
+- reg-names:
+ Usage: required
+ Value type: <stringlist>
+ Defintiion: names for the cells of reg, must contain "north", "south"
+ and "east".
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the TLMM summary IRQ.
+
+- interrupt-controller:
+ Usage: required
+ Value type: <none>
+ Definition: identifies this node as an interrupt controller
+
+- #interrupt-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 2. Specifying the pin number and flags, as defined
+ in <dt-bindings/interrupt-controller/irq.h>
+
+- gpio-controller:
+ Usage: required
+ Value type: <none>
+ Definition: identifies this node as a gpio controller
+
+- #gpio-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 2. Specifying the pin number and flags, as defined
+ in <dt-bindings/gpio/gpio.h>
+
+- gpio-ranges:
+ Usage: required
+ Definition: see ../gpio/gpio.txt
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+ Usage: required
+ Value type: <string-array>
+ Definition: List of gpio pins affected by the properties specified in
+ this subnode.
+
+ Valid pins are:
+ gpio0-gpio119
+ Supports mux, bias and drive-strength
+
+ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
+ sdc2_data
+ Supports bias and drive-strength
+
+ ufs_reset
+ Supports bias and drive-strength
+
+- function:
+ Usage: required
+ Value type: <string>
+ Definition: Specify the alternative function to be configured for the
+ specified pins. Functions are only valid for gpio pins.
+ Valid values are:
+
+ gpio, hdmi_tx, hdmi_ddc, blsp_uart_tx_a2, blsp_spi2, m_voc,
+ qdss_cti_trig_in_a0, blsp_uart_rx_a2, qdss_tracectl_a,
+ blsp_uart2, aud_cdc, blsp_i2c_sda_a2, qdss_tracedata_a,
+ blsp_i2c_scl_a2, qdss_tracectl_b, qdss_cti_trig_in_b0,
+ blsp_uart1, blsp_spi_mosi_a1, blsp_spi_miso_a1,
+ qdss_tracedata_b, blsp_i2c1, blsp_spi_cs_n_a1, gcc_plltest,
+ blsp_spi_clk_a1, rgb_data0, blsp_uart5, blsp_spi5,
+ adsp_ext, rgb_data1, prng_rosc, rgb_data2, blsp_i2c5,
+ gcc_gp1_clk_b, rgb_data3, gcc_gp2_clk_b, blsp_spi0,
+ blsp_uart0, gcc_gp3_clk_b, blsp_i2c0, qdss_traceclk_b,
+ pcie_clk, nfc_irq, blsp_spi4, nfc_dwl, audio_ts, rgb_data4,
+ spi_lcd, blsp_uart_tx_b2, gcc_gp3_clk_a, rgb_data5,
+ blsp_uart_rx_b2, blsp_i2c_sda_b2, blsp_i2c_scl_b2,
+ pwm_led11, i2s_3_data0_a, ebi2_lcd, i2s_3_data1_a,
+ i2s_3_data2_a, atest_char, pwm_led3, i2s_3_data3_a,
+ pwm_led4, i2s_4, ebi2_a, dsd_clk_b, pwm_led5, pwm_led6,
+ pwm_led7, pwm_led8, pwm_led24, spkr_dac0, blsp_i2c4,
+ pwm_led9, pwm_led10, spdifrx_opt, pwm_led12, pwm_led13,
+ pwm_led14, wlan1_adc1, rgb_data_b0, pwm_led15,
+ blsp_spi_mosi_b1, wlan1_adc0, rgb_data_b1, pwm_led16,
+ blsp_spi_miso_b1, qdss_cti_trig_out_b0, wlan2_adc1,
+ rgb_data_b2, pwm_led17, blsp_spi_cs_n_b1, wlan2_adc0,
+ rgb_data_b3, pwm_led18, blsp_spi_clk_b1, rgb_data_b4,
+ pwm_led19, ext_mclk1_b, qdss_traceclk_a, rgb_data_b5,
+ pwm_led20, atest_char3, i2s_3_sck_b, ldo_update, bimc_dte0,
+ rgb_hsync, pwm_led21, i2s_3_ws_b, dbg_out, rgb_vsync,
+ i2s_3_data0_b, ldo_en, hdmi_dtest, rgb_de, i2s_3_data1_b,
+ hdmi_lbk9, rgb_clk, atest_char1, i2s_3_data2_b, ebi_cdc,
+ hdmi_lbk8, rgb_mdp, atest_char0, i2s_3_data3_b, hdmi_lbk7,
+ rgb_data_b6, rgb_data_b7, hdmi_lbk6, rgmii_int, cri_trng1,
+ rgmii_wol, cri_trng0, gcc_tlmm, rgmii_ck, rgmii_tx,
+ hdmi_lbk5, hdmi_pixel, hdmi_rcv, hdmi_lbk4, rgmii_ctl,
+ ext_lpass, rgmii_rx, cri_trng, hdmi_lbk3, hdmi_lbk2,
+ qdss_cti_trig_out_b1, rgmii_mdio, hdmi_lbk1, rgmii_mdc,
+ hdmi_lbk0, ir_in, wsa_en, rgb_data6, rgb_data7,
+ atest_char2, ebi_ch0, blsp_uart3, blsp_spi3, sd_write,
+ blsp_i2c3, gcc_gp1_clk_a, qdss_cti_trig_in_b1,
+ gcc_gp2_clk_a, ext_mclk0, mclk_in1, i2s_1, dsd_clk_a,
+ qdss_cti_trig_in_a1, rgmi_dll1, pwm_led22, pwm_led23,
+ qdss_cti_trig_out_a0, rgmi_dll2, pwm_led1,
+ qdss_cti_trig_out_a1, pwm_led2, i2s_2, pll_bist,
+ ext_mclk1_a, mclk_in2, bimc_dte1, i2s_3_sck_a, i2s_3_ws_a
+
+- bias-disable:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as no pull.
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as pull down.
+
+- bias-pull-up:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as pull up.
+
+- output-high:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in output mode, driven
+ high.
+ Not valid for sdc pins.
+
+- output-low:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in output mode, driven
+ low.
+ Not valid for sdc pins.
+
+- drive-strength:
+ Usage: optional
+ Value type: <u32>
+ Definition: Selects the drive strength for the specified pins, in mA.
+ Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
+
+Example:
+
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,qcs404-pinctrl";
+ reg = <0x01000000 0x200000>,
+ <0x01300000 0x200000>,
+ <0x07b00000 0x200000>;
+ reg-names = "south", "north", "east";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 120>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
new file mode 100644
index 000000000000..769ca83bb40d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
@@ -0,0 +1,191 @@
+Qualcomm Technologies, Inc. SDM660 TLMM block
+
+This binding describes the Top Level Mode Multiplexer block found in the
+SDM660 platform.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be "qcom,sdm660-pinctrl" or
+ "qcom,sdm630-pinctrl".
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: the base address and size of the north, center and south
+ TLMM tiles.
+
+- reg-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: names for the cells of reg, must contain "north", "center"
+ and "south".
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the TLMM summary IRQ.
+
+- interrupt-controller:
+ Usage: required
+ Value type: <none>
+ Definition: identifies this node as an interrupt controller
+
+- #interrupt-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 2. Specifying the pin number and flags, as defined
+ in <dt-bindings/interrupt-controller/irq.h>
+
+- gpio-controller:
+ Usage: required
+ Value type: <none>
+ Definition: identifies this node as a gpio controller
+
+- gpio-ranges:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Specifies the mapping between gpio controller and
+ pin-controller pins.
+
+- #gpio-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 2. Specifying the pin number and flags, as defined
+ in <dt-bindings/gpio/gpio.h>
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+ Usage: required
+ Value type: <string-array>
+ Definition: List of gpio pins affected by the properties specified in
+ this subnode. Valid pins are:
+ gpio0-gpio113,
+ Supports mux, bias and drive-strength
+ sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, sdc2_data sdc1_rclk,
+ Supports bias and drive-strength
+
+- function:
+ Usage: required
+ Value type: <string>
+ Definition: Specify the alternative function to be configured for the
+ specified pins. Functions are only valid for gpio pins.
+ Valid values are:
+ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
+ atest_char2, atest_char3, atest_gpsadc0, atest_gpsadc1,
+ atest_tsens, atest_tsens2, atest_usb1, atest_usb10,
+ atest_usb11, atest_usb12, atest_usb13, atest_usb2,
+ atest_usb20, atest_usb21, atest_usb22, atest_usb23,
+ audio_ref, bimc_dte0, bimc_dte1, blsp_i2c1, blsp_i2c2,
+ blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7,
+ blsp_i2c8_a, blsp_i2c8_b, blsp_spi1, blsp_spi2, blsp_spi3,
+ blsp_spi3_cs1, blsp_spi3_cs2, blsp_spi4, blsp_spi5,
+ blsp_spi6, blsp_spi7, blsp_spi8_a, blsp_spi8_b,
+ blsp_spi8_cs1, blsp_spi8_cs2, blsp_uart1, blsp_uart2,
+ blsp_uart5, blsp_uart6_a, blsp_uart6_b, blsp_uim1,
+ blsp_uim2, blsp_uim5, blsp_uim6, cam_mclk, cci_async,
+ cci_i2c, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist,
+ gcc_gp1, gcc_gp2, gcc_gp3, gpio, gps_tx_a, gps_tx_b, gps_tx_c,
+ isense_dbg, jitter_bist, ldo_en, ldo_update, m_voc, mdp_vsync,
+ mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, mss_lte,
+ nav_pps_a, nav_pps_b, nav_pps_c, pa_indicator, phase_flag0,
+ phase_flag1, phase_flag10, phase_flag11, phase_flag12,
+ phase_flag13, phase_flag14, phase_flag15, phase_flag16,
+ phase_flag17, phase_flag18, phase_flag19, phase_flag2,
+ phase_flag20, phase_flag21, phase_flag22, phase_flag23,
+ phase_flag24, phase_flag25, phase_flag26, phase_flag27,
+ phase_flag28, phase_flag29, phase_flag3, phase_flag30,
+ phase_flag31, phase_flag4, phase_flag5, phase_flag6,
+ phase_flag7, phase_flag8, phase_flag9, pll_bypassnl,
+ pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, pwr_crypto,
+ pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b, qdss_cti1_a,
+ qdss_cti1_b, qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10,
+ qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15,
+ qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6,
+ qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink_enable, qlink_request,
+ qspi_clk, qspi_cs, qspi_data0, qspi_data1, qspi_data2,
+ qspi_data3, qspi_resetn, sec_mi2s, sndwire_clk, sndwire_data,
+ sp_cmu, ssc_irq, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2,
+ uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
+ uim2_data, uim2_present, uim2_reset, uim_batt, vfr_1,
+ vsense_clkout, vsense_data0, vsense_data1, vsense_mode,
+ wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1
+
+- bias-disable:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as no pull.
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as pull down.
+
+- bias-pull-up:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as pull up.
+
+- output-high:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in output mode, driven
+ high.
+ Not valid for sdc pins.
+
+- output-low:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in output mode, driven
+ low.
+ Not valid for sdc pins.
+
+- drive-strength:
+ Usage: optional
+ Value type: <u32>
+ Definition: Selects the drive strength for the specified pins, in mA.
+ Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
+
+Example:
+
+ tlmm: pinctrl@3100000 {
+ compatible = "qcom,sdm660-pinctrl";
+ reg = <0x3100000 0x200000>,
+ <0x3500000 0x200000>,
+ <0x3900000 0x200000>;
+ reg-names = "south", "center", "north";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&tlmm 0 0 114>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
index abd8fbcf1e62..3902efa18fd0 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
@@ -14,8 +14,11 @@ Required Properties:
- "renesas,pfc-r8a73a4": for R8A73A4 (R-Mobile APE6) compatible pin-controller.
- "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1) compatible pin-controller.
- "renesas,pfc-r8a7743": for R8A7743 (RZ/G1M) compatible pin-controller.
+ - "renesas,pfc-r8a7744": for R8A7744 (RZ/G1N) compatible pin-controller.
- "renesas,pfc-r8a7745": for R8A7745 (RZ/G1E) compatible pin-controller.
- "renesas,pfc-r8a77470": for R8A77470 (RZ/G1C) compatible pin-controller.
+ - "renesas,pfc-r8a774a1": for R8A774A1 (RZ/G2M) compatible pin-controller.
+ - "renesas,pfc-r8a774c0": for R8A774C0 (RZ/G2E) compatible pin-controller.
- "renesas,pfc-r8a7778": for R8A7778 (R-Car M1) compatible pin-controller.
- "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller.
- "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller.
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
new file mode 100644
index 000000000000..25e53acd523e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
@@ -0,0 +1,153 @@
+Renesas RZ/N1 SoC Pinctrl node description.
+
+Pin controller node
+-------------------
+Required properties:
+- compatible: SoC-specific compatible string "renesas,<soc-specific>-pinctrl"
+ followed by "renesas,rzn1-pinctrl" as fallback. The SoC-specific compatible
+ strings must be one of:
+ "renesas,r9a06g032-pinctrl" for RZ/N1D
+ "renesas,r9a06g033-pinctrl" for RZ/N1S
+- reg: Address base and length of the memory area where the pin controller
+ hardware is mapped to.
+- clocks: phandle for the clock, see the description of clock-names below.
+- clock-names: Contains the name of the clock:
+ "bus", the bus clock, sometimes described as pclk, for register accesses.
+
+Example:
+ pinctrl: pin-controller@40067000 {
+ compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
+ reg = <0x40067000 0x1000>, <0x51000000 0x480>;
+ clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>;
+ clock-names = "bus";
+ };
+
+Sub-nodes
+---------
+
+The child nodes of the pin controller node describe a pin multiplexing
+function.
+
+- Pin multiplexing sub-nodes:
+ A pin multiplexing sub-node describes how to configure a set of
+ (or a single) pin in some desired alternate function mode.
+ A single sub-node may define several pin configurations.
+ Please refer to pinctrl-bindings.txt to get to know more on generic
+ pin properties usage.
+
+ The allowed generic formats for a pin multiplexing sub-node are the
+ following ones:
+
+ node-1 {
+ pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
+ GENERIC_PINCONFIG;
+ };
+
+ node-2 {
+ sub-node-1 {
+ pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
+ GENERIC_PINCONFIG;
+ };
+
+ sub-node-2 {
+ pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
+ GENERIC_PINCONFIG;
+ };
+
+ ...
+
+ sub-node-n {
+ pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
+ GENERIC_PINCONFIG;
+ };
+ };
+
+ node-3 {
+ pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
+ GENERIC_PINCONFIG;
+
+ sub-node-1 {
+ pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
+ GENERIC_PINCONFIG;
+ };
+
+ ...
+
+ sub-node-n {
+ pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
+ GENERIC_PINCONFIG;
+ };
+ };
+
+ Use the latter two formats when pins part of the same logical group need to
+ have different generic pin configuration flags applied. Note that the generic
+ pinconfig in node-3 does not apply to the sub-nodes.
+
+ Client sub-nodes shall refer to pin multiplexing sub-nodes using the phandle
+ of the most external one.
+
+ Eg.
+
+ client-1 {
+ ...
+ pinctrl-0 = <&node-1>;
+ ...
+ };
+
+ client-2 {
+ ...
+ pinctrl-0 = <&node-2>;
+ ...
+ };
+
+ Required properties:
+ - pinmux:
+ integer array representing pin number and pin multiplexing configuration.
+ When a pin has to be configured in alternate function mode, use this
+ property to identify the pin by its global index, and provide its
+ alternate function configuration number along with it.
+ When multiple pins are required to be configured as part of the same
+ alternate function they shall be specified as members of the same
+ argument list of a single "pinmux" property.
+ Integers values in the "pinmux" argument list are assembled as:
+ (PIN | MUX_FUNC << 8)
+ where PIN directly corresponds to the pl_gpio pin number and MUX_FUNC is
+ one of the alternate function identifiers defined in:
+ <include/dt-bindings/pinctrl/rzn1-pinctrl.h>
+ These identifiers collapse the IO Multiplex Configuration Level 1 and
+ Level 2 numbers that are detailed in the hardware reference manual into a
+ single number. The identifiers for Level 2 are simply offset by 10.
+ Additional identifiers are provided to specify the MDIO source peripheral.
+
+ Optional generic pinconf properties:
+ - bias-disable - disable any pin bias
+ - bias-pull-up - pull up the pin with 50 KOhm
+ - bias-pull-down - pull down the pin with 50 KOhm
+ - bias-high-impedance - high impedance mode
+ - drive-strength - sink or source at most 4, 6, 8 or 12 mA
+
+ Example:
+ A serial communication interface with a TX output pin and an RX input pin.
+
+ &pinctrl {
+ pins_uart0: pins_uart0 {
+ pinmux = <
+ RZN1_PINMUX(103, RZN1_FUNC_UART0_I) /* UART0_TXD */
+ RZN1_PINMUX(104, RZN1_FUNC_UART0_I) /* UART0_RXD */
+ >;
+ };
+ };
+
+ Example 2:
+ Here we set the pull up on the RXD pin of the UART.
+
+ &pinctrl {
+ pins_uart0: pins_uart0 {
+ pinmux = <RZN1_PINMUX(103, RZN1_FUNC_UART0_I)>; /* TXD */
+
+ pins_uart6_rx {
+ pinmux = <RZN1_PINMUX(104, RZN1_FUNC_UART0_I)>; /* RXD */
+ bias-pull-up;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/actions,owl-sps.txt b/Documentation/devicetree/bindings/power/actions,owl-sps.txt
index 78edd63641e8..a3571937b019 100644
--- a/Documentation/devicetree/bindings/power/actions,owl-sps.txt
+++ b/Documentation/devicetree/bindings/power/actions,owl-sps.txt
@@ -3,11 +3,13 @@ Actions Semi Owl Smart Power System (SPS)
Required properties:
- compatible : "actions,s500-sps" for S500
"actions,s700-sps" for S700
+ "actions,s900-sps" for S900
- reg : Offset and length of the register set for the device.
- #power-domain-cells : Must be 1.
See macros in:
include/dt-bindings/power/owl-s500-powergate.h for S500
include/dt-bindings/power/owl-s700-powergate.h for S700
+ include/dt-bindings/power/owl-s900-powergate.h for S900
Example:
diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.txt b/Documentation/devicetree/bindings/power/renesas,apmu.txt
index f747f95eee58..5f24586c8cf3 100644
--- a/Documentation/devicetree/bindings/power/renesas,apmu.txt
+++ b/Documentation/devicetree/bindings/power/renesas,apmu.txt
@@ -8,7 +8,9 @@ Required properties:
- compatible: Should be "renesas,<soctype>-apmu", "renesas,apmu" as fallback.
Examples with soctypes are:
- "renesas,r8a7743-apmu" (RZ/G1M)
+ - "renesas,r8a7744-apmu" (RZ/G1N)
- "renesas,r8a7745-apmu" (RZ/G1E)
+ - "renesas,r8a77470-apmu" (RZ/G1C)
- "renesas,r8a7790-apmu" (R-Car H2)
- "renesas,r8a7791-apmu" (R-Car M2-W)
- "renesas,r8a7792-apmu" (R-Car V2H)
diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
index 180ae65be753..eae2a880155a 100644
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
@@ -8,8 +8,11 @@ and various coprocessors.
Required properties:
- compatible: Must contain exactly one of the following:
- "renesas,r8a7743-sysc" (RZ/G1M)
+ - "renesas,r8a7744-sysc" (RZ/G1N)
- "renesas,r8a7745-sysc" (RZ/G1E)
- "renesas,r8a77470-sysc" (RZ/G1C)
+ - "renesas,r8a774a1-sysc" (RZ/G2M)
+ - "renesas,r8a774c0-sysc" (RZ/G2E)
- "renesas,r8a7779-sysc" (R-Car H1)
- "renesas,r8a7790-sysc" (R-Car H2)
- "renesas,r8a7791-sysc" (R-Car M2-W)
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
index 651491bb63b7..5705f575862d 100644
--- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
@@ -6,7 +6,10 @@ and resin along with the Android reboot-mode.
This DT node has pwrkey and resin as sub nodes.
Required Properties:
--compatible: "qcom,pm8916-pon"
+-compatible: Must be one of:
+ "qcom,pm8916-pon"
+ "qcom,pms405-pon"
+
-reg: Specifies the physical address of the pon register
Optional subnode:
diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.txt b/Documentation/devicetree/bindings/power/supply/bq25890.txt
index c9dd17d142ad..dc0568933359 100644
--- a/Documentation/devicetree/bindings/power/supply/bq25890.txt
+++ b/Documentation/devicetree/bindings/power/supply/bq25890.txt
@@ -1,5 +1,8 @@
Binding for TI bq25890 Li-Ion Charger
+This driver will support the bq25896 and the bq25890. There are other ICs
+in the same family but those have not been tested.
+
Required properties:
- compatible: Should contain one of the following:
* "ti,bq25890"
diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.txt b/Documentation/devicetree/bindings/power/supply/bq27xxx.txt
index 37994fdb18ca..4fa8e08df2b6 100644
--- a/Documentation/devicetree/bindings/power/supply/bq27xxx.txt
+++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.txt
@@ -23,6 +23,7 @@ Required properties:
* "ti,bq27546" - BQ27546
* "ti,bq27742" - BQ27742
* "ti,bq27545" - BQ27545
+ * "ti,bq27411" - BQ27411
* "ti,bq27421" - BQ27421
* "ti,bq27425" - BQ27425
* "ti,bq27426" - BQ27426
diff --git a/Documentation/devicetree/bindings/power/supply/sc2731_charger.txt b/Documentation/devicetree/bindings/power/supply/sc2731_charger.txt
new file mode 100644
index 000000000000..5266fab16575
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sc2731_charger.txt
@@ -0,0 +1,40 @@
+Spreadtrum SC2731 PMIC battery charger binding
+
+Required properties:
+ - compatible: Should be "sprd,sc2731-charger".
+ - reg: Address offset of charger register.
+ - phys: Contains a phandle to the USB phy.
+
+Optional Properties:
+- monitored-battery: phandle of battery characteristics devicetree node.
+ The charger uses the following battery properties:
+- charge-term-current-microamp: current for charge termination phase.
+- constant-charge-voltage-max-microvolt: maximum constant input voltage.
+ See Documentation/devicetree/bindings/power/supply/battery.txt
+
+Example:
+
+ bat: battery {
+ compatible = "simple-battery";
+ charge-term-current-microamp = <120000>;
+ constant-charge-voltage-max-microvolt = <4350000>;
+ ......
+ };
+
+ sc2731_pmic: pmic@0 {
+ compatible = "sprd,sc2731";
+ reg = <0>;
+ spi-max-frequency = <26000000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@0 {
+ compatible = "sprd,sc2731-charger";
+ reg = <0x0>;
+ phys = <&ssphy>;
+ monitored-battery = <&bat>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
index c7610718adff..f9be1acf891c 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -12,6 +12,11 @@ Optional properties:
disabled. This binding is a workaround to keep backward compatibility with
old dtb's which rely on the fact that the switched regulators are always on
and don't mark them explicit as "regulator-always-on".
+- fsl,pmic-stby-poweroff: if present, configure the PMIC to shutdown all
+ power rails when PMIC_STBY_REQ line is asserted during the power off sequence.
+ Use this option if the SoC should be powered off by external power
+ management IC (PMIC) on PMIC_STBY_REQ signal.
+ As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal.
Required child node:
- regulators: This is the list of child nodes that specify the regulator
diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
index 58a1d97972f5..45025b5b67f6 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
@@ -26,6 +26,7 @@ Regulator nodes are identified by their compatible:
"qcom,rpm-pm8998-regulators"
"qcom,rpm-pma8084-regulators"
"qcom,rpm-pmi8998-regulators"
+ "qcom,rpm-pms405-regulators"
- vdd_s1-supply:
- vdd_s2-supply:
@@ -188,6 +189,24 @@ Regulator nodes are identified by their compatible:
Definition: reference to regulator supplying the input pin, as
described in the data sheet
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_s4-supply:
+- vdd_s5-supply:
+- vdd_l1_l2-supply:
+- vdd_l3_l8-supply:
+- vdd_l4-supply:
+- vdd_l5_l6-supply:
+- vdd_l7-supply:
+- vdd_l3_l8-supply:
+- vdd_l9-supply:
+- vdd_l10_l11_l12_l13-supply:
+ Usage: optional (pms405 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
The regulator node houses sub-nodes for each regulator within the device. Each
sub-node is identified using the node's name, with valid values listed for each
of the pmics below.
@@ -222,6 +241,10 @@ pma8084:
pmi8998:
bob
+pms405:
+ s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12,
+ l13
+
The content of each sub-node is defined by the standard binding for regulators -
see regulator.txt.
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
index 76ead07072b1..4b98ca26e61a 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
@@ -1,7 +1,9 @@
-ROHM BD71837 Power Management Integrated Circuit (PMIC) regulator bindings
+ROHM BD71837 and BD71847 Power Management Integrated Circuit regulator bindings
Required properties:
- - regulator-name: should be "buck1", ..., "buck8" and "ldo1", ..., "ldo7"
+ - regulator-name: should be "buck1", ..., "buck8" and "ldo1", ..., "ldo7" for
+ BD71837. For BD71847 names should be "buck1", ..., "buck6"
+ and "ldo1", ..., "ldo6"
List of regulators provided by this controller. BD71837 regulators node
should be sub node of the BD71837 MFD node. See BD71837 MFD bindings at
@@ -16,10 +18,14 @@ disabled by driver at startup. LDO5 and LDO6 are supplied by those and
if they are disabled at startup the voltage monitoring for LDO5/LDO6 will
cause PMIC to reset.
-The valid names for regulator nodes are:
+The valid names for BD71837 regulator nodes are:
BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7, BUCK8
LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7
+The valid names for BD71847 regulator nodes are:
+BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6
+LDO1, LDO2, LDO3, LDO4, LDO5, LDO6
+
Optional properties:
- Any optional property defined in bindings/regulator/regulator.txt
diff --git a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
new file mode 100644
index 000000000000..a3f476240565
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
@@ -0,0 +1,68 @@
+STMicroelectronics STPMIC1 Voltage regulators
+
+Regulator Nodes are optional depending on needs.
+
+Available Regulators in STPMIC1 device are:
+ - buck1 for Buck BUCK1
+ - buck2 for Buck BUCK2
+ - buck3 for Buck BUCK3
+ - buck4 for Buck BUCK4
+ - ldo1 for LDO LDO1
+ - ldo2 for LDO LDO2
+ - ldo3 for LDO LDO3
+ - ldo4 for LDO LDO4
+ - ldo5 for LDO LDO5
+ - ldo6 for LDO LDO6
+ - vref_ddr for LDO Vref DDR
+ - boost for Buck BOOST
+ - pwr_sw1 for VBUS_OTG switch
+ - pwr_sw2 for SW_OUT switch
+
+Switches are fixed voltage regulators with only enable/disable capability.
+
+Optional properties:
+- st,mask-reset: mask reset for this regulator: the regulator configuration
+ is maintained during pmic reset.
+- regulator-pull-down: enable high pull down
+ if not specified light pull down is used
+- regulator-over-current-protection:
+ if set, all regulators are switched off in case of over-current detection
+ on this regulator,
+ if not set, the driver only sends an over-current event.
+- interrupt-parent: phandle to the parent interrupt controller
+- interrupts: index of current limit detection interrupt
+- <regulator>-supply: phandle to the parent supply/regulator node
+ each regulator supply can be described except vref_ddr.
+
+Example:
+regulators {
+ compatible = "st,stpmic1-regulators";
+
+ ldo6-supply = <&v3v3>;
+
+ vdd_core: buck1 {
+ regulator-name = "vdd_core";
+ interrupts = <IT_CURLIM_BUCK1 0>;
+ interrupt-parent = <&pmic>;
+ st,mask-reset;
+ regulator-pull-down;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ interrupts = <IT_CURLIM_BUCK4 0>;
+ interrupt-parent = <&mypmic>;
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ v1v8: ldo6 {
+ regulator-name = "v1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-over-current-protection;
+ };
+};
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt
new file mode 100644
index 000000000000..a842a782b557
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt
@@ -0,0 +1,126 @@
+Qualcomm Technology Inc. ADSP Peripheral Image Loader
+
+This document defines the binding for a component that loads and boots firmware
+on the Qualcomm Technology Inc. ADSP Hexagon core.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,sdm845-adsp-pil"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: must specify the base address and size of the qdsp6ss register
+
+- interrupts-extended:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: must list the watchdog, fatal IRQs ready, handover and
+ stop-ack IRQs
+
+- interrupt-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
+
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: List of 8 phandle and clock specifier pairs for the adsp.
+
+- clock-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: List of clock input name strings sorted in the same
+ order as the clocks property. Definition must have
+ "xo", "sway_cbcr", "lpass_aon", "lpass_ahbs_aon_cbcr",
+ "lpass_ahbm_aon_cbcr", "qdsp6ss_xo", "qdsp6ss_sleep"
+ and "qdsp6ss_core".
+
+- power-domains:
+ Usage: required
+ Value type: <phandle>
+ Definition: reference to cx power domain node.
+
+- resets:
+ Usage: required
+ Value type: <phandle>
+ Definition: reference to the list of 2 reset-controller for the adsp.
+
+- reset-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "pdc_sync" and "cc_lpass"
+
+- qcom,halt-regs:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: a phandle reference to a syscon representing TCSR followed
+ by the offset within syscon for lpass halt register.
+
+- memory-region:
+ Usage: required
+ Value type: <phandle>
+ Definition: reference to the reserved-memory for the ADSP
+
+- qcom,smem-states:
+ Usage: required
+ Value type: <phandle>
+ Definition: reference to the smem state for requesting the ADSP to
+ shut down
+
+- qcom,smem-state-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "stop"
+
+
+= SUBNODES
+The adsp node may have an subnode named "glink-edge" that describes the
+communication edge, channels and devices related to the ADSP.
+See ../soc/qcom/qcom,glink.txt for details on how to describe these.
+
+= EXAMPLE
+The following example describes the resources needed to boot control the
+ADSP, as it is found on SDM845 boards.
+
+ remoteproc@17300000 {
+ compatible = "qcom,sdm845-adsp-pil";
+ reg = <0x17300000 0x40c>;
+
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_LPASS_SWAY_CLK>,
+ <&lpasscc LPASS_AUDIO_WRAPPER_AON_CLK>,
+ <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
+ <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
+ <&lpasscc LPASS_QDSP6SS_XO_CLK>,
+ <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
+ <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
+ clock-names = "xo", "sway_cbcr", "lpass_aon",
+ "lpass_ahbs_aon_cbcr",
+ "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
+ "qdsp6ss_sleep", "qdsp6ss_core";
+
+ power-domains = <&rpmhpd SDM845_CX>;
+
+ resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
+ <&aoss_reset AOSS_CC_LPASS_RESTART>;
+ reset-names = "pdc_sync", "cc_lpass";
+
+ qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
+
+ memory-region = <&pil_adsp_mem>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+ };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt
index 728e4193f7a6..9c0cff3a5ed8 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt
@@ -10,6 +10,11 @@ on the Qualcomm ADSP Hexagon core.
"qcom,msm8974-adsp-pil"
"qcom,msm8996-adsp-pil"
"qcom,msm8996-slpi-pil"
+ "qcom,qcs404-adsp-pas"
+ "qcom,qcs404-cdsp-pas"
+ "qcom,qcs404-wcss-pas"
+ "qcom,sdm845-adsp-pas"
+ "qcom,sdm845-cdsp-pas"
- interrupts-extended:
Usage: required
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 601dd9f389aa..9ff5b0309417 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -53,13 +53,17 @@ on the Qualcomm Hexagon core.
Definition: reference to the reset-controller for the modem sub-system
reference to the list of 3 reset-controllers for the
wcss sub-system
+ reference to the list of 2 reset-controllers for the modem
+ sub-system on SDM845 SoCs
- reset-names:
Usage: required
Value type: <stringlist>
Definition: must be "mss_restart" for the modem sub-system
- Definition: must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
- for the wcss syb-system
+ must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
+ for the wcss sub-system
+ must be "mss_restart", "pdc_reset" for the modem
+ sub-system on SDM845 SoCs
- cx-supply:
- mss-supply:
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
index 5e1afc3d8480..1ab1d109318e 100644
--- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
+++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
@@ -5,7 +5,7 @@ Please also refer to reset.txt in this directory for common reset
controller binding usage.
Required properties:
-- compatible: Should be "fsl,imx7-src", "syscon"
+- compatible: Should be "fsl,imx7d-src", "syscon"
- reg: should be register base and length as documented in the
datasheet
- interrupts: Should contain SRC interrupt
diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt b/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt
new file mode 100644
index 000000000000..a62a492843e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt
@@ -0,0 +1,52 @@
+PDC Global
+======================================
+
+This binding describes a reset-controller found on PDC-Global (Power Domain
+Controller) block for Qualcomm Technologies Inc SDM845 SoCs.
+
+Required properties:
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be:
+ "qcom,sdm845-pdc-global"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: must specify the base address and size of the register
+ space.
+
+- #reset-cells:
+ Usage: required
+ Value type: <uint>
+ Definition: must be 1; cell entry represents the reset index.
+
+Example:
+
+pdc_reset: reset-controller@b2e0000 {
+ compatible = "qcom,sdm845-pdc-global";
+ reg = <0xb2e0000 0x20000>;
+ #reset-cells = <1>;
+};
+
+PDC reset clients
+======================================
+
+Device nodes that need access to reset lines should
+specify them as a reset phandle in their corresponding node as
+specified in reset.txt.
+
+For a list of all valid reset indices see
+<dt-bindings/reset/qcom,sdm845-pdc.h>
+
+Example:
+
+modem-pil@4080000 {
+ ...
+
+ resets = <&pdc_reset PDC_MODEM_SYNC_RESET>;
+ reset-names = "pdc_reset";
+
+ ...
+};
diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt
index 67e83b02e10b..b03c48a1150e 100644
--- a/Documentation/devicetree/bindings/reset/renesas,rst.txt
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.txt
@@ -16,8 +16,11 @@ Required properties:
- "renesas,<soctype>-rst" for R-Car Gen2 and Gen3, and RZ/G
Examples with soctypes are:
- "renesas,r8a7743-rst" (RZ/G1M)
+ - "renesas,r8a7744-rst" (RZ/G1N)
- "renesas,r8a7745-rst" (RZ/G1E)
- "renesas,r8a77470-rst" (RZ/G1C)
+ - "renesas,r8a774a1-rst" (RZ/G2M)
+ - "renesas,r8a774c0-rst" (RZ/G2E)
- "renesas,r8a7778-reset-wdt" (R-Car M1A)
- "renesas,r8a7779-reset-wdt" (R-Car H1)
- "renesas,r8a7790-rst" (R-Car H2)
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index eaca9da79d83..e52e16c6bc57 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -14,6 +14,10 @@ Required properties:
- "renesas,scifa-r8a7743" for R8A7743 (RZ/G1M) SCIFA compatible UART.
- "renesas,scifb-r8a7743" for R8A7743 (RZ/G1M) SCIFB compatible UART.
- "renesas,hscif-r8a7743" for R8A7743 (RZ/G1M) HSCIF compatible UART.
+ - "renesas,scif-r8a7744" for R8A7744 (RZ/G1N) SCIF compatible UART.
+ - "renesas,scifa-r8a7744" for R8A7744 (RZ/G1N) SCIFA compatible UART.
+ - "renesas,scifb-r8a7744" for R8A7744 (RZ/G1N) SCIFB compatible UART.
+ - "renesas,hscif-r8a7744" for R8A7744 (RZ/G1N) HSCIF compatible UART.
- "renesas,scif-r8a7745" for R8A7745 (RZ/G1E) SCIF compatible UART.
- "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART.
- "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART.
@@ -50,6 +54,8 @@ Required properties:
- "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART.
- "renesas,scif-r8a77980" for R8A77980 (R-Car V3H) SCIF compatible UART.
- "renesas,hscif-r8a77980" for R8A77980 (R-Car V3H) HSCIF compatible UART.
+ - "renesas,scif-r8a77990" for R8A77990 (R-Car E3) SCIF compatible UART.
+ - "renesas,hscif-r8a77990" for R8A77990 (R-Car E3) HSCIF compatible UART.
- "renesas,scif-r8a77995" for R8A77995 (R-Car D3) SCIF compatible UART.
- "renesas,hscif-r8a77995" for R8A77995 (R-Car D3) HSCIF compatible UART.
- "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.
diff --git a/Documentation/devicetree/bindings/serial/uniphier-uart.txt b/Documentation/devicetree/bindings/serial/uniphier-uart.txt
index 0b3892a7a528..7a1bf02bb869 100644
--- a/Documentation/devicetree/bindings/serial/uniphier-uart.txt
+++ b/Documentation/devicetree/bindings/serial/uniphier-uart.txt
@@ -7,7 +7,7 @@ Required properties:
- clocks: phandle to the input clock.
Optional properties:
-- fifo-size: the RX/TX FIFO size. Defaults to 64 if not specified.
+-auto-flow-control: enable automatic flow control support.
Example:
aliases {
@@ -19,5 +19,4 @@ Example:
reg = <0x54006800 0x40>;
interrupts = <0 33 4>;
clocks = <&uart_clk>;
- fifo-size = <64>;
};
diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.txt b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.txt
new file mode 100644
index 000000000000..436d2106e80d
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.txt
@@ -0,0 +1,29 @@
+Amlogic Canvas
+================================
+
+A canvas is a collection of metadata that describes a pixel buffer.
+Those metadata include: width, height, phyaddr, wrapping, block mode
+and endianness.
+
+Many IPs within Amlogic SoCs rely on canvas indexes to read/write pixel data
+rather than use the phy addresses directly. For instance, this is the case for
+the video decoders and the display.
+
+Amlogic SoCs have 256 canvas.
+
+Device Tree Bindings:
+---------------------
+
+Video Lookup Table
+--------------------------
+
+Required properties:
+- compatible: "amlogic,canvas"
+- reg: Base physical address and size of the canvas registers.
+
+Example:
+
+canvas: video-lut@48 {
+ compatible = "amlogic,canvas";
+ reg = <0x0 0x48 0x0 0x14>;
+};
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt
index 03c741602c6d..6d2dd8a31482 100644
--- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt
@@ -98,6 +98,12 @@ The property below is dependent on fsl,tdm-interface:
usage: optional for tdm interface
value type: <empty>
Definition : Internal loopback connecting on TDM layer.
+- fsl,hmask
+ usage: optional
+ Value type: <u16>
+ Definition: HDLC address recognition. Set to zero to disable
+ address filtering of packets:
+ fsl,hmask = /bits/ 16 <0x0000>;
Example for tdm interface:
diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
index f9987c30f0d5..5a2ef1726e2a 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
@@ -19,10 +19,12 @@ IP Pairing
Required properties in pwrap device node.
- compatible:
"mediatek,mt2701-pwrap" for MT2701/7623 SoCs
+ "mediatek,mt6765-pwrap" for MT6765 SoCs
"mediatek,mt6797-pwrap" for MT6797 SoCs
"mediatek,mt7622-pwrap" for MT7622 SoCs
"mediatek,mt8135-pwrap" for MT8135 SoCs
"mediatek,mt8173-pwrap" for MT8173 SoCs
+ "mediatek,mt8183-pwrap" for MT8183 SoCs
- interrupts: IRQ for pwrap in SOC
- reg-names: Must include the following entries:
"pwrap": Main registers base
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
index ff92e5a41bed..dab7ca9f250c 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
@@ -53,20 +53,8 @@ Required properties:
- clocks: Serial engine core clock needed by the device.
Qualcomm Technologies Inc. GENI Serial Engine based SPI Controller
-
-Required properties:
-- compatible: Must contain "qcom,geni-spi".
-- reg: Must contain SPI register location and length.
-- interrupts: Must contain SPI controller interrupts.
-- clock-names: Must contain "se".
-- clocks: Serial engine core clock needed by the device.
-- spi-max-frequency: Specifies maximum SPI clock frequency, units - Hz.
-- #address-cells: Must be <1> to define a chip select address on
- the SPI bus.
-- #size-cells: Must be <0>.
-
-SPI slave nodes must be children of the SPI master node and conform to SPI bus
-binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt.
+node binding is described in
+Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt.
Example:
geniqup@8c0000 {
@@ -103,17 +91,4 @@ Example:
pinctrl-1 = <&qup_1_uart_3_sleep>;
};
- spi0: spi@a84000 {
- compatible = "qcom,geni-spi";
- reg = <0xa84000 0x4000>;
- interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "se";
- clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&qup_1_spi_2_active>;
- pinctrl-1 = <&qup_1_spi_2_sleep>;
- spi-max-frequency = <19200000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
}
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt
index 7dc5ce858a0e..46e27cd69f18 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.txt
@@ -13,6 +13,7 @@ On RK3328 SoCs, the GRF adds a section for USB2PHYGRF,
Required Properties:
- compatible: GRF should be one of the following:
+ - "rockchip,px30-grf", "syscon": for px30
- "rockchip,rk3036-grf", "syscon": for rk3036
- "rockchip,rk3066-grf", "syscon": for rk3066
- "rockchip,rk3188-grf", "syscon": for rk3188
@@ -23,6 +24,7 @@ Required Properties:
- "rockchip,rk3399-grf", "syscon": for rk3399
- "rockchip,rv1108-grf", "syscon": for rv1108
- compatible: PMUGRF should be one of the following:
+ - "rockchip,px30-pmugrf", "syscon": for px30
- "rockchip,rk3368-pmugrf", "syscon": for rk3368
- "rockchip,rk3399-pmugrf", "syscon": for rk3399
- compatible: SGRF should be one of the following
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.txt b/Documentation/devicetree/bindings/sound/adi,adau1977.txt
new file mode 100644
index 000000000000..e79aeef73f28
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,adau1977.txt
@@ -0,0 +1,54 @@
+Analog Devices ADAU1977/ADAU1978/ADAU1979
+
+Datasheets:
+http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1977.pdf
+http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1978.pdf
+http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1979.pdf
+
+This driver supports both the I2C and SPI bus.
+
+Required properties:
+ - compatible: Should contain one of the following:
+ "adi,adau1977"
+ "adi,adau1978"
+ "adi,adau1979"
+
+ - AVDD-supply: analog power supply for the device, please consult
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+Optional properties:
+ - reset-gpio: the reset pin for the chip, for more details consult
+ Documentation/devicetree/bindings/gpio/gpio.txt
+
+ - DVDD-supply: supply voltage for the digital core, please consult
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+For required properties on SPI, please consult
+Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Required properties on I2C:
+
+ - reg: The i2c address. Value depends on the state of ADDR0
+ and ADDR1, as wired in hardware.
+
+Examples:
+
+ adau1977_spi: adau1977@0 {
+ compatible = "adi,adau1977";
+ spi-max-frequency = <600000>;
+
+ AVDD-supply = <&regulator>;
+ DVDD-supply = <&regulator_digital>;
+
+ reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ adau1977_i2c: adau1977@11 {
+ compatible = "adi,adau1977";
+ reg = <0x11>;
+
+ AVDD-supply = <&regulator>;
+ DVDD-supply = <&regulator_digital>;
+
+ reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>;
+ };
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
new file mode 100644
index 000000000000..5672d0bc5b16
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
@@ -0,0 +1,24 @@
+* Amlogic Audio PDM input
+
+Required properties:
+- compatible: 'amlogic,axg-pdm'
+- reg: physical base address of the controller and length of memory
+ mapped region.
+- clocks: list of clock phandle, one for each entry clock-names.
+- clock-names: should contain the following:
+ * "pclk" : peripheral clock.
+ * "dclk" : pdm digital clock
+ * "sysclk" : dsp system clock
+- #sound-dai-cells: must be 0.
+
+Example of PDM on the A113 SoC:
+
+pdm: audio-controller@ff632000 {
+ compatible = "amlogic,axg-pdm";
+ reg = <0x0 0xff632000 0x0 0x34>;
+ #sound-dai-cells = <0>;
+ clocks = <&clkc_audio AUD_CLKID_PDM>,
+ <&clkc_audio AUD_CLKID_PDM_DCLK>,
+ <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+ clock-names = "pclk", "dclk", "sysclk";
+};
diff --git a/Documentation/devicetree/bindings/sound/cs42l51.txt b/Documentation/devicetree/bindings/sound/cs42l51.txt
new file mode 100644
index 000000000000..4b5de33ce377
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs42l51.txt
@@ -0,0 +1,17 @@
+CS42L51 audio CODEC
+
+Optional properties:
+
+ - clocks : a list of phandles + clock-specifiers, one for each entry in
+ clock-names
+
+ - clock-names : must contain "MCLK"
+
+Example:
+
+cs42l51: cs42l51@4a {
+ compatible = "cirrus,cs42l51";
+ reg = <0x4a>;
+ clocks = <&mclk_prov>;
+ clock-names = "MCLK";
+};
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98088.txt b/Documentation/devicetree/bindings/sound/maxim,max98088.txt
new file mode 100644
index 000000000000..da764d913319
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/maxim,max98088.txt
@@ -0,0 +1,23 @@
+MAX98088 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible: "maxim,max98088" or "maxim,max98089".
+- reg: The I2C address of the device.
+
+Optional properties:
+
+- clocks: the clock provider of MCLK, see ../clock/clock-bindings.txt section
+ "consumer" for more information.
+- clock-names: must be set to "mclk"
+
+Example:
+
+max98089: codec@10 {
+ compatible = "maxim,max98089";
+ reg = <0x10>;
+ clocks = <&clks IMX6QDL_CLK_CKO2>;
+ clock-names = "mclk";
+};
diff --git a/Documentation/devicetree/bindings/sound/mikroe,mikroe-proto.txt b/Documentation/devicetree/bindings/sound/mikroe,mikroe-proto.txt
new file mode 100644
index 000000000000..912f8fae11c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mikroe,mikroe-proto.txt
@@ -0,0 +1,23 @@
+Mikroe-PROTO audio board
+
+Required properties:
+ - compatible: "mikroe,mikroe-proto"
+ - dai-format: Must be "i2s".
+ - i2s-controller: The phandle of the I2S controller.
+ - audio-codec: The phandle of the WM8731 audio codec.
+Optional properties:
+ - model: The user-visible name of this sound complex.
+ - bitclock-master: Indicates dai-link bit clock master; for details see simple-card.txt (1).
+ - frame-master: Indicates dai-link frame master; for details see simple-card.txt (1).
+
+(1) : There must be the same master for both bit and frame clocks.
+
+Example:
+ sound {
+ compatible = "mikroe,mikroe-proto";
+ model = "wm8731 @ sama5d2_xplained";
+ i2s-controller = <&i2s0>;
+ audio-codec = <&wm8731>;
+ dai-format = "i2s";
+ };
+};
diff --git a/Documentation/devicetree/bindings/sound/nau8822.txt b/Documentation/devicetree/bindings/sound/nau8822.txt
new file mode 100644
index 000000000000..a471d162d4e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nau8822.txt
@@ -0,0 +1,16 @@
+NAU8822 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+ - compatible : "nuvoton,nau8822"
+
+ - reg : the I2C address of the device.
+
+Example:
+
+codec: nau8822@1a {
+ compatible = "nuvoton,nau8822";
+ reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/pcm3060.txt b/Documentation/devicetree/bindings/sound/pcm3060.txt
new file mode 100644
index 000000000000..90fcb8523099
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/pcm3060.txt
@@ -0,0 +1,17 @@
+PCM3060 audio CODEC
+
+This driver supports both I2C and SPI.
+
+Required properties:
+
+- compatible: "ti,pcm3060"
+
+- reg : the I2C address of the device for I2C, the chip select
+ number for SPI.
+
+Examples:
+
+ pcm3060: pcm3060@46 {
+ compatible = "ti,pcm3060";
+ reg = <0x46>;
+ };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
index a8179409c194..d74888b9f1bb 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
@@ -49,7 +49,7 @@ configuration of each dai. Must contain the following properties.
Usage: required for mi2s interface
Value type: <prop-encoded-array>
Definition: Must be list of serial data lines used by this dai.
- should be one or more of the 1-4 sd lines.
+ should be one or more of the 0-3 sd lines.
- qcom,tdm-sync-mode:
Usage: required for tdm interface
@@ -137,42 +137,42 @@ q6afe@4 {
prim-mi2s-rx@16 {
reg = <16>;
- qcom,sd-lines = <1 3>;
+ qcom,sd-lines = <0 2>;
};
prim-mi2s-tx@17 {
reg = <17>;
- qcom,sd-lines = <2>;
+ qcom,sd-lines = <1>;
};
sec-mi2s-rx@18 {
reg = <18>;
- qcom,sd-lines = <1 4>;
+ qcom,sd-lines = <0 3>;
};
sec-mi2s-tx@19 {
reg = <19>;
- qcom,sd-lines = <2>;
+ qcom,sd-lines = <1>;
};
tert-mi2s-rx@20 {
reg = <20>;
- qcom,sd-lines = <2 4>;
+ qcom,sd-lines = <1 3>;
};
tert-mi2s-tx@21 {
reg = <21>;
- qcom,sd-lines = <1>;
+ qcom,sd-lines = <0>;
};
quat-mi2s-rx@22 {
reg = <22>;
- qcom,sd-lines = <1>;
+ qcom,sd-lines = <0>;
};
quat-mi2s-tx@23 {
reg = <23>;
- qcom,sd-lines = <2>;
+ qcom,sd-lines = <1>;
};
};
};
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index 9e764270c36b..d92b705e7917 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -340,10 +340,12 @@ Required properties:
- compatible : "renesas,rcar_sound-<soctype>", fallbacks
"renesas,rcar_sound-gen1" if generation1, and
"renesas,rcar_sound-gen2" if generation2 (or RZ/G1)
- "renesas,rcar_sound-gen3" if generation3
+ "renesas,rcar_sound-gen3" if generation3 (or RZ/G2)
Examples with soctypes are:
- "renesas,rcar_sound-r8a7743" (RZ/G1M)
+ - "renesas,rcar_sound-r8a7744" (RZ/G1N)
- "renesas,rcar_sound-r8a7745" (RZ/G1E)
+ - "renesas,rcar_sound-r8a774a1" (RZ/G2M)
- "renesas,rcar_sound-r8a7778" (R-Car M1A)
- "renesas,rcar_sound-r8a7779" (R-Car H1)
- "renesas,rcar_sound-r8a7790" (R-Car H2)
@@ -353,6 +355,7 @@ Required properties:
- "renesas,rcar_sound-r8a7795" (R-Car H3)
- "renesas,rcar_sound-r8a7796" (R-Car M3-W)
- "renesas,rcar_sound-r8a77965" (R-Car M3-N)
+ - "renesas,rcar_sound-r8a77990" (R-Car E3)
- reg : Should contain the register physical address.
required register is
SRU/ADG/SSI if generation1
diff --git a/Documentation/devicetree/bindings/sound/st,sta32x.txt b/Documentation/devicetree/bindings/sound/st,sta32x.txt
index 255de3ae5b2f..52265fb757c5 100644
--- a/Documentation/devicetree/bindings/sound/st,sta32x.txt
+++ b/Documentation/devicetree/bindings/sound/st,sta32x.txt
@@ -19,6 +19,10 @@ Required properties:
Optional properties:
+ - clocks, clock-names: Clock specifier for XTI input clock.
+ If specified, the clock will be enabled when the codec is probed,
+ and disabled when it is removed. The 'clock-names' must be set to 'xti'.
+
- st,output-conf: number, Selects the output configuration:
0: 2-channel (full-bridge) power, 2-channel data-out
1: 2 (half-bridge). 1 (full-bridge) on-board power
@@ -39,6 +43,9 @@ Optional properties:
- st,thermal-warning-recover:
If present, thermal warning recovery is enabled.
+ - st,fault-detect-recovery:
+ If present, fault detect recovery is enabled.
+
- st,thermal-warning-adjustment:
If present, thermal warning adjustment is enabled.
@@ -76,6 +83,8 @@ Example:
codec: sta32x@38 {
compatible = "st,sta32x";
reg = <0x1c>;
+ clocks = <&clock>;
+ clock-names = "xti";
reset-gpios = <&gpio1 19 0>;
power-down-gpios = <&gpio1 16 0>;
st,output-conf = /bits/ 8 <0x3>; // set output to 2-channel
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
index 3a3fc506e43a..3f4467ff0aa2 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
@@ -31,7 +31,11 @@ SAI subnodes required properties:
- reg: Base address and size of SAI sub-block register set.
- clocks: Must contain one phandle and clock specifier pair
for sai_ck which feeds the internal clock generator.
+ If the SAI shares a master clock, with another SAI set as MCLK
+ clock provider, SAI provider phandle must be specified here.
- clock-names: Must contain "sai_ck".
+ Must also contain "MCLK", if SAI shares a master clock,
+ with a SAI set as MCLK clock provider.
- dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt
- dma-names: identifier string for each DMA request line
"tx": if sai sub-block is configured as playback DAI
@@ -51,6 +55,9 @@ SAI subnodes Optional properties:
configured according to protocol defined in related DAI link node,
such as i2s, left justified, right justified, dsp and pdm protocols.
Note: ac97 protocol is not supported by SAI driver
+ - #clock-cells: should be 0. This property must be present if the SAI device
+ is a master clock provider, according to clocks bindings, described in
+ Documentation/devicetree/bindings/clock/clock-bindings.txt.
The device node should contain one 'port' child node with one child 'endpoint'
node, according to the bindings defined in Documentation/devicetree/bindings/
diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
index b9d50d6cdef3..61e71c1729e0 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
@@ -10,6 +10,7 @@ Required properties:
- "allwinner,sun6i-a31-i2s"
- "allwinner,sun8i-a83t-i2s"
- "allwinner,sun8i-h3-i2s"
+ - "allwinner,sun50i-a64-codec-i2s"
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: should contain the I2S interrupt.
@@ -26,6 +27,7 @@ Required properties for the following compatibles:
- "allwinner,sun6i-a31-i2s"
- "allwinner,sun8i-a83t-i2s"
- "allwinner,sun8i-h3-i2s"
+ - "allwinner,sun50i-a64-codec-i2s"
- resets: phandle to the reset line for this codec
Example:
diff --git a/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt b/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt
new file mode 100644
index 000000000000..4f8ad0e04d20
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt
@@ -0,0 +1,12 @@
+* Allwinner A64 Codec Analog Controls
+
+Required properties:
+- compatible: must be one of the following compatibles:
+ - "allwinner,sun50i-a64-codec-analog"
+- reg: must contain the registers location and length
+
+Example:
+ codec_analog: codec-analog@1f015c0 {
+ compatible = "allwinner,sun50i-a64-codec-analog";
+ reg = <0x01f015c0 0x4>;
+ };
diff --git a/Documentation/devicetree/bindings/sound/ts3a227e.txt b/Documentation/devicetree/bindings/sound/ts3a227e.txt
index 3ed8359144d3..21ab45bc7e8f 100644
--- a/Documentation/devicetree/bindings/sound/ts3a227e.txt
+++ b/Documentation/devicetree/bindings/sound/ts3a227e.txt
@@ -14,7 +14,7 @@ Required properties:
Optional properies:
- ti,micbias: Intended MICBIAS voltage (datasheet section 9.6.7).
- Select 0/1/2/3/4/5/6/7 to specify MACBIAS voltage
+ Select 0/1/2/3/4/5/6/7 to specify MICBIAS voltage
2.1V/2.2V/2.3V/2.4V/2.5V/2.6V/2.7V/2.8V
Default value is "1" (2.2V).
diff --git a/Documentation/devicetree/bindings/sound/wm8782.txt b/Documentation/devicetree/bindings/sound/wm8782.txt
new file mode 100644
index 000000000000..256cdec6ec4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8782.txt
@@ -0,0 +1,17 @@
+WM8782 stereo ADC
+
+This device does not have any control interface or reset pins.
+
+Required properties:
+
+ - compatible : "wlf,wm8782"
+ - Vdda-supply : phandle to a regulator for the analog power supply (2.7V - 5.5V)
+ - Vdd-supply : phandle to a regulator for the digital power supply (2.7V - 3.6V)
+
+Example:
+
+wm8782: stereo-adc {
+ compatible = "wlf,wm8782";
+ Vdda-supply = <&vdda_supply>;
+ Vdd-supply = <&vdd_supply>;
+};
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
new file mode 100644
index 000000000000..790311a42bf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
@@ -0,0 +1,39 @@
+GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
+
+The QUP v3 core is a GENI based AHB slave that provides a common data path
+(an output FIFO and an input FIFO) for serial peripheral interface (SPI)
+mini-core.
+
+SPI in master mode supports up to 50MHz, up to four chip selects, programmable
+data path from 4 bits to 32 bits and numerous protocol variants.
+
+Required properties:
+- compatible: Must contain "qcom,geni-spi".
+- reg: Must contain SPI register location and length.
+- interrupts: Must contain SPI controller interrupts.
+- clock-names: Must contain "se".
+- clocks: Serial engine core clock needed by the device.
+- #address-cells: Must be <1> to define a chip select address on
+ the SPI bus.
+- #size-cells: Must be <0>.
+
+SPI Controller nodes must be child of GENI based Qualcomm Universal
+Peripharal. Please refer GENI based QUP wrapper controller node bindings
+described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt.
+
+SPI slave nodes must be children of the SPI master node and conform to SPI bus
+binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt.
+
+Example:
+ spi0: spi@a84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0xa84000 0x4000>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "se";
+ clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qup_1_spi_2_active>;
+ pinctrl-1 = <&qup_1_spi_2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
new file mode 100644
index 000000000000..1d64b61f5171
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
@@ -0,0 +1,36 @@
+Qualcomm Quad Serial Peripheral Interface (QSPI)
+
+The QSPI controller allows SPI protocol communication in single, dual, or quad
+wire transmission modes for read/write access to slaves such as NOR flash.
+
+Required properties:
+- compatible: An SoC specific identifier followed by "qcom,qspi-v1", such as
+ "qcom,sdm845-qspi", "qcom,qspi-v1"
+- reg: Should contain the base register location and length.
+- interrupts: Interrupt number used by the controller.
+- clocks: Should contain the core and AHB clock.
+- clock-names: Should be "core" for core clock and "iface" for AHB clock.
+
+SPI slave nodes must be children of the SPI master node and can contain
+properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+
+ qspi: spi@88df000 {
+ compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
+ reg = <0x88df000 0x600>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "iface", "core";
+ clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+ <&gcc GCC_QSPI_CORE_CLK>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt
index bfbc2035fb6b..4b836ad17b19 100644
--- a/Documentation/devicetree/bindings/spi/sh-msiof.txt
+++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt
@@ -2,7 +2,9 @@ Renesas MSIOF spi controller
Required properties:
- compatible : "renesas,msiof-r8a7743" (RZ/G1M)
+ "renesas,msiof-r8a7744" (RZ/G1N)
"renesas,msiof-r8a7745" (RZ/G1E)
+ "renesas,msiof-r8a774a1" (RZ/G2M)
"renesas,msiof-r8a7790" (R-Car H2)
"renesas,msiof-r8a7791" (R-Car M2-W)
"renesas,msiof-r8a7792" (R-Car V2H)
@@ -11,10 +13,14 @@ Required properties:
"renesas,msiof-r8a7795" (R-Car H3)
"renesas,msiof-r8a7796" (R-Car M3-W)
"renesas,msiof-r8a77965" (R-Car M3-N)
+ "renesas,msiof-r8a77970" (R-Car V3M)
+ "renesas,msiof-r8a77980" (R-Car V3H)
+ "renesas,msiof-r8a77990" (R-Car E3)
+ "renesas,msiof-r8a77995" (R-Car D3)
"renesas,msiof-sh73a0" (SH-Mobile AG5)
"renesas,sh-mobile-msiof" (generic SH-Mobile compatibile device)
"renesas,rcar-gen2-msiof" (generic R-Car Gen2 and RZ/G1 compatible device)
- "renesas,rcar-gen3-msiof" (generic R-Car Gen3 compatible device)
+ "renesas,rcar-gen3-msiof" (generic R-Car Gen3 and RZ/G2 compatible device)
"renesas,sh-msiof" (deprecated)
When compatible with the generic version, nodes
diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
index 642d3fb1ef85..2864bc6b659c 100644
--- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
@@ -2,7 +2,7 @@ Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface.
Required properties:
- compatible : "snps,dw-apb-ssi" or "mscc,<soc>-spi", where soc is "ocelot" or
- "jaguar2"
+ "jaguar2", or "amazon,alpine-dw-apb-ssi"
- reg : The register base for the controller. For "mscc,<soc>-spi", a second
register set is required (named ICPU_CFG:SPI_MST)
- interrupts : One interrupt, used by the controller.
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
index 4af132606b37..8d178a4503cf 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
@@ -3,6 +3,7 @@
Required properties:
- compatible :
- "fsl,imx7ulp-spi" for LPSPI compatible with the one integrated on i.MX7ULP soc
+ - "fsl,imx8qxp-spi" for LPSPI compatible with the one integrated on i.MX8QXP soc
- reg : address and length of the lpspi master registers
- interrupts : lpspi interrupt
- clocks : lpspi clock specifier
diff --git a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
new file mode 100644
index 000000000000..0335a9bd2e8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
@@ -0,0 +1,24 @@
+PXA2xx SSP SPI Controller
+
+Required properties:
+- compatible: Must be "marvell,mmp2-ssp".
+- reg: Offset and length of the device's register set.
+- interrupts: Should be the interrupt number.
+- clocks: Should contain a single entry describing the clock input.
+- #address-cells: Number of cells required to define a chip select address.
+- #size-cells: Should be zero.
+
+Optional properties:
+- cs-gpios: list of GPIO chip selects. See the SPI bus bindings,
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Child nodes represent devices on the SPI bus
+ See ../spi/spi-bus.txt
+
+Example:
+ ssp1: spi@d4035000 {
+ compatible = "marvell,mmp2-ssp";
+ reg = <0xd4035000 0x1000>;
+ clocks = <&soc_clocks MMP2_CLK_SSP0>;
+ interrupts = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt
index 96fd58548f69..fc97ad64fbf2 100644
--- a/Documentation/devicetree/bindings/spi/spi-rspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-rspi.txt
@@ -3,7 +3,7 @@ Device tree configuration for Renesas RSPI/QSPI driver
Required properties:
- compatible : For Renesas Serial Peripheral Interface on legacy SH:
"renesas,rspi-<soctype>", "renesas,rspi" as fallback.
- For Renesas Serial Peripheral Interface on RZ/A1H:
+ For Renesas Serial Peripheral Interface on RZ/A:
"renesas,rspi-<soctype>", "renesas,rspi-rz" as fallback.
For Quad Serial Peripheral Interface on R-Car Gen2 and
RZ/G1 devices:
@@ -11,7 +11,9 @@ Required properties:
Examples with soctypes are:
- "renesas,rspi-sh7757" (SH)
- "renesas,rspi-r7s72100" (RZ/A1H)
+ - "renesas,rspi-r7s9210" (RZ/A2)
- "renesas,qspi-r8a7743" (RZ/G1M)
+ - "renesas,qspi-r8a7744" (RZ/G1N)
- "renesas,qspi-r8a7745" (RZ/G1E)
- "renesas,qspi-r8a7790" (R-Car H2)
- "renesas,qspi-r8a7791" (R-Car M2-W)
diff --git a/Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt b/Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt
new file mode 100644
index 000000000000..c37e5a179b21
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt
@@ -0,0 +1,32 @@
+Binding for MTK SPI Slave controller
+
+Required properties:
+- compatible: should be one of the following.
+ - mediatek,mt2712-spi-slave: for mt2712 platforms
+- reg: Address and length of the register set for the device.
+- interrupts: Should contain spi interrupt.
+- clocks: phandles to input clocks.
+ It's clock gate, and should be <&infracfg CLK_INFRA_AO_SPI1>.
+- clock-names: should be "spi" for the clock gate.
+
+Optional properties:
+- assigned-clocks: it's mux clock, should be <&topckgen CLK_TOP_SPISLV_SEL>.
+- assigned-clock-parents: parent of mux clock.
+ It's PLL, and should be one of the following.
+ - <&topckgen CLK_TOP_UNIVPLL1_D2>: specify parent clock 312MHZ.
+ It's the default one.
+ - <&topckgen CLK_TOP_UNIVPLL1_D4>: specify parent clock 156MHZ.
+ - <&topckgen CLK_TOP_UNIVPLL2_D4>: specify parent clock 104MHZ.
+ - <&topckgen CLK_TOP_UNIVPLL1_D8>: specify parent clock 78MHZ.
+
+Example:
+- SoC Specific Portion:
+spis1: spi@10013000 {
+ compatible = "mediatek,mt2712-spi-slave";
+ reg = <0 0x10013000 0 0x100>;
+ interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_AO_SPI1>;
+ clock-names = "spi";
+ assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-sprd.txt b/Documentation/devicetree/bindings/spi/spi-sprd.txt
new file mode 100644
index 000000000000..bad211a19da4
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-sprd.txt
@@ -0,0 +1,26 @@
+Spreadtrum SPI Controller
+
+Required properties:
+- compatible: Should be "sprd,sc9860-spi".
+- reg: Offset and length of SPI controller register space.
+- interrupts: Should contain SPI interrupt.
+- clock-names: Should contain following entries:
+ "spi" for SPI clock,
+ "source" for SPI source (parent) clock,
+ "enable" for SPI module enable clock.
+- clocks: List of clock input name strings sorted in the same order
+ as the clock-names property.
+- #address-cells: The number of cells required to define a chip select
+ address on the SPI bus. Should be set to 1.
+- #size-cells: Should be set to 0.
+
+Example:
+spi0: spi@70a00000{
+ compatible = "sprd,sc9860-spi";
+ reg = <0 0x70a00000 0 0x1000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "spi", "source","enable";
+ clocks = <&clk_spi0>, <&ext_26m>, <&clk_ap_apb_gates 5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt b/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt
new file mode 100644
index 000000000000..adeeb63e84b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt
@@ -0,0 +1,44 @@
+* STMicroelectronics Quad Serial Peripheral Interface(QSPI)
+
+Required properties:
+- compatible: should be "st,stm32f469-qspi"
+- reg: the first contains the register location and length.
+ the second contains the memory mapping address and length
+- reg-names: should contain the reg names "qspi" "qspi_mm"
+- interrupts: should contain the interrupt for the device
+- clocks: the phandle of the clock needed by the QSPI controller
+- A pinctrl must be defined to set pins in mode of operation for QSPI transfer
+
+Optional properties:
+- resets: must contain the phandle to the reset controller.
+
+A spi flash (NOR/NAND) must be a child of spi node and could have some
+properties. Also see jedec,spi-nor.txt.
+
+Required properties:
+- reg: chip-Select number (QSPI controller may connect 2 flashes)
+- spi-max-frequency: max frequency of spi bus
+
+Optional property:
+- spi-rx-bus-width: see ./spi-bus.txt for the description
+
+Example:
+
+qspi: spi@a0001000 {
+ compatible = "st,stm32f469-qspi";
+ reg = <0xa0001000 0x1000>, <0x90000000 0x10000000>;
+ reg-names = "qspi", "qspi_mm";
+ interrupts = <91>;
+ resets = <&rcc STM32F4_AHB3_RESET(QSPI)>;
+ clocks = <&rcc 0 STM32F4_AHB3_CLOCK(QSPI)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi0>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>;
+ ...
+ };
+};
diff --git a/Documentation/devicetree/bindings/sram/sunxi-sram.txt b/Documentation/devicetree/bindings/sram/sunxi-sram.txt
index c51ade86578c..62dd0748f0ef 100644
--- a/Documentation/devicetree/bindings/sram/sunxi-sram.txt
+++ b/Documentation/devicetree/bindings/sram/sunxi-sram.txt
@@ -18,6 +18,7 @@ Required properties:
- "allwinner,sun8i-h3-system-control"
- "allwinner,sun50i-a64-sram-controller" (deprecated)
- "allwinner,sun50i-a64-system-control"
+ - "allwinner,sun50i-h6-system-control", "allwinner,sun50i-a64-system-control"
- reg : sram controller register offset + length
SRAM nodes
@@ -54,6 +55,9 @@ The valid sections compatible for H3 are:
The valid sections compatible for A64 are:
- allwinner,sun50i-a64-sram-c
+The valid sections compatible for H6 are:
+ - allwinner,sun50i-h6-sram-c, allwinner,sun50i-a64-sram-c
+
Devices using SRAM sections
---------------------------
diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
index 290ec06fa33a..0273a92a2a84 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
@@ -6,8 +6,7 @@ interrupt signal and status register to identify high PMIC die temperature.
Required properties:
- compatible: Should contain "qcom,spmi-temp-alarm".
-- reg: Specifies the SPMI address and length of the controller's
- registers.
+- reg: Specifies the SPMI address.
- interrupts: PMIC temperature alarm interrupt.
- #thermal-sensor-cells: Should be 0. See thermal.txt for a description.
@@ -20,7 +19,7 @@ Example:
pm8941_temp: thermal-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
- reg = <0x2400 0x100>;
+ reg = <0x2400>;
interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
#thermal-sensor-cells = <0>;
@@ -36,19 +35,14 @@ Example:
thermal-sensors = <&pm8941_temp>;
trips {
- passive {
- temperature = <1050000>;
+ stage1 {
+ temperature = <105000>;
hysteresis = <2000>;
type = "passive";
};
- alert {
+ stage2 {
temperature = <125000>;
hysteresis = <2000>;
- type = "hot";
- };
- crit {
- temperature = <145000>;
- hysteresis = <2000>;
type = "critical";
};
};
diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
index 20ca4ef9d776..04cbb90a5d3e 100644
--- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
@@ -1,9 +1,9 @@
* Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
Required properties:
-- compatible : Must include "fsl,qoriq-tmu". The version of the device is
- determined by the TMU IP Block Revision Register (IPBRR0) at
- offset 0x0BF8.
+- compatible : Must include "fsl,qoriq-tmu" or "fsl,imx8mq-tmu". The
+ version of the device is determined by the TMU IP Block Revision
+ Register (IPBRR0) at offset 0x0BF8.
Table of correspondences between IPBRR0 values and example chips:
Value Device
---------- -----
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
index cfa154bb0fa7..ad9a435afef4 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
@@ -7,9 +7,11 @@ inside the LSI.
Required properties:
- compatible : "renesas,<soctype>-thermal",
Examples with soctypes are:
+ - "renesas,r8a774a1-thermal" (RZ/G2M)
- "renesas,r8a7795-thermal" (R-Car H3)
- "renesas,r8a7796-thermal" (R-Car M3-W)
- "renesas,r8a77965-thermal" (R-Car M3-N)
+ - "renesas,r8a77980-thermal" (R-Car V3H)
- reg : Address ranges of the thermal registers. Each sensor
needs one address range. Sorting must be done in
increasing order according to datasheet, i.e.
@@ -19,7 +21,8 @@ Required properties:
Optional properties:
-- interrupts : interrupts routed to the TSC (3 for H3, M3-W and M3-N)
+- interrupts : interrupts routed to the TSC (3 for H3, M3-W, M3-N,
+ and V3H)
- power-domain : Must contain a reference to the power domain. This
property is mandatory if the thermal sensor instance
is part of a controllable power domain.
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
index 67c563f1b4c4..73e1613d2cb0 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
@@ -4,15 +4,17 @@ Required properties:
- compatible : "renesas,thermal-<soctype>",
"renesas,rcar-gen2-thermal" (with thermal-zone) or
"renesas,rcar-thermal" (without thermal-zone) as
- fallback except R-Car D3.
+ fallback except R-Car V3M/D3.
Examples with soctypes are:
- "renesas,thermal-r8a73a4" (R-Mobile APE6)
- "renesas,thermal-r8a7743" (RZ/G1M)
+ - "renesas,thermal-r8a7744" (RZ/G1N)
- "renesas,thermal-r8a7779" (R-Car H1)
- "renesas,thermal-r8a7790" (R-Car H2)
- "renesas,thermal-r8a7791" (R-Car M2-W)
- "renesas,thermal-r8a7792" (R-Car V2H)
- "renesas,thermal-r8a7793" (R-Car M2-N)
+ - "renesas,thermal-r8a77970" (R-Car V3M)
- "renesas,thermal-r8a77995" (R-Car D3)
- reg : Address range of the thermal registers.
The 1st reg will be recognized as common register
@@ -21,7 +23,7 @@ Required properties:
Option properties:
- interrupts : If present should contain 3 interrupts for
- R-Car D3 or 1 interrupt otherwise.
+ R-Car V3M/D3 or 1 interrupt otherwise.
Example (non interrupt support):
diff --git a/Documentation/devicetree/bindings/thermal/stm32-thermal.txt b/Documentation/devicetree/bindings/thermal/stm32-thermal.txt
new file mode 100644
index 000000000000..8c0d5a4d8031
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/stm32-thermal.txt
@@ -0,0 +1,61 @@
+Binding for Thermal Sensor for STMicroelectronics STM32 series of SoCs.
+
+On STM32 SoCs, the Digital Temperature Sensor (DTS) is in charge of managing an
+analog block which delivers a frequency depending on the internal SoC's
+temperature. By using a reference frequency, DTS is able to provide a sample
+number which can be translated into a temperature by the user.
+
+DTS provides interrupt notification mechanism by threshold. This mechanism
+offers two temperature trip points: passive and critical. The first is intended
+for passive cooling notification while the second is used for over-temperature
+reset.
+
+Required parameters:
+-------------------
+
+compatible: Should be "st,stm32-thermal"
+reg: This should be the physical base address and length of the
+ sensor's registers.
+clocks: Phandle of the clock used by the thermal sensor.
+ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+clock-names: Should be "pclk" for register access clock and reference clock.
+ See: Documentation/devicetree/bindings/resource-names.txt
+#thermal-sensor-cells: Should be 0. See ./thermal.txt for a description.
+interrupts: Standard way to define interrupt number.
+
+Example:
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&thermal>;
+
+ trips {
+ cpu_alert1: cpu-alert1 {
+ temperature = <85000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ cpu-crit: cpu-crit {
+ temperature = <120000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ };
+ };
+ };
+
+ thermal: thermal@50028000 {
+ compatible = "st,stm32-thermal";
+ reg = <0x50028000 0x100>;
+ clocks = <&rcc TMPSENS>;
+ clock-names = "pclk";
+ #thermal-sensor-cells = <0>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt
index eb7ee91556a5..ca14ba959e0d 100644
--- a/Documentation/devicetree/bindings/thermal/thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/thermal.txt
@@ -152,7 +152,7 @@ Optional property:
Elem size: one cell the sensors listed in the thermal-sensors property.
Elem type: signed Coefficients defaults to 1, in case this property
is not specified. A simple linear polynomial is used:
- Z = c0 * x0 + c1 + x1 + ... + c(n-1) * x(n-1) + cn.
+ Z = c0 * x0 + c1 * x1 + ... + c(n-1) * x(n-1) + cn.
The coefficients are ordered and they match with sensors
by means of sensor ID. Additional coefficients are
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
index b40add2d9bb4..33992679a8bd 100644
--- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
@@ -24,6 +24,8 @@ Required Properties:
- "renesas,r8a73a4-cmt1" for the 48-bit CMT1 device included in r8a73a4.
- "renesas,r8a7743-cmt0" for the 32-bit CMT0 device included in r8a7743.
- "renesas,r8a7743-cmt1" for the 48-bit CMT1 device included in r8a7743.
+ - "renesas,r8a7744-cmt0" for the 32-bit CMT0 device included in r8a7744.
+ - "renesas,r8a7744-cmt1" for the 48-bit CMT1 device included in r8a7744.
- "renesas,r8a7745-cmt0" for the 32-bit CMT0 device included in r8a7745.
- "renesas,r8a7745-cmt1" for the 48-bit CMT1 device included in r8a7745.
- "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790.
@@ -34,6 +36,10 @@ Required Properties:
- "renesas,r8a7793-cmt1" for the 48-bit CMT1 device included in r8a7793.
- "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794.
- "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794.
+ - "renesas,r8a77970-cmt0" for the 32-bit CMT0 device included in r8a77970.
+ - "renesas,r8a77970-cmt1" for the 48-bit CMT1 device included in r8a77970.
+ - "renesas,r8a77980-cmt0" for the 32-bit CMT0 device included in r8a77980.
+ - "renesas,r8a77980-cmt1" for the 48-bit CMT1 device included in r8a77980.
- "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2
and RZ/G1.
@@ -41,6 +47,9 @@ Required Properties:
and RZ/G1.
These are fallbacks for r8a73a4, R-Car Gen2 and RZ/G1 entries
listed above.
+ - "renesas,rcar-gen3-cmt0" for 32-bit CMT0 devices included in R-Car Gen3.
+ - "renesas,rcar-gen3-cmt1" for 48-bit CMT1 devices included in R-Car Gen3.
+ These are fallbacks for R-Car Gen3 entries listed above.
- reg: base address and length of the registers block for the timer module.
- interrupts: interrupt-specifier for the timer, one per channel.
diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.txt b/Documentation/devicetree/bindings/timer/renesas,ostm.txt
index be3ae0fdf775..81a78f8bcf17 100644
--- a/Documentation/devicetree/bindings/timer/renesas,ostm.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,ostm.txt
@@ -9,7 +9,8 @@ Channels are independent from each other.
Required Properties:
- compatible: must be one or more of the following:
- - "renesas,r7s72100-ostm" for the r7s72100 OSTM
+ - "renesas,r7s72100-ostm" for the R7S72100 (RZ/A1) OSTM
+ - "renesas,r7s9210-ostm" for the R7S9210 (RZ/A2) OSTM
- "renesas,ostm" for any OSTM
This is a fallback for the above renesas,*-ostm entries
diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
index cd5f20bf2582..4ddff85837da 100644
--- a/Documentation/devicetree/bindings/timer/renesas,tmu.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
@@ -12,6 +12,8 @@ Required Properties:
- "renesas,tmu-r8a7740" for the r8a7740 TMU
- "renesas,tmu-r8a7778" for the r8a7778 TMU
- "renesas,tmu-r8a7779" for the r8a7779 TMU
+ - "renesas,tmu-r8a77970" for the r8a77970 TMU
+ - "renesas,tmu-r8a77980" for the r8a77980 TMU
- "renesas,tmu" for any TMU.
This is a fallback for the above renesas,tmu-* entries
diff --git a/Documentation/devicetree/bindings/trivial-devices.txt b/Documentation/devicetree/bindings/trivial-devices.txt
index 763a2808a95c..6ab001fa1ed4 100644
--- a/Documentation/devicetree/bindings/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/trivial-devices.txt
@@ -21,21 +21,10 @@ adi,adt7490 +/-1C TDM Extended Temp Range I.C
adi,adxl345 Three-Axis Digital Accelerometer
adi,adxl346 Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too)
ams,iaq-core AMS iAQ-Core VOC Sensor
-amstaos,tsl2571 AMS/TAOS ALS and proximity sensor
-amstaos,tsl2671 AMS/TAOS ALS and proximity sensor
-amstaos,tmd2671 AMS/TAOS ALS and proximity sensor
-amstaos,tsl2771 AMS/TAOS ALS and proximity sensor
-amstaos,tmd2771 AMS/TAOS ALS and proximity sensor
-amstaos,tsl2572 AMS/TAOS ALS and proximity sensor
-amstaos,tsl2672 AMS/TAOS ALS and proximity sensor
-amstaos,tmd2672 AMS/TAOS ALS and proximity sensor
-amstaos,tsl2772 AMS/TAOS ALS and proximity sensor
-amstaos,tmd2772 AMS/TAOS ALS and proximity sensor
at,24c08 i2c serial eeprom (24cxx)
atmel,at97sc3204t i2c trusted platform module (TPM)
capella,cm32181 CM32181: Ambient Light Sensor
capella,cm3232 CM3232: Ambient Light Sensor
-cirrus,cs42l51 Cirrus Logic CS42L51 audio codec
dallas,ds1374 I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output
dallas,ds1631 High-Precision Digital Thermometer
dallas,ds1672 Dallas DS1672 Real-time Clock
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index 2e9318151df7..529e51879fb2 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -80,6 +80,8 @@ Optional properties:
controller. It's expected that a mux state of 0 indicates device mode and a
mux state of 1 indicates host mode.
- mux-control-names: Shall be "usb_switch" if mux-controls is specified.
+- pinctrl-names: Names for optional pin modes in "default", "host", "device"
+- pinctrl-n: alternate pin modes
i.mx specific properties
- fsl,usbmisc: phandler of non-core register device, with one
diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index 46da5f184460..6dc3c4a34483 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -6,6 +6,7 @@ Required properties:
- brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC.
- hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC.
- rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc;
+ - "rockchip,px30-usb", "rockchip,rk3066-usb", "snps,dwc2": for px30 Soc;
- "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc;
- "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
- "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 3e4c38b806ac..636630fb92d7 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -19,6 +19,7 @@ Exception for clocks:
"cavium,octeon-7130-usb-uctl"
"qcom,dwc3"
"samsung,exynos5250-dwusb3"
+ "samsung,exynos5433-dwusb3"
"samsung,exynos7-dwusb3"
"sprd,sc9860-dwc3"
"st,stih407-dwc3"
diff --git a/Documentation/devicetree/bindings/usb/ehci-mv.txt b/Documentation/devicetree/bindings/usb/ehci-mv.txt
new file mode 100644
index 000000000000..335589895763
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ehci-mv.txt
@@ -0,0 +1,23 @@
+* Marvell PXA/MMP EHCI controller.
+
+Required properties:
+
+- compatible: must be "marvell,pxau2o-ehci"
+- reg: physical base addresses of the controller and length of memory mapped region
+- interrupts: one EHCI controller interrupt should be described here
+- clocks: phandle list of usb clocks
+- clock-names: should be "USBCLK"
+- phys: phandle for the PHY device
+- phy-names: should be "usb"
+
+Example:
+
+ ehci0: usb-ehci@d4208000 {
+ compatible = "marvell,pxau2o-ehci";
+ reg = <0xd4208000 0x200>;
+ interrupts = <44>;
+ clocks = <&soc_clocks MMP2_CLK_USB>;
+ clock-names = "USBCLK";
+ phys = <&usb_otg_phy>;
+ phy-names = "usb";
+ };
diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt
index c97374315049..b7111f43fa59 100644
--- a/Documentation/devicetree/bindings/usb/exynos-usb.txt
+++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt
@@ -83,6 +83,8 @@ Required properties:
- compatible: should be one of the following -
"samsung,exynos5250-dwusb3": for USB 3.0 DWC3 controller on
Exynos5250/5420.
+ "samsung,exynos5433-dwusb3": for USB 3.0 DWC3 controller on
+ Exynos5433.
"samsung,exynos7-dwusb3": for USB 3.0 DWC3 controller on Exynos7.
- #address-cells, #size-cells : should be '1' if the device has sub-nodes
with 'reg' property.
diff --git a/Documentation/devicetree/bindings/usb/faraday,fotg210.txt b/Documentation/devicetree/bindings/usb/faraday,fotg210.txt
new file mode 100644
index 000000000000..06a2286e2054
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/faraday,fotg210.txt
@@ -0,0 +1,35 @@
+Faraday FOTG Host controller
+
+This OTG-capable USB host controller is found in Cortina Systems
+Gemini and other SoC products.
+
+Required properties:
+- compatible: should be one of:
+ "faraday,fotg210"
+ "cortina,gemini-usb", "faraday,fotg210"
+- reg: should contain one register range i.e. start and length
+- interrupts: description of the interrupt line
+
+Optional properties:
+- clocks: should contain the IP block clock
+- clock-names: should be "PCLK" for the IP block clock
+
+Required properties for "cortina,gemini-usb" compatible:
+- syscon: a phandle to the system controller to access PHY registers
+
+Optional properties for "cortina,gemini-usb" compatible:
+- cortina,gemini-mini-b: boolean property that indicates that a Mini-B
+ OTG connector is in use
+- wakeup-source: see power/wakeup-source.txt
+
+Example for Gemini:
+
+usb@68000000 {
+ compatible = "cortina,gemini-usb", "faraday,fotg210";
+ reg = <0x68000000 0x1000>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cc 12>;
+ clock-names = "PCLK";
+ syscon = <&syscon>;
+ wakeup-source;
+};
diff --git a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
index 6087dc7f209e..a5d011d2efc8 100644
--- a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
+++ b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
@@ -5,10 +5,19 @@ Required properties :
- reg : I2C slave address
- interrupts : Interrupt specifier
-Optional properties :
-- fcs,operating-sink-microwatt :
- Minimum amount of power accepted from a sink
- when negotiating
+Required sub-node:
+- connector : The "usb-c-connector" attached to the FUSB302 IC. The bindings
+ of the connector node are specified in:
+
+ Documentation/devicetree/bindings/connector/usb-connector.txt
+
+Deprecated properties :
+- fcs,max-sink-microvolt : Maximum sink voltage accepted by port controller
+- fcs,max-sink-microamp : Maximum sink current accepted by port controller
+- fcs,max-sink-microwatt : Maximum sink power accepted by port controller
+- fcs,operating-sink-microwatt : Minimum amount of power accepted from a sink
+ when negotiating
+
Example:
@@ -17,7 +26,16 @@ fusb302: typec-portc@54 {
reg = <0x54>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- fcs,max-sink-microvolt = <12000000>;
- fcs,max-sink-microamp = <3000000>;
- fcs,max-sink-microwatt = <36000000>;
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ power-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+ PDO_VAR(3000, 12000, 3000)
+ PDO_PPS_APDO(3000, 11000, 3000)>;
+ op-sink-microwatt = <10000000>;
+ };
};
diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
index 2c071bb5801e..d366555166d0 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
@@ -2,11 +2,13 @@ Renesas Electronics USB3.0 Peripheral driver
Required properties:
- compatible: Must contain one of the following:
+ - "renesas,r8a774a1-usb3-peri"
- "renesas,r8a7795-usb3-peri"
- "renesas,r8a7796-usb3-peri"
- "renesas,r8a77965-usb3-peri"
- - "renesas,rcar-gen3-usb3-peri" for a generic R-Car Gen3 compatible
- device
+ - "renesas,r8a77990-usb3-peri"
+ - "renesas,rcar-gen3-usb3-peri" for a generic R-Car Gen3 or RZ/G2
+ compatible device
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first
diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
index 43960faf5a88..90719f501852 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -4,7 +4,9 @@ Required properties:
- compatible: Must contain one or more of the following:
- "renesas,usbhs-r8a7743" for r8a7743 (RZ/G1M) compatible device
+ - "renesas,usbhs-r8a7744" for r8a7744 (RZ/G1N) compatible device
- "renesas,usbhs-r8a7745" for r8a7745 (RZ/G1E) compatible device
+ - "renesas,usbhs-r8a774a1" for r8a774a1 (RZ/G2M) compatible device
- "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device
- "renesas,usbhs-r8a7791" for r8a7791 (R-Car M2-W) compatible device
- "renesas,usbhs-r8a7792" for r8a7792 (R-Car V2H) compatible device
@@ -13,10 +15,11 @@ Required properties:
- "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device
- "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device
- "renesas,usbhs-r8a77965" for r8a77965 (R-Car M3-N) compatible device
+ - "renesas,usbhs-r8a77990" for r8a77990 (R-Car E3) compatible device
- "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device
- "renesas,usbhs-r7s72100" for r7s72100 (RZ/A1) compatible device
- "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices
- - "renesas,rcar-gen3-usbhs" for R-Car Gen3 compatible device
+ - "renesas,rcar-gen3-usbhs" for R-Car Gen3 or RZ/G2 compatible devices
- "renesas,rza1-usbhs" for RZ/A1 compatible device
When compatible with the generic version, nodes must list the
@@ -25,7 +28,11 @@ Required properties:
- reg: Base address and length of the register for the USBHS
- interrupts: Interrupt specifier for the USBHS
- - clocks: A list of phandle + clock specifier pairs
+ - clocks: A list of phandle + clock specifier pairs.
+ - In case of "renesas,rcar-gen3-usbhs", two clocks are required.
+ First clock should be peripheral and second one should be host.
+ - In case of except above, one clock is required. First clock
+ should be peripheral.
Optional properties:
- renesas,buswait: Integer to use BUSWAIT register
diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
index 0f1b75386207..406252d14c6b 100644
--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
@@ -15,7 +15,11 @@ Optional properties:
- needs-reset-on-resume : boolean, set this to force EHCI reset after resume
- has-transaction-translator : boolean, set this if EHCI have a Transaction
Translator built into the root hub.
- - clocks : a list of phandle + clock specifier pairs
+ - clocks : a list of phandle + clock specifier pairs. In case of Renesas
+ R-Car Gen3 SoCs:
+ - if a host only channel: first clock should be host.
+ - if a USB DRD channel: first clock should be host and second one
+ should be peripheral.
- phys : see usb-hcd.txt in the current directory
- resets : phandle + reset specifier pair
diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
index a8d2103d1f3d..aaaa5255c972 100644
--- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
@@ -12,7 +12,11 @@ Optional properties:
- no-big-frame-no : boolean, set if frame_no lives in bits [15:0] of HCCA
- remote-wakeup-connected: remote wakeup is wired on the platform
- num-ports : u32, to override the detected port count
-- clocks : a list of phandle + clock specifier pairs
+- clocks : a list of phandle + clock specifier pairs. In case of Renesas
+ R-Car Gen3 SoCs:
+ - if a host only channel: first clock should be host.
+ - if a USB DRD channel: first clock should be host and second one
+ should be peripheral.
- phys : see usb-hcd.txt in the current directory
- resets : a list of phandle + reset specifier pairs
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index ac4cd0d6195a..fea8b1545751 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -8,6 +8,8 @@ Required properties:
- "marvell,armada-375-xhci" for Armada 375 SoCs
- "marvell,armada-380-xhci" for Armada 38x SoCs
- "renesas,xhci-r8a7743" for r8a7743 SoC
+ - "renesas,xhci-r8a7744" for r8a7744 SoC
+ - "renesas,xhci-r8a774a1" for r8a774a1 SoC
- "renesas,xhci-r8a7790" for r8a7790 SoC
- "renesas,xhci-r8a7791" for r8a7791 SoC
- "renesas,xhci-r8a7793" for r8a7793 SoC
@@ -17,7 +19,8 @@ Required properties:
- "renesas,xhci-r8a77990" for r8a77990 SoC
- "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible
device
- - "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 compatible device
+ - "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 or RZ/G2 compatible
+ device
- "xhci-platform" (deprecated)
When compatible with the generic version, nodes must list the
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 2c3fc512e746..4b1a2a8fcc16 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -84,6 +84,7 @@ cosmic Cosmic Circuits
crane Crane Connectivity Solutions
creative Creative Technology Ltd
crystalfontz Crystalfontz America, Inc.
+csky Hangzhou C-SKY Microsystems Co., Ltd
cubietech Cubietech, Ltd.
cypress Cypress Semiconductor Corporation
cznic CZ.NIC, z.s.p.o.
@@ -114,6 +115,7 @@ elan Elan Microelectronic Corp.
embest Shenzhen Embest Technology Co., Ltd.
emmicro EM Microelectronic
emtrion emtrion GmbH
+endless Endless Mobile, Inc.
energymicro Silicon Laboratories (formerly Energy Micro AS)
engicam Engicam S.r.l.
epcos EPCOS AG
@@ -127,6 +129,7 @@ everspin Everspin Technologies, Inc.
exar Exar Corporation
excito Excito
ezchip EZchip Semiconductor
+facebook Facebook
fairphone Fairphone B.V.
faraday Faraday Technology Corporation
fastrax Fastrax Oy
@@ -235,6 +238,7 @@ micrel Micrel Inc.
microchip Microchip Technology Inc.
microcrystal Micro Crystal AG
micron Micron Technology Inc.
+mikroe MikroElektronika d.o.o.
minix MINIX Technology Ltd.
miramems MiraMEMS Sensing Technology Co., Ltd.
mitsubishi Mitsubishi Electric Corporation
@@ -274,6 +278,7 @@ nxp NXP Semiconductors
okaya Okaya Electric America, Inc.
oki Oki Electric Industry Co., Ltd.
olimex OLIMEX Ltd.
+olpc One Laptop Per Child
onion Onion Corporation
onnn ON Semiconductor Corp.
ontat On Tat Industrial Company
@@ -297,6 +302,7 @@ pine64 Pine64
pixcir PIXCIR MICROELECTRONICS Co., Ltd
plathome Plat'Home Co., Ltd.
plda PLDA
+plx Broadcom Corporation (formerly PLX Technology)
portwell Portwell Inc.
poslab Poslab Technology Co., Ltd.
powervr PowerVR (deprecated, use img)
diff --git a/Documentation/devicetree/bindings/watchdog/armada-37xx-wdt.txt b/Documentation/devicetree/bindings/watchdog/armada-37xx-wdt.txt
new file mode 100644
index 000000000000..a8d00c31a1d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/armada-37xx-wdt.txt
@@ -0,0 +1,23 @@
+* Armada 37xx CPU Watchdog Timer Controller
+
+Required properties:
+- compatible : must be "marvell,armada-3700-wdt"
+- reg : base physical address of the controller and length of memory mapped
+ region.
+- clocks : the clock feeding the watchdog timer. See clock-bindings.txt
+- marvell,system-controller : reference to syscon node for the CPU Miscellaneous
+ Registers
+
+Example:
+
+ cpu_misc: system-controller@d000 {
+ compatible = "marvell,armada-3700-cpu-misc", "syscon";
+ reg = <0xd000 0x1000>;
+ };
+
+ wdt: watchdog@8300 {
+ compatible = "marvell,armada-3700-wdt";
+ reg = <0x8300 0x40>;
+ marvell,system-controller = <&cpu_misc>;
+ clocks = <&xtalclk>;
+ };
diff --git a/Documentation/devicetree/bindings/watchdog/mpc8xxx-wdt.txt b/Documentation/devicetree/bindings/watchdog/mpc8xxx-wdt.txt
new file mode 100644
index 000000000000..a384ff5b3ce8
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/mpc8xxx-wdt.txt
@@ -0,0 +1,25 @@
+* Freescale mpc8xxx watchdog driver (For 83xx, 86xx and 8xx)
+
+Required properties:
+- compatible: Shall contain one of the following:
+ "mpc83xx_wdt" for an mpc83xx
+ "fsl,mpc8610-wdt" for an mpc86xx
+ "fsl,mpc823-wdt" for an mpc8xx
+- reg: base physical address and length of the area hosting the
+ watchdog registers.
+ On the 83xx, "Watchdog Timer Registers" area: <0x200 0x100>
+ On the 86xx, "Watchdog Timer Registers" area: <0xe4000 0x100>
+ On the 8xx, "General System Interface Unit" area: <0x0 0x10>
+
+Optional properties:
+- reg: additional physical address and length (4) of location of the
+ Reset Status Register (called RSTRSCR on the mpc86xx)
+ On the 83xx, it is located at offset 0x910
+ On the 86xx, it is located at offset 0xe0094
+ On the 8xx, it is located at offset 0x288
+
+Example:
+ WDT: watchdog@0 {
+ compatible = "fsl,mpc823-wdt";
+ reg = <0x0 0x10 0x288 0x4>;
+ };
diff --git a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
index 9407212a85a8..a8ee29fd9ac8 100644
--- a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
@@ -6,6 +6,7 @@ Required properties:
version.
Examples with soctypes are:
- "renesas,r8a7743-wdt" (RZ/G1M)
+ - "renesas,r8a7744-wdt" (RZ/G1N)
- "renesas,r8a7745-wdt" (RZ/G1E)
- "renesas,r8a774a1-wdt" (RZ/G2M)
- "renesas,r8a7790-wdt" (R-Car H2)
@@ -20,6 +21,7 @@ Required properties:
- "renesas,r8a77990-wdt" (R-Car E3)
- "renesas,r8a77995-wdt" (R-Car D3)
- "renesas,r7s72100-wdt" (RZ/A1)
+ - "renesas,r7s9210-wdt" (RZ/A2)
The generic compatible string must be:
- "renesas,rza-wdt" for RZ/A
- "renesas,rcar-gen2-wdt" for R-Car Gen2 and RZ/G1
diff --git a/Documentation/driver-api/basics.rst b/Documentation/driver-api/basics.rst
index 826e85d50a16..e970fadf4d1a 100644
--- a/Documentation/driver-api/basics.rst
+++ b/Documentation/driver-api/basics.rst
@@ -121,6 +121,9 @@ Kernel utility functions
.. kernel-doc:: kernel/rcu/update.c
:export:
+.. kernel-doc:: include/linux/overflow.h
+ :internal:
+
Device Resource Management
--------------------------
diff --git a/Documentation/driver-api/firewire.rst b/Documentation/driver-api/firewire.rst
new file mode 100644
index 000000000000..94a2d7f01d99
--- /dev/null
+++ b/Documentation/driver-api/firewire.rst
@@ -0,0 +1,48 @@
+===========================================
+Firewire (IEEE 1394) driver Interface Guide
+===========================================
+
+Introduction and Overview
+=========================
+
+The Linux FireWire subsystem adds some interfaces into the Linux system to
+ use/maintain+any resource on IEEE 1394 bus.
+
+The main purpose of these interfaces is to access address space on each node
+on IEEE 1394 bus by ISO/IEC 13213 (IEEE 1212) procedure, and to control
+isochronous resources on the bus by IEEE 1394 procedure.
+
+Two types of interfaces are added, according to consumers of the interface. A
+set of userspace interfaces is available via `firewire character devices`. A set
+of kernel interfaces is available via exported symbols in `firewire-core` module.
+
+Firewire char device data structures
+====================================
+
+.. include:: /ABI/stable/firewire-cdev
+ :literal:
+
+.. kernel-doc:: include/uapi/linux/firewire-cdev.h
+ :internal:
+
+Firewire device probing and sysfs interfaces
+============================================
+
+.. include:: /ABI/stable/sysfs-bus-firewire
+ :literal:
+
+.. kernel-doc:: drivers/firewire/core-device.c
+ :export:
+
+Firewire core transaction interfaces
+====================================
+
+.. kernel-doc:: drivers/firewire/core-transaction.c
+ :export:
+
+Firewire Isochronous I/O interfaces
+===================================
+
+.. kernel-doc:: drivers/firewire/core-iso.c
+ :export:
+
diff --git a/Documentation/driver-api/fpga/fpga-bridge.rst b/Documentation/driver-api/fpga/fpga-bridge.rst
index 2c2aaca894bf..71c5a40da320 100644
--- a/Documentation/driver-api/fpga/fpga-bridge.rst
+++ b/Documentation/driver-api/fpga/fpga-bridge.rst
@@ -4,6 +4,12 @@ FPGA Bridge
API to implement a new FPGA bridge
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+* struct :c:type:`fpga_bridge` — The FPGA Bridge structure
+* struct :c:type:`fpga_bridge_ops` — Low level Bridge driver ops
+* :c:func:`devm_fpga_bridge_create()` — Allocate and init a bridge struct
+* :c:func:`fpga_bridge_register()` — Register a bridge
+* :c:func:`fpga_bridge_unregister()` — Unregister a bridge
+
.. kernel-doc:: include/linux/fpga/fpga-bridge.h
:functions: fpga_bridge
@@ -11,39 +17,10 @@ API to implement a new FPGA bridge
:functions: fpga_bridge_ops
.. kernel-doc:: drivers/fpga/fpga-bridge.c
- :functions: fpga_bridge_create
-
-.. kernel-doc:: drivers/fpga/fpga-bridge.c
- :functions: fpga_bridge_free
+ :functions: devm_fpga_bridge_create
.. kernel-doc:: drivers/fpga/fpga-bridge.c
:functions: fpga_bridge_register
.. kernel-doc:: drivers/fpga/fpga-bridge.c
:functions: fpga_bridge_unregister
-
-API to control an FPGA bridge
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-You probably won't need these directly. FPGA regions should handle this.
-
-.. kernel-doc:: drivers/fpga/fpga-bridge.c
- :functions: of_fpga_bridge_get
-
-.. kernel-doc:: drivers/fpga/fpga-bridge.c
- :functions: fpga_bridge_get
-
-.. kernel-doc:: drivers/fpga/fpga-bridge.c
- :functions: fpga_bridge_put
-
-.. kernel-doc:: drivers/fpga/fpga-bridge.c
- :functions: fpga_bridge_get_to_list
-
-.. kernel-doc:: drivers/fpga/fpga-bridge.c
- :functions: of_fpga_bridge_get_to_list
-
-.. kernel-doc:: drivers/fpga/fpga-bridge.c
- :functions: fpga_bridge_enable
-
-.. kernel-doc:: drivers/fpga/fpga-bridge.c
- :functions: fpga_bridge_disable
diff --git a/Documentation/driver-api/fpga/fpga-mgr.rst b/Documentation/driver-api/fpga/fpga-mgr.rst
index 4b3825da48d9..576f1945eacd 100644
--- a/Documentation/driver-api/fpga/fpga-mgr.rst
+++ b/Documentation/driver-api/fpga/fpga-mgr.rst
@@ -49,18 +49,14 @@ probe function calls fpga_mgr_register(), such as::
* them in priv
*/
- mgr = fpga_mgr_create(dev, "Altera SOCFPGA FPGA Manager",
- &socfpga_fpga_ops, priv);
+ mgr = devm_fpga_mgr_create(dev, "Altera SOCFPGA FPGA Manager",
+ &socfpga_fpga_ops, priv);
if (!mgr)
return -ENOMEM;
platform_set_drvdata(pdev, mgr);
- ret = fpga_mgr_register(mgr);
- if (ret)
- fpga_mgr_free(mgr);
-
- return ret;
+ return fpga_mgr_register(mgr);
}
static int socfpga_fpga_remove(struct platform_device *pdev)
@@ -102,67 +98,19 @@ The ops include a .state function which will determine the state the FPGA is in
and return a code of type enum fpga_mgr_states. It doesn't result in a change
in state.
-How to write an image buffer to a supported FPGA
-------------------------------------------------
-
-Some sample code::
-
- #include <linux/fpga/fpga-mgr.h>
-
- struct fpga_manager *mgr;
- struct fpga_image_info *info;
- int ret;
-
- /*
- * Get a reference to FPGA manager. The manager is not locked, so you can
- * hold onto this reference without it preventing programming.
- *
- * This example uses the device node of the manager. Alternatively, use
- * fpga_mgr_get(dev) instead if you have the device.
- */
- mgr = of_fpga_mgr_get(mgr_node);
-
- /* struct with information about the FPGA image to program. */
- info = fpga_image_info_alloc(dev);
-
- /* flags indicates whether to do full or partial reconfiguration */
- info->flags = FPGA_MGR_PARTIAL_RECONFIG;
-
- /*
- * At this point, indicate where the image is. This is pseudo-code; you're
- * going to use one of these three.
- */
- if (image is in a scatter gather table) {
-
- info->sgt = [your scatter gather table]
-
- } else if (image is in a buffer) {
-
- info->buf = [your image buffer]
- info->count = [image buffer size]
-
- } else if (image is in a firmware file) {
-
- info->firmware_name = devm_kstrdup(dev, firmware_name, GFP_KERNEL);
-
- }
-
- /* Get exclusive control of FPGA manager */
- ret = fpga_mgr_lock(mgr);
-
- /* Load the buffer to the FPGA */
- ret = fpga_mgr_buf_load(mgr, &info, buf, count);
-
- /* Release the FPGA manager */
- fpga_mgr_unlock(mgr);
- fpga_mgr_put(mgr);
-
- /* Deallocate the image info if you're done with it */
- fpga_image_info_free(info);
-
API for implementing a new FPGA Manager driver
----------------------------------------------
+* ``fpga_mgr_states`` — Values for :c:member:`fpga_manager->state`.
+* struct :c:type:`fpga_manager` — the FPGA manager struct
+* struct :c:type:`fpga_manager_ops` — Low level FPGA manager driver ops
+* :c:func:`devm_fpga_mgr_create` — Allocate and init a manager struct
+* :c:func:`fpga_mgr_register` — Register an FPGA manager
+* :c:func:`fpga_mgr_unregister` — Unregister an FPGA manager
+
+.. kernel-doc:: include/linux/fpga/fpga-mgr.h
+ :functions: fpga_mgr_states
+
.. kernel-doc:: include/linux/fpga/fpga-mgr.h
:functions: fpga_manager
@@ -170,51 +118,10 @@ API for implementing a new FPGA Manager driver
:functions: fpga_manager_ops
.. kernel-doc:: drivers/fpga/fpga-mgr.c
- :functions: fpga_mgr_create
-
-.. kernel-doc:: drivers/fpga/fpga-mgr.c
- :functions: fpga_mgr_free
+ :functions: devm_fpga_mgr_create
.. kernel-doc:: drivers/fpga/fpga-mgr.c
:functions: fpga_mgr_register
.. kernel-doc:: drivers/fpga/fpga-mgr.c
:functions: fpga_mgr_unregister
-
-API for programming an FPGA
----------------------------
-
-.. kernel-doc:: include/linux/fpga/fpga-mgr.h
- :functions: fpga_image_info
-
-.. kernel-doc:: include/linux/fpga/fpga-mgr.h
- :functions: fpga_mgr_states
-
-.. kernel-doc:: drivers/fpga/fpga-mgr.c
- :functions: fpga_image_info_alloc
-
-.. kernel-doc:: drivers/fpga/fpga-mgr.c
- :functions: fpga_image_info_free
-
-.. kernel-doc:: drivers/fpga/fpga-mgr.c
- :functions: of_fpga_mgr_get
-
-.. kernel-doc:: drivers/fpga/fpga-mgr.c
- :functions: fpga_mgr_get
-
-.. kernel-doc:: drivers/fpga/fpga-mgr.c
- :functions: fpga_mgr_put
-
-.. kernel-doc:: drivers/fpga/fpga-mgr.c
- :functions: fpga_mgr_lock
-
-.. kernel-doc:: drivers/fpga/fpga-mgr.c
- :functions: fpga_mgr_unlock
-
-.. kernel-doc:: include/linux/fpga/fpga-mgr.h
- :functions: fpga_mgr_states
-
-Note - use :c:func:`fpga_region_program_fpga()` instead of :c:func:`fpga_mgr_load()`
-
-.. kernel-doc:: drivers/fpga/fpga-mgr.c
- :functions: fpga_mgr_load
diff --git a/Documentation/driver-api/fpga/fpga-programming.rst b/Documentation/driver-api/fpga/fpga-programming.rst
new file mode 100644
index 000000000000..b5484df6ff0f
--- /dev/null
+++ b/Documentation/driver-api/fpga/fpga-programming.rst
@@ -0,0 +1,107 @@
+In-kernel API for FPGA Programming
+==================================
+
+Overview
+--------
+
+The in-kernel API for FPGA programming is a combination of APIs from
+FPGA manager, bridge, and regions. The actual function used to
+trigger FPGA programming is :c:func:`fpga_region_program_fpga()`.
+
+:c:func:`fpga_region_program_fpga()` uses functionality supplied by
+the FPGA manager and bridges. It will:
+
+ * lock the region's mutex
+ * lock the mutex of the region's FPGA manager
+ * build a list of FPGA bridges if a method has been specified to do so
+ * disable the bridges
+ * program the FPGA using info passed in :c:member:`fpga_region->info`.
+ * re-enable the bridges
+ * release the locks
+
+The struct fpga_image_info specifies what FPGA image to program. It is
+allocated/freed by :c:func:`fpga_image_info_alloc()` and freed with
+:c:func:`fpga_image_info_free()`
+
+How to program an FPGA using a region
+-------------------------------------
+
+When the FPGA region driver probed, it was given a pointer to an FPGA manager
+driver so it knows which manager to use. The region also either has a list of
+bridges to control during programming or it has a pointer to a function that
+will generate that list. Here's some sample code of what to do next::
+
+ #include <linux/fpga/fpga-mgr.h>
+ #include <linux/fpga/fpga-region.h>
+
+ struct fpga_image_info *info;
+ int ret;
+
+ /*
+ * First, alloc the struct with information about the FPGA image to
+ * program.
+ */
+ info = fpga_image_info_alloc(dev);
+ if (!info)
+ return -ENOMEM;
+
+ /* Set flags as needed, such as: */
+ info->flags = FPGA_MGR_PARTIAL_RECONFIG;
+
+ /*
+ * Indicate where the FPGA image is. This is pseudo-code; you're
+ * going to use one of these three.
+ */
+ if (image is in a scatter gather table) {
+
+ info->sgt = [your scatter gather table]
+
+ } else if (image is in a buffer) {
+
+ info->buf = [your image buffer]
+ info->count = [image buffer size]
+
+ } else if (image is in a firmware file) {
+
+ info->firmware_name = devm_kstrdup(dev, firmware_name,
+ GFP_KERNEL);
+
+ }
+
+ /* Add info to region and do the programming */
+ region->info = info;
+ ret = fpga_region_program_fpga(region);
+
+ /* Deallocate the image info if you're done with it */
+ region->info = NULL;
+ fpga_image_info_free(info);
+
+ if (ret)
+ return ret;
+
+ /* Now enumerate whatever hardware has appeared in the FPGA. */
+
+API for programming an FPGA
+---------------------------
+
+* :c:func:`fpga_region_program_fpga` — Program an FPGA
+* :c:type:`fpga_image_info` — Specifies what FPGA image to program
+* :c:func:`fpga_image_info_alloc()` — Allocate an FPGA image info struct
+* :c:func:`fpga_image_info_free()` — Free an FPGA image info struct
+
+.. kernel-doc:: drivers/fpga/fpga-region.c
+ :functions: fpga_region_program_fpga
+
+FPGA Manager flags
+
+.. kernel-doc:: include/linux/fpga/fpga-mgr.h
+ :doc: FPGA Manager flags
+
+.. kernel-doc:: include/linux/fpga/fpga-mgr.h
+ :functions: fpga_image_info
+
+.. kernel-doc:: drivers/fpga/fpga-mgr.c
+ :functions: fpga_image_info_alloc
+
+.. kernel-doc:: drivers/fpga/fpga-mgr.c
+ :functions: fpga_image_info_free
diff --git a/Documentation/driver-api/fpga/fpga-region.rst b/Documentation/driver-api/fpga/fpga-region.rst
index f30333ce828e..0529b2d2231a 100644
--- a/Documentation/driver-api/fpga/fpga-region.rst
+++ b/Documentation/driver-api/fpga/fpga-region.rst
@@ -34,41 +34,6 @@ fpga_image_info including:
* flags indicating specifics such as whether the image is for partial
reconfiguration.
-How to program an FPGA using a region
--------------------------------------
-
-First, allocate the info struct::
-
- info = fpga_image_info_alloc(dev);
- if (!info)
- return -ENOMEM;
-
-Set flags as needed, i.e.::
-
- info->flags |= FPGA_MGR_PARTIAL_RECONFIG;
-
-Point to your FPGA image, such as::
-
- info->sgt = &sgt;
-
-Add info to region and do the programming::
-
- region->info = info;
- ret = fpga_region_program_fpga(region);
-
-:c:func:`fpga_region_program_fpga()` operates on info passed in the
-fpga_image_info (region->info). This function will attempt to:
-
- * lock the region's mutex
- * lock the region's FPGA manager
- * build a list of FPGA bridges if a method has been specified to do so
- * disable the bridges
- * program the FPGA
- * re-enable the bridges
- * release the locks
-
-Then you will want to enumerate whatever hardware has appeared in the FPGA.
-
How to add a new FPGA region
----------------------------
@@ -77,26 +42,62 @@ An example of usage can be seen in the probe function of [#f2]_.
.. [#f1] ../devicetree/bindings/fpga/fpga-region.txt
.. [#f2] ../../drivers/fpga/of-fpga-region.c
-API to program an FPGA
-----------------------
-
-.. kernel-doc:: drivers/fpga/fpga-region.c
- :functions: fpga_region_program_fpga
-
API to add a new FPGA region
----------------------------
+* struct :c:type:`fpga_region` — The FPGA region struct
+* :c:func:`devm_fpga_region_create` — Allocate and init a region struct
+* :c:func:`fpga_region_register` — Register an FPGA region
+* :c:func:`fpga_region_unregister` — Unregister an FPGA region
+
+The FPGA region's probe function will need to get a reference to the FPGA
+Manager it will be using to do the programming. This usually would happen
+during the region's probe function.
+
+* :c:func:`fpga_mgr_get` — Get a reference to an FPGA manager, raise ref count
+* :c:func:`of_fpga_mgr_get` — Get a reference to an FPGA manager, raise ref count,
+ given a device node.
+* :c:func:`fpga_mgr_put` — Put an FPGA manager
+
+The FPGA region will need to specify which bridges to control while programming
+the FPGA. The region driver can build a list of bridges during probe time
+(:c:member:`fpga_region->bridge_list`) or it can have a function that creates
+the list of bridges to program just before programming
+(:c:member:`fpga_region->get_bridges`). The FPGA bridge framework supplies the
+following APIs to handle building or tearing down that list.
+
+* :c:func:`fpga_bridge_get_to_list` — Get a ref of an FPGA bridge, add it to a
+ list
+* :c:func:`of_fpga_bridge_get_to_list` — Get a ref of an FPGA bridge, add it to a
+ list, given a device node
+* :c:func:`fpga_bridges_put` — Given a list of bridges, put them
+
.. kernel-doc:: include/linux/fpga/fpga-region.h
:functions: fpga_region
.. kernel-doc:: drivers/fpga/fpga-region.c
- :functions: fpga_region_create
-
-.. kernel-doc:: drivers/fpga/fpga-region.c
- :functions: fpga_region_free
+ :functions: devm_fpga_region_create
.. kernel-doc:: drivers/fpga/fpga-region.c
:functions: fpga_region_register
.. kernel-doc:: drivers/fpga/fpga-region.c
:functions: fpga_region_unregister
+
+.. kernel-doc:: drivers/fpga/fpga-mgr.c
+ :functions: fpga_mgr_get
+
+.. kernel-doc:: drivers/fpga/fpga-mgr.c
+ :functions: of_fpga_mgr_get
+
+.. kernel-doc:: drivers/fpga/fpga-mgr.c
+ :functions: fpga_mgr_put
+
+.. kernel-doc:: drivers/fpga/fpga-bridge.c
+ :functions: fpga_bridge_get_to_list
+
+.. kernel-doc:: drivers/fpga/fpga-bridge.c
+ :functions: of_fpga_bridge_get_to_list
+
+.. kernel-doc:: drivers/fpga/fpga-bridge.c
+ :functions: fpga_bridges_put
diff --git a/Documentation/driver-api/fpga/index.rst b/Documentation/driver-api/fpga/index.rst
index c51e5ebd544a..31a4773bd2e6 100644
--- a/Documentation/driver-api/fpga/index.rst
+++ b/Documentation/driver-api/fpga/index.rst
@@ -11,3 +11,5 @@ FPGA Subsystem
fpga-mgr
fpga-bridge
fpga-region
+ fpga-programming
+
diff --git a/Documentation/driver-api/fpga/intro.rst b/Documentation/driver-api/fpga/intro.rst
index 50d1cab84950..f54c7dabcc7d 100644
--- a/Documentation/driver-api/fpga/intro.rst
+++ b/Documentation/driver-api/fpga/intro.rst
@@ -44,7 +44,7 @@ FPGA Region
-----------
If you are adding a new interface to the FPGA framework, add it on top
-of an FPGA region to allow the most reuse of your interface.
+of an FPGA region.
The FPGA Region framework (fpga-region.c) associates managers and
bridges as reconfigurable regions. A region may refer to the whole
diff --git a/Documentation/driver-api/gpio/board.rst b/Documentation/driver-api/gpio/board.rst
index 2c112553df84..a0f294e2e250 100644
--- a/Documentation/driver-api/gpio/board.rst
+++ b/Documentation/driver-api/gpio/board.rst
@@ -193,3 +193,27 @@ And the table can be added to the board code as follows::
The line will be hogged as soon as the gpiochip is created or - in case the
chip was created earlier - when the hog table is registered.
+
+Arrays of pins
+--------------
+In addition to requesting pins belonging to a function one by one, a device may
+also request an array of pins assigned to the function. The way those pins are
+mapped to the device determines if the array qualifies for fast bitmap
+processing. If yes, a bitmap is passed over get/set array functions directly
+between a caller and a respective .get/set_multiple() callback of a GPIO chip.
+
+In order to qualify for fast bitmap processing, the array must meet the
+following requirements:
+- pin hardware number of array member 0 must also be 0,
+- pin hardware numbers of consecutive array members which belong to the same
+ chip as member 0 does must also match their array indexes.
+
+Otherwise fast bitmap processing path is not used in order to avoid consecutive
+pins which belong to the same chip but are not in hardware order being processed
+separately.
+
+If the array applies for fast bitmap processing path, pins which belong to
+different chips than member 0 does, as well as those with indexes different from
+their hardware pin numbers, are excluded from the fast path, both input and
+output. Moreover, open drain and open source pins are excluded from fast bitmap
+output processing.
diff --git a/Documentation/driver-api/gpio/consumer.rst b/Documentation/driver-api/gpio/consumer.rst
index aa03f389d41d..5e4d8aa68913 100644
--- a/Documentation/driver-api/gpio/consumer.rst
+++ b/Documentation/driver-api/gpio/consumer.rst
@@ -109,9 +109,11 @@ For a function using multiple GPIOs all of those can be obtained with one call::
enum gpiod_flags flags)
This function returns a struct gpio_descs which contains an array of
-descriptors::
+descriptors. It also contains a pointer to a gpiolib private structure which,
+if passed back to get/set array functions, may speed up I/O proocessing::
struct gpio_descs {
+ struct gpio_array *info;
unsigned int ndescs;
struct gpio_desc *desc[];
}
@@ -323,29 +325,37 @@ The following functions get or set the values of an array of GPIOs::
int gpiod_get_array_value(unsigned int array_size,
struct gpio_desc **desc_array,
- int *value_array);
+ struct gpio_array *array_info,
+ unsigned long *value_bitmap);
int gpiod_get_raw_array_value(unsigned int array_size,
struct gpio_desc **desc_array,
- int *value_array);
+ struct gpio_array *array_info,
+ unsigned long *value_bitmap);
int gpiod_get_array_value_cansleep(unsigned int array_size,
struct gpio_desc **desc_array,
- int *value_array);
+ struct gpio_array *array_info,
+ unsigned long *value_bitmap);
int gpiod_get_raw_array_value_cansleep(unsigned int array_size,
struct gpio_desc **desc_array,
- int *value_array);
-
- void gpiod_set_array_value(unsigned int array_size,
- struct gpio_desc **desc_array,
- int *value_array)
- void gpiod_set_raw_array_value(unsigned int array_size,
- struct gpio_desc **desc_array,
- int *value_array)
- void gpiod_set_array_value_cansleep(unsigned int array_size,
- struct gpio_desc **desc_array,
- int *value_array)
- void gpiod_set_raw_array_value_cansleep(unsigned int array_size,
- struct gpio_desc **desc_array,
- int *value_array)
+ struct gpio_array *array_info,
+ unsigned long *value_bitmap);
+
+ int gpiod_set_array_value(unsigned int array_size,
+ struct gpio_desc **desc_array,
+ struct gpio_array *array_info,
+ unsigned long *value_bitmap)
+ int gpiod_set_raw_array_value(unsigned int array_size,
+ struct gpio_desc **desc_array,
+ struct gpio_array *array_info,
+ unsigned long *value_bitmap)
+ int gpiod_set_array_value_cansleep(unsigned int array_size,
+ struct gpio_desc **desc_array,
+ struct gpio_array *array_info,
+ unsigned long *value_bitmap)
+ int gpiod_set_raw_array_value_cansleep(unsigned int array_size,
+ struct gpio_desc **desc_array,
+ struct gpio_array *array_info,
+ unsigned long *value_bitmap)
The array can be an arbitrary set of GPIOs. The functions will try to access
GPIOs belonging to the same bank or chip simultaneously if supported by the
@@ -356,8 +366,9 @@ accessed sequentially.
The functions take three arguments:
* array_size - the number of array elements
* desc_array - an array of GPIO descriptors
- * value_array - an array to store the GPIOs' values (get) or
- an array of values to assign to the GPIOs (set)
+ * array_info - optional information obtained from gpiod_array_get()
+ * value_bitmap - a bitmap to store the GPIOs' values (get) or
+ a bitmap of values to assign to the GPIOs (set)
The descriptor array can be obtained using the gpiod_get_array() function
or one of its variants. If the group of descriptors returned by that function
@@ -366,16 +377,25 @@ the struct gpio_descs returned by gpiod_get_array()::
struct gpio_descs *my_gpio_descs = gpiod_get_array(...);
gpiod_set_array_value(my_gpio_descs->ndescs, my_gpio_descs->desc,
- my_gpio_values);
+ my_gpio_descs->info, my_gpio_value_bitmap);
It is also possible to access a completely arbitrary array of descriptors. The
descriptors may be obtained using any combination of gpiod_get() and
gpiod_get_array(). Afterwards the array of descriptors has to be setup
-manually before it can be passed to one of the above functions.
+manually before it can be passed to one of the above functions. In that case,
+array_info should be set to NULL.
Note that for optimal performance GPIOs belonging to the same chip should be
contiguous within the array of descriptors.
+Still better performance may be achieved if array indexes of the descriptors
+match hardware pin numbers of a single chip. If an array passed to a get/set
+array function matches the one obtained from gpiod_get_array() and array_info
+associated with the array is also passed, the function may take a fast bitmap
+processing path, passing the value_bitmap argument directly to the respective
+.get/set_multiple() callback of the chip. That allows for utilization of GPIO
+banks as data I/O ports without much loss of performance.
+
The return value of gpiod_get_array_value() and its variants is 0 on success
or negative on error. Note the difference to gpiod_get_value(), which returns
0 or 1 on success to convey the GPIO value. With the array functions, the GPIO
diff --git a/Documentation/driver-api/gpio/driver.rst b/Documentation/driver-api/gpio/driver.rst
index cbe0242842d1..a6c14ff0c54f 100644
--- a/Documentation/driver-api/gpio/driver.rst
+++ b/Documentation/driver-api/gpio/driver.rst
@@ -374,7 +374,28 @@ When implementing an irqchip inside a GPIO driver, these two functions should
typically be called in the .startup() and .shutdown() callbacks from the
irqchip.
-When using the gpiolib irqchip helpers, these callback are automatically
+When using the gpiolib irqchip helpers, these callbacks are automatically
+assigned.
+
+
+Disabling and enabling IRQs
+---------------------------
+When a GPIO is used as an IRQ signal, then gpiolib also needs to know if
+the IRQ is enabled or disabled. In order to inform gpiolib about this,
+a driver should call::
+
+ void gpiochip_disable_irq(struct gpio_chip *chip, unsigned int offset)
+
+This allows drivers to drive the GPIO as an output while the IRQ is
+disabled. When the IRQ is enabled again, a driver should call::
+
+ void gpiochip_enable_irq(struct gpio_chip *chip, unsigned int offset)
+
+When implementing an irqchip inside a GPIO driver, these two functions should
+typically be called in the .irq_disable() and .irq_enable() callbacks from the
+irqchip.
+
+When using the gpiolib irqchip helpers, these callbacks are automatically
assigned.
Real-Time compliance for GPIO IRQ chips
diff --git a/Documentation/driver-api/gpio/index.rst b/Documentation/driver-api/gpio/index.rst
index 6a374ded1287..c5b8467f9104 100644
--- a/Documentation/driver-api/gpio/index.rst
+++ b/Documentation/driver-api/gpio/index.rst
@@ -38,7 +38,7 @@ Device tree support
Device-managed API
==================
-.. kernel-doc:: drivers/gpio/devres.c
+.. kernel-doc:: drivers/gpio/gpiolib-devres.c
:export:
sysfs helpers
diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
index 6d9f2f9fe20e..909f991b4c0d 100644
--- a/Documentation/driver-api/index.rst
+++ b/Documentation/driver-api/index.rst
@@ -29,7 +29,8 @@ available subsections can be seen below.
iio/index
input
usb/index
- pci
+ firewire
+ pci/index
spi
i2c
hsi
diff --git a/Documentation/driver-api/mtdnand.rst b/Documentation/driver-api/mtdnand.rst
index c55a6034c397..55447659b81f 100644
--- a/Documentation/driver-api/mtdnand.rst
+++ b/Documentation/driver-api/mtdnand.rst
@@ -180,10 +180,10 @@ by a chip select decoder.
{
struct nand_chip *this = mtd_to_nand(mtd);
switch(cmd){
- case NAND_CTL_SETCLE: this->IO_ADDR_W |= CLE_ADRR_BIT; break;
- case NAND_CTL_CLRCLE: this->IO_ADDR_W &= ~CLE_ADRR_BIT; break;
- case NAND_CTL_SETALE: this->IO_ADDR_W |= ALE_ADRR_BIT; break;
- case NAND_CTL_CLRALE: this->IO_ADDR_W &= ~ALE_ADRR_BIT; break;
+ case NAND_CTL_SETCLE: this->legacy.IO_ADDR_W |= CLE_ADRR_BIT; break;
+ case NAND_CTL_CLRCLE: this->legacy.IO_ADDR_W &= ~CLE_ADRR_BIT; break;
+ case NAND_CTL_SETALE: this->legacy.IO_ADDR_W |= ALE_ADRR_BIT; break;
+ case NAND_CTL_CLRALE: this->legacy.IO_ADDR_W &= ~ALE_ADRR_BIT; break;
}
}
@@ -197,7 +197,7 @@ to read back the state of the pin. The function has no arguments and
should return 0, if the device is busy (R/B pin is low) and 1, if the
device is ready (R/B pin is high). If the hardware interface does not
give access to the ready busy pin, then the function must not be defined
-and the function pointer this->dev_ready is set to NULL.
+and the function pointer this->legacy.dev_ready is set to NULL.
Init function
-------------
@@ -235,18 +235,18 @@ necessary information about the device.
}
/* Set address of NAND IO lines */
- this->IO_ADDR_R = baseaddr;
- this->IO_ADDR_W = baseaddr;
+ this->legacy.IO_ADDR_R = baseaddr;
+ this->legacy.IO_ADDR_W = baseaddr;
/* Reference hardware control function */
this->hwcontrol = board_hwcontrol;
/* Set command delay time, see datasheet for correct value */
- this->chip_delay = CHIP_DEPENDEND_COMMAND_DELAY;
+ this->legacy.chip_delay = CHIP_DEPENDEND_COMMAND_DELAY;
/* Assign the device ready function, if available */
- this->dev_ready = board_dev_ready;
+ this->legacy.dev_ready = board_dev_ready;
this->eccmode = NAND_ECC_SOFT;
/* Scan to find existence of the device */
- if (nand_scan (board_mtd, 1)) {
+ if (nand_scan (this, 1)) {
err = -ENXIO;
goto out_ior;
}
@@ -277,7 +277,7 @@ unregisters the partitions in the MTD layer.
static void __exit board_cleanup (void)
{
/* Release resources, unregister device */
- nand_release (board_mtd);
+ nand_release (mtd_to_nand(board_mtd));
/* unmap physical address */
iounmap(baseaddr);
@@ -336,17 +336,17 @@ connected to an address decoder.
struct nand_chip *this = mtd_to_nand(mtd);
/* Deselect all chips */
- this->IO_ADDR_R &= ~BOARD_NAND_ADDR_MASK;
- this->IO_ADDR_W &= ~BOARD_NAND_ADDR_MASK;
+ this->legacy.IO_ADDR_R &= ~BOARD_NAND_ADDR_MASK;
+ this->legacy.IO_ADDR_W &= ~BOARD_NAND_ADDR_MASK;
switch (chip) {
case 0:
- this->IO_ADDR_R |= BOARD_NAND_ADDR_CHIP0;
- this->IO_ADDR_W |= BOARD_NAND_ADDR_CHIP0;
+ this->legacy.IO_ADDR_R |= BOARD_NAND_ADDR_CHIP0;
+ this->legacy.IO_ADDR_W |= BOARD_NAND_ADDR_CHIP0;
break;
....
case n:
- this->IO_ADDR_R |= BOARD_NAND_ADDR_CHIPn;
- this->IO_ADDR_W |= BOARD_NAND_ADDR_CHIPn;
+ this->legacy.IO_ADDR_R |= BOARD_NAND_ADDR_CHIPn;
+ this->legacy.IO_ADDR_W |= BOARD_NAND_ADDR_CHIPn;
break;
}
}
diff --git a/Documentation/driver-api/pci/index.rst b/Documentation/driver-api/pci/index.rst
new file mode 100644
index 000000000000..c6cf1fef61ce
--- /dev/null
+++ b/Documentation/driver-api/pci/index.rst
@@ -0,0 +1,22 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================================
+The Linux PCI driver implementer's API guide
+============================================
+
+.. class:: toc-title
+
+ Table of contents
+
+.. toctree::
+ :maxdepth: 2
+
+ pci
+ p2pdma
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`
diff --git a/Documentation/driver-api/pci/p2pdma.rst b/Documentation/driver-api/pci/p2pdma.rst
new file mode 100644
index 000000000000..4c577fa7bef9
--- /dev/null
+++ b/Documentation/driver-api/pci/p2pdma.rst
@@ -0,0 +1,145 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================
+PCI Peer-to-Peer DMA Support
+============================
+
+The PCI bus has pretty decent support for performing DMA transfers
+between two devices on the bus. This type of transaction is henceforth
+called Peer-to-Peer (or P2P). However, there are a number of issues that
+make P2P transactions tricky to do in a perfectly safe way.
+
+One of the biggest issues is that PCI doesn't require forwarding
+transactions between hierarchy domains, and in PCIe, each Root Port
+defines a separate hierarchy domain. To make things worse, there is no
+simple way to determine if a given Root Complex supports this or not.
+(See PCIe r4.0, sec 1.3.1). Therefore, as of this writing, the kernel
+only supports doing P2P when the endpoints involved are all behind the
+same PCI bridge, as such devices are all in the same PCI hierarchy
+domain, and the spec guarantees that all transactions within the
+hierarchy will be routable, but it does not require routing
+between hierarchies.
+
+The second issue is that to make use of existing interfaces in Linux,
+memory that is used for P2P transactions needs to be backed by struct
+pages. However, PCI BARs are not typically cache coherent so there are
+a few corner case gotchas with these pages so developers need to
+be careful about what they do with them.
+
+
+Driver Writer's Guide
+=====================
+
+In a given P2P implementation there may be three or more different
+types of kernel drivers in play:
+
+* Provider - A driver which provides or publishes P2P resources like
+ memory or doorbell registers to other drivers.
+* Client - A driver which makes use of a resource by setting up a
+ DMA transaction to or from it.
+* Orchestrator - A driver which orchestrates the flow of data between
+ clients and providers.
+
+In many cases there could be overlap between these three types (i.e.,
+it may be typical for a driver to be both a provider and a client).
+
+For example, in the NVMe Target Copy Offload implementation:
+
+* The NVMe PCI driver is both a client, provider and orchestrator
+ in that it exposes any CMB (Controller Memory Buffer) as a P2P memory
+ resource (provider), it accepts P2P memory pages as buffers in requests
+ to be used directly (client) and it can also make use of the CMB as
+ submission queue entries (orchastrator).
+* The RDMA driver is a client in this arrangement so that an RNIC
+ can DMA directly to the memory exposed by the NVMe device.
+* The NVMe Target driver (nvmet) can orchestrate the data from the RNIC
+ to the P2P memory (CMB) and then to the NVMe device (and vice versa).
+
+This is currently the only arrangement supported by the kernel but
+one could imagine slight tweaks to this that would allow for the same
+functionality. For example, if a specific RNIC added a BAR with some
+memory behind it, its driver could add support as a P2P provider and
+then the NVMe Target could use the RNIC's memory instead of the CMB
+in cases where the NVMe cards in use do not have CMB support.
+
+
+Provider Drivers
+----------------
+
+A provider simply needs to register a BAR (or a portion of a BAR)
+as a P2P DMA resource using :c:func:`pci_p2pdma_add_resource()`.
+This will register struct pages for all the specified memory.
+
+After that it may optionally publish all of its resources as
+P2P memory using :c:func:`pci_p2pmem_publish()`. This will allow
+any orchestrator drivers to find and use the memory. When marked in
+this way, the resource must be regular memory with no side effects.
+
+For the time being this is fairly rudimentary in that all resources
+are typically going to be P2P memory. Future work will likely expand
+this to include other types of resources like doorbells.
+
+
+Client Drivers
+--------------
+
+A client driver typically only has to conditionally change its DMA map
+routine to use the mapping function :c:func:`pci_p2pdma_map_sg()` instead
+of the usual :c:func:`dma_map_sg()` function. Memory mapped in this
+way does not need to be unmapped.
+
+The client may also, optionally, make use of
+:c:func:`is_pci_p2pdma_page()` to determine when to use the P2P mapping
+functions and when to use the regular mapping functions. In some
+situations, it may be more appropriate to use a flag to indicate a
+given request is P2P memory and map appropriately. It is important to
+ensure that struct pages that back P2P memory stay out of code that
+does not have support for them as other code may treat the pages as
+regular memory which may not be appropriate.
+
+
+Orchestrator Drivers
+--------------------
+
+The first task an orchestrator driver must do is compile a list of
+all client devices that will be involved in a given transaction. For
+example, the NVMe Target driver creates a list including the namespace
+block device and the RNIC in use. If the orchestrator has access to
+a specific P2P provider to use it may check compatibility using
+:c:func:`pci_p2pdma_distance()` otherwise it may find a memory provider
+that's compatible with all clients using :c:func:`pci_p2pmem_find()`.
+If more than one provider is supported, the one nearest to all the clients will
+be chosen first. If more than one provider is an equal distance away, the
+one returned will be chosen at random (it is not an arbitrary but
+truely random). This function returns the PCI device to use for the provider
+with a reference taken and therefore when it's no longer needed it should be
+returned with pci_dev_put().
+
+Once a provider is selected, the orchestrator can then use
+:c:func:`pci_alloc_p2pmem()` and :c:func:`pci_free_p2pmem()` to
+allocate P2P memory from the provider. :c:func:`pci_p2pmem_alloc_sgl()`
+and :c:func:`pci_p2pmem_free_sgl()` are convenience functions for
+allocating scatter-gather lists with P2P memory.
+
+Struct Page Caveats
+-------------------
+
+Driver writers should be very careful about not passing these special
+struct pages to code that isn't prepared for it. At this time, the kernel
+interfaces do not have any checks for ensuring this. This obviously
+precludes passing these pages to userspace.
+
+P2P memory is also technically IO memory but should never have any side
+effects behind it. Thus, the order of loads and stores should not be important
+and ioreadX(), iowriteX() and friends should not be necessary.
+However, as the memory is not cache coherent, if access ever needs to
+be protected by a spinlock then :c:func:`mmiowb()` must be used before
+unlocking the lock. (See ACQUIRES VS I/O ACCESSES in
+Documentation/memory-barriers.txt)
+
+
+P2P DMA Support Library
+=======================
+
+.. kernel-doc:: drivers/pci/p2pdma.c
+ :export:
diff --git a/Documentation/driver-api/pci.rst b/Documentation/driver-api/pci/pci.rst
index ca85e5e78b2c..ca85e5e78b2c 100644
--- a/Documentation/driver-api/pci.rst
+++ b/Documentation/driver-api/pci/pci.rst
diff --git a/Documentation/driver-api/soundwire/stream.rst b/Documentation/driver-api/soundwire/stream.rst
index 29121aa55fb9..26a6064503fd 100644
--- a/Documentation/driver-api/soundwire/stream.rst
+++ b/Documentation/driver-api/soundwire/stream.rst
@@ -101,6 +101,34 @@ interface. ::
+--------------------+ | |
+----------------+
+Example 5: Stereo Stream with L and R channel is rendered by 2 Masters, each
+rendering one channel, and is received by two different Slaves, each
+receiving one channel. Both Masters and both Slaves are using single port. ::
+
+ +---------------+ Clock Signal +---------------+
+ | Master +----------------------------------+ Slave |
+ | Interface | | Interface |
+ | 1 | | 1 |
+ | | Data Signal | |
+ | L +----------------------------------+ L |
+ | (Data) | Data Direction | (Data) |
+ +---------------+ +-----------------------> +---------------+
+
+ +---------------+ Clock Signal +---------------+
+ | Master +----------------------------------+ Slave |
+ | Interface | | Interface |
+ | 2 | | 2 |
+ | | Data Signal | |
+ | R +----------------------------------+ R |
+ | (Data) | Data Direction | (Data) |
+ +---------------+ +-----------------------> +---------------+
+
+Note: In multi-link cases like above, to lock, one would acquire a global
+lock and then go on locking bus instances. But, in this case the caller
+framework(ASoC DPCM) guarantees that stream operations on a card are
+always serialized. So, there is no race condition and hence no need for
+global lock.
+
SoundWire Stream Management flow
================================
@@ -174,6 +202,7 @@ per stream. From ASoC DPCM framework, this stream state maybe linked to
.startup() operation.
.. code-block:: c
+
int sdw_alloc_stream(char * stream_name);
@@ -200,6 +229,7 @@ only be invoked once by respective Master(s) and Slave(s). From ASoC DPCM
framework, this stream state is linked to .hw_params() operation.
.. code-block:: c
+
int sdw_stream_add_master(struct sdw_bus * bus,
struct sdw_stream_config * stream_config,
struct sdw_ports_config * ports_config,
@@ -245,6 +275,7 @@ stream. From ASoC DPCM framework, this stream state is linked to
.prepare() operation.
.. code-block:: c
+
int sdw_prepare_stream(struct sdw_stream_runtime * stream);
@@ -274,6 +305,7 @@ stream. From ASoC DPCM framework, this stream state is linked to
.trigger() start operation.
.. code-block:: c
+
int sdw_enable_stream(struct sdw_stream_runtime * stream);
SDW_STREAM_DISABLED
@@ -301,6 +333,7 @@ per stream. From ASoC DPCM framework, this stream state is linked to
.trigger() stop operation.
.. code-block:: c
+
int sdw_disable_stream(struct sdw_stream_runtime * stream);
@@ -325,6 +358,7 @@ per stream. From ASoC DPCM framework, this stream state is linked to
.trigger() stop operation.
.. code-block:: c
+
int sdw_deprepare_stream(struct sdw_stream_runtime * stream);
@@ -349,6 +383,7 @@ all the Master(s) and Slave(s) associated with stream. From ASoC DPCM
framework, this stream state is linked to .hw_free() operation.
.. code-block:: c
+
int sdw_stream_remove_master(struct sdw_bus * bus,
struct sdw_stream_runtime * stream);
int sdw_stream_remove_slave(struct sdw_slave * slave,
@@ -361,6 +396,7 @@ stream assigned as part of ALLOCATED state.
In .shutdown() the data structure maintaining stream state are freed up.
.. code-block:: c
+
void sdw_release_stream(struct sdw_stream_runtime * stream);
Not Supported
diff --git a/Documentation/driver-api/uio-howto.rst b/Documentation/driver-api/uio-howto.rst
index fb2eb73be4a3..25f50eace28b 100644
--- a/Documentation/driver-api/uio-howto.rst
+++ b/Documentation/driver-api/uio-howto.rst
@@ -463,8 +463,8 @@ Getting information about your UIO device
Information about all UIO devices is available in sysfs. The first thing
you should do in your driver is check ``name`` and ``version`` to make
-sure your talking to the right device and that its kernel driver has the
-version you expect.
+sure you're talking to the right device and that its kernel driver has
+the version you expect.
You should also make sure that the memory mapping you need exists and
has the size you expect.
diff --git a/Documentation/efi-stub.txt b/Documentation/efi-stub.txt
index 41df801f9a50..833edb0d0bc4 100644
--- a/Documentation/efi-stub.txt
+++ b/Documentation/efi-stub.txt
@@ -83,7 +83,18 @@ is passed to bzImage.efi.
The "dtb=" option
-----------------
-For the ARM and arm64 architectures, we also need to be able to provide a
-device tree to the kernel. This is done with the "dtb=" command line option,
-and is processed in the same manner as the "initrd=" option that is
+For the ARM and arm64 architectures, a device tree must be provided to
+the kernel. Normally firmware shall supply the device tree via the
+EFI CONFIGURATION TABLE. However, the "dtb=" command line option can
+be used to override the firmware supplied device tree, or to supply
+one when firmware is unable to.
+
+Please note: Firmware adds runtime configuration information to the
+device tree before booting the kernel. If dtb= is used to override
+the device tree, then any runtime data provided by firmware will be
+lost. The dtb= option should only be used either as a debug tool, or
+as a last resort when a device tree is not provided in the EFI
+CONFIGURATION TABLE.
+
+"dtb=" is processed in the same manner as the "initrd=" option that is
described above.
diff --git a/Documentation/fb/00-INDEX b/Documentation/fb/00-INDEX
deleted file mode 100644
index fe85e7c5907a..000000000000
--- a/Documentation/fb/00-INDEX
+++ /dev/null
@@ -1,75 +0,0 @@
-Index of files in Documentation/fb. If you think something about frame
-buffer devices needs an entry here, needs correction or you've written one
-please mail me.
- Geert Uytterhoeven <geert@linux-m68k.org>
-
-00-INDEX
- - this file.
-api.txt
- - The frame buffer API between applications and buffer devices.
-arkfb.txt
- - info on the fbdev driver for ARK Logic chips.
-aty128fb.txt
- - info on the ATI Rage128 frame buffer driver.
-cirrusfb.txt
- - info on the driver for Cirrus Logic chipsets.
-cmap_xfbdev.txt
- - an introduction to fbdev's cmap structures.
-deferred_io.txt
- - an introduction to deferred IO.
-efifb.txt
- - info on the EFI platform driver for Intel based Apple computers.
-ep93xx-fb.txt
- - info on the driver for EP93xx LCD controller.
-fbcon.txt
- - intro to and usage guide for the framebuffer console (fbcon).
-framebuffer.txt
- - introduction to frame buffer devices.
-gxfb.txt
- - info on the framebuffer driver for AMD Geode GX2 based processors.
-intel810.txt
- - documentation for the Intel 810/815 framebuffer driver.
-intelfb.txt
- - docs for Intel 830M/845G/852GM/855GM/865G/915G/945G fb driver.
-internals.txt
- - quick overview of frame buffer device internals.
-lxfb.txt
- - info on the framebuffer driver for AMD Geode LX based processors.
-matroxfb.txt
- - info on the Matrox framebuffer driver for Alpha, Intel and PPC.
-metronomefb.txt
- - info on the driver for the Metronome display controller.
-modedb.txt
- - info on the video mode database.
-pvr2fb.txt
- - info on the PowerVR 2 frame buffer driver.
-pxafb.txt
- - info on the driver for the PXA25x LCD controller.
-s3fb.txt
- - info on the fbdev driver for S3 Trio/Virge chips.
-sa1100fb.txt
- - information about the driver for the SA-1100 LCD controller.
-sh7760fb.txt
- - info on the SH7760/SH7763 integrated LCDC Framebuffer driver.
-sisfb.txt
- - info on the framebuffer device driver for various SiS chips.
-sm501.txt
- - info on the framebuffer device driver for sm501 videoframebuffer.
-sstfb.txt
- - info on the frame buffer driver for 3dfx' Voodoo Graphics boards.
-tgafb.txt
- - info on the TGA (DECChip 21030) frame buffer driver.
-tridentfb.txt
- info on the framebuffer driver for some Trident chip based cards.
-udlfb.txt
- - Driver for DisplayLink USB 2.0 chips.
-uvesafb.txt
- - info on the userspace VESA (VBE2+ compliant) frame buffer device.
-vesafb.txt
- - info on the VESA frame buffer device.
-viafb.modes
- - list of modes for VIA Integration Graphic Chip.
-viafb.txt
- - info on the VIA Integration Graphic Chip console framebuffer driver.
-vt8623fb.txt
- - info on the fb driver for the graphics core in VIA VT8623 chipsets.
diff --git a/Documentation/fb/uvesafb.txt b/Documentation/fb/uvesafb.txt
index f6362d88763b..aa924196c366 100644
--- a/Documentation/fb/uvesafb.txt
+++ b/Documentation/fb/uvesafb.txt
@@ -15,7 +15,8 @@ than x86. Check the v86d documentation for a list of currently supported
arches.
v86d source code can be downloaded from the following website:
- http://dev.gentoo.org/~spock/projects/uvesafb
+
+ https://github.com/mjanusz/v86d
Please refer to the v86d documentation for detailed configuration and
installation instructions.
@@ -177,7 +178,7 @@ from the Video BIOS if you set pixclock to 0 in fb_var_screeninfo.
--
Michal Januszewski <spock@gentoo.org>
- Last updated: 2009-03-30
+ Last updated: 2017-10-10
Documentation of the uvesafb options is loosely based on vesafb.txt.
diff --git a/Documentation/fb/vesafb.txt b/Documentation/fb/vesafb.txt
index 950d5a658cb3..413bb73235be 100644
--- a/Documentation/fb/vesafb.txt
+++ b/Documentation/fb/vesafb.txt
@@ -114,11 +114,11 @@ to turn it on.
You can pass options to vesafb using "video=vesafb:option" on
the kernel command line. Multiple options should be separated
-by comma, like this: "video=vesafb:ypan,invers"
+by comma, like this: "video=vesafb:ypan,inverse"
Accepted options:
-invers no comment...
+inverse use inverse color map
ypan enable display panning using the VESA protected mode
interface. The visible screen is just a window of the
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
deleted file mode 100644
index 0937bade1099..000000000000
--- a/Documentation/filesystems/00-INDEX
+++ /dev/null
@@ -1,153 +0,0 @@
-00-INDEX
- - this file (info on some of the filesystems supported by linux).
-Locking
- - info on locking rules as they pertain to Linux VFS.
-9p.txt
- - 9p (v9fs) is an implementation of the Plan 9 remote fs protocol.
-adfs.txt
- - info and mount options for the Acorn Advanced Disc Filing System.
-afs.txt
- - info and examples for the distributed AFS (Andrew File System) fs.
-affs.txt
- - info and mount options for the Amiga Fast File System.
-autofs-mount-control.txt
- - info on device control operations for autofs module.
-automount-support.txt
- - information about filesystem automount support.
-befs.txt
- - information about the BeOS filesystem for Linux.
-bfs.txt
- - info for the SCO UnixWare Boot Filesystem (BFS).
-btrfs.txt
- - info for the BTRFS filesystem.
-caching/
- - directory containing filesystem cache documentation.
-ceph.txt
- - info for the Ceph Distributed File System.
-cifs/
- - directory containing CIFS filesystem documentation and example code.
-coda.txt
- - description of the CODA filesystem.
-configfs/
- - directory containing configfs documentation and example code.
-cramfs.txt
- - info on the cram filesystem for small storage (ROMs etc).
-dax.txt
- - info on avoiding the page cache for files stored on CPU-addressable
- storage devices.
-debugfs.txt
- - info on the debugfs filesystem.
-devpts.txt
- - info on the devpts filesystem.
-directory-locking
- - info about the locking scheme used for directory operations.
-dlmfs.txt
- - info on the userspace interface to the OCFS2 DLM.
-dnotify.txt
- - info about directory notification in Linux.
-dnotify_test.c
- - example program for dnotify.
-ecryptfs.txt
- - docs on eCryptfs: stacked cryptographic filesystem for Linux.
-efivarfs.txt
- - info for the efivarfs filesystem.
-exofs.txt
- - info, usage, mount options, design about EXOFS.
-ext2.txt
- - info, mount options and specifications for the Ext2 filesystem.
-ext3.txt
- - info, mount options and specifications for the Ext3 filesystem.
-ext4.txt
- - info, mount options and specifications for the Ext4 filesystem.
-f2fs.txt
- - info and mount options for the F2FS filesystem.
-fiemap.txt
- - info on fiemap ioctl.
-files.txt
- - info on file management in the Linux kernel.
-fuse.txt
- - info on the Filesystem in User SpacE including mount options.
-gfs2-glocks.txt
- - info on the Global File System 2 - Glock internal locking rules.
-gfs2-uevents.txt
- - info on the Global File System 2 - uevents.
-gfs2.txt
- - info on the Global File System 2.
-hfs.txt
- - info on the Macintosh HFS Filesystem for Linux.
-hfsplus.txt
- - info on the Macintosh HFSPlus Filesystem for Linux.
-hpfs.txt
- - info and mount options for the OS/2 HPFS.
-inotify.txt
- - info on the powerful yet simple file change notification system.
-isofs.txt
- - info and mount options for the ISO 9660 (CDROM) filesystem.
-jfs.txt
- - info and mount options for the JFS filesystem.
-locks.txt
- - info on file locking implementations, flock() vs. fcntl(), etc.
-mandatory-locking.txt
- - info on the Linux implementation of Sys V mandatory file locking.
-nfs/
- - nfs-related documentation.
-nilfs2.txt
- - info and mount options for the NILFS2 filesystem.
-ntfs.txt
- - info and mount options for the NTFS filesystem (Windows NT).
-ocfs2.txt
- - info and mount options for the OCFS2 clustered filesystem.
-omfs.txt
- - info on the Optimized MPEG FileSystem.
-path-lookup.txt
- - info on path walking and name lookup locking.
-pohmelfs/
- - directory containing pohmelfs filesystem documentation.
-porting
- - various information on filesystem porting.
-proc.txt
- - info on Linux's /proc filesystem.
-qnx6.txt
- - info on the QNX6 filesystem.
-quota.txt
- - info on Quota subsystem.
-ramfs-rootfs-initramfs.txt
- - info on the 'in memory' filesystems ramfs, rootfs and initramfs.
-relay.txt
- - info on relay, for efficient streaming from kernel to user space.
-romfs.txt
- - description of the ROMFS filesystem.
-seq_file.txt
- - how to use the seq_file API.
-sharedsubtree.txt
- - a description of shared subtrees for namespaces.
-spufs.txt
- - info and mount options for the SPU filesystem used on Cell.
-squashfs.txt
- - info on the squashfs filesystem.
-sysfs-pci.txt
- - info on accessing PCI device resources through sysfs.
-sysfs-tagging.txt
- - info on sysfs tagging to avoid duplicates.
-sysfs.txt
- - info on sysfs, a ram-based filesystem for exporting kernel objects.
-sysv-fs.txt
- - info on the SystemV/V7/Xenix/Coherent filesystem.
-tmpfs.txt
- - info on tmpfs, a filesystem that holds all files in virtual memory.
-ubifs.txt
- - info on the Unsorted Block Images FileSystem.
-udf.txt
- - info and mount options for the UDF filesystem.
-ufs.txt
- - info on the ufs filesystem.
-vfat.txt
- - info on using the VFAT filesystem used in Windows NT and Windows 95.
-vfs.txt
- - overview of the Virtual File System.
-xfs-delayed-logging-design.txt
- - info on the XFS Delayed Logging Design.
-xfs-self-describing-metadata.txt
- - info on XFS Self Describing Metadata.
-xfs.txt
- - info and mount options for the XFS filesystem.
diff --git a/Documentation/filesystems/ceph.txt b/Documentation/filesystems/ceph.txt
index 8bf62240e10d..1177052701e1 100644
--- a/Documentation/filesystems/ceph.txt
+++ b/Documentation/filesystems/ceph.txt
@@ -151,6 +151,11 @@ Mount Options
Report overall filesystem usage in statfs instead of using the root
directory quota.
+ nocopyfrom
+ Don't use the RADOS 'copy-from' operation to perform remote object
+ copies. Currently, it's only used in copy_file_range, which will revert
+ to the default VFS implementation if this option is used.
+
More Information
================
diff --git a/Documentation/filesystems/dax.txt b/Documentation/filesystems/dax.txt
index 70cb68bed2e8..bc393e0a22b8 100644
--- a/Documentation/filesystems/dax.txt
+++ b/Documentation/filesystems/dax.txt
@@ -75,7 +75,7 @@ exposure of uninitialized data through mmap.
These filesystems may be used for inspiration:
- ext2: see Documentation/filesystems/ext2.txt
-- ext4: see Documentation/filesystems/ext4.txt
+- ext4: see Documentation/filesystems/ext4/ext4.rst
- xfs: see Documentation/filesystems/xfs.txt
diff --git a/Documentation/filesystems/ext2.txt b/Documentation/filesystems/ext2.txt
index 81c0becab225..a45c9fc0747b 100644
--- a/Documentation/filesystems/ext2.txt
+++ b/Documentation/filesystems/ext2.txt
@@ -358,7 +358,7 @@ and are copied into the filesystem. If a transaction is incomplete at
the time of the crash, then there is no guarantee of consistency for
the blocks in that transaction so they are discarded (which means any
filesystem changes they represent are also lost).
-Check Documentation/filesystems/ext4.txt if you want to read more about
+Check Documentation/filesystems/ext4/ext4.rst if you want to read more about
ext4 and journaling.
References
diff --git a/Documentation/filesystems/ext4/ondisk/about.rst b/Documentation/filesystems/ext4/about.rst
index 0aadba052264..0aadba052264 100644
--- a/Documentation/filesystems/ext4/ondisk/about.rst
+++ b/Documentation/filesystems/ext4/about.rst
diff --git a/Documentation/filesystems/ext4/ondisk/allocators.rst b/Documentation/filesystems/ext4/allocators.rst
index 7aa85152ace3..7aa85152ace3 100644
--- a/Documentation/filesystems/ext4/ondisk/allocators.rst
+++ b/Documentation/filesystems/ext4/allocators.rst
diff --git a/Documentation/filesystems/ext4/ondisk/attributes.rst b/Documentation/filesystems/ext4/attributes.rst
index 0b01b67b81fe..54386a010a8d 100644
--- a/Documentation/filesystems/ext4/ondisk/attributes.rst
+++ b/Documentation/filesystems/ext4/attributes.rst
@@ -30,7 +30,7 @@ Extended attributes, when stored after the inode, have a header
``ext4_xattr_ibody_header`` that is 4 bytes long:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -47,7 +47,7 @@ The beginning of an extended attribute block is in
``struct ext4_xattr_header``, which is 32 bytes long:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -92,7 +92,7 @@ entries must be stored in sorted order. The sort order is
Attributes stored inside an inode do not need be stored in sorted order.
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -157,7 +157,7 @@ attribute name index field is set, and matching string is removed from
the key name. Here is a map of name index values to key prefixes:
.. list-table::
- :widths: 1 79
+ :widths: 16 64
:header-rows: 1
* - Name Index
diff --git a/Documentation/filesystems/ext4/ondisk/bigalloc.rst b/Documentation/filesystems/ext4/bigalloc.rst
index c6d88557553c..c6d88557553c 100644
--- a/Documentation/filesystems/ext4/ondisk/bigalloc.rst
+++ b/Documentation/filesystems/ext4/bigalloc.rst
diff --git a/Documentation/filesystems/ext4/ondisk/bitmaps.rst b/Documentation/filesystems/ext4/bitmaps.rst
index c7546dbc197a..c7546dbc197a 100644
--- a/Documentation/filesystems/ext4/ondisk/bitmaps.rst
+++ b/Documentation/filesystems/ext4/bitmaps.rst
diff --git a/Documentation/filesystems/ext4/ondisk/blockgroup.rst b/Documentation/filesystems/ext4/blockgroup.rst
index baf888e4c06a..baf888e4c06a 100644
--- a/Documentation/filesystems/ext4/ondisk/blockgroup.rst
+++ b/Documentation/filesystems/ext4/blockgroup.rst
diff --git a/Documentation/filesystems/ext4/ondisk/blockmap.rst b/Documentation/filesystems/ext4/blockmap.rst
index 30e25750d88a..30e25750d88a 100644
--- a/Documentation/filesystems/ext4/ondisk/blockmap.rst
+++ b/Documentation/filesystems/ext4/blockmap.rst
diff --git a/Documentation/filesystems/ext4/ondisk/blocks.rst b/Documentation/filesystems/ext4/blocks.rst
index 73d4dc0f7bda..73d4dc0f7bda 100644
--- a/Documentation/filesystems/ext4/ondisk/blocks.rst
+++ b/Documentation/filesystems/ext4/blocks.rst
diff --git a/Documentation/filesystems/ext4/ondisk/checksums.rst b/Documentation/filesystems/ext4/checksums.rst
index 9d6a793b2e03..5519e253810d 100644
--- a/Documentation/filesystems/ext4/ondisk/checksums.rst
+++ b/Documentation/filesystems/ext4/checksums.rst
@@ -28,7 +28,7 @@ of checksum. The checksum function is whatever the superblock describes
(crc32c as of October 2013) unless noted otherwise.
.. list-table::
- :widths: 1 1 4
+ :widths: 20 8 50
:header-rows: 1
* - Metadata
diff --git a/Documentation/filesystems/ext4/ondisk/directory.rst b/Documentation/filesystems/ext4/directory.rst
index 8fcba68c2884..614034e24669 100644
--- a/Documentation/filesystems/ext4/ondisk/directory.rst
+++ b/Documentation/filesystems/ext4/directory.rst
@@ -34,7 +34,7 @@ is at most 263 bytes long, though on disk you'll need to reference
``dirent.rec_len`` to know for sure.
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -66,7 +66,7 @@ tree traversal. This format is ``ext4_dir_entry_2``, which is at most
``dirent.rec_len`` to know for sure.
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -99,7 +99,7 @@ tree traversal. This format is ``ext4_dir_entry_2``, which is at most
The directory file type is one of the following values:
.. list-table::
- :widths: 1 79
+ :widths: 16 64
:header-rows: 1
* - Value
@@ -130,7 +130,7 @@ in the place where the name normally goes. The structure is
``struct ext4_dir_entry_tail``:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -212,7 +212,7 @@ The root of the htree is in ``struct dx_root``, which is the full length
of a data block:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -305,7 +305,7 @@ of a data block:
The directory hash is one of the following values:
.. list-table::
- :widths: 1 79
+ :widths: 16 64
:header-rows: 1
* - Value
@@ -327,7 +327,7 @@ Interior nodes of an htree are recorded as ``struct dx_node``, which is
also the full length of a data block:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -375,7 +375,7 @@ The hash maps that exist in both ``struct dx_root`` and
long:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -405,7 +405,7 @@ directory index (which will ensure that there's space for the checksum.
The dx\_tail structure is 8 bytes long and looks like this:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
diff --git a/Documentation/filesystems/ext4/ondisk/dynamic.rst b/Documentation/filesystems/ext4/dynamic.rst
index bb0c84333341..bb0c84333341 100644
--- a/Documentation/filesystems/ext4/ondisk/dynamic.rst
+++ b/Documentation/filesystems/ext4/dynamic.rst
diff --git a/Documentation/filesystems/ext4/ondisk/eainode.rst b/Documentation/filesystems/ext4/eainode.rst
index ecc0d01a0a72..ecc0d01a0a72 100644
--- a/Documentation/filesystems/ext4/ondisk/eainode.rst
+++ b/Documentation/filesystems/ext4/eainode.rst
diff --git a/Documentation/filesystems/ext4/ext4.rst b/Documentation/filesystems/ext4/ext4.rst
deleted file mode 100644
index 9d4368d591fa..000000000000
--- a/Documentation/filesystems/ext4/ext4.rst
+++ /dev/null
@@ -1,613 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-========================
-General Information
-========================
-
-Ext4 is an advanced level of the ext3 filesystem which incorporates
-scalability and reliability enhancements for supporting large filesystems
-(64 bit) in keeping with increasing disk capacities and state-of-the-art
-feature requirements.
-
-Mailing list: linux-ext4@vger.kernel.org
-Web site: http://ext4.wiki.kernel.org
-
-
-Quick usage instructions
-========================
-
-Note: More extensive information for getting started with ext4 can be
-found at the ext4 wiki site at the URL:
-http://ext4.wiki.kernel.org/index.php/Ext4_Howto
-
- - The latest version of e2fsprogs can be found at:
-
- https://www.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/
-
- or
-
- http://sourceforge.net/project/showfiles.php?group_id=2406
-
- or grab the latest git repository from:
-
- https://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git
-
- - Create a new filesystem using the ext4 filesystem type:
-
- # mke2fs -t ext4 /dev/hda1
-
- Or to configure an existing ext3 filesystem to support extents:
-
- # tune2fs -O extents /dev/hda1
-
- If the filesystem was created with 128 byte inodes, it can be
- converted to use 256 byte for greater efficiency via:
-
- # tune2fs -I 256 /dev/hda1
-
- - Mounting:
-
- # mount -t ext4 /dev/hda1 /wherever
-
- - When comparing performance with other filesystems, it's always
- important to try multiple workloads; very often a subtle change in a
- workload parameter can completely change the ranking of which
- filesystems do well compared to others. When comparing versus ext3,
- note that ext4 enables write barriers by default, while ext3 does
- not enable write barriers by default. So it is useful to use
- explicitly specify whether barriers are enabled or not when via the
- '-o barriers=[0|1]' mount option for both ext3 and ext4 filesystems
- for a fair comparison. When tuning ext3 for best benchmark numbers,
- it is often worthwhile to try changing the data journaling mode; '-o
- data=writeback' can be faster for some workloads. (Note however that
- running mounted with data=writeback can potentially leave stale data
- exposed in recently written files in case of an unclean shutdown,
- which could be a security exposure in some situations.) Configuring
- the filesystem with a large journal can also be helpful for
- metadata-intensive workloads.
-
-Features
-========
-
-Currently Available
--------------------
-
-* ability to use filesystems > 16TB (e2fsprogs support not available yet)
-* extent format reduces metadata overhead (RAM, IO for access, transactions)
-* extent format more robust in face of on-disk corruption due to magics,
-* internal redundancy in tree
-* improved file allocation (multi-block alloc)
-* lift 32000 subdirectory limit imposed by i_links_count[1]
-* nsec timestamps for mtime, atime, ctime, create time
-* inode version field on disk (NFSv4, Lustre)
-* reduced e2fsck time via uninit_bg feature
-* journal checksumming for robustness, performance
-* persistent file preallocation (e.g for streaming media, databases)
-* ability to pack bitmaps and inode tables into larger virtual groups via the
- flex_bg feature
-* large file support
-* inode allocation using large virtual block groups via flex_bg
-* delayed allocation
-* large block (up to pagesize) support
-* efficient new ordered mode in JBD2 and ext4 (avoid using buffer head to force
- the ordering)
-
-[1] Filesystems with a block size of 1k may see a limit imposed by the
-directory hash tree having a maximum depth of two.
-
-Options
-=======
-
-When mounting an ext4 filesystem, the following option are accepted:
-(*) == default
-
-======================= =======================================================
-Mount Option Description
-======================= =======================================================
-ro Mount filesystem read only. Note that ext4 will
- replay the journal (and thus write to the
- partition) even when mounted "read only". The
- mount options "ro,noload" can be used to prevent
- writes to the filesystem.
-
-journal_checksum Enable checksumming of the journal transactions.
- This will allow the recovery code in e2fsck and the
- kernel to detect corruption in the kernel. It is a
- compatible change and will be ignored by older kernels.
-
-journal_async_commit Commit block can be written to disk without waiting
- for descriptor blocks. If enabled older kernels cannot
- mount the device. This will enable 'journal_checksum'
- internally.
-
-journal_path=path
-journal_dev=devnum When the external journal device's major/minor numbers
- have changed, these options allow the user to specify
- the new journal location. The journal device is
- identified through either its new major/minor numbers
- encoded in devnum, or via a path to the device.
-
-norecovery Don't load the journal on mounting. Note that
-noload if the filesystem was not unmounted cleanly,
- skipping the journal replay will lead to the
- filesystem containing inconsistencies that can
- lead to any number of problems.
-
-data=journal All data are committed into the journal prior to being
- written into the main file system. Enabling
- this mode will disable delayed allocation and
- O_DIRECT support.
-
-data=ordered (*) All data are forced directly out to the main file
- system prior to its metadata being committed to the
- journal.
-
-data=writeback Data ordering is not preserved, data may be written
- into the main file system after its metadata has been
- committed to the journal.
-
-commit=nrsec (*) Ext4 can be told to sync all its data and metadata
- every 'nrsec' seconds. The default value is 5 seconds.
- This means that if you lose your power, you will lose
- as much as the latest 5 seconds of work (your
- filesystem will not be damaged though, thanks to the
- journaling). This default value (or any low value)
- will hurt performance, but it's good for data-safety.
- Setting it to 0 will have the same effect as leaving
- it at the default (5 seconds).
- Setting it to very large values will improve
- performance.
-
-barrier=<0|1(*)> This enables/disables the use of write barriers in
-barrier(*) the jbd code. barrier=0 disables, barrier=1 enables.
-nobarrier This also requires an IO stack which can support
- barriers, and if jbd gets an error on a barrier
- write, it will disable again with a warning.
- Write barriers enforce proper on-disk ordering
- of journal commits, making volatile disk write caches
- safe to use, at some performance penalty. If
- your disks are battery-backed in one way or another,
- disabling barriers may safely improve performance.
- The mount options "barrier" and "nobarrier" can
- also be used to enable or disable barriers, for
- consistency with other ext4 mount options.
-
-inode_readahead_blks=n This tuning parameter controls the maximum
- number of inode table blocks that ext4's inode
- table readahead algorithm will pre-read into
- the buffer cache. The default value is 32 blocks.
-
-nouser_xattr Disables Extended User Attributes. See the
- attr(5) manual page for more information about
- extended attributes.
-
-noacl This option disables POSIX Access Control List
- support. If ACL support is enabled in the kernel
- configuration (CONFIG_EXT4_FS_POSIX_ACL), ACL is
- enabled by default on mount. See the acl(5) manual
- page for more information about acl.
-
-bsddf (*) Make 'df' act like BSD.
-minixdf Make 'df' act like Minix.
-
-debug Extra debugging information is sent to syslog.
-
-abort Simulate the effects of calling ext4_abort() for
- debugging purposes. This is normally used while
- remounting a filesystem which is already mounted.
-
-errors=remount-ro Remount the filesystem read-only on an error.
-errors=continue Keep going on a filesystem error.
-errors=panic Panic and halt the machine if an error occurs.
- (These mount options override the errors behavior
- specified in the superblock, which can be configured
- using tune2fs)
-
-data_err=ignore(*) Just print an error message if an error occurs
- in a file data buffer in ordered mode.
-data_err=abort Abort the journal if an error occurs in a file
- data buffer in ordered mode.
-
-grpid New objects have the group ID of their parent.
-bsdgroups
-
-nogrpid (*) New objects have the group ID of their creator.
-sysvgroups
-
-resgid=n The group ID which may use the reserved blocks.
-
-resuid=n The user ID which may use the reserved blocks.
-
-sb=n Use alternate superblock at this location.
-
-quota These options are ignored by the filesystem. They
-noquota are used only by quota tools to recognize volumes
-grpquota where quota should be turned on. See documentation
-usrquota in the quota-tools package for more details
- (http://sourceforge.net/projects/linuxquota).
-
-jqfmt=<quota type> These options tell filesystem details about quota
-usrjquota=<file> so that quota information can be properly updated
-grpjquota=<file> during journal replay. They replace the above
- quota options. See documentation in the quota-tools
- package for more details
- (http://sourceforge.net/projects/linuxquota).
-
-stripe=n Number of filesystem blocks that mballoc will try
- to use for allocation size and alignment. For RAID5/6
- systems this should be the number of data
- disks * RAID chunk size in file system blocks.
-
-delalloc (*) Defer block allocation until just before ext4
- writes out the block(s) in question. This
- allows ext4 to better allocation decisions
- more efficiently.
-nodelalloc Disable delayed allocation. Blocks are allocated
- when the data is copied from userspace to the
- page cache, either via the write(2) system call
- or when an mmap'ed page which was previously
- unallocated is written for the first time.
-
-max_batch_time=usec Maximum amount of time ext4 should wait for
- additional filesystem operations to be batch
- together with a synchronous write operation.
- Since a synchronous write operation is going to
- force a commit and then a wait for the I/O
- complete, it doesn't cost much, and can be a
- huge throughput win, we wait for a small amount
- of time to see if any other transactions can
- piggyback on the synchronous write. The
- algorithm used is designed to automatically tune
- for the speed of the disk, by measuring the
- amount of time (on average) that it takes to
- finish committing a transaction. Call this time
- the "commit time". If the time that the
- transaction has been running is less than the
- commit time, ext4 will try sleeping for the
- commit time to see if other operations will join
- the transaction. The commit time is capped by
- the max_batch_time, which defaults to 15000us
- (15ms). This optimization can be turned off
- entirely by setting max_batch_time to 0.
-
-min_batch_time=usec This parameter sets the commit time (as
- described above) to be at least min_batch_time.
- It defaults to zero microseconds. Increasing
- this parameter may improve the throughput of
- multi-threaded, synchronous workloads on very
- fast disks, at the cost of increasing latency.
-
-journal_ioprio=prio The I/O priority (from 0 to 7, where 0 is the
- highest priority) which should be used for I/O
- operations submitted by kjournald2 during a
- commit operation. This defaults to 3, which is
- a slightly higher priority than the default I/O
- priority.
-
-auto_da_alloc(*) Many broken applications don't use fsync() when
-noauto_da_alloc replacing existing files via patterns such as
- fd = open("foo.new")/write(fd,..)/close(fd)/
- rename("foo.new", "foo"), or worse yet,
- fd = open("foo", O_TRUNC)/write(fd,..)/close(fd).
- If auto_da_alloc is enabled, ext4 will detect
- the replace-via-rename and replace-via-truncate
- patterns and force that any delayed allocation
- blocks are allocated such that at the next
- journal commit, in the default data=ordered
- mode, the data blocks of the new file are forced
- to disk before the rename() operation is
- committed. This provides roughly the same level
- of guarantees as ext3, and avoids the
- "zero-length" problem that can happen when a
- system crashes before the delayed allocation
- blocks are forced to disk.
-
-noinit_itable Do not initialize any uninitialized inode table
- blocks in the background. This feature may be
- used by installation CD's so that the install
- process can complete as quickly as possible; the
- inode table initialization process would then be
- deferred until the next time the file system
- is unmounted.
-
-init_itable=n The lazy itable init code will wait n times the
- number of milliseconds it took to zero out the
- previous block group's inode table. This
- minimizes the impact on the system performance
- while file system's inode table is being initialized.
-
-discard Controls whether ext4 should issue discard/TRIM
-nodiscard(*) commands to the underlying block device when
- blocks are freed. This is useful for SSD devices
- and sparse/thinly-provisioned LUNs, but it is off
- by default until sufficient testing has been done.
-
-nouid32 Disables 32-bit UIDs and GIDs. This is for
- interoperability with older kernels which only
- store and expect 16-bit values.
-
-block_validity(*) These options enable or disable the in-kernel
-noblock_validity facility for tracking filesystem metadata blocks
- within internal data structures. This allows multi-
- block allocator and other routines to notice
- bugs or corrupted allocation bitmaps which cause
- blocks to be allocated which overlap with
- filesystem metadata blocks.
-
-dioread_lock Controls whether or not ext4 should use the DIO read
-dioread_nolock locking. If the dioread_nolock option is specified
- ext4 will allocate uninitialized extent before buffer
- write and convert the extent to initialized after IO
- completes. This approach allows ext4 code to avoid
- using inode mutex, which improves scalability on high
- speed storages. However this does not work with
- data journaling and dioread_nolock option will be
- ignored with kernel warning. Note that dioread_nolock
- code path is only used for extent-based files.
- Because of the restrictions this options comprises
- it is off by default (e.g. dioread_lock).
-
-max_dir_size_kb=n This limits the size of directories so that any
- attempt to expand them beyond the specified
- limit in kilobytes will cause an ENOSPC error.
- This is useful in memory constrained
- environments, where a very large directory can
- cause severe performance problems or even
- provoke the Out Of Memory killer. (For example,
- if there is only 512mb memory available, a 176mb
- directory may seriously cramp the system's style.)
-
-i_version Enable 64-bit inode version support. This option is
- off by default.
-
-dax Use direct access (no page cache). See
- Documentation/filesystems/dax.txt. Note that
- this option is incompatible with data=journal.
-======================= =======================================================
-
-Data Mode
-=========
-There are 3 different data modes:
-
-* writeback mode
-
- In data=writeback mode, ext4 does not journal data at all. This mode provides
- a similar level of journaling as that of XFS, JFS, and ReiserFS in its default
- mode - metadata journaling. A crash+recovery can cause incorrect data to
- appear in files which were written shortly before the crash. This mode will
- typically provide the best ext4 performance.
-
-* ordered mode
-
- In data=ordered mode, ext4 only officially journals metadata, but it logically
- groups metadata information related to data changes with the data blocks into
- a single unit called a transaction. When it's time to write the new metadata
- out to disk, the associated data blocks are written first. In general, this
- mode performs slightly slower than writeback but significantly faster than
- journal mode.
-
-* journal mode
-
- data=journal mode provides full data and metadata journaling. All new data is
- written to the journal first, and then to its final location. In the event of
- a crash, the journal can be replayed, bringing both data and metadata into a
- consistent state. This mode is the slowest except when data needs to be read
- from and written to disk at the same time where it outperforms all others
- modes. Enabling this mode will disable delayed allocation and O_DIRECT
- support.
-
-/proc entries
-=============
-
-Information about mounted ext4 file systems can be found in
-/proc/fs/ext4. Each mounted filesystem will have a directory in
-/proc/fs/ext4 based on its device name (i.e., /proc/fs/ext4/hdc or
-/proc/fs/ext4/dm-0). The files in each per-device directory are shown
-in table below.
-
-Files in /proc/fs/ext4/<devname>
-
-================ =======
- File Content
-================ =======
- mb_groups details of multiblock allocator buddy cache of free blocks
-================ =======
-
-/sys entries
-============
-
-Information about mounted ext4 file systems can be found in
-/sys/fs/ext4. Each mounted filesystem will have a directory in
-/sys/fs/ext4 based on its device name (i.e., /sys/fs/ext4/hdc or
-/sys/fs/ext4/dm-0). The files in each per-device directory are shown
-in table below.
-
-Files in /sys/fs/ext4/<devname>:
-
-(see also Documentation/ABI/testing/sysfs-fs-ext4)
-
-============================= =================================================
-File Content
-============================= =================================================
- delayed_allocation_blocks This file is read-only and shows the number of
- blocks that are dirty in the page cache, but
- which do not have their location in the
- filesystem allocated yet.
-
-inode_goal Tuning parameter which (if non-zero) controls
- the goal inode used by the inode allocator in
- preference to all other allocation heuristics.
- This is intended for debugging use only, and
- should be 0 on production systems.
-
-inode_readahead_blks Tuning parameter which controls the maximum
- number of inode table blocks that ext4's inode
- table readahead algorithm will pre-read into
- the buffer cache
-
-lifetime_write_kbytes This file is read-only and shows the number of
- kilobytes of data that have been written to this
- filesystem since it was created.
-
- max_writeback_mb_bump The maximum number of megabytes the writeback
- code will try to write out before move on to
- another inode.
-
- mb_group_prealloc The multiblock allocator will round up allocation
- requests to a multiple of this tuning parameter if
- the stripe size is not set in the ext4 superblock
-
- mb_max_to_scan The maximum number of extents the multiblock
- allocator will search to find the best extent
-
- mb_min_to_scan The minimum number of extents the multiblock
- allocator will search to find the best extent
-
- mb_order2_req Tuning parameter which controls the minimum size
- for requests (as a power of 2) where the buddy
- cache is used
-
- mb_stats Controls whether the multiblock allocator should
- collect statistics, which are shown during the
- unmount. 1 means to collect statistics, 0 means
- not to collect statistics
-
- mb_stream_req Files which have fewer blocks than this tunable
- parameter will have their blocks allocated out
- of a block group specific preallocation pool, so
- that small files are packed closely together.
- Each large file will have its blocks allocated
- out of its own unique preallocation pool.
-
- session_write_kbytes This file is read-only and shows the number of
- kilobytes of data that have been written to this
- filesystem since it was mounted.
-
- reserved_clusters This is RW file and contains number of reserved
- clusters in the file system which will be used
- in the specific situations to avoid costly
- zeroout, unexpected ENOSPC, or possible data
- loss. The default is 2% or 4096 clusters,
- whichever is smaller and this can be changed
- however it can never exceed number of clusters
- in the file system. If there is not enough space
- for the reserved space when mounting the file
- mount will _not_ fail.
-============================= =================================================
-
-Ioctls
-======
-
-There is some Ext4 specific functionality which can be accessed by applications
-through the system call interfaces. The list of all Ext4 specific ioctls are
-shown in the table below.
-
-Table of Ext4 specific ioctls
-
-============================= =================================================
-Ioctl Description
-============================= =================================================
- EXT4_IOC_GETFLAGS Get additional attributes associated with inode.
- The ioctl argument is an integer bitfield, with
- bit values described in ext4.h. This ioctl is an
- alias for FS_IOC_GETFLAGS.
-
- EXT4_IOC_SETFLAGS Set additional attributes associated with inode.
- The ioctl argument is an integer bitfield, with
- bit values described in ext4.h. This ioctl is an
- alias for FS_IOC_SETFLAGS.
-
- EXT4_IOC_GETVERSION
- EXT4_IOC_GETVERSION_OLD
- Get the inode i_generation number stored for
- each inode. The i_generation number is normally
- changed only when new inode is created and it is
- particularly useful for network filesystems. The
- '_OLD' version of this ioctl is an alias for
- FS_IOC_GETVERSION.
-
- EXT4_IOC_SETVERSION
- EXT4_IOC_SETVERSION_OLD
- Set the inode i_generation number stored for
- each inode. The '_OLD' version of this ioctl
- is an alias for FS_IOC_SETVERSION.
-
- EXT4_IOC_GROUP_EXTEND This ioctl has the same purpose as the resize
- mount option. It allows to resize filesystem
- to the end of the last existing block group,
- further resize has to be done with resize2fs,
- either online, or offline. The argument points
- to the unsigned logn number representing the
- filesystem new block count.
-
- EXT4_IOC_MOVE_EXT Move the block extents from orig_fd (the one
- this ioctl is pointing to) to the donor_fd (the
- one specified in move_extent structure passed
- as an argument to this ioctl). Then, exchange
- inode metadata between orig_fd and donor_fd.
- This is especially useful for online
- defragmentation, because the allocator has the
- opportunity to allocate moved blocks better,
- ideally into one contiguous extent.
-
- EXT4_IOC_GROUP_ADD Add a new group descriptor to an existing or
- new group descriptor block. The new group
- descriptor is described by ext4_new_group_input
- structure, which is passed as an argument to
- this ioctl. This is especially useful in
- conjunction with EXT4_IOC_GROUP_EXTEND,
- which allows online resize of the filesystem
- to the end of the last existing block group.
- Those two ioctls combined is used in userspace
- online resize tool (e.g. resize2fs).
-
- EXT4_IOC_MIGRATE This ioctl operates on the filesystem itself.
- It converts (migrates) ext3 indirect block mapped
- inode to ext4 extent mapped inode by walking
- through indirect block mapping of the original
- inode and converting contiguous block ranges
- into ext4 extents of the temporary inode. Then,
- inodes are swapped. This ioctl might help, when
- migrating from ext3 to ext4 filesystem, however
- suggestion is to create fresh ext4 filesystem
- and copy data from the backup. Note, that
- filesystem has to support extents for this ioctl
- to work.
-
- EXT4_IOC_ALLOC_DA_BLKS Force all of the delay allocated blocks to be
- allocated to preserve application-expected ext3
- behaviour. Note that this will also start
- triggering a write of the data blocks, but this
- behaviour may change in the future as it is
- not necessary and has been done this way only
- for sake of simplicity.
-
- EXT4_IOC_RESIZE_FS Resize the filesystem to a new size. The number
- of blocks of resized filesystem is passed in via
- 64 bit integer argument. The kernel allocates
- bitmaps and inode table, the userspace tool thus
- just passes the new number of blocks.
-
- EXT4_IOC_SWAP_BOOT Swap i_blocks and associated attributes
- (like i_blocks, i_size, i_flags, ...) from
- the specified inode with inode
- EXT4_BOOT_LOADER_INO (#5). This is typically
- used to store a boot loader in a secure part of
- the filesystem, where it can't be changed by a
- normal user by accident.
- The data blocks of the previous boot loader
- will be associated with the given inode.
-============================= =================================================
-
-References
-==========
-
-kernel source: <file:fs/ext4/>
- <file:fs/jbd2/>
-
-programs: http://e2fsprogs.sourceforge.net/
-
-useful links: http://fedoraproject.org/wiki/ext3-devel
- http://www.bullopensource.org/ext4/
- http://ext4.wiki.kernel.org/index.php/Main_Page
- http://fedoraproject.org/wiki/Features/Ext4
diff --git a/Documentation/filesystems/ext4/ondisk/globals.rst b/Documentation/filesystems/ext4/globals.rst
index 368bf7662b96..368bf7662b96 100644
--- a/Documentation/filesystems/ext4/ondisk/globals.rst
+++ b/Documentation/filesystems/ext4/globals.rst
diff --git a/Documentation/filesystems/ext4/ondisk/group_descr.rst b/Documentation/filesystems/ext4/group_descr.rst
index 759827e5d2cf..0f783ed88592 100644
--- a/Documentation/filesystems/ext4/ondisk/group_descr.rst
+++ b/Documentation/filesystems/ext4/group_descr.rst
@@ -43,7 +43,7 @@ entire bitmap.
The block group descriptor is laid out in ``struct ext4_group_desc``.
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -157,7 +157,7 @@ The block group descriptor is laid out in ``struct ext4_group_desc``.
Block group flags can be any combination of the following:
.. list-table::
- :widths: 1 79
+ :widths: 16 64
:header-rows: 1
* - Value
diff --git a/Documentation/filesystems/ext4/ondisk/ifork.rst b/Documentation/filesystems/ext4/ifork.rst
index 5dbe3b2b121a..b9816d5a896b 100644
--- a/Documentation/filesystems/ext4/ondisk/ifork.rst
+++ b/Documentation/filesystems/ext4/ifork.rst
@@ -68,7 +68,7 @@ The extent tree header is recorded in ``struct ext4_extent_header``,
which is 12 bytes long:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -104,7 +104,7 @@ Internal nodes of the extent tree, also known as index nodes, are
recorded as ``struct ext4_extent_idx``, and are 12 bytes long:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -134,7 +134,7 @@ Leaf nodes of the extent tree are recorded as ``struct ext4_extent``,
and are also 12 bytes long:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -174,7 +174,7 @@ including) the checksum itself.
``struct ext4_extent_tail`` is 4 bytes long:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
diff --git a/Documentation/filesystems/ext4/index.rst b/Documentation/filesystems/ext4/index.rst
index 71121605558c..3be3e54d480d 100644
--- a/Documentation/filesystems/ext4/index.rst
+++ b/Documentation/filesystems/ext4/index.rst
@@ -1,17 +1,14 @@
.. SPDX-License-Identifier: GPL-2.0
-===============
-ext4 Filesystem
-===============
-
-General usage and on-disk artifacts writen by ext4. More documentation may
-be ported from the wiki as time permits. This should be considered the
-canonical source of information as the details here have been reviewed by
-the ext4 community.
+===================================
+ext4 Data Structures and Algorithms
+===================================
.. toctree::
- :maxdepth: 5
+ :maxdepth: 6
:numbered:
- ext4
- ondisk/index
+ about.rst
+ overview.rst
+ globals.rst
+ dynamic.rst
diff --git a/Documentation/filesystems/ext4/ondisk/inlinedata.rst b/Documentation/filesystems/ext4/inlinedata.rst
index d1075178ce0b..d1075178ce0b 100644
--- a/Documentation/filesystems/ext4/ondisk/inlinedata.rst
+++ b/Documentation/filesystems/ext4/inlinedata.rst
diff --git a/Documentation/filesystems/ext4/ondisk/inodes.rst b/Documentation/filesystems/ext4/inodes.rst
index 655ce898f3f5..6bd35e506b6f 100644
--- a/Documentation/filesystems/ext4/ondisk/inodes.rst
+++ b/Documentation/filesystems/ext4/inodes.rst
@@ -29,8 +29,9 @@ and the inode structure itself.
The inode table entry is laid out in ``struct ext4_inode``.
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
+ :class: longtable
* - Offset
- Size
@@ -176,7 +177,7 @@ The inode table entry is laid out in ``struct ext4_inode``.
The ``i_mode`` value is a combination of the following flags:
.. list-table::
- :widths: 1 79
+ :widths: 16 64
:header-rows: 1
* - Value
@@ -227,7 +228,7 @@ The ``i_mode`` value is a combination of the following flags:
The ``i_flags`` field is a combination of these values:
.. list-table::
- :widths: 1 79
+ :widths: 16 64
:header-rows: 1
* - Value
@@ -314,7 +315,7 @@ The ``osd1`` field has multiple meanings depending on the creator:
Linux:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -331,7 +332,7 @@ Linux:
Hurd:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -346,7 +347,7 @@ Hurd:
Masix:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -365,7 +366,7 @@ The ``osd2`` field has multiple meanings depending on the filesystem creator:
Linux:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -402,7 +403,7 @@ Linux:
Hurd:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -433,7 +434,7 @@ Hurd:
Masix:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
diff --git a/Documentation/filesystems/ext4/ondisk/journal.rst b/Documentation/filesystems/ext4/journal.rst
index e7031af86876..ea613ee701f5 100644
--- a/Documentation/filesystems/ext4/ondisk/journal.rst
+++ b/Documentation/filesystems/ext4/journal.rst
@@ -48,7 +48,7 @@ Layout
Generally speaking, the journal has this format:
.. list-table::
- :widths: 1 1 78
+ :widths: 16 48 16
:header-rows: 1
* - Superblock
@@ -76,7 +76,7 @@ The journal superblock will be in the next full block after the
superblock.
.. list-table::
- :widths: 1 1 1 1 76
+ :widths: 12 12 12 32 12
:header-rows: 1
* - 1024 bytes of padding
@@ -98,7 +98,7 @@ Every block in the journal starts with a common 12-byte header
``struct journal_header_s``:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -124,7 +124,7 @@ Every block in the journal starts with a common 12-byte header
The journal block type can be any one of:
.. list-table::
- :widths: 1 79
+ :widths: 16 64
:header-rows: 1
* - Value
@@ -154,7 +154,7 @@ The journal superblock is recorded as ``struct journal_superblock_s``,
which is 1024 bytes long:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -264,7 +264,7 @@ which is 1024 bytes long:
The journal compat features are any combination of the following:
.. list-table::
- :widths: 1 79
+ :widths: 16 64
:header-rows: 1
* - Value
@@ -278,7 +278,7 @@ The journal compat features are any combination of the following:
The journal incompat features are any combination of the following:
.. list-table::
- :widths: 1 79
+ :widths: 16 64
:header-rows: 1
* - Value
@@ -306,7 +306,7 @@ Journal checksum type codes are one of the following. crc32 or crc32c are the
most likely choices.
.. list-table::
- :widths: 1 79
+ :widths: 16 64
:header-rows: 1
* - Value
@@ -330,7 +330,7 @@ described by a data structure, but here is the block structure anyway.
Descriptor blocks consume at least 36 bytes, but use a full block:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -355,7 +355,7 @@ defined as ``struct journal_block_tag3_s``, which looks like the
following. The size is 16 or 32 bytes.
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -400,7 +400,7 @@ following. The size is 16 or 32 bytes.
The journal tag flags are any combination of the following:
.. list-table::
- :widths: 1 79
+ :widths: 16 64
:header-rows: 1
* - Value
@@ -421,7 +421,7 @@ is defined as ``struct journal_block_tag_s``, which looks like the
following. The size is 8, 12, 24, or 28 bytes:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -471,7 +471,7 @@ JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the block is a
``struct jbd2_journal_block_tail``, which looks like this:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -513,7 +513,7 @@ Revocation blocks are described in
length, but use a full block:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -543,7 +543,7 @@ JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the revocation
block is a ``struct jbd2_journal_revoke_tail``, which has this format:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -567,7 +567,7 @@ The commit block is described by ``struct commit_header``, which is 32
bytes long (but uses a full block):
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
diff --git a/Documentation/filesystems/ext4/ondisk/mmp.rst b/Documentation/filesystems/ext4/mmp.rst
index b7d7a3137f80..25660981d93c 100644
--- a/Documentation/filesystems/ext4/ondisk/mmp.rst
+++ b/Documentation/filesystems/ext4/mmp.rst
@@ -32,7 +32,7 @@ The checksum is calculated against the FS UUID and the MMP structure.
The MMP structure (``struct mmp_struct``) is as follows:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 12 20 40
:header-rows: 1
* - Offset
diff --git a/Documentation/filesystems/ext4/ondisk/index.rst b/Documentation/filesystems/ext4/ondisk/index.rst
deleted file mode 100644
index f7d082c3a435..000000000000
--- a/Documentation/filesystems/ext4/ondisk/index.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-==============================
-Data Structures and Algorithms
-==============================
-.. include:: about.rst
-.. include:: overview.rst
-.. include:: globals.rst
-.. include:: dynamic.rst
diff --git a/Documentation/filesystems/ext4/ondisk/overview.rst b/Documentation/filesystems/ext4/overview.rst
index cbab18baba12..cbab18baba12 100644
--- a/Documentation/filesystems/ext4/ondisk/overview.rst
+++ b/Documentation/filesystems/ext4/overview.rst
diff --git a/Documentation/filesystems/ext4/ondisk/special_inodes.rst b/Documentation/filesystems/ext4/special_inodes.rst
index a82f70c9baeb..9061aabba827 100644
--- a/Documentation/filesystems/ext4/ondisk/special_inodes.rst
+++ b/Documentation/filesystems/ext4/special_inodes.rst
@@ -6,7 +6,7 @@ Special inodes
ext4 reserves some inode for special features, as follows:
.. list-table::
- :widths: 1 79
+ :widths: 6 70
:header-rows: 1
* - inode Number
diff --git a/Documentation/filesystems/ext4/ondisk/super.rst b/Documentation/filesystems/ext4/super.rst
index 5f81dd87e0b9..04ff079a2acf 100644
--- a/Documentation/filesystems/ext4/ondisk/super.rst
+++ b/Documentation/filesystems/ext4/super.rst
@@ -19,7 +19,7 @@ The ext4 superblock is laid out as follows in
``struct ext4_super_block``:
.. list-table::
- :widths: 1 1 1 77
+ :widths: 8 8 24 40
:header-rows: 1
* - Offset
@@ -483,7 +483,7 @@ The ext4 superblock is laid out as follows in
The superblock state is some combination of the following:
.. list-table::
- :widths: 1 79
+ :widths: 8 72
:header-rows: 1
* - Value
@@ -500,7 +500,7 @@ The superblock state is some combination of the following:
The superblock error policy is one of the following:
.. list-table::
- :widths: 1 79
+ :widths: 8 72
:header-rows: 1
* - Value
@@ -517,7 +517,7 @@ The superblock error policy is one of the following:
The filesystem creator is one of the following:
.. list-table::
- :widths: 1 79
+ :widths: 8 72
:header-rows: 1
* - Value
@@ -538,7 +538,7 @@ The filesystem creator is one of the following:
The superblock revision is one of the following:
.. list-table::
- :widths: 1 79
+ :widths: 8 72
:header-rows: 1
* - Value
@@ -556,7 +556,7 @@ The superblock compatible features field is a combination of any of the
following:
.. list-table::
- :widths: 1 79
+ :widths: 16 64
:header-rows: 1
* - Value
@@ -595,7 +595,7 @@ The superblock incompatible features field is a combination of any of the
following:
.. list-table::
- :widths: 1 79
+ :widths: 16 64
:header-rows: 1
* - Value
@@ -647,7 +647,7 @@ The superblock read-only compatible features field is a combination of any of
the following:
.. list-table::
- :widths: 1 79
+ :widths: 16 64
:header-rows: 1
* - Value
@@ -702,7 +702,7 @@ the following:
The ``s_def_hash_version`` field is one of the following:
.. list-table::
- :widths: 1 79
+ :widths: 8 72
:header-rows: 1
* - Value
@@ -725,7 +725,7 @@ The ``s_def_hash_version`` field is one of the following:
The ``s_default_mount_opts`` field is any combination of the following:
.. list-table::
- :widths: 1 79
+ :widths: 8 72
:header-rows: 1
* - Value
@@ -767,7 +767,7 @@ The ``s_default_mount_opts`` field is any combination of the following:
The ``s_flags`` field is any combination of the following:
.. list-table::
- :widths: 1 79
+ :widths: 8 72
:header-rows: 1
* - Value
@@ -784,7 +784,7 @@ The ``s_flags`` field is any combination of the following:
The ``s_encrypt_algos`` list can contain any of the following:
.. list-table::
- :widths: 1 79
+ :widths: 8 72
:header-rows: 1
* - Value
diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt
index e5edd29687b5..e46c2147ddf8 100644
--- a/Documentation/filesystems/f2fs.txt
+++ b/Documentation/filesystems/f2fs.txt
@@ -172,9 +172,10 @@ fault_type=%d Support configuring fault injection type, should be
FAULT_DIR_DEPTH 0x000000100
FAULT_EVICT_INODE 0x000000200
FAULT_TRUNCATE 0x000000400
- FAULT_IO 0x000000800
+ FAULT_READ_IO 0x000000800
FAULT_CHECKPOINT 0x000001000
FAULT_DISCARD 0x000002000
+ FAULT_WRITE_IO 0x000004000
mode=%s Control block allocation mode which supports "adaptive"
and "lfs". In "lfs" mode, there should be no random
writes towards main area.
@@ -211,6 +212,11 @@ fsync_mode=%s Control the policy of fsync. Currently supports "posix",
non-atomic files likewise "nobarrier" mount option.
test_dummy_encryption Enable dummy encryption, which provides a fake fscrypt
context. The fake fscrypt context is used by xfstests.
+checkpoint=%s Set to "disable" to turn off checkpointing. Set to "enable"
+ to reenable checkpointing. Is enabled by default. While
+ disabled, any unmounting or unexpected shutdowns will cause
+ the filesystem contents to appear as they did when the
+ filesystem was mounted with that option.
================================================================================
DEBUGFS ENTRIES
diff --git a/Documentation/filesystems/fscrypt.rst b/Documentation/filesystems/fscrypt.rst
index 48b424de85bb..cfbc18f0d9c9 100644
--- a/Documentation/filesystems/fscrypt.rst
+++ b/Documentation/filesystems/fscrypt.rst
@@ -191,21 +191,11 @@ Currently, the following pairs of encryption modes are supported:
- AES-256-XTS for contents and AES-256-CTS-CBC for filenames
- AES-128-CBC for contents and AES-128-CTS-CBC for filenames
-- Speck128/256-XTS for contents and Speck128/256-CTS-CBC for filenames
It is strongly recommended to use AES-256-XTS for contents encryption.
AES-128-CBC was added only for low-powered embedded devices with
crypto accelerators such as CAAM or CESA that do not support XTS.
-Similarly, Speck128/256 support was only added for older or low-end
-CPUs which cannot do AES fast enough -- especially ARM CPUs which have
-NEON instructions but not the Cryptography Extensions -- and for which
-it would not otherwise be feasible to use encryption at all. It is
-not recommended to use Speck on CPUs that have AES instructions.
-Speck support is only available if it has been enabled in the crypto
-API via CONFIG_CRYPTO_SPECK. Also, on ARM platforms, to get
-acceptable performance CONFIG_CRYPTO_SPECK_NEON must be enabled.
-
New encryption modes can be added relatively easily, without changes
to individual filesystems. However, authenticated encryption (AE)
modes are not currently supported because of the difficulty of dealing
diff --git a/Documentation/filesystems/nfs/00-INDEX b/Documentation/filesystems/nfs/00-INDEX
deleted file mode 100644
index 53f3b596ac0d..000000000000
--- a/Documentation/filesystems/nfs/00-INDEX
+++ /dev/null
@@ -1,26 +0,0 @@
-00-INDEX
- - this file (nfs-related documentation).
-Exporting
- - explanation of how to make filesystems exportable.
-fault_injection.txt
- - information for using fault injection on the server
-knfsd-stats.txt
- - statistics which the NFS server makes available to user space.
-nfs.txt
- - nfs client, and DNS resolution for fs_locations.
-nfs41-server.txt
- - info on the Linux server implementation of NFSv4 minor version 1.
-nfs-rdma.txt
- - how to install and setup the Linux NFS/RDMA client and server software
-nfsd-admin-interfaces.txt
- - Administrative interfaces for nfsd.
-nfsroot.txt
- - short guide on setting up a diskless box with NFS root filesystem.
-pnfs.txt
- - short explanation of some of the internals of the pnfs client code
-rpc-cache.txt
- - introduction to the caching mechanisms in the sunrpc layer.
-idmapper.txt
- - information for configuring request-keys to be used by idmapper
-rpc-server-gss.txt
- - Information on GSS authentication support in the NFS Server
diff --git a/Documentation/filesystems/nfs/rpc-cache.txt b/Documentation/filesystems/nfs/rpc-cache.txt
index ebcaaee21616..c4dac829db0f 100644
--- a/Documentation/filesystems/nfs/rpc-cache.txt
+++ b/Documentation/filesystems/nfs/rpc-cache.txt
@@ -84,7 +84,7 @@ Creating a Cache
A message from user space has arrived to fill out a
cache entry. It is in 'buf' of length 'len'.
cache_parse should parse this, find the item in the
- cache with sunrpc_cache_lookup, and update the item
+ cache with sunrpc_cache_lookup_rcu, and update the item
with sunrpc_cache_update.
@@ -95,7 +95,7 @@ Creating a Cache
Using a cache
-------------
-To find a value in a cache, call sunrpc_cache_lookup passing a pointer
+To find a value in a cache, call sunrpc_cache_lookup_rcu passing a pointer
to the cache_head in a sample item with the 'key' fields filled in.
This will be passed to ->match to identify the target entry. If no
entry is found, a new entry will be create, added to the cache, and
@@ -116,7 +116,7 @@ item does become valid, the deferred copy of the request will be
revisited (->revisit). It is expected that this method will
reschedule the request for processing.
-The value returned by sunrpc_cache_lookup can also be passed to
+The value returned by sunrpc_cache_lookup_rcu can also be passed to
sunrpc_cache_update to set the content for the item. A second item is
passed which should hold the content. If the item found by _lookup
has valid data, then it is discarded and a new item is created. This
diff --git a/Documentation/filesystems/overlayfs.txt b/Documentation/filesystems/overlayfs.txt
index 51c136c821bf..eef7d9d259e8 100644
--- a/Documentation/filesystems/overlayfs.txt
+++ b/Documentation/filesystems/overlayfs.txt
@@ -286,6 +286,12 @@ pointed by REDIRECT. This should not be possible on local system as setting
"trusted." xattrs will require CAP_SYS_ADMIN. But it should be possible
for untrusted layers like from a pen drive.
+Note: redirect_dir={off|nofollow|follow(*)} conflicts with metacopy=on, and
+results in an error.
+
+(*) redirect_dir=follow only conflicts with metacopy=on if upperdir=... is
+given.
+
Sharing and copying layers
--------------------------
diff --git a/Documentation/filesystems/pohmelfs/design_notes.txt b/Documentation/filesystems/pohmelfs/design_notes.txt
deleted file mode 100644
index 106d17fbb05f..000000000000
--- a/Documentation/filesystems/pohmelfs/design_notes.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-POHMELFS: Parallel Optimized Host Message Exchange Layered File System.
-
- Evgeniy Polyakov <zbr@ioremap.net>
-
-Homepage: http://www.ioremap.net/projects/pohmelfs
-
-POHMELFS first began as a network filesystem with coherent local data and
-metadata caches but is now evolving into a parallel distributed filesystem.
-
-Main features of this FS include:
- * Locally coherent cache for data and metadata with (potentially) byte-range locks.
- Since all Linux filesystems lock the whole inode during writing, algorithm
- is very simple and does not use byte-ranges, although they are sent in
- locking messages.
- * Completely async processing of all events except creation of hard and symbolic
- links, and rename events.
- Object creation and data reading and writing are processed asynchronously.
- * Flexible object architecture optimized for network processing.
- Ability to create long paths to objects and remove arbitrarily huge
- directories with a single network command.
- (like removing the whole kernel tree via a single network command).
- * Very high performance.
- * Fast and scalable multithreaded userspace server. Being in userspace it works
- with any underlying filesystem and still is much faster than async in-kernel NFS one.
- * Client is able to switch between different servers (if one goes down, client
- automatically reconnects to second and so on).
- * Transactions support. Full failover for all operations.
- Resending transactions to different servers on timeout or error.
- * Read request (data read, directory listing, lookup requests) balancing between multiple servers.
- * Write requests are replicated to multiple servers and completed only when all of them are acked.
- * Ability to add and/or remove servers from the working set at run-time.
- * Strong authentication and possible data encryption in network channel.
- * Extended attributes support.
-
-POHMELFS is based on transactions, which are potentially long-standing objects that live
-in the client's memory. Each transaction contains all the information needed to process a given
-command (or set of commands, which is frequently used during data writing: single transactions
-can contain creation and data writing commands). Transactions are committed by all the servers
-to which they are sent and, in case of failures, are eventually resent or dropped with an error.
-For example, reading will return an error if no servers are available.
-
-POHMELFS uses a asynchronous approach to data processing. Courtesy of transactions, it is
-possible to detach replies from requests and, if the command requires data to be received, the
-caller sleeps waiting for it. Thus, it is possible to issue multiple read commands to different
-servers and async threads will pick up replies in parallel, find appropriate transactions in the
-system and put the data where it belongs (like the page or inode cache).
-
-The main feature of POHMELFS is writeback data and the metadata cache.
-Only a few non-performance critical operations use the write-through cache and
-are synchronous: hard and symbolic link creation, and object rename. Creation,
-removal of objects and data writing are asynchronous and are sent to
-the server during system writeback. Only one writer at a time is allowed for any
-given inode, which is guarded by an appropriate locking protocol.
-Because of this feature, POHMELFS is extremely fast at metadata intensive
-workloads and can fully utilize the bandwidth to the servers when doing bulk
-data transfers.
-
-POHMELFS clients operate with a working set of servers and are capable of balancing read-only
-operations (like lookups or directory listings) between them according to IO priorities.
-Administrators can add or remove servers from the set at run-time via special commands (described
-in Documentation/filesystems/pohmelfs/info.txt file). Writes are replicated to all servers, which
-are connected with write permission turned on. IO priority and permissions can be changed in
-run-time.
-
-POHMELFS is capable of full data channel encryption and/or strong crypto hashing.
-One can select any kernel supported cipher, encryption mode, hash type and operation mode
-(hmac or digest). It is also possible to use both or neither (default). Crypto configuration
-is checked during mount time and, if the server does not support it, appropriate capabilities
-will be disabled or mount will fail (if 'crypto_fail_unsupported' mount option is specified).
-Crypto performance heavily depends on the number of crypto threads, which asynchronously perform
-crypto operations and send the resulting data to server or submit it up the stack. This number
-can be controlled via a mount option.
diff --git a/Documentation/filesystems/pohmelfs/info.txt b/Documentation/filesystems/pohmelfs/info.txt
deleted file mode 100644
index db2e41393626..000000000000
--- a/Documentation/filesystems/pohmelfs/info.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-POHMELFS usage information.
-
-Mount options.
-All but index, number of crypto threads and maximum IO size can changed via remount.
-
-idx=%u
- Each mountpoint is associated with a special index via this option.
- Administrator can add or remove servers from the given index, so all mounts,
- which were attached to it, are updated.
- Default it is 0.
-
-trans_scan_timeout=%u
- This timeout, expressed in milliseconds, specifies time to scan transaction
- trees looking for stale requests, which have to be resent, or if number of
- retries exceed specified limit, dropped with error.
- Default is 5 seconds.
-
-drop_scan_timeout=%u
- Internal timeout, expressed in milliseconds, which specifies how frequently
- inodes marked to be dropped are freed. It also specifies how frequently
- the system checks that servers have to be added or removed from current working set.
- Default is 1 second.
-
-wait_on_page_timeout=%u
- Number of milliseconds to wait for reply from remote server for data reading command.
- If this timeout is exceeded, reading returns an error.
- Default is 5 seconds.
-
-trans_retries=%u
- This is the number of times that a transaction will be resent to a server that did
- not answer for the last @trans_scan_timeout milliseconds.
- When the number of resends exceeds this limit, the transaction is completed with error.
- Default is 5 resends.
-
-crypto_thread_num=%u
- Number of crypto processing threads. Threads are used both for RX and TX traffic.
- Default is 2, or no threads if crypto operations are not supported.
-
-trans_max_pages=%u
- Maximum number of pages in a single transaction. This parameter also controls
- the number of pages, allocated for crypto processing (each crypto thread has
- pool of pages, the number of which is equal to 'trans_max_pages'.
- Default is 100 pages.
-
-crypto_fail_unsupported
- If specified, mount will fail if the server does not support requested crypto operations.
- By default mount will disable non-matching crypto operations.
-
-mcache_timeout=%u
- Maximum number of milliseconds to wait for the mcache objects to be processed.
- Mcache includes locks (given lock should be granted by server), attributes (they should be
- fully received in the given timeframe).
- Default is 5 seconds.
-
-Usage examples.
-
-Add server server1.net:1025 into the working set with index $idx
-with appropriate hash algorithm and key file and cipher algorithm, mode and key file:
-$cfg A add -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
-
-Mount filesystem with given index $idx to /mnt mountpoint.
-Client will connect to all servers specified in the working set via previous command:
-mount -t pohmel -o idx=$idx q /mnt
-
-Change permissions to read-only (-I 1 option, '-I 2' - write-only, 3 - rw):
-$cfg A modify -a server1.net -p 1025 -i $idx -I 1
-
-Change IO priority to 123 (node with the highest priority gets read requests).
-$cfg A modify -a server1.net -p 1025 -i $idx -P 123
-
-One can check currect status of all connections in the mountstats file:
-# cat /proc/$PID/mountstats
-...
-device none mounted on /mnt with fstype pohmel
-idx addr(:port) socket_type protocol active priority permissions
-0 server1.net:1026 1 6 1 250 1
-0 server2.net:1025 1 6 1 123 3
-
-Server installation.
-
-Creating a server, which listens at port 1025 and 0.0.0.0 address.
-Working root directory (note, that server chroots there, so you have to have appropriate permissions)
-is set to /mnt, server will negotiate hash/cipher with client, in case client requested it, there
-are appropriate key files.
-Number of working threads is set to 10.
-
-# ./fserver -a 0.0.0.0 -p 1025 -r /mnt -w 10 -K hash_key -k cipher_key
-
- -A 6 - listen on ipv6 address. Default: Disabled.
- -r root - path to root directory. Default: /tmp.
- -a addr - listen address. Default: 0.0.0.0.
- -p port - listen port. Default: 1025.
- -w workers - number of workers per connected client. Default: 1.
- -K file - hash key size. Default: none.
- -k file - cipher key size. Default: none.
- -h - this help.
-
-Number of worker threads specifies how many workers will be created for each client.
-Bulk single-client transafers usually are better handled with smaller number (like 1-3).
diff --git a/Documentation/filesystems/pohmelfs/network_protocol.txt b/Documentation/filesystems/pohmelfs/network_protocol.txt
deleted file mode 100644
index c680b4b5353d..000000000000
--- a/Documentation/filesystems/pohmelfs/network_protocol.txt
+++ /dev/null
@@ -1,227 +0,0 @@
-POHMELFS network protocol.
-
-Basic structure used in network communication is following command:
-
-struct netfs_cmd
-{
- __u16 cmd; /* Command number */
- __u16 csize; /* Attached crypto information size */
- __u16 cpad; /* Attached padding size */
- __u16 ext; /* External flags */
- __u32 size; /* Size of the attached data */
- __u32 trans; /* Transaction id */
- __u64 id; /* Object ID to operate on. Used for feedback.*/
- __u64 start; /* Start of the object. */
- __u64 iv; /* IV sequence */
- __u8 data[0];
-};
-
-Commands can be embedded into transaction command (which in turn has own command),
-so one can extend protocol as needed without breaking backward compatibility as long
-as old commands are supported. All string lengths include tail 0 byte.
-
-All commands are transferred over the network in big-endian. CPU endianness is used at the end peers.
-
-@cmd - command number, which specifies command to be processed. Following
- commands are used currently:
-
- NETFS_READDIR = 1, /* Read directory for given inode number */
- NETFS_READ_PAGE, /* Read data page from the server */
- NETFS_WRITE_PAGE, /* Write data page to the server */
- NETFS_CREATE, /* Create directory entry */
- NETFS_REMOVE, /* Remove directory entry */
- NETFS_LOOKUP, /* Lookup single object */
- NETFS_LINK, /* Create a link */
- NETFS_TRANS, /* Transaction */
- NETFS_OPEN, /* Open intent */
- NETFS_INODE_INFO, /* Metadata cache coherency synchronization message */
- NETFS_PAGE_CACHE, /* Page cache invalidation message */
- NETFS_READ_PAGES, /* Read multiple contiguous pages in one go */
- NETFS_RENAME, /* Rename object */
- NETFS_CAPABILITIES, /* Capabilities of the client, for example supported crypto */
- NETFS_LOCK, /* Distributed lock message */
- NETFS_XATTR_SET, /* Set extended attribute */
- NETFS_XATTR_GET, /* Get extended attribute */
-
-@ext - external flags. Used by different commands to specify some extra arguments
- like partial size of the embedded objects or creation flags.
-
-@size - size of the attached data. For NETFS_READ_PAGE and NETFS_READ_PAGES no data is attached,
- but size of the requested data is incorporated here. It does not include size of the command
- header (struct netfs_cmd) itself.
-
-@id - id of the object this command operates on. Each command can use it for own purpose.
-
-@start - start of the object this command operates on. Each command can use it for own purpose.
-
-@csize, @cpad - size and padding size of the (attached if needed) crypto information.
-
-Command specifications.
-
-@NETFS_READDIR
-This command is used to sync content of the remote dir to the client.
-
-@ext - length of the path to object.
-@size - the same.
-@id - local inode number of the directory to read.
-@start - zero.
-
-
-@NETFS_READ_PAGE
-This command is used to read data from remote server.
-Data size does not exceed local page cache size.
-
-@id - inode number.
-@start - first byte offset.
-@size - number of bytes to read plus length of the path to object.
-@ext - object path length.
-
-
-@NETFS_CREATE
-Used to create object.
-It does not require that all directories on top of the object were
-already created, it will create them automatically. Each object has
-associated @netfs_path_entry data structure, which contains creation
-mode (permissions and type) and length of the name as long as name itself.
-
-@start - 0
-@size - size of the all data structures needed to create a path
-@id - local inode number
-@ext - 0
-
-
-@NETFS_REMOVE
-Used to remove object.
-
-@ext - length of the path to object.
-@size - the same.
-@id - local inode number.
-@start - zero.
-
-
-@NETFS_LOOKUP
-Lookup information about object on server.
-
-@ext - length of the path to object.
-@size - the same.
-@id - local inode number of the directory to look object in.
-@start - local inode number of the object to look at.
-
-
-@NETFS_LINK
-Create hard of symlink.
-Command is sent as "object_path|target_path".
-
-@size - size of the above string.
-@id - parent local inode number.
-@start - 1 for symlink, 0 for hardlink.
-@ext - size of the "object_path" above.
-
-
-@NETFS_TRANS
-Transaction header.
-
-@size - incorporates all embedded command sizes including theirs header sizes.
-@start - transaction generation number - unique id used to find transaction.
-@ext - transaction flags. Unused at the moment.
-@id - 0.
-
-
-@NETFS_OPEN
-Open intent for given transaction.
-
-@id - local inode number.
-@start - 0.
-@size - path length to the object.
-@ext - open flags (O_RDWR and so on).
-
-
-@NETFS_INODE_INFO
-Metadata update command.
-It is sent to servers when attributes of the object are changed and received
-when data or metadata were updated. It operates with the following structure:
-
-struct netfs_inode_info
-{
- unsigned int mode;
- unsigned int nlink;
- unsigned int uid;
- unsigned int gid;
- unsigned int blocksize;
- unsigned int padding;
- __u64 ino;
- __u64 blocks;
- __u64 rdev;
- __u64 size;
- __u64 version;
-};
-
-It effectively mirrors stat(2) returned data.
-
-
-@ext - path length to the object.
-@size - the same plus size of the netfs_inode_info structure.
-@id - local inode number.
-@start - 0.
-
-
-@NETFS_PAGE_CACHE
-Command is only received by clients. It contains information about
-page to be marked as not up-to-date.
-
-@id - client's inode number.
-@start - last byte of the page to be invalidated. If it is not equal to
- current inode size, it will be vmtruncated().
-@size - 0
-@ext - 0
-
-
-@NETFS_READ_PAGES
-Used to read multiple contiguous pages in one go.
-
-@start - first byte of the contiguous region to read.
-@size - contains of two fields: lower 8 bits are used to represent page cache shift
- used by client, another 3 bytes are used to get number of pages.
-@id - local inode number.
-@ext - path length to the object.
-
-
-@NETFS_RENAME
-Used to rename object.
-Attached data is formed into following string: "old_path|new_path".
-
-@id - local inode number.
-@start - parent inode number.
-@size - length of the above string.
-@ext - length of the old path part.
-
-
-@NETFS_CAPABILITIES
-Used to exchange crypto capabilities with server.
-If crypto capabilities are not supported by server, then client will disable it
-or fail (if 'crypto_fail_unsupported' mount options was specified).
-
-@id - superblock index. Used to specify crypto information for group of servers.
-@size - size of the attached capabilities structure.
-@start - 0.
-@size - 0.
-@scsize - 0.
-
-@NETFS_LOCK
-Used to send lock request/release messages. Although it sends byte range request
-and is capable of flushing pages based on that, it is not used, since all Linux
-filesystems lock the whole inode.
-
-@id - lock generation number.
-@start - start of the locked range.
-@size - size of the locked range.
-@ext - lock type: read/write. Not used actually. 15'th bit is used to determine,
- if it is lock request (1) or release (0).
-
-@NETFS_XATTR_SET
-@NETFS_XATTR_GET
-Used to set/get extended attributes for given inode.
-@id - attribute generation number or xattr setting type
-@start - size of the attribute (request or attached)
-@size - name length, path len and data size for given attribute
-@ext - path length for given object
diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting
index 7b7b845c490a..cf43bc4dbf31 100644
--- a/Documentation/filesystems/porting
+++ b/Documentation/filesystems/porting
@@ -622,3 +622,19 @@ in your dentry operations instead.
alloc_file_clone(file, flags, ops) does not affect any caller's references.
On success you get a new struct file sharing the mount/dentry with the
original, on failure - ERR_PTR().
+--
+[mandatory]
+ ->clone_file_range() and ->dedupe_file_range have been replaced with
+ ->remap_file_range(). See Documentation/filesystems/vfs.txt for more
+ information.
+--
+[recommended]
+ ->lookup() instances doing an equivalent of
+ if (IS_ERR(inode))
+ return ERR_CAST(inode);
+ return d_splice_alias(inode, dentry);
+ don't need to bother with the check - d_splice_alias() will do the
+ right thing when given ERR_PTR(...) as inode. Moreover, passing NULL
+ inode to d_splice_alias() will also do the right thing (equivalent of
+ d_add(dentry, NULL); return NULL;), so that kind of special cases
+ also doesn't need a separate treatment.
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 22b4b00dee31..12a5e6e693b6 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -858,6 +858,7 @@ Writeback: 0 kB
AnonPages: 861800 kB
Mapped: 280372 kB
Shmem: 644 kB
+KReclaimable: 168048 kB
Slab: 284364 kB
SReclaimable: 159856 kB
SUnreclaim: 124508 kB
@@ -925,6 +926,9 @@ AnonHugePages: Non-file backed huge pages mapped into userspace page tables
ShmemHugePages: Memory used by shared memory (shmem) and tmpfs allocated
with huge pages
ShmemPmdMapped: Shared memory mapped into userspace with huge pages
+KReclaimable: Kernel allocations that the kernel will attempt to reclaim
+ under memory pressure. Includes SReclaimable (below), and other
+ direct allocations with a shrinker.
Slab: in-kernel data structures cache
SReclaimable: Part of Slab, that might be reclaimed, such as caches
SUnreclaim: Part of Slab, that cannot be reclaimed on memory pressure
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index a6c6a8af48a2..5f71a252e2e0 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -883,8 +883,9 @@ struct file_operations {
unsigned (*mmap_capabilities)(struct file *);
#endif
ssize_t (*copy_file_range)(struct file *, loff_t, struct file *, loff_t, size_t, unsigned int);
- int (*clone_file_range)(struct file *, loff_t, struct file *, loff_t, u64);
- int (*dedupe_file_range)(struct file *, loff_t, struct file *, loff_t, u64);
+ loff_t (*remap_file_range)(struct file *file_in, loff_t pos_in,
+ struct file *file_out, loff_t pos_out,
+ loff_t len, unsigned int remap_flags);
int (*fadvise)(struct file *, loff_t, loff_t, int);
};
@@ -960,11 +961,18 @@ otherwise noted.
copy_file_range: called by the copy_file_range(2) system call.
- clone_file_range: called by the ioctl(2) system call for FICLONERANGE and
- FICLONE commands.
-
- dedupe_file_range: called by the ioctl(2) system call for FIDEDUPERANGE
- command.
+ remap_file_range: called by the ioctl(2) system call for FICLONERANGE and
+ FICLONE and FIDEDUPERANGE commands to remap file ranges. An
+ implementation should remap len bytes at pos_in of the source file into
+ the dest file at pos_out. Implementations must handle callers passing
+ in len == 0; this means "remap to the end of the source file". The
+ return value should the number of bytes remapped, or the usual
+ negative error code if errors occurred before any bytes were remapped.
+ The remap_flags parameter accepts REMAP_FILE_* flags. If
+ REMAP_FILE_DEDUP is set then the implementation must only remap if the
+ requested file ranges have identical contents. If REMAP_CAN_SHORTEN is
+ set, the caller is ok with the implementation shortening the request
+ length to satisfy alignment or EOF requirements (or any other reason).
fadvise: possibly called by the fadvise64() system call.
diff --git a/Documentation/fmc/00-INDEX b/Documentation/fmc/00-INDEX
deleted file mode 100644
index 431c69570f43..000000000000
--- a/Documentation/fmc/00-INDEX
+++ /dev/null
@@ -1,38 +0,0 @@
-
-Documentation in this directory comes from sections of the manual we
-wrote for the externally-developed fmc-bus package. The complete
-manual as of today (2013-02) is available in PDF format at
-http://www.ohwr.org/projects/fmc-bus/files
-
-00-INDEX
- - this file.
-
-FMC-and-SDB.txt
- - What are FMC and SDB, basic concepts for this framework
-
-API.txt
- - The functions that are exported by the bus driver
-
-parameters.txt
- - The module parameters
-
-carrier.txt
- - writing a carrier (a device)
-
-mezzanine.txt
- - writing code for your mezzanine (a driver)
-
-identifiers.txt
- - how identification and matching works
-
-fmc-fakedev.txt
- - about drivers/fmc/fmc-fakedev.ko
-
-fmc-trivial.txt
- - about drivers/fmc/fmc-trivial.ko
-
-fmc-write-eeprom.txt
- - about drivers/fmc/fmc-write-eeprom.ko
-
-fmc-chardev.txt
- - about drivers/fmc/fmc-chardev.ko
diff --git a/Documentation/gpio/00-INDEX b/Documentation/gpio/00-INDEX
deleted file mode 100644
index 17e19a68058f..000000000000
--- a/Documentation/gpio/00-INDEX
+++ /dev/null
@@ -1,4 +0,0 @@
-00-INDEX
- - This file
-sysfs.txt
- - Information about the GPIO sysfs interface
diff --git a/Documentation/hwmon/ina3221 b/Documentation/hwmon/ina3221
index 0ff74854cb2e..4b82cbfb551c 100644
--- a/Documentation/hwmon/ina3221
+++ b/Documentation/hwmon/ina3221
@@ -21,6 +21,8 @@ and power are calculated host-side from these.
Sysfs entries
-------------
+in[123]_label Voltage channel labels
+in[123]_enable Voltage channel enable controls
in[123]_input Bus voltage(mV) channels
curr[123]_input Current(mA) measurement channels
shunt[123]_resistor Shunt resistance(uOhm) channels
diff --git a/Documentation/hwmon/lm75 b/Documentation/hwmon/lm75
index ac95edfcd907..2f1120f88c16 100644
--- a/Documentation/hwmon/lm75
+++ b/Documentation/hwmon/lm75
@@ -17,8 +17,8 @@ Supported chips:
Addresses scanned: none
Datasheet: Publicly available at the Maxim website
http://www.maximintegrated.com/
- * Maxim MAX6625, MAX6626
- Prefixes: 'max6625', 'max6626'
+ * Maxim MAX6625, MAX6626, MAX31725, MAX31726
+ Prefixes: 'max6625', 'max6626', 'max31725', 'max31726'
Addresses scanned: none
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/
@@ -86,7 +86,7 @@ The LM75 is essentially an industry standard; there may be other
LM75 clones not listed here, with or without various enhancements,
that are supported. The clones are not detected by the driver, unless
they reproduce the exact register tricks of the original LM75, and must
-therefore be instantiated explicitly. Higher resolution up to 12-bit
+therefore be instantiated explicitly. Higher resolution up to 16-bit
is supported by this driver, other specific enhancements are not.
The LM77 is not supported, contrary to what we pretended for a long time.
diff --git a/Documentation/hwmon/ltc2978 b/Documentation/hwmon/ltc2978
index 9a49d3c90cd1..dfb2caa401d9 100644
--- a/Documentation/hwmon/ltc2978
+++ b/Documentation/hwmon/ltc2978
@@ -55,6 +55,10 @@ Supported chips:
Prefix: 'ltm4676'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltm4676
+ * Analog Devices LTM4686
+ Prefix: 'ltm4686'
+ Addresses scanned: -
+ Datasheet: http://www.analog.com/ltm4686
Author: Guenter Roeck <linux@roeck-us.net>
@@ -76,6 +80,7 @@ additional components on a single die. The chip is instantiated and reported
as two separate chips on two different I2C bus addresses.
LTM4675 is a dual 9A or single 18A μModule regulator
LTM4676 is a dual 13A or single 26A uModule regulator.
+LTM4686 is a dual 10A or single 20A uModule regulator.
Usage Notes
diff --git a/Documentation/hwmon/mc13783-adc b/Documentation/hwmon/mc13783-adc
index d0e7b3fa9e75..05ccc9f159f1 100644
--- a/Documentation/hwmon/mc13783-adc
+++ b/Documentation/hwmon/mc13783-adc
@@ -2,12 +2,12 @@ Kernel driver mc13783-adc
=========================
Supported chips:
- * Freescale Atlas MC13783
+ * Freescale MC13783
Prefix: 'mc13783'
- Datasheet: http://www.freescale.com/files/rf_if/doc/data_sheet/MC13783.pdf?fsrch=1
- * Freescale Atlas MC13892
+ Datasheet: https://www.nxp.com/docs/en/data-sheet/MC13783.pdf
+ * Freescale MC13892
Prefix: 'mc13892'
- Datasheet: http://cache.freescale.com/files/analog/doc/data_sheet/MC13892.pdf?fsrch=1&sr=1
+ Datasheet: https://www.nxp.com/docs/en/data-sheet/MC13892.pdf
Authors:
Sascha Hauer <s.hauer@pengutronix.de>
diff --git a/Documentation/ide/00-INDEX b/Documentation/ide/00-INDEX
deleted file mode 100644
index 22f98ca79539..000000000000
--- a/Documentation/ide/00-INDEX
+++ /dev/null
@@ -1,14 +0,0 @@
-00-INDEX
- - this file
-ChangeLog.ide-cd.1994-2004
- - ide-cd changelog
-ChangeLog.ide-floppy.1996-2002
- - ide-floppy changelog
-ChangeLog.ide-tape.1995-2002
- - ide-tape changelog
-ide-tape.txt
- - info on the IDE ATAPI streaming tape driver
-ide.txt
- - important info for users of ATA devices (IDE/EIDE disks and CD-ROMS).
-warm-plug-howto.txt
- - using sysfs to remove and add IDE devices. \ No newline at end of file
diff --git a/Documentation/index.rst b/Documentation/index.rst
index 5db7e87c7cb1..c858c2e66e36 100644
--- a/Documentation/index.rst
+++ b/Documentation/index.rst
@@ -22,10 +22,7 @@ The following describes the license of the Linux kernel source code
(GPLv2), how to properly mark the license of individual files in the source
tree, as well as links to the full license text.
-.. toctree::
- :maxdepth: 2
-
- process/license-rules.rst
+* :ref:`kernel_licensing`
User-oriented documentation
---------------------------
diff --git a/Documentation/input/event-codes.rst b/Documentation/input/event-codes.rst
index a8c0873beb95..cef220c176a4 100644
--- a/Documentation/input/event-codes.rst
+++ b/Documentation/input/event-codes.rst
@@ -190,7 +190,16 @@ A few EV_REL codes have special meanings:
* REL_WHEEL, REL_HWHEEL:
- These codes are used for vertical and horizontal scroll wheels,
- respectively.
+ respectively. The value is the number of "notches" moved on the wheel, the
+ physical size of which varies by device. For high-resolution wheels (which
+ report multiple events for each notch of movement, or do not have notches)
+ this may be an approximation based on the high-resolution scroll events.
+
+* REL_WHEEL_HI_RES:
+
+ - If a vertical scroll wheel supports high-resolution scrolling, this code
+ will be emitted in addition to REL_WHEEL. The value is the (approximate)
+ distance travelled by the user's finger, in microns.
EV_ABS
------
diff --git a/Documentation/ioctl/00-INDEX b/Documentation/ioctl/00-INDEX
deleted file mode 100644
index c1a925787950..000000000000
--- a/Documentation/ioctl/00-INDEX
+++ /dev/null
@@ -1,12 +0,0 @@
-00-INDEX
- - this file
-botching-up-ioctls.txt
- - how to avoid botching up ioctls
-cdrom.txt
- - summary of CDROM ioctl calls
-hdio.txt
- - summary of HDIO_ ioctl calls
-ioctl-decoding.txt
- - how to decode the bits of an IOCTL code
-ioctl-number.txt
- - how to implement and register device/driver ioctl calls
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index f2ac672eb766..af6f6ba1fe80 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -201,7 +201,7 @@ Code Seq#(hex) Include File Comments
'X' 01 linux/pktcdvd.h conflict!
'Y' all linux/cyclades.h
'Z' 14-15 drivers/message/fusion/mptctl.h
-'[' 00-07 linux/usb/tmc.h USB Test and Measurement Devices
+'[' 00-3F linux/usb/tmc.h USB Test and Measurement Devices
<mailto:gregkh@linuxfoundation.org>
'a' all linux/atm*.h, linux/sonet.h ATM on linux
<http://lrcwww.epfl.ch/>
diff --git a/Documentation/isdn/00-INDEX b/Documentation/isdn/00-INDEX
deleted file mode 100644
index 2d1889b6c1fa..000000000000
--- a/Documentation/isdn/00-INDEX
+++ /dev/null
@@ -1,42 +0,0 @@
-00-INDEX
- - this file (info on ISDN implementation for Linux)
-CREDITS
- - list of the kind folks that brought you this stuff.
-HiSax.cert
- - information about the ITU approval certification of the HiSax driver.
-INTERFACE
- - description of isdn4linux Link Level and Hardware Level interfaces.
-INTERFACE.fax
- - description of the fax subinterface of isdn4linux.
-INTERFACE.CAPI
- - description of kernel CAPI Link Level to Hardware Level interface.
-README
- - general info on what you need and what to do for Linux ISDN.
-README.FAQ
- - general info for FAQ.
-README.HiSax
- - info on the HiSax driver which replaces the old teles.
-README.audio
- - info for running audio over ISDN.
-README.avmb1
- - info on driver for AVM-B1 ISDN card.
-README.concap
- - info on "CONCAP" encapsulation protocol interface used for X.25.
-README.diversion
- - info on module for isdn diversion services.
-README.fax
- - info for using Fax over ISDN.
-README.gigaset
- - info on the drivers for Siemens Gigaset ISDN adapters
-README.hfc-pci
- - info on hfc-pci based cards.
-README.hysdn
- - info on driver for Hypercope active HYSDN cards
-README.mISDN
- - info on the Modular ISDN subsystem (mISDN)
-README.syncppp
- - info on running Sync PPP over ISDN.
-README.x25
- - info for running X.25 over ISDN.
-syncPPP.FAQ
- - frequently asked questions about running PPP over ISDN.
diff --git a/Documentation/kbuild/00-INDEX b/Documentation/kbuild/00-INDEX
deleted file mode 100644
index 8c5e6aa78004..000000000000
--- a/Documentation/kbuild/00-INDEX
+++ /dev/null
@@ -1,14 +0,0 @@
-00-INDEX
- - this file: info on the kernel build process
-headers_install.txt
- - how to export Linux headers for use by userspace
-kbuild.txt
- - developer information on kbuild
-kconfig.txt
- - usage help for make *config
-kconfig-language.txt
- - specification of Config Language, the language in Kconfig files
-makefiles.txt
- - developer information for linux kernel makefiles
-modules.txt
- - how to build modules and to install them
diff --git a/Documentation/kernel-per-CPU-kthreads.txt b/Documentation/kernel-per-CPU-kthreads.txt
index 0f00f9c164ac..23b0c8b20cd1 100644
--- a/Documentation/kernel-per-CPU-kthreads.txt
+++ b/Documentation/kernel-per-CPU-kthreads.txt
@@ -321,7 +321,7 @@ To reduce its OS jitter, do at least one of the following:
to do.
Name:
- rcuob/%d, rcuop/%d, and rcuos/%d
+ rcuop/%d and rcuos/%d
Purpose:
Offload RCU callbacks from the corresponding CPU.
diff --git a/Documentation/laptops/00-INDEX b/Documentation/laptops/00-INDEX
deleted file mode 100644
index 86169dc766f7..000000000000
--- a/Documentation/laptops/00-INDEX
+++ /dev/null
@@ -1,16 +0,0 @@
-00-INDEX
- - This file
-asus-laptop.txt
- - information on the Asus Laptop Extras driver.
-disk-shock-protection.txt
- - information on hard disk shock protection.
-laptop-mode.txt
- - how to conserve battery power using laptop-mode.
-sony-laptop.txt
- - Sony Notebook Control Driver (SNC) Readme.
-sonypi.txt
- - info on Linux Sony Programmable I/O Device support.
-thinkpad-acpi.txt
- - information on the (IBM and Lenovo) ThinkPad ACPI Extras driver.
-toshiba_haps.txt
- - information on the Toshiba HDD Active Protection Sensor driver.
diff --git a/Documentation/laptops/lg-laptop.rst b/Documentation/laptops/lg-laptop.rst
new file mode 100644
index 000000000000..e486fe7ddc35
--- /dev/null
+++ b/Documentation/laptops/lg-laptop.rst
@@ -0,0 +1,81 @@
+.. SPDX-License-Identifier: GPL-2.0+
+LG Gram laptop extra features
+=============================
+
+By Matan Ziv-Av <matan@svgalib.org>
+
+
+Hotkeys
+-------
+
+The following FN keys are ignored by the kernel without this driver:
+- FN-F1 (LG control panel) - Generates F15
+- FN-F5 (Touchpad toggle) - Generates F13
+- FN-F6 (Airplane mode) - Generates RFKILL
+- FN-F8 (Keyboard backlight) - Generates F16.
+ This key also changes keyboard backlight mode.
+- FN-F9 (Reader mode) - Generates F14
+
+The rest of the FN key work without a need for a special driver.
+
+
+Reader mode
+-----------
+
+Writing 0/1 to /sys/devices/platform/lg-laptop/reader_mode disables/enables
+reader mode. In this mode the screen colors change (blue color reduced),
+and the reader mode indicator LED (on F9 key) turns on.
+
+
+FN Lock
+-------
+
+Writing 0/1 to /sys/devices/platform/lg-laptop/fn_lock disables/enables
+FN lock.
+
+
+Battery care limit
+------------------
+
+Writing 80/100 to /sys/devices/platform/lg-laptop/battery_care_limit
+sets the maximum capacity to charge the battery. Limiting the charge
+reduces battery capacity loss over time.
+
+This value is reset to 100 when the kernel boots.
+
+
+Fan mode
+--------
+
+Writing 1/0 to /sys/devices/platform/lg-laptop/fan_mode disables/enables
+the fan silent mode.
+
+
+USB charge
+----------
+
+Writing 0/1 to /sys/devices/platform/lg-laptop/usb_charge disables/enables
+charging another device from the USB port while the device is turned off.
+
+This value is reset to 0 when the kernel boots.
+
+
+LEDs
+~~~~
+
+The are two LED devices supported by the driver:
+
+Keyboard backlight
+------------------
+
+A led device named kbd_led controls the keyboard backlight. There are three
+lighting level: off (0), low (127) and high (255).
+
+The keyboard backlight is also controlled by the key combination FN-F8
+which cycles through those levels.
+
+
+Touchpad indicator LED
+----------------------
+
+On the F5 key. Controlled by led device names tpad_led.
diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX
deleted file mode 100644
index ae626b29a740..000000000000
--- a/Documentation/leds/00-INDEX
+++ /dev/null
@@ -1,32 +0,0 @@
-00-INDEX
- - This file
-leds-blinkm.txt
- - Driver for BlinkM LED-devices.
-leds-class.txt
- - documents LED handling under Linux.
-leds-class-flash.txt
- - documents flash LED handling under Linux.
-leds-lm3556.txt
- - notes on how to use the leds-lm3556 driver.
-leds-lp3944.txt
- - notes on how to use the leds-lp3944 driver.
-leds-lp5521.txt
- - notes on how to use the leds-lp5521 driver.
-leds-lp5523.txt
- - notes on how to use the leds-lp5523 driver.
-leds-lp5562.txt
- - notes on how to use the leds-lp5562 driver.
-leds-lp55xx.txt
- - description about lp55xx common driver.
-leds-lm3556.txt
- - notes on how to use the leds-lm3556 driver.
-leds-mlxcpld.txt
- - notes on how to use the leds-mlxcpld driver.
-ledtrig-oneshot.txt
- - One-shot LED trigger for both sporadic and dense events.
-ledtrig-transient.txt
- - LED Transient Trigger, one shot timer activation.
-ledtrig-usbport.txt
- - notes on how to use the drivers/usb/core/ledtrig-usbport.c trigger.
-uleds.txt
- - notes on how to use the uleds driver.
diff --git a/Documentation/locking/00-INDEX b/Documentation/locking/00-INDEX
deleted file mode 100644
index c256c9bee2a4..000000000000
--- a/Documentation/locking/00-INDEX
+++ /dev/null
@@ -1,16 +0,0 @@
-00-INDEX
- - this file.
-lockdep-design.txt
- - documentation on the runtime locking correctness validator.
-lockstat.txt
- - info on collecting statistics on locks (and contention).
-mutex-design.txt
- - info on the generic mutex subsystem.
-rt-mutex-design.txt
- - description of the RealTime mutex implementation design.
-rt-mutex.txt
- - desc. of RT-mutex subsystem with PI (Priority Inheritance) support.
-spinlocks.txt
- - info on using spinlocks to provide exclusive access in kernel.
-ww-mutex-design.txt
- - Intro to Mutex wait/would deadlock handling.s
diff --git a/Documentation/locking/lockstat.txt b/Documentation/locking/lockstat.txt
index 5786ad2cd5e6..fdbeb0c45ef3 100644
--- a/Documentation/locking/lockstat.txt
+++ b/Documentation/locking/lockstat.txt
@@ -91,7 +91,7 @@ Look at the current lock statistics:
07 &mm->mmap_sem-R: 37 100 1.31 299502.61 325629.52 3256.30 212344 34316685 0.10 7744.91 95016910.20 2.77
08 ---------------
09 &mm->mmap_sem 1 [<ffffffff811502a7>] khugepaged_scan_mm_slot+0x57/0x280
-19 &mm->mmap_sem 96 [<ffffffff815351c4>] __do_page_fault+0x1d4/0x510
+10 &mm->mmap_sem 96 [<ffffffff815351c4>] __do_page_fault+0x1d4/0x510
11 &mm->mmap_sem 34 [<ffffffff81113d77>] vm_mmap_pgoff+0x87/0xd0
12 &mm->mmap_sem 17 [<ffffffff81127e71>] vm_munmap+0x41/0x80
13 ---------------
diff --git a/Documentation/m68k/00-INDEX b/Documentation/m68k/00-INDEX
deleted file mode 100644
index 2be8c6b00e74..000000000000
--- a/Documentation/m68k/00-INDEX
+++ /dev/null
@@ -1,7 +0,0 @@
-00-INDEX
- - this file
-README.buddha
- - Amiga Buddha and Catweasel IDE Driver
-kernel-options.txt
- - command line options for Linux/m68k
-
diff --git a/Documentation/media/kapi/cec-core.rst b/Documentation/media/kapi/cec-core.rst
index 1d989c544370..bca1d9d1d223 100644
--- a/Documentation/media/kapi/cec-core.rst
+++ b/Documentation/media/kapi/cec-core.rst
@@ -268,6 +268,10 @@ to 1, if the hardware does support retry then either set these counters to
0 if the hardware provides no feedback of which errors occurred and how many
times, or fill in the correct values as reported by the hardware.
+Be aware that calling these functions can immediately start a new transmit
+if there is one pending in the queue. So make sure that the hardware is in
+a state where new transmits can be started *before* calling these functions.
+
The cec_transmit_attempt_done() function is a helper for cases where the
hardware never retries, so the transmit is always for just a single
attempt. It will call cec_transmit_done() in turn, filling in 1 for the
diff --git a/Documentation/media/kapi/mc-core.rst b/Documentation/media/kapi/mc-core.rst
index 0c05503eaf1f..69362b3135c2 100644
--- a/Documentation/media/kapi/mc-core.rst
+++ b/Documentation/media/kapi/mc-core.rst
@@ -262,3 +262,5 @@ in the end provide a way to use driver-specific callbacks.
.. kernel-doc:: include/media/media-devnode.h
.. kernel-doc:: include/media/media-entity.h
+
+.. kernel-doc:: include/media/media-request.h
diff --git a/Documentation/media/kapi/v4l2-subdev.rst b/Documentation/media/kapi/v4l2-subdev.rst
index e1f0b726e438..1280e05b662b 100644
--- a/Documentation/media/kapi/v4l2-subdev.rst
+++ b/Documentation/media/kapi/v4l2-subdev.rst
@@ -247,20 +247,28 @@ performed using the :c:func:`v4l2_async_unregister_subdev` call. Subdevices
registered this way are stored in a global list of subdevices, ready to be
picked up by bridge drivers.
-Bridge drivers in turn have to register a notifier object with an array of
-subdevice descriptors that the bridge device needs for its operation. This is
+Bridge drivers in turn have to register a notifier object. This is
performed using the :c:func:`v4l2_async_notifier_register` call. To
unregister the notifier the driver has to call
:c:func:`v4l2_async_notifier_unregister`. The former of the two functions
-takes two arguments: a pointer to struct :c:type:`v4l2_device` and a pointer to
-struct :c:type:`v4l2_async_notifier`. The latter contains a pointer to an array
-of pointers to subdevice descriptors of type struct :c:type:`v4l2_async_subdev`
-type. The V4L2 core will then use these descriptors to match asynchronously
-registered
-subdevices to them. If a match is detected the ``.bound()`` notifier callback
-is called. After all subdevices have been located the .complete() callback is
-called. When a subdevice is removed from the system the .unbind() method is
-called. All three callbacks are optional.
+takes two arguments: a pointer to struct :c:type:`v4l2_device` and a
+pointer to struct :c:type:`v4l2_async_notifier`.
+
+Before registering the notifier, bridge drivers must do two things:
+first, the notifier must be initialized using the
+:c:func:`v4l2_async_notifier_init`. Second, bridge drivers can then
+begin to form a list of subdevice descriptors that the bridge device
+needs for its operation. Subdevice descriptors are added to the notifier
+using the :c:func:`v4l2_async_notifier_add_subdev` call. This function
+takes two arguments: a pointer to struct :c:type:`v4l2_async_notifier`,
+and a pointer to the subdevice descripter, which is of type struct
+:c:type:`v4l2_async_subdev`.
+
+The V4L2 core will then use these descriptors to match asynchronously
+registered subdevices to them. If a match is detected the ``.bound()``
+notifier callback is called. After all subdevices have been located the
+.complete() callback is called. When a subdevice is removed from the
+system the .unbind() method is called. All three callbacks are optional.
V4L2 sub-device userspace API
-----------------------------
diff --git a/Documentation/media/uapi/cec/cec-func-poll.rst b/Documentation/media/uapi/cec/cec-func-poll.rst
index d49f1ee0742d..c698c969635c 100644
--- a/Documentation/media/uapi/cec/cec-func-poll.rst
+++ b/Documentation/media/uapi/cec/cec-func-poll.rst
@@ -74,4 +74,5 @@ is returned, and the ``errno`` variable is set appropriately:
The call was interrupted by a signal.
``EINVAL``
- The ``nfds`` argument is greater than ``OPEN_MAX``.
+ The ``nfds`` value exceeds the ``RLIMIT_NOFILE`` value. Use
+ ``getrlimit()`` to obtain this value.
diff --git a/Documentation/media/uapi/cec/cec-ioc-receive.rst b/Documentation/media/uapi/cec/cec-ioc-receive.rst
index e964074cd15b..b25e48afaa08 100644
--- a/Documentation/media/uapi/cec/cec-ioc-receive.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-receive.rst
@@ -16,10 +16,10 @@ CEC_RECEIVE, CEC_TRANSMIT - Receive or transmit a CEC message
Synopsis
========
-.. c:function:: int ioctl( int fd, CEC_RECEIVE, struct cec_msg *argp )
+.. c:function:: int ioctl( int fd, CEC_RECEIVE, struct cec_msg \*argp )
:name: CEC_RECEIVE
-.. c:function:: int ioctl( int fd, CEC_TRANSMIT, struct cec_msg *argp )
+.. c:function:: int ioctl( int fd, CEC_TRANSMIT, struct cec_msg \*argp )
:name: CEC_TRANSMIT
Arguments
@@ -272,6 +272,19 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
- The transmit failed after one or more retries. This status bit is
mutually exclusive with :ref:`CEC_TX_STATUS_OK <CEC-TX-STATUS-OK>`.
Other bits can still be set to explain which failures were seen.
+ * .. _`CEC-TX-STATUS-ABORTED`:
+
+ - ``CEC_TX_STATUS_ABORTED``
+ - 0x40
+ - The transmit was aborted due to an HDMI disconnect, or the adapter
+ was unconfigured, or a transmit was interrupted, or the driver
+ returned an error when attempting to start a transmit.
+ * .. _`CEC-TX-STATUS-TIMEOUT`:
+
+ - ``CEC_TX_STATUS_TIMEOUT``
+ - 0x80
+ - The transmit timed out. This should not normally happen and this
+ indicates a driver problem.
.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
@@ -300,6 +313,14 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
- The message was received successfully but the reply was
``CEC_MSG_FEATURE_ABORT``. This status is only set if this message
was the reply to an earlier transmitted message.
+ * .. _`CEC-RX-STATUS-ABORTED`:
+
+ - ``CEC_RX_STATUS_ABORTED``
+ - 0x08
+ - The wait for a reply to an earlier transmitted message was aborted
+ because the HDMI cable was disconnected, the adapter was unconfigured
+ or the :ref:`CEC_TRANSMIT <CEC_RECEIVE>` that waited for a
+ reply was interrupted.
diff --git a/Documentation/media/uapi/mediactl/media-controller.rst b/Documentation/media/uapi/mediactl/media-controller.rst
index 0eea4f9a07d5..66aff38cd499 100644
--- a/Documentation/media/uapi/mediactl/media-controller.rst
+++ b/Documentation/media/uapi/mediactl/media-controller.rst
@@ -21,6 +21,7 @@ Part IV - Media Controller API
media-controller-intro
media-controller-model
media-types
+ request-api
media-funcs
media-header
diff --git a/Documentation/media/uapi/mediactl/media-funcs.rst b/Documentation/media/uapi/mediactl/media-funcs.rst
index 076856501cdb..260f9dcadcde 100644
--- a/Documentation/media/uapi/mediactl/media-funcs.rst
+++ b/Documentation/media/uapi/mediactl/media-funcs.rst
@@ -16,3 +16,9 @@ Function Reference
media-ioc-enum-entities
media-ioc-enum-links
media-ioc-setup-link
+ media-ioc-request-alloc
+ request-func-close
+ request-func-ioctl
+ request-func-poll
+ media-request-ioc-queue
+ media-request-ioc-reinit
diff --git a/Documentation/media/uapi/mediactl/media-ioc-device-info.rst b/Documentation/media/uapi/mediactl/media-ioc-device-info.rst
index 649cb3d9e058..c6f224e404b7 100644
--- a/Documentation/media/uapi/mediactl/media-ioc-device-info.rst
+++ b/Documentation/media/uapi/mediactl/media-ioc-device-info.rst
@@ -26,6 +26,7 @@ Arguments
File descriptor returned by :ref:`open() <media-func-open>`.
``argp``
+ Pointer to struct :c:type:`media_device_info`.
Description
diff --git a/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst b/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst
index fc2e39c070c9..02738640e34e 100644
--- a/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst
+++ b/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst
@@ -26,6 +26,7 @@ Arguments
File descriptor returned by :ref:`open() <media-func-open>`.
``argp``
+ Pointer to struct :c:type:`media_entity_desc`.
Description
diff --git a/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst b/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst
index f158c134e9b0..b89aaae373df 100644
--- a/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst
+++ b/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst
@@ -26,6 +26,7 @@ Arguments
File descriptor returned by :ref:`open() <media-func-open>`.
``argp``
+ Pointer to struct :c:type:`media_links_enum`.
Description
diff --git a/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst b/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst
index bac128c7eda9..4e1c59238371 100644
--- a/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst
+++ b/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst
@@ -26,6 +26,7 @@ Arguments
File descriptor returned by :ref:`open() <media-func-open>`.
``argp``
+ Pointer to struct :c:type:`media_v2_topology`.
Description
diff --git a/Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst b/Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst
new file mode 100644
index 000000000000..0f8b31874002
--- /dev/null
+++ b/Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst
@@ -0,0 +1,66 @@
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media_ioc_request_alloc:
+
+*****************************
+ioctl MEDIA_IOC_REQUEST_ALLOC
+*****************************
+
+Name
+====
+
+MEDIA_IOC_REQUEST_ALLOC - Allocate a request
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, MEDIA_IOC_REQUEST_ALLOC, int *argp )
+ :name: MEDIA_IOC_REQUEST_ALLOC
+
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by :ref:`open() <media-func-open>`.
+
+``argp``
+ Pointer to an integer.
+
+
+Description
+===========
+
+If the media device supports :ref:`requests <media-request-api>`, then
+this ioctl can be used to allocate a request. If it is not supported, then
+``errno`` is set to ``ENOTTY``. A request is accessed through a file descriptor
+that is returned in ``*argp``.
+
+If the request was successfully allocated, then the request file descriptor
+can be passed to the :ref:`VIDIOC_QBUF <VIDIOC_QBUF>`,
+:ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`,
+:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` and
+:ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` ioctls.
+
+In addition, the request can be queued by calling
+:ref:`MEDIA_REQUEST_IOC_QUEUE` and re-initialized by calling
+:ref:`MEDIA_REQUEST_IOC_REINIT`.
+
+Finally, the file descriptor can be :ref:`polled <request-func-poll>` to wait
+for the request to complete.
+
+The request will remain allocated until all the file descriptors associated
+with it are closed by :ref:`close() <request-func-close>` and the driver no
+longer uses the request internally. See also
+:ref:`here <media-request-life-time>` for more information.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+ENOTTY
+ The driver has no support for requests.
diff --git a/Documentation/media/uapi/mediactl/media-ioc-setup-link.rst b/Documentation/media/uapi/mediactl/media-ioc-setup-link.rst
index ae5194940100..e345e7dc9ad7 100644
--- a/Documentation/media/uapi/mediactl/media-ioc-setup-link.rst
+++ b/Documentation/media/uapi/mediactl/media-ioc-setup-link.rst
@@ -26,6 +26,7 @@ Arguments
File descriptor returned by :ref:`open() <media-func-open>`.
``argp``
+ Pointer to struct :c:type:`media_link_desc`.
Description
diff --git a/Documentation/media/uapi/mediactl/media-request-ioc-queue.rst b/Documentation/media/uapi/mediactl/media-request-ioc-queue.rst
new file mode 100644
index 000000000000..6dd2d7fea714
--- /dev/null
+++ b/Documentation/media/uapi/mediactl/media-request-ioc-queue.rst
@@ -0,0 +1,78 @@
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media_request_ioc_queue:
+
+*****************************
+ioctl MEDIA_REQUEST_IOC_QUEUE
+*****************************
+
+Name
+====
+
+MEDIA_REQUEST_IOC_QUEUE - Queue a request
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int request_fd, MEDIA_REQUEST_IOC_QUEUE )
+ :name: MEDIA_REQUEST_IOC_QUEUE
+
+
+Arguments
+=========
+
+``request_fd``
+ File descriptor returned by :ref:`MEDIA_IOC_REQUEST_ALLOC`.
+
+
+Description
+===========
+
+If the media device supports :ref:`requests <media-request-api>`, then
+this request ioctl can be used to queue a previously allocated request.
+
+If the request was successfully queued, then the file descriptor can be
+:ref:`polled <request-func-poll>` to wait for the request to complete.
+
+If the request was already queued before, then ``EBUSY`` is returned.
+Other errors can be returned if the contents of the request contained
+invalid or inconsistent data, see the next section for a list of
+common error codes. On error both the request and driver state are unchanged.
+
+Once a request is queued, then the driver is required to gracefully handle
+errors that occur when the request is applied to the hardware. The
+exception is the ``EIO`` error which signals a fatal error that requires
+the application to stop streaming to reset the hardware state.
+
+It is not allowed to mix queuing requests with queuing buffers directly
+(without a request). ``EBUSY`` will be returned if the first buffer was
+queued directly and you next try to queue a request, or vice versa.
+
+A request must contain at least one buffer, otherwise this ioctl will
+return an ``ENOENT`` error.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EBUSY
+ The request was already queued or the application queued the first
+ buffer directly, but later attempted to use a request. It is not permitted
+ to mix the two APIs.
+ENOENT
+ The request did not contain any buffers. All requests are required
+ to have at least one buffer. This can also be returned if some required
+ configuration is missing in the request.
+ENOMEM
+ Out of memory when allocating internal data structures for this
+ request.
+EINVAL
+ The request has invalid data.
+EIO
+ The hardware is in a bad state. To recover, the application needs to
+ stop streaming to reset the hardware state and then try to restart
+ streaming.
diff --git a/Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst b/Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst
new file mode 100644
index 000000000000..febe888494c8
--- /dev/null
+++ b/Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst
@@ -0,0 +1,51 @@
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media_request_ioc_reinit:
+
+******************************
+ioctl MEDIA_REQUEST_IOC_REINIT
+******************************
+
+Name
+====
+
+MEDIA_REQUEST_IOC_REINIT - Re-initialize a request
+
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int request_fd, MEDIA_REQUEST_IOC_REINIT )
+ :name: MEDIA_REQUEST_IOC_REINIT
+
+
+Arguments
+=========
+
+``request_fd``
+ File descriptor returned by :ref:`MEDIA_IOC_REQUEST_ALLOC`.
+
+Description
+===========
+
+If the media device supports :ref:`requests <media-request-api>`, then
+this request ioctl can be used to re-initialize a previously allocated
+request.
+
+Re-initializing a request will clear any existing data from the request.
+This avoids having to :ref:`close() <request-func-close>` a completed
+request and allocate a new request. Instead the completed request can just
+be re-initialized and it is ready to be used again.
+
+A request can only be re-initialized if it either has not been queued
+yet, or if it was queued and completed. Otherwise it will set ``errno``
+to ``EBUSY``. No other error codes can be returned.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately.
+
+EBUSY
+ The request is queued but not yet completed.
diff --git a/Documentation/media/uapi/mediactl/request-api.rst b/Documentation/media/uapi/mediactl/request-api.rst
new file mode 100644
index 000000000000..5f4a23029c48
--- /dev/null
+++ b/Documentation/media/uapi/mediactl/request-api.rst
@@ -0,0 +1,252 @@
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _media-request-api:
+
+Request API
+===========
+
+The Request API has been designed to allow V4L2 to deal with requirements of
+modern devices (stateless codecs, complex camera pipelines, ...) and APIs
+(Android Codec v2). One such requirement is the ability for devices belonging to
+the same pipeline to reconfigure and collaborate closely on a per-frame basis.
+Another is support of stateless codecs, which require controls to be applied
+to specific frames (aka 'per-frame controls') in order to be used efficiently.
+
+While the initial use-case was V4L2, it can be extended to other subsystems
+as well, as long as they use the media controller.
+
+Supporting these features without the Request API is not always possible and if
+it is, it is terribly inefficient: user-space would have to flush all activity
+on the media pipeline, reconfigure it for the next frame, queue the buffers to
+be processed with that configuration, and wait until they are all available for
+dequeuing before considering the next frame. This defeats the purpose of having
+buffer queues since in practice only one buffer would be queued at a time.
+
+The Request API allows a specific configuration of the pipeline (media
+controller topology + configuration for each media entity) to be associated with
+specific buffers. This allows user-space to schedule several tasks ("requests")
+with different configurations in advance, knowing that the configuration will be
+applied when needed to get the expected result. Configuration values at the time
+of request completion are also available for reading.
+
+Usage
+=====
+
+The Request API extends the Media Controller API and cooperates with
+subsystem-specific APIs to support request usage. At the Media Controller
+level, requests are allocated from the supporting Media Controller device
+node. Their life cycle is then managed through the request file descriptors in
+an opaque way. Configuration data, buffer handles and processing results
+stored in requests are accessed through subsystem-specific APIs extended for
+request support, such as V4L2 APIs that take an explicit ``request_fd``
+parameter.
+
+Request Allocation
+------------------
+
+User-space allocates requests using :ref:`MEDIA_IOC_REQUEST_ALLOC`
+for the media device node. This returns a file descriptor representing the
+request. Typically, several such requests will be allocated.
+
+Request Preparation
+-------------------
+
+Standard V4L2 ioctls can then receive a request file descriptor to express the
+fact that the ioctl is part of said request, and is not to be applied
+immediately. See :ref:`MEDIA_IOC_REQUEST_ALLOC` for a list of ioctls that
+support this. Configurations set with a ``request_fd`` parameter are stored
+instead of being immediately applied, and buffers queued to a request do not
+enter the regular buffer queue until the request itself is queued.
+
+Request Submission
+------------------
+
+Once the configuration and buffers of the request are specified, it can be
+queued by calling :ref:`MEDIA_REQUEST_IOC_QUEUE` on the request file descriptor.
+A request must contain at least one buffer, otherwise ``ENOENT`` is returned.
+A queued request cannot be modified anymore.
+
+.. caution::
+ For :ref:`memory-to-memory devices <codec>` you can use requests only for
+ output buffers, not for capture buffers. Attempting to add a capture buffer
+ to a request will result in an ``EACCES`` error.
+
+If the request contains configurations for multiple entities, individual drivers
+may synchronize so the requested pipeline's topology is applied before the
+buffers are processed. Media controller drivers do a best effort implementation
+since perfect atomicity may not be possible due to hardware limitations.
+
+.. caution::
+
+ It is not allowed to mix queuing requests with directly queuing buffers:
+ whichever method is used first locks this in place until
+ :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` is called or the device is
+ :ref:`closed <func-close>`. Attempts to directly queue a buffer when earlier
+ a buffer was queued via a request or vice versa will result in an ``EBUSY``
+ error.
+
+Controls can still be set without a request and are applied immediately,
+regardless of whether a request is in use or not.
+
+.. caution::
+
+ Setting the same control through a request and also directly can lead to
+ undefined behavior!
+
+User-space can :ref:`poll() <request-func-poll>` a request file descriptor in
+order to wait until the request completes. A request is considered complete
+once all its associated buffers are available for dequeuing and all the
+associated controls have been updated with the values at the time of completion.
+Note that user-space does not need to wait for the request to complete to
+dequeue its buffers: buffers that are available halfway through a request can
+be dequeued independently of the request's state.
+
+A completed request contains the state of the device after the request was
+executed. User-space can query that state by calling
+:ref:`ioctl VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` with the request file
+descriptor. Calling :ref:`ioctl VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` for a
+request that has been queued but not yet completed will return ``EBUSY``
+since the control values might be changed at any time by the driver while the
+request is in flight.
+
+.. _media-request-life-time:
+
+Recycling and Destruction
+-------------------------
+
+Finally, a completed request can either be discarded or be reused. Calling
+:ref:`close() <request-func-close>` on a request file descriptor will make
+that file descriptor unusable and the request will be freed once it is no
+longer in use by the kernel. That is, if the request is queued and then the
+file descriptor is closed, then it won't be freed until the driver completed
+the request.
+
+The :ref:`MEDIA_REQUEST_IOC_REINIT` will clear a request's state and make it
+available again. No state is retained by this operation: the request is as
+if it had just been allocated.
+
+Example for a Codec Device
+--------------------------
+
+For use-cases such as :ref:`codecs <codec>`, the request API can be used
+to associate specific controls to
+be applied by the driver for the OUTPUT buffer, allowing user-space
+to queue many such buffers in advance. It can also take advantage of requests'
+ability to capture the state of controls when the request completes to read back
+information that may be subject to change.
+
+Put into code, after obtaining a request, user-space can assign controls and one
+OUTPUT buffer to it:
+
+.. code-block:: c
+
+ struct v4l2_buffer buf;
+ struct v4l2_ext_controls ctrls;
+ int req_fd;
+ ...
+ if (ioctl(media_fd, MEDIA_IOC_REQUEST_ALLOC, &req_fd))
+ return errno;
+ ...
+ ctrls.which = V4L2_CTRL_WHICH_REQUEST_VAL;
+ ctrls.request_fd = req_fd;
+ if (ioctl(codec_fd, VIDIOC_S_EXT_CTRLS, &ctrls))
+ return errno;
+ ...
+ buf.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+ buf.flags |= V4L2_BUF_FLAG_REQUEST_FD;
+ buf.request_fd = req_fd;
+ if (ioctl(codec_fd, VIDIOC_QBUF, &buf))
+ return errno;
+
+Note that it is not allowed to use the Request API for CAPTURE buffers
+since there are no per-frame settings to report there.
+
+Once the request is fully prepared, it can be queued to the driver:
+
+.. code-block:: c
+
+ if (ioctl(req_fd, MEDIA_REQUEST_IOC_QUEUE))
+ return errno;
+
+User-space can then either wait for the request to complete by calling poll() on
+its file descriptor, or start dequeuing CAPTURE buffers. Most likely, it will
+want to get CAPTURE buffers as soon as possible and this can be done using a
+regular :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`:
+
+.. code-block:: c
+
+ struct v4l2_buffer buf;
+
+ memset(&buf, 0, sizeof(buf));
+ buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ if (ioctl(codec_fd, VIDIOC_DQBUF, &buf))
+ return errno;
+
+Note that this example assumes for simplicity that for every OUTPUT buffer
+there will be one CAPTURE buffer, but this does not have to be the case.
+
+We can then, after ensuring that the request is completed via polling the
+request file descriptor, query control values at the time of its completion via
+a call to :ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`.
+This is particularly useful for volatile controls for which we want to
+query values as soon as the capture buffer is produced.
+
+.. code-block:: c
+
+ struct pollfd pfd = { .events = POLLPRI, .fd = req_fd };
+ poll(&pfd, 1, -1);
+ ...
+ ctrls.which = V4L2_CTRL_WHICH_REQUEST_VAL;
+ ctrls.request_fd = req_fd;
+ if (ioctl(codec_fd, VIDIOC_G_EXT_CTRLS, &ctrls))
+ return errno;
+
+Once we don't need the request anymore, we can either recycle it for reuse with
+:ref:`MEDIA_REQUEST_IOC_REINIT`...
+
+.. code-block:: c
+
+ if (ioctl(req_fd, MEDIA_REQUEST_IOC_REINIT))
+ return errno;
+
+... or close its file descriptor to completely dispose of it.
+
+.. code-block:: c
+
+ close(req_fd);
+
+Example for a Simple Capture Device
+-----------------------------------
+
+With a simple capture device, requests can be used to specify controls to apply
+for a given CAPTURE buffer.
+
+.. code-block:: c
+
+ struct v4l2_buffer buf;
+ struct v4l2_ext_controls ctrls;
+ int req_fd;
+ ...
+ if (ioctl(media_fd, MEDIA_IOC_REQUEST_ALLOC, &req_fd))
+ return errno;
+ ...
+ ctrls.which = V4L2_CTRL_WHICH_REQUEST_VAL;
+ ctrls.request_fd = req_fd;
+ if (ioctl(camera_fd, VIDIOC_S_EXT_CTRLS, &ctrls))
+ return errno;
+ ...
+ buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ buf.flags |= V4L2_BUF_FLAG_REQUEST_FD;
+ buf.request_fd = req_fd;
+ if (ioctl(camera_fd, VIDIOC_QBUF, &buf))
+ return errno;
+
+Once the request is fully prepared, it can be queued to the driver:
+
+.. code-block:: c
+
+ if (ioctl(req_fd, MEDIA_REQUEST_IOC_QUEUE))
+ return errno;
+
+User-space can then dequeue buffers, wait for the request completion, query
+controls and recycle the request as in the M2M example above.
diff --git a/Documentation/media/uapi/mediactl/request-func-close.rst b/Documentation/media/uapi/mediactl/request-func-close.rst
new file mode 100644
index 000000000000..098d7f2b9548
--- /dev/null
+++ b/Documentation/media/uapi/mediactl/request-func-close.rst
@@ -0,0 +1,49 @@
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _request-func-close:
+
+***************
+request close()
+***************
+
+Name
+====
+
+request-close - Close a request file descriptor
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+ #include <unistd.h>
+
+
+.. c:function:: int close( int fd )
+ :name: req-close
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by :ref:`MEDIA_IOC_REQUEST_ALLOC`.
+
+
+Description
+===========
+
+Closes the request file descriptor. Resources associated with the request
+are freed once all file descriptors associated with the request are closed
+and the driver has completed the request.
+See :ref:`here <media-request-life-time>` for more information.
+
+
+Return Value
+============
+
+:ref:`close() <request-func-close>` returns 0 on success. On error, -1 is
+returned, and ``errno`` is set appropriately. Possible error codes are:
+
+EBADF
+ ``fd`` is not a valid open file descriptor.
diff --git a/Documentation/media/uapi/mediactl/request-func-ioctl.rst b/Documentation/media/uapi/mediactl/request-func-ioctl.rst
new file mode 100644
index 000000000000..ff7b072a6999
--- /dev/null
+++ b/Documentation/media/uapi/mediactl/request-func-ioctl.rst
@@ -0,0 +1,67 @@
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _request-func-ioctl:
+
+***************
+request ioctl()
+***************
+
+Name
+====
+
+request-ioctl - Control a request file descriptor
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+ #include <sys/ioctl.h>
+
+
+.. c:function:: int ioctl( int fd, int cmd, void *argp )
+ :name: req-ioctl
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by :ref:`MEDIA_IOC_REQUEST_ALLOC`.
+
+``cmd``
+ The request ioctl command code as defined in the media.h header file, for
+ example :ref:`MEDIA_REQUEST_IOC_QUEUE`.
+
+``argp``
+ Pointer to a request-specific structure.
+
+
+Description
+===========
+
+The :ref:`ioctl() <request-func-ioctl>` function manipulates request
+parameters. The argument ``fd`` must be an open file descriptor.
+
+The ioctl ``cmd`` code specifies the request function to be called. It
+has encoded in it whether the argument is an input, output or read/write
+parameter, and the size of the argument ``argp`` in bytes.
+
+Macros and structures definitions specifying request ioctl commands and
+their parameters are located in the media.h header file. All request ioctl
+commands, their respective function and parameters are specified in
+:ref:`media-user-func`.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+Command-specific error codes are listed in the individual command
+descriptions.
+
+When an ioctl that takes an output or read/write parameter fails, the
+parameter remains unmodified.
diff --git a/Documentation/media/uapi/mediactl/request-func-poll.rst b/Documentation/media/uapi/mediactl/request-func-poll.rst
new file mode 100644
index 000000000000..85191254f381
--- /dev/null
+++ b/Documentation/media/uapi/mediactl/request-func-poll.rst
@@ -0,0 +1,77 @@
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+
+.. _request-func-poll:
+
+**************
+request poll()
+**************
+
+Name
+====
+
+request-poll - Wait for some event on a file descriptor
+
+
+Synopsis
+========
+
+.. code-block:: c
+
+ #include <sys/poll.h>
+
+
+.. c:function:: int poll( struct pollfd *ufds, unsigned int nfds, int timeout )
+ :name: request-poll
+
+Arguments
+=========
+
+``ufds``
+ List of file descriptor events to be watched
+
+``nfds``
+ Number of file descriptor events at the \*ufds array
+
+``timeout``
+ Timeout to wait for events
+
+
+Description
+===========
+
+With the :c:func:`poll() <request-func-poll>` function applications can wait
+for a request to complete.
+
+On success :c:func:`poll() <request-func-poll>` returns the number of file
+descriptors that have been selected (that is, file descriptors for which the
+``revents`` field of the respective struct :c:type:`pollfd`
+is non-zero). Request file descriptor set the ``POLLPRI`` flag in ``revents``
+when the request was completed. When the function times out it returns
+a value of zero, on failure it returns -1 and the ``errno`` variable is
+set appropriately.
+
+Attempting to poll for a request that is not yet queued will
+set the ``POLLERR`` flag in ``revents``.
+
+
+Return Value
+============
+
+On success, :c:func:`poll() <request-func-poll>` returns the number of
+structures which have non-zero ``revents`` fields, or zero if the call
+timed out. On error -1 is returned, and the ``errno`` variable is set
+appropriately:
+
+``EBADF``
+ One or more of the ``ufds`` members specify an invalid file
+ descriptor.
+
+``EFAULT``
+ ``ufds`` references an inaccessible memory area.
+
+``EINTR``
+ The call was interrupted by a signal.
+
+``EINVAL``
+ The ``nfds`` value exceeds the ``RLIMIT_NOFILE`` value. Use
+ ``getrlimit()`` to obtain this value.
diff --git a/Documentation/media/uapi/v4l/biblio.rst b/Documentation/media/uapi/v4l/biblio.rst
index 1cedcfc04327..386d6cf83e9c 100644
--- a/Documentation/media/uapi/v4l/biblio.rst
+++ b/Documentation/media/uapi/v4l/biblio.rst
@@ -226,16 +226,6 @@ xvYCC
:author: International Electrotechnical Commission (http://www.iec.ch)
-.. _adobergb:
-
-AdobeRGB
-========
-
-
-:title: Adobe© RGB (1998) Color Image Encoding Version 2005-05
-
-:author: Adobe Systems Incorporated (http://www.adobe.com)
-
.. _oprgb:
opRGB
diff --git a/Documentation/media/uapi/v4l/buffer.rst b/Documentation/media/uapi/v4l/buffer.rst
index e2c85ddc990b..2e266d32470a 100644
--- a/Documentation/media/uapi/v4l/buffer.rst
+++ b/Documentation/media/uapi/v4l/buffer.rst
@@ -306,10 +306,23 @@ struct v4l2_buffer
- A place holder for future extensions. Drivers and applications
must set this to 0.
* - __u32
- - ``reserved``
+ - ``request_fd``
-
- - A place holder for future extensions. Drivers and applications
- must set this to 0.
+ - The file descriptor of the request to queue the buffer to. If the flag
+ ``V4L2_BUF_FLAG_REQUEST_FD`` is set, then the buffer will be
+ queued to this request. If the flag is not set, then this field will
+ be ignored.
+
+ The ``V4L2_BUF_FLAG_REQUEST_FD`` flag and this field are only used by
+ :ref:`ioctl VIDIOC_QBUF <VIDIOC_QBUF>` and ignored by other ioctls that
+ take a :c:type:`v4l2_buffer` as argument.
+
+ Applications should not set ``V4L2_BUF_FLAG_REQUEST_FD`` for any ioctls
+ other than :ref:`VIDIOC_QBUF <VIDIOC_QBUF>`.
+
+ If the device does not support requests, then ``EACCES`` will be returned.
+ If requests are supported but an invalid request file descriptor is
+ given, then ``EINVAL`` will be returned.
@@ -514,6 +527,11 @@ Buffer Flags
streaming may continue as normal and the buffer may be reused
normally. Drivers set this flag when the ``VIDIOC_DQBUF`` ioctl is
called.
+ * .. _`V4L2-BUF-FLAG-IN-REQUEST`:
+
+ - ``V4L2_BUF_FLAG_IN_REQUEST``
+ - 0x00000080
+ - This buffer is part of a request that hasn't been queued yet.
* .. _`V4L2-BUF-FLAG-KEYFRAME`:
- ``V4L2_BUF_FLAG_KEYFRAME``
@@ -589,6 +607,11 @@ Buffer Flags
the format. Any Any subsequent call to the
:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl will not block anymore,
but return an ``EPIPE`` error code.
+ * .. _`V4L2-BUF-FLAG-REQUEST-FD`:
+
+ - ``V4L2_BUF_FLAG_REQUEST_FD``
+ - 0x00800000
+ - The ``request_fd`` field contains a valid file descriptor.
* .. _`V4L2-BUF-FLAG-TIMESTAMP-MASK`:
- ``V4L2_BUF_FLAG_TIMESTAMP_MASK``
diff --git a/Documentation/media/uapi/v4l/colorspaces-defs.rst b/Documentation/media/uapi/v4l/colorspaces-defs.rst
index 410907fe9415..f24615544792 100644
--- a/Documentation/media/uapi/v4l/colorspaces-defs.rst
+++ b/Documentation/media/uapi/v4l/colorspaces-defs.rst
@@ -51,8 +51,8 @@ whole range, 0-255, dividing the angular value by 1.41. The enum
- See :ref:`col-rec709`.
* - ``V4L2_COLORSPACE_SRGB``
- See :ref:`col-srgb`.
- * - ``V4L2_COLORSPACE_ADOBERGB``
- - See :ref:`col-adobergb`.
+ * - ``V4L2_COLORSPACE_OPRGB``
+ - See :ref:`col-oprgb`.
* - ``V4L2_COLORSPACE_BT2020``
- See :ref:`col-bt2020`.
* - ``V4L2_COLORSPACE_DCI_P3``
@@ -90,8 +90,8 @@ whole range, 0-255, dividing the angular value by 1.41. The enum
- Use the Rec. 709 transfer function.
* - ``V4L2_XFER_FUNC_SRGB``
- Use the sRGB transfer function.
- * - ``V4L2_XFER_FUNC_ADOBERGB``
- - Use the AdobeRGB transfer function.
+ * - ``V4L2_XFER_FUNC_OPRGB``
+ - Use the opRGB transfer function.
* - ``V4L2_XFER_FUNC_SMPTE240M``
- Use the SMPTE 240M transfer function.
* - ``V4L2_XFER_FUNC_NONE``
diff --git a/Documentation/media/uapi/v4l/colorspaces-details.rst b/Documentation/media/uapi/v4l/colorspaces-details.rst
index b5d551b9cc8f..09fabf4cd412 100644
--- a/Documentation/media/uapi/v4l/colorspaces-details.rst
+++ b/Documentation/media/uapi/v4l/colorspaces-details.rst
@@ -290,15 +290,14 @@ Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range
170M/BT.601. The Y'CbCr quantization is limited range.
-.. _col-adobergb:
+.. _col-oprgb:
-Colorspace Adobe RGB (V4L2_COLORSPACE_ADOBERGB)
+Colorspace opRGB (V4L2_COLORSPACE_OPRGB)
===============================================
-The :ref:`adobergb` standard defines the colorspace used by computer
-graphics that use the AdobeRGB colorspace. This is also known as the
-:ref:`oprgb` standard. The default transfer function is
-``V4L2_XFER_FUNC_ADOBERGB``. The default Y'CbCr encoding is
+The :ref:`oprgb` standard defines the colorspace used by computer
+graphics that use the opRGB colorspace. The default transfer function is
+``V4L2_XFER_FUNC_OPRGB``. The default Y'CbCr encoding is
``V4L2_YCBCR_ENC_601``. The default Y'CbCr quantization is limited
range.
@@ -312,7 +311,7 @@ The chromaticities of the primary colors and the white reference are:
.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-.. flat-table:: Adobe RGB Chromaticities
+.. flat-table:: opRGB Chromaticities
:header-rows: 1
:stub-columns: 0
:widths: 1 1 2
diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst
index 9f7312bf3365..65a1d873196b 100644
--- a/Documentation/media/uapi/v4l/extended-controls.rst
+++ b/Documentation/media/uapi/v4l/extended-controls.rst
@@ -1497,6 +1497,182 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
+.. _v4l2-mpeg-mpeg2:
+
+``V4L2_CID_MPEG_VIDEO_MPEG2_SLICE_PARAMS (struct)``
+ Specifies the slice parameters (as extracted from the bitstream) for the
+ associated MPEG-2 slice data. This includes the necessary parameters for
+ configuring a stateless hardware decoding pipeline for MPEG-2.
+ The bitstream parameters are defined according to :ref:`mpeg2part2`.
+
+.. c:type:: v4l2_ctrl_mpeg2_slice_params
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_mpeg2_slice_params
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u32
+ - ``bit_size``
+ - Size (in bits) of the current slice data.
+ * - __u32
+ - ``data_bit_offset``
+ - Offset (in bits) to the video data in the current slice data.
+ * - struct :c:type:`v4l2_mpeg2_sequence`
+ - ``sequence``
+ - Structure with MPEG-2 sequence metadata, merging relevant fields from
+ the sequence header and sequence extension parts of the bitstream.
+ * - struct :c:type:`v4l2_mpeg2_picture`
+ - ``picture``
+ - Structure with MPEG-2 picture metadata, merging relevant fields from
+ the picture header and picture coding extension parts of the bitstream.
+ * - __u8
+ - ``quantiser_scale_code``
+ - Code used to determine the quantization scale to use for the IDCT.
+ * - __u8
+ - ``backward_ref_index``
+ - Index for the V4L2 buffer to use as backward reference, used with
+ B-coded and P-coded frames.
+ * - __u8
+ - ``forward_ref_index``
+ - Index for the V4L2 buffer to use as forward reference, used with
+ B-coded frames.
+
+.. c:type:: v4l2_mpeg2_sequence
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_mpeg2_sequence
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u16
+ - ``horizontal_size``
+ - The width of the displayable part of the frame's luminance component.
+ * - __u16
+ - ``vertical_size``
+ - The height of the displayable part of the frame's luminance component.
+ * - __u32
+ - ``vbv_buffer_size``
+ - Used to calculate the required size of the video buffering verifier,
+ defined (in bits) as: 16 * 1024 * vbv_buffer_size.
+ * - __u8
+ - ``profile_and_level_indication``
+ - The current profile and level indication as extracted from the
+ bitstream.
+ * - __u8
+ - ``progressive_sequence``
+ - Indication that all the frames for the sequence are progressive instead
+ of interlaced.
+ * - __u8
+ - ``chroma_format``
+ - The chrominance sub-sampling format (1: 4:2:0, 2: 4:2:2, 3: 4:4:4).
+
+.. c:type:: v4l2_mpeg2_picture
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_mpeg2_picture
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u8
+ - ``picture_coding_type``
+ - Picture coding type for the frame covered by the current slice
+ (V4L2_MPEG2_PICTURE_CODING_TYPE_I, V4L2_MPEG2_PICTURE_CODING_TYPE_P or
+ V4L2_MPEG2_PICTURE_CODING_TYPE_B).
+ * - __u8
+ - ``f_code[2][2]``
+ - Motion vector codes.
+ * - __u8
+ - ``intra_dc_precision``
+ - Precision of Discrete Cosine transform (0: 8 bits precision,
+ 1: 9 bits precision, 2: 10 bits precision, 3: 11 bits precision).
+ * - __u8
+ - ``picture_structure``
+ - Picture structure (1: interlaced top field, 2: interlaced bottom field,
+ 3: progressive frame).
+ * - __u8
+ - ``top_field_first``
+ - If set to 1 and interlaced stream, top field is output first.
+ * - __u8
+ - ``frame_pred_frame_dct``
+ - If set to 1, only frame-DCT and frame prediction are used.
+ * - __u8
+ - ``concealment_motion_vectors``
+ - If set to 1, motion vectors are coded for intra macroblocks.
+ * - __u8
+ - ``q_scale_type``
+ - This flag affects the inverse quantization process.
+ * - __u8
+ - ``intra_vlc_format``
+ - This flag affects the decoding of transform coefficient data.
+ * - __u8
+ - ``alternate_scan``
+ - This flag affects the decoding of transform coefficient data.
+ * - __u8
+ - ``repeat_first_field``
+ - This flag affects the decoding process of progressive frames.
+ * - __u8
+ - ``progressive_frame``
+ - Indicates whether the current frame is progressive.
+
+``V4L2_CID_MPEG_VIDEO_MPEG2_QUANTIZATION (struct)``
+ Specifies quantization matrices (as extracted from the bitstream) for the
+ associated MPEG-2 slice data.
+
+.. c:type:: v4l2_ctrl_mpeg2_quantization
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_mpeg2_quantization
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u8
+ - ``load_intra_quantiser_matrix``
+ - One bit to indicate whether to load the ``intra_quantiser_matrix`` data.
+ * - __u8
+ - ``load_non_intra_quantiser_matrix``
+ - One bit to indicate whether to load the ``non_intra_quantiser_matrix``
+ data.
+ * - __u8
+ - ``load_chroma_intra_quantiser_matrix``
+ - One bit to indicate whether to load the
+ ``chroma_intra_quantiser_matrix`` data, only relevant for non-4:2:0 YUV
+ formats.
+ * - __u8
+ - ``load_chroma_non_intra_quantiser_matrix``
+ - One bit to indicate whether to load the
+ ``chroma_non_intra_quantiser_matrix`` data, only relevant for non-4:2:0
+ YUV formats.
+ * - __u8
+ - ``intra_quantiser_matrix[64]``
+ - The quantization matrix coefficients for intra-coded frames, in zigzag
+ scanning order. It is relevant for both luma and chroma components,
+ although it can be superseded by the chroma-specific matrix for
+ non-4:2:0 YUV formats.
+ * - __u8
+ - ``non_intra_quantiser_matrix[64]``
+ - The quantization matrix coefficients for non-intra-coded frames, in
+ zigzag scanning order. It is relevant for both luma and chroma
+ components, although it can be superseded by the chroma-specific matrix
+ for non-4:2:0 YUV formats.
+ * - __u8
+ - ``chroma_intra_quantiser_matrix[64]``
+ - The quantization matrix coefficients for the chominance component of
+ intra-coded frames, in zigzag scanning order. Only relevant for
+ non-4:2:0 YUV formats.
+ * - __u8
+ - ``chroma_non_intra_quantiser_matrix[64]``
+ - The quantization matrix coefficients for the chrominance component of
+ non-intra-coded frames, in zigzag scanning order. Only relevant for
+ non-4:2:0 YUV formats.
MFC 5.1 MPEG Controls
---------------------
diff --git a/Documentation/media/uapi/v4l/func-poll.rst b/Documentation/media/uapi/v4l/func-poll.rst
index 360bc6523ae2..967fe8920729 100644
--- a/Documentation/media/uapi/v4l/func-poll.rst
+++ b/Documentation/media/uapi/v4l/func-poll.rst
@@ -113,4 +113,5 @@ EINTR
The call was interrupted by a signal.
EINVAL
- The ``nfds`` argument is greater than ``OPEN_MAX``.
+ The ``nfds`` value exceeds the ``RLIMIT_NOFILE`` value. Use
+ ``getrlimit()`` to obtain this value.
diff --git a/Documentation/media/uapi/v4l/meta-formats.rst b/Documentation/media/uapi/v4l/meta-formats.rst
index 0c4e1ecf5879..cf971d5ad9ea 100644
--- a/Documentation/media/uapi/v4l/meta-formats.rst
+++ b/Documentation/media/uapi/v4l/meta-formats.rst
@@ -12,6 +12,7 @@ These formats are used for the :ref:`metadata` interface only.
.. toctree::
:maxdepth: 1
+ pixfmt-meta-d4xx
pixfmt-meta-uvc
pixfmt-meta-vsp1-hgo
pixfmt-meta-vsp1-hgt
diff --git a/Documentation/media/uapi/v4l/pixfmt-compressed.rst b/Documentation/media/uapi/v4l/pixfmt-compressed.rst
index d382e7a5c38e..ba0f6c49d9bf 100644
--- a/Documentation/media/uapi/v4l/pixfmt-compressed.rst
+++ b/Documentation/media/uapi/v4l/pixfmt-compressed.rst
@@ -60,6 +60,22 @@ Compressed Formats
- ``V4L2_PIX_FMT_MPEG2``
- 'MPG2'
- MPEG2 video elementary stream.
+ * .. _V4L2-PIX-FMT-MPEG2-SLICE:
+
+ - ``V4L2_PIX_FMT_MPEG2_SLICE``
+ - 'MG2S'
+ - MPEG-2 parsed slice data, as extracted from the MPEG-2 bitstream.
+ This format is adapted for stateless video decoders that implement a
+ MPEG-2 pipeline (using the :ref:`codec` and :ref:`media-request-api`).
+ Metadata associated with the frame to decode is required to be passed
+ through the ``V4L2_CID_MPEG_VIDEO_MPEG2_SLICE_PARAMS`` control and
+ quantization matrices can optionally be specified through the
+ ``V4L2_CID_MPEG_VIDEO_MPEG2_QUANTIZATION`` control.
+ See the :ref:`associated Codec Control IDs <v4l2-mpeg-mpeg2>`.
+ Exactly one output and one capture buffer must be provided for use with
+ this pixel format. The output buffer must contain the appropriate number
+ of macroblocks to decode a full corresponding frame to the matching
+ capture buffer.
* .. _V4L2-PIX-FMT-MPEG4:
- ``V4L2_PIX_FMT_MPEG4``
@@ -101,4 +117,4 @@ Compressed Formats
- 'FWHT'
- Video elementary stream using a codec based on the Fast Walsh Hadamard
Transform. This codec is implemented by the vicodec ('Virtual Codec')
- driver. See the vicodec-codec.h header for more details.
+ driver. See the codec-fwht.h header for more details.
diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-d4xx.rst b/Documentation/media/uapi/v4l/pixfmt-meta-d4xx.rst
new file mode 100644
index 000000000000..63bf1a2c9116
--- /dev/null
+++ b/Documentation/media/uapi/v4l/pixfmt-meta-d4xx.rst
@@ -0,0 +1,210 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _v4l2-meta-fmt-d4xx:
+
+*******************************
+V4L2_META_FMT_D4XX ('D4XX')
+*******************************
+
+Intel D4xx UVC Cameras Metadata
+
+
+Description
+===========
+
+Intel D4xx (D435 and other) cameras include per-frame metadata in their UVC
+payload headers, following the Microsoft(R) UVC extension proposal [1_]. That
+means, that the private D4XX metadata, following the standard UVC header, is
+organised in blocks. D4XX cameras implement several standard block types,
+proposed by Microsoft, and several proprietary ones. Supported standard metadata
+types are MetadataId_CaptureStats (ID 3), MetadataId_CameraExtrinsics (ID 4),
+and MetadataId_CameraIntrinsics (ID 5). For their description see [1_]. This
+document describes proprietary metadata types, used by D4xx cameras.
+
+V4L2_META_FMT_D4XX buffers follow the metadata buffer layout of
+V4L2_META_FMT_UVC with the only difference, that it also includes proprietary
+payload header data. D4xx cameras use bulk transfers and only send one payload
+per frame, therefore their headers cannot be larger than 255 bytes.
+
+Below are proprietary Microsoft style metadata types, used by D4xx cameras,
+where all fields are in little endian order:
+
+.. flat-table:: D4xx metadata
+ :widths: 1 4
+ :header-rows: 1
+ :stub-columns: 0
+
+ * - Field
+ - Description
+ * - :cspan:`1` *Depth Control*
+ * - __u32 ID
+ - 0x80000000
+ * - __u32 Size
+ - Size in bytes (currently 56)
+ * - __u32 Version
+ - Version of this structure. The documentation herein corresponds to
+ version xxx. The version number will be incremented when new fields are
+ added.
+ * - __u32 Flags
+ - A bitmask of flags: see [2_] below
+ * - __u32 Gain
+ - Gain value in internal units, same as the V4L2_CID_GAIN control, used to
+ capture the frame
+ * - __u32 Exposure
+ - Exposure time (in microseconds) used to capture the frame
+ * - __u32 Laser power
+ - Power of the laser LED 0-360, used for depth measurement
+ * - __u32 AE mode
+ - 0: manual; 1: automatic exposure
+ * - __u32 Exposure priority
+ - Exposure priority value: 0 - constant frame rate
+ * - __u32 AE ROI left
+ - Left border of the AE Region of Interest (all ROI values are in pixels
+ and lie between 0 and maximum width or height respectively)
+ * - __u32 AE ROI right
+ - Right border of the AE Region of Interest
+ * - __u32 AE ROI top
+ - Top border of the AE Region of Interest
+ * - __u32 AE ROI bottom
+ - Bottom border of the AE Region of Interest
+ * - __u32 Preset
+ - Preset selector value, default: 0, unless changed by the user
+ * - __u32 Laser mode
+ - 0: off, 1: on
+ * - :cspan:`1` *Capture Timing*
+ * - __u32 ID
+ - 0x80000001
+ * - __u32 Size
+ - Size in bytes (currently 40)
+ * - __u32 Version
+ - Version of this structure. The documentation herein corresponds to
+ version xxx. The version number will be incremented when new fields are
+ added.
+ * - __u32 Flags
+ - A bitmask of flags: see [3_] below
+ * - __u32 Frame counter
+ - Monotonically increasing counter
+ * - __u32 Optical time
+ - Time in microseconds from the beginning of a frame till its middle
+ * - __u32 Readout time
+ - Time, used to read out a frame in microseconds
+ * - __u32 Exposure time
+ - Frame exposure time in microseconds
+ * - __u32 Frame interval
+ - In microseconds = 1000000 / framerate
+ * - __u32 Pipe latency
+ - Time in microseconds from start of frame to data in USB buffer
+ * - :cspan:`1` *Configuration*
+ * - __u32 ID
+ - 0x80000002
+ * - __u32 Size
+ - Size in bytes (currently 40)
+ * - __u32 Version
+ - Version of this structure. The documentation herein corresponds to
+ version xxx. The version number will be incremented when new fields are
+ added.
+ * - __u32 Flags
+ - A bitmask of flags: see [4_] below
+ * - __u8 Hardware type
+ - Camera hardware version [5_]
+ * - __u8 SKU ID
+ - Camera hardware configuration [6_]
+ * - __u32 Cookie
+ - Internal synchronisation
+ * - __u16 Format
+ - Image format code [7_]
+ * - __u16 Width
+ - Width in pixels
+ * - __u16 Height
+ - Height in pixels
+ * - __u16 Framerate
+ - Requested frame rate per second
+ * - __u16 Trigger
+ - Byte 0: bit 0: depth and RGB are synchronised, bit 1: external trigger
+
+.. _1:
+
+[1] https://docs.microsoft.com/en-us/windows-hardware/drivers/stream/uvc-extensions-1-5
+
+.. _2:
+
+[2] Depth Control flags specify which fields are valid: ::
+
+ 0x00000001 Gain
+ 0x00000002 Exposure
+ 0x00000004 Laser power
+ 0x00000008 AE mode
+ 0x00000010 Exposure priority
+ 0x00000020 AE ROI
+ 0x00000040 Preset
+
+.. _3:
+
+[3] Capture Timing flags specify which fields are valid: ::
+
+ 0x00000001 Frame counter
+ 0x00000002 Optical time
+ 0x00000004 Readout time
+ 0x00000008 Exposure time
+ 0x00000010 Frame interval
+ 0x00000020 Pipe latency
+
+.. _4:
+
+[4] Configuration flags specify which fields are valid: ::
+
+ 0x00000001 Hardware type
+ 0x00000002 SKU ID
+ 0x00000004 Cookie
+ 0x00000008 Format
+ 0x00000010 Width
+ 0x00000020 Height
+ 0x00000040 Framerate
+ 0x00000080 Trigger
+ 0x00000100 Cal count
+
+.. _5:
+
+[5] Camera model: ::
+
+ 0 DS5
+ 1 IVCAM2
+
+.. _6:
+
+[6] 8-bit camera hardware configuration bitfield: ::
+
+ [1:0] depthCamera
+ 00: no depth
+ 01: standard depth
+ 10: wide depth
+ 11: reserved
+ [2] depthIsActive - has a laser projector
+ [3] RGB presence
+ [4] Inertial Measurement Unit (IMU) presence
+ [5] projectorType
+ 0: HPTG
+ 1: Princeton
+ [6] 0: a projector, 1: an LED
+ [7] reserved
+
+.. _7:
+
+[7] Image format codes per video streaming interface:
+
+Depth: ::
+
+ 1 Z16
+ 2 Z
+
+Left sensor: ::
+
+ 1 Y8
+ 2 UYVY
+ 3 R8L8
+ 4 Calibration
+ 5 W10
+
+Fish Eye sensor: ::
+
+ 1 RAW8
diff --git a/Documentation/media/uapi/v4l/pixfmt-reserved.rst b/Documentation/media/uapi/v4l/pixfmt-reserved.rst
index 38af1472a4b4..0c399858bda2 100644
--- a/Documentation/media/uapi/v4l/pixfmt-reserved.rst
+++ b/Documentation/media/uapi/v4l/pixfmt-reserved.rst
@@ -243,7 +243,20 @@ please make a proposal on the linux-media mailing list.
It is an opaque intermediate format and the MDP hardware must be
used to convert ``V4L2_PIX_FMT_MT21C`` to ``V4L2_PIX_FMT_NV12M``,
``V4L2_PIX_FMT_YUV420M`` or ``V4L2_PIX_FMT_YVU420``.
-
+ * .. _V4L2-PIX-FMT-SUNXI-TILED-NV12:
+
+ - ``V4L2_PIX_FMT_SUNXI_TILED_NV12``
+ - 'ST12'
+ - Two-planar NV12-based format used by the video engine found on Allwinner
+ (codenamed sunxi) platforms, with 32x32 tiles for the luminance plane
+ and 32x64 tiles for the chrominance plane. The data in each tile is
+ stored in linear order, within the tile bounds. Each tile follows the
+ previous one linearly in memory (from left to right, top to bottom).
+
+ The associated buffer dimensions are aligned to match an integer number
+ of tiles, resulting in 32-aligned resolutions for the luminance plane
+ and 16-aligned resolutions for the chrominance plane (with 2x2
+ subsampling).
.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
diff --git a/Documentation/media/uapi/v4l/vidioc-create-bufs.rst b/Documentation/media/uapi/v4l/vidioc-create-bufs.rst
index a39e18d69511..eadf6f757fbf 100644
--- a/Documentation/media/uapi/v4l/vidioc-create-bufs.rst
+++ b/Documentation/media/uapi/v4l/vidioc-create-bufs.rst
@@ -102,7 +102,19 @@ than the number requested.
- ``format``
- Filled in by the application, preserved by the driver.
* - __u32
- - ``reserved``\ [8]
+ - ``capabilities``
+ - Set by the driver. If 0, then the driver doesn't support
+ capabilities. In that case all you know is that the driver is
+ guaranteed to support ``V4L2_MEMORY_MMAP`` and *might* support
+ other :c:type:`v4l2_memory` types. It will not support any others
+ capabilities. See :ref:`here <v4l2-buf-capabilities>` for a list of the
+ capabilities.
+
+ If you want to just query the capabilities without making any
+ other changes, then set ``count`` to 0, ``memory`` to
+ ``V4L2_MEMORY_MMAP`` and ``format.type`` to the buffer type.
+ * - __u32
+ - ``reserved``\ [7]
- A place holder for future extensions. Drivers and applications
must set the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-cropcap.rst b/Documentation/media/uapi/v4l/vidioc-cropcap.rst
index a65dbec6b20b..0a7b8287fd38 100644
--- a/Documentation/media/uapi/v4l/vidioc-cropcap.rst
+++ b/Documentation/media/uapi/v4l/vidioc-cropcap.rst
@@ -58,7 +58,7 @@ overlay devices.
- Type of the data stream, set by the application. Only these types
are valid here: ``V4L2_BUF_TYPE_VIDEO_CAPTURE``, ``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``,
``V4L2_BUF_TYPE_VIDEO_OUTPUT``, ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE`` and
- ``V4L2_BUF_TYPE_VIDEO_OVERLAY``. See :c:type:`v4l2_buf_type` and the note above.
+ ``V4L2_BUF_TYPE_VIDEO_OVERLAY``. See :c:type:`v4l2_buf_type` and the note below.
* - struct :ref:`v4l2_rect <v4l2-rect-crop>`
- ``bounds``
- Defines the window within capturing or output is possible, this
diff --git a/Documentation/media/uapi/v4l/vidioc-dqevent.rst b/Documentation/media/uapi/v4l/vidioc-dqevent.rst
index cb3565f36793..04416b6943c0 100644
--- a/Documentation/media/uapi/v4l/vidioc-dqevent.rst
+++ b/Documentation/media/uapi/v4l/vidioc-dqevent.rst
@@ -379,7 +379,17 @@ call.
- 0x0001
- This event gets triggered when a resolution change is detected at
an input. This can come from an input connector or from a video
- decoder.
+ decoder. Applications will have to query the new resolution (if
+ any, the signal may also have been lost).
+
+ *Important*: even if the new video timings appear identical to the old
+ ones, receiving this event indicates that there was an issue with the
+ video signal and you must stop and restart streaming
+ (:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>`
+ followed by :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>`). The reason is
+ that many devices are not able to recover from a temporary loss of
+ signal and so restarting streaming I/O is required in order for the
+ hardware to synchronize to the video signal.
Return Value
diff --git a/Documentation/media/uapi/v4l/vidioc-g-crop.rst b/Documentation/media/uapi/v4l/vidioc-g-crop.rst
index a6ed43ba9ca3..b95ba6743cbd 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-crop.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-crop.rst
@@ -84,7 +84,7 @@ When cropping is not supported then no parameters are changed and
- Type of the data stream, set by the application. Only these types
are valid here: ``V4L2_BUF_TYPE_VIDEO_CAPTURE``, ``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``,
``V4L2_BUF_TYPE_VIDEO_OUTPUT``, ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE`` and
- ``V4L2_BUF_TYPE_VIDEO_OVERLAY``. See :c:type:`v4l2_buf_type` and the note above.
+ ``V4L2_BUF_TYPE_VIDEO_OVERLAY``. See :c:type:`v4l2_buf_type` and the note below.
* - struct :c:type:`v4l2_rect`
- ``c``
- Cropping rectangle. The same co-ordinate system as for struct
diff --git a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst
index 1a034e825161..35cba2c8d459 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst
@@ -257,14 +257,19 @@ EBUSY
will also be cleared. This is a read-only flag, applications must
not set this.
* - ``V4L2_DV_FL_REDUCED_FPS``
- - CEA-861 specific: only valid for video transmitters, the flag is
- cleared by receivers. It is also only valid for formats with the
- ``V4L2_DV_FL_CAN_REDUCE_FPS`` flag set, for other formats the
- flag will be cleared by the driver. If the application sets this
- flag, then the pixelclock used to set up the transmitter is
- divided by 1.001 to make it compatible with NTSC framerates. If
- the transmitter can't generate such frequencies, then the flag
- will also be cleared.
+ - CEA-861 specific: only valid for video transmitters or video
+ receivers that have the ``V4L2_DV_FL_CAN_DETECT_REDUCED_FPS``
+ set. This flag is cleared otherwise. It is also only valid for
+ formats with the ``V4L2_DV_FL_CAN_REDUCE_FPS`` flag set, for other
+ formats the flag will be cleared by the driver.
+
+ If the application sets this flag for a transmitter, then the
+ pixelclock used to set up the transmitter is divided by 1.001 to
+ make it compatible with NTSC framerates. If the transmitter can't
+ generate such frequencies, then the flag will be cleared.
+
+ If a video receiver detects that the format uses a reduced framerate,
+ then it will set this flag to signal this to the application.
* - ``V4L2_DV_FL_HALF_LINE``
- Specific to interlaced formats: if set, then the vertical
backporch of field 1 (aka the odd field) is really one half-line
@@ -294,3 +299,9 @@ EBUSY
- If set, then the hdmi_vic field is valid and contains the Video
Identification Code as per the HDMI standard (HDMI Vendor Specific
InfoFrame).
+ * - ``V4L2_DV_FL_CAN_DETECT_REDUCED_FPS``
+ - CEA-861 specific: only valid for video receivers, the flag is
+ cleared by transmitters.
+ If set, then the hardware can detect the difference between
+ regular framerates and framerates reduced by 1000/1001. E.g.:
+ 60 vs 59.94 Hz, 30 vs 29.97 Hz or 24 vs 23.976 Hz.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst b/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst
index 2011c2b2ee67..d9930fe776cf 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst
@@ -95,6 +95,25 @@ appropriate. In the first case the new value is set in struct
is inappropriate (e.g. the given menu index is not supported by the menu
control), then this will also result in an ``EINVAL`` error code error.
+If ``request_fd`` is set to a not-yet-queued :ref:`request <media-request-api>`
+file descriptor and ``which`` is set to ``V4L2_CTRL_WHICH_REQUEST_VAL``,
+then the controls are not applied immediately when calling
+:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`, but instead are applied by
+the driver for the buffer associated with the same request.
+If the device does not support requests, then ``EACCES`` will be returned.
+If requests are supported but an invalid request file descriptor is given,
+then ``EINVAL`` will be returned.
+
+An attempt to call :ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` for a
+request that has already been queued will result in an ``EBUSY`` error.
+
+If ``request_fd`` is specified and ``which`` is set to
+``V4L2_CTRL_WHICH_REQUEST_VAL`` during a call to
+:ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`, then it will return the
+values of the controls at the time of request completion.
+If the request is not yet completed, then this will result in an
+``EACCES`` error.
+
The driver will only set/get these controls if all control values are
correct. This prevents the situation where only some of the controls
were set/get. Only low-level errors (e. g. a failed i2c command) can
@@ -209,13 +228,17 @@ still cause this situation.
- ``which``
- Which value of the control to get/set/try.
``V4L2_CTRL_WHICH_CUR_VAL`` will return the current value of the
- control and ``V4L2_CTRL_WHICH_DEF_VAL`` will return the default
- value of the control.
+ control, ``V4L2_CTRL_WHICH_DEF_VAL`` will return the default
+ value of the control and ``V4L2_CTRL_WHICH_REQUEST_VAL`` indicates that
+ these controls have to be retrieved from a request or tried/set for
+ a request. In the latter case the ``request_fd`` field contains the
+ file descriptor of the request that should be used. If the device
+ does not support requests, then ``EACCES`` will be returned.
.. note::
- You can only get the default value of the control,
- you cannot set or try it.
+ When using ``V4L2_CTRL_WHICH_DEF_VAL`` be aware that you can only
+ get the default value of the control, you cannot set or try it.
For backwards compatibility you can also use a control class here
(see :ref:`ctrl-class`). In that case all controls have to
@@ -272,8 +295,15 @@ still cause this situation.
then you can call :ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` to try to discover the
actual control that failed the validation step. Unfortunately,
there is no ``TRY`` equivalent for :ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`.
+ * - __s32
+ - ``request_fd``
+ - File descriptor of the request to be used by this operation. Only
+ valid if ``which`` is set to ``V4L2_CTRL_WHICH_REQUEST_VAL``.
+ If the device does not support requests, then ``EACCES`` will be returned.
+ If requests are supported but an invalid request file descriptor is
+ given, then ``EINVAL`` will be returned.
* - __u32
- - ``reserved``\ [2]
+ - ``reserved``\ [1]
- Reserved for future extensions.
Drivers and applications must set the array to zero.
@@ -347,11 +377,14 @@ appropriately. The generic error codes are described at the
EINVAL
The struct :c:type:`v4l2_ext_control` ``id`` is
- invalid, the struct :c:type:`v4l2_ext_controls`
+ invalid, or the struct :c:type:`v4l2_ext_controls`
``which`` is invalid, or the struct
:c:type:`v4l2_ext_control` ``value`` was
inappropriate (e.g. the given menu index is not supported by the
- driver). This error code is also returned by the
+ driver), or the ``which`` field was set to ``V4L2_CTRL_WHICH_REQUEST_VAL``
+ but the given ``request_fd`` was invalid or ``V4L2_CTRL_WHICH_REQUEST_VAL``
+ is not supported by the kernel.
+ This error code is also returned by the
:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` and :ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` ioctls if two or
more control values are in conflict.
@@ -362,7 +395,9 @@ ERANGE
EBUSY
The control is temporarily not changeable, possibly because another
applications took over control of the device function this control
- belongs to.
+ belongs to, or (if the ``which`` field was set to
+ ``V4L2_CTRL_WHICH_REQUEST_VAL``) the request was queued but not yet
+ completed.
ENOSPC
The space reserved for the control's payload is insufficient. The
@@ -370,5 +405,9 @@ ENOSPC
and this error code is returned.
EACCES
- Attempt to try or set a read-only control or to get a write-only
- control.
+ Attempt to try or set a read-only control, or to get a write-only
+ control, or to get a control from a request that has not yet been
+ completed.
+
+ Or the ``which`` field was set to ``V4L2_CTRL_WHICH_REQUEST_VAL`` but the
+ device does not support requests.
diff --git a/Documentation/media/uapi/v4l/vidioc-qbuf.rst b/Documentation/media/uapi/v4l/vidioc-qbuf.rst
index 9e448a4aa3aa..753b3b5946b1 100644
--- a/Documentation/media/uapi/v4l/vidioc-qbuf.rst
+++ b/Documentation/media/uapi/v4l/vidioc-qbuf.rst
@@ -65,7 +65,7 @@ To enqueue a :ref:`memory mapped <mmap>` buffer applications set the
with a pointer to this structure the driver sets the
``V4L2_BUF_FLAG_MAPPED`` and ``V4L2_BUF_FLAG_QUEUED`` flags and clears
the ``V4L2_BUF_FLAG_DONE`` flag in the ``flags`` field, or it returns an
-EINVAL error code.
+``EINVAL`` error code.
To enqueue a :ref:`user pointer <userp>` buffer applications set the
``memory`` field to ``V4L2_MEMORY_USERPTR``, the ``m.userptr`` field to
@@ -98,6 +98,28 @@ dequeued, until the :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` or
:ref:`VIDIOC_REQBUFS` ioctl is called, or until the
device is closed.
+The ``request_fd`` field can be used with the ``VIDIOC_QBUF`` ioctl to specify
+the file descriptor of a :ref:`request <media-request-api>`, if requests are
+in use. Setting it means that the buffer will not be passed to the driver
+until the request itself is queued. Also, the driver will apply any
+settings associated with the request for this buffer. This field will
+be ignored unless the ``V4L2_BUF_FLAG_REQUEST_FD`` flag is set.
+If the device does not support requests, then ``EACCES`` will be returned.
+If requests are supported but an invalid request file descriptor is given,
+then ``EINVAL`` will be returned.
+
+.. caution::
+ It is not allowed to mix queuing requests with queuing buffers directly.
+ ``EBUSY`` will be returned if the first buffer was queued directly and
+ then the application tries to queue a request, or vice versa. After
+ closing the file descriptor, calling
+ :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` or calling :ref:`VIDIOC_REQBUFS`
+ the check for this will be reset.
+
+ For :ref:`memory-to-memory devices <codec>` you can specify the
+ ``request_fd`` only for output buffers, not for capture buffers. Attempting
+ to specify this for a capture buffer will result in an ``EACCES`` error.
+
Applications call the ``VIDIOC_DQBUF`` ioctl to dequeue a filled
(capturing) or displayed (output) buffer from the driver's outgoing
queue. They just set the ``type``, ``memory`` and ``reserved`` fields of
@@ -133,7 +155,9 @@ EAGAIN
EINVAL
The buffer ``type`` is not supported, or the ``index`` is out of
bounds, or no buffers have been allocated yet, or the ``userptr`` or
- ``length`` are invalid.
+ ``length`` are invalid, or the ``V4L2_BUF_FLAG_REQUEST_FD`` flag was
+ set but the the given ``request_fd`` was invalid, or ``m.fd`` was
+ an invalid DMABUF file descriptor.
EIO
``VIDIOC_DQBUF`` failed due to an internal error. Can also indicate
@@ -153,3 +177,12 @@ EPIPE
``VIDIOC_DQBUF`` returns this on an empty capture queue for mem2mem
codecs if a buffer with the ``V4L2_BUF_FLAG_LAST`` was already
dequeued and no new buffers are expected to become available.
+
+EACCES
+ The ``V4L2_BUF_FLAG_REQUEST_FD`` flag was set but the device does not
+ support requests for the given buffer type.
+
+EBUSY
+ The first buffer was queued via a request, but the application now tries
+ to queue it directly, or vice versa (it is not permitted to mix the two
+ APIs).
diff --git a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
index 5bd26e8c9a1a..258f5813f281 100644
--- a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
+++ b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
@@ -424,8 +424,18 @@ See also the examples in :ref:`control`.
- any
- An unsigned 32-bit valued control ranging from minimum to maximum
inclusive. The step value indicates the increment between values.
-
-
+ * - ``V4L2_CTRL_TYPE_MPEG2_SLICE_PARAMS``
+ - n/a
+ - n/a
+ - n/a
+ - A struct :c:type:`v4l2_ctrl_mpeg2_slice_params`, containing MPEG-2
+ slice parameters for stateless video decoders.
+ * - ``V4L2_CTRL_TYPE_MPEG2_QUANTIZATION``
+ - n/a
+ - n/a
+ - n/a
+ - A struct :c:type:`v4l2_ctrl_mpeg2_quantization`, containing MPEG-2
+ quantization matrices for stateless video decoders.
.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
diff --git a/Documentation/media/uapi/v4l/vidioc-reqbufs.rst b/Documentation/media/uapi/v4l/vidioc-reqbufs.rst
index 316f52c8a310..d4bbbb0c60e8 100644
--- a/Documentation/media/uapi/v4l/vidioc-reqbufs.rst
+++ b/Documentation/media/uapi/v4l/vidioc-reqbufs.rst
@@ -88,10 +88,50 @@ any DMA in progress, an implicit
``V4L2_MEMORY_DMABUF`` or ``V4L2_MEMORY_USERPTR``. See
:c:type:`v4l2_memory`.
* - __u32
- - ``reserved``\ [2]
+ - ``capabilities``
+ - Set by the driver. If 0, then the driver doesn't support
+ capabilities. In that case all you know is that the driver is
+ guaranteed to support ``V4L2_MEMORY_MMAP`` and *might* support
+ other :c:type:`v4l2_memory` types. It will not support any others
+ capabilities.
+
+ If you want to query the capabilities with a minimum of side-effects,
+ then this can be called with ``count`` set to 0, ``memory`` set to
+ ``V4L2_MEMORY_MMAP`` and ``type`` set to the buffer type. This will
+ free any previously allocated buffers, so this is typically something
+ that will be done at the start of the application.
+ * - __u32
+ - ``reserved``\ [1]
- A place holder for future extensions. Drivers and applications
must set the array to zero.
+.. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}|
+
+.. _v4l2-buf-capabilities:
+.. _V4L2-BUF-CAP-SUPPORTS-MMAP:
+.. _V4L2-BUF-CAP-SUPPORTS-USERPTR:
+.. _V4L2-BUF-CAP-SUPPORTS-DMABUF:
+.. _V4L2-BUF-CAP-SUPPORTS-REQUESTS:
+
+.. cssclass:: longtable
+
+.. flat-table:: V4L2 Buffer Capabilities Flags
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 3 1 4
+
+ * - ``V4L2_BUF_CAP_SUPPORTS_MMAP``
+ - 0x00000001
+ - This buffer type supports the ``V4L2_MEMORY_MMAP`` streaming mode.
+ * - ``V4L2_BUF_CAP_SUPPORTS_USERPTR``
+ - 0x00000002
+ - This buffer type supports the ``V4L2_MEMORY_USERPTR`` streaming mode.
+ * - ``V4L2_BUF_CAP_SUPPORTS_DMABUF``
+ - 0x00000004
+ - This buffer type supports the ``V4L2_MEMORY_DMABUF`` streaming mode.
+ * - ``V4L2_BUF_CAP_SUPPORTS_REQUESTS``
+ - 0x00000008
+ - This buffer type supports :ref:`requests <media-request-api>`.
Return Value
============
diff --git a/Documentation/media/videodev2.h.rst.exceptions b/Documentation/media/videodev2.h.rst.exceptions
index ca9f0edc579e..1ec425a7c364 100644
--- a/Documentation/media/videodev2.h.rst.exceptions
+++ b/Documentation/media/videodev2.h.rst.exceptions
@@ -56,7 +56,8 @@ replace symbol V4L2_MEMORY_USERPTR :c:type:`v4l2_memory`
# Documented enum v4l2_colorspace
replace symbol V4L2_COLORSPACE_470_SYSTEM_BG :c:type:`v4l2_colorspace`
replace symbol V4L2_COLORSPACE_470_SYSTEM_M :c:type:`v4l2_colorspace`
-replace symbol V4L2_COLORSPACE_ADOBERGB :c:type:`v4l2_colorspace`
+replace symbol V4L2_COLORSPACE_OPRGB :c:type:`v4l2_colorspace`
+replace define V4L2_COLORSPACE_ADOBERGB :c:type:`v4l2_colorspace`
replace symbol V4L2_COLORSPACE_BT2020 :c:type:`v4l2_colorspace`
replace symbol V4L2_COLORSPACE_DCI_P3 :c:type:`v4l2_colorspace`
replace symbol V4L2_COLORSPACE_DEFAULT :c:type:`v4l2_colorspace`
@@ -69,7 +70,8 @@ replace symbol V4L2_COLORSPACE_SRGB :c:type:`v4l2_colorspace`
# Documented enum v4l2_xfer_func
replace symbol V4L2_XFER_FUNC_709 :c:type:`v4l2_xfer_func`
-replace symbol V4L2_XFER_FUNC_ADOBERGB :c:type:`v4l2_xfer_func`
+replace symbol V4L2_XFER_FUNC_OPRGB :c:type:`v4l2_xfer_func`
+replace define V4L2_XFER_FUNC_ADOBERGB :c:type:`v4l2_xfer_func`
replace symbol V4L2_XFER_FUNC_DCI_P3 :c:type:`v4l2_xfer_func`
replace symbol V4L2_XFER_FUNC_DEFAULT :c:type:`v4l2_xfer_func`
replace symbol V4L2_XFER_FUNC_NONE :c:type:`v4l2_xfer_func`
@@ -129,6 +131,8 @@ replace symbol V4L2_CTRL_TYPE_STRING :c:type:`v4l2_ctrl_type`
replace symbol V4L2_CTRL_TYPE_U16 :c:type:`v4l2_ctrl_type`
replace symbol V4L2_CTRL_TYPE_U32 :c:type:`v4l2_ctrl_type`
replace symbol V4L2_CTRL_TYPE_U8 :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_MPEG2_SLICE_PARAMS :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_MPEG2_QUANTIZATION :c:type:`v4l2_ctrl_type`
# V4L2 capability defines
replace define V4L2_CAP_VIDEO_CAPTURE device-capabilities
@@ -278,6 +282,7 @@ replace define V4L2_DV_BT_STD_SDI dv-bt-standards
replace define V4L2_DV_FL_REDUCED_BLANKING dv-bt-standards
replace define V4L2_DV_FL_CAN_REDUCE_FPS dv-bt-standards
+replace define V4L2_DV_FL_CAN_DETECT_REDUCED_FPS dv-bt-standards
replace define V4L2_DV_FL_REDUCED_FPS dv-bt-standards
replace define V4L2_DV_FL_HALF_LINE dv-bt-standards
replace define V4L2_DV_FL_IS_CE_VIDEO dv-bt-standards
@@ -514,6 +519,7 @@ ignore define V4L2_CTRL_DRIVER_PRIV
ignore define V4L2_CTRL_MAX_DIMS
ignore define V4L2_CTRL_WHICH_CUR_VAL
ignore define V4L2_CTRL_WHICH_DEF_VAL
+ignore define V4L2_CTRL_WHICH_REQUEST_VAL
ignore define V4L2_OUT_CAP_CUSTOM_TIMINGS
ignore define V4L2_CID_MAX_CTRLS
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index 0d8d7ef131e9..c1d913944ad8 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -471,8 +471,7 @@ And a couple of implicit varieties:
operations after the ACQUIRE operation will appear to happen after the
ACQUIRE operation with respect to the other components of the system.
ACQUIRE operations include LOCK operations and both smp_load_acquire()
- and smp_cond_acquire() operations. The later builds the necessary ACQUIRE
- semantics from relying on a control dependency and smp_rmb().
+ and smp_cond_load_acquire() operations.
Memory operations that occur before an ACQUIRE operation may appear to
happen after it completes.
diff --git a/Documentation/mips/00-INDEX b/Documentation/mips/00-INDEX
deleted file mode 100644
index 8ae9cffc2262..000000000000
--- a/Documentation/mips/00-INDEX
+++ /dev/null
@@ -1,4 +0,0 @@
-00-INDEX
- - this file.
-AU1xxx_IDE.README
- - README for MIPS AU1XXX IDE driver.
diff --git a/Documentation/mmc/00-INDEX b/Documentation/mmc/00-INDEX
deleted file mode 100644
index 4623bc0aa0bb..000000000000
--- a/Documentation/mmc/00-INDEX
+++ /dev/null
@@ -1,10 +0,0 @@
-00-INDEX
- - this file
-mmc-dev-attrs.txt
- - info on SD and MMC device attributes
-mmc-dev-parts.txt
- - info on SD and MMC device partitions
-mmc-async-req.txt
- - info on mmc asynchronous requests
-mmc-tools.txt
- - info on mmc-utils tools
diff --git a/Documentation/mtd/nand/pxa3xx-nand.txt b/Documentation/mtd/nand/pxa3xx-nand.txt
deleted file mode 100644
index 1074cbc67ec6..000000000000
--- a/Documentation/mtd/nand/pxa3xx-nand.txt
+++ /dev/null
@@ -1,113 +0,0 @@
-
-About this document
-===================
-
-Some notes about Marvell's NAND controller available in PXA and Armada 370/XP
-SoC (aka NFCv1 and NFCv2), with an emphasis on the latter.
-
-NFCv2 controller background
-===========================
-
-The controller has a 2176 bytes FIFO buffer. Therefore, in order to support
-larger pages, I/O operations on 4 KiB and 8 KiB pages is done with a set of
-chunked transfers.
-
-For instance, if we choose a 2048 data chunk and set "BCH" ECC (see below)
-we'll have this layout in the pages:
-
- ------------------------------------------------------------------------------
- | 2048B data | 32B spare | 30B ECC || 2048B data | 32B spare | 30B ECC | ... |
- ------------------------------------------------------------------------------
-
-The driver reads the data and spare portions independently and builds an internal
-buffer with this layout (in the 4 KiB page case):
-
- ------------------------------------------
- | 4096B data | 64B spare |
- ------------------------------------------
-
-Also, for the READOOB command the driver disables the ECC and reads a 'spare + ECC'
-OOB, one per chunk read.
-
- -------------------------------------------------------------------
- | 4096B data | 32B spare | 30B ECC | 32B spare | 30B ECC |
- -------------------------------------------------------------------
-
-So, in order to achieve reading (for instance), we issue several READ0 commands
-(with some additional controller-specific magic) and read two chunks of 2080B
-(2048 data + 32 spare) each.
-The driver accommodates this data to expose the NAND core a contiguous buffer
-(4096 data + spare) or (4096 + spare + ECC + spare + ECC).
-
-ECC
-===
-
-The controller has built-in hardware ECC capabilities. In addition it is
-configurable between two modes: 1) Hamming, 2) BCH.
-
-Note that the actual BCH mode: BCH-4 or BCH-8 will depend on the way
-the controller is configured to transfer the data.
-
-In the BCH mode the ECC code will be calculated for each transferred chunk
-and expected to be located (when reading/programming) right after the spare
-bytes as the figure above shows.
-
-So, repeating the above scheme, a 2048B data chunk will be followed by 32B
-spare, and then the ECC controller will read/write the ECC code (30B in
-this case):
-
- ------------------------------------
- | 2048B data | 32B spare | 30B ECC |
- ------------------------------------
-
-If the ECC mode is 'BCH' then the ECC is *always* 30 bytes long.
-If the ECC mode is 'Hamming' the ECC is 6 bytes long, for each 512B block.
-So in Hamming mode, a 2048B page will have a 24B ECC.
-
-Despite all of the above, the controller requires the driver to only read or
-write in multiples of 8-bytes, because the data buffer is 64-bits.
-
-OOB
-===
-
-Because of the above scheme, and because the "spare" OOB is really located in
-the middle of a page, spare OOB cannot be read or write independently of the
-data area. In other words, in order to read the OOB (aka READOOB), the entire
-page (aka READ0) has to be read.
-
-In the same sense, in order to write to the spare OOB the driver has to write
-an *entire* page.
-
-Factory bad blocks handling
-===========================
-
-Given the ECC BCH requires to layout the device's pages in a split
-data/OOB/data/OOB way, the controller has a view of the flash page that's
-different from the specified (aka the manufacturer's) view. In other words,
-
-Factory view:
-
- -----------------------------------------------
- | Data |x OOB |
- -----------------------------------------------
-
-Driver's view:
-
- -----------------------------------------------
- | Data | OOB | Data x | OOB |
- -----------------------------------------------
-
-It can be seen from the above, that the factory bad block marker must be
-searched within the 'data' region, and not in the usual OOB region.
-
-In addition, this means under regular usage the driver will write such
-position (since it belongs to the data region) and every used block is
-likely to be marked as bad.
-
-For this reason, marking the block as bad in the OOB is explicitly
-disabled by using the NAND_BBT_NO_OOB_BBM option in the driver. The rationale
-for this is that there's no point in marking a block as bad, because good
-blocks are also 'marked as bad' (in the OOB BBM sense) under normal usage.
-
-Instead, the driver relies on the bad block table alone, and should only perform
-the bad block scan on the very first time (when the device hasn't been used).
diff --git a/Documentation/netlabel/00-INDEX b/Documentation/netlabel/00-INDEX
deleted file mode 100644
index 837bf35990e2..000000000000
--- a/Documentation/netlabel/00-INDEX
+++ /dev/null
@@ -1,10 +0,0 @@
-00-INDEX
- - this file.
-cipso_ipv4.txt
- - documentation on the IPv4 CIPSO protocol engine.
-draft-ietf-cipso-ipsecurity-01.txt
- - IETF draft of the CIPSO protocol, dated 16 July 1992.
-introduction.txt
- - NetLabel introduction, READ THIS FIRST.
-lsm_interface.txt
- - documentation on the NetLabel kernel security module API.
diff --git a/Documentation/netlabel/cipso_ipv4.txt b/Documentation/netlabel/cipso_ipv4.txt
index 93dacb132c3c..a6075481fd60 100644
--- a/Documentation/netlabel/cipso_ipv4.txt
+++ b/Documentation/netlabel/cipso_ipv4.txt
@@ -6,11 +6,12 @@ May 17, 2006
* Overview
-The NetLabel CIPSO/IPv4 protocol engine is based on the IETF Commercial IP
-Security Option (CIPSO) draft from July 16, 1992. A copy of this draft can be
-found in this directory, consult '00-INDEX' for the filename. While the IETF
-draft never made it to an RFC standard it has become a de-facto standard for
-labeled networking and is used in many trusted operating systems.
+The NetLabel CIPSO/IPv4 protocol engine is based on the IETF Commercial
+IP Security Option (CIPSO) draft from July 16, 1992. A copy of this
+draft can be found in this directory
+(draft-ietf-cipso-ipsecurity-01.txt). While the IETF draft never made
+it to an RFC standard it has become a de-facto standard for labeled
+networking and is used in many trusted operating systems.
* Outbound Packet Processing
diff --git a/Documentation/netlabel/introduction.txt b/Documentation/netlabel/introduction.txt
index 5ecd8d1dcf4e..3caf77bcff0f 100644
--- a/Documentation/netlabel/introduction.txt
+++ b/Documentation/netlabel/introduction.txt
@@ -22,7 +22,7 @@ refrain from calling the protocol engines directly, instead they should use
the NetLabel kernel security module API described below.
Detailed information about each NetLabel protocol engine can be found in this
-directory, consult '00-INDEX' for filenames.
+directory.
* Communication Layer
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
deleted file mode 100644
index 02a323c43261..000000000000
--- a/Documentation/networking/00-INDEX
+++ /dev/null
@@ -1,234 +0,0 @@
-00-INDEX
- - this file
-3c509.txt
- - information on the 3Com Etherlink III Series Ethernet cards.
-6pack.txt
- - info on the 6pack protocol, an alternative to KISS for AX.25
-LICENSE.qla3xxx
- - GPLv2 for QLogic Linux Networking HBA Driver
-LICENSE.qlge
- - GPLv2 for QLogic Linux qlge NIC Driver
-LICENSE.qlcnic
- - GPLv2 for QLogic Linux qlcnic NIC Driver
-PLIP.txt
- - PLIP: The Parallel Line Internet Protocol device driver
-README.ipw2100
- - README for the Intel PRO/Wireless 2100 driver.
-README.ipw2200
- - README for the Intel PRO/Wireless 2915ABG and 2200BG driver.
-README.sb1000
- - info on General Instrument/NextLevel SURFboard1000 cable modem.
-altera_tse.txt
- - Altera Triple-Speed Ethernet controller.
-arcnet-hardware.txt
- - tons of info on ARCnet, hubs, jumper settings for ARCnet cards, etc.
-arcnet.txt
- - info on the using the ARCnet driver itself.
-atm.txt
- - info on where to get ATM programs and support for Linux.
-ax25.txt
- - info on using AX.25 and NET/ROM code for Linux
-baycom.txt
- - info on the driver for Baycom style amateur radio modems
-bonding.txt
- - Linux Ethernet Bonding Driver HOWTO: link aggregation in Linux.
-bridge.txt
- - where to get user space programs for ethernet bridging with Linux.
-cdc_mbim.txt
- - 3G/LTE USB modem (Mobile Broadband Interface Model)
-checksum-offloads.txt
- - Explanation of checksum offloads; LCO, RCO
-cops.txt
- - info on the COPS LocalTalk Linux driver
-cs89x0.txt
- - the Crystal LAN (CS8900/20-based) Ethernet ISA adapter driver
-cxacru.txt
- - Conexant AccessRunner USB ADSL Modem
-cxacru-cf.py
- - Conexant AccessRunner USB ADSL Modem configuration file parser
-cxgb.txt
- - Release Notes for the Chelsio N210 Linux device driver.
-dccp.txt
- - the Datagram Congestion Control Protocol (DCCP) (RFC 4340..42).
-dctcp.txt
- - DataCenter TCP congestion control
-de4x5.txt
- - the Digital EtherWORKS DE4?? and DE5?? PCI Ethernet driver
-decnet.txt
- - info on using the DECnet networking layer in Linux.
-dl2k.txt
- - README for D-Link DL2000-based Gigabit Ethernet Adapters (dl2k.ko).
-dm9000.txt
- - README for the Simtec DM9000 Network driver.
-dmfe.txt
- - info on the Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver.
-dns_resolver.txt
- - The DNS resolver module allows kernel servies to make DNS queries.
-driver.txt
- - Softnet driver issues.
-ena.txt
- - info on Amazon's Elastic Network Adapter (ENA)
-e100.txt
- - info on Intel's EtherExpress PRO/100 line of 10/100 boards
-e1000.txt
- - info on Intel's E1000 line of gigabit ethernet boards
-e1000e.txt
- - README for the Intel Gigabit Ethernet Driver (e1000e).
-eql.txt
- - serial IP load balancing
-fib_trie.txt
- - Level Compressed Trie (LC-trie) notes: a structure for routing.
-filter.txt
- - Linux Socket Filtering
-fore200e.txt
- - FORE Systems PCA-200E/SBA-200E ATM NIC driver info.
-framerelay.txt
- - info on using Frame Relay/Data Link Connection Identifier (DLCI).
-gen_stats.txt
- - Generic networking statistics for netlink users.
-generic-hdlc.txt
- - The generic High Level Data Link Control (HDLC) layer.
-generic_netlink.txt
- - info on Generic Netlink
-gianfar.txt
- - Gianfar Ethernet Driver.
-i40e.txt
- - README for the Intel Ethernet Controller XL710 Driver (i40e).
-i40evf.txt
- - Short note on the Driver for the Intel(R) XL710 X710 Virtual Function
-ieee802154.txt
- - Linux IEEE 802.15.4 implementation, API and drivers
-igb.txt
- - README for the Intel Gigabit Ethernet Driver (igb).
-igbvf.txt
- - README for the Intel Gigabit Ethernet Driver (igbvf).
-ip-sysctl.txt
- - /proc/sys/net/ipv4/* variables
-ip_dynaddr.txt
- - IP dynamic address hack e.g. for auto-dialup links
-ipddp.txt
- - AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation
-iphase.txt
- - Interphase PCI ATM (i)Chip IA Linux driver info.
-ipsec.txt
- - Note on not compressing IPSec payload and resulting failed policy check.
-ipv6.txt
- - Options to the ipv6 kernel module.
-ipvs-sysctl.txt
- - Per-inode explanation of the /proc/sys/net/ipv4/vs interface.
-irda.txt
- - where to get IrDA (infrared) utilities and info for Linux.
-ixgb.txt
- - README for the Intel 10 Gigabit Ethernet Driver (ixgb).
-ixgbe.txt
- - README for the Intel 10 Gigabit Ethernet Driver (ixgbe).
-ixgbevf.txt
- - README for the Intel Virtual Function (VF) Driver (ixgbevf).
-l2tp.txt
- - User guide to the L2TP tunnel protocol.
-lapb-module.txt
- - programming information of the LAPB module.
-ltpc.txt
- - the Apple or Farallon LocalTalk PC card driver
-mac80211-auth-assoc-deauth.txt
- - authentication and association / deauth-disassoc with max80211
-mac80211-injection.txt
- - HOWTO use packet injection with mac80211
-multiqueue.txt
- - HOWTO for multiqueue network device support.
-netconsole.txt
- - The network console module netconsole.ko: configuration and notes.
-netdev-features.txt
- - Network interface features API description.
-netdevices.txt
- - info on network device driver functions exported to the kernel.
-netif-msg.txt
- - Design of the network interface message level setting (NETIF_MSG_*).
-netlink_mmap.txt
- - memory mapped I/O with netlink
-nf_conntrack-sysctl.txt
- - list of netfilter-sysctl knobs.
-nfc.txt
- - The Linux Near Field Communication (NFS) subsystem.
-openvswitch.txt
- - Open vSwitch developer documentation.
-operstates.txt
- - Overview of network interface operational states.
-packet_mmap.txt
- - User guide to memory mapped packet socket rings (PACKET_[RT]X_RING).
-phonet.txt
- - The Phonet packet protocol used in Nokia cellular modems.
-phy.txt
- - The PHY abstraction layer.
-pktgen.txt
- - User guide to the kernel packet generator (pktgen.ko).
-policy-routing.txt
- - IP policy-based routing
-ppp_generic.txt
- - Information about the generic PPP driver.
-proc_net_tcp.txt
- - Per inode overview of the /proc/net/tcp and /proc/net/tcp6 interfaces.
-radiotap-headers.txt
- - Background on radiotap headers.
-ray_cs.txt
- - Raylink Wireless LAN card driver info.
-rds.txt
- - Background on the reliable, ordered datagram delivery method RDS.
-regulatory.txt
- - Overview of the Linux wireless regulatory infrastructure.
-rxrpc.txt
- - Guide to the RxRPC protocol.
-s2io.txt
- - Release notes for Neterion Xframe I/II 10GbE driver.
-scaling.txt
- - Explanation of network scaling techniques: RSS, RPS, RFS, aRFS, XPS.
-sctp.txt
- - Notes on the Linux kernel implementation of the SCTP protocol.
-secid.txt
- - Explanation of the secid member in flow structures.
-skfp.txt
- - SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
-smc9.txt
- - the driver for SMC's 9000 series of Ethernet cards
-spider_net.txt
- - README for the Spidernet Driver (as found in PS3 / Cell BE).
-stmmac.txt
- - README for the STMicro Synopsys Ethernet driver.
-tc-actions-env-rules.txt
- - rules for traffic control (tc) actions.
-timestamping.txt
- - overview of network packet timestamping variants.
-tcp.txt
- - short blurb on how TCP output takes place.
-tcp-thin.txt
- - kernel tuning options for low rate 'thin' TCP streams.
-team.txt
- - pointer to information for ethernet teaming devices.
-tlan.txt
- - ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info.
-tproxy.txt
- - Transparent proxy support user guide.
-tuntap.txt
- - TUN/TAP device driver, allowing user space Rx/Tx of packets.
-udplite.txt
- - UDP-Lite protocol (RFC 3828) introduction.
-vortex.txt
- - info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
-vxge.txt
- - README for the Neterion X3100 PCIe Server Adapter.
-vxlan.txt
- - Virtual extensible LAN overview
-x25.txt
- - general info on X.25 development.
-x25-iface.txt
- - description of the X.25 Packet Layer to LAPB device interface.
-xfrm_device.txt
- - description of XFRM offload API
-xfrm_proc.txt
- - description of the statistics package for XFRM.
-xfrm_sync.txt
- - sync patches for XFRM enable migration of an SA between hosts.
-xfrm_sysctl.txt
- - description of the XFRM configuration options.
-z8530drv.txt
- - info about Linux driver for Z8530 based HDLC cards for AX.25
diff --git a/Documentation/networking/af_xdp.rst b/Documentation/networking/af_xdp.rst
index ff929cfab4f4..4ae4f9d8f8fe 100644
--- a/Documentation/networking/af_xdp.rst
+++ b/Documentation/networking/af_xdp.rst
@@ -159,8 +159,8 @@ log2(2048) LSB of the addr will be masked off, meaning that 2048, 2050
and 3000 refers to the same chunk.
-UMEM Completetion Ring
-~~~~~~~~~~~~~~~~~~~~~~
+UMEM Completion Ring
+~~~~~~~~~~~~~~~~~~~~
The Completion Ring is used transfer ownership of UMEM frames from
kernel-space to user-space. Just like the Fill ring, UMEM indicies are
diff --git a/Documentation/networking/defza.txt b/Documentation/networking/defza.txt
new file mode 100644
index 000000000000..663e4a906751
--- /dev/null
+++ b/Documentation/networking/defza.txt
@@ -0,0 +1,57 @@
+Notes on the DEC FDDIcontroller 700 (DEFZA-xx) driver v.1.1.4.
+
+
+DEC FDDIcontroller 700 is DEC's first-generation TURBOchannel FDDI
+network card, designed in 1990 specifically for the DECstation 5000
+model 200 workstation. The board is a single attachment station and
+it was manufactured in two variations, both of which are supported.
+
+First is the SAS MMF DEFZA-AA option, the original design implementing
+the standard MMF-PMD, however with a pair of ST connectors rather than
+the usual MIC connector. The other one is the SAS ThinWire/STP DEFZA-CA
+option, denoted 700-C, with the network medium selectable by a switch
+between the DEC proprietary ThinWire-PMD using a BNC connector and the
+standard STP-PMD using a DE-9F connector. This option can interface to
+a DECconcentrator 500 device and, in the case of the STP-PMD, also other
+FDDI equipment and was designed to make it easier to transition from
+existing IEEE 802.3 10BASE2 Ethernet and IEEE 802.5 Token Ring networks
+by providing means to reuse existing cabling.
+
+This driver handles any number of cards installed in a single system.
+They get fddi0, fddi1, etc. interface names assigned in the order of
+increasing TURBOchannel slot numbers.
+
+The board only supports DMA on the receive side. Transmission involves
+the use of PIO. As a result under a heavy transmission load there will
+be a significant impact on system performance.
+
+The board supports a 64-entry CAM for matching destination addresses.
+Two entries are preoccupied by the Directed Beacon and Ring Purger
+multicast addresses and the rest is used as a multicast filter. An
+all-multi mode is also supported for LLC frames and it is used if
+requested explicitly or if the CAM overflows. The promiscuous mode
+supports separate enables for LLC and SMT frames, but this driver
+doesn't support changing them individually.
+
+
+Known problems:
+
+None.
+
+
+To do:
+
+5. MAC address change. The card does not support changing the Media
+ Access Controller's address registers but a similar effect can be
+ achieved by adding an alias to the CAM. There is no way to disable
+ matching against the original address though.
+
+7. Queueing incoming/outgoing SMT frames in the driver if the SMT
+ receive/RMC transmit ring is full. (?)
+
+8. Retrieving/reporting FDDI/SNMP stats.
+
+
+Both success and failure reports are welcome.
+
+Maciej W. Rozycki <macro@linux-mips.org>
diff --git a/Documentation/networking/devlink-params-bnxt.txt b/Documentation/networking/devlink-params-bnxt.txt
new file mode 100644
index 000000000000..481aa303d5b4
--- /dev/null
+++ b/Documentation/networking/devlink-params-bnxt.txt
@@ -0,0 +1,18 @@
+enable_sriov [DEVICE, GENERIC]
+ Configuration mode: Permanent
+
+ignore_ari [DEVICE, GENERIC]
+ Configuration mode: Permanent
+
+msix_vec_per_pf_max [DEVICE, GENERIC]
+ Configuration mode: Permanent
+
+msix_vec_per_pf_min [DEVICE, GENERIC]
+ Configuration mode: Permanent
+
+gre_ver_check [DEVICE, DRIVER-SPECIFIC]
+ Generic Routing Encapsulation (GRE) version check will
+ be enabled in the device. If disabled, device skips
+ version checking for incoming packets.
+ Type: Boolean
+ Configuration mode: Permanent
diff --git a/Documentation/networking/devlink-params.txt b/Documentation/networking/devlink-params.txt
new file mode 100644
index 000000000000..ae444ffe73ac
--- /dev/null
+++ b/Documentation/networking/devlink-params.txt
@@ -0,0 +1,42 @@
+Devlink configuration parameters
+================================
+Following is the list of configuration parameters via devlink interface.
+Each parameter can be generic or driver specific and are device level
+parameters.
+
+Note that the driver-specific files should contain the generic params
+they support to, with supported config modes.
+
+Each parameter can be set in different configuration modes:
+ runtime - set while driver is running, no reset required.
+ driverinit - applied while driver initializes, requires restart
+ driver by devlink reload command.
+ permanent - written to device's non-volatile memory, hard reset
+ required.
+
+Following is the list of parameters:
+====================================
+enable_sriov [DEVICE, GENERIC]
+ Enable Single Root I/O Virtualisation (SRIOV) in
+ the device.
+ Type: Boolean
+
+ignore_ari [DEVICE, GENERIC]
+ Ignore Alternative Routing-ID Interpretation (ARI)
+ capability. If enabled, adapter will ignore ARI
+ capability even when platforms has the support
+ enabled and creates same number of partitions when
+ platform does not support ARI.
+ Type: Boolean
+
+msix_vec_per_pf_max [DEVICE, GENERIC]
+ Provides the maximum number of MSIX interrupts that
+ a device can create. Value is same across all
+ physical functions (PFs) in the device.
+ Type: u32
+
+msix_vec_per_pf_min [DEVICE, GENERIC]
+ Provides the minimum number of MSIX interrupts required
+ for the device initialization. Value is same across all
+ physical functions (PFs) in the device.
+ Type: u32
diff --git a/Documentation/networking/dpaa2/ethernet-driver.rst b/Documentation/networking/dpaa2/ethernet-driver.rst
new file mode 100644
index 000000000000..90ec940749e8
--- /dev/null
+++ b/Documentation/networking/dpaa2/ethernet-driver.rst
@@ -0,0 +1,185 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+===============================
+DPAA2 Ethernet driver
+===============================
+
+:Copyright: |copy| 2017-2018 NXP
+
+This file provides documentation for the Freescale DPAA2 Ethernet driver.
+
+Supported Platforms
+===================
+This driver provides networking support for Freescale DPAA2 SoCs, e.g.
+LS2080A, LS2088A, LS1088A.
+
+
+Architecture Overview
+=====================
+Unlike regular NICs, in the DPAA2 architecture there is no single hardware block
+representing network interfaces; instead, several separate hardware resources
+concur to provide the networking functionality:
+
+- network interfaces
+- queues, channels
+- buffer pools
+- MAC/PHY
+
+All hardware resources are allocated and configured through the Management
+Complex (MC) portals. MC abstracts most of these resources as DPAA2 objects
+and exposes ABIs through which they can be configured and controlled. A few
+hardware resources, like queues, do not have a corresponding MC object and
+are treated as internal resources of other objects.
+
+For a more detailed description of the DPAA2 architecture and its object
+abstractions see *Documentation/networking/dpaa2/overview.rst*.
+
+Each Linux net device is built on top of a Datapath Network Interface (DPNI)
+object and uses Buffer Pools (DPBPs), I/O Portals (DPIOs) and Concentrators
+(DPCONs).
+
+Configuration interface::
+
+ -----------------------
+ | DPAA2 Ethernet Driver |
+ -----------------------
+ . . .
+ . . .
+ . . . . . . . . . . . .
+ . . .
+ . . .
+ ---------- ---------- -----------
+ | DPBP API | | DPNI API | | DPCON API |
+ ---------- ---------- -----------
+ . . . software
+ ======= . ========== . ============ . ===================
+ . . . hardware
+ ------------------------------------------
+ | MC hardware portals |
+ ------------------------------------------
+ . . .
+ . . .
+ ------ ------ -------
+ | DPBP | | DPNI | | DPCON |
+ ------ ------ -------
+
+The DPNIs are network interfaces without a direct one-on-one mapping to PHYs.
+DPBPs represent hardware buffer pools. Packet I/O is performed in the context
+of DPCON objects, using DPIO portals for managing and communicating with the
+hardware resources.
+
+Datapath (I/O) interface::
+
+ -----------------------------------------------
+ | DPAA2 Ethernet Driver |
+ -----------------------------------------------
+ | ^ ^ | |
+ | | | | |
+ enqueue| dequeue| data | dequeue| seed |
+ (Tx) | (Rx, TxC)| avail.| request| buffers|
+ | | notify| | |
+ | | | | |
+ V | | V V
+ -----------------------------------------------
+ | DPIO Driver |
+ -----------------------------------------------
+ | | | | | software
+ | | | | | ================
+ | | | | | hardware
+ -----------------------------------------------
+ | I/O hardware portals |
+ -----------------------------------------------
+ | ^ ^ | |
+ | | | | |
+ | | | V |
+ V | ================ V
+ ---------------------- | -------------
+ queues ---------------------- | | Buffer pool |
+ ---------------------- | -------------
+ =======================
+ Channel
+
+Datapath I/O (DPIO) portals provide enqueue and dequeue services, data
+availability notifications and buffer pool management. DPIOs are shared between
+all DPAA2 objects (and implicitly all DPAA2 kernel drivers) that work with data
+frames, but must be affine to the CPUs for the purpose of traffic distribution.
+
+Frames are transmitted and received through hardware frame queues, which can be
+grouped in channels for the purpose of hardware scheduling. The Ethernet driver
+enqueues TX frames on egress queues and after transmission is complete a TX
+confirmation frame is sent back to the CPU.
+
+When frames are available on ingress queues, a data availability notification
+is sent to the CPU; notifications are raised per channel, so even if multiple
+queues in the same channel have available frames, only one notification is sent.
+After a channel fires a notification, is must be explicitly rearmed.
+
+Each network interface can have multiple Rx, Tx and confirmation queues affined
+to CPUs, and one channel (DPCON) for each CPU that services at least one queue.
+DPCONs are used to distribute ingress traffic to different CPUs via the cores'
+affine DPIOs.
+
+The role of hardware buffer pools is storage of ingress frame data. Each network
+interface has a privately owned buffer pool which it seeds with kernel allocated
+buffers.
+
+
+DPNIs are decoupled from PHYs; a DPNI can be connected to a PHY through a DPMAC
+object or to another DPNI through an internal link, but the connection is
+managed by MC and completely transparent to the Ethernet driver.
+
+::
+
+ --------- --------- ---------
+ | eth if1 | | eth if2 | | eth ifn |
+ --------- --------- ---------
+ . . .
+ . . .
+ . . .
+ ---------------------------
+ | DPAA2 Ethernet Driver |
+ ---------------------------
+ . . .
+ . . .
+ . . .
+ ------ ------ ------ -------
+ | DPNI | | DPNI | | DPNI | | DPMAC |----+
+ ------ ------ ------ ------- |
+ | | | | |
+ | | | | -----
+ =========== ================== | PHY |
+ -----
+
+Creating a Network Interface
+============================
+A net device is created for each DPNI object probed on the MC bus. Each DPNI has
+a number of properties which determine the network interface configuration
+options and associated hardware resources.
+
+DPNI objects (and the other DPAA2 objects needed for a network interface) can be
+added to a container on the MC bus in one of two ways: statically, through a
+Datapath Layout Binary file (DPL) that is parsed by MC at boot time; or created
+dynamically at runtime, via the DPAA2 objects APIs.
+
+
+Features & Offloads
+===================
+Hardware checksum offloading is supported for TCP and UDP over IPv4/6 frames.
+The checksum offloads can be independently configured on RX and TX through
+ethtool.
+
+Hardware offload of unicast and multicast MAC filtering is supported on the
+ingress path and permanently enabled.
+
+Scatter-gather frames are supported on both RX and TX paths. On TX, SG support
+is configurable via ethtool; on RX it is always enabled.
+
+The DPAA2 hardware can process jumbo Ethernet frames of up to 10K bytes.
+
+The Ethernet driver defines a static flow hashing scheme that distributes
+traffic based on a 5-tuple key: src IP, dst IP, IP proto, L4 src port,
+L4 dst port. No user configuration is supported for now.
+
+Hardware specific statistics for the network interface as well as some
+non-standard driver stats can be consulted through ethtool -S option.
diff --git a/Documentation/networking/dpaa2/index.rst b/Documentation/networking/dpaa2/index.rst
index 10bea113a7bc..67bd87fe6c53 100644
--- a/Documentation/networking/dpaa2/index.rst
+++ b/Documentation/networking/dpaa2/index.rst
@@ -7,3 +7,4 @@ DPAA2 Documentation
overview
dpio-driver
+ ethernet-driver
diff --git a/Documentation/networking/e100.rst b/Documentation/networking/e100.rst
index f81111eba9c5..5e2839b4ec92 100644
--- a/Documentation/networking/e100.rst
+++ b/Documentation/networking/e100.rst
@@ -1,4 +1,5 @@
-==============================================================
+.. SPDX-License-Identifier: GPL-2.0+
+
Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters
==============================================================
diff --git a/Documentation/networking/e1000.rst b/Documentation/networking/e1000.rst
index f10dd4086921..6379d4d20771 100644
--- a/Documentation/networking/e1000.rst
+++ b/Documentation/networking/e1000.rst
@@ -1,4 +1,5 @@
-===========================================================
+.. SPDX-License-Identifier: GPL-2.0+
+
Linux* Base Driver for Intel(R) Ethernet Network Connection
===========================================================
diff --git a/Documentation/networking/e1000e.rst b/Documentation/networking/e1000e.rst
new file mode 100644
index 000000000000..33554e5416c5
--- /dev/null
+++ b/Documentation/networking/e1000e.rst
@@ -0,0 +1,382 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Linux* Driver for Intel(R) Ethernet Network Connection
+======================================================
+
+Intel Gigabit Linux driver.
+Copyright(c) 2008-2018 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Command Line Parameters
+- Additional Configurations
+- Support
+
+
+Identifying Your Adapter
+========================
+For information on how to identify your adapter, and for the latest Intel
+network drivers, refer to the Intel Support website:
+https://www.intel.com/support
+
+
+Command Line Parameters
+=======================
+If the driver is built as a module, the following optional parameters are used
+by entering them on the command line with the modprobe command using this
+syntax::
+
+ modprobe e1000e [<option>=<VAL1>,<VAL2>,...]
+
+There needs to be a <VAL#> for each network port in the system supported by
+this driver. The values will be applied to each instance, in function order.
+For example::
+
+ modprobe e1000e InterruptThrottleRate=16000,16000
+
+In this case, there are two network ports supported by e1000e in the system.
+The default value for each parameter is generally the recommended setting,
+unless otherwise noted.
+
+NOTE: A descriptor describes a data buffer and attributes related to the data
+buffer. This information is accessed by the hardware.
+
+InterruptThrottleRate
+---------------------
+:Valid Range: 0,1,3,4,100-100000
+:Default Value: 3
+
+Interrupt Throttle Rate controls the number of interrupts each interrupt
+vector can generate per second. Increasing ITR lowers latency at the cost of
+increased CPU utilization, though it may help throughput in some circumstances.
+
+Setting InterruptThrottleRate to a value greater or equal to 100
+will program the adapter to send out a maximum of that many interrupts
+per second, even if more packets have come in. This reduces interrupt
+load on the system and can lower CPU utilization under heavy load,
+but will increase latency as packets are not processed as quickly.
+
+The default behaviour of the driver previously assumed a static
+InterruptThrottleRate value of 8000, providing a good fallback value for
+all traffic types, but lacking in small packet performance and latency.
+The hardware can handle many more small packets per second however, and
+for this reason an adaptive interrupt moderation algorithm was implemented.
+
+The driver has two adaptive modes (setting 1 or 3) in which
+it dynamically adjusts the InterruptThrottleRate value based on the traffic
+that it receives. After determining the type of incoming traffic in the last
+timeframe, it will adjust the InterruptThrottleRate to an appropriate value
+for that traffic.
+
+The algorithm classifies the incoming traffic every interval into
+classes. Once the class is determined, the InterruptThrottleRate value is
+adjusted to suit that traffic type the best. There are three classes defined:
+"Bulk traffic", for large amounts of packets of normal size; "Low latency",
+for small amounts of traffic and/or a significant percentage of small
+packets; and "Lowest latency", for almost completely small packets or
+minimal traffic.
+
+ - 0: Off
+ Turns off any interrupt moderation and may improve small packet latency.
+ However, this is generally not suitable for bulk throughput traffic due
+ to the increased CPU utilization of the higher interrupt rate.
+ - 1: Dynamic mode
+ This mode attempts to moderate interrupts per vector while maintaining
+ very low latency. This can sometimes cause extra CPU utilization. If
+ planning on deploying e1000e in a latency sensitive environment, this
+ parameter should be considered.
+ - 3: Dynamic Conservative mode (default)
+ In dynamic conservative mode, the InterruptThrottleRate value is set to
+ 4000 for traffic that falls in class "Bulk traffic". If traffic falls in
+ the "Low latency" or "Lowest latency" class, the InterruptThrottleRate is
+ increased stepwise to 20000. This default mode is suitable for most
+ applications.
+ - 4: Simplified Balancing mode
+ In simplified mode the interrupt rate is based on the ratio of TX and
+ RX traffic. If the bytes per second rate is approximately equal, the
+ interrupt rate will drop as low as 2000 interrupts per second. If the
+ traffic is mostly transmit or mostly receive, the interrupt rate could
+ be as high as 8000.
+ - 100-100000:
+ Setting InterruptThrottleRate to a value greater or equal to 100
+ will program the adapter to send at most that many interrupts per second,
+ even if more packets have come in. This reduces interrupt load on the
+ system and can lower CPU utilization under heavy load, but will increase
+ latency as packets are not processed as quickly.
+
+NOTE: InterruptThrottleRate takes precedence over the TxAbsIntDelay and
+RxAbsIntDelay parameters. In other words, minimizing the receive and/or
+transmit absolute delays does not force the controller to generate more
+interrupts than what the Interrupt Throttle Rate allows.
+
+RxIntDelay
+----------
+:Valid Range: 0-65535 (0=off)
+:Default Value: 0
+
+This value delays the generation of receive interrupts in units of 1.024
+microseconds. Receive interrupt reduction can improve CPU efficiency if
+properly tuned for specific network traffic. Increasing this value adds extra
+latency to frame reception and can end up decreasing the throughput of TCP
+traffic. If the system is reporting dropped receives, this value may be set
+too high, causing the driver to run out of available receive descriptors.
+
+CAUTION: When setting RxIntDelay to a value other than 0, adapters may hang
+(stop transmitting) under certain network conditions. If this occurs a NETDEV
+WATCHDOG message is logged in the system event log. In addition, the
+controller is automatically reset, restoring the network connection. To
+eliminate the potential for the hang ensure that RxIntDelay is set to 0.
+
+RxAbsIntDelay
+-------------
+:Valid Range: 0-65535 (0=off)
+:Default Value: 8
+
+This value, in units of 1.024 microseconds, limits the delay in which a
+receive interrupt is generated. This value ensures that an interrupt is
+generated after the initial packet is received within the set amount of time,
+which is useful only if RxIntDelay is non-zero. Proper tuning, along with
+RxIntDelay, may improve traffic throughput in specific network conditions.
+
+TxIntDelay
+----------
+:Valid Range: 0-65535 (0=off)
+:Default Value: 8
+
+This value delays the generation of transmit interrupts in units of 1.024
+microseconds. Transmit interrupt reduction can improve CPU efficiency if
+properly tuned for specific network traffic. If the system is reporting
+dropped transmits, this value may be set too high causing the driver to run
+out of available transmit descriptors.
+
+TxAbsIntDelay
+-------------
+:Valid Range: 0-65535 (0=off)
+:Default Value: 32
+
+This value, in units of 1.024 microseconds, limits the delay in which a
+transmit interrupt is generated. It is useful only if TxIntDelay is non-zero.
+It ensures that an interrupt is generated after the initial Packet is sent on
+the wire within the set amount of time. Proper tuning, along with TxIntDelay,
+may improve traffic throughput in specific network conditions.
+
+copybreak
+---------
+:Valid Range: 0-xxxxxxx (0=off)
+:Default Value: 256
+
+The driver copies all packets below or equaling this size to a fresh receive
+buffer before handing it up the stack.
+This parameter differs from other parameters because it is a single (not 1,1,1
+etc.) parameter applied to all driver instances and it is also available
+during runtime at /sys/module/e1000e/parameters/copybreak.
+
+To use copybreak, type::
+
+ modprobe e1000e.ko copybreak=128
+
+SmartPowerDownEnable
+--------------------
+:Valid Range: 0,1
+:Default Value: 0 (disabled)
+
+Allows the PHY to turn off in lower power states. The user can turn off this
+parameter in supported chipsets.
+
+KumeranLockLoss
+---------------
+:Valid Range: 0,1
+:Default Value: 1 (enabled)
+
+This workaround skips resetting the PHY at shutdown for the initial silicon
+releases of ICH8 systems.
+
+IntMode
+-------
+:Valid Range: 0-2
+:Default Value: 0
+
+ +-------+----------------+
+ | Value | Interrupt Mode |
+ +=======+================+
+ | 0 | Legacy |
+ +-------+----------------+
+ | 1 | MSI |
+ +-------+----------------+
+ | 2 | MSI-X |
+ +-------+----------------+
+
+IntMode allows load time control over the type of interrupt registered for by
+the driver. MSI-X is required for multiple queue support, and some kernels and
+combinations of kernel .config options will force a lower level of interrupt
+support.
+
+This command will show different values for each type of interrupt::
+
+ cat /proc/interrupts
+
+CrcStripping
+------------
+:Valid Range: 0,1
+:Default Value: 1 (enabled)
+
+Strip the CRC from received packets before sending up the network stack. If
+you have a machine with a BMC enabled but cannot receive IPMI traffic after
+loading or enabling the driver, try disabling this feature.
+
+WriteProtectNVM
+---------------
+:Valid Range: 0,1
+:Default Value: 1 (enabled)
+
+If set to 1, configure the hardware to ignore all write/erase cycles to the
+GbE region in the ICHx NVM (in order to prevent accidental corruption of the
+NVM). This feature can be disabled by setting the parameter to 0 during initial
+driver load.
+
+NOTE: The machine must be power cycled (full off/on) when enabling NVM writes
+via setting the parameter to zero. Once the NVM has been locked (via the
+parameter at 1 when the driver loads) it cannot be unlocked except via power
+cycle.
+
+Debug
+-----
+:Valid Range: 0-16 (0=none,...,16=all)
+:Default Value: 0
+
+This parameter adjusts the level of debug messages displayed in the system logs.
+
+
+Additional Features and Configurations
+======================================
+
+Jumbo Frames
+------------
+Jumbo Frames support is enabled by changing the Maximum Transmission Unit (MTU)
+to a value larger than the default value of 1500.
+
+Use the ifconfig command to increase the MTU size. For example, enter the
+following where <x> is the interface number::
+
+ ifconfig eth<x> mtu 9000 up
+
+Alternatively, you can use the ip command as follows::
+
+ ip link set mtu 9000 dev eth<x>
+ ip link set up dev eth<x>
+
+This setting is not saved across reboots. The setting change can be made
+permanent by adding 'MTU=9000' to the file:
+
+- For RHEL: /etc/sysconfig/network-scripts/ifcfg-eth<x>
+- For SLES: /etc/sysconfig/network/<config_file>
+
+NOTE: The maximum MTU setting for Jumbo Frames is 8996. This value coincides
+with the maximum Jumbo Frames size of 9018 bytes.
+
+NOTE: Using Jumbo frames at 10 or 100 Mbps is not supported and may result in
+poor performance or loss of link.
+
+NOTE: The following adapters limit Jumbo Frames sized packets to a maximum of
+4088 bytes:
+
+ - Intel(R) 82578DM Gigabit Network Connection
+ - Intel(R) 82577LM Gigabit Network Connection
+
+The following adapters do not support Jumbo Frames:
+
+ - Intel(R) PRO/1000 Gigabit Server Adapter
+ - Intel(R) PRO/1000 PM Network Connection
+ - Intel(R) 82562G 10/100 Network Connection
+ - Intel(R) 82562G-2 10/100 Network Connection
+ - Intel(R) 82562GT 10/100 Network Connection
+ - Intel(R) 82562GT-2 10/100 Network Connection
+ - Intel(R) 82562V 10/100 Network Connection
+ - Intel(R) 82562V-2 10/100 Network Connection
+ - Intel(R) 82566DC Gigabit Network Connection
+ - Intel(R) 82566DC-2 Gigabit Network Connection
+ - Intel(R) 82566DM Gigabit Network Connection
+ - Intel(R) 82566MC Gigabit Network Connection
+ - Intel(R) 82566MM Gigabit Network Connection
+ - Intel(R) 82567V-3 Gigabit Network Connection
+ - Intel(R) 82577LC Gigabit Network Connection
+ - Intel(R) 82578DC Gigabit Network Connection
+
+NOTE: Jumbo Frames cannot be configured on an 82579-based Network device if
+MACSec is enabled on the system.
+
+
+ethtool
+-------
+The driver utilizes the ethtool interface for driver configuration and
+diagnostics, as well as displaying statistical information. The latest ethtool
+version is required for this functionality. Download it at:
+
+https://www.kernel.org/pub/software/network/ethtool/
+
+NOTE: When validating enable/disable tests on some parts (for example, 82578),
+it is necessary to add a few seconds between tests when working with ethtool.
+
+
+Speed and Duplex Configuration
+------------------------------
+In addressing speed and duplex configuration issues, you need to distinguish
+between copper-based adapters and fiber-based adapters.
+
+In the default mode, an Intel(R) Ethernet Network Adapter using copper
+connections will attempt to auto-negotiate with its link partner to determine
+the best setting. If the adapter cannot establish link with the link partner
+using auto-negotiation, you may need to manually configure the adapter and link
+partner to identical settings to establish link and pass packets. This should
+only be needed when attempting to link with an older switch that does not
+support auto-negotiation or one that has been forced to a specific speed or
+duplex mode. Your link partner must match the setting you choose. 1 Gbps speeds
+and higher cannot be forced. Use the autonegotiation advertising setting to
+manually set devices for 1 Gbps and higher.
+
+Speed, duplex, and autonegotiation advertising are configured through the
+ethtool* utility.
+
+Caution: Only experienced network administrators should force speed and duplex
+or change autonegotiation advertising manually. The settings at the switch must
+always match the adapter settings. Adapter performance may suffer or your
+adapter may not operate if you configure the adapter differently from your
+switch.
+
+An Intel(R) Ethernet Network Adapter using fiber-based connections, however,
+will not attempt to auto-negotiate with its link partner since those adapters
+operate only in full duplex and only at their native speed.
+
+
+Enabling Wake on LAN* (WoL)
+---------------------------
+WoL is configured through the ethtool* utility.
+
+WoL will be enabled on the system during the next shut down or reboot. For
+this driver version, in order to enable WoL, the e1000e driver must be loaded
+prior to shutting down or suspending the system.
+
+NOTE: Wake on LAN is only supported on port A for the following devices:
+- Intel(R) PRO/1000 PT Dual Port Network Connection
+- Intel(R) PRO/1000 PT Dual Port Server Connection
+- Intel(R) PRO/1000 PT Dual Port Server Adapter
+- Intel(R) PRO/1000 PF Dual Port Server Adapter
+- Intel(R) PRO/1000 PT Quad Port Server Adapter
+- Intel(R) Gigabit PT Quad Port Server ExpressModule
+
+
+Support
+=======
+For general information, go to the Intel support website at:
+
+https://www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+https://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on a supported kernel
+with a supported adapter, email the specific information related to the issue
+to e1000-devel@lists.sf.net.
diff --git a/Documentation/networking/e1000e.txt b/Documentation/networking/e1000e.txt
deleted file mode 100644
index 12089547baed..000000000000
--- a/Documentation/networking/e1000e.txt
+++ /dev/null
@@ -1,312 +0,0 @@
-Linux* Driver for Intel(R) Ethernet Network Connection
-======================================================
-
-Intel Gigabit Linux driver.
-Copyright(c) 1999 - 2013 Intel Corporation.
-
-Contents
-========
-
-- Identifying Your Adapter
-- Command Line Parameters
-- Additional Configurations
-- Support
-
-Identifying Your Adapter
-========================
-
-The e1000e driver supports all PCI Express Intel(R) Gigabit Network
-Connections, except those that are 82575, 82576 and 82580-based*.
-
-* NOTE: The Intel(R) PRO/1000 P Dual Port Server Adapter is supported by
- the e1000 driver, not the e1000e driver due to the 82546 part being used
- behind a PCI Express bridge.
-
-For more information on how to identify your adapter, go to the Adapter &
-Driver ID Guide at:
-
- http://support.intel.com/support/go/network/adapter/idguide.htm
-
-For the latest Intel network drivers for Linux, refer to the following
-website. In the search field, enter your adapter name or type, or use the
-networking link on the left to search for your adapter:
-
- http://support.intel.com/support/go/network/adapter/home.htm
-
-Command Line Parameters
-=======================
-
-The default value for each parameter is generally the recommended setting,
-unless otherwise noted.
-
-NOTES: For more information about the InterruptThrottleRate,
- RxIntDelay, TxIntDelay, RxAbsIntDelay, and TxAbsIntDelay
- parameters, see the application note at:
- http://www.intel.com/design/network/applnots/ap450.htm
-
-InterruptThrottleRate
----------------------
-Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
- 4=simplified balancing)
-Default Value: 3
-
-The driver can limit the amount of interrupts per second that the adapter
-will generate for incoming packets. It does this by writing a value to the
-adapter that is based on the maximum amount of interrupts that the adapter
-will generate per second.
-
-Setting InterruptThrottleRate to a value greater or equal to 100
-will program the adapter to send out a maximum of that many interrupts
-per second, even if more packets have come in. This reduces interrupt
-load on the system and can lower CPU utilization under heavy load,
-but will increase latency as packets are not processed as quickly.
-
-The default behaviour of the driver previously assumed a static
-InterruptThrottleRate value of 8000, providing a good fallback value for
-all traffic types, but lacking in small packet performance and latency.
-The hardware can handle many more small packets per second however, and
-for this reason an adaptive interrupt moderation algorithm was implemented.
-
-The driver has two adaptive modes (setting 1 or 3) in which
-it dynamically adjusts the InterruptThrottleRate value based on the traffic
-that it receives. After determining the type of incoming traffic in the last
-timeframe, it will adjust the InterruptThrottleRate to an appropriate value
-for that traffic.
-
-The algorithm classifies the incoming traffic every interval into
-classes. Once the class is determined, the InterruptThrottleRate value is
-adjusted to suit that traffic type the best. There are three classes defined:
-"Bulk traffic", for large amounts of packets of normal size; "Low latency",
-for small amounts of traffic and/or a significant percentage of small
-packets; and "Lowest latency", for almost completely small packets or
-minimal traffic.
-
-In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
-for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
-latency" or "Lowest latency" class, the InterruptThrottleRate is increased
-stepwise to 20000. This default mode is suitable for most applications.
-
-For situations where low latency is vital such as cluster or
-grid computing, the algorithm can reduce latency even more when
-InterruptThrottleRate is set to mode 1. In this mode, which operates
-the same as mode 3, the InterruptThrottleRate will be increased stepwise to
-70000 for traffic in class "Lowest latency".
-
-In simplified mode the interrupt rate is based on the ratio of TX and
-RX traffic. If the bytes per second rate is approximately equal, the
-interrupt rate will drop as low as 2000 interrupts per second. If the
-traffic is mostly transmit or mostly receive, the interrupt rate could
-be as high as 8000.
-
-Setting InterruptThrottleRate to 0 turns off any interrupt moderation
-and may improve small packet latency, but is generally not suitable
-for bulk throughput traffic.
-
-NOTE: InterruptThrottleRate takes precedence over the TxAbsIntDelay and
- RxAbsIntDelay parameters. In other words, minimizing the receive
- and/or transmit absolute delays does not force the controller to
- generate more interrupts than what the Interrupt Throttle Rate
- allows.
-
-NOTE: When e1000e is loaded with default settings and multiple adapters
- are in use simultaneously, the CPU utilization may increase non-
- linearly. In order to limit the CPU utilization without impacting
- the overall throughput, we recommend that you load the driver as
- follows:
-
- modprobe e1000e InterruptThrottleRate=3000,3000,3000
-
- This sets the InterruptThrottleRate to 3000 interrupts/sec for
- the first, second, and third instances of the driver. The range
- of 2000 to 3000 interrupts per second works on a majority of
- systems and is a good starting point, but the optimal value will
- be platform-specific. If CPU utilization is not a concern, use
- RX_POLLING (NAPI) and default driver settings.
-
-RxIntDelay
-----------
-Valid Range: 0-65535 (0=off)
-Default Value: 0
-
-This value delays the generation of receive interrupts in units of 1.024
-microseconds. Receive interrupt reduction can improve CPU efficiency if
-properly tuned for specific network traffic. Increasing this value adds
-extra latency to frame reception and can end up decreasing the throughput
-of TCP traffic. If the system is reporting dropped receives, this value
-may be set too high, causing the driver to run out of available receive
-descriptors.
-
-CAUTION: When setting RxIntDelay to a value other than 0, adapters may
- hang (stop transmitting) under certain network conditions. If
- this occurs a NETDEV WATCHDOG message is logged in the system
- event log. In addition, the controller is automatically reset,
- restoring the network connection. To eliminate the potential
- for the hang ensure that RxIntDelay is set to 0.
-
-RxAbsIntDelay
--------------
-Valid Range: 0-65535 (0=off)
-Default Value: 8
-
-This value, in units of 1.024 microseconds, limits the delay in which a
-receive interrupt is generated. Useful only if RxIntDelay is non-zero,
-this value ensures that an interrupt is generated after the initial
-packet is received within the set amount of time. Proper tuning,
-along with RxIntDelay, may improve traffic throughput in specific network
-conditions.
-
-TxIntDelay
-----------
-Valid Range: 0-65535 (0=off)
-Default Value: 8
-
-This value delays the generation of transmit interrupts in units of
-1.024 microseconds. Transmit interrupt reduction can improve CPU
-efficiency if properly tuned for specific network traffic. If the
-system is reporting dropped transmits, this value may be set too high
-causing the driver to run out of available transmit descriptors.
-
-TxAbsIntDelay
--------------
-Valid Range: 0-65535 (0=off)
-Default Value: 32
-
-This value, in units of 1.024 microseconds, limits the delay in which a
-transmit interrupt is generated. Useful only if TxIntDelay is non-zero,
-this value ensures that an interrupt is generated after the initial
-packet is sent on the wire within the set amount of time. Proper tuning,
-along with TxIntDelay, may improve traffic throughput in specific
-network conditions.
-
-Copybreak
----------
-Valid Range: 0-xxxxxxx (0=off)
-Default Value: 256
-
-Driver copies all packets below or equaling this size to a fresh RX
-buffer before handing it up the stack.
-
-This parameter is different than other parameters, in that it is a
-single (not 1,1,1 etc.) parameter applied to all driver instances and
-it is also available during runtime at
-/sys/module/e1000e/parameters/copybreak
-
-SmartPowerDownEnable
---------------------
-Valid Range: 0-1
-Default Value: 0 (disabled)
-
-Allows PHY to turn off in lower power states. The user can set this parameter
-in supported chipsets.
-
-KumeranLockLoss
----------------
-Valid Range: 0-1
-Default Value: 1 (enabled)
-
-This workaround skips resetting the PHY at shutdown for the initial
-silicon releases of ICH8 systems.
-
-IntMode
--------
-Valid Range: 0-2 (0=legacy, 1=MSI, 2=MSI-X)
-Default Value: 2
-
-Allows changing the interrupt mode at module load time, without requiring a
-recompile. If the driver load fails to enable a specific interrupt mode, the
-driver will try other interrupt modes, from least to most compatible. The
-interrupt order is MSI-X, MSI, Legacy. If specifying MSI (IntMode=1)
-interrupts, only MSI and Legacy will be attempted.
-
-CrcStripping
-------------
-Valid Range: 0-1
-Default Value: 1 (enabled)
-
-Strip the CRC from received packets before sending up the network stack. If
-you have a machine with a BMC enabled but cannot receive IPMI traffic after
-loading or enabling the driver, try disabling this feature.
-
-WriteProtectNVM
----------------
-Valid Range: 0,1
-Default Value: 1
-
-If set to 1, configure the hardware to ignore all write/erase cycles to the
-GbE region in the ICHx NVM (in order to prevent accidental corruption of the
-NVM). This feature can be disabled by setting the parameter to 0 during initial
-driver load.
-NOTE: The machine must be power cycled (full off/on) when enabling NVM writes
-via setting the parameter to zero. Once the NVM has been locked (via the
-parameter at 1 when the driver loads) it cannot be unlocked except via power
-cycle.
-
-Additional Configurations
-=========================
-
- Jumbo Frames
- ------------
- Jumbo Frames support is enabled by changing the MTU to a value larger than
- the default of 1500. Use the ifconfig command to increase the MTU size.
- For example:
-
- ifconfig eth<x> mtu 9000 up
-
- This setting is not saved across reboots.
-
- Notes:
-
- - The maximum MTU setting for Jumbo Frames is 9216. This value coincides
- with the maximum Jumbo Frames size of 9234 bytes.
-
- - Using Jumbo frames at 10 or 100 Mbps is not supported and may result in
- poor performance or loss of link.
-
- - Some adapters limit Jumbo Frames sized packets to a maximum of
- 4096 bytes and some adapters do not support Jumbo Frames.
-
- - Jumbo Frames cannot be configured on an 82579-based Network device, if
- MACSec is enabled on the system.
-
- ethtool
- -------
- The driver utilizes the ethtool interface for driver configuration and
- diagnostics, as well as displaying statistical information. We
- strongly recommend downloading the latest version of ethtool at:
-
- https://kernel.org/pub/software/network/ethtool/
-
- NOTE: When validating enable/disable tests on some parts (82578, for example)
- you need to add a few seconds between tests when working with ethtool.
-
- Speed and Duplex
- ----------------
- Speed and Duplex are configured through the ethtool* utility. For
- instructions, refer to the ethtool man page.
-
- Enabling Wake on LAN* (WoL)
- ---------------------------
- WoL is configured through the ethtool* utility. For instructions on
- enabling WoL with ethtool, refer to the ethtool man page.
-
- WoL will be enabled on the system during the next shut down or reboot.
- For this driver version, in order to enable WoL, the e1000e driver must be
- loaded when shutting down or rebooting the system.
-
- In most cases Wake On LAN is only supported on port A for multiple port
- adapters. To verify if a port supports Wake on Lan run ethtool eth<X>.
-
-Support
-=======
-
-For general information, go to the Intel support website at:
-
- www.intel.com/support/
-
-or the Intel Wired Networking project hosted by Sourceforge at:
-
- http://sourceforge.net/projects/e1000
-
-If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related
-to the issue to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt
index e6b4ebb2b243..2196b824e96c 100644
--- a/Documentation/networking/filter.txt
+++ b/Documentation/networking/filter.txt
@@ -203,11 +203,11 @@ opcodes as defined in linux/filter.h stand for:
Instruction Addressing mode Description
- ld 1, 2, 3, 4, 10 Load word into A
+ ld 1, 2, 3, 4, 12 Load word into A
ldi 4 Load word into A
ldh 1, 2 Load half-word into A
ldb 1, 2 Load byte into A
- ldx 3, 4, 5, 10 Load word into X
+ ldx 3, 4, 5, 12 Load word into X
ldxi 4 Load word into X
ldxb 5 Load byte into X
@@ -216,14 +216,14 @@ opcodes as defined in linux/filter.h stand for:
jmp 6 Jump to label
ja 6 Jump to label
- jeq 7, 8 Jump on A == k
- jneq 8 Jump on A != k
- jne 8 Jump on A != k
- jlt 8 Jump on A < k
- jle 8 Jump on A <= k
- jgt 7, 8 Jump on A > k
- jge 7, 8 Jump on A >= k
- jset 7, 8 Jump on A & k
+ jeq 7, 8, 9, 10 Jump on A == <x>
+ jneq 9, 10 Jump on A != <x>
+ jne 9, 10 Jump on A != <x>
+ jlt 9, 10 Jump on A < <x>
+ jle 9, 10 Jump on A <= <x>
+ jgt 7, 8, 9, 10 Jump on A > <x>
+ jge 7, 8, 9, 10 Jump on A >= <x>
+ jset 7, 8, 9, 10 Jump on A & <x>
add 0, 4 A + <x>
sub 0, 4 A - <x>
@@ -240,7 +240,7 @@ opcodes as defined in linux/filter.h stand for:
tax Copy A into X
txa Copy X into A
- ret 4, 9 Return
+ ret 4, 11 Return
The next table shows addressing formats from the 2nd column:
@@ -254,9 +254,11 @@ The next table shows addressing formats from the 2nd column:
5 4*([k]&0xf) Lower nibble * 4 at byte offset k in the packet
6 L Jump label L
7 #k,Lt,Lf Jump to Lt if true, otherwise jump to Lf
- 8 #k,Lt Jump to Lt if predicate is true
- 9 a/%a Accumulator A
- 10 extension BPF extension
+ 8 x/%x,Lt,Lf Jump to Lt if true, otherwise jump to Lf
+ 9 #k,Lt Jump to Lt if predicate is true
+ 10 x/%x,Lt Jump to Lt if predicate is true
+ 11 a/%a Accumulator A
+ 12 extension BPF extension
The Linux kernel also has a couple of BPF extensions that are used along
with the class of load instructions by "overloading" the k argument with
@@ -1125,6 +1127,14 @@ pointer type. The types of pointers describe their base, as follows:
PTR_TO_STACK Frame pointer.
PTR_TO_PACKET skb->data.
PTR_TO_PACKET_END skb->data + headlen; arithmetic forbidden.
+ PTR_TO_SOCKET Pointer to struct bpf_sock_ops, implicitly refcounted.
+ PTR_TO_SOCKET_OR_NULL
+ Either a pointer to a socket, or NULL; socket lookup
+ returns this type, which becomes a PTR_TO_SOCKET when
+ checked != NULL. PTR_TO_SOCKET is reference-counted,
+ so programs must release the reference through the
+ socket release function before the end of the program.
+ Arithmetic on these pointers is forbidden.
However, a pointer may be offset from this base (as a result of pointer
arithmetic), and this is tracked in two parts: the 'fixed offset' and 'variable
offset'. The former is used when an exactly-known value (e.g. an immediate
@@ -1171,6 +1181,13 @@ over the Ethernet header, then reads IHL and addes (IHL * 4), the resulting
pointer will have a variable offset known to be 4n+2 for some n, so adding the 2
bytes (NET_IP_ALIGN) gives a 4-byte alignment and so word-sized accesses through
that pointer are safe.
+The 'id' field is also used on PTR_TO_SOCKET and PTR_TO_SOCKET_OR_NULL, common
+to all copies of the pointer returned from a socket lookup. This has similar
+behaviour to the handling for PTR_TO_MAP_VALUE_OR_NULL->PTR_TO_MAP_VALUE, but
+it also handles reference tracking for the pointer. PTR_TO_SOCKET implicitly
+represents a reference to the corresponding 'struct sock'. To ensure that the
+reference is not leaked, it is imperative to NULL-check the reference and in
+the non-NULL case, and pass the valid reference to the socket release function.
Direct packet access
--------------------
@@ -1444,6 +1461,55 @@ Error:
8: (7a) *(u64 *)(r0 +0) = 1
R0 invalid mem access 'imm'
+Program that performs a socket lookup then sets the pointer to NULL without
+checking it:
+value:
+ BPF_MOV64_IMM(BPF_REG_2, 0),
+ BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_2, -8),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_MOV64_IMM(BPF_REG_3, 4),
+ BPF_MOV64_IMM(BPF_REG_4, 0),
+ BPF_MOV64_IMM(BPF_REG_5, 0),
+ BPF_EMIT_CALL(BPF_FUNC_sk_lookup_tcp),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+Error:
+ 0: (b7) r2 = 0
+ 1: (63) *(u32 *)(r10 -8) = r2
+ 2: (bf) r2 = r10
+ 3: (07) r2 += -8
+ 4: (b7) r3 = 4
+ 5: (b7) r4 = 0
+ 6: (b7) r5 = 0
+ 7: (85) call bpf_sk_lookup_tcp#65
+ 8: (b7) r0 = 0
+ 9: (95) exit
+ Unreleased reference id=1, alloc_insn=7
+
+Program that performs a socket lookup but does not NULL-check the returned
+value:
+ BPF_MOV64_IMM(BPF_REG_2, 0),
+ BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_2, -8),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_MOV64_IMM(BPF_REG_3, 4),
+ BPF_MOV64_IMM(BPF_REG_4, 0),
+ BPF_MOV64_IMM(BPF_REG_5, 0),
+ BPF_EMIT_CALL(BPF_FUNC_sk_lookup_tcp),
+ BPF_EXIT_INSN(),
+Error:
+ 0: (b7) r2 = 0
+ 1: (63) *(u32 *)(r10 -8) = r2
+ 2: (bf) r2 = r10
+ 3: (07) r2 += -8
+ 4: (b7) r3 = 4
+ 5: (b7) r4 = 0
+ 6: (b7) r5 = 0
+ 7: (85) call bpf_sk_lookup_tcp#65
+ 8: (95) exit
+ Unreleased reference id=1, alloc_insn=7
+
Testing
-------
diff --git a/Documentation/networking/fm10k.rst b/Documentation/networking/fm10k.rst
new file mode 100644
index 000000000000..bf5e5942f28d
--- /dev/null
+++ b/Documentation/networking/fm10k.rst
@@ -0,0 +1,141 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Linux* Base Driver for Intel(R) Ethernet Multi-host Controller
+==============================================================
+
+August 20, 2018
+Copyright(c) 2015-2018 Intel Corporation.
+
+Contents
+========
+- Identifying Your Adapter
+- Additional Configurations
+- Performance Tuning
+- Known Issues
+- Support
+
+Identifying Your Adapter
+========================
+The driver in this release is compatible with devices based on the Intel(R)
+Ethernet Multi-host Controller.
+
+For information on how to identify your adapter, and for the latest Intel
+network drivers, refer to the Intel Support website:
+http://www.intel.com/support
+
+
+Flow Control
+------------
+The Intel(R) Ethernet Switch Host Interface Driver does not support Flow
+Control. It will not send pause frames. This may result in dropped frames.
+
+
+Virtual Functions (VFs)
+-----------------------
+Use sysfs to enable VFs.
+Valid Range: 0-64
+
+For example::
+
+ echo $num_vf_enabled > /sys/class/net/$dev/device/sriov_numvfs //enable VFs
+ echo 0 > /sys/class/net/$dev/device/sriov_numvfs //disable VFs
+
+NOTE: Neither the device nor the driver control how VFs are mapped into config
+space. Bus layout will vary by operating system. On operating systems that
+support it, you can check sysfs to find the mapping.
+
+NOTE: When SR-IOV mode is enabled, hardware VLAN filtering and VLAN tag
+stripping/insertion will remain enabled. Please remove the old VLAN filter
+before the new VLAN filter is added. For example::
+
+ ip link set eth0 vf 0 vlan 100 // set vlan 100 for VF 0
+ ip link set eth0 vf 0 vlan 0 // Delete vlan 100
+ ip link set eth0 vf 0 vlan 200 // set a new vlan 200 for VF 0
+
+
+Additional Features and Configurations
+======================================
+
+Jumbo Frames
+------------
+Jumbo Frames support is enabled by changing the Maximum Transmission Unit (MTU)
+to a value larger than the default value of 1500.
+
+Use the ifconfig command to increase the MTU size. For example, enter the
+following where <x> is the interface number::
+
+ ifconfig eth<x> mtu 9000 up
+
+Alternatively, you can use the ip command as follows::
+
+ ip link set mtu 9000 dev eth<x>
+ ip link set up dev eth<x>
+
+This setting is not saved across reboots. The setting change can be made
+permanent by adding 'MTU=9000' to the file:
+
+- For RHEL: /etc/sysconfig/network-scripts/ifcfg-eth<x>
+- For SLES: /etc/sysconfig/network/<config_file>
+
+NOTE: The maximum MTU setting for Jumbo Frames is 15342. This value coincides
+with the maximum Jumbo Frames size of 15364 bytes.
+
+NOTE: This driver will attempt to use multiple page sized buffers to receive
+each jumbo packet. This should help to avoid buffer starvation issues when
+allocating receive packets.
+
+
+Generic Receive Offload, aka GRO
+--------------------------------
+The driver supports the in-kernel software implementation of GRO. GRO has
+shown that by coalescing Rx traffic into larger chunks of data, CPU
+utilization can be significantly reduced when under large Rx load. GRO is an
+evolution of the previously-used LRO interface. GRO is able to coalesce
+other protocols besides TCP. It's also safe to use with configurations that
+are problematic for LRO, namely bridging and iSCSI.
+
+
+
+Supported ethtool Commands and Options for Filtering
+----------------------------------------------------
+-n --show-nfc
+ Retrieves the receive network flow classification configurations.
+
+rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6
+ Retrieves the hash options for the specified network traffic type.
+
+-N --config-nfc
+ Configures the receive network flow classification.
+
+rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6 m|v|t|s|d|f|n|r
+ Configures the hash options for the specified network traffic type.
+
+- udp4: UDP over IPv4
+- udp6: UDP over IPv6
+- f Hash on bytes 0 and 1 of the Layer 4 header of the rx packet.
+- n Hash on bytes 2 and 3 of the Layer 4 header of the rx packet.
+
+
+Known Issues/Troubleshooting
+============================
+
+Enabling SR-IOV in a 64-bit Microsoft* Windows Server* 2012/R2 guest OS under Linux KVM
+---------------------------------------------------------------------------------------
+KVM Hypervisor/VMM supports direct assignment of a PCIe device to a VM. This
+includes traditional PCIe devices, as well as SR-IOV-capable devices based on
+the Intel Ethernet Controller XL710.
+
+
+Support
+=======
+For general information, go to the Intel support website at:
+
+https://www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+https://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on a supported kernel
+with a supported adapter, email the specific information related to the issue
+to e1000-devel@lists.sf.net.
diff --git a/Documentation/networking/i40e.rst b/Documentation/networking/i40e.rst
new file mode 100644
index 000000000000..0cc16c525d10
--- /dev/null
+++ b/Documentation/networking/i40e.rst
@@ -0,0 +1,770 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Linux* Base Driver for the Intel(R) Ethernet Controller 700 Series
+==================================================================
+
+Intel 40 Gigabit Linux driver.
+Copyright(c) 1999-2018 Intel Corporation.
+
+Contents
+========
+
+- Overview
+- Identifying Your Adapter
+- Intel(R) Ethernet Flow Director
+- Additional Configurations
+- Known Issues
+- Support
+
+
+Driver information can be obtained using ethtool, lspci, and ifconfig.
+Instructions on updating ethtool can be found in the section Additional
+Configurations later in this document.
+
+For questions related to hardware requirements, refer to the documentation
+supplied with your Intel adapter. All hardware requirements listed apply to use
+with Linux.
+
+
+Identifying Your Adapter
+========================
+The driver is compatible with devices based on the following:
+
+ * Intel(R) Ethernet Controller X710
+ * Intel(R) Ethernet Controller XL710
+ * Intel(R) Ethernet Network Connection X722
+ * Intel(R) Ethernet Controller XXV710
+
+For the best performance, make sure the latest NVM/FW is installed on your
+device.
+
+For information on how to identify your adapter, and for the latest NVM/FW
+images and Intel network drivers, refer to the Intel Support website:
+https://www.intel.com/support
+
+SFP+ and QSFP+ Devices
+----------------------
+For information about supported media, refer to this document:
+https://www.intel.com/content/dam/www/public/us/en/documents/release-notes/xl710-ethernet-controller-feature-matrix.pdf
+
+NOTE: Some adapters based on the Intel(R) Ethernet Controller 700 Series only
+support Intel Ethernet Optics modules. On these adapters, other modules are not
+supported and will not function. In all cases Intel recommends using Intel
+Ethernet Optics; other modules may function but are not validated by Intel.
+Contact Intel for supported media types.
+
+NOTE: For connections based on Intel(R) Ethernet Controller 700 Series, support
+is dependent on your system board. Please see your vendor for details.
+
+NOTE: In systems that do not have adequate airflow to cool the adapter and
+optical modules, you must use high temperature optical modules.
+
+Virtual Functions (VFs)
+-----------------------
+Use sysfs to enable VFs. For example::
+
+ #echo $num_vf_enabled > /sys/class/net/$dev/device/sriov_numvfs #enable VFs
+ #echo 0 > /sys/class/net/$dev/device/sriov_numvfs #disable VFs
+
+For example, the following instructions will configure PF eth0 and the first VF
+on VLAN 10::
+
+ $ ip link set dev eth0 vf 0 vlan 10
+
+VLAN Tag Packet Steering
+------------------------
+Allows you to send all packets with a specific VLAN tag to a particular SR-IOV
+virtual function (VF). Further, this feature allows you to designate a
+particular VF as trusted, and allows that trusted VF to request selective
+promiscuous mode on the Physical Function (PF).
+
+To set a VF as trusted or untrusted, enter the following command in the
+Hypervisor::
+
+ # ip link set dev eth0 vf 1 trust [on|off]
+
+Once the VF is designated as trusted, use the following commands in the VM to
+set the VF to promiscuous mode.
+
+::
+
+ For promiscuous all:
+ #ip link set eth2 promisc on
+ Where eth2 is a VF interface in the VM
+
+ For promiscuous Multicast:
+ #ip link set eth2 allmulticast on
+ Where eth2 is a VF interface in the VM
+
+NOTE: By default, the ethtool priv-flag vf-true-promisc-support is set to
+"off",meaning that promiscuous mode for the VF will be limited. To set the
+promiscuous mode for the VF to true promiscuous and allow the VF to see all
+ingress traffic, use the following command::
+
+ #ethtool -set-priv-flags p261p1 vf-true-promisc-support on
+
+The vf-true-promisc-support priv-flag does not enable promiscuous mode; rather,
+it designates which type of promiscuous mode (limited or true) you will get
+when you enable promiscuous mode using the ip link commands above. Note that
+this is a global setting that affects the entire device. However,the
+vf-true-promisc-support priv-flag is only exposed to the first PF of the
+device. The PF remains in limited promiscuous mode (unless it is in MFP mode)
+regardless of the vf-true-promisc-support setting.
+
+Now add a VLAN interface on the VF interface::
+
+ #ip link add link eth2 name eth2.100 type vlan id 100
+
+Note that the order in which you set the VF to promiscuous mode and add the
+VLAN interface does not matter (you can do either first). The end result in
+this example is that the VF will get all traffic that is tagged with VLAN 100.
+
+Intel(R) Ethernet Flow Director
+-------------------------------
+The Intel Ethernet Flow Director performs the following tasks:
+
+- Directs receive packets according to their flows to different queues.
+- Enables tight control on routing a flow in the platform.
+- Matches flows and CPU cores for flow affinity.
+- Supports multiple parameters for flexible flow classification and load
+ balancing (in SFP mode only).
+
+NOTE: The Linux i40e driver supports the following flow types: IPv4, TCPv4, and
+UDPv4. For a given flow type, it supports valid combinations of IP addresses
+(source or destination) and UDP/TCP ports (source and destination). For
+example, you can supply only a source IP address, a source IP address and a
+destination port, or any combination of one or more of these four parameters.
+
+NOTE: The Linux i40e driver allows you to filter traffic based on a
+user-defined flexible two-byte pattern and offset by using the ethtool user-def
+and mask fields. Only L3 and L4 flow types are supported for user-defined
+flexible filters. For a given flow type, you must clear all Intel Ethernet Flow
+Director filters before changing the input set (for that flow type).
+
+To enable or disable the Intel Ethernet Flow Director::
+
+ # ethtool -K ethX ntuple <on|off>
+
+When disabling ntuple filters, all the user programmed filters are flushed from
+the driver cache and hardware. All needed filters must be re-added when ntuple
+is re-enabled.
+
+To add a filter that directs packet to queue 2, use -U or -N switch::
+
+ # ethtool -N ethX flow-type tcp4 src-ip 192.168.10.1 dst-ip \
+ 192.168.10.2 src-port 2000 dst-port 2001 action 2 [loc 1]
+
+To set a filter using only the source and destination IP address::
+
+ # ethtool -N ethX flow-type tcp4 src-ip 192.168.10.1 dst-ip \
+ 192.168.10.2 action 2 [loc 1]
+
+To see the list of filters currently present::
+
+ # ethtool <-u|-n> ethX
+
+Application Targeted Routing (ATR) Perfect Filters
+--------------------------------------------------
+ATR is enabled by default when the kernel is in multiple transmit queue mode.
+An ATR Intel Ethernet Flow Director filter rule is added when a TCP-IP flow
+starts and is deleted when the flow ends. When a TCP-IP Intel Ethernet Flow
+Director rule is added from ethtool (Sideband filter), ATR is turned off by the
+driver. To re-enable ATR, the sideband can be disabled with the ethtool -K
+option. For example::
+
+ ethtool –K [adapter] ntuple [off|on]
+
+If sideband is re-enabled after ATR is re-enabled, ATR remains enabled until a
+TCP-IP flow is added. When all TCP-IP sideband rules are deleted, ATR is
+automatically re-enabled.
+
+Packets that match the ATR rules are counted in fdir_atr_match stats in
+ethtool, which also can be used to verify whether ATR rules still exist.
+
+Sideband Perfect Filters
+------------------------
+Sideband Perfect Filters are used to direct traffic that matches specified
+characteristics. They are enabled through ethtool's ntuple interface. To add a
+new filter use the following command::
+
+ ethtool -U <device> flow-type <type> src-ip <ip> dst-ip <ip> src-port <port> \
+ dst-port <port> action <queue>
+
+Where:
+ <device> - the ethernet device to program
+ <type> - can be ip4, tcp4, udp4, or sctp4
+ <ip> - the ip address to match on
+ <port> - the port number to match on
+ <queue> - the queue to direct traffic towards (-1 discards matching traffic)
+
+Use the following command to display all of the active filters::
+
+ ethtool -u <device>
+
+Use the following command to delete a filter::
+
+ ethtool -U <device> delete <N>
+
+Where <N> is the filter id displayed when printing all the active filters, and
+may also have been specified using "loc <N>" when adding the filter.
+
+The following example matches TCP traffic sent from 192.168.0.1, port 5300,
+directed to 192.168.0.5, port 80, and sends it to queue 7::
+
+ ethtool -U enp130s0 flow-type tcp4 src-ip 192.168.0.1 dst-ip 192.168.0.5 \
+ src-port 5300 dst-port 80 action 7
+
+For each flow-type, the programmed filters must all have the same matching
+input set. For example, issuing the following two commands is acceptable::
+
+ ethtool -U enp130s0 flow-type ip4 src-ip 192.168.0.1 src-port 5300 action 7
+ ethtool -U enp130s0 flow-type ip4 src-ip 192.168.0.5 src-port 55 action 10
+
+Issuing the next two commands, however, is not acceptable, since the first
+specifies src-ip and the second specifies dst-ip::
+
+ ethtool -U enp130s0 flow-type ip4 src-ip 192.168.0.1 src-port 5300 action 7
+ ethtool -U enp130s0 flow-type ip4 dst-ip 192.168.0.5 src-port 55 action 10
+
+The second command will fail with an error. You may program multiple filters
+with the same fields, using different values, but, on one device, you may not
+program two tcp4 filters with different matching fields.
+
+Matching on a sub-portion of a field is not supported by the i40e driver, thus
+partial mask fields are not supported.
+
+The driver also supports matching user-defined data within the packet payload.
+This flexible data is specified using the "user-def" field of the ethtool
+command in the following way:
+
++----------------------------+--------------------------+
+| 31 28 24 20 16 | 15 12 8 4 0 |
++----------------------------+--------------------------+
+| offset into packet payload | 2 bytes of flexible data |
++----------------------------+--------------------------+
+
+For example,
+
+::
+
+ ... user-def 0x4FFFF ...
+
+tells the filter to look 4 bytes into the payload and match that value against
+0xFFFF. The offset is based on the beginning of the payload, and not the
+beginning of the packet. Thus
+
+::
+
+ flow-type tcp4 ... user-def 0x8BEAF ...
+
+would match TCP/IPv4 packets which have the value 0xBEAF 8 bytes into the
+TCP/IPv4 payload.
+
+Note that ICMP headers are parsed as 4 bytes of header and 4 bytes of payload.
+Thus to match the first byte of the payload, you must actually add 4 bytes to
+the offset. Also note that ip4 filters match both ICMP frames as well as raw
+(unknown) ip4 frames, where the payload will be the L3 payload of the IP4 frame.
+
+The maximum offset is 64. The hardware will only read up to 64 bytes of data
+from the payload. The offset must be even because the flexible data is 2 bytes
+long and must be aligned to byte 0 of the packet payload.
+
+The user-defined flexible offset is also considered part of the input set and
+cannot be programmed separately for multiple filters of the same type. However,
+the flexible data is not part of the input set and multiple filters may use the
+same offset but match against different data.
+
+To create filters that direct traffic to a specific Virtual Function, use the
+"action" parameter. Specify the action as a 64 bit value, where the lower 32
+bits represents the queue number, while the next 8 bits represent which VF.
+Note that 0 is the PF, so the VF identifier is offset by 1. For example::
+
+ ... action 0x800000002 ...
+
+specifies to direct traffic to Virtual Function 7 (8 minus 1) into queue 2 of
+that VF.
+
+Note that these filters will not break internal routing rules, and will not
+route traffic that otherwise would not have been sent to the specified Virtual
+Function.
+
+Setting the link-down-on-close Private Flag
+-------------------------------------------
+When the link-down-on-close private flag is set to "on", the port's link will
+go down when the interface is brought down using the ifconfig ethX down command.
+
+Use ethtool to view and set link-down-on-close, as follows::
+
+ ethtool --show-priv-flags ethX
+ ethtool --set-priv-flags ethX link-down-on-close [on|off]
+
+Viewing Link Messages
+---------------------
+Link messages will not be displayed to the console if the distribution is
+restricting system messages. In order to see network driver link messages on
+your console, set dmesg to eight by entering the following::
+
+ dmesg -n 8
+
+NOTE: This setting is not saved across reboots.
+
+Jumbo Frames
+------------
+Jumbo Frames support is enabled by changing the Maximum Transmission Unit (MTU)
+to a value larger than the default value of 1500.
+
+Use the ifconfig command to increase the MTU size. For example, enter the
+following where <x> is the interface number::
+
+ ifconfig eth<x> mtu 9000 up
+
+Alternatively, you can use the ip command as follows::
+
+ ip link set mtu 9000 dev eth<x>
+ ip link set up dev eth<x>
+
+This setting is not saved across reboots. The setting change can be made
+permanent by adding 'MTU=9000' to the file::
+
+ /etc/sysconfig/network-scripts/ifcfg-eth<x> // for RHEL
+ /etc/sysconfig/network/<config_file> // for SLES
+
+NOTE: The maximum MTU setting for Jumbo Frames is 9702. This value coincides
+with the maximum Jumbo Frames size of 9728 bytes.
+
+NOTE: This driver will attempt to use multiple page sized buffers to receive
+each jumbo packet. This should help to avoid buffer starvation issues when
+allocating receive packets.
+
+ethtool
+-------
+The driver utilizes the ethtool interface for driver configuration and
+diagnostics, as well as displaying statistical information. The latest ethtool
+version is required for this functionality. Download it at:
+https://www.kernel.org/pub/software/network/ethtool/
+
+Supported ethtool Commands and Options for Filtering
+----------------------------------------------------
+-n --show-nfc
+ Retrieves the receive network flow classification configurations.
+
+rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6
+ Retrieves the hash options for the specified network traffic type.
+
+-N --config-nfc
+ Configures the receive network flow classification.
+
+rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6 m|v|t|s|d|f|n|r...
+ Configures the hash options for the specified network traffic type.
+
+udp4 UDP over IPv4
+udp6 UDP over IPv6
+
+f Hash on bytes 0 and 1 of the Layer 4 header of the Rx packet.
+n Hash on bytes 2 and 3 of the Layer 4 header of the Rx packet.
+
+Speed and Duplex Configuration
+------------------------------
+In addressing speed and duplex configuration issues, you need to distinguish
+between copper-based adapters and fiber-based adapters.
+
+In the default mode, an Intel(R) Ethernet Network Adapter using copper
+connections will attempt to auto-negotiate with its link partner to determine
+the best setting. If the adapter cannot establish link with the link partner
+using auto-negotiation, you may need to manually configure the adapter and link
+partner to identical settings to establish link and pass packets. This should
+only be needed when attempting to link with an older switch that does not
+support auto-negotiation or one that has been forced to a specific speed or
+duplex mode. Your link partner must match the setting you choose. 1 Gbps speeds
+and higher cannot be forced. Use the autonegotiation advertising setting to
+manually set devices for 1 Gbps and higher.
+
+NOTE: You cannot set the speed for devices based on the Intel(R) Ethernet
+Network Adapter XXV710 based devices.
+
+Speed, duplex, and autonegotiation advertising are configured through the
+ethtool* utility.
+
+Caution: Only experienced network administrators should force speed and duplex
+or change autonegotiation advertising manually. The settings at the switch must
+always match the adapter settings. Adapter performance may suffer or your
+adapter may not operate if you configure the adapter differently from your
+switch.
+
+An Intel(R) Ethernet Network Adapter using fiber-based connections, however,
+will not attempt to auto-negotiate with its link partner since those adapters
+operate only in full duplex and only at their native speed.
+
+NAPI
+----
+NAPI (Rx polling mode) is supported in the i40e driver.
+For more information on NAPI, see
+https://wiki.linuxfoundation.org/networking/napi
+
+Flow Control
+------------
+Ethernet Flow Control (IEEE 802.3x) can be configured with ethtool to enable
+receiving and transmitting pause frames for i40e. When transmit is enabled,
+pause frames are generated when the receive packet buffer crosses a predefined
+threshold. When receive is enabled, the transmit unit will halt for the time
+delay specified when a pause frame is received.
+
+NOTE: You must have a flow control capable link partner.
+
+Flow Control is on by default.
+
+Use ethtool to change the flow control settings.
+
+To enable or disable Rx or Tx Flow Control::
+
+ ethtool -A eth? rx <on|off> tx <on|off>
+
+Note: This command only enables or disables Flow Control if auto-negotiation is
+disabled. If auto-negotiation is enabled, this command changes the parameters
+used for auto-negotiation with the link partner.
+
+To enable or disable auto-negotiation::
+
+ ethtool -s eth? autoneg <on|off>
+
+Note: Flow Control auto-negotiation is part of link auto-negotiation. Depending
+on your device, you may not be able to change the auto-negotiation setting.
+
+RSS Hash Flow
+-------------
+Allows you to set the hash bytes per flow type and any combination of one or
+more options for Receive Side Scaling (RSS) hash byte configuration.
+
+::
+
+ # ethtool -N <dev> rx-flow-hash <type> <option>
+
+Where <type> is:
+ tcp4 signifying TCP over IPv4
+ udp4 signifying UDP over IPv4
+ tcp6 signifying TCP over IPv6
+ udp6 signifying UDP over IPv6
+And <option> is one or more of:
+ s Hash on the IP source address of the Rx packet.
+ d Hash on the IP destination address of the Rx packet.
+ f Hash on bytes 0 and 1 of the Layer 4 header of the Rx packet.
+ n Hash on bytes 2 and 3 of the Layer 4 header of the Rx packet.
+
+MAC and VLAN anti-spoofing feature
+----------------------------------
+When a malicious driver attempts to send a spoofed packet, it is dropped by the
+hardware and not transmitted.
+NOTE: This feature can be disabled for a specific Virtual Function (VF)::
+
+ ip link set <pf dev> vf <vf id> spoofchk {off|on}
+
+IEEE 1588 Precision Time Protocol (PTP) Hardware Clock (PHC)
+------------------------------------------------------------
+Precision Time Protocol (PTP) is used to synchronize clocks in a computer
+network. PTP support varies among Intel devices that support this driver. Use
+"ethtool -T <netdev name>" to get a definitive list of PTP capabilities
+supported by the device.
+
+IEEE 802.1ad (QinQ) Support
+---------------------------
+The IEEE 802.1ad standard, informally known as QinQ, allows for multiple VLAN
+IDs within a single Ethernet frame. VLAN IDs are sometimes referred to as
+"tags," and multiple VLAN IDs are thus referred to as a "tag stack." Tag stacks
+allow L2 tunneling and the ability to segregate traffic within a particular
+VLAN ID, among other uses.
+
+The following are examples of how to configure 802.1ad (QinQ)::
+
+ ip link add link eth0 eth0.24 type vlan proto 802.1ad id 24
+ ip link add link eth0.24 eth0.24.371 type vlan proto 802.1Q id 371
+
+Where "24" and "371" are example VLAN IDs.
+
+NOTES:
+ Receive checksum offloads, cloud filters, and VLAN acceleration are not
+ supported for 802.1ad (QinQ) packets.
+
+VXLAN and GENEVE Overlay HW Offloading
+--------------------------------------
+Virtual Extensible LAN (VXLAN) allows you to extend an L2 network over an L3
+network, which may be useful in a virtualized or cloud environment. Some
+Intel(R) Ethernet Network devices perform VXLAN processing, offloading it from
+the operating system. This reduces CPU utilization.
+
+VXLAN offloading is controlled by the Tx and Rx checksum offload options
+provided by ethtool. That is, if Tx checksum offload is enabled, and the
+adapter has the capability, VXLAN offloading is also enabled.
+
+Support for VXLAN and GENEVE HW offloading is dependent on kernel support of
+the HW offloading features.
+
+Multiple Functions per Port
+---------------------------
+Some adapters based on the Intel Ethernet Controller X710/XL710 support
+multiple functions on a single physical port. Configure these functions through
+the System Setup/BIOS.
+
+Minimum TX Bandwidth is the guaranteed minimum data transmission bandwidth, as
+a percentage of the full physical port link speed, that the partition will
+receive. The bandwidth the partition is awarded will never fall below the level
+you specify.
+
+The range for the minimum bandwidth values is:
+1 to ((100 minus # of partitions on the physical port) plus 1)
+For example, if a physical port has 4 partitions, the range would be:
+1 to ((100 - 4) + 1 = 97)
+
+The Maximum Bandwidth percentage represents the maximum transmit bandwidth
+allocated to the partition as a percentage of the full physical port link
+speed. The accepted range of values is 1-100. The value is used as a limiter,
+should you chose that any one particular function not be able to consume 100%
+of a port's bandwidth (should it be available). The sum of all the values for
+Maximum Bandwidth is not restricted, because no more than 100% of a port's
+bandwidth can ever be used.
+
+NOTE: X710/XXV710 devices fail to enable Max VFs (64) when Multiple Functions
+per Port (MFP) and SR-IOV are enabled. An error from i40e is logged that says
+"add vsi failed for VF N, aq_err 16". To workaround the issue, enable less than
+64 virtual functions (VFs).
+
+Data Center Bridging (DCB)
+--------------------------
+DCB is a configuration Quality of Service implementation in hardware. It uses
+the VLAN priority tag (802.1p) to filter traffic. That means that there are 8
+different priorities that traffic can be filtered into. It also enables
+priority flow control (802.1Qbb) which can limit or eliminate the number of
+dropped packets during network stress. Bandwidth can be allocated to each of
+these priorities, which is enforced at the hardware level (802.1Qaz).
+
+Adapter firmware implements LLDP and DCBX protocol agents as per 802.1AB and
+802.1Qaz respectively. The firmware based DCBX agent runs in willing mode only
+and can accept settings from a DCBX capable peer. Software configuration of
+DCBX parameters via dcbtool/lldptool are not supported.
+
+NOTE: Firmware LLDP can be disabled by setting the private flag disable-fw-lldp.
+
+The i40e driver implements the DCB netlink interface layer to allow user-space
+to communicate with the driver and query DCB configuration for the port.
+
+NOTE:
+The kernel assumes that TC0 is available, and will disable Priority Flow
+Control (PFC) on the device if TC0 is not available. To fix this, ensure TC0 is
+enabled when setting up DCB on your switch.
+
+Interrupt Rate Limiting
+-----------------------
+:Valid Range: 0-235 (0=no limit)
+
+The Intel(R) Ethernet Controller XL710 family supports an interrupt rate
+limiting mechanism. The user can control, via ethtool, the number of
+microseconds between interrupts.
+
+Syntax::
+
+ # ethtool -C ethX rx-usecs-high N
+
+The range of 0-235 microseconds provides an effective range of 4,310 to 250,000
+interrupts per second. The value of rx-usecs-high can be set independently of
+rx-usecs and tx-usecs in the same ethtool command, and is also independent of
+the adaptive interrupt moderation algorithm. The underlying hardware supports
+granularity in 4-microsecond intervals, so adjacent values may result in the
+same interrupt rate.
+
+One possible use case is the following::
+
+ # ethtool -C ethX adaptive-rx off adaptive-tx off rx-usecs-high 20 rx-usecs \
+ 5 tx-usecs 5
+
+The above command would disable adaptive interrupt moderation, and allow a
+maximum of 5 microseconds before indicating a receive or transmit was complete.
+However, instead of resulting in as many as 200,000 interrupts per second, it
+limits total interrupts per second to 50,000 via the rx-usecs-high parameter.
+
+Performance Optimization
+========================
+Driver defaults are meant to fit a wide variety of workloads, but if further
+optimization is required we recommend experimenting with the following settings.
+
+NOTE: For better performance when processing small (64B) frame sizes, try
+enabling Hyper threading in the BIOS in order to increase the number of logical
+cores in the system and subsequently increase the number of queues available to
+the adapter.
+
+Virtualized Environments
+------------------------
+1. Disable XPS on both ends by using the included virt_perf_default script
+or by running the following command as root::
+
+ for file in `ls /sys/class/net/<ethX>/queues/tx-*/xps_cpus`;
+ do echo 0 > $file; done
+
+2. Using the appropriate mechanism (vcpupin) in the vm, pin the cpu's to
+individual lcpu's, making sure to use a set of cpu's included in the
+device's local_cpulist: /sys/class/net/<ethX>/device/local_cpulist.
+
+3. Configure as many Rx/Tx queues in the VM as available. Do not rely on
+the default setting of 1.
+
+
+Non-virtualized Environments
+----------------------------
+Pin the adapter's IRQs to specific cores by disabling the irqbalance service
+and using the included set_irq_affinity script. Please see the script's help
+text for further options.
+
+- The following settings will distribute the IRQs across all the cores evenly::
+
+ # scripts/set_irq_affinity -x all <interface1> , [ <interface2>, ... ]
+
+- The following settings will distribute the IRQs across all the cores that are
+ local to the adapter (same NUMA node)::
+
+ # scripts/set_irq_affinity -x local <interface1> ,[ <interface2>, ... ]
+
+For very CPU intensive workloads, we recommend pinning the IRQs to all cores.
+
+For IP Forwarding: Disable Adaptive ITR and lower Rx and Tx interrupts per
+queue using ethtool.
+
+- Setting rx-usecs and tx-usecs to 125 will limit interrupts to about 8000
+ interrupts per second per queue.
+
+::
+
+ # ethtool -C <interface> adaptive-rx off adaptive-tx off rx-usecs 125 \
+ tx-usecs 125
+
+For lower CPU utilization: Disable Adaptive ITR and lower Rx and Tx interrupts
+per queue using ethtool.
+
+- Setting rx-usecs and tx-usecs to 250 will limit interrupts to about 4000
+ interrupts per second per queue.
+
+::
+
+ # ethtool -C <interface> adaptive-rx off adaptive-tx off rx-usecs 250 \
+ tx-usecs 250
+
+For lower latency: Disable Adaptive ITR and ITR by setting Rx and Tx to 0 using
+ethtool.
+
+::
+
+ # ethtool -C <interface> adaptive-rx off adaptive-tx off rx-usecs 0 \
+ tx-usecs 0
+
+Application Device Queues (ADq)
+-------------------------------
+Application Device Queues (ADq) allows you to dedicate one or more queues to a
+specific application. This can reduce latency for the specified application,
+and allow Tx traffic to be rate limited per application. Follow the steps below
+to set ADq.
+
+1. Create traffic classes (TCs). Maximum of 8 TCs can be created per interface.
+The shaper bw_rlimit parameter is optional.
+
+Example: Sets up two tcs, tc0 and tc1, with 16 queues each and max tx rate set
+to 1Gbit for tc0 and 3Gbit for tc1.
+
+::
+
+ # tc qdisc add dev <interface> root mqprio num_tc 2 map 0 0 0 0 1 1 1 1
+ queues 16@0 16@16 hw 1 mode channel shaper bw_rlimit min_rate 1Gbit 2Gbit
+ max_rate 1Gbit 3Gbit
+
+map: priority mapping for up to 16 priorities to tcs (e.g. map 0 0 0 0 1 1 1 1
+sets priorities 0-3 to use tc0 and 4-7 to use tc1)
+
+queues: for each tc, <num queues>@<offset> (e.g. queues 16@0 16@16 assigns
+16 queues to tc0 at offset 0 and 16 queues to tc1 at offset 16. Max total
+number of queues for all tcs is 64 or number of cores, whichever is lower.)
+
+hw 1 mode channel: ‘channel’ with ‘hw’ set to 1 is a new new hardware
+offload mode in mqprio that makes full use of the mqprio options, the
+TCs, the queue configurations, and the QoS parameters.
+
+shaper bw_rlimit: for each tc, sets minimum and maximum bandwidth rates.
+Totals must be equal or less than port speed.
+
+For example: min_rate 1Gbit 3Gbit: Verify bandwidth limit using network
+monitoring tools such as ifstat or sar –n DEV [interval] [number of samples]
+
+2. Enable HW TC offload on interface::
+
+ # ethtool -K <interface> hw-tc-offload on
+
+3. Apply TCs to ingress (RX) flow of interface::
+
+ # tc qdisc add dev <interface> ingress
+
+NOTES:
+ - Run all tc commands from the iproute2 <pathtoiproute2>/tc/ directory.
+ - ADq is not compatible with cloud filters.
+ - Setting up channels via ethtool (ethtool -L) is not supported when the
+ TCs are configured using mqprio.
+ - You must have iproute2 latest version
+ - NVM version 6.01 or later is required.
+ - ADq cannot be enabled when any the following features are enabled: Data
+ Center Bridging (DCB), Multiple Functions per Port (MFP), or Sideband
+ Filters.
+ - If another driver (for example, DPDK) has set cloud filters, you cannot
+ enable ADq.
+ - Tunnel filters are not supported in ADq. If encapsulated packets do
+ arrive in non-tunnel mode, filtering will be done on the inner headers.
+ For example, for VXLAN traffic in non-tunnel mode, PCTYPE is identified
+ as a VXLAN encapsulated packet, outer headers are ignored. Therefore,
+ inner headers are matched.
+ - If a TC filter on a PF matches traffic over a VF (on the PF), that
+ traffic will be routed to the appropriate queue of the PF, and will
+ not be passed on the VF. Such traffic will end up getting dropped higher
+ up in the TCP/IP stack as it does not match PF address data.
+ - If traffic matches multiple TC filters that point to different TCs,
+ that traffic will be duplicated and sent to all matching TC queues.
+ The hardware switch mirrors the packet to a VSI list when multiple
+ filters are matched.
+
+
+Known Issues/Troubleshooting
+============================
+
+NOTE: 1 Gb devices based on the Intel(R) Ethernet Network Connection X722 do
+not support the following features:
+
+ * Data Center Bridging (DCB)
+ * QOS
+ * VMQ
+ * SR-IOV
+ * Task Encapsulation offload (VXLAN, NVGRE)
+ * Energy Efficient Ethernet (EEE)
+ * Auto-media detect
+
+Unexpected Issues when the device driver and DPDK share a device
+----------------------------------------------------------------
+Unexpected issues may result when an i40e device is in multi driver mode and
+the kernel driver and DPDK driver are sharing the device. This is because
+access to the global NIC resources is not synchronized between multiple
+drivers. Any change to the global NIC configuration (writing to a global
+register, setting global configuration by AQ, or changing switch modes) will
+affect all ports and drivers on the device. Loading DPDK with the
+"multi-driver" module parameter may mitigate some of the issues.
+
+TC0 must be enabled when setting up DCB on a switch
+---------------------------------------------------
+The kernel assumes that TC0 is available, and will disable Priority Flow
+Control (PFC) on the device if TC0 is not available. To fix this, ensure TC0 is
+enabled when setting up DCB on your switch.
+
+
+Support
+=======
+For general information, go to the Intel support website at:
+
+https://www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+https://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on a supported kernel
+with a supported adapter, email the specific information related to the issue
+to e1000-devel@lists.sf.net.
diff --git a/Documentation/networking/i40e.txt b/Documentation/networking/i40e.txt
deleted file mode 100644
index c2d6e1824b29..000000000000
--- a/Documentation/networking/i40e.txt
+++ /dev/null
@@ -1,190 +0,0 @@
-Linux Base Driver for the Intel(R) Ethernet Controller XL710 Family
-===================================================================
-
-Intel i40e Linux driver.
-Copyright(c) 2013 Intel Corporation.
-
-Contents
-========
-
-- Identifying Your Adapter
-- Additional Configurations
-- Performance Tuning
-- Known Issues
-- Support
-
-
-Identifying Your Adapter
-========================
-
-The driver in this release is compatible with the Intel Ethernet
-Controller XL710 Family.
-
-For more information on how to identify your adapter, go to the Adapter &
-Driver ID Guide at:
-
- http://support.intel.com/support/network/sb/CS-012904.htm
-
-
-Enabling the driver
-===================
-
-The driver is enabled via the standard kernel configuration system,
-using the make command:
-
- make config/oldconfig/menuconfig/etc.
-
-The driver is located in the menu structure at:
-
- -> Device Drivers
- -> Network device support (NETDEVICES [=y])
- -> Ethernet driver support
- -> Intel devices
- -> Intel(R) Ethernet Controller XL710 Family
-
-Additional Configurations
-=========================
-
- Generic Receive Offload (GRO)
- -----------------------------
- The driver supports the in-kernel software implementation of GRO. GRO has
- shown that by coalescing Rx traffic into larger chunks of data, CPU
- utilization can be significantly reduced when under large Rx load. GRO is
- an evolution of the previously-used LRO interface. GRO is able to coalesce
- other protocols besides TCP. It's also safe to use with configurations that
- are problematic for LRO, namely bridging and iSCSI.
-
- Ethtool
- -------
- The driver utilizes the ethtool interface for driver configuration and
- diagnostics, as well as displaying statistical information. The latest
- ethtool version is required for this functionality.
-
- The latest release of ethtool can be found from
- https://www.kernel.org/pub/software/network/ethtool
-
-
- Flow Director n-ntuple traffic filters (FDir)
- ---------------------------------------------
- The driver utilizes the ethtool interface for configuring ntuple filters,
- via "ethtool -N <device> <filter>".
-
- The sctp4, ip4, udp4, and tcp4 flow types are supported with the standard
- fields including src-ip, dst-ip, src-port and dst-port. The driver only
- supports fully enabling or fully masking the fields, so use of the mask
- fields for partial matches is not supported.
-
- Additionally, the driver supports using the action to specify filters for a
- Virtual Function. You can specify the action as a 64bit value, where the
- lower 32 bits represents the queue number, while the next 8 bits represent
- which VF. Note that 0 is the PF, so the VF identifier is offset by 1. For
- example:
-
- ... action 0x800000002 ...
-
- Would indicate to direct traffic for Virtual Function 7 (8 minus 1) on queue
- 2 of that VF.
-
- The driver also supports using the user-defined field to specify 2 bytes of
- arbitrary data to match within the packet payload in addition to the regular
- fields. The data is specified in the lower 32bits of the user-def field in
- the following way:
-
- +----------------------------+---------------------------+
- | 31 28 24 20 16 | 15 12 8 4 0|
- +----------------------------+---------------------------+
- | offset into packet payload | 2 bytes of flexible data |
- +----------------------------+---------------------------+
-
- As an example,
-
- ... user-def 0x4FFFF ....
-
- means to match the value 0xFFFF 4 bytes into the packet payload. Note that
- the offset is based on the beginning of the payload, and not the beginning
- of the packet. Thus
-
- flow-type tcp4 ... user-def 0x8BEAF ....
-
- would match TCP/IPv4 packets which have the value 0xBEAF 8bytes into the
- TCP/IPv4 payload.
-
- For ICMP, the hardware parses the ICMP header as 4 bytes of header and 4
- bytes of payload, so if you want to match an ICMP frames payload you may need
- to add 4 to the offset in order to match the data.
-
- Furthermore, the offset can only be up to a value of 64, as the hardware
- will only read up to 64 bytes of data from the payload. It must also be even
- as the flexible data is 2 bytes long and must be aligned to byte 0 of the
- packet payload.
-
- When programming filters, the hardware is limited to using a single input
- set for each flow type. This means that it is an error to program two
- different filters with the same type that don't match on the same fields.
- Thus the second of the following two commands will fail:
-
- ethtool -N <device> flow-type tcp4 src-ip 192.168.0.7 action 5
- ethtool -N <device> flow-type tcp4 dst-ip 192.168.15.18 action 1
-
- This is because the first filter will be accepted and reprogram the input
- set for TCPv4 filters, but the second filter will be unable to reprogram the
- input set until all the conflicting TCPv4 filters are first removed.
-
- Note that the user-defined flexible offset is also considered part of the
- input set and cannot be programmed separately for multiple filters of the
- same type. However, the flexible data is not part of the input set and
- multiple filters may use the same offset but match against different data.
-
- Data Center Bridging (DCB)
- --------------------------
- DCB configuration is not currently supported.
-
- FCoE
- ----
- The driver supports Fiber Channel over Ethernet (FCoE) and Data Center
- Bridging (DCB) functionality. Configuring DCB and FCoE is outside the scope
- of this driver doc. Refer to http://www.open-fcoe.org/ for FCoE project
- information and http://www.open-lldp.org/ or email list
- e1000-eedc@lists.sourceforge.net for DCB information.
-
- MAC and VLAN anti-spoofing feature
- ----------------------------------
- When a malicious driver attempts to send a spoofed packet, it is dropped by
- the hardware and not transmitted. An interrupt is sent to the PF driver
- notifying it of the spoof attempt.
-
- When a spoofed packet is detected the PF driver will send the following
- message to the system log (displayed by the "dmesg" command):
-
- Spoof event(s) detected on VF (n)
-
- Where n=the VF that attempted to do the spoofing.
-
-
-Performance Tuning
-==================
-
-An excellent article on performance tuning can be found at:
-
-http://www.redhat.com/promo/summit/2008/downloads/pdf/Thursday/Mark_Wagner.pdf
-
-
-Known Issues
-============
-
-
-Support
-=======
-
-For general information, go to the Intel support website at:
-
- http://support.intel.com
-
-or the Intel Wired Networking project hosted by Sourceforge at:
-
- http://e1000.sourceforge.net
-
-If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related
-to the issue to e1000-devel@lists.sourceforge.net and copy
-netdev@vger.kernel.org.
diff --git a/Documentation/networking/i40evf.txt b/Documentation/networking/i40evf.txt
deleted file mode 100644
index e9b3035b95d0..000000000000
--- a/Documentation/networking/i40evf.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-Linux* Base Driver for Intel(R) Network Connection
-==================================================
-
-Intel Ethernet Adaptive Virtual Function Linux driver.
-Copyright(c) 2013-2017 Intel Corporation.
-
-Contents
-========
-
-- Identifying Your Adapter
-- Known Issues/Troubleshooting
-- Support
-
-This file describes the i40evf Linux* Base Driver.
-
-The i40evf driver supports the below mentioned virtual function
-devices and can only be activated on kernels running the i40e or
-newer Physical Function (PF) driver compiled with CONFIG_PCI_IOV.
-The i40evf driver requires CONFIG_PCI_MSI to be enabled.
-
-The guest OS loading the i40evf driver must support MSI-X interrupts.
-
-Supported Hardware
-==================
-Intel XL710 X710 Virtual Function
-Intel Ethernet Adaptive Virtual Function
-Intel X722 Virtual Function
-
-Identifying Your Adapter
-========================
-
-For more information on how to identify your adapter, go to the
-Adapter & Driver ID Guide at:
-
- http://support.intel.com/support/go/network/adapter/idguide.htm
-
-Known Issues/Troubleshooting
-============================
-
-
-Support
-=======
-
-For general information, go to the Intel support website at:
-
- http://support.intel.com
-
-or the Intel Wired Networking project hosted by Sourceforge at:
-
- http://sourceforge.net/projects/e1000
-
-If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related
-to the issue to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/iavf.rst b/Documentation/networking/iavf.rst
new file mode 100644
index 000000000000..f8b42b64eb28
--- /dev/null
+++ b/Documentation/networking/iavf.rst
@@ -0,0 +1,281 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Linux* Base Driver for Intel(R) Ethernet Adaptive Virtual Function
+==================================================================
+
+Intel Ethernet Adaptive Virtual Function Linux driver.
+Copyright(c) 2013-2018 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Additional Configurations
+- Known Issues/Troubleshooting
+- Support
+
+This file describes the iavf Linux* Base Driver. This driver was formerly
+called i40evf.
+
+The iavf driver supports the below mentioned virtual function devices and
+can only be activated on kernels running the i40e or newer Physical Function
+(PF) driver compiled with CONFIG_PCI_IOV. The iavf driver requires
+CONFIG_PCI_MSI to be enabled.
+
+The guest OS loading the iavf driver must support MSI-X interrupts.
+
+Identifying Your Adapter
+========================
+The driver in this kernel is compatible with devices based on the following:
+ * Intel(R) XL710 X710 Virtual Function
+ * Intel(R) X722 Virtual Function
+ * Intel(R) XXV710 Virtual Function
+ * Intel(R) Ethernet Adaptive Virtual Function
+
+For the best performance, make sure the latest NVM/FW is installed on your
+device.
+
+For information on how to identify your adapter, and for the latest NVM/FW
+images and Intel network drivers, refer to the Intel Support website:
+http://www.intel.com/support
+
+
+Additional Features and Configurations
+======================================
+
+Viewing Link Messages
+---------------------
+Link messages will not be displayed to the console if the distribution is
+restricting system messages. In order to see network driver link messages on
+your console, set dmesg to eight by entering the following::
+
+ dmesg -n 8
+
+NOTE: This setting is not saved across reboots.
+
+ethtool
+-------
+The driver utilizes the ethtool interface for driver configuration and
+diagnostics, as well as displaying statistical information. The latest ethtool
+version is required for this functionality. Download it at:
+https://www.kernel.org/pub/software/network/ethtool/
+
+Setting VLAN Tag Stripping
+--------------------------
+If you have applications that require Virtual Functions (VFs) to receive
+packets with VLAN tags, you can disable VLAN tag stripping for the VF. The
+Physical Function (PF) processes requests issued from the VF to enable or
+disable VLAN tag stripping. Note that if the PF has assigned a VLAN to a VF,
+then requests from that VF to set VLAN tag stripping will be ignored.
+
+To enable/disable VLAN tag stripping for a VF, issue the following command
+from inside the VM in which you are running the VF::
+
+ ethtool -K <if_name> rxvlan on/off
+
+or alternatively::
+
+ ethtool --offload <if_name> rxvlan on/off
+
+Adaptive Virtual Function
+-------------------------
+Adaptive Virtual Function (AVF) allows the virtual function driver, or VF, to
+adapt to changing feature sets of the physical function driver (PF) with which
+it is associated. This allows system administrators to update a PF without
+having to update all the VFs associated with it. All AVFs have a single common
+device ID and branding string.
+
+AVFs have a minimum set of features known as "base mode," but may provide
+additional features depending on what features are available in the PF with
+which the AVF is associated. The following are base mode features:
+
+- 4 Queue Pairs (QP) and associated Configuration Status Registers (CSRs)
+ for Tx/Rx.
+- i40e descriptors and ring format.
+- Descriptor write-back completion.
+- 1 control queue, with i40e descriptors, CSRs and ring format.
+- 5 MSI-X interrupt vectors and corresponding i40e CSRs.
+- 1 Interrupt Throttle Rate (ITR) index.
+- 1 Virtual Station Interface (VSI) per VF.
+- 1 Traffic Class (TC), TC0
+- Receive Side Scaling (RSS) with 64 entry indirection table and key,
+ configured through the PF.
+- 1 unicast MAC address reserved per VF.
+- 16 MAC address filters for each VF.
+- Stateless offloads - non-tunneled checksums.
+- AVF device ID.
+- HW mailbox is used for VF to PF communications (including on Windows).
+
+IEEE 802.1ad (QinQ) Support
+---------------------------
+The IEEE 802.1ad standard, informally known as QinQ, allows for multiple VLAN
+IDs within a single Ethernet frame. VLAN IDs are sometimes referred to as
+"tags," and multiple VLAN IDs are thus referred to as a "tag stack." Tag stacks
+allow L2 tunneling and the ability to segregate traffic within a particular
+VLAN ID, among other uses.
+
+The following are examples of how to configure 802.1ad (QinQ)::
+
+ ip link add link eth0 eth0.24 type vlan proto 802.1ad id 24
+ ip link add link eth0.24 eth0.24.371 type vlan proto 802.1Q id 371
+
+Where "24" and "371" are example VLAN IDs.
+
+NOTES:
+ Receive checksum offloads, cloud filters, and VLAN acceleration are not
+ supported for 802.1ad (QinQ) packets.
+
+Application Device Queues (ADq)
+-------------------------------
+Application Device Queues (ADq) allows you to dedicate one or more queues to a
+specific application. This can reduce latency for the specified application,
+and allow Tx traffic to be rate limited per application. Follow the steps below
+to set ADq.
+
+1. Create traffic classes (TCs). Maximum of 8 TCs can be created per interface.
+The shaper bw_rlimit parameter is optional.
+
+Example: Sets up two tcs, tc0 and tc1, with 16 queues each and max tx rate set
+to 1Gbit for tc0 and 3Gbit for tc1.
+
+::
+
+ # tc qdisc add dev <interface> root mqprio num_tc 2 map 0 0 0 0 1 1 1 1
+ queues 16@0 16@16 hw 1 mode channel shaper bw_rlimit min_rate 1Gbit 2Gbit
+ max_rate 1Gbit 3Gbit
+
+map: priority mapping for up to 16 priorities to tcs (e.g. map 0 0 0 0 1 1 1 1
+sets priorities 0-3 to use tc0 and 4-7 to use tc1)
+
+queues: for each tc, <num queues>@<offset> (e.g. queues 16@0 16@16 assigns
+16 queues to tc0 at offset 0 and 16 queues to tc1 at offset 16. Max total
+number of queues for all tcs is 64 or number of cores, whichever is lower.)
+
+hw 1 mode channel: ‘channel’ with ‘hw’ set to 1 is a new new hardware
+offload mode in mqprio that makes full use of the mqprio options, the
+TCs, the queue configurations, and the QoS parameters.
+
+shaper bw_rlimit: for each tc, sets minimum and maximum bandwidth rates.
+Totals must be equal or less than port speed.
+
+For example: min_rate 1Gbit 3Gbit: Verify bandwidth limit using network
+monitoring tools such as ifstat or sar –n DEV [interval] [number of samples]
+
+2. Enable HW TC offload on interface::
+
+ # ethtool -K <interface> hw-tc-offload on
+
+3. Apply TCs to ingress (RX) flow of interface::
+
+ # tc qdisc add dev <interface> ingress
+
+NOTES:
+ - Run all tc commands from the iproute2 <pathtoiproute2>/tc/ directory.
+ - ADq is not compatible with cloud filters.
+ - Setting up channels via ethtool (ethtool -L) is not supported when the TCs
+ are configured using mqprio.
+ - You must have iproute2 latest version
+ - NVM version 6.01 or later is required.
+ - ADq cannot be enabled when any the following features are enabled: Data
+ Center Bridging (DCB), Multiple Functions per Port (MFP), or Sideband Filters.
+ - If another driver (for example, DPDK) has set cloud filters, you cannot
+ enable ADq.
+ - Tunnel filters are not supported in ADq. If encapsulated packets do arrive
+ in non-tunnel mode, filtering will be done on the inner headers. For example,
+ for VXLAN traffic in non-tunnel mode, PCTYPE is identified as a VXLAN
+ encapsulated packet, outer headers are ignored. Therefore, inner headers are
+ matched.
+ - If a TC filter on a PF matches traffic over a VF (on the PF), that traffic
+ will be routed to the appropriate queue of the PF, and will not be passed on
+ the VF. Such traffic will end up getting dropped higher up in the TCP/IP
+ stack as it does not match PF address data.
+ - If traffic matches multiple TC filters that point to different TCs, that
+ traffic will be duplicated and sent to all matching TC queues. The hardware
+ switch mirrors the packet to a VSI list when multiple filters are matched.
+
+
+Known Issues/Troubleshooting
+============================
+
+Traffic Is Not Being Passed Between VM and Client
+-------------------------------------------------
+You may not be able to pass traffic between a client system and a
+Virtual Machine (VM) running on a separate host if the Virtual Function
+(VF, or Virtual NIC) is not in trusted mode and spoof checking is enabled
+on the VF. Note that this situation can occur in any combination of client,
+host, and guest operating system. For information on how to set the VF to
+trusted mode, refer to the section "VLAN Tag Packet Steering" in this
+readme document. For information on setting spoof checking, refer to the
+section "MAC and VLAN anti-spoofing feature" in this readme document.
+
+Do not unload port driver if VF with active VM is bound to it
+-------------------------------------------------------------
+Do not unload a port's driver if a Virtual Function (VF) with an active Virtual
+Machine (VM) is bound to it. Doing so will cause the port to appear to hang.
+Once the VM shuts down, or otherwise releases the VF, the command will complete.
+
+Virtual machine does not get link
+---------------------------------
+If the virtual machine has more than one virtual port assigned to it, and those
+virtual ports are bound to different physical ports, you may not get link on
+all of the virtual ports. The following command may work around the issue::
+
+ ethtool -r <PF>
+
+Where <PF> is the PF interface in the host, for example: p5p1. You may need to
+run the command more than once to get link on all virtual ports.
+
+MAC address of Virtual Function changes unexpectedly
+----------------------------------------------------
+If a Virtual Function's MAC address is not assigned in the host, then the VF
+(virtual function) driver will use a random MAC address. This random MAC
+address may change each time the VF driver is reloaded. You can assign a static
+MAC address in the host machine. This static MAC address will survive
+a VF driver reload.
+
+Driver Buffer Overflow Fix
+--------------------------
+The fix to resolve CVE-2016-8105, referenced in Intel SA-00069
+https://www.intel.com/content/www/us/en/security-center/advisory/intel-sa-00069.html
+is included in this and future versions of the driver.
+
+Multiple Interfaces on Same Ethernet Broadcast Network
+------------------------------------------------------
+Due to the default ARP behavior on Linux, it is not possible to have one system
+on two IP networks in the same Ethernet broadcast domain (non-partitioned
+switch) behave as expected. All Ethernet interfaces will respond to IP traffic
+for any IP address assigned to the system. This results in unbalanced receive
+traffic.
+
+If you have multiple interfaces in a server, either turn on ARP filtering by
+entering::
+
+ echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
+
+NOTE: This setting is not saved across reboots. The configuration change can be
+made permanent by adding the following line to the file /etc/sysctl.conf::
+
+ net.ipv4.conf.all.arp_filter = 1
+
+Another alternative is to install the interfaces in separate broadcast domains
+(either in different switches or in a switch partitioned to VLANs).
+
+Rx Page Allocation Errors
+-------------------------
+'Page allocation failure. order:0' errors may occur under stress.
+This is caused by the way the Linux kernel reports this stressed condition.
+
+
+Support
+=======
+For general information, go to the Intel support website at:
+
+https://support.intel.com
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+https://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on the supported kernel
+with a supported adapter, email the specific information related to the issue
+to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/ice.rst b/Documentation/networking/ice.rst
new file mode 100644
index 000000000000..1e4948c9e989
--- /dev/null
+++ b/Documentation/networking/ice.rst
@@ -0,0 +1,45 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Linux* Base Driver for the Intel(R) Ethernet Connection E800 Series
+===================================================================
+
+Intel ice Linux driver.
+Copyright(c) 2018 Intel Corporation.
+
+Contents
+========
+
+- Enabling the driver
+- Support
+
+The driver in this release supports Intel's E800 Series of products. For
+more information, visit Intel's support page at https://support.intel.com.
+
+Enabling the driver
+===================
+The driver is enabled via the standard kernel configuration system,
+using the make command::
+
+ make oldconfig/silentoldconfig/menuconfig/etc.
+
+The driver is located in the menu structure at:
+
+ -> Device Drivers
+ -> Network device support (NETDEVICES [=y])
+ -> Ethernet driver support
+ -> Intel devices
+ -> Intel(R) Ethernet Connection E800 Series Support
+
+Support
+=======
+For general information, go to the Intel support website at:
+
+https://www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+https://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on a supported kernel
+with a supported adapter, email the specific information related to the issue
+to e1000-devel@lists.sf.net.
diff --git a/Documentation/networking/ice.txt b/Documentation/networking/ice.txt
deleted file mode 100644
index 6261c46378e1..000000000000
--- a/Documentation/networking/ice.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Intel(R) Ethernet Connection E800 Series Linux Driver
-===================================================================
-
-Intel ice Linux driver.
-Copyright(c) 2018 Intel Corporation.
-
-Contents
-========
-- Enabling the driver
-- Support
-
-The driver in this release supports Intel's E800 Series of products. For
-more information, visit Intel's support page at http://support.intel.com.
-
-Enabling the driver
-===================
-
-The driver is enabled via the standard kernel configuration system,
-using the make command:
-
- Make oldconfig/silentoldconfig/menuconfig/etc.
-
-The driver is located in the menu structure at:
-
- -> Device Drivers
- -> Network device support (NETDEVICES [=y])
- -> Ethernet driver support
- -> Intel devices
- -> Intel(R) Ethernet Connection E800 Series Support
-
-Support
-=======
-
-For general information, go to the Intel support website at:
-
- http://support.intel.com
-
-If an issue is identified with the released source code, please email
-the maintainer listed in the MAINTAINERS file.
diff --git a/Documentation/networking/igb.rst b/Documentation/networking/igb.rst
new file mode 100644
index 000000000000..ba16b86d5593
--- /dev/null
+++ b/Documentation/networking/igb.rst
@@ -0,0 +1,193 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Linux* Base Driver for Intel(R) Ethernet Network Connection
+===========================================================
+
+Intel Gigabit Linux driver.
+Copyright(c) 1999-2018 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Command Line Parameters
+- Additional Configurations
+- Support
+
+
+Identifying Your Adapter
+========================
+For information on how to identify your adapter, and for the latest Intel
+network drivers, refer to the Intel Support website:
+http://www.intel.com/support
+
+
+Command Line Parameters
+========================
+If the driver is built as a module, the following optional parameters are used
+by entering them on the command line with the modprobe command using this
+syntax::
+
+ modprobe igb [<option>=<VAL1>,<VAL2>,...]
+
+There needs to be a <VAL#> for each network port in the system supported by
+this driver. The values will be applied to each instance, in function order.
+For example::
+
+ modprobe igb max_vfs=2,4
+
+In this case, there are two network ports supported by igb in the system.
+
+NOTE: A descriptor describes a data buffer and attributes related to the data
+buffer. This information is accessed by the hardware.
+
+max_vfs
+-------
+:Valid Range: 0-7
+
+This parameter adds support for SR-IOV. It causes the driver to spawn up to
+max_vfs worth of virtual functions. If the value is greater than 0 it will
+also force the VMDq parameter to be 1 or more.
+
+The parameters for the driver are referenced by position. Thus, if you have a
+dual port adapter, or more than one adapter in your system, and want N virtual
+functions per port, you must specify a number for each port with each parameter
+separated by a comma. For example::
+
+ modprobe igb max_vfs=4
+
+This will spawn 4 VFs on the first port.
+
+::
+
+ modprobe igb max_vfs=2,4
+
+This will spawn 2 VFs on the first port and 4 VFs on the second port.
+
+NOTE: Caution must be used in loading the driver with these parameters.
+Depending on your system configuration, number of slots, etc., it is impossible
+to predict in all cases where the positions would be on the command line.
+
+NOTE: Neither the device nor the driver control how VFs are mapped into config
+space. Bus layout will vary by operating system. On operating systems that
+support it, you can check sysfs to find the mapping.
+
+NOTE: When either SR-IOV mode or VMDq mode is enabled, hardware VLAN filtering
+and VLAN tag stripping/insertion will remain enabled. Please remove the old
+VLAN filter before the new VLAN filter is added. For example::
+
+ ip link set eth0 vf 0 vlan 100 // set vlan 100 for VF 0
+ ip link set eth0 vf 0 vlan 0 // Delete vlan 100
+ ip link set eth0 vf 0 vlan 200 // set a new vlan 200 for VF 0
+
+Debug
+-----
+:Valid Range: 0-16 (0=none,...,16=all)
+:Default Value: 0
+
+This parameter adjusts the level debug messages displayed in the system logs.
+
+
+Additional Features and Configurations
+======================================
+
+Jumbo Frames
+------------
+Jumbo Frames support is enabled by changing the Maximum Transmission Unit (MTU)
+to a value larger than the default value of 1500.
+
+Use the ifconfig command to increase the MTU size. For example, enter the
+following where <x> is the interface number::
+
+ ifconfig eth<x> mtu 9000 up
+
+Alternatively, you can use the ip command as follows::
+
+ ip link set mtu 9000 dev eth<x>
+ ip link set up dev eth<x>
+
+This setting is not saved across reboots. The setting change can be made
+permanent by adding 'MTU=9000' to the file:
+
+- For RHEL: /etc/sysconfig/network-scripts/ifcfg-eth<x>
+- For SLES: /etc/sysconfig/network/<config_file>
+
+NOTE: The maximum MTU setting for Jumbo Frames is 9216. This value coincides
+with the maximum Jumbo Frames size of 9234 bytes.
+
+NOTE: Using Jumbo frames at 10 or 100 Mbps is not supported and may result in
+poor performance or loss of link.
+
+
+ethtool
+-------
+The driver utilizes the ethtool interface for driver configuration and
+diagnostics, as well as displaying statistical information. The latest ethtool
+version is required for this functionality. Download it at:
+
+https://www.kernel.org/pub/software/network/ethtool/
+
+
+Enabling Wake on LAN* (WoL)
+---------------------------
+WoL is configured through the ethtool* utility.
+
+WoL will be enabled on the system during the next shut down or reboot. For
+this driver version, in order to enable WoL, the igb driver must be loaded
+prior to shutting down or suspending the system.
+
+NOTE: Wake on LAN is only supported on port A of multi-port devices. Also
+Wake On LAN is not supported for the following device:
+- Intel(R) Gigabit VT Quad Port Server Adapter
+
+
+Multiqueue
+----------
+In this mode, a separate MSI-X vector is allocated for each queue and one for
+"other" interrupts such as link status change and errors. All interrupts are
+throttled via interrupt moderation. Interrupt moderation must be used to avoid
+interrupt storms while the driver is processing one interrupt. The moderation
+value should be at least as large as the expected time for the driver to
+process an interrupt. Multiqueue is off by default.
+
+REQUIREMENTS: MSI-X support is required for Multiqueue. If MSI-X is not found,
+the system will fallback to MSI or to Legacy interrupts. This driver supports
+receive multiqueue on all kernels that support MSI-X.
+
+NOTE: On some kernels a reboot is required to switch between single queue mode
+and multiqueue mode or vice-versa.
+
+
+MAC and VLAN anti-spoofing feature
+----------------------------------
+When a malicious driver attempts to send a spoofed packet, it is dropped by the
+hardware and not transmitted.
+
+An interrupt is sent to the PF driver notifying it of the spoof attempt. When a
+spoofed packet is detected, the PF driver will send the following message to
+the system log (displayed by the "dmesg" command):
+Spoof event(s) detected on VF(n), where n = the VF that attempted to do the
+spoofing
+
+
+Setting MAC Address, VLAN and Rate Limit Using IProute2 Tool
+------------------------------------------------------------
+You can set a MAC address of a Virtual Function (VF), a default VLAN and the
+rate limit using the IProute2 tool. Download the latest version of the
+IProute2 tool from Sourceforge if your version does not have all the features
+you require.
+
+
+Support
+=======
+For general information, go to the Intel support website at:
+
+https://www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+https://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on a supported kernel
+with a supported adapter, email the specific information related to the issue
+to e1000-devel@lists.sf.net.
diff --git a/Documentation/networking/igb.txt b/Documentation/networking/igb.txt
deleted file mode 100644
index f90643ef39c9..000000000000
--- a/Documentation/networking/igb.txt
+++ /dev/null
@@ -1,129 +0,0 @@
-Linux* Base Driver for Intel(R) Ethernet Network Connection
-===========================================================
-
-Intel Gigabit Linux driver.
-Copyright(c) 1999 - 2013 Intel Corporation.
-
-Contents
-========
-
-- Identifying Your Adapter
-- Additional Configurations
-- Support
-
-Identifying Your Adapter
-========================
-
-This driver supports all 82575, 82576 and 82580-based Intel (R) gigabit network
-connections.
-
-For specific information on how to identify your adapter, go to the Adapter &
-Driver ID Guide at:
-
- http://support.intel.com/support/go/network/adapter/idguide.htm
-
-Command Line Parameters
-=======================
-
-The default value for each parameter is generally the recommended setting,
-unless otherwise noted.
-
-max_vfs
--------
-Valid Range: 0-7
-Default Value: 0
-
-This parameter adds support for SR-IOV. It causes the driver to spawn up to
-max_vfs worth of virtual function.
-
-Additional Configurations
-=========================
-
- Jumbo Frames
- ------------
- Jumbo Frames support is enabled by changing the MTU to a value larger than
- the default of 1500. Use the ip command to increase the MTU size.
- For example:
-
- ip link set dev eth<x> mtu 9000
-
- This setting is not saved across reboots.
-
- Notes:
-
- - The maximum MTU setting for Jumbo Frames is 9216. This value coincides
- with the maximum Jumbo Frames size of 9234 bytes.
-
- - Using Jumbo frames at 10 or 100 Mbps is not supported and may result in
- poor performance or loss of link.
-
- ethtool
- -------
- The driver utilizes the ethtool interface for driver configuration and
- diagnostics, as well as displaying statistical information. The latest
- version of ethtool can be found at:
-
- https://www.kernel.org/pub/software/network/ethtool/
-
- Enabling Wake on LAN* (WoL)
- ---------------------------
- WoL is configured through the ethtool* utility.
-
- For instructions on enabling WoL with ethtool, refer to the ethtool man page.
-
- WoL will be enabled on the system during the next shut down or reboot.
- For this driver version, in order to enable WoL, the igb driver must be
- loaded when shutting down or rebooting the system.
-
- Wake On LAN is only supported on port A of multi-port adapters.
-
- Wake On LAN is not supported for the Intel(R) Gigabit VT Quad Port Server
- Adapter.
-
- Multiqueue
- ----------
- In this mode, a separate MSI-X vector is allocated for each queue and one
- for "other" interrupts such as link status change and errors. All
- interrupts are throttled via interrupt moderation. Interrupt moderation
- must be used to avoid interrupt storms while the driver is processing one
- interrupt. The moderation value should be at least as large as the expected
- time for the driver to process an interrupt. Multiqueue is off by default.
-
- REQUIREMENTS: MSI-X support is required for Multiqueue. If MSI-X is not
- found, the system will fallback to MSI or to Legacy interrupts.
-
- MAC and VLAN anti-spoofing feature
- ----------------------------------
- When a malicious driver attempts to send a spoofed packet, it is dropped by
- the hardware and not transmitted. An interrupt is sent to the PF driver
- notifying it of the spoof attempt.
-
- When a spoofed packet is detected the PF driver will send the following
- message to the system log (displayed by the "dmesg" command):
-
- Spoof event(s) detected on VF(n)
-
- Where n=the VF that attempted to do the spoofing.
-
- Setting MAC Address, VLAN and Rate Limit Using IProute2 Tool
- ------------------------------------------------------------
- You can set a MAC address of a Virtual Function (VF), a default VLAN and the
- rate limit using the IProute2 tool. Download the latest version of the
- iproute2 tool from Sourceforge if your version does not have all the
- features you require.
-
-
-Support
-=======
-
-For general information, go to the Intel support website at:
-
- www.intel.com/support/
-
-or the Intel Wired Networking project hosted by Sourceforge at:
-
- http://sourceforge.net/projects/e1000
-
-If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related
-to the issue to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/igbvf.rst b/Documentation/networking/igbvf.rst
new file mode 100644
index 000000000000..a8a9ffa4f8d3
--- /dev/null
+++ b/Documentation/networking/igbvf.rst
@@ -0,0 +1,64 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Linux* Base Virtual Function Driver for Intel(R) 1G Ethernet
+============================================================
+
+Intel Gigabit Virtual Function Linux driver.
+Copyright(c) 1999-2018 Intel Corporation.
+
+Contents
+========
+- Identifying Your Adapter
+- Additional Configurations
+- Support
+
+This driver supports Intel 82576-based virtual function devices-based virtual
+function devices that can only be activated on kernels that support SR-IOV.
+
+SR-IOV requires the correct platform and OS support.
+
+The guest OS loading this driver must support MSI-X interrupts.
+
+For questions related to hardware requirements, refer to the documentation
+supplied with your Intel adapter. All hardware requirements listed apply to use
+with Linux.
+
+Driver information can be obtained using ethtool, lspci, and ifconfig.
+Instructions on updating ethtool can be found in the section Additional
+Configurations later in this document.
+
+NOTE: There is a limit of a total of 32 shared VLANs to 1 or more VFs.
+
+
+Identifying Your Adapter
+========================
+For information on how to identify your adapter, and for the latest Intel
+network drivers, refer to the Intel Support website:
+http://www.intel.com/support
+
+
+Additional Features and Configurations
+======================================
+
+ethtool
+-------
+The driver utilizes the ethtool interface for driver configuration and
+diagnostics, as well as displaying statistical information. The latest ethtool
+version is required for this functionality. Download it at:
+
+https://www.kernel.org/pub/software/network/ethtool/
+
+
+Support
+=======
+For general information, go to the Intel support website at:
+
+https://www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+https://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on a supported kernel
+with a supported adapter, email the specific information related to the issue
+to e1000-devel@lists.sf.net.
diff --git a/Documentation/networking/igbvf.txt b/Documentation/networking/igbvf.txt
deleted file mode 100644
index bd404735fb46..000000000000
--- a/Documentation/networking/igbvf.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-Linux* Base Driver for Intel(R) Ethernet Network Connection
-===========================================================
-
-Intel Gigabit Linux driver.
-Copyright(c) 1999 - 2013 Intel Corporation.
-
-Contents
-========
-
-- Identifying Your Adapter
-- Additional Configurations
-- Support
-
-This file describes the igbvf Linux* Base Driver for Intel Network Connection.
-
-The igbvf driver supports 82576-based virtual function devices that can only
-be activated on kernels that support SR-IOV. SR-IOV requires the correct
-platform and OS support.
-
-The igbvf driver requires the igb driver, version 2.0 or later. The igbvf
-driver supports virtual functions generated by the igb driver with a max_vfs
-value of 1 or greater. For more information on the max_vfs parameter refer
-to the README included with the igb driver.
-
-The guest OS loading the igbvf driver must support MSI-X interrupts.
-
-This driver is only supported as a loadable module at this time. Intel is
-not supplying patches against the kernel source to allow for static linking
-of the driver. For questions related to hardware requirements, refer to the
-documentation supplied with your Intel Gigabit adapter. All hardware
-requirements listed apply to use with Linux.
-
-Instructions on updating ethtool can be found in the section "Additional
-Configurations" later in this document.
-
-VLANs: There is a limit of a total of 32 shared VLANs to 1 or more VFs.
-
-Identifying Your Adapter
-========================
-
-The igbvf driver supports 82576-based virtual function devices that can only
-be activated on kernels that support SR-IOV.
-
-For more information on how to identify your adapter, go to the Adapter &
-Driver ID Guide at:
-
- http://support.intel.com/support/go/network/adapter/idguide.htm
-
-For the latest Intel network drivers for Linux, refer to the following
-website. In the search field, enter your adapter name or type, or use the
-networking link on the left to search for your adapter:
-
- http://downloadcenter.intel.com/scripts-df-external/Support_Intel.aspx
-
-Additional Configurations
-=========================
-
- ethtool
- -------
- The driver utilizes the ethtool interface for driver configuration and
- diagnostics, as well as displaying statistical information. The ethtool
- version 3.0 or later is required for this functionality, although we
- strongly recommend downloading the latest version at:
-
- https://www.kernel.org/pub/software/network/ethtool/
-
-Support
-=======
-
-For general information, go to the Intel support website at:
-
- http://support.intel.com
-
-or the Intel Wired Networking project hosted by Sourceforge at:
-
- http://sourceforge.net/projects/e1000
-
-If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related
-to the issue to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst
index fcd710f2cc7a..bd89dae8d578 100644
--- a/Documentation/networking/index.rst
+++ b/Documentation/networking/index.rst
@@ -14,6 +14,16 @@ Contents:
dpaa2/index
e100
e1000
+ e1000e
+ fm10k
+ igb
+ igbvf
+ ixgb
+ ixgbe
+ ixgbevf
+ i40e
+ iavf
+ ice
kapi
z8530book
msg_zerocopy
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 8313a636dd53..32b21571adfe 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -316,6 +316,17 @@ tcp_frto - INTEGER
By default it's enabled with a non-zero value. 0 disables F-RTO.
+tcp_fwmark_accept - BOOLEAN
+ If set, incoming connections to listening sockets that do not have a
+ socket mark will set the mark of the accepting socket to the fwmark of
+ the incoming SYN packet. This will cause all packets on that connection
+ (starting from the first SYNACK) to be sent with that fwmark. The
+ listening socket's mark is unchanged. Listening sockets that already
+ have a fwmark set via setsockopt(SOL_SOCKET, SO_MARK, ...) are
+ unaffected.
+
+ Default: 0
+
tcp_invalid_ratelimit - INTEGER
Limit the maximal rate for sending duplicate acknowledgments
in response to incoming TCP packets that are for an existing
@@ -425,7 +436,7 @@ tcp_mtu_probing - INTEGER
1 - Disabled by default, enabled when an ICMP black hole detected
2 - Always enabled, use initial MSS of tcp_base_mss.
-tcp_probe_interval - INTEGER
+tcp_probe_interval - UNSIGNED INTEGER
Controls how often to start TCP Packetization-Layer Path MTU
Discovery reprobe. The default is reprobing every 10 minutes as
per RFC4821.
@@ -1442,6 +1453,14 @@ max_hbh_length - INTEGER
header.
Default: INT_MAX (unlimited)
+skip_notify_on_dev_down - BOOLEAN
+ Controls whether an RTM_DELROUTE message is generated for routes
+ removed when a device is taken down or deleted. IPv4 does not
+ generate this message; IPv6 does by default. Setting this sysctl
+ to true skips the message, making IPv4 and IPv6 on par in relying
+ on userspace caches to track link events and evict routes.
+ Default: false (generate message)
+
IPv6 Fragmentation:
ip6frag_high_thresh - INTEGER
diff --git a/Documentation/networking/ixgb.rst b/Documentation/networking/ixgb.rst
new file mode 100644
index 000000000000..8bd80e27843d
--- /dev/null
+++ b/Documentation/networking/ixgb.rst
@@ -0,0 +1,467 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Linux Base Driver for 10 Gigabit Intel(R) Ethernet Network Connection
+=====================================================================
+
+October 1, 2018
+
+
+Contents
+========
+
+- In This Release
+- Identifying Your Adapter
+- Command Line Parameters
+- Improving Performance
+- Additional Configurations
+- Known Issues/Troubleshooting
+- Support
+
+
+
+In This Release
+===============
+
+This file describes the ixgb Linux Base Driver for the 10 Gigabit Intel(R)
+Network Connection. This driver includes support for Itanium(R)2-based
+systems.
+
+For questions related to hardware requirements, refer to the documentation
+supplied with your 10 Gigabit adapter. All hardware requirements listed apply
+to use with Linux.
+
+The following features are available in this kernel:
+ - Native VLANs
+ - Channel Bonding (teaming)
+ - SNMP
+
+Channel Bonding documentation can be found in the Linux kernel source:
+/Documentation/networking/bonding.txt
+
+The driver information previously displayed in the /proc filesystem is not
+supported in this release. Alternatively, you can use ethtool (version 1.6
+or later), lspci, and iproute2 to obtain the same information.
+
+Instructions on updating ethtool can be found in the section "Additional
+Configurations" later in this document.
+
+
+Identifying Your Adapter
+========================
+
+The following Intel network adapters are compatible with the drivers in this
+release:
+
++------------+------------------------------+----------------------------------+
+| Controller | Adapter Name | Physical Layer |
++============+==============================+==================================+
+| 82597EX | Intel(R) PRO/10GbE LR/SR/CX4 | - 10G Base-LR (fiber) |
+| | Server Adapters | - 10G Base-SR (fiber) |
+| | | - 10G Base-CX4 (copper) |
++------------+------------------------------+----------------------------------+
+
+For more information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
+
+ https://support.intel.com
+
+
+Command Line Parameters
+=======================
+
+If the driver is built as a module, the following optional parameters are
+used by entering them on the command line with the modprobe command using
+this syntax::
+
+ modprobe ixgb [<option>=<VAL1>,<VAL2>,...]
+
+For example, with two 10GbE PCI adapters, entering::
+
+ modprobe ixgb TxDescriptors=80,128
+
+loads the ixgb driver with 80 TX resources for the first adapter and 128 TX
+resources for the second adapter.
+
+The default value for each parameter is generally the recommended setting,
+unless otherwise noted.
+
+Copybreak
+---------
+:Valid Range: 0-XXXX
+:Default Value: 256
+
+ This is the maximum size of packet that is copied to a new buffer on
+ receive.
+
+Debug
+-----
+:Valid Range: 0-16 (0=none,...,16=all)
+:Default Value: 0
+
+ This parameter adjusts the level of debug messages displayed in the
+ system logs.
+
+FlowControl
+-----------
+:Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
+:Default Value: 1 if no EEPROM, otherwise read from EEPROM
+
+ This parameter controls the automatic generation(Tx) and response(Rx) to
+ Ethernet PAUSE frames. There are hardware bugs associated with enabling
+ Tx flow control so beware.
+
+RxDescriptors
+-------------
+:Valid Range: 64-4096
+:Default Value: 1024
+
+ This value is the number of receive descriptors allocated by the driver.
+ Increasing this value allows the driver to buffer more incoming packets.
+ Each descriptor is 16 bytes. A receive buffer is also allocated for
+ each descriptor and can be either 2048, 4056, 8192, or 16384 bytes,
+ depending on the MTU setting. When the MTU size is 1500 or less, the
+ receive buffer size is 2048 bytes. When the MTU is greater than 1500 the
+ receive buffer size will be either 4056, 8192, or 16384 bytes. The
+ maximum MTU size is 16114.
+
+TxDescriptors
+-------------
+:Valid Range: 64-4096
+:Default Value: 256
+
+ This value is the number of transmit descriptors allocated by the driver.
+ Increasing this value allows the driver to queue more transmits. Each
+ descriptor is 16 bytes.
+
+RxIntDelay
+----------
+:Valid Range: 0-65535 (0=off)
+:Default Value: 72
+
+ This value delays the generation of receive interrupts in units of
+ 0.8192 microseconds. Receive interrupt reduction can improve CPU
+ efficiency if properly tuned for specific network traffic. Increasing
+ this value adds extra latency to frame reception and can end up
+ decreasing the throughput of TCP traffic. If the system is reporting
+ dropped receives, this value may be set too high, causing the driver to
+ run out of available receive descriptors.
+
+TxIntDelay
+----------
+:Valid Range: 0-65535 (0=off)
+:Default Value: 32
+
+ This value delays the generation of transmit interrupts in units of
+ 0.8192 microseconds. Transmit interrupt reduction can improve CPU
+ efficiency if properly tuned for specific network traffic. Increasing
+ this value adds extra latency to frame transmission and can end up
+ decreasing the throughput of TCP traffic. If this value is set too high,
+ it will cause the driver to run out of available transmit descriptors.
+
+XsumRX
+------
+:Valid Range: 0-1
+:Default Value: 1
+
+ A value of '1' indicates that the driver should enable IP checksum
+ offload for received packets (both UDP and TCP) to the adapter hardware.
+
+RxFCHighThresh
+--------------
+:Valid Range: 1,536-262,136 (0x600 - 0x3FFF8, 8 byte granularity)
+:Default Value: 196,608 (0x30000)
+
+ Receive Flow control high threshold (when we send a pause frame)
+
+RxFCLowThresh
+-------------
+:Valid Range: 64-262,136 (0x40 - 0x3FFF8, 8 byte granularity)
+:Default Value: 163,840 (0x28000)
+
+ Receive Flow control low threshold (when we send a resume frame)
+
+FCReqTimeout
+------------
+:Valid Range: 1-65535
+:Default Value: 65535
+
+ Flow control request timeout (how long to pause the link partner's tx)
+
+IntDelayEnable
+--------------
+:Value Range: 0,1
+:Default Value: 1
+
+ Interrupt Delay, 0 disables transmit interrupt delay and 1 enables it.
+
+
+Improving Performance
+=====================
+
+With the 10 Gigabit server adapters, the default Linux configuration will
+very likely limit the total available throughput artificially. There is a set
+of configuration changes that, when applied together, will increase the ability
+of Linux to transmit and receive data. The following enhancements were
+originally acquired from settings published at http://www.spec.org/web99/ for
+various submitted results using Linux.
+
+NOTE:
+ These changes are only suggestions, and serve as a starting point for
+ tuning your network performance.
+
+The changes are made in three major ways, listed in order of greatest effect:
+
+- Use ip link to modify the mtu (maximum transmission unit) and the txqueuelen
+ parameter.
+- Use sysctl to modify /proc parameters (essentially kernel tuning)
+- Use setpci to modify the MMRBC field in PCI-X configuration space to increase
+ transmit burst lengths on the bus.
+
+NOTE:
+ setpci modifies the adapter's configuration registers to allow it to read
+ up to 4k bytes at a time (for transmits). However, for some systems the
+ behavior after modifying this register may be undefined (possibly errors of
+ some kind). A power-cycle, hard reset or explicitly setting the e6 register
+ back to 22 (setpci -d 8086:1a48 e6.b=22) may be required to get back to a
+ stable configuration.
+
+- COPY these lines and paste them into ixgb_perf.sh:
+
+::
+
+ #!/bin/bash
+ echo "configuring network performance , edit this file to change the interface
+ or device ID of 10GbE card"
+ # set mmrbc to 4k reads, modify only Intel 10GbE device IDs
+ # replace 1a48 with appropriate 10GbE device's ID installed on the system,
+ # if needed.
+ setpci -d 8086:1a48 e6.b=2e
+ # set the MTU (max transmission unit) - it requires your switch and clients
+ # to change as well.
+ # set the txqueuelen
+ # your ixgb adapter should be loaded as eth1 for this to work, change if needed
+ ip li set dev eth1 mtu 9000 txqueuelen 1000 up
+ # call the sysctl utility to modify /proc/sys entries
+ sysctl -p ./sysctl_ixgb.conf
+
+- COPY these lines and paste them into sysctl_ixgb.conf:
+
+::
+
+ # some of the defaults may be different for your kernel
+ # call this file with sysctl -p <this file>
+ # these are just suggested values that worked well to increase throughput in
+ # several network benchmark tests, your mileage may vary
+
+ ### IPV4 specific settings
+ # turn TCP timestamp support off, default 1, reduces CPU use
+ net.ipv4.tcp_timestamps = 0
+ # turn SACK support off, default on
+ # on systems with a VERY fast bus -> memory interface this is the big gainer
+ net.ipv4.tcp_sack = 0
+ # set min/default/max TCP read buffer, default 4096 87380 174760
+ net.ipv4.tcp_rmem = 10000000 10000000 10000000
+ # set min/pressure/max TCP write buffer, default 4096 16384 131072
+ net.ipv4.tcp_wmem = 10000000 10000000 10000000
+ # set min/pressure/max TCP buffer space, default 31744 32256 32768
+ net.ipv4.tcp_mem = 10000000 10000000 10000000
+
+ ### CORE settings (mostly for socket and UDP effect)
+ # set maximum receive socket buffer size, default 131071
+ net.core.rmem_max = 524287
+ # set maximum send socket buffer size, default 131071
+ net.core.wmem_max = 524287
+ # set default receive socket buffer size, default 65535
+ net.core.rmem_default = 524287
+ # set default send socket buffer size, default 65535
+ net.core.wmem_default = 524287
+ # set maximum amount of option memory buffers, default 10240
+ net.core.optmem_max = 524287
+ # set number of unprocessed input packets before kernel starts dropping them; default 300
+ net.core.netdev_max_backlog = 300000
+
+Edit the ixgb_perf.sh script if necessary to change eth1 to whatever interface
+your ixgb driver is using and/or replace '1a48' with appropriate 10GbE device's
+ID installed on the system.
+
+NOTE:
+ Unless these scripts are added to the boot process, these changes will
+ only last only until the next system reboot.
+
+
+Resolving Slow UDP Traffic
+--------------------------
+If your server does not seem to be able to receive UDP traffic as fast as it
+can receive TCP traffic, it could be because Linux, by default, does not set
+the network stack buffers as large as they need to be to support high UDP
+transfer rates. One way to alleviate this problem is to allow more memory to
+be used by the IP stack to store incoming data.
+
+For instance, use the commands::
+
+ sysctl -w net.core.rmem_max=262143
+
+and::
+
+ sysctl -w net.core.rmem_default=262143
+
+to increase the read buffer memory max and default to 262143 (256k - 1) from
+defaults of max=131071 (128k - 1) and default=65535 (64k - 1). These variables
+will increase the amount of memory used by the network stack for receives, and
+can be increased significantly more if necessary for your application.
+
+
+Additional Configurations
+=========================
+
+Configuring the Driver on Different Distributions
+-------------------------------------------------
+Configuring a network driver to load properly when the system is started is
+distribution dependent. Typically, the configuration process involves adding
+an alias line to /etc/modprobe.conf as well as editing other system startup
+scripts and/or configuration files. Many popular Linux distributions ship
+with tools to make these changes for you. To learn the proper way to
+configure a network device for your system, refer to your distribution
+documentation. If during this process you are asked for the driver or module
+name, the name for the Linux Base Driver for the Intel 10GbE Family of
+Adapters is ixgb.
+
+Viewing Link Messages
+---------------------
+Link messages will not be displayed to the console if the distribution is
+restricting system messages. In order to see network driver link messages on
+your console, set dmesg to eight by entering the following::
+
+ dmesg -n 8
+
+NOTE: This setting is not saved across reboots.
+
+Jumbo Frames
+------------
+The driver supports Jumbo Frames for all adapters. Jumbo Frames support is
+enabled by changing the MTU to a value larger than the default of 1500.
+The maximum value for the MTU is 16114. Use the ip command to
+increase the MTU size. For example::
+
+ ip li set dev ethx mtu 9000
+
+The maximum MTU setting for Jumbo Frames is 16114. This value coincides
+with the maximum Jumbo Frames size of 16128.
+
+Ethtool
+-------
+The driver utilizes the ethtool interface for driver configuration and
+diagnostics, as well as displaying statistical information. The ethtool
+version 1.6 or later is required for this functionality.
+
+The latest release of ethtool can be found from
+https://www.kernel.org/pub/software/network/ethtool/
+
+NOTE:
+ The ethtool version 1.6 only supports a limited set of ethtool options.
+ Support for a more complete ethtool feature set can be enabled by
+ upgrading to the latest version.
+
+NAPI
+----
+NAPI (Rx polling mode) is supported in the ixgb driver.
+
+See https://wiki.linuxfoundation.org/networking/napi for more information on
+NAPI.
+
+
+Known Issues/Troubleshooting
+============================
+
+NOTE:
+ After installing the driver, if your Intel Network Connection is not
+ working, verify in the "In This Release" section of the readme that you have
+ installed the correct driver.
+
+Cable Interoperability Issue with Fujitsu XENPAK Module in SmartBits Chassis
+----------------------------------------------------------------------------
+Excessive CRC errors may be observed if the Intel(R) PRO/10GbE CX4
+Server adapter is connected to a Fujitsu XENPAK CX4 module in a SmartBits
+chassis using 15 m/24AWG cable assemblies manufactured by Fujitsu or Leoni.
+The CRC errors may be received either by the Intel(R) PRO/10GbE CX4
+Server adapter or the SmartBits. If this situation occurs using a different
+cable assembly may resolve the issue.
+
+Cable Interoperability Issues with HP Procurve 3400cl Switch Port
+-----------------------------------------------------------------
+Excessive CRC errors may be observed if the Intel(R) PRO/10GbE CX4 Server
+adapter is connected to an HP Procurve 3400cl switch port using short cables
+(1 m or shorter). If this situation occurs, using a longer cable may resolve
+the issue.
+
+Excessive CRC errors may be observed using Fujitsu 24AWG cable assemblies that
+Are 10 m or longer or where using a Leoni 15 m/24AWG cable assembly. The CRC
+errors may be received either by the CX4 Server adapter or at the switch. If
+this situation occurs, using a different cable assembly may resolve the issue.
+
+Jumbo Frames System Requirement
+-------------------------------
+Memory allocation failures have been observed on Linux systems with 64 MB
+of RAM or less that are running Jumbo Frames. If you are using Jumbo
+Frames, your system may require more than the advertised minimum
+requirement of 64 MB of system memory.
+
+Performance Degradation with Jumbo Frames
+-----------------------------------------
+Degradation in throughput performance may be observed in some Jumbo frames
+environments. If this is observed, increasing the application's socket buffer
+size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
+See the specific application manual and /usr/src/linux*/Documentation/
+networking/ip-sysctl.txt for more details.
+
+Allocating Rx Buffers when Using Jumbo Frames
+---------------------------------------------
+Allocating Rx buffers when using Jumbo Frames on 2.6.x kernels may fail if
+the available memory is heavily fragmented. This issue may be seen with PCI-X
+adapters or with packet split disabled. This can be reduced or eliminated
+by changing the amount of available memory for receive buffer allocation, by
+increasing /proc/sys/vm/min_free_kbytes.
+
+Multiple Interfaces on Same Ethernet Broadcast Network
+------------------------------------------------------
+Due to the default ARP behavior on Linux, it is not possible to have
+one system on two IP networks in the same Ethernet broadcast domain
+(non-partitioned switch) behave as expected. All Ethernet interfaces
+will respond to IP traffic for any IP address assigned to the system.
+This results in unbalanced receive traffic.
+
+If you have multiple interfaces in a server, do either of the following:
+
+ - Turn on ARP filtering by entering::
+
+ echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
+
+ - Install the interfaces in separate broadcast domains - either in
+ different switches or in a switch partitioned to VLANs.
+
+UDP Stress Test Dropped Packet Issue
+--------------------------------------
+Under small packets UDP stress test with 10GbE driver, the Linux system
+may drop UDP packets due to the fullness of socket buffers. You may want
+to change the driver's Flow Control variables to the minimum value for
+controlling packet reception.
+
+Tx Hangs Possible Under Stress
+------------------------------
+Under stress conditions, if TX hangs occur, turning off TSO
+"ethtool -K eth0 tso off" may resolve the problem.
+
+
+Support
+=======
+For general information, go to the Intel support website at:
+
+https://www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+https://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on a supported kernel
+with a supported adapter, email the specific information related to the issue
+to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/ixgb.txt b/Documentation/networking/ixgb.txt
deleted file mode 100644
index 09f71d71920a..000000000000
--- a/Documentation/networking/ixgb.txt
+++ /dev/null
@@ -1,433 +0,0 @@
-Linux Base Driver for 10 Gigabit Intel(R) Ethernet Network Connection
-=====================================================================
-
-March 14, 2011
-
-
-Contents
-========
-
-- In This Release
-- Identifying Your Adapter
-- Building and Installation
-- Command Line Parameters
-- Improving Performance
-- Additional Configurations
-- Known Issues/Troubleshooting
-- Support
-
-
-
-In This Release
-===============
-
-This file describes the ixgb Linux Base Driver for the 10 Gigabit Intel(R)
-Network Connection. This driver includes support for Itanium(R)2-based
-systems.
-
-For questions related to hardware requirements, refer to the documentation
-supplied with your 10 Gigabit adapter. All hardware requirements listed apply
-to use with Linux.
-
-The following features are available in this kernel:
- - Native VLANs
- - Channel Bonding (teaming)
- - SNMP
-
-Channel Bonding documentation can be found in the Linux kernel source:
-/Documentation/networking/bonding.txt
-
-The driver information previously displayed in the /proc filesystem is not
-supported in this release. Alternatively, you can use ethtool (version 1.6
-or later), lspci, and iproute2 to obtain the same information.
-
-Instructions on updating ethtool can be found in the section "Additional
-Configurations" later in this document.
-
-
-Identifying Your Adapter
-========================
-
-The following Intel network adapters are compatible with the drivers in this
-release:
-
-Controller Adapter Name Physical Layer
----------- ------------ --------------
-82597EX Intel(R) PRO/10GbE LR/SR/CX4 10G Base-LR (1310 nm optical fiber)
- Server Adapters 10G Base-SR (850 nm optical fiber)
- 10G Base-CX4(twin-axial copper cabling)
-
-For more information on how to identify your adapter, go to the Adapter &
-Driver ID Guide at:
-
- http://support.intel.com/support/network/sb/CS-012904.htm
-
-
-Building and Installation
-=========================
-
-select m for "Intel(R) PRO/10GbE support" located at:
- Location:
- -> Device Drivers
- -> Network device support (NETDEVICES [=y])
- -> Ethernet (10000 Mbit) (NETDEV_10000 [=y])
-1. make modules && make modules_install
-
-2. Load the module:
-
-    modprobe ixgb <parameter>=<value>
-
- The insmod command can be used if the full
- path to the driver module is specified. For example:
-
- insmod /lib/modules/<KERNEL VERSION>/kernel/drivers/net/ixgb/ixgb.ko
-
- With 2.6 based kernels also make sure that older ixgb drivers are
- removed from the kernel, before loading the new module:
-
- rmmod ixgb; modprobe ixgb
-
-3. Assign an IP address to the interface by entering the following, where
- x is the interface number:
-
- ip addr add ethx <IP_address>
-
-4. Verify that the interface works. Enter the following, where <IP_address>
- is the IP address for another machine on the same subnet as the interface
- that is being tested:
-
- ping <IP_address>
-
-
-Command Line Parameters
-=======================
-
-If the driver is built as a module, the following optional parameters are
-used by entering them on the command line with the modprobe command using
-this syntax:
-
- modprobe ixgb [<option>=<VAL1>,<VAL2>,...]
-
-For example, with two 10GbE PCI adapters, entering:
-
- modprobe ixgb TxDescriptors=80,128
-
-loads the ixgb driver with 80 TX resources for the first adapter and 128 TX
-resources for the second adapter.
-
-The default value for each parameter is generally the recommended setting,
-unless otherwise noted.
-
-FlowControl
-Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
-Default: Read from the EEPROM
- If EEPROM is not detected, default is 1
- This parameter controls the automatic generation(Tx) and response(Rx) to
- Ethernet PAUSE frames. There are hardware bugs associated with enabling
- Tx flow control so beware.
-
-RxDescriptors
-Valid Range: 64-512
-Default Value: 512
- This value is the number of receive descriptors allocated by the driver.
- Increasing this value allows the driver to buffer more incoming packets.
- Each descriptor is 16 bytes. A receive buffer is also allocated for
- each descriptor and can be either 2048, 4056, 8192, or 16384 bytes,
- depending on the MTU setting. When the MTU size is 1500 or less, the
- receive buffer size is 2048 bytes. When the MTU is greater than 1500 the
- receive buffer size will be either 4056, 8192, or 16384 bytes. The
- maximum MTU size is 16114.
-
-RxIntDelay
-Valid Range: 0-65535 (0=off)
-Default Value: 72
- This value delays the generation of receive interrupts in units of
- 0.8192 microseconds. Receive interrupt reduction can improve CPU
- efficiency if properly tuned for specific network traffic. Increasing
- this value adds extra latency to frame reception and can end up
- decreasing the throughput of TCP traffic. If the system is reporting
- dropped receives, this value may be set too high, causing the driver to
- run out of available receive descriptors.
-
-TxDescriptors
-Valid Range: 64-4096
-Default Value: 256
- This value is the number of transmit descriptors allocated by the driver.
- Increasing this value allows the driver to queue more transmits. Each
- descriptor is 16 bytes.
-
-XsumRX
-Valid Range: 0-1
-Default Value: 1
- A value of '1' indicates that the driver should enable IP checksum
- offload for received packets (both UDP and TCP) to the adapter hardware.
-
-
-Improving Performance
-=====================
-
-With the 10 Gigabit server adapters, the default Linux configuration will
-very likely limit the total available throughput artificially. There is a set
-of configuration changes that, when applied together, will increase the ability
-of Linux to transmit and receive data. The following enhancements were
-originally acquired from settings published at http://www.spec.org/web99/ for
-various submitted results using Linux.
-
-NOTE: These changes are only suggestions, and serve as a starting point for
- tuning your network performance.
-
-The changes are made in three major ways, listed in order of greatest effect:
-- Use ip link to modify the mtu (maximum transmission unit) and the txqueuelen
- parameter.
-- Use sysctl to modify /proc parameters (essentially kernel tuning)
-- Use setpci to modify the MMRBC field in PCI-X configuration space to increase
- transmit burst lengths on the bus.
-
-NOTE: setpci modifies the adapter's configuration registers to allow it to read
-up to 4k bytes at a time (for transmits). However, for some systems the
-behavior after modifying this register may be undefined (possibly errors of
-some kind). A power-cycle, hard reset or explicitly setting the e6 register
-back to 22 (setpci -d 8086:1a48 e6.b=22) may be required to get back to a
-stable configuration.
-
-- COPY these lines and paste them into ixgb_perf.sh:
-#!/bin/bash
-echo "configuring network performance , edit this file to change the interface
-or device ID of 10GbE card"
-# set mmrbc to 4k reads, modify only Intel 10GbE device IDs
-# replace 1a48 with appropriate 10GbE device's ID installed on the system,
-# if needed.
-setpci -d 8086:1a48 e6.b=2e
-# set the MTU (max transmission unit) - it requires your switch and clients
-# to change as well.
-# set the txqueuelen
-# your ixgb adapter should be loaded as eth1 for this to work, change if needed
-ip li set dev eth1 mtu 9000 txqueuelen 1000 up
-# call the sysctl utility to modify /proc/sys entries
-sysctl -p ./sysctl_ixgb.conf
-- END ixgb_perf.sh
-
-- COPY these lines and paste them into sysctl_ixgb.conf:
-# some of the defaults may be different for your kernel
-# call this file with sysctl -p <this file>
-# these are just suggested values that worked well to increase throughput in
-# several network benchmark tests, your mileage may vary
-
-### IPV4 specific settings
-# turn TCP timestamp support off, default 1, reduces CPU use
-net.ipv4.tcp_timestamps = 0
-# turn SACK support off, default on
-# on systems with a VERY fast bus -> memory interface this is the big gainer
-net.ipv4.tcp_sack = 0
-# set min/default/max TCP read buffer, default 4096 87380 174760
-net.ipv4.tcp_rmem = 10000000 10000000 10000000
-# set min/pressure/max TCP write buffer, default 4096 16384 131072
-net.ipv4.tcp_wmem = 10000000 10000000 10000000
-# set min/pressure/max TCP buffer space, default 31744 32256 32768
-net.ipv4.tcp_mem = 10000000 10000000 10000000
-
-### CORE settings (mostly for socket and UDP effect)
-# set maximum receive socket buffer size, default 131071
-net.core.rmem_max = 524287
-# set maximum send socket buffer size, default 131071
-net.core.wmem_max = 524287
-# set default receive socket buffer size, default 65535
-net.core.rmem_default = 524287
-# set default send socket buffer size, default 65535
-net.core.wmem_default = 524287
-# set maximum amount of option memory buffers, default 10240
-net.core.optmem_max = 524287
-# set number of unprocessed input packets before kernel starts dropping them; default 300
-net.core.netdev_max_backlog = 300000
-- END sysctl_ixgb.conf
-
-Edit the ixgb_perf.sh script if necessary to change eth1 to whatever interface
-your ixgb driver is using and/or replace '1a48' with appropriate 10GbE device's
-ID installed on the system.
-
-NOTE: Unless these scripts are added to the boot process, these changes will
- only last only until the next system reboot.
-
-
-Resolving Slow UDP Traffic
---------------------------
-If your server does not seem to be able to receive UDP traffic as fast as it
-can receive TCP traffic, it could be because Linux, by default, does not set
-the network stack buffers as large as they need to be to support high UDP
-transfer rates. One way to alleviate this problem is to allow more memory to
-be used by the IP stack to store incoming data.
-
-For instance, use the commands:
- sysctl -w net.core.rmem_max=262143
-and
- sysctl -w net.core.rmem_default=262143
-to increase the read buffer memory max and default to 262143 (256k - 1) from
-defaults of max=131071 (128k - 1) and default=65535 (64k - 1). These variables
-will increase the amount of memory used by the network stack for receives, and
-can be increased significantly more if necessary for your application.
-
-
-Additional Configurations
-=========================
-
- Configuring the Driver on Different Distributions
- -------------------------------------------------
- Configuring a network driver to load properly when the system is started is
- distribution dependent. Typically, the configuration process involves adding
- an alias line to /etc/modprobe.conf as well as editing other system startup
- scripts and/or configuration files. Many popular Linux distributions ship
- with tools to make these changes for you. To learn the proper way to
- configure a network device for your system, refer to your distribution
- documentation. If during this process you are asked for the driver or module
- name, the name for the Linux Base Driver for the Intel 10GbE Family of
- Adapters is ixgb.
-
- Viewing Link Messages
- ---------------------
- Link messages will not be displayed to the console if the distribution is
- restricting system messages. In order to see network driver link messages on
- your console, set dmesg to eight by entering the following:
-
- dmesg -n 8
-
- NOTE: This setting is not saved across reboots.
-
-
- Jumbo Frames
- ------------
- The driver supports Jumbo Frames for all adapters. Jumbo Frames support is
- enabled by changing the MTU to a value larger than the default of 1500.
- The maximum value for the MTU is 16114. Use the ip command to
- increase the MTU size. For example:
-
- ip li set dev ethx mtu 9000
-
- The maximum MTU setting for Jumbo Frames is 16114. This value coincides
- with the maximum Jumbo Frames size of 16128.
-
-
- ethtool
- -------
- The driver utilizes the ethtool interface for driver configuration and
- diagnostics, as well as displaying statistical information. The ethtool
- version 1.6 or later is required for this functionality.
-
- The latest release of ethtool can be found from
- https://www.kernel.org/pub/software/network/ethtool/
-
- NOTE: The ethtool version 1.6 only supports a limited set of ethtool options.
- Support for a more complete ethtool feature set can be enabled by
- upgrading to the latest version.
-
-
- NAPI
- ----
-
- NAPI (Rx polling mode) is supported in the ixgb driver. NAPI is enabled
- or disabled based on the configuration of the kernel. see CONFIG_IXGB_NAPI
-
- See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
-
-
-Known Issues/Troubleshooting
-============================
-
- NOTE: After installing the driver, if your Intel Network Connection is not
- working, verify in the "In This Release" section of the readme that you have
- installed the correct driver.
-
- Intel(R) PRO/10GbE CX4 Server Adapter Cable Interoperability Issue with
- Fujitsu XENPAK Module in SmartBits Chassis
- ---------------------------------------------------------------------
- Excessive CRC errors may be observed if the Intel(R) PRO/10GbE CX4
- Server adapter is connected to a Fujitsu XENPAK CX4 module in a SmartBits
- chassis using 15 m/24AWG cable assemblies manufactured by Fujitsu or Leoni.
- The CRC errors may be received either by the Intel(R) PRO/10GbE CX4
- Server adapter or the SmartBits. If this situation occurs using a different
- cable assembly may resolve the issue.
-
- CX4 Server Adapter Cable Interoperability Issues with HP Procurve 3400cl
- Switch Port
- ------------------------------------------------------------------------
- Excessive CRC errors may be observed if the Intel(R) PRO/10GbE CX4 Server
- adapter is connected to an HP Procurve 3400cl switch port using short cables
- (1 m or shorter). If this situation occurs, using a longer cable may resolve
- the issue.
-
- Excessive CRC errors may be observed using Fujitsu 24AWG cable assemblies that
- Are 10 m or longer or where using a Leoni 15 m/24AWG cable assembly. The CRC
- errors may be received either by the CX4 Server adapter or at the switch. If
- this situation occurs, using a different cable assembly may resolve the issue.
-
-
- Jumbo Frames System Requirement
- -------------------------------
- Memory allocation failures have been observed on Linux systems with 64 MB
- of RAM or less that are running Jumbo Frames. If you are using Jumbo
- Frames, your system may require more than the advertised minimum
- requirement of 64 MB of system memory.
-
-
- Performance Degradation with Jumbo Frames
- -----------------------------------------
- Degradation in throughput performance may be observed in some Jumbo frames
- environments. If this is observed, increasing the application's socket buffer
- size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
- See the specific application manual and /usr/src/linux*/Documentation/
- networking/ip-sysctl.txt for more details.
-
-
- Allocating Rx Buffers when Using Jumbo Frames
- ---------------------------------------------
- Allocating Rx buffers when using Jumbo Frames on 2.6.x kernels may fail if
- the available memory is heavily fragmented. This issue may be seen with PCI-X
- adapters or with packet split disabled. This can be reduced or eliminated
- by changing the amount of available memory for receive buffer allocation, by
- increasing /proc/sys/vm/min_free_kbytes.
-
-
- Multiple Interfaces on Same Ethernet Broadcast Network
- ------------------------------------------------------
- Due to the default ARP behavior on Linux, it is not possible to have
- one system on two IP networks in the same Ethernet broadcast domain
- (non-partitioned switch) behave as expected. All Ethernet interfaces
- will respond to IP traffic for any IP address assigned to the system.
- This results in unbalanced receive traffic.
-
- If you have multiple interfaces in a server, do either of the following:
-
- - Turn on ARP filtering by entering:
- echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
-
- - Install the interfaces in separate broadcast domains - either in
- different switches or in a switch partitioned to VLANs.
-
-
- UDP Stress Test Dropped Packet Issue
- --------------------------------------
- Under small packets UDP stress test with 10GbE driver, the Linux system
- may drop UDP packets due to the fullness of socket buffers. You may want
- to change the driver's Flow Control variables to the minimum value for
- controlling packet reception.
-
-
- Tx Hangs Possible Under Stress
- ------------------------------
- Under stress conditions, if TX hangs occur, turning off TSO
- "ethtool -K eth0 tso off" may resolve the problem.
-
-
-Support
-=======
-
-For general information, go to the Intel support website at:
-
- http://support.intel.com
-
-or the Intel Wired Networking project hosted by Sourceforge at:
-
- http://sourceforge.net/projects/e1000
-
-If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related
-to the issue to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/ixgbe.rst b/Documentation/networking/ixgbe.rst
new file mode 100644
index 000000000000..725fc697fd8f
--- /dev/null
+++ b/Documentation/networking/ixgbe.rst
@@ -0,0 +1,527 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Linux* Base Driver for the Intel(R) Ethernet 10 Gigabit PCI Express Adapters
+=============================================================================
+
+Intel 10 Gigabit Linux driver.
+Copyright(c) 1999-2018 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Command Line Parameters
+- Additional Configurations
+- Known Issues
+- Support
+
+Identifying Your Adapter
+========================
+The driver is compatible with devices based on the following:
+
+ * Intel(R) Ethernet Controller 82598
+ * Intel(R) Ethernet Controller 82599
+ * Intel(R) Ethernet Controller X520
+ * Intel(R) Ethernet Controller X540
+ * Intel(R) Ethernet Controller x550
+ * Intel(R) Ethernet Controller X552
+ * Intel(R) Ethernet Controller X553
+
+For information on how to identify your adapter, and for the latest Intel
+network drivers, refer to the Intel Support website:
+https://www.intel.com/support
+
+SFP+ Devices with Pluggable Optics
+----------------------------------
+
+82599-BASED ADAPTERS
+~~~~~~~~~~~~~~~~~~~~
+NOTES:
+- If your 82599-based Intel(R) Network Adapter came with Intel optics or is an
+Intel(R) Ethernet Server Adapter X520-2, then it only supports Intel optics
+and/or the direct attach cables listed below.
+- When 82599-based SFP+ devices are connected back to back, they should be set
+to the same Speed setting via ethtool. Results may vary if you mix speed
+settings.
+
++---------------+---------------------------------------+------------------+
+| Supplier | Type | Part Numbers |
++===============+=======================================+==================+
+| SR Modules |
++---------------+---------------------------------------+------------------+
+| Intel | DUAL RATE 1G/10G SFP+ SR (bailed) | FTLX8571D3BCV-IT |
++---------------+---------------------------------------+------------------+
+| Intel | DUAL RATE 1G/10G SFP+ SR (bailed) | AFBR-703SDZ-IN2 |
++---------------+---------------------------------------+------------------+
+| Intel | DUAL RATE 1G/10G SFP+ SR (bailed) | AFBR-703SDDZ-IN1 |
++---------------+---------------------------------------+------------------+
+| LR Modules |
++---------------+---------------------------------------+------------------+
+| Intel | DUAL RATE 1G/10G SFP+ LR (bailed) | FTLX1471D3BCV-IT |
++---------------+---------------------------------------+------------------+
+| Intel | DUAL RATE 1G/10G SFP+ LR (bailed) | AFCT-701SDZ-IN2 |
++---------------+---------------------------------------+------------------+
+| Intel | DUAL RATE 1G/10G SFP+ LR (bailed) | AFCT-701SDDZ-IN1 |
++---------------+---------------------------------------+------------------+
+
+The following is a list of 3rd party SFP+ modules that have received some
+testing. Not all modules are applicable to all devices.
+
++---------------+---------------------------------------+------------------+
+| Supplier | Type | Part Numbers |
++===============+=======================================+==================+
+| Finisar | SFP+ SR bailed, 10g single rate | FTLX8571D3BCL |
++---------------+---------------------------------------+------------------+
+| Avago | SFP+ SR bailed, 10g single rate | AFBR-700SDZ |
++---------------+---------------------------------------+------------------+
+| Finisar | SFP+ LR bailed, 10g single rate | FTLX1471D3BCL |
++---------------+---------------------------------------+------------------+
+| Finisar | DUAL RATE 1G/10G SFP+ SR (No Bail) | FTLX8571D3QCV-IT |
++---------------+---------------------------------------+------------------+
+| Avago | DUAL RATE 1G/10G SFP+ SR (No Bail) | AFBR-703SDZ-IN1 |
++---------------+---------------------------------------+------------------+
+| Finisar | DUAL RATE 1G/10G SFP+ LR (No Bail) | FTLX1471D3QCV-IT |
++---------------+---------------------------------------+------------------+
+| Avago | DUAL RATE 1G/10G SFP+ LR (No Bail) | AFCT-701SDZ-IN1 |
++---------------+---------------------------------------+------------------+
+| Finisar | 1000BASE-T SFP | FCLF8522P2BTL |
++---------------+---------------------------------------+------------------+
+| Avago | 1000BASE-T | ABCU-5710RZ |
++---------------+---------------------------------------+------------------+
+| HP | 1000BASE-SX SFP | 453153-001 |
++---------------+---------------------------------------+------------------+
+
+82599-based adapters support all passive and active limiting direct attach
+cables that comply with SFF-8431 v4.1 and SFF-8472 v10.4 specifications.
+
+Laser turns off for SFP+ when ifconfig ethX down
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+"ifconfig ethX down" turns off the laser for 82599-based SFP+ fiber adapters.
+"ifconfig ethX up" turns on the laser.
+Alternatively, you can use "ip link set [down/up] dev ethX" to turn the
+laser off and on.
+
+
+82599-based QSFP+ Adapters
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+NOTES:
+- If your 82599-based Intel(R) Network Adapter came with Intel optics, it only
+supports Intel optics.
+- 82599-based QSFP+ adapters only support 4x10 Gbps connections. 1x40 Gbps
+connections are not supported. QSFP+ link partners must be configured for
+4x10 Gbps.
+- 82599-based QSFP+ adapters do not support automatic link speed detection.
+The link speed must be configured to either 10 Gbps or 1 Gbps to match the link
+partners speed capabilities. Incorrect speed configurations will result in
+failure to link.
+- Intel(R) Ethernet Converged Network Adapter X520-Q1 only supports the optics
+and direct attach cables listed below.
+
++---------------+---------------------------------------+------------------+
+| Supplier | Type | Part Numbers |
++===============+=======================================+==================+
+| Intel | DUAL RATE 1G/10G QSFP+ SRL (bailed) | E10GQSFPSR |
++---------------+---------------------------------------+------------------+
+
+82599-based QSFP+ adapters support all passive and active limiting QSFP+
+direct attach cables that comply with SFF-8436 v4.1 specifications.
+
+82598-BASED ADAPTERS
+~~~~~~~~~~~~~~~~~~~~
+NOTES:
+- Intel(r) Ethernet Network Adapters that support removable optical modules
+only support their original module type (for example, the Intel(R) 10 Gigabit
+SR Dual Port Express Module only supports SR optical modules). If you plug in
+a different type of module, the driver will not load.
+- Hot Swapping/hot plugging optical modules is not supported.
+- Only single speed, 10 gigabit modules are supported.
+- LAN on Motherboard (LOMs) may support DA, SR, or LR modules. Other module
+types are not supported. Please see your system documentation for details.
+
+The following is a list of SFP+ modules and direct attach cables that have
+received some testing. Not all modules are applicable to all devices.
+
++---------------+---------------------------------------+------------------+
+| Supplier | Type | Part Numbers |
++===============+=======================================+==================+
+| Finisar | SFP+ SR bailed, 10g single rate | FTLX8571D3BCL |
++---------------+---------------------------------------+------------------+
+| Avago | SFP+ SR bailed, 10g single rate | AFBR-700SDZ |
++---------------+---------------------------------------+------------------+
+| Finisar | SFP+ LR bailed, 10g single rate | FTLX1471D3BCL |
++---------------+---------------------------------------+------------------+
+
+82598-based adapters support all passive direct attach cables that comply with
+SFF-8431 v4.1 and SFF-8472 v10.4 specifications. Active direct attach cables
+are not supported.
+
+Third party optic modules and cables referred to above are listed only for the
+purpose of highlighting third party specifications and potential
+compatibility, and are not recommendations or endorsements or sponsorship of
+any third party's product by Intel. Intel is not endorsing or promoting
+products made by any third party and the third party reference is provided
+only to share information regarding certain optic modules and cables with the
+above specifications. There may be other manufacturers or suppliers, producing
+or supplying optic modules and cables with similar or matching descriptions.
+Customers must use their own discretion and diligence to purchase optic
+modules and cables from any third party of their choice. Customers are solely
+responsible for assessing the suitability of the product and/or devices and
+for the selection of the vendor for purchasing any product. THE OPTIC MODULES
+AND CABLES REFERRED TO ABOVE ARE NOT WARRANTED OR SUPPORTED BY INTEL. INTEL
+ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED
+WARRANTY, RELATING TO SALE AND/OR USE OF SUCH THIRD PARTY PRODUCTS OR
+SELECTION OF VENDOR BY CUSTOMERS.
+
+Command Line Parameters
+=======================
+
+max_vfs
+-------
+:Valid Range: 1-63
+
+This parameter adds support for SR-IOV. It causes the driver to spawn up to
+max_vfs worth of virtual functions.
+If the value is greater than 0 it will also force the VMDq parameter to be 1 or
+more.
+
+NOTE: This parameter is only used on kernel 3.7.x and below. On kernel 3.8.x
+and above, use sysfs to enable VFs. Also, for Red Hat distributions, this
+parameter is only used on version 6.6 and older. For version 6.7 and newer, use
+sysfs. For example::
+
+ #echo $num_vf_enabled > /sys/class/net/$dev/device/sriov_numvfs // enable VFs
+ #echo 0 > /sys/class/net/$dev/device/sriov_numvfs //disable VFs
+
+The parameters for the driver are referenced by position. Thus, if you have a
+dual port adapter, or more than one adapter in your system, and want N virtual
+functions per port, you must specify a number for each port with each parameter
+separated by a comma. For example::
+
+ modprobe ixgbe max_vfs=4
+
+This will spawn 4 VFs on the first port.
+
+::
+
+ modprobe ixgbe max_vfs=2,4
+
+This will spawn 2 VFs on the first port and 4 VFs on the second port.
+
+NOTE: Caution must be used in loading the driver with these parameters.
+Depending on your system configuration, number of slots, etc., it is impossible
+to predict in all cases where the positions would be on the command line.
+
+NOTE: Neither the device nor the driver control how VFs are mapped into config
+space. Bus layout will vary by operating system. On operating systems that
+support it, you can check sysfs to find the mapping.
+
+NOTE: When either SR-IOV mode or VMDq mode is enabled, hardware VLAN filtering
+and VLAN tag stripping/insertion will remain enabled. Please remove the old
+VLAN filter before the new VLAN filter is added. For example,
+
+::
+
+ ip link set eth0 vf 0 vlan 100 // set VLAN 100 for VF 0
+ ip link set eth0 vf 0 vlan 0 // Delete VLAN 100
+ ip link set eth0 vf 0 vlan 200 // set a new VLAN 200 for VF 0
+
+With kernel 3.6, the driver supports the simultaneous usage of max_vfs and DCB
+features, subject to the constraints described below. Prior to kernel 3.6, the
+driver did not support the simultaneous operation of max_vfs greater than 0 and
+the DCB features (multiple traffic classes utilizing Priority Flow Control and
+Extended Transmission Selection).
+
+When DCB is enabled, network traffic is transmitted and received through
+multiple traffic classes (packet buffers in the NIC). The traffic is associated
+with a specific class based on priority, which has a value of 0 through 7 used
+in the VLAN tag. When SR-IOV is not enabled, each traffic class is associated
+with a set of receive/transmit descriptor queue pairs. The number of queue
+pairs for a given traffic class depends on the hardware configuration. When
+SR-IOV is enabled, the descriptor queue pairs are grouped into pools. The
+Physical Function (PF) and each Virtual Function (VF) is allocated a pool of
+receive/transmit descriptor queue pairs. When multiple traffic classes are
+configured (for example, DCB is enabled), each pool contains a queue pair from
+each traffic class. When a single traffic class is configured in the hardware,
+the pools contain multiple queue pairs from the single traffic class.
+
+The number of VFs that can be allocated depends on the number of traffic
+classes that can be enabled. The configurable number of traffic classes for
+each enabled VF is as follows:
+0 - 15 VFs = Up to 8 traffic classes, depending on device support
+16 - 31 VFs = Up to 4 traffic classes
+32 - 63 VFs = 1 traffic class
+
+When VFs are configured, the PF is allocated one pool as well. The PF supports
+the DCB features with the constraint that each traffic class will only use a
+single queue pair. When zero VFs are configured, the PF can support multiple
+queue pairs per traffic class.
+
+allow_unsupported_sfp
+---------------------
+:Valid Range: 0,1
+:Default Value: 0 (disabled)
+
+This parameter allows unsupported and untested SFP+ modules on 82599-based
+adapters, as long as the type of module is known to the driver.
+
+debug
+-----
+:Valid Range: 0-16 (0=none,...,16=all)
+:Default Value: 0
+
+This parameter adjusts the level of debug messages displayed in the system
+logs.
+
+
+Additional Features and Configurations
+======================================
+
+Flow Control
+------------
+Ethernet Flow Control (IEEE 802.3x) can be configured with ethtool to enable
+receiving and transmitting pause frames for ixgbe. When transmit is enabled,
+pause frames are generated when the receive packet buffer crosses a predefined
+threshold. When receive is enabled, the transmit unit will halt for the time
+delay specified when a pause frame is received.
+
+NOTE: You must have a flow control capable link partner.
+
+Flow Control is enabled by default.
+
+Use ethtool to change the flow control settings. To enable or disable Rx or
+Tx Flow Control::
+
+ ethtool -A eth? rx <on|off> tx <on|off>
+
+Note: This command only enables or disables Flow Control if auto-negotiation is
+disabled. If auto-negotiation is enabled, this command changes the parameters
+used for auto-negotiation with the link partner.
+
+To enable or disable auto-negotiation::
+
+ ethtool -s eth? autoneg <on|off>
+
+Note: Flow Control auto-negotiation is part of link auto-negotiation. Depending
+on your device, you may not be able to change the auto-negotiation setting.
+
+NOTE: For 82598 backplane cards entering 1 gigabit mode, flow control default
+behavior is changed to off. Flow control in 1 gigabit mode on these devices can
+lead to transmit hangs.
+
+Intel(R) Ethernet Flow Director
+-------------------------------
+The Intel Ethernet Flow Director performs the following tasks:
+
+- Directs receive packets according to their flows to different queues.
+- Enables tight control on routing a flow in the platform.
+- Matches flows and CPU cores for flow affinity.
+- Supports multiple parameters for flexible flow classification and load
+ balancing (in SFP mode only).
+
+NOTE: Intel Ethernet Flow Director masking works in the opposite manner from
+subnet masking. In the following command::
+
+ #ethtool -N eth11 flow-type ip4 src-ip 172.4.1.2 m 255.0.0.0 dst-ip \
+ 172.21.1.1 m 255.128.0.0 action 31
+
+The src-ip value that is written to the filter will be 0.4.1.2, not 172.0.0.0
+as might be expected. Similarly, the dst-ip value written to the filter will be
+0.21.1.1, not 172.0.0.0.
+
+To enable or disable the Intel Ethernet Flow Director::
+
+ # ethtool -K ethX ntuple <on|off>
+
+When disabling ntuple filters, all the user programmed filters are flushed from
+the driver cache and hardware. All needed filters must be re-added when ntuple
+is re-enabled.
+
+To add a filter that directs packet to queue 2, use -U or -N switch::
+
+ # ethtool -N ethX flow-type tcp4 src-ip 192.168.10.1 dst-ip \
+ 192.168.10.2 src-port 2000 dst-port 2001 action 2 [loc 1]
+
+To see the list of filters currently present::
+
+ # ethtool <-u|-n> ethX
+
+Sideband Perfect Filters
+------------------------
+Sideband Perfect Filters are used to direct traffic that matches specified
+characteristics. They are enabled through ethtool's ntuple interface. To add a
+new filter use the following command::
+
+ ethtool -U <device> flow-type <type> src-ip <ip> dst-ip <ip> src-port <port> \
+ dst-port <port> action <queue>
+
+Where:
+ <device> - the ethernet device to program
+ <type> - can be ip4, tcp4, udp4, or sctp4
+ <ip> - the IP address to match on
+ <port> - the port number to match on
+ <queue> - the queue to direct traffic towards (-1 discards the matched traffic)
+
+Use the following command to delete a filter::
+
+ ethtool -U <device> delete <N>
+
+Where <N> is the filter id displayed when printing all the active filters, and
+may also have been specified using "loc <N>" when adding the filter.
+
+The following example matches TCP traffic sent from 192.168.0.1, port 5300,
+directed to 192.168.0.5, port 80, and sends it to queue 7::
+
+ ethtool -U enp130s0 flow-type tcp4 src-ip 192.168.0.1 dst-ip 192.168.0.5 \
+ src-port 5300 dst-port 80 action 7
+
+For each flow-type, the programmed filters must all have the same matching
+input set. For example, issuing the following two commands is acceptable::
+
+ ethtool -U enp130s0 flow-type ip4 src-ip 192.168.0.1 src-port 5300 action 7
+ ethtool -U enp130s0 flow-type ip4 src-ip 192.168.0.5 src-port 55 action 10
+
+Issuing the next two commands, however, is not acceptable, since the first
+specifies src-ip and the second specifies dst-ip::
+
+ ethtool -U enp130s0 flow-type ip4 src-ip 192.168.0.1 src-port 5300 action 7
+ ethtool -U enp130s0 flow-type ip4 dst-ip 192.168.0.5 src-port 55 action 10
+
+The second command will fail with an error. You may program multiple filters
+with the same fields, using different values, but, on one device, you may not
+program two TCP4 filters with different matching fields.
+
+Matching on a sub-portion of a field is not supported by the ixgbe driver, thus
+partial mask fields are not supported.
+
+To create filters that direct traffic to a specific Virtual Function, use the
+"user-def" parameter. Specify the user-def as a 64 bit value, where the lower 32
+bits represents the queue number, while the next 8 bits represent which VF.
+Note that 0 is the PF, so the VF identifier is offset by 1. For example::
+
+ ... user-def 0x800000002 ...
+
+specifies to direct traffic to Virtual Function 7 (8 minus 1) into queue 2 of
+that VF.
+
+Note that these filters will not break internal routing rules, and will not
+route traffic that otherwise would not have been sent to the specified Virtual
+Function.
+
+Jumbo Frames
+------------
+Jumbo Frames support is enabled by changing the Maximum Transmission Unit (MTU)
+to a value larger than the default value of 1500.
+
+Use the ifconfig command to increase the MTU size. For example, enter the
+following where <x> is the interface number::
+
+ ifconfig eth<x> mtu 9000 up
+
+Alternatively, you can use the ip command as follows::
+
+ ip link set mtu 9000 dev eth<x>
+ ip link set up dev eth<x>
+
+This setting is not saved across reboots. The setting change can be made
+permanent by adding 'MTU=9000' to the file::
+
+ /etc/sysconfig/network-scripts/ifcfg-eth<x> // for RHEL
+ /etc/sysconfig/network/<config_file> // for SLES
+
+NOTE: The maximum MTU setting for Jumbo Frames is 9710. This value coincides
+with the maximum Jumbo Frames size of 9728 bytes.
+
+NOTE: This driver will attempt to use multiple page sized buffers to receive
+each jumbo packet. This should help to avoid buffer starvation issues when
+allocating receive packets.
+
+NOTE: For 82599-based network connections, if you are enabling jumbo frames in
+a virtual function (VF), jumbo frames must first be enabled in the physical
+function (PF). The VF MTU setting cannot be larger than the PF MTU.
+
+Generic Receive Offload, aka GRO
+--------------------------------
+The driver supports the in-kernel software implementation of GRO. GRO has
+shown that by coalescing Rx traffic into larger chunks of data, CPU
+utilization can be significantly reduced when under large Rx load. GRO is an
+evolution of the previously-used LRO interface. GRO is able to coalesce
+other protocols besides TCP. It's also safe to use with configurations that
+are problematic for LRO, namely bridging and iSCSI.
+
+Data Center Bridging (DCB)
+--------------------------
+NOTE:
+The kernel assumes that TC0 is available, and will disable Priority Flow
+Control (PFC) on the device if TC0 is not available. To fix this, ensure TC0 is
+enabled when setting up DCB on your switch.
+
+DCB is a configuration Quality of Service implementation in hardware. It uses
+the VLAN priority tag (802.1p) to filter traffic. That means that there are 8
+different priorities that traffic can be filtered into. It also enables
+priority flow control (802.1Qbb) which can limit or eliminate the number of
+dropped packets during network stress. Bandwidth can be allocated to each of
+these priorities, which is enforced at the hardware level (802.1Qaz).
+
+Adapter firmware implements LLDP and DCBX protocol agents as per 802.1AB and
+802.1Qaz respectively. The firmware based DCBX agent runs in willing mode only
+and can accept settings from a DCBX capable peer. Software configuration of
+DCBX parameters via dcbtool/lldptool are not supported.
+
+The ixgbe driver implements the DCB netlink interface layer to allow user-space
+to communicate with the driver and query DCB configuration for the port.
+
+ethtool
+-------
+The driver utilizes the ethtool interface for driver configuration and
+diagnostics, as well as displaying statistical information. The latest ethtool
+version is required for this functionality. Download it at:
+https://www.kernel.org/pub/software/network/ethtool/
+
+FCoE
+----
+The ixgbe driver supports Fiber Channel over Ethernet (FCoE) and Data Center
+Bridging (DCB). This code has no default effect on the regular driver
+operation. Configuring DCB and FCoE is outside the scope of this README. Refer
+to http://www.open-fcoe.org/ for FCoE project information and contact
+ixgbe-eedc@lists.sourceforge.net for DCB information.
+
+MAC and VLAN anti-spoofing feature
+----------------------------------
+When a malicious driver attempts to send a spoofed packet, it is dropped by the
+hardware and not transmitted.
+
+An interrupt is sent to the PF driver notifying it of the spoof attempt. When a
+spoofed packet is detected, the PF driver will send the following message to
+the system log (displayed by the "dmesg" command)::
+
+ ixgbe ethX: ixgbe_spoof_check: n spoofed packets detected
+
+where "x" is the PF interface number; and "n" is number of spoofed packets.
+NOTE: This feature can be disabled for a specific Virtual Function (VF)::
+
+ ip link set <pf dev> vf <vf id> spoofchk {off|on}
+
+
+Known Issues/Troubleshooting
+============================
+
+Enabling SR-IOV in a 64-bit Microsoft* Windows Server* 2012/R2 guest OS
+-----------------------------------------------------------------------
+Linux KVM Hypervisor/VMM supports direct assignment of a PCIe device to a VM.
+This includes traditional PCIe devices, as well as SR-IOV-capable devices based
+on the Intel Ethernet Controller XL710.
+
+
+Support
+=======
+For general information, go to the Intel support website at:
+
+https://www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+https://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on a supported kernel
+with a supported adapter, email the specific information related to the issue
+to e1000-devel@lists.sf.net.
diff --git a/Documentation/networking/ixgbe.txt b/Documentation/networking/ixgbe.txt
deleted file mode 100644
index 687835415707..000000000000
--- a/Documentation/networking/ixgbe.txt
+++ /dev/null
@@ -1,349 +0,0 @@
-Linux* Base Driver for the Intel(R) Ethernet 10 Gigabit PCI Express Family of
-Adapters
-=============================================================================
-
-Intel 10 Gigabit Linux driver.
-Copyright(c) 1999 - 2013 Intel Corporation.
-
-Contents
-========
-
-- Identifying Your Adapter
-- Additional Configurations
-- Performance Tuning
-- Known Issues
-- Support
-
-Identifying Your Adapter
-========================
-
-The driver in this release is compatible with 82598, 82599 and X540-based
-Intel Network Connections.
-
-For more information on how to identify your adapter, go to the Adapter &
-Driver ID Guide at:
-
- http://support.intel.com/support/network/sb/CS-012904.htm
-
-SFP+ Devices with Pluggable Optics
-----------------------------------
-
-82599-BASED ADAPTERS
-
-NOTES: If your 82599-based Intel(R) Network Adapter came with Intel optics, or
-is an Intel(R) Ethernet Server Adapter X520-2, then it only supports Intel
-optics and/or the direct attach cables listed below.
-
-When 82599-based SFP+ devices are connected back to back, they should be set to
-the same Speed setting via ethtool. Results may vary if you mix speed settings.
-82598-based adapters support all passive direct attach cables that comply
-with SFF-8431 v4.1 and SFF-8472 v10.4 specifications. Active direct attach
-cables are not supported.
-
-Supplier Type Part Numbers
-
-SR Modules
-Intel DUAL RATE 1G/10G SFP+ SR (bailed) FTLX8571D3BCV-IT
-Intel DUAL RATE 1G/10G SFP+ SR (bailed) AFBR-703SDDZ-IN1
-Intel DUAL RATE 1G/10G SFP+ SR (bailed) AFBR-703SDZ-IN2
-LR Modules
-Intel DUAL RATE 1G/10G SFP+ LR (bailed) FTLX1471D3BCV-IT
-Intel DUAL RATE 1G/10G SFP+ LR (bailed) AFCT-701SDDZ-IN1
-Intel DUAL RATE 1G/10G SFP+ LR (bailed) AFCT-701SDZ-IN2
-
-The following is a list of 3rd party SFP+ modules and direct attach cables that
-have received some testing. Not all modules are applicable to all devices.
-
-Supplier Type Part Numbers
-
-Finisar SFP+ SR bailed, 10g single rate FTLX8571D3BCL
-Avago SFP+ SR bailed, 10g single rate AFBR-700SDZ
-Finisar SFP+ LR bailed, 10g single rate FTLX1471D3BCL
-
-Finisar DUAL RATE 1G/10G SFP+ SR (No Bail) FTLX8571D3QCV-IT
-Avago DUAL RATE 1G/10G SFP+ SR (No Bail) AFBR-703SDZ-IN1
-Finisar DUAL RATE 1G/10G SFP+ LR (No Bail) FTLX1471D3QCV-IT
-Avago DUAL RATE 1G/10G SFP+ LR (No Bail) AFCT-701SDZ-IN1
-Finistar 1000BASE-T SFP FCLF8522P2BTL
-Avago 1000BASE-T SFP ABCU-5710RZ
-
-82599-based adapters support all passive and active limiting direct attach
-cables that comply with SFF-8431 v4.1 and SFF-8472 v10.4 specifications.
-
-Laser turns off for SFP+ when device is down
--------------------------------------------
-"ip link set down" turns off the laser for 82599-based SFP+ fiber adapters.
-"ip link set up" turns on the laser.
-
-
-82598-BASED ADAPTERS
-
-NOTES for 82598-Based Adapters:
-- Intel(R) Network Adapters that support removable optical modules only support
- their original module type (i.e., the Intel(R) 10 Gigabit SR Dual Port
- Express Module only supports SR optical modules). If you plug in a different
- type of module, the driver will not load.
-- Hot Swapping/hot plugging optical modules is not supported.
-- Only single speed, 10 gigabit modules are supported.
-- LAN on Motherboard (LOMs) may support DA, SR, or LR modules. Other module
- types are not supported. Please see your system documentation for details.
-
-The following is a list of 3rd party SFP+ modules and direct attach cables that
-have received some testing. Not all modules are applicable to all devices.
-
-Supplier Type Part Numbers
-
-Finisar SFP+ SR bailed, 10g single rate FTLX8571D3BCL
-Avago SFP+ SR bailed, 10g single rate AFBR-700SDZ
-Finisar SFP+ LR bailed, 10g single rate FTLX1471D3BCL
-
-82598-based adapters support all passive direct attach cables that comply
-with SFF-8431 v4.1 and SFF-8472 v10.4 specifications. Active direct attach
-cables are not supported.
-
-
-Flow Control
-------------
-Ethernet Flow Control (IEEE 802.3x) can be configured with ethtool to enable
-receiving and transmitting pause frames for ixgbe. When TX is enabled, PAUSE
-frames are generated when the receive packet buffer crosses a predefined
-threshold. When rx is enabled, the transmit unit will halt for the time delay
-specified when a PAUSE frame is received.
-
-Flow Control is enabled by default. If you want to disable a flow control
-capable link partner, use ethtool:
-
- ethtool -A eth? autoneg off RX off TX off
-
-NOTE: For 82598 backplane cards entering 1 gig mode, flow control default
-behavior is changed to off. Flow control in 1 gig mode on these devices can
-lead to Tx hangs.
-
-Intel(R) Ethernet Flow Director
--------------------------------
-Supports advanced filters that direct receive packets by their flows to
-different queues. Enables tight control on routing a flow in the platform.
-Matches flows and CPU cores for flow affinity. Supports multiple parameters
-for flexible flow classification and load balancing.
-
-Flow director is enabled only if the kernel is multiple TX queue capable.
-
-An included script (set_irq_affinity.sh) automates setting the IRQ to CPU
-affinity.
-
-You can verify that the driver is using Flow Director by looking at the counter
-in ethtool: fdir_miss and fdir_match.
-
-Other ethtool Commands:
-To enable Flow Director
- ethtool -K ethX ntuple on
-To add a filter
- Use -U switch. e.g., ethtool -U ethX flow-type tcp4 src-ip 10.0.128.23
- action 1
-To see the list of filters currently present:
- ethtool -u ethX
-
-Perfect Filter: Perfect filter is an interface to load the filter table that
-funnels all flow into queue_0 unless an alternative queue is specified using
-"action". In that case, any flow that matches the filter criteria will be
-directed to the appropriate queue.
-
-If the queue is defined as -1, filter will drop matching packets.
-
-To account for filter matches and misses, there are two stats in ethtool:
-fdir_match and fdir_miss. In addition, rx_queue_N_packets shows the number of
-packets processed by the Nth queue.
-
-NOTE: Receive Packet Steering (RPS) and Receive Flow Steering (RFS) are not
-compatible with Flow Director. IF Flow Director is enabled, these will be
-disabled.
-
-The following three parameters impact Flow Director.
-
-FdirMode
---------
-Valid Range: 0-2 (0=off, 1=ATR, 2=Perfect filter mode)
-Default Value: 1
-
- Flow Director filtering modes.
-
-FdirPballoc
------------
-Valid Range: 0-2 (0=64k, 1=128k, 2=256k)
-Default Value: 0
-
- Flow Director allocated packet buffer size.
-
-AtrSampleRate
---------------
-Valid Range: 1-100
-Default Value: 20
-
- Software ATR Tx packet sample rate. For example, when set to 20, every 20th
- packet, looks to see if the packet will create a new flow.
-
-Node
-----
-Valid Range: 0-n
-Default Value: 1 (off)
-
- 0 - n: where n is the number of NUMA nodes (i.e. 0 - 3) currently online in
- your system
- 1: turns this option off
-
- The Node parameter will allow you to pick which NUMA node you want to have
- the adapter allocate memory on.
-
-max_vfs
--------
-Valid Range: 1-63
-Default Value: 0
-
- If the value is greater than 0 it will also force the VMDq parameter to be 1
- or more.
-
- This parameter adds support for SR-IOV. It causes the driver to spawn up to
- max_vfs worth of virtual function.
-
-
-Additional Configurations
-=========================
-
- Jumbo Frames
- ------------
- The driver supports Jumbo Frames for all adapters. Jumbo Frames support is
- enabled by changing the MTU to a value larger than the default of 1500.
- The maximum value for the MTU is 16110. Use the ip command to
- increase the MTU size. For example:
-
- ip link set dev ethx mtu 9000
-
- The maximum MTU setting for Jumbo Frames is 9710. This value coincides
- with the maximum Jumbo Frames size of 9728.
-
- Generic Receive Offload, aka GRO
- --------------------------------
- The driver supports the in-kernel software implementation of GRO. GRO has
- shown that by coalescing Rx traffic into larger chunks of data, CPU
- utilization can be significantly reduced when under large Rx load. GRO is an
- evolution of the previously-used LRO interface. GRO is able to coalesce
- other protocols besides TCP. It's also safe to use with configurations that
- are problematic for LRO, namely bridging and iSCSI.
-
- Data Center Bridging, aka DCB
- -----------------------------
- DCB is a configuration Quality of Service implementation in hardware.
- It uses the VLAN priority tag (802.1p) to filter traffic. That means
- that there are 8 different priorities that traffic can be filtered into.
- It also enables priority flow control which can limit or eliminate the
- number of dropped packets during network stress. Bandwidth can be
- allocated to each of these priorities, which is enforced at the hardware
- level.
-
- To enable DCB support in ixgbe, you must enable the DCB netlink layer to
- allow the userspace tools (see below) to communicate with the driver.
- This can be found in the kernel configuration here:
-
- -> Networking support
- -> Networking options
- -> Data Center Bridging support
-
- Once this is selected, DCB support must be selected for ixgbe. This can
- be found here:
-
- -> Device Drivers
- -> Network device support (NETDEVICES [=y])
- -> Ethernet (10000 Mbit) (NETDEV_10000 [=y])
- -> Intel(R) 10GbE PCI Express adapters support
- -> Data Center Bridging (DCB) Support
-
- After these options are selected, you must rebuild your kernel and your
- modules.
-
- In order to use DCB, userspace tools must be downloaded and installed.
- The dcbd tools can be found at:
-
- http://e1000.sf.net
-
- Ethtool
- -------
- The driver utilizes the ethtool interface for driver configuration and
- diagnostics, as well as displaying statistical information. The latest
- ethtool version is required for this functionality.
-
- The latest release of ethtool can be found from
- https://www.kernel.org/pub/software/network/ethtool/
-
- FCoE
- ----
- This release of the ixgbe driver contains new code to enable users to use
- Fiber Channel over Ethernet (FCoE) and Data Center Bridging (DCB)
- functionality that is supported by the 82598-based hardware. This code has
- no default effect on the regular driver operation, and configuring DCB and
- FCoE is outside the scope of this driver README. Refer to
- http://www.open-fcoe.org/ for FCoE project information and contact
- e1000-eedc@lists.sourceforge.net for DCB information.
-
- MAC and VLAN anti-spoofing feature
- ----------------------------------
- When a malicious driver attempts to send a spoofed packet, it is dropped by
- the hardware and not transmitted. An interrupt is sent to the PF driver
- notifying it of the spoof attempt.
-
- When a spoofed packet is detected the PF driver will send the following
- message to the system log (displayed by the "dmesg" command):
-
- Spoof event(s) detected on VF (n)
-
- Where n=the VF that attempted to do the spoofing.
-
-
-Performance Tuning
-==================
-
-An excellent article on performance tuning can be found at:
-
-http://www.redhat.com/promo/summit/2008/downloads/pdf/Thursday/Mark_Wagner.pdf
-
-
-Known Issues
-============
-
- Enabling SR-IOV in a 32-bit or 64-bit Microsoft* Windows* Server 2008/R2
- Guest OS using Intel (R) 82576-based GbE or Intel (R) 82599-based 10GbE
- controller under KVM
- ------------------------------------------------------------------------
- KVM Hypervisor/VMM supports direct assignment of a PCIe device to a VM. This
- includes traditional PCIe devices, as well as SR-IOV-capable devices using
- Intel 82576-based and 82599-based controllers.
-
- While direct assignment of a PCIe device or an SR-IOV Virtual Function (VF)
- to a Linux-based VM running 2.6.32 or later kernel works fine, there is a
- known issue with Microsoft Windows Server 2008 VM that results in a "yellow
- bang" error. This problem is within the KVM VMM itself, not the Intel driver,
- or the SR-IOV logic of the VMM, but rather that KVM emulates an older CPU
- model for the guests, and this older CPU model does not support MSI-X
- interrupts, which is a requirement for Intel SR-IOV.
-
- If you wish to use the Intel 82576 or 82599-based controllers in SR-IOV mode
- with KVM and a Microsoft Windows Server 2008 guest try the following
- workaround. The workaround is to tell KVM to emulate a different model of CPU
- when using qemu to create the KVM guest:
-
- "-cpu qemu64,model=13"
-
-
-Support
-=======
-
-For general information, go to the Intel support website at:
-
- http://support.intel.com
-
-or the Intel Wired Networking project hosted by Sourceforge at:
-
- http://e1000.sourceforge.net
-
-If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related
-to the issue to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/ixgbevf.rst b/Documentation/networking/ixgbevf.rst
new file mode 100644
index 000000000000..56cde6366c2f
--- /dev/null
+++ b/Documentation/networking/ixgbevf.rst
@@ -0,0 +1,66 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Linux* Base Virtual Function Driver for Intel(R) 10G Ethernet
+=============================================================
+
+Intel 10 Gigabit Virtual Function Linux driver.
+Copyright(c) 1999-2018 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Known Issues
+- Support
+
+This driver supports 82599, X540, X550, and X552-based virtual function devices
+that can only be activated on kernels that support SR-IOV.
+
+For questions related to hardware requirements, refer to the documentation
+supplied with your Intel adapter. All hardware requirements listed apply to use
+with Linux.
+
+
+Identifying Your Adapter
+========================
+The driver is compatible with devices based on the following:
+
+ * Intel(R) Ethernet Controller 82598
+ * Intel(R) Ethernet Controller 82599
+ * Intel(R) Ethernet Controller X520
+ * Intel(R) Ethernet Controller X540
+ * Intel(R) Ethernet Controller x550
+ * Intel(R) Ethernet Controller X552
+ * Intel(R) Ethernet Controller X553
+
+For information on how to identify your adapter, and for the latest Intel
+network drivers, refer to the Intel Support website:
+https://www.intel.com/support
+
+Known Issues/Troubleshooting
+============================
+
+SR-IOV requires the correct platform and OS support.
+
+The guest OS loading this driver must support MSI-X interrupts.
+
+This driver is only supported as a loadable module at this time. Intel is not
+supplying patches against the kernel source to allow for static linking of the
+drivers.
+
+VLANs: There is a limit of a total of 64 shared VLANs to 1 or more VFs.
+
+
+Support
+=======
+For general information, go to the Intel support website at:
+
+https://www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+https://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on a supported kernel
+with a supported adapter, email the specific information related to the issue
+to e1000-devel@lists.sf.net.
diff --git a/Documentation/networking/ixgbevf.txt b/Documentation/networking/ixgbevf.txt
deleted file mode 100644
index 53d8d2a5a6a3..000000000000
--- a/Documentation/networking/ixgbevf.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-Linux* Base Driver for Intel(R) Ethernet Network Connection
-===========================================================
-
-Intel Gigabit Linux driver.
-Copyright(c) 1999 - 2013 Intel Corporation.
-
-Contents
-========
-
-- Identifying Your Adapter
-- Known Issues/Troubleshooting
-- Support
-
-This file describes the ixgbevf Linux* Base Driver for Intel Network
-Connection.
-
-The ixgbevf driver supports 82599-based virtual function devices that can only
-be activated on kernels with CONFIG_PCI_IOV enabled.
-
-The ixgbevf driver supports virtual functions generated by the ixgbe driver
-with a max_vfs value of 1 or greater.
-
-The guest OS loading the ixgbevf driver must support MSI-X interrupts.
-
-VLANs: There is a limit of a total of 32 shared VLANs to 1 or more VFs.
-
-Identifying Your Adapter
-========================
-
-For more information on how to identify your adapter, go to the Adapter &
-Driver ID Guide at:
-
- http://support.intel.com/support/go/network/adapter/idguide.htm
-
-Known Issues/Troubleshooting
-============================
-
-
-Support
-=======
-
-For general information, go to the Intel support website at:
-
- http://support.intel.com
-
-or the Intel Wired Networking project hosted by Sourceforge at:
-
- http://sourceforge.net/projects/e1000
-
-If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related
-to the issue to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/netvsc.txt b/Documentation/networking/netvsc.txt
index 92f5b31392fa..3bfa635bbbd5 100644
--- a/Documentation/networking/netvsc.txt
+++ b/Documentation/networking/netvsc.txt
@@ -45,6 +45,15 @@ Features
like packets and significantly reduces CPU usage under heavy Rx
load.
+ Large Receive Offload (LRO), or Receive Side Coalescing (RSC)
+ -------------------------------------------------------------
+ The driver supports LRO/RSC in the vSwitch feature. It reduces the per packet
+ processing overhead by coalescing multiple TCP segments when possible. The
+ feature is enabled by default on VMs running on Windows Server 2019 and
+ later. It may be changed by ethtool command:
+ ethtool -K eth0 lro on
+ ethtool -K eth0 lro off
+
SR-IOV support
--------------
Hyper-V supports SR-IOV as a hardware acceleration option. If SR-IOV
diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt
index b5407163d53b..605e00cdd6be 100644
--- a/Documentation/networking/rxrpc.txt
+++ b/Documentation/networking/rxrpc.txt
@@ -1069,6 +1069,31 @@ The kernel interface functions are as follows:
This function may transmit a PING ACK.
+ (*) Get reply timestamp.
+
+ bool rxrpc_kernel_get_reply_time(struct socket *sock,
+ struct rxrpc_call *call,
+ ktime_t *_ts)
+
+ This allows the timestamp on the first DATA packet of the reply of a
+ client call to be queried, provided that it is still in the Rx ring. If
+ successful, the timestamp will be stored into *_ts and true will be
+ returned; false will be returned otherwise.
+
+ (*) Get remote client epoch.
+
+ u32 rxrpc_kernel_get_epoch(struct socket *sock,
+ struct rxrpc_call *call)
+
+ This allows the epoch that's contained in packets of an incoming client
+ call to be queried. This value is returned. The function always
+ successful if the call is still in progress. It shouldn't be called once
+ the call has expired. Note that calling this on a local client call only
+ returns the local epoch.
+
+ This value can be used to determine if the remote client has been
+ restarted as it shouldn't change otherwise.
+
=======================
CONFIGURABLE PARAMETERS
diff --git a/Documentation/networking/tcp.txt b/Documentation/networking/tcp.txt
deleted file mode 100644
index 9c7139d57e57..000000000000
--- a/Documentation/networking/tcp.txt
+++ /dev/null
@@ -1,101 +0,0 @@
-TCP protocol
-============
-
-Last updated: 3 June 2017
-
-Contents
-========
-
-- Congestion control
-- How the new TCP output machine [nyi] works
-
-Congestion control
-==================
-
-The following variables are used in the tcp_sock for congestion control:
-snd_cwnd The size of the congestion window
-snd_ssthresh Slow start threshold. We are in slow start if
- snd_cwnd is less than this.
-snd_cwnd_cnt A counter used to slow down the rate of increase
- once we exceed slow start threshold.
-snd_cwnd_clamp This is the maximum size that snd_cwnd can grow to.
-snd_cwnd_stamp Timestamp for when congestion window last validated.
-snd_cwnd_used Used as a highwater mark for how much of the
- congestion window is in use. It is used to adjust
- snd_cwnd down when the link is limited by the
- application rather than the network.
-
-As of 2.6.13, Linux supports pluggable congestion control algorithms.
-A congestion control mechanism can be registered through functions in
-tcp_cong.c. The functions used by the congestion control mechanism are
-registered via passing a tcp_congestion_ops struct to
-tcp_register_congestion_control. As a minimum, the congestion control
-mechanism must provide a valid name and must implement either ssthresh,
-cong_avoid and undo_cwnd hooks or the "omnipotent" cong_control hook.
-
-Private data for a congestion control mechanism is stored in tp->ca_priv.
-tcp_ca(tp) returns a pointer to this space. This is preallocated space - it
-is important to check the size of your private data will fit this space, or
-alternatively, space could be allocated elsewhere and a pointer to it could
-be stored here.
-
-There are three kinds of congestion control algorithms currently: The
-simplest ones are derived from TCP reno (highspeed, scalable) and just
-provide an alternative congestion window calculation. More complex
-ones like BIC try to look at other events to provide better
-heuristics. There are also round trip time based algorithms like
-Vegas and Westwood+.
-
-Good TCP congestion control is a complex problem because the algorithm
-needs to maintain fairness and performance. Please review current
-research and RFC's before developing new modules.
-
-The default congestion control mechanism is chosen based on the
-DEFAULT_TCP_CONG Kconfig parameter. If you really want a particular default
-value then you can set it using sysctl net.ipv4.tcp_congestion_control. The
-module will be autoloaded if needed and you will get the expected protocol. If
-you ask for an unknown congestion method, then the sysctl attempt will fail.
-
-If you remove a TCP congestion control module, then you will get the next
-available one. Since reno cannot be built as a module, and cannot be
-removed, it will always be available.
-
-How the new TCP output machine [nyi] works.
-===========================================
-
-Data is kept on a single queue. The skb->users flag tells us if the frame is
-one that has been queued already. To add a frame we throw it on the end. Ack
-walks down the list from the start.
-
-We keep a set of control flags
-
-
- sk->tcp_pend_event
-
- TCP_PEND_ACK Ack needed
- TCP_ACK_NOW Needed now
- TCP_WINDOW Window update check
- TCP_WINZERO Zero probing
-
-
- sk->transmit_queue The transmission frame begin
- sk->transmit_new First new frame pointer
- sk->transmit_end Where to add frames
-
- sk->tcp_last_tx_ack Last ack seen
- sk->tcp_dup_ack Dup ack count for fast retransmit
-
-
-Frames are queued for output by tcp_write. We do our best to send the frames
-off immediately if possible, but otherwise queue and compute the body
-checksum in the copy.
-
-When a write is done we try to clear any pending events and piggy back them.
-If the window is full we queue full sized frames. On the first timeout in
-zero window we split this.
-
-On a timer we walk the retransmit list to send any retransmits, update the
-backoff timers etc. A change of route table stamp causes a change of header
-and recompute. We add any new tcp level headers and refinish the checksum
-before sending.
-
diff --git a/Documentation/networking/xfrm_device.txt b/Documentation/networking/xfrm_device.txt
index 50c34ca65efe..267f55b5f54a 100644
--- a/Documentation/networking/xfrm_device.txt
+++ b/Documentation/networking/xfrm_device.txt
@@ -68,6 +68,10 @@ and an indication of whether it is for Rx or Tx. The driver should
- verify the algorithm is supported for offloads
- store the SA information (key, salt, target-ip, protocol, etc)
- enable the HW offload of the SA
+ - return status value:
+ 0 success
+ -EOPNETSUPP offload not supported, try SW IPsec
+ other fail the request
The driver can also set an offload_handle in the SA, an opaque void pointer
that can be used to convey context into the fast-path offload requests.
diff --git a/Documentation/nvmem/nvmem.txt b/Documentation/nvmem/nvmem.txt
index 8d8d8f58f96f..fc2fe4b18655 100644
--- a/Documentation/nvmem/nvmem.txt
+++ b/Documentation/nvmem/nvmem.txt
@@ -58,6 +58,37 @@ static int qfprom_probe(struct platform_device *pdev)
It is mandatory that the NVMEM provider has a regmap associated with its
struct device. Failure to do would return error code from nvmem_register().
+Users of board files can define and register nvmem cells using the
+nvmem_cell_table struct:
+
+static struct nvmem_cell_info foo_nvmem_cells[] = {
+ {
+ .name = "macaddr",
+ .offset = 0x7f00,
+ .bytes = ETH_ALEN,
+ }
+};
+
+static struct nvmem_cell_table foo_nvmem_cell_table = {
+ .nvmem_name = "i2c-eeprom",
+ .cells = foo_nvmem_cells,
+ .ncells = ARRAY_SIZE(foo_nvmem_cells),
+};
+
+nvmem_add_cell_table(&foo_nvmem_cell_table);
+
+Additionally it is possible to create nvmem cell lookup entries and register
+them with the nvmem framework from machine code as shown in the example below:
+
+static struct nvmem_cell_lookup foo_nvmem_lookup = {
+ .nvmem_name = "i2c-eeprom",
+ .cell_name = "macaddr",
+ .dev_id = "foo_mac.0",
+ .con_id = "mac-address",
+};
+
+nvmem_add_cell_lookups(&foo_nvmem_lookup, 1);
+
NVMEM Consumers
+++++++++++++++
diff --git a/Documentation/parisc/00-INDEX b/Documentation/parisc/00-INDEX
deleted file mode 100644
index cbd060961f43..000000000000
--- a/Documentation/parisc/00-INDEX
+++ /dev/null
@@ -1,6 +0,0 @@
-00-INDEX
- - this file.
-debugging
- - some debugging hints for real-mode code
-registers
- - current/planned usage of registers
diff --git a/Documentation/power/00-INDEX b/Documentation/power/00-INDEX
deleted file mode 100644
index 7f3c2def2cac..000000000000
--- a/Documentation/power/00-INDEX
+++ /dev/null
@@ -1,44 +0,0 @@
-00-INDEX
- - This file
-apm-acpi.txt
- - basic info about the APM and ACPI support.
-basic-pm-debugging.txt
- - Debugging suspend and resume
-charger-manager.txt
- - Battery charger management.
-admin-guide/devices.rst
- - How drivers interact with system-wide power management
-drivers-testing.txt
- - Testing suspend and resume support in device drivers
-freezing-of-tasks.txt
- - How processes and controlled during suspend
-interface.txt
- - Power management user interface in /sys/power
-opp.txt
- - Operating Performance Point library
-pci.txt
- - How the PCI Subsystem Does Power Management
-pm_qos_interface.txt
- - info on Linux PM Quality of Service interface
-power_supply_class.txt
- - Tells userspace about battery, UPS, AC or DC power supply properties
-runtime_pm.txt
- - Power management framework for I/O devices.
-s2ram.txt
- - How to get suspend to ram working (and debug it when it isn't)
-states.txt
- - System power management states
-suspend-and-cpuhotplug.txt
- - Explains the interaction between Suspend-to-RAM (S3) and CPU hotplug
-swsusp-and-swap-files.txt
- - Using swap files with software suspend (to disk)
-swsusp-dmcrypt.txt
- - How to use dm-crypt and software suspend (to disk) together
-swsusp.txt
- - Goals, implementation, and usage of software suspend (ACPI S3)
-tricks.txt
- - How to trick software suspend (to disk) into working when it isn't
-userland-swsusp.txt
- - Experimental implementation of software suspend in userspace
-video.txt
- - Video issues during resume from suspend
diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt
index cc87adf44c0a..236d1fb13640 100644
--- a/Documentation/power/swsusp.txt
+++ b/Documentation/power/swsusp.txt
@@ -56,7 +56,7 @@ If you want to limit the suspend image size to N bytes, do
echo N > /sys/power/image_size
-before suspend (it is limited to 500 MB by default).
+before suspend (it is limited to around 2/5 of available RAM by default).
. The resume process checks for the presence of the resume device,
if found, it then checks the contents for the hibernation image signature.
diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX
deleted file mode 100644
index 9dc845cf7d88..000000000000
--- a/Documentation/powerpc/00-INDEX
+++ /dev/null
@@ -1,34 +0,0 @@
-Index of files in Documentation/powerpc. If you think something about
-Linux/PPC needs an entry here, needs correction or you've written one
-please mail me.
- Cort Dougan (cort@fsmlabs.com)
-
-00-INDEX
- - this file
-bootwrapper.txt
- - Information on how the powerpc kernel is wrapped for boot on various
- different platforms.
-cpu_features.txt
- - info on how we support a variety of CPUs with minimal compile-time
- options.
-cxl.txt
- - Overview of the CXL driver.
-eeh-pci-error-recovery.txt
- - info on PCI Bus EEH Error Recovery
-firmware-assisted-dump.txt
- - Documentation on the firmware assisted dump mechanism "fadump".
-hvcs.txt
- - IBM "Hypervisor Virtual Console Server" Installation Guide
-mpc52xx.txt
- - Linux 2.6.x on MPC52xx family
-pmu-ebb.txt
- - Description of the API for using the PMU with Event Based Branches.
-qe_firmware.txt
- - describes the layout of firmware binaries for the Freescale QUICC
- Engine and the code that parses and uploads the microcode therein.
-ptrace.txt
- - Information on the ptrace interfaces for hardware debug registers.
-transactional_memory.txt
- - Overview of the Power8 transactional memory support.
-dscr.txt
- - Overview DSCR (Data Stream Control Register) support.
diff --git a/Documentation/preempt-locking.txt b/Documentation/preempt-locking.txt
index c945062be66c..509f5a422d57 100644
--- a/Documentation/preempt-locking.txt
+++ b/Documentation/preempt-locking.txt
@@ -3,7 +3,6 @@ Proper Locking Under a Preemptible Kernel: Keeping Kernel Code Preempt-Safe
===========================================================================
:Author: Robert Love <rml@tech9.net>
-:Last Updated: 28 Aug 2002
Introduction
@@ -92,11 +91,12 @@ any locks or interrupts are disabled, since preemption is implicitly disabled
in those cases.
But keep in mind that 'irqs disabled' is a fundamentally unsafe way of
-disabling preemption - any spin_unlock() decreasing the preemption count
-to 0 might trigger a reschedule. A simple printk() might trigger a reschedule.
-So use this implicit preemption-disabling property only if you know that the
-affected codepath does not do any of this. Best policy is to use this only for
-small, atomic code that you wrote and which calls no complex functions.
+disabling preemption - any cond_resched() or cond_resched_lock() might trigger
+a reschedule if the preempt count is 0. A simple printk() might trigger a
+reschedule. So use this implicit preemption-disabling property only if you
+know that the affected codepath does not do any of this. Best policy is to use
+this only for small, atomic code that you wrote and which calls no complex
+functions.
Example::
diff --git a/Documentation/process/2.Process.rst b/Documentation/process/2.Process.rst
index 51d0349c7809..ae020d84d7c4 100644
--- a/Documentation/process/2.Process.rst
+++ b/Documentation/process/2.Process.rst
@@ -82,7 +82,7 @@ As an example, here is how the 4.16 development cycle went (all dates in
March 11 4.16-rc5
March 18 4.16-rc6
March 25 4.16-rc7
- April 1 4.17 stable release
+ April 1 4.16 stable release
============== ===============================
How do the developers decide when to close the development cycle and create
diff --git a/Documentation/process/adding-syscalls.rst b/Documentation/process/adding-syscalls.rst
index 0d4f29bc798b..88a7d5c8bb2f 100644
--- a/Documentation/process/adding-syscalls.rst
+++ b/Documentation/process/adding-syscalls.rst
@@ -232,7 +232,7 @@ normally be optional, so add a ``CONFIG`` option (typically to
by the option.
- Make the option depend on EXPERT if it should be hidden from normal users.
- Make any new source files implementing the function dependent on the CONFIG
- option in the Makefile (e.g. ``obj-$(CONFIG_XYZZY_SYSCALL) += xyzzy.c``).
+ option in the Makefile (e.g. ``obj-$(CONFIG_XYZZY_SYSCALL) += xyzzy.o``).
- Double check that the kernel still builds with the new CONFIG option turned
off.
diff --git a/Documentation/process/code-of-conduct-interpretation.rst b/Documentation/process/code-of-conduct-interpretation.rst
new file mode 100644
index 000000000000..e899f14a4ba2
--- /dev/null
+++ b/Documentation/process/code-of-conduct-interpretation.rst
@@ -0,0 +1,156 @@
+.. _code_of_conduct_interpretation:
+
+Linux Kernel Contributor Covenant Code of Conduct Interpretation
+================================================================
+
+The :ref:`code_of_conduct` is a general document meant to
+provide a set of rules for almost any open source community. Every
+open-source community is unique and the Linux kernel is no exception.
+Because of this, this document describes how we in the Linux kernel
+community will interpret it. We also do not expect this interpretation
+to be static over time, and will adjust it as needed.
+
+The Linux kernel development effort is a very personal process compared
+to "traditional" ways of developing software. Your contributions and
+ideas behind them will be carefully reviewed, often resulting in
+critique and criticism. The review will almost always require
+improvements before the material can be included in the
+kernel. Know that this happens because everyone involved wants to see
+the best possible solution for the overall success of Linux. This
+development process has been proven to create the most robust operating
+system kernel ever, and we do not want to do anything to cause the
+quality of submission and eventual result to ever decrease.
+
+Maintainers
+-----------
+
+The Code of Conduct uses the term "maintainers" numerous times. In the
+kernel community, a "maintainer" is anyone who is responsible for a
+subsystem, driver, or file, and is listed in the MAINTAINERS file in the
+kernel source tree.
+
+Responsibilities
+----------------
+
+The Code of Conduct mentions rights and responsibilities for
+maintainers, and this needs some further clarifications.
+
+First and foremost, it is a reasonable expectation to have maintainers
+lead by example.
+
+That being said, our community is vast and broad, and there is no new
+requirement for maintainers to unilaterally handle how other people
+behave in the parts of the community where they are active. That
+responsibility is upon all of us, and ultimately the Code of Conduct
+documents final escalation paths in case of unresolved concerns
+regarding conduct issues.
+
+Maintainers should be willing to help when problems occur, and work with
+others in the community when needed. Do not be afraid to reach out to
+the Technical Advisory Board (TAB) or other maintainers if you're
+uncertain how to handle situations that come up. It will not be
+considered a violation report unless you want it to be. If you are
+uncertain about approaching the TAB or any other maintainers, please
+reach out to our conflict mediator, Mishi Choudhary <mishi@linux.com>.
+
+In the end, "be kind to each other" is really what the end goal is for
+everybody. We know everyone is human and we all fail at times, but the
+primary goal for all of us should be to work toward amicable resolutions
+of problems. Enforcement of the code of conduct will only be a last
+resort option.
+
+Our goal of creating a robust and technically advanced operating system
+and the technical complexity involved naturally require expertise and
+decision-making.
+
+The required expertise varies depending on the area of contribution. It
+is determined mainly by context and technical complexity and only
+secondary by the expectations of contributors and maintainers.
+
+Both the expertise expectations and decision-making are subject to
+discussion, but at the very end there is a basic necessity to be able to
+make decisions in order to make progress. This prerogative is in the
+hands of maintainers and project's leadership and is expected to be used
+in good faith.
+
+As a consequence, setting expertise expectations, making decisions and
+rejecting unsuitable contributions are not viewed as a violation of the
+Code of Conduct.
+
+While maintainers are in general welcoming to newcomers, their capacity
+of helping contributors overcome the entry hurdles is limited, so they
+have to set priorities. This, also, is not to be seen as a violation of
+the Code of Conduct. The kernel community is aware of that and provides
+entry level programs in various forms like kernelnewbies.org.
+
+Scope
+-----
+
+The Linux kernel community primarily interacts on a set of public email
+lists distributed around a number of different servers controlled by a
+number of different companies or individuals. All of these lists are
+defined in the MAINTAINERS file in the kernel source tree. Any emails
+sent to those mailing lists are considered covered by the Code of
+Conduct.
+
+Developers who use the kernel.org bugzilla, and other subsystem bugzilla
+or bug tracking tools should follow the guidelines of the Code of
+Conduct. The Linux kernel community does not have an "official" project
+email address, or "official" social media address. Any activity
+performed using a kernel.org email account must follow the Code of
+Conduct as published for kernel.org, just as any individual using a
+corporate email account must follow the specific rules of that
+corporation.
+
+The Code of Conduct does not prohibit continuing to include names, email
+addresses, and associated comments in mailing list messages, kernel
+change log messages, or code comments.
+
+Interaction in other forums is covered by whatever rules apply to said
+forums and is in general not covered by the Code of Conduct. Exceptions
+may be considered for extreme circumstances.
+
+Contributions submitted for the kernel should use appropriate language.
+Content that already exists predating the Code of Conduct will not be
+addressed now as a violation. Inappropriate language can be seen as a
+bug, though; such bugs will be fixed more quickly if any interested
+parties submit patches to that effect. Expressions that are currently
+part of the user/kernel API, or reflect terminology used in published
+standards or specifications, are not considered bugs.
+
+Enforcement
+-----------
+
+The address listed in the Code of Conduct goes to the Code of Conduct
+Committee. The exact members receiving these emails at any given time
+are listed at https://kernel.org/code-of-conduct.html. Members can not
+access reports made before they joined or after they have left the
+committee.
+
+The initial Code of Conduct Committee consists of volunteer members of
+the TAB, as well as a professional mediator acting as a neutral third
+party. The first task of the committee is to establish documented
+processes, which will be made public.
+
+Any member of the committee, including the mediator, can be contacted
+directly if a reporter does not wish to include the full committee in a
+complaint or concern.
+
+The Code of Conduct Committee reviews the cases according to the
+processes (see above) and consults with the TAB as needed and
+appropriate, for instance to request and receive information about the
+kernel community.
+
+Any decisions by the committee will be brought to the TAB, for
+implementation of enforcement with the relevant maintainers if needed.
+A decision by the Code of Conduct Committee can be overturned by the TAB
+by a two-thirds vote.
+
+At quarterly intervals, the Code of Conduct Committee and TAB will
+provide a report summarizing the anonymised reports that the Code of
+Conduct committee has received and their status, as well details of any
+overridden decisions including complete and identifiable voting details.
+
+We expect to establish a different process for Code of Conduct Committee
+staffing beyond the bootstrap period. This document will be updated
+with that information when this occurs.
diff --git a/Documentation/process/code-of-conduct.rst b/Documentation/process/code-of-conduct.rst
index ab7c24b5478c..be50294aebd5 100644
--- a/Documentation/process/code-of-conduct.rst
+++ b/Documentation/process/code-of-conduct.rst
@@ -1,3 +1,5 @@
+.. _code_of_conduct:
+
Contributor Covenant Code of Conduct
++++++++++++++++++++++++++++++++++++
@@ -63,19 +65,22 @@ Enforcement
===========
Instances of abusive, harassing, or otherwise unacceptable behavior may be
-reported by contacting the Technical Advisory Board (TAB) at
-<tab@lists.linux-foundation.org>. All complaints will be reviewed and
-investigated and will result in a response that is deemed necessary and
-appropriate to the circumstances. The TAB is obligated to maintain
-confidentiality with regard to the reporter of an incident. Further details of
-specific enforcement policies may be posted separately.
-
-Maintainers who do not follow or enforce the Code of Conduct in good faith may
-face temporary or permanent repercussions as determined by other members of the
-project’s leadership.
+reported by contacting the Code of Conduct Committee at
+<conduct@kernel.org>. All complaints will be reviewed and investigated
+and will result in a response that is deemed necessary and appropriate
+to the circumstances. The Code of Conduct Committee is obligated to
+maintain confidentiality with regard to the reporter of an incident.
+Further details of specific enforcement policies may be posted
+separately.
Attribution
===========
This Code of Conduct is adapted from the Contributor Covenant, version 1.4,
available at https://www.contributor-covenant.org/version/1/4/code-of-conduct.html
+
+Interpretation
+==============
+
+See the :ref:`code_of_conduct_interpretation` document for how the Linux
+kernel community will be interpreting this document.
diff --git a/Documentation/process/deprecated.rst b/Documentation/process/deprecated.rst
new file mode 100644
index 000000000000..0ef5a63c06ba
--- /dev/null
+++ b/Documentation/process/deprecated.rst
@@ -0,0 +1,119 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================================================
+Deprecated Interfaces, Language Features, Attributes, and Conventions
+=====================================================================
+
+In a perfect world, it would be possible to convert all instances of
+some deprecated API into the new API and entirely remove the old API in
+a single development cycle. However, due to the size of the kernel, the
+maintainership hierarchy, and timing, it's not always feasible to do these
+kinds of conversions at once. This means that new instances may sneak into
+the kernel while old ones are being removed, only making the amount of
+work to remove the API grow. In order to educate developers about what
+has been deprecated and why, this list has been created as a place to
+point when uses of deprecated things are proposed for inclusion in the
+kernel.
+
+__deprecated
+------------
+While this attribute does visually mark an interface as deprecated,
+it `does not produce warnings during builds any more
+<https://git.kernel.org/linus/771c035372a036f83353eef46dbb829780330234>`_
+because one of the standing goals of the kernel is to build without
+warnings and no one was actually doing anything to remove these deprecated
+interfaces. While using `__deprecated` is nice to note an old API in
+a header file, it isn't the full solution. Such interfaces must either
+be fully removed from the kernel, or added to this file to discourage
+others from using them in the future.
+
+open-coded arithmetic in allocator arguments
+--------------------------------------------
+Dynamic size calculations (especially multiplication) should not be
+performed in memory allocator (or similar) function arguments due to the
+risk of them overflowing. This could lead to values wrapping around and a
+smaller allocation being made than the caller was expecting. Using those
+allocations could lead to linear overflows of heap memory and other
+misbehaviors. (One exception to this is literal values where the compiler
+can warn if they might overflow. Though using literals for arguments as
+suggested below is also harmless.)
+
+For example, do not use ``count * size`` as an argument, as in::
+
+ foo = kmalloc(count * size, GFP_KERNEL);
+
+Instead, the 2-factor form of the allocator should be used::
+
+ foo = kmalloc_array(count, size, GFP_KERNEL);
+
+If no 2-factor form is available, the saturate-on-overflow helpers should
+be used::
+
+ bar = vmalloc(array_size(count, size));
+
+Another common case to avoid is calculating the size of a structure with
+a trailing array of others structures, as in::
+
+ header = kzalloc(sizeof(*header) + count * sizeof(*header->item),
+ GFP_KERNEL);
+
+Instead, use the helper::
+
+ header = kzalloc(struct_size(header, item, count), GFP_KERNEL);
+
+See :c:func:`array_size`, :c:func:`array3_size`, and :c:func:`struct_size`,
+for more details as well as the related :c:func:`check_add_overflow` and
+:c:func:`check_mul_overflow` family of functions.
+
+simple_strtol(), simple_strtoll(), simple_strtoul(), simple_strtoull()
+----------------------------------------------------------------------
+The :c:func:`simple_strtol`, :c:func:`simple_strtoll`,
+:c:func:`simple_strtoul`, and :c:func:`simple_strtoull` functions
+explicitly ignore overflows, which may lead to unexpected results
+in callers. The respective :c:func:`kstrtol`, :c:func:`kstrtoll`,
+:c:func:`kstrtoul`, and :c:func:`kstrtoull` functions tend to be the
+correct replacements, though note that those require the string to be
+NUL or newline terminated.
+
+strcpy()
+--------
+:c:func:`strcpy` performs no bounds checking on the destination
+buffer. This could result in linear overflows beyond the
+end of the buffer, leading to all kinds of misbehaviors. While
+`CONFIG_FORTIFY_SOURCE=y` and various compiler flags help reduce the
+risk of using this function, there is no good reason to add new uses of
+this function. The safe replacement is :c:func:`strscpy`.
+
+strncpy() on NUL-terminated strings
+-----------------------------------
+Use of :c:func:`strncpy` does not guarantee that the destination buffer
+will be NUL terminated. This can lead to various linear read overflows
+and other misbehavior due to the missing termination. It also NUL-pads the
+destination buffer if the source contents are shorter than the destination
+buffer size, which may be a needless performance penalty for callers using
+only NUL-terminated strings. The safe replacement is :c:func:`strscpy`.
+(Users of :c:func:`strscpy` still needing NUL-padding will need an
+explicit :c:func:`memset` added.)
+
+If a caller is using non-NUL-terminated strings, :c:func:`strncpy()` can
+still be used, but destinations should be marked with the `__nonstring
+<https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html>`_
+attribute to avoid future compiler warnings.
+
+strlcpy()
+---------
+:c:func:`strlcpy` reads the entire source buffer first, possibly exceeding
+the given limit of bytes to copy. This is inefficient and can lead to
+linear read overflows if a source string is not NUL-terminated. The
+safe replacement is :c:func:`strscpy`.
+
+Variable Length Arrays (VLAs)
+-----------------------------
+Using stack VLAs produces much worse machine code than statically
+sized stack arrays. While these non-trivial `performance issues
+<https://git.kernel.org/linus/02361bc77888>`_ are reason enough to
+eliminate VLAs, they are also a security risk. Dynamic growth of a stack
+array may exceed the remaining memory in the stack segment. This could
+lead to a crash, possible overwriting sensitive contents at the end of the
+stack (when built without `CONFIG_THREAD_INFO_IN_TASK=y`), or overwriting
+memory adjacent to the stack (when built without `CONFIG_VMAP_STACK=y`)
diff --git a/Documentation/process/howto.rst b/Documentation/process/howto.rst
index 130bf0f48875..dcb25f94188e 100644
--- a/Documentation/process/howto.rst
+++ b/Documentation/process/howto.rst
@@ -57,12 +57,13 @@ of doing things.
Legal Issues
------------
-The Linux kernel source code is released under the GPL. Please see the
-file, COPYING, in the main directory of the source tree, for details on
-the license. If you have further questions about the license, please
-contact a lawyer, and do not ask on the Linux kernel mailing list. The
-people on the mailing lists are not lawyers, and you should not rely on
-their statements on legal matters.
+The Linux kernel source code is released under the GPL. Please see the file
+COPYING in the main directory of the source tree. The Linux kernel licensing
+rules and how to use `SPDX <https://spdx.org/>`_ identifiers in source code are
+descibed in :ref:`Documentation/process/license-rules.rst <kernel_licensing>`.
+If you have further questions about the license, please contact a lawyer, and do
+not ask on the Linux kernel mailing list. The people on the mailing lists are
+not lawyers, and you should not rely on their statements on legal matters.
For common questions and answers about the GPL, please see:
diff --git a/Documentation/process/index.rst b/Documentation/process/index.rst
index 9ae3e317bddf..878ebfda7eef 100644
--- a/Documentation/process/index.rst
+++ b/Documentation/process/index.rst
@@ -19,10 +19,13 @@ Below are the essential guides that every developer should read.
.. toctree::
:maxdepth: 1
+ license-rules
howto
code-of-conduct
+ code-of-conduct-interpretation
development-process
submitting-patches
+ programming-language
coding-style
maintainer-pgp-guide
email-clients
@@ -41,6 +44,7 @@ Other guides to the community that are of interest to most developers are:
stable-kernel-rules
submit-checklist
kernel-docs
+ deprecated
These are some overall technical guides that have been put here for now for
lack of a better place.
diff --git a/Documentation/process/license-rules.rst b/Documentation/process/license-rules.rst
index 8ea26325fe3f..2bb8c0fc2238 100644
--- a/Documentation/process/license-rules.rst
+++ b/Documentation/process/license-rules.rst
@@ -1,5 +1,7 @@
.. SPDX-License-Identifier: GPL-2.0
+.. _kernel_licensing:
+
Linux kernel licensing rules
============================
diff --git a/Documentation/process/programming-language.rst b/Documentation/process/programming-language.rst
new file mode 100644
index 000000000000..e5f5f065dc24
--- /dev/null
+++ b/Documentation/process/programming-language.rst
@@ -0,0 +1,45 @@
+.. _programming_language:
+
+Programming Language
+====================
+
+The kernel is written in the C programming language [c-language]_.
+More precisely, the kernel is typically compiled with ``gcc`` [gcc]_
+under ``-std=gnu89`` [gcc-c-dialect-options]_: the GNU dialect of ISO C90
+(including some C99 features).
+
+This dialect contains many extensions to the language [gnu-extensions]_,
+and many of them are used within the kernel as a matter of course.
+
+There is some support for compiling the kernel with ``clang`` [clang]_
+and ``icc`` [icc]_ for several of the architectures, although at the time
+of writing it is not completed, requiring third-party patches.
+
+Attributes
+----------
+
+One of the common extensions used throughout the kernel are attributes
+[gcc-attribute-syntax]_. Attributes allow to introduce
+implementation-defined semantics to language entities (like variables,
+functions or types) without having to make significant syntactic changes
+to the language (e.g. adding a new keyword) [n2049]_.
+
+In some cases, attributes are optional (i.e. a compiler not supporting them
+should still produce proper code, even if it is slower or does not perform
+as many compile-time checks/diagnostics).
+
+The kernel defines pseudo-keywords (e.g. ``__pure``) instead of using
+directly the GNU attribute syntax (e.g. ``__attribute__((__pure__))``)
+in order to feature detect which ones can be used and/or to shorten the code.
+
+Please refer to ``include/linux/compiler_attributes.h`` for more information.
+
+.. [c-language] http://www.open-std.org/jtc1/sc22/wg14/www/standards
+.. [gcc] https://gcc.gnu.org
+.. [clang] https://clang.llvm.org
+.. [icc] https://software.intel.com/en-us/c-compilers
+.. [gcc-c-dialect-options] https://gcc.gnu.org/onlinedocs/gcc/C-Dialect-Options.html
+.. [gnu-extensions] https://gcc.gnu.org/onlinedocs/gcc/C-Extensions.html
+.. [gcc-attribute-syntax] https://gcc.gnu.org/onlinedocs/gcc/Attribute-Syntax.html
+.. [n2049] http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2049.pdf
+
diff --git a/Documentation/s390/00-INDEX b/Documentation/s390/00-INDEX
deleted file mode 100644
index 317f0378ae01..000000000000
--- a/Documentation/s390/00-INDEX
+++ /dev/null
@@ -1,28 +0,0 @@
-00-INDEX
- - this file.
-3270.ChangeLog
- - ChangeLog for the UTS Global 3270-support patch (outdated).
-3270.txt
- - how to use the IBM 3270 display system support.
-cds.txt
- - s390 common device support (common I/O layer).
-CommonIO
- - common I/O layer command line parameters, procfs and debugfs entries
-config3270.sh
- - example configuration for 3270 devices.
-DASD
- - information on the DASD disk device driver.
-Debugging390.txt
- - hints for debugging on s390 systems.
-driver-model.txt
- - information on s390 devices and the driver model.
-monreader.txt
- - information on accessing the z/VM monitor stream from Linux.
-qeth.txt
- - HiperSockets Bridge Port Support.
-s390dbf.txt
- - information on using the s390 debug feature.
-vfio-ccw.txt
- information on the vfio-ccw I/O subchannel driver.
-zfcpdump.txt
- - information on the s390 SCSI dump tool.
diff --git a/Documentation/s390/vfio-ap.txt b/Documentation/s390/vfio-ap.txt
new file mode 100644
index 000000000000..65167cfe4485
--- /dev/null
+++ b/Documentation/s390/vfio-ap.txt
@@ -0,0 +1,837 @@
+Introduction:
+============
+The Adjunct Processor (AP) facility is an IBM Z cryptographic facility comprised
+of three AP instructions and from 1 up to 256 PCIe cryptographic adapter cards.
+The AP devices provide cryptographic functions to all CPUs assigned to a
+linux system running in an IBM Z system LPAR.
+
+The AP adapter cards are exposed via the AP bus. The motivation for vfio-ap
+is to make AP cards available to KVM guests using the VFIO mediated device
+framework. This implementation relies considerably on the s390 virtualization
+facilities which do most of the hard work of providing direct access to AP
+devices.
+
+AP Architectural Overview:
+=========================
+To facilitate the comprehension of the design, let's start with some
+definitions:
+
+* AP adapter
+
+ An AP adapter is an IBM Z adapter card that can perform cryptographic
+ functions. There can be from 0 to 256 adapters assigned to an LPAR. Adapters
+ assigned to the LPAR in which a linux host is running will be available to
+ the linux host. Each adapter is identified by a number from 0 to 255; however,
+ the maximum adapter number is determined by machine model and/or adapter type.
+ When installed, an AP adapter is accessed by AP instructions executed by any
+ CPU.
+
+ The AP adapter cards are assigned to a given LPAR via the system's Activation
+ Profile which can be edited via the HMC. When the linux host system is IPL'd
+ in the LPAR, the AP bus detects the AP adapter cards assigned to the LPAR and
+ creates a sysfs device for each assigned adapter. For example, if AP adapters
+ 4 and 10 (0x0a) are assigned to the LPAR, the AP bus will create the following
+ sysfs device entries:
+
+ /sys/devices/ap/card04
+ /sys/devices/ap/card0a
+
+ Symbolic links to these devices will also be created in the AP bus devices
+ sub-directory:
+
+ /sys/bus/ap/devices/[card04]
+ /sys/bus/ap/devices/[card04]
+
+* AP domain
+
+ An adapter is partitioned into domains. An adapter can hold up to 256 domains
+ depending upon the adapter type and hardware configuration. A domain is
+ identified by a number from 0 to 255; however, the maximum domain number is
+ determined by machine model and/or adapter type.. A domain can be thought of
+ as a set of hardware registers and memory used for processing AP commands. A
+ domain can be configured with a secure private key used for clear key
+ encryption. A domain is classified in one of two ways depending upon how it
+ may be accessed:
+
+ * Usage domains are domains that are targeted by an AP instruction to
+ process an AP command.
+
+ * Control domains are domains that are changed by an AP command sent to a
+ usage domain; for example, to set the secure private key for the control
+ domain.
+
+ The AP usage and control domains are assigned to a given LPAR via the system's
+ Activation Profile which can be edited via the HMC. When a linux host system
+ is IPL'd in the LPAR, the AP bus module detects the AP usage and control
+ domains assigned to the LPAR. The domain number of each usage domain and
+ adapter number of each AP adapter are combined to create AP queue devices
+ (see AP Queue section below). The domain number of each control domain will be
+ represented in a bitmask and stored in a sysfs file
+ /sys/bus/ap/ap_control_domain_mask. The bits in the mask, from most to least
+ significant bit, correspond to domains 0-255.
+
+* AP Queue
+
+ An AP queue is the means by which an AP command is sent to a usage domain
+ inside a specific adapter. An AP queue is identified by a tuple
+ comprised of an AP adapter ID (APID) and an AP queue index (APQI). The
+ APQI corresponds to a given usage domain number within the adapter. This tuple
+ forms an AP Queue Number (APQN) uniquely identifying an AP queue. AP
+ instructions include a field containing the APQN to identify the AP queue to
+ which the AP command is to be sent for processing.
+
+ The AP bus will create a sysfs device for each APQN that can be derived from
+ the cross product of the AP adapter and usage domain numbers detected when the
+ AP bus module is loaded. For example, if adapters 4 and 10 (0x0a) and usage
+ domains 6 and 71 (0x47) are assigned to the LPAR, the AP bus will create the
+ following sysfs entries:
+
+ /sys/devices/ap/card04/04.0006
+ /sys/devices/ap/card04/04.0047
+ /sys/devices/ap/card0a/0a.0006
+ /sys/devices/ap/card0a/0a.0047
+
+ The following symbolic links to these devices will be created in the AP bus
+ devices subdirectory:
+
+ /sys/bus/ap/devices/[04.0006]
+ /sys/bus/ap/devices/[04.0047]
+ /sys/bus/ap/devices/[0a.0006]
+ /sys/bus/ap/devices/[0a.0047]
+
+* AP Instructions:
+
+ There are three AP instructions:
+
+ * NQAP: to enqueue an AP command-request message to a queue
+ * DQAP: to dequeue an AP command-reply message from a queue
+ * PQAP: to administer the queues
+
+ AP instructions identify the domain that is targeted to process the AP
+ command; this must be one of the usage domains. An AP command may modify a
+ domain that is not one of the usage domains, but the modified domain
+ must be one of the control domains.
+
+AP and SIE:
+==========
+Let's now take a look at how AP instructions executed on a guest are interpreted
+by the hardware.
+
+A satellite control block called the Crypto Control Block (CRYCB) is attached to
+our main hardware virtualization control block. The CRYCB contains three fields
+to identify the adapters, usage domains and control domains assigned to the KVM
+guest:
+
+* The AP Mask (APM) field is a bit mask that identifies the AP adapters assigned
+ to the KVM guest. Each bit in the mask, from left to right (i.e. from most
+ significant to least significant bit in big endian order), corresponds to
+ an APID from 0-255. If a bit is set, the corresponding adapter is valid for
+ use by the KVM guest.
+
+* The AP Queue Mask (AQM) field is a bit mask identifying the AP usage domains
+ assigned to the KVM guest. Each bit in the mask, from left to right (i.e. from
+ most significant to least significant bit in big endian order), corresponds to
+ an AP queue index (APQI) from 0-255. If a bit is set, the corresponding queue
+ is valid for use by the KVM guest.
+
+* The AP Domain Mask field is a bit mask that identifies the AP control domains
+ assigned to the KVM guest. The ADM bit mask controls which domains can be
+ changed by an AP command-request message sent to a usage domain from the
+ guest. Each bit in the mask, from left to right (i.e. from most significant to
+ least significant bit in big endian order), corresponds to a domain from
+ 0-255. If a bit is set, the corresponding domain can be modified by an AP
+ command-request message sent to a usage domain.
+
+If you recall from the description of an AP Queue, AP instructions include
+an APQN to identify the AP queue to which an AP command-request message is to be
+sent (NQAP and PQAP instructions), or from which a command-reply message is to
+be received (DQAP instruction). The validity of an APQN is defined by the matrix
+calculated from the APM and AQM; it is the cross product of all assigned adapter
+numbers (APM) with all assigned queue indexes (AQM). For example, if adapters 1
+and 2 and usage domains 5 and 6 are assigned to a guest, the APQNs (1,5), (1,6),
+(2,5) and (2,6) will be valid for the guest.
+
+The APQNs can provide secure key functionality - i.e., a private key is stored
+on the adapter card for each of its domains - so each APQN must be assigned to
+at most one guest or to the linux host.
+
+ Example 1: Valid configuration:
+ ------------------------------
+ Guest1: adapters 1,2 domains 5,6
+ Guest2: adapter 1,2 domain 7
+
+ This is valid because both guests have a unique set of APQNs:
+ Guest1 has APQNs (1,5), (1,6), (2,5), (2,6);
+ Guest2 has APQNs (1,7), (2,7)
+
+ Example 2: Valid configuration:
+ ------------------------------
+ Guest1: adapters 1,2 domains 5,6
+ Guest2: adapters 3,4 domains 5,6
+
+ This is also valid because both guests have a unique set of APQNs:
+ Guest1 has APQNs (1,5), (1,6), (2,5), (2,6);
+ Guest2 has APQNs (3,5), (3,6), (4,5), (4,6)
+
+ Example 3: Invalid configuration:
+ --------------------------------
+ Guest1: adapters 1,2 domains 5,6
+ Guest2: adapter 1 domains 6,7
+
+ This is an invalid configuration because both guests have access to
+ APQN (1,6).
+
+The Design:
+===========
+The design introduces three new objects:
+
+1. AP matrix device
+2. VFIO AP device driver (vfio_ap.ko)
+3. VFIO AP mediated matrix pass-through device
+
+The VFIO AP device driver
+-------------------------
+The VFIO AP (vfio_ap) device driver serves the following purposes:
+
+1. Provides the interfaces to secure APQNs for exclusive use of KVM guests.
+
+2. Sets up the VFIO mediated device interfaces to manage a mediated matrix
+ device and creates the sysfs interfaces for assigning adapters, usage
+ domains, and control domains comprising the matrix for a KVM guest.
+
+3. Configures the APM, AQM and ADM in the CRYCB referenced by a KVM guest's
+ SIE state description to grant the guest access to a matrix of AP devices
+
+Reserve APQNs for exclusive use of KVM guests
+---------------------------------------------
+The following block diagram illustrates the mechanism by which APQNs are
+reserved:
+
+ +------------------+
+ 7 remove | |
+ +--------------------> cex4queue driver |
+ | | |
+ | +------------------+
+ |
+ |
+ | +------------------+ +-----------------+
+ | 5 register driver | | 3 create | |
+ | +----------------> Device core +----------> matrix device |
+ | | | | | |
+ | | +--------^---------+ +-----------------+
+ | | |
+ | | +-------------------+
+ | | +-----------------------------------+ |
+ | | | 4 register AP driver | | 2 register device
+ | | | | |
++--------+---+-v---+ +--------+-------+-+
+| | | |
+| ap_bus +--------------------- > vfio_ap driver |
+| | 8 probe | |
++--------^---------+ +--^--^------------+
+6 edit | | |
+ apmask | +-----------------------------+ | 9 mdev create
+ aqmask | | 1 modprobe |
++--------+-----+---+ +----------------+-+ +------------------+
+| | | |8 create | mediated |
+| admin | | VFIO device core |---------> matrix |
+| + | | | device |
++------+-+---------+ +--------^---------+ +--------^---------+
+ | | | |
+ | | 9 create vfio_ap-passthrough | |
+ | +------------------------------+ |
+ +-------------------------------------------------------------+
+ 10 assign adapter/domain/control domain
+
+The process for reserving an AP queue for use by a KVM guest is:
+
+1. The administrator loads the vfio_ap device driver
+2. The vfio-ap driver during its initialization will register a single 'matrix'
+ device with the device core. This will serve as the parent device for
+ all mediated matrix devices used to configure an AP matrix for a guest.
+3. The /sys/devices/vfio_ap/matrix device is created by the device core
+4 The vfio_ap device driver will register with the AP bus for AP queue devices
+ of type 10 and higher (CEX4 and newer). The driver will provide the vfio_ap
+ driver's probe and remove callback interfaces. Devices older than CEX4 queues
+ are not supported to simplify the implementation by not needlessly
+ complicating the design by supporting older devices that will go out of
+ service in the relatively near future, and for which there are few older
+ systems around on which to test.
+5. The AP bus registers the vfio_ap device driver with the device core
+6. The administrator edits the AP adapter and queue masks to reserve AP queues
+ for use by the vfio_ap device driver.
+7. The AP bus removes the AP queues reserved for the vfio_ap driver from the
+ default zcrypt cex4queue driver.
+8. The AP bus probes the vfio_ap device driver to bind the queues reserved for
+ it.
+9. The administrator creates a passthrough type mediated matrix device to be
+ used by a guest
+10 The administrator assigns the adapters, usage domains and control domains
+ to be exclusively used by a guest.
+
+Set up the VFIO mediated device interfaces
+------------------------------------------
+The VFIO AP device driver utilizes the common interface of the VFIO mediated
+device core driver to:
+* Register an AP mediated bus driver to add a mediated matrix device to and
+ remove it from a VFIO group.
+* Create and destroy a mediated matrix device
+* Add a mediated matrix device to and remove it from the AP mediated bus driver
+* Add a mediated matrix device to and remove it from an IOMMU group
+
+The following high-level block diagram shows the main components and interfaces
+of the VFIO AP mediated matrix device driver:
+
+ +-------------+
+ | |
+ | +---------+ | mdev_register_driver() +--------------+
+ | | Mdev | +<-----------------------+ |
+ | | bus | | | vfio_mdev.ko |
+ | | driver | +----------------------->+ |<-> VFIO user
+ | +---------+ | probe()/remove() +--------------+ APIs
+ | |
+ | MDEV CORE |
+ | MODULE |
+ | mdev.ko |
+ | +---------+ | mdev_register_device() +--------------+
+ | |Physical | +<-----------------------+ |
+ | | device | | | vfio_ap.ko |<-> matrix
+ | |interface| +----------------------->+ | device
+ | +---------+ | callback +--------------+
+ +-------------+
+
+During initialization of the vfio_ap module, the matrix device is registered
+with an 'mdev_parent_ops' structure that provides the sysfs attribute
+structures, mdev functions and callback interfaces for managing the mediated
+matrix device.
+
+* sysfs attribute structures:
+ * supported_type_groups
+ The VFIO mediated device framework supports creation of user-defined
+ mediated device types. These mediated device types are specified
+ via the 'supported_type_groups' structure when a device is registered
+ with the mediated device framework. The registration process creates the
+ sysfs structures for each mediated device type specified in the
+ 'mdev_supported_types' sub-directory of the device being registered. Along
+ with the device type, the sysfs attributes of the mediated device type are
+ provided.
+
+ The VFIO AP device driver will register one mediated device type for
+ passthrough devices:
+ /sys/devices/vfio_ap/matrix/mdev_supported_types/vfio_ap-passthrough
+ Only the read-only attributes required by the VFIO mdev framework will
+ be provided:
+ ... name
+ ... device_api
+ ... available_instances
+ ... device_api
+ Where:
+ * name: specifies the name of the mediated device type
+ * device_api: the mediated device type's API
+ * available_instances: the number of mediated matrix passthrough devices
+ that can be created
+ * device_api: specifies the VFIO API
+ * mdev_attr_groups
+ This attribute group identifies the user-defined sysfs attributes of the
+ mediated device. When a device is registered with the VFIO mediated device
+ framework, the sysfs attribute files identified in the 'mdev_attr_groups'
+ structure will be created in the mediated matrix device's directory. The
+ sysfs attributes for a mediated matrix device are:
+ * assign_adapter:
+ * unassign_adapter:
+ Write-only attributes for assigning/unassigning an AP adapter to/from the
+ mediated matrix device. To assign/unassign an adapter, the APID of the
+ adapter is echoed to the respective attribute file.
+ * assign_domain:
+ * unassign_domain:
+ Write-only attributes for assigning/unassigning an AP usage domain to/from
+ the mediated matrix device. To assign/unassign a domain, the domain
+ number of the the usage domain is echoed to the respective attribute
+ file.
+ * matrix:
+ A read-only file for displaying the APQNs derived from the cross product
+ of the adapter and domain numbers assigned to the mediated matrix device.
+ * assign_control_domain:
+ * unassign_control_domain:
+ Write-only attributes for assigning/unassigning an AP control domain
+ to/from the mediated matrix device. To assign/unassign a control domain,
+ the ID of the domain to be assigned/unassigned is echoed to the respective
+ attribute file.
+ * control_domains:
+ A read-only file for displaying the control domain numbers assigned to the
+ mediated matrix device.
+
+* functions:
+ * create:
+ allocates the ap_matrix_mdev structure used by the vfio_ap driver to:
+ * Store the reference to the KVM structure for the guest using the mdev
+ * Store the AP matrix configuration for the adapters, domains, and control
+ domains assigned via the corresponding sysfs attributes files
+ * remove:
+ deallocates the mediated matrix device's ap_matrix_mdev structure. This will
+ be allowed only if a running guest is not using the mdev.
+
+* callback interfaces
+ * open:
+ The vfio_ap driver uses this callback to register a
+ VFIO_GROUP_NOTIFY_SET_KVM notifier callback function for the mdev matrix
+ device. The open is invoked when QEMU connects the VFIO iommu group
+ for the mdev matrix device to the MDEV bus. Access to the KVM structure used
+ to configure the KVM guest is provided via this callback. The KVM structure,
+ is used to configure the guest's access to the AP matrix defined via the
+ mediated matrix device's sysfs attribute files.
+ * release:
+ unregisters the VFIO_GROUP_NOTIFY_SET_KVM notifier callback function for the
+ mdev matrix device and deconfigures the guest's AP matrix.
+
+Configure the APM, AQM and ADM in the CRYCB:
+-------------------------------------------
+Configuring the AP matrix for a KVM guest will be performed when the
+VFIO_GROUP_NOTIFY_SET_KVM notifier callback is invoked. The notifier
+function is called when QEMU connects to KVM. The guest's AP matrix is
+configured via it's CRYCB by:
+* Setting the bits in the APM corresponding to the APIDs assigned to the
+ mediated matrix device via its 'assign_adapter' interface.
+* Setting the bits in the AQM corresponding to the domains assigned to the
+ mediated matrix device via its 'assign_domain' interface.
+* Setting the bits in the ADM corresponding to the domain dIDs assigned to the
+ mediated matrix device via its 'assign_control_domains' interface.
+
+The CPU model features for AP
+-----------------------------
+The AP stack relies on the presence of the AP instructions as well as two
+facilities: The AP Facilities Test (APFT) facility; and the AP Query
+Configuration Information (QCI) facility. These features/facilities are made
+available to a KVM guest via the following CPU model features:
+
+1. ap: Indicates whether the AP instructions are installed on the guest. This
+ feature will be enabled by KVM only if the AP instructions are installed
+ on the host.
+
+2. apft: Indicates the APFT facility is available on the guest. This facility
+ can be made available to the guest only if it is available on the host (i.e.,
+ facility bit 15 is set).
+
+3. apqci: Indicates the AP QCI facility is available on the guest. This facility
+ can be made available to the guest only if it is available on the host (i.e.,
+ facility bit 12 is set).
+
+Note: If the user chooses to specify a CPU model different than the 'host'
+model to QEMU, the CPU model features and facilities need to be turned on
+explicitly; for example:
+
+ /usr/bin/qemu-system-s390x ... -cpu z13,ap=on,apqci=on,apft=on
+
+A guest can be precluded from using AP features/facilities by turning them off
+explicitly; for example:
+
+ /usr/bin/qemu-system-s390x ... -cpu host,ap=off,apqci=off,apft=off
+
+Note: If the APFT facility is turned off (apft=off) for the guest, the guest
+will not see any AP devices. The zcrypt device drivers that register for type 10
+and newer AP devices - i.e., the cex4card and cex4queue device drivers - need
+the APFT facility to ascertain the facilities installed on a given AP device. If
+the APFT facility is not installed on the guest, then the probe of device
+drivers will fail since only type 10 and newer devices can be configured for
+guest use.
+
+Example:
+=======
+Let's now provide an example to illustrate how KVM guests may be given
+access to AP facilities. For this example, we will show how to configure
+three guests such that executing the lszcrypt command on the guests would
+look like this:
+
+Guest1
+------
+CARD.DOMAIN TYPE MODE
+------------------------------
+05 CEX5C CCA-Coproc
+05.0004 CEX5C CCA-Coproc
+05.00ab CEX5C CCA-Coproc
+06 CEX5A Accelerator
+06.0004 CEX5A Accelerator
+06.00ab CEX5C CCA-Coproc
+
+Guest2
+------
+CARD.DOMAIN TYPE MODE
+------------------------------
+05 CEX5A Accelerator
+05.0047 CEX5A Accelerator
+05.00ff CEX5A Accelerator
+
+Guest2
+------
+CARD.DOMAIN TYPE MODE
+------------------------------
+06 CEX5A Accelerator
+06.0047 CEX5A Accelerator
+06.00ff CEX5A Accelerator
+
+These are the steps:
+
+1. Install the vfio_ap module on the linux host. The dependency chain for the
+ vfio_ap module is:
+ * iommu
+ * s390
+ * zcrypt
+ * vfio
+ * vfio_mdev
+ * vfio_mdev_device
+ * KVM
+
+ To build the vfio_ap module, the kernel build must be configured with the
+ following Kconfig elements selected:
+ * IOMMU_SUPPORT
+ * S390
+ * ZCRYPT
+ * S390_AP_IOMMU
+ * VFIO
+ * VFIO_MDEV
+ * VFIO_MDEV_DEVICE
+ * KVM
+
+ If using make menuconfig select the following to build the vfio_ap module:
+ -> Device Drivers
+ -> IOMMU Hardware Support
+ select S390 AP IOMMU Support
+ -> VFIO Non-Privileged userspace driver framework
+ -> Mediated device driver frramework
+ -> VFIO driver for Mediated devices
+ -> I/O subsystem
+ -> VFIO support for AP devices
+
+2. Secure the AP queues to be used by the three guests so that the host can not
+ access them. To secure them, there are two sysfs files that specify
+ bitmasks marking a subset of the APQN range as 'usable by the default AP
+ queue device drivers' or 'not usable by the default device drivers' and thus
+ available for use by the vfio_ap device driver'. The location of the sysfs
+ files containing the masks are:
+
+ /sys/bus/ap/apmask
+ /sys/bus/ap/aqmask
+
+ The 'apmask' is a 256-bit mask that identifies a set of AP adapter IDs
+ (APID). Each bit in the mask, from left to right (i.e., from most significant
+ to least significant bit in big endian order), corresponds to an APID from
+ 0-255. If a bit is set, the APID is marked as usable only by the default AP
+ queue device drivers; otherwise, the APID is usable by the vfio_ap
+ device driver.
+
+ The 'aqmask' is a 256-bit mask that identifies a set of AP queue indexes
+ (APQI). Each bit in the mask, from left to right (i.e., from most significant
+ to least significant bit in big endian order), corresponds to an APQI from
+ 0-255. If a bit is set, the APQI is marked as usable only by the default AP
+ queue device drivers; otherwise, the APQI is usable by the vfio_ap device
+ driver.
+
+ Take, for example, the following mask:
+
+ 0x7dffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
+
+ It indicates:
+
+ 1, 2, 3, 4, 5, and 7-255 belong to the default drivers' pool, and 0 and 6
+ belong to the vfio_ap device driver's pool.
+
+ The APQN of each AP queue device assigned to the linux host is checked by the
+ AP bus against the set of APQNs derived from the cross product of APIDs
+ and APQIs marked as usable only by the default AP queue device drivers. If a
+ match is detected, only the default AP queue device drivers will be probed;
+ otherwise, the vfio_ap device driver will be probed.
+
+ By default, the two masks are set to reserve all APQNs for use by the default
+ AP queue device drivers. There are two ways the default masks can be changed:
+
+ 1. The sysfs mask files can be edited by echoing a string into the
+ respective sysfs mask file in one of two formats:
+
+ * An absolute hex string starting with 0x - like "0x12345678" - sets
+ the mask. If the given string is shorter than the mask, it is padded
+ with 0s on the right; for example, specifying a mask value of 0x41 is
+ the same as specifying:
+
+ 0x4100000000000000000000000000000000000000000000000000000000000000
+
+ Keep in mind that the mask reads from left to right (i.e., most
+ significant to least significant bit in big endian order), so the mask
+ above identifies device numbers 1 and 7 (01000001).
+
+ If the string is longer than the mask, the operation is terminated with
+ an error (EINVAL).
+
+ * Individual bits in the mask can be switched on and off by specifying
+ each bit number to be switched in a comma separated list. Each bit
+ number string must be prepended with a ('+') or minus ('-') to indicate
+ the corresponding bit is to be switched on ('+') or off ('-'). Some
+ valid values are:
+
+ "+0" switches bit 0 on
+ "-13" switches bit 13 off
+ "+0x41" switches bit 65 on
+ "-0xff" switches bit 255 off
+
+ The following example:
+ +0,-6,+0x47,-0xf0
+
+ Switches bits 0 and 71 (0x47) on
+ Switches bits 6 and 240 (0xf0) off
+
+ Note that the bits not specified in the list remain as they were before
+ the operation.
+
+ 2. The masks can also be changed at boot time via parameters on the kernel
+ command line like this:
+
+ ap.apmask=0xffff ap.aqmask=0x40
+
+ This would create the following masks:
+
+ apmask:
+ 0xffff000000000000000000000000000000000000000000000000000000000000
+
+ aqmask:
+ 0x4000000000000000000000000000000000000000000000000000000000000000
+
+ Resulting in these two pools:
+
+ default drivers pool: adapter 0-15, domain 1
+ alternate drivers pool: adapter 16-255, domains 0, 2-255
+
+ Securing the APQNs for our example:
+ ----------------------------------
+ To secure the AP queues 05.0004, 05.0047, 05.00ab, 05.00ff, 06.0004, 06.0047,
+ 06.00ab, and 06.00ff for use by the vfio_ap device driver, the corresponding
+ APQNs can either be removed from the default masks:
+
+ echo -5,-6 > /sys/bus/ap/apmask
+
+ echo -4,-0x47,-0xab,-0xff > /sys/bus/ap/aqmask
+
+ Or the masks can be set as follows:
+
+ echo 0xf9ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
+ > apmask
+
+ echo 0xf7fffffffffffffffeffffffffffffffffffffffffeffffffffffffffffffffe \
+ > aqmask
+
+ This will result in AP queues 05.0004, 05.0047, 05.00ab, 05.00ff, 06.0004,
+ 06.0047, 06.00ab, and 06.00ff getting bound to the vfio_ap device driver. The
+ sysfs directory for the vfio_ap device driver will now contain symbolic links
+ to the AP queue devices bound to it:
+
+ /sys/bus/ap
+ ... [drivers]
+ ...... [vfio_ap]
+ ......... [05.0004]
+ ......... [05.0047]
+ ......... [05.00ab]
+ ......... [05.00ff]
+ ......... [06.0004]
+ ......... [06.0047]
+ ......... [06.00ab]
+ ......... [06.00ff]
+
+ Keep in mind that only type 10 and newer adapters (i.e., CEX4 and later)
+ can be bound to the vfio_ap device driver. The reason for this is to
+ simplify the implementation by not needlessly complicating the design by
+ supporting older devices that will go out of service in the relatively near
+ future and for which there are few older systems on which to test.
+
+ The administrator, therefore, must take care to secure only AP queues that
+ can be bound to the vfio_ap device driver. The device type for a given AP
+ queue device can be read from the parent card's sysfs directory. For example,
+ to see the hardware type of the queue 05.0004:
+
+ cat /sys/bus/ap/devices/card05/hwtype
+
+ The hwtype must be 10 or higher (CEX4 or newer) in order to be bound to the
+ vfio_ap device driver.
+
+3. Create the mediated devices needed to configure the AP matrixes for the
+ three guests and to provide an interface to the vfio_ap driver for
+ use by the guests:
+
+ /sys/devices/vfio_ap/matrix/
+ --- [mdev_supported_types]
+ ------ [vfio_ap-passthrough] (passthrough mediated matrix device type)
+ --------- create
+ --------- [devices]
+
+ To create the mediated devices for the three guests:
+
+ uuidgen > create
+ uuidgen > create
+ uuidgen > create
+
+ or
+
+ echo $uuid1 > create
+ echo $uuid2 > create
+ echo $uuid3 > create
+
+ This will create three mediated devices in the [devices] subdirectory named
+ after the UUID written to the create attribute file. We call them $uuid1,
+ $uuid2 and $uuid3 and this is the sysfs directory structure after creation:
+
+ /sys/devices/vfio_ap/matrix/
+ --- [mdev_supported_types]
+ ------ [vfio_ap-passthrough]
+ --------- [devices]
+ ------------ [$uuid1]
+ --------------- assign_adapter
+ --------------- assign_control_domain
+ --------------- assign_domain
+ --------------- matrix
+ --------------- unassign_adapter
+ --------------- unassign_control_domain
+ --------------- unassign_domain
+
+ ------------ [$uuid2]
+ --------------- assign_adapter
+ --------------- assign_control_domain
+ --------------- assign_domain
+ --------------- matrix
+ --------------- unassign_adapter
+ ----------------unassign_control_domain
+ ----------------unassign_domain
+
+ ------------ [$uuid3]
+ --------------- assign_adapter
+ --------------- assign_control_domain
+ --------------- assign_domain
+ --------------- matrix
+ --------------- unassign_adapter
+ ----------------unassign_control_domain
+ ----------------unassign_domain
+
+4. The administrator now needs to configure the matrixes for the mediated
+ devices $uuid1 (for Guest1), $uuid2 (for Guest2) and $uuid3 (for Guest3).
+
+ This is how the matrix is configured for Guest1:
+
+ echo 5 > assign_adapter
+ echo 6 > assign_adapter
+ echo 4 > assign_domain
+ echo 0xab > assign_domain
+
+ Control domains can similarly be assigned using the assign_control_domain
+ sysfs file.
+
+ If a mistake is made configuring an adapter, domain or control domain,
+ you can use the unassign_xxx files to unassign the adapter, domain or
+ control domain.
+
+ To display the matrix configuration for Guest1:
+
+ cat matrix
+
+ This is how the matrix is configured for Guest2:
+
+ echo 5 > assign_adapter
+ echo 0x47 > assign_domain
+ echo 0xff > assign_domain
+
+ This is how the matrix is configured for Guest3:
+
+ echo 6 > assign_adapter
+ echo 0x47 > assign_domain
+ echo 0xff > assign_domain
+
+ In order to successfully assign an adapter:
+
+ * The adapter number specified must represent a value from 0 up to the
+ maximum adapter number configured for the system. If an adapter number
+ higher than the maximum is specified, the operation will terminate with
+ an error (ENODEV).
+
+ * All APQNs that can be derived from the adapter ID and the IDs of
+ the previously assigned domains must be bound to the vfio_ap device
+ driver. If no domains have yet been assigned, then there must be at least
+ one APQN with the specified APID bound to the vfio_ap driver. If no such
+ APQNs are bound to the driver, the operation will terminate with an
+ error (EADDRNOTAVAIL).
+
+ No APQN that can be derived from the adapter ID and the IDs of the
+ previously assigned domains can be assigned to another mediated matrix
+ device. If an APQN is assigned to another mediated matrix device, the
+ operation will terminate with an error (EADDRINUSE).
+
+ In order to successfully assign a domain:
+
+ * The domain number specified must represent a value from 0 up to the
+ maximum domain number configured for the system. If a domain number
+ higher than the maximum is specified, the operation will terminate with
+ an error (ENODEV).
+
+ * All APQNs that can be derived from the domain ID and the IDs of
+ the previously assigned adapters must be bound to the vfio_ap device
+ driver. If no domains have yet been assigned, then there must be at least
+ one APQN with the specified APQI bound to the vfio_ap driver. If no such
+ APQNs are bound to the driver, the operation will terminate with an
+ error (EADDRNOTAVAIL).
+
+ No APQN that can be derived from the domain ID and the IDs of the
+ previously assigned adapters can be assigned to another mediated matrix
+ device. If an APQN is assigned to another mediated matrix device, the
+ operation will terminate with an error (EADDRINUSE).
+
+ In order to successfully assign a control domain, the domain number
+ specified must represent a value from 0 up to the maximum domain number
+ configured for the system. If a control domain number higher than the maximum
+ is specified, the operation will terminate with an error (ENODEV).
+
+5. Start Guest1:
+
+ /usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on \
+ -device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid1 ...
+
+7. Start Guest2:
+
+ /usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on \
+ -device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid2 ...
+
+7. Start Guest3:
+
+ /usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on \
+ -device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid3 ...
+
+When the guest is shut down, the mediated matrix devices may be removed.
+
+Using our example again, to remove the mediated matrix device $uuid1:
+
+ /sys/devices/vfio_ap/matrix/
+ --- [mdev_supported_types]
+ ------ [vfio_ap-passthrough]
+ --------- [devices]
+ ------------ [$uuid1]
+ --------------- remove
+
+
+ echo 1 > remove
+
+ This will remove all of the mdev matrix device's sysfs structures including
+ the mdev device itself. To recreate and reconfigure the mdev matrix device,
+ all of the steps starting with step 3 will have to be performed again. Note
+ that the remove will fail if a guest using the mdev is still running.
+
+ It is not necessary to remove an mdev matrix device, but one may want to
+ remove it if no guest will use it during the remaining lifetime of the linux
+ host. If the mdev matrix device is removed, one may want to also reconfigure
+ the pool of adapters and queues reserved for use by the default drivers.
+
+Limitations
+===========
+* The KVM/kernel interfaces do not provide a way to prevent restoring an APQN
+ to the default drivers pool of a queue that is still assigned to a mediated
+ device in use by a guest. It is incumbent upon the administrator to
+ ensure there is no mediated device in use by a guest to which the APQN is
+ assigned lest the host be given access to the private data of the AP queue
+ device such as a private key configured specifically for the guest.
+
+* Dynamically modifying the AP matrix for a running guest (which would amount to
+ hot(un)plug of AP devices for the guest) is currently not supported
+
+* Live guest migration is not supported for guests using AP devices.
diff --git a/Documentation/scheduler/00-INDEX b/Documentation/scheduler/00-INDEX
deleted file mode 100644
index eccf7ad2e7f9..000000000000
--- a/Documentation/scheduler/00-INDEX
+++ /dev/null
@@ -1,18 +0,0 @@
-00-INDEX
- - this file.
-sched-arch.txt
- - CPU Scheduler implementation hints for architecture specific code.
-sched-bwc.txt
- - CFS bandwidth control overview.
-sched-design-CFS.txt
- - goals, design and implementation of the Completely Fair Scheduler.
-sched-domains.txt
- - information on scheduling domains.
-sched-nice-design.txt
- - How and why the scheduler's nice levels are implemented.
-sched-rt-group.txt
- - real-time group scheduling.
-sched-deadline.txt
- - deadline scheduling.
-sched-stats.txt
- - information on schedstats (Linux Scheduler Statistics).
diff --git a/Documentation/scheduler/completion.txt b/Documentation/scheduler/completion.txt
index 656cf803c006..e5b9df4d8078 100644
--- a/Documentation/scheduler/completion.txt
+++ b/Documentation/scheduler/completion.txt
@@ -1,146 +1,187 @@
-completions - wait for completion handling
-==========================================
-
-This document was originally written based on 3.18.0 (linux-next)
+Completions - "wait for completion" barrier APIs
+================================================
Introduction:
-------------
-If you have one or more threads of execution that must wait for some process
+If you have one or more threads that must wait for some kernel activity
to have reached a point or a specific state, completions can provide a
race-free solution to this problem. Semantically they are somewhat like a
-pthread_barrier and have similar use-cases.
+pthread_barrier() and have similar use-cases.
Completions are a code synchronization mechanism which is preferable to any
-misuse of locks. Any time you think of using yield() or some quirky
-msleep(1) loop to allow something else to proceed, you probably want to
-look into using one of the wait_for_completion*() calls instead. The
-advantage of using completions is clear intent of the code, but also more
-efficient code as both threads can continue until the result is actually
-needed.
-
-Completions are built on top of the generic event infrastructure in Linux,
-with the event reduced to a simple flag (appropriately called "done") in
-struct completion that tells the waiting threads of execution if they
-can continue safely.
-
-As completions are scheduling related, the code is found in
+misuse of locks/semaphores and busy-loops. Any time you think of using
+yield() or some quirky msleep(1) loop to allow something else to proceed,
+you probably want to look into using one of the wait_for_completion*()
+calls and complete() instead.
+
+The advantage of using completions is that they have a well defined, focused
+purpose which makes it very easy to see the intent of the code, but they
+also result in more efficient code as all threads can continue execution
+until the result is actually needed, and both the waiting and the signalling
+is highly efficient using low level scheduler sleep/wakeup facilities.
+
+Completions are built on top of the waitqueue and wakeup infrastructure of
+the Linux scheduler. The event the threads on the waitqueue are waiting for
+is reduced to a simple flag in 'struct completion', appropriately called "done".
+
+As completions are scheduling related, the code can be found in
kernel/sched/completion.c.
Usage:
------
-There are three parts to using completions, the initialization of the
-struct completion, the waiting part through a call to one of the variants of
-wait_for_completion() and the signaling side through a call to complete()
-or complete_all(). Further there are some helper functions for checking the
-state of completions.
+There are three main parts to using completions:
+
+ - the initialization of the 'struct completion' synchronization object
+ - the waiting part through a call to one of the variants of wait_for_completion(),
+ - the signaling side through a call to complete() or complete_all().
+
+There are also some helper functions for checking the state of completions.
+Note that while initialization must happen first, the waiting and signaling
+part can happen in any order. I.e. it's entirely normal for a thread
+to have marked a completion as 'done' before another thread checks whether
+it has to wait for it.
-To use completions one needs to include <linux/completion.h> and
-create a variable of type struct completion. The structure used for
-handling of completions is:
+To use completions you need to #include <linux/completion.h> and
+create a static or dynamic variable of type 'struct completion',
+which has only two fields:
struct completion {
unsigned int done;
wait_queue_head_t wait;
};
-providing the wait queue to place tasks on for waiting and the flag for
-indicating the state of affairs.
+This provides the ->wait waitqueue to place tasks on for waiting (if any), and
+the ->done completion flag for indicating whether it's completed or not.
-Completions should be named to convey the intent of the waiter. A good
-example is:
+Completions should be named to refer to the event that is being synchronized on.
+A good example is:
wait_for_completion(&early_console_added);
complete(&early_console_added);
-Good naming (as always) helps code readability.
+Good, intuitive naming (as always) helps code readability. Naming a completion
+'complete' is not helpful unless the purpose is super obvious...
Initializing completions:
-------------------------
-Initialization of dynamically allocated completions, often embedded in
-other structures, is done with:
+Dynamically allocated completion objects should preferably be embedded in data
+structures that are assured to be alive for the life-time of the function/driver,
+to prevent races with asynchronous complete() calls from occurring.
+
+Particular care should be taken when using the _timeout() or _killable()/_interruptible()
+variants of wait_for_completion(), as it must be assured that memory de-allocation
+does not happen until all related activities (complete() or reinit_completion())
+have taken place, even if these wait functions return prematurely due to a timeout
+or a signal triggering.
+
+Initializing of dynamically allocated completion objects is done via a call to
+init_completion():
- void init_completion(&done);
+ init_completion(&dynamic_object->done);
-Initialization is accomplished by initializing the wait queue and setting
-the default state to "not available", that is, "done" is set to 0.
+In this call we initialize the waitqueue and set ->done to 0, i.e. "not completed"
+or "not done".
The re-initialization function, reinit_completion(), simply resets the
-done element to "not available", thus again to 0, without touching the
-wait queue. Calling init_completion() twice on the same completion object is
+->done field to 0 ("not done"), without touching the waitqueue.
+Callers of this function must make sure that there are no racy
+wait_for_completion() calls going on in parallel.
+
+Calling init_completion() on the same completion object twice is
most likely a bug as it re-initializes the queue to an empty queue and
-enqueued tasks could get "lost" - use reinit_completion() in that case.
+enqueued tasks could get "lost" - use reinit_completion() in that case,
+but be aware of other races.
+
+For static declaration and initialization, macros are available.
+
+For static (or global) declarations in file scope you can use DECLARE_COMPLETION():
-For static declaration and initialization, macros are available. These are:
+ static DECLARE_COMPLETION(setup_done);
+ DECLARE_COMPLETION(setup_done);
- static DECLARE_COMPLETION(setup_done)
+Note that in this case the completion is boot time (or module load time)
+initialized to 'not done' and doesn't require an init_completion() call.
-used for static declarations in file scope. Within functions the static
-initialization should always use:
+When a completion is declared as a local variable within a function,
+then the initialization should always use DECLARE_COMPLETION_ONSTACK()
+explicitly, not just to make lockdep happy, but also to make it clear
+that limited scope had been considered and is intentional:
DECLARE_COMPLETION_ONSTACK(setup_done)
-suitable for automatic/local variables on the stack and will make lockdep
-happy. Note also that one needs to make *sure* the completion passed to
-work threads remains in-scope, and no references remain to on-stack data
-when the initiating function returns.
+Note that when using completion objects as local variables you must be
+acutely aware of the short life time of the function stack: the function
+must not return to a calling context until all activities (such as waiting
+threads) have ceased and the completion object is completely unused.
-Using on-stack completions for code that calls any of the _timeout or
-_interruptible/_killable variants is not advisable as they will require
-additional synchronization to prevent the on-stack completion object in
-the timeout/signal cases from going out of scope. Consider using dynamically
-allocated completions when intending to use the _interruptible/_killable
-or _timeout variants of wait_for_completion().
+To emphasise this again: in particular when using some of the waiting API variants
+with more complex outcomes, such as the timeout or signalling (_timeout(),
+_killable() and _interruptible()) variants, the wait might complete
+prematurely while the object might still be in use by another thread - and a return
+from the wait_on_completion*() caller function will deallocate the function
+stack and cause subtle data corruption if a complete() is done in some
+other thread. Simple testing might not trigger these kinds of races.
+If unsure, use dynamically allocated completion objects, preferably embedded
+in some other long lived object that has a boringly long life time which
+exceeds the life time of any helper threads using the completion object,
+or has a lock or other synchronization mechanism to make sure complete()
+is not called on a freed object.
+
+A naive DECLARE_COMPLETION() on the stack triggers a lockdep warning.
Waiting for completions:
------------------------
-For a thread of execution to wait for some concurrent work to finish, it
-calls wait_for_completion() on the initialized completion structure.
+For a thread to wait for some concurrent activity to finish, it
+calls wait_for_completion() on the initialized completion structure:
+
+ void wait_for_completion(struct completion *done)
+
A typical usage scenario is:
+ CPU#1 CPU#2
+
struct completion setup_done;
+
init_completion(&setup_done);
- initialize_work(...,&setup_done,...)
+ initialize_work(...,&setup_done,...);
- /* run non-dependent code */ /* do setup */
+ /* run non-dependent code */ /* do setup */
- wait_for_completion(&setup_done); complete(setup_done)
+ wait_for_completion(&setup_done); complete(setup_done);
-This is not implying any temporal order on wait_for_completion() and the
-call to complete() - if the call to complete() happened before the call
+This is not implying any particular order between wait_for_completion() and
+the call to complete() - if the call to complete() happened before the call
to wait_for_completion() then the waiting side simply will continue
-immediately as all dependencies are satisfied if not it will block until
+immediately as all dependencies are satisfied; if not, it will block until
completion is signaled by complete().
Note that wait_for_completion() is calling spin_lock_irq()/spin_unlock_irq(),
so it can only be called safely when you know that interrupts are enabled.
-Calling it from hard-irq or irqs-off atomic contexts will result in
-hard-to-detect spurious enabling of interrupts.
-
-wait_for_completion():
-
- void wait_for_completion(struct completion *done):
+Calling it from IRQs-off atomic contexts will result in hard-to-detect
+spurious enabling of interrupts.
The default behavior is to wait without a timeout and to mark the task as
uninterruptible. wait_for_completion() and its variants are only safe
in process context (as they can sleep) but not in atomic context,
-interrupt context, with disabled irqs. or preemption is disabled - see also
+interrupt context, with disabled IRQs, or preemption is disabled - see also
try_wait_for_completion() below for handling completion in atomic/interrupt
context.
As all variants of wait_for_completion() can (obviously) block for a long
-time, you probably don't want to call this with held mutexes.
+time depending on the nature of the activity they are waiting for, so in
+most cases you probably don't want to call this with held mutexes.
-Variants available:
--------------------
+wait_for_completion*() variants available:
+------------------------------------------
The below variants all return status and this status should be checked in
most(/all) cases - in cases where the status is deliberately not checked you
@@ -148,51 +189,53 @@ probably want to make a note explaining this (e.g. see
arch/arm/kernel/smp.c:__cpu_up()).
A common problem that occurs is to have unclean assignment of return types,
-so care should be taken with assigning return-values to variables of proper
-type. Checking for the specific meaning of return values also has been found
-to be quite inaccurate e.g. constructs like
-if (!wait_for_completion_interruptible_timeout(...)) would execute the same
-code path for successful completion and for the interrupted case - which is
-probably not what you want.
+so take care to assign return-values to variables of the proper type.
+
+Checking for the specific meaning of return values also has been found
+to be quite inaccurate, e.g. constructs like:
+
+ if (!wait_for_completion_interruptible_timeout(...))
+
+... would execute the same code path for successful completion and for the
+interrupted case - which is probably not what you want.
int wait_for_completion_interruptible(struct completion *done)
-This function marks the task TASK_INTERRUPTIBLE. If a signal was received
-while waiting it will return -ERESTARTSYS; 0 otherwise.
+This function marks the task TASK_INTERRUPTIBLE while it is waiting.
+If a signal was received while waiting it will return -ERESTARTSYS; 0 otherwise.
- unsigned long wait_for_completion_timeout(struct completion *done,
- unsigned long timeout)
+ unsigned long wait_for_completion_timeout(struct completion *done, unsigned long timeout)
The task is marked as TASK_UNINTERRUPTIBLE and will wait at most 'timeout'
-(in jiffies). If timeout occurs it returns 0 else the remaining time in
-jiffies (but at least 1). Timeouts are preferably calculated with
-msecs_to_jiffies() or usecs_to_jiffies(). If the returned timeout value is
-deliberately ignored a comment should probably explain why (e.g. see
-drivers/mfd/wm8350-core.c wm8350_read_auxadc())
+jiffies. If a timeout occurs it returns 0, else the remaining time in
+jiffies (but at least 1).
+
+Timeouts are preferably calculated with msecs_to_jiffies() or usecs_to_jiffies(),
+to make the code largely HZ-invariant.
+
+If the returned timeout value is deliberately ignored a comment should probably explain
+why (e.g. see drivers/mfd/wm8350-core.c wm8350_read_auxadc()).
- long wait_for_completion_interruptible_timeout(
- struct completion *done, unsigned long timeout)
+ long wait_for_completion_interruptible_timeout(struct completion *done, unsigned long timeout)
This function passes a timeout in jiffies and marks the task as
TASK_INTERRUPTIBLE. If a signal was received it will return -ERESTARTSYS;
-otherwise it returns 0 if the completion timed out or the remaining time in
+otherwise it returns 0 if the completion timed out, or the remaining time in
jiffies if completion occurred.
Further variants include _killable which uses TASK_KILLABLE as the
-designated tasks state and will return -ERESTARTSYS if it is interrupted or
-else 0 if completion was achieved. There is a _timeout variant as well:
+designated tasks state and will return -ERESTARTSYS if it is interrupted,
+or 0 if completion was achieved. There is a _timeout variant as well:
long wait_for_completion_killable(struct completion *done)
- long wait_for_completion_killable_timeout(struct completion *done,
- unsigned long timeout)
+ long wait_for_completion_killable_timeout(struct completion *done, unsigned long timeout)
The _io variants wait_for_completion_io() behave the same as the non-_io
-variants, except for accounting waiting time as waiting on IO, which has
-an impact on how the task is accounted in scheduling stats.
+variants, except for accounting waiting time as 'waiting on IO', which has
+an impact on how the task is accounted in scheduling/IO stats:
void wait_for_completion_io(struct completion *done)
- unsigned long wait_for_completion_io_timeout(struct completion *done
- unsigned long timeout)
+ unsigned long wait_for_completion_io_timeout(struct completion *done, unsigned long timeout)
Signaling completions:
@@ -200,31 +243,32 @@ Signaling completions:
A thread that wants to signal that the conditions for continuation have been
achieved calls complete() to signal exactly one of the waiters that it can
-continue.
+continue:
void complete(struct completion *done)
-or calls complete_all() to signal all current and future waiters.
+... or calls complete_all() to signal all current and future waiters:
void complete_all(struct completion *done)
The signaling will work as expected even if completions are signaled before
a thread starts waiting. This is achieved by the waiter "consuming"
-(decrementing) the done element of struct completion. Waiting threads
+(decrementing) the done field of 'struct completion'. Waiting threads
wakeup order is the same in which they were enqueued (FIFO order).
If complete() is called multiple times then this will allow for that number
of waiters to continue - each call to complete() will simply increment the
-done element. Calling complete_all() multiple times is a bug though. Both
-complete() and complete_all() can be called in hard-irq/atomic context safely.
+done field. Calling complete_all() multiple times is a bug though. Both
+complete() and complete_all() can be called in IRQ/atomic context safely.
-There only can be one thread calling complete() or complete_all() on a
-particular struct completion at any time - serialized through the wait
+There can only be one thread calling complete() or complete_all() on a
+particular 'struct completion' at any time - serialized through the wait
queue spinlock. Any such concurrent calls to complete() or complete_all()
probably are a design bug.
-Signaling completion from hard-irq context is fine as it will appropriately
-lock with spin_lock_irqsave/spin_unlock_irqrestore and it will never sleep.
+Signaling completion from IRQ context is fine as it will appropriately
+lock with spin_lock_irqsave()/spin_unlock_irqrestore() and it will never
+sleep.
try_wait_for_completion()/completion_done():
@@ -236,7 +280,7 @@ else it consumes one posted completion and returns true.
bool try_wait_for_completion(struct completion *done)
-Finally, to check the state of a completion without changing it in any way,
+Finally, to check the state of a completion without changing it in any way,
call completion_done(), which returns false if there are no posted
completions that were not yet consumed by waiters (implying that there are
waiters) and true otherwise;
@@ -244,4 +288,4 @@ waiters) and true otherwise;
bool completion_done(struct completion *done)
Both try_wait_for_completion() and completion_done() are safe to be called in
-hard-irq or atomic context.
+IRQ or atomic context.
diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX
deleted file mode 100644
index bb4a76f823e1..000000000000
--- a/Documentation/scsi/00-INDEX
+++ /dev/null
@@ -1,108 +0,0 @@
-00-INDEX
- - this file
-53c700.txt
- - info on driver for 53c700 based adapters
-BusLogic.txt
- - info on driver for adapters with BusLogic chips
-ChangeLog.1992-1997
- - Changes to scsi files, if not listed elsewhere
-ChangeLog.arcmsr
- - Changes to driver for ARECA's SATA RAID controller cards
-ChangeLog.ips
- - IBM ServeRAID driver Changelog
-ChangeLog.lpfc
- - Changes to lpfc driver
-ChangeLog.megaraid
- - Changes to LSI megaraid controller.
-ChangeLog.megaraid_sas
- - Changes to serial attached scsi version of LSI megaraid controller.
-ChangeLog.ncr53c8xx
- - Changes to ncr53c8xx driver
-ChangeLog.sym53c8xx
- - Changes to sym53c8xx driver
-ChangeLog.sym53c8xx_2
- - Changes to second generation of sym53c8xx driver
-FlashPoint.txt
- - info on driver for BusLogic FlashPoint adapters
-LICENSE.FlashPoint
- - Licence of the Flashpoint driver
-LICENSE.qla2xxx
- - License for QLogic Linux Fibre Channel HBA Driver firmware.
-LICENSE.qla4xxx
- - License for QLogic Linux iSCSI HBA Driver.
-Mylex.txt
- - info on driver for Mylex adapters
-NinjaSCSI.txt
- - info on WorkBiT NinjaSCSI-32/32Bi driver
-aacraid.txt
- - Driver supporting Adaptec RAID controllers
-advansys.txt
- - List of Advansys Host Adapters
-aha152x.txt
- - info on driver for Adaptec AHA152x based adapters
-aic79xx.txt
- - Adaptec Ultra320 SCSI host adapters
-aic7xxx.txt
- - info on driver for Adaptec controllers
-arcmsr_spec.txt
- - ARECA FIRMWARE SPEC (for IOP331 adapter)
-bfa.txt
- - Brocade FC/FCOE adapter driver.
-bnx2fc.txt
- - FCoE hardware offload for Broadcom network interfaces.
-cxgb3i.txt
- - Chelsio iSCSI Linux Driver
-dc395x.txt
- - README file for the dc395x SCSI driver
-dpti.txt
- - info on driver for DPT SmartRAID and Adaptec I2O RAID based adapters
-dtc3x80.txt
- - info on driver for DTC 2x80 based adapters
-g_NCR5380.txt
- - info on driver for NCR5380 and NCR53c400 based adapters
-hpsa.txt
- - HP Smart Array Controller SCSI driver.
-hptiop.txt
- - HIGHPOINT ROCKETRAID 3xxx RAID DRIVER
-libsas.txt
- - Serial Attached SCSI management layer.
-link_power_management_policy.txt
- - Link power management options.
-lpfc.txt
- - LPFC driver release notes
-megaraid.txt
- - Common Management Module, shared code handling ioctls for LSI drivers
-ncr53c8xx.txt
- - info on driver for NCR53c8xx based adapters
-osd.txt
- Object-Based Storage Device, command set introduction.
-osst.txt
- - info on driver for OnStream SC-x0 SCSI tape
-ppa.txt
- - info on driver for IOmega zip drive
-qlogicfas.txt
- - info on driver for QLogic FASxxx based adapters
-scsi-changer.txt
- - README for the SCSI media changer driver
-scsi-generic.txt
- - info on the sg driver for generic (non-disk/CD/tape) SCSI devices.
-scsi-parameters.txt
- - List of SCSI-parameters to pass to the kernel at module load-time.
-scsi.txt
- - short blurb on using SCSI support as a module.
-scsi_mid_low_api.txt
- - info on API between SCSI layer and low level drivers
-scsi_eh.txt
- - info on SCSI midlayer error handling infrastructure
-scsi_fc_transport.txt
- - SCSI Fiber Channel Tansport
-st.txt
- - info on scsi tape driver
-sym53c500_cs.txt
- - info on PCMCIA driver for Symbios Logic 53c500 based adapters
-sym53c8xx_2.txt
- - info on second generation driver for sym53c8xx based adapters
-tmscsim.txt
- - info on driver for AM53c974 based adapters
-ufs.txt
- - info on Universal Flash Storage(UFS) and UFS host controller driver.
diff --git a/Documentation/scsi/ufs.txt b/Documentation/scsi/ufs.txt
index 41a6164592aa..520b5b033256 100644
--- a/Documentation/scsi/ufs.txt
+++ b/Documentation/scsi/ufs.txt
@@ -128,6 +128,26 @@ The current UFSHCD implementation supports following functionality,
In this version of UFSHCD Query requests and power management
functionality are not implemented.
+4. BSG Support
+------------------
+
+This transport driver supports exchanging UFS protocol information units
+(UPIUs) with a UFS device. Typically, user space will allocate
+struct ufs_bsg_request and struct ufs_bsg_reply (see ufs_bsg.h) as
+request_upiu and reply_upiu respectively. Filling those UPIUs should
+be done in accordance with JEDEC spec UFS2.1 paragraph 10.7.
+*Caveat emptor*: The driver makes no further input validations and sends the
+UPIU to the device as it is. Open the bsg device in /dev/ufs-bsg and
+send SG_IO with the applicable sg_io_v4:
+
+ io_hdr_v4.guard = 'Q';
+ io_hdr_v4.protocol = BSG_PROTOCOL_SCSI;
+ io_hdr_v4.subprotocol = BSG_SUB_PROTOCOL_SCSI_TRANSPORT;
+ io_hdr_v4.response = (__u64)reply_upiu;
+ io_hdr_v4.max_response_len = reply_len;
+ io_hdr_v4.request_len = request_len;
+ io_hdr_v4.request = (__u64)request_upiu;
+
UFS Specifications can be found at,
UFS - http://www.jedec.org/sites/default/files/docs/JESD220.pdf
UFSHCI - http://www.jedec.org/sites/default/files/docs/JESD223.pdf
diff --git a/Documentation/security/LSM.rst b/Documentation/security/LSM.rst
index 98522e0e1ee2..8b9ee597e9d0 100644
--- a/Documentation/security/LSM.rst
+++ b/Documentation/security/LSM.rst
@@ -5,7 +5,7 @@ Linux Security Module Development
Based on https://lkml.org/lkml/2007/10/26/215,
a new LSM is accepted into the kernel when its intent (a description of
what it tries to protect against and in what cases one would expect to
-use it) has been appropriately documented in ``Documentation/security/LSM.rst``.
+use it) has been appropriately documented in ``Documentation/admin-guide/LSM/``.
This allows an LSM's code to be easily compared to its goals, and so
that end users and distros can make a more informed decision about which
LSMs suit their requirements.
diff --git a/Documentation/security/keys/core.rst b/Documentation/security/keys/core.rst
index 9ce7256c6edb..9521c4207f01 100644
--- a/Documentation/security/keys/core.rst
+++ b/Documentation/security/keys/core.rst
@@ -859,6 +859,7 @@ The keyctl syscall functions are:
and either the buffer length or the OtherInfo length exceeds the
allowed length.
+
* Restrict keyring linkage::
long keyctl(KEYCTL_RESTRICT_KEYRING, key_serial_t keyring,
@@ -890,6 +891,116 @@ The keyctl syscall functions are:
applicable to the asymmetric key type.
+ * Query an asymmetric key::
+
+ long keyctl(KEYCTL_PKEY_QUERY,
+ key_serial_t key_id, unsigned long reserved,
+ struct keyctl_pkey_query *info);
+
+ Get information about an asymmetric key. The information is returned in
+ the keyctl_pkey_query struct::
+
+ __u32 supported_ops;
+ __u32 key_size;
+ __u16 max_data_size;
+ __u16 max_sig_size;
+ __u16 max_enc_size;
+ __u16 max_dec_size;
+ __u32 __spare[10];
+
+ ``supported_ops`` contains a bit mask of flags indicating which ops are
+ supported. This is constructed from a bitwise-OR of::
+
+ KEYCTL_SUPPORTS_{ENCRYPT,DECRYPT,SIGN,VERIFY}
+
+ ``key_size`` indicated the size of the key in bits.
+
+ ``max_*_size`` indicate the maximum sizes in bytes of a blob of data to be
+ signed, a signature blob, a blob to be encrypted and a blob to be
+ decrypted.
+
+ ``__spare[]`` must be set to 0. This is intended for future use to hand
+ over one or more passphrases needed unlock a key.
+
+ If successful, 0 is returned. If the key is not an asymmetric key,
+ EOPNOTSUPP is returned.
+
+
+ * Encrypt, decrypt, sign or verify a blob using an asymmetric key::
+
+ long keyctl(KEYCTL_PKEY_ENCRYPT,
+ const struct keyctl_pkey_params *params,
+ const char *info,
+ const void *in,
+ void *out);
+
+ long keyctl(KEYCTL_PKEY_DECRYPT,
+ const struct keyctl_pkey_params *params,
+ const char *info,
+ const void *in,
+ void *out);
+
+ long keyctl(KEYCTL_PKEY_SIGN,
+ const struct keyctl_pkey_params *params,
+ const char *info,
+ const void *in,
+ void *out);
+
+ long keyctl(KEYCTL_PKEY_VERIFY,
+ const struct keyctl_pkey_params *params,
+ const char *info,
+ const void *in,
+ const void *in2);
+
+ Use an asymmetric key to perform a public-key cryptographic operation a
+ blob of data. For encryption and verification, the asymmetric key may
+ only need the public parts to be available, but for decryption and signing
+ the private parts are required also.
+
+ The parameter block pointed to by params contains a number of integer
+ values::
+
+ __s32 key_id;
+ __u32 in_len;
+ __u32 out_len;
+ __u32 in2_len;
+
+ ``key_id`` is the ID of the asymmetric key to be used. ``in_len`` and
+ ``in2_len`` indicate the amount of data in the in and in2 buffers and
+ ``out_len`` indicates the size of the out buffer as appropriate for the
+ above operations.
+
+ For a given operation, the in and out buffers are used as follows::
+
+ Operation ID in,in_len out,out_len in2,in2_len
+ ======================= =============== =============== ===============
+ KEYCTL_PKEY_ENCRYPT Raw data Encrypted data -
+ KEYCTL_PKEY_DECRYPT Encrypted data Raw data -
+ KEYCTL_PKEY_SIGN Raw data Signature -
+ KEYCTL_PKEY_VERIFY Raw data - Signature
+
+ ``info`` is a string of key=value pairs that supply supplementary
+ information. These include:
+
+ ``enc=<encoding>`` The encoding of the encrypted/signature blob. This
+ can be "pkcs1" for RSASSA-PKCS1-v1.5 or
+ RSAES-PKCS1-v1.5; "pss" for "RSASSA-PSS"; "oaep" for
+ "RSAES-OAEP". If omitted or is "raw", the raw output
+ of the encryption function is specified.
+
+ ``hash=<algo>`` If the data buffer contains the output of a hash
+ function and the encoding includes some indication of
+ which hash function was used, the hash function can be
+ specified with this, eg. "hash=sha256".
+
+ The ``__spare[]`` space in the parameter block must be set to 0. This is
+ intended, amongst other things, to allow the passing of passphrases
+ required to unlock a key.
+
+ If successful, encrypt, decrypt and sign all return the amount of data
+ written into the output buffer. Verification returns 0 on success.
+
+
Kernel Services
===============
@@ -1483,6 +1594,112 @@ The structure has a number of fields, some of which are mandatory:
attempted key link operation. If there is no match, -EINVAL is returned.
+ * ``int (*asym_eds_op)(struct kernel_pkey_params *params,
+ const void *in, void *out);``
+ ``int (*asym_verify_signature)(struct kernel_pkey_params *params,
+ const void *in, const void *in2);``
+
+ These methods are optional. If provided the first allows a key to be
+ used to encrypt, decrypt or sign a blob of data, and the second allows a
+ key to verify a signature.
+
+ In all cases, the following information is provided in the params block::
+
+ struct kernel_pkey_params {
+ struct key *key;
+ const char *encoding;
+ const char *hash_algo;
+ char *info;
+ __u32 in_len;
+ union {
+ __u32 out_len;
+ __u32 in2_len;
+ };
+ enum kernel_pkey_operation op : 8;
+ };
+
+ This includes the key to be used; a string indicating the encoding to use
+ (for instance, "pkcs1" may be used with an RSA key to indicate
+ RSASSA-PKCS1-v1.5 or RSAES-PKCS1-v1.5 encoding or "raw" if no encoding);
+ the name of the hash algorithm used to generate the data for a signature
+ (if appropriate); the sizes of the input and output (or second input)
+ buffers; and the ID of the operation to be performed.
+
+ For a given operation ID, the input and output buffers are used as
+ follows::
+
+ Operation ID in,in_len out,out_len in2,in2_len
+ ======================= =============== =============== ===============
+ kernel_pkey_encrypt Raw data Encrypted data -
+ kernel_pkey_decrypt Encrypted data Raw data -
+ kernel_pkey_sign Raw data Signature -
+ kernel_pkey_verify Raw data - Signature
+
+ asym_eds_op() deals with encryption, decryption and signature creation as
+ specified by params->op. Note that params->op is also set for
+ asym_verify_signature().
+
+ Encrypting and signature creation both take raw data in the input buffer
+ and return the encrypted result in the output buffer. Padding may have
+ been added if an encoding was set. In the case of signature creation,
+ depending on the encoding, the padding created may need to indicate the
+ digest algorithm - the name of which should be supplied in hash_algo.
+
+ Decryption takes encrypted data in the input buffer and returns the raw
+ data in the output buffer. Padding will get checked and stripped off if
+ an encoding was set.
+
+ Verification takes raw data in the input buffer and the signature in the
+ second input buffer and checks that the one matches the other. Padding
+ will be validated. Depending on the encoding, the digest algorithm used
+ to generate the raw data may need to be indicated in hash_algo.
+
+ If successful, asym_eds_op() should return the number of bytes written
+ into the output buffer. asym_verify_signature() should return 0.
+
+ A variety of errors may be returned, including EOPNOTSUPP if the operation
+ is not supported; EKEYREJECTED if verification fails; ENOPKG if the
+ required crypto isn't available.
+
+
+ * ``int (*asym_query)(const struct kernel_pkey_params *params,
+ struct kernel_pkey_query *info);``
+
+ This method is optional. If provided it allows information about the
+ public or asymmetric key held in the key to be determined.
+
+ The parameter block is as for asym_eds_op() and co. but in_len and out_len
+ are unused. The encoding and hash_algo fields should be used to reduce
+ the returned buffer/data sizes as appropriate.
+
+ If successful, the following information is filled in::
+
+ struct kernel_pkey_query {
+ __u32 supported_ops;
+ __u32 key_size;
+ __u16 max_data_size;
+ __u16 max_sig_size;
+ __u16 max_enc_size;
+ __u16 max_dec_size;
+ };
+
+ The supported_ops field will contain a bitmask indicating what operations
+ are supported by the key, including encryption of a blob, decryption of a
+ blob, signing a blob and verifying the signature on a blob. The following
+ constants are defined for this::
+
+ KEYCTL_SUPPORTS_{ENCRYPT,DECRYPT,SIGN,VERIFY}
+
+ The key_size field is the size of the key in bits. max_data_size and
+ max_sig_size are the maximum raw data and signature sizes for creation and
+ verification of a signature; max_enc_size and max_dec_size are the maximum
+ raw data and signature sizes for encryption and decryption. The
+ max_*_size fields are measured in bytes.
+
+ If successful, 0 will be returned. If the key doesn't support this,
+ EOPNOTSUPP will be returned.
+
+
Request-Key Callback Service
============================
diff --git a/Documentation/security/keys/ecryptfs.rst b/Documentation/security/keys/ecryptfs.rst
index 4920f3a8ea75..0e2be0a6bb6a 100644
--- a/Documentation/security/keys/ecryptfs.rst
+++ b/Documentation/security/keys/ecryptfs.rst
@@ -5,10 +5,10 @@ Encrypted keys for the eCryptfs filesystem
ECryptfs is a stacked filesystem which transparently encrypts and decrypts each
file using a randomly generated File Encryption Key (FEK).
-Each FEK is in turn encrypted with a File Encryption Key Encryption Key (FEFEK)
+Each FEK is in turn encrypted with a File Encryption Key Encryption Key (FEKEK)
either in kernel space or in user space with a daemon called 'ecryptfsd'. In
the former case the operation is performed directly by the kernel CryptoAPI
-using a key, the FEFEK, derived from a user prompted passphrase; in the latter
+using a key, the FEKEK, derived from a user prompted passphrase; in the latter
the FEK is encrypted by 'ecryptfsd' with the help of external libraries in order
to support other mechanisms like public key cryptography, PKCS#11 and TPM based
operations.
@@ -22,12 +22,12 @@ by the userspace utility 'mount.ecryptfs' shipped with the package
The 'encrypted' key type has been extended with the introduction of the new
format 'ecryptfs' in order to be used in conjunction with the eCryptfs
filesystem. Encrypted keys of the newly introduced format store an
-authentication token in its payload with a FEFEK randomly generated by the
+authentication token in its payload with a FEKEK randomly generated by the
kernel and protected by the parent master key.
In order to avoid known-plaintext attacks, the datablob obtained through
commands 'keyctl print' or 'keyctl pipe' does not contain the overall
-authentication token, which content is well known, but only the FEFEK in
+authentication token, which content is well known, but only the FEKEK in
encrypted form.
The eCryptfs filesystem may really benefit from using encrypted keys in that the
diff --git a/Documentation/security/self-protection.rst b/Documentation/security/self-protection.rst
index e1ca698e0006..f584fb74b4ff 100644
--- a/Documentation/security/self-protection.rst
+++ b/Documentation/security/self-protection.rst
@@ -302,11 +302,11 @@ sure structure holes are cleared.
Memory poisoning
----------------
-When releasing memory, it is best to poison the contents (clear stack on
-syscall return, wipe heap memory on a free), to avoid reuse attacks that
-rely on the old contents of memory. This frustrates many uninitialized
-variable attacks, stack content exposures, heap content exposures, and
-use-after-free attacks.
+When releasing memory, it is best to poison the contents, to avoid reuse
+attacks that rely on the old contents of memory. E.g., clear stack on a
+syscall return (``CONFIG_GCC_PLUGIN_STACKLEAK``), wipe heap memory on a
+free. This frustrates many uninitialized variable attacks, stack content
+exposures, heap content exposures, and use-after-free attacks.
Destination tracking
--------------------
diff --git a/Documentation/serial/00-INDEX b/Documentation/serial/00-INDEX
deleted file mode 100644
index 8021a9f29fc5..000000000000
--- a/Documentation/serial/00-INDEX
+++ /dev/null
@@ -1,16 +0,0 @@
-00-INDEX
- - this file.
-README.cycladesZ
- - info on Cyclades-Z firmware loading.
-driver
- - intro to the low level serial driver.
-moxa-smartio
- - file with info on installing/using Moxa multiport serial driver.
-n_gsm.txt
- - GSM 0710 tty multiplexer howto.
-rocket.txt
- - info on the Comtrol RocketPort multiport serial driver.
-serial-rs485.txt
- - info about RS485 structures and support in the kernel.
-tty.txt
- - guide to the locking policies of the tty layer.
diff --git a/Documentation/serial/driver b/Documentation/serial/driver
index da193e092fc3..86e47c19a924 100644
--- a/Documentation/serial/driver
+++ b/Documentation/serial/driver
@@ -7,7 +7,7 @@ This document is meant as a brief overview of some aspects of the new serial
driver. It is not complete, any questions you have should be directed to
<rmk@arm.linux.org.uk>
-The reference implementation is contained within amba_pl011.c.
+The reference implementation is contained within amba-pl011.c.
diff --git a/Documentation/serial/serial-iso7816.txt b/Documentation/serial/serial-iso7816.txt
new file mode 100644
index 000000000000..3193d24a2b0f
--- /dev/null
+++ b/Documentation/serial/serial-iso7816.txt
@@ -0,0 +1,83 @@
+ ISO7816 SERIAL COMMUNICATIONS
+
+1. INTRODUCTION
+
+ ISO/IEC7816 is a series of standards specifying integrated circuit cards (ICC)
+ also known as smart cards.
+
+2. HARDWARE-RELATED CONSIDERATIONS
+
+ Some CPUs/UARTs (e.g., Microchip AT91) contain a built-in mode capable of
+ handling communication with a smart card.
+
+ For these microcontrollers, the Linux driver should be made capable of
+ working in both modes, and proper ioctls (see later) should be made
+ available at user-level to allow switching from one mode to the other, and
+ vice versa.
+
+3. DATA STRUCTURES ALREADY AVAILABLE IN THE KERNEL
+
+ The Linux kernel provides the serial_iso7816 structure (see [1]) to handle
+ ISO7816 communications. This data structure is used to set and configure
+ ISO7816 parameters in ioctls.
+
+ Any driver for devices capable of working both as RS232 and ISO7816 should
+ implement the iso7816_config callback in the uart_port structure. The
+ serial_core calls iso7816_config to do the device specific part in response
+ to TIOCGISO7816 and TIOCSISO7816 ioctls (see below). The iso7816_config
+ callback receives a pointer to struct serial_iso7816.
+
+4. USAGE FROM USER-LEVEL
+
+ From user-level, ISO7816 configuration can be get/set using the previous
+ ioctls. For instance, to set ISO7816 you can use the following code:
+
+ #include <linux/serial.h>
+
+ /* Include definition for ISO7816 ioctls: TIOCSISO7816 and TIOCGISO7816 */
+ #include <sys/ioctl.h>
+
+ /* Open your specific device (e.g., /dev/mydevice): */
+ int fd = open ("/dev/mydevice", O_RDWR);
+ if (fd < 0) {
+ /* Error handling. See errno. */
+ }
+
+ struct serial_iso7816 iso7816conf;
+
+ /* Reserved fields as to be zeroed */
+ memset(&iso7816conf, 0, sizeof(iso7816conf));
+
+ /* Enable ISO7816 mode: */
+ iso7816conf.flags |= SER_ISO7816_ENABLED;
+
+ /* Select the protocol: */
+ /* T=0 */
+ iso7816conf.flags |= SER_ISO7816_T(0);
+ /* or T=1 */
+ iso7816conf.flags |= SER_ISO7816_T(1);
+
+ /* Set the guard time: */
+ iso7816conf.tg = 2;
+
+ /* Set the clock frequency*/
+ iso7816conf.clk = 3571200;
+
+ /* Set transmission factors: */
+ iso7816conf.sc_fi = 372;
+ iso7816conf.sc_di = 1;
+
+ if (ioctl(fd_usart, TIOCSISO7816, &iso7816conf) < 0) {
+ /* Error handling. See errno. */
+ }
+
+ /* Use read() and write() syscalls here... */
+
+ /* Close the device when finished: */
+ if (close (fd) < 0) {
+ /* Error handling. See errno. */
+ }
+
+5. REFERENCES
+
+ [1] include/uapi/linux/serial.h
diff --git a/Documentation/sound/hd-audio/models.rst b/Documentation/sound/hd-audio/models.rst
index e06238131f77..368a07a165f5 100644
--- a/Documentation/sound/hd-audio/models.rst
+++ b/Documentation/sound/hd-audio/models.rst
@@ -309,6 +309,8 @@ asus-nx50
ASUS Nx50 fixups
asus-nx51
ASUS Nx51 fixups
+asus-g751
+ ASUS G751 fixups
alc891-headset
Headset mode support on ALC891
alc891-headset-multi
diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
index a0b268466cb1..b37234afdfa1 100644
--- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
+++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
@@ -3,8 +3,6 @@ Writing an ALSA Driver
======================
:Author: Takashi Iwai <tiwai@suse.de>
-:Date: Oct 15, 2007
-:Edition: 0.3.7
Preface
=======
@@ -21,11 +19,6 @@ explain the general topic of linux kernel coding and doesn't cover
low-level driver implementation details. It only describes the standard
way to write a PCI sound driver on ALSA.
-If you are already familiar with the older ALSA ver.0.5.x API, you can
-check the drivers such as ``sound/pci/es1938.c`` or
-``sound/pci/maestro3.c`` which have also almost the same code-base in
-the ALSA 0.5.x tree, so you can compare the differences.
-
This document is still a draft version. Any feedback and corrections,
please!!
@@ -35,24 +28,7 @@ File Tree Structure
General
-------
-The ALSA drivers are provided in two ways.
-
-One is the trees provided as a tarball or via cvs from the ALSA's ftp
-site, and another is the 2.6 (or later) Linux kernel tree. To
-synchronize both, the ALSA driver tree is split into two different
-trees: alsa-kernel and alsa-driver. The former contains purely the
-source code for the Linux 2.6 (or later) tree. This tree is designed
-only for compilation on 2.6 or later environment. The latter,
-alsa-driver, contains many subtle files for compiling ALSA drivers
-outside of the Linux kernel tree, wrapper functions for older 2.2 and
-2.4 kernels, to adapt the latest kernel API, and additional drivers
-which are still in development or in tests. The drivers in alsa-driver
-tree will be moved to alsa-kernel (and eventually to the 2.6 kernel
-tree) when they are finished and confirmed to work fine.
-
-The file tree structure of ALSA driver is depicted below. Both
-alsa-kernel and alsa-driver have almost the same file structure, except
-for “core” directory. It's named as “acore” in alsa-driver tree.
+The file tree structure of ALSA driver is depicted below.
::
@@ -61,14 +37,11 @@ for “core” directory. It's named as “acore” in alsa-driver tree.
/oss
/seq
/oss
- /instr
- /ioctl32
/include
/drivers
/mpu401
/opl3
/i2c
- /l3
/synth
/emux
/pci
@@ -80,6 +53,7 @@ for “core” directory. It's named as “acore” in alsa-driver tree.
/sparc
/usb
/pcmcia /(cards)
+ /soc
/oss
@@ -99,13 +73,6 @@ directory. The rawmidi OSS emulation is included in the ALSA rawmidi
code since it's quite small. The sequencer code is stored in
``core/seq/oss`` directory (see `below <#core-seq-oss>`__).
-core/ioctl32
-~~~~~~~~~~~~
-
-This directory contains the 32bit-ioctl wrappers for 64bit architectures
-such like x86-64, ppc64 and sparc64. For 32bit and alpha architectures,
-these are not compiled.
-
core/seq
~~~~~~~~
@@ -119,11 +86,6 @@ core/seq/oss
This contains the OSS sequencer emulation codes.
-core/seq/instr
-~~~~~~~~~~~~~~
-
-This directory contains the modules for the sequencer instrument layer.
-
include directory
-----------------
@@ -161,11 +123,6 @@ Although there is a standard i2c layer on Linux, ALSA has its own i2c
code for some cards, because the soundcard needs only a simple operation
and the standard i2c API is too complicated for such a purpose.
-i2c/l3
-~~~~~~
-
-This is a sub-directory for ARM L3 i2c.
-
synth directory
---------------
@@ -209,11 +166,19 @@ The PCMCIA, especially PCCard drivers will go here. CardBus drivers will
be in the pci directory, because their API is identical to that of
standard PCI cards.
+soc directory
+-------------
+
+This directory contains the codes for ASoC (ALSA System on Chip)
+layer including ASoC core, codec and machine drivers.
+
oss directory
-------------
-The OSS/Lite source files are stored here in Linux 2.6 (or later) tree.
-In the ALSA driver tarball, this directory is empty, of course :)
+Here contains OSS/Lite codes.
+All codes have been deprecated except for dmasound on m68k as of
+writing this.
+
Basic Flow for PCI Drivers
==========================
@@ -352,10 +317,8 @@ to details explained in the following section.
/* (3) */
err = snd_mychip_create(card, pci, &chip);
- if (err < 0) {
- snd_card_free(card);
- return err;
- }
+ if (err < 0)
+ goto error;
/* (4) */
strcpy(card->driver, "My Chip");
@@ -368,22 +331,23 @@ to details explained in the following section.
/* (6) */
err = snd_card_register(card);
- if (err < 0) {
- snd_card_free(card);
- return err;
- }
+ if (err < 0)
+ goto error;
/* (7) */
pci_set_drvdata(pci, card);
dev++;
return 0;
+
+ error:
+ snd_card_free(card);
+ return err;
}
/* destructor -- see the "Destructor" sub-section */
static void snd_mychip_remove(struct pci_dev *pci)
{
snd_card_free(pci_get_drvdata(pci));
- pci_set_drvdata(pci, NULL);
}
@@ -445,14 +409,26 @@ In this part, the PCI resources are allocated.
struct mychip *chip;
....
err = snd_mychip_create(card, pci, &chip);
- if (err < 0) {
- snd_card_free(card);
- return err;
- }
+ if (err < 0)
+ goto error;
The details will be explained in the section `PCI Resource
Management`_.
+When something goes wrong, the probe function needs to deal with the
+error. In this example, we have a single error handling path placed
+at the end of the function.
+
+::
+
+ error:
+ snd_card_free(card);
+ return err;
+
+Since each component can be properly freed, the single
+:c:func:`snd_card_free()` call should suffice in most cases.
+
+
4) Set the driver ID and name strings.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -486,10 +462,8 @@ too.
::
err = snd_card_register(card);
- if (err < 0) {
- snd_card_free(card);
- return err;
- }
+ if (err < 0)
+ goto error;
Will be explained in the section `Management of Cards and
Components`_, too.
@@ -513,14 +487,13 @@ The destructor, remove callback, simply releases the card instance. Then
the ALSA middle layer will release all the attached components
automatically.
-It would be typically like the following:
+It would be typically just :c:func:`calling snd_card_free()`:
::
static void snd_mychip_remove(struct pci_dev *pci)
{
snd_card_free(pci_get_drvdata(pci));
- pci_set_drvdata(pci, NULL);
}
@@ -546,7 +519,7 @@ in the source file. If the code is split into several files, the files
without module options don't need them.
In addition to these headers, you'll need ``<linux/interrupt.h>`` for
-interrupt handling, and ``<asm/io.h>`` for I/O access. If you use the
+interrupt handling, and ``<linux/io.h>`` for I/O access. If you use the
:c:func:`mdelay()` or :c:func:`udelay()` functions, you'll need
to include ``<linux/delay.h>`` too.
@@ -720,6 +693,13 @@ function, which will call the real destructor.
where :c:func:`snd_mychip_free()` is the real destructor.
+The demerit of this method is the obviously more amount of codes.
+The merit is, however, you can trigger the own callback at registering
+and disconnecting the card via setting in snd_device_ops.
+About the registering and disconnecting the card, see the subsections
+below.
+
+
Registration and Release
------------------------
@@ -905,10 +885,8 @@ Resource Allocation
-------------------
The allocation of I/O ports and irqs is done via standard kernel
-functions. Unlike ALSA ver.0.5.x., there are no helpers for that. And
-these resources must be released in the destructor function (see below).
-Also, on ALSA 0.9.x, you don't need to allocate (pseudo-)DMA for PCI
-like in ALSA 0.5.x.
+functions. These resources must be released in the destructor
+function (see below).
Now assume that the PCI device has an I/O port with 8 bytes and an
interrupt. Then :c:type:`struct mychip <mychip>` will have the
@@ -1064,7 +1042,8 @@ and the allocation would be like below:
::
- if ((err = pci_request_regions(pci, "My Chip")) < 0) {
+ err = pci_request_regions(pci, "My Chip");
+ if (err < 0) {
kfree(chip);
return err;
}
@@ -1086,6 +1065,21 @@ and the corresponding destructor would be:
....
}
+Of course, a modern way with :c:func:`pci_iomap()` will make things a
+bit easier, too.
+
+::
+
+ err = pci_request_regions(pci, "My Chip");
+ if (err < 0) {
+ kfree(chip);
+ return err;
+ }
+ chip->iobase_virt = pci_iomap(pci, 0, 0);
+
+which is paired with :c:func:`pci_iounmap()` at destructor.
+
+
PCI Entries
-----------
@@ -1154,13 +1148,6 @@ And at last, the module entries:
Note that these module entries are tagged with ``__init`` and ``__exit``
prefixes.
-Oh, one thing was forgotten. If you have no exported symbols, you need
-to declare it in 2.2 or 2.4 kernels (it's not necessary in 2.6 kernels).
-
-::
-
- EXPORT_NO_SYMBOLS;
-
That's all!
PCM Interface
@@ -2113,6 +2100,16 @@ non-contiguous buffers. The mmap calls this callback to get the page
address. Some examples will be explained in the later section `Buffer
and Memory Management`_, too.
+mmap calllback
+~~~~~~~~~~~~~~
+
+This is another optional callback for controlling mmap behavior.
+Once when defined, PCM core calls this callback when a page is
+memory-mapped instead of dealing via the standard helper.
+If you need special handling (due to some architecture or
+device-specific issues), implement everything here as you like.
+
+
PCM Interrupt Handler
---------------------
@@ -2370,6 +2367,27 @@ to define the inverse rule:
hw_rule_format_by_channels, NULL,
SNDRV_PCM_HW_PARAM_CHANNELS, -1);
+One typical usage of the hw constraints is to align the buffer size
+with the period size. As default, ALSA PCM core doesn't enforce the
+buffer size to be aligned with the period size. For example, it'd be
+possible to have a combination like 256 period bytes with 999 buffer
+bytes.
+
+Many device chips, however, require the buffer to be a multiple of
+periods. In such a case, call
+:c:func:`snd_pcm_hw_constraint_integer()` for
+``SNDRV_PCM_HW_PARAM_PERIODS``.
+
+::
+
+ snd_pcm_hw_constraint_integer(substream->runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+
+This assures that the number of periods is integer, hence the buffer
+size is aligned with the period size.
+
+The hw constraint is a very much powerful mechanism to define the
+preferred PCM configuration, and there are relevant helpers.
I won't give more details here, rather I would like to say, “Luke, use
the source.”
@@ -3712,7 +3730,14 @@ example, for an intermediate buffer. Since the allocated pages are not
contiguous, you need to set the ``page`` callback to obtain the physical
address at every offset.
-The implementation of ``page`` callback would be like this:
+The easiest way to achieve it would be to use
+:c:func:`snd_pcm_lib_alloc_vmalloc_buffer()` for allocating the buffer
+via :c:func:`vmalloc()`, and set :c:func:`snd_pcm_sgbuf_ops_page()` to
+the ``page`` callback. At release, you need to call
+:c:func:`snd_pcm_lib_free_vmalloc_buffer()`.
+
+If you want to implementation the ``page`` manually, it would be like
+this:
::
@@ -3848,7 +3873,9 @@ Power Management
If the chip is supposed to work with suspend/resume functions, you need
to add power-management code to the driver. The additional code for
-power-management should be ifdef-ed with ``CONFIG_PM``.
+power-management should be ifdef-ed with ``CONFIG_PM``, or annotated
+with __maybe_unused attribute; otherwise the compiler will complain
+you.
If the driver *fully* supports suspend/resume that is, the device can be
properly resumed to its state when suspend was called, you can set the
@@ -3879,18 +3906,16 @@ the case of PCI drivers, the callbacks look like below:
::
- #ifdef CONFIG_PM
- static int snd_my_suspend(struct pci_dev *pci, pm_message_t state)
+ static int __maybe_unused snd_my_suspend(struct device *dev)
{
.... /* do things for suspend */
return 0;
}
- static int snd_my_resume(struct pci_dev *pci)
+ static int __maybe_unused snd_my_resume(struct device *dev)
{
.... /* do things for suspend */
return 0;
}
- #endif
The scheme of the real suspend job is as follows.
@@ -3909,18 +3934,14 @@ The scheme of the real suspend job is as follows.
6. Stop the hardware if necessary.
-7. Disable the PCI device by calling
- :c:func:`pci_disable_device()`. Then, call
- :c:func:`pci_save_state()` at last.
-
A typical code would be like:
::
- static int mychip_suspend(struct pci_dev *pci, pm_message_t state)
+ static int __maybe_unused mychip_suspend(struct device *dev)
{
/* (1) */
- struct snd_card *card = pci_get_drvdata(pci);
+ struct snd_card *card = dev_get_drvdata(dev);
struct mychip *chip = card->private_data;
/* (2) */
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
@@ -3932,9 +3953,6 @@ A typical code would be like:
snd_mychip_save_registers(chip);
/* (6) */
snd_mychip_stop_hardware(chip);
- /* (7) */
- pci_disable_device(pci);
- pci_save_state(pci);
return 0;
}
@@ -3943,44 +3961,35 @@ The scheme of the real resume job is as follows.
1. Retrieve the card and the chip data.
-2. Set up PCI. First, call :c:func:`pci_restore_state()`. Then
- enable the pci device again by calling
- :c:func:`pci_enable_device()`. Call
- :c:func:`pci_set_master()` if necessary, too.
+2. Re-initialize the chip.
-3. Re-initialize the chip.
+3. Restore the saved registers if necessary.
-4. Restore the saved registers if necessary.
+4. Resume the mixer, e.g. calling :c:func:`snd_ac97_resume()`.
-5. Resume the mixer, e.g. calling :c:func:`snd_ac97_resume()`.
+5. Restart the hardware (if any).
-6. Restart the hardware (if any).
-
-7. Call :c:func:`snd_power_change_state()` with
+6. Call :c:func:`snd_power_change_state()` with
``SNDRV_CTL_POWER_D0`` to notify the processes.
A typical code would be like:
::
- static int mychip_resume(struct pci_dev *pci)
+ static int __maybe_unused mychip_resume(struct pci_dev *pci)
{
/* (1) */
- struct snd_card *card = pci_get_drvdata(pci);
+ struct snd_card *card = dev_get_drvdata(dev);
struct mychip *chip = card->private_data;
/* (2) */
- pci_restore_state(pci);
- pci_enable_device(pci);
- pci_set_master(pci);
- /* (3) */
snd_mychip_reinit_chip(chip);
- /* (4) */
+ /* (3) */
snd_mychip_restore_registers(chip);
- /* (5) */
+ /* (4) */
snd_ac97_resume(chip->ac97);
- /* (6) */
+ /* (5) */
snd_mychip_restart_chip(chip);
- /* (7) */
+ /* (6) */
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
return 0;
}
@@ -4046,15 +4055,14 @@ And next, set suspend/resume callbacks to the pci_driver.
::
+ static SIMPLE_DEV_PM_OPS(snd_my_pm_ops, mychip_suspend, mychip_resume);
+
static struct pci_driver driver = {
.name = KBUILD_MODNAME,
.id_table = snd_my_ids,
.probe = snd_my_probe,
.remove = snd_my_remove,
- #ifdef CONFIG_PM
- .suspend = snd_my_suspend,
- .resume = snd_my_resume,
- #endif
+ .driver.pm = &snd_my_pm_ops,
};
Module Parameters
@@ -4078,7 +4086,7 @@ variables, instead. ``enable`` option is not always necessary in this
case, but it would be better to have a dummy option for compatibility.
The module parameters must be declared with the standard
-``module_param()()``, ``module_param_array()()`` and
+``module_param()``, ``module_param_array()`` and
:c:func:`MODULE_PARM_DESC()` macros.
The typical coding would be like below:
@@ -4094,15 +4102,14 @@ The typical coding would be like below:
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable " CARD_NAME " soundcard.");
-Also, don't forget to define the module description, classes, license
-and devices. Especially, the recent modprobe requires to define the
+Also, don't forget to define the module description and the license.
+Especially, the recent modprobe requires to define the
module license as GPL, etc., otherwise the system is shown as “tainted”.
::
- MODULE_DESCRIPTION("My Chip");
+ MODULE_DESCRIPTION("Sound driver for My Chip");
MODULE_LICENSE("GPL");
- MODULE_SUPPORTED_DEVICE("{{Vendor,My Chip Name}}");
How To Put Your Driver Into ALSA Tree
@@ -4117,21 +4124,17 @@ a question now: how to put my own driver into the ALSA driver tree? Here
Suppose that you create a new PCI driver for the card “xyz”. The card
module name would be snd-xyz. The new driver is usually put into the
-alsa-driver tree, ``alsa-driver/pci`` directory in the case of PCI
-cards. Then the driver is evaluated, audited and tested by developers
-and users. After a certain time, the driver will go to the alsa-kernel
-tree (to the corresponding directory, such as ``alsa-kernel/pci``) and
-eventually will be integrated into the Linux 2.6 tree (the directory
-would be ``linux/sound/pci``).
+alsa-driver tree, ``sound/pci`` directory in the case of PCI
+cards.
In the following sections, the driver code is supposed to be put into
-alsa-driver tree. The two cases are covered: a driver consisting of a
+Linux kernel tree. The two cases are covered: a driver consisting of a
single source file and one consisting of several source files.
Driver with A Single Source File
--------------------------------
-1. Modify alsa-driver/pci/Makefile
+1. Modify sound/pci/Makefile
Suppose you have a file xyz.c. Add the following two lines
@@ -4160,52 +4163,43 @@ Driver with A Single Source File
For the details of Kconfig script, refer to the kbuild documentation.
-3. Run cvscompile script to re-generate the configure script and build
- the whole stuff again.
-
Drivers with Several Source Files
---------------------------------
Suppose that the driver snd-xyz have several source files. They are
-located in the new subdirectory, pci/xyz.
+located in the new subdirectory, sound/pci/xyz.
-1. Add a new directory (``xyz``) in ``alsa-driver/pci/Makefile`` as
- below
+1. Add a new directory (``sound/pci/xyz``) in ``sound/pci/Makefile``
+ as below
::
- obj-$(CONFIG_SND) += xyz/
+ obj-$(CONFIG_SND) += sound/pci/xyz/
-2. Under the directory ``xyz``, create a Makefile
+2. Under the directory ``sound/pci/xyz``, create a Makefile
::
- ifndef SND_TOPDIR
- SND_TOPDIR=../..
- endif
-
- include $(SND_TOPDIR)/toplevel.config
- include $(SND_TOPDIR)/Makefile.conf
-
snd-xyz-objs := xyz.o abc.o def.o
-
obj-$(CONFIG_SND_XYZ) += snd-xyz.o
- include $(SND_TOPDIR)/Rules.make
-
3. Create the Kconfig entry
This procedure is as same as in the last section.
-4. Run cvscompile script to re-generate the configure script and build
- the whole stuff again.
Useful Functions
================
:c:func:`snd_printk()` and friends
----------------------------------------
+----------------------------------
+
+.. note:: This subsection describes a few helper functions for
+ decorating a bit more on the standard :c:func:`printk()` & co.
+ However, in general, the use of such helpers is no longer recommended.
+ If possible, try to stick with the standard functions like
+ :c:func:`dev_err()` or :c:func:`pr_err()`.
ALSA provides a verbose version of the :c:func:`printk()` function.
If a kernel config ``CONFIG_SND_VERBOSE_PRINTK`` is set, this function
@@ -4221,13 +4215,10 @@ just like :c:func:`snd_printk()`. If the ALSA is compiled without
the debugging flag, it's ignored.
:c:func:`snd_printdd()` is compiled in only when
-``CONFIG_SND_DEBUG_VERBOSE`` is set. Please note that
-``CONFIG_SND_DEBUG_VERBOSE`` is not set as default even if you configure
-the alsa-driver with ``--with-debug=full`` option. You need to give
-explicitly ``--with-debug=detect`` option instead.
+``CONFIG_SND_DEBUG_VERBOSE`` is set.
:c:func:`snd_BUG()`
-------------------------
+-------------------
It shows the ``BUG?`` message and stack trace as well as
:c:func:`snd_BUG_ON()` at the point. It's useful to show that a
@@ -4236,7 +4227,7 @@ fatal error happens there.
When no debug flag is set, this macro is ignored.
:c:func:`snd_BUG_ON()`
-----------------------------
+----------------------
:c:func:`snd_BUG_ON()` macro is similar with
:c:func:`WARN_ON()` macro. For example, snd_BUG_ON(!pointer); or
diff --git a/Documentation/sphinx-static/theme_overrides.css b/Documentation/sphinx-static/theme_overrides.css
index 522b6d4c49d4..e21e36cd6761 100644
--- a/Documentation/sphinx-static/theme_overrides.css
+++ b/Documentation/sphinx-static/theme_overrides.css
@@ -4,6 +4,44 @@
*
*/
+/* Improve contrast and increase size for easier reading. */
+
+body {
+ font-family: serif;
+ color: black;
+ font-size: 100%;
+}
+
+h1, h2, .rst-content .toctree-wrapper p.caption, h3, h4, h5, h6, legend {
+ font-family: sans-serif;
+}
+
+.wy-menu-vertical li.current a {
+ color: #505050;
+}
+
+.wy-menu-vertical li.on a, .wy-menu-vertical li.current > a {
+ color: #303030;
+}
+
+div[class^="highlight"] pre {
+ font-family: monospace;
+ color: black;
+ font-size: 100%;
+}
+
+.wy-menu-vertical {
+ font-family: sans-serif;
+}
+
+.c {
+ font-style: normal;
+}
+
+p {
+ font-size: 100%;
+}
+
/* Interim: Code-blocks with line nos - lines and line numbers don't line up.
* see: https://github.com/rtfd/sphinx_rtd_theme/issues/419
*/
diff --git a/Documentation/spi/00-INDEX b/Documentation/spi/00-INDEX
deleted file mode 100644
index 8e4bb17d70eb..000000000000
--- a/Documentation/spi/00-INDEX
+++ /dev/null
@@ -1,16 +0,0 @@
-00-INDEX
- - this file.
-butterfly
- - AVR Butterfly SPI driver overview and pin configuration.
-ep93xx_spi
- - Basic EP93xx SPI driver configuration.
-pxa2xx
- - PXA2xx SPI master controller build by spi_message fifo wq
-spidev
- - Intro to the userspace API for spi devices
-spi-lm70llp
- - Connecting an LM70-LLP sensor to the kernel via the SPI subsys.
-spi-sc18is602
- - NXP SC18IS602/603 I2C-bus to SPI bridge
-spi-summary
- - (Linux) SPI overview. If unsure about SPI or SPI in Linux, start here.
diff --git a/Documentation/switchtec.txt b/Documentation/switchtec.txt
index f788264921ff..30d6a64e53f7 100644
--- a/Documentation/switchtec.txt
+++ b/Documentation/switchtec.txt
@@ -23,7 +23,7 @@ The primary means of communicating with the Switchtec management firmware is
through the Memory-mapped Remote Procedure Call (MRPC) interface.
Commands are submitted to the interface with a 4-byte command
identifier and up to 1KB of command specific data. The firmware will
-respond with a 4 bytes return code and up to 1KB of command specific
+respond with a 4-byte return code and up to 1KB of command-specific
data. The interface only processes a single command at a time.
@@ -36,8 +36,8 @@ device: /dev/switchtec#, one for each management endpoint in the system.
The char device has the following semantics:
* A write must consist of at least 4 bytes and no more than 1028 bytes.
- The first four bytes will be interpreted as the command to run and
- the remainder will be used as the input data. A write will send the
+ The first 4 bytes will be interpreted as the Command ID and the
+ remainder will be used as the input data. A write will send the
command to the firmware to begin processing.
* Each write must be followed by exactly one read. Any double write will
@@ -45,9 +45,9 @@ The char device has the following semantics:
produce an error.
* A read will block until the firmware completes the command and return
- the four bytes of status plus up to 1024 bytes of output data. (The
- length will be specified by the size parameter of the read call --
- reading less than 4 bytes will produce an error.
+ the 4-byte Command Return Value plus up to 1024 bytes of output
+ data. (The length will be specified by the size parameter of the read
+ call -- reading less than 4 bytes will produce an error.)
* The poll call will also be supported for userspace applications that
need to do other things while waiting for the command to complete.
@@ -83,10 +83,20 @@ The following IOCTLs are also supported by the device:
Non-Transparent Bridge (NTB) Driver
===================================
-An NTB driver is provided for the switchtec hardware in switchtec_ntb.
-Currently, it only supports switches configured with exactly 2
-partitions. It also requires the following configuration settings:
+An NTB hardware driver is provided for the Switchtec hardware in
+ntb_hw_switchtec. Currently, it only supports switches configured with
+exactly 2 NT partitions and zero or more non-NT partitions. It also requires
+the following configuration settings:
-* Both partitions must be able to access each other's GAS spaces.
+* Both NT partitions must be able to access each other's GAS spaces.
Thus, the bits in the GAS Access Vector under Management Settings
must be set to support this.
+* Kernel configuration MUST include support for NTB (CONFIG_NTB needs
+ to be set)
+
+NT EP BAR 2 will be dynamically configured as a Direct Window, and
+the configuration file does not need to configure it explicitly.
+
+Please refer to Documentation/ntb.txt in Linux source tree for an overall
+understanding of the Linux NTB stack. ntb_hw_switchtec works as an NTB
+Hardware Driver in this stack.
diff --git a/Documentation/sysctl/00-INDEX b/Documentation/sysctl/00-INDEX
deleted file mode 100644
index 8cf5d493fd03..000000000000
--- a/Documentation/sysctl/00-INDEX
+++ /dev/null
@@ -1,16 +0,0 @@
-00-INDEX
- - this file.
-README
- - general information about /proc/sys/ sysctl files.
-abi.txt
- - documentation for /proc/sys/abi/*.
-fs.txt
- - documentation for /proc/sys/fs/*.
-kernel.txt
- - documentation for /proc/sys/kernel/*.
-net.txt
- - documentation for /proc/sys/net/*.
-sunrpc.txt
- - documentation for /proc/sys/sunrpc/*.
-vm.txt
- - documentation for /proc/sys/vm/*.
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index 37a679501ddc..1b8775298cf7 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -89,6 +89,7 @@ show up in /proc/sys/kernel:
- shmmni
- softlockup_all_cpu_backtrace
- soft_watchdog
+- stack_erasing
- stop-a [ SPARC only ]
- sysrq ==> Documentation/admin-guide/sysrq.rst
- sysctl_writes_strict
@@ -987,6 +988,23 @@ detect a hard lockup condition.
==============================================================
+stack_erasing
+
+This parameter can be used to control kernel stack erasing at the end
+of syscalls for kernels built with CONFIG_GCC_PLUGIN_STACKLEAK.
+
+That erasing reduces the information which kernel stack leak bugs
+can reveal and blocks some uninitialized stack variable attacks.
+The tradeoff is the performance impact: on a single CPU system kernel
+compilation sees a 1% slowdown, other systems and workloads may vary.
+
+ 0: kernel stack erasing is disabled, STACKLEAK_METRICS are not updated.
+
+ 1: kernel stack erasing is enabled (default), it is performed before
+ returning to the userspace at the end of syscalls.
+
+==============================================================
+
tainted:
Non-zero if the kernel has been tainted. Numeric values, which can be
diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt
index 9ecde517728c..2793d4eac55f 100644
--- a/Documentation/sysctl/net.txt
+++ b/Documentation/sysctl/net.txt
@@ -92,6 +92,14 @@ Values :
0 - disable JIT kallsyms export (default value)
1 - enable JIT kallsyms export for privileged users only
+bpf_jit_limit
+-------------
+
+This enforces a global limit for memory allocations to the BPF JIT
+compiler in order to reject unprivileged JIT requests once it has
+been surpassed. bpf_jit_limit contains the value of the global limit
+in bytes.
+
dev_weight
--------------
diff --git a/Documentation/timers/00-INDEX b/Documentation/timers/00-INDEX
deleted file mode 100644
index 3be05fe0f1f9..000000000000
--- a/Documentation/timers/00-INDEX
+++ /dev/null
@@ -1,16 +0,0 @@
-00-INDEX
- - this file
-highres.txt
- - High resolution timers and dynamic ticks design notes
-hpet.txt
- - High Precision Event Timer Driver for Linux
-hrtimers.txt
- - subsystem for high-resolution kernel timers
-NO_HZ.txt
- - Summary of the different methods for the scheduler clock-interrupts management.
-timekeeping.txt
- - Clock sources, clock events, sched_clock() and delay timer notes
-timers-howto.txt
- - how to insert delays in the kernel the right (tm) way.
-timer_stats.txt
- - timer usage statistics
diff --git a/Documentation/trace/ftrace.rst b/Documentation/trace/ftrace.rst
index 7ea16a0ceffc..f82434f2795e 100644
--- a/Documentation/trace/ftrace.rst
+++ b/Documentation/trace/ftrace.rst
@@ -2987,6 +2987,9 @@ The following commands are supported:
command, it only prints out the contents of the ring buffer for the
CPU that executed the function that triggered the dump.
+- stacktrace:
+ When the function is hit, a stack trace is recorded.
+
trace_pipe
----------
diff --git a/Documentation/trace/histogram.rst b/Documentation/trace/histogram.rst
index 5ac724baea7d..7dda76503127 100644
--- a/Documentation/trace/histogram.rst
+++ b/Documentation/trace/histogram.rst
@@ -1765,7 +1765,7 @@ For example, here's how a latency can be calculated::
# echo 'hist:keys=pid,prio:ts0=common_timestamp ...' >> event1/trigger
# echo 'hist:keys=next_pid:wakeup_lat=common_timestamp-$ts0 ...' >> event2/trigger
-In the first line above, the event's timetamp is saved into the
+In the first line above, the event's timestamp is saved into the
variable ts0. In the next line, ts0 is subtracted from the second
event's timestamp to produce the latency, which is then assigned into
yet another variable, 'wakeup_lat'. The hist trigger below in turn
@@ -1811,7 +1811,7 @@ the command that defined it with a '!'::
/sys/kernel/debug/tracing/synthetic_events
At this point, there isn't yet an actual 'wakeup_latency' event
-instantiated in the event subsytem - for this to happen, a 'hist
+instantiated in the event subsystem - for this to happen, a 'hist
trigger action' needs to be instantiated and bound to actual fields
and variables defined on other events (see Section 2.2.3 below on
how that is done using hist trigger 'onmatch' action). Once that is
@@ -1837,7 +1837,7 @@ output can be displayed by reading the event's 'hist' file.
A hist trigger 'action' is a function that's executed whenever a
histogram entry is added or updated.
-The default 'action' if no special function is explicity specified is
+The default 'action' if no special function is explicitly specified is
as it always has been, to simply update the set of values associated
with an entry. Some applications, however, may want to perform
additional actions at that point, such as generate another event, or
diff --git a/Documentation/trace/kprobetrace.rst b/Documentation/trace/kprobetrace.rst
index 8bfc75c90806..47e765c2f2c3 100644
--- a/Documentation/trace/kprobetrace.rst
+++ b/Documentation/trace/kprobetrace.rst
@@ -45,16 +45,18 @@ Synopsis of kprobe_events
@SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol)
$stackN : Fetch Nth entry of stack (N >= 0)
$stack : Fetch stack address.
- $retval : Fetch return value.(*)
+ $argN : Fetch the Nth function argument. (N >= 1) (\*1)
+ $retval : Fetch return value.(\*2)
$comm : Fetch current task comm.
- +|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address.(**)
+ +|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address.(\*3)
NAME=FETCHARG : Set NAME as the argument name of FETCHARG.
FETCHARG:TYPE : Set TYPE as the type of FETCHARG. Currently, basic types
(u8/u16/u32/u64/s8/s16/s32/s64), hexadecimal types
(x8/x16/x32/x64), "string" and bitfield are supported.
- (*) only for return probe.
- (**) this is useful for fetching a field of data structures.
+ (\*1) only for the probe on function entry (offs == 0).
+ (\*2) only for return probe.
+ (\*3) this is useful for fetching a field of data structures.
Types
-----
@@ -64,14 +66,27 @@ respectively. 'x' prefix implies it is unsigned. Traced arguments are shown
in decimal ('s' and 'u') or hexadecimal ('x'). Without type casting, 'x32'
or 'x64' is used depends on the architecture (e.g. x86-32 uses x32, and
x86-64 uses x64).
+These value types can be an array. To record array data, you can add '[N]'
+(where N is a fixed number, less than 64) to the base type.
+E.g. 'x16[4]' means an array of x16 (2bytes hex) with 4 elements.
+Note that the array can be applied to memory type fetchargs, you can not
+apply it to registers/stack-entries etc. (for example, '$stack1:x8[8]' is
+wrong, but '+8($stack):x8[8]' is OK.)
String type is a special type, which fetches a "null-terminated" string from
kernel space. This means it will fail and store NULL if the string container
has been paged out.
+The string array type is a bit different from other types. For other base
+types, <base-type>[1] is equal to <base-type> (e.g. +0(%di):x32[1] is same
+as +0(%di):x32.) But string[1] is not equal to string. The string type itself
+represents "char array", but string array type represents "char * array".
+So, for example, +0(%di):string[1] is equal to +0(+0(%di)):string.
Bitfield is another special type, which takes 3 parameters, bit-width, bit-
offset, and container-size (usually 32). The syntax is::
b<bit-width>@<bit-offset>/<container-size>
+Symbol type('symbol') is an alias of u32 or u64 type (depends on BITS_PER_LONG)
+which shows given pointer in "symbol+offset" style.
For $comm, the default type is "string"; any other type is invalid.
diff --git a/Documentation/trace/stm.rst b/Documentation/trace/stm.rst
index 2c22ddb7fd3e..99f99963e5e7 100644
--- a/Documentation/trace/stm.rst
+++ b/Documentation/trace/stm.rst
@@ -1,3 +1,5 @@
+.. SPDX-License-Identifier: GPL-2.0
+
===================
System Trace Module
===================
@@ -53,12 +55,30 @@ under "user" directory from the example above and this new rule will
be used for trace sources with the id string of "user/dummy".
Trace sources have to open the stm class device's node and write their
-trace data into its file descriptor. In order to identify themselves
-to the policy, they need to do a STP_POLICY_ID_SET ioctl on this file
-descriptor providing their id string. Otherwise, they will be
-automatically allocated a master/channel pair upon first write to this
-file descriptor according to the "default" rule of the policy, if such
-exists.
+trace data into its file descriptor.
+
+In order to find an appropriate policy node for a given trace source,
+several mechanisms can be used. First, a trace source can explicitly
+identify itself by calling an STP_POLICY_ID_SET ioctl on the character
+device's file descriptor, providing their id string, before they write
+any data there. Secondly, if they chose not to perform the explicit
+identification (because you may not want to patch existing software
+to do this), they can just start writing the data, at which point the
+stm core will try to find a policy node with the name matching the
+task's name (e.g., "syslogd") and if one exists, it will be used.
+Thirdly, if the task name can't be found among the policy nodes, the
+catch-all entry "default" will be used, if it exists. This entry also
+needs to be created and configured by the system administrator or
+whatever tools are taking care of the policy configuration. Finally,
+if all the above steps failed, the write() to an stm file descriptor
+will return a error (EINVAL).
+
+Previously, if no policy nodes were found for a trace source, the stm
+class would silently fall back to allocating the first available
+contiguous range of master/channels from the beginning of the device's
+master/channel range. The new requirement for a policy node to exist
+will help programmers and sysadmins identify gaps in configuration
+and have better control over the un-identified sources.
Some STM devices may allow direct mapping of the channel mmio regions
to userspace for zero-copy writing. One mappable page (in terms of
@@ -92,9 +112,9 @@ allocated for the device according to the policy configuration. If
there's a node in the root of the policy directory that matches the
stm_source device's name (for example, "console"), this node will be
used to allocate master and channel numbers. If there's no such policy
-node, the stm core will pick the first contiguous chunk of channels
-within the first available master. Note that the node must exist
-before the stm_source device is connected to its stm device.
+node, the stm core will use the catch-all entry "default", if one
+exists. If neither policy nodes exist, the write() to stm_source_link
+will return an error.
stm_console
===========
diff --git a/Documentation/trace/sys-t.rst b/Documentation/trace/sys-t.rst
new file mode 100644
index 000000000000..3d8eb92735e9
--- /dev/null
+++ b/Documentation/trace/sys-t.rst
@@ -0,0 +1,62 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================
+MIPI SyS-T over STP
+===================
+
+The MIPI SyS-T protocol driver can be used with STM class devices to
+generate standardized trace stream. Aside from being a standard, it
+provides better trace source identification and timestamp correlation.
+
+In order to use the MIPI SyS-T protocol driver with your STM device,
+first, you'll need CONFIG_STM_PROTO_SYS_T.
+
+Now, you can select which protocol driver you want to use when you create
+a policy for your STM device, by specifying it in the policy name:
+
+# mkdir /config/stp-policy/dummy_stm.0:p_sys-t.my-policy/
+
+In other words, the policy name format is extended like this:
+
+ <device_name>:<protocol_name>.<policy_name>
+
+With Intel TH, therefore it can look like "0-sth:p_sys-t.my-policy".
+
+If the protocol name is omitted, the STM class will chose whichever
+protocol driver was loaded first.
+
+You can also double check that everything is working as expected by
+
+# cat /config/stp-policy/dummy_stm.0:p_sys-t.my-policy/protocol
+p_sys-t
+
+Now, with the MIPI SyS-T protocol driver, each policy node in the
+configfs gets a few additional attributes, which determine per-source
+parameters specific to the protocol:
+
+# mkdir /config/stp-policy/dummy_stm.0:p_sys-t.my-policy/default
+# ls /config/stp-policy/dummy_stm.0:p_sys-t.my-policy/default
+channels
+clocksync_interval
+do_len
+masters
+ts_interval
+uuid
+
+The most important one here is the "uuid", which determines the UUID
+that will be used to tag all data coming from this source. It is
+automatically generated when a new node is created, but it is likely
+that you would want to change it.
+
+do_len switches on/off the additional "payload length" field in the
+MIPI SyS-T message header. It is off by default as the STP already
+marks message boundaries.
+
+ts_interval and clocksync_interval determine how much time in milliseconds
+can pass before we need to include a protocol (not transport, aka STP)
+timestamp in a message header or send a CLOCKSYNC packet, respectively.
+
+See Documentation/ABI/testing/configfs-stp-policy-p_sys-t for more
+details.
+
+* [1] https://www.mipi.org/specifications/sys-t
diff --git a/Documentation/virtual/00-INDEX b/Documentation/virtual/00-INDEX
deleted file mode 100644
index af0d23968ee7..000000000000
--- a/Documentation/virtual/00-INDEX
+++ /dev/null
@@ -1,11 +0,0 @@
-Virtualization support in the Linux kernel.
-
-00-INDEX
- - this file.
-
-paravirt_ops.txt
- - Describes the Linux kernel pv_ops to support different hypervisors
-kvm/
- - Kernel Virtual Machine. See also http://linux-kvm.org
-uml/
- - User Mode Linux, builds/runs Linux kernel as a userspace program.
diff --git a/Documentation/virtual/kvm/00-INDEX b/Documentation/virtual/kvm/00-INDEX
deleted file mode 100644
index 3492458a4ae8..000000000000
--- a/Documentation/virtual/kvm/00-INDEX
+++ /dev/null
@@ -1,35 +0,0 @@
-00-INDEX
- - this file.
-amd-memory-encryption.rst
- - notes on AMD Secure Encrypted Virtualization feature and SEV firmware
- command description
-api.txt
- - KVM userspace API.
-arm
- - internal ABI between the kernel and HYP (for arm/arm64)
-cpuid.txt
- - KVM-specific cpuid leaves (x86).
-devices/
- - KVM_CAP_DEVICE_CTRL userspace API.
-halt-polling.txt
- - notes on halt-polling
-hypercalls.txt
- - KVM hypercalls.
-locking.txt
- - notes on KVM locks.
-mmu.txt
- - the x86 kvm shadow mmu.
-msr.txt
- - KVM-specific MSRs (x86).
-nested-vmx.txt
- - notes on nested virtualization for Intel x86 processors.
-ppc-pv.txt
- - the paravirtualization interface on PowerPC.
-review-checklist.txt
- - review checklist for KVM patches.
-s390-diag.txt
- - Diagnose hypercall description (for IBM S/390)
-timekeeping.txt
- - timekeeping virtualization for x86-based architectures.
-vcpu-requests.rst
- - internal VCPU request API
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 647f94128a85..cd209f7730af 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -123,6 +123,37 @@ memory layout to fit in user mode), check KVM_CAP_MIPS_VZ and use the
flag KVM_VM_MIPS_VZ.
+On arm64, the physical address size for a VM (IPA Size limit) is limited
+to 40bits by default. The limit can be configured if the host supports the
+extension KVM_CAP_ARM_VM_IPA_SIZE. When supported, use
+KVM_VM_TYPE_ARM_IPA_SIZE(IPA_Bits) to set the size in the machine type
+identifier, where IPA_Bits is the maximum width of any physical
+address used by the VM. The IPA_Bits is encoded in bits[7-0] of the
+machine type identifier.
+
+e.g, to configure a guest to use 48bit physical address size :
+
+ vm_fd = ioctl(dev_fd, KVM_CREATE_VM, KVM_VM_TYPE_ARM_IPA_SIZE(48));
+
+The requested size (IPA_Bits) must be :
+ 0 - Implies default size, 40bits (for backward compatibility)
+
+ or
+
+ N - Implies N bits, where N is a positive integer such that,
+ 32 <= N <= Host_IPA_Limit
+
+Host_IPA_Limit is the maximum possible value for IPA_Bits on the host and
+is dependent on the CPU capability and the kernel configuration. The limit can
+be retrieved using KVM_CAP_ARM_VM_IPA_SIZE of the KVM_CHECK_EXTENSION
+ioctl() at run-time.
+
+Please note that configuring the IPA size does not affect the capability
+exposed by the guest CPUs in ID_AA64MMFR0_EL1[PARange]. It only affects
+size of the address translated by the stage2 level (guest physical to
+host physical address translations).
+
+
4.3 KVM_GET_MSR_INDEX_LIST, KVM_GET_MSR_FEATURE_INDEX_LIST
Capability: basic, KVM_CAP_GET_MSR_FEATURES for KVM_GET_MSR_FEATURE_INDEX_LIST
@@ -850,7 +881,7 @@ struct kvm_vcpu_events {
__u8 injected;
__u8 nr;
__u8 has_error_code;
- __u8 pad;
+ __u8 pending;
__u32 error_code;
} exception;
struct {
@@ -873,15 +904,23 @@ struct kvm_vcpu_events {
__u8 smm_inside_nmi;
__u8 latched_init;
} smi;
+ __u8 reserved[27];
+ __u8 exception_has_payload;
+ __u64 exception_payload;
};
-Only two fields are defined in the flags field:
+The following bits are defined in the flags field:
-- KVM_VCPUEVENT_VALID_SHADOW may be set in the flags field to signal that
+- KVM_VCPUEVENT_VALID_SHADOW may be set to signal that
interrupt.shadow contains a valid state.
-- KVM_VCPUEVENT_VALID_SMM may be set in the flags field to signal that
- smi contains a valid state.
+- KVM_VCPUEVENT_VALID_SMM may be set to signal that smi contains a
+ valid state.
+
+- KVM_VCPUEVENT_VALID_PAYLOAD may be set to signal that the
+ exception_has_payload, exception_payload, and exception.pending
+ fields contain a valid state. This bit will be set whenever
+ KVM_CAP_EXCEPTION_PAYLOAD is enabled.
ARM/ARM64:
@@ -961,6 +1000,11 @@ shall be written into the VCPU.
KVM_VCPUEVENT_VALID_SMM can only be set if KVM_CAP_X86_SMM is available.
+If KVM_CAP_EXCEPTION_PAYLOAD is enabled, KVM_VCPUEVENT_VALID_PAYLOAD
+can be set in the flags field to signal that the
+exception_has_payload, exception_payload, and exception.pending fields
+contain a valid state and shall be written into the VCPU.
+
ARM/ARM64:
Set the pending SError exception state for this VCPU. It is not possible to
@@ -1922,6 +1966,7 @@ registers, find a list below:
PPC | KVM_REG_PPC_TIDR | 64
PPC | KVM_REG_PPC_PSSCR | 64
PPC | KVM_REG_PPC_DEC_EXPIRY | 64
+ PPC | KVM_REG_PPC_PTCR | 64
PPC | KVM_REG_PPC_TM_GPR0 | 64
...
PPC | KVM_REG_PPC_TM_GPR31 | 64
@@ -2269,6 +2314,10 @@ The supported flags are:
The emulated MMU supports 1T segments in addition to the
standard 256M ones.
+ - KVM_PPC_NO_HASH
+ This flag indicates that HPT guests are not supported by KVM,
+ thus all guests must use radix MMU mode.
+
The "slb_size" field indicates how many SLB entries are supported
The "sps" array contains 8 entries indicating the supported base
@@ -3676,6 +3725,34 @@ Returns: 0 on success, -1 on error
This copies the vcpu's kvm_nested_state struct from userspace to the kernel. For
the definition of struct kvm_nested_state, see KVM_GET_NESTED_STATE.
+4.116 KVM_(UN)REGISTER_COALESCED_MMIO
+
+Capability: KVM_CAP_COALESCED_MMIO (for coalesced mmio)
+ KVM_CAP_COALESCED_PIO (for coalesced pio)
+Architectures: all
+Type: vm ioctl
+Parameters: struct kvm_coalesced_mmio_zone
+Returns: 0 on success, < 0 on error
+
+Coalesced I/O is a performance optimization that defers hardware
+register write emulation so that userspace exits are avoided. It is
+typically used to reduce the overhead of emulating frequently accessed
+hardware registers.
+
+When a hardware register is configured for coalesced I/O, write accesses
+do not exit to userspace and their value is recorded in a ring buffer
+that is shared between kernel and userspace.
+
+Coalesced I/O is used if one or more write accesses to a hardware
+register can be deferred until a read or a write to another hardware
+register on the same device. This last access will cause a vmexit and
+userspace will process accesses from the ring buffer before emulating
+it. That will avoid exiting to userspace on repeated writes.
+
+Coalesced pio is based on coalesced mmio. There is little difference
+between coalesced mmio and pio except that coalesced pio records accesses
+to I/O ports.
+
5. The kvm_run structure
------------------------
@@ -4522,7 +4599,7 @@ hpage module parameter is not set to 1, -EINVAL is returned.
While it is generally possible to create a huge page backed VM without
this capability, the VM will not be able to run.
-7.14 KVM_CAP_MSR_PLATFORM_INFO
+7.15 KVM_CAP_MSR_PLATFORM_INFO
Architectures: x86
Parameters: args[0] whether feature should be enabled or not
@@ -4531,6 +4608,45 @@ With this capability, a guest may read the MSR_PLATFORM_INFO MSR. Otherwise,
a #GP would be raised when the guest tries to access. Currently, this
capability does not enable write permissions of this MSR for the guest.
+7.16 KVM_CAP_PPC_NESTED_HV
+
+Architectures: ppc
+Parameters: none
+Returns: 0 on success, -EINVAL when the implementation doesn't support
+ nested-HV virtualization.
+
+HV-KVM on POWER9 and later systems allows for "nested-HV"
+virtualization, which provides a way for a guest VM to run guests that
+can run using the CPU's supervisor mode (privileged non-hypervisor
+state). Enabling this capability on a VM depends on the CPU having
+the necessary functionality and on the facility being enabled with a
+kvm-hv module parameter.
+
+7.17 KVM_CAP_EXCEPTION_PAYLOAD
+
+Architectures: x86
+Parameters: args[0] whether feature should be enabled or not
+
+With this capability enabled, CR2 will not be modified prior to the
+emulated VM-exit when L1 intercepts a #PF exception that occurs in
+L2. Similarly, for kvm-intel only, DR6 will not be modified prior to
+the emulated VM-exit when L1 intercepts a #DB exception that occurs in
+L2. As a result, when KVM_GET_VCPU_EVENTS reports a pending #PF (or
+#DB) exception for L2, exception.has_payload will be set and the
+faulting address (or the new DR6 bits*) will be reported in the
+exception_payload field. Similarly, when userspace injects a #PF (or
+#DB) into L2 using KVM_SET_VCPU_EVENTS, it is expected to set
+exception.has_payload and to put the faulting address (or the new DR6
+bits*) in the exception_payload field.
+
+This capability also enables exception.pending in struct
+kvm_vcpu_events, which allows userspace to distinguish between pending
+and injected exceptions.
+
+
+* For the new DR6 bits, note that bit 16 is set iff the #DB exception
+ will clear DR6.RTM.
+
8. Other capabilities.
----------------------
@@ -4772,3 +4888,10 @@ CPU when the exception is taken. If this virtual SError is taken to EL1 using
AArch64, this value will be reported in the ISS field of ESR_ELx.
See KVM_CAP_VCPU_EVENTS for more details.
+8.20 KVM_CAP_HYPERV_SEND_IPI
+
+Architectures: x86
+
+This capability indicates that KVM supports paravirtualized Hyper-V IPI send
+hypercalls:
+HvCallSendSyntheticClusterIpi, HvCallSendSyntheticClusterIpiEx.
diff --git a/Documentation/vm/00-INDEX b/Documentation/vm/00-INDEX
deleted file mode 100644
index f4a4f3e884cf..000000000000
--- a/Documentation/vm/00-INDEX
+++ /dev/null
@@ -1,50 +0,0 @@
-00-INDEX
- - this file.
-active_mm.rst
- - An explanation from Linus about tsk->active_mm vs tsk->mm.
-balance.rst
- - various information on memory balancing.
-cleancache.rst
- - Intro to cleancache and page-granularity victim cache.
-frontswap.rst
- - Outline frontswap, part of the transcendent memory frontend.
-highmem.rst
- - Outline of highmem and common issues.
-hmm.rst
- - Documentation of heterogeneous memory management
-hugetlbfs_reserv.rst
- - A brief overview of hugetlbfs reservation design/implementation.
-hwpoison.rst
- - explains what hwpoison is
-ksm.rst
- - how to use the Kernel Samepage Merging feature.
-mmu_notifier.rst
- - a note about clearing pte/pmd and mmu notifications
-numa.rst
- - information about NUMA specific code in the Linux vm.
-overcommit-accounting.rst
- - description of the Linux kernels overcommit handling modes.
-page_frags.rst
- - description of page fragments allocator
-page_migration.rst
- - description of page migration in NUMA systems.
-page_owner.rst
- - tracking about who allocated each page
-remap_file_pages.rst
- - a note about remap_file_pages() system call
-slub.rst
- - a short users guide for SLUB.
-split_page_table_lock.rst
- - Separate per-table lock to improve scalability of the old page_table_lock.
-swap_numa.rst
- - automatic binding of swap device to numa node
-transhuge.rst
- - Transparent Hugepage Support, alternative way of using hugepages.
-unevictable-lru.rst
- - Unevictable LRU infrastructure
-z3fold.txt
- - outline of z3fold allocator for storing compressed pages
-zsmalloc.rst
- - outline of zsmalloc allocator for storing compressed pages
-zswap.rst
- - Intro to compressed cache for swap pages
diff --git a/Documentation/vm/hmm.rst b/Documentation/vm/hmm.rst
index cdf3911582c8..44205f0b671f 100644
--- a/Documentation/vm/hmm.rst
+++ b/Documentation/vm/hmm.rst
@@ -194,13 +194,13 @@ use either::
unsigned long start,
unsigned long end,
hmm_pfn_t *pfns);
- int hmm_vma_fault(struct vm_area_struct *vma,
- struct hmm_range *range,
- unsigned long start,
- unsigned long end,
- hmm_pfn_t *pfns,
- bool write,
- bool block);
+ int hmm_vma_fault(struct vm_area_struct *vma,
+ struct hmm_range *range,
+ unsigned long start,
+ unsigned long end,
+ hmm_pfn_t *pfns,
+ bool write,
+ bool block);
The first one (hmm_vma_get_pfns()) will only fetch present CPU page table
entries and will not trigger a page fault on missing or non-present entries.
diff --git a/Documentation/vm/slub.rst b/Documentation/vm/slub.rst
index 3a775fd64e2d..195928808bac 100644
--- a/Documentation/vm/slub.rst
+++ b/Documentation/vm/slub.rst
@@ -36,9 +36,10 @@ debugging is enabled. Format:
slub_debug=<Debug-Options>
Enable options for all slabs
-slub_debug=<Debug-Options>,<slab name>
- Enable options only for select slabs
+slub_debug=<Debug-Options>,<slab name1>,<slab name2>,...
+ Enable options only for select slabs (no spaces
+ after a comma)
Possible debug options are::
@@ -62,7 +63,12 @@ Trying to find an issue in the dentry cache? Try::
slub_debug=,dentry
-to only enable debugging on the dentry cache.
+to only enable debugging on the dentry cache. You may use an asterisk at the
+end of the slab name, in order to cover all slabs with the same prefix. For
+example, here's how you can poison the dentry cache as well as all kmalloc
+slabs:
+
+ slub_debug=P,kmalloc-*,dentry
Red zoning and tracking may realign the slab. We can just apply sanity checks
to the dentry cache with::
diff --git a/Documentation/w1/00-INDEX b/Documentation/w1/00-INDEX
deleted file mode 100644
index cb49802745dc..000000000000
--- a/Documentation/w1/00-INDEX
+++ /dev/null
@@ -1,10 +0,0 @@
-00-INDEX
- - This file
-slaves/
- - Drivers that provide support for specific family codes.
-masters/
- - Individual chips providing 1-wire busses.
-w1.generic
- - The 1-wire (w1) bus
-w1.netlink
- - Userspace communication protocol over connector [1].
diff --git a/Documentation/w1/masters/00-INDEX b/Documentation/w1/masters/00-INDEX
deleted file mode 100644
index 8330cf9325f0..000000000000
--- a/Documentation/w1/masters/00-INDEX
+++ /dev/null
@@ -1,12 +0,0 @@
-00-INDEX
- - This file
-ds2482
- - The Maxim/Dallas Semiconductor DS2482 provides 1-wire busses.
-ds2490
- - The Maxim/Dallas Semiconductor DS2490 builds USB <-> W1 bridges.
-mxc-w1
- - W1 master controller driver found on Freescale MX2/MX3 SoCs
-omap-hdq
- - HDQ/1-wire module of TI OMAP 2430/3430.
-w1-gpio
- - GPIO 1-wire bus master driver.
diff --git a/Documentation/w1/slaves/00-INDEX b/Documentation/w1/slaves/00-INDEX
deleted file mode 100644
index 68946f83e579..000000000000
--- a/Documentation/w1/slaves/00-INDEX
+++ /dev/null
@@ -1,14 +0,0 @@
-00-INDEX
- - This file
-w1_therm
- - The Maxim/Dallas Semiconductor ds18*20 temperature sensor.
-w1_ds2413
- - The Maxim/Dallas Semiconductor ds2413 dual channel addressable switch.
-w1_ds2423
- - The Maxim/Dallas Semiconductor ds2423 counter device.
-w1_ds2438
- - The Maxim/Dallas Semiconductor ds2438 smart battery monitor.
-w1_ds28e04
- - The Maxim/Dallas Semiconductor ds28e04 eeprom.
-w1_ds28e17
- - The Maxim/Dallas Semiconductor ds28e17 1-Wire-to-I2C Master Bridge.
diff --git a/Documentation/watchdog/hpwdt.txt b/Documentation/watchdog/hpwdt.txt
index 6d866c537127..55df692c5595 100644
--- a/Documentation/watchdog/hpwdt.txt
+++ b/Documentation/watchdog/hpwdt.txt
@@ -1,15 +1,12 @@
-Last reviewed: 05/20/2016
+Last reviewed: 08/20/2018
HPE iLO NMI Watchdog Driver
- NMI sourcing for iLO based ProLiant Servers
- Documentation and Driver by
- Thomas Mingarelli
+ for iLO based ProLiant Servers
The HPE iLO NMI Watchdog driver is a kernel module that provides basic
- watchdog functionality and the added benefit of NMI sourcing. Both the
- watchdog functionality and the NMI sourcing capability need to be enabled
- by the user. Remember that the two modes are not dependent on one another.
- A user can have the NMI sourcing without the watchdog timer and vice-versa.
+ watchdog functionality and handler for the iLO "Generate NMI to System"
+ virtual button.
+
All references to iLO in this document imply it also works on iLO2 and all
subsequent generations.
@@ -21,12 +18,16 @@ Last reviewed: 05/20/2016
not be updated in a timely fashion and a hardware system reset (also known as
an Automatic Server Recovery (ASR)) event will occur.
- The hpwdt driver also has three (3) module parameters. They are the following:
+ The hpwdt driver also has the following module parameters:
soft_margin - allows the user to set the watchdog timer value.
Default value is 30 seconds.
- allow_kdump - allows the user to save off a kernel dump image after an NMI.
- Default value is 1/ON
+ timeout - an alias of soft_margin.
+ pretimeout - allows the user to set the watchdog pretimeout value.
+ This is the number of seconds before timeout when an
+ NMI is delivered to the system. Setting the value to
+ zero disables the pretimeout NMI.
+ Default value is 9 seconds.
nowayout - basic watchdog parameter that does not allow the timer to
be restarted or an impending ASR to be escaped.
Default value is set when compiling the kernel. If it is set
@@ -37,61 +38,29 @@ Last reviewed: 05/20/2016
interface to /dev/watchdog can be found in
Documentation/watchdog/watchdog-api.txt and Documentation/IPMI.txt.
- The NMI sourcing capability is disabled by default due to the inability to
- distinguish between "NMI Watchdog Ticks" and "HW generated NMI events" in the
- Linux kernel. What this means is that the hpwdt nmi handler code is called
- each time the NMI signal fires off. This could amount to several thousands of
- NMIs in a matter of seconds. If a user sees the Linux kernel's "dazed and
- confused" message in the logs or if the system gets into a hung state, then
- the hpwdt driver can be reloaded.
-
- 1. If the kernel has not been booted with nmi_watchdog turned off then
- edit and place the nmi_watchdog=0 at the end of the currently booting
- kernel line. Depending on your Linux distribution and platform setup:
- For non-UEFI systems
- /boot/grub/grub.conf or
- /boot/grub/menu.lst
- For UEFI systems
- /boot/efi/EFI/distroname/grub.conf or
- /boot/efi/efi/distroname/elilo.conf
- 2. reboot the sever
- 3. Once the system comes up perform a modprobe -r hpwdt
- 4. modprobe /lib/modules/`uname -r`/kernel/drivers/watchdog/hpwdt.ko
-
- Now, the hpwdt can successfully receive and source the NMI and provide a log
- message that details the reason for the NMI (as determined by the HPE BIOS).
-
- Below is a list of NMIs the HPE BIOS understands along with the associated
- code (reason):
-
- No source found 00h
-
- Uncorrectable Memory Error 01h
-
- ASR NMI 1Bh
-
- PCI Parity Error 20h
-
- NMI Button Press 27h
-
- SB_BUS_NMI 28h
-
- ILO Doorbell NMI 29h
-
- ILO IOP NMI 2Ah
-
- ILO Watchdog NMI 2Bh
-
- Proc Throt NMI 2Ch
+ Due to limitations in the iLO hardware, the NMI pretimeout if enabled,
+ can only be set to 9 seconds. Attempts to set pretimeout to other
+ non-zero values will be rounded, possibly to zero. Users should verify
+ the pretimeout value after attempting to set pretimeout or timeout.
- Front Side Bus NMI 2Dh
+ Upon receipt of an NMI from the iLO, the hpwdt driver will initiate a
+ panic. This is to allow for a crash dump to be collected. It is incumbent
+ upon the user to have properly configured the system for kdump.
- PCI Express Error 2Fh
+ The default Linux kernel behavior upon panic is to print a kernel tombstone
+ and loop forever. This is generally not what a watchdog user wants.
- DMA controller NMI 30h
+ For those wishing to learn more please see:
+ Documentation/kdump/kdump.txt
+ Documentation/admin-guide/kernel-parameters.txt (panic=)
+ Your Linux Distribution specific documentation.
- Hypertransport/CSI Error 31h
+ If the hpwdt does not receive the NMI associated with an expiring timer,
+ the iLO will proceed to reset the system at timeout if the timer hasn't
+ been updated.
+--
+ The HPE iLO NMI Watchdog Driver and documentation were originally developed
+ by Tom Mingarelli.
- -- Tom Mingarelli
diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt
index 6d6200ea27b8..0b88e333f9e1 100644
--- a/Documentation/watchdog/watchdog-parameters.txt
+++ b/Documentation/watchdog/watchdog-parameters.txt
@@ -40,6 +40,11 @@ margin: Watchdog margin in seconds (default=60)
nowayout: Disable watchdog shutdown on close
(default=kernel config parameter)
-------------------------------------------------
+armada_37xx_wdt:
+timeout: Watchdog timeout in seconds. (default=120)
+nowayout: Disable watchdog shutdown on close
+ (default=kernel config parameter)
+-------------------------------------------------
at91rm9200_wdt:
wdt_time: Watchdog time in seconds. (default=5)
nowayout: Watchdog cannot be stopped once started
diff --git a/Documentation/x86/00-INDEX b/Documentation/x86/00-INDEX
deleted file mode 100644
index 3bb2ee3edcd1..000000000000
--- a/Documentation/x86/00-INDEX
+++ /dev/null
@@ -1,20 +0,0 @@
-00-INDEX
- - this file
-boot.txt
- - List of boot protocol versions
-earlyprintk.txt
- - Using earlyprintk with a USB2 debug port key.
-entry_64.txt
- - Describe (some of the) kernel entry points for x86.
-exception-tables.txt
- - why and how Linux kernel uses exception tables on x86
-microcode.txt
- - How to load microcode from an initrd-CPIO archive early to fix CPU issues.
-mtrr.txt
- - how to use x86 Memory Type Range Registers to increase performance
-pat.txt
- - Page Attribute Table intro and API
-usb-legacy-support.txt
- - how to fix/avoid quirks when using emulated PS/2 mouse/keyboard.
-zero-page.txt
- - layout of the first page of memory.
diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
index 5e9b826b5f62..7727db8f94bc 100644
--- a/Documentation/x86/boot.txt
+++ b/Documentation/x86/boot.txt
@@ -61,6 +61,18 @@ Protocol 2.12: (Kernel 3.8) Added the xloadflags field and extension fields
to struct boot_params for loading bzImage and ramdisk
above 4G in 64bit.
+Protocol 2.13: (Kernel 3.14) Support 32- and 64-bit flags being set in
+ xloadflags to support booting a 64-bit kernel from 32-bit
+ EFI
+
+Protocol 2.14: (Kernel 4.20) Added acpi_rsdp_addr holding the physical
+ address of the ACPI RSDP table.
+ The bootloader updates version with:
+ 0x8000 | min(kernel-version, bootloader-version)
+ kernel-version being the protocol version supported by
+ the kernel and bootloader-version the protocol version
+ supported by the bootloader.
+
**** MEMORY LAYOUT
The traditional memory map for the kernel loader, used for Image or
@@ -197,6 +209,7 @@ Offset Proto Name Meaning
0258/8 2.10+ pref_address Preferred loading address
0260/4 2.10+ init_size Linear memory required during initialization
0264/4 2.11+ handover_offset Offset of handover entry point
+0268/8 2.14+ acpi_rsdp_addr Physical address of RSDP table
(1) For backwards compatibility, if the setup_sects field contains 0, the
real value is 4.
@@ -309,7 +322,7 @@ Protocol: 2.00+
Contains the magic number "HdrS" (0x53726448).
Field name: version
-Type: read
+Type: modify
Offset/size: 0x206/2
Protocol: 2.00+
@@ -317,6 +330,12 @@ Protocol: 2.00+
e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version
10.17.
+ Up to protocol version 2.13 this information is only read by the
+ bootloader. From protocol version 2.14 onwards the bootloader will
+ write the used protocol version or-ed with 0x8000 to the field. The
+ used protocol version will be the minimum of the supported protocol
+ versions of the bootloader and the kernel.
+
Field name: realmode_swtch
Type: modify (optional)
Offset/size: 0x208/4
@@ -744,6 +763,17 @@ Offset/size: 0x264/4
See EFI HANDOVER PROTOCOL below for more details.
+Field name: acpi_rsdp_addr
+Type: write
+Offset/size: 0x268/8
+Protocol: 2.14+
+
+ This field can be set by the boot loader to tell the kernel the
+ physical address of the ACPI RSDP table.
+
+ A value of 0 indicates the kernel should fall back to the standard
+ methods to locate the RSDP.
+
**** THE IMAGE CHECKSUM
diff --git a/Documentation/x86/intel_rdt_ui.txt b/Documentation/x86/intel_rdt_ui.txt
index f662d3c530e5..52b10945ff75 100644
--- a/Documentation/x86/intel_rdt_ui.txt
+++ b/Documentation/x86/intel_rdt_ui.txt
@@ -520,18 +520,24 @@ the pseudo-locked region:
2) Cache hit and miss measurements using model specific precision counters if
available. Depending on the levels of cache on the system the pseudo_lock_l2
and pseudo_lock_l3 tracepoints are available.
- WARNING: triggering this measurement uses from two (for just L2
- measurements) to four (for L2 and L3 measurements) precision counters on
- the system, if any other measurements are in progress the counters and
- their corresponding event registers will be clobbered.
When a pseudo-locked region is created a new debugfs directory is created for
it in debugfs as /sys/kernel/debug/resctrl/<newdir>. A single
write-only file, pseudo_lock_measure, is present in this directory. The
-measurement on the pseudo-locked region depends on the number, 1 or 2,
-written to this debugfs file. Since the measurements are recorded with the
-tracing infrastructure the relevant tracepoints need to be enabled before the
-measurement is triggered.
+measurement of the pseudo-locked region depends on the number written to this
+debugfs file:
+1 - writing "1" to the pseudo_lock_measure file will trigger the latency
+ measurement captured in the pseudo_lock_mem_latency tracepoint. See
+ example below.
+2 - writing "2" to the pseudo_lock_measure file will trigger the L2 cache
+ residency (cache hits and misses) measurement captured in the
+ pseudo_lock_l2 tracepoint. See example below.
+3 - writing "3" to the pseudo_lock_measure file will trigger the L3 cache
+ residency (cache hits and misses) measurement captured in the
+ pseudo_lock_l3 tracepoint.
+
+All measurements are recorded with the tracing infrastructure. This requires
+the relevant tracepoints to be enabled before the measurement is triggered.
Example of latency debugging interface:
In this example a pseudo-locked region named "newlock" was created. Here is
diff --git a/Documentation/x86/pat.txt b/Documentation/x86/pat.txt
index 2a4ee6302122..481d8d8536ac 100644
--- a/Documentation/x86/pat.txt
+++ b/Documentation/x86/pat.txt
@@ -90,12 +90,12 @@ pci proc | -- | -- | WC |
Advanced APIs for drivers
-------------------------
A. Exporting pages to users with remap_pfn_range, io_remap_pfn_range,
-vm_insert_pfn
+vmf_insert_pfn
Drivers wanting to export some pages to userspace do it by using mmap
interface and a combination of
1) pgprot_noncached()
-2) io_remap_pfn_range() or remap_pfn_range() or vm_insert_pfn()
+2) io_remap_pfn_range() or remap_pfn_range() or vmf_insert_pfn()
With PAT support, a new API pgprot_writecombine is being added. So, drivers can
continue to use the above sequence, with either pgprot_noncached() or
diff --git a/Documentation/x86/x86_64/00-INDEX b/Documentation/x86/x86_64/00-INDEX
deleted file mode 100644
index 92fc20ab5f0e..000000000000
--- a/Documentation/x86/x86_64/00-INDEX
+++ /dev/null
@@ -1,16 +0,0 @@
-00-INDEX
- - This file
-boot-options.txt
- - AMD64-specific boot options.
-cpu-hotplug-spec
- - Firmware support for CPU hotplug under Linux/x86-64
-fake-numa-for-cpusets
- - Using numa=fake and CPUSets for Resource Management
-kernel-stacks
- - Context-specific per-processor interrupt stacks.
-machinecheck
- - Configurable sysfs parameters for the x86-64 machine check code.
-mm.txt
- - Memory layout of x86-64 (4 level page tables, 46 bits physical).
-uefi.txt
- - Booting Linux via Unified Extensible Firmware Interface.
diff --git a/Documentation/x86/x86_64/mm.txt b/Documentation/x86/x86_64/mm.txt
index 5432a96d31ff..73aaaa3da436 100644
--- a/Documentation/x86/x86_64/mm.txt
+++ b/Documentation/x86/x86_64/mm.txt
@@ -1,55 +1,124 @@
+====================================================
+Complete virtual memory map with 4-level page tables
+====================================================
-Virtual memory map with 4 level page tables:
-
-0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm
-hole caused by [47:63] sign extension
-ffff800000000000 - ffff87ffffffffff (=43 bits) guard hole, reserved for hypervisor
-ffff880000000000 - ffffc7ffffffffff (=64 TB) direct mapping of all phys. memory
-ffffc80000000000 - ffffc8ffffffffff (=40 bits) hole
-ffffc90000000000 - ffffe8ffffffffff (=45 bits) vmalloc/ioremap space
-ffffe90000000000 - ffffe9ffffffffff (=40 bits) hole
-ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB)
-... unused hole ...
-ffffec0000000000 - fffffbffffffffff (=44 bits) kasan shadow memory (16TB)
-... unused hole ...
- vaddr_end for KASLR
-fffffe0000000000 - fffffe7fffffffff (=39 bits) cpu_entry_area mapping
-fffffe8000000000 - fffffeffffffffff (=39 bits) LDT remap for PTI
-ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
-... unused hole ...
-ffffffef00000000 - fffffffeffffffff (=64 GB) EFI region mapping space
-... unused hole ...
-ffffffff80000000 - ffffffff9fffffff (=512 MB) kernel text mapping, from phys 0
-ffffffffa0000000 - fffffffffeffffff (1520 MB) module mapping space
-[fixmap start] - ffffffffff5fffff kernel-internal fixmap range
-ffffffffff600000 - ffffffffff600fff (=4 kB) legacy vsyscall ABI
-ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole
-
-Virtual memory map with 5 level page tables:
-
-0000000000000000 - 00ffffffffffffff (=56 bits) user space, different per mm
-hole caused by [56:63] sign extension
-ff00000000000000 - ff0fffffffffffff (=52 bits) guard hole, reserved for hypervisor
-ff10000000000000 - ff8fffffffffffff (=55 bits) direct mapping of all phys. memory
-ff90000000000000 - ff9fffffffffffff (=52 bits) LDT remap for PTI
-ffa0000000000000 - ffd1ffffffffffff (=54 bits) vmalloc/ioremap space (12800 TB)
-ffd2000000000000 - ffd3ffffffffffff (=49 bits) hole
-ffd4000000000000 - ffd5ffffffffffff (=49 bits) virtual memory map (512TB)
-... unused hole ...
-ffdf000000000000 - fffffc0000000000 (=53 bits) kasan shadow memory (8PB)
-... unused hole ...
- vaddr_end for KASLR
-fffffe0000000000 - fffffe7fffffffff (=39 bits) cpu_entry_area mapping
-... unused hole ...
-ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
-... unused hole ...
-ffffffef00000000 - fffffffeffffffff (=64 GB) EFI region mapping space
-... unused hole ...
-ffffffff80000000 - ffffffff9fffffff (=512 MB) kernel text mapping, from phys 0
-ffffffffa0000000 - fffffffffeffffff (1520 MB) module mapping space
-[fixmap start] - ffffffffff5fffff kernel-internal fixmap range
-ffffffffff600000 - ffffffffff600fff (=4 kB) legacy vsyscall ABI
-ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole
+Notes:
+
+ - Negative addresses such as "-23 TB" are absolute addresses in bytes, counted down
+ from the top of the 64-bit address space. It's easier to understand the layout
+ when seen both in absolute addresses and in distance-from-top notation.
+
+ For example 0xffffe90000000000 == -23 TB, it's 23 TB lower than the top of the
+ 64-bit address space (ffffffffffffffff).
+
+ Note that as we get closer to the top of the address space, the notation changes
+ from TB to GB and then MB/KB.
+
+ - "16M TB" might look weird at first sight, but it's an easier to visualize size
+ notation than "16 EB", which few will recognize at first sight as 16 exabytes.
+ It also shows it nicely how incredibly large 64-bit address space is.
+
+========================================================================================================================
+ Start addr | Offset | End addr | Size | VM area description
+========================================================================================================================
+ | | | |
+ 0000000000000000 | 0 | 00007fffffffffff | 128 TB | user-space virtual memory, different per mm
+__________________|____________|__________________|_________|___________________________________________________________
+ | | | |
+ 0000800000000000 | +128 TB | ffff7fffffffffff | ~16M TB | ... huge, almost 64 bits wide hole of non-canonical
+ | | | | virtual memory addresses up to the -128 TB
+ | | | | starting offset of kernel mappings.
+__________________|____________|__________________|_________|___________________________________________________________
+ |
+ | Kernel-space virtual memory, shared between all processes:
+____________________________________________________________|___________________________________________________________
+ | | | |
+ ffff800000000000 | -128 TB | ffff87ffffffffff | 8 TB | ... guard hole, also reserved for hypervisor
+ ffff880000000000 | -120 TB | ffffc7ffffffffff | 64 TB | direct mapping of all physical memory (page_offset_base)
+ ffffc80000000000 | -56 TB | ffffc8ffffffffff | 1 TB | ... unused hole
+ ffffc90000000000 | -55 TB | ffffe8ffffffffff | 32 TB | vmalloc/ioremap space (vmalloc_base)
+ ffffe90000000000 | -23 TB | ffffe9ffffffffff | 1 TB | ... unused hole
+ ffffea0000000000 | -22 TB | ffffeaffffffffff | 1 TB | virtual memory map (vmemmap_base)
+ ffffeb0000000000 | -21 TB | ffffebffffffffff | 1 TB | ... unused hole
+ ffffec0000000000 | -20 TB | fffffbffffffffff | 16 TB | KASAN shadow memory
+ fffffc0000000000 | -4 TB | fffffdffffffffff | 2 TB | ... unused hole
+ | | | | vaddr_end for KASLR
+ fffffe0000000000 | -2 TB | fffffe7fffffffff | 0.5 TB | cpu_entry_area mapping
+ fffffe8000000000 | -1.5 TB | fffffeffffffffff | 0.5 TB | LDT remap for PTI
+ ffffff0000000000 | -1 TB | ffffff7fffffffff | 0.5 TB | %esp fixup stacks
+__________________|____________|__________________|_________|____________________________________________________________
+ |
+ | Identical layout to the 47-bit one from here on:
+____________________________________________________________|____________________________________________________________
+ | | | |
+ ffffff8000000000 | -512 GB | ffffffeeffffffff | 444 GB | ... unused hole
+ ffffffef00000000 | -68 GB | fffffffeffffffff | 64 GB | EFI region mapping space
+ ffffffff00000000 | -4 GB | ffffffff7fffffff | 2 GB | ... unused hole
+ ffffffff80000000 | -2 GB | ffffffff9fffffff | 512 MB | kernel text mapping, mapped to physical address 0
+ ffffffff80000000 |-2048 MB | | |
+ ffffffffa0000000 |-1536 MB | fffffffffeffffff | 1520 MB | module mapping space
+ ffffffffff000000 | -16 MB | | |
+ FIXADDR_START | ~-11 MB | ffffffffff5fffff | ~0.5 MB | kernel-internal fixmap range, variable size and offset
+ ffffffffff600000 | -10 MB | ffffffffff600fff | 4 kB | legacy vsyscall ABI
+ ffffffffffe00000 | -2 MB | ffffffffffffffff | 2 MB | ... unused hole
+__________________|____________|__________________|_________|___________________________________________________________
+
+
+====================================================
+Complete virtual memory map with 5-level page tables
+====================================================
+
+Notes:
+
+ - With 56-bit addresses, user-space memory gets expanded by a factor of 512x,
+ from 0.125 PB to 64 PB. All kernel mappings shift down to the -64 PT starting
+ offset and many of the regions expand to support the much larger physical
+ memory supported.
+
+========================================================================================================================
+ Start addr | Offset | End addr | Size | VM area description
+========================================================================================================================
+ | | | |
+ 0000000000000000 | 0 | 00ffffffffffffff | 64 PB | user-space virtual memory, different per mm
+__________________|____________|__________________|_________|___________________________________________________________
+ | | | |
+ 0000800000000000 | +64 PB | ffff7fffffffffff | ~16K PB | ... huge, still almost 64 bits wide hole of non-canonical
+ | | | | virtual memory addresses up to the -128 TB
+ | | | | starting offset of kernel mappings.
+__________________|____________|__________________|_________|___________________________________________________________
+ |
+ | Kernel-space virtual memory, shared between all processes:
+____________________________________________________________|___________________________________________________________
+ | | | |
+ ff00000000000000 | -64 PB | ff0fffffffffffff | 4 PB | ... guard hole, also reserved for hypervisor
+ ff10000000000000 | -60 PB | ff8fffffffffffff | 32 PB | direct mapping of all physical memory (page_offset_base)
+ ff90000000000000 | -28 PB | ff9fffffffffffff | 4 PB | LDT remap for PTI
+ ffa0000000000000 | -24 PB | ffd1ffffffffffff | 12.5 PB | vmalloc/ioremap space (vmalloc_base)
+ ffd2000000000000 | -11.5 PB | ffd3ffffffffffff | 0.5 PB | ... unused hole
+ ffd4000000000000 | -11 PB | ffd5ffffffffffff | 0.5 PB | virtual memory map (vmemmap_base)
+ ffd6000000000000 | -10.5 PB | ffdeffffffffffff | 2.25 PB | ... unused hole
+ ffdf000000000000 | -8.25 PB | fffffdffffffffff | ~8 PB | KASAN shadow memory
+ fffffc0000000000 | -4 TB | fffffdffffffffff | 2 TB | ... unused hole
+ | | | | vaddr_end for KASLR
+ fffffe0000000000 | -2 TB | fffffe7fffffffff | 0.5 TB | cpu_entry_area mapping
+ fffffe8000000000 | -1.5 TB | fffffeffffffffff | 0.5 TB | ... unused hole
+ ffffff0000000000 | -1 TB | ffffff7fffffffff | 0.5 TB | %esp fixup stacks
+__________________|____________|__________________|_________|____________________________________________________________
+ |
+ | Identical layout to the 47-bit one from here on:
+____________________________________________________________|____________________________________________________________
+ | | | |
+ ffffff8000000000 | -512 GB | ffffffeeffffffff | 444 GB | ... unused hole
+ ffffffef00000000 | -68 GB | fffffffeffffffff | 64 GB | EFI region mapping space
+ ffffffff00000000 | -4 GB | ffffffff7fffffff | 2 GB | ... unused hole
+ ffffffff80000000 | -2 GB | ffffffff9fffffff | 512 MB | kernel text mapping, mapped to physical address 0
+ ffffffff80000000 |-2048 MB | | |
+ ffffffffa0000000 |-1536 MB | fffffffffeffffff | 1520 MB | module mapping space
+ ffffffffff000000 | -16 MB | | |
+ FIXADDR_START | ~-11 MB | ffffffffff5fffff | ~0.5 MB | kernel-internal fixmap range, variable size and offset
+ ffffffffff600000 | -10 MB | ffffffffff600fff | 4 kB | legacy vsyscall ABI
+ ffffffffffe00000 | -2 MB | ffffffffffffffff | 2 MB | ... unused hole
+__________________|____________|__________________|_________|___________________________________________________________
Architecture defines a 64-bit virtual address. Implementations can support
less. Currently supported are 48- and 57-bit virtual addresses. Bits 63
@@ -77,3 +146,6 @@ Their order is preserved but their base will be offset early at boot time.
Be very careful vs. KASLR when changing anything here. The KASLR address
range must not overlap with anything except the KASAN shadow area, which is
correct as KASAN disables KASLR.
+
+For both 4- and 5-level layouts, the STACKLEAK_POISON value in the last 2MB
+hole: ffffffffffff4111
diff --git a/Documentation/xilinx/eemi.txt b/Documentation/xilinx/eemi.txt
new file mode 100644
index 000000000000..0ab686c173be
--- /dev/null
+++ b/Documentation/xilinx/eemi.txt
@@ -0,0 +1,67 @@
+---------------------------------------------------------------------
+Xilinx Zynq MPSoC EEMI Documentation
+---------------------------------------------------------------------
+
+Xilinx Zynq MPSoC Firmware Interface
+-------------------------------------
+The zynqmp-firmware node describes the interface to platform firmware.
+ZynqMP has an interface to communicate with secure firmware. Firmware
+driver provides an interface to firmware APIs. Interface APIs can be
+used by any driver to communicate with PMC(Platform Management Controller).
+
+Embedded Energy Management Interface (EEMI)
+----------------------------------------------
+The embedded energy management interface is used to allow software
+components running across different processing clusters on a chip or
+device to communicate with a power management controller (PMC) on a
+device to issue or respond to power management requests.
+
+EEMI ops is a structure containing all eemi APIs supported by Zynq MPSoC.
+The zynqmp-firmware driver maintain all EEMI APIs in zynqmp_eemi_ops
+structure. Any driver who want to communicate with PMC using EEMI APIs
+can call zynqmp_pm_get_eemi_ops().
+
+Example of EEMI ops:
+
+ /* zynqmp-firmware driver maintain all EEMI APIs */
+ struct zynqmp_eemi_ops {
+ int (*get_api_version)(u32 *version);
+ int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
+ };
+
+ static const struct zynqmp_eemi_ops eemi_ops = {
+ .get_api_version = zynqmp_pm_get_api_version,
+ .query_data = zynqmp_pm_query_data,
+ };
+
+Example of EEMI ops usage:
+
+ static const struct zynqmp_eemi_ops *eemi_ops;
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ eemi_ops = zynqmp_pm_get_eemi_ops();
+ if (!eemi_ops)
+ return -ENXIO;
+
+ ret = eemi_ops->query_data(qdata, ret_payload);
+
+IOCTL
+------
+IOCTL API is for device control and configuration. It is not a system
+IOCTL but it is an EEMI API. This API can be used by master to control
+any device specific configuration. IOCTL definitions can be platform
+specific. This API also manage shared device configuration.
+
+The following IOCTL IDs are valid for device control:
+- IOCTL_SET_PLL_FRAC_MODE 8
+- IOCTL_GET_PLL_FRAC_MODE 9
+- IOCTL_SET_PLL_FRAC_DATA 10
+- IOCTL_GET_PLL_FRAC_DATA 11
+
+Refer EEMI API guide [0] for IOCTL specific parameters and other EEMI APIs.
+
+References
+----------
+[0] Embedded Energy Management Interface (EEMI) API guide:
+ https://www.xilinx.com/support/documentation/user_guides/ug1200-eemi-api.pdf