diff options
Diffstat (limited to 'Documentation')
7 files changed, 32 insertions, 67 deletions
diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml index a1e71c974e79..f096f286da19 100644 --- a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml @@ -62,6 +62,8 @@ properties: interrupt-controller: true + gpio-ranges: true + wakeup-source: type: boolean description: > @@ -88,6 +90,7 @@ examples: interrupt-parent = <&irq0_intc>; interrupts = <0x6>; brcm,gpio-bank-widths = <32 32 32 24>; + gpio-ranges = <&pinctrl 0 0 120>; }; upg_gio_aon: gpio@f04172c0 { diff --git a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml index d481e78958a7..d61569b3f15b 100644 --- a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml @@ -14,6 +14,7 @@ properties: items: - enum: - microchip,mpfs-gpio + - microchip,coregpio-rtl-v3 reg: maxItems: 1 @@ -43,6 +44,7 @@ properties: default: 32 gpio-controller: true + gpio-line-names: true patternProperties: "^.+-hog(-[0-9]+)?$": @@ -62,12 +64,21 @@ patternProperties: - gpio-hog - gpios +allOf: + - if: + properties: + compatible: + contains: + const: microchip,mpfs-gpio + then: + required: + - interrupts + - "#interrupt-cells" + - interrupt-controller + required: - compatible - reg - - interrupts - - "#interrupt-cells" - - interrupt-controller - "#gpio-cells" - gpio-controller - clocks diff --git a/Documentation/driver-api/gpio/driver.rst b/Documentation/driver-api/gpio/driver.rst index bf6319cc531b..e541bd2e898b 100644 --- a/Documentation/driver-api/gpio/driver.rst +++ b/Documentation/driver-api/gpio/driver.rst @@ -7,7 +7,7 @@ This document serves as a guide for writers of GPIO chip drivers. Each GPIO controller driver needs to include the following header, which defines the structures used to define a GPIO driver:: - #include <linux/gpio/driver.h> + #include <linux/gpio/driver.h> Internal Representation of GPIOs @@ -144,7 +144,7 @@ is not open, it will present a high-impedance (tristate) to the external rail:: in ----|| |/ ||--+ in ----| | |\ - GND GND + GND GND This configuration is normally used as a way to achieve one of two things: @@ -550,10 +550,10 @@ the interrupt separately and go with it: struct my_gpio *g; struct gpio_irq_chip *girq; - ret = devm_request_threaded_irq(dev, irq, NULL, - irq_thread_fn, IRQF_ONESHOT, "my-chip", g); + ret = devm_request_threaded_irq(dev, irq, NULL, irq_thread_fn, + IRQF_ONESHOT, "my-chip", g); if (ret < 0) - return ret; + return ret; /* Get a pointer to the gpio_irq_chip */ girq = &g->gc.irq; @@ -681,12 +681,12 @@ certain operations and keep track of usage inside of the gpiolib subsystem. Input GPIOs can be used as IRQ signals. When this happens, a driver is requested to mark the GPIO as being used as an IRQ:: - int gpiochip_lock_as_irq(struct gpio_chip *chip, unsigned int offset) + int gpiochip_lock_as_irq(struct gpio_chip *chip, unsigned int offset) This will prevent the use of non-irq related GPIO APIs until the GPIO IRQ lock is released:: - void gpiochip_unlock_as_irq(struct gpio_chip *chip, unsigned int offset) + void gpiochip_unlock_as_irq(struct gpio_chip *chip, unsigned int offset) When implementing an irqchip inside a GPIO driver, these two functions should typically be called in the .startup() and .shutdown() callbacks from the @@ -708,12 +708,12 @@ When a GPIO is used as an IRQ signal, then gpiolib also needs to know if the IRQ is enabled or disabled. In order to inform gpiolib about this, the irqchip driver should call:: - void gpiochip_disable_irq(struct gpio_chip *chip, unsigned int offset) + void gpiochip_disable_irq(struct gpio_chip *chip, unsigned int offset) This allows drivers to drive the GPIO as an output while the IRQ is disabled. When the IRQ is enabled again, a driver should call:: - void gpiochip_enable_irq(struct gpio_chip *chip, unsigned int offset) + void gpiochip_enable_irq(struct gpio_chip *chip, unsigned int offset) When implementing an irqchip inside a GPIO driver, these two functions should typically be called in the .irq_disable() and .irq_enable() callbacks from the @@ -763,12 +763,12 @@ Sometimes it is useful to allow a GPIO chip driver to request its own GPIO descriptors through the gpiolib API. A GPIO driver can use the following functions to request and free descriptors:: - struct gpio_desc *gpiochip_request_own_desc(struct gpio_desc *desc, - u16 hwnum, - const char *label, - enum gpiod_flags flags) + struct gpio_desc *gpiochip_request_own_desc(struct gpio_desc *desc, + u16 hwnum, + const char *label, + enum gpiod_flags flags) - void gpiochip_free_own_desc(struct gpio_desc *desc) + void gpiochip_free_own_desc(struct gpio_desc *desc) Descriptors requested with gpiochip_request_own_desc() must be released with gpiochip_free_own_desc(). diff --git a/Documentation/driver-api/gpio/legacy.rst b/Documentation/driver-api/gpio/legacy.rst index b6505914791c..534dfe95d128 100644 --- a/Documentation/driver-api/gpio/legacy.rst +++ b/Documentation/driver-api/gpio/legacy.rst @@ -225,8 +225,6 @@ setup or driver probe/teardown code, so this is an easy constraint.):: gpio_request() ## gpio_request_one() - ## gpio_request_array() - ## gpio_free_array() gpio_free() @@ -295,14 +293,6 @@ are claimed, three additional calls are defined:: */ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label); - /* request multiple GPIOs in a single call - */ - int gpio_request_array(struct gpio *array, size_t num); - - /* release multiple GPIOs in a single call - */ - void gpio_free_array(struct gpio *array, size_t num); - where 'flags' is currently defined to specify the following properties: * GPIOF_DIR_IN - to configure direction as input @@ -341,12 +331,6 @@ A typical example of usage:: if (err) ... - err = gpio_request_array(leds_gpios, ARRAY_SIZE(leds_gpios)); - if (err) - ... - - gpio_free_array(leds_gpios, ARRAY_SIZE(leds_gpios)); - GPIOs mapped to IRQs -------------------- diff --git a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst index aeccff777170..0faf042001d2 100644 --- a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst +++ b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst @@ -208,8 +208,6 @@ GPIO 值的命令需要等待其信息排到队首才发送命令，再获得其 gpio_request() ## gpio_request_one() - ## gpio_request_array() - ## gpio_free_array() gpio_free() @@ -272,14 +270,6 @@ gpio_request()前将这类细节配置好，例如使用引脚控制子系统的 */ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label); - /* 在单个函数中申请多个 GPIO - */ - int gpio_request_array(struct gpio *array, size_t num); - - /* 在单个函数中释放多个 GPIO - */ - void gpio_free_array(struct gpio *array, size_t num); - 这里 'flags' 当前定义可指定以下属性: * GPIOF_DIR_IN - 配置方向为输入 @@ -317,12 +307,6 @@ gpio_request()前将这类细节配置好，例如使用引脚控制子系统的 if (err) ... - err = gpio_request_array(leds_gpios, ARRAY_SIZE(leds_gpios)); - if (err) - ... - - gpio_free_array(leds_gpios, ARRAY_SIZE(leds_gpios)); - GPIO 映射到 IRQ ---------------- diff --git a/Documentation/translations/zh_TW/gpio.txt b/Documentation/translations/zh_TW/gpio.txt index b9b48012c62e..77d69d381316 100644 --- a/Documentation/translations/zh_TW/gpio.txt +++ b/Documentation/translations/zh_TW/gpio.txt @@ -215,13 +215,10 @@ GPIO 值的命令需要等待其信息排到隊首才發送命令，再獲得其 gpio_request() ## gpio_request_one() -## gpio_request_array() -## gpio_free_array() gpio_free() - 聲明和釋放 GPIO ---------------------------- 爲了有助於捕獲系統配置錯誤,定義了兩個函數。 @@ -278,14 +275,6 @@ gpio_request()前將這類細節配置好，例如使用 pinctrl 子系統的映 */ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label); - /* 在單個函數中申請多個 GPIO - */ - int gpio_request_array(struct gpio *array, size_t num); - - /* 在單個函數中釋放多個 GPIO - */ - void gpio_free_array(struct gpio *array, size_t num); - 這裡 'flags' 當前定義可指定以下屬性: * GPIOF_DIR_IN - 配置方向爲輸入 @@ -323,12 +312,6 @@ gpio_request()前將這類細節配置好，例如使用 pinctrl 子系統的映 if (err) ... - err = gpio_request_array(leds_gpios, ARRAY_SIZE(leds_gpios)); - if (err) - ... - - gpio_free_array(leds_gpios, ARRAY_SIZE(leds_gpios)); - GPIO 映射到 IRQ -------------------- diff --git a/Documentation/userspace-api/gpio/gpio-v2-get-line-ioctl.rst b/Documentation/userspace-api/gpio/gpio-v2-get-line-ioctl.rst index 56b975801b6a..6615d6ced755 100644 --- a/Documentation/userspace-api/gpio/gpio-v2-get-line-ioctl.rst +++ b/Documentation/userspace-api/gpio/gpio-v2-get-line-ioctl.rst @@ -81,7 +81,7 @@ Only one event clock flag, ``GPIO_V2_LINE_FLAG_EVENT_CLOCK_xxx``, may be set. If none are set then the event clock defaults to ``CLOCK_MONOTONIC``. The ``GPIO_V2_LINE_FLAG_EVENT_CLOCK_HTE`` flag requires supporting hardware and a kernel with ``CONFIG_HTE`` set. Requesting HTE from a device that -doesn't support it is an error (**EOPNOTSUP**). +doesn't support it is an error (**EOPNOTSUPP**). The :c:type:`debounce_period_us<gpio_v2_line_attribute>` attribute may only be applied to lines with ``GPIO_V2_LINE_FLAG_INPUT`` set. When set, debounce |