diff options
Diffstat (limited to 'Documentation')
389 files changed, 17726 insertions, 4067 deletions
diff --git a/Documentation/ABI/testing/debugfs-cros-ec b/Documentation/ABI/testing/debugfs-cros-ec index 1fe0add99a2a..9a040c6f5e03 100644 --- a/Documentation/ABI/testing/debugfs-cros-ec +++ b/Documentation/ABI/testing/debugfs-cros-ec @@ -54,3 +54,25 @@ Description: this feature. Output will be in the format: "0x%08x\n". + +What: /sys/kernel/debug/<cros-ec-device>/suspend_timeout_ms +Date: August 2022 +KernelVersion: 6.1 +Description: + Some ECs have a feature where they will track transitions of + a hardware-controlled sleep line, such as Intel's SLP_S0 line, + in order to detect cases where a system failed to go into deep + sleep states. The suspend_timeout_ms file controls the amount of + time in milliseconds the EC will wait before declaring a sleep + timeout event and attempting to wake the system. + + Supply 0 to use the default value coded into EC firmware. Supply + 65535 (EC_HOST_SLEEP_TIMEOUT_INFINITE) to disable the EC sleep + failure detection mechanism. Values in between 0 and 65535 + indicate the number of milliseconds the EC should wait after a + sleep transition before declaring a timeout. This includes both + the duration after a sleep command was received but before the + hardware line changed, as well as the duration between when the + hardware line changed and the kernel sent an EC resume command. + + Output will be in the format: "%u\n". diff --git a/Documentation/ABI/testing/sysfs-amd-pmc b/Documentation/ABI/testing/sysfs-amd-pmc new file mode 100644 index 000000000000..c421b72844f1 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-amd-pmc @@ -0,0 +1,13 @@ +What: /sys/bus/platform/drivers/amd_pmc/*/smu_fw_version +Date: October 2022 +Contact: Mario Limonciello <mario.limonciello@amd.com> +Description: Reading this file reports the version of the firmware loaded to + System Management Unit (SMU) contained in AMD CPUs and + APUs. + +What: /sys/bus/platform/drivers/amd_pmc/*/smu_program +Date: October 2022 +Contact: Mario Limonciello <mario.limonciello@amd.com> +Description: Reading this file reports the program corresponding to the SMU + firmware version. The program field is used to disambiguate two + APU/CPU models that can share the same firmware binary. diff --git a/Documentation/ABI/testing/sysfs-amd-pmf b/Documentation/ABI/testing/sysfs-amd-pmf new file mode 100644 index 000000000000..7fc0e1c2b76b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-amd-pmf @@ -0,0 +1,13 @@ +What: /sys/devices/platform/*/cnqf_enable +Date: September 2022 +Contact: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> +Description: Reading this file tells if the AMD Platform Management(PMF) + Cool n Quiet Framework(CnQF) feature is enabled or not. + + This feature is not enabled by default and gets only turned on + if OEM BIOS passes a "flag" to PMF ACPI function (index 11 or 12) + or in case the user writes "on". + + To turn off CnQF user can write "off" to the sysfs node. + Note: Systems that support auto mode will not have this sysfs file + available. diff --git a/Documentation/ABI/testing/sysfs-bus-bcma b/Documentation/ABI/testing/sysfs-bus-bcma index 721b4aea3020..e93d3ddca844 100644 --- a/Documentation/ABI/testing/sysfs-bus-bcma +++ b/Documentation/ABI/testing/sysfs-bus-bcma @@ -3,7 +3,7 @@ Date: May 2011 KernelVersion: 3.0 Contact: Rafał Miłecki <zajec5@gmail.com> Description: - Each BCMA core has it's manufacturer id. See + Each BCMA core has its manufacturer id. See include/linux/bcma/bcma.h for possible values. What: /sys/bus/bcma/devices/.../id diff --git a/Documentation/ABI/testing/sysfs-bus-fcoe b/Documentation/ABI/testing/sysfs-bus-fcoe index 8fe787cc4ab7..5a4f2091ac37 100644 --- a/Documentation/ABI/testing/sysfs-bus-fcoe +++ b/Documentation/ABI/testing/sysfs-bus-fcoe @@ -31,7 +31,7 @@ Description: 'FCoE Controller' instances on the fcoe bus. 1) Write interface name to ctlr_create 2) Configure the FCoE Controller (ctlr_X) 3) Enable the FCoE Controller to begin discovery and login. The FCoE Controller is destroyed by - writing it's name, i.e. ctlr_X to the ctlr_delete file. + writing its name, i.e. ctlr_X to the ctlr_delete file. Attributes: diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity b/Documentation/ABI/testing/sysfs-bus-iio-proximity index 3aac6dab8775..9b9d1cc9b703 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-proximity +++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity @@ -18,7 +18,7 @@ Description: on the signal from which time of flight measurements are taken. The appropriate values to take is dependent on both the - sensor and it's operating environment: + sensor and its operating environment: * as3935 (0-31 range) 18 = indoors (default) 14 = outdoors diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power index a9ce63cfbe87..e434fc523291 100644 --- a/Documentation/ABI/testing/sysfs-class-power +++ b/Documentation/ABI/testing/sysfs-class-power @@ -364,7 +364,10 @@ Date: April 2019 Contact: linux-pm@vger.kernel.org Description: Represents a battery percentage level, above which charging will - stop. + stop. Not all hardware is capable of setting this to an arbitrary + percentage. Drivers will round written values to the nearest + supported value. Reading back the value will show the actual + threshold set by the driver. Access: Read, Write diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 760c889b6cd1..f54867cadb0f 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -296,7 +296,7 @@ Description: Processor frequency boosting control This switch controls the boost setting for the whole system. Boosting allows the CPU and the firmware to run at a frequency - beyond it's nominal limit. + beyond its nominal limit. More details can be found in Documentation/admin-guide/pm/cpufreq.rst diff --git a/Documentation/ABI/testing/sysfs-platform-asus-wmi b/Documentation/ABI/testing/sysfs-platform-asus-wmi index 04885738cf15..a77a004a1baa 100644 --- a/Documentation/ABI/testing/sysfs-platform-asus-wmi +++ b/Documentation/ABI/testing/sysfs-platform-asus-wmi @@ -57,3 +57,44 @@ Description: * 0 - default, * 1 - overboost, * 2 - silent + +What: /sys/devices/platform/<platform>/gpu_mux_mode +Date: Aug 2022 +KernelVersion: 6.1 +Contact: "Luke Jones" <luke@ljones.dev> +Description: + Switch the GPU hardware MUX mode. Laptops with this feature can + can be toggled to boot with only the dGPU (discrete mode) or in + standard Optimus/Hybrid mode. On switch a reboot is required: + + * 0 - Discrete GPU, + * 1 - Optimus/Hybrid, + +What: /sys/devices/platform/<platform>/dgpu_disable +Date: Aug 2022 +KernelVersion: 5.17 +Contact: "Luke Jones" <luke@ljones.dev> +Description: + Disable discrete GPU: + * 0 - Enable dGPU, + * 1 - Disable dGPU + +What: /sys/devices/platform/<platform>/egpu_enable +Date: Aug 2022 +KernelVersion: 5.17 +Contact: "Luke Jones" <luke@ljones.dev> +Description: + Enable the external GPU paired with ROG X-Flow laptops. + Toggling this setting will also trigger ACPI to disable the dGPU: + + * 0 - Disable, + * 1 - Enable + +What: /sys/devices/platform/<platform>/panel_od +Date: Aug 2022 +KernelVersion: 5.17 +Contact: "Luke Jones" <luke@ljones.dev> +Description: + Enable an LCD response-time boost to reduce or remove ghosting: + * 0 - Disable, + * 1 - Enable diff --git a/Documentation/ABI/testing/sysfs-platform-chipidea-usb2 b/Documentation/ABI/testing/sysfs-platform-chipidea-usb2 index b0f4684a83fe..b9f7d924f28a 100644 --- a/Documentation/ABI/testing/sysfs-platform-chipidea-usb2 +++ b/Documentation/ABI/testing/sysfs-platform-chipidea-usb2 @@ -2,8 +2,8 @@ What: /sys/bus/platform/devices/ci_hdrc.0/role Date: Mar 2017 Contact: Peter Chen <peter.chen@nxp.com> Description: - It returns string "gadget" or "host" when read it, it indicates - current controller role. + When read, it returns string "gadget" or "host", indicating + the current controller role. - It will do role switch when write "gadget" or "host" to it. + It will do role switch when "gadget" or "host" is written to it. Only controller at dual-role configuration supports writing. diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index 90ec4987074b..f99d433ff311 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -152,7 +152,7 @@ Description: case further investigation is required to determine which device is causing the problem. Note that genuine RTC clock values (such as when pm_trace has not been used), can still - match a device and output it's name here. + match a device and output its name here. What: /sys/power/pm_async Date: January 2009 diff --git a/Documentation/RCU/checklist.rst b/Documentation/RCU/checklist.rst index 42cc5d891bd2..048c5bc1f813 100644 --- a/Documentation/RCU/checklist.rst +++ b/Documentation/RCU/checklist.rst @@ -66,8 +66,13 @@ over a rather long period of time, but improvements are always welcome! As a rough rule of thumb, any dereference of an RCU-protected pointer must be covered by rcu_read_lock(), rcu_read_lock_bh(), rcu_read_lock_sched(), or by the appropriate update-side lock. - Disabling of preemption can serve as rcu_read_lock_sched(), but - is less readable and prevents lockdep from detecting locking issues. + Explicit disabling of preemption (preempt_disable(), for example) + can serve as rcu_read_lock_sched(), but is less readable and + prevents lockdep from detecting locking issues. + + Please not that you *cannot* rely on code known to be built + only in non-preemptible kernels. Such code can and will break, + especially in kernels built with CONFIG_PREEMPT_COUNT=y. Letting RCU-protected pointers "leak" out of an RCU read-side critical section is every bit as bad as letting them leak out @@ -185,6 +190,9 @@ over a rather long period of time, but improvements are always welcome! 5. If call_rcu() or call_srcu() is used, the callback function will be called from softirq context. In particular, it cannot block. + If you need the callback to block, run that code in a workqueue + handler scheduled from the callback. The queue_rcu_work() + function does this for you in the case of call_rcu(). 6. Since synchronize_rcu() can block, it cannot be called from any sort of irq context. The same rule applies @@ -297,7 +305,8 @@ over a rather long period of time, but improvements are always welcome! the machine. d. Periodically invoke synchronize_rcu(), permitting a limited - number of updates per grace period. + number of updates per grace period. Better yet, periodically + invoke rcu_barrier() to wait for all outstanding callbacks. The same cautions apply to call_srcu() and kfree_rcu(). @@ -477,6 +486,6 @@ over a rather long period of time, but improvements are always welcome! So if you need to wait for both an RCU grace period and for all pre-existing call_rcu() callbacks, you will need to execute both rcu_barrier() and synchronize_rcu(), if necessary, using - something like workqueues to to execute them concurrently. + something like workqueues to execute them concurrently. See rcubarrier.rst for more information. diff --git a/Documentation/RCU/lockdep.rst b/Documentation/RCU/lockdep.rst index cc860a0c296b..a94f55991a71 100644 --- a/Documentation/RCU/lockdep.rst +++ b/Documentation/RCU/lockdep.rst @@ -61,7 +61,7 @@ checking of rcu_dereference() primitives: rcu_access_pointer(p): Return the value of the pointer and omit all barriers, but retain the compiler constraints that prevent duplicating - or coalescsing. This is useful when when testing the + or coalescsing. This is useful when testing the value of the pointer itself, for example, against NULL. The rcu_dereference_check() check expression can be any boolean diff --git a/Documentation/RCU/rcu_dereference.rst b/Documentation/RCU/rcu_dereference.rst index 0b418a5b243c..81e828c8313b 100644 --- a/Documentation/RCU/rcu_dereference.rst +++ b/Documentation/RCU/rcu_dereference.rst @@ -128,10 +128,16 @@ Follow these rules to keep your RCU code working properly: This sort of comparison occurs frequently when scanning RCU-protected circular linked lists. - Note that if checks for being within an RCU read-side - critical section are not required and the pointer is never - dereferenced, rcu_access_pointer() should be used in place - of rcu_dereference(). + Note that if the pointer comparison is done outside + of an RCU read-side critical section, and the pointer + is never dereferenced, rcu_access_pointer() should be + used in place of rcu_dereference(). In most cases, + it is best to avoid accidental dereferences by testing + the rcu_access_pointer() return value directly, without + assigning it to a variable. + + Within an RCU read-side critical section, there is little + reason to use rcu_access_pointer(). - The comparison is against a pointer that references memory that was initialized "a long time ago." The reason diff --git a/Documentation/RCU/whatisRCU.rst b/Documentation/RCU/whatisRCU.rst index 77ea260efd12..1c747ac3f2c8 100644 --- a/Documentation/RCU/whatisRCU.rst +++ b/Documentation/RCU/whatisRCU.rst @@ -6,13 +6,15 @@ What is RCU? -- "Read, Copy, Update" Please note that the "What is RCU?" LWN series is an excellent place to start learning about RCU: -| 1. What is RCU, Fundamentally? http://lwn.net/Articles/262464/ -| 2. What is RCU? Part 2: Usage http://lwn.net/Articles/263130/ -| 3. RCU part 3: the RCU API http://lwn.net/Articles/264090/ -| 4. The RCU API, 2010 Edition http://lwn.net/Articles/418853/ -| 2010 Big API Table http://lwn.net/Articles/419086/ -| 5. The RCU API, 2014 Edition http://lwn.net/Articles/609904/ -| 2014 Big API Table http://lwn.net/Articles/609973/ +| 1. What is RCU, Fundamentally? https://lwn.net/Articles/262464/ +| 2. What is RCU? Part 2: Usage https://lwn.net/Articles/263130/ +| 3. RCU part 3: the RCU API https://lwn.net/Articles/264090/ +| 4. The RCU API, 2010 Edition https://lwn.net/Articles/418853/ +| 2010 Big API Table https://lwn.net/Articles/419086/ +| 5. The RCU API, 2014 Edition https://lwn.net/Articles/609904/ +| 2014 Big API Table https://lwn.net/Articles/609973/ +| 6. The RCU API, 2019 Edition https://lwn.net/Articles/777036/ +| 2019 Big API Table https://lwn.net/Articles/777165/ What is RCU? @@ -915,13 +917,18 @@ which an RCU reference is held include: The understanding that RCU provides a reference that only prevents a change of type is particularly visible with objects allocated from a slab cache marked ``SLAB_TYPESAFE_BY_RCU``. RCU operations may yield a -reference to an object from such a cache that has been concurrently -freed and the memory reallocated to a completely different object, -though of the same type. In this case RCU doesn't even protect the -identity of the object from changing, only its type. So the object -found may not be the one expected, but it will be one where it is safe -to take a reference or spinlock and then confirm that the identity -matches the expectations. +reference to an object from such a cache that has been concurrently freed +and the memory reallocated to a completely different object, though of +the same type. In this case RCU doesn't even protect the identity of the +object from changing, only its type. So the object found may not be the +one expected, but it will be one where it is safe to take a reference +(and then potentially acquiring a spinlock), allowing subsequent code +to check whether the identity matches expectations. It is tempting +to simply acquire the spinlock without first taking the reference, but +unfortunately any spinlock in a ``SLAB_TYPESAFE_BY_RCU`` object must be +initialized after each and every call to kmem_cache_alloc(), which renders +reference-free spinlock acquisition completely unsafe. Therefore, when +using ``SLAB_TYPESAFE_BY_RCU``, make proper use of a reference counter. With traditional reference counting -- such as that implemented by the kref library in Linux -- there is typically code that runs when the last @@ -1057,14 +1064,20 @@ SRCU: Initialization/cleanup:: init_srcu_struct cleanup_srcu_struct -All: lockdep-checked RCU-protected pointer access:: +All: lockdep-checked RCU utility APIs:: - rcu_access_pointer - rcu_dereference_raw RCU_LOCKDEP_WARN rcu_sleep_check RCU_NONIDLE +All: Unchecked RCU-protected pointer access:: + + rcu_dereference_raw + +All: Unchecked RCU-protected pointer access with dereferencing prohibited:: + + rcu_access_pointer + See the comment headers in the source code (or the docbook generated from them) for more information. diff --git a/Documentation/admin-guide/README.rst b/Documentation/admin-guide/README.rst index caa3c09a5c3f..9a969c0157f1 100644 --- a/Documentation/admin-guide/README.rst +++ b/Documentation/admin-guide/README.rst @@ -1,9 +1,9 @@ .. _readme: -Linux kernel release 5.x <http://kernel.org/> +Linux kernel release 6.x <http://kernel.org/> ============================================= -These are the release notes for Linux version 5. Read them carefully, +These are the release notes for Linux version 6. Read them carefully, as they tell you what this is all about, explain how to install the kernel, and what to do if something goes wrong. @@ -63,7 +63,7 @@ Installing the kernel source directory where you have permissions (e.g. your home directory) and unpack it:: - xz -cd linux-5.x.tar.xz | tar xvf - + xz -cd linux-6.x.tar.xz | tar xvf - Replace "X" with the version number of the latest kernel. @@ -72,12 +72,12 @@ Installing the kernel source files. They should match the library, and not get messed up by whatever the kernel-du-jour happens to be. - - You can also upgrade between 5.x releases by patching. Patches are + - You can also upgrade between 6.x releases by patching. Patches are distributed in the xz format. To install by patching, get all the newer patch files, enter the top level directory of the kernel source - (linux-5.x) and execute:: + (linux-6.x) and execute:: - xz -cd ../patch-5.x.xz | patch -p1 + xz -cd ../patch-6.x.xz | patch -p1 Replace "x" for all versions bigger than the version "x" of your current source tree, **in_order**, and you should be ok. You may want to remove @@ -85,13 +85,13 @@ Installing the kernel source that there are no failed patches (some-file-name# or some-file-name.rej). If there are, either you or I have made a mistake. - Unlike patches for the 5.x kernels, patches for the 5.x.y kernels + Unlike patches for the 6.x kernels, patches for the 6.x.y kernels (also known as the -stable kernels) are not incremental but instead apply - directly to the base 5.x kernel. For example, if your base kernel is 5.0 - and you want to apply the 5.0.3 patch, you must not first apply the 5.0.1 - and 5.0.2 patches. Similarly, if you are running kernel version 5.0.2 and - want to jump to 5.0.3, you must first reverse the 5.0.2 patch (that is, - patch -R) **before** applying the 5.0.3 patch. You can read more on this in + directly to the base 6.x kernel. For example, if your base kernel is 6.0 + and you want to apply the 6.0.3 patch, you must not first apply the 6.0.1 + and 6.0.2 patches. Similarly, if you are running kernel version 6.0.2 and + want to jump to 6.0.3, you must first reverse the 6.0.2 patch (that is, + patch -R) **before** applying the 6.0.3 patch. You can read more on this in :ref:`Documentation/process/applying-patches.rst <applying_patches>`. Alternatively, the script patch-kernel can be used to automate this @@ -114,7 +114,7 @@ Installing the kernel source Software requirements --------------------- - Compiling and running the 5.x kernels requires up-to-date + Compiling and running the 6.x kernels requires up-to-date versions of various software packages. Consult :ref:`Documentation/process/changes.rst <changes>` for the minimum version numbers required and how to get updates for these packages. Beware that using @@ -132,12 +132,12 @@ Build directory for the kernel place for the output files (including .config). Example:: - kernel source code: /usr/src/linux-5.x + kernel source code: /usr/src/linux-6.x build directory: /home/name/build/kernel To configure and build the kernel, use:: - cd /usr/src/linux-5.x + cd /usr/src/linux-6.x make O=/home/name/build/kernel menuconfig make O=/home/name/build/kernel sudo make O=/home/name/build/kernel modules_install install @@ -262,8 +262,6 @@ Compiling the kernel - Make sure you have at least gcc 5.1 available. For more information, refer to :ref:`Documentation/process/changes.rst <changes>`. - Please note that you can still run a.out user programs with this kernel. - - Do a ``make`` to create a compressed kernel image. It is also possible to do ``make install`` if you have lilo installed to suit the kernel makefiles, but you may want to check your particular lilo setup first. @@ -332,85 +330,10 @@ Compiling the kernel If something goes wrong ----------------------- - - If you have problems that seem to be due to kernel bugs, please check - the file MAINTAINERS to see if there is a particular person associated - with the part of the kernel that you are having trouble with. If there - isn't anyone listed there, then the second best thing is to mail - them to me (torvalds@linux-foundation.org), and possibly to any other - relevant mailing-list or to the newsgroup. - - - In all bug-reports, *please* tell what kernel you are talking about, - how to duplicate the problem, and what your setup is (use your common - sense). If the problem is new, tell me so, and if the problem is - old, please try to tell me when you first noticed it. - - - If the bug results in a message like:: - - unable to handle kernel paging request at address C0000010 - Oops: 0002 - EIP: 0010:XXXXXXXX - eax: xxxxxxxx ebx: xxxxxxxx ecx: xxxxxxxx edx: xxxxxxxx - esi: xxxxxxxx edi: xxxxxxxx ebp: xxxxxxxx - ds: xxxx es: xxxx fs: xxxx gs: xxxx - Pid: xx, process nr: xx - xx xx xx xx xx xx xx xx xx xx - - or similar kernel debugging information on your screen or in your - system log, please duplicate it *exactly*. The dump may look - incomprehensible to you, but it does contain information that may - help debugging the problem. The text above the dump is also - important: it tells something about why the kernel dumped code (in - the above example, it's due to a bad kernel pointer). More information - on making sense of the dump is in Documentation/admin-guide/bug-hunting.rst - - - If you compiled the kernel with CONFIG_KALLSYMS you can send the dump - as is, otherwise you will have to use the ``ksymoops`` program to make - sense of the dump (but compiling with CONFIG_KALLSYMS is usually preferred). - This utility can be downloaded from - https://www.kernel.org/pub/linux/utils/kernel/ksymoops/ . - Alternatively, you can do the dump lookup by hand: - - - In debugging dumps like the above, it helps enormously if you can - look up what the EIP value means. The hex value as such doesn't help - me or anybody else very much: it will depend on your particular - kernel setup. What you should do is take the hex value from the EIP - line (ignore the ``0010:``), and look it up in the kernel namelist to - see which kernel function contains the offending address. - - To find out the kernel function name, you'll need to find the system - binary associated with the kernel that exhibited the symptom. This is - the file 'linux/vmlinux'. To extract the namelist and match it against - the EIP from the kernel crash, do:: - - nm vmlinux | sort | less - - This will give you a list of kernel addresses sorted in ascending - order, from which it is simple to find the function that contains the - offending address. Note that the address given by the kernel - debugging messages will not necessarily match exactly with the - function addresses (in fact, that is very unlikely), so you can't - just 'grep' the list: the list will, however, give you the starting - point of each kernel function, so by looking for the function that - has a starting address lower than the one you are searching for but - is followed by a function with a higher address you will find the one - you want. In fact, it may be a good idea to include a bit of - "context" in your problem report, giving a few lines around the - interesting one. - - If you for some reason cannot do the above (you have a pre-compiled - kernel image or similar), telling me as much about your setup as - possible will help. Please read - 'Documentation/admin-guide/reporting-issues.rst' for details. - - - Alternatively, you can use gdb on a running kernel. (read-only; i.e. you - cannot change values or set break points.) To do this, first compile the - kernel with -g; edit arch/x86/Makefile appropriately, then do a ``make - clean``. You'll also need to enable CONFIG_PROC_FS (via ``make config``). - - After you've rebooted with the new kernel, do ``gdb vmlinux /proc/kcore``. - You can now use all the usual gdb commands. The command to look up the - point where your system crashed is ``l *0xXXXXXXXX``. (Replace the XXXes - with the EIP value.) - - gdb'ing a non-running kernel currently fails because ``gdb`` (wrongly) - disregards the starting offset for which the kernel is compiled. +If you have problems that seem to be due to kernel bugs, please follow the +instructions at 'Documentation/admin-guide/reporting-issues.rst'. + +Hints on understanding kernel bug reports are in +'Documentation/admin-guide/bug-hunting.rst'. More on debugging the kernel +with gdb is in 'Documentation/dev-tools/gdb-kernel-debugging.rst' and +'Documentation/dev-tools/kgdb.rst'. diff --git a/Documentation/admin-guide/acpi/dsdt-override.rst b/Documentation/admin-guide/acpi/dsdt-override.rst deleted file mode 100644 index 50bd7f194bf4..000000000000 --- a/Documentation/admin-guide/acpi/dsdt-override.rst +++ /dev/null @@ -1,13 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -=============== -Overriding DSDT -=============== - -Linux supports a method of overriding the BIOS DSDT: - -CONFIG_ACPI_CUSTOM_DSDT - builds the image into the kernel. - -When to use this method is described in detail on the -Linux/ACPI home page: -https://01.org/linux-acpi/documentation/overriding-dsdt diff --git a/Documentation/admin-guide/hw-vuln/spectre.rst b/Documentation/admin-guide/hw-vuln/spectre.rst index 2ce2a38cdd55..c4dcdb3d0d45 100644 --- a/Documentation/admin-guide/hw-vuln/spectre.rst +++ b/Documentation/admin-guide/hw-vuln/spectre.rst @@ -613,6 +613,7 @@ kernel command line. eibrs enhanced IBRS eibrs,retpoline enhanced IBRS + Retpolines eibrs,lfence enhanced IBRS + LFENCE + ibrs use IBRS to protect kernel Not specifying this option is equivalent to spectre_v2=auto. diff --git a/Documentation/admin-guide/kdump/vmcoreinfo.rst b/Documentation/admin-guide/kdump/vmcoreinfo.rst index 8419019b6a88..6726f439958c 100644 --- a/Documentation/admin-guide/kdump/vmcoreinfo.rst +++ b/Documentation/admin-guide/kdump/vmcoreinfo.rst @@ -200,7 +200,7 @@ prb A pointer to the printk ringbuffer (struct printk_ringbuffer). This may be pointing to the static boot ringbuffer or the dynamically -allocated ringbuffer, depending on when the the core dump occurred. +allocated ringbuffer, depending on when the core dump occurred. Used by user-space tools to read the active kernel log buffer. printk_rb_static diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 426fa892d311..e92d63d3e878 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -966,10 +966,6 @@ debugpat [X86] Enable PAT debugging - decnet.addr= [HW,NET] - Format: <area>[,<node>] - See also Documentation/networking/decnet.rst. - default_hugepagesz= [HW] The size of the default HugeTLB page. This is the size represented by the legacy /proc/ hugepages @@ -3805,6 +3801,10 @@ nox2apic [X86-64,APIC] Do not enable x2APIC mode. + NOTE: this parameter will be ignored on systems with the + LEGACY_XAPIC_DISABLED bit set in the + IA32_XAPIC_DISABLE_STATUS MSR. + nps_mtm_hs_ctr= [KNL,ARC] This parameter sets the maximum duration, in cycles, each HW thread of the CTOP can run diff --git a/Documentation/admin-guide/mm/damon/usage.rst b/Documentation/admin-guide/mm/damon/usage.rst index d52f572a9029..ca91ecc29078 100644 --- a/Documentation/admin-guide/mm/damon/usage.rst +++ b/Documentation/admin-guide/mm/damon/usage.rst @@ -50,10 +50,10 @@ For a short example, users can monitor the virtual address space of a given workload as below. :: # cd /sys/kernel/mm/damon/admin/ - # echo 1 > kdamonds/nr && echo 1 > kdamonds/0/contexts/nr + # echo 1 > kdamonds/nr_kdamonds && echo 1 > kdamonds/0/contexts/nr_contexts # echo vaddr > kdamonds/0/contexts/0/operations - # echo 1 > kdamonds/0/contexts/0/targets/nr - # echo $(pidof <workload>) > kdamonds/0/contexts/0/targets/0/pid + # echo 1 > kdamonds/0/contexts/0/targets/nr_targets + # echo $(pidof <workload>) > kdamonds/0/contexts/0/targets/0/pid_target # echo on > kdamonds/0/state Files Hierarchy @@ -366,12 +366,12 @@ memory rate becomes larger than 60%, or lower than 30%". :: # echo 1 > kdamonds/0/contexts/0/schemes/nr_schemes # cd kdamonds/0/contexts/0/schemes/0 # # set the basic access pattern and the action - # echo 4096 > access_patterns/sz/min - # echo 8192 > access_patterns/sz/max - # echo 0 > access_patterns/nr_accesses/min - # echo 5 > access_patterns/nr_accesses/max - # echo 10 > access_patterns/age/min - # echo 20 > access_patterns/age/max + # echo 4096 > access_pattern/sz/min + # echo 8192 > access_pattern/sz/max + # echo 0 > access_pattern/nr_accesses/min + # echo 5 > access_pattern/nr_accesses/max + # echo 10 > access_pattern/age/min + # echo 20 > access_pattern/age/max # echo pageout > action # # set quotas # echo 10 > quotas/ms diff --git a/Documentation/admin-guide/mm/hugetlbpage.rst b/Documentation/admin-guide/mm/hugetlbpage.rst index 8e2727dc18d4..19f27c0d92e0 100644 --- a/Documentation/admin-guide/mm/hugetlbpage.rst +++ b/Documentation/admin-guide/mm/hugetlbpage.rst @@ -65,7 +65,7 @@ HugePages_Surp may be temporarily larger than the maximum number of surplus huge pages when the system is under memory pressure. Hugepagesize - is the default hugepage size (in Kb). + is the default hugepage size (in kB). Hugetlb is the total amount of memory (in kB), consumed by huge pages of all sizes. diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst index 60d44165fba7..6394f5dc2303 100644 --- a/Documentation/admin-guide/sysctl/net.rst +++ b/Documentation/admin-guide/sysctl/net.rst @@ -31,17 +31,18 @@ see only some of them, depending on your kernel's configuration. Table : Subdirectories in /proc/sys/net - ========= =================== = ========== ================== + ========= =================== = ========== =================== Directory Content Directory Content - ========= =================== = ========== ================== - core General parameter appletalk Appletalk protocol - unix Unix domain sockets netrom NET/ROM - 802 E802 protocol ax25 AX25 - ethernet Ethernet protocol rose X.25 PLP layer + ========= =================== = ========== =================== + 802 E802 protocol mptcp Multipath TCP + appletalk Appletalk protocol netfilter Network Filter + ax25 AX25 netrom NET/ROM + bridge Bridging rose X.25 PLP layer + core General parameter tipc TIPC + ethernet Ethernet protocol unix Unix domain sockets ipv4 IP version 4 x25 X.25 protocol - bridge Bridging decnet DEC net - ipv6 IP version 6 tipc TIPC - ========= =================== = ========== ================== + ipv6 IP version 6 + ========= =================== = ========== =================== 1. /proc/sys/net/core - Network core options ============================================ @@ -101,6 +102,9 @@ Values: - 1 - enable JIT hardening for unprivileged users only - 2 - enable JIT hardening for all users +where "privileged user" in this context means a process having +CAP_BPF or CAP_SYS_ADMIN in the root user name space. + bpf_jit_kallsyms ---------------- diff --git a/Documentation/admin-guide/tainted-kernels.rst b/Documentation/admin-guide/tainted-kernels.rst index 7d80e8c307d1..92a8a07f5c43 100644 --- a/Documentation/admin-guide/tainted-kernels.rst +++ b/Documentation/admin-guide/tainted-kernels.rst @@ -134,6 +134,12 @@ More detailed explanation for tainting scsi/snic on something else than x86_64, scsi/ips on non x86/x86_64/itanium, have broken firmware settings for the irqchip/irq-gic on arm64 ...). + - x86/x86_64: Microcode late loading is dangerous and will result in + tainting the kernel. It requires that all CPUs rendezvous to make sure + the update happens when the system is as quiescent as possible. However, + a higher priority MCE/SMI/NMI can move control flow away from that + rendezvous and interrupt the update, which can be detrimental to the + machine. 3) ``R`` if a module was force unloaded by ``rmmod -f``, ``' '`` if all modules were unloaded normally. diff --git a/Documentation/block/index.rst b/Documentation/block/index.rst index 68f115f2b1c6..c4c73db748a8 100644 --- a/Documentation/block/index.rst +++ b/Documentation/block/index.rst @@ -23,3 +23,4 @@ Block stat switching-sched writeback_cache_control + ublk diff --git a/Documentation/block/ublk.rst b/Documentation/block/ublk.rst new file mode 100644 index 000000000000..2122d1a4a541 --- /dev/null +++ b/Documentation/block/ublk.rst @@ -0,0 +1,253 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========================================== +Userspace block device driver (ublk driver) +=========================================== + +Overview +======== + +ublk is a generic framework for implementing block device logic from userspace. +The motivation behind it is that moving virtual block drivers into userspace, +such as loop, nbd and similar can be very helpful. It can help to implement +new virtual block device such as ublk-qcow2 (there are several attempts of +implementing qcow2 driver in kernel). + +Userspace block devices are attractive because: + +- They can be written many programming languages. +- They can use libraries that are not available in the kernel. +- They can be debugged with tools familiar to application developers. +- Crashes do not kernel panic the machine. +- Bugs are likely to have a lower security impact than bugs in kernel + code. +- They can be installed and updated independently of the kernel. +- They can be used to simulate block device easily with user specified + parameters/setting for test/debug purpose + +ublk block device (``/dev/ublkb*``) is added by ublk driver. Any IO request +on the device will be forwarded to ublk userspace program. For convenience, +in this document, ``ublk server`` refers to generic ublk userspace +program. ``ublksrv`` [#userspace]_ is one of such implementation. It +provides ``libublksrv`` [#userspace_lib]_ library for developing specific +user block device conveniently, while also generic type block device is +included, such as loop and null. Richard W.M. Jones wrote userspace nbd device +``nbdublk`` [#userspace_nbdublk]_ based on ``libublksrv`` [#userspace_lib]_. + +After the IO is handled by userspace, the result is committed back to the +driver, thus completing the request cycle. This way, any specific IO handling +logic is totally done by userspace, such as loop's IO handling, NBD's IO +communication, or qcow2's IO mapping. + +``/dev/ublkb*`` is driven by blk-mq request-based driver. Each request is +assigned by one queue wide unique tag. ublk server assigns unique tag to each +IO too, which is 1:1 mapped with IO of ``/dev/ublkb*``. + +Both the IO request forward and IO handling result committing are done via +``io_uring`` passthrough command; that is why ublk is also one io_uring based +block driver. It has been observed that using io_uring passthrough command can +give better IOPS than block IO; which is why ublk is one of high performance +implementation of userspace block device: not only IO request communication is +done by io_uring, but also the preferred IO handling in ublk server is io_uring +based approach too. + +ublk provides control interface to set/get ublk block device parameters. +The interface is extendable and kabi compatible: basically any ublk request +queue's parameter or ublk generic feature parameters can be set/get via the +interface. Thus, ublk is generic userspace block device framework. +For example, it is easy to setup a ublk device with specified block +parameters from userspace. + +Using ublk +========== + +ublk requires userspace ublk server to handle real block device logic. + +Below is example of using ``ublksrv`` to provide ublk-based loop device. + +- add a device:: + + ublk add -t loop -f ublk-loop.img + +- format with xfs, then use it:: + + mkfs.xfs /dev/ublkb0 + mount /dev/ublkb0 /mnt + # do anything. all IOs are handled by io_uring + ... + umount /mnt + +- list the devices with their info:: + + ublk list + +- delete the device:: + + ublk del -a + ublk del -n $ublk_dev_id + +See usage details in README of ``ublksrv`` [#userspace_readme]_. + +Design +====== + +Control plane +------------- + +ublk driver provides global misc device node (``/dev/ublk-control``) for +managing and controlling ublk devices with help of several control commands: + +- ``UBLK_CMD_ADD_DEV`` + + Add a ublk char device (``/dev/ublkc*``) which is talked with ublk server + WRT IO command communication. Basic device info is sent together with this + command. It sets UAPI structure of ``ublksrv_ctrl_dev_info``, + such as ``nr_hw_queues``, ``queue_depth``, and max IO request buffer size, + for which the info is negotiated with the driver and sent back to the server. + When this command is completed, the basic device info is immutable. + +- ``UBLK_CMD_SET_PARAMS`` / ``UBLK_CMD_GET_PARAMS`` + + Set or get parameters of the device, which can be either generic feature + related, or request queue limit related, but can't be IO logic specific, + because the driver does not handle any IO logic. This command has to be + sent before sending ``UBLK_CMD_START_DEV``. + +- ``UBLK_CMD_START_DEV`` + + After the server prepares userspace resources (such as creating per-queue + pthread & io_uring for handling ublk IO), this command is sent to the + driver for allocating & exposing ``/dev/ublkb*``. Parameters set via + ``UBLK_CMD_SET_PARAMS`` are applied for creating the device. + +- ``UBLK_CMD_STOP_DEV`` + + Halt IO on ``/dev/ublkb*`` and remove the device. When this command returns, + ublk server will release resources (such as destroying per-queue pthread & + io_uring). + +- ``UBLK_CMD_DEL_DEV`` + + Remove ``/dev/ublkc*``. When this command returns, the allocated ublk device + number can be reused. + +- ``UBLK_CMD_GET_QUEUE_AFFINITY`` + + When ``/dev/ublkc`` is added, the driver creates block layer tagset, so + that each queue's affinity info is available. The server sends + ``UBLK_CMD_GET_QUEUE_AFFINITY`` to retrieve queue affinity info. It can + set up the per-queue context efficiently, such as bind affine CPUs with IO + pthread and try to allocate buffers in IO thread context. + +- ``UBLK_CMD_GET_DEV_INFO`` + + For retrieving device info via ``ublksrv_ctrl_dev_info``. It is the server's + responsibility to save IO target specific info in userspace. + +Data plane +---------- + +ublk server needs to create per-queue IO pthread & io_uring for handling IO +commands via io_uring passthrough. The per-queue IO pthread +focuses on IO handling and shouldn't handle any control & management +tasks. + +The's IO is assigned by a unique tag, which is 1:1 mapping with IO +request of ``/dev/ublkb*``. + +UAPI structure of ``ublksrv_io_desc`` is defined for describing each IO from +the driver. A fixed mmaped area (array) on ``/dev/ublkc*`` is provided for +exporting IO info to the server; such as IO offset, length, OP/flags and +buffer address. Each ``ublksrv_io_desc`` instance can be indexed via queue id +and IO tag directly. + +The following IO commands are communicated via io_uring passthrough command, +and each command is only for forwarding the IO and committing the result +with specified IO tag in the command data: + +- ``UBLK_IO_FETCH_REQ`` + + Sent from the server IO pthread for fetching future incoming IO requests + destined to ``/dev/ublkb*``. This command is sent only once from the server + IO pthread for ublk driver to setup IO forward environment. + +- ``UBLK_IO_COMMIT_AND_FETCH_REQ`` + + When an IO request is destined to ``/dev/ublkb*``, the driver stores + the IO's ``ublksrv_io_desc`` to the specified mapped area; then the + previous received IO command of this IO tag (either ``UBLK_IO_FETCH_REQ`` + or ``UBLK_IO_COMMIT_AND_FETCH_REQ)`` is completed, so the server gets + the IO notification via io_uring. + + After the server handles the IO, its result is committed back to the + driver by sending ``UBLK_IO_COMMIT_AND_FETCH_REQ`` back. Once ublkdrv + received this command, it parses the result and complete the request to + ``/dev/ublkb*``. In the meantime setup environment for fetching future + requests with the same IO tag. That is, ``UBLK_IO_COMMIT_AND_FETCH_REQ`` + is reused for both fetching request and committing back IO result. + +- ``UBLK_IO_NEED_GET_DATA`` + + With ``UBLK_F_NEED_GET_DATA`` enabled, the WRITE request will be firstly + issued to ublk server without data copy. Then, IO backend of ublk server + receives the request and it can allocate data buffer and embed its addr + inside this new io command. After the kernel driver gets the command, + data copy is done from request pages to this backend's buffer. Finally, + backend receives the request again with data to be written and it can + truly handle the request. + + ``UBLK_IO_NEED_GET_DATA`` adds one additional round-trip and one + io_uring_enter() syscall. Any user thinks that it may lower performance + should not enable UBLK_F_NEED_GET_DATA. ublk server pre-allocates IO + buffer for each IO by default. Any new project should try to use this + buffer to communicate with ublk driver. However, existing project may + break or not able to consume the new buffer interface; that's why this + command is added for backwards compatibility so that existing projects + can still consume existing buffers. + +- data copy between ublk server IO buffer and ublk block IO request + + The driver needs to copy the block IO request pages into the server buffer + (pages) first for WRITE before notifying the server of the coming IO, so + that the server can handle WRITE request. + + When the server handles READ request and sends + ``UBLK_IO_COMMIT_AND_FETCH_REQ`` to the server, ublkdrv needs to copy + the server buffer (pages) read to the IO request pages. + +Future development +================== + +Container-aware ublk deivice +---------------------------- + +ublk driver doesn't handle any IO logic. Its function is well defined +for now and very limited userspace interfaces are needed, which is also +well defined too. It is possible to make ublk devices container-aware block +devices in future as Stefan Hajnoczi suggested [#stefan]_, by removing +ADMIN privilege. + +Zero copy +--------- + +Zero copy is a generic requirement for nbd, fuse or similar drivers. A +problem [#xiaoguang]_ Xiaoguang mentioned is that pages mapped to userspace +can't be remapped any more in kernel with existing mm interfaces. This can +occurs when destining direct IO to ``/dev/ublkb*``. Also, he reported that +big requests (IO size >= 256 KB) may benefit a lot from zero copy. + + +References +========== + +.. [#userspace] https://github.com/ming1/ubdsrv + +.. [#userspace_lib] https://github.com/ming1/ubdsrv/tree/master/lib + +.. [#userspace_nbdublk] https://gitlab.com/rwmjones/libnbd/-/tree/nbdublk + +.. [#userspace_readme] https://github.com/ming1/ubdsrv/blob/master/README + +.. [#stefan] https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ + +.. [#xiaoguang] https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ diff --git a/Documentation/bpf/clang-notes.rst b/Documentation/bpf/clang-notes.rst new file mode 100644 index 000000000000..528feddf2db9 --- /dev/null +++ b/Documentation/bpf/clang-notes.rst @@ -0,0 +1,30 @@ +.. contents:: +.. sectnum:: + +========================== +Clang implementation notes +========================== + +This document provides more details specific to the Clang/LLVM implementation of the eBPF instruction set. + +Versions +======== + +Clang defined "CPU" versions, where a CPU version of 3 corresponds to the current eBPF ISA. + +Clang can select the eBPF ISA version using ``-mcpu=v3`` for example to select version 3. + +Arithmetic instructions +======================= + +For CPU versions prior to 3, Clang v7.0 and later can enable ``BPF_ALU`` support with +``-Xclang -target-feature -Xclang +alu32``. In CPU version 3, support is automatically included. + +Atomic operations +================= + +Clang can generate atomic instructions by default when ``-mcpu=v3`` is +enabled. If a lower version for ``-mcpu`` is set, the only atomic instruction +Clang can generate is ``BPF_ADD`` *without* ``BPF_FETCH``. If you need to enable +the atomics features, while keeping a lower ``-mcpu`` version, you can use +``-Xclang -target-feature -Xclang +alu32``. diff --git a/Documentation/bpf/index.rst b/Documentation/bpf/index.rst index 1bc2c5c58bdb..1b50de1983ee 100644 --- a/Documentation/bpf/index.rst +++ b/Documentation/bpf/index.rst @@ -26,6 +26,8 @@ that goes into great technical depth about the BPF Architecture. classic_vs_extended.rst bpf_licensing test_debug + clang-notes + linux-notes other .. only:: subproject and html diff --git a/Documentation/bpf/instruction-set.rst b/Documentation/bpf/instruction-set.rst index 1b0e6711dec9..5d798437dad4 100644 --- a/Documentation/bpf/instruction-set.rst +++ b/Documentation/bpf/instruction-set.rst @@ -1,7 +1,12 @@ +.. contents:: +.. sectnum:: + +======================================== +eBPF Instruction Set Specification, v1.0 +======================================== + +This document specifies version 1.0 of the eBPF instruction set. -==================== -eBPF Instruction Set -==================== Registers and calling convention ================================ @@ -11,10 +16,10 @@ all of which are 64-bits wide. The eBPF calling convention is defined as: - * R0: return value from function calls, and exit value for eBPF programs - * R1 - R5: arguments for function calls - * R6 - R9: callee saved registers that function calls will preserve - * R10: read-only frame pointer to access stack +* R0: return value from function calls, and exit value for eBPF programs +* R1 - R5: arguments for function calls +* R6 - R9: callee saved registers that function calls will preserve +* R10: read-only frame pointer to access stack R0 - R5 are scratch registers and eBPF programs needs to spill/fill them if necessary across calls. @@ -24,17 +29,17 @@ Instruction encoding eBPF has two instruction encodings: - * the basic instruction encoding, which uses 64 bits to encode an instruction - * the wide instruction encoding, which appends a second 64-bit immediate value - (imm64) after the basic instruction for a total of 128 bits. +* the basic instruction encoding, which uses 64 bits to encode an instruction +* the wide instruction encoding, which appends a second 64-bit immediate value + (imm64) after the basic instruction for a total of 128 bits. The basic instruction encoding looks as follows: - ============= ======= =============== ==================== ============ - 32 bits (MSB) 16 bits 4 bits 4 bits 8 bits (LSB) - ============= ======= =============== ==================== ============ - immediate offset source register destination register opcode - ============= ======= =============== ==================== ============ +============= ======= =============== ==================== ============ +32 bits (MSB) 16 bits 4 bits 4 bits 8 bits (LSB) +============= ======= =============== ==================== ============ +immediate offset source register destination register opcode +============= ======= =============== ==================== ============ Note that most instructions do not use all of the fields. Unused fields shall be cleared to zero. @@ -44,30 +49,30 @@ Instruction classes The three LSB bits of the 'opcode' field store the instruction class: - ========= ===== =============================== - class value description - ========= ===== =============================== - BPF_LD 0x00 non-standard load operations - BPF_LDX 0x01 load into register operations - BPF_ST 0x02 store from immediate operations - BPF_STX 0x03 store from register operations - BPF_ALU 0x04 32-bit arithmetic operations - BPF_JMP 0x05 64-bit jump operations - BPF_JMP32 0x06 32-bit jump operations - BPF_ALU64 0x07 64-bit arithmetic operations - ========= ===== =============================== +========= ===== =============================== =================================== +class value description reference +========= ===== =============================== =================================== +BPF_LD 0x00 non-standard load operations `Load and store instructions`_ +BPF_LDX 0x01 load into register operations `Load and store instructions`_ +BPF_ST 0x02 store from immediate operations `Load and store instructions`_ +BPF_STX 0x03 store from register operations `Load and store instructions`_ +BPF_ALU 0x04 32-bit arithmetic operations `Arithmetic and jump instructions`_ +BPF_JMP 0x05 64-bit jump operations `Arithmetic and jump instructions`_ +BPF_JMP32 0x06 32-bit jump operations `Arithmetic and jump instructions`_ +BPF_ALU64 0x07 64-bit arithmetic operations `Arithmetic and jump instructions`_ +========= ===== =============================== =================================== Arithmetic and jump instructions ================================ -For arithmetic and jump instructions (BPF_ALU, BPF_ALU64, BPF_JMP and -BPF_JMP32), the 8-bit 'opcode' field is divided into three parts: +For arithmetic and jump instructions (``BPF_ALU``, ``BPF_ALU64``, ``BPF_JMP`` and +``BPF_JMP32``), the 8-bit 'opcode' field is divided into three parts: - ============== ====== ================= - 4 bits (MSB) 1 bit 3 bits (LSB) - ============== ====== ================= - operation code source instruction class - ============== ====== ================= +============== ====== ================= +4 bits (MSB) 1 bit 3 bits (LSB) +============== ====== ================= +operation code source instruction class +============== ====== ================= The 4th bit encodes the source operand: @@ -84,66 +89,66 @@ The four MSB bits store the operation code. Arithmetic instructions ----------------------- -BPF_ALU uses 32-bit wide operands while BPF_ALU64 uses 64-bit wide operands for +``BPF_ALU`` uses 32-bit wide operands while ``BPF_ALU64`` uses 64-bit wide operands for otherwise identical operations. -The code field encodes the operation as below: - - ======== ===== ================================================= - code value description - ======== ===== ================================================= - BPF_ADD 0x00 dst += src - BPF_SUB 0x10 dst -= src - BPF_MUL 0x20 dst \*= src - BPF_DIV 0x30 dst /= src - BPF_OR 0x40 dst \|= src - BPF_AND 0x50 dst &= src - BPF_LSH 0x60 dst <<= src - BPF_RSH 0x70 dst >>= src - BPF_NEG 0x80 dst = ~src - BPF_MOD 0x90 dst %= src - BPF_XOR 0xa0 dst ^= src - BPF_MOV 0xb0 dst = src - BPF_ARSH 0xc0 sign extending shift right - BPF_END 0xd0 byte swap operations (see separate section below) - ======== ===== ================================================= - -BPF_ADD | BPF_X | BPF_ALU means:: +The 'code' field encodes the operation as below: + +======== ===== ========================================================== +code value description +======== ===== ========================================================== +BPF_ADD 0x00 dst += src +BPF_SUB 0x10 dst -= src +BPF_MUL 0x20 dst \*= src +BPF_DIV 0x30 dst /= src +BPF_OR 0x40 dst \|= src +BPF_AND 0x50 dst &= src +BPF_LSH 0x60 dst <<= src +BPF_RSH 0x70 dst >>= src +BPF_NEG 0x80 dst = ~src +BPF_MOD 0x90 dst %= src +BPF_XOR 0xa0 dst ^= src +BPF_MOV 0xb0 dst = src +BPF_ARSH 0xc0 sign extending shift right +BPF_END 0xd0 byte swap operations (see `Byte swap instructions`_ below) +======== ===== ========================================================== + +``BPF_ADD | BPF_X | BPF_ALU`` means:: dst_reg = (u32) dst_reg + (u32) src_reg; -BPF_ADD | BPF_X | BPF_ALU64 means:: +``BPF_ADD | BPF_X | BPF_ALU64`` means:: dst_reg = dst_reg + src_reg -BPF_XOR | BPF_K | BPF_ALU means:: +``BPF_XOR | BPF_K | BPF_ALU`` means:: src_reg = (u32) src_reg ^ (u32) imm32 -BPF_XOR | BPF_K | BPF_ALU64 means:: +``BPF_XOR | BPF_K | BPF_ALU64`` means:: src_reg = src_reg ^ imm32 Byte swap instructions ----------------------- +~~~~~~~~~~~~~~~~~~~~~~ The byte swap instructions use an instruction class of ``BPF_ALU`` and a 4-bit -code field of ``BPF_END``. +'code' field of ``BPF_END``. The byte swap instructions operate on the destination register only and do not use a separate source register or immediate value. -The 1-bit source operand field in the opcode is used to to select what byte +The 1-bit source operand field in the opcode is used to select what byte order the operation convert from or to: - ========= ===== ================================================= - source value description - ========= ===== ================================================= - BPF_TO_LE 0x00 convert between host byte order and little endian - BPF_TO_BE 0x08 convert between host byte order and big endian - ========= ===== ================================================= +========= ===== ================================================= +source value description +========= ===== ================================================= +BPF_TO_LE 0x00 convert between host byte order and little endian +BPF_TO_BE 0x08 convert between host byte order and big endian +========= ===== ================================================= -The imm field encodes the width of the swap operations. The following widths +The 'imm' field encodes the width of the swap operations. The following widths are supported: 16, 32 and 64. Examples: @@ -156,35 +161,31 @@ Examples: dst_reg = htobe64(dst_reg) -``BPF_FROM_LE`` and ``BPF_FROM_BE`` exist as aliases for ``BPF_TO_LE`` and -``BPF_TO_BE`` respectively. - - Jump instructions ----------------- -BPF_JMP32 uses 32-bit wide operands while BPF_JMP uses 64-bit wide operands for +``BPF_JMP32`` uses 32-bit wide operands while ``BPF_JMP`` uses 64-bit wide operands for otherwise identical operations. -The code field encodes the operation as below: - - ======== ===== ========================= ============ - code value description notes - ======== ===== ========================= ============ - BPF_JA 0x00 PC += off BPF_JMP only - BPF_JEQ 0x10 PC += off if dst == src - BPF_JGT 0x20 PC += off if dst > src unsigned - BPF_JGE 0x30 PC += off if dst >= src unsigned - BPF_JSET 0x40 PC += off if dst & src - BPF_JNE 0x50 PC += off if dst != src - BPF_JSGT 0x60 PC += off if dst > src signed - BPF_JSGE 0x70 PC += off if dst >= src signed - BPF_CALL 0x80 function call - BPF_EXIT 0x90 function / program return BPF_JMP only - BPF_JLT 0xa0 PC += off if dst < src unsigned - BPF_JLE 0xb0 PC += off if dst <= src unsigned - BPF_JSLT 0xc0 PC += off if dst < src signed - BPF_JSLE 0xd0 PC += off if dst <= src signed - ======== ===== ========================= ============ +The 'code' field encodes the operation as below: + +======== ===== ========================= ============ +code value description notes +======== ===== ========================= ============ +BPF_JA 0x00 PC += off BPF_JMP only +BPF_JEQ 0x10 PC += off if dst == src +BPF_JGT 0x20 PC += off if dst > src unsigned +BPF_JGE 0x30 PC += off if dst >= src unsigned +BPF_JSET 0x40 PC += off if dst & src +BPF_JNE 0x50 PC += off if dst != src +BPF_JSGT 0x60 PC += off if dst > src signed +BPF_JSGE 0x70 PC += off if dst >= src signed +BPF_CALL 0x80 function call +BPF_EXIT 0x90 function / program return BPF_JMP only +BPF_JLT 0xa0 PC += off if dst < src unsigned +BPF_JLE 0xb0 PC += off if dst <= src unsigned +BPF_JSLT 0xc0 PC += off if dst < src signed +BPF_JSLE 0xd0 PC += off if dst <= src signed +======== ===== ========================= ============ The eBPF program needs to store the return value into register R0 before doing a BPF_EXIT. @@ -193,14 +194,26 @@ BPF_EXIT. Load and store instructions =========================== -For load and store instructions (BPF_LD, BPF_LDX, BPF_ST and BPF_STX), the +For load and store instructions (``BPF_LD``, ``BPF_LDX``, ``BPF_ST``, and ``BPF_STX``), the 8-bit 'opcode' field is divided as: - ============ ====== ================= - 3 bits (MSB) 2 bits 3 bits (LSB) - ============ ====== ================= - mode size instruction class - ============ ====== ================= +============ ====== ================= +3 bits (MSB) 2 bits 3 bits (LSB) +============ ====== ================= +mode size instruction class +============ ====== ================= + +The mode modifier is one of: + + ============= ===== ==================================== ============= + mode modifier value description reference + ============= ===== ==================================== ============= + BPF_IMM 0x00 64-bit immediate instructions `64-bit immediate instructions`_ + BPF_ABS 0x20 legacy BPF packet access (absolute) `Legacy BPF Packet access instructions`_ + BPF_IND 0x40 legacy BPF packet access (indirect) `Legacy BPF Packet access instructions`_ + BPF_MEM 0x60 regular load and store operations `Regular load and store operations`_ + BPF_ATOMIC 0xc0 atomic operations `Atomic operations`_ + ============= ===== ==================================== ============= The size modifier is one of: @@ -213,19 +226,6 @@ The size modifier is one of: BPF_DW 0x18 double word (8 bytes) ============= ===== ===================== -The mode modifier is one of: - - ============= ===== ==================================== - mode modifier value description - ============= ===== ==================================== - BPF_IMM 0x00 64-bit immediate instructions - BPF_ABS 0x20 legacy BPF packet access (absolute) - BPF_IND 0x40 legacy BPF packet access (indirect) - BPF_MEM 0x60 regular load and store operations - BPF_ATOMIC 0xc0 atomic operations - ============= ===== ==================================== - - Regular load and store operations --------------------------------- @@ -256,44 +256,42 @@ by other eBPF programs or means outside of this specification. All atomic operations supported by eBPF are encoded as store operations that use the ``BPF_ATOMIC`` mode modifier as follows: - * ``BPF_ATOMIC | BPF_W | BPF_STX`` for 32-bit operations - * ``BPF_ATOMIC | BPF_DW | BPF_STX`` for 64-bit operations - * 8-bit and 16-bit wide atomic operations are not supported. +* ``BPF_ATOMIC | BPF_W | BPF_STX`` for 32-bit operations +* ``BPF_ATOMIC | BPF_DW | BPF_STX`` for 64-bit operations +* 8-bit and 16-bit wide atomic operations are not supported. -The imm field is used to encode the actual atomic operation. +The 'imm' field is used to encode the actual atomic operation. Simple atomic operation use a subset of the values defined to encode -arithmetic operations in the imm field to encode the atomic operation: +arithmetic operations in the 'imm' field to encode the atomic operation: - ======== ===== =========== - imm value description - ======== ===== =========== - BPF_ADD 0x00 atomic add - BPF_OR 0x40 atomic or - BPF_AND 0x50 atomic and - BPF_XOR 0xa0 atomic xor - ======== ===== =========== +======== ===== =========== +imm value description +======== ===== =========== +BPF_ADD 0x00 atomic add +BPF_OR 0x40 atomic or +BPF_AND 0x50 atomic and +BPF_XOR 0xa0 atomic xor +======== ===== =========== -``BPF_ATOMIC | BPF_W | BPF_STX`` with imm = BPF_ADD means:: +``BPF_ATOMIC | BPF_W | BPF_STX`` with 'imm' = BPF_ADD means:: *(u32 *)(dst_reg + off16) += src_reg -``BPF_ATOMIC | BPF_DW | BPF_STX`` with imm = BPF ADD means:: +``BPF_ATOMIC | BPF_DW | BPF_STX`` with 'imm' = BPF ADD means:: *(u64 *)(dst_reg + off16) += src_reg -``BPF_XADD`` is a deprecated name for ``BPF_ATOMIC | BPF_ADD``. - In addition to the simple atomic operations, there also is a modifier and two complex atomic operations: - =========== ================ =========================== - imm value description - =========== ================ =========================== - BPF_FETCH 0x01 modifier: return old value - BPF_XCHG 0xe0 | BPF_FETCH atomic exchange - BPF_CMPXCHG 0xf0 | BPF_FETCH atomic compare and exchange - =========== ================ =========================== +=========== ================ =========================== +imm value description +=========== ================ =========================== +BPF_FETCH 0x01 modifier: return old value +BPF_XCHG 0xe0 | BPF_FETCH atomic exchange +BPF_CMPXCHG 0xf0 | BPF_FETCH atomic compare and exchange +=========== ================ =========================== The ``BPF_FETCH`` modifier is optional for simple atomic operations, and always set for the complex atomic operations. If the ``BPF_FETCH`` flag @@ -309,16 +307,10 @@ The ``BPF_CMPXCHG`` operation atomically compares the value addressed by value that was at ``dst_reg + off`` before the operation is zero-extended and loaded back to ``R0``. -Clang can generate atomic instructions by default when ``-mcpu=v3`` is -enabled. If a lower version for ``-mcpu`` is set, the only atomic instruction -Clang can generate is ``BPF_ADD`` *without* ``BPF_FETCH``. If you need to enable -the atomics features, while keeping a lower ``-mcpu`` version, you can use -``-Xclang -target-feature -Xclang +alu32``. - 64-bit immediate instructions ----------------------------- -Instructions with the ``BPF_IMM`` mode modifier use the wide instruction +Instructions with the ``BPF_IMM`` 'mode' modifier use the wide instruction encoding for an extra imm64 value. There is currently only one such instruction. @@ -331,36 +323,6 @@ There is currently only one such instruction. Legacy BPF Packet access instructions ------------------------------------- -eBPF has special instructions for access to packet data that have been -carried over from classic BPF to retain the performance of legacy socket -filters running in the eBPF interpreter. - -The instructions come in two forms: ``BPF_ABS | <size> | BPF_LD`` and -``BPF_IND | <size> | BPF_LD``. - -These instructions are used to access packet data and can only be used when -the program context is a pointer to networking packet. ``BPF_ABS`` -accesses packet data at an absolute offset specified by the immediate data -and ``BPF_IND`` access packet data at an offset that includes the value of -a register in addition to the immediate data. - -These instructions have seven implicit operands: - - * Register R6 is an implicit input that must contain pointer to a - struct sk_buff. - * Register R0 is an implicit output which contains the data fetched from - the packet. - * Registers R1-R5 are scratch registers that are clobbered after a call to - ``BPF_ABS | BPF_LD`` or ``BPF_IND | BPF_LD`` instructions. - -These instructions have an implicit program exit condition as well. When an -eBPF program is trying to access the data beyond the packet boundary, the -program execution will be aborted. - -``BPF_ABS | BPF_W | BPF_LD`` means:: - - R0 = ntohl(*(u32 *) (((struct sk_buff *) R6)->data + imm32)) - -``BPF_IND | BPF_W | BPF_LD`` means:: - - R0 = ntohl(*(u32 *) (((struct sk_buff *) R6)->data + src_reg + imm32)) +eBPF previously introduced special instructions for access to packet data that were +carried over from classic BPF. However, these instructions are +deprecated and should no longer be used. diff --git a/Documentation/bpf/kfuncs.rst b/Documentation/bpf/kfuncs.rst index c0b7dae6dbf5..0f858156371d 100644 --- a/Documentation/bpf/kfuncs.rst +++ b/Documentation/bpf/kfuncs.rst @@ -137,14 +137,37 @@ KF_ACQUIRE and KF_RET_NULL flags. -------------------------- The KF_TRUSTED_ARGS flag is used for kfuncs taking pointer arguments. It -indicates that the all pointer arguments will always be refcounted, and have -their offset set to 0. It can be used to enforce that a pointer to a refcounted -object acquired from a kfunc or BPF helper is passed as an argument to this -kfunc without any modifications (e.g. pointer arithmetic) such that it is -trusted and points to the original object. This flag is often used for kfuncs -that operate (change some property, perform some operation) on an object that -was obtained using an acquire kfunc. Such kfuncs need an unchanged pointer to -ensure the integrity of the operation being performed on the expected object. +indicates that the all pointer arguments will always have a guaranteed lifetime, +and pointers to kernel objects are always passed to helpers in their unmodified +form (as obtained from acquire kfuncs). + +It can be used to enforce that a pointer to a refcounted object acquired from a +kfunc or BPF helper is passed as an argument to this kfunc without any +modifications (e.g. pointer arithmetic) such that it is trusted and points to +the original object. + +Meanwhile, it is also allowed pass pointers to normal memory to such kfuncs, +but those can have a non-zero offset. + +This flag is often used for kfuncs that operate (change some property, perform +some operation) on an object that was obtained using an acquire kfunc. Such +kfuncs need an unchanged pointer to ensure the integrity of the operation being +performed on the expected object. + +2.4.6 KF_SLEEPABLE flag +----------------------- + +The KF_SLEEPABLE flag is used for kfuncs that may sleep. Such kfuncs can only +be called by sleepable BPF programs (BPF_F_SLEEPABLE). + +2.4.7 KF_DESTRUCTIVE flag +-------------------------- + +The KF_DESTRUCTIVE flag is used to indicate functions calling which is +destructive to the system. For example such a call can result in system +rebooting or panicking. Due to this additional restrictions apply to these +calls. At the moment they only require CAP_SYS_BOOT capability, but more can be +added later. 2.5 Registering the kfuncs -------------------------- diff --git a/Documentation/bpf/linux-notes.rst b/Documentation/bpf/linux-notes.rst new file mode 100644 index 000000000000..956b0c86699d --- /dev/null +++ b/Documentation/bpf/linux-notes.rst @@ -0,0 +1,53 @@ +.. contents:: +.. sectnum:: + +========================== +Linux implementation notes +========================== + +This document provides more details specific to the Linux kernel implementation of the eBPF instruction set. + +Byte swap instructions +====================== + +``BPF_FROM_LE`` and ``BPF_FROM_BE`` exist as aliases for ``BPF_TO_LE`` and ``BPF_TO_BE`` respectively. + +Legacy BPF Packet access instructions +===================================== + +As mentioned in the `ISA standard documentation <instruction-set.rst#legacy-bpf-packet-access-instructions>`_, +Linux has special eBPF instructions for access to packet data that have been +carried over from classic BPF to retain the performance of legacy socket +filters running in the eBPF interpreter. + +The instructions come in two forms: ``BPF_ABS | <size> | BPF_LD`` and +``BPF_IND | <size> | BPF_LD``. + +These instructions are used to access packet data and can only be used when +the program context is a pointer to a networking packet. ``BPF_ABS`` +accesses packet data at an absolute offset specified by the immediate data +and ``BPF_IND`` access packet data at an offset that includes the value of +a register in addition to the immediate data. + +These instructions have seven implicit operands: + +* Register R6 is an implicit input that must contain a pointer to a + struct sk_buff. +* Register R0 is an implicit output which contains the data fetched from + the packet. +* Registers R1-R5 are scratch registers that are clobbered by the + instruction. + +These instructions have an implicit program exit condition as well. If an +eBPF program attempts access data beyond the packet boundary, the +program execution will be aborted. + +``BPF_ABS | BPF_W | BPF_LD`` (0x20) means:: + + R0 = ntohl(*(u32 *) ((struct sk_buff *) R6->data + imm)) + +where ``ntohl()`` converts a 32-bit value from network byte order to host byte order. + +``BPF_IND | BPF_W | BPF_LD`` (0x40) means:: + + R0 = ntohl(*(u32 *) ((struct sk_buff *) R6->data + src + imm)) diff --git a/Documentation/bpf/map_cgroup_storage.rst b/Documentation/bpf/map_cgroup_storage.rst index cab9543017bf..8e5fe532c07e 100644 --- a/Documentation/bpf/map_cgroup_storage.rst +++ b/Documentation/bpf/map_cgroup_storage.rst @@ -31,7 +31,7 @@ The map uses key of type of either ``__u64 cgroup_inode_id`` or }; ``cgroup_inode_id`` is the inode id of the cgroup directory. -``attach_type`` is the the program's attach type. +``attach_type`` is the program's attach type. Linux 5.9 added support for type ``__u64 cgroup_inode_id`` as the key type. When this key type is used, then all attach types of the particular cgroup and @@ -155,7 +155,7 @@ However, the BPF program can still only associate with one map of each type ``BPF_MAP_TYPE_CGROUP_STORAGE`` or more than one ``BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE``. -In all versions, userspace may use the the attach parameters of cgroup and +In all versions, userspace may use the attach parameters of cgroup and attach type pair in ``struct bpf_cgroup_storage_key`` as the key to the BPF map APIs to read or update the storage for a given attachment. For Linux 5.9 attach type shared storages, only the first value in the struct, cgroup inode diff --git a/Documentation/conf.py b/Documentation/conf.py index 934727e23e0e..b50c85083149 100644 --- a/Documentation/conf.py +++ b/Documentation/conf.py @@ -15,6 +15,18 @@ import sys import os import sphinx +import shutil + +# helper +# ------ + +def have_command(cmd): + """Search ``cmd`` in the ``PATH`` environment. + + If found, return True. + If not found, return False. + """ + return shutil.which(cmd) is not None # Get Sphinx version major, minor, patch = sphinx.version_info[:3] @@ -86,6 +98,7 @@ if major >= 3: "__used", "__weak", "noinline", + "__fix_address", # include/linux/memblock.h: "__init_memblock", @@ -106,7 +119,32 @@ else: autosectionlabel_prefix_document = True autosectionlabel_maxdepth = 2 -extensions.append("sphinx.ext.imgmath") +# Load math renderer: +# For html builder, load imgmath only when its dependencies are met. +# mathjax is the default math renderer since Sphinx 1.8. +have_latex = have_command('latex') +have_dvipng = have_command('dvipng') +load_imgmath = have_latex and have_dvipng + +# Respect SPHINX_IMGMATH (for html docs only) +if 'SPHINX_IMGMATH' in os.environ: + env_sphinx_imgmath = os.environ['SPHINX_IMGMATH'] + if 'yes' in env_sphinx_imgmath: + load_imgmath = True + elif 'no' in env_sphinx_imgmath: + load_imgmath = False + else: + sys.stderr.write("Unknown env SPHINX_IMGMATH=%s ignored.\n" % env_sphinx_imgmath) + +# Always load imgmath for Sphinx <1.8 or for epub docs +load_imgmath = (load_imgmath or (major == 1 and minor < 8) + or 'epub' in sys.argv) + +if load_imgmath: + extensions.append("sphinx.ext.imgmath") + math_renderer = 'imgmath' +else: + math_renderer = 'mathjax' # Add any paths that contain templates here, relative to this directory. templates_path = ['_templates'] @@ -332,7 +370,8 @@ html_static_path = ['sphinx-static'] html_use_smartypants = False # Custom sidebar templates, maps document names to template names. -#html_sidebars = {} +# Note that the RTD theme ignores this. +html_sidebars = { '**': ['searchbox.html', 'localtoc.html', 'sourcelink.html']} # Additional templates that should be rendered to pages, maps page names to # template names. diff --git a/Documentation/asm-annotations.rst b/Documentation/core-api/asm-annotations.rst index a64f2ca469d4..bc514ed59887 100644 --- a/Documentation/asm-annotations.rst +++ b/Documentation/core-api/asm-annotations.rst @@ -43,10 +43,11 @@ annotated objects like this, tools can be run on them to generate more useful information. In particular, on properly annotated objects, ``objtool`` can be run to check and fix the object if needed. Currently, ``objtool`` can report missing frame pointer setup/destruction in functions. It can also -automatically generate annotations for :doc:`ORC unwinder <x86/orc-unwinder>` +automatically generate annotations for the ORC unwinder +(Documentation/x86/orc-unwinder.rst) for most code. Both of these are especially important to support reliable -stack traces which are in turn necessary for :doc:`Kernel live patching -<livepatch/livepatch>`. +stack traces which are in turn necessary for kernel live patching +(Documentation/livepatch/livepatch.rst). Caveat and Discussion --------------------- diff --git a/Documentation/core-api/cpu_hotplug.rst b/Documentation/core-api/cpu_hotplug.rst index c6f4ba2fb32d..f75778d37488 100644 --- a/Documentation/core-api/cpu_hotplug.rst +++ b/Documentation/core-api/cpu_hotplug.rst @@ -560,7 +560,7 @@ available: * cpuhp_state_remove_instance(state, node) * cpuhp_state_remove_instance_nocalls(state, node) -The arguments are the same as for the the cpuhp_state_add_instance*() +The arguments are the same as for the cpuhp_state_add_instance*() variants above. The functions differ in the way how the installed callbacks are treated: diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst index dc95df462eea..b0e7b4771fff 100644 --- a/Documentation/core-api/index.rst +++ b/Documentation/core-api/index.rst @@ -23,6 +23,7 @@ it. printk-formats printk-index symbol-namespaces + asm-annotations Data structures and low-level utilities ======================================= @@ -44,6 +45,8 @@ Library functionality that is used throughout the kernel. this_cpu_ops timekeeping errseq + wrappers/atomic_t + wrappers/atomic_bitops Low level entry and exit ======================== @@ -67,6 +70,7 @@ Documentation/locking/index.rst for more related documentation. local_ops padata ../RCU/index + wrappers/memory-barriers.rst Low-level hardware management ============================= diff --git a/Documentation/core-api/irq/irq-domain.rst b/Documentation/core-api/irq/irq-domain.rst index d30b4d0a9769..f88a6ee67a35 100644 --- a/Documentation/core-api/irq/irq-domain.rst +++ b/Documentation/core-api/irq/irq-domain.rst @@ -71,7 +71,7 @@ variety of methods: Note that irq domain lookups must happen in contexts that are compatible with a RCU read-side critical section. -The irq_create_mapping() function must be called *atleast once* +The irq_create_mapping() function must be called *at least once* before any call to irq_find_mapping(), lest the descriptor will not be allocated. diff --git a/Documentation/core-api/printk-formats.rst b/Documentation/core-api/printk-formats.rst index 5e89497ba314..dbe1aacc79d0 100644 --- a/Documentation/core-api/printk-formats.rst +++ b/Documentation/core-api/printk-formats.rst @@ -625,6 +625,16 @@ Examples:: %p4cc Y10 little-endian (0x20303159) %p4cc NV12 big-endian (0xb231564e) +Rust +---- + +:: + + %pA + +Only intended to be used from Rust code to format ``core::fmt::Arguments``. +Do *not* use it from C. + Thanks ====== diff --git a/Documentation/core-api/wrappers/atomic_bitops.rst b/Documentation/core-api/wrappers/atomic_bitops.rst new file mode 100644 index 000000000000..bf24e4081a8f --- /dev/null +++ b/Documentation/core-api/wrappers/atomic_bitops.rst @@ -0,0 +1,18 @@ +.. SPDX-License-Identifier: GPL-2.0 + This is a simple wrapper to bring atomic_bitops.txt into the RST world + until such a time as that file can be converted directly. + +============= +Atomic bitops +============= + +.. raw:: latex + + \footnotesize + +.. include:: ../../atomic_bitops.txt + :literal: + +.. raw:: latex + + \normalsize diff --git a/Documentation/core-api/wrappers/atomic_t.rst b/Documentation/core-api/wrappers/atomic_t.rst new file mode 100644 index 000000000000..ed109a964c77 --- /dev/null +++ b/Documentation/core-api/wrappers/atomic_t.rst @@ -0,0 +1,19 @@ +.. SPDX-License-Identifier: GPL-2.0 + This is a simple wrapper to bring atomic_t.txt into the RST world + until such a time as that file can be converted directly. + +============ +Atomic types +============ + +.. raw:: latex + + \footnotesize + +.. include:: ../../atomic_t.txt + :literal: + +.. raw:: latex + + \normalsize + diff --git a/Documentation/core-api/wrappers/memory-barriers.rst b/Documentation/core-api/wrappers/memory-barriers.rst new file mode 100644 index 000000000000..532460b5e3eb --- /dev/null +++ b/Documentation/core-api/wrappers/memory-barriers.rst @@ -0,0 +1,18 @@ +.. SPDX-License-Identifier: GPL-2.0 + This is a simple wrapper to bring memory-barriers.txt into the RST world + until such a time as that file can be converted directly. + +============================ +Linux kernel memory barriers +============================ + +.. raw:: latex + + \footnotesize + +.. include:: ../../memory-barriers.txt + :literal: + +.. raw:: latex + + \normalsize diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml index 6cc74523ebfd..1748f1605cc7 100644 --- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic Meson Firmware registers Interface maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> description: | The Meson SoCs have a register bank with status and data shared with the diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml index 787d6673f952..84fb0a146b6e 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml @@ -20,6 +20,7 @@ properties: items: - enum: - mediatek,mt7622-wed + - mediatek,mt7986-wed - const: syscon reg: diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wed-pcie.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wed-pcie.yaml new file mode 100644 index 000000000000..96221f51c1c3 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wed-pcie.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7986-wed-pcie.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek PCIE WED Controller for MT7986 + +maintainers: + - Lorenzo Bianconi <lorenzo@kernel.org> + - Felix Fietkau <nbd@nbd.name> + +description: + The mediatek WED PCIE provides a configuration interface for PCIE + controller on MT7986 soc. + +properties: + compatible: + items: + - enum: + - mediatek,mt7986-wed-pcie + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + wed_pcie: wed-pcie@10003000 { + compatible = "mediatek,mt7986-wed-pcie", + "syscon"; + reg = <0 0x10003000 0 0x10>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml index 2e208d2fc98f..7cdffdb131ac 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic specific extensions to the Synopsys Designware HDMI Controller maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> allOf: - $ref: /schemas/sound/name-prefix.yaml# diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml index 047fd69e0377..6655a93b1874 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml +++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic Meson Display Controller maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> description: | The Amlogic Meson Display controller is composed of several components diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml index bce96b5b0db0..4a5e5d9d6f90 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml @@ -8,7 +8,7 @@ title: Analogix ANX7814 SlimPort (Full-HD Transmitter) maintainers: - Andrzej Hajda <andrzej.hajda@intel.com> - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> - Robert Foss <robert.foss@linaro.org> properties: diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml index 4f0b7c71313c..5fb54375aeb6 100644 --- a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml @@ -24,6 +24,15 @@ properties: maxItems: 1 description: virtual channel number of a DSI peripheral + clock-names: + const: refclk + + clocks: + maxItems: 1 + description: | + Optional external clock connected to REF_CLK input. + The clock rate must be in 10..154 MHz range. + enable-gpios: description: Bridge EN pin, chip is reset when EN is low. diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml index c6e81f532215..1b2185be92cd 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml @@ -8,7 +8,7 @@ title: ITE it66121 HDMI bridge Device Tree Bindings maintainers: - Phong LE <ple@baylibre.com> - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> description: | The IT66121 is a high-performance and low-power single channel HDMI diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml index 0c9785c8db51..e3ec697f89e7 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml @@ -38,6 +38,9 @@ properties: clock-names: maxItems: 2 + resets: + maxItems: 1 + ports: $ref: /schemas/graph.yaml#/properties/ports @@ -67,6 +70,7 @@ required: - reg - clocks - clock-names + - resets - interrupts - ports @@ -85,6 +89,7 @@ examples: clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>; clock-names = "iahb", "isfr"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 729>; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml index 0049010b37ca..c0bb02fb49f4 100644 --- a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml +++ b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml @@ -17,6 +17,8 @@ properties: enum: - ingenic,jz4740-lcd - ingenic,jz4725b-lcd + - ingenic,jz4760-lcd + - ingenic,jz4760b-lcd - ingenic,jz4770-lcd - ingenic,jz4780-lcd diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml new file mode 100644 index 000000000000..ff781f2174a0 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Display Port Controller + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Jitao shi <jitao.shi@mediatek.com> + +description: | + MediaTek DP and eDP are different hardwares and there are some features + which are not supported for eDP. For example, audio is not supported for + eDP. Therefore, we need to use two different compatibles to describe them. + In addition, We just need to enable the power domain of DP, so the clock + of DP is generated by itself and we are not using other PLL to generate + clocks. + +properties: + compatible: + enum: + - mediatek,mt8195-dp-tx + - mediatek,mt8195-edp-tx + + reg: + maxItems: 1 + + nvmem-cells: + maxItems: 1 + description: efuse data for display port calibration + + nvmem-cell-names: + const: dp_calibration_data + + power-domains: + maxItems: 1 + + interrupts: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input endpoint of the controller, usually dp_intf + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Output endpoint of the controller + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + properties: + data-lanes: + description: | + number of lanes supported by the hardware. + The possible values: + 0 - For 1 lane enabled in IP. + 0 1 - For 2 lanes enabled in IP. + 0 1 2 3 - For 4 lanes enabled in IP. + minItems: 1 + maxItems: 4 + required: + - data-lanes + + required: + - port@0 + - port@1 + + max-linkrate-mhz: + enum: [ 1620, 2700, 5400, 8100 ] + description: maximum link rate supported by the hardware. + +required: + - compatible + - reg + - interrupts + - ports + - max-linkrate-mhz + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/mt8195-power.h> + dptx@1c600000 { + compatible = "mediatek,mt8195-dp-tx"; + reg = <0x1c600000 0x8000>; + power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>; + interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>; + max-linkrate-mhz = <8100>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dptx_in: endpoint { + remote-endpoint = <&dp_intf0_out>; + }; + }; + port@1 { + reg = <1>; + dptx_out: endpoint { + data-lanes = <0 1 2 3>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml index 94bc6e1b6451..f2515af8256f 100644 --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -24,6 +24,7 @@ properties: - qcom,sm8350-dp reg: + minItems: 4 items: - description: ahb register block - description: aux register block @@ -70,14 +71,28 @@ properties: operating-points-v2: maxItems: 1 + opp-table: true + power-domains: maxItems: 1 + aux-bus: + $ref: /schemas/display/dp-aux-bus.yaml# + + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + items: + maximum: 3 + "#sound-dai-cells": const: 0 - vdda-0p9-supply: true - vdda-1p2-supply: true + vdda-0p9-supply: + deprecated: true + vdda-1p2-supply: + deprecated: true ports: $ref: /schemas/graph.yaml#/properties/ports @@ -98,10 +113,33 @@ required: - clock-names - phys - phy-names - - "#sound-dai-cells" - power-domains - ports +allOf: + # AUX BUS does not exist on DP controllers + # Audio output also is present only on DP output + # p1 regions is present on DP, but not on eDP + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7280-edp + - qcom,sc8180x-edp + then: + properties: + "#sound-dai-cells": false + reg: + maxItems: 4 + else: + properties: + aux-bus: false + reg: + minItems: 5 + required: + - "#sound-dai-cells" + additionalProperties: false examples: @@ -140,9 +178,6 @@ examples: power-domains = <&rpmhpd SC7180_CX>; - vdda-0p9-supply = <&vdda_usb_ss_dp_core>; - vdda-1p2-supply = <&vdda_usb_ss_dp_1p2>; - ports { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml index 2df64afb76e6..253665c693e6 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml @@ -62,6 +62,7 @@ patternProperties: "^display-controller@[0-9a-f]+$": type: object description: Node containing the properties of DPU. + additionalProperties: false properties: compatible: @@ -105,6 +106,9 @@ patternProperties: maxItems: 1 operating-points-v2: true + opp-table: + type: object + ports: $ref: /schemas/graph.yaml#/properties/ports description: | diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml index 734d14de966d..c5824e1d2382 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml @@ -74,6 +74,7 @@ patternProperties: "^display-controller@[0-9a-f]+$": type: object description: Node containing the properties of DPU. + additionalProperties: false properties: compatible: @@ -113,6 +114,8 @@ patternProperties: maxItems: 1 operating-points-v2: true + opp-table: + type: object ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml index d3c3e4b07897..4890bc25f3fd 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml @@ -73,6 +73,7 @@ patternProperties: "^display-controller@[0-9a-f]+$": type: object description: Node containing the properties of DPU. + additionalProperties: false properties: compatible: @@ -114,6 +115,8 @@ patternProperties: maxItems: 1 operating-points-v2: true + opp-table: + type: object ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml index f427eec3d3a4..584d646021d5 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml @@ -72,6 +72,7 @@ patternProperties: "^display-controller@[0-9a-f]+$": type: object description: Node containing the properties of DPU. + additionalProperties: false properties: compatible: @@ -112,6 +113,8 @@ patternProperties: maxItems: 1 operating-points-v2: true + opp-table: + type: object ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml index 2bb8896beffc..7d1037373175 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml @@ -65,6 +65,7 @@ patternProperties: "^display-controller@[0-9a-f]+$": type: object description: Node containing the properties of DPU. + additionalProperties: false properties: compatible: @@ -102,6 +103,9 @@ patternProperties: maxItems: 1 operating-points-v2: true + opp-table: + type: object + ports: $ref: /schemas/graph.yaml#/properties/ports description: | diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml index fe55611d2603..67fdeeabae0c 100644 --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -20,35 +20,24 @@ description: | properties: compatible: items: - - enum: - - qcom,adreno-gmu-630.2 + - pattern: '^qcom,adreno-gmu-6[0-9][0-9]\.[0-9]$' - const: qcom,adreno-gmu reg: - items: - - description: Core GMU registers - - description: GMU PDC registers - - description: GMU PDC sequence registers + minItems: 3 + maxItems: 4 reg-names: - items: - - const: gmu - - const: gmu_pdc - - const: gmu_pdc_seq + minItems: 3 + maxItems: 4 clocks: - items: - - description: GMU clock - - description: GPU CX clock - - description: GPU AXI clock - - description: GPU MEMNOC clock + minItems: 4 + maxItems: 7 clock-names: - items: - - const: gmu - - const: cxo - - const: axi - - const: memnoc + minItems: 4 + maxItems: 7 interrupts: items: @@ -76,6 +65,9 @@ properties: operating-points-v2: true + opp-table: + type: object + required: - compatible - reg @@ -91,6 +83,140 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,adreno-gmu-618.0 + - qcom,adreno-gmu-630.2 + then: + properties: + reg: + items: + - description: Core GMU registers + - description: GMU PDC registers + - description: GMU PDC sequence registers + reg-names: + items: + - const: gmu + - const: gmu_pdc + - const: gmu_pdc_seq + clocks: + items: + - description: GMU clock + - description: GPU CX clock + - description: GPU AXI clock + - description: GPU MEMNOC clock + clock-names: + items: + - const: gmu + - const: cxo + - const: axi + - const: memnoc + + - if: + properties: + compatible: + contains: + enum: + - qcom,adreno-gmu-635.0 + then: + properties: + reg: + items: + - description: Core GMU registers + - description: Resource controller registers + - description: GMU PDC registers + reg-names: + items: + - const: gmu + - const: rscc + - const: gmu_pdc + clocks: + items: + - description: GMU clock + - description: GPU CX clock + - description: GPU AXI clock + - description: GPU MEMNOC clock + - description: GPU AHB clock + - description: GPU HUB CX clock + - description: GPU SMMU vote clock + clock-names: + items: + - const: gmu + - const: cxo + - const: axi + - const: memnoc + - const: ahb + - const: hub + - const: smmu_vote + + - if: + properties: + compatible: + contains: + enum: + - qcom,adreno-gmu-640.1 + then: + properties: + reg: + items: + - description: Core GMU registers + - description: GMU PDC registers + - description: GMU PDC sequence registers + reg-names: + items: + - const: gmu + - const: gmu_pdc + - const: gmu_pdc_seq + + - if: + properties: + compatible: + contains: + enum: + - qcom,adreno-gmu-650.2 + then: + properties: + reg: + items: + - description: Core GMU registers + - description: Resource controller registers + - description: GMU PDC registers + - description: GMU PDC sequence registers + reg-names: + items: + - const: gmu + - const: rscc + - const: gmu_pdc + - const: gmu_pdc_seq + + - if: + properties: + compatible: + contains: + enum: + - qcom,adreno-gmu-640.1 + - qcom,adreno-gmu-650.2 + then: + properties: + clocks: + items: + - description: GPU AHB clock + - description: GMU clock + - description: GPU CX clock + - description: GPU AXI clock + - description: GPU MEMNOC clock + clock-names: + items: + - const: ahb + - const: gmu + - const: cxo + - const: axi + - const: memnoc + examples: - | #include <dt-bindings/clock/qcom,gpucc-sdm845.h> diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml index 3397bc31d087..346aabdccf7b 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml @@ -58,7 +58,8 @@ properties: - const: ocmem iommus: - maxItems: 1 + minItems: 1 + maxItems: 64 sram: $ref: /schemas/types.yaml#/definitions/phandle-array diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.yaml b/Documentation/devicetree/bindings/display/msm/mdp4.yaml index f63f60fea27c..58c13f5277b6 100644 --- a/Documentation/devicetree/bindings/display/msm/mdp4.yaml +++ b/Documentation/devicetree/bindings/display/msm/mdp4.yaml @@ -36,7 +36,7 @@ properties: maxItems: 1 iommus: - maxItems: 1 + maxItems: 4 ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml index 2a2756d19681..b4be9bd8ddde 100644 --- a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml +++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml @@ -23,6 +23,8 @@ properties: reg: true reset-gpios: true + spi-3wire: true + required: - compatible - power-supply diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml index 817a9bed7d5a..ebdca5f5a001 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml @@ -24,6 +24,8 @@ properties: reg: true reset-gpios: true + spi-3wire: true + required: - compatible - power-supply diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index bc8e9c0c1dc3..18241f4051d2 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -234,6 +234,8 @@ properties: - mitsubishi,aa070mc01-ca1 # Multi-Inno Technology Co.,Ltd MI0700S4T-6 7" 800x480 TFT Resistive Touch Module - multi-inno,mi0700s4t-6 + # Multi-Inno Technology Co.,Ltd MI0800FT-9 8" 800x600 TFT Resistive Touch Module + - multi-inno,mi0800ft-9 # Multi-Inno Technology Co.,Ltd MI1010AIT-1CP 10.1" 1280x800 LVDS IPS Cap Touch Mod. - multi-inno,mi1010ait-1cp # NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel @@ -280,6 +282,8 @@ properties: - samsung,atna33xc20 # Samsung 12.2" (2560x1600 pixels) TFT LCD panel - samsung,lsn122dl01-c01 + # Samsung Electronics 10.1" WXGA (1280x800) TFT LCD panel + - samsung,ltl101al01 # Samsung Electronics 10.1" WSVGA TFT LCD panel - samsung,ltn101nt05 # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml index 940f7f88526f..6f1fc7469f07 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml @@ -24,6 +24,10 @@ properties: default-brightness: true max-brightness: true + spi-3wire: true + spi-cpha: true + spi-cpol: true + vdd3-supply: description: VDD regulator diff --git a/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml index 44e02decdf3a..2e75e3738ff0 100644 --- a/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml +++ b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Solomon Goldentek Display GKTW70SDAE4SE 7" WVGA LVDS Display Panel maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> - Thierry Reding <thierry.reding@gmail.com> allOf: diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml index 6dff59fe4be1..34d5e20c6cb3 100644 --- a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml @@ -17,6 +17,9 @@ description: | Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has inbuilt ST7701 chip. + Densitron DMT028VGHMCMI-1A is 480x640, 2-lane MIPI DSI LCD panel + which has built-in ST7701 chip. + allOf: - $ref: panel-common.yaml# @@ -24,6 +27,7 @@ properties: compatible: items: - enum: + - densitron,dmt028vghmcmi-1a - techstar,ts8550b - const: sitronix,st7701 diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt index 39792f051d2d..9a223df8530c 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt @@ -8,6 +8,7 @@ Required properties: "rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi" "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi" "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi" + "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi" - reg: Represent the physical address range of the controller. - interrupts: Represent the controller's interrupt to the CPU(s). - clocks, clock-names: Phandles to the controller's pll reference diff --git a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt index 8a9f3559335b..7e14e26676ec 100644 --- a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt +++ b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt @@ -34,8 +34,8 @@ Example: Use specific request line passing from dma For example, MMC request line is 5 - sdhci: sdhci@98e00000 { - compatible = "moxa,moxart-sdhci"; + mmc: mmc@98e00000 { + compatible = "moxa,moxart-mmc"; reg = <0x98e00000 0x5C>; interrupts = <5 0>; clocks = <&clk_apb>; diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml index e66ef2da7879..9af40da5688e 100644 --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml @@ -20,6 +20,7 @@ properties: - fsl,imx8qxp-dsp - fsl,imx8qm-dsp - fsl,imx8mp-dsp + - fsl,imx8ulp-dsp - fsl,imx8qxp-hifi4 - fsl,imx8qm-hifi4 - fsl,imx8mp-hifi4 diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml new file mode 100644 index 000000000000..9f2d08d7b978 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,max31760.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX31760 Fan-Speed Controller + +maintainers: + - Ibrahim Tilki <Ibrahim.Tilki@analog.com> + +description: | + Analog Devices MAX31760 Fan-Speed Controller + https://datasheets.maximintegrated.com/en/ds/MAX31760.pdf + +properties: + compatible: + enum: + - adi,max31760 + + reg: + description: I2C address of slave device. + minimum: 0x50 + maximum: 0x57 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + fan-controller@50 { + reg = <0x50>; + compatible = "adi,max31760"; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml index 76be625d5646..51e8619dbf3c 100644 --- a/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml +++ b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml @@ -22,7 +22,7 @@ properties: clocks: items: - - description: AHB reference clock + - description: System reference clock '#thermal-sensor-cells': const: 0 @@ -40,5 +40,5 @@ examples: compatible = "microchip,sparx5-temp"; reg = <0x10508110 0xc>; #thermal-sensor-cells = <0>; - clocks = <&ahb_clk>; + clocks = <&sys_clk>; }; diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml index b79f069a04c2..d0d549749208 100644 --- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml @@ -9,6 +9,32 @@ title: Moortec Semiconductor MR75203 PVT Controller bindings maintainers: - Rahul Tanwar <rtanwar@maxlinear.com> +description: | + A Moortec PVT (Process, Voltage, Temperature) monitoring logic design can + include many different units. + Such a design will usually consists of several Moortec's embedded analog IPs, + and a single Moortec controller (mr75203) to configure and control the IPs. + + Some of the Moortec's analog hard IPs that can be used in a design: + *) Temperature Sensor (TS) - used to monitor core temperature (e.g. mr74137). + *) Voltage Monitor (VM) - used to monitor voltage levels (e.g. mr74138). + *) Process Detector (PD) - used to assess silicon speed (e.g. mr74139). + *) Delay Chain - ring oscillator connected to the PD, used to measure IO + based transistors (e.g. mr76008 ring oscillator at 1.1V, mr76007 ring + oscillator at 1.8V). + *) Pre Scaler - provides divide-by-X scaling of input voltage, which can then + be presented for VM for measurement within its range (e.g. mr76006 - + divide by 2 pre-scaler). + + TS, VM & PD also include a digital interface, which consists of configuration + inputs and measurement outputs. + + Some of the units have number of series, each series can have slightly + different characteristics. + + The mr75203 binding describes configuration for the controller unit, but also + for some of the analog IPs. + properties: compatible: const: moortec,mr75203 @@ -44,13 +70,76 @@ properties: "#thermal-sensor-cells": const: 1 + moortec,vm-active-channels: + description: + Defines the number of channels per VM that are actually used and are + connected to some input source. + Maximum number of items - number of VMs. + Maximum value of each item - number of channels. + Minimum value of each item - 0 (which means entire VM sensor is not used). + $ref: /schemas/types.yaml#/definitions/uint8-array + + moortec,vm-pre-scaler-x2: + description: + Defines the channels that use a mr76006 pre-scaler to divide the input + source by 2. + The pre-scaler is used for input sources that exceed the VM input range. + The driver uses this information to present to the user with the actual + value of the voltage source. + For channels that are not listed, no pre-scaler is assumed. + Maximum number of items - total number of channels in all VMs. + Each channel should not appear more than once. + $ref: /schemas/types.yaml#/definitions/uint8-array + + moortec,ts-series: + description: + Definition of the temperature equation and coefficients that shall be + used to convert the digital output to value in milli-Celsius. + minimum: 5 + maximum: 6 + default: 5 + $ref: /schemas/types.yaml#/definitions/uint32 + + moortec,ts-coeff-g: + description: + G coefficient for temperature equation. + Default for series 5 = 60000 + Default for series 6 = 57400 + multipleOf: 1000 + minimum: 1000 + $ref: /schemas/types.yaml#/definitions/uint32 + + moortec,ts-coeff-h: + description: + H coefficient for temperature equation. + Default for series 5 = 200000 + Default for series 6 = 249400 + multipleOf: 1000 + minimum: 1000 + $ref: /schemas/types.yaml#/definitions/uint32 + + moortec,ts-coeff-cal5: + description: + cal5 coefficient for temperature equation. + Default for series 5 = 4094 + Default for series 6 = 4096 + minimum: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + + moortec,ts-coeff-j: + description: + J coefficient for temperature equation. + Default for series 5 = -100 + Default for series 6 = 0 + multipleOf: 1000 + maximum: 0 + $ref: /schemas/types.yaml#/definitions/int32 + required: - compatible - reg - reg-names - - intel,vm-map - clocks - - resets - "#thermal-sensor-cells" additionalProperties: false @@ -67,5 +156,9 @@ examples: intel,vm-map = [03 01 04 ff ff]; clocks = <&osc0>; resets = <&rcu0 0x40 7>; + moortec,vm-active-channels = /bits/ 8 <0x10 0x05>; + moortec,vm-pre-scaler-x2 = /bits/ 8 <5 6 20>; + moortec,ts-coeff-g = <61400>; + moortec,ts-coeff-h = <253700>; #thermal-sensor-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml index 7d49478d9668..159238efa9ed 100644 --- a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml +++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml @@ -10,7 +10,7 @@ maintainers: - Christopher Ruehl chris.ruehl@gtsys.com.hk description: | - The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor + The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensors designed especially for battery-driven high-volume consumer electronics applications. For further information refere to Documentation/hwmon/shtc1.rst @@ -31,13 +31,13 @@ properties: sensirion,blocking-io: $ref: /schemas/types.yaml#/definitions/flag description: - If set, the driver hold the i2c bus until measurement is finished. + If set, the driver holds the i2c bus until the measurement is finished. sensirion,low-precision: $ref: /schemas/types.yaml#/definitions/flag description: - If set, the sensor aquire data with low precision (not recommended). - The driver aquire data with high precision by default. + If set, the sensor acquires data with low precision (not recommended). + The driver acquires data with high precision by default. required: - compatible diff --git a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml index 6ecb0270d88d..199a354ccb97 100644 --- a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic Meson I2C Controller maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> - Beniamino Galvani <b.galvani@gmail.com> allOf: diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml index 529bea56d324..4656f5112b84 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml @@ -23,6 +23,7 @@ properties: - fsl,imx8dxl-lpi2c - fsl,imx8qm-lpi2c - fsl,imx8ulp-lpi2c + - fsl,imx93-lpi2c - const: fsl,imx7ulp-lpi2c reg: @@ -37,10 +38,22 @@ properties: clock-frequency: true clock-names: - maxItems: 1 + items: + - const: per + - const: ipg clocks: - maxItems: 1 + maxItems: 2 + + dmas: + items: + - description: DMA controller phandle and request line for TX + - description: DMA controller phandle and request line for RX + + dma-names: + items: + - const: tx + - const: rx power-domains: maxItems: 1 @@ -63,5 +76,6 @@ examples: reg = <0x40A50000 0x10000>; interrupt-parent = <&intc>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7ULP_CLK_LPI2C7>; + clocks = <&clks IMX7ULP_CLK_LPI2C7>, + <&clks IMX7ULP_CLK_NIC1_BUS_DIV>; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml index 01720e338b4c..85ee1282d6d2 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml @@ -19,6 +19,17 @@ properties: - const: fsl,imx21-i2c - const: fsl,vf610-i2c - items: + - enum: + - fsl,ls1012a-i2c + - fsl,ls1021a-i2c + - fsl,ls1028a-i2c + - fsl,ls1043a-i2c + - fsl,ls1046a-i2c + - fsl,ls1088a-i2c + - fsl,ls208xa-i2c + - fsl,lx2160a-i2c + - const: fsl,vf610-i2c + - items: - const: fsl,imx35-i2c - const: fsl,imx1-i2c - items: diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml index ee9f8b91d2e2..82b9d6682297 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml @@ -29,6 +29,7 @@ properties: - items: - enum: - rockchip,rk3036-i2c + - rockchip,rk3128-i2c - rockchip,rk3368-i2c - const: rockchip,rk3288-i2c - items: diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml index 0ec033e48830..63d665a4f9bb 100644 --- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml @@ -66,6 +66,19 @@ properties: resets: maxItems: 1 + dmas: + items: + - description: RX DMA Channel + - description: TX DMA Channel + + dma-names: + items: + - const: rx + - const: tx + +dependencies: + dmas: [ dma-names ] + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml deleted file mode 100644 index 93198d5d43a6..000000000000 --- a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml +++ /dev/null @@ -1,77 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/i2c/mellanox,i2c-mlxbf.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Mellanox I2C SMBus on BlueField SoCs - -maintainers: - - Khalil Blaiech <kblaiech@nvidia.com> - -allOf: - - $ref: /schemas/i2c/i2c-controller.yaml# - -properties: - compatible: - enum: - - mellanox,i2c-mlxbf1 - - mellanox,i2c-mlxbf2 - - reg: - minItems: 3 - items: - - description: Smbus block registers - - description: Cause master registers - - description: Cause slave registers - - description: Cause coalesce registers - - interrupts: - maxItems: 1 - - clock-frequency: - enum: [ 100000, 400000, 1000000 ] - description: - bus frequency used to configure timing registers; - The frequency is expressed in Hz. Default is 100000. - -required: - - compatible - - reg - - interrupts - -unevaluatedProperties: false - -if: - properties: - compatible: - contains: - enum: - - mellanox,i2c-mlxbf1 - -then: - properties: - reg: - maxItems: 3 - -examples: - - | - i2c@2804000 { - compatible = "mellanox,i2c-mlxbf1"; - reg = <0x02804000 0x800>, - <0x02801200 0x020>, - <0x02801260 0x020>; - interrupts = <57>; - clock-frequency = <100000>; - }; - - - | - i2c@2808800 { - compatible = "mellanox,i2c-mlxbf2"; - reg = <0x02808800 0x600>, - <0x02808e00 0x020>, - <0x02808e20 0x020>, - <0x02808e40 0x010>; - interrupts = <57>; - clock-frequency = <400000>; - }; diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml index 90c9e401229e..e51a85848d6e 100644 --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml @@ -126,6 +126,7 @@ allOf: contains: enum: - qcom,sm8250-cci + - qcom,sm8450-cci then: properties: clocks: diff --git a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml index f9929578c761..c4ace5585e1e 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml @@ -52,6 +52,7 @@ properties: - enum: - renesas,i2c-r8a779a0 # R-Car V3U - renesas,i2c-r8a779f0 # R-Car S4-8 + - renesas,i2c-r8a779g0 # R-Car V4H - const: renesas,rcar-gen4-i2c # R-Car Gen4 reg: diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml index 2f315489aaae..d3c0d5c427ac 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml +++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml @@ -60,6 +60,9 @@ properties: power-domains: maxItems: 1 + resets: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml index a41588763786..bf396e9466aa 100644 --- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml @@ -57,6 +57,11 @@ properties: - description: interrupt ID for I2C event - description: interrupt ID for I2C error + interrupt-names: + items: + - const: event + - const: error + resets: maxItems: 1 @@ -92,6 +97,8 @@ properties: - description: register offset within syscfg - description: register bitmask for FMP bit + wakeup-source: true + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml index b6bbc312a7cf..1414ba9977c1 100644 --- a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml +++ b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml @@ -24,8 +24,10 @@ properties: interrupts: minItems: 1 + maxItems: 2 description: Should be configured with type IRQ_TYPE_EDGE_RISING. + If two interrupts are provided, expected order is INT1 and INT2. required: - compatible diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml index 93f2ce3130ae..19ac9da421df 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml @@ -16,6 +16,7 @@ properties: compatible: enum: - goodix,gt1151 + - goodix,gt1158 - goodix,gt5663 - goodix,gt5688 - goodix,gt911 diff --git a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml index 09c8948b5e25..fa4f7685ab2b 100644 --- a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml +++ b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Generic i.MX bus frequency device maintainers: - - Leonard Crestez <leonard.crestez@nxp.com> + - Peng Fan <peng.fan@nxp.com> description: | The i.MX SoC family has multiple buses for which clock frequency (and diff --git a/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml b/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml index 85c85b694217..e18107eafe7c 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml @@ -96,7 +96,7 @@ properties: Documentation/devicetree/bindings/arm/cpus.yaml). required: - - fiq-index + - apple,fiq-index - cpus required: diff --git a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml new file mode 100644 index 000000000000..5533b6562d92 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/mediatek,mt6370-backlight.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6370 Backlight + +maintainers: + - ChiaEn Wu <chiaen_wu@richtek.com> + +description: | + This module is part of the MT6370 MFD device. + The MT6370 Backlight WLED driver supports up to a 29V output voltage for + 4 channels of 8 series WLEDs. Each channel supports up to 30mA of current + capability with 2048 current steps (11 bits, only for MT6370/MT6371) or + 16384 current steps (14 bits, only for MT6372) in exponential or linear + mapping curves. + +allOf: + - $ref: common.yaml# + +properties: + compatible: + enum: + - mediatek,mt6370-backlight + - mediatek,mt6372-backlight + + default-brightness: + minimum: 0 + + max-brightness: + minimum: 0 + + enable-gpios: + description: External backlight 'enable' pin + maxItems: 1 + + mediatek,bled-pwm-enable: + description: | + Enable external PWM input for backlight dimming + type: boolean + + mediatek,bled-pwm-hys-enable: + description: | + Enable the backlight input-hysteresis for PWM mode + type: boolean + + mediatek,bled-pwm-hys-input-th-steps: + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [1, 4, 16, 64] + description: | + The selection of the upper and lower bounds threshold of backlight + PWM resolution. If we choose selection 64, the variation of PWM + resolution needs more than 64 steps. + + mediatek,bled-ovp-shutdown: + description: | + Enable the backlight shutdown when OVP level triggered + type: boolean + + mediatek,bled-ovp-microvolt: + enum: [17000000, 21000000, 25000000, 29000000] + description: | + Backlight OVP level selection. + + mediatek,bled-ocp-shutdown: + description: | + Enable the backlight shutdown when OCP level triggerred. + type: boolean + + mediatek,bled-ocp-microamp: + enum: [900000, 1200000, 1500000, 1800000] + description: | + Backlight OC level selection. + + mediatek,bled-exponential-mode-enable: + description: | + Enable the exponential mode of backlight brightness. If this property + is not enabled, the default is to use linear mode. + type: boolean + + mediatek,bled-channel-use: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + Backlight LED channel to be used. + Each bit mapping to: + - 0: CH4 + - 1: CH3 + - 2: CH2 + - 3: CH1 + minimum: 1 + maximum: 15 + +if: + properties: + compatible: + contains: + const: mediatek,mt6372-backlight + +then: + properties: + default-brightness: + maximum: 16384 + + max-brightness: + maximum: 16384 + +else: + properties: + default-brightness: + maximum: 2048 + + max-brightness: + maximum: 2048 + +required: + - compatible + - mediatek,bled-channel-use + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml index ea06976fbbc7..dfd26b998189 100644 --- a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml +++ b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic Meson Message-Handling-Unit Controller maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> description: | The Amlogic's Meson SoCs Message-Handling-Unit (MHU) is a mailbox controller diff --git a/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml b/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml index bee93bd84771..e551be5e680e 100644 --- a/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic GE2D Acceleration Unit maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml index 5044c4bb94e0..b827edabcafa 100644 --- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic Video Decoder maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> - Maxime Jourdan <mjourdan@baylibre.com> description: | diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml index d93aea6a0258..8d844f4312d1 100644 --- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic Meson AO-CEC Controller maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> description: | The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml index 445e46feda69..2b39fce5f650 100644 --- a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: i.MX8M DDR Controller maintainers: - - Leonard Crestez <leonard.crestez@nxp.com> + - Peng Fan <peng.fan@nxp.com> description: The DDRC block is integrated in i.MX8M for interfacing with DDR based diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml index 85e02854f083..6ccdaf99c778 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml @@ -11,7 +11,9 @@ maintainers: properties: compatible: - const: mediatek,mt7621-memc + items: + - const: mediatek,mt7621-memc + - const: syscon reg: maxItems: 1 @@ -25,6 +27,6 @@ additionalProperties: false examples: - | memory-controller@5000 { - compatible = "mediatek,mt7621-memc"; + compatible = "mediatek,mt7621-memc", "syscon"; reg = <0x5000 0x1000>; }; diff --git a/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml index a3b976f101e8..5750cc06e923 100644 --- a/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml +++ b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Khadas on-board Microcontroller Device Tree Bindings maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> description: | Khadas embeds a microcontroller on their VIM and Edge boards adding some diff --git a/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml new file mode 100644 index 000000000000..8bf45a5673a4 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mscc,ocelot.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ocelot Externally-Controlled Ethernet Switch + +maintainers: + - Colin Foster <colin.foster@in-advantage.com> + +description: | + The Ocelot ethernet switch family contains chips that have an internal CPU + (VSC7513, VSC7514) and chips that don't (VSC7511, VSC7512). All switches have + the option to be controlled externally, which is the purpose of this driver. + + The switch family is a multi-port networking switch that supports many + interfaces. Additionally, the device can perform pin control, MDIO buses, and + external GPIO expanders. + +properties: + compatible: + enum: + - mscc,vsc7512 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + spi-max-frequency: + maxItems: 1 + +patternProperties: + "^pinctrl@[0-9a-f]+$": + type: object + $ref: /schemas/pinctrl/mscc,ocelot-pinctrl.yaml + + "^gpio@[0-9a-f]+$": + type: object + $ref: /schemas/pinctrl/microchip,sparx5-sgpio.yaml + properties: + compatible: + enum: + - mscc,ocelot-sgpio + + "^mdio@[0-9a-f]+$": + type: object + $ref: /schemas/net/mscc,miim.yaml + properties: + compatible: + enum: + - mscc,ocelot-miim + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + - spi-max-frequency + +additionalProperties: false + +examples: + - | + ocelot_clock: ocelot-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + soc@0 { + compatible = "mscc,vsc7512"; + spi-max-frequency = <2500000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + mdio@7107009c { + compatible = "mscc,ocelot-miim"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7107009c 0x24>; + + sw_phy0: ethernet-phy@0 { + reg = <0x0>; + }; + }; + + mdio@710700c0 { + compatible = "mscc,ocelot-miim"; + pinctrl-names = "default"; + pinctrl-0 = <&miim1_pins>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x710700c0 0x24>; + + sw_phy4: ethernet-phy@4 { + reg = <0x4>; + }; + }; + + gpio: pinctrl@71070034 { + compatible = "mscc,ocelot-pinctrl"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 22>; + reg = <0x71070034 0x6c>; + + sgpio_pins: sgpio-pins { + pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3"; + function = "sg0"; + }; + + miim1_pins: miim1-pins { + pins = "GPIO_14", "GPIO_15"; + function = "miim"; + }; + }; + + gpio@710700f8 { + compatible = "mscc,ocelot-sgpio"; + #address-cells = <1>; + #size-cells = <0>; + bus-frequency = <12500000>; + clocks = <&ocelot_clock>; + microchip,sgpio-port-ranges = <0 15>; + pinctrl-names = "default"; + pinctrl-0 = <&sgpio_pins>; + reg = <0x710700f8 0x100>; + + sgpio_in0: gpio@0 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <0>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <64>; + }; + + sgpio_out1: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <64>; + }; + }; + }; + }; + +... + diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml index 4207fed62dfe..8b1a0fdcb5e3 100644 --- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml @@ -8,7 +8,6 @@ title: Cadence SD/SDIO/eMMC Host Controller (SD4HC) maintainers: - Masahiro Yamada <yamada.masahiro@socionext.com> - - Piotr Sroka <piotrs@cadence.com> allOf: - $ref: mmc-controller.yaml diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index ff5ce89e5111..802e3ca8be4d 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -88,11 +88,18 @@ properties: default: 1 max-frequency: - description: - Maximum operating frequency of the bus. + description: | + Maximum operating frequency of the bus: + - for eMMC, the maximum supported frequency is 200MHz, + - for SD/SDIO cards the SDR104 mode has a max supported + frequency of 208MHz, + - some mmc host controllers do support a max frequency upto + 384MHz. + So, lets keep the maximum supported value here. + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 400000 - maximum: 200000000 + maximum: 384000000 disable-wp: $ref: /schemas/types.yaml#/definitions/flag diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml index c45b91099325..c0662ce9946d 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml @@ -23,8 +23,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml index 083d1ec2f661..d8e1e2e9adf2 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml @@ -20,6 +20,7 @@ properties: - mediatek,mt2701-mmc - mediatek,mt2712-mmc - mediatek,mt6779-mmc + - mediatek,mt6795-mmc - mediatek,mt7620-mmc - mediatek,mt7622-mmc - mediatek,mt8135-mmc diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml index 14945ebc31d2..0424b06cb655 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml @@ -89,6 +89,9 @@ properties: - tx - rx + iommus: + maxItems: 1 + power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml index 8d888b435817..ccf0e3e93efa 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml @@ -32,6 +32,7 @@ properties: - rockchip,px30-dw-mshc - rockchip,rk1808-dw-mshc - rockchip,rk3036-dw-mshc + - rockchip,rk3128-dw-mshc - rockchip,rk3228-dw-mshc - rockchip,rk3308-dw-mshc - rockchip,rk3328-dw-mshc diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml index 0ab07759b472..ea9121fb188d 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml @@ -51,6 +51,9 @@ properties: sdhci-caps-mask: true + dma-coherent: + type: boolean + # PHY output tap delays: # Used to delay the data valid window and align it to the sampling clock. # Binding needs to be provided for each supported speed mode otherwise the diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml index fc0e81c2066c..a96f143479c7 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml @@ -38,9 +38,11 @@ properties: - qcom,sc7180-sdhci - qcom,sc7280-sdhci - qcom,sdm630-sdhci + - qcom,sdm670-sdhci - qcom,sdm845-sdhci - qcom,sdx55-sdhci - qcom,sdx65-sdhci + - qcom,sm6115-sdhci - qcom,sm6125-sdhci - qcom,sm6350-sdhci - qcom,sm8150-sdhci @@ -96,6 +98,10 @@ properties: description: Should specify pin control groups used for this controller. + pinctrl-1: + description: + Should specify sleep pin control groups used for this controller. + resets: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/adi,adin1110.yaml b/Documentation/devicetree/bindings/net/adi,adin1110.yaml new file mode 100644 index 000000000000..b6bd8ee38a18 --- /dev/null +++ b/Documentation/devicetree/bindings/net/adi,adin1110.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/adi,adin1110.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADI ADIN1110 MAC-PHY + +maintainers: + - Alexandru Tachici <alexandru.tachici@analog.com> + +description: | + The ADIN1110 is a low power single port 10BASE-T1L MAC- + PHY designed for industrial Ethernet applications. It integrates + an Ethernet PHY core with a MAC and all the associated analog + circuitry, input and output clock buffering. + + The ADIN2111 is a low power, low complexity, two-Ethernet ports + switch with integrated 10BASE-T1L PHYs and one serial peripheral + interface (SPI) port. The device is designed for industrial Ethernet + applications using low power constrained nodes and is compliant + with the IEEE 802.3cg-2019 Ethernet standard for long reach + 10 Mbps single pair Ethernet (SPE). + + The device has a 4-wire SPI interface for communication + between the MAC and host processor. + +allOf: + - $ref: ethernet-controller.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - adi,adin1110 + - adi,adin2111 + + reg: + maxItems: 1 + + adi,spi-crc: + description: | + Enable CRC8 checks on SPI read/writes. + type: boolean + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + + #address-cells = <1>; + #size-cells = <0>; + + ethernet@0 { + compatible = "adi,adin2111"; + reg = <0>; + spi-max-frequency = <24500000>; + + adi,spi-crc; + + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + + local-mac-address = [ 00 11 22 33 44 55 ]; + }; + }; diff --git a/Documentation/devicetree/bindings/net/altera_tse.txt b/Documentation/devicetree/bindings/net/altera_tse.txt deleted file mode 100644 index 1d9148ff5130..000000000000 --- a/Documentation/devicetree/bindings/net/altera_tse.txt +++ /dev/null @@ -1,113 +0,0 @@ -* Altera Triple-Speed Ethernet MAC driver (TSE) - -Required properties: -- compatible: Should be "altr,tse-1.0" for legacy SGDMA based TSE, and should - be "altr,tse-msgdma-1.0" for the preferred MSGDMA based TSE. - ALTR is supported for legacy device trees, but is deprecated. - altr should be used for all new designs. -- reg: Address and length of the register set for the device. It contains - the information of registers in the same order as described by reg-names -- reg-names: Should contain the reg names - "control_port": MAC configuration space region - "tx_csr": xDMA Tx dispatcher control and status space region - "tx_desc": MSGDMA Tx dispatcher descriptor space region - "rx_csr" : xDMA Rx dispatcher control and status space region - "rx_desc": MSGDMA Rx dispatcher descriptor space region - "rx_resp": MSGDMA Rx dispatcher response space region - "s1": SGDMA descriptor memory -- interrupts: Should contain the TSE interrupts and its mode. -- interrupt-names: Should contain the interrupt names - "rx_irq": xDMA Rx dispatcher interrupt - "tx_irq": xDMA Tx dispatcher interrupt -- rx-fifo-depth: MAC receive FIFO buffer depth in bytes -- tx-fifo-depth: MAC transmit FIFO buffer depth in bytes -- phy-mode: See ethernet.txt in the same directory. -- phy-handle: See ethernet.txt in the same directory. -- phy-addr: See ethernet.txt in the same directory. A configuration should - include phy-handle or phy-addr. -- altr,has-supplementary-unicast: - If present, TSE supports additional unicast addresses. - Otherwise additional unicast addresses are not supported. -- altr,has-hash-multicast-filter: - If present, TSE supports a hash based multicast filter. - Otherwise, hash-based multicast filtering is not supported. - -- mdio device tree subnode: When the TSE has a phy connected to its local - mdio, there must be device tree subnode with the following - required properties: - - - compatible: Must be "altr,tse-mdio". - - #address-cells: Must be <1>. - - #size-cells: Must be <0>. - - For each phy on the mdio bus, there must be a node with the following - fields: - - - reg: phy id used to communicate to phy. - - device_type: Must be "ethernet-phy". - -The MAC address will be determined using the optional properties defined in -ethernet.txt. - -Example: - - tse_sub_0_eth_tse_0: ethernet@1,00000000 { - compatible = "altr,tse-msgdma-1.0"; - reg = <0x00000001 0x00000000 0x00000400>, - <0x00000001 0x00000460 0x00000020>, - <0x00000001 0x00000480 0x00000020>, - <0x00000001 0x000004A0 0x00000008>, - <0x00000001 0x00000400 0x00000020>, - <0x00000001 0x00000420 0x00000020>; - reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc"; - interrupt-parent = <&hps_0_arm_gic_0>; - interrupts = <0 41 4>, <0 40 4>; - interrupt-names = "rx_irq", "tx_irq"; - rx-fifo-depth = <2048>; - tx-fifo-depth = <2048>; - address-bits = <48>; - max-frame-size = <1500>; - local-mac-address = [ 00 00 00 00 00 00 ]; - phy-mode = "gmii"; - altr,has-supplementary-unicast; - altr,has-hash-multicast-filter; - phy-handle = <&phy0>; - mdio { - compatible = "altr,tse-mdio"; - #address-cells = <1>; - #size-cells = <0>; - phy0: ethernet-phy@0 { - reg = <0x0>; - device_type = "ethernet-phy"; - }; - - phy1: ethernet-phy@1 { - reg = <0x1>; - device_type = "ethernet-phy"; - }; - - }; - }; - - tse_sub_1_eth_tse_0: ethernet@1,00001000 { - compatible = "altr,tse-msgdma-1.0"; - reg = <0x00000001 0x00001000 0x00000400>, - <0x00000001 0x00001460 0x00000020>, - <0x00000001 0x00001480 0x00000020>, - <0x00000001 0x000014A0 0x00000008>, - <0x00000001 0x00001400 0x00000020>, - <0x00000001 0x00001420 0x00000020>; - reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc"; - interrupt-parent = <&hps_0_arm_gic_0>; - interrupts = <0 43 4>, <0 42 4>; - interrupt-names = "rx_irq", "tx_irq"; - rx-fifo-depth = <2048>; - tx-fifo-depth = <2048>; - address-bits = <48>; - max-frame-size = <1500>; - local-mac-address = [ 00 00 00 00 00 00 ]; - phy-mode = "gmii"; - altr,has-supplementary-unicast; - altr,has-hash-multicast-filter; - phy-handle = <&phy1>; - }; diff --git a/Documentation/devicetree/bindings/net/altr,tse.yaml b/Documentation/devicetree/bindings/net/altr,tse.yaml new file mode 100644 index 000000000000..8d1d94494349 --- /dev/null +++ b/Documentation/devicetree/bindings/net/altr,tse.yaml @@ -0,0 +1,168 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/altr,tse.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera Triple Speed Ethernet MAC driver (TSE) + +maintainers: + - Maxime Chevallier <maxime.chevallier@bootlin.com> + +properties: + compatible: + oneOf: + - const: altr,tse-1.0 + - const: ALTR,tse-1.0 + deprecated: true + - const: altr,tse-msgdma-1.0 + + interrupts: + minItems: 2 + + interrupt-names: + items: + - const: rx_irq + - const: tx_irq + + rx-fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Depth in bytes of the RX FIFO + + tx-fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Depth in bytes of the TX FIFO + + altr,has-supplementary-unicast: + type: boolean + description: + If present, TSE supports additional unicast addresses. + + altr,has-hash-multicast-filter: + type: boolean + description: + If present, TSE supports hash based multicast filter. + + mdio: + $ref: mdio.yaml# + unevaluatedProperties: false + description: + Creates and registers an MDIO bus. + + properties: + compatible: + const: altr,tse-mdio + + required: + - compatible + +required: + - compatible + - reg + - interrupts + - rx-fifo-depth + - tx-fifo-depth + +allOf: + - $ref: "ethernet-controller.yaml#" + - if: + properties: + compatible: + contains: + enum: + - const: altr,tse-1.0 + - const: ALTR,tse-1.0 + then: + properties: + reg: + minItems: 4 + reg-names: + items: + - const: control_port + - const: rx_csr + - const: tx_csr + - const: s1 + + - if: + properties: + compatible: + contains: + enum: + - altr,tse-msgdma-1.0 + then: + properties: + reg: + minItems: 6 + maxItems: 7 + reg-names: + minItems: 6 + items: + - const: control_port + - const: rx_csr + - const: rx_desc + - const: rx_resp + - const: tx_csr + - const: tx_desc + - const: pcs + +unevaluatedProperties: false + +examples: + - | + tse_sub_0: ethernet@c0100000 { + compatible = "altr,tse-msgdma-1.0"; + reg = <0xc0100000 0x00000400>, + <0xc0101000 0x00000020>, + <0xc0102000 0x00000020>, + <0xc0103000 0x00000008>, + <0xc0104000 0x00000020>, + <0xc0105000 0x00000020>, + <0xc0106000 0x00000100>; + reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc", "pcs"; + interrupt-parent = <&intc>; + interrupts = <0 44 4>,<0 45 4>; + interrupt-names = "rx_irq","tx_irq"; + rx-fifo-depth = <2048>; + tx-fifo-depth = <2048>; + max-frame-size = <1500>; + local-mac-address = [ 00 00 00 00 00 00 ]; + altr,has-supplementary-unicast; + altr,has-hash-multicast-filter; + sfp = <&sfp0>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; + - | + tse_sub_1_eth_tse_0: ethernet@1,00001000 { + compatible = "altr,tse-msgdma-1.0"; + reg = <0x00001000 0x00000400>, + <0x00001460 0x00000020>, + <0x00001480 0x00000020>, + <0x000014A0 0x00000008>, + <0x00001400 0x00000020>, + <0x00001420 0x00000020>; + reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc"; + interrupt-parent = <&hps_0_arm_gic_0>; + interrupts = <0 43 4>, <0 42 4>; + interrupt-names = "rx_irq", "tx_irq"; + rx-fifo-depth = <2048>; + tx-fifo-depth = <2048>; + max-frame-size = <1500>; + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-mode = "gmii"; + altr,has-supplementary-unicast; + altr,has-hash-multicast-filter; + phy-handle = <&phy1>; + mdio { + compatible = "altr,tse-mdio"; + #address-cells = <1>; + #size-cells = <0>; + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml index 608e1d62bed5..ddd5a073c3a8 100644 --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic Meson DWMAC Ethernet controller maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> - Martin Blumenstingl <martin.blumenstingl@googlemail.com> # We need a select here so we don't match all nodes with 'snps,dwmac' diff --git a/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml b/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml index b1327c5b86cf..144a3785132c 100644 --- a/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml +++ b/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml @@ -30,8 +30,10 @@ properties: clocks: maxItems: 1 + power-domains: + maxItems: 1 + reg-io-width: - $ref: /schemas/types.yaml#/definitions/uint32 description: I/O register width (in bytes) implemented by this device default: 1 enum: [ 1, 2, 4 ] @@ -105,6 +107,7 @@ allOf: then: required: - clocks + - power-domains unevaluatedProperties: false @@ -129,4 +132,5 @@ examples: reg-io-width = <4>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; clocks = <&sysctrl R9A06G032_HCLK_CAN0>; + power-domains = <&sysctrl>; }; diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml index cc01b9b5752a..253b5d1407ee 100644 --- a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml +++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml @@ -37,6 +37,7 @@ properties: patternProperties: "^ethernet-port@[0-9]+$": type: object + unevaluatedProperties: false description: contains the resources for ethernet port allOf: - $ref: ethernet-controller.yaml# diff --git a/Documentation/devicetree/bindings/net/dsa/ar9331.txt b/Documentation/devicetree/bindings/net/dsa/ar9331.txt index 320607cbbb17..f824fdae0da2 100644 --- a/Documentation/devicetree/bindings/net/dsa/ar9331.txt +++ b/Documentation/devicetree/bindings/net/dsa/ar9331.txt @@ -76,7 +76,6 @@ eth1: ethernet@1a000000 { switch_port0: port@0 { reg = <0x0>; - label = "cpu"; ethernet = <ð1>; phy-mode = "gmii"; diff --git a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml index 3f01b65f3b22..259a0c6547f3 100644 --- a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml +++ b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml @@ -61,8 +61,9 @@ examples: }; ethernet-port@3 { reg = <3>; - label = "cpu"; ethernet = <&fec1>; + phy-mode = "rgmii-id"; + fixed-link { speed = <1000>; full-duplex; diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml index 23114d691d2a..1219b830b1a4 100644 --- a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml +++ b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml @@ -169,7 +169,6 @@ examples: port@8 { reg = <8>; - label = "cpu"; phy-mode = "rgmii-txid"; ethernet = <ð0>; fixed-link { @@ -252,8 +251,9 @@ examples: port@8 { ethernet = <&amac2>; - label = "cpu"; reg = <8>; + phy-mode = "internal"; + fixed-link { speed = <1000>; full-duplex; diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml index 09317e16cb5d..10ad7e71097b 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml @@ -76,6 +76,23 @@ properties: required: - reg +# CPU and DSA ports must have phylink-compatible link descriptions +if: + oneOf: + - required: [ ethernet ] + - required: [ link ] +then: + allOf: + - required: + - phy-mode + - oneOf: + - required: + - fixed-link + - required: + - phy-handle + - required: + - managed + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml index 228683773151..73b774eadd0b 100644 --- a/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml +++ b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml @@ -91,8 +91,13 @@ examples: port@0 { reg = <0>; - label = "cpu"; ethernet = <&gmac0>; + phy-mode = "mii"; + + fixed-link { + speed = <100>; + full-duplex; + }; }; port@2 { diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt index 464d6bf87605..46a732087f5c 100644 --- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt +++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt @@ -46,7 +46,6 @@ I2C managed mode: port@0 { /* RMII fixed link to master */ reg = <0>; - label = "cpu"; ethernet = <&master>; }; @@ -83,7 +82,6 @@ MDIO managed mode: port@0 { reg = <0>; - label = "cpu"; ethernet = <&master>; }; diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt index e3829d3e480e..8bb1eff21cb1 100644 --- a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt +++ b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt @@ -96,7 +96,6 @@ switch@e108000 { port@6 { reg = <0x6>; - label = "cpu"; ethernet = <ð0>; }; }; diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml index 17ab6c69ecc7..f2e9ff3f580b 100644 --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml @@ -4,67 +4,92 @@ $id: http://devicetree.org/schemas/net/dsa/mediatek,mt7530.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Mediatek MT7530 Ethernet switch +title: Mediatek MT7530 and MT7531 Ethernet Switches maintainers: - - Sean Wang <sean.wang@mediatek.com> + - Arınç ÜNAL <arinc.unal@arinc9.com> - Landen Chao <Landen.Chao@mediatek.com> - DENG Qingfang <dqfext@gmail.com> + - Sean Wang <sean.wang@mediatek.com> description: | - Port 5 of mt7530 and mt7621 switch is muxed between: - 1. GMAC5: GMAC5 can interface with another external MAC or PHY. - 2. PHY of port 0 or port 4: PHY interfaces with an external MAC like 2nd GMAC - of the SOC. Used in many setups where port 0/4 becomes the WAN port. - Note: On a MT7621 SOC with integrated switch: 2nd GMAC can only connected to - GMAC5 when the gpios for RGMII2 (GPIO 22-33) are not used and not - connected to external component! - - Port 5 modes/configurations: - 1. Port 5 is disabled and isolated: An external phy can interface to the 2nd - GMAC of the SOC. - In the case of a build-in MT7530 switch, port 5 shares the RGMII bus with 2nd - GMAC and an optional external phy. Mind the GPIO/pinctl settings of the SOC! - 2. Port 5 is muxed to PHY of port 0/4: Port 0/4 interfaces with 2nd GMAC. - It is a simple MAC to PHY interface, port 5 needs to be setup for xMII mode - and RGMII delay. - 3. Port 5 is muxed to GMAC5 and can interface to an external phy. - Port 5 becomes an extra switch port. - Only works on platform where external phy TX<->RX lines are swapped. - Like in the Ubiquiti ER-X-SFP. - 4. Port 5 is muxed to GMAC5 and interfaces with the 2nd GAMC as 2nd CPU port. - Currently a 2nd CPU port is not supported by DSA code. - - Depending on how the external PHY is wired: - 1. normal: The PHY can only connect to 2nd GMAC but not to the switch - 2. swapped: RGMII TX, RX are swapped; external phy interface with the switch as - a ethernet port. But can't interface to the 2nd GMAC. - - Based on the DT the port 5 mode is configured. - - Driver tries to lookup the phy-handle of the 2nd GMAC of the master device. - When phy-handle matches PHY of port 0 or 4 then port 5 set-up as mode 2. - phy-mode must be set, see also example 2 below! - * mt7621: phy-mode = "rgmii-txid"; - * mt7623: phy-mode = "rgmii"; - - CPU-Ports need a phy-mode property: - Allowed values on mt7530 and mt7621: - - "rgmii" - - "trgmii" - On mt7531: - - "1000base-x" - - "2500base-x" - - "rgmii" - - "sgmii" + There are two versions of MT7530, standalone and in a multi-chip module. + + MT7530 is a part of the multi-chip module in MT7620AN, MT7620DA, MT7620DAN, + MT7620NN, MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs. + + MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has got 10/100 PHYs + and the switch registers are directly mapped into SoC's memory map rather than + using MDIO. The DSA driver currently doesn't support this. + + There is only the standalone version of MT7531. + + Port 5 on MT7530 has got various ways of configuration. + + For standalone MT7530: + + - Port 5 can be used as a CPU port. + + - PHY 0 or 4 of the switch can be muxed to connect to the gmac of the SoC + which port 5 is wired to. Usually used for connecting the wan port + directly to the CPU to achieve 2 Gbps routing in total. + + The driver looks up the reg on the ethernet-phy node which the phy-handle + property refers to on the gmac node to mux the specified phy. + + The driver requires the gmac of the SoC to have "mediatek,eth-mac" as the + compatible string and the reg must be 1. So, for now, only gmac1 of an + MediaTek SoC can benefit this. Banana Pi BPI-R2 suits this. + Check out example 5 for a similar configuration. + + - Port 5 can be wired to an external phy. Port 5 becomes a DSA slave. + Check out example 7 for a similar configuration. + + For multi-chip module MT7530: + + - Port 5 can be used as a CPU port. + + - PHY 0 or 4 of the switch can be muxed to connect to gmac1 of the SoC. + Usually used for connecting the wan port directly to the CPU to achieve 2 + Gbps routing in total. + + The driver looks up the reg on the ethernet-phy node which the phy-handle + property refers to on the gmac node to mux the specified phy. + + For the MT7621 SoCs, rgmii2 group must be claimed with rgmii2 function. + Check out example 5. + + - In case of an external phy wired to gmac1 of the SoC, port 5 must not be + enabled. + + In case of muxing PHY 0 or 4, the external phy must not be enabled. + + For the MT7621 SoCs, rgmii2 group must be claimed with rgmii2 function. + Check out example 6. + - Port 5 can be muxed to an external phy. Port 5 becomes a DSA slave. + The external phy must be wired TX to TX to gmac1 of the SoC for this to + work. Ubiquiti EdgeRouter X SFP is wired this way. + + Muxing PHY 0 or 4 won't work when the external phy is connected TX to TX. + + For the MT7621 SoCs, rgmii2 group must be claimed with gpio function. + Check out example 7. properties: compatible: - enum: - - mediatek,mt7530 - - mediatek,mt7531 - - mediatek,mt7621 + oneOf: + - description: + Standalone MT7530 and multi-chip module MT7530 in MT7623AI SoC + const: mediatek,mt7530 + + - description: + Standalone MT7531 + const: mediatek,mt7531 + + - description: + Multi-chip module MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs + const: mediatek,mt7621 reg: maxItems: 1 @@ -79,7 +104,14 @@ properties: gpio-controller: type: boolean description: - if defined, MT7530's LED controller will run on GPIO mode. + If defined, LED controller of the MT7530 switch will run on GPIO mode. + + There are 15 controllable pins. + port 0 LED 0..2 as GPIO 0..2 + port 1 LED 0..2 as GPIO 3..5 + port 2 LED 0..2 as GPIO 6..8 + port 3 LED 0..2 as GPIO 9..11 + port 4 LED 0..2 as GPIO 12..14 "#interrupt-cells": const: 1 @@ -92,17 +124,21 @@ properties: io-supply: description: Phandle to the regulator node necessary for the I/O power. - See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt - for details for the regulator setup on these boards. + See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt for + details for the regulator setup on these boards. mediatek,mcm: type: boolean description: - if defined, indicates that either MT7530 is the part on multi-chip - module belong to MT7623A has or the remotely standalone chip as the - function MT7623N reference board provided for. + Used for MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs which the MT7530 + switch is a part of the multi-chip module. reset-gpios: + description: + GPIO to reset the switch. Use this if mediatek,mcm is not used. + This property is optional because some boards share the reset line with + other components which makes it impossible to probe the switch if the + reset line is used. maxItems: 1 reset-names: @@ -110,8 +146,8 @@ properties: resets: description: - Phandle pointing to the system reset controller with line index for - the ethsys. + Phandle pointing to the system reset controller with line index for the + ethsys. maxItems: 1 patternProperties: @@ -128,31 +164,88 @@ patternProperties: properties: reg: description: - Port address described must be 5 or 6 for CPU port and from 0 - to 5 for user ports. + Port address described must be 5 or 6 for CPU port and from 0 to 5 + for user ports. allOf: - $ref: dsa-port.yaml# - if: - properties: - label: - items: - - const: cpu + required: [ ethernet ] then: - required: - - reg - - phy-mode + properties: + reg: + enum: + - 5 + - 6 required: - compatible - reg +$defs: + mt7530-dsa-port: + patternProperties: + "^(ethernet-)?ports$": + patternProperties: + "^(ethernet-)?port@[0-9]+$": + if: + required: [ ethernet ] + then: + if: + properties: + reg: + const: 5 + then: + properties: + phy-mode: + enum: + - gmii + - mii + - rgmii + else: + properties: + phy-mode: + enum: + - rgmii + - trgmii + + mt7531-dsa-port: + patternProperties: + "^(ethernet-)?ports$": + patternProperties: + "^(ethernet-)?port@[0-9]+$": + if: + required: [ ethernet ] + then: + if: + properties: + reg: + const: 5 + then: + properties: + phy-mode: + enum: + - 1000base-x + - 2500base-x + - rgmii + - sgmii + else: + properties: + phy-mode: + enum: + - 1000base-x + - 2500base-x + - sgmii + allOf: - - $ref: "dsa.yaml#" + - $ref: dsa.yaml# - if: required: - mediatek,mcm then: + properties: + reset-gpios: false + required: - resets - reset-names @@ -163,52 +256,139 @@ allOf: - if: properties: compatible: - items: - - const: mediatek,mt7530 + const: mediatek,mt7530 then: + $ref: "#/$defs/mt7530-dsa-port" required: - core-supply - io-supply + - if: + properties: + compatible: + const: mediatek,mt7531 + then: + $ref: "#/$defs/mt7531-dsa-port" + properties: + gpio-controller: false + mediatek,mcm: false + + - if: + properties: + compatible: + const: mediatek,mt7621 + then: + $ref: "#/$defs/mt7530-dsa-port" + required: + - mediatek,mcm + unevaluatedProperties: false examples: + # Example 1: Standalone MT7530 - | #include <dt-bindings/gpio/gpio.h> + mdio { #address-cells = <1>; #size-cells = <0>; - switch@0 { + + switch@1f { compatible = "mediatek,mt7530"; - reg = <0>; + reg = <0x1f>; + + reset-gpios = <&pio 33 0>; core-supply = <&mt6323_vpa_reg>; io-supply = <&mt6323_vemc3v3_reg>; - reset-gpios = <&pio 33 GPIO_ACTIVE_HIGH>; ethernet-ports { #address-cells = <1>; #size-cells = <0>; + port@0 { reg = <0>; - label = "lan0"; + label = "lan1"; }; port@1 { reg = <1>; - label = "lan1"; + label = "lan2"; }; port@2 { reg = <2>; - label = "lan2"; + label = "lan3"; }; port@3 { reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; + + # Example 2: MT7530 in MT7623AI SoC + - | + #include <dt-bindings/reset/mt2701-resets.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@1f { + compatible = "mediatek,mt7530"; + reg = <0x1f>; + + mediatek,mcm; + resets = <ðsys MT2701_ETHSYS_MCM_RST>; + reset-names = "mcm"; + + core-supply = <&mt6323_vpa_reg>; + io-supply = <&mt6323_vemc3v3_reg>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; label = "lan3"; }; + port@3 { + reg = <3>; + label = "lan4"; + }; + port@4 { reg = <4>; label = "wan"; @@ -216,96 +396,226 @@ examples: port@6 { reg = <6>; - label = "cpu"; ethernet = <&gmac0>; phy-mode = "trgmii"; + fixed-link { speed = <1000>; full-duplex; + pause; }; }; }; }; }; + # Example 3: Standalone MT7531 - | - //Example 2: MT7621: Port 4 is WAN port: 2nd GMAC -> Port 5 -> PHY port 4. + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> - ethernet { + mdio { #address-cells = <1>; #size-cells = <0>; - gmac0: mac@0 { - compatible = "mediatek,eth-mac"; + + switch@0 { + compatible = "mediatek,mt7531"; reg = <0>; - phy-mode = "rgmii"; - fixed-link { - speed = <1000>; - full-duplex; - pause; + reset-gpios = <&pio 54 0>; + + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; + }; + }; + + # Example 4: MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs + - | + #include <dt-bindings/interrupt-controller/mips-gic.h> + #include <dt-bindings/reset/mt7621-reset.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@1f { + compatible = "mediatek,mt7621"; + reg = <0x1f>; + + mediatek,mcm; + resets = <&sysc MT7621_RST_MCM>; + reset-names = "mcm"; + + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; }; }; + }; - gmac1: mac@1 { + # Example 5: MT7621: mux MT7530's phy4 to SoC's gmac1 + - | + #include <dt-bindings/interrupt-controller/mips-gic.h> + #include <dt-bindings/reset/mt7621-reset.h> + + ethernet { + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&rgmii2_pins>; + + mac@1 { compatible = "mediatek,eth-mac"; reg = <1>; - phy-mode = "rgmii-txid"; - phy-handle = <&phy4>; + + phy-mode = "rgmii"; + phy-handle = <&example5_ethphy4>; }; - mdio: mdio-bus { + mdio { #address-cells = <1>; #size-cells = <0>; - /* Internal phy */ - phy4: ethernet-phy@4 { + /* MT7530's phy4 */ + example5_ethphy4: ethernet-phy@4 { reg = <4>; }; - mt7530: switch@1f { + switch@1f { compatible = "mediatek,mt7621"; reg = <0x1f>; - mediatek,mcm; - resets = <&rstctrl 2>; + mediatek,mcm; + resets = <&sysc MT7621_RST_MCM>; reset-names = "mcm"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>; + ethernet-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; - label = "lan0"; + label = "lan1"; }; port@1 { reg = <1>; - label = "lan1"; + label = "lan2"; }; port@2 { reg = <2>; - label = "lan2"; + label = "lan3"; }; port@3 { reg = <3>; - label = "lan3"; + label = "lan4"; }; - /* Commented out. Port 4 is handled by 2nd GMAC. + /* Commented out, phy4 is muxed to gmac1. port@4 { reg = <4>; - label = "lan4"; + label = "wan"; }; */ port@6 { reg = <6>; - label = "cpu"; ethernet = <&gmac0>; - phy-mode = "rgmii"; + phy-mode = "trgmii"; fixed-link { speed = <1000>; @@ -318,82 +628,169 @@ examples: }; }; + # Example 6: MT7621: mux external phy to SoC's gmac1 - | - //Example 3: MT7621: Port 5 is connected to external PHY: Port 5 -> external PHY. + #include <dt-bindings/interrupt-controller/mips-gic.h> + #include <dt-bindings/reset/mt7621-reset.h> ethernet { #address-cells = <1>; #size-cells = <0>; - gmac_0: mac@0 { + + pinctrl-names = "default"; + pinctrl-0 = <&rgmii2_pins>; + + mac@1 { compatible = "mediatek,eth-mac"; - reg = <0>; + reg = <1>; + phy-mode = "rgmii"; + phy-handle = <&example6_ethphy7>; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; - fixed-link { - speed = <1000>; - full-duplex; - pause; + /* External PHY */ + example6_ethphy7: ethernet-phy@7 { + reg = <7>; + phy-mode = "rgmii"; + }; + + switch@1f { + compatible = "mediatek,mt7621"; + reg = <0x1f>; + + mediatek,mcm; + resets = <&sysc MT7621_RST_MCM>; + reset-names = "mcm"; + + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; }; }; + }; + + # Example 7: MT7621: mux external phy to MT7530's port 5 + - | + #include <dt-bindings/interrupt-controller/mips-gic.h> + #include <dt-bindings/reset/mt7621-reset.h> + + ethernet { + #address-cells = <1>; + #size-cells = <0>; - mdio0: mdio-bus { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii2_pins>; + + mdio { #address-cells = <1>; #size-cells = <0>; - /* External phy */ - ephy5: ethernet-phy@7 { + /* External PHY */ + example7_ethphy7: ethernet-phy@7 { reg = <7>; + phy-mode = "rgmii"; }; switch@1f { compatible = "mediatek,mt7621"; reg = <0x1f>; - mediatek,mcm; - resets = <&rstctrl 2>; + mediatek,mcm; + resets = <&sysc MT7621_RST_MCM>; reset-names = "mcm"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>; + ethernet-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; - label = "lan0"; + label = "lan1"; }; port@1 { reg = <1>; - label = "lan1"; + label = "lan2"; }; port@2 { reg = <2>; - label = "lan2"; + label = "lan3"; }; port@3 { reg = <3>; - label = "lan3"; + label = "lan4"; }; port@4 { reg = <4>; - label = "lan4"; + label = "wan"; }; port@5 { reg = <5>; - label = "lan5"; - phy-mode = "rgmii"; - phy-handle = <&ephy5>; + label = "extphy"; + phy-mode = "rgmii-txid"; + phy-handle = <&example7_ethphy7>; }; - cpu_port0: port@6 { + port@6 { reg = <6>; - label = "cpu"; - ethernet = <&gmac_0>; - phy-mode = "rgmii"; + ethernet = <&gmac0>; + phy-mode = "trgmii"; fixed-link { speed = <1000>; diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml index 6bbd8145b6c1..4da75b1f9533 100644 --- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml @@ -107,8 +107,9 @@ examples: }; port@5 { reg = <5>; - label = "cpu"; ethernet = <ð0>; + phy-mode = "rgmii"; + fixed-link { speed = <1000>; full-duplex; @@ -144,8 +145,9 @@ examples: }; port@6 { reg = <6>; - label = "cpu"; ethernet = <ð0>; + phy-mode = "rgmii"; + fixed-link { speed = <1000>; full-duplex; diff --git a/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml b/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml new file mode 100644 index 000000000000..8d93ed9c172c --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml @@ -0,0 +1,260 @@ +# SPDX-License-Identifier: (GPL-2.0 OR MIT) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/mscc,ocelot.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Ocelot Switch Family Device Tree Bindings + +maintainers: + - Vladimir Oltean <vladimir.oltean@nxp.com> + - Claudiu Manoil <claudiu.manoil@nxp.com> + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - UNGLinuxDriver@microchip.com + +description: | + There are multiple switches which are either part of the Ocelot-1 family, or + derivatives of this architecture. These switches can be found embedded in + various SoCs and accessed using MMIO, or as discrete chips and accessed over + SPI or PCIe. The present DSA binding shall be used when the host controlling + them performs packet I/O primarily through an Ethernet port of the switch + (which is attached to an Ethernet port of the host), rather than through + Frame DMA or register-based I/O. + + VSC9953 (Seville): + + This is found in the NXP T1040, where it is a memory-mapped platform + device. + + The following PHY interface types are supported: + + - phy-mode = "internal": on ports 8 and 9 + - phy-mode = "sgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7 + - phy-mode = "qsgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7 + - phy-mode = "1000base-x": on ports 0, 1, 2, 3, 4, 5, 6, 7 + + VSC9959 (Felix): + + This is found in the NXP LS1028A. It is a PCI device, part of the larger + enetc root complex. As a result, the ethernet-switch node is a sub-node of + the PCIe root complex node and its "reg" property conforms to the parent + node bindings, describing it as PF 5 of device 0, bus 0. + + If any external switch port is enabled, the enetc PF2 (enetc_port2) should + be enabled as well. This is because the internal MDIO bus (exposed through + EA BAR 0) used to access the MAC PCS registers truly belongs to the enetc + port 2 and not to Felix. + + The following PHY interface types are supported: + + - phy-mode = "internal": on ports 4 and 5 + - phy-mode = "sgmii": on ports 0, 1, 2, 3 + - phy-mode = "qsgmii": on ports 0, 1, 2, 3 + - phy-mode = "usxgmii": on ports 0, 1, 2, 3 + - phy-mode = "1000base-x": on ports 0, 1, 2, 3 + - phy-mode = "2500base-x": on ports 0, 1, 2, 3 + +properties: + compatible: + enum: + - mscc,vsc9953-switch + - pci1957,eef0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + description: + Used to signal availability of PTP TX timestamps, and state changes of + the MAC merge layer of ports that support Frame Preemption. + + little-endian: true + big-endian: true + +required: + - compatible + - reg + +allOf: + - $ref: dsa.yaml# + - if: + properties: + compatible: + const: pci1957,eef0 + then: + required: + - interrupts + +unevaluatedProperties: false + +examples: + # Felix VSC9959 (NXP LS1028A) + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pcie { /* Integrated Endpoint Root Complex */ + #address-cells = <3>; + #size-cells = <2>; + + ethernet-switch@0,5 { + compatible = "pci1957,eef0"; + reg = <0x000500 0 0 0 0>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-mode = "qsgmii"; + phy-handle = <&phy0>; + managed = "in-band-status"; + }; + + port@1 { + reg = <1>; + phy-mode = "qsgmii"; + phy-handle = <&phy1>; + managed = "in-band-status"; + }; + + port@2 { + reg = <2>; + phy-mode = "qsgmii"; + phy-handle = <&phy2>; + managed = "in-band-status"; + }; + + port@3 { + reg = <3>; + phy-mode = "qsgmii"; + phy-handle = <&phy3>; + managed = "in-band-status"; + }; + + port@4 { + reg = <4>; + ethernet = <&enetc_port2>; + phy-mode = "internal"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + port@5 { + reg = <5>; + ethernet = <&enetc_port3>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; + # Seville VSC9953 (NXP T1040) + - | + soc { + #address-cells = <1>; + #size-cells = <1>; + + ethernet-switch@800000 { + compatible = "mscc,vsc9953-switch"; + reg = <0x800000 0x290000>; + little-endian; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-mode = "qsgmii"; + phy-handle = <&phy0>; + managed = "in-band-status"; + }; + + port@1 { + reg = <1>; + phy-mode = "qsgmii"; + phy-handle = <&phy1>; + managed = "in-band-status"; + }; + + port@2 { + reg = <2>; + phy-mode = "qsgmii"; + phy-handle = <&phy2>; + managed = "in-band-status"; + }; + + port@3 { + reg = <3>; + phy-mode = "qsgmii"; + phy-handle = <&phy3>; + managed = "in-band-status"; + }; + + port@4 { + reg = <4>; + phy-mode = "qsgmii"; + phy-handle = <&phy4>; + managed = "in-band-status"; + }; + + port@5 { + reg = <5>; + phy-mode = "qsgmii"; + phy-handle = <&phy5>; + managed = "in-band-status"; + }; + + port@6 { + reg = <6>; + phy-mode = "qsgmii"; + phy-handle = <&phy6>; + managed = "in-band-status"; + }; + + port@7 { + reg = <7>; + phy-mode = "qsgmii"; + phy-handle = <&phy7>; + managed = "in-band-status"; + }; + + port@8 { + reg = <8>; + phy-mode = "internal"; + ethernet = <&enet0>; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + port@9 { + reg = <9>; + phy-mode = "internal"; + ethernet = <&enet1>; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/ocelot.txt b/Documentation/devicetree/bindings/net/dsa/ocelot.txt deleted file mode 100644 index 7a271d070b72..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/ocelot.txt +++ /dev/null @@ -1,213 +0,0 @@ -Microchip Ocelot switch driver family -===================================== - -Felix ------ - -Currently the switches supported by the felix driver are: - -- VSC9959 (Felix) -- VSC9953 (Seville) - -The VSC9959 switch is found in the NXP LS1028A. It is a PCI device, part of the -larger ENETC root complex. As a result, the ethernet-switch node is a sub-node -of the PCIe root complex node and its "reg" property conforms to the parent -node bindings: - -* reg: Specifies PCIe Device Number and Function Number of the endpoint device, - in this case for the Ethernet L2Switch it is PF5 (of device 0, bus 0). - -It does not require a "compatible" string. - -The interrupt line is used to signal availability of PTP TX timestamps and for -TSN frame preemption. - -For the external switch ports, depending on board configuration, "phy-mode" and -"phy-handle" are populated by board specific device tree instances. Ports 4 and -5 are fixed as internal ports in the NXP LS1028A instantiation. - -The CPU port property ("ethernet") configures the feature called "NPI port" in -the Ocelot hardware core. The CPU port in Ocelot is a set of queues, which are -connected, in the Node Processor Interface (NPI) mode, to an Ethernet port. -By default, in fsl-ls1028a.dtsi, the NPI port is assigned to the internal -2.5Gbps port@4, but can be moved to the 1Gbps port@5, depending on the specific -use case. Moving the NPI port to an external switch port is hardware possible, -but there is no platform support for the Linux system on the LS1028A chip to -operate as an entire slave DSA chip. NPI functionality (and therefore DSA -tagging) is supported on a single port at a time. - -Any port can be disabled (and in fsl-ls1028a.dtsi, they are indeed all disabled -by default, and should be enabled on a per-board basis). But if any external -switch port is enabled at all, the ENETC PF2 (enetc_port2) should be enabled as -well, regardless of whether it is configured as the DSA master or not. This is -because the Felix PHYLINK implementation accesses the MAC PCS registers, which -in hardware truly belong to the ENETC port #2 and not to Felix. - -Supported PHY interface types (appropriate SerDes protocol setting changes are -needed in the RCW binary): - -* phy_mode = "internal": on ports 4 and 5 -* phy_mode = "sgmii": on ports 0, 1, 2, 3 -* phy_mode = "qsgmii": on ports 0, 1, 2, 3 -* phy_mode = "usxgmii": on ports 0, 1, 2, 3 -* phy_mode = "2500base-x": on ports 0, 1, 2, 3 - -For the rest of the device tree binding definitions, which are standard DSA and -PCI, refer to the following documents: - -Documentation/devicetree/bindings/net/dsa/dsa.txt -Documentation/devicetree/bindings/pci/pci.txt - -Example: - -&soc { - pcie@1f0000000 { /* Integrated Endpoint Root Complex */ - ethernet-switch@0,5 { - reg = <0x000500 0 0 0 0>; - /* IEP INT_B */ - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* External ports */ - port@0 { - reg = <0>; - label = "swp0"; - }; - - port@1 { - reg = <1>; - label = "swp1"; - }; - - port@2 { - reg = <2>; - label = "swp2"; - }; - - port@3 { - reg = <3>; - label = "swp3"; - }; - - /* Tagging CPU port */ - port@4 { - reg = <4>; - ethernet = <&enetc_port2>; - phy-mode = "internal"; - - fixed-link { - speed = <2500>; - full-duplex; - }; - }; - - /* Non-tagging CPU port */ - port@5 { - reg = <5>; - phy-mode = "internal"; - status = "disabled"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - }; -}; - -The VSC9953 switch is found inside NXP T1040. It is a platform device with the -following required properties: - -- compatible: - Must be "mscc,vsc9953-switch". - -Supported PHY interface types (appropriate SerDes protocol setting changes are -needed in the RCW binary): - -* phy_mode = "internal": on ports 8 and 9 -* phy_mode = "sgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7 -* phy_mode = "qsgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7 - -Example: - -&soc { - ethernet-switch@800000 { - #address-cells = <0x1>; - #size-cells = <0x0>; - compatible = "mscc,vsc9953-switch"; - little-endian; - reg = <0x800000 0x290000>; - - ports { - #address-cells = <0x1>; - #size-cells = <0x0>; - - port@0 { - reg = <0x0>; - label = "swp0"; - }; - - port@1 { - reg = <0x1>; - label = "swp1"; - }; - - port@2 { - reg = <0x2>; - label = "swp2"; - }; - - port@3 { - reg = <0x3>; - label = "swp3"; - }; - - port@4 { - reg = <0x4>; - label = "swp4"; - }; - - port@5 { - reg = <0x5>; - label = "swp5"; - }; - - port@6 { - reg = <0x6>; - label = "swp6"; - }; - - port@7 { - reg = <0x7>; - label = "swp7"; - }; - - port@8 { - reg = <0x8>; - phy-mode = "internal"; - ethernet = <&enet0>; - - fixed-link { - speed = <2500>; - full-duplex; - }; - }; - - port@9 { - reg = <0x9>; - phy-mode = "internal"; - status = "disabled"; - - fixed-link { - speed = <2500>; - full-duplex; - }; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml index f3c88371d76c..978162df51f7 100644 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml @@ -159,7 +159,6 @@ examples: port@0 { reg = <0>; - label = "cpu"; ethernet = <&gmac1>; phy-mode = "rgmii"; @@ -221,7 +220,6 @@ examples: port@0 { reg = <0>; - label = "cpu"; ethernet = <&gmac1>; phy-mode = "rgmii"; @@ -268,7 +266,6 @@ examples: port@6 { reg = <0>; - label = "cpu"; ethernet = <&gmac1>; phy-mode = "sgmii"; diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml index 4f99aff029dc..1a7d45a8ad66 100644 --- a/Documentation/devicetree/bindings/net/dsa/realtek.yaml +++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml @@ -189,7 +189,6 @@ examples: }; port@5 { reg = <5>; - label = "cpu"; ethernet = <&gmac0>; phy-mode = "rgmii"; fixed-link { @@ -277,7 +276,6 @@ examples: }; port@6 { reg = <6>; - label = "cpu"; ethernet = <&fec1>; phy-mode = "rgmii"; tx-internal-delay-ps = <2000>; diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml index 4d428f5ad044..7ca9c19a157c 100644 --- a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml +++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml @@ -130,7 +130,8 @@ examples: port@4 { reg = <4>; ethernet = <&gmac2>; - label = "cpu"; + phy-mode = "internal"; + fixed-link { speed = <1000>; full-duplex; diff --git a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt index bbf4a13f6d75..258bef483673 100644 --- a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt +++ b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt @@ -75,7 +75,6 @@ switch@0 { }; vsc: port@6 { reg = <6>; - label = "cpu"; ethernet = <&gmac1>; phy-mode = "rgmii"; fixed-link { @@ -117,7 +116,6 @@ switch@2,0 { }; vsc: port@6 { reg = <6>; - label = "cpu"; ethernet = <&enet0>; phy-mode = "rgmii"; fixed-link { diff --git a/Documentation/devicetree/bindings/net/engleder,tsnep.yaml b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml index d0e1476e15b5..5bd964a46a9d 100644 --- a/Documentation/devicetree/bindings/net/engleder,tsnep.yaml +++ b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml @@ -20,7 +20,26 @@ properties: maxItems: 1 interrupts: - maxItems: 1 + minItems: 1 + maxItems: 8 + + interrupt-names: + minItems: 1 + items: + - const: mac + - const: txrx-1 + - const: txrx-2 + - const: txrx-3 + - const: txrx-4 + - const: txrx-5 + - const: txrx-6 + - const: txrx-7 + description: + The main interrupt for basic MAC features and the first TX/RX queue pair + is named "mac". "txrx-[1-7]" are the interrupts for additional TX/RX + queue pairs. + + dma-coherent: true local-mac-address: true @@ -58,7 +77,7 @@ examples: axi { #address-cells = <2>; #size-cells = <2>; - tnsep0: ethernet@a0000000 { + tsnep0: ethernet@a0000000 { compatible = "engleder,tsnep"; reg = <0x0 0xa0000000 0x0 0x10000>; interrupts = <0 89 1>; @@ -76,4 +95,24 @@ examples: }; }; }; + + tsnep1: ethernet@a0010000 { + compatible = "engleder,tsnep"; + reg = <0x0 0xa0010000 0x0 0x10000>; + interrupts = <0 93 1>, <0 94 1>, <0 95 1>, <0 96 1>; + interrupt-names = "mac", "txrx-1", "txrx-2", "txrx-3"; + interrupt-parent = <&gic>; + local-mac-address = [00 00 00 00 00 00]; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + mdio { + #address-cells = <1>; + #size-cells = <0>; + suppress-preamble; + phy1: ethernet-phy@1 { + reg = <1>; + rxc-skew-ps = <1080>; + }; + }; + }; }; diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index c138a1022879..4b3c590fcebf 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -67,6 +67,7 @@ properties: - gmii - sgmii - qsgmii + - qusgmii - tbi - rev-mii - rmii diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index ed1415a4381f..ad808e9ce5b9 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -144,6 +144,12 @@ properties: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. + pses: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + description: + Specifies a reference to a node representing a Power Sourcing Equipment. + phy-is-integrated: $ref: /schemas/types.yaml#/definitions/flag description: diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml index 5cfb661be124..e0f376f7e274 100644 --- a/Documentation/devicetree/bindings/net/fsl,fec.yaml +++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml @@ -21,6 +21,7 @@ properties: - fsl,imx28-fec - fsl,imx6q-fec - fsl,mvf600-fec + - fsl,s32v234-fec - items: - enum: - fsl,imx53-fec diff --git a/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml new file mode 100644 index 000000000000..3a35ac1c260d --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,fman-dtsec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP FMan MAC + +maintainers: + - Madalin Bucur <madalin.bucur@nxp.com> + +description: | + Each FMan has several MACs, each implementing an Ethernet interface. Earlier + versions of FMan used the Datapath Three Speed Ethernet Controller (dTSEC) for + 10/100/1000 MBit/s speeds, and the 10-Gigabit Ethernet Media Access Controller + (10GEC) for 10 Gbit/s speeds. Later versions of FMan use the Multirate + Ethernet Media Access Controller (mEMAC) to handle all speeds. + +properties: + compatible: + enum: + - fsl,fman-dtsec + - fsl,fman-xgec + - fsl,fman-memac + + cell-index: + maximum: 64 + description: | + FManV2: + register[bit] MAC cell-index + ============================================================ + FM_EPI[16] XGEC 8 + FM_EPI[16+n] dTSECn n-1 + FM_NPI[11+n] dTSECn n-1 + n = 1,..,5 + + FManV3: + register[bit] MAC cell-index + ============================================================ + FM_EPI[16+n] mEMACn n-1 + FM_EPI[25] mEMAC10 9 + + FM_NPI[11+n] mEMACn n-1 + FM_NPI[10] mEMAC10 9 + FM_NPI[11] mEMAC9 8 + n = 1,..8 + + FM_EPI and FM_NPI are located in the FMan memory map. + + 2. SoC registers: + + - P2041, P3041, P4080 P5020, P5040: + register[bit] FMan MAC cell + Unit index + ============================================================ + DCFG_DEVDISR2[7] 1 XGEC 8 + DCFG_DEVDISR2[7+n] 1 dTSECn n-1 + DCFG_DEVDISR2[15] 2 XGEC 8 + DCFG_DEVDISR2[15+n] 2 dTSECn n-1 + n = 1,..5 + + - T1040, T2080, T4240, B4860: + register[bit] FMan MAC cell + Unit index + ============================================================ + DCFG_CCSR_DEVDISR2[n-1] 1 mEMACn n-1 + DCFG_CCSR_DEVDISR2[11+n] 2 mEMACn n-1 + n = 1,..6,9,10 + + EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in + the specific SoC "Device Configuration/Pin Control" Memory + Map. + + reg: + maxItems: 1 + + fsl,fman-ports: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 2 + description: | + An array of two references: the first is the FMan RX port and the second + is the TX port used by this MAC. + + ptp-timer: + $ref: /schemas/types.yaml#/definitions/phandle + description: A reference to the IEEE1588 timer + + pcsphy-handle: + $ref: /schemas/types.yaml#/definitions/phandle + description: A reference to the PCS (typically found on the SerDes) + + tbi-handle: + $ref: /schemas/types.yaml#/definitions/phandle + description: A reference to the (TBI-based) PCS + +required: + - compatible + - cell-index + - reg + - fsl,fman-ports + - ptp-timer + +allOf: + - $ref: ethernet-controller.yaml# + - if: + properties: + compatible: + contains: + const: fsl,fman-dtsec + then: + required: + - tbi-handle + - if: + properties: + compatible: + contains: + const: fsl,fman-memac + then: + required: + - pcsphy-handle + +unevaluatedProperties: false + +examples: + - | + ethernet@e0000 { + compatible = "fsl,fman-dtsec"; + cell-index = <0>; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman1_rx8 &fman1_tx28>; + ptp-timer = <&ptp_timer>; + tbi-handle = <&tbi0>; + }; + - | + ethernet@e8000 { + cell-index = <4>; + compatible = "fsl,fman-memac"; + reg = <0xe8000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy4>; + phy-handle = <&sgmii_phy1>; + phy-connection-type = "sgmii"; + }; +... diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt index 801efc7d6818..b9055335db3b 100644 --- a/Documentation/devicetree/bindings/net/fsl-fman.txt +++ b/Documentation/devicetree/bindings/net/fsl-fman.txt @@ -232,133 +232,7 @@ port@81000 { ============================================================================= FMan dTSEC/XGEC/mEMAC Node -DESCRIPTION - -mEMAC/dTSEC/XGEC are the Ethernet network interfaces - -PROPERTIES - -- compatible - Usage: required - Value type: <stringlist> - Definition: A standard property. - Must include one of the following: - - "fsl,fman-dtsec" for dTSEC MAC - - "fsl,fman-xgec" for XGEC MAC - - "fsl,fman-memac" for mEMAC MAC - -- cell-index - Usage: required - Value type: <u32> - Definition: Specifies the MAC id. - - The cell-index value may be used by the FMan or the SoC, to - identify the MAC unit in the FMan (or SoC) memory map. - In the tables below there's a description of the cell-index - use, there are two tables, one describes the use of cell-index - by the FMan, the second describes the use by the SoC: - - 1. FMan Registers - - FManV2: - register[bit] MAC cell-index - ============================================================ - FM_EPI[16] XGEC 8 - FM_EPI[16+n] dTSECn n-1 - FM_NPI[11+n] dTSECn n-1 - n = 1,..,5 - - FManV3: - register[bit] MAC cell-index - ============================================================ - FM_EPI[16+n] mEMACn n-1 - FM_EPI[25] mEMAC10 9 - - FM_NPI[11+n] mEMACn n-1 - FM_NPI[10] mEMAC10 9 - FM_NPI[11] mEMAC9 8 - n = 1,..8 - - FM_EPI and FM_NPI are located in the FMan memory map. - - 2. SoC registers: - - - P2041, P3041, P4080 P5020, P5040: - register[bit] FMan MAC cell - Unit index - ============================================================ - DCFG_DEVDISR2[7] 1 XGEC 8 - DCFG_DEVDISR2[7+n] 1 dTSECn n-1 - DCFG_DEVDISR2[15] 2 XGEC 8 - DCFG_DEVDISR2[15+n] 2 dTSECn n-1 - n = 1,..5 - - - T1040, T2080, T4240, B4860: - register[bit] FMan MAC cell - Unit index - ============================================================ - DCFG_CCSR_DEVDISR2[n-1] 1 mEMACn n-1 - DCFG_CCSR_DEVDISR2[11+n] 2 mEMACn n-1 - n = 1,..6,9,10 - - EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in - the specific SoC "Device Configuration/Pin Control" Memory - Map. - -- reg - Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. - -- fsl,fman-ports - Usage: required - Value type: <prop-encoded-array> - Definition: An array of two phandles - the first references is - the FMan RX port and the second is the TX port used by this - MAC. - -- ptp-timer - Usage required - Value type: <phandle> - Definition: A phandle for 1EEE1588 timer. - -- pcsphy-handle - Usage required for "fsl,fman-memac" MACs - Value type: <phandle> - Definition: A phandle for pcsphy. - -- tbi-handle - Usage required for "fsl,fman-dtsec" MACs - Value type: <phandle> - Definition: A phandle for tbiphy. - -EXAMPLE - -fman1_tx28: port@a8000 { - cell-index = <0x28>; - compatible = "fsl,fman-v2-port-tx"; - reg = <0xa8000 0x1000>; -}; - -fman1_rx8: port@88000 { - cell-index = <0x8>; - compatible = "fsl,fman-v2-port-rx"; - reg = <0x88000 0x1000>; -}; - -ptp-timer: ptp_timer@fe000 { - compatible = "fsl,fman-ptp-timer"; - reg = <0xfe000 0x1000>; -}; - -ethernet@e0000 { - compatible = "fsl,fman-dtsec"; - cell-index = <0>; - reg = <0xe0000 0x1000>; - fsl,fman-ports = <&fman1_rx8 &fman1_tx28>; - ptp-timer = <&ptp-timer>; - tbi-handle = <&tbi0>; -}; +Refer to Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml ============================================================================ FMan IEEE 1588 Node diff --git a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt deleted file mode 100644 index 358fed2fab43..000000000000 --- a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt +++ /dev/null @@ -1,24 +0,0 @@ -Mediatek Gigabit Switch -======================= - -The mediatek gigabit switch can be found on Mediatek SoCs (mt7620, mt7621). - -Required properties: -- compatible: Should be "mediatek,mt7620-gsw" or "mediatek,mt7621-gsw" -- reg: Address and length of the register set for the device -- interrupts: Should contain the gigabit switches interrupt -- resets: Should contain the gigabit switches resets -- reset-names: Should contain the reset names "gsw" - -Example: - -gsw@10110000 { - compatible = "ralink,mt7620-gsw"; - reg = <0x10110000 8000>; - - resets = <&rstctrl 23>; - reset-names = "gsw"; - - interrupt-parent = <&intc>; - interrupts = <17>; -}; diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml index f5564ecddb62..7ef696204c5a 100644 --- a/Documentation/devicetree/bindings/net/mediatek,net.yaml +++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml @@ -69,6 +69,15 @@ properties: A list of phandle to the syscon node that handles the SGMII setup which is required for those SoCs equipped with SGMII. + mediatek,wed: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 2 + maxItems: 2 + items: + maxItems: 1 + description: + List of phandles to wireless ethernet dispatch nodes. + dma-coherent: true mdio-bus: @@ -112,6 +121,8 @@ allOf: Phandle to the syscon node that handles the ports slew rate and driver current. + mediatek,wed: false + - if: properties: compatible: @@ -144,15 +155,6 @@ allOf: minItems: 1 maxItems: 1 - mediatek,wed: - $ref: /schemas/types.yaml#/definitions/phandle-array - minItems: 2 - maxItems: 2 - items: - maxItems: 1 - description: - List of phandles to wireless ethernet dispatch nodes. - mediatek,pcie-mirror: $ref: /schemas/types.yaml#/definitions/phandle description: @@ -202,6 +204,8 @@ allOf: minItems: 2 maxItems: 2 + mediatek,wed: false + - if: properties: compatible: @@ -238,6 +242,11 @@ allOf: minItems: 2 maxItems: 2 + mediatek,wed-pcie: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the mediatek wed-pcie controller. + patternProperties: "^mac@[0-1]$": type: object diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml index 61b2fb9e141b..0fa2132fa4f4 100644 --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml @@ -19,6 +19,7 @@ select: contains: enum: - mediatek,mt2712-gmac + - mediatek,mt8188-gmac - mediatek,mt8195-gmac required: - compatible @@ -37,6 +38,11 @@ properties: - enum: - mediatek,mt8195-gmac - const: snps,dwmac-5.10a + - items: + - enum: + - mediatek,mt8188-gmac + - const: mediatek,mt8195-gmac + - const: snps,dwmac-5.10a clocks: minItems: 5 @@ -74,7 +80,7 @@ properties: or will round down. Range 0~31*170. For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550, or will round down. Range 0~31*550. - For MT8195 RGMII/RMII/MII interface, Allowed value need to be a multiple of 290, + For MT8188/MT8195 RGMII/RMII/MII interface, Allowed value need to be a multiple of 290, or will round down. Range 0~31*290. mediatek,rx-delay-ps: @@ -84,7 +90,7 @@ properties: or will round down. Range 0~31*170. For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550, or will round down. Range 0~31*550. - For MT8195 RGMII/RMII/MII interface, Allowed value need to be a multiple + For MT8188/MT8195 RGMII/RMII/MII interface, Allowed value need to be a multiple of 290, or will round down. Range 0~31*290. mediatek,rmii-rxc: diff --git a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml index 6c86d3d85e99..57ffeb8fc876 100644 --- a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml +++ b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml @@ -74,16 +74,20 @@ properties: ethernet-ports: type: object + additionalProperties: false + + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + patternProperties: "^port@[0-9a-f]+$": - type: object + $ref: /schemas/net/ethernet-controller.yaml# + unevaluatedProperties: false properties: - '#address-cells': - const: 1 - '#size-cells': - const: 0 - reg: description: Switch port number @@ -93,29 +97,11 @@ properties: phandle of a Ethernet SerDes PHY. This defines which SerDes instance will handle the Ethernet traffic. - phy-mode: - description: - This specifies the interface used by the Ethernet SerDes towards - the PHY or SFP. - microchip,bandwidth: description: Specifies bandwidth in Mbit/s allocated to the port. $ref: "/schemas/types.yaml#/definitions/uint32" maximum: 25000 - phy-handle: - description: - phandle of a Ethernet PHY. This is optional and if provided it - points to the cuPHY used by the Ethernet SerDes. - - sfp: - description: - phandle of an SFP. This is optional and used when not specifying - a cuPHY. It points to the SFP node that describes the SFP used by - the Ethernet SerDes. - - managed: true - microchip,sd-sgpio: description: Index of the ports Signal Detect SGPIO in the set of 384 SGPIOs @@ -144,8 +130,6 @@ required: - reg-names - interrupts - interrupt-names - - resets - - reset-names - ethernet-ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml index a191a04e681c..308485a8ee6c 100644 --- a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml +++ b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml @@ -128,7 +128,7 @@ examples: i2c-int-rising; - reset-n-io = <&gpio3 19 GPIO_ACTIVE_HIGH>; + reset-n-io = <&gpio3 19 GPIO_ACTIVE_LOW>; }; }; @@ -151,7 +151,7 @@ examples: interrupt-parent = <&gpio1>; interrupts = <17 IRQ_TYPE_EDGE_RISING>; - reset-n-io = <&gpio3 19 GPIO_ACTIVE_HIGH>; + reset-n-io = <&gpio3 19 GPIO_ACTIVE_LOW>; }; }; @@ -162,7 +162,7 @@ examples: nfc { compatible = "marvell,nfc-uart"; - reset-n-io = <&gpio3 16 GPIO_ACTIVE_HIGH>; + reset-n-io = <&gpio3 16 GPIO_ACTIVE_LOW>; hci-muxed; flow-control; diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml index d51da24f3505..ab8867e6939b 100644 --- a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml +++ b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml @@ -31,6 +31,22 @@ patternProperties: description: The ID number for the child PHY. Should be +1 of parent PHY. + nxp,rmii-refclk-in: + type: boolean + description: | + The REF_CLK is provided for both transmitted and received data + in RMII mode. This clock signal is provided by the PHY and is + typically derived from an external 25MHz crystal. Alternatively, + a 50MHz clock signal generated by an external oscillator can be + connected to pin REF_CLK. A third option is to connect a 25MHz + clock to pin CLK_IN_OUT. So, the REF_CLK should be configured + as input or output according to the actual circuit connection. + If present, indicates that the REF_CLK will be configured as + interface reference clock input when RMII mode enabled. + If not present, the REF_CLK will be configured as interface + reference clock output when RMII mode enabled. + Only supported on TJA1100 and TJA1101. + required: - reg @@ -44,6 +60,7 @@ examples: tja1101_phy0: ethernet-phy@4 { reg = <0x4>; + nxp,rmii-refclk-in; }; }; - | diff --git a/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml b/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml new file mode 100644 index 000000000000..c6b1c188abf7 --- /dev/null +++ b/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pse-pd/podl-pse-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Regulator based Power Sourcing Equipment + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +description: Regulator based PoDL PSE controller. The device must be referenced + by the PHY node to control power injection to the Ethernet cable. + +allOf: + - $ref: "pse-controller.yaml#" + +properties: + compatible: + const: podl-pse-regulator + + '#pse-cells': + const: 0 + + pse-supply: + description: Power supply for the PSE controller + +additionalProperties: false + +required: + - compatible + - pse-supply + +examples: + - | + ethernet-pse { + compatible = "podl-pse-regulator"; + pse-supply = <®_t1l1>; + #pse-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml new file mode 100644 index 000000000000..b110abb42597 --- /dev/null +++ b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pse-pd/pse-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Power Sourcing Equipment (PSE). + +description: Binding for the Power Sourcing Equipment (PSE) as defined in the + IEEE 802.3 specification. It is designed for hardware which is delivering + power over twisted pair/ethernet cable. The ethernet-pse nodes should be + used to describe PSE controller and referenced by the ethernet-phy node. + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +properties: + $nodename: + pattern: "^ethernet-pse(@.*)?$" + + "#pse-cells": + description: + Used to uniquely identify a PSE instance within an IC. Will be + 0 on PSE nodes with only a single output and at least 1 on nodes + controlling several outputs. + enum: [0, 1] + +required: + - "#pse-cells" + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml index b3d4013b7ca6..161d28919316 100644 --- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml +++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml @@ -40,6 +40,14 @@ properties: Only supported on the AR8031. type: boolean + qca,disable-hibernation-mode: + description: | + Disable Atheros AR803X PHYs hibernation mode. If present, indicates + that the hardware of PHY will not enter power saving mode when the + cable is disconnected. And the RX_CLK always keeps outputting a + valid clock. + type: boolean + qca,smarteee-tw-us-100m: description: EEE Tw parameter for 100M links. $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt deleted file mode 100644 index 9fe1a0a22e44..000000000000 --- a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt +++ /dev/null @@ -1,59 +0,0 @@ -Ralink Frame Engine Ethernet controller -======================================= - -The Ralink frame engine ethernet controller can be found on Ralink and -Mediatek SoCs (RT288x, RT3x5x, RT366x, RT388x, rt5350, mt7620, mt7621, mt76x8). - -Depending on the SoC, there is a number of ports connected to the CPU port -directly and/or via a (gigabit-)switch. - -* Ethernet controller node - -Required properties: -- compatible: Should be one of "ralink,rt2880-eth", "ralink,rt3050-eth", - "ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth", - "mediatek,mt7620-eth", "mediatek,mt7621-eth" -- reg: Address and length of the register set for the device -- interrupts: Should contain the frame engines interrupt -- resets: Should contain the frame engines resets -- reset-names: Should contain the reset names "fe". If a switch is present - "esw" is also required. - - -* Ethernet port node - -Required properties: -- compatible: Should be "ralink,eth-port" -- reg: The number of the physical port -- phy-handle: reference to the node describing the phy - -Example: - -mdio-bus { - ... - phy0: ethernet-phy@0 { - phy-mode = "mii"; - reg = <0>; - }; -}; - -ethernet@400000 { - compatible = "ralink,rt2880-eth"; - reg = <0x00400000 10000>; - - #address-cells = <1>; - #size-cells = <0>; - - resets = <&rstctrl 18>; - reset-names = "fe"; - - interrupt-parent = <&cpuintc>; - interrupts = <5>; - - port@0 { - compatible = "ralink,eth-port"; - reg = <0>; - phy-handle = <&phy0>; - }; - -}; diff --git a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt deleted file mode 100644 index 87e315856efa..000000000000 --- a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt +++ /dev/null @@ -1,30 +0,0 @@ -Ralink Fast Ethernet Embedded Switch -==================================== - -The ralink fast ethernet embedded switch can be found on Ralink and Mediatek -SoCs (RT3x5x, RT5350, MT76x8). - -Required properties: -- compatible: Should be "ralink,rt3050-esw" -- reg: Address and length of the register set for the device -- interrupts: Should contain the embedded switches interrupt -- resets: Should contain the embedded switches resets -- reset-names: Should contain the reset names "esw" - -Optional properties: -- ralink,portmap: can be used to choose if the default switch setup is - llllw or wllll -- ralink,led_polarity: override the active high/low settings of the leds - -Example: - -esw@10110000 { - compatible = "ralink,rt3050-esw"; - reg = <0x10110000 8000>; - - resets = <&rstctrl 23>; - reset-names = "esw"; - - interrupt-parent = <&intc>; - interrupts = <17>; -}; diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml index acf347f3cdbe..3f41294f5997 100644 --- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml @@ -40,11 +40,16 @@ properties: - renesas,etheravb-r8a77980 # R-Car V3H - renesas,etheravb-r8a77990 # R-Car E3 - renesas,etheravb-r8a77995 # R-Car D3 - - renesas,etheravb-r8a779a0 # R-Car V3U - const: renesas,etheravb-rcar-gen3 # R-Car Gen3 and RZ/G2 - items: - enum: + - renesas,etheravb-r8a779a0 # R-Car V3U + - renesas,etheravb-r8a779g0 # R-Car V4H + - const: renesas,etheravb-rcar-gen4 # R-Car Gen4 + + - items: + - enum: - renesas,etheravb-r9a09g011 # RZ/V2M - const: renesas,etheravb-rzv2m # RZ/V2M compatible @@ -207,7 +212,7 @@ allOf: - renesas,etheravb-r8a77965 - renesas,etheravb-r8a77970 - renesas,etheravb-r8a77980 - - renesas,etheravb-r8a779a0 + - renesas,etheravb-rcar-gen4 then: required: - tx-internal-delay-ps diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml index 083623c8d718..42fb72b6909d 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml @@ -25,7 +25,9 @@ select: - rockchip,rk3368-gmac - rockchip,rk3399-gmac - rockchip,rk3568-gmac + - rockchip,rk3588-gmac - rockchip,rv1108-gmac + - rockchip,rv1126-gmac required: - compatible @@ -47,9 +49,11 @@ properties: - rockchip,rk3368-gmac - rockchip,rk3399-gmac - rockchip,rv1108-gmac + - rockchip,rv1126-gmac - items: - enum: - rockchip,rk3568-gmac + - rockchip,rk3588-gmac - const: snps,dwmac-4.20a clocks: @@ -81,6 +85,11 @@ properties: description: The phandle of the syscon node for the general register file. $ref: /schemas/types.yaml#/definitions/phandle + rockchip,php-grf: + description: + The phandle of the syscon node for the peripheral general register file. + $ref: /schemas/types.yaml#/definitions/phandle + tx_delay: description: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default. $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 491597c02edf..f94a0a4320f1 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -74,6 +74,7 @@ properties: - rockchip,rk3328-gmac - rockchip,rk3366-gmac - rockchip,rk3368-gmac + - rockchip,rk3588-gmac - rockchip,rk3399-gmac - rockchip,rv1108-gmac - snps,dwmac @@ -288,6 +289,11 @@ properties: is supported. For example, this is used in case of SGMII and MAC2MAC connection. + snps,clk-csr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Frequency division factor for MDC clock. + mdio: $ref: mdio.yaml# unevaluatedProperties: false @@ -301,6 +307,60 @@ properties: required: - compatible + stmmac-axi-config: + type: object + unevaluatedProperties: false + description: + AXI BUS Mode parameters. + + properties: + snps,lpi_en: + $ref: /schemas/types.yaml#/definitions/flag + description: + enable Low Power Interface + + snps,xit_frm: + $ref: /schemas/types.yaml#/definitions/flag + description: + unlock on WoL + + snps,wr_osr_lmt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + max write outstanding req. limit + + snps,rd_osr_lmt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + max read outstanding req. limit + + snps,kbbe: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + do not cross 1KiB boundary. + + snps,blen: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + this is a vector of supported burst length. + minItems: 7 + maxItems: 7 + + snps,fb: + $ref: /schemas/types.yaml#/definitions/flag + description: + fixed-burst + + snps,mb: + $ref: /schemas/types.yaml#/definitions/flag + description: + mixed-burst + + snps,rb: + $ref: /schemas/types.yaml#/definitions/flag + description: + rebuild INCRx Burst + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml b/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml index 62dffee27c3d..8e51dcdb4796 100644 --- a/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml +++ b/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml @@ -32,6 +32,7 @@ properties: ethernet-ports: type: object + additionalProperties: false description: Ethernet ports to PHY properties: @@ -44,6 +45,7 @@ properties: patternProperties: "^port@[0-1]$": type: object + additionalProperties: false description: Port to PHY properties: diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index 31bf825c6598..46e330f45768 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -77,6 +77,8 @@ properties: ethernet-ports: type: object + additionalProperties: false + properties: '#address-cells': const: 1 @@ -89,6 +91,7 @@ properties: description: CPSW external ports $ref: ethernet-controller.yaml# + unevaluatedProperties: false properties: reg: @@ -117,6 +120,7 @@ properties: cpts: type: object + unevaluatedProperties: false description: The Common Platform Time Sync (CPTS) module diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index b8281d8be940..7d90beaccc60 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -55,6 +55,7 @@ properties: compatible: enum: - ti,am654-cpsw-nuss + - ti,j7200-cpswxg-nuss - ti,j721e-cpsw-nuss - ti,am642-cpsw-nuss @@ -110,16 +111,17 @@ properties: const: 0 patternProperties: - port@[1-2]: + "^port@[1-4]$": type: object description: CPSWxG NUSS external ports $ref: ethernet-controller.yaml# + unevaluatedProperties: false properties: reg: minimum: 1 - maximum: 2 + maximum: 4 description: CPSW port number phys: @@ -178,6 +180,19 @@ required: - '#address-cells' - '#size-cells' +allOf: + - if: + not: + properties: + compatible: + contains: + const: ti,j7200-cpswxg-nuss + then: + properties: + ethernet-ports: + patternProperties: + "^port@[3-4]$": false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml index b783ad0d1f53..e9f78cef6b7f 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml @@ -95,6 +95,7 @@ properties: refclk-mux: type: object + additionalProperties: false description: CPTS reference clock multiplexer clock properties: '#clock-cells': diff --git a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml index 8156a9aeb589..304757bf9281 100644 --- a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml +++ b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml @@ -7,7 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: The Vertexcom MSE102x (SPI) Device Tree Bindings maintainers: - - Stefan Wahren <stefan.wahren@in-tech.com> + - Stefan Wahren <stefan.wahren@chargebyte.com> description: Vertexcom's MSE102x are a family of HomePlug GreenPHY chips. diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml index 53b4153d9bfc..fec1cc9b9a08 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Broadcom BCM4329 family fullmac wireless SDIO devices +title: Broadcom BCM4329 family fullmac wireless SDIO/PCIE devices maintainers: - Arend van Spriel <arend@broadcom.com> @@ -41,11 +41,17 @@ properties: - cypress,cyw4373-fmac - cypress,cyw43012-fmac - const: brcm,bcm4329-fmac - - const: brcm,bcm4329-fmac + - enum: + - brcm,bcm4329-fmac + - pci14e4,43dc # BCM4355 + - pci14e4,4464 # BCM4364 + - pci14e4,4488 # BCM4377 + - pci14e4,4425 # BCM4378 + - pci14e4,4433 # BCM4387 reg: - description: SDIO function number for the device, for most cases - this will be 1. + description: SDIO function number for the device (for most cases + this will be 1) or PCI device identifier. interrupts: maxItems: 1 @@ -85,6 +91,31 @@ properties: takes precedence. type: boolean + brcm,cal-blob: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: A per-device calibration blob for the Wi-Fi radio. This + should be filled in by the bootloader from platform configuration + data, if necessary, and will be uploaded to the device if present. + + brcm,board-type: + $ref: /schemas/types.yaml#/definitions/string + description: Overrides the board type, which is normally the compatible of + the root node. This can be used to decouple the overall system board or + device name from the board type for WiFi purposes, which is used to + construct firmware and NVRAM configuration filenames, allowing for + multiple devices that share the same module or characteristics for the + WiFi subsystem to share the same firmware/NVRAM files. On Apple platforms, + this should be the Apple module-instance codename prefixed by "apple,", + e.g. "apple,honshu". + + apple,antenna-sku: + $ref: /schemas/types.yaml#/definitions/string + description: Antenna SKU used to identify a specific antenna configuration + on Apple platforms. This is use to build firmware filenames, to allow + platforms with different antenna configs to have different firmware and/or + NVRAM. This would normally be filled in by the bootloader from platform + configuration data. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml index 60de78f1bc7b..b3405f284580 100644 --- a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml +++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml @@ -20,8 +20,6 @@ properties: reg: true - spi-max-frequency: true - interrupts: maxItems: 1 @@ -51,7 +49,10 @@ required: - compatible - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml index a677b056f112..f7cf135aa37f 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -66,6 +66,18 @@ properties: required: - iommus + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: State bits used by the AP to signal the WLAN Q6. + items: + - description: Signal bits used to enable/disable low power mode + on WCN6750 in the case of WoW (Wake on Wireless). + + qcom,smem-state-names: + description: The names of the state bits used for SMP2P output. + items: + - const: wlan-smp2p-out + required: - compatible - reg @@ -448,6 +460,8 @@ examples: <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>; qcom,rproc = <&remoteproc_wpss>; memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>; + qcom,smem-states = <&wlan_smp2p_out 0>; + qcom,smem-state-names = "wlan-smp2p-out"; wifi-firmware { iommus = <&apps_smmu 0x1c02 0x1>; }; diff --git a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml index 76199a67d628..b35d2f3ad1ad 100644 --- a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml +++ b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml @@ -29,12 +29,6 @@ description: > Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml for more information. - For SPI: - - In add of the properties below, please consult - Documentation/devicetree/bindings/spi/spi-controller.yaml for optional SPI - related properties. - properties: compatible: items: @@ -52,8 +46,6 @@ properties: bindings. maxItems: 1 - spi-max-frequency: true - interrupts: description: The interrupt line. Should be IRQ_TYPE_EDGE_RISING. When SPI is used, this property is required. When SDIO is used, the "in-band" @@ -84,12 +76,15 @@ properties: mac-address: true -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml index d68bb2ec1f7e..e31456730e9f 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml @@ -36,8 +36,6 @@ properties: This is required when connected via SPI, and optional when connected via SDIO. - spi-max-frequency: true - interrupts: minItems: 1 maxItems: 2 @@ -69,20 +67,22 @@ required: - compatible - interrupts -if: - properties: - compatible: - contains: - enum: - - ti,wl1271 - - ti,wl1273 - - ti,wl1281 - - ti,wl1283 -then: - required: - - ref-clock-frequency - -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + contains: + enum: + - ti,wl1271 + - ti,wl1273 + - ti,wl1281 + - ti,wl1283 + then: + required: + - ref-clock-frequency + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml index 59663e897dae..a202b6c6561d 100644 --- a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml +++ b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml @@ -40,6 +40,7 @@ properties: patternProperties: '^opp-?[0-9]+$': type: object + additionalProperties: false properties: opp-hz: true diff --git a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml index 14a7a689ad6d..df8442fb11f0 100644 --- a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml +++ b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml @@ -19,6 +19,7 @@ properties: patternProperties: '^opp-?[0-9]+$': type: object + additionalProperties: false properties: opp-level: true diff --git a/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml index be485f500887..5eddaed3d853 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic AXG MIPI D-PHY maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml index 399ebde45409..f3a5fbabbbb5 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic G12A USB2 PHY maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml index 453c083cf44c..868b4e6fde71 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic G12A USB3 + PCIE Combo PHY maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml index eea2e02678ed..83fe4b39b56f 100644 --- a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml @@ -28,12 +28,15 @@ properties: - const: hdmi_phy clocks: - maxItems: 2 + minItems: 2 + maxItems: 3 clock-names: + minItems: 2 items: - const: iface - const: ref + - const: xo power-domains: maxItems: 1 @@ -44,6 +47,9 @@ properties: vddio-supply: description: phandle to VDD I/O supply regulator + '#clock-cells': + const: 0 + '#phy-cells': const: 0 @@ -75,9 +81,12 @@ examples: "hdmi_phy"; clocks = <&mmcc 116>, - <&gcc 214>; + <&gcc 214>, + <&xo_board>; clock-names = "iface", - "ref"; + "ref", + "xo"; + #clock-cells = <0>; #phy-cells = <0>; vddio-supply = <&vreg_l12a_1p8>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml index 33d1d37fdf6d..624e14f00790 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml @@ -8,7 +8,6 @@ title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) Low Power Island (LPI) TLMM block maintainers: - - Srinivasa Rao Mandadapu <srivasam@codeaurora.org> - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> description: | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml index 2d228164357c..2bd60c49a442 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SC7280 TLMM block maintainers: - - Rajendra Nayak <rnayak@codeaurora.org> + - Bjorn Andersson <andersson@kernel.org> description: | This binding describes the Top Level Mode Multiplexer block found in the diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml index 5390e988a934..43a932237a92 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml +++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic Meson Everything-Else Power Domains maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> description: |+ The Everything-Else Power Domains node should be the child of a syscon diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml index 24ace6e1e5ec..63e1161a87de 100644 --- a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml +++ b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml @@ -83,6 +83,7 @@ properties: regulators: type: object + additionalProperties: false description: | List of regulators provided by the device diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml index f7e3d8fd3bf3..6c3371d706bb 100644 --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml @@ -85,6 +85,9 @@ properties: - current default: voltage + vin-supply: + description: Input supply phandle. + required: - compatible - regulator-name diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml index 236348c4710c..71138c611b6c 100644 --- a/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml +++ b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml @@ -79,6 +79,7 @@ patternProperties: patternProperties: regulator-state-(standby|mem|disk): type: object + additionalProperties: true properties: regulator-mode: false diff --git a/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml b/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml index 4321f061a7f6..2b266ea43716 100644 --- a/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml +++ b/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml @@ -111,6 +111,7 @@ properties: regulators: type: object + additionalProperties: false description: List of child nodes that specify the regulators. diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml new file mode 100644 index 000000000000..771cc134393c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml @@ -0,0 +1,273 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mediatek,mt6331-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MT6331 Regulator from MediaTek Integrated + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + +description: | + The MT6331 PMIC provides 6 BUCK and 21 LDO (Low Dropout) regulators + and nodes are named according to the regulator type: + buck-<name> and ldo-<name>. + MT6331 regulators node should be sub node of the MT6397 MFD node. + +patternProperties: + "^buck-v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$" + + unevaluatedProperties: false + + "^ldo-v(avdd32aud|auxa32)$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^v(avdd32aud|auxa32)$" + + unevaluatedProperties: false + + "^ldo-v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$" + + unevaluatedProperties: false + + "^ldo-vcam(a|af|d|io)$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^vcam(a|af|d|io)$" + + unevaluatedProperties: false + + "^ldo-vtcxo[12]$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^vtcxo[12]$" + + required: + - regulator-name + + unevaluatedProperties: false + + "^ldo-vgp[1234]$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^vgp[12]$" + + required: + - regulator-name + + unevaluatedProperties: false + +additionalProperties: false + +examples: + - | + pmic { + regulators { + mt6331_vdvfs11_reg: buck-vdvfs11 { + regulator-name = "vdvfs11"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1493750>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <1>; + regulator-allowed-modes = <0 1>; + }; + mt6331_vdvfs12_reg: buck-vdvfs12 { + regulator-name = "vdvfs12"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1493750>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <1>; + regulator-allowed-modes = <0 1>; + }; + mt6331_vdvfs13_reg: buck-vdvfs13 { + regulator-name = "vdvfs13"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1493750>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <1>; + regulator-allowed-modes = <0 1>; + }; + mt6331_vdvfs14_reg: buck-vdvfs14 { + regulator-name = "vdvfs14"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1493750>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <1>; + regulator-allowed-modes = <0 1>; + }; + mt6331_vcore2_reg: buck-vcore2 { + regulator-name = "vcore2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1493750>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <1>; + regulator-allowed-modes = <0 1>; + }; + mt6331_vio18_reg: buck-vio18 { + regulator-name = "vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-allowed-modes = <0 1>; + }; + mt6331_vtcxo1_reg: ldo-vtcxo1 { + regulator-name = "vtcxo1"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + mt6331_vtcxo2_reg: ldo-vtcxo2 { + regulator-name = "vtcxo2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + mt6331_avdd32_aud_reg: ldo-avdd32aud { + regulator-name = "avdd32_aud"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3200000>; + }; + mt6331_vauxa32_reg: ldo-vauxa32 { + regulator-name = "vauxa32"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3200000>; + }; + mt6331_vcama_reg: ldo-vcama { + regulator-name = "vcama"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + mt6331_vio28_reg: ldo-vio28 { + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + mt6331_vcamaf_reg: ldo-vcamaf { + regulator-name = "vcam_af"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + mt6331_vmc_reg: ldo-vmc { + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + mt6331_vmch_reg: ldo-vmch { + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + mt6331_vemc33_reg: ldo-vemc33 { + regulator-name = "vemc33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + mt6331_vgp1_reg: ldo-vgp1 { + regulator-name = "vgp1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + mt6331_vsim1_reg: ldo-vsim1 { + regulator-name = "vsim1"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + }; + mt6331_vsim2_reg: ldo-vsim2 { + regulator-name = "vsim2"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + }; + mt6331_vmipi_reg: ldo-vmipi { + regulator-name = "vmipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + mt6331_vibr_reg: ldo-vibr { + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + mt6331_vgp4_reg: ldo-vgp4 { + regulator-name = "vgp4"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <2200000>; + }; + mt6331_vcamd_reg: ldo-vcamd { + regulator-name = "vcamd"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1500000>; + }; + mt6331_vusb10_reg: ldo-vusb10 { + regulator-name = "vusb"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + }; + mt6331_vcamio_reg: ldo-vcamio { + regulator-name = "vcam_io"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + }; + mt6331_vsram_reg: ldo-vsram { + regulator-name = "vsram"; + regulator-min-microvolt = <1012500>; + regulator-max-microvolt = <1012500>; + regulator-always-on; + regulator-boot-on; + }; + mt6331_vgp2_reg: ldo-vgp2 { + regulator-name = "vgp2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + }; + mt6331_vgp3_reg: ldo-vgp3 { + regulator-name = "vgp3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + }; + mt6331_vrtc_reg: ldo-vrtc { + regulator-name = "vrtc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + mt6331_vdig18_reg: ldo-vdig18 { + regulator-name = "dvdd18_dig"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml new file mode 100644 index 000000000000..3218f43e6957 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mediatek,mt6332-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MT6332 Regulator from MediaTek Integrated + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + +description: | + The MT6332 Companion PMIC provides 6 BUCK and 4 LDO (Low Dropout) + regulators and nodes are named according to the regulator type: + buck-<name> and ldo-<name>. + MT6332 regulators node should be sub node of the MT6397 MFD node. + +patternProperties: + "^buck-v(dram|dvfs2|pa|rf18a|rf18b|sbst)$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^v(dram|dvfs2|pa|rf18a|rf18b|sbst)$" + + unevaluatedProperties: false + + "^ldo-v(bif28|dig18|sram|usb33)$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^v(bif28|dig18|sram|usb33)$" + + unevaluatedProperties: false + +additionalProperties: false + +examples: + - | + pmic { + regulators { + mt6332_vdram_reg: buck-vdram { + regulator-name = "vdram"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1493750>; + regulator-ramp-delay = <12500>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + }; + mt6332_vdvfs2_reg: buck-vdvfs2 { + regulator-name = "vdvfs2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <1>; + regulator-allowed-modes = <0 1>; + }; + mt6332_vpa_reg: buck-vpa { + regulator-name = "vpa"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + mt6332_vrf18a_reg: buck-vrf18a { + regulator-name = "vrf18a"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <2240625>; + regulator-allowed-modes = <0 1>; + }; + mt6332_vrf18b_reg: buck-vrf18b { + regulator-name = "vrf18b"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <2240625>; + regulator-allowed-modes = <0 1>; + }; + mt6332_vsbst_reg: buck-vsbst { + regulator-name = "vsbst"; + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <7468750>; + }; + mt6332_vauxb32_reg: ldo-vauxb32 { + regulator-name = "vauxb32"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3200000>; + }; + mt6332_vbif28_reg: ldo-vbif28 { + regulator-name = "vbif28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + mt6332_vdig18_reg: ldo-vdig18 { + regulator-name = "vdig18"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + mt6332_vsram_reg: ldo-vsram { + regulator-name = "vauxa32"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1493750>; + regulator-always-on; + }; + mt6332_vusb33_reg: ldo-vusb33 { + regulator-name = "vusb33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml index 37402c370fbb..364b58730be2 100644 --- a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml @@ -29,6 +29,7 @@ properties: "^vbuck[1-4]$": type: object $ref: "regulator.yaml#" + unevaluatedProperties: false properties: regulator-compatible: diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml index 9a36bee750af..90c3bda31c23 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml @@ -37,6 +37,8 @@ description: | For PM6150, smps1 - smps5, ldo1 - ldo19 For PM6150L, smps1 - smps8, ldo1 - ldo11, bob For PM6350, smps1 - smps5, ldo1 - ldo22 + For PM660, smps1 - smps6, ldo1 - ldo3, ldo5 - ldo19 + For PM660L, smps1 - smps3, smps5, ldo1 - ldo8, bob For PM7325, smps1 - smps8, ldo1 - ldo19 For PM8005, smps1 - smps4 For PM8009, smps1 - smps2, ldo1 - ldo7 @@ -57,6 +59,8 @@ properties: - qcom,pm6150-rpmh-regulators - qcom,pm6150l-rpmh-regulators - qcom,pm6350-rpmh-regulators + - qcom,pm660-rpmh-regulators + - qcom,pm660l-rpmh-regulators - qcom,pm7325-rpmh-regulators - qcom,pm8005-rpmh-regulators - qcom,pm8009-rpmh-regulators @@ -99,12 +103,16 @@ properties: type: object $ref: "regulator.yaml#" description: BOB regulator node. + dependencies: + regulator-allow-set-load: ["regulator-allowed-modes"] patternProperties: "^(smps|ldo|lvs)[0-9]+$": type: object $ref: "regulator.yaml#" description: smps/ldo regulator nodes(s). + dependencies: + regulator-allow-set-load: ["regulator-allowed-modes"] required: - compatible @@ -148,6 +156,38 @@ allOf: properties: compatible: enum: + - qcom,pm660-rpmh-regulators + then: + properties: + vdd-l1-l6-l7-supply: true + vdd-l2-l3-supply: true + vdd-l5-supply: true + vdd-l8-l9-l10-l11-l12-l13-l14-supply: true + vdd-l15-l16-l17-l18-l19-supply: true + patternProperties: + "^vdd-s[1-6]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm660l-rpmh-regulators + then: + properties: + vdd-bob-supply: + description: BOB regulator parent supply phandle. + vdd-l1-l9-l10-supply: true + vdd-l2-supply: true + vdd-l3-l5-l7-l8-supply: true + vdd-l4-l6-supply: true + vdd-s3-s4-supply: true + patternProperties: + "^vdd-s[125]-supply$": true + + - if: + properties: + compatible: + enum: - qcom,pm7325-rpmh-regulators then: properties: diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml index c233461cc980..961eed51912c 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml @@ -24,6 +24,17 @@ description: For mp5496, s2 + For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22 + + For pm6125 s1, s2, s3, s4, s5, s6, s7, s8, l1, l2, l3, l5, l6, l7, l8, l9, + l10, l22, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24 + + For pm660, s1, s2, s3, s4, s5, s6, l1, l2, l3, l5, l6, l7, l8, l9, l10, l22, + l12, l13, l14, l15, l16, l17, l18, l19 + + For pm660l s1, s2, s3, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, bob + For pm8226, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1 @@ -52,11 +63,6 @@ description: l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2 - For pm660, s1, s2, s3, s4, s5, s6, l1, l2, l3, l5, l6, l7, l8, l9, l10, l22, - l12, l13, l14, l15, l16, l17, l18, l19 - - For pm660l s1, s2, s3, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, bob - For pma8084, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1 @@ -68,9 +74,6 @@ description: For pms405, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13 - For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, - l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22 - maintainers: - Andy Gross <agross@kernel.org> - Bjorn Andersson <bjorn.andersson@linaro.org> @@ -79,6 +82,10 @@ properties: compatible: enum: - qcom,rpm-mp5496-regulators + - qcom,rpm-pm2250-regulators + - qcom,rpm-pm6125-regulators + - qcom,rpm-pm660-regulators + - qcom,rpm-pm660l-regulators - qcom,rpm-pm8226-regulators - qcom,rpm-pm8841-regulators - qcom,rpm-pm8909-regulators @@ -88,13 +95,10 @@ properties: - qcom,rpm-pm8953-regulators - qcom,rpm-pm8994-regulators - qcom,rpm-pm8998-regulators - - qcom,rpm-pm660-regulators - - qcom,rpm-pm660l-regulators - qcom,rpm-pma8084-regulators - qcom,rpm-pmi8994-regulators - qcom,rpm-pmi8998-regulators - qcom,rpm-pms405-regulators - - qcom,rpm-pm2250-regulators patternProperties: ".*-supply$": diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml index 8b7c4af4b551..bdf34c2de96b 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml @@ -12,6 +12,7 @@ maintainers: properties: compatible: enum: + - qcom,pm6125-regulators - qcom,pm660-regulators - qcom,pm660l-regulators - qcom,pm8004-regulators @@ -35,6 +36,7 @@ patternProperties: description: List of regulators and its properties type: object $ref: regulator.yaml# + unevaluatedProperties: false properties: qcom,ocp-max-retries: @@ -100,8 +102,6 @@ patternProperties: SAW controlled gang leader. Will be configured as SAW regulator. type: boolean - unevaluatedProperties: false - required: - compatible @@ -111,6 +111,25 @@ allOf: compatible: contains: enum: + - qcom,pm6125-regulators + then: + properties: + vdd_l1_l7_l17_l18-supply: true + vdd_l2_l3_l4-supply: true + vdd_l5_l15_l19_l20_l21_l22-supply: true + vdd_l6_l8-supply: true + vdd_l9_l11-supply: true + vdd_l10_l13_l14-supply: true + vdd_l12_l16-supply: true + vdd_l23_l24-supply: true + patternProperties: + "^vdd_s[1-8]-supply$": true + + - if: + properties: + compatible: + contains: + enum: - qcom,pm660-regulators then: properties: @@ -121,6 +140,7 @@ allOf: vdd_l8_l9_l10_l11_l12_l13_l14-supply: true patternProperties: "^vdd_s[1-6]-supply$": true + - if: properties: compatible: @@ -135,6 +155,7 @@ allOf: vdd_l4_l6-supply: true patternProperties: "^vdd_s[1-5]-supply$": true + - if: properties: compatible: @@ -144,6 +165,7 @@ allOf: then: patternProperties: "^vdd_s[25]-supply$": true + - if: properties: compatible: @@ -153,6 +175,7 @@ allOf: then: patternProperties: "^vdd_s[1-4]-supply$": true + - if: properties: compatible: @@ -172,6 +195,7 @@ allOf: vdd_lvs1-supply: true patternProperties: "^vdd_s[1-5]-supply$": true + - if: properties: compatible: @@ -181,6 +205,7 @@ allOf: then: patternProperties: "^vdd_s[1-8]-supply$": true + - if: properties: compatible: @@ -196,6 +221,7 @@ allOf: patternProperties: "^vdd_l[27]-supply$": true "^vdd_s[1-4]-supply$": true + - if: properties: compatible: @@ -224,6 +250,7 @@ allOf: vin_5vs-supply: true patternProperties: "^vdd_s[1-3]-supply$": true + - if: properties: compatible: @@ -242,6 +269,7 @@ allOf: vdd_l9_l10_l13_l14_l15_l18-supply: true patternProperties: "^vdd_s[1-6]-supply$": true + - if: properties: compatible: @@ -266,6 +294,7 @@ allOf: vdd_lvs_1_2-supply: true patternProperties: "^vdd_s[1-9][0-2]?-supply$": true + - if: properties: compatible: @@ -277,6 +306,7 @@ allOf: vdd_l1-supply: true patternProperties: "^vdd_s[1-3]-supply$": true + - if: properties: compatible: @@ -292,6 +322,7 @@ allOf: patternProperties: "^vdd_l[479]-supply$": true "^vdd_s[1-5]-supply$": true + - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml index 1ddc1efd19e2..f97b8083678f 100644 --- a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml @@ -20,6 +20,7 @@ properties: lab: type: object + additionalProperties: false properties: qcom,soft-start-us: @@ -33,11 +34,19 @@ properties: description: Short-circuit and over-current interrupts for lab. + interrupt-names: + minItems: 1 + items: + - const: sc-err + - const: ocp + required: - interrupts + - interrupt-names ibb: type: object + additionalProperties: false properties: qcom,discharge-resistor-kohms: @@ -52,8 +61,15 @@ properties: description: Short-circuit and over-current interrupts for ibb. + interrupt-names: + minItems: 1 + items: + - const: sc-err + - const: ocp + required: - interrupts + - interrupt-names required: - compatible diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml index 091150c4e579..4a8a221bc902 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml @@ -42,6 +42,7 @@ patternProperties: "^DSV(P|N)$": type: object $ref: regulator.yaml# + unevaluatedProperties: false description: Properties for single display bias regulator. diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml index 7d0adb74a396..d61e8675f067 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml @@ -27,6 +27,7 @@ properties: description: properties for wled regulator $ref: regulator.yaml# + unevaluatedProperties: false properties: regulator-name: diff --git a/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml b/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml new file mode 100644 index 000000000000..78be79930fda --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/ti,tps65219.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI tps65219 Power Management Integrated Circuit regulators + +maintainers: + - Jerome Neanne <jerome.neanne@baylibre.com> + +description: | + Regulator nodes should be named to buck<number> and ldo<number>. + +properties: + compatible: + enum: + - ti,tps65219 + + reg: + maxItems: 1 + + system-power-controller: + type: boolean + description: Optional property that indicates that this device is + controlling system power. + + interrupts: + description: Short-circuit, over-current, under-voltage for regulators, PB interrupts. + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + description: Specifies the PIN numbers and Flags, as defined in + include/dt-bindings/interrupt-controller/irq.h + const: 1 + + ti,power-button: + type: boolean + description: | + Optional property that sets the EN/PB/VSENSE pin to be a + power-button. + TPS65219 has a multipurpose pin called EN/PB/VSENSE that can be either + 1. EN in which case it functions as an enable pin. + 2. VSENSE which compares the voltages and triggers an automatic + on/off request. + 3. PB in which case it can be configured to trigger an interrupt + to the SoC. + ti,power-button reflects the last one of those options + where the board has a button wired to the pin and triggers + an interrupt on pressing it. + +patternProperties: + "^buck[1-3]-supply$": + description: Input supply phandle of one regulator. + + "^ldo[1-4]-supply$": + description: Input supply phandle of one regulator. + + regulators: + type: object + description: | + list of regulators provided by this controller + + patternProperties: + "^ldo[1-4]$": + type: object + $ref: regulator.yaml# + description: + Properties for single LDO regulator. + + unevaluatedProperties: false + + "^buck[1-3]$": + type: object + $ref: regulator.yaml# + description: + Properties for single BUCK regulator. + + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tps65219: pmic@30 { + compatible = "ti,tps65219"; + reg = <0x30>; + buck1-supply = <&vcc_3v3_sys>; + buck2-supply = <&vcc_3v3_sys>; + buck3-supply = <&vcc_3v3_sys>; + ldo1-supply = <&vcc_3v3_sys>; + ldo2-supply = <&buck2_reg>; + ldo3-supply = <&vcc_3v3_sys>; + ldo4-supply = <&vcc_3v3_sys>; + + pinctrl-0 = <&pmic_irq_pins_default>; + + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + ti,power-button; + + regulators { + buck1_reg: buck1 { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-boot-on; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buck3_reg: buck3 { + regulator-name = "VDD_LPDDR4"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "VDDSHV_SD_IO_PMIC"; + regulator-min-microvolt = <33000000>; + regulator-max-microvolt = <33000000>; + }; + + ldo2_reg: ldo2 { + regulator-name = "VDDAR_CORE"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <18000000>; + regulator-max-microvolt = <18000000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-name = "VDD_PHY_2V5"; + regulator-min-microvolt = <25000000>; + regulator-max-microvolt = <25000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml index 494a454928ce..98db2aa74dc8 100644 --- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic Meson SoC Reset Controller maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml index 69cdab18d629..ca3b9be58058 100644 --- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml +++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml @@ -17,9 +17,6 @@ description: acts as directory-based coherency manager. All the properties in ePAPR/DeviceTree specification applies for this platform. -allOf: - - $ref: /schemas/cache-controller.yaml# - select: properties: compatible: @@ -33,11 +30,16 @@ select: properties: compatible: - items: - - enum: - - sifive,fu540-c000-ccache - - sifive,fu740-c000-ccache - - const: cache + oneOf: + - items: + - enum: + - sifive,fu540-c000-ccache + - sifive,fu740-c000-ccache + - const: cache + - items: + - const: microchip,mpfs-ccache + - const: sifive,fu540-c000-ccache + - const: cache cache-block-size: const: 64 @@ -72,29 +74,46 @@ properties: The reference to the reserved-memory for the L2 Loosely Integrated Memory region. The reserved memory node should be defined as per the bindings in reserved-memory.txt. -if: - properties: - compatible: - contains: - const: sifive,fu540-c000-ccache +allOf: + - $ref: /schemas/cache-controller.yaml# -then: - properties: - interrupts: - description: | - Must contain entries for DirError, DataError and DataFail signals. - maxItems: 3 - cache-sets: - const: 1024 - -else: - properties: - interrupts: - description: | - Must contain entries for DirError, DataError, DataFail, DirFail signals. - minItems: 4 - cache-sets: - const: 2048 + - if: + properties: + compatible: + contains: + enum: + - sifive,fu740-c000-ccache + - microchip,mpfs-ccache + + then: + properties: + interrupts: + description: | + Must contain entries for DirError, DataError, DataFail, DirFail signals. + minItems: 4 + + else: + properties: + interrupts: + description: | + Must contain entries for DirError, DataError and DataFail signals. + maxItems: 3 + + - if: + properties: + compatible: + contains: + const: sifive,fu740-c000-ccache + + then: + properties: + cache-sets: + const: 2048 + + else: + properties: + cache-sets: + const: 1024 additionalProperties: false diff --git a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml index 444be32a8a29..09c6c906b1f9 100644 --- a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml +++ b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic Meson Random number generator maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml index 72e8868db3e0..7822705ad16c 100644 --- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic Meson SoC UART Serial Interface maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> description: | The Amlogic Meson SoC UART Serial Interface is present on a large range diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml index 17db87cb9dab..c3c599096353 100644 --- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic Canvas Video Lookup Table maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> - Maxime Jourdan <mjourdan@baylibre.com> description: | diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml index 028c5d105adb..f47491aab3b1 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml @@ -20,6 +20,9 @@ properties: - qcom,apr-v2 - qcom,gpr + power-domains: + maxItems: 1 + qcom,apr-domain: $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2, 3, 4, 5, 6, 7] @@ -52,6 +55,26 @@ properties: 2 = Audio DSP Domain 3 = Application Processor Domain + qcom,glink-channels: + $ref: /schemas/types.yaml#/definitions/string-array + description: Channel name used for the communication + items: + - const: apr_audio_svc + + qcom,intents: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + List of (size, amount) pairs describing what intents should be + preallocated for this virtual channel. This can be used to tweak the + default intents available for the channel to meet expectations of the + remote. + + qcom,smd-channels: + $ref: /schemas/types.yaml#/definitions/string-array + description: Channel name used for the communication + items: + - const: apr_audio_svc + '#address-cells': const: 1 @@ -97,6 +120,26 @@ patternProperties: 3 = AMDB Service. 4 = Voice processing manager. + clock-controller: + $ref: /schemas/sound/qcom,q6dsp-lpass-clocks.yaml# + description: Qualcomm DSP LPASS clock controller + unevaluatedProperties: false + + dais: + type: object + oneOf: + - $ref: /schemas/sound/qcom,q6apm-dai.yaml# + - $ref: /schemas/sound/qcom,q6dsp-lpass-ports.yaml# + - $ref: /schemas/sound/qcom,q6asm-dais.yaml# + unevaluatedProperties: false + description: Qualcomm DSP audio ports + + routing: + type: object + $ref: /schemas/sound/qcom,q6adm-routing.yaml# + unevaluatedProperties: false + description: Qualcomm DSP LPASS audio routing + qcom,protection-domain: $ref: /schemas/types.yaml#/definitions/string-array description: protection domain service name and path for apr service @@ -107,17 +150,44 @@ patternProperties: "tms/servreg", "msm/modem/wlan_pd". "tms/servreg", "msm/slpi/sensor_pd". - '#address-cells': - const: 1 + allOf: + - if: + properties: + compatible: + enum: + - qcom,q6afe + then: + properties: + dais: + properties: + compatible: + const: qcom,q6afe-dais - '#size-cells': - const: 0 + - if: + properties: + compatible: + enum: + - qcom,q6apm + then: + properties: + dais: + properties: + compatible: + enum: + - qcom,q6apm-dais + - qcom,q6apm-lpass-dais - patternProperties: - "^.*@[0-9a-f]+$": - type: object - description: - Service based devices like clock controllers or digital audio interfaces. + - if: + properties: + compatible: + enum: + - qcom,q6asm + then: + properties: + dais: + properties: + compatible: + const: qcom,q6asm-dais additionalProperties: false @@ -125,6 +195,30 @@ required: - compatible - qcom,domain +allOf: + - if: + properties: + compatible: + enum: + - qcom,gpr + then: + properties: + power-domains: false + + - if: + required: + - qcom,glink-channels + then: + properties: + qcom,smd-channels: false + + - if: + required: + - qcom,smd-channels + then: + properties: + qcom,glink-channels: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/sound/adi,max98396.yaml b/Documentation/devicetree/bindings/sound/adi,max98396.yaml index 8d2ef991db40..7985b1410017 100644 --- a/Documentation/devicetree/bindings/sound/adi,max98396.yaml +++ b/Documentation/devicetree/bindings/sound/adi,max98396.yaml @@ -78,6 +78,40 @@ properties: interleaved on a single output channel. type: boolean + adi,dmon-stuck-enable: + description: + Enables the "data monitor stuck" feature. Once the data monitor is + enabled, it actively monitors the selected input data (from DIN) to the + speaker amplifier. Once a data error is detected, the data monitor + automatically places the device into software shutdown. + type: boolean + + adi,dmon-stuck-threshold-bits: + description: + Sets the threshold for the "data monitor stuck" feature, in bits. + enum: [9, 11, 13, 15] + default: 15 + + adi,dmon-magnitude-enable: + description: + Enables the "data monitor magnitude" feature. Once the data monitor is + enabled, it actively monitors the selected input data (from DIN) to the + speaker amplifier. Once a data error is detected, the data monitor + automatically places the device into software shutdown. + type: boolean + + adi,dmon-magnitude-threshold-bits: + description: + Sets the threshold for the "data monitor magnitude" feature, in bits. + enum: [2, 3, 4, 5] + default: 5 + + adi,dmon-duration-ms: + description: + Sets the duration for the "data monitor" feature, in milliseconds. + enum: [64, 256, 1024, 4096] + default: 64 + reset-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml new file mode 100644 index 000000000000..2f12cabe4c71 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/allwinner,sun50i-h6-dmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner H6 DMIC + +maintainers: + - Ban Tao <fengzheng923@gmail.com> + +properties: + compatible: + const: allwinner,sun50i-h6-dmic + + "#sound-dai-cells": + const: 0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: bus + - const: mod + + dmas: + items: + - description: RX DMA Channel + + dma-names: + items: + - const: rx + + resets: + maxItems: 1 + +required: + - "#sound-dai-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + #include <dt-bindings/clock/sun50i-h6-ccu.h> + #include <dt-bindings/reset/sun50i-h6-ccu.h> + + dmic: dmic@5095000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun50i-h6-dmic"; + reg = <0x05095000 0x400>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMIC>, <&ccu CLK_DMIC>; + clock-names = "bus", "mod"; + dmas = <&dma 7>; + dma-names = "rx"; + resets = <&ccu RST_BUS_DMIC>; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml index b4b35edcb493..5b8d59245f82 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml @@ -40,6 +40,7 @@ properties: patternProperties: "^dai-link-[0-9]+$": type: object + additionalProperties: false description: |- dai-link child nodes: Container for dai-link level properties and the CODEC sub-nodes. @@ -63,6 +64,7 @@ patternProperties: patternProperties: "^codec-[0-9]+$": type: object + additionalProperties: false description: |- Codecs: dai-link representing backend links should have at least one subnode. diff --git a/Documentation/devicetree/bindings/sound/apple,mca.yaml b/Documentation/devicetree/bindings/sound/apple,mca.yaml new file mode 100644 index 000000000000..d5dc92b5b654 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/apple,mca.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/apple,mca.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple MCA I2S transceiver + +description: | + MCA is an I2S transceiver peripheral found on M1 and other Apple chips. It is + composed of a number of identical clusters which can operate independently + or in an interlinked fashion. Up to 6 clusters have been seen on an MCA. + +maintainers: + - Martin Povišer <povik+lin@cutebit.org> + +properties: + compatible: + items: + - enum: + - apple,t6000-mca + - apple,t8103-mca + - const: apple,mca + + reg: + items: + - description: Register region of the MCA clusters proper + - description: Register region of the DMA glue and its FIFOs + + interrupts: + minItems: 4 + maxItems: 6 + description: + One interrupt per each cluster + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + dmas: + minItems: 16 + maxItems: 24 + description: + DMA channels corresponding to the SERDES units in the peripheral. They are + listed in groups of four per cluster, and within the group they are given + as associated to the TXA, RXA, TXB, RXB units. + + dma-names: + minItems: 16 + items: + - const: tx0a + - const: rx0a + - const: tx0b + - const: rx0b + - const: tx1a + - const: rx1a + - const: tx1b + - const: rx1b + - const: tx2a + - const: rx2a + - const: tx2b + - const: rx2b + - const: tx3a + - const: rx3a + - const: tx3b + - const: rx3b + - const: tx4a + - const: rx4a + - const: tx4b + - const: rx4b + - const: tx5a + - const: rx5a + - const: tx5b + - const: rx5b + description: | + Names for the DMA channels: 'tx'/'rx', then cluster number, then 'a'/'b' + based on the associated SERDES unit. + + clocks: + minItems: 4 + maxItems: 6 + description: + Clusters' input reference clock. + + resets: + maxItems: 1 + + power-domains: + minItems: 5 + maxItems: 7 + description: + First a general power domain for register access, then the power + domains of individual clusters for their operation. + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reg + - dmas + - dma-names + - clocks + - power-domains + - '#sound-dai-cells' + +additionalProperties: false + +examples: + - | + mca: i2s@9b600000 { + compatible = "apple,t6000-mca", "apple,mca"; + reg = <0x9b600000 0x10000>, + <0x9b200000 0x20000>; + + clocks = <&nco 0>, <&nco 1>, <&nco 2>, <&nco 3>; + power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>, + <&ps_mca2>, <&ps_mca3>; + dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>, + <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>, + <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>, + <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>; + dma-names = "tx0a", "rx0a", "tx0b", "rx0b", + "tx1a", "rx1a", "tx1b", "rx1b", + "tx2a", "rx2a", "tx2b", "rx2b", + "tx3a", "rx3a", "tx3b", "rx3b"; + + #sound-dai-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml index 5c368674d11a..64654ceef208 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml +++ b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml @@ -19,14 +19,17 @@ properties: description: "device name prefix" $ref: /schemas/types.yaml#/definitions/string convert-rate: - description: CPU to Codec rate convert. - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-rate" convert-channels: - description: CPU to Codec rate channels. - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-channels" + convert-sample-format: + $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-format" + patternProperties: "^endpoint(@[0-9a-f]+)?": $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + properties: mclk-fs: description: | @@ -65,12 +68,18 @@ patternProperties: - msb - lsb convert-rate: - description: CPU to Codec rate convert. - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-rate" convert-channels: - description: CPU to Codec rate channels. - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-channels" + convert-sample-format: + $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-format" + dai-tdm-slot-num: + description: Number of slots in use. + $ref: /schemas/types.yaml#/definitions/uint32 + dai-tdm-slot-width: + description: Width in bits for each slot. + $ref: /schemas/types.yaml#/definitions/uint32 dai-tdm-slot-width-map: description: Mapping of sample widths to slot widths. For hardware that cannot support a fixed slot width or a slot width always diff --git a/Documentation/devicetree/bindings/sound/audio-graph.yaml b/Documentation/devicetree/bindings/sound/audio-graph.yaml index 4b46794e5153..aaa99c2deda0 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph.yaml +++ b/Documentation/devicetree/bindings/sound/audio-graph.yaml @@ -27,11 +27,12 @@ properties: description: User specified audio sound widgets. $ref: /schemas/types.yaml#/definitions/non-unique-string-array convert-rate: - description: CPU to Codec rate convert. - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-rate" convert-channels: - description: CPU to Codec rate channels. - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-channels" + convert-sample-format: + $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-format" + pa-gpios: maxItems: 1 hp-det-gpio: diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml index 31800f70e9d9..7356084a2ca2 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml @@ -19,6 +19,7 @@ properties: compatible: enum: - cirrus,cs42l42 + - cirrus,cs42l83 reg: description: diff --git a/Documentation/devicetree/bindings/sound/dai-params.yaml b/Documentation/devicetree/bindings/sound/dai-params.yaml new file mode 100644 index 000000000000..f5fb71f9b603 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/dai-params.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/dai-params.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Digital Audio Interface (DAI) Stream Parameters + +maintainers: + - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + +select: false + +$defs: + + dai-channels: + description: Number of audio channels used by DAI + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 32 + + dai-sample-format: + description: Audio sample format used by DAI + $ref: /schemas/types.yaml#/definitions/string + enum: + - s8 + - s16_le + - s24_le + - s24_3le + - s32_le + + dai-sample-rate: + description: Audio sample rate used by DAI + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 8000 + maximum: 192000 + +properties: {} + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/sound/everest,es8326.yaml b/Documentation/devicetree/bindings/sound/everest,es8326.yaml new file mode 100755 index 000000000000..07781408e788 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/everest,es8326.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/everest,es8326.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Everest ES8326 audio CODEC + +maintainers: + - David Yang <yangxiaohua@everest-semi.com> + +properties: + compatible: + const: everest,es8326 + + reg: + maxItems: 1 + + clocks: + items: + - description: clock for master clock (MCLK) + + clock-names: + items: + - const: mclk + + "#sound-dai-cells": + const: 0 + + everest,jack-pol: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + just the value of reg 57. Bit(3) decides whether the jack polarity is inverted. + Bit(2) decides whether the button on the headset is inverted. + Bit(1)/(0) decides the mic properity to be OMTP/CTIA or auto. + minimum: 0x00 + maximum: 0x0f + default: 0x0f + + everest,mic1-src: + $ref: /schemas/types.yaml#/definitions/uint8 + description: + the value of reg 2A when headset plugged. + minimum: 0x00 + maximum: 0x77 + default: 0x22 + + everest,mic2-src: + $ref: /schemas/types.yaml#/definitions/uint8 + description: + the value of reg 2A when headset unplugged. + minimum: 0x00 + maximum: 0x77 + default: 0x44 + + everest,jack-detect-inverted: + $ref: /schemas/types.yaml#/definitions/flag + description: + Defined to invert the jack detection. + + everest,interrupt-src: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + value of reg 0x58, Defines the interrupt source. + Bit(2) 1 means button press triggers irq, 0 means not. + Bit(3) 1 means PIN9 is the irq source for jack detection. When set to 0, + bias change on PIN9 do not triggers irq. + Bit(4) 1 means PIN27 is the irq source for jack detection. + Bit(5) 1 means PIN9 is the irq source after MIC detect. + Bit(6) 1 means PIN27 is the irq source after MIC detect. + minimum: 0 + maximum: 0x3c + default: 0x08 + + everest,interrupt-clk: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + value of reg 0x59, Defines the interrupt output behavior. + Bit(0-3) 0 means irq pulse equals 512*internal clock + 1 means irq pulse equals 1024*internal clock + 2 means ... + 7 means irq pulse equals 65536*internal clock + 8 means irq mutes PA + 9 means irq mutes PA and DAC output + Bit(4) 1 means we invert the interrupt output. + Bit(6) 1 means the chip do not detect jack type after button released. + 0 means the chip detect jack type again after button released. + minimum: 0 + maximum: 0x7f + default: 0x45 + +required: + - compatible + - reg + - "#sound-dai-cells" + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + es8326: codec@19 { + compatible = "everest,es8326"; + reg = <0x19>; + clocks = <&clks 10>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + everest,mic1-src = [22]; + everest,mic2-src = [44]; + everest,jack-pol = [0e]; + everest,interrupt-src = [08]; + everest,interrupt-clk = [45]; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl,sai.yaml b/Documentation/devicetree/bindings/sound/fsl,sai.yaml new file mode 100644 index 000000000000..70c4111d59c7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,sai.yaml @@ -0,0 +1,216 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,sai.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Synchronous Audio Interface (SAI). + +maintainers: + - Shengjiu Wang <shengjiu.wang@nxp.com> + +description: | + The SAI is based on I2S module that used communicating with audio codecs, + which provides a synchronous audio interface that supports fullduplex + serial interfaces with frame synchronization such as I2S, AC97, TDM, and + codec/DSP interfaces. + +properties: + compatible: + oneOf: + - enum: + - fsl,vf610-sai + - fsl,imx6sx-sai + - fsl,imx6ul-sai + - fsl,imx7ulp-sai + - fsl,imx8mq-sai + - fsl,imx8qm-sai + - fsl,imx8ulp-sai + - items: + - enum: + - fsl,imx8mm-sai + - fsl,imx8mn-sai + - fsl,imx8mp-sai + - const: fsl,imx8mq-sai + + reg: + maxItems: 1 + + interrupts: + items: + - description: receive and transmit interrupt + + dmas: + maxItems: 2 + + dma-names: + maxItems: 2 + + clocks: + items: + - description: The ipg clock for register access + - description: master clock source 0 (obsoleted) + - description: master clock source 1 + - description: master clock source 2 + - description: master clock source 3 + - description: PLL clock source for 8kHz series + - description: PLL clock source for 11kHz series + minItems: 4 + + clock-names: + oneOf: + - items: + - const: bus + - const: mclk0 + - const: mclk1 + - const: mclk2 + - const: mclk3 + - const: pll8k + - const: pll11k + minItems: 4 + - items: + - const: bus + - const: mclk1 + - const: mclk2 + - const: mclk3 + - const: pll8k + - const: pll11k + minItems: 4 + + lsb-first: + description: | + Configures whether the LSB or the MSB is transmitted + first for the fifo data. If this property is absent, + the MSB is transmitted first as default, or the LSB + is transmitted first. + type: boolean + + big-endian: + description: | + required if all the SAI registers are big-endian rather than little-endian. + type: boolean + + fsl,sai-synchronous-rx: + description: | + SAI will work in the synchronous mode (sync Tx with Rx) which means + both the transmitter and the receiver will send and receive data by + following receiver's bit clocks and frame sync clocks. + type: boolean + + fsl,sai-asynchronous: + description: | + SAI will work in the asynchronous mode, which means both transmitter + and receiver will send and receive data by following their own bit clocks + and frame sync clocks separately. + If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the + default synchronous mode (sync Rx with Tx) will be used, which means both + transmitter and receiver will send and receive data by following clocks + of transmitter. + type: boolean + + fsl,dataline: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + Configure the dataline. It has 3 value for each configuration + maxItems: 16 + items: + items: + - description: format Default(0), I2S(1) or PDM(2) + enum: [0, 1, 2] + - description: dataline mask for 'rx' + - description: dataline mask for 'tx' + + fsl,sai-mclk-direction-output: + description: SAI will output the SAI MCLK clock. + type: boolean + + fsl,shared-interrupt: + description: Interrupt is shared with other modules. + type: boolean + + "#sound-dai-cells": + const: 0 + description: optional, some dts node didn't add it. + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,vf610-sai + then: + properties: + dmas: + items: + - description: DMA controller phandle and request line for TX + - description: DMA controller phandle and request line for RX + dma-names: + items: + - const: tx + - const: rx + else: + properties: + dmas: + items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX + dma-names: + items: + - const: rx + - const: tx + - if: + required: + - fsl,sai-asynchronous + then: + properties: + fsl,sai-synchronous-rx: false + +required: + - compatible + - reg + - interrupts + - dmas + - dma-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/vf610-clock.h> + sai2: sai@40031000 { + compatible = "fsl,vf610-sai"; + reg = <0x40031000 0x1000>; + interrupts = <86 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2_1>; + clocks = <&clks VF610_CLK_PLATFORM_BUS>, + <&clks VF610_CLK_SAI2>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 0 21>, + <&edma0 0 20>; + big-endian; + lsb-first; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx8mm-clock.h> + sai1: sai@30010000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30010000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI1_IPG>, + <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_SAI1_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; + dma-names = "rx", "tx"; + fsl,dataline = <1 0xff 0xff 2 0xff 0x11>; + #sound-dai-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt deleted file mode 100644 index fbdefc3fade7..000000000000 --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt +++ /dev/null @@ -1,95 +0,0 @@ -Freescale Synchronous Audio Interface (SAI). - -The SAI is based on I2S module that used communicating with audio codecs, -which provides a synchronous audio interface that supports fullduplex -serial interfaces with frame synchronization such as I2S, AC97, TDM, and -codec/DSP interfaces. - -Required properties: - - - compatible : Compatible list, contains "fsl,vf610-sai", - "fsl,imx6sx-sai", "fsl,imx6ul-sai", - "fsl,imx7ulp-sai", "fsl,imx8mq-sai", - "fsl,imx8qm-sai", "fsl,imx8mm-sai", - "fsl,imx8mn-sai", "fsl,imx8mp-sai", or - "fsl,imx8ulp-sai". - - - reg : Offset and length of the register set for the device. - - - clocks : Must contain an entry for each entry in clock-names. - - - clock-names : Must include the "bus" for register access and - "mclk1", "mclk2", "mclk3" for bit clock and frame - clock providing. - "pll8k", "pll11k" are optional, they are the clock - source for root clock, one is for 8kHz series rates - another one is for 11kHz series rates. - - dmas : Generic dma devicetree binding as described in - Documentation/devicetree/bindings/dma/dma.txt. - - - dma-names : Two dmas have to be defined, "tx" and "rx". - - - pinctrl-names : Must contain a "default" entry. - - - pinctrl-NNN : One property must exist for each entry in - pinctrl-names. See ../pinctrl/pinctrl-bindings.txt - for details of the property values. - - - lsb-first : Configures whether the LSB or the MSB is transmitted - first for the fifo data. If this property is absent, - the MSB is transmitted first as default, or the LSB - is transmitted first. - - - fsl,sai-synchronous-rx: This is a boolean property. If present, indicating - that SAI will work in the synchronous mode (sync Tx - with Rx) which means both the transmitter and the - receiver will send and receive data by following - receiver's bit clocks and frame sync clocks. - - - fsl,sai-asynchronous: This is a boolean property. If present, indicating - that SAI will work in the asynchronous mode, which - means both transmitter and receiver will send and - receive data by following their own bit clocks and - frame sync clocks separately. - - - fsl,dataline : configure the dataline. it has 3 value for each configuration - first one means the type: I2S(1) or PDM(2) - second one is dataline mask for 'rx' - third one is dataline mask for 'tx'. - for example: fsl,dataline = <1 0xff 0xff 2 0xff 0x11>; - it means I2S type rx mask is 0xff, tx mask is 0xff, PDM type - rx mask is 0xff, tx mask is 0x11 (dataline 1 and 4 enabled). - -Optional properties: - - - big-endian : Boolean property, required if all the SAI - registers are big-endian rather than little-endian. - -Optional properties (for mx6ul): - - - fsl,sai-mclk-direction-output: This is a boolean property. If present, - indicates that SAI will output the SAI MCLK clock. - -Note: -- If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the - default synchronous mode (sync Rx with Tx) will be used, which means both - transmitter and receiver will send and receive data by following clocks - of transmitter. -- fsl,sai-asynchronous and fsl,sai-synchronous-rx are exclusive. - -Example: -sai2: sai@40031000 { - compatible = "fsl,vf610-sai"; - reg = <0x40031000 0x1000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai2_1>; - clocks = <&clks VF610_CLK_PLATFORM_BUS>, - <&clks VF610_CLK_SAI2>, - <&clks 0>, <&clks 0>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>, - <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>; - big-endian; - lsb-first; -}; diff --git a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml index 233caa0ade87..67ccddd44489 100644 --- a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml +++ b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml @@ -61,6 +61,8 @@ patternProperties: cpu: description: Holds subnode which indicates cpu dai. type: object + additionalProperties: false + properties: sound-dai: maxItems: 1 @@ -68,6 +70,8 @@ patternProperties: codec: description: Holds subnode which indicates codec dai. type: object + additionalProperties: false + properties: sound-dai: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/imx-audio-card.yaml b/Documentation/devicetree/bindings/sound/imx-audio-card.yaml index bb3a435722c7..b6f5d486600e 100644 --- a/Documentation/devicetree/bindings/sound/imx-audio-card.yaml +++ b/Documentation/devicetree/bindings/sound/imx-audio-card.yaml @@ -58,6 +58,7 @@ patternProperties: cpu: description: Holds subnode which indicates cpu dai. type: object + additionalProperties: false properties: sound-dai: maxItems: 1 @@ -65,6 +66,7 @@ patternProperties: codec: description: Holds subnode which indicates codec dai. type: object + additionalProperties: false properties: sound-dai: minItems: 1 diff --git a/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml b/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml index 513cd28b2027..d427f7f623db 100644 --- a/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml +++ b/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml @@ -43,6 +43,16 @@ properties: required: - sound-dai + mediatek,adsp: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of MT8186 ADSP platform. + + mediatek,dai-link: + $ref: /schemas/types.yaml#/definitions/string-array + description: + A list of the desired dai-links in the sound card. Each entry is a + name defined in the machine driver. + additionalProperties: false required: diff --git a/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml b/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml index 059a7629b2d3..4fc5b045d3cf 100644 --- a/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml +++ b/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml @@ -43,6 +43,16 @@ properties: required: - sound-dai + mediatek,adsp: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of MT8186 ADSP platform. + + mediatek,dai-link: + $ref: /schemas/types.yaml#/definitions/string-array + description: + A list of the desired dai-links in the sound card. Each entry is a + name defined in the machine driver. + additionalProperties: false required: diff --git a/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml index 4fa179909c62..478be7e3fa29 100644 --- a/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml +++ b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml @@ -30,6 +30,8 @@ properties: headset-codec: type: object + additionalProperties: false + properties: sound-dai: $ref: /schemas/types.yaml#/definitions/phandle @@ -38,6 +40,8 @@ properties: speaker-codecs: type: object + additionalProperties: false + properties: sound-dai: minItems: 1 diff --git a/Documentation/devicetree/bindings/sound/nau8825.txt b/Documentation/devicetree/bindings/sound/nau8825.txt index 388a7bc60b1f..cb861aca8d40 100644 --- a/Documentation/devicetree/bindings/sound/nau8825.txt +++ b/Documentation/devicetree/bindings/sound/nau8825.txt @@ -71,6 +71,9 @@ Optional properties: - nuvoton,crosstalk-enable: make crosstalk function enable if set. + - nuvoton,adcout-drive-strong: make the drive strength of ADCOUT IO PIN strong if set. + Otherwise, the drive keeps normal strength. + - clocks: list of phandle and clock specifier pairs according to common clock bindings for the clocks described in clock-names - clock-names: should include "mclk" for the MCLK master clock diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml index a6905bcf89d2..1de11e7f33bb 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml @@ -14,6 +14,8 @@ properties: enum: - qcom,sc7280-lpass-rx-macro - qcom,sm8250-lpass-rx-macro + - qcom,sm8450-lpass-rx-macro + - qcom,sc8280xp-lpass-rx-macro reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml index 324595a62ae8..de8297b358e8 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml @@ -14,6 +14,8 @@ properties: enum: - qcom,sc7280-lpass-tx-macro - qcom,sm8250-lpass-tx-macro + - qcom,sm8450-lpass-tx-macro + - qcom,sc8280xp-lpass-tx-macro reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml index 7b4cc84eda8c..9f473c08cb2e 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml @@ -14,6 +14,8 @@ properties: enum: - qcom,sc7280-lpass-va-macro - qcom,sm8250-lpass-va-macro + - qcom,sm8450-lpass-va-macro + - qcom,sc8280xp-lpass-va-macro reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml index 13cdb8a10687..4959ad658eac 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml @@ -14,6 +14,8 @@ properties: enum: - qcom,sc7280-lpass-wsa-macro - qcom,sm8250-lpass-wsa-macro + - qcom,sm8450-lpass-wsa-macro + - qcom,sc8280xp-lpass-wsa-macro reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml b/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml new file mode 100644 index 000000000000..d0f7a79e240a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,q6adm-routing.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Audio Device Manager (Q6ADM) routing + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Qualcomm Audio Device Manager (Q6ADM) routing node represents routing + specific configuration. + +properties: + compatible: + enum: + - qcom,q6adm-routing + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - "#sound-dai-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/qcom,apr.h> + #include <dt-bindings/sound/qcom,q6asm.h> + + apr { + compatible = "qcom,apr-v2"; + qcom,domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt deleted file mode 100644 index 15c353a20de8..000000000000 --- a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt +++ /dev/null @@ -1,39 +0,0 @@ -Qualcomm Audio Device Manager (Q6ADM) binding - -Q6ADM is one of the APR audio service on Q6DSP. -Please refer to qcom,apr.txt for details of the coommon apr service bindings -used by the apr service device. - -- but must contain the following property: - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,q6adm-v<MAJOR-NUMBER>.<MINOR-NUMBER>". - Or "qcom,q6adm" where the version number can be queried - from DSP. - example "qcom,q6adm-v2.0" - - -= ADM routing -"routing" subnode of the ADM node represents adm routing specific configuration - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,q6adm-routing". - -- #sound-dai-cells - Usage: required - Value type: <u32> - Definition: Must be 0 - -= EXAMPLE -apr-service@8 { - compatible = "qcom,q6adm"; - reg = <APR_SVC_ADM>; - q6routing: routing { - compatible = "qcom,q6adm-routing"; - #sound-dai-cells = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt deleted file mode 100644 index bc6b5f1fe4f1..000000000000 --- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt +++ /dev/null @@ -1,20 +0,0 @@ -Qualcomm Audio Front End (Q6AFE) binding - -AFE is one of the APR audio service on Q6DSP -Please refer to qcom,apr.txt for details of the common apr service bindings -used by all apr services. Must contain the following properties. - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,q6afe-v<MAJOR-NUMBER>.<MINOR-NUMBER>" - Or "qcom,q6afe" where the version number can be queried - from DSP. - example "qcom,q6afe" - -= EXAMPLE - -apr-service@4 { - compatible = "qcom,q6afe"; - reg = <APR_SVC_AFE>; -}; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml index 5d972784321d..24f7bf2bfd95 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml @@ -16,16 +16,12 @@ properties: compatible: const: qcom,q6apm-dais - reg: - maxItems: 1 - iommus: maxItems: 1 required: - compatible - iommus - - reg additionalProperties: false @@ -37,17 +33,14 @@ examples: #address-cells = <1>; #size-cells = <0>; qcom,domain = <GPR_DOMAIN_ID_ADSP>; - service@1 { - compatible = "qcom,q6apm"; - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - apm-dai@1 { - compatible = "qcom,q6apm-dais"; - iommus = <&apps_smmu 0x1801 0x0>; + service@1 { + compatible = "qcom,q6apm"; reg = <1>; - }; + + dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1801 0x0>; + }; }; }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml b/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml new file mode 100644 index 000000000000..8deb8ffb143b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,q6asm-dais.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Audio Stream Manager (Q6ASM) + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Q6ASM is one of the APR audio services on Q6DSP. Each of its subnodes + represent a dai with board specific configuration. + +properties: + compatible: + enum: + - qcom,q6asm-dais + + iommus: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^dai@[0-9]+$": + type: object + description: + Q6ASM Digital Audio Interface + + properties: + reg: + maxItems: 1 + + direction: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: | + The direction of the dai stream:: + - Q6ASM_DAI_TX_RX (0) for both tx and rx + - Q6ASM_DAI_TX (1) for only tx (Capture/Encode) + - Q6ASM_DAI_RX (2) for only rx (Playback/Decode) + + is-compress-dai: + type: boolean + description: + Compress offload dai. + + dependencies: + is-compress-dai: ["direction"] + + required: + - reg + + additionalProperties: false + +required: + - compatible + - "#sound-dai-cells" + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/qcom,apr.h> + #include <dt-bindings/sound/qcom,q6asm.h> + + apr { + compatible = "qcom,apr-v2"; + qcom,domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + dais { + compatible = "qcom,q6asm-dais"; + iommus = <&apps_smmu 0x1821 0x0>; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + is-compress-dai; + direction = <1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt deleted file mode 100644 index 0d0075125243..000000000000 --- a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt +++ /dev/null @@ -1,70 +0,0 @@ -Qualcomm Audio Stream Manager (Q6ASM) binding - -Q6ASM is one of the APR audio service on Q6DSP. -Please refer to qcom,apr.txt for details of the common apr service bindings -used by the apr service device. - -- but must contain the following property: - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,q6asm-v<MAJOR-NUMBER>.<MINOR-NUMBER>". - Or "qcom,q6asm" where the version number can be queried - from DSP. - example "qcom,q6asm-v2.0" - -= ASM DAIs (Digital Audio Interface) -"dais" subnode of the ASM node represents dai specific configuration - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,q6asm-dais". - -- #sound-dai-cells - Usage: required - Value type: <u32> - Definition: Must be 1 - -== ASM DAI is subnode of "dais" and represent a dai, it includes board specific -configuration of each dai. Must contain the following properties. - -- reg - Usage: required - Value type: <u32> - Definition: Must be dai id - -- direction: - Usage: Required for Compress offload dais - Value type: <u32> - Definition: Specifies the direction of the dai stream - Q6ASM_DAI_TX_RX (0) for both tx and rx - Q6ASM_DAI_TX (1) for only tx (Capture/Encode) - Q6ASM_DAI_RX (2) for only rx (Playback/Decode) - -- is-compress-dai: - Usage: Required for Compress offload dais - Value type: <boolean> - Definition: present for Compress offload dais - - -= EXAMPLE -#include <dt-bindings/sound/qcom,q6asm.h> - -apr-service@7 { - compatible = "qcom,q6asm"; - reg = <APR_SVC_ASM>; - q6asmdai: dais { - compatible = "qcom,q6asm-dais"; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <1>; - - dai@0 { - reg = <0>; - direction = <Q6ASM_DAI_RX>; - is-compress-dai; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6core.txt b/Documentation/devicetree/bindings/sound/qcom,q6core.txt deleted file mode 100644 index 5cd4cc9b1fde..000000000000 --- a/Documentation/devicetree/bindings/sound/qcom,q6core.txt +++ /dev/null @@ -1,21 +0,0 @@ -Qualcomm ADSP Core service binding - -Q6CORE is one of the APR audio service on Q6DSP. -Please refer to qcom,apr.txt for details of the common apr service bindings -used by the apr service device. - -- but must contain the following property: - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,q6core-v<MAJOR-NUMBER>.<MINOR-NUMBER>". - Or "qcom,q6core" where the version number can be queried - from DSP. - example "qcom,q6core-v2.0" - -= EXAMPLE -apr-service@3 { - compatible = "qcom,q6core"; - reg = <APR_SVC_ADSP_CORE>; -}; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml index f83f00737a2f..fd567d20417d 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml @@ -18,9 +18,6 @@ properties: - qcom,q6afe-clocks - qcom,q6prm-lpass-clocks - reg: - maxItems: 1 - '#clock-cells': const: 2 description: @@ -32,7 +29,6 @@ properties: required: - compatible - - reg - "#clock-cells" additionalProperties: false @@ -42,19 +38,22 @@ examples: #include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/sound/qcom,q6afe.h> apr { + compatible = "qcom,apr-v2"; + qcom,domain = <APR_DOMAIN_ADSP>; #address-cells = <1>; #size-cells = <0>; - apr-service@4 { + + service@4 { + compatible = "qcom,q6afe"; reg = <APR_SVC_AFE>; - #address-cells = <1>; - #size-cells = <0>; - clock-controller@2 { - compatible = "qcom,q6afe-clocks"; - reg = <2>; - #clock-cells = <2>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; }; }; - }; + }; - | #include <dt-bindings/soc/qcom,gpr.h> @@ -63,15 +62,14 @@ examples: qcom,domain = <GPR_DOMAIN_ID_ADSP>; #address-cells = <1>; #size-cells = <0>; + service@2 { reg = <GPR_PRM_MODULE_IID>; compatible = "qcom,q6prm"; - #address-cells = <1>; - #size-cells = <0>; - clock-controller@2 { - compatible = "qcom,q6prm-lpass-clocks"; - reg = <2>; - #clock-cells = <2>; + + clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; }; }; - }; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml index dc7fba7b92d5..e53fc0960a14 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml @@ -18,9 +18,6 @@ properties: - qcom,q6afe-dais - qcom,q6apm-lpass-dais - reg: - maxItems: 1 - '#sound-dai-cells': const: 1 @@ -145,7 +142,6 @@ patternProperties: required: - compatible - - reg - "#sound-dai-cells" - "#address-cells" - "#size-cells" @@ -157,26 +153,29 @@ examples: #include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/sound/qcom,q6afe.h> apr { + compatible = "qcom,apr-v2"; #address-cells = <1>; #size-cells = <0>; - apr-service@4 { + qcom,domain = <APR_DOMAIN_ADSP>; + + service@4 { + compatible = "qcom,q6afe"; reg = <APR_SVC_AFE>; - #address-cells = <1>; - #size-cells = <0>; - q6afedai@1 { - compatible = "qcom,q6afe-dais"; - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <1>; - - dai@22 { - reg = <QUATERNARY_MI2S_RX>; - qcom,sd-lines = <0 1 2 3>; - }; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@22 { + reg = <QUATERNARY_MI2S_RX>; + qcom,sd-lines = <0 1 2 3>; + }; }; }; - }; + }; - | #include <dt-bindings/soc/qcom,gpr.h> gpr { @@ -184,22 +183,21 @@ examples: #address-cells = <1>; #size-cells = <0>; qcom,domain = <GPR_DOMAIN_ID_ADSP>; + service@1 { compatible = "qcom,q6apm"; reg = <GPR_APM_MODULE_IID>; - #address-cells = <1>; - #size-cells = <0>; - q6apmdai@1 { - compatible = "qcom,q6apm-lpass-dais"; - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <1>; - - dai@22 { - reg = <QUATERNARY_MI2S_RX>; - qcom,sd-lines = <0 1 2 3>; - }; + + dais { + compatible = "qcom,q6apm-lpass-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@22 { + reg = <QUATERNARY_MI2S_RX>; + qcom,sd-lines = <0 1 2 3>; + }; }; }; - }; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml index e6e27d09783e..70080d04ddc9 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml @@ -20,9 +20,11 @@ properties: - qcom,apq8016-sbc-sndcard - qcom,db845c-sndcard - qcom,msm8916-qdsp6-sndcard + - qcom,qrb5165-rb5-sndcard + - qcom,sc8280xp-sndcard - qcom,sdm845-sndcard - qcom,sm8250-sndcard - - qcom,qrb5165-rb5-sndcard + - qcom,sm8450-sndcard audio-routing: $ref: /schemas/types.yaml#/definitions/non-unique-string-array @@ -71,6 +73,8 @@ patternProperties: cpu: description: Holds subnode which indicates cpu dai. type: object + additionalProperties: false + properties: sound-dai: maxItems: 1 @@ -78,6 +82,8 @@ patternProperties: platform: description: Holds subnode which indicates platform dai. type: object + additionalProperties: false + properties: sound-dai: maxItems: 1 @@ -85,6 +91,8 @@ patternProperties: codec: description: Holds subnode which indicates codec dai. type: object + additionalProperties: false + properties: sound-dai: minItems: 1 diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml index e17c0245f77a..268895c90bd5 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml @@ -129,6 +129,8 @@ properties: patternProperties: "^dvc-[0-1]$": type: object + additionalProperties: false + properties: dmas: maxItems: 1 @@ -145,7 +147,7 @@ properties: patternProperties: "^mix-[0-1]$": type: object - # no properties + additionalProperties: false additionalProperties: false rcar_sound,ctu: @@ -154,7 +156,7 @@ properties: patternProperties: "^ctu-[0-7]$": type: object - # no properties + additionalProperties: false additionalProperties: false rcar_sound,src: @@ -163,6 +165,8 @@ properties: patternProperties: "^src-[0-9]$": type: object + additionalProperties: false + properties: interrupts: maxItems: 1 @@ -186,6 +190,8 @@ properties: patternProperties: "^ssiu-[0-9]+$": type: object + additionalProperties: false + properties: dmas: maxItems: 2 @@ -206,6 +212,8 @@ properties: patternProperties: "^ssi-[0-9]$": type: object + additionalProperties: false + properties: interrupts: maxItems: 1 @@ -243,6 +251,8 @@ properties: patternProperties: "^dai([0-9]+)?$": type: object + additionalProperties: false + properties: playback: $ref: /schemas/types.yaml#/definitions/phandle-array diff --git a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml index a01c4ad929b8..447e013f6e17 100644 --- a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml @@ -23,6 +23,7 @@ properties: cpu: type: object + additionalProperties: false properties: sound-dai: minItems: 2 @@ -34,6 +35,7 @@ properties: - sound-dai codec: + additionalProperties: false type: object properties: sound-dai: diff --git a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml index ec50bcb4af5f..31095913e330 100644 --- a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml @@ -19,6 +19,7 @@ properties: cpu: type: object + additionalProperties: false properties: sound-dai: maxItems: 1 @@ -28,6 +29,7 @@ properties: codec: type: object + additionalProperties: false properties: sound-dai: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/samsung,snow.yaml b/Documentation/devicetree/bindings/sound/samsung,snow.yaml index 51a83d3c7274..3d49aa4c9be2 100644 --- a/Documentation/devicetree/bindings/sound/samsung,snow.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,snow.yaml @@ -19,6 +19,7 @@ properties: codec: type: object + additionalProperties: false properties: sound-dai: description: List of phandles to the CODEC and HDMI IP nodes. @@ -30,6 +31,7 @@ properties: cpu: type: object + additionalProperties: false properties: sound-dai: description: Phandle to the Samsung I2S controller. diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml index fe2e15504ebc..56d206f97a96 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -60,6 +60,7 @@ required: patternProperties: "^audio-controller@[0-9a-f]+$": type: object + additionalProperties: false description: Two subnodes corresponding to SAI sub-block instances A et B can be defined. Subnode can be omitted for unsused sub-block. @@ -121,6 +122,10 @@ patternProperties: description: Configure the SAI device as master clock provider. const: 0 + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + required: - compatible - "#sound-dai-cells" diff --git a/Documentation/devicetree/bindings/sound/ti,src4xxx.yaml b/Documentation/devicetree/bindings/sound/ti,src4xxx.yaml new file mode 100644 index 000000000000..9681b72b4918 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,src4xxx.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,src4xxx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments SRC4392 Device Tree Bindings + +description: | + The SRC4392 is a digital audio codec that can be connected via + I2C or SPI. Currently, only I2C bus is supported. + +maintainers: + - Matt Flax <flatmax@flatmax.com> + +allOf: + - $ref: name-prefix.yaml# + +properties: + compatible: + const: ti,src4392 + + "#sound-dai-cells": + const: 0 + + reg: + maxItems: 1 + +required: + - "#sound-dai-cells" + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@70 { + #sound-dai-cells = <0>; + compatible = "ti,src4392"; + reg = <0x70>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/sound/ti,ts3a227e.yaml b/Documentation/devicetree/bindings/sound/ti,ts3a227e.yaml new file mode 100644 index 000000000000..785930658029 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,ts3a227e.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,ts3a227e.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TS3A227E + Autonomous Audio Accessory Detection and Configuration Switch + +maintainers: + - Dylan Reid <dgreid@chromium.org> + +description: | + The TS3A227E detect headsets of 3-ring and 4-ring standards and + switches automatically to route the microphone correctly. It also + handles key press detection in accordance with the Android audio + headset specification v1.0. + +properties: + compatible: + enum: + - ti,ts3a227e + + reg: + const: 0x3b + + interrupts: + maxItems: 1 + + ti,micbias: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Intended MICBIAS voltage (datasheet section 9.6.7). + enum: + - 0 # 2.1 V + - 1 # 2.2 V + - 2 # 2.3 V + - 3 # 2.4 V + - 4 # 2.5 V + - 5 # 2.6 V + - 6 # 2.7 V + - 7 # 2.8 V + default: 1 + + ti,debounce-release-ms: + description: key release debounce time in ms (datasheet section 9.6.7). + enum: + - 0 + - 20 + default: 20 + + ti,debounce-press-ms: + description: key press debounce time in ms (datasheet section 9.6.7). + enum: + - 2 + - 40 + - 80 + - 120 + default: 80 + + ti,debounce-insertion-ms: + description: headset insertion debounce time in ms (datasheet section 9.6.5). + enum: + - 2 + - 30 + - 60 + - 90 + - 120 + - 150 + - 1000 + - 2000 + default: 90 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec: audio-controller@3b { + compatible = "ti,ts3a227e"; + reg = <0x3b>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/ts3a227e.txt b/Documentation/devicetree/bindings/sound/ts3a227e.txt deleted file mode 100644 index 21ab45bc7e8f..000000000000 --- a/Documentation/devicetree/bindings/sound/ts3a227e.txt +++ /dev/null @@ -1,30 +0,0 @@ -Texas Instruments TS3A227E -Autonomous Audio Accessory Detection and Configuration Switch - -The TS3A227E detect headsets of 3-ring and 4-ring standards and -switches automatically to route the microphone correctly. It also -handles key press detection in accordance with the Android audio -headset specification v1.0. - -Required properties: - - - compatible: Should contain "ti,ts3a227e". - - reg: The i2c address. Should contain <0x3b>. - - interrupts: Interrupt number for /INT pin from the 227e - -Optional properies: - - ti,micbias: Intended MICBIAS voltage (datasheet section 9.6.7). - Select 0/1/2/3/4/5/6/7 to specify MICBIAS voltage - 2.1V/2.2V/2.3V/2.4V/2.5V/2.6V/2.7V/2.8V - Default value is "1" (2.2V). - -Examples: - - i2c { - ts3a227e@3b { - compatible = "ti,ts3a227e"; - reg = <0x3b>; - interrupt-parent = <&gpio>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - }; - }; diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml index 50de0da42c13..0c10f7678178 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic Meson SPI Communication Controller maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> allOf: - $ref: "spi-controller.yaml#" diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml index 8a9d526d06eb..ac3b2ec300ac 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic Meson SPI Flash Controller maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> allOf: - $ref: "spi-controller.yaml#" diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml index 970b1119898b..a453996c13f2 100644 --- a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml +++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml @@ -85,8 +85,9 @@ examples: compatible = "mediatek,mt8173-nor"; reg = <0 0x1100d000 0 0xe0>; interrupts = <1>; - clocks = <&pericfg CLK_PERI_SPI>, <&topckgen CLK_TOP_SPINFI_IFR_SEL>; - clock-names = "spi", "sf"; + clocks = <&pericfg CLK_PERI_SPI>, <&topckgen CLK_TOP_SPINFI_IFR_SEL>, + <&pericfg CLK_PERI_NFI>; + clock-names = "spi", "sf", "axi"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml index 7326c0a28d16..1051690e3753 100644 --- a/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml +++ b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml @@ -4,7 +4,11 @@ $id: http://devicetree.org/schemas/spi/microchip,mpfs-spi.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Microchip MPFS {Q,}SPI Controller Device Tree Bindings +title: Microchip FPGA {Q,}SPI Controllers + +description: + SPI and QSPI controllers on Microchip PolarFire SoC and the "soft"/ + fabric IP cores they are based on maintainers: - Conor Dooley <conor.dooley@microchip.com> @@ -14,9 +18,12 @@ allOf: properties: compatible: - enum: - - microchip,mpfs-spi - - microchip,mpfs-qspi + oneOf: + - items: + - const: microchip,mpfs-qspi + - const: microchip,coreqspi-rtl-v2 + - const: microchip,coreqspi-rtl-v2 #FPGA QSPI + - const: microchip,mpfs-spi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt index b98203ca656d..a4e72e52af59 100644 --- a/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt +++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt @@ -3,7 +3,8 @@ Nuvoton NPCM Peripheral Serial Peripheral Interface(PSPI) controller driver Nuvoton NPCM7xx SOC support two PSPI channels. Required properties: - - compatible : "nuvoton,npcm750-pspi" for NPCM7XX BMC + - compatible : "nuvoton,npcm750-pspi" for Poleg NPCM7XX. + "nuvoton,npcm845-pspi" for Arbel NPCM8XX. - #address-cells : should be 1. see spi-bus.txt - #size-cells : should be 0. see spi-bus.txt - specifies physical base address and size of the register. diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad-peripheral-props.yaml index 24e0c2181d25..2c3cada75339 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad-peripheral-props.yaml @@ -29,5 +29,4 @@ properties: minimum: 0 maximum: 255 -unevaluatedProperties: true - +additionalProperties: true diff --git a/Documentation/devicetree/bindings/spi/ralink,mt7621-spi.yaml b/Documentation/devicetree/bindings/spi/ralink,mt7621-spi.yaml new file mode 100644 index 000000000000..22879f7dcb77 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/ralink,mt7621-spi.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/ralink,mt7621-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +maintainers: + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +title: Mediatek MT7621/MT7628 SPI controller + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + const: ralink,mt7621-spi + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: spi + + resets: + maxItems: 1 + + reset-names: + const: spi + +required: + - compatible + - reg + - resets + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt7621-clk.h> + #include <dt-bindings/reset/mt7621-reset.h> + + spi@b00 { + compatible = "ralink,mt7621-spi"; + reg = <0xb00 0x100>; + clocks = <&sysc MT7621_CLK_SPI>; + clock-names = "spi"; + resets = <&sysc MT7621_RST_SPI>; + reset-names = "spi"; + + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins>; + }; diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml index 5de710adfa63..491a695a2deb 100644 --- a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml @@ -47,10 +47,16 @@ properties: - renesas,msiof-r8a77980 # R-Car V3H - renesas,msiof-r8a77990 # R-Car E3 - renesas,msiof-r8a77995 # R-Car D3 - - renesas,msiof-r8a779a0 # R-Car V3U - const: renesas,rcar-gen3-msiof # generic R-Car Gen3 and RZ/G2 # compatible device - items: + - enum: + - renesas,msiof-r8a779a0 # R-Car V3U + - renesas,msiof-r8a779f0 # R-Car S4-8 + - renesas,msiof-r8a779g0 # R-Car V4H + - const: renesas,rcar-gen4-msiof # generic R-Car Gen4 + # compatible device + - items: - const: renesas,sh-msiof # deprecated reg: @@ -69,6 +75,12 @@ properties: clocks: maxItems: 1 + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + num-cs: description: | Total number of chip selects (default is 1). diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index 37c3c272407d..d33b72fabc5d 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -104,7 +104,6 @@ properties: const: spi reg-io-width: - $ref: /schemas/types.yaml#/definitions/uint32 description: I/O register width (in bytes) implemented by this device default: 4 enum: [ 2, 4 ] diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 655713fba7e2..01042a7f382e 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -96,6 +96,11 @@ patternProperties: $ref: spi-peripheral-props.yaml properties: + spi-3wire: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device requires 3-wire mode. + spi-cpha: $ref: /schemas/types.yaml#/definitions/flag description: diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml index 1d46877fe46a..8b44284d30c6 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml @@ -19,7 +19,9 @@ properties: - fsl,imx7ulp-spi - fsl,imx8qxp-spi - items: - - const: fsl,imx8ulp-spi + - enum: + - fsl,imx8ulp-spi + - fsl,imx93-spi - const: fsl,imx7ulp-spi reg: maxItems: 1 @@ -37,6 +39,16 @@ properties: - const: per - const: ipg + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + fsl,spi-only-use-cs1-sel: description: spi common code does not support use of CS signals discontinuously. diff --git a/Documentation/devicetree/bindings/spi/spi-mt7621.txt b/Documentation/devicetree/bindings/spi/spi-mt7621.txt deleted file mode 100644 index d5baec0fa56e..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-mt7621.txt +++ /dev/null @@ -1,26 +0,0 @@ -Binding for MTK SPI controller (MT7621 MIPS) - -Required properties: -- compatible: Should be one of the following: - - "ralink,mt7621-spi": for mt7621/mt7628/mt7688 platforms -- #address-cells: should be 1. -- #size-cells: should be 0. -- reg: Address and length of the register set for the device -- resets: phandle to the reset controller asserting this device in - reset - See ../reset/reset.txt for details. - -Optional properties: -- cs-gpios: see spi-bus.txt. - -Example: - -- SoC Specific Portion: -spi0: spi@b00 { - compatible = "ralink,mt7621-spi"; - reg = <0xb00 0x100>; - #address-cells = <1>; - #size-cells = <0>; - resets = <&rstctrl 18>; - reset-names = "spi"; -}; diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index a4abe1588005..dca677f9e1b9 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -29,11 +29,6 @@ properties: description: Chip select used by the device. - spi-3wire: - $ref: /schemas/types.yaml#/definitions/flag - description: - The device requires 3-wire mode. - spi-cs-high: $ref: /schemas/types.yaml#/definitions/flag description: diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml index 52a78a2e362e..66e49947b703 100644 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml @@ -27,6 +27,7 @@ properties: - items: - enum: - rockchip,px30-spi + - rockchip,rk3128-spi - rockchip,rk3188-spi - rockchip,rk3288-spi - rockchip,rk3308-spi @@ -34,6 +35,7 @@ properties: - rockchip,rk3368-spi - rockchip,rk3399-spi - rockchip,rk3568-spi + - rockchip,rk3588-spi - rockchip,rv1126-spi - const: rockchip,rk3066-spi @@ -80,6 +82,9 @@ properties: where the "sleep" configuration may describe the state the pins should be in during system suspend. + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml index e349fa5de606..daf2a859418d 100644 --- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml +++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic Meson G12A DWC3 USB SoC Controller Glue maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> description: | The Amlogic G12A embeds a DWC3 USB IP Core configured for USB2 and USB3 diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml index e63b66545317..b019d490170d 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml @@ -24,6 +24,7 @@ properties: - mediatek,mt2712-mtu3 - mediatek,mt8173-mtu3 - mediatek,mt8183-mtu3 + - mediatek,mt8188-mtu3 - mediatek,mt8192-mtu3 - mediatek,mt8195-mtu3 - const: mediatek,mtu3 diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index fea3e7092ace..cd2f7cb6745a 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -33,6 +33,7 @@ properties: - qcom,sm6115-dwc3 - qcom,sm6125-dwc3 - qcom,sm6350-dwc3 + - qcom,sm6375-dwc3 - qcom,sm8150-dwc3 - qcom,sm8250-dwc3 - qcom,sm8350-dwc3 @@ -108,12 +109,17 @@ properties: HS/FS/LS modes are supported. type: boolean + wakeup-source: true + # Required child node: patternProperties: "^usb@[0-9a-f]+$": $ref: snps,dwc3.yaml# + properties: + wakeup-source: false + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 2f0151e9f6be..9bf7c2cd7e89 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -819,6 +819,8 @@ patternProperties: description: MNT Research GmbH "^modtronix,.*": description: Modtronix Engineering + "^moortec,.*": + description: Moortec Semiconductor Ltd. "^mosaixtech,.*": description: Mosaix Technologies, Inc. "^motorola,.*": diff --git a/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml b/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml index c7459cf70e30..497d60408ea0 100644 --- a/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Meson GXBB SoCs Watchdog timer maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> allOf: - $ref: watchdog.yaml# diff --git a/Documentation/doc-guide/kernel-doc.rst b/Documentation/doc-guide/kernel-doc.rst index 9c779bd7a751..1dcbd7332476 100644 --- a/Documentation/doc-guide/kernel-doc.rst +++ b/Documentation/doc-guide/kernel-doc.rst @@ -14,6 +14,9 @@ when it is embedded in source files. reasons. The kernel source contains tens of thousands of kernel-doc comments. Please stick to the style described here. +.. note:: kernel-doc does not cover Rust code: please see + Documentation/rust/general-information.rst instead. + The kernel-doc structure is extracted from the comments, and proper `Sphinx C Domain`_ function and type descriptions with anchors are generated from them. The descriptions are filtered for special kernel-doc diff --git a/Documentation/doc-guide/sphinx.rst b/Documentation/doc-guide/sphinx.rst index 1228b85f6f77..c708cec889af 100644 --- a/Documentation/doc-guide/sphinx.rst +++ b/Documentation/doc-guide/sphinx.rst @@ -48,10 +48,6 @@ or ``virtualenv``, depending on how your distribution packaged Python 3. on the Sphinx version, it should be installed separately, with ``pip install sphinx_rtd_theme``. - #) Some ReST pages contain math expressions. Due to the way Sphinx works, - those expressions are written using LaTeX notation. It needs texlive - installed with amsfonts and amsmath in order to evaluate them. - In summary, if you want to install Sphinx version 2.4.4, you should do:: $ virtualenv sphinx_2.4.4 @@ -86,6 +82,27 @@ Depending on the distribution, you may also need to install a series of ``texlive`` packages that provide the minimal set of functionalities required for ``XeLaTeX`` to work. +Math Expressions in HTML +------------------------ + +Some ReST pages contain math expressions. Due to the way Sphinx works, +those expressions are written using LaTeX notation. +There are two options for Sphinx to render math expressions in html output. +One is an extension called `imgmath`_ which converts math expressions into +images and embeds them in html pages. +The other is an extension called `mathjax`_ which delegates math rendering +to JavaScript capable web browsers. +The former was the only option for pre-6.1 kernel documentation and it +requires quite a few texlive packages including amsfonts and amsmath among +others. + +Since kernel release 6.1, html pages with math expressions can be built +without installing any texlive packages. See `Choice of Math Renderer`_ for +further info. + +.. _imgmath: https://www.sphinx-doc.org/en/master/usage/extensions/math.html#module-sphinx.ext.imgmath +.. _mathjax: https://www.sphinx-doc.org/en/master/usage/extensions/math.html#module-sphinx.ext.mathjax + .. _sphinx-pre-install: Checking for Sphinx dependencies @@ -164,6 +181,38 @@ To remove the generated documentation, run ``make cleandocs``. as well would improve the quality of images embedded in PDF documents, especially for kernel releases 5.18 and later. +Choice of Math Renderer +----------------------- + +Since kernel release 6.1, mathjax works as a fallback math renderer for +html output.\ [#sph1_8]_ + +Math renderer is chosen depending on available commands as shown below: + +.. table:: Math Renderer Choices for HTML + + ============= ================= ============ + Math renderer Required commands Image format + ============= ================= ============ + imgmath latex, dvipng PNG (raster) + mathjax + ============= ================= ============ + +The choice can be overridden by setting an environment variable +``SPHINX_IMGMATH`` as shown below: + +.. table:: Effect of Setting ``SPHINX_IMGMATH`` + + ====================== ======== + Setting Renderer + ====================== ======== + ``SPHINX_IMGMATH=yes`` imgmath + ``SPHINX_IMGMATH=no`` mathjax + ====================== ======== + +.. [#sph1_8] Fallback of math renderer requires Sphinx >=1.8. + + Writing Documentation ===================== diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst index 55272942e721..5e6de4ab25dc 100644 --- a/Documentation/driver-api/driver-model/devres.rst +++ b/Documentation/driver-api/driver-model/devres.rst @@ -301,6 +301,7 @@ IO region devm_release_region() devm_release_resource() devm_request_mem_region() + devm_request_free_mem_region() devm_request_region() devm_request_resource() @@ -334,7 +335,7 @@ IRQ devm_irq_alloc_descs_from() devm_irq_alloc_generic_chip() devm_irq_setup_generic_chip() - devm_irq_sim_init() + devm_irq_domain_create_sim() LED devm_led_classdev_register() @@ -392,7 +393,9 @@ PHY PINCTRL devm_pinctrl_get() devm_pinctrl_put() + devm_pinctrl_get_select() devm_pinctrl_register() + devm_pinctrl_register_and_init() devm_pinctrl_unregister() POWER @@ -401,14 +404,24 @@ POWER PWM devm_pwm_get() - devm_of_pwm_get() devm_fwnode_pwm_get() REGULATOR + devm_regulator_bulk_register_supply_alias() devm_regulator_bulk_get() + devm_regulator_bulk_get_enable() + devm_regulator_bulk_put() devm_regulator_get() + devm_regulator_get_enable() + devm_regulator_get_enable_optional() + devm_regulator_get_exclusive() + devm_regulator_get_optional() + devm_regulator_irq_helper() devm_regulator_put() devm_regulator_register() + devm_regulator_register_notifier() + devm_regulator_register_supply_alias() + devm_regulator_unregister_notifier() RESET devm_reset_control_get() @@ -427,6 +440,8 @@ SLAVE DMA ENGINE devm_acpi_dma_controller_register() SPI + devm_spi_alloc_master() + devm_spi_alloc_slave() devm_spi_register_master() WATCHDOG diff --git a/Documentation/driver-api/isa.rst b/Documentation/driver-api/isa.rst index def4a7b690b5..3df1b1696524 100644 --- a/Documentation/driver-api/isa.rst +++ b/Documentation/driver-api/isa.rst @@ -100,7 +100,7 @@ I believe platform_data is available for this, but if rather not, moving the isa_driver pointer to the private struct isa_dev is ofcourse fine as well. -Then, if the the driver did not provide a .match, it matches. If it did, +Then, if the driver did not provide a .match, it matches. If it did, the driver match() method is called to determine a match. If it did **not** match, dev->platform_data is reset to indicate this to diff --git a/Documentation/driver-api/pwm.rst b/Documentation/driver-api/pwm.rst index fd26c3d895b6..8c71a2055d27 100644 --- a/Documentation/driver-api/pwm.rst +++ b/Documentation/driver-api/pwm.rst @@ -40,8 +40,7 @@ after usage with pwm_free(). New users should use the pwm_get() function and pass to it the consumer device or a consumer name. pwm_put() is used to free the PWM device. Managed -variants of the getter, devm_pwm_get(), devm_of_pwm_get(), -devm_fwnode_pwm_get(), also exist. +variants of the getter, devm_pwm_get() and devm_fwnode_pwm_get(), also exist. After being requested, a PWM has to be configured using:: diff --git a/Documentation/fb/udlfb.rst b/Documentation/fb/udlfb.rst index 732b37db3504..99cfbb7a1922 100644 --- a/Documentation/fb/udlfb.rst +++ b/Documentation/fb/udlfb.rst @@ -86,17 +86,24 @@ Module Options Special configuration for udlfb is usually unnecessary. There are a few options, however. -From the command line, pass options to modprobe -modprobe udlfb fb_defio=0 console=1 shadow=1 +From the command line, pass options to modprobe:: -Or modify options on the fly at /sys/module/udlfb/parameters directory via -sudo nano fb_defio -change the parameter in place, and save the file. + modprobe udlfb fb_defio=0 console=1 shadow=1 -Unplug/replug USB device to apply with new settings +Or change options on the fly by editing +/sys/module/udlfb/parameters/PARAMETER_NAME :: -Or for permanent option, create file like /etc/modprobe.d/udlfb.conf with text -options udlfb fb_defio=0 console=1 shadow=1 + cd /sys/module/udlfb/parameters + ls # to see a list of parameter names + sudo nano PARAMETER_NAME + # change the parameter in place, and save the file. + +Unplug/replug USB device to apply with new settings. + +Or to apply options permanently, create a modprobe configuration file +like /etc/modprobe.d/udlfb.conf with text:: + + options udlfb fb_defio=0 console=1 shadow=1 Accepted boolean options: diff --git a/Documentation/filesystems/caching/backend-api.rst b/Documentation/filesystems/caching/backend-api.rst index d7507becf674..3a199fc50828 100644 --- a/Documentation/filesystems/caching/backend-api.rst +++ b/Documentation/filesystems/caching/backend-api.rst @@ -122,7 +122,7 @@ volumes, calling:: to tell fscache that a volume has been withdrawn. This waits for all outstanding accesses on the volume to complete before returning. -When the the cache is completely withdrawn, fscache should be notified by +When the cache is completely withdrawn, fscache should be notified by calling:: void fscache_relinquish_cache(struct fscache_cache *cache); diff --git a/Documentation/filesystems/ext4/super.rst b/Documentation/filesystems/ext4/super.rst index 268888522e35..0152888cac29 100644 --- a/Documentation/filesystems/ext4/super.rst +++ b/Documentation/filesystems/ext4/super.rst @@ -456,15 +456,15 @@ The ext4 superblock is laid out as follows in * - 0x277 - __u8 - s_lastcheck_hi - - Upper 8 bits of the s_lastcheck_hi field. + - Upper 8 bits of the s_lastcheck field. * - 0x278 - __u8 - s_first_error_time_hi - - Upper 8 bits of the s_first_error_time_hi field. + - Upper 8 bits of the s_first_error_time field. * - 0x279 - __u8 - s_last_error_time_hi - - Upper 8 bits of the s_last_error_time_hi field. + - Upper 8 bits of the s_last_error_time field. * - 0x27A - __u8 - s_pad[2] diff --git a/Documentation/filesystems/f2fs.rst b/Documentation/filesystems/f2fs.rst index d0c09663dae8..17df9a02ccff 100644 --- a/Documentation/filesystems/f2fs.rst +++ b/Documentation/filesystems/f2fs.rst @@ -286,9 +286,8 @@ compress_algorithm=%s:%d Control compress algorithm and its compress level, now, algorithm level range lz4 3 - 16 zstd 1 - 22 -compress_log_size=%u Support configuring compress cluster size, the size will - be 4KB * (1 << %u), 16KB is minimum size, also it's - default size. +compress_log_size=%u Support configuring compress cluster size. The size will + be 4KB * (1 << %u). The default and minimum sizes are 16KB. compress_extension=%s Support adding specified extension, so that f2fs can enable compression on those corresponding files, e.g. if all files with '.ext' has high compression rate, we can set the '.ext' diff --git a/Documentation/filesystems/idmappings.rst b/Documentation/filesystems/idmappings.rst index c1db8748389c..b9b31066aef2 100644 --- a/Documentation/filesystems/idmappings.rst +++ b/Documentation/filesystems/idmappings.rst @@ -661,7 +661,7 @@ idmappings:: mount idmapping: u0:k10000:r10000 Assume a file owned by ``u1000`` is read from disk. The filesystem maps this id -to ``k21000`` according to it's idmapping. This is what is stored in the +to ``k21000`` according to its idmapping. This is what is stored in the inode's ``i_uid`` and ``i_gid`` fields. When the caller queries the ownership of this file via ``stat()`` the kernel diff --git a/Documentation/filesystems/qnx6.rst b/Documentation/filesystems/qnx6.rst index fd13433d362c..523b798f04e7 100644 --- a/Documentation/filesystems/qnx6.rst +++ b/Documentation/filesystems/qnx6.rst @@ -176,7 +176,7 @@ Then userspace. The requirement for a static, fixed preallocated system area comes from how qnx6fs deals with writes. -Each superblock got it's own half of the system area. So superblock #1 +Each superblock got its own half of the system area. So superblock #1 always uses blocks from the lower half while superblock #2 just writes to blocks represented by the upper half bitmap system area bits. diff --git a/Documentation/filesystems/spufs/spufs.rst b/Documentation/filesystems/spufs/spufs.rst index 8a42859bb100..ca0441cbe37e 100644 --- a/Documentation/filesystems/spufs/spufs.rst +++ b/Documentation/filesystems/spufs/spufs.rst @@ -227,7 +227,7 @@ Files from the data buffer, updating the value of the specified signal notification register. The signal notification register will either be replaced with the input data or will be updated to the - bitwise OR or the old value and the input data, depending on the + bitwise OR of the old value and the input data, depending on the contents of the signal1_type, or signal2_type respectively, file. diff --git a/Documentation/filesystems/xfs-delayed-logging-design.rst b/Documentation/filesystems/xfs-delayed-logging-design.rst index 4ef419f54663..6402ab8e370c 100644 --- a/Documentation/filesystems/xfs-delayed-logging-design.rst +++ b/Documentation/filesystems/xfs-delayed-logging-design.rst @@ -100,7 +100,7 @@ transactions together:: ntp = xfs_trans_dup(tp); xfs_trans_commit(tp); - xfs_log_reserve(ntp); + xfs_trans_reserve(ntp); This results in a series of "rolling transactions" where the inode is locked across the entire chain of transactions. Hence while this series of rolling @@ -191,7 +191,7 @@ transaction rolling mechanism to re-reserve space on every transaction roll. We know from the implementation of the permanent transactions how many transaction rolls are likely for the common modifications that need to be made. -For example, and inode allocation is typically two transactions - one to +For example, an inode allocation is typically two transactions - one to physically allocate a free inode chunk on disk, and another to allocate an inode from an inode chunk that has free inodes in it. Hence for an inode allocation transaction, we might set the reservation log count to a value of 2 to indicate @@ -200,7 +200,7 @@ chain. Each time a permanent transaction rolls, it consumes an entire unit reservation. Hence when the permanent transaction is first allocated, the log space -reservation is increases from a single unit reservation to multiple unit +reservation is increased from a single unit reservation to multiple unit reservations. That multiple is defined by the reservation log count, and this means we can roll the transaction multiple times before we have to re-reserve log space when we roll the transaction. This ensures that the common @@ -259,7 +259,7 @@ the next transaction in the sequeunce, but we have none remaining. We cannot sleep during the transaction commit process waiting for new log space to become available, as we may end up on the end of the FIFO queue and the items we have locked while we sleep could end up pinning the tail of the log before there is -enough free space in the log to fulfil all of the pending reservations and +enough free space in the log to fulfill all of the pending reservations and then wake up transaction commit in progress. To take a new reservation without sleeping requires us to be able to take a @@ -551,14 +551,14 @@ Essentially, this shows that an item that is in the AIL can still be modified and relogged, so any tracking must be separate to the AIL infrastructure. As such, we cannot reuse the AIL list pointers for tracking committed items, nor can we store state in any field that is protected by the AIL lock. Hence the -committed item tracking needs it's own locks, lists and state fields in the log +committed item tracking needs its own locks, lists and state fields in the log item. Similar to the AIL, tracking of committed items is done through a new list called the Committed Item List (CIL). The list tracks log items that have been committed and have formatted memory buffers attached to them. It tracks objects in transaction commit order, so when an object is relogged it is removed from -it's place in the list and re-inserted at the tail. This is entirely arbitrary +its place in the list and re-inserted at the tail. This is entirely arbitrary and done to make it easy for debugging - the last items in the list are the ones that are most recently modified. Ordering of the CIL is not necessary for transactional integrity (as discussed in the next section) so the ordering is @@ -615,7 +615,7 @@ those changes into the current checkpoint context. We then initialise a new context and attach that to the CIL for aggregation of new transactions. This allows us to unlock the CIL immediately after transfer of all the -committed items and effectively allow new transactions to be issued while we +committed items and effectively allows new transactions to be issued while we are formatting the checkpoint into the log. It also allows concurrent checkpoints to be written into the log buffers in the case of log force heavy workloads, just like the existing transaction commit code does. This, however, @@ -884,9 +884,9 @@ pin the object the first time it is inserted into the CIL - if it is already in the CIL during a transaction commit, then we do not pin it again. Because there can be multiple outstanding checkpoint contexts, we can still see elevated pin counts, but as each checkpoint completes the pin count will retain the correct -value according to it's context. +value according to its context. -Just to make matters more slightly more complex, this checkpoint level context +Just to make matters slightly more complex, this checkpoint level context for the pin count means that the pinning of an item must take place under the CIL commit/flush lock. If we pin the object outside this lock, we cannot guarantee which context the pin count is associated with. This is because of diff --git a/Documentation/firmware-guide/acpi/enumeration.rst b/Documentation/firmware-guide/acpi/enumeration.rst index dbb03022b127..b9dc0c603f36 100644 --- a/Documentation/firmware-guide/acpi/enumeration.rst +++ b/Documentation/firmware-guide/acpi/enumeration.rst @@ -21,7 +21,7 @@ possible we decided to do following: - Devices behind real busses where there is a connector resource are represented as struct spi_device or struct i2c_device. Note that standard UARTs are not busses so there is no struct uart_device, - although some of them may be represented by sturct serdev_device. + although some of them may be represented by struct serdev_device. As both ACPI and Device Tree represent a tree of devices (and their resources) this implementation follows the Device Tree way as much as @@ -205,7 +205,7 @@ Here is what the ACPI namespace for a SPI slave might look like:: } ... -The SPI device drivers only need to add ACPI IDs in a similar way than with +The SPI device drivers only need to add ACPI IDs in a similar way to the platform device drivers. Below is an example where we add ACPI support to at25 SPI eeprom driver (this is meant for the above ACPI snippet):: @@ -362,7 +362,7 @@ These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0" specifies the path to the controller. In order to use these GPIOs in Linux we need to translate them to the corresponding Linux GPIO descriptors. -There is a standard GPIO API for that and is documented in +There is a standard GPIO API for that and it is documented in Documentation/admin-guide/gpio/. In the above example we can get the corresponding two GPIO descriptors with @@ -538,8 +538,8 @@ information. PCI hierarchy representation ============================ -Sometimes could be useful to enumerate a PCI device, knowing its position on the -PCI bus. +Sometimes it could be useful to enumerate a PCI device, knowing its position on +the PCI bus. For example, some systems use PCI devices soldered directly on the mother board, in a fixed position (ethernet, Wi-Fi, serial ports, etc.). In this conditions it @@ -550,7 +550,7 @@ To identify a PCI device, a complete hierarchical description is required, from the chipset root port to the final device, through all the intermediate bridges/switches of the board. -For example, let us assume to have a system with a PCIe serial port, an +For example, let's assume we have a system with a PCIe serial port, an Exar XR17V3521, soldered on the main board. This UART chip also includes 16 GPIOs and we want to add the property ``gpio-line-names`` [1] to these pins. In this case, the ``lspci`` output for this component is:: @@ -593,8 +593,8 @@ of the chipset bridge (also called "root port") with address:: Bus: 0 - Device: 14 - Function: 1 -To find this information is necessary disassemble the BIOS ACPI tables, in -particular the DSDT (see also [2]):: +To find this information, it is necessary to disassemble the BIOS ACPI tables, +in particular the DSDT (see also [2]):: mkdir ~/tables/ cd ~/tables/ diff --git a/Documentation/firmware-guide/acpi/osi.rst b/Documentation/firmware-guide/acpi/osi.rst index 05869c0045d7..784850adfcb6 100644 --- a/Documentation/firmware-guide/acpi/osi.rst +++ b/Documentation/firmware-guide/acpi/osi.rst @@ -41,26 +41,23 @@ But it is likely that they will all eventually be added. What should an OEM do if they want to support Linux and Windows using the same BIOS image? Often they need to do something different for Linux to deal with how Linux is different from Windows. -Here the BIOS should ask exactly what it wants to know: +In this case, the OEM should create custom ASL to be executed by the +Linux kernel and changes to Linux kernel drivers to execute this custom +ASL. The easiest way to accomplish this is to introduce a device specific +method (_DSM) that is called from the Linux kernel. + +In the past the kernel used to support something like: _OSI("Linux-OEM-my_interface_name") where 'OEM' is needed if this is an OEM-specific hook, and 'my_interface_name' describes the hook, which could be a quirk, a bug, or a bug-fix. -In addition, the OEM should send a patch to upstream Linux -via the linux-acpi@vger.kernel.org mailing list. When that patch -is checked into Linux, the OS will answer "YES" when the BIOS -on the OEM's system uses _OSI to ask if the interface is supported -by the OS. Linux distributors can back-port that patch for Linux -pre-installs, and it will be included by all distributions that -re-base to upstream. If the distribution can not update the kernel binary, -they can also add an acpi_osi=Linux-OEM-my_interface_name -cmdline parameter to the boot loader, as needed. - -If the string refers to a feature where the upstream kernel -eventually grows support, a patch should be sent to remove -the string when that support is added to the kernel. +However this was discovered to be abused by other BIOS vendors to change +completely unrelated code on completely unrelated systems. This prompted +an evaluation of all of it's uses. This uncovered that they aren't needed +for any of the original reasons. As such, the kernel will not respond to +any custom Linux-* strings by default. That was easy. Read on, to find out how to do it wrong. diff --git a/Documentation/gpu/amdgpu/apu-asic-info-table.csv b/Documentation/gpu/amdgpu/apu-asic-info-table.csv new file mode 100644 index 000000000000..98c6988e424e --- /dev/null +++ b/Documentation/gpu/amdgpu/apu-asic-info-table.csv @@ -0,0 +1,8 @@ +Product Name, Code Reference, DCN/DCE version, GC version, VCE/UVD/VCN version, SDMA version +Radeon R* Graphics, CARRIZO/STONEY, DCE 11, 8, VCE 3 / UVD 6, 3 +Ryzen 3000 series / AMD Ryzen Embedded V1*/R1* with Radeon Vega Gfx, RAVEN/PICASSO, DCN 1.0, 9.1.0, VCN 1.0, 4.1.0 +Ryzen 4000 series, RENOIR, DCN 2.1, 9.3, VCN 2.2, 4.1.2 +Ryzen 3000 series / AMD Ryzen Embedded V1*/R1* with Radeon Vega Gfx, RAVEN2, DCN 1.0, 9.2.2, VCN 1.0.1, 4.1.1 +SteamDeck, VANGOGH, DCN 3.0.1, 10.3.1, VCN 3.1.0, 5.2.1 +Ryzen 5000 series, GREEN SARDINE, DCN 2.1, 9.3, VCN 2.2, 4.1.1 +Ryzen 6000 Zen, YELLOW CARP, 3.1.2, 10.3.3, VCN 3.1.1, 5.2.3 diff --git a/Documentation/gpu/amdgpu/dgpu-asic-info-table.csv b/Documentation/gpu/amdgpu/dgpu-asic-info-table.csv new file mode 100644 index 000000000000..84617aa35dab --- /dev/null +++ b/Documentation/gpu/amdgpu/dgpu-asic-info-table.csv @@ -0,0 +1,24 @@ +Product Name, Code Reference, DCN/DCE version, GC version, VCN version, SDMA version +AMD Radeon (TM) HD 8500M/ 8600M /M200 /M320 /M330 /M335 Series, HAINAN, --, 6, --, -- +AMD Radeon HD 7800 /7900 /FireGL Series, TAHITI, DCE 6, 6, VCE 1 / UVD 3, -- +AMD Radeon R7 (TM|HD) M265 /M370 /8500M /8600 /8700 /8700M, OLAND, DCE 6, 6, VCE 1 / UVD 3, -- +AMD Radeon (TM) (HD|R7) 7800 /7970 /8800 /8970 /370/ Series, PITCAIRN, DCE 6, 6, VCE 1 / UVD 3, -- +AMD Radeon (TM|R7|R9|HD) E8860 /M360 /7700 /7800 /8800 /9000(M) /W4100 Series, VERDE, DCE 6, 6, VCE 1 / UVD 3, -- +AMD Radeon HD M280X /M380 /7700 /8950 /W5100, BONAIRE, DCE 8, 7, VCE 2 / UVD 4.2, 1 +AMD Radeon (R9|TM) 200 /390 /W8100 /W9100 Series, HAWAII, DCE 8, 7, VCE 2 / UVD 4.2, 1 +AMD Radeon (TM) R(5|7) M315 /M340 /M360, TOPAZ, *, 8, --, 2 +AMD Radeon (TM) R9 200 /380 /W7100 /S7150 /M390 /M395 Series, TONGA, DCE 10, 8, VCE 3 / UVD 5, 3 +AMD Radeon (FirePro) (TM) R9 Fury Series, FIJI, DCE 10, 8, VCE 3 / UVD 6, 3 +Radeon RX 470 /480 /570 /580 /590 Series - AMD Radeon (TM) (Pro WX) 5100 /E9390 /E9560 /E9565 /V7350 /7100 /P30PH, POLARIS10, DCE 11.2, 8, VCE 3.4 / UVD 6.3, 3 +Radeon (TM) (RX|Pro WX) E9260 /460 /V5300X /550 /560(X) Series, POLARIS11, DCE 11.2, 8, VCE 3.4 / UVD 6.3, 3 +Radeon (RX/Pro) 500 /540(X) /550 /640 /WX2100 /WX3100 /WX200 Series, POLARIS12, DCE 11.2, 8, VCE 3.4 / UVD 6.3, 3 +Radeon (RX|TM) (PRO|WX) Vega /MI25 /V320 /V340L /8200 /9100 /SSG MxGPU, VEGA10, DCE 12, 9.0.1, VCE 4.0.0 / UVD 7.0.0, 4.0.0 +AMD Radeon (Pro) VII /MI50 /MI60, VEGA20, DCE 12, 9.4.0, VCE 4.1.0 / UVD 7.2.0, 4.2.0 +MI100, ARCTURUS, *, 9.4.1, VCN 2.5.0, 4.2.2 +MI200, ALDEBARAN, *, 9.4.2, VCN 2.6.0, 4.4.0 +AMD Radeon (RX|Pro) 5600(M|XT) /5700 (M|XT|XTB) /W5700, NAVI10, DCN 2.0.0, 10.1.10, VCN 2.0.0, 5.0.0 +AMD Radeon (Pro) 5300 /5500XTB/5500(XT|M) /W5500M /W5500, NAVI14, DCN 2.0.0, 10.1.1, VCN 2.0.2, 5.0.2 +AMD Radeon RX 6800(XT) /6900(XT) /W6800, SIENNA_CICHLID, DCN 3.0.0, 10.3.0, VCN 3.0.0, 5.2.0 +AMD Radeon RX 6700 XT / 6800M / 6700M, NAVY_FLOUNDER, DCN 3.0.0, 10.3.2, VCN 3.0.0, 5.2.2 +AMD Radeon RX 6600(XT) /6600M /W6600 /W6600M, DIMGREY_CAVEFISH, DCN 3.0.2, 10.3.4, VCN 3.0.16, 5.2.4 +AMD Radeon RX 6500M /6300M /W6500M /W6300M, BEIGE_GOBY, DCN 3.0.3, 10.3.5, VCN 3.0.33, 5.2.5 diff --git a/Documentation/gpu/amdgpu/display/dc-glossary.rst b/Documentation/gpu/amdgpu/display/dc-glossary.rst index 116f5f0942fd..0b0ffd428dd2 100644 --- a/Documentation/gpu/amdgpu/display/dc-glossary.rst +++ b/Documentation/gpu/amdgpu/display/dc-glossary.rst @@ -170,7 +170,7 @@ consider asking in the amdgfx and update this page. MC Memory Controller - MPC + MPC/MPCC Multiple pipes and plane combine MPO diff --git a/Documentation/gpu/amdgpu/display/dcn-overview.rst b/Documentation/gpu/amdgpu/display/dcn-overview.rst index f98624d7828e..9fea6500448b 100644 --- a/Documentation/gpu/amdgpu/display/dcn-overview.rst +++ b/Documentation/gpu/amdgpu/display/dcn-overview.rst @@ -124,6 +124,65 @@ depth format), bit-depth reduction/dithering would kick in. In OPP, we would also apply a regamma function to introduce the gamma removed earlier back. Eventually, we output data in integer format at DIO. +AMD Hardware Pipeline +--------------------- + +When discussing graphics on Linux, the **pipeline** term can sometimes be +overloaded with multiple meanings, so it is important to define what we mean +when we say **pipeline**. In the DCN driver, we use the term **hardware +pipeline** or **pipeline** or just **pipe** as an abstraction to indicate a +sequence of DCN blocks instantiated to address some specific configuration. DC +core treats DCN blocks as individual resources, meaning we can build a pipeline +by taking resources for all individual hardware blocks to compose one pipeline. +In actuality, we can't connect an arbitrary block from one pipe to a block from +another pipe; they are routed linearly, except for DSC, which can be +arbitrarily assigned as needed. We have this pipeline concept for trying to +optimize bandwidth utilization. + +.. kernel-figure:: pipeline_4k_no_split.svg + +Additionally, let's take a look at parts of the DTN log (see +'Documentation/gpu/amdgpu/display/dc-debug.rst' for more information) since +this log can help us to see part of this pipeline behavior in real-time:: + + HUBP: format addr_hi width height ... + [ 0]: 8h 81h 3840 2160 + [ 1]: 0h 0h 0 0 + [ 2]: 0h 0h 0 0 + [ 3]: 0h 0h 0 0 + [ 4]: 0h 0h 0 0 + ... + MPCC: OPP DPP ... + [ 0]: 0h 0h ... + +The first thing to notice from the diagram and DTN log it is the fact that we +have different clock domains for each part of the DCN blocks. In this example, +we have just a single **pipeline** where the data flows from DCHUB to DIO, as +we intuitively expect. Nonetheless, DCN is flexible, as mentioned before, and +we can split this single pipe differently, as described in the below diagram: + +.. kernel-figure:: pipeline_4k_split.svg + +Now, if we inspect the DTN log again we can see some interesting changes:: + + HUBP: format addr_hi width height ... + [ 0]: 8h 81h 1920 2160 ... + ... + [ 4]: 0h 0h 0 0 ... + [ 5]: 8h 81h 1920 2160 ... + ... + MPCC: OPP DPP ... + [ 0]: 0h 0h ... + [ 5]: 0h 5h ... + +From the above example, we now split the display pipeline into two vertical +parts of 1920x2160 (i.e., 3440x2160), and as a result, we could reduce the +clock frequency in the DPP part. This is not only useful for saving power but +also to better handle the required throughput. The idea to keep in mind here is +that the pipe configuration can vary a lot according to the display +configuration, and it is the DML's responsibility to set up all required +configuration parameters for multiple scenarios supported by our hardware. + Global Sync ----------- diff --git a/Documentation/gpu/amdgpu/display/dcn2_cm_drm_current.svg b/Documentation/gpu/amdgpu/display/dcn2_cm_drm_current.svg new file mode 100644 index 000000000000..315ffc5a1a4b --- /dev/null +++ b/Documentation/gpu/amdgpu/display/dcn2_cm_drm_current.svg @@ -0,0 +1,1370 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> + +<svg + version="1.1" + id="svg2019" + width="1702" + height="1845" + viewBox="0 0 1702 1845" + sodipodi:docname="dcn2_cm_drm_current.svg" + inkscape:version="1.1.2 (0a00cf5339, 2022-02-04)" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns="http://www.w3.org/2000/svg" + xmlns:svg="http://www.w3.org/2000/svg"> + <defs + id="defs2023" /> + <sodipodi:namedview + id="namedview2021" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageshadow="2" + inkscape:pageopacity="0.0" + inkscape:pagecheckerboard="0" + showgrid="false" + inkscape:zoom="0.56413987" + inkscape:cx="1003.2973" + inkscape:cy="691.31792" + inkscape:window-width="1920" + inkscape:window-height="1011" + inkscape:window-x="0" + inkscape:window-y="0" + inkscape:window-maximized="1" + inkscape:current-layer="g2025" /> + <g + inkscape:groupmode="layer" + inkscape:label="Image" + id="g2025"> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-opacity:1" + id="rect34" + width="208.83351" + height="486.09872" + x="0.90158081" + y="132.77872" /> + <rect + style="fill:#fad7ac;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1019" + width="126.38867" + height="55.320732" + x="25.960823" + y="188.06937" /> + <rect + style="fill:#d0cee2;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1021" + width="126.38867" + height="55.320732" + x="25.960823" + y="346.06937" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1103" + width="126.38867" + height="55.320732" + x="25.960823" + y="266.06937" /> + <rect + style="fill:#f9f7ed;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1105" + width="126.38867" + height="55.320732" + x="25.960823" + y="426.06937" /> + <rect + style="fill:#e6e6e6;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1107" + width="126.38867" + height="55.320732" + x="25.960823" + y="506.06934" /> + <path + d="m 402.61883,171.88069 c 0.025,10.97895 0.01,1001.03791 0.049,1012.01891 2.5462,-1.1592 5.0637,-2.3779 7.6202,-3.5187 -2.7411,4.8298 -5.4987,9.6453 -8.2624,14.4607 -2.7925,-4.8257 -5.5993,-9.6453 -8.3856,-14.4751 2.6221,1.1736 5.2217,2.3923 7.8398,3.5721 0,-10.8825 -0.035,-1000.84096 -0.031,-1011.72348 0.053,-0.30366 -0.2175,-0.50268 -0.3652,-0.72837 l 1.5347,0.39394 z" + id="path381056" + sodipodi:nodetypes="cccccccccc" + style="stroke-width:0.205176" + inkscape:transform-center-x="-325.50819" + inkscape:transform-center-y="-121.97185" /> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-opacity:1" + id="rect1131" + width="239.47592" + height="1015.9909" + x="298.65631" + y="82.399658" /> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-width:1.27861;stroke-opacity:1" + id="rect1133" + width="340.44653" + height="525.77448" + x="298.79562" + y="1142.5299" /> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-opacity:1" + id="rect1237" + width="284.00113" + height="945.41412" + x="827.75012" + y="82.880798" + inkscape:connector-avoid="true" /> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-opacity:1" + id="rect1239" + width="239.37569" + height="179.03308" + x="1356.9507" + y="98.758331" /> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-width:1.00744;stroke-opacity:1" + id="rect1241" + width="239.4184" + height="713.64905" + x="1356.9543" + y="307.7951" + inkscape:connector-avoid="true" /> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-opacity:1" + id="rect1345" + width="330.32059" + height="409.44757" + x="1363.8723" + y="1147.7572" /> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-opacity:1" + id="rect1347" + width="369.8941" + height="682.32245" + x="825.72528" + y="1146.6448" + inkscape:connector-avoid="true" /> + <rect + style="fill:#f9f7ed;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1349" + width="163.95746" + height="40.144867" + x="1389.9988" + y="190.80583" /> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-width:0.964132;stroke-opacity:1" + id="rect1619" + width="271.99091" + height="42.038273" + x="1393.981" + y="1197.161" + inkscape:connector-avoid="true" /> + <path + d="m 1469.3028,1238.8328 c 0.025,10.9789 0.01,175.0378 0.049,186.0188 2.5462,-1.1592 5.0637,-2.3779 7.6202,-3.5187 -2.7411,4.8298 -5.4987,9.6453 -8.2624,14.4607 -2.7925,-4.8257 -5.5993,-9.6453 -8.3856,-14.4751 2.6221,1.1736 5.2217,2.3923 7.8398,3.5721 0,-10.8825 -0.035,-174.8409 -0.031,-185.7234 0.053,-0.3037 -0.2175,-0.5027 -0.3652,-0.7284 l 1.5347,0.394 z" + id="path106-1" + sodipodi:nodetypes="cccccccccc" + style="stroke-width:0.205176" + inkscape:transform-center-x="-325.50819" + inkscape:transform-center-y="-121.97185" /> + <path + d="m 407.4759,1238.4728 c 0.025,10.9789 0.01,291.0378 0.049,302.0188 2.5462,-1.1592 5.0637,-2.3779 7.6202,-3.5187 -2.7411,4.8298 -5.4987,9.6453 -8.2624,14.4607 -2.7925,-4.8257 -5.5993,-9.6453 -8.3856,-14.4751 2.6221,1.1736 5.2217,2.3923 7.8398,3.5721 0,-10.8825 -0.035,-290.8409 -0.031,-301.7234 0.053,-0.3037 -0.2175,-0.5027 -0.3652,-0.7284 l 1.5347,0.394 z" + id="path106-1-7" + sodipodi:nodetypes="cccccccccc" + style="stroke-width:0.205176" + inkscape:transform-center-x="-325.50819" + inkscape:transform-center-y="-121.97185" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1623" + width="137.32646" + height="41.782684" + x="1396.3848" + y="1268.2837" + inkscape:connector-avoid="true" /> + <rect + style="fill:#fad7ac;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1705" + width="137.32646" + height="41.782684" + x="1396.3848" + y="1348.2837" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1707" + width="137.32646" + height="41.782684" + x="1396.3848" + y="1432.2837" /> + <rect + style="fill:#f9f7ed;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1731" + width="222.34483" + height="44.64616" + x="867.36292" + y="190.42665" + inkscape:connector-avoid="true" /> + <rect + style="fill:#f9f7ed;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1813" + width="222.34483" + height="44.64616" + x="867.36292" + y="254.42664" + inkscape:connector-avoid="true" /> + <rect + style="fill:#f9f7ed;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1815" + width="222.34483" + height="44.64616" + x="867.36292" + y="318.42664" + inkscape:connector-avoid="true" /> + <rect + style="fill:#fad7ac;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1817" + width="222.34483" + height="44.64616" + x="867.36292" + y="412.42664" + inkscape:connector-avoid="true" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1819" + width="222.34483" + height="44.64616" + x="867.36292" + y="560.42664" /> + <rect + style="fill:#e6e6e6;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1821" + width="222.34483" + height="44.64616" + x="867.36292" + y="674.42664" + inkscape:connector-avoid="true" /> + <rect + style="fill:#fad7ac;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1823" + width="222.34483" + height="44.64616" + x="867.36292" + y="744.42664" + inkscape:connector-avoid="true" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1825" + width="222.34483" + height="44.64616" + x="867.36292" + y="820.42664" + inkscape:connector-avoid="true" /> + <rect + style="fill:#d0cee2;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1827" + width="222.34483" + height="44.64616" + x="867.36292" + y="890.42664" + inkscape:connector-avoid="true" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1829" + width="222.34483" + height="44.64616" + x="867.36292" + y="956.42664" + inkscape:connector-avoid="true" /> + <rect + style="fill:#fad7ac;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1831" + width="222.34483" + height="44.64616" + x="867.36292" + y="1256.4268" /> + <rect + style="fill:#d0cee2;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1833" + width="222.34483" + height="44.64616" + x="867.36292" + y="1402.4268" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1915" + width="222.34483" + height="44.64616" + x="867.36292" + y="1330.4268" + inkscape:connector-avoid="true" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1917" + width="222.34483" + height="44.64616" + x="867.36292" + y="1478.4268" /> + <rect + style="fill:#fad7ac;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1919" + width="222.34483" + height="44.64616" + x="867.36292" + y="1548.4268" /> + <rect + style="fill:#eeeeee;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1921" + width="222.34483" + height="44.64616" + x="867.36292" + y="1614.4268" /> + <rect + style="fill:#eeeeee;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1923" + width="222.34483" + height="44.64616" + x="867.36292" + y="1686.4268" /> + <rect + style="fill:#eeeeee;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1925" + width="222.34483" + height="44.64616" + x="867.36292" + y="1754.4268" /> + <rect + style="fill:#f9f7ed;fill-opacity:1;stroke:#000000;stroke-width:0.872749;stroke-opacity:1" + id="rect1925-3" + width="169.23357" + height="44.678963" + x="325.21747" + y="134.37756" /> + <rect + style="fill:#fad7ac;fill-opacity:1;stroke:#000000;stroke-width:0.872749;stroke-opacity:1" + id="rect1954" + width="169.23357" + height="44.678963" + x="325.21747" + y="276.37756" + inkscape:connector-avoid="true" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-width:0.87333333;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:none" + id="rect1956" + width="168.66573" + height="122.14091" + x="325.50134" + y="358.6615" + inkscape:connector-avoid="true" /> + <rect + style="fill:#e6e6e6;fill-opacity:1;stroke:#000000;stroke-width:0.872749;stroke-opacity:1" + id="rect1958" + width="169.23357" + height="44.678963" + x="325.21747" + y="672.37756" /> + <rect + style="fill:#fad7ac;fill-opacity:1;stroke:#000000;stroke-width:0.872749;stroke-opacity:1" + id="rect1960" + width="169.23357" + height="44.678963" + x="325.21747" + y="744.37756" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-width:0.965912;stroke-opacity:1" + id="rect1962" + width="169.14041" + height="54.756817" + x="325.26404" + y="814.42413" + inkscape:connector-avoid="true" /> + <rect + style="fill:#d0cee2;fill-opacity:1;stroke:#000000;stroke-width:0.965912;stroke-opacity:1" + id="rect1964" + width="169.14041" + height="54.756817" + x="325.26404" + y="886.42413" + inkscape:connector-avoid="true" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-width:0.965912;stroke-opacity:1" + id="rect1966" + width="169.14041" + height="54.756817" + x="325.26404" + y="952.42413" + inkscape:connector-avoid="true" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-width:1.02091;stroke-opacity:1" + id="rect2428" + width="169.0854" + height="61.19017" + x="325.29156" + y="1468.4518" /> + <rect + style="fill:#fad7ac;fill-opacity:1;stroke:#000000;stroke-width:0.839627;stroke-opacity:1" + id="rect2430" + width="169.26669" + height="41.344128" + x="325.20093" + y="1550.3611" /> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-width:1.13491;stroke-opacity:1" + id="rect2432" + width="287.86237" + height="44.416805" + x="325.34854" + y="1194.5088" /> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-width:1.13102;stroke-opacity:1" + id="rect2434" + width="285.86655" + height="44.4207" + x="867.34656" + y="1194.5068" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2509" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2511" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2513" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2515" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2517" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2519" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2521" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2523" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2525" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2527" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2529" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2531" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="m 442.80064,179.02883 0.91401,36.01283 423.64827,-2.29193" + id="path6876" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1925-3" + inkscape:connection-end="#rect1731" + sodipodi:nodetypes="ccc" /> + <path + style="display:inline;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="m 494.45103,156.71704 205.18886,-0.43622 0.59548,162.1112 167.12755,0.0346" + id="path6878" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1925-3" + sodipodi:nodetypes="cccc" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="m 447.83425,321.05653 v 19.69319 h 419.52867" + id="path7294" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1954" + inkscape:connection-end="#rect1815" + sodipodi:nodetypes="ccc" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="M 494.45103,298.71704 H 659.10058 V 434.74972 H 867.36292" + id="path7296" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-end="#rect1817" + inkscape:connection-start="#rect1954" + sodipodi:nodetypes="cccc" /> + <path + style="display:inline;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="m 867.36292,560.42664 -422.77356,1.33638 0.45008,-79.26417" + id="path7720" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + sodipodi:nodetypes="ccc" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="M 494.45103,696.74972 H 867.36292" + id="path7726" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1958" + inkscape:connection-end="#rect1821" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="M 867.36292,766.74972 H 494.45103" + id="path7728" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1823" + inkscape:connection-end="#rect1960" /> + <path + style="display:inline;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="M 494.45105,789.05652 H 657.82418 V 1278.7498 H 867.36292" + id="path7730" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-end="#rect1831" + sodipodi:nodetypes="cccc" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="m 494.40445,841.80254 h 167.41973 v 0.94718 h 205.53874" + id="path8140" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1962" + inkscape:connection-end="#rect1825" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="m 494.40445,913.80254 h 167.41973 v -1.05282 h 205.53874" + id="path8142" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1964" + inkscape:connection-end="#rect1827" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="m 494.40445,979.80254 h 167.41973 v -1.05282 h 205.53874" + id="path8144" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1966" + inkscape:connection-end="#rect1829" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="M 494.37697,1500.7498 H 867.36292" + id="path8150" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect2428" + inkscape:connection-end="#rect1917" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="m 494.46762,1570.7498 h 372.8953" + id="path8152" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect2430" + inkscape:connection-end="#rect1919" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="M 1396.3848,1289.175 H 1288.1445 V 582.74972 h -198.4368" + id="path8154" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1623" + inkscape:connection-end="#rect1819" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="m 1396.3848,1369.175 -159.2837,-1.364 0.5816,-88.2579 -147.975,-0.8033" + id="path8462" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1705" + inkscape:connection-end="#rect1831" + sodipodi:nodetypes="cccc" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="m 1089.7077,1500.7498 h 375.3403 v -26.6834" + id="path8668" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1917" + inkscape:connection-end="#rect1707" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="M 1389.9988,212.74973 H 1089.7077" + id="path8672" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1349" + inkscape:connection-end="#rect1731" /> + <path + style="display:inline;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="M 1389.9988,230.9507 H 1223.331 v 109.79902 h -133.6233" + id="path8674" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-end="#rect1815" + sodipodi:nodetypes="cccc" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="58.63356" + y="69.574417" + id="text28675"><tspan + sodipodi:role="line" + id="tspan28673" + x="58.63356" + y="69.574417" /></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="56.388252" + y="221.86568" + id="text31913"><tspan + sodipodi:role="line" + id="tspan31911" + x="56.388252" + y="221.86568">Matrix</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="53.441296" + y="300.866" + id="text38843"><tspan + sodipodi:role="line" + id="tspan38841" + x="53.441296" + y="300.866">1D LUT</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="53.441296" + y="378.866" + id="text41049"><tspan + sodipodi:role="line" + id="tspan41047" + x="53.441296" + y="378.866">3D LUT</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="40.831493" + y="460.87411" + id="text45037"><tspan + sodipodi:role="line" + id="tspan45035" + x="40.831493" + y="460.87411" + style="font-size:18.6667px">Unpacking</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="62.130371" + y="540.68872" + id="text49945"><tspan + sodipodi:role="line" + id="tspan49943" + x="62.130371" + y="540.68872" + style="font-size:18.6667px">Other</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1423.2806" + y="128.08769" + id="text55719"><tspan + sodipodi:role="line" + id="tspan55717" + x="1423.2806" + y="128.08769" + style="font-size:18.6667px">drm_framebuffer</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1439.9988" + y="218.74973" + id="text62479"><tspan + sodipodi:role="line" + id="tspan62477" + x="1439.9988" + y="218.74973" + style="font-size:18.6667px">format</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1475.2806" + y="340.08771" + id="text64465"><tspan + sodipodi:role="line" + id="tspan64463" + x="1475.2806" + y="340.08771" + style="font-size:18.6667px">drm_plane</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1589.2806" + y="1178.0876" + id="text64469"><tspan + sodipodi:role="line" + id="tspan64467" + x="1589.2806" + y="1178.0876" + style="font-size:18.6667px">drm_crtc</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="872.23993" + y="1172.4491" + id="text64469-9"><tspan + sodipodi:role="line" + id="tspan64467-2" + x="872.23993" + y="1172.4491" + style="font-size:18.6667px">Stream</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="328.26071" + y="1175.6371" + id="text64469-9-2"><tspan + sodipodi:role="line" + id="tspan64467-2-8" + x="328.26071" + y="1175.6371" + style="font-size:18.6667px">MPC</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="330.14737" + y="114.41869" + id="text64469-9-9"><tspan + sodipodi:role="line" + id="tspan64467-2-7" + x="330.14737" + y="114.41869" + style="font-size:18.6667px">DPP</tspan></text> + <path + d="m 1488.3608,401.47792 c 0.025,10.97895 0.01,773.03788 0.049,784.01888 2.5462,-1.1592 5.0637,-2.3779 7.6202,-3.5187 -2.7411,4.8298 -5.4987,9.6453 -8.2624,14.4607 -2.7925,-4.8257 -5.5993,-9.6453 -8.3856,-14.4751 2.6221,1.1736 5.2217,2.3923 7.8398,3.5721 0,-10.8825 -0.035,-772.84093 -0.031,-783.72345 0.053,-0.30366 -0.2175,-0.50268 -0.3652,-0.72837 l 1.5347,0.39394 z" + id="path106" + sodipodi:nodetypes="cccccccccc" + style="stroke-width:0.205176" + inkscape:transform-center-x="-325.50819" + inkscape:transform-center-y="-121.97185" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1495.9988" + y="1224.7498" + id="text78849"><tspan + sodipodi:role="line" + id="tspan78847" + x="1495.9988" + y="1224.7498" + style="font-size:18.6667px">Blender</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1417.9988" + y="1294.7498" + id="text78853"><tspan + sodipodi:role="line" + id="tspan78851" + x="1417.9988" + y="1294.7498" + style="font-size:18.6667px">Degamma</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1451.9988" + y="1376.7498" + id="text78857"><tspan + sodipodi:role="line" + id="tspan78855" + x="1451.9988" + y="1376.7498" + style="font-size:18.6667px">CTM</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1427.9988" + y="1458.7498" + id="text78861"><tspan + sodipodi:role="line" + id="tspan78859" + x="1427.9988" + y="1458.7498" + style="font-size:18.6667px">Gamma</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="949.99878" + y="218.74973" + id="text104653"><tspan + sodipodi:role="line" + id="tspan104651" + x="949.99878" + y="218.74973" + style="font-size:18.6667px">format</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="911.99878" + y="284.74973" + id="text104657"><tspan + sodipodi:role="line" + id="tspan104655" + x="911.99878" + y="284.74973" + style="font-size:18.6667px">bias_and_scale</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="887.99878" + y="346.74973" + id="text104661"><tspan + sodipodi:role="line" + id="tspan104659" + x="887.99878" + y="346.74973" + style="font-size:18.6667px">color space matrix</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="871.99878" + y="442.74973" + id="text104665"><tspan + sodipodi:role="line" + id="tspan104663" + x="871.99878" + y="442.74973" + style="font-size:18.6667px">input_csc_color_matrix</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="905.99878" + y="586.74976" + id="text125075"><tspan + sodipodi:role="line" + id="tspan125073" + x="905.99878" + y="586.74976" + style="font-size:18.6667px">in_transfer_func</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="945.0083" + y="702.85938" + id="text117309"><tspan + sodipodi:role="line" + id="tspan117307" + x="945.0083" + y="702.85938" + style="font-size:18.6667px">hdr_mult</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="874.5556" + y="773.42615" + id="text117309-6"><tspan + sodipodi:role="line" + id="tspan117307-7" + x="874.5556" + y="773.42615" + style="font-size:18.6667px">gamut_remap_matrix</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="913.72528" + y="846.55896" + id="text117309-5"><tspan + sodipodi:role="line" + id="tspan117307-3" + x="913.72528" + y="846.55896" + style="font-size:18.6667px">in_shaper_func</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="937.72528" + y="918.25787" + id="text117309-56"><tspan + sodipodi:role="line" + id="tspan117307-2" + x="937.72528" + y="918.25787" + style="font-size:18.6667px">lut3d_func</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="945.9895" + y="986.10767" + id="text117309-9"><tspan + sodipodi:role="line" + id="tspan117307-1" + x="945.9895" + y="986.10767" + style="font-size:18.6667px">blend_tf</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="975.91803" + y="1224.5564" + id="text137434"><tspan + sodipodi:role="line" + id="tspan137432" + x="975.91803" + y="1224.5564" + style="font-size:18.6667px">Blender</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="879.31372" + y="1283.4249" + id="text137434-2"><tspan + sodipodi:role="line" + id="tspan137432-7" + x="879.31372" + y="1283.4249" + style="font-size:18.6667px">gamut_remap_matrix</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="925.31372" + y="1359.2747" + id="text137434-0"><tspan + sodipodi:role="line" + id="tspan137432-9" + x="925.31372" + y="1359.2747" + style="font-size:18.6667px">func_shaper</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="930.33252" + y="1430.2566" + id="text137434-3"><tspan + sodipodi:role="line" + id="tspan137432-6" + x="930.33252" + y="1430.2566" + style="font-size:18.6667px">lut3d_func</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="900.18158" + y="1504.6725" + id="text137434-06"><tspan + sodipodi:role="line" + id="tspan137432-2" + x="900.18158" + y="1504.6725" + style="font-size:18.6667px">out_transfer_func</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="904.0307" + y="1575.8053" + id="text137434-6"><tspan + sodipodi:role="line" + id="tspan137432-1" + x="904.0307" + y="1575.8053" + style="font-size:18.6667px">csc_color_matrix</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="903.16278" + y="1642.1078" + id="text137434-8"><tspan + sodipodi:role="line" + id="tspan137432-79" + x="903.16278" + y="1642.1078" + style="font-size:18.6667px">bit_depth_param</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="939.31372" + y="1713.8068" + id="text137434-20"><tspan + sodipodi:role="line" + id="tspan137432-23" + x="939.31372" + y="1713.8068" + style="font-size:18.6667px">clamping</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="894.0307" + y="1782.5244" + id="text137434-7"><tspan + sodipodi:role="line" + id="tspan137432-5" + x="894.0307" + y="1782.5244" + style="font-size:18.6667px">output_color_space</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="869.63062" + y="117.7968" + id="text176429"><tspan + sodipodi:role="line" + id="tspan176427" + x="869.63062" + y="117.7968" + style="font-size:18.6667px">Plane</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="27.605465" + y="162.20587" + id="text176429-2"><tspan + sodipodi:role="line" + id="tspan176427-0" + x="27.605465" + y="162.20587" + style="font-size:18.6667px">Legend</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="298.63959" + y="59.293999" + id="text176429-9"><tspan + sodipodi:role="line" + id="tspan176427-2" + x="298.63959" + y="59.293999" + style="font-size:18.6667px">DCN 2.0</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="826.65735" + y="59.458061" + id="text176429-66"><tspan + sodipodi:role="line" + id="tspan176427-4" + x="826.65735" + y="59.458061" + style="font-size:18.6667px">DC Interface</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1362.9948" + y="59.458061" + id="text176429-95"><tspan + sodipodi:role="line" + id="tspan176427-04" + x="1362.9948" + y="59.458061" + style="font-size:18.6667px">DRM Interface</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="867.34656" + y="1194.5068" + id="text184728"><tspan + sodipodi:role="line" + id="tspan184726" + x="867.34656" + y="1194.5068" /></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="389.01593" + y="159.8909" + id="text64469-9-3"><tspan + sodipodi:role="line" + id="tspan64467-2-6" + x="389.01593" + y="159.8909" + style="font-size:18.6667px">CNVC</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="365.88379" + y="303.59048" + id="text64469-9-1"><tspan + sodipodi:role="line" + id="tspan64467-2-2" + x="365.88379" + y="303.59048" + style="font-size:18.6667px">Input CSC</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="409.06488" + y="404.95001" + id="text64469-9-93"><tspan + sodipodi:role="line" + id="tspan64467-2-1" + x="409.06488" + y="404.95001" + style="font-size:18.6667px;text-align:center;text-anchor:middle">DeGamma</tspan><tspan + sodipodi:role="line" + x="409.06488" + y="428.28339" + style="font-size:18.6667px;text-align:center;text-anchor:middle" + id="tspan233797">RAM and ROM</tspan><tspan + sodipodi:role="line" + x="409.06488" + y="451.61676" + style="font-size:10.6667px;text-align:center;text-anchor:middle" + id="tspan242597">(sRGB, BT2020</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="351.16684" + y="700.34918" + id="text64469-9-0"><tspan + sodipodi:role="line" + id="tspan64467-2-3" + x="351.16684" + y="700.34918" + style="font-size:18.6667px">HDR Multiply</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="345.16684" + y="771.33112" + id="text64469-9-6"><tspan + sodipodi:role="line" + id="tspan64467-2-10" + x="345.16684" + y="771.33112" + style="font-size:18.6667px">Gamut Remap</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="412.5184" + y="836.04877" + id="text64469-9-63"><tspan + sodipodi:role="line" + id="tspan64467-2-20" + x="412.5184" + y="836.04877" + style="font-size:18.6667px;text-align:center;text-anchor:middle">Shaper LUT</tspan><tspan + sodipodi:role="line" + x="412.5184" + y="859.38214" + style="font-size:18.6667px;text-align:center;text-anchor:middle" + id="tspan222533">RAM</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="413.54086" + y="908.61554" + id="text64469-9-61"><tspan + sodipodi:role="line" + id="tspan64467-2-55" + x="413.54086" + y="908.61554" + style="font-size:18.6667px;text-align:center;text-anchor:middle">3D LUT</tspan><tspan + sodipodi:role="line" + x="413.54086" + y="931.94891" + style="font-size:18.6667px;text-align:center;text-anchor:middle" + id="tspan221121">RAM</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="344.0347" + y="985.33319" + id="text64469-9-47"><tspan + sodipodi:role="line" + id="tspan64467-2-65" + x="344.0347" + y="985.33319" + style="font-size:18.6667px">Blend Gamma</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="433.84625" + y="1223.411" + id="text64469-9-69"><tspan + sodipodi:role="line" + id="tspan64467-2-37" + x="433.84625" + y="1223.411" + style="font-size:18.6667px">Blender</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="408.64996" + y="1492.8102" + id="text64469-9-8"><tspan + sodipodi:role="line" + id="tspan64467-2-84" + x="408.64996" + y="1492.8102" + style="font-size:18.6667px;text-align:center;text-anchor:middle">Gamma</tspan><tspan + sodipodi:role="line" + x="408.64996" + y="1516.1436" + style="font-size:18.6667px;text-align:center;text-anchor:middle" + id="tspan197733">RAM</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="385.46863" + y="1575.2261" + id="text64469-9-31"><tspan + sodipodi:role="line" + id="tspan64467-2-49" + x="385.46863" + y="1575.2261" + style="font-size:18.6667px">OCSC</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1356.5106" + y="53.140579" + id="text273287"><tspan + sodipodi:role="line" + id="tspan273285" + x="1356.5106" + y="53.140579" /></text> + <rect + style="fill:#f9f7ed;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1411" + width="177.28049" + height="38.940468" + x="1392.2576" + y="459.24118" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1411.7203" + y="485.93231" + id="text78841"><tspan + sodipodi:role="line" + id="tspan78839" + x="1411.7203" + y="485.93231" + style="font-size:18.6667px">color_encoding</tspan></text> + <rect + style="fill:#f9f7ed;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1515" + width="175.11876" + height="43.239407" + x="1393.7493" + y="525.6983" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:17.3333px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1399.212" + y="553.44904" + id="text78845"><tspan + sodipodi:role="line" + id="tspan78843" + x="1399.212" + y="553.44904">pixel_blend_mode</tspan></text> + <rect + style="fill:#f9f7ed;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect371322" + width="177.28049" + height="38.940468" + x="1391.6781" + y="385.61713" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1427.5771" + y="409.29523" + id="text78837"><tspan + sodipodi:role="line" + id="tspan78835" + x="1427.5771" + y="409.29523" + style="font-size:18.6667px">color_range</tspan></text> + <path + d="m 1469.6815,1334.9145 c 3.2597,-1.4841 6.4827,-3.0444 9.7556,-4.5049 -3.5093,6.1834 -7.0396,12.3483 -10.5778,18.5131 -3.575,-6.178 -7.1683,-12.3481 -10.7354,-18.5314 3.3569,1.5025 6.685,3.0627 10.0367,4.5731 0,0 0,0 1.5209,-0.05 z" + id="path371636-7" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 1467.8882,1256.0056 c 3.2597,-1.4841 6.4827,-3.0443 9.7556,-4.5048 -3.5093,6.1833 -7.0396,12.3482 -10.5778,18.5131 -3.575,-6.178 -7.1683,-12.3482 -10.7354,-18.5315 3.3569,1.5025 6.685,3.0628 10.0367,4.5731 0,0 0,0 1.5209,-0.05 z" + id="path371636-7-2" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 1487.6154,441.80981 c 3.2597,-1.48411 6.4827,-3.04435 9.7556,-4.50482 -3.5093,6.18331 -7.0396,12.34823 -10.5778,18.51307 -3.575,-6.17798 -7.1683,-12.34815 -10.7354,-18.53146 3.3569,1.50251 6.685,3.06275 10.0367,4.57314 0,0 0,0 1.5209,-0.0499 z" + id="path371636-7-7" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 1489.4088,515.3385 c 3.2597,-1.48411 6.4827,-3.04435 9.7556,-4.50482 -3.5093,6.18331 -7.0396,12.34823 -10.5778,18.51307 -3.575,-6.17798 -7.1683,-12.34815 -10.7354,-18.53146 3.3569,1.50251 6.685,3.06275 10.0367,4.57314 0,0 0,0 1.5209,-0.0499 z" + id="path371636-7-22" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 400.8254,264.26491 c 3.2597,-1.48411 6.4827,-3.04435 9.7556,-4.50482 -3.5093,6.18331 -7.0396,12.34823 -10.5778,18.51307 -3.575,-6.17798 -7.1683,-12.34815 -10.7354,-18.53146 3.3569,1.50251 6.685,3.06275 10.0367,4.57314 0,0 0,0 1.5209,-0.0499 z" + id="path371636-7-6" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 402.6188,346.76052 c 3.2597,-1.48411 6.4827,-3.04435 9.7556,-4.50482 -3.5093,6.18331 -7.0396,12.34823 -10.5778,18.51307 -3.575,-6.17798 -7.1683,-12.34815 -10.7354,-18.53146 3.3569,1.50251 6.685,3.06275 10.0367,4.57314 0,0 0,0 1.5209,-0.0499 z" + id="path371636-7-1" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 402.6188,658.80913 c 3.2597,-1.48411 6.4827,-3.04435 9.7556,-4.50482 -3.5093,6.18331 -7.0396,12.34823 -10.5778,18.51307 -3.575,-6.17798 -7.1683,-12.34815 -10.7354,-18.53146 3.3569,1.50251 6.685,3.06275 10.0367,4.57314 0,0 0,0 1.5209,-0.0499 z" + id="path371636-7-5" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 402.6188,732.33782 c 3.2597,-1.48411 6.4827,-3.04435 9.7556,-4.50482 -3.5093,6.18331 -7.0396,12.34823 -10.5778,18.51307 -3.575,-6.17798 -7.1683,-12.34815 -10.7354,-18.53146 3.3569,1.50251 6.685,3.06275 10.0367,4.57314 0,0 0,0 1.5209,-0.0499 z" + id="path371636-7-9" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 402.4121,800.48637 c 3.2597,-1.48411 6.4827,-3.04435 9.7556,-4.50482 -3.5093,6.18331 -7.0396,12.34823 -10.5778,18.51307 -3.575,-6.17798 -7.1683,-12.34815 -10.7354,-18.53146 3.3569,1.50251 6.685,3.06275 10.0367,4.57314 0,0 0,0 1.5209,-0.0499 z" + id="path371636-7-4" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 402.2055,875.80845 c 3.2597,-1.48411 6.4827,-3.04435 9.7556,-4.50482 -3.5093,6.18331 -7.0396,12.34823 -10.5778,18.51307 -3.575,-6.17798 -7.1683,-12.34815 -10.7354,-18.53146 3.3569,1.50251 6.685,3.06275 10.0367,4.57314 0,0 0,0 1.5209,-0.0499 z" + id="path371636-7-90" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 400.4121,942.16362 c 3.2597,-1.48411 6.4827,-3.04435 9.7556,-4.50482 -3.5093,6.18331 -7.0396,12.34823 -10.5778,18.51307 -3.575,-6.17798 -7.1683,-12.34815 -10.7354,-18.53146 3.3569,1.50251 6.685,3.06275 10.0367,4.57314 0,0 0,0 1.5209,-0.0499 z" + id="path371636-7-91" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 407.9989,1458.6579 c 3.2597,-1.4841 6.4827,-3.0444 9.7556,-4.5049 -3.5093,6.1834 -7.0396,12.3483 -10.5778,18.5131 -3.575,-6.178 -7.1683,-12.3481 -10.7354,-18.5314 3.3569,1.5025 6.685,3.0627 10.0367,4.5731 0,0 0,0 1.5209,-0.05 z" + id="path371636-7-59" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + </g> +</svg> diff --git a/Documentation/gpu/amdgpu/display/dcn3_cm_drm_current.svg b/Documentation/gpu/amdgpu/display/dcn3_cm_drm_current.svg new file mode 100644 index 000000000000..7299ee9b6d64 --- /dev/null +++ b/Documentation/gpu/amdgpu/display/dcn3_cm_drm_current.svg @@ -0,0 +1,1529 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> + +<svg + version="1.1" + id="svg2019" + width="1702" + height="1845" + viewBox="0 0 1702 1845" + sodipodi:docname="dcn3_cm_drm_current.svg" + inkscape:version="1.1.2 (0a00cf5339, 2022-02-04)" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns="http://www.w3.org/2000/svg" + xmlns:svg="http://www.w3.org/2000/svg"> + <defs + id="defs2023" /> + <sodipodi:namedview + id="namedview2021" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageshadow="2" + inkscape:pageopacity="0.0" + inkscape:pagecheckerboard="0" + showgrid="false" + inkscape:zoom="0.55760543" + inkscape:cx="1011.4679" + inkscape:cy="249.28021" + inkscape:window-width="1920" + inkscape:window-height="1011" + inkscape:window-x="0" + inkscape:window-y="0" + inkscape:window-maximized="1" + inkscape:current-layer="g2025" /> + <g + inkscape:groupmode="layer" + inkscape:label="Image" + id="g2025"> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-opacity:1" + id="rect34" + width="208.83351" + height="486.09872" + x="0.90158081" + y="132.77872" /> + <rect + style="fill:#fad7ac;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1019" + width="126.38867" + height="55.320732" + x="25.960823" + y="188.06937" /> + <rect + style="fill:#d0cee2;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1021" + width="126.38867" + height="55.320732" + x="25.960823" + y="346.06937" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1103" + width="126.38867" + height="55.320732" + x="25.960823" + y="266.06937" /> + <rect + style="fill:#f9f7ed;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1105" + width="126.38867" + height="55.320732" + x="25.960823" + y="426.06937" /> + <rect + style="fill:#e6e6e6;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1107" + width="126.38867" + height="55.320732" + x="25.960823" + y="506.06934" /> + <path + d="m 402.61883,171.88069 c 0.025,10.97895 0.01,1001.03791 0.049,1012.01891 2.5462,-1.1592 5.0637,-2.3779 7.6202,-3.5187 -2.7411,4.8298 -5.4987,9.6453 -8.2624,14.4607 -2.7925,-4.8257 -5.5993,-9.6453 -8.3856,-14.4751 2.6221,1.1736 5.2217,2.3923 7.8398,3.5721 0,-10.8825 -0.035,-1000.84096 -0.031,-1011.72348 0.053,-0.30366 -0.2175,-0.50268 -0.3652,-0.72837 l 1.5347,0.39394 z" + id="path381056" + sodipodi:nodetypes="cccccccccc" + style="stroke-width:0.205176" + inkscape:transform-center-x="-325.50819" + inkscape:transform-center-y="-121.97185" /> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-opacity:1" + id="rect1131" + width="239.47592" + height="1015.9909" + x="298.65631" + y="82.399658" /> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-width:1.27861;stroke-opacity:1" + id="rect1133" + width="340.44653" + height="525.77448" + x="298.79562" + y="1142.5299" /> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-opacity:1" + id="rect1237" + width="284.00113" + height="945.41412" + x="827.75012" + y="82.880798" + inkscape:connector-avoid="true" /> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-opacity:1" + id="rect1239" + width="239.37569" + height="179.03308" + x="1356.9507" + y="98.758331" /> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-width:1.00744;stroke-opacity:1" + id="rect1241" + width="239.4184" + height="713.64905" + x="1356.9543" + y="307.7951" + inkscape:connector-avoid="true" /> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-opacity:1" + id="rect1345" + width="330.32059" + height="409.44757" + x="1363.8723" + y="1147.7572" /> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-opacity:1" + id="rect1347" + width="369.8941" + height="682.32245" + x="825.72528" + y="1146.6448" + inkscape:connector-avoid="true" /> + <rect + style="fill:#f9f7ed;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1349" + width="163.95746" + height="40.144867" + x="1389.9988" + y="190.80583" /> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-width:0.964132;stroke-opacity:1" + id="rect1619" + width="271.99091" + height="42.038273" + x="1393.981" + y="1197.161" + inkscape:connector-avoid="true" /> + <path + d="m 1469.3028,1238.8328 c 0.025,10.9789 0.01,175.0378 0.049,186.0188 2.5462,-1.1592 5.0637,-2.3779 7.6202,-3.5187 -2.7411,4.8298 -5.4987,9.6453 -8.2624,14.4607 -2.7925,-4.8257 -5.5993,-9.6453 -8.3856,-14.4751 2.6221,1.1736 5.2217,2.3923 7.8398,3.5721 0,-10.8825 -0.035,-174.8409 -0.031,-185.7234 0.053,-0.3037 -0.2175,-0.5027 -0.3652,-0.7284 l 1.5347,0.394 z" + id="path106-1" + sodipodi:nodetypes="cccccccccc" + style="stroke-width:0.205176" + inkscape:transform-center-x="-325.50819" + inkscape:transform-center-y="-121.97185" /> + <path + d="m 407.4759,1238.4728 c 0.025,10.9789 0.01,291.0378 0.049,302.0188 2.5462,-1.1592 5.0637,-2.3779 7.6202,-3.5187 -2.7411,4.8298 -5.4987,9.6453 -8.2624,14.4607 -2.7925,-4.8257 -5.5993,-9.6453 -8.3856,-14.4751 2.6221,1.1736 5.2217,2.3923 7.8398,3.5721 0,-10.8825 -0.035,-290.8409 -0.031,-301.7234 0.053,-0.3037 -0.2175,-0.5027 -0.3652,-0.7284 l 1.5347,0.394 z" + id="path106-1-7" + sodipodi:nodetypes="cccccccccc" + style="stroke-width:0.205176" + inkscape:transform-center-x="-325.50819" + inkscape:transform-center-y="-121.97185" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1623" + width="137.32646" + height="41.782684" + x="1396.3848" + y="1268.2837" + inkscape:connector-avoid="true" /> + <rect + style="fill:#fad7ac;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1705" + width="137.32646" + height="41.782684" + x="1396.3848" + y="1348.2837" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1707" + width="137.32646" + height="41.782684" + x="1396.3848" + y="1432.2837" /> + <rect + style="fill:#f9f7ed;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1731" + width="222.34483" + height="44.64616" + x="867.36292" + y="190.42665" + inkscape:connector-avoid="true" /> + <rect + style="fill:#f9f7ed;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1813" + width="222.34483" + height="44.64616" + x="867.36292" + y="254.42664" + inkscape:connector-avoid="true" /> + <rect + style="fill:#f9f7ed;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1815" + width="222.34483" + height="44.64616" + x="867.36292" + y="318.42664" + inkscape:connector-avoid="true" /> + <rect + style="fill:#fad7ac;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1817" + width="222.34483" + height="44.64616" + x="867.36292" + y="412.42664" + inkscape:connector-avoid="true" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1819" + width="222.34483" + height="44.64616" + x="867.36292" + y="560.42664" /> + <rect + style="fill:#e6e6e6;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1821" + width="222.34483" + height="44.64616" + x="867.36292" + y="674.42664" + inkscape:connector-avoid="true" /> + <rect + style="fill:#fad7ac;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1823" + width="222.34483" + height="44.64616" + x="867.36292" + y="744.42664" + inkscape:connector-avoid="true" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1825" + width="222.34483" + height="44.64616" + x="867.36292" + y="820.42664" + inkscape:connector-avoid="true" /> + <rect + style="fill:#d0cee2;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1827" + width="222.34483" + height="44.64616" + x="867.36292" + y="890.42664" + inkscape:connector-avoid="true" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1829" + width="222.34483" + height="44.64616" + x="867.36292" + y="956.42664" + inkscape:connector-avoid="true" /> + <rect + style="fill:#fad7ac;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1831" + width="222.34483" + height="44.64616" + x="867.36292" + y="1256.4268" /> + <rect + style="fill:#d0cee2;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1833" + width="222.34483" + height="44.64616" + x="867.36292" + y="1402.4268" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1915" + width="222.34483" + height="44.64616" + x="867.36292" + y="1330.4268" + inkscape:connector-avoid="true" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1917" + width="222.34483" + height="44.64616" + x="867.36292" + y="1478.4268" /> + <rect + style="fill:#fad7ac;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1919" + width="222.34483" + height="44.64616" + x="867.36292" + y="1548.4268" /> + <rect + style="fill:#eeeeee;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1921" + width="222.34483" + height="44.64616" + x="867.36292" + y="1614.4268" /> + <rect + style="fill:#eeeeee;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1923" + width="222.34483" + height="44.64616" + x="867.36292" + y="1686.4268" /> + <rect + style="fill:#eeeeee;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1925" + width="222.34483" + height="44.64616" + x="867.36292" + y="1754.4268" /> + <rect + style="fill:#f9f7ed;fill-opacity:1;stroke:#000000;stroke-width:0.872749;stroke-opacity:1" + id="rect1925-3" + width="169.23357" + height="44.678963" + x="325.21747" + y="134.37756" /> + <rect + style="fill:#fad7ac;fill-opacity:1;stroke:#000000;stroke-width:0.872749;stroke-opacity:1" + id="rect1954" + width="169.23357" + height="44.678963" + x="325.21747" + y="276.37756" + inkscape:connector-avoid="true" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-width:0.87333333;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:none" + id="rect1956" + width="168.66573" + height="122.14091" + x="325.50134" + y="358.6615" + inkscape:connector-avoid="true" /> + <rect + style="fill:#e6e6e6;fill-opacity:1;stroke:#000000;stroke-width:0.872749;stroke-opacity:1" + id="rect1958" + width="169.23357" + height="44.678963" + x="325.21747" + y="672.37756" /> + <rect + style="fill:#fad7ac;fill-opacity:1;stroke:#000000;stroke-width:0.872749;stroke-opacity:1" + id="rect1960" + width="169.23357" + height="44.678963" + x="325.21747" + y="744.37756" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-width:0.965912;stroke-opacity:1" + id="rect1962" + width="169.14041" + height="54.756817" + x="325.26404" + y="814.42413" + inkscape:connector-avoid="true" /> + <rect + style="fill:#d0cee2;fill-opacity:1;stroke:#000000;stroke-width:0.965912;stroke-opacity:1" + id="rect1964" + width="169.14041" + height="54.756817" + x="325.26404" + y="886.42413" + inkscape:connector-avoid="true" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-width:0.965912;stroke-opacity:1" + id="rect1966" + width="169.14041" + height="54.756817" + x="325.26404" + y="952.42413" + inkscape:connector-avoid="true" /> + <rect + style="fill:#fad7ac;fill-opacity:1;stroke:#000000;stroke-width:0.872749;stroke-opacity:1" + id="rect2418" + width="169.23357" + height="44.678963" + x="325.21747" + y="510.37756" + inkscape:connector-avoid="true" /> + <rect + style="fill:#fad7ac;fill-opacity:1;stroke:#000000;stroke-width:0.872749;stroke-opacity:1" + id="rect2422" + width="169.23357" + height="44.678963" + x="325.21747" + y="1262.3777" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-width:0.981369;stroke-opacity:1" + id="rect2424" + width="169.12494" + height="56.528603" + x="325.27179" + y="1322.432" /> + <rect + style="fill:#d0cee2;fill-opacity:1;stroke:#000000;stroke-width:0.981369;stroke-opacity:1" + id="rect2426" + width="169.12494" + height="56.528603" + x="325.27179" + y="1396.432" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-width:1.02091;stroke-opacity:1" + id="rect2428" + width="169.0854" + height="61.19017" + x="325.29156" + y="1468.4518" /> + <rect + style="fill:#fad7ac;fill-opacity:1;stroke:#000000;stroke-width:0.839627;stroke-opacity:1" + id="rect2430" + width="169.26669" + height="41.344128" + x="325.20093" + y="1550.3611" /> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-width:1.13491;stroke-opacity:1" + id="rect2432" + width="287.86237" + height="44.416805" + x="325.34854" + y="1194.5088" /> + <rect + style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-width:1.13102;stroke-opacity:1" + id="rect2434" + width="285.86655" + height="44.4207" + x="867.34656" + y="1194.5068" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2509" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2511" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2513" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2515" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2517" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2519" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2521" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2523" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2525" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2527" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2529" /> + <path + style="fill:none;stroke:#000000;stroke-width:2.66666675;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:8.00000024, 8.00000024;stroke-dashoffset:0" + d="m 867.36292,235.07281 v 0" + id="path2531" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="m 449.83425,179.05653 v 33.6932 h 417.52867" + id="path6876" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1925-3" + inkscape:connection-end="#rect1731" + sodipodi:nodetypes="ccc" /> + <path + style="display:inline;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="m 494.45103,156.71704 h 216.64955 v 161.7096 h 156.26234" + id="path6878" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1925-3" + sodipodi:nodetypes="cccc" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="m 451.83425,321.05653 v 19.69319 h 415.52867" + id="path7294" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1954" + inkscape:connection-end="#rect1815" + sodipodi:nodetypes="ccc" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="M 494.45103,298.71704 H 659.10058 V 434.74972 H 867.36292" + id="path7296" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-end="#rect1817" + inkscape:connection-start="#rect1954" + sodipodi:nodetypes="cccc" /> + <path + style="display:inline;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="M 867.36292,560.42664 H 661.10058 V 480.8024 H 494.16705" + id="path7720" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cccc" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="M 455.83425,594.37756 V 582.74972 H 867.36292" + id="path7724" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect2420" + inkscape:connection-end="#rect1819" + sodipodi:nodetypes="ccc" /> + <rect + style="fill:#afdde9;fill-opacity:1;stroke:#000000;stroke-width:0.872749;stroke-opacity:1" + id="rect2420" + width="169.23357" + height="44.678963" + x="325.21747" + y="594.37756" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="M 494.45103,696.74972 H 867.36292" + id="path7726" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1958" + inkscape:connection-end="#rect1821" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="M 867.36292,766.74972 H 494.45103" + id="path7728" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1823" + inkscape:connection-end="#rect1960" /> + <path + style="display:inline;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="M 494.45105,789.05652 H 657.82418 V 1278.7498 H 867.36292" + id="path7730" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-end="#rect1831" + sodipodi:nodetypes="cccc" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="m 494.40445,841.80254 h 167.41973 v 0.94718 h 205.53874" + id="path8140" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1962" + inkscape:connection-end="#rect1825" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="m 494.40445,913.80254 h 167.41973 v -1.05282 h 205.53874" + id="path8142" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1964" + inkscape:connection-end="#rect1827" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="m 494.40445,979.80254 h 167.41973 v -1.05282 h 205.53874" + id="path8144" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1966" + inkscape:connection-end="#rect1829" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="M 494.39673,1352.7498 H 867.36292" + id="path8146" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect2424" + inkscape:connection-end="#rect1915" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="M 494.39673,1424.7498 H 867.36292" + id="path8148" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect2426" + inkscape:connection-end="#rect1833" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="M 494.37697,1500.7498 H 867.36292" + id="path8150" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect2428" + inkscape:connection-end="#rect1917" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="m 494.46762,1570.7498 h 372.8953" + id="path8152" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect2430" + inkscape:connection-end="#rect1919" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="M 1396.3848,1289.175 H 1288.1445 V 582.74972 h -198.4368" + id="path8154" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1623" + inkscape:connection-end="#rect1819" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="m 1396.3848,1369.175 h -156.2403 v -90.4252 h -150.4368" + id="path8462" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1705" + inkscape:connection-end="#rect1831" + sodipodi:nodetypes="cccc" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="m 1089.7077,1500.7498 h 375.3403 v -26.6834" + id="path8668" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1917" + inkscape:connection-end="#rect1707" /> + <path + style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="M 1389.9988,212.74973 H 1089.7077" + id="path8672" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-start="#rect1349" + inkscape:connection-end="#rect1731" /> + <path + style="display:inline;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 6;stroke-dashoffset:0;stroke-opacity:1" + d="M 1389.9988,230.9507 H 1223.331 v 109.79902 h -133.6233" + id="path8674" + inkscape:connector-type="orthogonal" + inkscape:connector-curvature="0" + inkscape:connection-end="#rect1815" + sodipodi:nodetypes="cccc" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="58.63356" + y="69.574417" + id="text28675"><tspan + sodipodi:role="line" + id="tspan28673" + x="58.63356" + y="69.574417" /></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="56.388252" + y="221.86568" + id="text31913"><tspan + sodipodi:role="line" + id="tspan31911" + x="56.388252" + y="221.86568">Matrix</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="53.441296" + y="300.866" + id="text38843"><tspan + sodipodi:role="line" + id="tspan38841" + x="53.441296" + y="300.866">1D LUT</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="53.441296" + y="378.866" + id="text41049"><tspan + sodipodi:role="line" + id="tspan41047" + x="53.441296" + y="378.866">3D LUT</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="40.831493" + y="460.87411" + id="text45037"><tspan + sodipodi:role="line" + id="tspan45035" + x="40.831493" + y="460.87411" + style="font-size:18.6667px">Unpacking</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="62.130371" + y="540.68872" + id="text49945"><tspan + sodipodi:role="line" + id="tspan49943" + x="62.130371" + y="540.68872" + style="font-size:18.6667px">Other</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1423.2806" + y="128.08769" + id="text55719"><tspan + sodipodi:role="line" + id="tspan55717" + x="1423.2806" + y="128.08769" + style="font-size:18.6667px">drm_framebuffer</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1439.9988" + y="218.74973" + id="text62479"><tspan + sodipodi:role="line" + id="tspan62477" + x="1439.9988" + y="218.74973" + style="font-size:18.6667px">format</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1475.2806" + y="340.08771" + id="text64465"><tspan + sodipodi:role="line" + id="tspan64463" + x="1475.2806" + y="340.08771" + style="font-size:18.6667px">drm_plane</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1589.2806" + y="1178.0876" + id="text64469"><tspan + sodipodi:role="line" + id="tspan64467" + x="1589.2806" + y="1178.0876" + style="font-size:18.6667px">drm_crtc</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="872.23993" + y="1172.4491" + id="text64469-9"><tspan + sodipodi:role="line" + id="tspan64467-2" + x="872.23993" + y="1172.4491" + style="font-size:18.6667px">Stream</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="328.26071" + y="1175.6371" + id="text64469-9-2"><tspan + sodipodi:role="line" + id="tspan64467-2-8" + x="328.26071" + y="1175.6371" + style="font-size:18.6667px">MPC</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="330.14737" + y="114.41869" + id="text64469-9-9"><tspan + sodipodi:role="line" + id="tspan64467-2-7" + x="330.14737" + y="114.41869" + style="font-size:18.6667px">DPP</tspan></text> + <path + d="m 1488.3608,401.47792 c 0.025,10.97895 0.01,773.03788 0.049,784.01888 2.5462,-1.1592 5.0637,-2.3779 7.6202,-3.5187 -2.7411,4.8298 -5.4987,9.6453 -8.2624,14.4607 -2.7925,-4.8257 -5.5993,-9.6453 -8.3856,-14.4751 2.6221,1.1736 5.2217,2.3923 7.8398,3.5721 0,-10.8825 -0.035,-772.84093 -0.031,-783.72345 0.053,-0.30366 -0.2175,-0.50268 -0.3652,-0.72837 l 1.5347,0.39394 z" + id="path106" + sodipodi:nodetypes="cccccccccc" + style="stroke-width:0.205176" + inkscape:transform-center-x="-325.50819" + inkscape:transform-center-y="-121.97185" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1495.9988" + y="1224.7498" + id="text78849"><tspan + sodipodi:role="line" + id="tspan78847" + x="1495.9988" + y="1224.7498" + style="font-size:18.6667px">Blender</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1417.9988" + y="1294.7498" + id="text78853"><tspan + sodipodi:role="line" + id="tspan78851" + x="1417.9988" + y="1294.7498" + style="font-size:18.6667px">Degamma</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1451.9988" + y="1376.7498" + id="text78857"><tspan + sodipodi:role="line" + id="tspan78855" + x="1451.9988" + y="1376.7498" + style="font-size:18.6667px">CTM</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1427.9988" + y="1458.7498" + id="text78861"><tspan + sodipodi:role="line" + id="tspan78859" + x="1427.9988" + y="1458.7498" + style="font-size:18.6667px">Gamma</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="949.99878" + y="218.74973" + id="text104653"><tspan + sodipodi:role="line" + id="tspan104651" + x="949.99878" + y="218.74973" + style="font-size:18.6667px">format</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="911.99878" + y="284.74973" + id="text104657"><tspan + sodipodi:role="line" + id="tspan104655" + x="911.99878" + y="284.74973" + style="font-size:18.6667px">bias_and_scale</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="887.99878" + y="346.74973" + id="text104661"><tspan + sodipodi:role="line" + id="tspan104659" + x="887.99878" + y="346.74973" + style="font-size:18.6667px">color space matrix</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="871.99878" + y="442.74973" + id="text104665"><tspan + sodipodi:role="line" + id="tspan104663" + x="871.99878" + y="442.74973" + style="font-size:18.6667px">input_csc_color_matrix</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="905.99878" + y="586.74976" + id="text125075"><tspan + sodipodi:role="line" + id="tspan125073" + x="905.99878" + y="586.74976" + style="font-size:18.6667px">in_transfer_func</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="945.0083" + y="702.85938" + id="text117309"><tspan + sodipodi:role="line" + id="tspan117307" + x="945.0083" + y="702.85938" + style="font-size:18.6667px">hdr_mult</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="874.5556" + y="773.42615" + id="text117309-6"><tspan + sodipodi:role="line" + id="tspan117307-7" + x="874.5556" + y="773.42615" + style="font-size:18.6667px">gamut_remap_matrix</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="913.72528" + y="846.55896" + id="text117309-5"><tspan + sodipodi:role="line" + id="tspan117307-3" + x="913.72528" + y="846.55896" + style="font-size:18.6667px">in_shaper_func</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="937.72528" + y="918.25787" + id="text117309-56"><tspan + sodipodi:role="line" + id="tspan117307-2" + x="937.72528" + y="918.25787" + style="font-size:18.6667px">lut3d_func</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="945.9895" + y="986.10767" + id="text117309-9"><tspan + sodipodi:role="line" + id="tspan117307-1" + x="945.9895" + y="986.10767" + style="font-size:18.6667px">blend_tf</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="975.91803" + y="1224.5564" + id="text137434"><tspan + sodipodi:role="line" + id="tspan137432" + x="975.91803" + y="1224.5564" + style="font-size:18.6667px">Blender</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="879.31372" + y="1283.4249" + id="text137434-2"><tspan + sodipodi:role="line" + id="tspan137432-7" + x="879.31372" + y="1283.4249" + style="font-size:18.6667px">gamut_remap_matrix</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="925.31372" + y="1359.2747" + id="text137434-0"><tspan + sodipodi:role="line" + id="tspan137432-9" + x="925.31372" + y="1359.2747" + style="font-size:18.6667px">func_shaper</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="930.33252" + y="1430.2566" + id="text137434-3"><tspan + sodipodi:role="line" + id="tspan137432-6" + x="930.33252" + y="1430.2566" + style="font-size:18.6667px">lut3d_func</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="900.18158" + y="1504.6725" + id="text137434-06"><tspan + sodipodi:role="line" + id="tspan137432-2" + x="900.18158" + y="1504.6725" + style="font-size:18.6667px">out_transfer_func</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="904.0307" + y="1575.8053" + id="text137434-6"><tspan + sodipodi:role="line" + id="tspan137432-1" + x="904.0307" + y="1575.8053" + style="font-size:18.6667px">csc_color_matrix</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="903.16278" + y="1642.1078" + id="text137434-8"><tspan + sodipodi:role="line" + id="tspan137432-79" + x="903.16278" + y="1642.1078" + style="font-size:18.6667px">bit_depth_param</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="939.31372" + y="1713.8068" + id="text137434-20"><tspan + sodipodi:role="line" + id="tspan137432-23" + x="939.31372" + y="1713.8068" + style="font-size:18.6667px">clamping</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="894.0307" + y="1782.5244" + id="text137434-7"><tspan + sodipodi:role="line" + id="tspan137432-5" + x="894.0307" + y="1782.5244" + style="font-size:18.6667px">output_color_space</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="869.63062" + y="117.7968" + id="text176429"><tspan + sodipodi:role="line" + id="tspan176427" + x="869.63062" + y="117.7968" + style="font-size:18.6667px">Plane</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="27.605465" + y="162.20587" + id="text176429-2"><tspan + sodipodi:role="line" + id="tspan176427-0" + x="27.605465" + y="162.20587" + style="font-size:18.6667px">Legend</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="298.63959" + y="59.293999" + id="text176429-9"><tspan + sodipodi:role="line" + id="tspan176427-2" + x="298.63959" + y="59.293999" + style="font-size:18.6667px">DCN 3.0</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="826.65735" + y="59.458061" + id="text176429-66"><tspan + sodipodi:role="line" + id="tspan176427-4" + x="826.65735" + y="59.458061" + style="font-size:18.6667px">DC Interface</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1362.9948" + y="59.458061" + id="text176429-95"><tspan + sodipodi:role="line" + id="tspan176427-04" + x="1362.9948" + y="59.458061" + style="font-size:18.6667px">DRM Interface</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="867.34656" + y="1194.5068" + id="text184728"><tspan + sodipodi:role="line" + id="tspan184726" + x="867.34656" + y="1194.5068" /></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="389.01593" + y="159.8909" + id="text64469-9-3"><tspan + sodipodi:role="line" + id="tspan64467-2-6" + x="389.01593" + y="159.8909" + style="font-size:18.6667px">CNVC</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="365.88379" + y="303.59048" + id="text64469-9-1"><tspan + sodipodi:role="line" + id="tspan64467-2-2" + x="365.88379" + y="303.59048" + style="font-size:18.6667px">Input CSC</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="413.06488" + y="390.95001" + id="text64469-9-93"><tspan + sodipodi:role="line" + id="tspan64467-2-1" + x="413.06488" + y="390.95001" + style="font-size:18.6667px;text-align:center;text-anchor:middle">DeGamma</tspan><tspan + sodipodi:role="line" + x="413.06488" + y="414.28339" + style="font-size:18.6667px;text-align:center;text-anchor:middle" + id="tspan233797">ROM</tspan><tspan + sodipodi:role="line" + x="413.06488" + y="437.61676" + style="font-size:10.6667px;text-align:center;text-anchor:middle" + id="tspan233799">(sRGB, BT2020, Gamma 2.2,</tspan><tspan + sodipodi:role="line" + x="413.06488" + y="460.95013" + style="font-size:10.6667px;text-align:center;text-anchor:middle" + id="tspan242597">PQ, HLG)</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="372.44986" + y="538.83807" + id="text64469-9-94"><tspan + sodipodi:role="line" + id="tspan64467-2-78" + x="372.44986" + y="538.83807" + style="font-size:18.6667px">Post CSC</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:16px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="335.31775" + y="622.23511" + id="text64469-9-4"><tspan + sodipodi:role="line" + id="tspan64467-2-5" + x="335.31775" + y="622.23511" + style="font-size:16px">Gamma Correction</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="351.16684" + y="700.34918" + id="text64469-9-0"><tspan + sodipodi:role="line" + id="tspan64467-2-3" + x="351.16684" + y="700.34918" + style="font-size:18.6667px">HDR Multiply</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="345.16684" + y="771.33112" + id="text64469-9-6"><tspan + sodipodi:role="line" + id="tspan64467-2-10" + x="345.16684" + y="771.33112" + style="font-size:18.6667px">Gamut Remap</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="412.5184" + y="836.04877" + id="text64469-9-63"><tspan + sodipodi:role="line" + id="tspan64467-2-20" + x="412.5184" + y="836.04877" + style="font-size:18.6667px;text-align:center;text-anchor:middle">Shaper LUT</tspan><tspan + sodipodi:role="line" + x="412.5184" + y="859.38214" + style="font-size:18.6667px;text-align:center;text-anchor:middle" + id="tspan222533">RAM</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="413.54086" + y="908.61554" + id="text64469-9-61"><tspan + sodipodi:role="line" + id="tspan64467-2-55" + x="413.54086" + y="908.61554" + style="font-size:18.6667px;text-align:center;text-anchor:middle">3D LUT</tspan><tspan + sodipodi:role="line" + x="413.54086" + y="931.94891" + style="font-size:18.6667px;text-align:center;text-anchor:middle" + id="tspan221121">RAM</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="344.0347" + y="985.33319" + id="text64469-9-47"><tspan + sodipodi:role="line" + id="tspan64467-2-65" + x="344.0347" + y="985.33319" + style="font-size:18.6667px">Blend Gamma</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="433.84625" + y="1223.411" + id="text64469-9-69"><tspan + sodipodi:role="line" + id="tspan64467-2-37" + x="433.84625" + y="1223.411" + style="font-size:18.6667px">Blender</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="343.73291" + y="1290.2421" + id="text64469-9-45"><tspan + sodipodi:role="line" + id="tspan64467-2-25" + x="343.73291" + y="1290.2421" + style="font-size:18.6667px">Gamut Remap</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="408.74442" + y="1344.2428" + id="text64469-9-474"><tspan + sodipodi:role="line" + id="tspan64467-2-4" + x="408.74442" + y="1344.2428" + style="font-size:18.6667px;text-align:center;text-anchor:middle">Shaper LUT</tspan><tspan + sodipodi:role="line" + x="408.74442" + y="1367.5762" + style="font-size:18.6667px;text-align:center;text-anchor:middle" + id="tspan208303">RAM</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="407.1257" + y="1420.2435" + id="text64469-9-30"><tspan + sodipodi:role="line" + id="tspan64467-2-786" + x="407.1257" + y="1420.2435" + style="font-size:18.6667px;text-align:center;text-anchor:middle">3D LUT</tspan><tspan + sodipodi:role="line" + x="407.1257" + y="1443.5769" + style="font-size:18.6667px;text-align:center;text-anchor:middle" + id="tspan204749">RAM</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="408.64996" + y="1492.8102" + id="text64469-9-8"><tspan + sodipodi:role="line" + id="tspan64467-2-84" + x="408.64996" + y="1492.8102" + style="font-size:18.6667px;text-align:center;text-anchor:middle">Gamma</tspan><tspan + sodipodi:role="line" + x="408.64996" + y="1516.1436" + style="font-size:18.6667px;text-align:center;text-anchor:middle" + id="tspan197733">RAM</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="385.46863" + y="1575.2261" + id="text64469-9-31"><tspan + sodipodi:role="line" + id="tspan64467-2-49" + x="385.46863" + y="1575.2261" + style="font-size:18.6667px">OCSC</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:40px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1356.5106" + y="53.140579" + id="text273287"><tspan + sodipodi:role="line" + id="tspan273285" + x="1356.5106" + y="53.140579" /></text> + <rect + style="fill:#f9f7ed;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1411" + width="177.28049" + height="38.940468" + x="1392.2576" + y="459.24118" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1411.7203" + y="485.93231" + id="text78841"><tspan + sodipodi:role="line" + id="tspan78839" + x="1411.7203" + y="485.93231" + style="font-size:18.6667px">color_encoding</tspan></text> + <rect + style="fill:#f9f7ed;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect1515" + width="175.11876" + height="43.239407" + x="1393.7493" + y="525.6983" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:17.3333px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1399.212" + y="553.44904" + id="text78845"><tspan + sodipodi:role="line" + id="tspan78843" + x="1399.212" + y="553.44904">pixel_blend_mode</tspan></text> + <rect + style="fill:#f9f7ed;fill-opacity:1;stroke:#000000;stroke-opacity:1" + id="rect371322" + width="177.28049" + height="38.940468" + x="1391.6781" + y="385.61713" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:18.6667px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none" + x="1427.5771" + y="409.29523" + id="text78837"><tspan + sodipodi:role="line" + id="tspan78835" + x="1427.5771" + y="409.29523" + style="font-size:18.6667px">color_range</tspan></text> + <path + d="m 1469.6815,1334.9145 c 3.2597,-1.4841 6.4827,-3.0444 9.7556,-4.5049 -3.5093,6.1834 -7.0396,12.3483 -10.5778,18.5131 -3.575,-6.178 -7.1683,-12.3481 -10.7354,-18.5314 3.3569,1.5025 6.685,3.0627 10.0367,4.5731 0,0 0,0 1.5209,-0.05 z" + id="path371636-7" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 1467.8882,1256.0056 c 3.2597,-1.4841 6.4827,-3.0443 9.7556,-4.5048 -3.5093,6.1833 -7.0396,12.3482 -10.5778,18.5131 -3.575,-6.178 -7.1683,-12.3482 -10.7354,-18.5315 3.3569,1.5025 6.685,3.0628 10.0367,4.5731 0,0 0,0 1.5209,-0.05 z" + id="path371636-7-2" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 1487.6154,441.80981 c 3.2597,-1.48411 6.4827,-3.04435 9.7556,-4.50482 -3.5093,6.18331 -7.0396,12.34823 -10.5778,18.51307 -3.575,-6.17798 -7.1683,-12.34815 -10.7354,-18.53146 3.3569,1.50251 6.685,3.06275 10.0367,4.57314 0,0 0,0 1.5209,-0.0499 z" + id="path371636-7-7" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 1489.4088,515.3385 c 3.2597,-1.48411 6.4827,-3.04435 9.7556,-4.50482 -3.5093,6.18331 -7.0396,12.34823 -10.5778,18.51307 -3.575,-6.17798 -7.1683,-12.34815 -10.7354,-18.53146 3.3569,1.50251 6.685,3.06275 10.0367,4.57314 0,0 0,0 1.5209,-0.0499 z" + id="path371636-7-22" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 400.8254,264.26491 c 3.2597,-1.48411 6.4827,-3.04435 9.7556,-4.50482 -3.5093,6.18331 -7.0396,12.34823 -10.5778,18.51307 -3.575,-6.17798 -7.1683,-12.34815 -10.7354,-18.53146 3.3569,1.50251 6.685,3.06275 10.0367,4.57314 0,0 0,0 1.5209,-0.0499 z" + id="path371636-7-6" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 402.6188,346.76052 c 3.2597,-1.48411 6.4827,-3.04435 9.7556,-4.50482 -3.5093,6.18331 -7.0396,12.34823 -10.5778,18.51307 -3.575,-6.17798 -7.1683,-12.34815 -10.7354,-18.53146 3.3569,1.50251 6.685,3.06275 10.0367,4.57314 0,0 0,0 1.5209,-0.0499 z" + id="path371636-7-1" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 404.2055,500.78482 c 3.2597,-1.48411 6.4827,-3.04435 9.7556,-4.50482 -3.5093,6.18331 -7.0396,12.34823 -10.5778,18.51307 -3.575,-6.17798 -7.1683,-12.34815 -10.7354,-18.53146 3.3569,1.50251 6.685,3.06275 10.0367,4.57314 0,0 0,0 1.5209,-0.0499 z" + id="path371636-7-0" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 402.6188,581.69367 c 3.2597,-1.48411 6.4827,-3.04435 9.7556,-4.50482 -3.5093,6.18331 -7.0396,12.34823 -10.5778,18.51307 -3.575,-6.17798 -7.1683,-12.34815 -10.7354,-18.53146 3.3569,1.50251 6.685,3.06275 10.0367,4.57314 0,0 0,0 1.5209,-0.0499 z" + id="path371636-7-61" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 402.6188,658.80913 c 3.2597,-1.48411 6.4827,-3.04435 9.7556,-4.50482 -3.5093,6.18331 -7.0396,12.34823 -10.5778,18.51307 -3.575,-6.17798 -7.1683,-12.34815 -10.7354,-18.53146 3.3569,1.50251 6.685,3.06275 10.0367,4.57314 0,0 0,0 1.5209,-0.0499 z" + id="path371636-7-5" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 402.6188,732.33782 c 3.2597,-1.48411 6.4827,-3.04435 9.7556,-4.50482 -3.5093,6.18331 -7.0396,12.34823 -10.5778,18.51307 -3.575,-6.17798 -7.1683,-12.34815 -10.7354,-18.53146 3.3569,1.50251 6.685,3.06275 10.0367,4.57314 0,0 0,0 1.5209,-0.0499 z" + id="path371636-7-9" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 402.4121,800.48637 c 3.2597,-1.48411 6.4827,-3.04435 9.7556,-4.50482 -3.5093,6.18331 -7.0396,12.34823 -10.5778,18.51307 -3.575,-6.17798 -7.1683,-12.34815 -10.7354,-18.53146 3.3569,1.50251 6.685,3.06275 10.0367,4.57314 0,0 0,0 1.5209,-0.0499 z" + id="path371636-7-4" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 402.2055,875.80845 c 3.2597,-1.48411 6.4827,-3.04435 9.7556,-4.50482 -3.5093,6.18331 -7.0396,12.34823 -10.5778,18.51307 -3.575,-6.17798 -7.1683,-12.34815 -10.7354,-18.53146 3.3569,1.50251 6.685,3.06275 10.0367,4.57314 0,0 0,0 1.5209,-0.0499 z" + id="path371636-7-90" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 400.4121,942.16362 c 3.2597,-1.48411 6.4827,-3.04435 9.7556,-4.50482 -3.5093,6.18331 -7.0396,12.34823 -10.5778,18.51307 -3.575,-6.17798 -7.1683,-12.34815 -10.7354,-18.53146 3.3569,1.50251 6.685,3.06275 10.0367,4.57314 0,0 0,0 1.5209,-0.0499 z" + id="path371636-7-91" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 407.9989,1311.6005 c 3.2597,-1.4841 6.4827,-3.0444 9.7556,-4.5048 -3.5093,6.1833 -7.0396,12.3482 -10.5778,18.513 -3.575,-6.1779 -7.1683,-12.3481 -10.7354,-18.5314 3.3569,1.5025 6.685,3.0627 10.0367,4.5731 0,0 0,0 1.5209,-0.05 z" + id="path371636-7-77" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 407.9989,1381.5424 c 3.2597,-1.4841 6.4827,-3.0443 9.7556,-4.5048 -3.5093,6.1833 -7.0396,12.3482 -10.5778,18.5131 -3.575,-6.178 -7.1683,-12.3482 -10.7354,-18.5315 3.3569,1.5025 6.685,3.0627 10.0367,4.5731 0,0 0,0 1.5209,-0.05 z" + id="path371636-7-11" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + <path + d="m 407.9989,1458.6579 c 3.2597,-1.4841 6.4827,-3.0444 9.7556,-4.5049 -3.5093,6.1834 -7.0396,12.3483 -10.5778,18.5131 -3.575,-6.178 -7.1683,-12.3481 -10.7354,-18.5314 3.3569,1.5025 6.685,3.0627 10.0367,4.5731 0,0 0,0 1.5209,-0.05 z" + id="path371636-7-59" + sodipodi:nodetypes="cccccc" + style="stroke-width:0.262672" + inkscape:transform-center-x="-416.72543" + inkscape:transform-center-y="-156.15191" /> + </g> +</svg> diff --git a/Documentation/gpu/amdgpu/display/display-manager.rst b/Documentation/gpu/amdgpu/display/display-manager.rst index 7ce31f89d9a0..b7abb18cfc82 100644 --- a/Documentation/gpu/amdgpu/display/display-manager.rst +++ b/Documentation/gpu/amdgpu/display/display-manager.rst @@ -40,3 +40,144 @@ Atomic Implementation .. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c :functions: amdgpu_dm_atomic_check amdgpu_dm_atomic_commit_tail + +Color Management Properties +=========================== + +.. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c + :doc: overview + +.. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c + :internal: + + +DC Color Capabilities between DCN generations +--------------------------------------------- + +DRM/KMS framework defines three CRTC color correction properties: degamma, +color transformation matrix (CTM) and gamma, and two properties for degamma and +gamma LUT sizes. AMD DC programs some of the color correction features +pre-blending but DRM/KMS has not per-plane color correction properties. + +In general, the DRM CRTC color properties are programmed to DC, as follows: +CRTC gamma after blending, and CRTC degamma pre-blending. Although CTM is +programmed after blending, it is mapped to DPP hw blocks (pre-blending). Other +color caps available in the hw is not currently exposed by DRM interface and +are bypassed. + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/dc.h + :doc: color-management-caps + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/dc.h + :internal: + +The color pipeline has undergone major changes between DCN hardware +generations. What's possible to do before and after blending depends on +hardware capabilities, as illustrated below by the DCN 2.0 and DCN 3.0 families +schemas. + +**DCN 2.0 family color caps and mapping** + +.. kernel-figure:: dcn2_cm_drm_current.svg + +**DCN 3.0 family color caps and mapping** + +.. kernel-figure:: dcn3_cm_drm_current.svg + +Blend Mode Properties +===================== + +Pixel blend mode is a DRM plane composition property of :c:type:`drm_plane` used to +describes how pixels from a foreground plane (fg) are composited with the +background plane (bg). Here, we present main concepts of DRM blend mode to help +to understand how this property is mapped to AMD DC interface. See more about +this DRM property and the alpha blending equations in :ref:`DRM Plane +Composition Properties <plane_composition_properties>`. + +Basically, a blend mode sets the alpha blending equation for plane +composition that fits the mode in which the alpha channel affects the state of +pixel color values and, therefore, the resulted pixel color. For +example, consider the following elements of the alpha blending equation: + +- *fg.rgb*: Each of the RGB component values from the foreground's pixel. +- *fg.alpha*: Alpha component value from the foreground's pixel. +- *bg.rgb*: Each of the RGB component values from the background. +- *plane_alpha*: Plane alpha value set by the **plane "alpha" property**, see + more in :ref:`DRM Plane Composition Properties <plane_composition_properties>`. + +in the basic alpha blending equation:: + + out.rgb = alpha * fg.rgb + (1 - alpha) * bg.rgb + +the alpha channel value of each pixel in a plane is ignored and only the plane +alpha affects the resulted pixel color values. + +DRM has three blend mode to define the blend formula in the plane composition: + +* **None**: Blend formula that ignores the pixel alpha. + +* **Pre-multiplied**: Blend formula that assumes the pixel color values in a + plane was already pre-multiplied by its own alpha channel before storage. + +* **Coverage**: Blend formula that assumes the pixel color values were not + pre-multiplied with the alpha channel values. + +and pre-multiplied is the default pixel blend mode, that means, when no blend +mode property is created or defined, DRM considers the plane's pixels has +pre-multiplied color values. On IGT GPU tools, the kms_plane_alpha_blend test +provides a set of subtests to verify plane alpha and blend mode properties. + +The DRM blend mode and its elements are then mapped by AMDGPU display manager +(DM) to program the blending configuration of the Multiple Pipe/Plane Combined +(MPC), as follows: + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h + :doc: mpc-overview + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h + :functions: mpcc_blnd_cfg + +Therefore, the blending configuration for a single MPCC instance on the MPC +tree is defined by :c:type:`mpcc_blnd_cfg`, where +:c:type:`pre_multiplied_alpha` is the alpha pre-multiplied mode flag used to +set :c:type:`MPCC_ALPHA_MULTIPLIED_MODE`. It controls whether alpha is +multiplied (true/false), being only true for DRM pre-multiplied blend mode. +:c:type:`mpcc_alpha_blend_mode` defines the alpha blend mode regarding pixel +alpha and plane alpha values. It sets one of the three modes for +:c:type:`MPCC_ALPHA_BLND_MODE`, as described below. + +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h + :functions: mpcc_alpha_blend_mode + +DM then maps the elements of `enum mpcc_alpha_blend_mode` to those in the DRM +blend formula, as follows: + +* *MPC pixel alpha* matches *DRM fg.alpha* as the alpha component value + from the plane's pixel +* *MPC global alpha* matches *DRM plane_alpha* when the pixel alpha should + be ignored and, therefore, pixel values are not pre-multiplied +* *MPC global gain* assumes *MPC global alpha* value when both *DRM + fg.alpha* and *DRM plane_alpha* participate in the blend equation + +In short, *fg.alpha* is ignored by selecting +:c:type:`MPCC_ALPHA_BLEND_MODE_GLOBAL_ALPHA`. On the other hand, (plane_alpha * +fg.alpha) component becomes available by selecting +:c:type:`MPCC_ALPHA_BLEND_MODE_PER_PIXEL_ALPHA_COMBINED_GLOBAL_GAIN`. And the +:c:type:`MPCC_ALPHA_MULTIPLIED_MODE` defines if the pixel color values are +pre-multiplied by alpha or not. + +Blend configuration flow +------------------------ + +The alpha blending equation is configured from DRM to DC interface by the +following path: + +1. When updating a :c:type:`drm_plane_state <drm_plane_state>`, DM calls + :c:type:`fill_blending_from_plane_state()` that maps + :c:type:`drm_plane_state <drm_plane_state>` attributes to + :c:type:`dc_plane_info <dc_plane_info>` struct to be handled in the + OS-agnostic component (DC). + +2. On DC interface, :c:type:`struct mpcc_blnd_cfg <mpcc_blnd_cfg>` programs the + MPCC blend configuration considering the :c:type:`dc_plane_info + <dc_plane_info>` input from DPP. diff --git a/Documentation/gpu/amdgpu/display/index.rst b/Documentation/gpu/amdgpu/display/index.rst index c1fb2fb3c710..f8a4f53d70d8 100644 --- a/Documentation/gpu/amdgpu/display/index.rst +++ b/Documentation/gpu/amdgpu/display/index.rst @@ -28,4 +28,5 @@ table of content: display-manager.rst dc-debug.rst dcn-overview.rst + mpo-overview.rst dc-glossary.rst diff --git a/Documentation/gpu/amdgpu/display/mpo-cursor.svg b/Documentation/gpu/amdgpu/display/mpo-cursor.svg new file mode 100644 index 000000000000..9d9de76847c3 --- /dev/null +++ b/Documentation/gpu/amdgpu/display/mpo-cursor.svg @@ -0,0 +1,435 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="160.5318mm" + height="65.443306mm" + viewBox="0 0 160.5318 65.443308" + version="1.1" + id="svg843" + inkscape:version="0.92.5 (2060ec1f9f, 2020-04-08)" + sodipodi:docname="mpo-cursor.svg"> + <defs + id="defs837"> + <marker + inkscape:stockid="Arrow1Send" + orient="auto" + refY="0" + refX="0" + id="Arrow1Send" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1568" + d="M 0,0 5,-5 -12.5,0 5,5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="matrix(-0.2,0,0,-0.2,-1.2,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow1Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow1Mend" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1562" + d="M 0,0 5,-5 -12.5,0 5,5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="matrix(-0.4,0,0,-0.4,-4,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="marker1837" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1835" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1580" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow1Send" + orient="auto" + refY="0" + refX="0" + id="Arrow1Send-7" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1568-5" + d="M 0,0 5,-5 -12.5,0 5,5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="matrix(-0.2,0,0,-0.2,-1.2,0)" /> + </marker> + <marker + inkscape:stockid="Arrow1Send" + orient="auto" + refY="0" + refX="0" + id="Arrow1Send-7-2" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1568-5-2" + d="M 0,0 5,-5 -12.5,0 5,5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="matrix(-0.2,0,0,-0.2,-1.2,0)" /> + </marker> + <marker + inkscape:stockid="Arrow1Send" + orient="auto" + refY="0" + refX="0" + id="Arrow1Send-9" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1568-7" + d="M 0,0 5,-5 -12.5,0 5,5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="matrix(-0.2,0,0,-0.2,-1.2,0)" /> + </marker> + <marker + inkscape:stockid="Arrow1Send" + orient="auto" + refY="0" + refX="0" + id="Arrow1Send-9-6" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1568-7-1" + d="M 0,0 5,-5 -12.5,0 5,5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="matrix(-0.2,0,0,-0.2,-1.2,0)" /> + </marker> + <marker + inkscape:stockid="Arrow1Send" + orient="auto" + refY="0" + refX="0" + id="Arrow1Send-9-6-9" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1568-7-1-3" + d="M 0,0 5,-5 -12.5,0 5,5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="matrix(-0.2,0,0,-0.2,-1.2,0)" /> + </marker> + </defs> + <sodipodi:namedview + id="base" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageopacity="0.0" + inkscape:pageshadow="2" + inkscape:zoom="0.35" + inkscape:cx="895.68984" + inkscape:cy="-284.87808" + inkscape:document-units="mm" + inkscape:current-layer="g1433-6" + showgrid="false" + inkscape:window-width="2560" + inkscape:window-height="1376" + inkscape:window-x="0" + inkscape:window-y="27" + inkscape:window-maximized="1" + fit-margin-top="0" + fit-margin-left="0" + fit-margin-right="0" + fit-margin-bottom="0" /> + <metadata + id="metadata840"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title></dc:title> + </cc:Work> + </rdf:RDF> + </metadata> + <g + inkscape:label="Layer 1" + inkscape:groupmode="layer" + id="layer1" + transform="translate(70.035531,-11.72001)"> + <g + id="g1438" + transform="matrix(0.33108827,0,0,0.33108827,-46.847588,7.8396545)"> + <rect + y="51.228218" + x="-69.09626" + height="34.773811" + width="66.523811" + id="rect1388" + style="fill:none;fill-opacity:1;stroke:#000000;stroke-width:1.87854159;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + <text + id="text1392" + y="73.238098" + x="-59.718166" + style="font-style:normal;font-weight:normal;font-size:3.17499995px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.26458332" + xml:space="preserve"><tspan + style="font-weight:bold;font-size:12.69999981px;stroke-width:0.26458332" + y="73.238098" + x="-59.718166" + id="tspan1390" + sodipodi:role="line">Cursor</tspan></text> + </g> + <g + id="g1433" + transform="matrix(0.33108827,0,0,0.33108827,-49.701591,6.5552955)"> + <rect + y="116.32738" + x="-60.476192" + height="34.773811" + width="66.523811" + id="rect1388-3" + style="fill:none;fill-opacity:1;stroke:#000000;stroke-width:1.87854159;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + <text + id="text1392-6" + y="138.44888" + x="-53.932037" + style="font-style:normal;font-weight:normal;font-size:3.17499995px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.26458332" + xml:space="preserve"><tspan + style="font-weight:bold;font-size:12.69999981px;stroke-width:0.26458332" + y="138.44888" + x="-53.932037" + id="tspan1390-7" + sodipodi:role="line">Plane 1</tspan></text> + </g> + <g + id="g1428" + transform="matrix(0.33108827,0,0,0.33108827,-46.847588,7.8396518)"> + <rect + y="173.66814" + x="-69.09626" + height="34.773811" + width="66.523811" + id="rect1388-5" + style="fill:none;fill-opacity:1;stroke:#000000;stroke-width:1.87854159;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + <text + id="text1392-3" + y="195.78964" + x="-62.437382" + style="font-style:normal;font-weight:normal;font-size:3.17499995px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.26458332" + xml:space="preserve"><tspan + style="font-weight:bold;font-size:12.69999981px;stroke-width:0.26458332" + y="195.78964" + x="-62.437382" + id="tspan1390-5" + sodipodi:role="line">Plane 2</tspan></text> + </g> + <g + id="g1433-6" + transform="translate(116.41667,-9.0714256)"> + <g + id="g1467" + transform="matrix(0.33108827,0,0,0.33108827,-132.72925,15.626721)"> + <rect + style="fill:none;fill-opacity:1;stroke:#000000;stroke-width:1.87854159;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect1388-3-2" + width="66.523811" + height="34.773811" + x="-60.476192" + y="116.32738" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:3.17499995px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.26458332" + x="-45.380619" + y="138.33725" + id="text1392-6-9"><tspan + sodipodi:role="line" + id="tspan1390-7-1" + x="-45.380619" + y="138.33725" + style="font-weight:bold;font-size:12.69999981px;stroke-width:0.26458332">CRTC</tspan></text> + </g> + <g + id="g1438-2" + transform="matrix(0.33108827,0,0,0.33108827,-92.282164,27.16881)"> + <rect + y="51.228218" + x="-69.09626" + height="34.773811" + width="66.523811" + id="rect1388-7" + style="fill:none;fill-opacity:1;stroke:#000000;stroke-width:1.87854159;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + <text + id="text1392-0" + y="73.238098" + x="-59.718166" + style="font-style:normal;font-weight:normal;font-size:3.17499995px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.26458332" + xml:space="preserve"><tspan + style="font-weight:bold;font-size:12.69999981px;stroke-width:0.26458332" + y="73.238098" + x="-59.718166" + id="tspan1390-9" + sodipodi:role="line">Cursor</tspan></text> + </g> + <g + id="g1433-3" + transform="matrix(0.33108827,0,0,0.33108827,-61.59731,5.6152398)"> + <rect + y="116.32738" + x="-60.476192" + height="34.773811" + width="66.523811" + id="rect1388-3-6" + style="fill:none;fill-opacity:1;stroke:#000000;stroke-width:1.87854159;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + <text + id="text1392-6-0" + y="138.44888" + x="-53.932037" + style="font-style:normal;font-weight:normal;font-size:3.17499995px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.26458332" + xml:space="preserve"><tspan + style="font-weight:bold;font-size:12.69999981px;stroke-width:0.26458332" + y="138.44888" + x="-53.932037" + id="tspan1390-7-6" + sodipodi:role="line">Plane 1</tspan></text> + </g> + <g + id="g1428-2" + transform="matrix(0.33108827,0,0,0.33108827,-58.743296,6.7994816)"> + <rect + y="173.66814" + x="-69.09626" + height="34.773811" + width="66.523811" + id="rect1388-5-6" + style="fill:none;fill-opacity:1;stroke:#000000;stroke-width:1.87854159;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + <text + id="text1392-3-1" + y="195.78964" + x="-62.437382" + style="font-style:normal;font-weight:normal;font-size:3.17499995px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.26458332" + xml:space="preserve"><tspan + style="font-weight:bold;font-size:12.69999981px;stroke-width:0.26458332" + y="195.78964" + x="-62.437382" + id="tspan1390-5-8" + sodipodi:role="line">Plane 2</tspan></text> + </g> + <g + id="g1467-7" + transform="matrix(0.33108827,0,0,0.33108827,-28.233674,5.6152398)"> + <rect + style="fill:none;fill-opacity:1;stroke:#000000;stroke-width:1.87854159;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect1388-3-2-9" + width="66.523811" + height="34.773811" + x="-60.476192" + y="116.32738" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:3.17499995px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.26458332" + x="-45.380619" + y="138.33725" + id="text1392-6-9-2"><tspan + sodipodi:role="line" + id="tspan1390-7-1-0" + x="-45.380619" + y="138.33725" + style="font-weight:bold;font-size:12.69999981px;stroke-width:0.26458332">CRTC</tspan></text> + </g> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:1.05120528px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.08760043" + x="-164.26541" + y="24.302296" + id="text1531"><tspan + sodipodi:role="line" + id="tspan1529" + x="-164.26541" + y="24.302296" + style="font-weight:bold;font-size:4.6720233px;stroke-width:0.08760043">DRM</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:1.05120528px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.08760043" + x="-89.233742" + y="24.341078" + id="text1531-2"><tspan + sodipodi:role="line" + id="tspan1529-3" + x="-89.233742" + y="24.341078" + style="font-weight:bold;font-size:4.6720233px;stroke-width:0.08760043">AMD Hardware</tspan></text> + <path + style="fill:none;stroke:#000000;stroke-width:1.53318286;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow1Send)" + d="m -164.26541,39.407343 h 20.27325 v 11.262913" + id="path1551" + inkscape:connector-curvature="0" + sodipodi:nodetypes="ccc" /> + <path + style="fill:none;stroke:#000000;stroke-width:1.53318286;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow1Send-7)" + d="m -164.11597,80.385815 h 20.27325 v -11.26291" + id="path1551-9" + inkscape:connector-curvature="0" + sodipodi:nodetypes="ccc" /> + <path + style="fill:none;stroke:#000000;stroke-width:1.53318286;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow1Send-7-2)" + d="m -59.24211,70.452123 h 20.273243 V 59.18921" + id="path1551-9-8" + inkscape:connector-curvature="0" + sodipodi:nodetypes="ccc" /> + <path + style="fill:none;stroke:#000000;stroke-width:1.53318286;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow1Send-9)" + d="m -163.61178,59.821549 h 9.26062" + id="path1551-3" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <path + style="fill:none;stroke:#000000;stroke-width:1.53318286;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow1Send-9-6)" + d="m -93.426241,50.16968 h 9.260617" + id="path1551-3-2" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + <path + style="fill:none;stroke:#000000;stroke-width:1.53318286;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow1Send-9-6-9)" + d="m -59.637503,50.169684 h 9.260618" + id="path1551-3-2-1" + inkscape:connector-curvature="0" + sodipodi:nodetypes="cc" /> + </g> + </g> +</svg> diff --git a/Documentation/gpu/amdgpu/display/mpo-overview.rst b/Documentation/gpu/amdgpu/display/mpo-overview.rst new file mode 100644 index 000000000000..0499aa92d08d --- /dev/null +++ b/Documentation/gpu/amdgpu/display/mpo-overview.rst @@ -0,0 +1,242 @@ +======================== +Multiplane Overlay (MPO) +======================== + +.. note:: You will get more from this page if you have already read the + 'Documentation/gpu/amdgpu/display/dcn-overview.rst'. + + +Multiplane Overlay (MPO) allows for multiple framebuffers to be composited via +fixed-function hardware in the display controller rather than using graphics or +compute shaders for composition. This can yield some power savings if it means +the graphics/compute pipelines can be put into low-power states. In summary, +MPO can bring the following benefits: + +* Decreased GPU and CPU workload - no composition shaders needed, no extra + buffer copy needed, GPU can remain idle. +* Plane independent page flips - No need to be tied to global compositor + page-flip present rate, reduced latency, independent timing. + +.. note:: Keep in mind that MPO is all about power-saving; if you want to learn + more about power-save in the display context, check the link: + `Power <https://gitlab.freedesktop.org/pq/color-and-hdr/-/blob/main/doc/power.rst>`__. + +Multiplane Overlay is only available using the DRM atomic model. The atomic +model only uses a single userspace IOCTL for configuring the display hardware +(modesetting, page-flipping, etc) - drmModeAtomicCommit. To query hardware +resources and limitations userspace also calls into drmModeGetResources which +reports back the number of planes, CRTCs, and connectors. There are three types +of DRM planes that the driver can register and work with: + +* ``DRM_PLANE_TYPE_PRIMARY``: Primary planes represent a "main" plane for a + CRTC, primary planes are the planes operated upon by CRTC modesetting and + flipping operations. +* ``DRM_PLANE_TYPE_CURSOR``: Cursor planes represent a "cursor" plane for a + CRTC. Cursor planes are the planes operated upon by the cursor IOCTLs +* ``DRM_PLANE_TYPE_OVERLAY``: Overlay planes represent all non-primary, + non-cursor planes. Some drivers refer to these types of planes as "sprites" + internally. + +To illustrate how it works, let's take a look at a device that exposes the +following planes to userspace: + +* 4 Primary planes (1 per CRTC). +* 4 Cursor planes (1 per CRTC). +* 1 Overlay plane (shared among CRTCs). + +.. note:: Keep in mind that different ASICs might expose other numbers of + planes. + +For this hardware example, we have 4 pipes (if you don't know what AMD pipe +means, look at 'Documentation/gpu/amdgpu/display/dcn-overview.rst', section +"AMD Hardware Pipeline"). Typically most AMD devices operate in a pipe-split +configuration for optimal single display output (e.g., 2 pipes per plane). + +A typical MPO configuration from userspace - 1 primary + 1 overlay on a single +display - will see 4 pipes in use, 2 per plane. + +At least 1 pipe must be used per plane (primary and overlay), so for this +hypothetical hardware that we are using as an example, we have an absolute +limit of 4 planes across all CRTCs. Atomic commits will be rejected for display +configurations using more than 4 planes. Again, it is important to stress that +every DCN has different restrictions; here, we are just trying to provide the +concept idea. + +Plane Restrictions +================== + +AMDGPU imposes restrictions on the use of DRM planes in the driver. + +Atomic commits will be rejected for commits which do not follow these +restrictions: + +* Overlay planes must be in ARGB8888 or XRGB8888 format +* Planes cannot be placed outside of the CRTC destination rectangle +* Planes cannot be downscaled more than 1/4x of their original size +* Planes cannot be upscaled more than 16x of their original size + +Not every property is available on every plane: + +* Only primary planes have color-space and non-RGB format support +* Only overlay planes have alpha blending support + +Cursor Restrictions +=================== + +Before we start to describe some restrictions around cursor and MPO, see the +below image: + +.. kernel-figure:: mpo-cursor.svg + +The image on the left side represents how DRM expects the cursor and planes to +be blended. However, AMD hardware handles cursors differently, as you can see +on the right side; basically, our cursor cannot be drawn outside its associated +plane as it is being treated as part of the plane. Another consequence of that +is that cursors inherit the color and scale from the plane. + +As a result of the above behavior, do not use legacy API to set up the cursor +plane when working with MPO; otherwise, you might encounter unexpected +behavior. + +In short, AMD HW has no dedicated cursor planes. A cursor is attached to +another plane and therefore inherits any scaling or color processing from its +parent plane. + +Use Cases +========= + +Picture-in-Picture (PIP) playback - Underlay strategy +----------------------------------------------------- + +Video playback should be done using the "primary plane as underlay" MPO +strategy. This is a 2 planes configuration: + +* 1 YUV DRM Primary Plane (e.g. NV12 Video) +* 1 RGBA DRM Overlay Plane (e.g. ARGB8888 desktop). The compositor should + prepare the framebuffers for the planes as follows: + - The overlay plane contains general desktop UI, video player controls, and video subtitles + - Primary plane contains one or more videos + +.. note:: Keep in mind that we could extend this configuration to more planes, + but that is currently not supported by our driver yet (maybe if we have a + userspace request in the future, we can change that). + +See below a single-video example: + +.. kernel-figure:: single-display-mpo.svg + +.. note:: We could extend this behavior to more planes, but that is currently + not supported by our driver. + +The video buffer should be used directly for the primary plane. The video can +be scaled and positioned for the desktop using the properties: CRTC_X, CRTC_Y, +CRTC_W, and CRTC_H. The primary plane should also have the color encoding and +color range properties set based on the source content: + +* ``COLOR_RANGE``, ``COLOR_ENCODING`` + +The overlay plane should be the native size of the CRTC. The compositor must +draw a transparent cutout for where the video should be placed on the desktop +(i.e., set the alpha to zero). The primary plane video will be visible through +the underlay. The overlay plane's buffer may remain static while the primary +plane's framebuffer is used for standard double-buffered playback. + +The compositor should create a YUV buffer matching the native size of the CRTC. +Each video buffer should be composited onto this YUV buffer for direct YUV +scanout. The primary plane should have the color encoding and color range +properties set based on the source content: ``COLOR_RANGE``, +``COLOR_ENCODING``. However, be mindful that the source color space and +encoding match for each video since it affect the entire plane. + +The overlay plane should be the native size of the CRTC. The compositor must +draw a transparent cutout for where each video should be placed on the desktop +(i.e., set the alpha to zero). The primary plane videos will be visible through +the underlay. The overlay plane's buffer may remain static while compositing +operations for video playback will be done on the video buffer. + +This kernel interface is validated using IGT GPU Tools. The following tests can +be run to validate positioning, blending, scaling under a variety of sequences +and interactions with operations such as DPMS and S3: + +- ``kms_plane@plane-panning-bottom-right-pipe-*-planes`` +- ``kms_plane@plane-panning-bottom-right-suspend-pipe-*-`` +- ``kms_plane@plane-panning-top-left-pipe-*-`` +- ``kms_plane@plane-position-covered-pipe-*-`` +- ``kms_plane@plane-position-hole-dpms-pipe-*-`` +- ``kms_plane@plane-position-hole-pipe-*-`` +- ``kms_plane_multiple@atomic-pipe-*-tiling-`` +- ``kms_plane_scaling@pipe-*-plane-scaling`` +- ``kms_plane_alpha_blend@pipe-*-alpha-basic`` +- ``kms_plane_alpha_blend@pipe-*-alpha-transparant-fb`` +- ``kms_plane_alpha_blend@pipe-*-alpha-opaque-fb`` +- ``kms_plane_alpha_blend@pipe-*-constant-alpha-min`` +- ``kms_plane_alpha_blend@pipe-*-constant-alpha-mid`` +- ``kms_plane_alpha_blend@pipe-*-constant-alpha-max`` + +Multiple Display MPO +-------------------- + +AMDGPU supports display MPO when using multiple displays; however, this feature +behavior heavily relies on the compositor implementation. Keep in mind that +usespace can define different policies. For example, some OSes can use MPO to +protect the plane that handles the video playback; notice that we don't have +many limitations for a single display. Nonetheless, this manipulation can have +many more restrictions for a multi-display scenario. The below example shows a +video playback in the middle of two displays, and it is up to the compositor to +define a policy on how to handle it: + +.. kernel-figure:: multi-display-hdcp-mpo.svg + +Let's discuss some of the hardware limitations we have when dealing with +multi-display with MPO. + +Limitations +~~~~~~~~~~~ + +For simplicity's sake, for discussing the hardware limitation, this +documentation supposes an example where we have two displays and video playback +that will be moved around different displays. + +* **Hardware limitations** + +From the DCN overview page, each display requires at least one pipe and each +MPO plane needs another pipe. As a result, when the video is in the middle of +the two displays, we need to use 2 pipes. See the example below where we avoid +pipe split: + +- 1 display (1 pipe) + MPO (1 pipe), we will use two pipes +- 2 displays (2 pipes) + MPO (1-2 pipes); we will use 4 pipes. MPO in the + middle of both displays needs 2 pipes. +- 3 Displays (3 pipes) + MPO (1-2 pipes), we need 5 pipes. + +If we use MPO with multiple displays, the userspace has to decide to enable +multiple MPO by the price of limiting the number of external displays supported +or disable it in favor of multiple displays; it is a policy decision. For +example: + +* When ASIC has 3 pipes, AMD hardware can NOT support 2 displays with MPO +* When ASIC has 4 pipes, AMD hardware can NOT support 3 displays with MPO + +Let's briefly explore how userspace can handle these two display configurations +on an ASIC that only supports three pipes. We can have: + +.. kernel-figure:: multi-display-hdcp-mpo-less-pipe-ex.svg + +- Total pipes are 3 +- User lights up 2 displays (2 out of 3 pipes are used) +- User launches video (1 pipe used for MPO) +- Now, if the user moves the video in the middle of 2 displays, one part of the + video won't be MPO since we have used 3/3 pipes. + +* **Scaling limitation** + +MPO cannot handle scaling less than 0.25 and more than x16. For example: + +If 4k video (3840x2160) is playing in windowed mode, the physical size of the +window cannot be smaller than (960x540). + +.. note:: These scaling limitations might vary from ASIC to ASIC. + +* **Size Limitation** + +The minimum MPO size is 12px. diff --git a/Documentation/gpu/amdgpu/display/multi-display-hdcp-mpo-less-pipe-ex.svg b/Documentation/gpu/amdgpu/display/multi-display-hdcp-mpo-less-pipe-ex.svg new file mode 100644 index 000000000000..6d06b39e83fa --- /dev/null +++ b/Documentation/gpu/amdgpu/display/multi-display-hdcp-mpo-less-pipe-ex.svg @@ -0,0 +1,220 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="103.08798mm" + height="30.335283mm" + viewBox="0 0 103.08798 30.335284" + version="1.1" + id="svg8" + inkscape:version="0.92.5 (2060ec1f9f, 2020-04-08)" + sodipodi:docname="multi-display-hdcp-mpo-less-pipe-ex.svg"> + <defs + id="defs2"> + <marker + inkscape:stockid="TriangleOutL" + orient="auto" + refY="0" + refX="0" + id="TriangleOutL" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1133" + d="M 5.77,0 -2.88,5 V -5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="scale(0.8)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="TriangleOutL" + orient="auto" + refY="0" + refX="0" + id="TriangleOutL-6" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1133-0" + d="M 5.77,0 -2.88,5 V -5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="scale(0.8)" /> + </marker> + </defs> + <sodipodi:namedview + id="base" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageopacity="0.0" + inkscape:pageshadow="2" + inkscape:zoom="1.979899" + inkscape:cx="205.69673" + inkscape:cy="33.960031" + inkscape:document-units="mm" + inkscape:current-layer="layer1" + showgrid="false" + inkscape:window-width="1288" + inkscape:window-height="1376" + inkscape:window-x="1272" + inkscape:window-y="27" + inkscape:window-maximized="0" + fit-margin-top="0" + fit-margin-left="0" + fit-margin-right="0" + fit-margin-bottom="0" /> + <metadata + id="metadata5"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title></dc:title> + </cc:Work> + </rdf:RDF> + </metadata> + <g + inkscape:label="Layer 1" + inkscape:groupmode="layer" + id="layer1" + transform="translate(112.75816,51.721433)"> + <rect + style="fill:#ffe680;fill-opacity:1;stroke:#000000;stroke-width:0.62916809;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect836" + width="48.988979" + height="29.48851" + x="-112.44358" + y="-51.189243" + ry="0" /> + <rect + style="fill:#008000;fill-opacity:1;stroke:none;stroke-width:0.38327959;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect834" + width="14.422765" + height="15.872559" + x="-78.227928" + y="-44.469936" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:0.82813358px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.06901112" + x="-71.189278" + y="-48.114422" + id="text844"><tspan + sodipodi:role="line" + x="-71.189278" + y="-48.114422" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan846">Protected</tspan><tspan + sodipodi:role="line" + x="-71.189278" + y="-45.584015" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan2288">MPO plane</tspan></text> + <rect + style="fill:#ffe680;fill-opacity:1;stroke:#000000;stroke-width:0.62916809;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect836-3" + width="48.988979" + height="29.48851" + x="-58.973743" + y="-51.406849" + ry="0" /> + <rect + style="fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.2500253;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect834-6" + width="6.1374092" + height="15.872559" + x="-58.632965" + y="-44.469936" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:0.82813358px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.06901112" + x="-107.96788" + y="-47.033775" + id="text844-7"><tspan + sodipodi:role="line" + x="-107.96788" + y="-47.033775" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:3.52777767px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan846-3">#1</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:0.82813358px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.06901112" + x="-15.20074" + y="-46.715996" + id="text844-7-2"><tspan + sodipodi:role="line" + x="-15.20074" + y="-46.715996" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:3.52777767px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan846-3-9">#2</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:0.82813358px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.06901112" + x="-88.926605" + y="-23.173674" + id="text844-1"><tspan + sodipodi:role="line" + x="-88.926605" + y="-23.173674" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan846-7">Desktop</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:0.82813358px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.06901112" + x="-33.770744" + y="-23.819901" + id="text844-1-0"><tspan + sodipodi:role="line" + x="-33.770744" + y="-23.819901" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan846-7-9">Desktop</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:0.82813358px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.06901112" + x="-75.17498" + y="-41.219398" + id="text844-7-2-3"><tspan + sodipodi:role="line" + x="-75.17498" + y="-41.219398" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:3.52777767px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;fill:#ffffff;stroke-width:0.06901112" + id="tspan846-3-9-6">#3</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:0.82813358px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.06901112" + x="-47.142235" + y="-48.056866" + id="text844-0"><tspan + sodipodi:role="line" + x="-47.142235" + y="-48.056866" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan2288-2">Software</tspan><tspan + sodipodi:role="line" + x="-47.142235" + y="-45.526459" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan2313">Composited Video</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:0.82813358px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.06901112" + x="-36.23288" + y="-34.592064" + id="text844-1-6"><tspan + sodipodi:role="line" + x="-36.23288" + y="-34.592064" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan846-7-1">Video will not be displayed</tspan></text> + </g> +</svg> diff --git a/Documentation/gpu/amdgpu/display/multi-display-hdcp-mpo.svg b/Documentation/gpu/amdgpu/display/multi-display-hdcp-mpo.svg new file mode 100644 index 000000000000..84d53a558b05 --- /dev/null +++ b/Documentation/gpu/amdgpu/display/multi-display-hdcp-mpo.svg @@ -0,0 +1,171 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="103.08798mm" + height="30.335283mm" + viewBox="0 0 103.08798 30.335284" + version="1.1" + id="svg8" + inkscape:version="0.92.5 (2060ec1f9f, 2020-04-08)" + sodipodi:docname="multi-display-hdcp-mpo.svg"> + <defs + id="defs2"> + <marker + inkscape:stockid="TriangleOutL" + orient="auto" + refY="0" + refX="0" + id="TriangleOutL" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1133" + d="M 5.77,0 -2.88,5 V -5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="scale(0.8)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="TriangleOutL" + orient="auto" + refY="0" + refX="0" + id="TriangleOutL-6" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1133-0" + d="M 5.77,0 -2.88,5 V -5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="scale(0.8)" /> + </marker> + </defs> + <sodipodi:namedview + id="base" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageopacity="0.0" + inkscape:pageshadow="2" + inkscape:zoom="1.979899" + inkscape:cx="196.85789" + inkscape:cy="33.960027" + inkscape:document-units="mm" + inkscape:current-layer="layer1" + showgrid="false" + inkscape:window-width="1288" + inkscape:window-height="1376" + inkscape:window-x="1272" + inkscape:window-y="27" + inkscape:window-maximized="0" + fit-margin-top="0" + fit-margin-left="0" + fit-margin-right="0" + fit-margin-bottom="0" /> + <metadata + id="metadata5"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title></dc:title> + </cc:Work> + </rdf:RDF> + </metadata> + <g + inkscape:label="Layer 1" + inkscape:groupmode="layer" + id="layer1" + transform="translate(112.75816,51.721433)"> + <rect + style="fill:#ffe680;fill-opacity:1;stroke:#000000;stroke-width:0.62916809;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect836" + width="48.988979" + height="29.48851" + x="-112.44358" + y="-51.189243" + ry="0" /> + <rect + style="fill:#008000;fill-opacity:1;stroke:none;stroke-width:0.38327959;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect834" + width="14.422765" + height="15.872559" + x="-78.227928" + y="-44.469936" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:0.82813358px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.06901112" + x="-71.189278" + y="-48.114422" + id="text844"><tspan + sodipodi:role="line" + x="-71.189278" + y="-48.114422" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan846">Protected</tspan><tspan + sodipodi:role="line" + x="-71.189278" + y="-45.584015" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan2288">MPO plane</tspan></text> + <rect + style="fill:#ffe680;fill-opacity:1;stroke:#000000;stroke-width:0.62916809;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect836-3" + width="48.988979" + height="29.48851" + x="-58.973743" + y="-51.406849" + ry="0" /> + <rect + style="fill:#008000;fill-opacity:1;stroke:none;stroke-width:0.2500253;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect834-6" + width="6.1374092" + height="15.872559" + x="-58.632965" + y="-44.469936" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:0.82813358px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.06901112" + x="-88.926605" + y="-23.173674" + id="text844-1"><tspan + sodipodi:role="line" + x="-88.926605" + y="-23.173674" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan846-7">Desktop</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:0.82813358px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.06901112" + x="-33.770744" + y="-23.819901" + id="text844-1-0"><tspan + sodipodi:role="line" + x="-33.770744" + y="-23.819901" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan846-7-9">Desktop</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:0.82813358px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.06901112" + x="-70.364128" + y="-35.740372" + id="text844-7-2-3"><tspan + sodipodi:role="line" + x="-70.364128" + y="-35.740372" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:3.52777767px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;fill:#ffffff;stroke-width:0.06901112" + id="tspan846-3-9-6">Video</tspan></text> + </g> +</svg> diff --git a/Documentation/gpu/amdgpu/display/pipeline_4k_no_split.svg b/Documentation/gpu/amdgpu/display/pipeline_4k_no_split.svg new file mode 100644 index 000000000000..5fa289d99fcd --- /dev/null +++ b/Documentation/gpu/amdgpu/display/pipeline_4k_no_split.svg @@ -0,0 +1,958 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="1055.4928" + height="404.60379" + viewBox="0 0 279.26579 107.05142" + version="1.1" + id="svg8" + inkscape:version="0.92.5 (2060ec1f9f, 2020-04-08)" + sodipodi:docname="pipeline_4k_no_split.svg"> + <defs + id="defs2"> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="marker8858" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path8616" + style="fill:#aa00d4;fill-opacity:1;fill-rule:evenodd;stroke:#aa00d4;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Send" + orient="auto" + refY="0" + refX="0" + id="Arrow2Send" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path8622" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-0.3,0,0,-0.3,0.69,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow1Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow1Lend" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path8592" + d="M 0,0 5,-5 -12.5,0 5,5 Z" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="matrix(-0.8,0,0,-0.8,-10,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path8610" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-3" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-6" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-3-2" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-6-9" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-3-2-1" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-6-9-9" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-3-2-7" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-6-9-8" + style="fill:#008000;fill-opacity:1;fill-rule:evenodd;stroke:#008000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-3-4" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-6-5" + style="fill:#008000;fill-opacity:1;fill-rule:evenodd;stroke:#008000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-0" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-3" + style="fill:#008000;fill-opacity:1;fill-rule:evenodd;stroke:#008000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-6" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-1" + style="fill:#008000;fill-opacity:1;fill-rule:evenodd;stroke:#008000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-3-2-6" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-6-9-1" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-0-7" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-3-4" + style="fill:#008000;fill-opacity:1;fill-rule:evenodd;stroke:#008000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-6-3" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-1-0" + style="fill:#008000;fill-opacity:1;fill-rule:evenodd;stroke:#008000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-3-2-8" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-6-9-6" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-3" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-6" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="marker8858-3" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path8616-5" + style="fill:#00ffcc;fill-opacity:1;fill-rule:evenodd;stroke:#00ffcc;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-3-3" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-6-56" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-0-2" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-3-9" + style="fill:#008000;fill-opacity:1;fill-rule:evenodd;stroke:#008000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-9" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-3" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-94" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-7" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-94-6" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-7-9" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-94-6-7" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-7-9-4" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-94-6-0" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-7-9-7" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-94-6-0-1" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-7-9-7-4" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-94-6-0-2" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-7-9-7-6" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-94-6-0-2-4" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-7-9-7-6-9" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-94-8" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-7-7" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-94-6-0-2-7" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-7-9-7-6-6" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + </defs> + <sodipodi:namedview + id="base" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageopacity="0.0" + inkscape:pageshadow="2" + inkscape:zoom="1.4" + inkscape:cx="213.41584" + inkscape:cy="301.17934" + inkscape:document-units="mm" + inkscape:current-layer="layer1" + showgrid="false" + inkscape:window-width="2560" + inkscape:window-height="1376" + inkscape:window-x="0" + inkscape:window-y="27" + inkscape:window-maximized="1" + showguides="false" + fit-margin-top="0" + fit-margin-left="0" + fit-margin-right="0" + fit-margin-bottom="0" + units="px" + inkscape:snap-global="false" /> + <metadata + id="metadata5"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title /> + </cc:Work> + </rdf:RDF> + </metadata> + <g + inkscape:label="Layer 1" + inkscape:groupmode="layer" + id="layer1" + transform="translate(349.34521,-0.81564989)"> + <rect + style="fill:none;stroke:#000000;stroke-width:1.00353587;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none" + id="rect834" + width="30.251244" + height="88.477814" + x="-317.81958" + y="14.782127" + ry="2.5590618e-06" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + x="-314.73792" + y="21.83947" + id="text838"><tspan + sodipodi:role="line" + id="tspan836" + x="-314.73792" + y="21.83947" + style="stroke-width:0.16370411">DCHUB</tspan></text> + <g + id="g2025" + transform="translate(-2.4916954,-1.2533369)"> + <text + id="text838-5" + y="31.969406" + x="-254.53119" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + xml:space="preserve"><tspan + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="31.969406" + x="-254.53119" + id="tspan836-3" + sodipodi:role="line">DPP</tspan><tspan + id="tspan936" + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="40.15461" + x="-254.53119" + sodipodi:role="line">(0)</tspan></text> + <rect + ry="7.8154301e-07" + y="20.596174" + x="-269.66983" + height="27.021315" + width="30.696135" + id="rect834-5" + style="fill:none;stroke:#000000;stroke-width:0.55864918;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none" /> + </g> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.1637041" + x="-297.75696" + y="109.44505" + id="text1063"><tspan + sodipodi:role="line" + id="tspan1061" + x="-297.75696" + y="115.23865" + style="stroke-width:0.1637041" /></text> + <g + id="g1878" + transform="translate(-0.62971878)"> + <text + id="text846" + y="30.716068" + x="-302.27368" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#44aa00;fill-opacity:1;stroke:none;stroke-width:0.16370411" + xml:space="preserve"><tspan + style="text-align:center;text-anchor:middle;fill:#44aa00;stroke-width:0.16370411" + y="30.716068" + x="-302.27368" + id="tspan844" + sodipodi:role="line">HUBP</tspan><tspan + id="tspan863" + style="text-align:center;text-anchor:middle;fill:#44aa00;stroke-width:0.16370411" + y="38.901276" + x="-302.27368" + sodipodi:role="line">(0)</tspan></text> + <g + id="g1853"> + <rect + style="fill:none;fill-opacity:1;stroke:#55d400;stroke-width:0.94157624;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect1850" + width="24.708241" + height="17.224693" + x="-314.41837" + y="24.241148" /> + </g> + </g> + <g + transform="translate(-0.62971878,18.810271)" + id="g1878-1"> + <text + id="text846-2" + y="30.716068" + x="-302.27368" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#44aa00;fill-opacity:1;stroke:none;stroke-width:0.16370411" + xml:space="preserve"><tspan + style="text-align:center;text-anchor:middle;fill:#44aa00;stroke-width:0.16370411" + y="30.716068" + x="-302.27368" + id="tspan844-7" + sodipodi:role="line">HUBP</tspan><tspan + id="tspan863-0" + style="text-align:center;text-anchor:middle;fill:#44aa00;stroke-width:0.16370411" + y="38.901276" + x="-302.27368" + sodipodi:role="line">(1)</tspan></text> + <g + id="g1853-9"> + <rect + style="fill:none;fill-opacity:1;stroke:#55d400;stroke-width:0.94157624;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect1850-3" + width="24.708241" + height="17.224693" + x="-314.41837" + y="24.241148" /> + </g> + </g> + <g + transform="translate(-0.62971878,57.029814)" + id="g1878-8"> + <text + id="text846-7" + y="30.716068" + x="-302.27368" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#44aa00;fill-opacity:1;stroke:none;stroke-width:0.16370411" + xml:space="preserve"><tspan + style="text-align:center;text-anchor:middle;fill:#44aa00;stroke-width:0.16370411" + y="30.716068" + x="-302.27368" + id="tspan844-9" + sodipodi:role="line">HUBP</tspan><tspan + id="tspan863-20" + style="text-align:center;text-anchor:middle;fill:#44aa00;stroke-width:0.16370411" + y="38.901276" + x="-302.27368" + sodipodi:role="line">(5)</tspan></text> + <g + id="g1853-2"> + <rect + style="fill:none;fill-opacity:1;stroke:#55d400;stroke-width:0.94157624;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect1850-37" + width="24.708241" + height="17.224693" + x="-314.41837" + y="24.241148" /> + </g> + </g> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:3.17499995px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.26458332" + x="-310.7348" + y="72.106789" + id="text8862-5"><tspan + sodipodi:role="line" + id="tspan8860-9" + x="-310.7348" + y="72.106789" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:14.11111069px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';fill:#44aa00;stroke-width:0.26458332">...</tspan></text> + <path + style="fill:none;stroke:#ff0000;stroke-width:0.96187615;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow2Mend-94)" + d="m -288.90777,32.862737 h 14.20296" + id="path1171" + inkscape:connector-curvature="0" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:3.17499995px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.26458332" + x="-264.85431" + y="62.072891" + id="text8862-5-8"><tspan + sodipodi:role="line" + id="tspan8860-9-4" + x="-264.85431" + y="62.072891" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:14.11111069px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';fill:#000000;stroke-width:0.26458332">...</tspan></text> + <g + id="g2025-5" + transform="translate(40.522337,-1.1484419)" /> + <g + id="g7343" + transform="translate(40.522337,-1.2533369)"> + <text + id="text838-5-6" + y="31.969406" + x="-254.53119" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + xml:space="preserve"><tspan + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="31.969406" + x="-254.53119" + id="tspan836-3-3" + sodipodi:role="line">MPC</tspan><tspan + id="tspan936-2" + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="40.15461" + x="-254.53119" + sodipodi:role="line">(0)</tspan></text> + <rect + ry="7.8154301e-07" + y="20.596174" + x="-269.66983" + height="27.021315" + width="30.696135" + id="rect834-5-0" + style="fill:none;stroke:#000000;stroke-width:0.55864918;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none" /> + </g> + <g + id="g7343-2" + transform="translate(84.178583,-1.2533369)"> + <text + id="text838-5-6-54" + y="31.969406" + x="-254.53119" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + xml:space="preserve"><tspan + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="31.969406" + x="-254.53119" + id="tspan836-3-3-7" + sodipodi:role="line">OPP</tspan><tspan + id="tspan936-2-44" + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="40.15461" + x="-254.53119" + sodipodi:role="line">(0)</tspan></text> + <rect + ry="7.8154301e-07" + y="20.596174" + x="-269.66983" + height="27.021315" + width="30.696135" + id="rect834-5-0-3" + style="fill:none;stroke:#000000;stroke-width:0.55864918;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none" /> + </g> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:3.17499995px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.26458332" + x="-221.84029" + y="62.072891" + id="text8862-5-8-6"><tspan + sodipodi:role="line" + id="tspan8860-9-4-5" + x="-221.84029" + y="62.072891" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:14.11111069px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';fill:#000000;stroke-width:0.26458332">...</tspan></text> + <path + style="fill:none;stroke:#ff0000;stroke-width:0.83149505;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow2Mend-94-6)" + d="m -240.90479,32.86192 h 10.61353" + id="path1171-3" + inkscape:connector-curvature="0" /> + <path + style="fill:none;stroke:#ff0000;stroke-width:0.83149505;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow2Mend-94-6-0)" + d="m -198.19009,32.86192 h 10.61353" + id="path1171-3-8" + inkscape:connector-curvature="0" /> + <g + id="g7343-2-2" + transform="translate(127.15447,-1.1484419)"> + <text + id="text838-5-6-54-0" + y="65.122154" + x="-254.32814" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + xml:space="preserve"><tspan + id="tspan936-2-44-8" + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="65.122154" + x="-254.32814" + sodipodi:role="line">OPTC</tspan></text> + <rect + ry="2.4256708e-06" + y="20.805576" + x="-269.46042" + height="83.865906" + width="30.277332" + id="rect834-5-0-3-9" + style="fill:none;stroke:#000000;stroke-width:0.97745234;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none" /> + </g> + <path + style="fill:none;stroke:#ff0000;stroke-width:0.83149505;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow2Mend-94-6-0-2)" + d="m -154.34485,32.86192 h 10.61353" + id="path1171-3-8-6" + inkscape:connector-curvature="0" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:3.17499995px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.26458332" + x="-178.18404" + y="62.072891" + id="text8862-5-8-6-0"><tspan + sodipodi:role="line" + id="tspan8860-9-4-5-4" + x="-178.18404" + y="62.072891" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:14.11111069px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';fill:#000000;stroke-width:0.26458332">...</tspan></text> + <path + style="fill:#000000;stroke:#000000;stroke-width:0.96187615;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow2Mend-94-8)" + d="m -335.20986,59.030276 h 14.20296" + id="path1171-17" + inkscape:connector-curvature="0" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + x="-349.77686" + y="61.404655" + id="text838-2"><tspan + sodipodi:role="line" + id="tspan836-7" + x="-349.77686" + y="61.404655" + style="stroke-width:0.16370411">SDP</tspan></text> + <path + style="fill:none;stroke:#000000;stroke-width:1.32291663;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:1.32291667, 1.32291667;stroke-dashoffset:0;stroke-opacity:1" + d="M -279.04164,107.86706 V 0.89985833" + id="path11907" + inkscape:connector-curvature="0" /> + <path + style="fill:none;stroke:#000000;stroke-width:1.32291663;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:1.3229167, 1.3229167;stroke-dashoffset:0;stroke-opacity:1" + d="M -235.57438,107.86707 V 0.89985663" + id="path11907-6-1" + inkscape:connector-curvature="0" /> + <path + style="fill:none;stroke:#000000;stroke-width:1.32291663;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:1.32291671, 1.32291671;stroke-dashoffset:0;stroke-opacity:1" + d="M -149.96277,107.86707 V 0.89985223" + id="path11907-6-1-0" + inkscape:connector-curvature="0" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + x="-257.38275" + y="5.003336" + id="text838-6"><tspan + sodipodi:role="line" + id="tspan836-1" + x="-257.38275" + y="5.003336" + style="font-size:4.93888903px;text-align:center;text-anchor:middle;stroke-width:0.16370411">DPPCLK</tspan><tspan + sodipodi:role="line" + x="-257.38275" + y="13.188541" + style="font-size:4.93888903px;text-align:center;text-anchor:middle;stroke-width:0.16370411" + id="tspan12658">535.916Mhz</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + x="-192.85298" + y="5.003336" + id="text838-6-5"><tspan + sodipodi:role="line" + id="tspan836-1-9" + x="-192.85298" + y="5.003336" + style="font-size:4.93888903px;text-align:center;text-anchor:middle;stroke-width:0.16370411">DISPCLK</tspan><tspan + sodipodi:role="line" + x="-192.85298" + y="13.188541" + style="font-size:4.93888903px;text-align:center;text-anchor:middle;stroke-width:0.16370411" + id="tspan12662">541.275 Mhz</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + x="-302.03766" + y="5.003336" + id="text838-6-5-4"><tspan + sodipodi:role="line" + id="tspan836-1-9-9" + x="-312.23135" + y="5.003336" + style="font-size:4.93888903px;stroke-width:0.16370411;text-anchor:middle;text-align:center">DCFCLK</tspan><tspan + sodipodi:role="line" + x="-312.23135" + y="13.188541" + style="font-size:4.93888903px;stroke-width:0.16370411;text-anchor:middle;text-align:center" + id="tspan12660">506 Mhz</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + x="-96.075348" + y="4.568048" + id="text838-6-5-0"><tspan + sodipodi:role="line" + id="tspan836-1-9-91" + x="-96.075348" + y="4.568048" + style="font-size:4.93888903px;stroke-width:0.16370411">SymCLK</tspan></text> + <g + id="g7343-2-2-7" + transform="translate(168.61494,-1.1484419)"> + <text + id="text838-5-6-54-0-7" + y="65.122154" + x="-254.32814" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + xml:space="preserve"><tspan + id="tspan936-2-44-8-1" + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="65.122154" + x="-254.32814" + sodipodi:role="line">DIO</tspan></text> + <rect + ry="2.4256708e-06" + y="20.805576" + x="-269.46042" + height="83.865906" + width="30.277332" + id="rect834-5-0-3-9-1" + style="fill:none;stroke:#000000;stroke-width:0.97745234;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none" /> + </g> + <path + style="fill:none;stroke:#000000;stroke-width:1.32291663;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:1.32291672, 1.32291672;stroke-dashoffset:0;stroke-opacity:1" + d="M -108.38539,107.86707 V 0.89985092" + id="path11907-6-1-0-5" + inkscape:connector-curvature="0" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + x="-143.52292" + y="5.0467439" + id="text838-6-5-0-9"><tspan + sodipodi:role="line" + id="tspan836-1-9-91-7" + x="-143.52292" + y="5.0467439" + style="font-size:4.93888903px;stroke-width:0.16370411">VirtualPCLK</tspan></text> + <path + style="fill:none;stroke:#ff0000;stroke-width:0.83149505;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow2Mend-94-6-0-2-7)" + d="m -112.24183,60.747629 h 10.61353" + id="path1171-3-8-6-7" + inkscape:connector-curvature="0" /> + </g> +</svg> diff --git a/Documentation/gpu/amdgpu/display/pipeline_4k_split.svg b/Documentation/gpu/amdgpu/display/pipeline_4k_split.svg new file mode 100644 index 000000000000..b43119e7eb8a --- /dev/null +++ b/Documentation/gpu/amdgpu/display/pipeline_4k_split.svg @@ -0,0 +1,1062 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="1055.4928" + height="404.60379" + viewBox="0 0 279.26579 107.05142" + version="1.1" + id="svg8" + inkscape:version="0.92.5 (2060ec1f9f, 2020-04-08)" + sodipodi:docname="pipeline_no_split_4k.svg"> + <defs + id="defs2"> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="marker8858" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path8616" + style="fill:#aa00d4;fill-opacity:1;fill-rule:evenodd;stroke:#aa00d4;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Send" + orient="auto" + refY="0" + refX="0" + id="Arrow2Send" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path8622" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-0.3,0,0,-0.3,0.69,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow1Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow1Lend" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path8592" + d="M 0,0 5,-5 -12.5,0 5,5 Z" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="matrix(-0.8,0,0,-0.8,-10,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Lend" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path8610" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="matrix(-1.1,0,0,-1.1,-1.1,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-3" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-6" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-3-2" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-6-9" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-3-2-1" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-6-9-9" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-3-2-7" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-6-9-8" + style="fill:#008000;fill-opacity:1;fill-rule:evenodd;stroke:#008000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-3-4" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-6-5" + style="fill:#008000;fill-opacity:1;fill-rule:evenodd;stroke:#008000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-0" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-3" + style="fill:#008000;fill-opacity:1;fill-rule:evenodd;stroke:#008000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-6" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-1" + style="fill:#008000;fill-opacity:1;fill-rule:evenodd;stroke:#008000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-3-2-6" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-6-9-1" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-0-7" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-3-4" + style="fill:#008000;fill-opacity:1;fill-rule:evenodd;stroke:#008000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-6-3" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-1-0" + style="fill:#008000;fill-opacity:1;fill-rule:evenodd;stroke:#008000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-3-2-8" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-6-9-6" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-3" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-6" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="marker8858-3" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path8616-5" + style="fill:#00ffcc;fill-opacity:1;fill-rule:evenodd;stroke:#00ffcc;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-3-3" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-6-56" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-8-0-2" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1200-9-3-9" + style="fill:#008000;fill-opacity:1;fill-rule:evenodd;stroke:#008000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-9" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-3" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-94" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-7" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-94-6" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-7-9" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-94-6-7" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-7-9-4" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-94-6-0" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-7-9-7" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-94-6-0-1" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-7-9-7-4" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-94-6-0-2" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-7-9-7-6" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-94-6-0-2-4" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-7-9-7-6-9" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-94-8" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-7-7" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0" + refX="0" + id="Arrow2Mend-94-6-0-2-7" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1200-7-9-7-6-6" + style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1" + d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z" + transform="scale(-0.6)" + inkscape:connector-curvature="0" /> + </marker> + </defs> + <sodipodi:namedview + id="base" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageopacity="0.0" + inkscape:pageshadow="2" + inkscape:zoom="1.4" + inkscape:cx="491.27298" + inkscape:cy="306.89362" + inkscape:document-units="mm" + inkscape:current-layer="layer1" + showgrid="false" + inkscape:window-width="2560" + inkscape:window-height="1376" + inkscape:window-x="0" + inkscape:window-y="27" + inkscape:window-maximized="1" + showguides="false" + fit-margin-top="0" + fit-margin-left="0" + fit-margin-right="0" + fit-margin-bottom="0" + units="px" + inkscape:snap-global="false" /> + <metadata + id="metadata5"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title></dc:title> + </cc:Work> + </rdf:RDF> + </metadata> + <g + inkscape:label="Layer 1" + inkscape:groupmode="layer" + id="layer1" + transform="translate(349.34521,-0.81564989)"> + <rect + style="fill:none;stroke:#000000;stroke-width:1.00353587;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none" + id="rect834" + width="30.251244" + height="88.477814" + x="-317.81958" + y="14.782127" + ry="2.5590618e-06" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + x="-314.73792" + y="21.83947" + id="text838"><tspan + sodipodi:role="line" + id="tspan836" + x="-314.73792" + y="21.83947" + style="stroke-width:0.16370411">DCHUB</tspan></text> + <g + id="g2025" + transform="translate(-2.4916954,-1.2533369)"> + <text + id="text838-5" + y="31.969406" + x="-254.53119" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + xml:space="preserve"><tspan + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="31.969406" + x="-254.53119" + id="tspan836-3" + sodipodi:role="line">DPP</tspan><tspan + id="tspan936" + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="40.15461" + x="-254.53119" + sodipodi:role="line">(0)</tspan></text> + <rect + ry="7.8154301e-07" + y="20.596174" + x="-269.66983" + height="27.021315" + width="30.696135" + id="rect834-5" + style="fill:none;stroke:#000000;stroke-width:0.55864918;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none" /> + </g> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.1637041" + x="-297.75696" + y="109.44505" + id="text1063"><tspan + sodipodi:role="line" + id="tspan1061" + x="-297.75696" + y="115.23865" + style="stroke-width:0.1637041" /></text> + <g + id="g1878" + transform="translate(-0.62971878)"> + <text + id="text846" + y="30.716068" + x="-302.27368" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#44aa00;fill-opacity:1;stroke:none;stroke-width:0.16370411" + xml:space="preserve"><tspan + style="text-align:center;text-anchor:middle;fill:#44aa00;stroke-width:0.16370411" + y="30.716068" + x="-302.27368" + id="tspan844" + sodipodi:role="line">HUBP</tspan><tspan + id="tspan863" + style="text-align:center;text-anchor:middle;fill:#44aa00;stroke-width:0.16370411" + y="38.901276" + x="-302.27368" + sodipodi:role="line">(0)</tspan></text> + <g + id="g1853"> + <rect + style="fill:none;fill-opacity:1;stroke:#55d400;stroke-width:0.94157624;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect1850" + width="24.708241" + height="17.224693" + x="-314.41837" + y="24.241148" /> + </g> + </g> + <g + transform="translate(-0.62971878,18.810271)" + id="g1878-1"> + <text + id="text846-2" + y="30.716068" + x="-302.27368" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#44aa00;fill-opacity:1;stroke:none;stroke-width:0.16370411" + xml:space="preserve"><tspan + style="text-align:center;text-anchor:middle;fill:#44aa00;stroke-width:0.16370411" + y="30.716068" + x="-302.27368" + id="tspan844-7" + sodipodi:role="line">HUBP</tspan><tspan + id="tspan863-0" + style="text-align:center;text-anchor:middle;fill:#44aa00;stroke-width:0.16370411" + y="38.901276" + x="-302.27368" + sodipodi:role="line">(1)</tspan></text> + <g + id="g1853-9"> + <rect + style="fill:none;fill-opacity:1;stroke:#55d400;stroke-width:0.94157624;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect1850-3" + width="24.708241" + height="17.224693" + x="-314.41837" + y="24.241148" /> + </g> + </g> + <g + transform="translate(-0.62971878,57.029814)" + id="g1878-8"> + <text + id="text846-7" + y="30.716068" + x="-302.27368" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#44aa00;fill-opacity:1;stroke:none;stroke-width:0.16370411" + xml:space="preserve"><tspan + style="text-align:center;text-anchor:middle;fill:#44aa00;stroke-width:0.16370411" + y="30.716068" + x="-302.27368" + id="tspan844-9" + sodipodi:role="line">HUBP</tspan><tspan + id="tspan863-20" + style="text-align:center;text-anchor:middle;fill:#44aa00;stroke-width:0.16370411" + y="38.901276" + x="-302.27368" + sodipodi:role="line">(5)</tspan></text> + <g + id="g1853-2"> + <rect + style="fill:none;fill-opacity:1;stroke:#55d400;stroke-width:0.94157624;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect1850-37" + width="24.708241" + height="17.224693" + x="-314.41837" + y="24.241148" /> + </g> + </g> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:3.17499995px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.26458332" + x="-310.7348" + y="72.106789" + id="text8862-5"><tspan + sodipodi:role="line" + id="tspan8860-9" + x="-310.7348" + y="72.106789" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:14.11111069px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';fill:#44aa00;stroke-width:0.26458332">...</tspan></text> + <g + id="g2031" + transform="translate(-2.4568452,2.9399645)"> + <text + id="text838-5-3" + y="84.805916" + x="-254.56604" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + xml:space="preserve"><tspan + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="84.805916" + x="-254.56604" + id="tspan836-3-6" + sodipodi:role="line">DPP</tspan><tspan + id="tspan936-1" + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="92.991119" + x="-254.56604" + sodipodi:role="line">(5)</tspan></text> + <rect + ry="7.8154301e-07" + y="73.432686" + x="-269.70468" + height="27.021317" + width="30.696136" + id="rect834-5-2" + style="fill:none;stroke:#000000;stroke-width:0.55864918;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none" /> + </g> + <path + style="fill:none;stroke:#ff0000;stroke-width:0.96187615;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow2Mend-9)" + d="m -289.17681,89.892551 h 14.20296" + id="path1171-1" + inkscape:connector-curvature="0" /> + <path + style="fill:none;stroke:#ff0000;stroke-width:0.96187615;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow2Mend-94)" + d="m -288.90777,32.862737 h 14.20296" + id="path1171" + inkscape:connector-curvature="0" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:3.17499995px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.26458332" + x="-264.85431" + y="62.072891" + id="text8862-5-8"><tspan + sodipodi:role="line" + id="tspan8860-9-4" + x="-264.85431" + y="62.072891" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:14.11111069px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';fill:#000000;stroke-width:0.26458332">...</tspan></text> + <g + id="g2025-5" + transform="translate(40.522337,-1.1484419)" /> + <g + id="g7343" + transform="translate(40.522337,-1.2533369)"> + <text + id="text838-5-6" + y="31.969406" + x="-254.53119" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + xml:space="preserve"><tspan + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="31.969406" + x="-254.53119" + id="tspan836-3-3" + sodipodi:role="line">MPC</tspan><tspan + id="tspan936-2" + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="40.15461" + x="-254.53119" + sodipodi:role="line">(0)</tspan></text> + <rect + ry="7.8154301e-07" + y="20.596174" + x="-269.66983" + height="27.021315" + width="30.696135" + id="rect834-5-0" + style="fill:none;stroke:#000000;stroke-width:0.55864918;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none" /> + </g> + <g + id="g7343-1" + transform="translate(40.522337,56.303939)"> + <text + id="text838-5-6-5" + y="31.969406" + x="-254.53119" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + xml:space="preserve"><tspan + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="31.969406" + x="-254.53119" + id="tspan836-3-3-5" + sodipodi:role="line">MPC</tspan><tspan + id="tspan936-2-4" + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="40.15461" + x="-254.53119" + sodipodi:role="line">(5)</tspan></text> + <rect + ry="7.8154301e-07" + y="20.596174" + x="-269.66983" + height="27.021315" + width="30.696135" + id="rect834-5-0-7" + style="fill:none;stroke:#000000;stroke-width:0.55864918;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none" /> + </g> + <g + id="g7343-2" + transform="translate(84.178583,-1.2533369)"> + <text + id="text838-5-6-54" + y="31.969406" + x="-254.53119" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + xml:space="preserve"><tspan + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="31.969406" + x="-254.53119" + id="tspan836-3-3-7" + sodipodi:role="line">OPP</tspan><tspan + id="tspan936-2-44" + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="40.15461" + x="-254.53119" + sodipodi:role="line">(0)</tspan></text> + <rect + ry="7.8154301e-07" + y="20.596174" + x="-269.66983" + height="27.021315" + width="30.696135" + id="rect834-5-0-3" + style="fill:none;stroke:#000000;stroke-width:0.55864918;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none" /> + </g> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:3.17499995px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.26458332" + x="-221.84029" + y="62.072891" + id="text8862-5-8-6"><tspan + sodipodi:role="line" + id="tspan8860-9-4-5" + x="-221.84029" + y="62.072891" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:14.11111069px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';fill:#000000;stroke-width:0.26458332">...</tspan></text> + <path + style="fill:none;stroke:#ff0000;stroke-width:0.83149505;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow2Mend-94-6)" + d="m -240.90479,32.86192 h 10.61353" + id="path1171-3" + inkscape:connector-curvature="0" /> + <path + style="fill:none;stroke:#ff0000;stroke-width:0.83149505;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow2Mend-94-6-7)" + d="m -241.09039,89.891298 h 10.61353" + id="path1171-3-5" + inkscape:connector-curvature="0" /> + <path + style="fill:none;stroke:#ff0000;stroke-width:0.83149505;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow2Mend-94-6-0)" + d="m -198.19009,32.86192 h 10.61353" + id="path1171-3-8" + inkscape:connector-curvature="0" /> + <g + id="g7343-2-6" + transform="translate(84.178583,56.303939)"> + <text + id="text838-5-6-54-8" + y="31.969406" + x="-254.53119" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + xml:space="preserve"><tspan + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="31.969406" + x="-254.53119" + id="tspan836-3-3-7-8" + sodipodi:role="line">OPP</tspan><tspan + id="tspan936-2-44-4" + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="40.15461" + x="-254.53119" + sodipodi:role="line">(0)</tspan></text> + <rect + ry="7.8154301e-07" + y="20.596174" + x="-269.66983" + height="27.021315" + width="30.696135" + id="rect834-5-0-3-3" + style="fill:none;stroke:#000000;stroke-width:0.55864918;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none" /> + </g> + <path + style="fill:none;stroke:#ff0000;stroke-width:0.83149505;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow2Mend-94-6-0-1)" + d="m -198.00111,89.891298 h 10.61353" + id="path1171-3-8-9" + inkscape:connector-curvature="0" /> + <g + id="g7343-2-2" + transform="translate(127.15447,-1.1484419)"> + <text + id="text838-5-6-54-0" + y="65.122154" + x="-254.32814" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + xml:space="preserve"><tspan + id="tspan936-2-44-8" + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="65.122154" + x="-254.32814" + sodipodi:role="line">OPTC</tspan></text> + <rect + ry="2.4256708e-06" + y="20.805576" + x="-269.46042" + height="83.865906" + width="30.277332" + id="rect834-5-0-3-9" + style="fill:none;stroke:#000000;stroke-width:0.97745234;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none" /> + </g> + <path + style="fill:none;stroke:#ff0000;stroke-width:0.83149505;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow2Mend-94-6-0-2)" + d="m -154.34485,32.86192 h 10.61353" + id="path1171-3-8-6" + inkscape:connector-curvature="0" /> + <path + style="fill:none;stroke:#ff0000;stroke-width:0.83149505;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow2Mend-94-6-0-2-4)" + d="m -154.34485,89.891298 h 10.61353" + id="path1171-3-8-6-5" + inkscape:connector-curvature="0" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:3.17499995px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.26458332" + x="-178.18404" + y="62.072891" + id="text8862-5-8-6-0"><tspan + sodipodi:role="line" + id="tspan8860-9-4-5-4" + x="-178.18404" + y="62.072891" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:14.11111069px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';fill:#000000;stroke-width:0.26458332">...</tspan></text> + <path + style="fill:#000000;stroke:#000000;stroke-width:0.96187615;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow2Mend-94-8)" + d="m -335.20986,59.030276 h 14.20296" + id="path1171-17" + inkscape:connector-curvature="0" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + x="-349.77686" + y="61.404655" + id="text838-2"><tspan + sodipodi:role="line" + id="tspan836-7" + x="-349.77686" + y="61.404655" + style="stroke-width:0.16370411">SDP</tspan></text> + <path + style="fill:none;stroke:#000000;stroke-width:1.32291663;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:1.32291667, 1.32291667;stroke-dashoffset:0;stroke-opacity:1" + d="M -279.04164,107.86706 V 0.89985833" + id="path11907" + inkscape:connector-curvature="0" /> + <path + style="fill:none;stroke:#000000;stroke-width:1.32291663;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:1.3229167, 1.3229167;stroke-dashoffset:0;stroke-opacity:1" + d="M -235.57438,107.86707 V 0.89985663" + id="path11907-6-1" + inkscape:connector-curvature="0" /> + <path + style="fill:none;stroke:#000000;stroke-width:1.32291663;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:1.32291671, 1.32291671;stroke-dashoffset:0;stroke-opacity:1" + d="M -149.96277,107.86707 V 0.89985223" + id="path11907-6-1-0" + inkscape:connector-curvature="0" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + x="-257.38275" + y="5.003336" + id="text838-6"><tspan + sodipodi:role="line" + id="tspan836-1" + x="-257.38275" + y="5.003336" + style="font-size:4.93888903px;text-align:center;text-anchor:middle;stroke-width:0.16370411">DPPCLK</tspan><tspan + sodipodi:role="line" + x="-257.38275" + y="13.188541" + style="font-size:4.93888903px;text-align:center;text-anchor:middle;stroke-width:0.16370411" + id="tspan12658">267.958Mhz</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + x="-192.85298" + y="5.003336" + id="text838-6-5"><tspan + sodipodi:role="line" + id="tspan836-1-9" + x="-192.85298" + y="5.003336" + style="font-size:4.93888903px;text-align:center;text-anchor:middle;stroke-width:0.16370411">DISPCLK</tspan><tspan + sodipodi:role="line" + x="-192.85298" + y="13.188541" + style="font-size:4.93888903px;text-align:center;text-anchor:middle;stroke-width:0.16370411" + id="tspan12662">541.275 Mhz</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + x="-302.03766" + y="5.003336" + id="text838-6-5-4"><tspan + sodipodi:role="line" + id="tspan836-1-9-9" + x="-312.23135" + y="5.003336" + style="font-size:4.93888903px;stroke-width:0.16370411;text-anchor:middle;text-align:center">DCFCLK</tspan><tspan + sodipodi:role="line" + x="-312.23135" + y="13.188541" + style="font-size:4.93888903px;stroke-width:0.16370411;text-anchor:middle;text-align:center" + id="tspan12660">506 Mhz</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + x="-96.075348" + y="4.568048" + id="text838-6-5-0"><tspan + sodipodi:role="line" + id="tspan836-1-9-91" + x="-96.075348" + y="4.568048" + style="font-size:4.93888903px;stroke-width:0.16370411">SymCLK</tspan></text> + <g + id="g7343-2-2-7" + transform="translate(168.61494,-1.1484419)"> + <text + id="text838-5-6-54-0-7" + y="65.122154" + x="-254.32814" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + xml:space="preserve"><tspan + id="tspan936-2-44-8-1" + style="text-align:center;text-anchor:middle;stroke-width:0.16370411" + y="65.122154" + x="-254.32814" + sodipodi:role="line">DIO</tspan></text> + <rect + ry="2.4256708e-06" + y="20.805576" + x="-269.46042" + height="83.865906" + width="30.277332" + id="rect834-5-0-3-9-1" + style="fill:none;stroke:#000000;stroke-width:0.97745234;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none" /> + </g> + <path + style="fill:none;stroke:#000000;stroke-width:1.32291663;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:1.32291672, 1.32291672;stroke-dashoffset:0;stroke-opacity:1" + d="M -108.38539,107.86707 V 0.89985092" + id="path11907-6-1-0-5" + inkscape:connector-curvature="0" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:6.54816437px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.16370411" + x="-143.52292" + y="5.0467439" + id="text838-6-5-0-9"><tspan + sodipodi:role="line" + id="tspan836-1-9-91-7" + x="-143.52292" + y="5.0467439" + style="font-size:4.93888903px;stroke-width:0.16370411">VirtualPCLK</tspan></text> + <path + style="fill:none;stroke:#ff0000;stroke-width:0.83149505;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow2Mend-94-6-0-2-7)" + d="m -112.24183,60.747629 h 10.61353" + id="path1171-3-8-6-7" + inkscape:connector-curvature="0" /> + </g> +</svg> diff --git a/Documentation/gpu/amdgpu/display/single-display-mpo-multi-video.svg b/Documentation/gpu/amdgpu/display/single-display-mpo-multi-video.svg new file mode 100644 index 000000000000..fa807115cfe2 --- /dev/null +++ b/Documentation/gpu/amdgpu/display/single-display-mpo-multi-video.svg @@ -0,0 +1,339 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="112.16296mm" + height="93.314507mm" + viewBox="0 0 112.16296 93.314508" + version="1.1" + id="svg8" + inkscape:version="0.92.5 (2060ec1f9f, 2020-04-08)" + sodipodi:docname="single-display-mpo-multi-video.svg"> + <defs + id="defs2"> + <marker + inkscape:stockid="TriangleOutL" + orient="auto" + refY="0" + refX="0" + id="TriangleOutL" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1133" + d="M 5.77,0 -2.88,5 V -5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="scale(0.8)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow1Send" + orient="auto" + refY="0" + refX="0" + id="Arrow1Send" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1006" + d="M 0,0 5,-5 -12.5,0 5,5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="matrix(-0.2,0,0,-0.2,-1.2,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="TriangleOutL" + orient="auto" + refY="0" + refX="0" + id="TriangleOutL-6" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1133-0" + d="M 5.77,0 -2.88,5 V -5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="scale(0.8)" /> + </marker> + </defs> + <sodipodi:namedview + id="base" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageopacity="0.0" + inkscape:pageshadow="2" + inkscape:zoom="1.979899" + inkscape:cx="255.95284" + inkscape:cy="222.25473" + inkscape:document-units="mm" + inkscape:current-layer="layer1" + showgrid="false" + inkscape:window-width="1514" + inkscape:window-height="1376" + inkscape:window-x="1046" + inkscape:window-y="27" + inkscape:window-maximized="0" + fit-margin-top="0" + fit-margin-left="0" + fit-margin-right="0" + fit-margin-bottom="0" /> + <metadata + id="metadata5"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title></dc:title> + </cc:Work> + </rdf:RDF> + </metadata> + <g + inkscape:label="Layer 1" + inkscape:groupmode="layer" + id="layer1" + transform="translate(26.189925,5.2546503)"> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:0.82813352px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.06901112" + x="-2.2053311" + y="32.839729" + id="text844"><tspan + sodipodi:role="line" + x="-2.2053313" + y="32.839729" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan846">Video Buffer (YUV)</tspan></text> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:0.82813352px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.06901112" + x="30.867918" + y="87.638779" + id="text844-2"><tspan + sodipodi:role="line" + x="30.867918" + y="87.638779" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan846-0">CRTC Output</tspan></text> + <rect + style="fill:none;fill-opacity:1;stroke:#000000;stroke-width:0.53249496;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:1.59748484, 0.53249495;stroke-dashoffset:0" + id="rect969" + width="111.63046" + height="44.238331" + x="-25.923677" + y="-4.9884028" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:0.82813352px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.06901112" + x="48.037342" + y="45.781586" + id="text844-2-9"><tspan + sodipodi:role="line" + x="48.037342" + y="45.781586" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan2868">Hardware Composition</tspan></text> + <path + style="fill:none;stroke:#000000;stroke-width:0.48997903;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#TriangleOutL)" + d="m 32.66992,40.326865 v 9.760144" + id="path989" + inkscape:connector-curvature="0" /> + <g + id="g4447" + style="stroke:#000000"> + <rect + ry="0" + y="0.23764905" + x="-23.784248" + height="29.48851" + width="48.988979" + id="rect836" + style="fill:#000000;fill-opacity:1;stroke:#000000;stroke-width:0.62916809;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + ry="0" + y="3.8184125" + x="-20.589451" + height="6.9794898" + width="11.594959" + id="rect836-2-6" + style="fill:#008000;fill-opacity:1;stroke:#000000;stroke-width:0.14891468;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + ry="0" + y="3.8184123" + x="-5.6613555" + height="6.9794903" + width="11.594959" + id="rect836-2-6-1" + style="fill:#008000;fill-opacity:1;stroke:#000000;stroke-width:0.14891469;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + ry="0" + y="3.8184121" + x="10.374816" + height="6.9794908" + width="11.594959" + id="rect836-2-6-1-8" + style="fill:#008000;fill-opacity:1;stroke:#000000;stroke-width:0.14891469;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + ry="0" + y="18.386644" + x="-20.341679" + height="6.9794903" + width="11.594959" + id="rect836-2-6-7" + style="fill:#008000;fill-opacity:1;stroke:#000000;stroke-width:0.14891469;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + ry="0" + y="18.386644" + x="-5.4135842" + height="6.9794908" + width="11.594959" + id="rect836-2-6-1-9" + style="fill:#008000;fill-opacity:1;stroke:#000000;stroke-width:0.14891469;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + ry="0" + y="18.386644" + x="10.622585" + height="6.9794908" + width="11.594959" + id="rect836-2-6-1-8-2" + style="fill:#008000;fill-opacity:1;stroke:#000000;stroke-width:0.14891469;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + </g> + <rect + style="fill:#808080;fill-opacity:1;stroke:#808080;stroke-width:0.62916809;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect836-2" + width="48.988979" + height="29.48851" + x="31.367332" + y="0.45039755" + ry="0" /> + <rect + style="fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.14891468;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect836-2-6-3" + width="11.594959" + height="6.9794898" + x="34.56213" + y="4.0311608" + ry="0" /> + <rect + style="fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.14891469;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect836-2-6-1-7" + width="11.594959" + height="6.9794903" + x="49.490223" + y="4.0311608" + ry="0" /> + <rect + style="fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.14891469;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect836-2-6-1-8-5" + width="11.594959" + height="6.9794908" + x="65.526398" + y="4.0311604" + ry="0" /> + <rect + style="fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.14891469;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect836-2-6-7-9" + width="11.594959" + height="6.9794903" + x="34.809902" + y="18.599392" + ry="0" /> + <rect + style="fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.14891469;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect836-2-6-1-9-2" + width="11.594959" + height="6.9794908" + x="49.737995" + y="18.599392" + ry="0" /> + <rect + style="fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.14891469;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect836-2-6-1-8-2-2" + width="11.594959" + height="6.9794908" + x="65.774162" + y="18.599392" + ry="0" /> + <g + id="g4562" + transform="translate(0,11.22532)"> + <rect + ry="0" + y="43.21352" + x="5.9767256" + height="29.48851" + width="48.988979" + id="rect836-97" + style="fill:#808080;fill-opacity:1;stroke:#808080;stroke-width:0.62916809;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + ry="0" + y="46.794285" + x="9.1715231" + height="6.9794898" + width="11.594959" + id="rect836-2-6-36" + style="fill:#008000;fill-opacity:1;stroke:#000000;stroke-width:0.14891468;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + ry="0" + y="46.794285" + x="24.099619" + height="6.9794903" + width="11.594959" + id="rect836-2-6-1-1" + style="fill:#008000;fill-opacity:1;stroke:#000000;stroke-width:0.14891469;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + ry="0" + y="46.794285" + x="40.135792" + height="6.9794908" + width="11.594959" + id="rect836-2-6-1-8-29" + style="fill:#008000;fill-opacity:1;stroke:#000000;stroke-width:0.14891469;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + ry="0" + y="61.362514" + x="9.4192953" + height="6.9794903" + width="11.594959" + id="rect836-2-6-7-3" + style="fill:#008000;fill-opacity:1;stroke:#000000;stroke-width:0.14891469;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + ry="0" + y="61.362514" + x="24.347389" + height="6.9794908" + width="11.594959" + id="rect836-2-6-1-9-1" + style="fill:#008000;fill-opacity:1;stroke:#000000;stroke-width:0.14891469;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + <rect + ry="0" + y="61.362514" + x="40.38356" + height="6.9794908" + width="11.594959" + id="rect836-2-6-1-8-2-9" + style="fill:#008000;fill-opacity:1;stroke:#000000;stroke-width:0.14891469;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + </g> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:0.82813358px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.06901112" + x="57.012939" + y="33.603645" + id="text844-4"><tspan + sodipodi:role="line" + x="57.012939" + y="33.603645" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan846-7">Desktop Buffer (ARGB)</tspan></text> + </g> +</svg> diff --git a/Documentation/gpu/amdgpu/display/single-display-mpo.svg b/Documentation/gpu/amdgpu/display/single-display-mpo.svg new file mode 100644 index 000000000000..fb53b0920c87 --- /dev/null +++ b/Documentation/gpu/amdgpu/display/single-display-mpo.svg @@ -0,0 +1,266 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="148.71147mm" + height="38.356358mm" + viewBox="0 0 148.71148 38.356358" + version="1.1" + id="svg8" + inkscape:version="0.92.5 (2060ec1f9f, 2020-04-08)" + sodipodi:docname="single-display-mpo.svg"> + <defs + id="defs2"> + <marker + inkscape:stockid="TriangleOutL" + orient="auto" + refY="0" + refX="0" + id="TriangleOutL" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1133" + d="M 5.77,0 -2.88,5 V -5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="scale(0.8)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow1Send" + orient="auto" + refY="0" + refX="0" + id="Arrow1Send" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path1006" + d="M 0,0 5,-5 -12.5,0 5,5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="matrix(-0.2,0,0,-0.2,-1.2,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="TriangleOutL" + orient="auto" + refY="0" + refX="0" + id="TriangleOutL-6" + style="overflow:visible" + inkscape:isstock="true"> + <path + inkscape:connector-curvature="0" + id="path1133-0" + d="M 5.77,0 -2.88,5 V -5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="scale(0.8)" /> + </marker> + </defs> + <sodipodi:namedview + id="base" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageopacity="0.0" + inkscape:pageshadow="2" + inkscape:zoom="1.979899" + inkscape:cx="266.07058" + inkscape:cy="81.254796" + inkscape:document-units="mm" + inkscape:current-layer="layer1" + showgrid="false" + inkscape:window-width="1514" + inkscape:window-height="1376" + inkscape:window-x="1046" + inkscape:window-y="27" + inkscape:window-maximized="0" + fit-margin-top="0" + fit-margin-left="0" + fit-margin-right="0" + fit-margin-bottom="0" /> + <metadata + id="metadata5"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title></dc:title> + </cc:Work> + </rdf:RDF> + </metadata> + <g + inkscape:label="Layer 1" + inkscape:groupmode="layer" + id="layer1" + transform="translate(26.323559,-14.790568)"> + <rect + style="fill:#999999;fill-opacity:1;stroke:#999999;stroke-width:0.62916809;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect836" + width="48.988979" + height="29.48851" + x="4.9472256" + y="17.075632" + ry="0" /> + <g + id="g905" + transform="matrix(0.26082945,0,0,0.26082945,-26.950235,-0.99631462)"> + <rect + y="67.568451" + x="12.473214" + height="60.854164" + width="102.43154" + id="rect834" + style="fill:#008000;fill-opacity:1;stroke:none;stroke-width:2;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + <path + inkscape:transform-center-y="-3.581986e-06" + inkscape:transform-center-x="-3.3106064" + d="m 73.620805,97.995537 -9.931819,5.734143 -9.931819,5.73413 0,-11.468274 0,-11.468276 9.931819,5.734139 z" + inkscape:randomized="0" + inkscape:rounded="0" + inkscape:flatsided="false" + sodipodi:arg2="1.0471976" + sodipodi:arg1="0" + sodipodi:r2="6.6212125" + sodipodi:r1="13.242425" + sodipodi:cy="97.995537" + sodipodi:cx="60.37838" + sodipodi:sides="3" + id="path840" + style="fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:1.22854495;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + sodipodi:type="star" /> + </g> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:0.82813352px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.06901112" + x="-10.357052" + y="34.176075" + id="text844"><tspan + sodipodi:role="line" + id="tspan842" + x="-10.357052" + y="34.176075" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112">Video Buffer (YUV)</tspan><tspan + sodipodi:role="line" + x="-10.357052" + y="36.706482" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan846">DRM PRIMARY PLANE</tspan></text> + <rect + style="fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.5216589;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect834-3" + width="26.717165" + height="15.872559" + x="16.083126" + y="23.883608" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:0.82813352px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.06901112" + x="28.437061" + y="49.158085" + id="text844-6"><tspan + sodipodi:role="line" + x="28.437061" + y="49.158085" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan846-5">Desktop Buffer (ARGB)</tspan><tspan + sodipodi:role="line" + x="28.437061" + y="51.688492" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan886">DRM OVERLAY PLANE</tspan></text> + <g + id="g2874" + transform="matrix(1.0858687,0,0,1.0858687,-4.5597909,-2.06277)"> + <rect + ry="0" + y="17.624969" + x="71.504173" + height="27.156607" + width="45.115009" + id="rect836-9" + style="fill:#999999;fill-opacity:1;stroke:#999999;stroke-width:0.57941455;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" /> + <g + id="g905-5" + transform="matrix(0.24020349,0,0,0.24020349,78.763353,7.664402)"> + <rect + style="fill:#008000;fill-opacity:1;stroke:none;stroke-width:2;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="rect834-6" + width="102.43154" + height="60.854164" + x="12.473214" + y="67.568451" /> + <path + sodipodi:type="star" + style="fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:1.22854495;stroke-linecap:round;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0" + id="path840-2" + sodipodi:sides="3" + sodipodi:cx="60.37838" + sodipodi:cy="97.995537" + sodipodi:r1="13.242425" + sodipodi:r2="6.6212125" + sodipodi:arg1="0" + sodipodi:arg2="1.0471976" + inkscape:flatsided="false" + inkscape:rounded="0" + inkscape:randomized="0" + d="m 73.620805,97.995537 -9.931819,5.734143 -9.931819,5.73413 0,-11.468274 0,-11.468276 9.931819,5.734139 z" + inkscape:transform-center-x="-3.3106064" + inkscape:transform-center-y="-3.581986e-06" /> + </g> + </g> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:0.82813352px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.06901112" + x="97.551666" + y="50.221046" + id="text844-2"><tspan + sodipodi:role="line" + x="97.551666" + y="50.221046" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan846-0">CRTC Output</tspan></text> + <rect + style="fill:none;fill-opacity:1;stroke:#000000;stroke-width:0.42211887;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:1.26635657, 0.42211886;stroke-dashoffset:0" + id="rect969" + width="81.806648" + height="37.934238" + x="-26.112499" + y="15.001627" /> + <text + xml:space="preserve" + style="font-style:normal;font-weight:normal;font-size:0.82813352px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.06901112" + x="64.474419" + y="31.883568" + id="text844-2-9"><tspan + sodipodi:role="line" + x="64.474419" + y="31.883568" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan846-0-3">Hardware</tspan><tspan + sodipodi:role="line" + x="64.474419" + y="34.413975" + style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:2.02432632px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.06901112" + id="tspan2868">Composition</tspan></text> + <path + style="fill:none;stroke:#000000;stroke-width:0.48997903;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#TriangleOutL)" + d="m 57.401149,24.81643 h 9.760144" + id="path989" + inkscape:connector-curvature="0" /> + <path + style="fill:none;stroke:#000000;stroke-width:0.48997903;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#TriangleOutL-6)" + d="m 57.401149,41.794278 h 9.760144" + id="path989-6" + inkscape:connector-curvature="0" /> + </g> +</svg> diff --git a/Documentation/gpu/amdgpu/driver-misc.rst b/Documentation/gpu/amdgpu/driver-misc.rst index e3d6b2fa2493..1800543d45f7 100644 --- a/Documentation/gpu/amdgpu/driver-misc.rst +++ b/Documentation/gpu/amdgpu/driver-misc.rst @@ -32,6 +32,23 @@ unique_id .. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c :doc: unique_id +Accelerated Processing Units (APU) Info +--------------------------------------- + +.. csv-table:: + :header-rows: 1 + :widths: 3, 2, 2, 1, 1, 1 + :file: ./apu-asic-info-table.csv + +Discrete GPU Info +----------------- + +.. csv-table:: + :header-rows: 1 + :widths: 3, 2, 2, 1, 1, 1 + :file: ./dgpu-asic-info-table.csv + + GPU Memory Usage Information ============================ diff --git a/Documentation/gpu/amdgpu/thermal.rst b/Documentation/gpu/amdgpu/thermal.rst index 997231b6adcf..5e27e4eb3959 100644 --- a/Documentation/gpu/amdgpu/thermal.rst +++ b/Documentation/gpu/amdgpu/thermal.rst @@ -72,7 +72,8 @@ card's RLC (RunList Controller) firmware powers off the gfx engine dynamically when there is no workload on gfx or compute pipes. GFXOFF is on by default on supported GPUs. -Userspace can interact with GFXOFF through a debugfs interface: +Userspace can interact with GFXOFF through a debugfs interface (all values in +`uint32_t`, unless otherwise noted): ``amdgpu_gfxoff`` ----------------- @@ -104,3 +105,18 @@ Read it to check current GFXOFF's status of a GPU:: If GFXOFF is enabled, the value will be transitioning around [0, 3], always getting into 0 when possible. When it's disabled, it's always at 2. Returns ``-EINVAL`` if it's not supported. + +``amdgpu_gfxoff_count`` +----------------------- + +Read it to get the total GFXOFF entry count at the time of query since system +power-up. The value is an `uint64_t` type, however, due to firmware limitations, +it can currently overflow as an `uint32_t`. *Only supported in vangogh* + +``amdgpu_gfxoff_residency`` +--------------------------- + +Write 1 to amdgpu_gfxoff_residency to start logging, and 0 to stop. Read it to +get average GFXOFF residency % multiplied by 100 during the last logging +interval. E.g. a value of 7854 means 78.54% of the time in the last logging +interval the GPU was in GFXOFF mode. *Only supported in vangogh* diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst index 2d473bc64c9f..dbc85fd7a971 100644 --- a/Documentation/gpu/drm-kms-helpers.rst +++ b/Documentation/gpu/drm-kms-helpers.rst @@ -122,13 +122,13 @@ format Helper Functions Reference .. kernel-doc:: drivers/gpu/drm/drm_format_helper.c :export: -Framebuffer CMA Helper Functions Reference +Framebuffer DMA Helper Functions Reference ========================================== -.. kernel-doc:: drivers/gpu/drm/drm_fb_cma_helper.c - :doc: framebuffer cma helper functions +.. kernel-doc:: drivers/gpu/drm/drm_fb_dma_helper.c + :doc: framebuffer dma helper functions -.. kernel-doc:: drivers/gpu/drm/drm_fb_cma_helper.c +.. kernel-doc:: drivers/gpu/drm/drm_fb_dma_helper.c :export: Framebuffer GEM Helper Reference diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index 6f9c064fd323..b4377a545425 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -532,6 +532,8 @@ Standard Plane Properties .. kernel-doc:: drivers/gpu/drm/drm_plane.c :doc: standard plane properties +.. _plane_composition_properties: + Plane Composition Properties ---------------------------- diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst index f32ccce5722d..a79fd3549ff8 100644 --- a/Documentation/gpu/drm-mm.rst +++ b/Documentation/gpu/drm-mm.rst @@ -300,12 +300,12 @@ Drivers that want to map the GEM object upfront instead of handling page faults can implement their own mmap file operation handler. For platforms without MMU the GEM core provides a helper method -drm_gem_cma_get_unmapped_area(). The mmap() routines will call this to get a +drm_gem_dma_get_unmapped_area(). The mmap() routines will call this to get a proposed address for the mapping. -To use drm_gem_cma_get_unmapped_area(), drivers must fill the struct +To use drm_gem_dma_get_unmapped_area(), drivers must fill the struct :c:type:`struct file_operations <file_operations>` get_unmapped_area field with -a pointer on drm_gem_cma_get_unmapped_area(). +a pointer on drm_gem_dma_get_unmapped_area(). More detailed information about get_unmapped_area can be found in Documentation/admin-guide/mm/nommu-mmap.rst @@ -355,16 +355,16 @@ GEM Function Reference .. kernel-doc:: drivers/gpu/drm/drm_gem.c :export: -GEM CMA Helper Functions Reference +GEM DMA Helper Functions Reference ---------------------------------- -.. kernel-doc:: drivers/gpu/drm/drm_gem_cma_helper.c - :doc: cma helpers +.. kernel-doc:: drivers/gpu/drm/drm_gem_dma_helper.c + :doc: dma helpers -.. kernel-doc:: include/drm/drm_gem_cma_helper.h +.. kernel-doc:: include/drm/drm_gem_dma_helper.h :internal: -.. kernel-doc:: drivers/gpu/drm/drm_gem_cma_helper.c +.. kernel-doc:: drivers/gpu/drm/drm_gem_dma_helper.c :export: GEM SHMEM Helper Function Reference diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 513b20ccef1e..393d218e4a0c 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -322,18 +322,6 @@ Contact: Daniel Vetter, Noralf Tronnes Level: Advanced -idr_init_base() ---------------- - -DRM core&drivers uses a lot of idr (integer lookup directories) for mapping -userspace IDs to internal objects, and in most places ID=0 means NULL and hence -is never used. Switching to idr_init_base() for these would make the idr more -efficient. - -Contact: Daniel Vetter - -Level: Starter - struct drm_gem_object_funcs --------------------------- @@ -343,19 +331,6 @@ converted, except for struct drm_driver.gem_prime_mmap. Level: Intermediate -Rename CMA helpers to DMA helpers ---------------------------------- - -CMA (standing for contiguous memory allocator) is really a bit an accident of -what these were used for first, a much better name would be DMA helpers. In the -text these should even be called coherent DMA memory helpers (so maybe CDM, but -no one knows what that means) since underneath they just use dma_alloc_coherent. - -Contact: Laurent Pinchart, Daniel Vetter - -Level: Intermediate (mostly because it is a huge tasks without good partial -milestones, not technically itself that challenging) - connector register/unregister fixes ----------------------------------- @@ -617,17 +592,6 @@ Contact: Javier Martinez Canillas <javierm@redhat.com> Level: Intermediate -Convert Kernel Selftests (kselftest) to KUnit tests when appropriate --------------------------------------------------------------------- - -Many of the `Kselftest <https://www.kernel.org/doc/html/latest/dev-tools/kselftest.html>`_ -tests in DRM could be converted to Kunit tests instead, since that framework -is more suitable for unit testing. - -Contact: Javier Martinez Canillas <javierm@redhat.com> - -Level: Starter - Enable trinity for DRM ---------------------- @@ -715,6 +679,74 @@ Contact: Sam Ravnborg Level: Advanced +Brightness handling on devices with multiple internal panels +============================================================ + +On x86/ACPI devices there can be multiple backlight firmware interfaces: +(ACPI) video, vendor specific and others. As well as direct/native (PWM) +register programming by the KMS driver. + +To deal with this backlight drivers used on x86/ACPI call +acpi_video_get_backlight_type() which has heuristics (+quirks) to select +which backlight interface to use; and backlight drivers which do not match +the returned type will not register themselves, so that only one backlight +device gets registered (in a single GPU setup, see below). + +At the moment this more or less assumes that there will only +be 1 (internal) panel on a system. + +On systems with 2 panels this may be a problem, depending on +what interface acpi_video_get_backlight_type() selects: + +1. native: in this case the KMS driver is expected to know which backlight + device belongs to which output so everything should just work. +2. video: this does support controlling multiple backlights, but some work + will need to be done to get the output <-> backlight device mapping + +The above assumes both panels will require the same backlight interface type. +Things will break on systems with multiple panels where the 2 panels need +a different type of control. E.g. one panel needs ACPI video backlight control, +where as the other is using native backlight control. Currently in this case +only one of the 2 required backlight devices will get registered, based on +the acpi_video_get_backlight_type() return value. + +If this (theoretical) case ever shows up, then supporting this will need some +work. A possible solution here would be to pass a device and connector-name +to acpi_video_get_backlight_type() so that it can deal with this. + +Note in a way we already have a case where userspace sees 2 panels, +in dual GPU laptop setups with a mux. On those systems we may see +either 2 native backlight devices; or 2 native backlight devices. + +Userspace already has code to deal with this by detecting if the related +panel is active (iow which way the mux between the GPU and the panels +points) and then uses that backlight device. Userspace here very much +assumes a single panel though. It picks only 1 of the 2 backlight devices +and then only uses that one. + +Note that all userspace code (that I know off) is currently hardcoded +to assume a single panel. + +Before the recent changes to not register multiple (e.g. video + native) +/sys/class/backlight devices for a single panel (on a single GPU laptop), +userspace would see multiple backlight devices all controlling the same +backlight. + +To deal with this userspace had to always picks one preferred device under +/sys/class/backlight and will ignore the others. So to support brightness +control on multiple panels userspace will need to be updated too. + +There are plans to allow brightness control through the KMS API by adding +a "display brightness" property to drm_connector objects for panels. This +solves a number of issues with the /sys/class/backlight API, including not +being able to map a sysfs backlight device to a specific connector. Any +userspace changes to add support for brightness control on devices with +multiple panels really should build on top of this new KMS property. + +Contact: Hans de Goede + +Level: Advanced + Outside DRM =========== diff --git a/Documentation/gpu/vkms.rst b/Documentation/gpu/vkms.rst index 973e2d43108b..49db221c0f52 100644 --- a/Documentation/gpu/vkms.rst +++ b/Documentation/gpu/vkms.rst @@ -118,15 +118,10 @@ Add Plane Features There's lots of plane features we could add support for: -- Clearing primary plane: clear primary plane before plane composition (at the - start) for correctness of pixel blend ops. It also guarantees alpha channel - is cleared in the target buffer for stable crc. [Good to get started] - - ARGB format on primary plane: blend the primary plane into background with translucent alpha. -- Support when the primary plane isn't exactly matching the output size: blend - the primary plane into the black background. +- Add background color KMS property[Good to get started]. - Full alpha blending on all planes. diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst index 33649a1e3a05..e238533b5fe0 100644 --- a/Documentation/hwmon/aquacomputer_d5next.rst +++ b/Documentation/hwmon/aquacomputer_d5next.rst @@ -10,6 +10,7 @@ Supported devices: * Aquacomputer Farbwerk 360 RGB controller * Aquacomputer Octo fan controller * Aquacomputer Quadro fan controller +* Aquacomputer High Flow Next sensor Author: Aleksa Savic @@ -20,10 +21,11 @@ This driver exposes hardware sensors of listed Aquacomputer devices, which communicate through proprietary USB HID protocols. For the D5 Next pump, available sensors are pump and fan speed, power, voltage -and current, as well as coolant temperature. Also available through debugfs are -the serial number, firmware version and power-on count. Attaching a fan to it is -optional and allows it to be controlled using temperature curves directly from the -pump. If it's not connected, the fan-related sensors will report zeroes. +and current, as well as coolant temperature and eight virtual temp sensors. Also +available through debugfs are the serial number, firmware version and power-on +count. Attaching a fan to it is optional and allows it to be controlled using +temperature curves directly from the pump. If it's not connected, the fan-related +sensors will report zeroes. The pump can be configured either through software or via its physical interface. Configuring the pump through this driver is not implemented, as it @@ -31,14 +33,23 @@ seems to require sending it a complete configuration. That includes addressable RGB LEDs, for which there is no standard sysfs interface. Thus, that task is better suited for userspace tools. -The Octo exposes four temperature sensors and eight PWM controllable fans, along -with their speed (in RPM), power, voltage and current. +The Octo exposes four physical and sixteen virtual temperature sensors, as well as +eight PWM controllable fans, along with their speed (in RPM), power, voltage and +current. -The Quadro exposes four temperature sensors, a flow sensor and four PWM controllable -fans, along with their speed (in RPM), power, voltage and current. +The Quadro exposes four physical and sixteen virtual temperature sensors, a flow +sensor and four PWM controllable fans, along with their speed (in RPM), power, +voltage and current. -The Farbwerk and Farbwerk 360 expose four temperature sensors. Depending on the device, -not all sysfs and debugfs entries will be available. +The Farbwerk and Farbwerk 360 expose four temperature sensors. Additionally, +sixteen virtual temperature sensors of the Farbwerk 360 are exposed. + +The High Flow Next exposes +5V voltages, water quality, conductivity and flow readings. +A temperature sensor can be connected to it, in which case it provides its reading +and an estimation of the dissipated/absorbed power in the liquid cooling loop. + +Depending on the device, not all sysfs and debugfs entries will be available. +Writing to virtual temperature sensors is not currently supported. Usage notes ----------- @@ -49,14 +60,14 @@ the kernel and supports hotswapping. Sysfs entries ------------- -================ ============================================== -temp[1-4]_input Temperature sensors (in millidegrees Celsius) +================ ============================================================== +temp[1-20]_input Physical/virtual temperature sensors (in millidegrees Celsius) fan[1-8]_input Pump/fan speed (in RPM) / Flow speed (in dL/h) power[1-8]_input Pump/fan power (in micro Watts) in[0-7]_input Pump/fan voltage (in milli Volts) curr[1-8]_input Pump/fan current (in milli Amperes) pwm[1-8] Fan PWM (0 - 255) -================ ============================================== +================ ============================================================== Debugfs entries --------------- diff --git a/Documentation/hwmon/asus_wmi_ec_sensors.rst b/Documentation/hwmon/asus_wmi_ec_sensors.rst deleted file mode 100644 index 1b287f229e86..000000000000 --- a/Documentation/hwmon/asus_wmi_ec_sensors.rst +++ /dev/null @@ -1,38 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0-or-later - -Kernel driver asus_wmi_ec_sensors -================================= - -Supported boards: - * PRIME X570-PRO, - * Pro WS X570-ACE, - * ROG CROSSHAIR VIII DARK HERO, - * ROG CROSSHAIR VIII FORMULA, - * ROG CROSSHAIR VIII HERO, - * ROG STRIX B550-E GAMING, - * ROG STRIX B550-I GAMING, - * ROG STRIX X570-E GAMING. - -Authors: - - Eugene Shalygin <eugene.shalygin@gmail.com> - -Description: ------------- -ASUS mainboards publish hardware monitoring information via Super I/O -chip and the ACPI embedded controller (EC) registers. Some of the sensors -are only available via the EC. - -ASUS WMI interface provides a method (BREC) to read data from EC registers, -which is utilized by this driver to publish those sensor readings to the -HWMON system. The driver is aware of and reads the following sensors: - -1. Chipset (PCH) temperature -2. CPU package temperature -3. Motherboard temperature -4. Readings from the T_Sensor header -5. VRM temperature -6. CPU_Opt fan RPM -7. Chipset fan RPM -8. Readings from the "Water flow meter" header (RPM) -9. Readings from the "Water In" and "Water Out" temperature headers -10. CPU current diff --git a/Documentation/hwmon/corsair-psu.rst b/Documentation/hwmon/corsair-psu.rst index e8378e7a1d8c..3c1b164eb3c0 100644 --- a/Documentation/hwmon/corsair-psu.rst +++ b/Documentation/hwmon/corsair-psu.rst @@ -15,7 +15,7 @@ Supported devices: Corsair HX850i - Corsair HX1000i + Corsair HX1000i (revision 1 and 2) Corsair HX1200i @@ -86,8 +86,9 @@ Debugfs entries --------------- ======================= ======================================================== -uptime Current uptime of the psu +ocpmode Single or multi rail mode of the PCIe power connectors +product Product name of the psu +uptime Session uptime of the psu uptime_total Total uptime of the psu vendor Vendor name of the psu -product Product name of the psu ======================= ======================================================== diff --git a/Documentation/hwmon/emc2305.rst b/Documentation/hwmon/emc2305.rst new file mode 100644 index 000000000000..2403dbaf2728 --- /dev/null +++ b/Documentation/hwmon/emc2305.rst @@ -0,0 +1,37 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver emc2305 +===================== + +Supported chips: + Microchip EMC2305, EMC2303, EMC2302, EMC2301 + + Addresses scanned: I2C 0x27, 0x2c, 0x2d, 0x2e, 0x2f, 0x4c, 0x4d + Prefixes: 'emc2305' + + Datasheet: Publicly available at the Microchip website : + https://www.microchip.com/en-us/product/EMC2305 + +Description: +------------ +This driver implements support for Microchip EMC2301/2/3/5 RPM-based PWM Fan Controller. +The EMC2305 Fan Controller supports up to 5 independently controlled PWM fan drives. +Fan rotation speeds are reported in RPM. +The driver supports the RPM-based PWM control to keep a fan at the desired speed. +The driver provides the possibility to have one common PWM interface for all FANs +or up to the maximum available or configured independent PWMs. + +The driver provides the following sysfs interfaces in hwmon subsystem: + +================= == =================================================== +fan[1-5]_fault RO files for tachometers TACH1-TACH5 fault indication +fan[1-5]_input RO files for tachometers TACH1-TACH5 input (in RPM) +pwm[1-5] RW file for fan[1-5] target duty cycle (0..255) +================= == =================================================== + +sysfs interfaces in thermal subsystem: + +================= == ======================================================================== +cur_state RW file for the current cooling state of the cooling device (0..max_state) +max_state RO file for the maximum cooling state of the cooling device +================= == ======================================================================== diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index f7113b0f8b2a..c1d11cf13eef 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -44,7 +44,6 @@ Hardware Monitoring Kernel Drivers asc7621 aspeed-pwm-tacho asus_ec_sensors - asus_wmi_ec_sensors asus_wmi_sensors bcm54140 bel-pfe @@ -63,6 +62,7 @@ Hardware Monitoring Kernel Drivers ds620 emc1403 emc2103 + emc2305 emc6w201 f71805f f71882fg @@ -133,6 +133,7 @@ Hardware Monitoring Kernel Drivers max20751 max31722 max31730 + max31760 max31785 max31790 max34440 @@ -205,6 +206,7 @@ Hardware Monitoring Kernel Drivers tps23861 tps40422 tps53679 + tps546d24 twl4030-madc-hwmon ucd9000 ucd9200 diff --git a/Documentation/hwmon/max31760.rst b/Documentation/hwmon/max31760.rst new file mode 100644 index 000000000000..b1b55fb843c1 --- /dev/null +++ b/Documentation/hwmon/max31760.rst @@ -0,0 +1,77 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver max31760 +====================== + +Supported chips: + * Analog Devices MAX31760 + + Prefix: 'max31760' + + Addresses scanned: none + + Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31760.pdf + + +Author: Ibrahim Tilki <Ibrahim.Tilki@analog.com> + +Description +----------- + +The MAX31760 integrates temperature sensing along with precision PWM fan +control. It accurately measures its local die temperature and the remote +temperature of a discrete diode-connected transistor, such as a 2N3906, +or a thermal diode commonly found on CPUs, graphics processor units (GPUs), +and other ASICs. Multiple temperature thresholds, such as local +high/overtemperature (OT) and remote high/overtemperature, can be set by an +I2C-compatible interface. Fan speed is controlled based on the temperature +reading as an index to a 48-byte lookup table (LUT) containing +user-programmed PWM values. The flexible LUT-based architecture enables +the user to program a smooth nonlinear fan speed vs. temperature transfer +function to minimize acoustic fan noise. Two tachometer inputs allow +measuring the speeds of two fans independently. When the local or remote +OT threshold is exceeded, the SHDN pin is asserted low and can be used to +shut down the system. A dedicated ALERT pin reports that either a local or +remote high-temperature threshold has been exceeded. + +Temperature measurement range: from -55°C to 125°C + +Temperature Resolution: 11 Bits, ±0.125°C + +Please refer how to instantiate this driver: Documentation/i2c/instantiating-devices.rst + +Lookup table for auto fan control +--------------------------------- + +========= ================================= +LUT Index Name +========= ================================= +1 PWM value for T < +18°C +2 PWM value for +18°C ≤ T < +20°C +3 PWM value for +20°C ≤ T < +22°C +... ... +47 PWM value for +108°C ≤ T < +110°C +48 PWM value for T ≥ +110°C +========= ================================= + +Sysfs entries +------------- + +=============================== ================================================================================= +fan[1-2]_input Fan speed (in RPM) +fan[1-2]_enable Enable fan readings and fan fault alarms +fan[1-2]_fault Fan fault status +temp[1-2]_label "Remote" and "Local" temperature channel labels +temp[1-2]_input Temperature sensor readings (in millidegrees Celsius) +temp1_fault Remote temperature sensor fault status +temp[1-2]_max Temperature max value. Asserts "ALERT" pin when exceeded +temp[1-2]_max_alarm Temperature max alarm status +temp[1-2]_crit Temperature critical value. Asserts "SHDN" pin when exceeded +temp[1-2]_crit_alarm Temperature critical alarm status +pwm1 PWM value for direct fan control +pwm1_enable 1: direct fan control, 2: temperature based auto fan control +pwm1_freq PWM frequency in hertz +pwm1_auto_channels_temp Temperature source for auto fan control. 1: temp1, 2: temp2, 3: max(temp1, temp2) +pwm1_auto_point[1-48]_pwm PWM value for LUT point +pwm1_auto_point_temp_hyst Temperature hysteresis for auto fan control. Can be either 2000mC or 4000mC +=============================== ================================================================================= diff --git a/Documentation/hwmon/max31790.rst b/Documentation/hwmon/max31790.rst index 7b097c3b9b90..33c5c7330efc 100644 --- a/Documentation/hwmon/max31790.rst +++ b/Documentation/hwmon/max31790.rst @@ -38,6 +38,7 @@ Sysfs entries fan[1-12]_input RO fan tachometer speed in RPM fan[1-12]_fault RO fan experienced fault fan[1-6]_target RW desired fan speed in RPM +fan[1-6]_enable RW enable or disable the tachometer input pwm[1-6]_enable RW regulator mode, 0=disabled (duty cycle=0%), 1=manual mode, 2=rpm mode pwm[1-6] RW read: current pwm duty cycle, write: target pwm duty cycle (0-255) diff --git a/Documentation/hwmon/pwm-fan.rst b/Documentation/hwmon/pwm-fan.rst index 82fe96742fee..f77998b204ef 100644 --- a/Documentation/hwmon/pwm-fan.rst +++ b/Documentation/hwmon/pwm-fan.rst @@ -18,3 +18,15 @@ the hwmon's sysfs interface. The fan rotation speed returned via the optional 'fan1_input' is extrapolated from the sampled interrupts from the tachometer signal within 1 second. + +The driver provides the following sensor accesses in sysfs: + +=============== ======= ======================================================= +fan1_input ro fan tachometer speed in RPM +pwm1_enable rw keep enable mode, defines behaviour when pwm1=0 + 0 -> disable pwm and regulator + 1 -> enable pwm; if pwm==0, disable pwm, keep regulator enabled + 2 -> enable pwm; if pwm==0, keep pwm and regulator enabled + 3 -> enable pwm; if pwm==0, disable pwm and regulator +pwm1 rw relative speed (0-255), 255=max. speed. +=============== ======= ======================================================= diff --git a/Documentation/hwmon/tps546d24.rst b/Documentation/hwmon/tps546d24.rst new file mode 100644 index 000000000000..97adb8a30fc0 --- /dev/null +++ b/Documentation/hwmon/tps546d24.rst @@ -0,0 +1,35 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +Kernel driver tps546d24 +======================= + +Supported chips: + + * TI TPS546D24 + + Prefix: 'tps546d24' + + Addresses scanned: - + + Datasheet: https://www.ti.com/lit/gpn/tps546d24 + +Author: Duke Du <dukedu83@gmail.com> + + +Description +----------- + +The TPS546D24A is a highly integrated, non-isolated DC/DC converter capable +of high frequency operation and 40-A current output from a 7-mm x 5-mm +package. + +Two, three, and four TPS546D24A devices can be interconnected +to provide up to 160 A on a single output. The device has an option to +overdrive the internal 5-V LDO with an external 5-V supply via the VDD5 +pin to improve efficiency and reduce power dissipation of the converter. + + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. diff --git a/Documentation/i2c/busses/i2c-piix4.rst b/Documentation/i2c/busses/i2c-piix4.rst index cc9000259223..07fe6f6f4b18 100644 --- a/Documentation/i2c/busses/i2c-piix4.rst +++ b/Documentation/i2c/busses/i2c-piix4.rst @@ -64,7 +64,7 @@ correct address for this module, you could get in big trouble (read: crashes, data corruption, etc.). Try this only as a last resort (try BIOS updates first, for example), and backup first! An even more dangerous option is 'force_addr=<IOPORT>'. This will not only enable the PIIX4 like -'force' foes, but it will also set a new base I/O port address. The SMBus +'force' does, but it will also set a new base I/O port address. The SMBus parts of the PIIX4 needs a range of 8 of these addresses to function correctly. If these addresses are already reserved by some other device, you will get into big trouble! DON'T USE THIS IF YOU ARE NOT VERY SURE @@ -86,15 +86,15 @@ If you own Force CPCI735 motherboard or other OSB4 based systems you may need to change the SMBus Interrupt Select register so the SMBus controller uses the SMI mode. -1) Use lspci command and locate the PCI device with the SMBus controller: +1) Use ``lspci`` command and locate the PCI device with the SMBus controller: 00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 4f) The line may vary for different chipsets. Please consult the driver source - for all possible PCI ids (and lspci -n to match them). Lets assume the + for all possible PCI ids (and ``lspci -n`` to match them). Let's assume the device is located at 00:0f.0. 2) Now you just need to change the value in 0xD2 register. Get it first with - command: lspci -xxx -s 00:0f.0 + command: ``lspci -xxx -s 00:0f.0`` If the value is 0x3 then you need to change it to 0x1: - setpci -s 00:0f.0 d2.b=1 + ``setpci -s 00:0f.0 d2.b=1`` Please note that you don't need to do that in all cases, just when the SMBus is not working properly. @@ -109,6 +109,3 @@ which can easily get corrupted due to a state machine bug. These are mostly Thinkpad laptops, but desktop systems may also be affected. We have no list of all affected systems, so the only safe solution was to prevent access to the SMBus on all IBM systems (detected using DMI data.) - -For additional information, read: -http://www.lm-sensors.org/browser/lm-sensors/trunk/README diff --git a/Documentation/i2c/dev-interface.rst b/Documentation/i2c/dev-interface.rst index 73ad34849f99..c277a8e1202b 100644 --- a/Documentation/i2c/dev-interface.rst +++ b/Documentation/i2c/dev-interface.rst @@ -148,7 +148,7 @@ You can do plain I2C transactions by using read(2) and write(2) calls. You do not need to pass the address byte; instead, set it through ioctl I2C_SLAVE before you try to access the device. -You can do SMBus level transactions (see documentation file smbus-protocol +You can do SMBus level transactions (see documentation file smbus-protocol.rst for details) through the following functions:: __s32 i2c_smbus_write_quick(int file, __u8 value); diff --git a/Documentation/i2c/i2c-topology.rst b/Documentation/i2c/i2c-topology.rst index 7cb53819778e..48fce0f7491b 100644 --- a/Documentation/i2c/i2c-topology.rst +++ b/Documentation/i2c/i2c-topology.rst @@ -5,6 +5,8 @@ I2C muxes and complex topologies There are a couple of reasons for building more complex I2C topologies than a straight-forward I2C bus with one adapter and one or more devices. +Some example use cases are: + 1. A mux may be needed on the bus to prevent address collisions. 2. The bus may be accessible from some external bus master, and arbitration @@ -14,10 +16,10 @@ than a straight-forward I2C bus with one adapter and one or more devices. from the I2C bus, at least most of the time, and sits behind a gate that has to be operated before the device can be accessed. -Etc -=== +Several types of hardware components such as I2C muxes, I2C gates and I2C +arbitrators allow to handle such needs. -These constructs are represented as I2C adapter trees by Linux, where +These components are represented as I2C adapter trees by Linux, where each adapter has a parent adapter (except the root adapter) and zero or more child adapters. The root adapter is the actual adapter that issues I2C transfers, and all adapters with a parent are part of an "i2c-mux" @@ -35,46 +37,7 @@ Locking ======= There are two variants of locking available to I2C muxes, they can be -mux-locked or parent-locked muxes. As is evident from below, it can be -useful to know if a mux is mux-locked or if it is parent-locked. The -following list was correct at the time of writing: - -In drivers/i2c/muxes/: - -====================== ============================================= -i2c-arb-gpio-challenge Parent-locked -i2c-mux-gpio Normally parent-locked, mux-locked iff - all involved gpio pins are controlled by the - same I2C root adapter that they mux. -i2c-mux-gpmux Normally parent-locked, mux-locked iff - specified in device-tree. -i2c-mux-ltc4306 Mux-locked -i2c-mux-mlxcpld Parent-locked -i2c-mux-pca9541 Parent-locked -i2c-mux-pca954x Parent-locked -i2c-mux-pinctrl Normally parent-locked, mux-locked iff - all involved pinctrl devices are controlled - by the same I2C root adapter that they mux. -i2c-mux-reg Parent-locked -====================== ============================================= - -In drivers/iio/: - -====================== ============================================= -gyro/mpu3050 Mux-locked -imu/inv_mpu6050/ Mux-locked -====================== ============================================= - -In drivers/media/: - -======================= ============================================= -dvb-frontends/lgdt3306a Mux-locked -dvb-frontends/m88ds3103 Parent-locked -dvb-frontends/rtl2830 Parent-locked -dvb-frontends/rtl2832 Mux-locked -dvb-frontends/si2168 Mux-locked -usb/cx231xx/ Parent-locked -======================= ============================================= +mux-locked or parent-locked muxes. Mux-locked muxes @@ -89,40 +52,8 @@ full transaction, unrelated I2C transfers may interleave the different stages of the transaction. This has the benefit that the mux driver may be easier and cleaner to implement, but it has some caveats. -==== ===================================================================== -ML1. If you build a topology with a mux-locked mux being the parent - of a parent-locked mux, this might break the expectation from the - parent-locked mux that the root adapter is locked during the - transaction. - -ML2. It is not safe to build arbitrary topologies with two (or more) - mux-locked muxes that are not siblings, when there are address - collisions between the devices on the child adapters of these - non-sibling muxes. - - I.e. the select-transfer-deselect transaction targeting e.g. device - address 0x42 behind mux-one may be interleaved with a similar - operation targeting device address 0x42 behind mux-two. The - intension with such a topology would in this hypothetical example - be that mux-one and mux-two should not be selected simultaneously, - but mux-locked muxes do not guarantee that in all topologies. - -ML3. A mux-locked mux cannot be used by a driver for auto-closing - gates/muxes, i.e. something that closes automatically after a given - number (one, in most cases) of I2C transfers. Unrelated I2C transfers - may creep in and close prematurely. - -ML4. If any non-I2C operation in the mux driver changes the I2C mux state, - the driver has to lock the root adapter during that operation. - Otherwise garbage may appear on the bus as seen from devices - behind the mux, when an unrelated I2C transfer is in flight during - the non-I2C mux-changing operation. -==== ===================================================================== - - Mux-locked Example ------------------- - +~~~~~~~~~~~~~~~~~~ :: @@ -153,6 +84,43 @@ This means that accesses to D2 are lockout out for the full duration of the entire operation. But accesses to D3 are possibly interleaved at any point. +Mux-locked caveats +~~~~~~~~~~~~~~~~~~ + +When using a mux-locked mux, be aware of the following restrictions: + +[ML1] + If you build a topology with a mux-locked mux being the parent + of a parent-locked mux, this might break the expectation from the + parent-locked mux that the root adapter is locked during the + transaction. + +[ML2] + It is not safe to build arbitrary topologies with two (or more) + mux-locked muxes that are not siblings, when there are address + collisions between the devices on the child adapters of these + non-sibling muxes. + + I.e. the select-transfer-deselect transaction targeting e.g. device + address 0x42 behind mux-one may be interleaved with a similar + operation targeting device address 0x42 behind mux-two. The + intent with such a topology would in this hypothetical example + be that mux-one and mux-two should not be selected simultaneously, + but mux-locked muxes do not guarantee that in all topologies. + +[ML3] + A mux-locked mux cannot be used by a driver for auto-closing + gates/muxes, i.e. something that closes automatically after a given + number (one, in most cases) of I2C transfers. Unrelated I2C transfers + may creep in and close prematurely. + +[ML4] + If any non-I2C operation in the mux driver changes the I2C mux state, + the driver has to lock the root adapter during that operation. + Otherwise garbage may appear on the bus as seen from devices + behind the mux, when an unrelated I2C transfer is in flight during + the non-I2C mux-changing operation. + Parent-locked muxes ------------------- @@ -161,28 +129,10 @@ Parent-locked muxes lock the parent adapter during the full select- transfer-deselect transaction. The implication is that the mux driver has to ensure that any and all I2C transfers through that parent adapter during the transaction are unlocked I2C transfers (using e.g. -__i2c_transfer), or a deadlock will follow. There are a couple of -caveats. - -==== ==================================================================== -PL1. If you build a topology with a parent-locked mux being the child - of another mux, this might break a possible assumption from the - child mux that the root adapter is unused between its select op - and the actual transfer (e.g. if the child mux is auto-closing - and the parent mux issues I2C transfers as part of its select). - This is especially the case if the parent mux is mux-locked, but - it may also happen if the parent mux is parent-locked. - -PL2. If select/deselect calls out to other subsystems such as gpio, - pinctrl, regmap or iio, it is essential that any I2C transfers - caused by these subsystems are unlocked. This can be convoluted to - accomplish, maybe even impossible if an acceptably clean solution - is sought. -==== ==================================================================== - +__i2c_transfer), or a deadlock will follow. Parent-locked Example ---------------------- +~~~~~~~~~~~~~~~~~~~~~ :: @@ -212,10 +162,30 @@ When there is an access to D1, this happens: 9. M1 unlocks its parent adapter. 10. M1 unlocks muxes on its parent. - This means that accesses to both D2 and D3 are locked out for the full duration of the entire operation. +Parent-locked Caveats +~~~~~~~~~~~~~~~~~~~~~ + +When using a parent-locked mux, be aware of the following restrictions: + +[PL1] + If you build a topology with a parent-locked mux being the child + of another mux, this might break a possible assumption from the + child mux that the root adapter is unused between its select op + and the actual transfer (e.g. if the child mux is auto-closing + and the parent mux issues I2C transfers as part of its select). + This is especially the case if the parent mux is mux-locked, but + it may also happen if the parent mux is parent-locked. + +[PL2] + If select/deselect calls out to other subsystems such as gpio, + pinctrl, regmap or iio, it is essential that any I2C transfers + caused by these subsystems are unlocked. This can be convoluted to + accomplish, maybe even impossible if an acceptably clean solution + is sought. + Complex Examples ================ @@ -261,8 +231,10 @@ This is a good topology:: When device D1 is accessed, accesses to D2 are locked out for the full duration of the operation (muxes on the top child adapter of M1 are locked). But accesses to D3 and D4 are possibly interleaved at -any point. Accesses to D3 locks out D1 and D2, but accesses to D4 -are still possibly interleaved. +any point. + +Accesses to D3 locks out D1 and D2, but accesses to D4 are still possibly +interleaved. Mux-locked mux as parent of parent-locked mux @@ -394,3 +366,47 @@ This is a good topology:: When D1 or D2 are accessed, accesses to D3 and D4 are locked out while accesses to D5 may interleave. When D3 or D4 are accessed, accesses to all other devices are locked out. + + +Mux type of existing device drivers +=================================== + +Whether a device is mux-locked or parent-locked depends on its +implementation. The following list was correct at the time of writing: + +In drivers/i2c/muxes/: + +====================== ============================================= +i2c-arb-gpio-challenge Parent-locked +i2c-mux-gpio Normally parent-locked, mux-locked iff + all involved gpio pins are controlled by the + same I2C root adapter that they mux. +i2c-mux-gpmux Normally parent-locked, mux-locked iff + specified in device-tree. +i2c-mux-ltc4306 Mux-locked +i2c-mux-mlxcpld Parent-locked +i2c-mux-pca9541 Parent-locked +i2c-mux-pca954x Parent-locked +i2c-mux-pinctrl Normally parent-locked, mux-locked iff + all involved pinctrl devices are controlled + by the same I2C root adapter that they mux. +i2c-mux-reg Parent-locked +====================== ============================================= + +In drivers/iio/: + +====================== ============================================= +gyro/mpu3050 Mux-locked +imu/inv_mpu6050/ Mux-locked +====================== ============================================= + +In drivers/media/: + +======================= ============================================= +dvb-frontends/lgdt3306a Mux-locked +dvb-frontends/m88ds3103 Parent-locked +dvb-frontends/rtl2830 Parent-locked +dvb-frontends/rtl2832 Mux-locked +dvb-frontends/si2168 Mux-locked +usb/cx231xx/ Parent-locked +======================= ============================================= diff --git a/Documentation/i2c/slave-interface.rst b/Documentation/i2c/slave-interface.rst index 82ea3e1d6fe4..3f0d320bc80a 100644 --- a/Documentation/i2c/slave-interface.rst +++ b/Documentation/i2c/slave-interface.rst @@ -32,9 +32,9 @@ User manual =========== I2C slave backends behave like standard I2C clients. So, you can instantiate -them as described in the document 'instantiating-devices'. The only difference -is that i2c slave backends have their own address space. So, you have to add -0x1000 to the address you would originally request. An example for +them as described in the document instantiating-devices.rst. The only +difference is that i2c slave backends have their own address space. So, you +have to add 0x1000 to the address you would originally request. An example for instantiating the slave-eeprom driver from userspace at the 7 bit address 0x64 on bus 1:: @@ -72,12 +72,15 @@ Event types: 'val': unused - 'ret': always 0 + 'ret': 0 if the backend is ready, otherwise some errno Another I2C master wants to write data to us. This event should be sent once our own address and the write bit was detected. The data did not arrive yet, so -there is nothing to process or return. Wakeup or initialization probably needs -to be done, though. +there is nothing to process or return. After returning, the bus driver must +always ack the address phase. If 'ret' is zero, backend initialization or +wakeup is done and further data may be received. If 'ret' is an errno, the bus +driver should nack all incoming bytes until the next stop condition to enforce +a retry of the transmission. * I2C_SLAVE_READ_REQUESTED (mandatory) diff --git a/Documentation/i2c/writing-clients.rst b/Documentation/i2c/writing-clients.rst index e3b126cf4a3b..b7d3ae7458f8 100644 --- a/Documentation/i2c/writing-clients.rst +++ b/Documentation/i2c/writing-clients.rst @@ -156,7 +156,7 @@ those devices, and a remove() method to unbind. :: static int foo_probe(struct i2c_client *client); - static int foo_remove(struct i2c_client *client); + static void foo_remove(struct i2c_client *client); Remember that the i2c_driver does not create those client handles. The handle may be used during foo_probe(). If foo_probe() reports success @@ -364,7 +364,7 @@ stop condition is issued between transaction. The i2c_msg structure contains for each message the client address, the number of bytes of the message and the message data itself. -You can read the file ``i2c-protocol`` for more information about the +You can read the file i2c-protocol.rst for more information about the actual I2C protocol. @@ -414,7 +414,7 @@ transactions return 0 on success; the 'read' transactions return the read value, except for block transactions, which return the number of values read. The block buffers need not be longer than 32 bytes. -You can read the file ``smbus-protocol`` for more information about the +You can read the file smbus-protocol.rst for more information about the actual SMBus protocol. diff --git a/Documentation/index.rst b/Documentation/index.rst index 4737c18c97ff..bf6aa681c960 100644 --- a/Documentation/index.rst +++ b/Documentation/index.rst @@ -1,11 +1,5 @@ .. SPDX-License-Identifier: GPL-2.0 - -.. The Linux Kernel documentation master file, created by - sphinx-quickstart on Fri Feb 12 13:51:46 2016. - You can adapt this file completely to your liking, but it should at least - contain the root `toctree` directive. - .. _linux_doc: The Linux Kernel documentation @@ -18,133 +12,85 @@ documents into a coherent whole. Please note that improvements to the documentation are welcome; join the linux-doc list at vger.kernel.org if you want to help out. -Licensing documentation ------------------------ +Working with the development community +-------------------------------------- -The following describes the license of the Linux kernel source code -(GPLv2), how to properly mark the license of individual files in the source -tree, as well as links to the full license text. - -* :ref:`kernel_licensing` - -User-oriented documentation ---------------------------- - -The following manuals are written for *users* of the kernel — those who are -trying to get it to work optimally on a given system. +The essential guides for interacting with the kernel's development +community and getting your work upstream. .. toctree:: - :maxdepth: 2 - - admin-guide/index - kbuild/index - -Firmware-related documentation ------------------------------- -The following holds information on the kernel's expectations regarding the -platform firmwares. + :maxdepth: 1 -.. toctree:: - :maxdepth: 2 + process/development-process + process/submitting-patches + Code of conduct <process/code-of-conduct> + maintainer/index + All development-process docs <process/index> - firmware-guide/index - devicetree/index -Application-developer documentation ------------------------------------ +Internal API manuals +-------------------- -The user-space API manual gathers together documents describing aspects of -the kernel interface as seen by application developers. +Manuals for use by developers working to interface with the rest of the +kernel. .. toctree:: - :maxdepth: 2 - - userspace-api/index + :maxdepth: 1 + core-api/index + driver-api/index + subsystem-apis + Locking in the kernel <locking/index> -Introduction to kernel development ----------------------------------- +Development tools and processes +------------------------------- -These manuals contain overall information about how to develop the kernel. -The kernel community is quite large, with thousands of developers -contributing over the course of a year. As with any large community, -knowing how things are done will make the process of getting your changes -merged much easier. +Various other manuals with useful information for all kernel developers. .. toctree:: - :maxdepth: 2 + :maxdepth: 1 - process/index - dev-tools/index + process/license-rules doc-guide/index + dev-tools/index + dev-tools/testing-overview kernel-hacking/index trace/index - maintainer/index fault-injection/index livepatch/index + rust/index -Kernel API documentation ------------------------- +User-oriented documentation +--------------------------- -These books get into the details of how specific kernel subsystems work -from the point of view of a kernel developer. Much of the information here -is taken directly from the kernel source, with supplemental material added -as needed (or at least as we managed to add it — probably *not* all that is -needed). +The following manuals are written for *users* of the kernel — those who are +trying to get it to work optimally on a given system and application +developers seeking information on the kernel's user-space APIs. .. toctree:: - :maxdepth: 2 + :maxdepth: 1 - driver-api/index - core-api/index - locking/index - accounting/index - block/index - cdrom/index - cpu-freq/index - fb/index - fpga/index - hid/index - i2c/index - iio/index - isdn/index - infiniband/index - leds/index - netlabel/index - networking/index - pcmcia/index - power/index - target/index - timers/index - spi/index - w1/index - watchdog/index - virt/index - input/index - hwmon/index - gpu/index - security/index - sound/index - crypto/index - filesystems/index - mm/index - bpf/index - usb/index - PCI/index - scsi/index - misc-devices/index - scheduler/index - mhi/index - peci/index - -Architecture-agnostic documentation ------------------------------------ + admin-guide/index + The kernel build system <kbuild/index> + admin-guide/reporting-issues.rst + User-space tools <tools/index> + userspace-api/index + +See also: the `Linux man pages <https://www.kernel.org/doc/man-pages/>`_, +which are kept separately from the kernel's own documentation. + +Firmware-related documentation +------------------------------ +The following holds information on the kernel's expectations regarding the +platform firmwares. .. toctree:: - :maxdepth: 2 + :maxdepth: 1 + + firmware-guide/index + devicetree/index - asm-annotations Architecture-specific documentation ----------------------------------- @@ -163,9 +109,8 @@ of the documentation body, or may require some adjustments and/or conversion to ReStructured Text format, or are simply too old. .. toctree:: - :maxdepth: 2 + :maxdepth: 1 - tools/index staging/index diff --git a/Documentation/input/joydev/joystick.rst b/Documentation/input/joydev/joystick.rst index f615906a0821..6d721396717a 100644 --- a/Documentation/input/joydev/joystick.rst +++ b/Documentation/input/joydev/joystick.rst @@ -517,6 +517,7 @@ All I-Force devices are supported by the iforce module. This includes: * AVB Mag Turbo Force * AVB Top Shot Pegasus * AVB Top Shot Force Feedback Racing Wheel +* Boeder Force Feedback Wheel * Logitech WingMan Force * Logitech WingMan Force Wheel * Guillemot Race Leader Force Feedback diff --git a/Documentation/kbuild/gcc-plugins.rst b/Documentation/kbuild/gcc-plugins.rst index 0ba76719f1b9..c578c6ba3eb6 100644 --- a/Documentation/kbuild/gcc-plugins.rst +++ b/Documentation/kbuild/gcc-plugins.rst @@ -90,7 +90,11 @@ e.g., on Ubuntu for gcc-10:: Or on Fedora:: - dnf install gcc-plugin-devel + dnf install gcc-plugin-devel libmpc-devel + +Or on Fedora when using cross-compilers that include plugins:: + + dnf install libmpc-devel Enable the GCC plugin infrastructure and some plugin(s) you want to use in the kernel config:: @@ -99,6 +103,19 @@ in the kernel config:: CONFIG_GCC_PLUGIN_LATENT_ENTROPY=y ... +Run gcc (native or cross-compiler) to ensure plugin headers are detected:: + + gcc -print-file-name=plugin + CROSS_COMPILE=arm-linux-gnu- ${CROSS_COMPILE}gcc -print-file-name=plugin + +The word "plugin" means they are not detected:: + + plugin + +A full path means they are detected:: + + /usr/lib/gcc/x86_64-redhat-linux/12/plugin + To compile the minimum tool set including the plugin(s):: make scripts diff --git a/Documentation/kbuild/kbuild.rst b/Documentation/kbuild/kbuild.rst index ef19b9c13523..08f575e6236c 100644 --- a/Documentation/kbuild/kbuild.rst +++ b/Documentation/kbuild/kbuild.rst @@ -48,6 +48,10 @@ KCFLAGS ------- Additional options to the C compiler (for built-in and modules). +KRUSTFLAGS +---------- +Additional options to the Rust compiler (for built-in and modules). + CFLAGS_KERNEL ------------- Additional options for $(CC) when used to compile @@ -57,6 +61,15 @@ CFLAGS_MODULE ------------- Additional module specific options to use for $(CC). +RUSTFLAGS_KERNEL +---------------- +Additional options for $(RUSTC) when used to compile +code that is compiled as built-in. + +RUSTFLAGS_MODULE +---------------- +Additional module specific options to use for $(RUSTC). + LDFLAGS_MODULE -------------- Additional options used for $(LD) when linking modules. @@ -69,6 +82,10 @@ HOSTCXXFLAGS ------------ Additional flags to be passed to $(HOSTCXX) when building host programs. +HOSTRUSTFLAGS +------------- +Additional flags to be passed to $(HOSTRUSTC) when building host programs. + HOSTLDFLAGS ----------- Additional flags to be passed when linking host programs. diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst index 11a296e52d68..5ea1e72d89c8 100644 --- a/Documentation/kbuild/makefiles.rst +++ b/Documentation/kbuild/makefiles.rst @@ -29,8 +29,9 @@ This document describes the Linux kernel Makefiles. --- 4.1 Simple Host Program --- 4.2 Composite Host Programs --- 4.3 Using C++ for host programs - --- 4.4 Controlling compiler options for host programs - --- 4.5 When host programs are actually built + --- 4.4 Using Rust for host programs + --- 4.5 Controlling compiler options for host programs + --- 4.6 When host programs are actually built === 5 Userspace Program support --- 5.1 Simple Userspace Program @@ -835,7 +836,24 @@ Both possibilities are described in the following. qconf-cxxobjs := qconf.o qconf-objs := check.o -4.4 Controlling compiler options for host programs +4.4 Using Rust for host programs +-------------------------------- + + Kbuild offers support for host programs written in Rust. However, + since a Rust toolchain is not mandatory for kernel compilation, + it may only be used in scenarios where Rust is required to be + available (e.g. when ``CONFIG_RUST`` is enabled). + + Example:: + + hostprogs := target + target-rust := y + + Kbuild will compile ``target`` using ``target.rs`` as the crate root, + located in the same directory as the ``Makefile``. The crate may + consist of several source files (see ``samples/rust/hostprogs``). + +4.5 Controlling compiler options for host programs -------------------------------------------------- When compiling host programs, it is possible to set specific flags. @@ -867,7 +885,7 @@ Both possibilities are described in the following. When linking qconf, it will be passed the extra option "-L$(QTDIR)/lib". -4.5 When host programs are actually built +4.6 When host programs are actually built ----------------------------------------- Kbuild will only build host-programs when they are referenced @@ -1181,6 +1199,17 @@ When kbuild executes, the following steps are followed (roughly): The first example utilises the trick that a config option expands to 'y' when selected. + KBUILD_RUSTFLAGS + $(RUSTC) compiler flags + + Default value - see top level Makefile + Append or modify as required per architecture. + + Often, the KBUILD_RUSTFLAGS variable depends on the configuration. + + Note that target specification file generation (for ``--target``) + is handled in ``scripts/generate_rust_target.rs``. + KBUILD_AFLAGS_KERNEL Assembler options specific for built-in @@ -1208,6 +1237,19 @@ When kbuild executes, the following steps are followed (roughly): are used for $(CC). From commandline CFLAGS_MODULE shall be used (see kbuild.rst). + KBUILD_RUSTFLAGS_KERNEL + $(RUSTC) options specific for built-in + + $(KBUILD_RUSTFLAGS_KERNEL) contains extra Rust compiler flags used to + compile resident kernel code. + + KBUILD_RUSTFLAGS_MODULE + Options for $(RUSTC) when building modules + + $(KBUILD_RUSTFLAGS_MODULE) is used to add arch-specific options that + are used for $(RUSTC). + From commandline RUSTFLAGS_MODULE shall be used (see kbuild.rst). + KBUILD_LDFLAGS_MODULE Options for $(LD) when linking modules diff --git a/Documentation/locking/seqlock.rst b/Documentation/locking/seqlock.rst index 64405e5da63e..bfda1a5fecad 100644 --- a/Documentation/locking/seqlock.rst +++ b/Documentation/locking/seqlock.rst @@ -39,7 +39,7 @@ as the writer can invalidate a pointer that the reader is following. Sequence counters (``seqcount_t``) ================================== -This is the the raw counting mechanism, which does not protect against +This is the raw counting mechanism, which does not protect against multiple writers. Write side critical sections must thus be serialized by an external lock. diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index 832b5d36e279..06f80e3785c5 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -52,7 +52,7 @@ CONTENTS - Varieties of memory barrier. - What may not be assumed about memory barriers? - - Data dependency barriers (historical). + - Address-dependency barriers (historical). - Control dependencies. - SMP barrier pairing. - Examples of memory barrier sequences. @@ -187,9 +187,9 @@ As a further example, consider this sequence of events: B = 4; Q = P; P = &B; D = *Q; -There is an obvious data dependency here, as the value loaded into D depends on -the address retrieved from P by CPU 2. At the end of the sequence, any of the -following results are possible: +There is an obvious address dependency here, as the value loaded into D depends +on the address retrieved from P by CPU 2. At the end of the sequence, any of +the following results are possible: (Q == &A) and (D == 1) (Q == &B) and (D == 2) @@ -391,58 +391,62 @@ Memory barriers come in four basic varieties: memory system as time progresses. All stores _before_ a write barrier will occur _before_ all the stores after the write barrier. - [!] Note that write barriers should normally be paired with read or data - dependency barriers; see the "SMP barrier pairing" subsection. + [!] Note that write barriers should normally be paired with read or + address-dependency barriers; see the "SMP barrier pairing" subsection. - (2) Data dependency barriers. + (2) Address-dependency barriers (historical). - A data dependency barrier is a weaker form of read barrier. In the case - where two loads are performed such that the second depends on the result - of the first (eg: the first load retrieves the address to which the second - load will be directed), a data dependency barrier would be required to - make sure that the target of the second load is updated after the address - obtained by the first load is accessed. + An address-dependency barrier is a weaker form of read barrier. In the + case where two loads are performed such that the second depends on the + result of the first (eg: the first load retrieves the address to which + the second load will be directed), an address-dependency barrier would + be required to make sure that the target of the second load is updated + after the address obtained by the first load is accessed. - A data dependency barrier is a partial ordering on interdependent loads - only; it is not required to have any effect on stores, independent loads - or overlapping loads. + An address-dependency barrier is a partial ordering on interdependent + loads only; it is not required to have any effect on stores, independent + loads or overlapping loads. As mentioned in (1), the other CPUs in the system can be viewed as committing sequences of stores to the memory system that the CPU being - considered can then perceive. A data dependency barrier issued by the CPU - under consideration guarantees that for any load preceding it, if that - load touches one of a sequence of stores from another CPU, then by the - time the barrier completes, the effects of all the stores prior to that - touched by the load will be perceptible to any loads issued after the data - dependency barrier. + considered can then perceive. An address-dependency barrier issued by + the CPU under consideration guarantees that for any load preceding it, + if that load touches one of a sequence of stores from another CPU, then + by the time the barrier completes, the effects of all the stores prior to + that touched by the load will be perceptible to any loads issued after + the address-dependency barrier. See the "Examples of memory barrier sequences" subsection for diagrams showing the ordering constraints. - [!] Note that the first load really has to have a _data_ dependency and + [!] Note that the first load really has to have an _address_ dependency and not a control dependency. If the address for the second load is dependent on the first load, but the dependency is through a conditional rather than actually loading the address itself, then it's a _control_ dependency and a full read barrier or better is required. See the "Control dependencies" subsection for more information. - [!] Note that data dependency barriers should normally be paired with + [!] Note that address-dependency barriers should normally be paired with write barriers; see the "SMP barrier pairing" subsection. + [!] Kernel release v5.9 removed kernel APIs for explicit address- + dependency barriers. Nowadays, APIs for marking loads from shared + variables such as READ_ONCE() and rcu_dereference() provide implicit + address-dependency barriers. (3) Read (or load) memory barriers. - A read barrier is a data dependency barrier plus a guarantee that all the - LOAD operations specified before the barrier will appear to happen before - all the LOAD operations specified after the barrier with respect to the - other components of the system. + A read barrier is an address-dependency barrier plus a guarantee that all + the LOAD operations specified before the barrier will appear to happen + before all the LOAD operations specified after the barrier with respect to + the other components of the system. A read barrier is a partial ordering on loads only; it is not required to have any effect on stores. - Read memory barriers imply data dependency barriers, and so can substitute - for them. + Read memory barriers imply address-dependency barriers, and so can + substitute for them. [!] Note that read barriers should normally be paired with write barriers; see the "SMP barrier pairing" subsection. @@ -550,17 +554,21 @@ There are certain things that the Linux kernel memory barriers do not guarantee: Documentation/core-api/dma-api.rst -DATA DEPENDENCY BARRIERS (HISTORICAL) -------------------------------------- +ADDRESS-DEPENDENCY BARRIERS (HISTORICAL) +---------------------------------------- As of v4.15 of the Linux kernel, an smp_mb() was added to READ_ONCE() for DEC Alpha, which means that about the only people who need to pay attention to this section are those working on DEC Alpha architecture-specific code and those working on READ_ONCE() itself. For those who need it, and for those who are interested in the history, here is the story of -data-dependency barriers. +address-dependency barriers. + +[!] While address dependencies are observed in both load-to-load and +load-to-store relations, address-dependency barriers are not necessary +for load-to-store situations. -The usage requirements of data dependency barriers are a little subtle, and +The requirement of address-dependency barriers is a little subtle, and it's not always obvious that they're needed. To illustrate, consider the following sequence of events: @@ -570,11 +578,14 @@ following sequence of events: B = 4; <write barrier> WRITE_ONCE(P, &B); - Q = READ_ONCE(P); + Q = READ_ONCE_OLD(P); D = *Q; -There's a clear data dependency here, and it would seem that by the end of the -sequence, Q must be either &A or &B, and that: +[!] READ_ONCE_OLD() corresponds to READ_ONCE() of pre-4.15 kernel, which +doesn't imply an address-dependency barrier. + +There's a clear address dependency here, and it would seem that by the end of +the sequence, Q must be either &A or &B, and that: (Q == &A) implies (D == 1) (Q == &B) implies (D == 4) @@ -588,8 +599,8 @@ While this may seem like a failure of coherency or causality maintenance, it isn't, and this behaviour can be observed on certain real CPUs (such as the DEC Alpha). -To deal with this, a data dependency barrier or better must be inserted -between the address load and the data load: +To deal with this, READ_ONCE() provides an implicit address-dependency barrier +since kernel release v4.15: CPU 1 CPU 2 =============== =============== @@ -598,7 +609,7 @@ between the address load and the data load: <write barrier> WRITE_ONCE(P, &B); Q = READ_ONCE(P); - <data dependency barrier> + <implicit address-dependency barrier> D = *Q; This enforces the occurrence of one of the two implications, and prevents the @@ -615,13 +626,13 @@ odd-numbered bank is idle, one can see the new value of the pointer P (&B), but the old value of the variable B (2). -A data-dependency barrier is not required to order dependent writes -because the CPUs that the Linux kernel supports don't do writes -until they are certain (1) that the write will actually happen, (2) -of the location of the write, and (3) of the value to be written. +An address-dependency barrier is not required to order dependent writes +because the CPUs that the Linux kernel supports don't do writes until they +are certain (1) that the write will actually happen, (2) of the location of +the write, and (3) of the value to be written. But please carefully read the "CONTROL DEPENDENCIES" section and the -Documentation/RCU/rcu_dereference.rst file: The compiler can and does -break dependencies in a great many highly creative ways. +Documentation/RCU/rcu_dereference.rst file: The compiler can and does break +dependencies in a great many highly creative ways. CPU 1 CPU 2 =============== =============== @@ -629,12 +640,12 @@ break dependencies in a great many highly creative ways. B = 4; <write barrier> WRITE_ONCE(P, &B); - Q = READ_ONCE(P); + Q = READ_ONCE_OLD(P); WRITE_ONCE(*Q, 5); -Therefore, no data-dependency barrier is required to order the read into +Therefore, no address-dependency barrier is required to order the read into Q with the store into *Q. In other words, this outcome is prohibited, -even without a data-dependency barrier: +even without an implicit address-dependency barrier of modern READ_ONCE(): (Q == &B) && (B == 4) @@ -645,12 +656,12 @@ can be used to record rare error conditions and the like, and the CPUs' naturally occurring ordering prevents such records from being lost. -Note well that the ordering provided by a data dependency is local to +Note well that the ordering provided by an address dependency is local to the CPU containing it. See the section on "Multicopy atomicity" for more information. -The data dependency barrier is very important to the RCU system, +The address-dependency barrier is very important to the RCU system, for example. See rcu_assign_pointer() and rcu_dereference() in include/linux/rcupdate.h. This permits the current target of an RCU'd pointer to be replaced with a new modified target, without the replacement @@ -667,20 +678,21 @@ not understand them. The purpose of this section is to help you prevent the compiler's ignorance from breaking your code. A load-load control dependency requires a full read memory barrier, not -simply a data dependency barrier to make it work correctly. Consider the -following bit of code: +simply an (implicit) address-dependency barrier to make it work correctly. +Consider the following bit of code: q = READ_ONCE(a); + <implicit address-dependency barrier> if (q) { - <data dependency barrier> /* BUG: No data dependency!!! */ + /* BUG: No address dependency!!! */ p = READ_ONCE(b); } -This will not have the desired effect because there is no actual data +This will not have the desired effect because there is no actual address dependency, but rather a control dependency that the CPU may short-circuit by attempting to predict the outcome in advance, so that other CPUs see -the load from b as having happened before the load from a. In such a -case what's actually required is: +the load from b as having happened before the load from a. In such a case +what's actually required is: q = READ_ONCE(a); if (q) { @@ -927,9 +939,9 @@ General barriers pair with each other, though they also pair with most other types of barriers, albeit without multicopy atomicity. An acquire barrier pairs with a release barrier, but both may also pair with other barriers, including of course general barriers. A write barrier pairs -with a data dependency barrier, a control dependency, an acquire barrier, +with an address-dependency barrier, a control dependency, an acquire barrier, a release barrier, a read barrier, or a general barrier. Similarly a -read barrier, control dependency, or a data dependency barrier pairs +read barrier, control dependency, or an address-dependency barrier pairs with a write barrier, an acquire barrier, a release barrier, or a general barrier: @@ -948,7 +960,7 @@ Or: a = 1; <write barrier> WRITE_ONCE(b, &a); x = READ_ONCE(b); - <data dependency barrier> + <implicit address-dependency barrier> y = *x; Or even: @@ -968,8 +980,8 @@ Basically, the read barrier always has to be there, even though it can be of the "weaker" type. [!] Note that the stores before the write barrier would normally be expected to -match the loads after the read barrier or the data dependency barrier, and vice -versa: +match the loads after the read barrier or the address-dependency barrier, and +vice versa: CPU 1 CPU 2 =================== =================== @@ -1021,8 +1033,8 @@ STORE B, STORE C } all occurring before the unordered set of { STORE D, STORE E V -Secondly, data dependency barriers act as partial orderings on data-dependent -loads. Consider the following sequence of events: +Secondly, address-dependency barriers act as partial orderings on address- +dependent loads. Consider the following sequence of events: CPU 1 CPU 2 ======================= ======================= @@ -1067,8 +1079,8 @@ effectively random order, despite the write barrier issued by CPU 1: In the above example, CPU 2 perceives that B is 7, despite the load of *C (which would be B) coming after the LOAD of C. -If, however, a data dependency barrier were to be placed between the load of C -and the load of *C (ie: B) on CPU 2: +If, however, an address-dependency barrier were to be placed between the load +of C and the load of *C (ie: B) on CPU 2: CPU 1 CPU 2 ======================= ======================= @@ -1078,7 +1090,7 @@ and the load of *C (ie: B) on CPU 2: <write barrier> STORE C = &B LOAD X STORE D = 4 LOAD C (gets &B) - <data dependency barrier> + <address-dependency barrier> LOAD *C (reads B) then the following will occur: @@ -1101,7 +1113,7 @@ then the following will occur: | +-------+ | | | | X->9 |------>| | | +-------+ | | - Makes sure all effects ---> \ ddddddddddddddddd | | + Makes sure all effects ---> \ aaaaaaaaaaaaaaaaa | | prior to the store of C \ +-------+ | | are perceptible to ----->| B->2 |------>| | subsequent loads +-------+ | | @@ -1292,7 +1304,7 @@ Which might appear as this: LOAD with immediate effect : : +-------+ -Placing a read barrier or a data dependency barrier just before the second +Placing a read barrier or an address-dependency barrier just before the second load: CPU 1 CPU 2 @@ -1816,20 +1828,20 @@ which may then reorder things however it wishes. CPU MEMORY BARRIERS ------------------- -The Linux kernel has eight basic CPU memory barriers: +The Linux kernel has seven basic CPU memory barriers: - TYPE MANDATORY SMP CONDITIONAL - =============== ======================= =========================== - GENERAL mb() smp_mb() - WRITE wmb() smp_wmb() - READ rmb() smp_rmb() - DATA DEPENDENCY READ_ONCE() + TYPE MANDATORY SMP CONDITIONAL + ======================= =============== =============== + GENERAL mb() smp_mb() + WRITE wmb() smp_wmb() + READ rmb() smp_rmb() + ADDRESS DEPENDENCY READ_ONCE() -All memory barriers except the data dependency barriers imply a compiler -barrier. Data dependencies do not impose any additional compiler ordering. +All memory barriers except the address-dependency barriers imply a compiler +barrier. Address dependencies do not impose any additional compiler ordering. -Aside: In the case of data dependencies, the compiler would be expected +Aside: In the case of address dependencies, the compiler would be expected to issue the loads in the correct order (eg. `a[b]` would have to load the value of b before loading a[b]), however there is no guarantee in the C specification that the compiler may not speculate the value of b @@ -2749,7 +2761,8 @@ is discarded from the CPU's cache and reloaded. To deal with this, the appropriate part of the kernel must invalidate the overlapping bits of the cache on each CPU. -See Documentation/core-api/cachetlb.rst for more information on cache management. +See Documentation/core-api/cachetlb.rst for more information on cache +management. CACHE COHERENCY VS MMIO @@ -2889,8 +2902,8 @@ AND THEN THERE'S THE ALPHA The DEC Alpha CPU is one of the most relaxed CPUs there is. Not only that, some versions of the Alpha CPU have a split data cache, permitting them to have two semantically-related cache lines updated at separate times. This is where -the data dependency barrier really becomes necessary as this synchronises both -caches with the memory coherence system, thus making it seem like pointer +the address-dependency barrier really becomes necessary as this synchronises +both caches with the memory coherence system, thus making it seem like pointer changes vs new data occur in the right order. The Alpha defines the Linux kernel's memory model, although as of v4.15 diff --git a/Documentation/mm/unevictable-lru.rst b/Documentation/mm/unevictable-lru.rst index b280367d6a44..4a0e158aa9ce 100644 --- a/Documentation/mm/unevictable-lru.rst +++ b/Documentation/mm/unevictable-lru.rst @@ -197,7 +197,7 @@ unevictable list for the memory cgroup and node being scanned. There may be situations where a page is mapped into a VM_LOCKED VMA, but the page is not marked as PG_mlocked. Such pages will make it all the way to shrink_active_list() or shrink_page_list() where they will be detected when -vmscan walks the reverse map in page_referenced() or try_to_unmap(). The page +vmscan walks the reverse map in folio_referenced() or try_to_unmap(). The page is culled to the unevictable list when it is released by the shrinker. To "cull" an unevictable page, vmscan simply puts the page back on the LRU list @@ -267,7 +267,7 @@ the LRU. Such pages can be "noticed" by memory management in several places: (4) in the fault path and when a VM_LOCKED stack segment is expanded; or (5) as mentioned above, in vmscan:shrink_page_list() when attempting to - reclaim a page in a VM_LOCKED VMA by page_referenced() or try_to_unmap(). + reclaim a page in a VM_LOCKED VMA by folio_referenced() or try_to_unmap(). mlocked pages become unlocked and rescued from the unevictable list when: @@ -547,7 +547,7 @@ vmscan's shrink_inactive_list() and shrink_page_list() also divert obviously unevictable pages found on the inactive lists to the appropriate memory cgroup and node unevictable list. -rmap's page_referenced_one(), called via vmscan's shrink_active_list() or +rmap's folio_referenced_one(), called via vmscan's shrink_active_list() or shrink_page_list(), and rmap's try_to_unmap_one() called via shrink_page_list(), check for (3) pages still mapped into VM_LOCKED VMAs, and call mlock_vma_page() to correct them. Such pages are culled to the unevictable list when released diff --git a/Documentation/networking/bonding.rst b/Documentation/networking/bonding.rst index 7823a069a903..96cd7a26f3d9 100644 --- a/Documentation/networking/bonding.rst +++ b/Documentation/networking/bonding.rst @@ -846,7 +846,7 @@ primary_reselect tlb_dynamic_lb Specifies if dynamic shuffling of flows is enabled in tlb - mode. The value has no effect on any other modes. + or alb mode. The value has no effect on any other modes. The default behavior of tlb mode is to shuffle active flows across slaves based on the load in that interval. This gives nice lb diff --git a/Documentation/networking/decnet.rst b/Documentation/networking/decnet.rst deleted file mode 100644 index b8bc11ff8370..000000000000 --- a/Documentation/networking/decnet.rst +++ /dev/null @@ -1,243 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -========================================= -Linux DECnet Networking Layer Information -========================================= - -1. Other documentation.... -========================== - - - Project Home Pages - - http://www.chygwyn.com/ - Kernel info - - http://linux-decnet.sourceforge.net/ - Userland tools - - http://www.sourceforge.net/projects/linux-decnet/ - Status page - -2. Configuring the kernel -========================= - -Be sure to turn on the following options: - - - CONFIG_DECNET (obviously) - - CONFIG_PROC_FS (to see what's going on) - - CONFIG_SYSCTL (for easy configuration) - -if you want to try out router support (not properly debugged yet) -you'll need the following options as well... - - - CONFIG_DECNET_ROUTER (to be able to add/delete routes) - - CONFIG_NETFILTER (will be required for the DECnet routing daemon) - -Don't turn on SIOCGIFCONF support for DECnet unless you are really sure -that you need it, in general you won't and it can cause ifconfig to -malfunction. - -Run time configuration has changed slightly from the 2.4 system. If you -want to configure an endnode, then the simplified procedure is as follows: - - - Set the MAC address on your ethernet card before starting _any_ other - network protocols. - -As soon as your network card is brought into the UP state, DECnet should -start working. If you need something more complicated or are unsure how -to set the MAC address, see the next section. Also all configurations which -worked with 2.4 will work under 2.5 with no change. - -3. Command line options -======================= - -You can set a DECnet address on the kernel command line for compatibility -with the 2.4 configuration procedure, but in general it's not needed any more. -If you do st a DECnet address on the command line, it has only one purpose -which is that its added to the addresses on the loopback device. - -With 2.4 kernels, DECnet would only recognise addresses as local if they -were added to the loopback device. In 2.5, any local interface address -can be used to loop back to the local machine. Of course this does not -prevent you adding further addresses to the loopback device if you -want to. - -N.B. Since the address list of an interface determines the addresses for -which "hello" messages are sent, if you don't set an address on the loopback -interface then you won't see any entries in /proc/net/neigh for the local -host until such time as you start a connection. This doesn't affect the -operation of the local communications in any other way though. - -The kernel command line takes options looking like the following:: - - decnet.addr=1,2 - -the two numbers are the node address 1,2 = 1.2 For 2.2.xx kernels -and early 2.3.xx kernels, you must use a comma when specifying the -DECnet address like this. For more recent 2.3.xx kernels, you may -use almost any character except space, although a `.` would be the most -obvious choice :-) - -There used to be a third number specifying the node type. This option -has gone away in favour of a per interface node type. This is now set -using /proc/sys/net/decnet/conf/<dev>/forwarding. This file can be -set with a single digit, 0=EndNode, 1=L1 Router and 2=L2 Router. - -There are also equivalent options for modules. The node address can -also be set through the /proc/sys/net/decnet/ files, as can other system -parameters. - -Currently the only supported devices are ethernet and ip_gre. The -ethernet address of your ethernet card has to be set according to the DECnet -address of the node in order for it to be autoconfigured (and then appear in -/proc/net/decnet_dev). There is a utility available at the above -FTP sites called dn2ethaddr which can compute the correct ethernet -address to use. The address can be set by ifconfig either before or -at the time the device is brought up. If you are using RedHat you can -add the line:: - - MACADDR=AA:00:04:00:03:04 - -or something similar, to /etc/sysconfig/network-scripts/ifcfg-eth0 or -wherever your network card's configuration lives. Setting the MAC address -of your ethernet card to an address starting with "hi-ord" will cause a -DECnet address which matches to be added to the interface (which you can -verify with iproute2). - -The default device for routing can be set through the /proc filesystem -by setting /proc/sys/net/decnet/default_device to the -device you want DECnet to route packets out of when no specific route -is available. Usually this will be eth0, for example:: - - echo -n "eth0" >/proc/sys/net/decnet/default_device - -If you don't set the default device, then it will default to the first -ethernet card which has been autoconfigured as described above. You can -confirm that by looking in the default_device file of course. - -There is a list of what the other files under /proc/sys/net/decnet/ do -on the kernel patch web site (shown above). - -4. Run time kernel configuration -================================ - - -This is either done through the sysctl/proc interface (see the kernel web -pages for details on what the various options do) or through the iproute2 -package in the same way as IPv4/6 configuration is performed. - -Documentation for iproute2 is included with the package, although there is -as yet no specific section on DECnet, most of the features apply to both -IP and DECnet, albeit with DECnet addresses instead of IP addresses and -a reduced functionality. - -If you want to configure a DECnet router you'll need the iproute2 package -since its the _only_ way to add and delete routes currently. Eventually -there will be a routing daemon to send and receive routing messages for -each interface and update the kernel routing tables accordingly. The -routing daemon will use netfilter to listen to routing packets, and -rtnetlink to update the kernels routing tables. - -The DECnet raw socket layer has been removed since it was there purely -for use by the routing daemon which will now use netfilter (a much cleaner -and more generic solution) instead. - -5. How can I tell if its working? -================================= - -Here is a quick guide of what to look for in order to know if your DECnet -kernel subsystem is working. - - - Is the node address set (see /proc/sys/net/decnet/node_address) - - Is the node of the correct type - (see /proc/sys/net/decnet/conf/<dev>/forwarding) - - Is the Ethernet MAC address of each Ethernet card set to match - the DECnet address. If in doubt use the dn2ethaddr utility available - at the ftp archive. - - If the previous two steps are satisfied, and the Ethernet card is up, - you should find that it is listed in /proc/net/decnet_dev and also - that it appears as a directory in /proc/sys/net/decnet/conf/. The - loopback device (lo) should also appear and is required to communicate - within a node. - - If you have any DECnet routers on your network, they should appear - in /proc/net/decnet_neigh, otherwise this file will only contain the - entry for the node itself (if it doesn't check to see if lo is up). - - If you want to send to any node which is not listed in the - /proc/net/decnet_neigh file, you'll need to set the default device - to point to an Ethernet card with connection to a router. This is - again done with the /proc/sys/net/decnet/default_device file. - - Try starting a simple server and client, like the dnping/dnmirror - over the loopback interface. With luck they should communicate. - For this step and those after, you'll need the DECnet library - which can be obtained from the above ftp sites as well as the - actual utilities themselves. - - If this seems to work, then try talking to a node on your local - network, and see if you can obtain the same results. - - At this point you are on your own... :-) - -6. How to send a bug report -=========================== - -If you've found a bug and want to report it, then there are several things -you can do to help me work out exactly what it is that is wrong. Useful -information (_most_ of which _is_ _essential_) includes: - - - What kernel version are you running ? - - What version of the patch are you running ? - - How far though the above set of tests can you get ? - - What is in the /proc/decnet* files and /proc/sys/net/decnet/* files ? - - Which services are you running ? - - Which client caused the problem ? - - How much data was being transferred ? - - Was the network congested ? - - How can the problem be reproduced ? - - Can you use tcpdump to get a trace ? (N.B. Most (all?) versions of - tcpdump don't understand how to dump DECnet properly, so including - the hex listing of the packet contents is _essential_, usually the -x flag. - You may also need to increase the length grabbed with the -s flag. The - -e flag also provides very useful information (ethernet MAC addresses)) - -7. MAC FAQ -========== - -A quick FAQ on ethernet MAC addresses to explain how Linux and DECnet -interact and how to get the best performance from your hardware. - -Ethernet cards are designed to normally only pass received network frames -to a host computer when they are addressed to it, or to the broadcast address. - -Linux has an interface which allows the setting of extra addresses for -an ethernet card to listen to. If the ethernet card supports it, the -filtering operation will be done in hardware, if not the extra unwanted packets -received will be discarded by the host computer. In the latter case, -significant processor time and bus bandwidth can be used up on a busy -network (see the NAPI documentation for a longer explanation of these -effects). - -DECnet makes use of this interface to allow running DECnet on an ethernet -card which has already been configured using TCP/IP (presumably using the -built in MAC address of the card, as usual) and/or to allow multiple DECnet -addresses on each physical interface. If you do this, be aware that if your -ethernet card doesn't support perfect hashing in its MAC address filter -then your computer will be doing more work than required. Some cards -will simply set themselves into promiscuous mode in order to receive -packets from the DECnet specified addresses. So if you have one of these -cards its better to set the MAC address of the card as described above -to gain the best efficiency. Better still is to use a card which supports -NAPI as well. - - -8. Mailing list -=============== - -If you are keen to get involved in development, or want to ask questions -about configuration, or even just report bugs, then there is a mailing -list that you can join, details are at: - -http://sourceforge.net/mail/?group_id=4993 - -9. Legal Info -============= - -The Linux DECnet project team have placed their code under the GPL. The -software is provided "as is" and without warranty express or implied. -DECnet is a trademark of Compaq. This software is not a product of -Compaq. We acknowledge the help of people at Compaq in providing extra -documentation above and beyond what was previously publicly available. - -Steve Whitehouse <SteveW@ACM.org> - diff --git a/Documentation/networking/device_drivers/can/freescale/flexcan.rst b/Documentation/networking/device_drivers/can/freescale/flexcan.rst index 4e3eec6cecd2..106cd2890135 100644 --- a/Documentation/networking/device_drivers/can/freescale/flexcan.rst +++ b/Documentation/networking/device_drivers/can/freescale/flexcan.rst @@ -5,7 +5,7 @@ Flexcan CAN Controller driver ============================= Authors: Marc Kleine-Budde <mkl@pengutronix.de>, -Dario Binacchi <dario.binacchi@amarula.solutions.com> +Dario Binacchi <dario.binacchi@amarulasolutions.com> On/off RTR frames reception =========================== diff --git a/Documentation/networking/device_drivers/ethernet/index.rst b/Documentation/networking/device_drivers/ethernet/index.rst index 7f1777173abb..5196905582c5 100644 --- a/Documentation/networking/device_drivers/ethernet/index.rst +++ b/Documentation/networking/device_drivers/ethernet/index.rst @@ -52,6 +52,7 @@ Contents: ti/tlan toshiba/spider_net wangxun/txgbe + wangxun/ngbe .. only:: subproject and html diff --git a/Documentation/networking/device_drivers/ethernet/wangxun/ngbe.rst b/Documentation/networking/device_drivers/ethernet/wangxun/ngbe.rst new file mode 100644 index 000000000000..43a02f9943e1 --- /dev/null +++ b/Documentation/networking/device_drivers/ethernet/wangxun/ngbe.rst @@ -0,0 +1,14 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================================================= +Linux Base Driver for WangXun(R) Gigabit PCI Express Adapters +============================================================= + +WangXun Gigabit Linux driver. +Copyright (c) 2019 - 2022 Beijing WangXun Technology Co., Ltd. + +Support +======= + If you have problems with the software or hardware, please contact our + customer support team via email at nic-support@net-swift.com or check our website + at https://www.net-swift.com diff --git a/Documentation/networking/devlink/ice.rst b/Documentation/networking/devlink/ice.rst index 8c082b139bbd..0c89ceb8986d 100644 --- a/Documentation/networking/devlink/ice.rst +++ b/Documentation/networking/devlink/ice.rst @@ -139,6 +139,42 @@ EMP firmware image. The driver does not currently support reloading the driver via ``DEVLINK_RELOAD_ACTION_DRIVER_REINIT``. +Port split +========== + +The ``ice`` driver supports port splitting only for port 0, as the FW has +a predefined set of available port split options for the whole device. + +A system reboot is required for port split to be applied. + +The following command will select the port split option with 4 ports: + +.. code:: shell + + $ devlink port split pci/0000:16:00.0/0 count 4 + +The list of all available port options will be printed to dynamic debug after +each ``split`` and ``unsplit`` command. The first option is the default. + +.. code:: shell + + ice 0000:16:00.0: Available port split options and max port speeds (Gbps): + ice 0000:16:00.0: Status Split Quad 0 Quad 1 + ice 0000:16:00.0: count L0 L1 L2 L3 L4 L5 L6 L7 + ice 0000:16:00.0: Active 2 100 - - - 100 - - - + ice 0000:16:00.0: 2 50 - 50 - - - - - + ice 0000:16:00.0: Pending 4 25 25 25 25 - - - - + ice 0000:16:00.0: 4 25 25 - - 25 25 - - + ice 0000:16:00.0: 8 10 10 10 10 10 10 10 10 + ice 0000:16:00.0: 1 100 - - - - - - - + +There could be multiple FW port options with the same port split count. When +the same port split count request is issued again, the next FW port option with +the same port split count will be selected. + +``devlink port unsplit`` will select the option with a split count of 1. If +there is no FW option available with split count 1, you will receive an error. + Regions ======= diff --git a/Documentation/networking/devlink/index.rst b/Documentation/networking/devlink/index.rst index e3a5f985673e..4b653d040627 100644 --- a/Documentation/networking/devlink/index.rst +++ b/Documentation/networking/devlink/index.rst @@ -13,10 +13,8 @@ new APIs prefixed by ``devl_*``. The older APIs handle all the locking in devlink core, but don't allow registration of most sub-objects once the main devlink object is itself registered. The newer ``devl_*`` APIs assume the devlink instance lock is already held. Drivers can take the instance -lock by calling ``devl_lock()``. It is also held in most of the callbacks. -Eventually all callbacks will be invoked under the devlink instance lock, -refer to the use of the ``DEVLINK_NL_FLAG_NO_LOCK`` flag in devlink core -to find out which callbacks are not converted, yet. +lock by calling ``devl_lock()``. It is also held all callbacks of devlink +netlink commands. Drivers are encouraged to use the devlink instance lock for their own needs. diff --git a/Documentation/networking/devlink/netdevsim.rst b/Documentation/networking/devlink/netdevsim.rst index 8a292fb5aaea..ec5e6d79b2e2 100644 --- a/Documentation/networking/devlink/netdevsim.rst +++ b/Documentation/networking/devlink/netdevsim.rst @@ -67,7 +67,7 @@ The ``netdevsim`` driver supports rate objects management, which includes: - setting tx_share and tx_max rate values for any rate object type; - setting parent node for any rate object type. -Rate nodes and it's parameters are exposed in ``netdevsim`` debugfs in RO mode. +Rate nodes and their parameters are exposed in ``netdevsim`` debugfs in RO mode. For example created rate node with name ``some_group``: .. code:: shell diff --git a/Documentation/networking/driver.rst b/Documentation/networking/driver.rst index c8f59dbda46f..64f7236ff10b 100644 --- a/Documentation/networking/driver.rst +++ b/Documentation/networking/driver.rst @@ -8,7 +8,7 @@ Transmit path guidelines: 1) The ndo_start_xmit method must not return NETDEV_TX_BUSY under any normal circumstances. It is considered a hard error unless - there is no way your device can tell ahead of time when it's + there is no way your device can tell ahead of time when its transmit function will become busy. Instead it must maintain the queue properly. For example, diff --git a/Documentation/networking/dsa/configuration.rst b/Documentation/networking/dsa/configuration.rst index 2b08f1a772d3..827701f8cbfe 100644 --- a/Documentation/networking/dsa/configuration.rst +++ b/Documentation/networking/dsa/configuration.rst @@ -49,6 +49,9 @@ In this documentation the following Ethernet interfaces are used: *eth0* the master interface +*eth1* + another master interface + *lan1* a slave interface @@ -360,3 +363,96 @@ the ``self`` flag) has been removed. This results in the following changes: Script writers are therefore encouraged to use the ``master static`` set of flags when working with bridge FDB entries on DSA switch interfaces. + +Affinity of user ports to CPU ports +----------------------------------- + +Typically, DSA switches are attached to the host via a single Ethernet +interface, but in cases where the switch chip is discrete, the hardware design +may permit the use of 2 or more ports connected to the host, for an increase in +termination throughput. + +DSA can make use of multiple CPU ports in two ways. First, it is possible to +statically assign the termination traffic associated with a certain user port +to be processed by a certain CPU port. This way, user space can implement +custom policies of static load balancing between user ports, by spreading the +affinities according to the available CPU ports. + +Secondly, it is possible to perform load balancing between CPU ports on a per +packet basis, rather than statically assigning user ports to CPU ports. +This can be achieved by placing the DSA masters under a LAG interface (bonding +or team). DSA monitors this operation and creates a mirror of this software LAG +on the CPU ports facing the physical DSA masters that constitute the LAG slave +devices. + +To make use of multiple CPU ports, the firmware (device tree) description of +the switch must mark all the links between CPU ports and their DSA masters +using the ``ethernet`` reference/phandle. At startup, only a single CPU port +and DSA master will be used - the numerically first port from the firmware +description which has an ``ethernet`` property. It is up to the user to +configure the system for the switch to use other masters. + +DSA uses the ``rtnl_link_ops`` mechanism (with a "dsa" ``kind``) to allow +changing the DSA master of a user port. The ``IFLA_DSA_MASTER`` u32 netlink +attribute contains the ifindex of the master device that handles each slave +device. The DSA master must be a valid candidate based on firmware node +information, or a LAG interface which contains only slaves which are valid +candidates. + +Using iproute2, the following manipulations are possible: + + .. code-block:: sh + + # See the DSA master in current use + ip -d link show dev swp0 + (...) + dsa master eth0 + + # Static CPU port distribution + ip link set swp0 type dsa master eth1 + ip link set swp1 type dsa master eth0 + ip link set swp2 type dsa master eth1 + ip link set swp3 type dsa master eth0 + + # CPU ports in LAG, using explicit assignment of the DSA master + ip link add bond0 type bond mode balance-xor && ip link set bond0 up + ip link set eth1 down && ip link set eth1 master bond0 + ip link set swp0 type dsa master bond0 + ip link set swp1 type dsa master bond0 + ip link set swp2 type dsa master bond0 + ip link set swp3 type dsa master bond0 + ip link set eth0 down && ip link set eth0 master bond0 + ip -d link show dev swp0 + (...) + dsa master bond0 + + # CPU ports in LAG, relying on implicit migration of the DSA master + ip link add bond0 type bond mode balance-xor && ip link set bond0 up + ip link set eth0 down && ip link set eth0 master bond0 + ip link set eth1 down && ip link set eth1 master bond0 + ip -d link show dev swp0 + (...) + dsa master bond0 + +Notice that in the case of CPU ports under a LAG, the use of the +``IFLA_DSA_MASTER`` netlink attribute is not strictly needed, but rather, DSA +reacts to the ``IFLA_MASTER`` attribute change of its present master (``eth0``) +and migrates all user ports to the new upper of ``eth0``, ``bond0``. Similarly, +when ``bond0`` is destroyed using ``RTM_DELLINK``, DSA migrates the user ports +that were assigned to this interface to the first physical DSA master which is +eligible, based on the firmware description (it effectively reverts to the +startup configuration). + +In a setup with more than 2 physical CPU ports, it is therefore possible to mix +static user to CPU port assignment with LAG between DSA masters. It is not +possible to statically assign a user port towards a DSA master that has any +upper interfaces (this includes LAG devices - the master must always be the LAG +in this case). + +Live changing of the DSA master (and thus CPU port) affinity of a user port is +permitted, in order to allow dynamic redistribution in response to traffic. + +Physical DSA masters are allowed to join and leave at any time a LAG interface +used as a DSA master; however, DSA will reject a LAG interface as a valid +candidate for being a DSA master unless it has at least one physical DSA master +as a slave device. diff --git a/Documentation/networking/dsa/dsa.rst b/Documentation/networking/dsa/dsa.rst index d742ba6bd211..a94ddf83348a 100644 --- a/Documentation/networking/dsa/dsa.rst +++ b/Documentation/networking/dsa/dsa.rst @@ -303,6 +303,20 @@ These frames are then queued for transmission using the master network device Ethernet switch will be able to process these incoming frames from the management interface and deliver them to the physical switch port. +When using multiple CPU ports, it is possible to stack a LAG (bonding/team) +device between the DSA slave devices and the physical DSA masters. The LAG +device is thus also a DSA master, but the LAG slave devices continue to be DSA +masters as well (just with no user port assigned to them; this is needed for +recovery in case the LAG DSA master disappears). Thus, the data path of the LAG +DSA master is used asymmetrically. On RX, the ``ETH_P_XDSA`` handler, which +calls ``dsa_switch_rcv()``, is invoked early (on the physical DSA master; +LAG slave). Therefore, the RX data path of the LAG DSA master is not used. +On the other hand, TX takes place linearly: ``dsa_slave_xmit`` calls +``dsa_enqueue_skb``, which calls ``dev_queue_xmit`` towards the LAG DSA master. +The latter calls ``dev_queue_xmit`` towards one physical DSA master or the +other, and in both cases, the packet exits the system through a hardware path +towards the switch. + Graphical representation ------------------------ @@ -629,6 +643,24 @@ Switch configuration PHY cannot be found. In this case, probing of the DSA switch continues without that particular port. +- ``port_change_master``: method through which the affinity (association used + for traffic termination purposes) between a user port and a CPU port can be + changed. By default all user ports from a tree are assigned to the first + available CPU port that makes sense for them (most of the times this means + the user ports of a tree are all assigned to the same CPU port, except for H + topologies as described in commit 2c0b03258b8b). The ``port`` argument + represents the index of the user port, and the ``master`` argument represents + the new DSA master ``net_device``. The CPU port associated with the new + master can be retrieved by looking at ``struct dsa_port *cpu_dp = + master->dsa_ptr``. Additionally, the master can also be a LAG device where + all the slave devices are physical DSA masters. LAG DSA masters also have a + valid ``master->dsa_ptr`` pointer, however this is not unique, but rather a + duplicate of the first physical DSA master's (LAG slave) ``dsa_ptr``. In case + of a LAG DSA master, a further call to ``port_lag_join`` will be emitted + separately for the physical CPU ports associated with the physical DSA + masters, requesting them to create a hardware LAG associated with the LAG + interface. + PHY devices and link management ------------------------------- @@ -1095,9 +1127,3 @@ capable hardware, but does not enforce a strict switch device driver model. On the other DSA enforces a fairly strict device driver model, and deals with most of the switch specific. At some point we should envision a merger between these two subsystems and get the best of both worlds. - -Other hanging fruits --------------------- - -- allowing more than one CPU/management interface: - http://comments.gmane.org/gmane.linux.network/365657 diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst index dbca3e9ec782..d578b8bcd8a4 100644 --- a/Documentation/networking/ethtool-netlink.rst +++ b/Documentation/networking/ethtool-netlink.rst @@ -220,6 +220,8 @@ Userspace to kernel: ``ETHTOOL_MSG_PHC_VCLOCKS_GET`` get PHC virtual clocks info ``ETHTOOL_MSG_MODULE_SET`` set transceiver module parameters ``ETHTOOL_MSG_MODULE_GET`` get transceiver module parameters + ``ETHTOOL_MSG_PSE_SET`` set PSE parameters + ``ETHTOOL_MSG_PSE_GET`` get PSE parameters ===================================== ================================= Kernel to userspace: @@ -260,6 +262,7 @@ Kernel to userspace: ``ETHTOOL_MSG_STATS_GET_REPLY`` standard statistics ``ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY`` PHC virtual clocks info ``ETHTOOL_MSG_MODULE_GET_REPLY`` transceiver module parameters + ``ETHTOOL_MSG_PSE_GET_REPLY`` PSE parameters ======================================== ================================= ``GET`` requests are sent by userspace applications to retrieve device @@ -426,6 +429,7 @@ Kernel response contents: ``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG`` u8 Master/slave port mode ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_STATE`` u8 Master/slave port state + ``ETHTOOL_A_LINKMODES_RATE_MATCHING`` u8 PHY rate matching ========================================== ====== ========================== For ``ETHTOOL_A_LINKMODES_OURS``, value represents advertised modes and mask @@ -449,6 +453,7 @@ Request contents: ``ETHTOOL_A_LINKMODES_SPEED`` u32 link speed (Mb/s) ``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG`` u8 Master/slave port mode + ``ETHTOOL_A_LINKMODES_RATE_MATCHING`` u8 PHY rate matching ``ETHTOOL_A_LINKMODES_LANES`` u32 lanes ========================================== ====== ========================== @@ -1625,6 +1630,62 @@ For SFF-8636 modules, low power mode is forced by the host according to table For CMIS modules, low power mode is forced by the host according to table 6-12 in revision 5.0 of the specification. +PSE_GET +======= + +Gets PSE attributes. + +Request contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_PSE_HEADER`` nested request header + ===================================== ====== ========================== + +Kernel response contents: + + ====================================== ====== ============================= + ``ETHTOOL_A_PSE_HEADER`` nested reply header + ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` u32 Operational state of the PoDL + PSE functions + ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` u32 power detection status of the + PoDL PSE. + ====================================== ====== ============================= + +When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies +the operational state of the PoDL PSE functions. The operational state of the +PSE function can be changed using the ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` +action. This option is corresponding to ``IEEE 802.3-2018`` 30.15.1.1.2 +aPoDLPSEAdminState. Possible values are: + +.. kernel-doc:: include/uapi/linux/ethtool.h + :identifiers: ethtool_podl_pse_admin_state + +When set, the optional ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` attribute identifies +the power detection status of the PoDL PSE. The status depend on internal PSE +state machine and automatic PD classification support. This option is +corresponding to ``IEEE 802.3-2018`` 30.15.1.1.3 aPoDLPSEPowerDetectionStatus. +Possible values are: + +.. kernel-doc:: include/uapi/linux/ethtool.h + :identifiers: ethtool_podl_pse_pw_d_status + +PSE_SET +======= + +Sets PSE parameters. + +Request contents: + + ====================================== ====== ============================= + ``ETHTOOL_A_PSE_HEADER`` nested request header + ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` u32 Control PoDL PSE Admin state + ====================================== ====== ============================= + +When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` attribute is used +to control PoDL PSE Admin functions. This option is implementing +``IEEE 802.3-2018`` 30.15.1.2.1 acPoDLPSEAdminControl. See +``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` for supported values. + Request translation =================== diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst index 03b215bddde8..16a153bcc5fe 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -47,7 +47,6 @@ Contents: cdc_mbim dccp dctcp - decnet dns_resolver driver eql @@ -93,6 +92,7 @@ Contents: radiotap-headers rds regulatory + representors rxrpc sctp secid diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index 56cd4ea059b2..e7b3fa7bb3f7 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -1035,7 +1035,39 @@ tcp_limit_output_bytes - INTEGER tcp_challenge_ack_limit - INTEGER Limits number of Challenge ACK sent per second, as recommended in RFC 5961 (Improving TCP's Robustness to Blind In-Window Attacks) - Default: 1000 + Note that this per netns rate limit can allow some side channel + attacks and probably should not be enabled. + TCP stack implements per TCP socket limits anyway. + Default: INT_MAX (unlimited) + +tcp_ehash_entries - INTEGER + Show the number of hash buckets for TCP sockets in the current + networking namespace. + + A negative value means the networking namespace does not own its + hash buckets and shares the initial networking namespace's one. + +tcp_child_ehash_entries - INTEGER + Control the number of hash buckets for TCP sockets in the child + networking namespace, which must be set before clone() or unshare(). + + If the value is not 0, the kernel uses a value rounded up to 2^n + as the actual hash bucket size. 0 is a special value, meaning + the child networking namespace will share the initial networking + namespace's hash buckets. + + Note that the child will use the global one in case the kernel + fails to allocate enough memory. In addition, the global hash + buckets are spread over available NUMA nodes, but the allocation + of the child hash table depends on the current process's NUMA + policy, which could result in performance differences. + + Note also that the default value of tcp_max_tw_buckets and + tcp_max_syn_backlog depend on the hash bucket size. + + Possible values: 0, 2^n (n: 0 - 24 (16Mi)) + + Default: 0 UDP variables ============= diff --git a/Documentation/networking/ipvlan.rst b/Documentation/networking/ipvlan.rst index 694adcba36b0..0000c1d383bc 100644 --- a/Documentation/networking/ipvlan.rst +++ b/Documentation/networking/ipvlan.rst @@ -11,7 +11,7 @@ Initial Release: ================ This is conceptually very similar to the macvlan driver with one major exception of using L3 for mux-ing /demux-ing among slaves. This property makes -the master device share the L2 with it's slave devices. I have developed this +the master device share the L2 with its slave devices. I have developed this driver in conjunction with network namespaces and not sure if there is use case outside of it. diff --git a/Documentation/networking/l2tp.rst b/Documentation/networking/l2tp.rst index 498b382d25a0..7f383e99dbad 100644 --- a/Documentation/networking/l2tp.rst +++ b/Documentation/networking/l2tp.rst @@ -530,7 +530,7 @@ its tunnel close actions. For L2TPIP sockets, the socket's close handler initiates the same tunnel close actions. All sessions are first closed. Each session drops its tunnel ref. When the tunnel ref reaches zero, the tunnel puts its socket ref. When the socket is -eventually destroyed, it's sk_destruct finally frees the L2TP tunnel +eventually destroyed, its sk_destruct finally frees the L2TP tunnel context. Sessions diff --git a/Documentation/networking/mptcp-sysctl.rst b/Documentation/networking/mptcp-sysctl.rst index e263dfcc4b40..213510698014 100644 --- a/Documentation/networking/mptcp-sysctl.rst +++ b/Documentation/networking/mptcp-sysctl.rst @@ -47,7 +47,6 @@ allow_join_initial_addr_port - BOOLEAN Default: 1 pm_type - INTEGER - Set the default path manager type to use for each new MPTCP socket. In-kernel path management will control subflow connections and address advertisements according to diff --git a/Documentation/networking/nf_conntrack-sysctl.rst b/Documentation/networking/nf_conntrack-sysctl.rst index 834945ebc4cd..1120d71f28d7 100644 --- a/Documentation/networking/nf_conntrack-sysctl.rst +++ b/Documentation/networking/nf_conntrack-sysctl.rst @@ -70,15 +70,6 @@ nf_conntrack_generic_timeout - INTEGER (seconds) Default for generic timeout. This refers to layer 4 unknown/unsupported protocols. -nf_conntrack_helper - BOOLEAN - - 0 - disabled (default) - - not 0 - enabled - - Enable automatic conntrack helper assignment. - If disabled it is required to set up iptables rules to assign - helpers to connections. See the CT target description in the - iptables-extensions(8) man page for further information. - nf_conntrack_icmp_timeout - INTEGER (seconds) default 30 diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst index 704f31da5167..06f4fcdb58b6 100644 --- a/Documentation/networking/phy.rst +++ b/Documentation/networking/phy.rst @@ -308,6 +308,21 @@ Some of the interface modes are described below: rate of 125Mpbs using a 4B/5B encoding scheme, resulting in an underlying data rate of 100Mpbs. +``PHY_INTERFACE_MODE_QUSGMII`` + This defines the Cisco the Quad USGMII mode, which is the Quad variant of + the USGMII (Universal SGMII) link. It's very similar to QSGMII, but uses + a Packet Control Header (PCH) instead of the 7 bytes preamble to carry not + only the port id, but also so-called "extensions". The only documented + extension so-far in the specification is the inclusion of timestamps, for + PTP-enabled PHYs. This mode isn't compatible with QSGMII, but offers the + same capabilities in terms of link speed and negociation. + +``PHY_INTERFACE_MODE_1000BASEKX`` + This is 1000BASE-X as defined by IEEE 802.3 Clause 36 with Clause 73 + autonegotiation. Generally, it will be used with a Clause 70 PMD. To + contrast with the 1000BASE-X phy mode used for Clause 38 and 39 PMDs, this + interface mode has different autonegotiation and only supports full duplex. + Pause frames / flow control =========================== diff --git a/Documentation/networking/representors.rst b/Documentation/networking/representors.rst new file mode 100644 index 000000000000..ee1f5cd54496 --- /dev/null +++ b/Documentation/networking/representors.rst @@ -0,0 +1,259 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================= +Network Function Representors +============================= + +This document describes the semantics and usage of representor netdevices, as +used to control internal switching on SmartNICs. For the closely-related port +representors on physical (multi-port) switches, see +:ref:`Documentation/networking/switchdev.rst <switchdev>`. + +Motivation +---------- + +Since the mid-2010s, network cards have started offering more complex +virtualisation capabilities than the legacy SR-IOV approach (with its simple +MAC/VLAN-based switching model) can support. This led to a desire to offload +software-defined networks (such as OpenVSwitch) to these NICs to specify the +network connectivity of each function. The resulting designs are variously +called SmartNICs or DPUs. + +Network function representors bring the standard Linux networking stack to +virtual switches and IOV devices. Just as each physical port of a Linux- +controlled switch has a separate netdev, so does each virtual port of a virtual +switch. +When the system boots, and before any offload is configured, all packets from +the virtual functions appear in the networking stack of the PF via the +representors. The PF can thus always communicate freely with the virtual +functions. +The PF can configure standard Linux forwarding between representors, the uplink +or any other netdev (routing, bridging, TC classifiers). + +Thus, a representor is both a control plane object (representing the function in +administrative commands) and a data plane object (one end of a virtual pipe). +As a virtual link endpoint, the representor can be configured like any other +netdevice; in some cases (e.g. link state) the representee will follow the +representor's configuration, while in others there are separate APIs to +configure the representee. + +Definitions +----------- + +This document uses the term "switchdev function" to refer to the PCIe function +which has administrative control over the virtual switch on the device. +Typically, this will be a PF, but conceivably a NIC could be configured to grant +these administrative privileges instead to a VF or SF (subfunction). +Depending on NIC design, a multi-port NIC might have a single switchdev function +for the whole device or might have a separate virtual switch, and hence +switchdev function, for each physical network port. +If the NIC supports nested switching, there might be separate switchdev +functions for each nested switch, in which case each switchdev function should +only create representors for the ports on the (sub-)switch it directly +administers. + +A "representee" is the object that a representor represents. So for example in +the case of a VF representor, the representee is the corresponding VF. + +What does a representor do? +--------------------------- + +A representor has three main roles. + +1. It is used to configure the network connection the representee sees, e.g. + link up/down, MTU, etc. For instance, bringing the representor + administratively UP should cause the representee to see a link up / carrier + on event. +2. It provides the slow path for traffic which does not hit any offloaded + fast-path rules in the virtual switch. Packets transmitted on the + representor netdevice should be delivered to the representee; packets + transmitted by the representee which fail to match any switching rule should + be received on the representor netdevice. (That is, there is a virtual pipe + connecting the representor to the representee, similar in concept to a veth + pair.) + This allows software switch implementations (such as OpenVSwitch or a Linux + bridge) to forward packets between representees and the rest of the network. +3. It acts as a handle by which switching rules (such as TC filters) can refer + to the representee, allowing these rules to be offloaded. + +The combination of 2) and 3) means that the behaviour (apart from performance) +should be the same whether a TC filter is offloaded or not. E.g. a TC rule +on a VF representor applies in software to packets received on that representor +netdevice, while in hardware offload it would apply to packets transmitted by +the representee VF. Conversely, a mirred egress redirect to a VF representor +corresponds in hardware to delivery directly to the representee VF. + +What functions should have a representor? +----------------------------------------- + +Essentially, for each virtual port on the device's internal switch, there +should be a representor. +Some vendors have chosen to omit representors for the uplink and the physical +network port, which can simplify usage (the uplink netdev becomes in effect the +physical port's representor) but does not generalise to devices with multiple +ports or uplinks. + +Thus, the following should all have representors: + + - VFs belonging to the switchdev function. + - Other PFs on the local PCIe controller, and any VFs belonging to them. + - PFs and VFs on external PCIe controllers on the device (e.g. for any embedded + System-on-Chip within the SmartNIC). + - PFs and VFs with other personalities, including network block devices (such + as a vDPA virtio-blk PF backed by remote/distributed storage), if (and only + if) their network access is implemented through a virtual switch port. [#]_ + Note that such functions can require a representor despite the representee + not having a netdev. + - Subfunctions (SFs) belonging to any of the above PFs or VFs, if they have + their own port on the switch (as opposed to using their parent PF's port). + - Any accelerators or plugins on the device whose interface to the network is + through a virtual switch port, even if they do not have a corresponding PCIe + PF or VF. + +This allows the entire switching behaviour of the NIC to be controlled through +representor TC rules. + +It is a common misunderstanding to conflate virtual ports with PCIe virtual +functions or their netdevs. While in simple cases there will be a 1:1 +correspondence between VF netdevices and VF representors, more advanced device +configurations may not follow this. +A PCIe function which does not have network access through the internal switch +(not even indirectly through the hardware implementation of whatever services +the function provides) should *not* have a representor (even if it has a +netdev). +Such a function has no switch virtual port for the representor to configure or +to be the other end of the virtual pipe. +The representor represents the virtual port, not the PCIe function nor the 'end +user' netdevice. + +.. [#] The concept here is that a hardware IP stack in the device performs the + translation between block DMA requests and network packets, so that only + network packets pass through the virtual port onto the switch. The network + access that the IP stack "sees" would then be configurable through tc rules; + e.g. its traffic might all be wrapped in a specific VLAN or VxLAN. However, + any needed configuration of the block device *qua* block device, not being a + networking entity, would not be appropriate for the representor and would + thus use some other channel such as devlink. + Contrast this with the case of a virtio-blk implementation which forwards the + DMA requests unchanged to another PF whose driver then initiates and + terminates IP traffic in software; in that case the DMA traffic would *not* + run over the virtual switch and the virtio-blk PF should thus *not* have a + representor. + +How are representors created? +----------------------------- + +The driver instance attached to the switchdev function should, for each virtual +port on the switch, create a pure-software netdevice which has some form of +in-kernel reference to the switchdev function's own netdevice or driver private +data (``netdev_priv()``). +This may be by enumerating ports at probe time, reacting dynamically to the +creation and destruction of ports at run time, or a combination of the two. + +The operations of the representor netdevice will generally involve acting +through the switchdev function. For example, ``ndo_start_xmit()`` might send +the packet through a hardware TX queue attached to the switchdev function, with +either packet metadata or queue configuration marking it for delivery to the +representee. + +How are representors identified? +-------------------------------- + +The representor netdevice should *not* directly refer to a PCIe device (e.g. +through ``net_dev->dev.parent`` / ``SET_NETDEV_DEV()``), either of the +representee or of the switchdev function. +Instead, it should implement the ``ndo_get_devlink_port()`` netdevice op, which +the kernel uses to provide the ``phys_switch_id`` and ``phys_port_name`` sysfs +nodes. (Some legacy drivers implement ``ndo_get_port_parent_id()`` and +``ndo_get_phys_port_name()`` directly, but this is deprecated.) See +:ref:`Documentation/networking/devlink/devlink-port.rst <devlink_port>` for the +details of this API. + +It is expected that userland will use this information (e.g. through udev rules) +to construct an appropriately informative name or alias for the netdevice. For +instance if the switchdev function is ``eth4`` then a representor with a +``phys_port_name`` of ``p0pf1vf2`` might be renamed ``eth4pf1vf2rep``. + +There are as yet no established conventions for naming representors which do not +correspond to PCIe functions (e.g. accelerators and plugins). + +How do representors interact with TC rules? +------------------------------------------- + +Any TC rule on a representor applies (in software TC) to packets received by +that representor netdevice. Thus, if the delivery part of the rule corresponds +to another port on the virtual switch, the driver may choose to offload it to +hardware, applying it to packets transmitted by the representee. + +Similarly, since a TC mirred egress action targeting the representor would (in +software) send the packet through the representor (and thus indirectly deliver +it to the representee), hardware offload should interpret this as delivery to +the representee. + +As a simple example, if ``PORT_DEV`` is the physical port representor and +``REP_DEV`` is a VF representor, the following rules:: + + tc filter add dev $REP_DEV parent ffff: protocol ipv4 flower \ + action mirred egress redirect dev $PORT_DEV + tc filter add dev $PORT_DEV parent ffff: protocol ipv4 flower skip_sw \ + action mirred egress mirror dev $REP_DEV + +would mean that all IPv4 packets from the VF are sent out the physical port, and +all IPv4 packets received on the physical port are delivered to the VF in +addition to ``PORT_DEV``. (Note that without ``skip_sw`` on the second rule, +the VF would get two copies, as the packet reception on ``PORT_DEV`` would +trigger the TC rule again and mirror the packet to ``REP_DEV``.) + +On devices without separate port and uplink representors, ``PORT_DEV`` would +instead be the switchdev function's own uplink netdevice. + +Of course the rules can (if supported by the NIC) include packet-modifying +actions (e.g. VLAN push/pop), which should be performed by the virtual switch. + +Tunnel encapsulation and decapsulation are rather more complicated, as they +involve a third netdevice (a tunnel netdev operating in metadata mode, such as +a VxLAN device created with ``ip link add vxlan0 type vxlan external``) and +require an IP address to be bound to the underlay device (e.g. switchdev +function uplink netdev or port representor). TC rules such as:: + + tc filter add dev $REP_DEV parent ffff: flower \ + action tunnel_key set id $VNI src_ip $LOCAL_IP dst_ip $REMOTE_IP \ + dst_port 4789 \ + action mirred egress redirect dev vxlan0 + tc filter add dev vxlan0 parent ffff: flower enc_src_ip $REMOTE_IP \ + enc_dst_ip $LOCAL_IP enc_key_id $VNI enc_dst_port 4789 \ + action tunnel_key unset action mirred egress redirect dev $REP_DEV + +where ``LOCAL_IP`` is an IP address bound to ``PORT_DEV``, and ``REMOTE_IP`` is +another IP address on the same subnet, mean that packets sent by the VF should +be VxLAN encapsulated and sent out the physical port (the driver has to deduce +this by a route lookup of ``LOCAL_IP`` leading to ``PORT_DEV``, and also +perform an ARP/neighbour table lookup to find the MAC addresses to use in the +outer Ethernet frame), while UDP packets received on the physical port with UDP +port 4789 should be parsed as VxLAN and, if their VSID matches ``$VNI``, +decapsulated and forwarded to the VF. + +If this all seems complicated, just remember the 'golden rule' of TC offload: +the hardware should ensure the same final results as if the packets were +processed through the slow path, traversed software TC (except ignoring any +``skip_hw`` rules and applying any ``skip_sw`` rules) and were transmitted or +received through the representor netdevices. + +Configuring the representee's MAC +--------------------------------- + +The representee's link state is controlled through the representor. Setting the +representor administratively UP or DOWN should cause carrier ON or OFF at the +representee. + +Setting an MTU on the representor should cause that same MTU to be reported to +the representee. +(On hardware that allows configuring separate and distinct MTU and MRU values, +the representor MTU should correspond to the representee's MRU and vice-versa.) + +Currently there is no way to use the representor to set the station permanent +MAC address of the representee; other methods available to do this include: + + - legacy SR-IOV (``ip link set DEVICE vf NUM mac LLADDR``) + - devlink port function (see **devlink-port(8)** and + :ref:`Documentation/networking/devlink/devlink-port.rst <devlink_port>`) diff --git a/Documentation/networking/rxrpc.rst b/Documentation/networking/rxrpc.rst index 39c2249c7aa7..39494a6ea739 100644 --- a/Documentation/networking/rxrpc.rst +++ b/Documentation/networking/rxrpc.rst @@ -1055,17 +1055,6 @@ The kernel interface functions are as follows: first function to change. Note that this must be called in TASK_RUNNING state. - (#) Get reply timestamp:: - - bool rxrpc_kernel_get_reply_time(struct socket *sock, - struct rxrpc_call *call, - ktime_t *_ts) - - This allows the timestamp on the first DATA packet of the reply of a - client call to be queried, provided that it is still in the Rx ring. If - successful, the timestamp will be stored into ``*_ts`` and true will be - returned; false will be returned otherwise. - (#) Get remote client epoch:: u32 rxrpc_kernel_get_epoch(struct socket *sock, diff --git a/Documentation/networking/smc-sysctl.rst b/Documentation/networking/smc-sysctl.rst index 742e90e6d822..6d8acdbe9be1 100644 --- a/Documentation/networking/smc-sysctl.rst +++ b/Documentation/networking/smc-sysctl.rst @@ -34,3 +34,28 @@ smcr_buf_type - INTEGER - 1 - Use virtually contiguous buffers - 2 - Mixed use of the two types. Try physically contiguous buffers first. If not available, use virtually contiguous buffers then. + +smcr_testlink_time - INTEGER + How frequently SMC-R link sends out TEST_LINK LLC messages to confirm + viability, after the last activity of connections on it. Value 0 means + disabling TEST_LINK. + + Default: 30 seconds. + +wmem - INTEGER + Initial size of send buffer used by SMC sockets. + The default value inherits from net.ipv4.tcp_wmem[1]. + + The minimum value is 16KiB and there is no hard limit for max value, but + only allowed 512KiB for SMC-R and 1MiB for SMC-D. + + Default: 16K + +rmem - INTEGER + Initial size of receive buffer (RMB) used by SMC sockets. + The default value inherits from net.ipv4.tcp_rmem[1]. + + The minimum value is 16KiB and there is no hard limit for max value, but + only allowed 512KiB for SMC-R and 1MiB for SMC-D. + + Default: 128K diff --git a/Documentation/networking/switchdev.rst b/Documentation/networking/switchdev.rst index f1f4e6a85a29..758f1dae3fce 100644 --- a/Documentation/networking/switchdev.rst +++ b/Documentation/networking/switchdev.rst @@ -1,5 +1,6 @@ .. SPDX-License-Identifier: GPL-2.0 .. include:: <isonum.txt> +.. _switchdev: =============================================== Ethernet switch device driver model (switchdev) @@ -159,7 +160,7 @@ tools such as iproute2. The switchdev driver can know a particular port's position in the topology by monitoring NETDEV_CHANGEUPPER notifications. For example, a port moved into a -bond will see it's upper master change. If that bond is moved into a bridge, +bond will see its upper master change. If that bond is moved into a bridge, the bond's upper master will change. And so on. The driver will track such movements to know what position a port is in in the overall topology by registering for netdevice events and acting on NETDEV_CHANGEUPPER. diff --git a/Documentation/process/5.Posting.rst b/Documentation/process/5.Posting.rst index 906235c11c24..d87f1fee4cbc 100644 --- a/Documentation/process/5.Posting.rst +++ b/Documentation/process/5.Posting.rst @@ -256,8 +256,10 @@ The tags in common use are: - Cc: the named person received a copy of the patch and had the opportunity to comment on it. -Be careful in the addition of tags to your patches: only Cc: is appropriate -for addition without the explicit permission of the person named. +Be careful in the addition of tags to your patches, as only Cc: is appropriate +for addition without the explicit permission of the person named; using +Reported-by: is fine most of the time as well, but ask for permission if +the bug was reported in private. Sending the patch diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst index 19c286c23786..9a90197989dd 100644 --- a/Documentation/process/changes.rst +++ b/Documentation/process/changes.rst @@ -31,6 +31,8 @@ you probably needn't concern yourself with pcmciautils. ====================== =============== ======================================== GNU C 5.1 gcc --version Clang/LLVM (optional) 11.0.0 clang --version +Rust (optional) 1.62.0 rustc --version +bindgen (optional) 0.56.0 bindgen --version GNU make 3.81 make --version bash 4.2 bash --version binutils 2.23 ld -v @@ -80,6 +82,29 @@ kernels. Older releases aren't guaranteed to work, and we may drop workarounds from the kernel that were used to support older versions. Please see additional docs on :ref:`Building Linux with Clang/LLVM <kbuild_llvm>`. +Rust (optional) +--------------- + +A particular version of the Rust toolchain is required. Newer versions may or +may not work because the kernel depends on some unstable Rust features, for +the moment. + +Each Rust toolchain comes with several "components", some of which are required +(like ``rustc``) and some that are optional. The ``rust-src`` component (which +is optional) needs to be installed to build the kernel. Other components are +useful for developing. + +Please see Documentation/rust/quick-start.rst for instructions on how to +satisfy the build requirements of Rust support. In particular, the ``Makefile`` +target ``rustavailable`` is useful to check why the Rust toolchain may not +be detected. + +bindgen (optional) +------------------ + +``bindgen`` is used to generate the Rust bindings to the C side of the kernel. +It depends on ``libclang``. + Make ---- @@ -348,6 +373,12 @@ Sphinx Please see :ref:`sphinx_install` in :ref:`Documentation/doc-guide/sphinx.rst <sphinxdoc>` for details about Sphinx requirements. +rustdoc +------- + +``rustdoc`` is used to generate the documentation for Rust code. Please see +Documentation/rust/general-information.rst for more information. + Getting updated software ======================== @@ -364,6 +395,16 @@ Clang/LLVM - :ref:`Getting LLVM <getting_llvm>`. +Rust +---- + +- Documentation/rust/quick-start.rst. + +bindgen +------- + +- Documentation/rust/quick-start.rst. + Make ---- diff --git a/Documentation/process/code-of-conduct-interpretation.rst b/Documentation/process/code-of-conduct-interpretation.rst index e899f14a4ba2..922e0b547bc3 100644 --- a/Documentation/process/code-of-conduct-interpretation.rst +++ b/Documentation/process/code-of-conduct-interpretation.rst @@ -51,7 +51,7 @@ the Technical Advisory Board (TAB) or other maintainers if you're uncertain how to handle situations that come up. It will not be considered a violation report unless you want it to be. If you are uncertain about approaching the TAB or any other maintainers, please -reach out to our conflict mediator, Mishi Choudhary <mishi@linux.com>. +reach out to our conflict mediator, Joanna Lee <joanna.lee@gesmer.com>. In the end, "be kind to each other" is really what the end goal is for everybody. We know everyone is human and we all fail at times, but the @@ -127,10 +127,12 @@ are listed at https://kernel.org/code-of-conduct.html. Members can not access reports made before they joined or after they have left the committee. -The initial Code of Conduct Committee consists of volunteer members of -the TAB, as well as a professional mediator acting as a neutral third -party. The first task of the committee is to establish documented -processes, which will be made public. +The Code of Conduct Committee consists of volunteer community members +appointed by the TAB, as well as a professional mediator acting as a +neutral third party. The processes the Code of Conduct committee will +use to address reports is varied and will depend on the individual +circumstance, however, this file serves as documentation for the +general process used. Any member of the committee, including the mediator, can be contacted directly if a reporter does not wish to include the full committee in a @@ -141,16 +143,16 @@ processes (see above) and consults with the TAB as needed and appropriate, for instance to request and receive information about the kernel community. -Any decisions by the committee will be brought to the TAB, for -implementation of enforcement with the relevant maintainers if needed. -A decision by the Code of Conduct Committee can be overturned by the TAB -by a two-thirds vote. +Any decisions regarding enforcement recommendations will be brought to +the TAB for implementation of enforcement with the relevant maintainers +if needed. A decision by the Code of Conduct Committee can be overturned +by the TAB by a two-thirds vote. At quarterly intervals, the Code of Conduct Committee and TAB will provide a report summarizing the anonymised reports that the Code of Conduct committee has received and their status, as well details of any overridden decisions including complete and identifiable voting details. -We expect to establish a different process for Code of Conduct Committee -staffing beyond the bootstrap period. This document will be updated -with that information when this occurs. +Because how we interpret and enforce the Code of Conduct will evolve over +time, this document will be updated when necessary to reflect any +changes. diff --git a/Documentation/process/coding-style.rst b/Documentation/process/coding-style.rst index 03eb53fd029a..007e49ef6cec 100644 --- a/Documentation/process/coding-style.rst +++ b/Documentation/process/coding-style.rst @@ -1186,6 +1186,68 @@ expression used. For instance: #endif /* CONFIG_SOMETHING */ +22) Do not crash the kernel +--------------------------- + +In general, the decision to crash the kernel belongs to the user, rather +than to the kernel developer. + +Avoid panic() +************* + +panic() should be used with care and primarily only during system boot. +panic() is, for example, acceptable when running out of memory during boot and +not being able to continue. + +Use WARN() rather than BUG() +**************************** + +Do not add new code that uses any of the BUG() variants, such as BUG(), +BUG_ON(), or VM_BUG_ON(). Instead, use a WARN*() variant, preferably +WARN_ON_ONCE(), and possibly with recovery code. Recovery code is not +required if there is no reasonable way to at least partially recover. + +"I'm too lazy to do error handling" is not an excuse for using BUG(). Major +internal corruptions with no way of continuing may still use BUG(), but need +good justification. + +Use WARN_ON_ONCE() rather than WARN() or WARN_ON() +************************************************** + +WARN_ON_ONCE() is generally preferred over WARN() or WARN_ON(), because it +is common for a given warning condition, if it occurs at all, to occur +multiple times. This can fill up and wrap the kernel log, and can even slow +the system enough that the excessive logging turns into its own, additional +problem. + +Do not WARN lightly +******************* + +WARN*() is intended for unexpected, this-should-never-happen situations. +WARN*() macros are not to be used for anything that is expected to happen +during normal operation. These are not pre- or post-condition asserts, for +example. Again: WARN*() must not be used for a condition that is expected +to trigger easily, for example, by user space actions. pr_warn_once() is a +possible alternative, if you need to notify the user of a problem. + +Do not worry about panic_on_warn users +************************************** + +A few more words about panic_on_warn: Remember that ``panic_on_warn`` is an +available kernel option, and that many users set this option. This is why +there is a "Do not WARN lightly" writeup, above. However, the existence of +panic_on_warn users is not a valid reason to avoid the judicious use +WARN*(). That is because, whoever enables panic_on_warn has explicitly +asked the kernel to crash if a WARN*() fires, and such users must be +prepared to deal with the consequences of a system that is somewhat more +likely to crash. + +Use BUILD_BUG_ON() for compile-time assertions +********************************************** + +The use of BUILD_BUG_ON() is acceptable and encouraged, because it is a +compile-time assertion that has no effect at runtime. + Appendix I) References ---------------------- diff --git a/Documentation/process/deprecated.rst b/Documentation/process/deprecated.rst index a6e36d9c3d14..c8fd53a11a20 100644 --- a/Documentation/process/deprecated.rst +++ b/Documentation/process/deprecated.rst @@ -138,17 +138,20 @@ be NUL terminated. This can lead to various linear read overflows and other misbehavior due to the missing termination. It also NUL-pads the destination buffer if the source contents are shorter than the destination buffer size, which may be a needless performance penalty -for callers using only NUL-terminated strings. The safe replacement is +for callers using only NUL-terminated strings. + +When the destination is required to be NUL-terminated, the replacement is strscpy(), though care must be given to any cases where the return value of strncpy() was used, since strscpy() does not return a pointer to the destination, but rather a count of non-NUL bytes copied (or negative errno when it truncates). Any cases still needing NUL-padding should instead use strscpy_pad(). -If a caller is using non-NUL-terminated strings, strncpy() can -still be used, but destinations should be marked with the `__nonstring +If a caller is using non-NUL-terminated strings, strtomem() should be +used, and the destinations should be marked with the `__nonstring <https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html>`_ -attribute to avoid future compiler warnings. +attribute to avoid future compiler warnings. For cases still needing +NUL-padding, strtomem_pad() can be used. strlcpy() --------- diff --git a/Documentation/process/index.rst b/Documentation/process/index.rst index 2ba2a1582bbe..d4b6217472b0 100644 --- a/Documentation/process/index.rst +++ b/Documentation/process/index.rst @@ -5,6 +5,7 @@ .. _process_index: +============================================= Working with the kernel development community ============================================= diff --git a/Documentation/process/maintainer-pgp-guide.rst b/Documentation/process/maintainer-pgp-guide.rst index 29e7d7b1cd44..40bfbd3b7648 100644 --- a/Documentation/process/maintainer-pgp-guide.rst +++ b/Documentation/process/maintainer-pgp-guide.rst @@ -121,57 +121,56 @@ edit your ``~/.gnupg/gpg-agent.conf`` file to set your own values:: to remove anything you had in place for older versions of GnuPG, as it may not be doing the right thing any more. -Set up a refresh cronjob -~~~~~~~~~~~~~~~~~~~~~~~~ - -You will need to regularly refresh your keyring in order to get the -latest changes on other people's public keys, which is best done with a -daily cronjob:: - - @daily /usr/bin/gpg2 --refresh >/dev/null 2>&1 - -Check the full path to your ``gpg`` or ``gpg2`` command and use the -``gpg2`` command if regular ``gpg`` for you is the legacy GnuPG v.1. - -.. _master_key: +.. _protect_your_key: -Protect your master PGP key -=========================== +Protect your PGP key +==================== This guide assumes that you already have a PGP key that you use for Linux kernel development purposes. If you do not yet have one, please see the "`Protecting Code Integrity`_" document mentioned earlier for guidance on how to create a new one. -You should also make a new key if your current one is weaker than 2048 bits -(RSA). - -Master key vs. Subkeys ----------------------- - -Subkeys are fully independent PGP keypairs that are tied to the "master" -key using certifying key signatures (certificates). It is important to -understand the following: - -1. There are no technical differences between the "master key" and "subkeys." -2. At creation time, we assign functional limitations to each key by - giving it specific capabilities. -3. A PGP key can have 4 capabilities: - - - **[S]** key can be used for signing - - **[E]** key can be used for encryption - - **[A]** key can be used for authentication - - **[C]** key can be used for certifying other keys - -4. A single key may have multiple capabilities. -5. A subkey is fully independent from the master key. A message - encrypted to a subkey cannot be decrypted with the master key. If you - lose your private subkey, it cannot be recreated from the master key - in any way. - -The key carrying the **[C]** (certify) capability is considered the -"master" key because it is the only key that can be used to indicate -relationship with other keys. Only the **[C]** key can be used to: +You should also make a new key if your current one is weaker than 2048 +bits (RSA). + +Understanding PGP Subkeys +------------------------- + +A PGP key rarely consists of a single keypair -- usually it is a +collection of independent subkeys that can be used for different +purposes based on their capabilities, assigned at their creation time. +PGP defines four capabilities that a key can have: + +- **[S]** keys can be used for signing +- **[E]** keys can be used for encryption +- **[A]** keys can be used for authentication +- **[C]** keys can be used for certifying other keys + +The key with the **[C]** capability is often called the "master" key, +but this terminology is misleading because it implies that the Certify +key can be used in place of any of other subkey on the same chain (like +a physical "master key" can be used to open the locks made for other +keys). Since this is not the case, this guide will refer to it as "the +Certify key" to avoid any ambiguity. + +It is critical to fully understand the following: + +1. All subkeys are fully independent from each other. If you lose a + private subkey, it cannot be restored or recreated from any other + private key on your chain. +2. With the exception of the Certify key, there can be multiple subkeys + with identical capabilities (e.g. you can have 2 valid encryption + subkeys, 3 valid signing subkeys, but only one valid certification + subkey). All subkeys are fully independent -- a message encrypted to + one **[E]** subkey cannot be decrypted with any other **[E]** subkey + you may also have. +3. A single subkey may have multiple capabilities (e.g. your **[C]** key + can also be your **[S]** key). + +The key carrying the **[C]** (certify) capability is the only key that +can be used to indicate relationship with other keys. Only the **[C]** +key can be used to: - add or revoke other keys (subkeys) with S/E/A capabilities - add, change or revoke identities (uids) associated with the key @@ -180,7 +179,7 @@ relationship with other keys. Only the **[C]** key can be used to: By default, GnuPG creates the following when generating new keys: -- A master key carrying both Certify and Sign capabilities (**[SC]**) +- One subkey carrying both Certify and Sign capabilities (**[SC]**) - A separate subkey with the Encryption capability (**[E]**) If you used the default parameters when generating your key, then that @@ -192,9 +191,6 @@ for example:: uid [ultimate] Alice Dev <adev@kernel.org> ssb rsa2048 2018-01-23 [E] [expires: 2020-01-23] -Any key carrying the **[C]** capability is your master key, regardless -of any other capabilities it may have assigned to it. - The long line under the ``sec`` entry is your key fingerprint -- whenever you see ``[fpr]`` in the examples below, that 40-character string is what it refers to. @@ -215,37 +211,30 @@ strong passphrase. To set it or change it, use:: Create a separate Signing subkey -------------------------------- -Our goal is to protect your master key by moving it to offline media, so -if you only have a combined **[SC]** key, then you should create a separate -signing subkey:: +Our goal is to protect your Certify key by moving it to offline media, +so if you only have a combined **[SC]** key, then you should create a +separate signing subkey:: $ gpg --quick-addkey [fpr] ed25519 sign -Remember to tell the keyservers about this change, so others can pull down -your new subkey:: - - $ gpg --send-key [fpr] - .. note:: ECC support in GnuPG GnuPG 2.1 and later has full support for Elliptic Curve Cryptography, with ability to combine ECC subkeys with traditional - RSA master keys. The main upside of ECC cryptography is that it is - much faster computationally and creates much smaller signatures when + RSA keys. The main upside of ECC cryptography is that it is much + faster computationally and creates much smaller signatures when compared byte for byte with 2048+ bit RSA keys. Unless you plan on using a smartcard device that does not support ECC operations, we recommend that you create an ECC signing subkey for your kernel work. - If for some reason you prefer to stay with RSA subkeys, just replace - "ed25519" with "rsa2048" in the above command. Additionally, if you - plan to use a hardware device that does not support ED25519 ECC - keys, like Nitrokey Pro or a Yubikey, then you should use - "nistp256" instead or "ed25519." + Note, that if you plan to use a hardware device that does not + support ED25519 ECC keys, you should choose "nistp256" instead or + "ed25519." -Back up your master key for disaster recovery ---------------------------------------------- +Back up your Certify key for disaster recovery +---------------------------------------------- The more signatures you have on your PGP key from other developers, the more reasons you have to create a backup version that lives on something @@ -277,9 +266,7 @@ home, such as your bank vault. Your printer is probably no longer a simple dumb device connected to your parallel port, but since the output is still encrypted with your passphrase, printing out even to "cloud-integrated" modern - printers should remain a relatively safe operation. One option is to - change the passphrase on your master key immediately after you are - done with paperkey. + printers should remain a relatively safe operation. Back up your whole GnuPG directory ---------------------------------- @@ -300,7 +287,7 @@ will use for backup purposes. You will need to encrypt them using LUKS -- refer to your distro's documentation on how to accomplish this. For the encryption passphrase, you can use the same one as on your -master key. +PGP key. Once the encryption process is over, re-insert the USB drive and make sure it gets properly mounted. Copy your entire ``.gnupg`` directory @@ -319,7 +306,7 @@ far away, because you'll need to use it every now and again for things like editing identities, adding or revoking subkeys, or signing other people's keys. -Remove the master key from your homedir +Remove the Certify key from your homedir ---------------------------------------- The files in our home directory are not as well protected as we like to @@ -334,7 +321,7 @@ think. They can be leaked or stolen via many different means: Protecting your key with a good passphrase greatly helps reduce the risk of any of the above, but passphrases can be discovered via keyloggers, shoulder-surfing, or any number of other means. For this reason, the -recommended setup is to remove your master key from your home directory +recommended setup is to remove your Certify key from your home directory and store it on offline storage. .. warning:: @@ -343,7 +330,7 @@ and store it on offline storage. your GnuPG directory in its entirety. What we are about to do will render your key useless if you do not have a usable backup! -First, identify the keygrip of your master key:: +First, identify the keygrip of your Certify key:: $ gpg --with-keygrip --list-key [fpr] @@ -359,7 +346,7 @@ The output will be something like this:: Keygrip = 3333000000000000000000000000000000000000 Find the keygrip entry that is beneath the ``pub`` line (right under the -master key fingerprint). This will correspond directly to a file in your +Certify key fingerprint). This will correspond directly to a file in your ``~/.gnupg`` directory:: $ cd ~/.gnupg/private-keys-v1.d @@ -369,13 +356,13 @@ master key fingerprint). This will correspond directly to a file in your 3333000000000000000000000000000000000000.key All you have to do is simply remove the .key file that corresponds to -the master keygrip:: +the Certify key keygrip:: $ cd ~/.gnupg/private-keys-v1.d $ rm 1111000000000000000000000000000000000000.key Now, if you issue the ``--list-secret-keys`` command, it will show that -the master key is missing (the ``#`` indicates it is not available):: +the Certify key is missing (the ``#`` indicates it is not available):: $ gpg --list-secret-keys sec# rsa2048 2018-01-24 [SC] [expires: 2020-01-24] @@ -404,7 +391,7 @@ file, which still contains your private keys. Move the subkeys to a dedicated crypto device ============================================= -Even though the master key is now safe from being leaked or stolen, the +Even though the Certify key is now safe from being leaked or stolen, the subkeys are still in your home directory. Anyone who manages to get their hands on those will be able to decrypt your communication or fake your signatures (if they know the passphrase). Furthermore, each time a @@ -447,7 +434,8 @@ functionality. There are several options available: - `Yubikey 5`_: proprietary hardware and software, but cheaper than Nitrokey Pro and comes available in the USB-C form that is more useful with newer laptops. Offers additional security features such as FIDO - U2F, among others, and now finally supports ECC keys (NISTP). + U2F, among others, and now finally supports NISTP and ED25519 ECC + keys. `LWN has a good review`_ of some of the above models, as well as several others. Your choice will depend on cost, shipping availability in your @@ -460,7 +448,7 @@ geographical region, and open/proprietary hardware considerations. Foundation. .. _`Nitrokey Start`: https://shop.nitrokey.com/shop/product/nitrokey-start-6 -.. _`Nitrokey Pro 2`: https://shop.nitrokey.com/shop/product/nitrokey-pro-2-3 +.. _`Nitrokey Pro 2`: https://shop.nitrokey.com/shop/product/nkpr2-nitrokey-pro-2-3 .. _`Yubikey 5`: https://www.yubico.com/products/yubikey-5-overview/ .. _Gnuk: https://www.fsij.org/doc-gnuk/ .. _`LWN has a good review`: https://lwn.net/Articles/736231/ @@ -627,10 +615,10 @@ Other common GnuPG operations Here is a quick reference for some common operations you'll need to do with your PGP key. -Mounting your master key offline storage -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Mounting your safe offline storage +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -You will need your master key for any of the operations below, so you +You will need your Certify key for any of the operations below, so you will first need to mount your backup offline storage and tell GnuPG to use it:: @@ -644,7 +632,7 @@ your regular home directory location). Extending key expiration date ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -The master key has the default expiration date of 2 years from the date +The Certify key has the default expiration date of 2 years from the date of creation. This is done both for security reasons and to make obsolete keys eventually disappear from keyservers. @@ -685,6 +673,7 @@ remote end. .. _`Agent Forwarding over SSH`: https://wiki.gnupg.org/AgentForwarding +.. _pgp_with_git: Using PGP with Git ================== @@ -828,6 +817,63 @@ You can tell git to always sign commits:: .. _verify_identities: + +How to work with signed patches +------------------------------- + +It is possible to use your PGP key to sign patches sent to kernel +developer mailing lists. Since existing email signature mechanisms +(PGP-Mime or PGP-inline) tend to cause problems with regular code +review tasks, you should use the tool kernel.org created for this +purpose that puts cryptographic attestation signatures into message +headers (a-la DKIM): + +- `Patatt Patch Attestation`_ + +.. _`Patatt Patch Attestation`: https://pypi.org/project/patatt/ + +Installing and configuring patatt +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Patatt is packaged for many distributions already, so please check there +first. You can also install it from pypi using "``pip install patatt``". + +If you already have your PGP key configured with git (via the +``user.signingKey`` configuration parameter), then patatt requires no +further configuration. You can start signing your patches by installing +the git-send-email hook in the repository you want:: + + patatt install-hook + +Now any patches you send with ``git send-email`` will be automatically +signed with your cryptographic signature. + +Checking patatt signatures +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +If you are using ``b4`` to retrieve and apply patches, then it will +automatically attempt to verify all DKIM and patatt signatures it +encounters, for example:: + + $ b4 am 20220720205013.890942-1-broonie@kernel.org + [...] + Checking attestation on all messages, may take a moment... + --- + ✓ [PATCH v1 1/3] kselftest/arm64: Correct buffer allocation for SVE Z registers + ✓ [PATCH v1 2/3] arm64/sve: Document our actual ABI for clearing registers on syscall + ✓ [PATCH v1 3/3] kselftest/arm64: Enforce actual ABI for SVE syscalls + --- + ✓ Signed: openpgp/broonie@kernel.org + ✓ Signed: DKIM/kernel.org + +.. note:: + + Patatt and b4 are still in active development and you should check + the latest documentation for these projects for any new or updated + features. + +.. _kernel_identities: + How to verify kernel developer identities ========================================= @@ -899,65 +945,17 @@ the new default in GnuPG v2). To set it, add (or modify) the trust-model tofu+pgp -How to use keyservers (more) safely ------------------------------------ - -If you get a "No public key" error when trying to validate someone's -tag, then you should attempt to lookup that key using a keyserver. It is -important to keep in mind that there is absolutely no guarantee that the -key you retrieve from PGP keyservers belongs to the actual person -- -that much is by design. You are supposed to use the Web of Trust to -establish key validity. - -How to properly maintain the Web of Trust is beyond the scope of this -document, simply because doing it properly requires both effort and -dedication that tends to be beyond the caring threshold of most human -beings. Here are some shortcuts that will help you reduce the risk of -importing a malicious key. - -First, let's say you've tried to run ``git verify-tag`` but it returned -an error saying the key is not found:: - - $ git verify-tag sunxi-fixes-for-4.15-2 - gpg: Signature made Sun 07 Jan 2018 10:51:55 PM EST - gpg: using RSA key DA73759BF8619E484E5A3B47389A54219C0F2430 - gpg: issuer "wens@...org" - gpg: Can't check signature: No public key - -Let's query the keyserver for more info about that key fingerprint (the -fingerprint probably belongs to a subkey, so we can't use it directly -without finding out the ID of the master key it is associated with):: - - $ gpg --search DA73759BF8619E484E5A3B47389A54219C0F2430 - gpg: data source: hkp://keys.gnupg.net - (1) Chen-Yu Tsai <wens@...org> - 4096 bit RSA key C94035C21B4F2AEB, created: 2017-03-14, expires: 2019-03-15 - Keys 1-1 of 1 for "DA73759BF8619E484E5A3B47389A54219C0F2430". Enter number(s), N)ext, or Q)uit > q - -Locate the ID of the master key in the output, in our example -``C94035C21B4F2AEB``. Now display the key of Linus Torvalds that you -have on your keyring:: - - $ gpg --list-key torvalds@kernel.org - pub rsa2048 2011-09-20 [SC] - ABAF11C65A2970B130ABE3C479BE3E4300411886 - uid [ unknown] Linus Torvalds <torvalds@kernel.org> - sub rsa2048 2011-09-20 [E] - -Next, find a trust path from Linus Torvalds to the key-id you found via ``gpg ---search`` of the unknown key. For this, you can use several tools including -https://github.com/mricon/wotmate, -https://git.kernel.org/pub/scm/docs/kernel/pgpkeys.git/tree/graphs, and -https://the.earth.li/~noodles/pathfind.html. - -If you get a few decent trust paths, then it's a pretty good indication -that it is a valid key. You can add it to your keyring from the -keyserver now:: - - $ gpg --recv-key C94035C21B4F2AEB - -This process is not perfect, and you are obviously trusting the -administrators of the PGP Pathfinder service to not be malicious (in -fact, this goes against :ref:`devs_not_infra`). However, if you -do not carefully maintain your own web of trust, then it is a marked -improvement over blindly trusting keyservers. +Using the kernel.org web of trust repository +-------------------------------------------- + +Kernel.org maintains a git repository with developers' public keys as a +replacement for replicating keyserver networks that have gone mostly +dark in the past few years. The full documentation for how to set up +that repository as your source of public keys can be found here: + +- `Kernel developer PGP Keyring`_ + +If you are a kernel developer, please consider submitting your key for +inclusion into that keyring. + +.. _`Kernel developer PGP Keyring`: https://korg.docs.kernel.org/pgpkeys.html diff --git a/Documentation/process/stable-kernel-rules.rst b/Documentation/process/stable-kernel-rules.rst index c61865e91f52..2fd8aa593a28 100644 --- a/Documentation/process/stable-kernel-rules.rst +++ b/Documentation/process/stable-kernel-rules.rst @@ -97,6 +97,12 @@ text, like this: commit <sha1> upstream. +or alternatively: + +.. code-block:: none + + [ Upstream commit <sha1> ] + Additionally, some patches submitted via :ref:`option_1` may have additional patch prerequisites which can be cherry-picked. This can be specified in the following format in the sign-off area: diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst index be49d8f2601b..7dc94555417d 100644 --- a/Documentation/process/submitting-patches.rst +++ b/Documentation/process/submitting-patches.rst @@ -715,8 +715,8 @@ references. .. _backtraces: -Backtraces in commit mesages -^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Backtraces in commit messages +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Backtraces help document the call chain leading to a problem. However, not all backtraces are helpful. For example, early boot call chains are diff --git a/Documentation/rust/arch-support.rst b/Documentation/rust/arch-support.rst new file mode 100644 index 000000000000..6982b63775da --- /dev/null +++ b/Documentation/rust/arch-support.rst @@ -0,0 +1,19 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Arch Support +============ + +Currently, the Rust compiler (``rustc``) uses LLVM for code generation, +which limits the supported architectures that can be targeted. In addition, +support for building the kernel with LLVM/Clang varies (please see +Documentation/kbuild/llvm.rst). This support is needed for ``bindgen`` +which uses ``libclang``. + +Below is a general summary of architectures that currently work. Level of +support corresponds to ``S`` values in the ``MAINTAINERS`` file. + +============ ================ ============================================== +Architecture Level of support Constraints +============ ================ ============================================== +``x86`` Maintained ``x86_64`` only. +============ ================ ============================================== diff --git a/Documentation/rust/coding-guidelines.rst b/Documentation/rust/coding-guidelines.rst new file mode 100644 index 000000000000..aa8ed082613e --- /dev/null +++ b/Documentation/rust/coding-guidelines.rst @@ -0,0 +1,216 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Coding Guidelines +================= + +This document describes how to write Rust code in the kernel. + + +Style & formatting +------------------ + +The code should be formatted using ``rustfmt``. In this way, a person +contributing from time to time to the kernel does not need to learn and +remember one more style guide. More importantly, reviewers and maintainers +do not need to spend time pointing out style issues anymore, and thus +less patch roundtrips may be needed to land a change. + +.. note:: Conventions on comments and documentation are not checked by + ``rustfmt``. Thus those are still needed to be taken care of. + +The default settings of ``rustfmt`` are used. This means the idiomatic Rust +style is followed. For instance, 4 spaces are used for indentation rather +than tabs. + +It is convenient to instruct editors/IDEs to format while typing, +when saving or at commit time. However, if for some reason reformatting +the entire kernel Rust sources is needed at some point, the following can be +run:: + + make LLVM=1 rustfmt + +It is also possible to check if everything is formatted (printing a diff +otherwise), for instance for a CI, with:: + + make LLVM=1 rustfmtcheck + +Like ``clang-format`` for the rest of the kernel, ``rustfmt`` works on +individual files, and does not require a kernel configuration. Sometimes it may +even work with broken code. + + +Comments +-------- + +"Normal" comments (i.e. ``//``, rather than code documentation which starts +with ``///`` or ``//!``) are written in Markdown the same way as documentation +comments are, even though they will not be rendered. This improves consistency, +simplifies the rules and allows to move content between the two kinds of +comments more easily. For instance: + +.. code-block:: rust + + // `object` is ready to be handled now. + f(object); + +Furthermore, just like documentation, comments are capitalized at the beginning +of a sentence and ended with a period (even if it is a single sentence). This +includes ``// SAFETY:``, ``// TODO:`` and other "tagged" comments, e.g.: + +.. code-block:: rust + + // FIXME: The error should be handled properly. + +Comments should not be used for documentation purposes: comments are intended +for implementation details, not users. This distinction is useful even if the +reader of the source file is both an implementor and a user of an API. In fact, +sometimes it is useful to use both comments and documentation at the same time. +For instance, for a ``TODO`` list or to comment on the documentation itself. +For the latter case, comments can be inserted in the middle; that is, closer to +the line of documentation to be commented. For any other case, comments are +written after the documentation, e.g.: + +.. code-block:: rust + + /// Returns a new [`Foo`]. + /// + /// # Examples + /// + // TODO: Find a better example. + /// ``` + /// let foo = f(42); + /// ``` + // FIXME: Use fallible approach. + pub fn f(x: i32) -> Foo { + // ... + } + +One special kind of comments are the ``// SAFETY:`` comments. These must appear +before every ``unsafe`` block, and they explain why the code inside the block is +correct/sound, i.e. why it cannot trigger undefined behavior in any case, e.g.: + +.. code-block:: rust + + // SAFETY: `p` is valid by the safety requirements. + unsafe { *p = 0; } + +``// SAFETY:`` comments are not to be confused with the ``# Safety`` sections +in code documentation. ``# Safety`` sections specify the contract that callers +(for functions) or implementors (for traits) need to abide by. ``// SAFETY:`` +comments show why a call (for functions) or implementation (for traits) actually +respects the preconditions stated in a ``# Safety`` section or the language +reference. + + +Code documentation +------------------ + +Rust kernel code is not documented like C kernel code (i.e. via kernel-doc). +Instead, the usual system for documenting Rust code is used: the ``rustdoc`` +tool, which uses Markdown (a lightweight markup language). + +To learn Markdown, there are many guides available out there. For instance, +the one at: + + https://commonmark.org/help/ + +This is how a well-documented Rust function may look like: + +.. code-block:: rust + + /// Returns the contained [`Some`] value, consuming the `self` value, + /// without checking that the value is not [`None`]. + /// + /// # Safety + /// + /// Calling this method on [`None`] is *[undefined behavior]*. + /// + /// [undefined behavior]: https://doc.rust-lang.org/reference/behavior-considered-undefined.html + /// + /// # Examples + /// + /// ``` + /// let x = Some("air"); + /// assert_eq!(unsafe { x.unwrap_unchecked() }, "air"); + /// ``` + pub unsafe fn unwrap_unchecked(self) -> T { + match self { + Some(val) => val, + + // SAFETY: The safety contract must be upheld by the caller. + None => unsafe { hint::unreachable_unchecked() }, + } + } + +This example showcases a few ``rustdoc`` features and some conventions followed +in the kernel: + + - The first paragraph must be a single sentence briefly describing what + the documented item does. Further explanations must go in extra paragraphs. + + - Unsafe functions must document their safety preconditions under + a ``# Safety`` section. + + - While not shown here, if a function may panic, the conditions under which + that happens must be described under a ``# Panics`` section. + + Please note that panicking should be very rare and used only with a good + reason. In almost all cases, a fallible approach should be used, typically + returning a ``Result``. + + - If providing examples of usage would help readers, they must be written in + a section called ``# Examples``. + + - Rust items (functions, types, constants...) must be linked appropriately + (``rustdoc`` will create a link automatically). + + - Any ``unsafe`` block must be preceded by a ``// SAFETY:`` comment + describing why the code inside is sound. + + While sometimes the reason might look trivial and therefore unneeded, + writing these comments is not just a good way of documenting what has been + taken into account, but most importantly, it provides a way to know that + there are no *extra* implicit constraints. + +To learn more about how to write documentation for Rust and extra features, +please take a look at the ``rustdoc`` book at: + + https://doc.rust-lang.org/rustdoc/how-to-write-documentation.html + + +Naming +------ + +Rust kernel code follows the usual Rust naming conventions: + + https://rust-lang.github.io/api-guidelines/naming.html + +When existing C concepts (e.g. macros, functions, objects...) are wrapped into +a Rust abstraction, a name as close as reasonably possible to the C side should +be used in order to avoid confusion and to improve readability when switching +back and forth between the C and Rust sides. For instance, macros such as +``pr_info`` from C are named the same in the Rust side. + +Having said that, casing should be adjusted to follow the Rust naming +conventions, and namespacing introduced by modules and types should not be +repeated in the item names. For instance, when wrapping constants like: + +.. code-block:: c + + #define GPIO_LINE_DIRECTION_IN 0 + #define GPIO_LINE_DIRECTION_OUT 1 + +The equivalent in Rust may look like (ignoring documentation): + +.. code-block:: rust + + pub mod gpio { + pub enum LineDirection { + In = bindings::GPIO_LINE_DIRECTION_IN as _, + Out = bindings::GPIO_LINE_DIRECTION_OUT as _, + } + } + +That is, the equivalent of ``GPIO_LINE_DIRECTION_IN`` would be referred to as +``gpio::LineDirection::In``. In particular, it should not be named +``gpio::gpio_line_direction::GPIO_LINE_DIRECTION_IN``. diff --git a/Documentation/rust/general-information.rst b/Documentation/rust/general-information.rst new file mode 100644 index 000000000000..49029ee82e55 --- /dev/null +++ b/Documentation/rust/general-information.rst @@ -0,0 +1,79 @@ +.. SPDX-License-Identifier: GPL-2.0 + +General Information +=================== + +This document contains useful information to know when working with +the Rust support in the kernel. + + +Code documentation +------------------ + +Rust kernel code is documented using ``rustdoc``, its built-in documentation +generator. + +The generated HTML docs include integrated search, linked items (e.g. types, +functions, constants), source code, etc. They may be read at (TODO: link when +in mainline and generated alongside the rest of the documentation): + + http://kernel.org/ + +The docs can also be easily generated and read locally. This is quite fast +(same order as compiling the code itself) and no special tools or environment +are needed. This has the added advantage that they will be tailored to +the particular kernel configuration used. To generate them, use the ``rustdoc`` +target with the same invocation used for compilation, e.g.:: + + make LLVM=1 rustdoc + +To read the docs locally in your web browser, run e.g.:: + + xdg-open rust/doc/kernel/index.html + +To learn about how to write the documentation, please see coding-guidelines.rst. + + +Extra lints +----------- + +While ``rustc`` is a very helpful compiler, some extra lints and analyses are +available via ``clippy``, a Rust linter. To enable it, pass ``CLIPPY=1`` to +the same invocation used for compilation, e.g.:: + + make LLVM=1 CLIPPY=1 + +Please note that Clippy may change code generation, thus it should not be +enabled while building a production kernel. + + +Abstractions vs. bindings +------------------------- + +Abstractions are Rust code wrapping kernel functionality from the C side. + +In order to use functions and types from the C side, bindings are created. +Bindings are the declarations for Rust of those functions and types from +the C side. + +For instance, one may write a ``Mutex`` abstraction in Rust which wraps +a ``struct mutex`` from the C side and calls its functions through the bindings. + +Abstractions are not available for all the kernel internal APIs and concepts, +but it is intended that coverage is expanded as time goes on. "Leaf" modules +(e.g. drivers) should not use the C bindings directly. Instead, subsystems +should provide as-safe-as-possible abstractions as needed. + + +Conditional compilation +----------------------- + +Rust code has access to conditional compilation based on the kernel +configuration: + +.. code-block:: rust + + #[cfg(CONFIG_X)] // Enabled (`y` or `m`) + #[cfg(CONFIG_X="y")] // Enabled as a built-in (`y`) + #[cfg(CONFIG_X="m")] // Enabled as a module (`m`) + #[cfg(not(CONFIG_X))] // Disabled diff --git a/Documentation/rust/index.rst b/Documentation/rust/index.rst new file mode 100644 index 000000000000..4ae8c66b94fa --- /dev/null +++ b/Documentation/rust/index.rst @@ -0,0 +1,22 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Rust +==== + +Documentation related to Rust within the kernel. To start using Rust +in the kernel, please read the quick-start.rst guide. + +.. toctree:: + :maxdepth: 1 + + quick-start + general-information + coding-guidelines + arch-support + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/rust/quick-start.rst b/Documentation/rust/quick-start.rst new file mode 100644 index 000000000000..13b7744b1e27 --- /dev/null +++ b/Documentation/rust/quick-start.rst @@ -0,0 +1,232 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Quick Start +=========== + +This document describes how to get started with kernel development in Rust. + + +Requirements: Building +---------------------- + +This section explains how to fetch the tools needed for building. + +Some of these requirements might be available from Linux distributions +under names like ``rustc``, ``rust-src``, ``rust-bindgen``, etc. However, +at the time of writing, they are likely not to be recent enough unless +the distribution tracks the latest releases. + +To easily check whether the requirements are met, the following target +can be used:: + + make LLVM=1 rustavailable + +This triggers the same logic used by Kconfig to determine whether +``RUST_IS_AVAILABLE`` should be enabled; but it also explains why not +if that is the case. + + +rustc +***** + +A particular version of the Rust compiler is required. Newer versions may or +may not work because, for the moment, the kernel depends on some unstable +Rust features. + +If ``rustup`` is being used, enter the checked out source code directory +and run:: + + rustup override set $(scripts/min-tool-version.sh rustc) + +Otherwise, fetch a standalone installer or install ``rustup`` from: + + https://www.rust-lang.org + + +Rust standard library source +**************************** + +The Rust standard library source is required because the build system will +cross-compile ``core`` and ``alloc``. + +If ``rustup`` is being used, run:: + + rustup component add rust-src + +The components are installed per toolchain, thus upgrading the Rust compiler +version later on requires re-adding the component. + +Otherwise, if a standalone installer is used, the Rust repository may be cloned +into the installation folder of the toolchain:: + + git clone --recurse-submodules \ + --branch $(scripts/min-tool-version.sh rustc) \ + https://github.com/rust-lang/rust \ + $(rustc --print sysroot)/lib/rustlib/src/rust + +In this case, upgrading the Rust compiler version later on requires manually +updating this clone. + + +libclang +******** + +``libclang`` (part of LLVM) is used by ``bindgen`` to understand the C code +in the kernel, which means LLVM needs to be installed; like when the kernel +is compiled with ``CC=clang`` or ``LLVM=1``. + +Linux distributions are likely to have a suitable one available, so it is +best to check that first. + +There are also some binaries for several systems and architectures uploaded at: + + https://releases.llvm.org/download.html + +Otherwise, building LLVM takes quite a while, but it is not a complex process: + + https://llvm.org/docs/GettingStarted.html#getting-the-source-code-and-building-llvm + +Please see Documentation/kbuild/llvm.rst for more information and further ways +to fetch pre-built releases and distribution packages. + + +bindgen +******* + +The bindings to the C side of the kernel are generated at build time using +the ``bindgen`` tool. A particular version is required. + +Install it via (note that this will download and build the tool from source):: + + cargo install --locked --version $(scripts/min-tool-version.sh bindgen) bindgen + + +Requirements: Developing +------------------------ + +This section explains how to fetch the tools needed for developing. That is, +they are not needed when just building the kernel. + + +rustfmt +******* + +The ``rustfmt`` tool is used to automatically format all the Rust kernel code, +including the generated C bindings (for details, please see +coding-guidelines.rst). + +If ``rustup`` is being used, its ``default`` profile already installs the tool, +thus nothing needs to be done. If another profile is being used, the component +can be installed manually:: + + rustup component add rustfmt + +The standalone installers also come with ``rustfmt``. + + +clippy +****** + +``clippy`` is a Rust linter. Running it provides extra warnings for Rust code. +It can be run by passing ``CLIPPY=1`` to ``make`` (for details, please see +general-information.rst). + +If ``rustup`` is being used, its ``default`` profile already installs the tool, +thus nothing needs to be done. If another profile is being used, the component +can be installed manually:: + + rustup component add clippy + +The standalone installers also come with ``clippy``. + + +cargo +***** + +``cargo`` is the Rust native build system. It is currently required to run +the tests since it is used to build a custom standard library that contains +the facilities provided by the custom ``alloc`` in the kernel. The tests can +be run using the ``rusttest`` Make target. + +If ``rustup`` is being used, all the profiles already install the tool, +thus nothing needs to be done. + +The standalone installers also come with ``cargo``. + + +rustdoc +******* + +``rustdoc`` is the documentation tool for Rust. It generates pretty HTML +documentation for Rust code (for details, please see +general-information.rst). + +``rustdoc`` is also used to test the examples provided in documented Rust code +(called doctests or documentation tests). The ``rusttest`` Make target uses +this feature. + +If ``rustup`` is being used, all the profiles already install the tool, +thus nothing needs to be done. + +The standalone installers also come with ``rustdoc``. + + +rust-analyzer +************* + +The `rust-analyzer <https://rust-analyzer.github.io/>`_ language server can +be used with many editors to enable syntax highlighting, completion, go to +definition, and other features. + +``rust-analyzer`` needs a configuration file, ``rust-project.json``, which +can be generated by the ``rust-analyzer`` Make target. + + +Configuration +------------- + +``Rust support`` (``CONFIG_RUST``) needs to be enabled in the ``General setup`` +menu. The option is only shown if a suitable Rust toolchain is found (see +above), as long as the other requirements are met. In turn, this will make +visible the rest of options that depend on Rust. + +Afterwards, go to:: + + Kernel hacking + -> Sample kernel code + -> Rust samples + +And enable some sample modules either as built-in or as loadable. + + +Building +-------- + +Building a kernel with a complete LLVM toolchain is the best supported setup +at the moment. That is:: + + make LLVM=1 + +For architectures that do not support a full LLVM toolchain, use:: + + make CC=clang + +Using GCC also works for some configurations, but it is very experimental at +the moment. + + +Hacking +------- + +To dive deeper, take a look at the source code of the samples +at ``samples/rust/``, the Rust support code under ``rust/`` and +the ``Rust hacking`` menu under ``Kernel hacking``. + +If GDB/Binutils is used and Rust symbols are not getting demangled, the reason +is the toolchain does not support Rust's new v0 mangling scheme yet. +There are a few ways out: + + - Install a newer release (GDB >= 10.2, Binutils >= 2.36). + + - Some versions of GDB (e.g. vanilla GDB 10.1) are able to use + the pre-demangled names embedded in the debug info (``CONFIG_DEBUG_INFO``). diff --git a/Documentation/scheduler/sched-design-CFS.rst b/Documentation/scheduler/sched-design-CFS.rst index 59b2d1fb4dc4..03db55504515 100644 --- a/Documentation/scheduler/sched-design-CFS.rst +++ b/Documentation/scheduler/sched-design-CFS.rst @@ -94,7 +94,7 @@ other HZ detail. Thus the CFS scheduler has no notion of "timeslices" in the way the previous scheduler had, and has no heuristics whatsoever. There is only one central tunable (you have to switch on CONFIG_SCHED_DEBUG): - /proc/sys/kernel/sched_min_granularity_ns + /sys/kernel/debug/sched/min_granularity_ns which can be used to tune the scheduler from "desktop" (i.e., low latencies) to "server" (i.e., good batching) workloads. It defaults to a setting suitable diff --git a/Documentation/security/landlock.rst b/Documentation/security/landlock.rst index 5c77730b4479..c0029d5d02eb 100644 --- a/Documentation/security/landlock.rst +++ b/Documentation/security/landlock.rst @@ -7,7 +7,7 @@ Landlock LSM: kernel documentation ================================== :Author: Mickaël Salaün -:Date: May 2022 +:Date: September 2022 Landlock's goal is to create scoped access-control (i.e. sandboxing). To harden a whole system, this feature should be available to any process, @@ -49,13 +49,13 @@ Filesystem access rights ------------------------ All access rights are tied to an inode and what can be accessed through it. -Reading the content of a directory doesn't imply to be allowed to read the +Reading the content of a directory does not imply to be allowed to read the content of a listed inode. Indeed, a file name is local to its parent directory, and an inode can be referenced by multiple file names thanks to (hard) links. Being able to unlink a file only has a direct impact on the directory, not the unlinked inode. This is the reason why -`LANDLOCK_ACCESS_FS_REMOVE_FILE` or `LANDLOCK_ACCESS_FS_REFER` are not allowed -to be tied to files but only to directories. +``LANDLOCK_ACCESS_FS_REMOVE_FILE`` or ``LANDLOCK_ACCESS_FS_REFER`` are not +allowed to be tied to files but only to directories. Tests ===== diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst index 176b73583b7a..07a620c5ca74 100644 --- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst +++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst @@ -3565,13 +3565,17 @@ given size. The second argument (type) and the third argument (device pointer) are dependent on the bus. For normal devices, pass the device pointer (typically identical as ``card->dev``) to the third argument with -``SNDRV_DMA_TYPE_DEV`` type. For the continuous buffer unrelated to the +``SNDRV_DMA_TYPE_DEV`` type. + +For the continuous buffer unrelated to the bus can be pre-allocated with ``SNDRV_DMA_TYPE_CONTINUOUS`` type. You can pass NULL to the device pointer in that case, which is the default mode implying to allocate with ``GFP_KERNEL`` flag. -If you need a different GFP flag, you can pass it by encoding the flag -into the device pointer via a special macro -:c:func:`snd_dma_continuous_data()`. +If you need a restricted (lower) address, set up the coherent DMA mask +bits for the device, and pass the device pointer, like the normal +device memory allocations. For this type, it's still allowed to pass +NULL to the device pointer, too, if no address restriction is needed. + For the scatter-gather buffers, use ``SNDRV_DMA_TYPE_DEV_SG`` with the device pointer (see the `Non-Contiguous Buffers`_ section). @@ -3811,15 +3815,6 @@ arguments here. Since each vmalloc call should succeed at any time, we don't need to pre-allocate the buffers like other continuous pages. -If you need the 32bit DMA allocation, pass the device pointer encoded -by :c:func:`snd_dma_continuous_data()` with ``GFP_KERNEL|__GFP_DMA32`` -argument. - -:: - - snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_VMALLOC, - snd_dma_continuous_data(GFP_KERNEL | __GFP_DMA32), 0, 0); - Proc Interface ============== diff --git a/Documentation/sphinx/kerneldoc-preamble.sty b/Documentation/sphinx/kerneldoc-preamble.sty index 2a29cbe51396..9707e033c8c4 100644 --- a/Documentation/sphinx/kerneldoc-preamble.sty +++ b/Documentation/sphinx/kerneldoc-preamble.sty @@ -70,8 +70,16 @@ % Translations have Asian (CJK) characters which are only displayed if % xeCJK is used +\usepackage{ifthen} +\newboolean{enablecjk} +\setboolean{enablecjk}{false} \IfFontExistsTF{Noto Sans CJK SC}{ - % Load xeCJK when CJK font is available + \IfFileExists{xeCJK.sty}{ + \setboolean{enablecjk}{true} + }{} +}{} +\ifthenelse{\boolean{enablecjk}}{ + % Load xeCJK when both the Noto Sans CJK font and xeCJK.sty are available. \usepackage{xeCJK} % Noto CJK fonts don't provide slant shape. [AutoFakeSlant] permits % its emulation. @@ -196,7 +204,7 @@ % Inactivate CJK after tableofcontents \apptocmd{\sphinxtableofcontents}{\kerneldocCJKoff}{}{} \xeCJKsetup{CJKspace = true}% For inter-phrase space of Korean TOC -}{ % No CJK font found +}{ % Don't enable CJK % Custom macros to on/off CJK and switch CJK fonts (Dummy) \newcommand{\kerneldocCJKon}{} \newcommand{\kerneldocCJKoff}{} @@ -204,14 +212,16 @@ %% and ignore the argument (#1) in their definitions, whole contents of %% CJK chapters can be ignored. \newcommand{\kerneldocBeginSC}[1]{% - %% Put a note on missing CJK fonts in place of zh_CN translation. - \begin{sphinxadmonition}{note}{Note on missing fonts:} + %% Put a note on missing CJK fonts or the xecjk package in place of + %% zh_CN translation. + \begin{sphinxadmonition}{note}{Note on missing fonts and a package:} Translations of Simplified Chinese (zh\_CN), Traditional Chinese (zh\_TW), Korean (ko\_KR), and Japanese (ja\_JP) were skipped - due to the lack of suitable font families. + due to the lack of suitable font families and/or the texlive-xecjk + package. If you want them, please install ``Noto Sans CJK'' font families - by following instructions from + along with the texlive-xecjk package by following instructions from \sphinxcode{./scripts/sphinx-pre-install}. Having optional ``Noto Serif CJK'' font families will improve the looks of those translations. diff --git a/Documentation/staging/index.rst b/Documentation/staging/index.rst index abd0d18254d2..ded8254bc0d7 100644 --- a/Documentation/staging/index.rst +++ b/Documentation/staging/index.rst @@ -14,45 +14,3 @@ Unsorted Documentation static-keys tee xz - -Atomic Types -============ - -.. raw:: latex - - \footnotesize - -.. include:: ../atomic_t.txt - :literal: - -.. raw:: latex - - \normalsize - -Atomic bitops -============= - -.. raw:: latex - - \footnotesize - -.. include:: ../atomic_bitops.txt - :literal: - -.. raw:: latex - - \normalsize - -Memory Barriers -=============== - -.. raw:: latex - - \footnotesize - -.. include:: ../memory-barriers.txt - :literal: - -.. raw:: latex - - \normalsize diff --git a/Documentation/subsystem-apis.rst b/Documentation/subsystem-apis.rst new file mode 100644 index 000000000000..af65004a80aa --- /dev/null +++ b/Documentation/subsystem-apis.rst @@ -0,0 +1,58 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================== +Kernel subsystem documentation +============================== + +These books get into the details of how specific kernel subsystems work +from the point of view of a kernel developer. Much of the information here +is taken directly from the kernel source, with supplemental material added +as needed (or at least as we managed to add it — probably *not* all that is +needed). + +**Fixme**: much more organizational work is needed here. + +.. toctree:: + :maxdepth: 1 + + driver-api/index + core-api/index + locking/index + accounting/index + block/index + cdrom/index + cpu-freq/index + fb/index + fpga/index + hid/index + i2c/index + iio/index + isdn/index + infiniband/index + leds/index + netlabel/index + networking/index + pcmcia/index + power/index + target/index + timers/index + spi/index + w1/index + watchdog/index + virt/index + input/index + hwmon/index + gpu/index + security/index + sound/index + crypto/index + filesystems/index + mm/index + bpf/index + usb/index + PCI/index + scsi/index + misc-devices/index + scheduler/index + mhi/index + peci/index diff --git a/Documentation/trace/histogram.rst b/Documentation/trace/histogram.rst index 859fd1b76c63..c1b685a38f6b 100644 --- a/Documentation/trace/histogram.rst +++ b/Documentation/trace/histogram.rst @@ -412,7 +412,7 @@ Extended error information Because the default sort key above is 'hitcount', the above shows a the list of call_sites by increasing hitcount, so that at the bottom we see the functions that made the most kmalloc calls during the - run. If instead we we wanted to see the top kmalloc callers in + run. If instead we wanted to see the top kmalloc callers in terms of the number of bytes requested rather than the number of calls, and we wanted the top caller to appear at the top, we can use the 'sort' parameter, along with the 'descending' modifier:: diff --git a/Documentation/trace/kprobes.rst b/Documentation/trace/kprobes.rst index f318bceda1e6..48cf778a2468 100644 --- a/Documentation/trace/kprobes.rst +++ b/Documentation/trace/kprobes.rst @@ -328,8 +328,8 @@ Configuring Kprobes =================== When configuring the kernel using make menuconfig/xconfig/oldconfig, -ensure that CONFIG_KPROBES is set to "y". Under "General setup", look -for "Kprobes". +ensure that CONFIG_KPROBES is set to "y", look for "Kprobes" under +"General architecture-dependent options". So that you can load and unload Kprobes-based instrumentation modules, make sure "Loadable module support" (CONFIG_MODULES) and "Module diff --git a/Documentation/trace/timerlat-tracer.rst b/Documentation/trace/timerlat-tracer.rst index d643c95c01eb..db17df312bc8 100644 --- a/Documentation/trace/timerlat-tracer.rst +++ b/Documentation/trace/timerlat-tracer.rst @@ -20,7 +20,7 @@ For example:: [root@f32 ~]# cd /sys/kernel/tracing/ [root@f32 tracing]# echo timerlat > current_tracer -It is possible to follow the trace by reading the trace trace file:: +It is possible to follow the trace by reading the trace file:: [root@f32 tracing]# cat trace # tracer: timerlat diff --git a/Documentation/translations/ja_JP/SubmittingPatches b/Documentation/translations/ja_JP/SubmittingPatches index 66ce0d8b0526..04deb77b20c6 100644 --- a/Documentation/translations/ja_JP/SubmittingPatches +++ b/Documentation/translations/ja_JP/SubmittingPatches @@ -35,8 +35,7 @@ Linux カーネルに変更を加えたいと思っている個人又は会社 てもらえやすくする提案を集めたものです。 コードを投稿する前に、Documentation/process/submit-checklist.rst の項目リストに目 -を通してチェックしてください。もしあなたがドライバーを投稿しようとし -ているなら、Documentation/process/submitting-drivers.rst にも目を通してください。 +を通してチェックしてください。 -------------------------------------------- セクション1 パッチの作り方と送り方 diff --git a/Documentation/translations/zh_CN/IRQ.txt b/Documentation/translations/zh_CN/IRQ.txt deleted file mode 100644 index 9aec8dca4fcf..000000000000 --- a/Documentation/translations/zh_CN/IRQ.txt +++ /dev/null @@ -1,39 +0,0 @@ -Chinese translated version of Documentation/core-api/irq/index.rst - -If you have any comment or update to the content, please contact the -original document maintainer directly. However, if you have a problem -communicating in English you can also ask the Chinese maintainer for -help. Contact the Chinese maintainer if this translation is outdated -or if there is a problem with the translation. - -Maintainer: Eric W. Biederman <ebiederman@xmission.com> -Chinese maintainer: Fu Wei <tekkamanninja@gmail.com> ---------------------------------------------------------------------- -Documentation/core-api/irq/index.rst 的中文翻译 - -如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文 -交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻 -译存在问题，请联系中文版维护者。 -英文版维护者： Eric W. Biederman <ebiederman@xmission.com> -中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com> -中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com> -中文版校译者： 傅炜 Fu Wei <tekkamanninja@gmail.com> - - -以下为正文 ---------------------------------------------------------------------- -何为 IRQ? - -一个 IRQ 是来自某个设备的一个中断请求。目前，它们可以来自一个硬件引脚， -或来自一个数据包。多个设备可能连接到同个硬件引脚，从而共享一个 IRQ。 - -一个 IRQ 编号是用于告知硬件中断源的内核标识。通常情况下，这是一个 -全局 irq_desc 数组的索引，但是除了在 linux/interrupt.h 中的实现， -具体的细节是体系结构特定的。 - -一个 IRQ 编号是设备上某个可能的中断源的枚举。通常情况下，枚举的编号是 -该引脚在系统内中断控制器的所有输入引脚中的编号。对于 ISA 总线中的情况， -枚举的是在两个 i8259 中断控制器中 16 个输入引脚。 - -架构可以对 IRQ 编号指定额外的含义，在硬件涉及任何手工配置的情况下， -是被提倡的。ISA 的 IRQ 是一个分配这类额外含义的典型例子。 diff --git a/Documentation/translations/zh_CN/PCI/acpi-info.rst b/Documentation/translations/zh_CN/PCI/acpi-info.rst new file mode 100644 index 000000000000..a35f39dcd858 --- /dev/null +++ b/Documentation/translations/zh_CN/PCI/acpi-info.rst @@ -0,0 +1,139 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/PCI/acpi-info.rst + +:翻译: + + 司延腾 Yanteng Si <siyanteng@loongson.cn> + +:校译: + + +===================== +PCI主桥的ACPI注意事项 +===================== + +一般的规则是，ACPI命名空间应该描述操作系统可能使用的所有东西，除非有其他方法让操作系 +统找到它[1, 2]。 + +例如，没有标准的硬件机制来枚举PCI主桥，所以ACPI命名空间必须描述每个主桥、访问它 +下面的PCI配置空间的方法、主桥转发到PCI的地址空间窗口（使用_CRS）以及传统的INTx +中断的路由（使用_PRT）。 + +在主桥下面的PCI设备，通常不需要通过ACPI描述。操作系统可以通过标准的PCI枚举机制来 +发现它们，使用配置访问来发现和识别设备，并读取和测量它们的BAR。然而，如果ACPI为它们 +提供电源管理或热插拔功能，或者如果设备有由平台中断控制器连接的INTx中断，需要一个_PRT +来描述这些连接，这种情况下ACPI可以描述PCI设备。 + +ACPI资源描述是通过ACPI命名空间中设备的_CRS对象完成的[2]。_CRS就像一个通用的PCI BAR： +操作系统可以读取_CRS并找出正在消耗的资源，即使它没有该设备的驱动程序[3]。这一点很重要， +因为它意味着一个旧的操作系统可以正确地工作，即使是在操作系统不知道的新设备的系统上。新设 +备可能什么都不做，但操作系统至少可以确保没有资源与它们冲突。 + +像MCFG、HPET、ECDT等静态表，不是保留地址空间的机制。静态表是在操作系统在启动初期且在它 +能够解析ACPI命名空间之前需要知道的东西。如果定义了一个新的表，即使旧的操作系统忽略了这 +个表，它也需要正常运行。_CRS允许这样做，因为它是通用的，可以被旧的操作系统解析；而静态表 +则不允许。 + +如果操作系统要管理一个通过ACPI描述的不可发现的设备，该设备将有一个特定的_HID/_CID，以 +告诉操作系统与之绑定的驱动程序，并且_CRS告诉操作系统和驱动程序该设备的寄存器在哪里。 + +PCI主桥是PNP0A03或PNP0A08设备。它们的_CRS应该描述它们所消耗的所有地址空间。这包括它 +们转发到PCI总线上的所有窗口，以及不转发到PCI的主桥本身的寄存器。主桥的寄存器包括次要/下 +级总线寄存器，决定了桥下面的总线范围，窗口寄存器描述了桥洞，等等。这些都是设备相关的，非 +架构相关的东西，所以PNP0A03/PNP0A08驱动可以管理它们的唯一方法是通过_PRS/_CRS/_SRS， +它包含了特定于设备的细节。主桥寄存器也包括ECAM空间，因为它是由主桥消耗的。 + +ACPI定义了一个Consumer/Producer位来区分桥寄存器（“Consumer”下文译作消费者）和 +桥洞（“Producer”下文译作生产者）[4, 5]，但是早期的BIOS没有正确使用这个位。其结果 +是，目前的ACPI规范只为扩展地址空间描述符定义了消费者/生产者；在旧的QWord/Word/Word地 +址空间描述符中，该位应该被忽略。因此，操作系统必须假定所有的QWord/Word/Word描述符都是 +窗口。 + +在增加扩展地址空间描述符之前，消费者/生产者的失败意味着没有办法描述PNP0A03/PNP0A08设 +备本身的桥寄存器。解决办法是在PNP0C02捕捉器中描述桥寄存器（包括ECAM空间）[6]。 +除了ECAM之外，桥寄存器空间反正是特定于设备的，所以通用的PNP0A03/PNP0A08驱动程 +序(pci_root.c)没有必要了解它。 + +新的架构应该能够在PNP0A03设备中使用“消费者”扩展地址空间描述符，用于桥寄存器，包括 +ECAM，尽管对[6]的严格解释可能禁止这样做。旧的x86和ia64内核假定所有的地址空间描述 +符，包括“消费者”扩展地址空间的描述符，都是窗口，所以在这些架构上以这种方式描述桥寄 +存器是不安全的。 + +PNP0C02“主板”设备基本上是万能的。除了“不要将这些资源用于其他用途”之外，没有其他的编 +程模型。因此，PNP0C02 _CRS应该声明ACPI命名空间中(1)没有被_CRS声明的任何其他设备对 +象的地址空间，(2)不应该被OS分配给其他东西。 + +除非有一个标准的固件接口用于配置访问，例如ia64 SAL接口[7]，否则PCIe规范要求使用增强 +型配置访问方法（ECAM）。主桥消耗ECAM内存地址空间并将内存访问转换为PCI配置访问。该规范 +定义了ECAM地址空间的布局和功能；只有地址空间的基础是特定于设备的。ACPI操作系统从静态 +MCFG表或PNP0A03设备中的_CBA方法中了解基础地址。 + +MCFG表必须描述非热插拔主桥的ECAM空间[8]。由于MCFG是一个静态表，不能通过热插拔更新， +PNP0A03设备中的_CBA方法描述了可热插拔主桥的ECAM空间[9]。请注意，对于MCFG和_CBA， +基址总是对应于总线0，即使桥器下面的总线范围（通过_CRS报告）不从0开始。 + + +[1] ACPI 6.2, sec 6.1: + 对于任何在非枚举类型的总线上的设备（例如，ISA总线），OSPM会枚举设备的标识符，ACPI + 系统固件必须为每个设备提供一个_HID对象...以使OSPM能够做到这一点。 + +[2] ACPI 6.2, sec 3.7: + 操作系统枚举主板设备时，只需通过读取ACPI命名空间来寻找具有硬件ID的设备。 + + ACPI枚举的每个设备都包括ACPI命名空间中ACPI定义的对象，该对象报告设备可能占用的硬 + 件资源[_PRS]，报告设备当前使用的资源[_CRS]的对象，以及配置这些资源的对象[_SRS]。 + 这些信息被即插即用操作系统（OSPM）用来配置设备。 + +[3] ACPI 6.2, sec 6.2: + OSPM使用设备配置对象来配置通过ACPI列举的设备的硬件资源。设备配置对象提供了关于当前 + 和可能的资源需求的信息，共享资源之间的关系，以及配置硬件资源的方法。 + + 当OSPM枚举一个设备时，它调用_PRS来确定该设备的资源需求。它也可以调用_CRS来找到该设 + 备的当前资源设置。利用这些信息，即插即用系统决定设备应该消耗什么资源，并通过调用设备 + 的_SRS控制方法来设置这些资源。 + + 在ACPI中，设备可以消耗资源（例如，传统的键盘），提供资源（例如，一个专有的PCI桥）， + 或者两者都做。除非另有规定，设备的资源被假定为来自设备层次结构中设备上方最近的匹配资 + 源。 + +[4] ACPI 6.2, sec 6.4.3.5.1, 2, 3, 4: + QWord/DWord/Word 地址空间描述符 (.1, .2, .3) + 常规标志: Bit [0] 被忽略。 + + 扩展地址空间描述符 (.4) + 常规标志: Bit [0] 消费者/生产者: + + * 1 – 这个设备消费这个资源 + * 0 – 该设备生产和消费该资源 + +[5] ACPI 6.2, sec 19.6.43: + ResourceUsage指定内存范围是由这个设备（ResourceConsumer）消费还是传递给子设备 + （ResourceProducer）。如果没有指定，那么就假定是ResourceConsumer。 + +[6] PCI Firmware 3.2, sec 4.1.2: + 如果操作系统不能原生的懂得保留MMCFG区域，MMCFG区域必须由固件保留。在MCFG表中或通 + 过_CBA方法（见第4.1.3节）报告的地址范围必须通过声明主板资源来保留。对于大多数系统， + 主板资源将出现在ACPI命名空间的根部（在_SB下），在一个节点的_HID为EISAID（PNP0C0 + 2），在这种情况下的资源不应该要求在根PCI总线的_CRS。这些资源可以选择在Int15 E820 + 或EFIGetMemoryMap中作为保留内存返回，但必须始终通过ACPI作为主板资源报告。 + +[7] PCI Express 4.0, sec 7.2.2: + 对于PC兼容的系统，或者没有实现允许访问配置空间的处理器架构特定固件接口标准的系统，需 + 要使用本节中定义的ECAM。 + +[8] PCI Firmware 3.2, sec 4.1.2: + MCFG表是一个ACPI表，用于沟通的基础地址对应的非热的可移动的PCI段组范围内的PCI段组在 + 启动时提供给操作系统。这对PC兼容系统来说是必需的。 + + MCFG表仅用于沟通在启动时系统可用的PCI段组对应的基址。 + +[9] PCI Firmware 3.2, sec 4.1.3: + _CBA (Memory mapped Configuration Base Address) 控制方法是一个可选的ACPI对 + 象，用于返回热插拔主桥的64位内存映射的配置基址。_CBA 返回的基址是与处理器相关的地址。 + _CBA 控制方法被评估为一个整数。 + + 这个控制方法出现在主桥对象下。当_CBA方法出现在一个活动的主桥对象下时，操作系统会评 + 估这个结构，以确定内存映射的配置基址，对应于_CRS方法中指定的总线编号范围的PCI段组。 + 一个包含_CBA方法的ACPI命名空间对象也必须包含一个相应的_SEG方法。 diff --git a/Documentation/translations/zh_CN/PCI/index.rst b/Documentation/translations/zh_CN/PCI/index.rst index 16acb2bd9b58..cbeb33c34a98 100644 --- a/Documentation/translations/zh_CN/PCI/index.rst +++ b/Documentation/translations/zh_CN/PCI/index.rst @@ -10,9 +10,6 @@ :校译: - -.. _cn_PCI_index.rst: - =================== Linux PCI总线子系统 =================== @@ -26,12 +23,12 @@ Linux PCI总线子系统 pci-iov-howto msi-howto sysfs-pci + acpi-info Todolist: - acpi-info - pci-error-recovery - pcieaer-howto - endpoint/index - boot-interrupts +* pci-error-recovery +* pcieaer-howto +* endpoint/index +* boot-interrupts diff --git a/Documentation/translations/zh_CN/admin-guide/README.rst b/Documentation/translations/zh_CN/admin-guide/README.rst index d20949e8bf6f..e679cbc3c89d 100644 --- a/Documentation/translations/zh_CN/admin-guide/README.rst +++ b/Documentation/translations/zh_CN/admin-guide/README.rst @@ -6,10 +6,10 @@ 吴想成 Wu XiangCheng <bobwxc@email.cn> -Linux内核5.x版本 <http://kernel.org/> +Linux内核6.x版本 <http://kernel.org/> ========================================= -以下是Linux版本5的发行注记。仔细阅读它们， +以下是Linux版本6的发行注记。仔细阅读它们， 它们会告诉你这些都是什么，解释如何安装内核，以及遇到问题时该如何做。 什么是Linux？ @@ -61,27 +61,27 @@ Linux内核5.x版本 <http://kernel.org/> - 如果您要安装完整的源代码，请把内核tar档案包放在您有权限的目录中（例如您 的主目录）并将其解包:: - xz -cd linux-5.x.tar.xz | tar xvf - + xz -cd linux-6.x.tar.xz | tar xvf - 将“X”替换成最新内核的版本号。 【不要】使用 /usr/src/linux 目录！这里有一组库头文件使用的内核头文件 （通常是不完整的）。它们应该与库匹配，而不是被内核的变化搞得一团糟。 - - 您还可以通过打补丁在5.x版本之间升级。补丁以xz格式分发。要通过打补丁进行 - 安装，请获取所有较新的补丁文件，进入内核源代码（linux-5.x）的目录并 + - 您还可以通过打补丁在6.x版本之间升级。补丁以xz格式分发。要通过打补丁进行 + 安装，请获取所有较新的补丁文件，进入内核源代码（linux-6.x）的目录并 执行:: - xz -cd ../patch-5.x.xz | patch -p1 + xz -cd ../patch-6.x.xz | patch -p1 请【按顺序】替换所有大于当前源代码树版本的“x”，这样就可以了。您可能想要 删除备份文件（文件名类似xxx~ 或 xxx.orig)，并确保没有失败的补丁（文件名 类似xxx# 或 xxx.rej）。如果有，不是你就是我犯了错误。 - 与5.x内核的补丁不同，5.x.y内核（也称为稳定版内核）的补丁不是增量的，而是 - 直接应用于基本的5.x内核。例如，如果您的基本内核是5.0，并且希望应用5.0.3 - 补丁，则不应先应用5.0.1和5.0.2的补丁。类似地，如果您运行的是5.0.2内核， - 并且希望跳转到5.0.3，那么在应用5.0.3补丁之前，必须首先撤销5.0.2补丁 + 与6.x内核的补丁不同，6.x.y内核（也称为稳定版内核）的补丁不是增量的，而是 + 直接应用于基本的6.x内核。例如，如果您的基本内核是6.0，并且希望应用6.0.3 + 补丁，则不应先应用6.0.1和6.0.2的补丁。类似地，如果您运行的是6.0.2内核， + 并且希望跳转到6.0.3，那么在应用6.0.3补丁之前，必须首先撤销6.0.2补丁 （即patch -R）。更多关于这方面的内容，请阅读 :ref:`Documentation/process/applying-patches.rst <applying_patches>` 。 @@ -103,7 +103,7 @@ Linux内核5.x版本 <http://kernel.org/> 软件要求 --------- - 编译和运行5.x内核需要各种软件包的最新版本。请参考 + 编译和运行6.x内核需要各种软件包的最新版本。请参考 :ref:`Documentation/process/changes.rst <changes>` 来了解最低版本要求以及如何升级软件包。请注意，使用过旧版本的这些包可能会 导致很难追踪的间接错误，因此不要以为在生成或操作过程中出现明显问题时可以 @@ -116,12 +116,12 @@ Linux内核5.x版本 <http://kernel.org/> ``make O=output/dir`` 选项可以为输出文件（包括 .config）指定备用位置。 例如:: - kernel source code: /usr/src/linux-5.x + kernel source code: /usr/src/linux-6.x build directory: /home/name/build/kernel 要配置和构建内核，请使用:: - cd /usr/src/linux-5.x + cd /usr/src/linux-6.x make O=/home/name/build/kernel menuconfig make O=/home/name/build/kernel sudo make O=/home/name/build/kernel modules_install install @@ -227,8 +227,6 @@ Linux内核5.x版本 <http://kernel.org/> - 确保您至少有gcc 5.1可用。 有关更多信息，请参阅 :ref:`Documentation/process/changes.rst <changes>` 。 - 请注意，您仍然可以使用此内核运行a.out用户程序。 - - 执行 ``make`` 来创建压缩内核映像。如果您安装了lilo以适配内核makefile， 那么也可以进行 ``make install`` ，但是您可能需要先检查特定的lilo设置。 @@ -282,67 +280,12 @@ Linux内核5.x版本 <http://kernel.org/> 若遇到问题 ----------- - - 如果您发现了一些可能由于内核缺陷所导致的问题，请检查MAINTAINERS（维护者） - 文件看看是否有人与令您遇到麻烦的内核部分相关。如果无人在此列出，那么第二 - 个最好的方案就是把它们发给我（torvalds@linux-foundation.org），也可能发送 - 到任何其他相关的邮件列表或新闻组。 - - - 在所有的缺陷报告中，【请】告诉我们您在说什么内核，如何复现问题，以及您的 - 设置是什么的（使用您的常识）。如果问题是新的，请告诉我；如果问题是旧的， - 请尝试告诉我您什么时候首次注意到它。 - - - 如果缺陷导致如下消息:: - - unable to handle kernel paging request at address C0000010 - Oops: 0002 - EIP: 0010:XXXXXXXX - eax: xxxxxxxx ebx: xxxxxxxx ecx: xxxxxxxx edx: xxxxxxxx - esi: xxxxxxxx edi: xxxxxxxx ebp: xxxxxxxx - ds: xxxx es: xxxx fs: xxxx gs: xxxx - Pid: xx, process nr: xx - xx xx xx xx xx xx xx xx xx xx - - 或者类似的内核调试信息显示在屏幕上或在系统日志里，请【如实】复制它。 - 可能对你来说转储（dump）看起来不可理解，但它确实包含可能有助于调试问题的 - 信息。转储上方的文本也很重要：它说明了内核转储代码的原因（在上面的示例中， - 是由于内核指针错误）。更多关于如何理解转储的信息，请参见 - Documentation/admin-guide/bug-hunting.rst。 - - - 如果使用 CONFIG_KALLSYMS 编译内核，则可以按原样发送转储，否则必须使用 - ``ksymoops`` 程序来理解转储（但通常首选使用CONFIG_KALLSYMS编译）。 - 此实用程序可从 - https://www.kernel.org/pub/linux/utils/kernel/ksymoops/ 下载。 - 或者，您可以手动执行转储查找： - - - 在调试像上面这样的转储时，如果您可以查找EIP值的含义，这将非常有帮助。 - 十六进制值本身对我或其他任何人都没有太大帮助：它会取决于特定的内核设置。 - 您应该做的是从EIP行获取十六进制值（忽略 ``0010:`` ），然后在内核名字列表 - 中查找它，以查看哪个内核函数包含有问题的地址。 - - 要找到内核函数名，您需要找到与显示症状的内核相关联的系统二进制文件。就是 - 文件“linux/vmlinux”。要提取名字列表并将其与内核崩溃中的EIP进行匹配， - 请执行:: - - nm vmlinux | sort | less - - 这将为您提供一个按升序排序的内核地址列表，从中很容易找到包含有问题的地址 - 的函数。请注意，内核调试消息提供的地址不一定与函数地址完全匹配（事实上， - 这是不可能的），因此您不能只“grep”列表：不过列表将为您提供每个内核函数 - 的起点，因此通过查找起始地址低于你正在搜索的地址，但后一个函数的高于的 - 函数，你会找到您想要的。实际上，在您的问题报告中加入一些“上下文”可能是 - 一个好主意，给出相关的上下几行。 - - 如果您由于某些原因无法完成上述操作（如您使用预编译的内核映像或类似的映像）， - 请尽可能多地告诉我您的相关设置信息，这会有所帮助。有关详细信息请阅读 - ‘Documentation/admin-guide/reporting-issues.rst’。 - - - 或者，您可以在正在运行的内核上使用gdb（只读的；即不能更改值或设置断点）。 - 为此，请首先使用-g编译内核；适当地编辑arch/x86/Makefile，然后执行 ``make - clean`` 。您还需要启用CONFIG_PROC_FS（通过 ``make config`` ）。 - - 使用新内核重新启动后，执行 ``gdb vmlinux /proc/kcore`` 。现在可以使用所有 - 普通的gdb命令。查找系统崩溃点的命令是 ``l *0xXXXXXXXX`` （将xxx替换为EIP - 值）。 - - 用gdb无法调试一个当前未运行的内核是由于gdb（错误地）忽略了编译内核的起始 - 偏移量。 +如果您发现了一些可能由于内核缺陷所导致的问题，请参阅： +Documentation/translations/zh_CN/admin-guide/reporting-issues.rst 。 + +想要理解内核错误报告，请参阅： +Documentation/translations/zh_CN/admin-guide/bug-hunting.rst 。 + +更多用GDB调试内核的信息，请参阅： +Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst +和 Documentation/dev-tools/kgdb.rst 。 diff --git a/Documentation/translations/zh_CN/admin-guide/bootconfig.rst b/Documentation/translations/zh_CN/admin-guide/bootconfig.rst new file mode 100644 index 000000000000..072d17f5f199 --- /dev/null +++ b/Documentation/translations/zh_CN/admin-guide/bootconfig.rst @@ -0,0 +1,293 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/admin-guide/bootconfig.rst + +:译者: 吴想成 Wu XiangCheng <bobwxc@email.cn> + +======== +引导配置 +======== + +:作者: Masami Hiramatsu <mhiramat@kernel.org> + +概述 +==== + +引导配置扩展了现有的内核命令行，以一种更有效率的方式在引导内核时进一步支持 +键值数据。这允许管理员传递一份结构化关键字的配置文件。 + +配置文件语法 +============ + +引导配置文件的语法采用非常简单的键值结构。每个关键字由点连接的单词组成，键 +和值由 ``=`` 连接。值以分号（ ``;`` ）或换行符（ ``\n`` ）结尾。数组值中每 +个元素由逗号（ ``,`` ）分隔。:: + + KEY[.WORD[...]] = VALUE[, VALUE2[...]][;] + +与内核命令行语法不同，逗号和 ``=`` 周围允许有空格。 + +关键字只允许包含字母、数字、连字符（ ``-`` ）和下划线（ ``_`` ）。值可包含 +可打印字符和空格，但分号（ ``;`` ）、换行符（ ``\n`` ）、逗号（ ``,`` ）、 +井号（ ``#`` ）和右大括号（ ``}`` ）等分隔符除外。 + +如果你需要在值中使用这些分隔符，可以用双引号（ ``"VALUE"`` ）或单引号 +（ ``'VALUE'`` ）括起来。注意，引号无法转义。 + +键的值可以为空或不存在。这些键用于检查该键是否存在（类似布尔值）。 + +键值语法 +-------- + +引导配置文件语法允许用户通过大括号合并键名部分相同的关键字。例如:: + + foo.bar.baz = value1 + foo.bar.qux.quux = value2 + +也可以写成:: + + foo.bar { + baz = value1 + qux.quux = value2 + } + +或者更紧凑一些，写成:: + + foo.bar { baz = value1; qux.quux = value2 } + +在这两种样式中，引导解析时相同的关键字都会自动合并。因此可以追加类似的树或 +键值。 + +相同关键字的值 +-------------- + +禁止两个或多个值或数组共享同一个关键字。例如:: + + foo = bar, baz + foo = qux # !错误! 我们不可以重定义相同的关键字 + +如果你想要更新值，必须显式使用覆盖操作符 ``:=`` 。例如:: + + foo = bar, baz + foo := qux + +这样 ``foo`` 关键字的值就变成了 ``qux`` 。这对于通过添加（部分）自定义引导 +配置来覆盖默认值非常有用，免于解析默认引导配置。 + +如果你想对现有关键字追加值作为数组成员，可以使用 ``+=`` 操作符。例如:: + + foo = bar, baz + foo += qux + +这样， ``foo`` 关键字就同时拥有了 ``bar`` ， ``baz`` 和 ``qux`` 。 + +此外，父关键字下可同时存在值和子关键字。 +例如，下列配置是可行的。:: + + foo = value1 + foo.bar = value2 + foo := value3 # 这会更新foo的值。 + +注意，裸值不能直接放进结构化关键字中，必须在大括号外定义它。例如:: + + foo { + bar = value1 + bar { + baz = value2 + qux = value3 + } + } + +同时，关键字下值节点的顺序是固定的。如果值和子关键字同时存在，值永远是该关 +键字的第一个子节点。因此如果用户先指定子关键字，如:: + + foo.bar = value1 + foo = value2 + +则在程序（和/proc/bootconfig）中，它会按如下显示:: + + foo = value2 + foo.bar = value1 + +注释 +---- + +配置语法接受shell脚本风格的注释。注释以井号（ ``#`` ）开始，到换行符 +（ ``\n`` ）结束。 + +:: + + # comment line + foo = value # value is set to foo. + bar = 1, # 1st element + 2, # 2nd element + 3 # 3rd element + +会被解析为:: + + foo = value + bar = 1, 2, 3 + +注意你不能把注释放在值和分隔符（ ``,`` 或 ``;`` ）之间。如下配置语法是错误的:: + + key = 1 # comment + ,2 + + +/proc/bootconfig +================ + +/proc/bootconfig是引导配置的用户空间接口。与/proc/cmdline不同，此文件内容以 +键值列表样式显示。 +每个键值对一行，样式如下:: + + KEY[.WORDS...] = "[VALUE]"[,"VALUE2"...] + + +用引导配置引导内核 +================== + +用引导配置引导内核有两种方法：将引导配置附加到initrd镜像或直接嵌入内核中。 + +*initrd: initial RAM disk，初始内存磁盘* + +将引导配置附加到initrd +---------------------- + +由于默认情况下引导配置文件是用initrd加载的，因此它将被添加到initrd（initramfs） +镜像文件的末尾，其中包含填充、大小、校验值和12字节幻数，如下所示:: + + [initrd][bootconfig][padding][size(le32)][checksum(le32)][#BOOTCONFIG\n] + +大小和校验值为小端序存放的32位无符号值。 + +当引导配置被加到initrd镜像时，整个文件大小会对齐到4字节。空字符（ ``\0`` ） +会填补对齐空隙。因此 ``size`` 就是引导配置文件的长度+填充的字节。 + +Linux内核在内存中解码initrd镜像的最后部分以获取引导配置数据。由于这种“背负式” +的方法，只要引导加载器传递了正确的initrd文件大小，就无需更改或更新引导加载器 +和内核镜像本身。如果引导加载器意外传递了更长的大小，内核将无法找到引导配置数 +据。 + +Linux内核在tools/bootconfig下提供了 ``bootconfig`` 命令来完成此操作，管理员 +可以用它从initrd镜像中删除或追加配置文件。你可以用以下命令来构建它:: + + # make -C tools/bootconfig + +要向initrd镜像添加你的引导配置文件，请按如下命令操作（旧数据会自动移除）:: + + # tools/bootconfig/bootconfig -a your-config /boot/initrd.img-X.Y.Z + +要从镜像中移除配置，可以使用-d选项:: + + # tools/bootconfig/bootconfig -d /boot/initrd.img-X.Y.Z + +然后在内核命令行上添加 ``bootconfig`` 告诉内核去initrd文件末尾寻找内核配置。 + +将引导配置嵌入内核 +------------------ + +如果你不能使用initrd，也可以通过Kconfig选项将引导配置文件嵌入内核中。在此情 +况下，你需要用以下选项重新编译内核:: + + CONFIG_BOOT_CONFIG_EMBED=y + CONFIG_BOOT_CONFIG_EMBED_FILE="/引导配置/文件/的/路径" + +``CONFIG_BOOT_CONFIG_EMBED_FILE`` 需要从源码树或对象树开始的引导配置文件的 +绝对/相对路径。内核会将其嵌入作为默认引导配置。 + +与将引导配置附加到initrd一样，你也需要在内核命令行上添加 ``bootconfig`` 告诉 +内核去启用内嵌的引导配置。 + +注意，即使你已经设置了此选项，仍可用附加到initrd的其他引导配置覆盖内嵌的引导 +配置。 + +通过引导配置传递内核参数 +======================== + +除了内核命令行，引导配置也可以用于传递内核参数。所有 ``kernel`` 关键字下的键 +值对都将直接传递给内核命令行。此外， ``init`` 下的键值对将通过命令行传递给 +init进程。参数按以下顺序与用户给定的内核命令行字符串相连，因此命令行参数可以 +覆盖引导配置参数（这取决于子系统如何处理参数，但通常前面的参数将被后面的参数 +覆盖）:: + + [bootconfig params][cmdline params] -- [bootconfig init params][cmdline init params] + +如果引导配置文件给出的kernel/init参数是:: + + kernel { + root = 01234567-89ab-cdef-0123-456789abcd + } + init { + splash + } + +这将被复制到内核命令行字符串中，如下所示:: + + root="01234567-89ab-cdef-0123-456789abcd" -- splash + +如果用户给出的其他命令行是:: + + ro bootconfig -- quiet + +则最后的内核命令行如下:: + + root="01234567-89ab-cdef-0123-456789abcd" ro bootconfig -- splash quiet + + +配置文件的限制 +============== + +当前最大的配置大小是32KB，关键字总数（不是键值条目）必须少于1024个节点。 +注意：这不是条目数而是节点数，条目必须消耗超过2个节点（一个关键字和一个值）。 +所以从理论上讲最多512个键值对。如果关键字平均包含3个单词，则可有256个键值对。 +在大多数情况下，配置项的数量将少于100个条目，小于8KB，因此这应该足够了。如果 +节点数超过1024，解析器将返回错误，即使文件大小小于32KB。（请注意，此最大尺寸 +不包括填充的空字符。） +无论如何，因为 ``bootconfig`` 命令在附加启动配置到initrd映像时会验证它，用户 +可以在引导之前注意到它。 + + +引导配置API +=========== + +用户可以查询或遍历键值对，也可以查找（前缀）根关键字节点，并在查找该节点下的 +键值。 + +如果您有一个关键字字符串，则可以直接使用 xbc_find_value() 查询该键的值。如果 +你想知道引导配置里有哪些关键字，可以使用 xbc_for_each_key_value() 迭代键值对。 +请注意，您需要使用 xbc_array_for_each_value() 访问数组的值，例如:: + + vnode = NULL; + xbc_find_value("key.word", &vnode); + if (vnode && xbc_node_is_array(vnode)) + xbc_array_for_each_value(vnode, value) { + printk("%s ", value); + } + +如果您想查找具有前缀字符串的键，可以使用 xbc_find_node() 通过前缀字符串查找 +节点，然后用 xbc_node_for_each_key_value() 迭代前缀节点下的键。 + +但最典型的用法是获取前缀下的命名值或前缀下的命名数组，例如:: + + root = xbc_find_node("key.prefix"); + value = xbc_node_find_value(root, "option", &vnode); + ... + xbc_node_for_each_array_value(root, "array-option", value, anode) { + ... + } + +这将访问值“key.prefix.option”的值和“key.prefix.array-option”的数组。 + +锁是不需要的，因为在初始化之后配置只读。如果需要修改，必须复制所有数据和关键字。 + + +函数与结构体 +============ + +相关定义的kernel-doc参见： + + - include/linux/bootconfig.h + - lib/bootconfig.c diff --git a/Documentation/translations/zh_CN/admin-guide/index.rst b/Documentation/translations/zh_CN/admin-guide/index.rst index 2f6970d0a032..ac2960da33e6 100644 --- a/Documentation/translations/zh_CN/admin-guide/index.rst +++ b/Documentation/translations/zh_CN/admin-guide/index.rst @@ -63,6 +63,7 @@ Todolist: .. toctree:: :maxdepth: 1 + bootconfig clearing-warn-once cpu-load cputopology @@ -80,7 +81,6 @@ Todolist: * binderfs * binfmt-misc * blockdev/index -* bootconfig * braille-console * btmrvl * cgroup-v1/index diff --git a/Documentation/translations/zh_CN/core-api/circular-buffers.rst b/Documentation/translations/zh_CN/core-api/circular-buffers.rst new file mode 100644 index 000000000000..694ad8e61070 --- /dev/null +++ b/Documentation/translations/zh_CN/core-api/circular-buffers.rst @@ -0,0 +1,210 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/core-api/circular-buffers.rst + +:翻译: + + 周彬彬 Binbin Zhou <zhoubinbin@loongson.cn> + +:校译: + + 司延腾 Yanteng Si <siyanteng@loongson.cn> + 吴想成 Wu Xiangcheng <bobwxc@email.cn> + 时奎亮 Alex Shi <alexs@kernel.org> + +========== +环形缓冲区 +========== + +:作者: David Howells <dhowells@redhat.com> +:作者: Paul E. McKenney <paulmck@linux.ibm.com> + + +Linux 提供了许多可用于实现循环缓冲的特性。有两组这样的特性： + + (1) 用于确定2次方大小的缓冲区信息的便利函数。 + + (2) 可以代替缓冲区中对象的生产者和消费者共享锁的内存屏障。 + +如下所述，要使用这些设施，只需要一个生产者和一个消费者。可以通过序列化来处理多个 +生产者，并通过序列化来处理多个消费者。 + +.. Contents: + + (*) 什么是环形缓冲区？ + + (*) 测量2次幂缓冲区 + + (*) 内存屏障与环形缓冲区的结合使用 + - 生产者 + - 消费者 + + (*) 延伸阅读 + + + +什么是环形缓冲区？ +================== + +首先，什么是环形缓冲区？环形缓冲区是具有固定的有限大小的缓冲区，它有两个索引： + + (1) 'head'索引 - 生产者将元素插入缓冲区的位置。 + + (2) 'tail'索引 - 消费者在缓冲区中找到下一个元素的位置。 + +通常，当tail指针等于head指针时，表明缓冲区是空的；而当head指针比tail指针少一个时， +表明缓冲区是满的。 + +添加元素时，递增head索引；删除元素时，递增tail索引。tail索引不应该跳过head索引， +两个索引在到达缓冲区末端时都应该被赋值为0，从而允许海量的数据流过缓冲区。 + +通常情况下，元素都有相同的单元大小，但这并不是使用以下技术的严格要求。如果要在缓 +冲区中包含多个元素或可变大小的元素，则索引可以增加超过1，前提是两个索引都没有超过 +另一个。然而，实现者必须小心，因为超过一个单位大小的区域可能会覆盖缓冲区的末端并 +且缓冲区会被分成两段。 + +测量2次幂缓冲区 +=============== + +计算任意大小的环形缓冲区的占用或剩余容量通常是一个费时的操作，需要使用模（除法） +指令。但是如果缓冲区的大小为2次幂，则可以使用更快的按位与指令代替。 + +Linux提供了一组用于处理2次幂环形缓冲区的宏。可以通过以下方式使用:: + + #include <linux/circ_buf.h> + +这些宏包括： + + (#) 测量缓冲区的剩余容量:: + + CIRC_SPACE(head_index, tail_index, buffer_size); + + 返回缓冲区[1]中可插入元素的剩余空间大小。 + + + (#) 测量缓冲区中的最大连续立即可用空间:: + + CIRC_SPACE_TO_END(head_index, tail_index, buffer_size); + + 返回缓冲区[1]中剩余的连续空间的大小，元素可以立即插入其中，而不必绕回到缓冲 + 区的开头。 + + + (#) 测量缓冲区的使用数:: + + CIRC_CNT(head_index, tail_index, buffer_size); + + 返回当前占用缓冲区[2]的元素数量。 + + + (#) 测量缓冲区的连续使用数:: + + CIRC_CNT_TO_END(head_index, tail_index, buffer_size); + + 返回可以从缓冲区中提取的连续元素[2]的数量，而不必绕回到缓冲区的开头。 + +这里的每一个宏名义上都会返回一个介于0和buffer_size-1之间的值，但是： + + (1) CIRC_SPACE*()是为了在生产者中使用。对生产者来说，它们将返回一个下限，因为生 + 产者控制着head索引，但消费者可能仍然在另一个CPU上耗尽缓冲区并移动tail索引。 + + 对消费者来说，它将显示一个上限，因为生产者可能正忙于耗尽空间。 + + (2) CIRC_CNT*()是为了在消费者中使用。对消费者来说，它们将返回一个下限，因为消费 + 者控制着tail索引，但生产者可能仍然在另一个CPU上填充缓冲区并移动head索引。 + + 对于生产者，它将显示一个上限，因为消费者可能正忙于清空缓冲区。 + + (3) 对于第三方来说，生产者和消费者对索引的写入顺序是无法保证的，因为它们是独立的， + 而且可能是在不同的CPU上进行的，所以在这种情况下的结果只是一种猜测，甚至可能 + 是错误的。 + +内存屏障与环形缓冲区的结合使用 +============================== + +通过将内存屏障与环形缓冲区结合使用，可以避免以下需求： + + (1) 使用单个锁来控制对缓冲区两端的访问，从而允许同时填充和清空缓冲区；以及 + + (2) 使用原子计数器操作。 + +这有两个方面：填充缓冲区的生产者和清空缓冲区的消费者。在任何时候，只应有一个生产 +者在填充缓冲区，同样的也只应有一个消费者在清空缓冲区，但双方可以同时操作。 + + +生产者 +------ + +生产者看起来像这样:: + + spin_lock(&producer_lock); + + unsigned long head = buffer->head; + /* spin_unlock()和下一个spin_lock()提供必要的排序。 */ + unsigned long tail = READ_ONCE(buffer->tail); + + if (CIRC_SPACE(head, tail, buffer->size) >= 1) { + /* 添加一个元素到缓冲区 */ + struct item *item = buffer[head]; + + produce_item(item); + + smp_store_release(buffer->head, + (head + 1) & (buffer->size - 1)); + + /* wake_up()将确保在唤醒任何人之前提交head */ + wake_up(consumer); + } + + spin_unlock(&producer_lock); + +这将表明CPU必须在head索引使其对消费者可用之前写入新项目的内容，同时CPU必须在唤醒 +消费者之前写入修改后的head索引。 + +请注意，wake_up()并不保证任何形式的屏障，除非确实唤醒了某些东西。因此我们不能依靠 +它来进行排序。但是数组中始终有一个元素留空，因此生产者必须产生两个元素，然后才可 +能破坏消费者当前正在读取的元素。同时，消费者连续调用之间成对的解锁-加锁提供了索引 +读取（指示消费者已清空给定元素）和生产者对该相同元素的写入之间的必要顺序。 + + +消费者 +------ + +消费者看起来像这样:: + + spin_lock(&consumer_lock); + + /* 读取该索引处的内容之前，先读取索引 */ + unsigned long head = smp_load_acquire(buffer->head); + unsigned long tail = buffer->tail; + + if (CIRC_CNT(head, tail, buffer->size) >= 1) { + + /* 从缓冲区中提取一个元素 */ + struct item *item = buffer[tail]; + + consume_item(item); + + /* 在递增tail之前完成对描述符的读取。 */ + smp_store_release(buffer->tail, + (tail + 1) & (buffer->size - 1)); + } + + spin_unlock(&consumer_lock); + +这表明CPU在读取新元素之前确保索引是最新的，然后在写入新的尾指针之前应确保CPU已完 +成读取该元素，这将擦除该元素。 + +请注意，使用READ_ONCE()和smp_load_acquire()来读取反向（head）索引。这可以防止编译 +器丢弃并重新加载其缓存值。如果您能确定反向（head）索引将仅使用一次，则这不是必须 +的。smp_load_acquire()还可以强制CPU对后续的内存引用进行排序。类似地，两种算法都使 +用smp_store_release()来写入线程的索引。这记录了我们正在写入可以并发读取的内容的事 +实，以防止编译器破坏存储，并强制对以前的访问进行排序。 + + +延伸阅读 +======== + +关于Linux的内存屏障设施的描述，请查看Documentation/memory-barriers.txt。 diff --git a/Documentation/translations/zh_CN/core-api/generic-radix-tree.rst b/Documentation/translations/zh_CN/core-api/generic-radix-tree.rst new file mode 100644 index 000000000000..eacd1d2ebddc --- /dev/null +++ b/Documentation/translations/zh_CN/core-api/generic-radix-tree.rst @@ -0,0 +1,23 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/core-api/generic-radix-tree.rst + +:翻译: + + 周彬彬 Binbin Zhou <zhoubinbin@loongson.cn> + +=================== +通用基数树/稀疏数组 +=================== + +通用基数树/稀疏数组的相关内容请见include/linux/generic-radix-tree.h文件中的 +“DOC: Generic radix trees/sparse arrays”。 + +通用基数树函数 +-------------- + +该API在以下内核代码中: + +include/linux/generic-radix-tree.h diff --git a/Documentation/translations/zh_CN/core-api/idr.rst b/Documentation/translations/zh_CN/core-api/idr.rst new file mode 100644 index 000000000000..97a16e76b81b --- /dev/null +++ b/Documentation/translations/zh_CN/core-api/idr.rst @@ -0,0 +1,80 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/core-api/idr.rst + +:翻译: + + 周彬彬 Binbin Zhou <zhoubinbin@loongson.cn> + +:校译: + + 司延腾 Yanteng Si <siyanteng@loongson.cn> + 吴想成 Wu Xiangcheng <bobwxc@email.cn> + 时奎亮 Alex Shi <alexs@kernel.org> + +====== +ID分配 +====== + +:作者: Matthew Wilcox + +概述 +==== + +要解决的一个常见问题是分配标识符（IDs）；它通常是标识事物的数字。比如包括文件描述 +符、进程ID、网络协议中的数据包标识符、SCSI标记和设备实例编号。IDR和IDA为这个问题 +提供了一个合理的解决方案，以避免每个人都自创。IDR提供将ID映射到指针的能力，而IDA +仅提供ID分配，因此内存效率更高。 + +IDR接口已经被废弃，请使用 ``XArray`` 。 + +IDR的用法 +========= + +首先初始化一个IDR，对于静态分配的IDR使用DEFINE_IDR()，或者对于动态分配的IDR使用 +idr_init()。 + +您可以调用idr_alloc()来分配一个未使用的ID。通过调用idr_find()查询与该ID相关的指针， +并通过调用idr_remove()释放该ID。 + +如果需要更改与一个ID相关联的指针，可以调用idr_replace()。这样做的一个常见原因是通 +过将 ``NULL`` 指针传递给分配函数来保留ID；用保留的ID初始化对象，最后将初始化的对 +象插入IDR。 + +一些用户需要分配大于 ``INT_MAX`` 的ID。到目前为止，所有这些用户都满足 ``UINT_MAX`` +的限制，他们使用idr_alloc_u32()。如果您需要超出u32的ID，我们将与您合作以满足您的 +需求。 + +如果需要按顺序分配ID，可以使用idr_alloc_cyclic()。处理较大数量的ID时，IDR的效率会 +降低，所以使用这个函数会有一点代价。 + +要对IDR使用的所有指针进行操作，您可以使用基于回调的idr_for_each()或迭代器样式的 +idr_for_each_entry()。您可能需要使用idr_for_each_entry_continue()来继续迭代。如果 +迭代器不符合您的需求，您也可以使用idr_get_next()。 + +当使用完IDR后，您可以调用idr_destroy()来释放IDR占用的内存。这并不会释放IDR指向的 +对象；如果您想这样做，请使用其中一个迭代器来执行此操作。 + +您可以使用idr_is_empty()来查看当前是否分配了任何ID。 + +如果在从IDR分配一个新ID时需要带锁，您可能需要传递一组限制性的GFP标志，但这可能导 +致IDR无法分配内存。为了解决该问题，您可以在获取锁之前调用idr_preload()，然后在分 +配之后调用idr_preload_end()。 + +IDR同步的相关内容请见include/linux/idr.h文件中的“DOC: idr sync”。 + +IDA的用法 +========= + +IDA的用法的相关内容请见lib/idr.c文件中的“DOC: IDA description”。 + +函数和数据结构 +============== + +该API在以下内核代码中: + +include/linux/idr.h + +lib/idr.c diff --git a/Documentation/translations/zh_CN/core-api/index.rst b/Documentation/translations/zh_CN/core-api/index.rst index 8a94ad87465d..37756d240b5e 100644 --- a/Documentation/translations/zh_CN/core-api/index.rst +++ b/Documentation/translations/zh_CN/core-api/index.rst @@ -44,15 +44,15 @@ assoc_array xarray rbtree + idr + circular-buffers + generic-radix-tree + packing Todolist: - idr - circular-buffers - generic-radix-tree - packing this_cpu_ops timekeeping errseq diff --git a/Documentation/translations/zh_CN/core-api/packing.rst b/Documentation/translations/zh_CN/core-api/packing.rst new file mode 100644 index 000000000000..c0aab3a349d0 --- /dev/null +++ b/Documentation/translations/zh_CN/core-api/packing.rst @@ -0,0 +1,160 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/core-api/packing.rst + +:翻译: + + 周彬彬 Binbin Zhou <zhoubinbin@loongson.cn> + +:校译: + + 司延腾 Yanteng Si <siyanteng@loongson.cn> + 吴想成 Wu Xiangcheng <bobwxc@email.cn> + 时奎亮 Alex Shi <alexs@kernel.org> + +======================== +通用的位域打包和解包函数 +======================== + +问题陈述 +-------- + +使用硬件时，必须在几种与其交互的方法之间进行选择。 + +可以将指针映射到在硬件设备的内存区上精心设计的结构体，并将其字段作为结构成员（可 +能声明为位域）访问。但是由于CPU和硬件设备之间潜在的字节顺序不匹配，以这种方式编写 +代码会降低其可移植性。 + +此外，必须密切注意将硬件文档中的寄存器定义转换为结构的位域索引。此外，一些硬件 +（通常是网络设备）倾向于以违反任何合理字边界（有时甚至是64位）的方式对其寄存器字 +段进行分组。这就造成了不得不在结构中定义寄存器字段的“高”和“低”部分的不便。 + +结构域定义的更可靠的替代方法是通过移动适当数量的位来提取所需的字段。但这仍然不能 +防止字节顺序不匹配，除非所有内存访问都是逐字节执行的。此外，代码很容易变得杂乱无 +章，同时可能会在所需的许多位移操作中丢失一些高层次的想法。 + +许多驱动程序采用了位移的方法，然后试图用定制的宏来减少杂乱无章的东西，但更多的时 +候，这些宏所采用的捷径依旧妨碍了代码真正的可移植性。 + +解决方案 +-------- + +该API涉及2个基本操作： + + - 将一个CPU可使用的数字打包到内存缓冲区中（具有硬件约束/特殊性）。 + - 将内存缓冲区（具有硬件约束/特殊性）解压缩为一个CPU可使用的数字。 + +该API提供了对所述硬件约束和特殊性以及CPU字节序的抽象，因此这两者之间可能不匹配。 + +这些API函数的基本单元是u64。从CPU的角度来看，位63总是意味着字节7的位偏移量7，尽管 +只是逻辑上的。问题是：我们将这个比特放在内存的什么位置？ + +以下示例介绍了打包u64字段的内存布局。打包缓冲区中的字节偏移量始终默认为0，1...7。 +示例显示的是逻辑字节和位所在的位置。 + +1. 通常情况下（无特殊性），我们会这样做： + +:: + + 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 + 7 6 5 4 + 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 + 3 2 1 0 + +也就是说，CPU可使用的u64的MSByte(7)位于内存偏移量0处，而u64的LSByte(0)位于内存偏移量7处。 + +这对应于大多数人认为的“大端”，其中位i对应于数字2^i。这在代码注释中也称为“逻辑”符号。 + + +2. 如果设置了QUIRK_MSB_ON_THE_RIGHT，我们按如下方式操作： + +:: + + 56 57 58 59 60 61 62 63 48 49 50 51 52 53 54 55 40 41 42 43 44 45 46 47 32 33 34 35 36 37 38 39 + 7 6 5 4 + 24 25 26 27 28 29 30 31 16 17 18 19 20 21 22 23 8 9 10 11 12 13 14 15 0 1 2 3 4 5 6 7 + 3 2 1 0 + +也就是说，QUIRK_MSB_ON_THE_RIGHT不会影响字节定位，但会反转字节内的位偏移量。 + + +3. 如果设置了QUIRK_LITTLE_ENDIAN，我们按如下方式操作： + +:: + + 39 38 37 36 35 34 33 32 47 46 45 44 43 42 41 40 55 54 53 52 51 50 49 48 63 62 61 60 59 58 57 56 + 4 5 6 7 + 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24 + 0 1 2 3 + +因此，QUIRK_LITTLE_ENDIAN意味着在内存区域内，每个4字节的字的每个字节都被放置在与 +该字的边界相比的镜像位置。 + + +4. 如果设置了QUIRK_MSB_ON_THE_RIGHT和QUIRK_LITTLE_ENDIAN，我们这样做： + +:: + + 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 + 4 5 6 7 + 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 + 0 1 2 3 + + +5. 如果只设置了QUIRK_LSW32_IS_FIRST，我们这样做： + +:: + + 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 + 3 2 1 0 + 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 + 7 6 5 4 + +在这种情况下，8字节内存区域解释如下：前4字节对应最不重要的4字节的字，后4字节对应 +更重要的4字节的字。 + +6. 如果设置了QUIRK_LSW32_IS_FIRST和QUIRK_MSB_ON_THE_RIGHT，我们这样做： + +:: + + 24 25 26 27 28 29 30 31 16 17 18 19 20 21 22 23 8 9 10 11 12 13 14 15 0 1 2 3 4 5 6 7 + 3 2 1 0 + 56 57 58 59 60 61 62 63 48 49 50 51 52 53 54 55 40 41 42 43 44 45 46 47 32 33 34 35 36 37 38 39 + 7 6 5 4 + + +7. 如果设置了QUIRK_LSW32_IS_FIRST和QUIRK_LITTLE_ENDIAN，则如下所示： + +:: + + 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24 + 0 1 2 3 + 39 38 37 36 35 34 33 32 47 46 45 44 43 42 41 40 55 54 53 52 51 50 49 48 63 62 61 60 59 58 57 56 + 4 5 6 7 + + +8. 如果设置了QUIRK_LSW32_IS_FIRST，QUIRK_LITTLE_ENDIAN和QUIRK_MSB_ON_THE_RIGHT， + 则如下所示： + +:: + + 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 + 0 1 2 3 + 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 + 4 5 6 7 + + +我们总是认为我们的偏移量好像没有特殊性，然后在访问内存区域之前翻译它们。 + +预期用途 +-------- + +选择使用该API的驱动程序首先需要确定上述3种quirk组合（共8种）中的哪一种与硬件文档 +中描述的相匹配。然后，他们应该封装packing()函数，创建一个新的xxx_packing()，使用 +适当的QUIRK_* one-hot 位集合来调用它。 + +packing()函数返回一个int类型的错误码，以防止程序员使用不正确的API。这些错误预计不 +会在运行时发生，因此xxx_packing()返回void并简单地接受这些错误是合理的。它可以选择 +转储栈或打印错误描述。 diff --git a/Documentation/translations/zh_CN/devicetree/changesets.rst b/Documentation/translations/zh_CN/devicetree/changesets.rst new file mode 100644 index 000000000000..2ace05f3c377 --- /dev/null +++ b/Documentation/translations/zh_CN/devicetree/changesets.rst @@ -0,0 +1,37 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/Devicetree/changesets.rst + +:翻译: + + 司延腾 Yanteng Si <siyanteng@loongson.cn> + +:校译: + + +============ +设备树变更集 +============ + +设备树变更集是一种方法，它允许人们以这样一种方式在实时树中使用变化，即要么使用全部的 +变化，要么不使用。如果在使用变更集的过程中发生错误，那么树将被回滚到之前的状态。一个 +变更集也可以在使用后被删除。 + +当一个变更集被使用时，所有的改变在发出OF_RECONFIG通知器之前被一次性使用到树上。这是 +为了让接收者在收到通知时看到一个完整的、一致的树的状态。 + +一个变化集的顺序如下。 + +1. of_changeset_init() - 初始化一个变更集。 + +2. 一些DT树变化的调用，of_changeset_attach_node(), of_changeset_detach_node(), + of_changeset_add_property(), of_changeset_remove_property, + of_changeset_update_property()来准备一组变更。此时不会对活动树做任何变更。所有 + 的变更操作都记录在of_changeset的 `entries` 列表中。 + +3. of_changeset_apply() - 将变更使用到树上。要么整个变更集被使用，要么如果有错误， + 树会被恢复到之前的状态。核心通过锁确保正确的顺序。如果需要的话，可以使用一个解锁的 + __of_changeset_apply版本。 + +如果一个成功使用的变更集需要被删除，可以用of_changeset_revert()来完成。 diff --git a/Documentation/translations/zh_CN/devicetree/dynamic-resolution-notes.rst b/Documentation/translations/zh_CN/devicetree/dynamic-resolution-notes.rst new file mode 100644 index 000000000000..115190341305 --- /dev/null +++ b/Documentation/translations/zh_CN/devicetree/dynamic-resolution-notes.rst @@ -0,0 +1,31 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/Devicetree/dynamic-resolution-notes.rst + +:翻译: + + 司延腾 Yanteng Si <siyanteng@loongson.cn> + +:校译: + +======================== +Devicetree动态解析器说明 +======================== + +本文描述了内核内DeviceTree解析器的实现，它位于drivers/of/resolver.c中。 + +解析器如何工作？ +---------------- + +解析器被赋予一个任意的树作为输入，该树用适当的dtc选项编译，并有一个/plugin/标签。这就产 +生了适当的__fixups__和__local_fixups__节点。 + +解析器依次通过以下步骤工作: + +1. 从实时树中获取最大的设备树phandle值 + 1. +2. 调整树的所有本地 phandles，以解决这个量。 +3. 使用 __local__fixups__ 节点信息以相同的量调整所有本地引用。 +4. 对于__fixups__节点中的每个属性，找到它在实时树中引用的节点。这是用来标记该节点的标签。 +5. 检索fixup的目标的phandle。 +6. 对于属性中的每个fixup，找到节点:属性:偏移的位置，并用phandle值替换它。 diff --git a/Documentation/translations/zh_CN/devicetree/index.rst b/Documentation/translations/zh_CN/devicetree/index.rst index 3fc355fe0037..7451dbfdd3e5 100644 --- a/Documentation/translations/zh_CN/devicetree/index.rst +++ b/Documentation/translations/zh_CN/devicetree/index.rst @@ -24,21 +24,16 @@ Open Firmware 和 Devicetree usage-model of_unittest - -Todolist: - -* kernel-api + kernel-api Devicetree Overlays =================== .. toctree:: :maxdepth: 1 -Todolist: - -* changesets -* dynamic-resolution-notes -* overlay-notes + changesets + dynamic-resolution-notes + overlay-notes Devicetree Bindings =================== diff --git a/Documentation/translations/zh_CN/devicetree/kernel-api.rst b/Documentation/translations/zh_CN/devicetree/kernel-api.rst new file mode 100644 index 000000000000..6aa3b685494e --- /dev/null +++ b/Documentation/translations/zh_CN/devicetree/kernel-api.rst @@ -0,0 +1,58 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/Devicetree/kernel-api.rst + +:翻译: + + 司延腾 Yanteng Si <siyanteng@loongson.cn> + +:校译: + + +================= +内核中的设备树API +================= + +核心函数 +-------- + +该API在以下内核代码中: + +drivers/of/base.c + +include/linux/of.h + +drivers/of/property.c + +include/linux/of_graph.h + +drivers/of/address.c + +drivers/of/irq.c + +drivers/of/fdt.c + +驱动模型函数 +------------ + +该API在以下内核代码中: + +include/linux/of_device.h + +drivers/of/device.c + +include/linux/of_platform.h + +drivers/of/platform.c + +覆盖和动态DT函数 +---------------- + +该API在以下内核代码中: + +drivers/of/resolver.c + +drivers/of/dynamic.c + +drivers/of/overlay.c diff --git a/Documentation/translations/zh_CN/devicetree/overlay-notes.rst b/Documentation/translations/zh_CN/devicetree/overlay-notes.rst new file mode 100644 index 000000000000..1bd482cb0a1b --- /dev/null +++ b/Documentation/translations/zh_CN/devicetree/overlay-notes.rst @@ -0,0 +1,140 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/Devicetree/overlay-notes.rst + +:翻译: + + 司延腾 Yanteng Si <siyanteng@loongson.cn> + +:校译: + +============== +设备树覆盖说明 +============== + +本文档描述了drivers/of/overlay.c中的内核内设备树覆盖功能的实现，是 +Documentation/devicetree/dynamic-resolution-notes.rst[1]的配套文档。 + +覆盖如何工作 +------------ + +设备树覆盖的目的是修改内核的实时树，并使修改以反映变化的方式影响内核的状态。 +由于内核主要处理的是设备，任何新的设备节点如果导致一个活动的设备，就应该创建它， +而如果设备节点被禁用或被全部删除，受影响的设备应该被取消注册。 + +让我们举个例子，我们有一个foo板，它的基本树形图如下:: + + ---- foo.dts --------------------------------------------------------------- + /* FOO平台 */ + /dts-v1/; + / { + compatible = "corp,foo"; + + /* 共享的资源 */ + res: res { + }; + + /* 芯片上的外围设备 */ + ocp: ocp { + /* 总是被实例化的外围设备 */ + peripheral1 { ... }; + }; + }; + ---- foo.dts --------------------------------------------------------------- + +覆盖bar.dts, +:: + + ---- bar.dts - 按标签覆盖目标位置 ---------------------------- + /dts-v1/; + /插件/; + &ocp { + /* bar外围 */ + bar { + compatible = "corp,bar"; + ... /* 各种属性和子节点 */ + }; + }; + ---- bar.dts --------------------------------------------------------------- + +当加载（并按照[1]中描述的方式解决）时，应该产生foo+bar.dts:: + + ---- foo+bar.dts ----------------------------------------------------------- + /* FOO平台 + bar外围 */ + / { + compatible = "corp,foo"; + + /* 共享资源 */ + res: res { + }; + + /* 芯片上的外围设备 */ + ocp: ocp { + /* 总是被实例化的外围设备 */ + peripheral1 { ... }; + + /* bar外围 */ + bar { + compatible = "corp,bar"; + ... /* 各种属性和子节点 */ + }; + }; + }; + ---- foo+bar.dts ----------------------------------------------------------- + +作为覆盖的结果，已经创建了一个新的设备节点（bar），因此将注册一个bar平台设备， +如果加载了匹配的设备驱动程序，将按预期创建设备。 + +如果基础DT不是用-@选项编译的，那么“&ocp”标签将不能用于将覆盖节点解析到基础 +DT中的适当位置。在这种情况下，可以提供目标路径。通过标签的目标位置的语法是比 +较好的，因为不管标签在DT中出现在哪里，覆盖都可以被应用到任何包含标签的基础DT上。 + +上面的bar.dts例子被修改为使用目标路径语法，即为:: + + ---- bar.dts - 通过明确的路径覆盖目标位置 -------------------- + /dts-v1/; + /插件/; + &{/ocp} { + /* bar外围 */ + bar { + compatible = "corp,bar"; + ... /* 各种外围设备和子节点 */ + } + }; + ---- bar.dts --------------------------------------------------------------- + + +内核中关于覆盖的API +------------------- + +该API相当容易使用。 + +1) 调用of_overlay_fdt_apply()来创建和应用一个覆盖的变更集。返回值是一个 + 错误或一个识别这个覆盖的cookie。 + +2) 调用of_overlay_remove()来删除和清理先前通过调用of_overlay_fdt_apply() + 而创建的覆盖变更集。不允许删除一个被另一个覆盖的覆盖变化集。 + +最后，如果你需要一次性删除所有的覆盖，只需调用of_overlay_remove_all()， +它将以正确的顺序删除每一个覆盖。 + +你可以选择注册在覆盖操作中被调用的通知器。详见 +of_overlay_notifier_register/unregister和enum of_overlay_notify_action。 + +OF_OVERLAY_PRE_APPLY、OF_OVERLAY_POST_APPLY或OF_OVERLAY_PRE_REMOVE +的通知器回调可以存储指向覆盖层中的设备树节点或其内容的指针，但这些指针不能持 +续到OF_OVERLAY_POST_REMOVE的通知器回调。在OF_OVERLAY_POST_REMOVE通 +知器被调用后，包含覆盖层的内存将被kfree()ed。请注意，即使OF_OVERLAY_POST_REMOVE +的通知器返回错误，内存也会被kfree()ed。 + +drivers/of/dynamic.c中的变更集通知器是第二种类型的通知器，可以通过应用或移除 +覆盖层来触发。这些通知器不允许在覆盖层或其内容中存储指向设备树节点的指针。当包含 +覆盖层的内存因移除覆盖层而被释放时，覆盖层代码并不能防止这类指针仍然有效。 + +任何其他保留指向覆盖层节点或数据的指针的代码都被认为是一个错误，因为在移除覆盖层 +后，该指针将指向已释放的内存。 + +覆盖层的用户必须特别注意系统上发生的整体操作，以确保其他内核代码不保留任何指向覆 +盖层节点或数据的指针。任何无意中使用这种指针的例子是，如果一个驱动或子系统模块在 +应用了覆盖后被加载，并且该驱动或子系统扫描了整个设备树或其大部分，包括覆盖节点。 diff --git a/Documentation/translations/zh_CN/driver-api/gpio/index.rst b/Documentation/translations/zh_CN/driver-api/gpio/index.rst new file mode 100644 index 000000000000..9ab64e94aced --- /dev/null +++ b/Documentation/translations/zh_CN/driver-api/gpio/index.rst @@ -0,0 +1,69 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. include:: ../../disclaimer-zh_CN.rst + +:Original: Documentation/driver-api/gpio/index.rst + +:翻译: + + 司延腾 Yanteng Si <siyanteng@loongson.cn> + +:校译: + +======================= +通用型输入/输出（GPIO） +======================= + +目录: + +.. toctree:: + :maxdepth: 2 + + legacy + +Todolist: + +* intro +* using-gpio +* driver +* consumer +* board +* drivers-on-gpio +* bt8xxgpio + +核心 +==== + +该API在以下内核代码中: + +include/linux/gpio/driver.h + +drivers/gpio/gpiolib.c + +ACPI支持 +======== + +该API在以下内核代码中: + +drivers/gpio/gpiolib-acpi.c + +设备树支持 +========== + +该API在以下内核代码中: + +drivers/gpio/gpiolib-of.c + +设备管理支持 +============ + +该API在以下内核代码中: + +drivers/gpio/gpiolib-devres.c + +sysfs帮助（函数） +================= + +该API在以下内核代码中: + +drivers/gpio/gpiolib-sysfs.c diff --git a/Documentation/translations/zh_CN/gpio.txt b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst index a23ee14fc927..6399521d0548 100644 --- a/Documentation/translations/zh_CN/gpio.txt +++ b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst @@ -1,39 +1,28 @@ -Chinese translated version of Documentation/admin-guide/gpio +.. SPDX-License-Identifier: GPL-2.0 -If you have any comment or update to the content, please contact the -original document maintainer directly. However, if you have a problem -communicating in English you can also ask the Chinese maintainer for -help. Contact the Chinese maintainer if this translation is outdated -or if there is a problem with the translation. +.. include:: ../../disclaimer-zh_CN.rst -Maintainer: Grant Likely <grant.likely@secretlab.ca> - Linus Walleij <linus.walleij@linaro.org> -Chinese maintainer: Fu Wei <tekkamanninja@gmail.com> ---------------------------------------------------------------------- -Documentation/admin-guide/gpio 的中文翻译 +:Original: Documentation/driver-api/gpio/legacy.rst -如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文 -交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻 -译存在问题，请联系中文版维护者。 -英文版维护者： Grant Likely <grant.likely@secretlab.ca> - Linus Walleij <linus.walleij@linaro.org> -中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com> -中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com> -中文版校译者： 傅炜 Fu Wei <tekkamanninja@gmail.com> +:翻译: + 傅炜 Fu Wei <tekkamanninja@gmail.com> + 司延腾 Yanteng Si <siyanteng@loongson.cn> -以下为正文 ---------------------------------------------------------------------- -GPIO 接口 +:校译: -本文档提供了一个在Linux下访问GPIO的公约概述。 + +传统GPIO接口 +============ + +本文档概述了Linux下的GPIO访问公约。 这些函数以 gpio_* 作为前缀。其他的函数不允许使用这样的前缀或相关的 __gpio_* 前缀。 -什么是GPIO? -========== +什么是GPIO？ +============ "通用输入/输出口"(GPIO)是一个灵活的由软件控制的数字信号。他们可 由多种芯片提供,且对于从事嵌入式和定制硬件的 Linux 开发者来说是 比较熟悉。每个GPIO 都代表一个连接到特定引脚或球栅阵列(BGA)封装中 @@ -99,6 +88,7 @@ GPIO 公约 标识 GPIO --------- + GPIO 是通过无符号整型来标识的,范围是 0 到 MAX_INT。保留“负”数 用于其他目的,例如标识信号“在这个板子上不可用”或指示错误。未接触底层 硬件的代码会忽略这些整数。 @@ -115,7 +105,7 @@ FPGA 的特定板子上使用 80-95。编号不一定要连续,那些平台中 如果你要初始化一个带有无效 GPIO 编号的结构体,可以使用一些负编码 (如"-EINVAL")，那将使其永远不会是有效。来测试这样一个结构体中的编号 -是否关联一个 GPIO，你可使用以下断言: +是否关联一个 GPIO，你可使用以下断言:: int gpio_is_valid(int number); @@ -128,11 +118,12 @@ FPGA 的特定板子上使用 80-95。编号不一定要连续,那些平台中 使用 GPIO --------- + 对于一个 GPIO，系统应该做的第一件事情就是通过 gpio_request() 函数分配它，见下文。 接下来是设置I/O方向，这通常是在板级启动代码中为所使用的 GPIO 设置 -platform_device 时完成。 +platform_device 时完成:: /* 设置为输入或输出, 返回 0 或负的错误代码 */ int gpio_direction_input(unsigned gpio); @@ -157,12 +148,13 @@ get/set(获取/设置)函数调用没法返回错误,且有可能是配置错误 访问自旋锁安全的 GPIO -------------------- +--------------------- + 大多数 GPIO 控制器可以通过内存读/写指令来访问。这些指令不会休眠,可以 安全地在硬(非线程)中断例程和类似的上下文中完成。 对于那些用 gpio_cansleep()测试总是返回失败的 GPIO(见下文)，使用 -以下的函数访问: +以下的函数访问:: /* GPIO 输入:返回零或非零 */ int gpio_get_value(unsigned gpio); @@ -188,17 +180,18 @@ GPIO值是布尔值，零表示低电平，非零表示高电平。当读取一 访问可能休眠的 GPIO ------------------ +------------------- + 某些 GPIO 控制器必须通过基于总线(如 I2C 或 SPI)的消息访问。读或写这些 GPIO 值的命令需要等待其信息排到队首才发送命令，再获得其反馈。期间需要 休眠，这不能在 IRQ 例程(中断上下文)中执行。 支持此类 GPIO 的平台通过以下函数返回非零值来区分出这种 GPIO。(此函数需要 -一个之前通过 gpio_request 分配到的有效 GPIO 编号): +一个之前通过 gpio_request 分配到的有效 GPIO 编号):: int gpio_cansleep(unsigned gpio); -为了访问这种 GPIO,内核定义了一套不同的函数: +为了访问这种 GPIO,内核定义了一套不同的函数:: /* GPIO 输入:返回零或非零 ,可能会休眠 */ int gpio_get_value_cansleep(unsigned gpio); @@ -214,25 +207,26 @@ GPIO 值的命令需要等待其信息排到队首才发送命令，再获得其 事实，这些处理例程实际上和自旋锁安全的函数是一样的。 ** 除此之外 ** 调用设置和配置此类 GPIO 的函数也必须在允许休眠的上下文中， -因为它们可能也需要访问 GPIO 控制器芯片: (这些设置函数通常在板级启动代码或者 -驱动探测/断开代码中，所以这是一个容易满足的约束条件。) +因为它们可能也需要访问 GPIO 控制器芯片 (这些设置函数通常在板级启动代码或者 +驱动探测/断开代码中，所以这是一个容易满足的约束条件。) :: - gpio_direction_input() - gpio_direction_output() - gpio_request() + gpio_direction_input() + gpio_direction_output() + gpio_request() -## gpio_request_one() -## gpio_request_array() -## gpio_free_array() + ## gpio_request_one() + ## gpio_request_array() + ## gpio_free_array() - gpio_free() - gpio_set_debounce() + gpio_free() + gpio_set_debounce() 声明和释放 GPIO ----------------------------- -为了有助于捕获系统配置错误,定义了两个函数。 +---------------- + +为了有助于捕获系统配置错误,定义了两个函数:: /* 申请 GPIO, 返回 0 或负的错误代码. * 非空标签可能有助于诊断. @@ -256,9 +250,9 @@ GPIO 值的命令需要等待其信息排到队首才发送命令，再获得其 某些平台可能也使用 GPIO 作为电源管理激活信号(例如通过关闭未使用芯片区和 简单地关闭未使用时钟)。 -对于 GPIO 使用 pinctrl 子系统已知的引脚，子系统应该被告知其使用情况； +对于 GPIO 使用引脚控制子系统已知的引脚，子系统应该被告知其使用情况； 一个 gpiolib 驱动的 .request()操作应调用 pinctrl_gpio_request()， -而 gpiolib 驱动的 .free()操作应调用 pinctrl_gpio_free()。pinctrl +而 gpiolib 驱动的 .free()操作应调用 pinctrl_gpio_free()。引脚控制 子系统允许 pinctrl_gpio_request()在某个引脚或引脚组以复用形式“属于” 一个设备时都成功返回。 @@ -270,7 +264,7 @@ GPIO 值的命令需要等待其信息排到队首才发送命令，再获得其 某些平台允许部分或所有 GPIO 信号使用不同的引脚。类似的，GPIO 或引脚的 其他方面也需要配置，如上拉/下拉。平台软件应该在对这些 GPIO 调用 -gpio_request()前将这类细节配置好，例如使用 pinctrl 子系统的映射表， +gpio_request()前将这类细节配置好，例如使用引脚控制子系统的映射表， 使得 GPIO 的用户无须关注这些细节。 还有一个值得注意的是在释放 GPIO 前，你必须停止使用它。 @@ -278,7 +272,7 @@ gpio_request()前将这类细节配置好，例如使用 pinctrl 子系统的映 注意:申请一个 GPIO 并没有以任何方式配置它，只不过标识那个 GPIO 处于使用 状态。必须有另外的代码来处理引脚配置(如控制 GPIO 使用的引脚、上拉/下拉)。 -考虑到大多数情况下声明 GPIO 之后就会立即配置它们,所以定义了以下三个辅助函数: +考虑到大多数情况下声明 GPIO 之后就会立即配置它们,所以定义了以下三个辅助函数:: /* 申请一个 GPIO 信号, 同时通过特定的'flags'初始化配置, * 其他和 gpio_request()的参数和返回值相同 @@ -326,7 +320,7 @@ gpio_request()前将这类细节配置好，例如使用 pinctrl 子系统的映 将来这些标志可能扩展到支持更多的属性。 更进一步,为了更简单地声明/释放多个 GPIO,'struct gpio'被引进来封装所有 -这三个领域: +这三个领域:: struct gpio { unsigned gpio; @@ -334,7 +328,7 @@ gpio_request()前将这类细节配置好，例如使用 pinctrl 子系统的映 const char *label; }; -一个典型的用例: +一个典型的用例:: static struct gpio leds_gpios[] = { { 32, GPIOF_OUT_INIT_HIGH, "Power LED" }, /* 默认开启 */ @@ -356,9 +350,10 @@ gpio_request()前将这类细节配置好，例如使用 pinctrl 子系统的映 GPIO 映射到 IRQ --------------------- +---------------- + GPIO 编号是无符号整数;IRQ 编号也是。这些构成了两个逻辑上不同的命名空间 -(GPIO 0 不一定使用 IRQ 0)。你可以通过以下函数在它们之间实现映射: +(GPIO 0 不一定使用 IRQ 0)。你可以通过以下函数在它们之间实现映射:: /* 映射 GPIO 编号到 IRQ 编号 */ int gpio_to_irq(unsigned gpio); @@ -384,7 +379,8 @@ irq_to_gpio()返回的非错误值大多数通常可以被 gpio_get_value()所 模拟开漏信号 ----------------------------- +------------ + 有时在只有低电平信号作为实际驱动结果(译者注:多个输出连接于一点，逻辑电平 结果为所有输出的逻辑与)的时候,共享的信号线需要使用“开漏”信号。(该术语 适用于 CMOS 管；而 TTL 用“集电极开路”。)一个上拉电阻使信号为高电平。这 @@ -408,9 +404,44 @@ irq_to_gpio()返回的非错误值大多数通常可以被 gpio_get_value()所 这不一定是错误的。一个常见的例子就是 I2C 时钟的延长：一个需要较慢时钟的 从设备延迟 SCK 的上升沿，而 I2C 主设备相应地调整其信号传输速率。 +GPIO控制器和引脚控制子系统 +-------------------------- + +SOC上的GPIO控制器可能与引脚控制子系统紧密结合，即引脚可以与可选的gpio功 +能一起被其他功能使用。我们已经涵盖了这样的情况，例如一个GPIO控制器需要保 +留一个引脚或通过调用以下任何一个引脚来设置其方向:: + + pinctrl_gpio_request() + pinctrl_gpio_free() + pinctrl_gpio_direction_input() + pinctrl_gpio_direction_output() + +但是，引脚控制子系统是如何将GPIO号码（这是一个全局事项）与某个引脚控制器 +上的某个引脚交叉关联的？ + +这是通过注册引脚的“范围”来实现的，这基本上是交叉参考表。这些描述是在 +Documentation/driver-api/pin-control.rst + +虽然引脚分配完全由引脚控制子系统管理，但gpio（在gpiolib下）仍由gpio驱动 +维护。可能发生的情况是，SoC中的不同引脚范围由不同的gpio驱动器管理。 + +这使得在调用 "pinctrl_gpio_request" 之前，让gpio驱动向pin ctrl子系 +统宣布它们的引脚范围是合理的，以便在使用任何gpio之前要求引脚控制子系统准 +备相应的引脚。 + +为此，gpio控制器可以用引脚控制子系统注册其引脚范围。目前有两种方法：有或 +无DT。 + +关于对DT的支持，请参考 Documentation/devicetree/bindings/gpio/gpio.txt. + +对于非DT支持，用户可以用适当的参数调用gpiochip_add_pin_range()，将一 +系列的gpio引脚注册到引脚控制驱动上。为此，必须将引脚控制设备的名称字符串 +作为参数之一传给这个程序。 + + +这些公约忽略了什么？ +==================== -这些公约忽略了什么? -================ 这些公约忽略的最大一件事就是引脚复用，因为这属于高度芯片特定的属性且 没有可移植性。某个平台可能不需要明确的复用信息；有的对于任意给定的引脚 可能只有两个功能选项；有的可能每个引脚有八个功能选项；有的可能可以将 @@ -433,8 +464,9 @@ Linux 的系统。) 当前，动态定义 GPIO 并不是标准的，例如作为配置一个带有某些 GPIO 扩展器的 附加电路板的副作用。 -GPIO 实现者的框架 (可选) -===================== +GPIO 实现者的框架（可选） +========================= + 前面提到了，有一个可选的实现框架，让平台使用相同的编程接口，更加简单地支持 不同种类的 GPIO 控制器。这个框架称为"gpiolib"。 @@ -444,15 +476,16 @@ GPIO 实现者的框架 (可选) 控制器驱动: gpio_chip -------------------- +--------------------- + 在框架中每个 GPIO 控制器都包装为一个 "struct gpio_chip"，他包含了 该类型的每个控制器的常用信息: - - 设置 GPIO 方向的方法 - - 用于访问 GPIO 值的方法 - - 告知调用其方法是否可能休眠的标志 - - 可选的 debugfs 信息导出方法 (显示类似上拉配置一样的额外状态) - - 诊断标签 + - 设置 GPIO 方向的方法 + - 用于访问 GPIO 值的方法 + - 告知调用其方法是否可能休眠的标志 + - 可选的 debugfs 信息导出方法 (显示类似上拉配置一样的额外状态) + - 诊断标签 也包含了来自 device.platform_data 的每个实例的数据：它第一个 GPIO 的 编号和它可用的 GPIO 的数量。 @@ -471,7 +504,8 @@ GPIO 实现者的框架 (可选) 平台支持 -------- +-------- + 为了支持这个框架，一个平台的 Kconfig 文件将会 "select"(选择) ARCH_REQUIRE_GPIOLIB 或 ARCH_WANT_OPTIONAL_GPIOLIB，并让它的 <asm/gpio.h> 包含 <asm-generic/gpio.h>，同时定义三个方法: @@ -489,7 +523,7 @@ ARCH_WANT_OPTIONAL_GPIOLIB 意味着 gpiolib 核心默认关闭,且用户可以 如果这些选项都没被选择,该平台就不通过 GPIO-lib 支持 GPIO,且代码不可以 被用户使能。 -以下这些方法的实现可以直接使用框架代码,并总是通过 gpio_chip 调度: +以下这些方法的实现可以直接使用框架代码,并总是通过 gpio_chip 调度:: #define gpio_get_value __gpio_get_value #define gpio_set_value __gpio_set_value @@ -508,7 +542,8 @@ arch_initcall()或者更早的地方集成进平台初始化代码，使这些 G 且他们通常可以作为 IRQ 使用。 板级支持 -------- +-------- + 对于外部 GPIO 控制器(例如 I2C 或 SPI 扩展器、专用芯片、多功能器件、FPGA 或 CPLD)，大多数常用板级特定代码都可以注册控制器设备，并保证他们的驱动知道 gpiochip_add()所使用的 GPIO 编号。他们的起始编号通常跟在平台特定的 GPIO @@ -526,8 +561,9 @@ GPIO 可以工作之后才可被注册。解决这类依赖的的一种方法是 设备变成无效时移除它们。 -用户空间的 Sysfs 接口(可选) -======================== +用户空间的 Sysfs 接口（可选） +============================= + 使用“gpiolib”实现框架的平台可以选择配置一个 GPIO 的 sysfs 用户接口。 这不同于 debugfs 接口，因为它提供的是对 GPIO方向和值的控制，而不只显示 一个GPIO 的状态摘要。此外,它可以出现在没有调试支持的产品级系统中。 @@ -548,6 +584,7 @@ GPIO 可以工作之后才可被注册。解决这类依赖的的一种方法是 Sysfs 中的路径 -------------- + 在/sys/class/gpio 中有 3 类入口: - 用于在用户空间控制 GPIO 的控制接口; @@ -625,8 +662,9 @@ GPIO 控制器的路径类似 /sys/class/gpio/gpiochip42/ (对于从#42 GPIO 从内核代码中导出 -------------- -内核代码可以明确地管理那些已通过 gpio_request()申请的 GPIO 的导出: +---------------- + +内核代码可以明确地管理那些已通过 gpio_request()申请的 GPIO 的导出:: /* 导出 GPIO 到用户空间 */ int gpio_export(unsigned gpio, bool direction_may_change); @@ -648,3 +686,9 @@ GPIO 控制器的路径类似 /sys/class/gpio/gpiochip42/ (对于从#42 GPIO 在 GPIO 被导出之后，gpio_export_link()允许在 sysfs 文件系统的任何地方 创建一个到这个 GPIO sysfs 节点的符号链接。这样驱动就可以通过一个描述性的 名字，在 sysfs 中他们所拥有的设备下提供一个(到这个 GPIO sysfs 节点的)接口。 + + +API参考 +======= + +本节中列出的函数已被废弃。在新的代码中应该使用基于GPIO描述符的API。 diff --git a/Documentation/translations/zh_CN/driver-api/index.rst b/Documentation/translations/zh_CN/driver-api/index.rst new file mode 100644 index 000000000000..ba354e1f4e6d --- /dev/null +++ b/Documentation/translations/zh_CN/driver-api/index.rst @@ -0,0 +1,132 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/driver-api/index.rst + +:翻译: + + 司延腾 Yanteng Si <siyanteng@loongson.cn> + +:校译: + +======================== +Linux驱动实现者的API指南 +======================== + +内核提供了各种各样的接口来支持设备驱动的开发。这份文档只是对其中一些接口进行了 +一定程度的整理——希望随着时间的推移，它能变得更好！可用的小节可以在下面看到。 + +.. class:: toc-title + + 目录列表： + +.. toctree:: + :maxdepth: 2 + + gpio/index + io_ordering + +Todolist: + +* driver-model/index +* basics +* infrastructure +* ioctl +* early-userspace/index +* pm/index +* clk +* device-io +* dma-buf +* device_link +* component +* message-based +* infiniband +* aperture +* frame-buffer +* regulator +* reset +* iio/index +* input +* usb/index +* firewire +* pci/index +* cxl/index +* spi +* i2c +* ipmb +* ipmi +* i3c/index +* interconnect +* devfreq +* hsi +* edac +* scsi +* libata +* target +* mailbox +* mtdnand +* miscellaneous +* mei/index +* mtd/index +* mmc/index +* nvdimm/index +* w1 +* rapidio/index +* s390-drivers +* vme +* 80211/index +* uio-howto +* firmware/index +* pin-control +* md/index +* media/index +* misc_devices +* nfc/index +* dmaengine/index +* slimbus +* soundwire/index +* thermal/index +* fpga/index +* acpi/index +* auxiliary_bus +* backlight/lp855x-driver.rst +* connector +* console +* dcdbas +* eisa +* isa +* isapnp +* io-mapping +* generic-counter +* memory-devices/index +* men-chameleon-bus +* ntb +* nvmem +* parport-lowlevel +* pps +* ptp +* phy/index +* pwm +* pldmfw/index +* rfkill +* serial/index +* sm501 +* surface_aggregator/index +* switchtec +* sync_file +* tty/index +* vfio-mediated-device +* vfio +* vfio-pci-device-specific-driver-acceptance +* xilinx/index +* xillybus +* zorro +* hte/index + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/translations/zh_CN/driver-api/io_ordering.rst b/Documentation/translations/zh_CN/driver-api/io_ordering.rst new file mode 100644 index 000000000000..4dbfa4ce92a0 --- /dev/null +++ b/Documentation/translations/zh_CN/driver-api/io_ordering.rst @@ -0,0 +1,60 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/driver-api/io_ordering.rst + +:翻译: + + 林永听 Lin Yongting <linyongting@gmail.com> + 司延腾 Yanteng Si <siyanteng@loongson.cn> + +:校译: + +=========================== +对内存映射地址的I/O写入排序 +=========================== + +在某些平台上，所谓的内存映射I/O是弱顺序。在这些平台上，驱动开发者有责任 +保证I/O内存映射地址的写操作按程序图意的顺序达到设备。通常读取一个“安全” +设备寄存器或桥寄存器，触发IO芯片清刷未处理的写操作到达设备后才处理读操作， +而达到保证目的。驱动程序通常在spinlock保护的临界区退出之前使用这种技术。 +这也可以保证后面的写操作只在前面的写操作之后到达设备（这非常类似于内存 +屏障操作，mb()，不过仅适用于I/O）。 + +假设一个设备驱动程的具体例子:: + + ... + CPU A: spin_lock_irqsave(&dev_lock, flags) + CPU A: val = readl(my_status); + CPU A: ... + CPU A: writel(newval, ring_ptr); + CPU A: spin_unlock_irqrestore(&dev_lock, flags) + ... + CPU B: spin_lock_irqsave(&dev_lock, flags) + CPU B: val = readl(my_status); + CPU B: ... + CPU B: writel(newval2, ring_ptr); + CPU B: spin_unlock_irqrestore(&dev_lock, flags) + ... + +上述例子中，设备可能会先接收到newval2的值，然后接收到newval的值，问题就 +发生了。不过很容易通过下面方法来修复:: + + ... + CPU A: spin_lock_irqsave(&dev_lock, flags) + CPU A: val = readl(my_status); + CPU A: ... + CPU A: writel(newval, ring_ptr); + CPU A: (void)readl(safe_register); /* 配置寄存器？*/ + CPU A: spin_unlock_irqrestore(&dev_lock, flags) + ... + CPU B: spin_lock_irqsave(&dev_lock, flags) + CPU B: val = readl(my_status); + CPU B: ... + CPU B: writel(newval2, ring_ptr); + CPU B: (void)readl(safe_register); /* 配置寄存器？*/ + CPU B: spin_unlock_irqrestore(&dev_lock, flags) + +在解决方案中，读取safe_register寄存器，触发IO芯片清刷未处理的写操作， +再处理后面的读操作，防止引发数据不一致问题。 diff --git a/Documentation/translations/zh_CN/index.rst b/Documentation/translations/zh_CN/index.rst index bf85baca8b3e..2fc60e60feb4 100644 --- a/Documentation/translations/zh_CN/index.rst +++ b/Documentation/translations/zh_CN/index.rst @@ -108,6 +108,7 @@ TODOList: :maxdepth: 2 core-api/index + driver-api/index locking/index accounting/index cpu-freq/index @@ -120,10 +121,10 @@ TODOList: scheduler/index mm/index peci/index + PCI/index TODOList: -* driver-api/index * block/index * cdrom/index * ide/index @@ -148,7 +149,6 @@ TODOList: * crypto/index * bpf/index * usb/index -* PCI/index * scsi/index * misc-devices/index * mhi/index diff --git a/Documentation/translations/zh_CN/io_ordering.txt b/Documentation/translations/zh_CN/io_ordering.txt deleted file mode 100644 index 7bb3086227ae..000000000000 --- a/Documentation/translations/zh_CN/io_ordering.txt +++ /dev/null @@ -1,67 +0,0 @@ -Chinese translated version of Documentation/driver-api/io_ordering.rst - -If you have any comment or update to the content, please contact the -original document maintainer directly. However, if you have a problem -communicating in English you can also ask the Chinese maintainer for -help. Contact the Chinese maintainer if this translation is outdated -or if there is a problem with the translation. - -Chinese maintainer: Lin Yongting <linyongting@gmail.com> ---------------------------------------------------------------------- -Documentation/driver-api/io_ordering.rst 的中文翻译 - -如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文 -交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻 -译存在问题，请联系中文版维护者。 - -中文版维护者： 林永听 Lin Yongting <linyongting@gmail.com> -中文版翻译者： 林永听 Lin Yongting <linyongting@gmail.com> -中文版校译者： 林永听 Lin Yongting <linyongting@gmail.com> - - -以下为正文 ---------------------------------------------------------------------- - -在某些平台上，所谓的内存映射I/O是弱顺序。在这些平台上，驱动开发者有责任 -保证I/O内存映射地址的写操作按程序图意的顺序达到设备。通常读取一个“安全” -设备寄存器或桥寄存器，触发IO芯片清刷未处理的写操作到达设备后才处理读操作， -而达到保证目的。驱动程序通常在spinlock保护的临界区退出之前使用这种技术。 -这也可以保证后面的写操作只在前面的写操作之后到达设备（这非常类似于内存 -屏障操作，mb()，不过仅适用于I/O）。 - -假设一个设备驱动程的具体例子： - - ... -CPU A: spin_lock_irqsave(&dev_lock, flags) -CPU A: val = readl(my_status); -CPU A: ... -CPU A: writel(newval, ring_ptr); -CPU A: spin_unlock_irqrestore(&dev_lock, flags) - ... -CPU B: spin_lock_irqsave(&dev_lock, flags) -CPU B: val = readl(my_status); -CPU B: ... -CPU B: writel(newval2, ring_ptr); -CPU B: spin_unlock_irqrestore(&dev_lock, flags) - ... - -上述例子中，设备可能会先接收到newval2的值，然后接收到newval的值，问题就 -发生了。不过很容易通过下面方法来修复： - - ... -CPU A: spin_lock_irqsave(&dev_lock, flags) -CPU A: val = readl(my_status); -CPU A: ... -CPU A: writel(newval, ring_ptr); -CPU A: (void)readl(safe_register); /* 配置寄存器？*/ -CPU A: spin_unlock_irqrestore(&dev_lock, flags) - ... -CPU B: spin_lock_irqsave(&dev_lock, flags) -CPU B: val = readl(my_status); -CPU B: ... -CPU B: writel(newval2, ring_ptr); -CPU B: (void)readl(safe_register); /* 配置寄存器？*/ -CPU B: spin_unlock_irqrestore(&dev_lock, flags) - -在解决方案中，读取safe_register寄存器，触发IO芯片清刷未处理的写操作， -再处理后面的读操作，防止引发数据不一致问题。 diff --git a/Documentation/translations/zh_CN/oops-tracing.txt b/Documentation/translations/zh_CN/oops-tracing.txt deleted file mode 100644 index c5f3bda7abcb..000000000000 --- a/Documentation/translations/zh_CN/oops-tracing.txt +++ /dev/null @@ -1,212 +0,0 @@ -Chinese translated version of Documentation/admin-guide/bug-hunting.rst - -If you have any comment or update to the content, please contact the -original document maintainer directly. However, if you have a problem -communicating in English you can also ask the Chinese maintainer for -help. Contact the Chinese maintainer if this translation is outdated -or if there is a problem with the translation. - -Chinese maintainer: Dave Young <hidave.darkstar@gmail.com> ---------------------------------------------------------------------- -Documentation/admin-guide/bug-hunting.rst 的中文翻译 - -如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文 -交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻 -译存在问题，请联系中文版维护者。 - -中文版维护者： 杨瑞 Dave Young <hidave.darkstar@gmail.com> -中文版翻译者： 杨瑞 Dave Young <hidave.darkstar@gmail.com> -中文版校译者： 李阳 Li Yang <leoyang.li@nxp.com> - 王聪 Wang Cong <xiyou.wangcong@gmail.com> - -以下为正文 ---------------------------------------------------------------------- - -注意： ksymoops 在2.6中是没有用的。 请以原有格式使用Oops(来自dmesg，等等)。 -忽略任何这样那样关于“解码Oops”或者“通过ksymoops运行”的文档。 如果你贴出运行过 -ksymoops的来自2.6的Oops，人们只会让你重贴一次。 - -快速总结 -------------- - -发现Oops并发送给看似相关的内核领域的维护者。别太担心对不上号。如果你不确定就发给 -和你所做的事情相关的代码的负责人。 如果可重现试着描述怎样重构。 那甚至比oops更有 -价值。 - -如果你对于发送给谁一无所知， 发给linux-kernel@vger.kernel.org。感谢你帮助Linux -尽可能地稳定。 - -Oops在哪里? ----------------------- - -通常Oops文本由klogd从内核缓冲区里读取并传给syslogd，由syslogd写到syslog文件中， -典型地是/var/log/messages(依赖于/etc/syslog.conf)。有时klogd崩溃了,这种情况下你 -能够运行dmesg > file来从内核缓冲区中读取数据并保存下来。 否则你可以 -cat /proc/kmsg > file， 然而你必须介入中止传输， kmsg是一个“永不结束的文件”。如 -果机器崩溃坏到你不能输入命令或者磁盘不可用那么你有三种选择:- - -（1） 手抄屏幕上的文本待机器重启后再输入计算机。 麻烦但如果没有针对崩溃的准备， -这是仅有的选择。 另外，你可以用数码相机把屏幕拍下来-不太好，但比没有强。 如果信 -息滚动到了终端的上面，你会发现以高分辩率启动（比如，vga=791）会让你读到更多的文 -本。（注意：这需要vesafb，所以对‘早期’的oops没有帮助） - -（2）用串口终端启动（请参看Documentation/admin-guide/serial-console.rst），运行一个null -modem到另一台机器并用你喜欢的通讯工具获取输出。Minicom工作地很好。 - -（3）使用Kdump（请参看Documentation/admin-guide/kdump/kdump.rst）， -使用在Documentation/admin-guide/kdump/gdbmacros.txt中定义的dmesg gdb宏，从旧的内存中提取内核 -环形缓冲区。 - -完整信息 ----------------- - -注意：以下来自于Linus的邮件适用于2.4内核。 我因为历史原因保留了它，并且因为其中 -一些信息仍然适用。 特别注意的是，请忽略任何ksymoops的引用。 - -From: Linus Torvalds <torvalds@osdl.org> - -怎样跟踪Oops.. [原发到linux-kernel的一封邮件] - -主要的窍门是有五年和这些烦人的oops消息打交道的经验;-) - -实际上，你有办法使它更简单。我有两个不同的方法： - - gdb /usr/src/linux/vmlinux - gdb> disassemble <offending_function> - -那是发现问题的简单办法，至少如果bug报告做的好的情况下（象这个一样-运行ksymoops -得到oops发生的函数及函数内的偏移）。 - -哦，如果报告发生的内核以相同的编译器和相似的配置编译它会有帮助的。 - -另一件要做的事是反汇编bug报告的“Code”部分：ksymoops也会用正确的工具来做这件事， -但如果没有那些工具你可以写一个傻程序： - - char str[] = "\xXX\xXX\xXX..."; - main(){} - -并用gcc -g编译它然后执行“disassemble str”（XX部分是由Oops报告的值-你可以仅剪切 -粘贴并用“\x”替换空格-我就是这么做的，因为我懒得写程序自动做这一切）。 - -另外，你可以用scripts/decodecode这个shell脚本。它的使用方法是： -decodecode < oops.txt - -“Code”之后的十六进制字节可能（在某些架构上）有一些当前指令之前的指令字节以及 -当前和之后的指令字节 - -Code: f9 0f 8d f9 00 00 00 8d 42 0c e8 dd 26 11 c7 a1 60 ea 2b f9 8b 50 08 a1 -64 ea 2b f9 8d 34 82 8b 1e 85 db 74 6d 8b 15 60 ea 2b f9 <8b> 43 04 39 42 54 -7e 04 40 89 42 54 8b 43 04 3b 05 00 f6 52 c0 - -最后，如果你想知道代码来自哪里，你可以： - - cd /usr/src/linux - make fs/buffer.s # 或任何产生BUG的文件 - -然后你会比gdb反汇编更清楚的知道发生了什么。 - -现在，问题是把你所拥有的所有数据结合起来：C源码（关于它应该怎样的一般知识）， -汇编代码及其反汇编得到的代码（另外还有从“oops”消息得到的寄存器状态-对了解毁坏的 -指针有用，而且当你有了汇编代码你也能拿其它的寄存器和任何它们对应的C表达式做匹配 -）。 - -实际上，你仅需看看哪里不匹配（这个例子是“Code”反汇编和编译器生成的代码不匹配）。 -然后你须要找出为什么不匹配。通常很简单-你看到代码使用了空指针然后你看代码想知道 -空指针是怎么出现的，还有检查它是否合法.. - -现在，如果明白这是一项耗时的工作而且需要一丁点儿的专心，没错。这就是我为什么大多 -只是忽略那些没有符号表信息的崩溃报告的原因：简单的说太难查找了（我有一些 -程序用于在内核代码段中搜索特定的模式，而且有时我也已经能找出那些崩溃的地方，但是 -仅仅是找出正确的序列也确实需要相当扎实的内核知识） - -_有时_会发生这种情况，我仅看到崩溃中的反汇编代码序列， 然后我马上就明白问题出在 -哪里。这时我才意识到自己干这个工作已经太长时间了;-) - - Linus - - ---------------------------------------------------------------------------- -关于Oops跟踪的注解： - -为了帮助Linus和其它内核开发者，klogd纳入了大量的支持来处理保护错误。为了拥有对 -地址解析的完整支持至少应该使用1.3-pl3的sysklogd包。 - -当保护错误发生时，klogd守护进程自动把内核日志信息中的重要地址翻译成它们相应的符 -号。 - -klogd执行两种类型的地址解析。首先是静态翻译其次是动态翻译。静态翻译和ksymoops -一样使用System.map文件。为了做静态翻译klogd守护进程必须在初始化时能找到system -map文件。关于klogd怎样搜索map文件请参看klogd手册页。 - -动态地址翻译在使用内核可装载模块时很重要。 因为内核模块的内存是从内核动态内存池 -里分配的，所以不管是模块开始位置还是模块中函数和符号的位置都不是固定的。 - -内核支持允许程序决定装载哪些模块和它们在内存中位置的系统调用。使用这些系统调用 -klogd守护进程生成一张符号表用于调试发生在可装载模块中的保护错误。 - -至少klogd会提供产生保护错误的模块名。还可有额外的符号信息供可装载模块开发者选择 -以从模块中输出符号信息。 - -因为内核模块环境可能是动态的，所以必须有一种机制当模块环境发生改变时来通知klogd -守护进程。 有一些可用的命令行选项允许klogd向当前执行中的守护进程发送信号，告知符 -号信息应该被刷新了。 更多信息请参看klogd手册页。 - -sysklogd发布时包含一个补丁修改了modules-2.0.0包，无论何时一个模块装载或者卸载都 -会自动向klogd发送信号。打上这个补丁提供了必要的对调试发生于内核可装载模块的保护 -错误的无缝支持。 - -以下是被klogd处理过的发生在可装载模块中的一个保护错误例子： ---------------------------------------------------------------------------- -Aug 29 09:51:01 blizard kernel: Unable to handle kernel paging request at virtual address f15e97cc -Aug 29 09:51:01 blizard kernel: current->tss.cr3 = 0062d000, %cr3 = 0062d000 -Aug 29 09:51:01 blizard kernel: *pde = 00000000 -Aug 29 09:51:01 blizard kernel: Oops: 0002 -Aug 29 09:51:01 blizard kernel: CPU: 0 -Aug 29 09:51:01 blizard kernel: EIP: 0010:[oops:_oops+16/3868] -Aug 29 09:51:01 blizard kernel: EFLAGS: 00010212 -Aug 29 09:51:01 blizard kernel: eax: 315e97cc ebx: 003a6f80 ecx: 001be77b edx: 00237c0c -Aug 29 09:51:01 blizard kernel: esi: 00000000 edi: bffffdb3 ebp: 00589f90 esp: 00589f8c -Aug 29 09:51:01 blizard kernel: ds: 0018 es: 0018 fs: 002b gs: 002b ss: 0018 -Aug 29 09:51:01 blizard kernel: Process oops_test (pid: 3374, process nr: 21, stackpage=00589000) -Aug 29 09:51:01 blizard kernel: Stack: 315e97cc 00589f98 0100b0b4 bffffed4 0012e38e 00240c64 003a6f80 00000001 -Aug 29 09:51:01 blizard kernel: 00000000 00237810 bfffff00 0010a7fa 00000003 00000001 00000000 bfffff00 -Aug 29 09:51:01 blizard kernel: bffffdb3 bffffed4 ffffffda 0000002b 0007002b 0000002b 0000002b 00000036 -Aug 29 09:51:01 blizard kernel: Call Trace: [oops:_oops_ioctl+48/80] [_sys_ioctl+254/272] [_system_call+82/128] -Aug 29 09:51:01 blizard kernel: Code: c7 00 05 00 00 00 eb 08 90 90 90 90 90 90 90 90 89 ec 5d c3 ---------------------------------------------------------------------------- - -Dr. G.W. Wettstein Oncology Research Div. Computing Facility -Roger Maris Cancer Center INTERNET: greg@wind.rmcc.com -820 4th St. N. -Fargo, ND 58122 -Phone: 701-234-7556 - - ---------------------------------------------------------------------------- -受污染的内核 - -一些oops报告在程序记数器之后包含字符串'Tainted: '。这表明内核已经被一些东西给污 -染了。 该字符串之后紧跟着一系列的位置敏感的字符，每个代表一个特定的污染值。 - - 1：'G'如果所有装载的模块都有GPL或相容的许可证，'P'如果装载了任何的专有模块。 -没有模块MODULE_LICENSE或者带有insmod认为是与GPL不相容的的MODULE_LICENSE的模块被 -认定是专有的。 - - 2：'F'如果有任何通过“insmod -f”被强制装载的模块，' '如果所有模块都被正常装载。 - - 3：'S'如果oops发生在SMP内核中，运行于没有证明安全运行多处理器的硬件。 当前这种 -情况仅限于几种不支持SMP的速龙处理器。 - - 4：'R'如果模块通过“insmod -f”被强制装载，' '如果所有模块都被正常装载。 - - 5：'M'如果任何处理器报告了机器检查异常，' '如果没有发生机器检查异常。 - - 6：'B'如果页释放函数发现了一个错误的页引用或者一些非预期的页标志。 - - 7：'U'如果用户或者用户应用程序特别请求设置污染标志，否则' '。 - - 8：'D'如果内核刚刚死掉，比如有OOPS或者BUG。 - -使用'Tainted: '字符串的主要原因是要告诉内核调试者，这是否是一个干净的内核亦或发 -生了任何的不正常的事。污染是永久的：即使出错的模块已经被卸载了，污染值仍然存在， -以表明内核不再值得信任。 diff --git a/Documentation/translations/zh_CN/process/coding-style.rst b/Documentation/translations/zh_CN/process/coding-style.rst index 638d714bec83..fa28ef0a7fee 100644 --- a/Documentation/translations/zh_CN/process/coding-style.rst +++ b/Documentation/translations/zh_CN/process/coding-style.rst @@ -1,21 +1,23 @@ .. include:: ../disclaimer-zh_CN.rst -:Original: :ref:`Documentation/process/coding-style.rst <codingstyle>` +:Original: Documentation/process/coding-style.rst .. _cn_codingstyle: -译者:: +:译者: + - 张乐 Zhang Le <r0bertz@gentoo.org> + - Andy Deng <theandy.deng@gmail.com> + - 吴想成 <bobwxc@email.cn> - 中文版维护者： 张乐 Zhang Le <r0bertz@gentoo.org> - 中文版翻译者： 张乐 Zhang Le <r0bertz@gentoo.org> - 中文版校译者： 王聪 Wang Cong <xiyou.wangcong@gmail.com> - wheelz <kernel.zeng@gmail.com> - 管旭东 Xudong Guan <xudong.guan@gmail.com> - Li Zefan <lizf@cn.fujitsu.com> - Wang Chen <wangchen@cn.fujitsu.com> +:校译: + - 王聪 Wang Cong <xiyou.wangcong@gmail.com> + - wheelz <kernel.zeng@gmail.com> + - 管旭东 Xudong Guan <xudong.guan@gmail.com> + - Li Zefan <lizf@cn.fujitsu.com> + - Wang Chen <wangchen@cn.fujitsu.com> Linux 内核代码风格 -========================= +================== 这是一个简短的文档，描述了 linux 内核的首选代码风格。代码风格是因人而异的， 而且我不愿意把自己的观点强加给任何人，但这就像我去做任何事情都必须遵循的原则 @@ -29,7 +31,7 @@ Linux 内核代码风格 1) 缩进 --------------- +------- 制表符是 8 个字符，所以缩进也是 8 个字符。有些异端运动试图将缩进变为 4 (甚至 2！) 字符深，这几乎相当于尝试将圆周率的值定义为 3。 @@ -73,6 +75,22 @@ Linux 内核代码风格 if (condition) do_this; do_something_everytime; +不要使用逗号来避免使用大括号： + +.. code-block:: c + + if (condition) + do_this(), do_that(); + +使用大括号包裹多语句： + +.. code-block:: c + + if (condition) { + do_this(); + do_that(); + } + 也不要在一行里放多个赋值语句。内核代码风格超级简单。就是避免可能导致别人误读 的表达式。 @@ -83,20 +101,25 @@ Linux 内核代码风格 2) 把长的行和字符串打散 ------------------------------- +----------------------- 代码风格的意义就在于使用平常使用的工具来维持代码的可读性和可维护性。 每一行的长度的限制是 80 列，我们强烈建议您遵守这个惯例。 长于 80 列的语句要打散成有意义的片段。除非超过 80 列能显著增加可读性，并且不 -会隐藏信息。子片段要明显短于母片段，并明显靠右。这同样适用于有着很长参数列表 -的函数头。然而，绝对不要打散对用户可见的字符串，例如 printk 信息，因为这样就 +会隐藏信息。 + +子片段要明显短于母片段，并明显靠右。一种非常常用的样式是将子体与函数左括号对齐。 + +这同样适用于有着很长参数列表的函数头。 + +然而，绝对不要打散对用户可见的字符串，例如 printk 信息，因为这样就 很难对它们 grep。 3) 大括号和空格的放置 ------------------------------- +--------------------- C 语言风格中另外一个常见问题是大括号的放置。和缩进大小不同，选择或弃用某种放 置策略并没有多少技术上的原因，不过首选的方式，就像 Kernighan 和 Ritchie 展示 @@ -132,12 +155,12 @@ C 语言风格中另外一个常见问题是大括号的放置。和缩进大小 body of function } -全世界的异端可能会抱怨这个不一致性是... 呃... 不一致的，不过所有思维健全的人 +全世界的异端可能会抱怨这个不一致性是……呃……不一致，不过所有思维健全的人 都知道 (a) K&R 是 **正确的** 并且 (b) K&R 是正确的。此外，不管怎样函数都是特 殊的 (C 函数是不能嵌套的)。 注意结束大括号独自占据一行，除非它后面跟着同一个语句的剩余部分，也就是 do 语 -句中的 "while" 或者 if 语句中的 "else"，像这样： +句中的 ``while`` 或者 if 语句中的 ``else`` ，像这样： .. code-block:: c @@ -191,7 +214,7 @@ C 语言风格中另外一个常见问题是大括号的放置。和缩进大小 } 3.1) 空格 -******************** +********* Linux 内核的空格使用方式 (主要) 取决于它是用于函数还是关键字。(大多数) 关键字 后要加一个空格。值得注意的例外是 sizeof, typeof, alignof 和 __attribute__，这 @@ -254,7 +277,7 @@ Linux 内核的空格使用方式 (主要) 取决于它是用于函数还是关 4) 命名 ------------------------------- +------- C 是一个简朴的语言，你的命名也应该这样。和 Modula-2 和 Pascal 程序员不同， C 程序员不使用类似 ThisVariableIsATemporaryCounter 这样华丽的名字。C 程序员会 @@ -275,11 +298,31 @@ C 程序员不使用类似 ThisVariableIsATemporaryCounter 这样华丽的名字 可能的话。类似的， ``tmp`` 可以用来称呼任意类型的临时变量。 如果你怕混淆了你的本地变量名，你就遇到另一个问题了，叫做函数增长荷尔蒙失衡综 -合症。请看第六章 (函数)。 +合征。请看第六章 (函数)。 +对于符号名称和文档，避免引入新的“master/slave”（或独立于“master”的“slave”） +和“blacklist/whitelist”。 + +“master/slave”推荐替换为： + '{primary,main} / {secondary,replica,subordinate}' + '{initiator,requester} / {target,responder}' + '{controller,host} / {device,worker,proxy}' + 'leader/follower' + 'director/performer' + +“blacklist/whitelist”推荐替换为： + 'denylist/allowlist' + 'blocklist/passlist' + +引入新用法的例外情况是：维护用户空间ABI/API，或更新现有（截至2020年）硬件或 +协议规范的代码时要求这些术语。对于新规范，尽可能将术语的规范用法转换为内核 +编码标准。 + +.. warning:: + 以上主从、黑白名单规则不适用于中文文档，请勿更改中文术语！ 5) Typedef ------------ +---------- 不要使用类似 ``vps_t`` 之类的东西。 @@ -308,7 +351,7 @@ C 程序员不使用类似 ThisVariableIsATemporaryCounter 这样华丽的名字 .. note:: - 不透明性和 "访问函数" 本身是不好的。我们使用 pte_t 等类型的原因在于真 + 不透明性和“访问函数”本身是不好的。我们使用 pte_t 等类型的原因在于真 的是完全没有任何共用的可访问信息。 (b) 清楚的整数类型，如此，这层抽象就可以 **帮助** 消除到底是 ``int`` 还是 @@ -353,7 +396,7 @@ C 程序员不使用类似 ThisVariableIsATemporaryCounter 这样华丽的名字 6) 函数 ------------------------------- +------- 函数应该简短而漂亮，并且只完成一件事情。函数应该可以一屏或者两屏显示完 (我们 都知道 ISO/ANSI 屏幕大小是 80x24)，只做一件事情，而且把它做好。 @@ -383,12 +426,46 @@ C 程序员不使用类似 ThisVariableIsATemporaryCounter 这样华丽的名字 } EXPORT_SYMBOL(system_is_up); -在函数原型中，包含函数名和它们的数据类型。虽然 C 语言里没有这样的要求，在 +6.1) 函数原型 +************* + +在函数原型中包含参数名和它们的数据类型。虽然 C 语言里没有这样的要求，但在 Linux 里这是提倡的做法，因为这样可以很简单的给读者提供更多的有价值的信息。 +不要在函数声明里使用 ``extern`` 关键字，因为这会导致代码行变长，并且不是严格 +必需的。 + +写函数原型时，请保持 `元素顺序规则 <https://lore.kernel.org/mm-commits/CAHk-=wiOCLRny5aifWNhr621kYrJwhfURsa0vFPeUEm8mF0ufg@mail.gmail.com/>`_ 。 +例如下列函数声明:: + + __init void * __must_check action(enum magic value, size_t size, u8 count, + char *fmt, ...) __printf(4, 5) __malloc; + +推荐的函数原型元素顺序是： + +- 储存类型（下方的 ``static __always_inline`` ，注意 ``__always_inline`` + 技术上来讲是个属性但被当做 ``inline`` ） +- 储存类型属性（上方的 ``__init`` ——即节声明，但也像 ``__cold`` ） +- 返回类型（上方的 ``void *`` ） +- 返回类型属性（上方的 ``__must_check`` ） +- 函数名（上方的 ``action`` ） +- 函数参数（上方的 ``(enum magic value, size_t size, u8 count, char *fmt, ...)`` ， + 注意必须写上参数名） +- 函数参数属性（上方的 ``__printf(4, 5)`` ） +- 函数行为属性（上方的 ``__malloc`` ） + +请注意，对于函数 **定义** （即实际函数体），编译器不允许在函数参数之后添加函 +数参数属性。在这种情况下，它们应该跟随存储类型属性（例如，与上面的 **声明** +示例相比，请注意下面的 ``__printf(4, 5)`` 的位置发生了变化）:: + + static __always_inline __init __printf(4, 5) void * __must_check action(enum magic value, + size_t size, u8 count, char *fmt, ...) __malloc + { + ... + } 7) 集中的函数退出途径 ------------------------------- +--------------------- 虽然被某些人声称已经过时，但是 goto 语句的等价物还是经常被编译器所使用，具体 形式是无条件跳转指令。 @@ -432,7 +509,7 @@ Linux 里这是提倡的做法，因为这样可以很简单的给读者提供 return result; } -一个需要注意的常见错误是 ``一个 err 错误`` ，就像这样： +一个需要注意的常见错误是 ``单 err 错误`` ，就像这样： .. code-block:: c @@ -456,19 +533,19 @@ Linux 里这是提倡的做法，因为这样可以很简单的给读者提供 8) 注释 ------------------------------- +------- 注释是好的，不过有过度注释的危险。永远不要在注释里解释你的代码是如何运作的： 更好的做法是让别人一看你的代码就可以明白，解释写的很差的代码是浪费时间。 -一般的，你想要你的注释告诉别人你的代码做了什么，而不是怎么做的。也请你不要把 +一般来说你用注释告诉别人你的代码做了什么，而不是怎么做的。也请你不要把 注释放在一个函数体内部：如果函数复杂到你需要独立的注释其中的一部分，你很可能 需要回到第六章看一看。你可以做一些小注释来注明或警告某些很聪明 (或者槽糕) 的 做法，但不要加太多。你应该做的，是把注释放在函数的头部，告诉人们它做了什么， 也可以加上它做这些事情的原因。 -当注释内核 API 函数时，请使用 kernel-doc 格式。请看 -Documentation/doc-guide/ 和 scripts/kernel-doc 以获得详细信息。 +当注释内核 API 函数时，请使用 kernel-doc 格式。详见 +Documentation/translations/zh_CN/doc-guide/index.rst 和 scripts/kernel-doc 。 长 (多行) 注释的首选风格是： @@ -500,17 +577,18 @@ Documentation/doc-guide/ 和 scripts/kernel-doc 以获得详细信息。 9) 你已经把事情弄糟了 ------------------------------- +--------------------- -这没什么，我们都是这样。可能你的使用了很长时间 Unix 的朋友已经告诉你 +这没什么，我们都是这样。可能你长期使用 Unix 的朋友已经告诉你 ``GNU emacs`` 能自动帮你格式化 C 源代码，而且你也注意到了，确实是这样，不过它 所使用的默认值和我们想要的相去甚远 (实际上，甚至比随机打的还要差——无数个猴子 -在 GNU emacs 里打字永远不会创造出一个好程序) (译注：Infinite Monkey Theorem) +在 GNU emacs 里打字永远不会创造出一个好程序) +*(译注：Infinite Monkey Theorem)* 所以你要么放弃 GNU emacs，要么改变它让它使用更合理的设定。要采用后一个方案， 你可以把下面这段粘贴到你的 .emacs 文件里。 -.. code-block:: none +.. code-block:: elisp (defun c-lineup-arglist-tabs-only (ignored) "Line up argument lists by tabs, not spaces" @@ -529,7 +607,7 @@ Documentation/doc-guide/ 和 scripts/kernel-doc 以获得详细信息。 (c-offsets-alist . ( (arglist-close . c-lineup-arglist-tabs-only) (arglist-cont-nonempty . - (c-lineup-gcc-asm-reg c-lineup-arglist-tabs-only)) + (c-lineup-gcc-asm-reg c-lineup-arglist-tabs-only)) (arglist-intro . +) (brace-list-intro . +) (c . c-lineup-C-comments) @@ -573,9 +651,14 @@ Documentation/doc-guide/ 和 scripts/kernel-doc 以获得详细信息。 ``indent`` 有很多选项，特别是重新格式化注释的时候，你可能需要看一下它的手册。 不过记住： ``indent`` 不能修正坏的编程习惯。 +请注意，您还可以使用 ``clang-format`` 工具帮助您处理这些规则，快速自动重新格 +式化部分代码，并审阅整个文件以发现代码风格错误、打字错误和可能的改进。它还可 +以方便地排序 ``#include`` ，对齐变量/宏，重排文本和其他类似任务。 +详见 Documentation/process/clang-format.rst 。 + 10) Kconfig 配置文件 ------------------------------- +-------------------- 对于遍布源码树的所有 Kconfig* 配置文件来说，它们缩进方式有所不同。紧挨着 ``config`` 定义的行，用一个制表符缩进，然而 help 信息的缩进则额外增加 2 个空 @@ -598,11 +681,11 @@ Documentation/doc-guide/ 和 scripts/kernel-doc 以获得详细信息。 depends on ADFS_FS ... -要查看配置文件的完整文档，请看 Documentation/kbuild/kconfig-language.rst。 +要查看配置文件的完整文档，请看 Documentation/kbuild/kconfig-language.rst 。 11) 数据结构 ------------------------------- +------------ 如果一个数据结构，在创建和销毁它的单线执行环境之外可见，那么它必须要有一个引 用计数器。内核里没有垃圾收集 (并且内核之外的垃圾收集慢且效率低下)，这意味着你 @@ -626,7 +709,7 @@ mm_count)，和文件系统 (``struct super_block``: s_count 和 s_active) 中 12) 宏，枚举和RTL ------------------------------- +----------------- 用于定义常量的宏的名字及枚举里的标签需要大写。 @@ -638,7 +721,7 @@ mm_count)，和文件系统 (``struct super_block``: s_count 和 s_active) 中 宏的名字请用大写字母，不过形如函数的宏的名字可以用小写字母。 -一般的，如果能写成内联函数就不要写成像函数的宏。 +通常如果能写成内联函数就不要写成像函数的宏。 含有多个语句的宏应该被包含在一个 do-while 代码块里： @@ -696,18 +779,18 @@ mm_count)，和文件系统 (``struct super_block``: s_count 和 s_active) 中 (ret); \ }) -ret 是本地变量的通用名字 - __foo_ret 更不容易与一个已存在的变量冲突。 +ret 是本地变量的通用名字—— __foo_ret 更不容易与一个已存在的变量冲突。 cpp 手册对宏的讲解很详细。gcc internals 手册也详细讲解了 RTL，内核里的汇编语 言经常用到它。 13) 打印内核消息 ------------------------------- +---------------- -内核开发者应该是受过良好教育的。请一定注意内核信息的拼写，以给人以好的印象。 +内核开发者应该看起来有文化。请一定注意内核信息的拼写，以给人良好的印象。 不要用不规范的单词比如 ``dont``，而要用 ``do not`` 或者 ``don't`` 。保证这些信 -息简单明了,无歧义。 +息简单明了、无歧义。 内核信息不必以英文句号结束。 @@ -724,17 +807,18 @@ dev_info() 等等。对于那些不和某个特定设备相关连的信息，<li 或设定了 CONFIG_DYNAMIC_DEBUG。实际这同样是为了 dev_dbg()，一个相关约定是在一 个已经开启了 DEBUG 时，使用 VERBOSE_DEBUG 来添加 dev_vdbg()。 -许多子系统拥有 Kconfig 调试选项来开启 -DDEBUG 在对应的 Makefile 里面；在其他 +许多子系统拥有 Kconfig 调试选项来开启对应 Makefile 里面的 -DDEBUG；在其他 情况下，特殊文件使用 #define DEBUG。当一条调试信息需要被无条件打印时，例如， 如果已经包含一个调试相关的 #ifdef 条件，printk(KERN_DEBUG ...) 就可被使用。 14) 分配内存 ------------------------------- +------------ 内核提供了下面的一般用途的内存分配函数： kmalloc(), kzalloc(), kmalloc_array(), kcalloc(), vmalloc() 和 vzalloc()。 -请参考 API 文档以获取有关它们的详细信息。 +请参考 API 文档以获取有关它们的详细信息： +Documentation/translations/zh_CN/core-api/memory-allocation.rst 。 传递结构体大小的首选形式是这样的： @@ -761,11 +845,13 @@ kmalloc(), kzalloc(), kmalloc_array(), kcalloc(), vmalloc() 和 vzalloc()。 p = kcalloc(n, sizeof(...), ...); -两种形式检查分配大小 n * sizeof(...) 的溢出，如果溢出返回 NULL。 +两种形式都会检查分配 n * sizeof(...) 大小时内存的溢出，如果溢出返回 NULL。 +在没有 __GFP_NOWARN 的情况下使用时，这些通用分配函数都会在失败时发起堆栈转储， +因此当返回NULL时，没有必要发出额外的失败消息。 15) 内联弊病 ------------------------------- +------------ 有一个常见的误解是 ``内联`` 是 gcc 提供的可以让代码运行更快的一个选项。虽然使 用内联函数有时候是恰当的 (比如作为一种替代宏的方式，请看第十二章)，不过很多情 @@ -786,7 +872,7 @@ inline gcc 也可以自动使其内联。而且其他用户可能会要求移除 16) 函数返回值及命名 ------------------------------- +-------------------- 函数可以返回多种不同类型的值，最常见的一种是表明函数执行成功或者失败的值。这样 的一个值可以表示为一个错误代码整数 (-Exxx＝失败，0＝成功) 或者一个 ``成功`` @@ -797,7 +883,7 @@ inline gcc 也可以自动使其内联。而且其他用户可能会要求移除 产生这种 bug，请遵循下面的惯例:: 如果函数的名字是一个动作或者强制性的命令，那么这个函数应该返回错误代 - 码整数。如果是一个判断，那么函数应该返回一个 "成功" 布尔值。 + 码整数。如果是一个判断，那么函数应该返回一个“成功”布尔值。 比如， ``add work`` 是一个命令，所以 add_work() 在成功时返回 0，在失败时返回 -EBUSY。类似的，因为 ``PCI device present`` 是一个判断，所以 pci_dev_present() @@ -806,13 +892,35 @@ inline gcc 也可以自动使其内联。而且其他用户可能会要求移除 所有 EXPORTed 函数都必须遵守这个惯例，所有的公共函数也都应该如此。私有 (static) 函数不需要如此，但是我们也推荐这样做。 -返回值是实际计算结果而不是计算是否成功的标志的函数不受此惯例的限制。一般的， +返回值是实际计算结果而不是计算是否成功的标志的函数不受此惯例的限制。通常 他们通过返回一些正常值范围之外的结果来表示出错。典型的例子是返回指针的函数， 他们使用 NULL 或者 ERR_PTR 机制来报告错误。 +17) 使用布尔类型 +---------------- + +Linux内核布尔（bool）类型是C99 _Bool类型的别名。布尔值只能为0或1，而对布尔的 +隐式或显式转换将自动将值转换为true或false。在使用布尔类型时 **不需要** 构造， +它会消除一类错误。 + +使用布尔值时，应使用true和false定义，而不是1和0。 -17) 不要重新发明内核宏 ------------------------------- +布尔函数返回类型和堆栈变量总是可以在适当的时候使用。鼓励使用布尔来提高可读性， +并且布尔值在存储时通常比“int”更好。 + +如果缓存行布局或值的大小很重要，请不要使用布尔，因为其大小和对齐方式根据编译 +的体系结构而不同。针对对齐和大小进行优化的结构体不应使用布尔。 + +如果一个结构体有多个true/false值，请考虑将它们合并为具有1比特成员的位域，或使 +用适当的固定宽度类型，如u8。 + +类似地，对于函数参数，多个true/false值可以合并为单个按位的“标志”参数，如果调 +用点具有裸true/false常量，“标志”参数通常是更具可读性的替代方法。 + +总之，在结构体和参数中有限地使用布尔可以提高可读性。 + +18) 不要重新发明内核宏 +---------------------- 头文件 include/linux/kernel.h 包含了一些宏，你应该使用它们，而不要自己写一些 它们的变种。比如，如果你需要计算一个数组的长度，使用这个宏 @@ -832,11 +940,11 @@ inline gcc 也可以自动使其内联。而且其他用户可能会要求移除 在你的代码里自己重新定义。 -18) 编辑器模式行和其他需要罗嗦的事情 --------------------------------------------------- +19) 编辑器模式行和其他需要罗嗦的事情 +------------------------------------ 有一些编辑器可以解释嵌入在源文件里的由一些特殊标记标明的配置信息。比如，emacs -能够解释被标记成这样的行： +能够解析被标记成这样的行： .. code-block:: c @@ -852,7 +960,7 @@ inline gcc 也可以自动使其内联。而且其他用户可能会要求移除 End: */ -Vim 能够解释这样的标记： +Vim 能够解析这样的标记： .. code-block:: c @@ -863,8 +971,8 @@ Vim 能够解释这样的标记： 的模式，或者使用其他可以产生正确的缩进的巧妙方法。 -19) 内联汇编 ------------------------------- +20) 内联汇编 +------------ 在特定架构的代码中，你可能需要内联汇编与 CPU 和平台相关功能连接。需要这么做时 就不要犹豫。然而，当 C 可以完成工作时，不要平白无故地使用内联汇编。在可能的情 @@ -880,8 +988,8 @@ Vim 能够解释这样的标记： 移除了。你不必总是这样做，尽管，这不必要的举动会限制优化。 在写一个包含多条指令的单个内联汇编语句时，把每条指令用引号分割而且各占一行， -除了最后一条指令外，在每个指令结尾加上 \n\t，让汇编输出时可以正确地缩进下一条 -指令： +除了最后一条指令外，在每个指令结尾加上 ``\n\t`` ，让汇编输出时可以正确地缩进 +下一条指令： .. code-block:: c @@ -890,10 +998,10 @@ Vim 能够解释这样的标记： : /* outputs */ : /* inputs */ : /* clobbers */); -20) 条件编译 ------------------------------- +21) 条件编译 +------------ -只要可能，就不要在 .c 文件里面使用预处理条件 (#if, #ifdef)；这样做让代码更难 +只要可能，就不要在 .c 文件里面使用预处理条件 (#if, #ifdef)；这样做会让代码更难 阅读并且更难去跟踪逻辑。替代方案是，在头文件中用预处理条件提供给那些 .c 文件 使用，再给 #else 提供一个空桩 (no-op stub) 版本，然后在 .c 文件内无条件地调用 那些 (定义在头文件内的) 函数。这样做，编译器会避免为桩函数 (stub) 的调用生成 @@ -904,8 +1012,8 @@ Vim 能够解释这样的标记： 条件到这个辅助函数内。 如果你有一个在特定配置中，可能变成未使用的函数或变量，编译器会警告它定义了但 -未使用，把它标记为 __maybe_unused 而不是将它包含在一个预处理条件中。(然而，如 -果一个函数或变量总是未使用，就直接删除它。) +未使用，请把它标记为 __maybe_unused 而不是将它包含在一个预处理条件中。(然而， +如果一个函数或变量总是未使用，就直接删除它。) 在代码中，尽可能地使用 IS_ENABLED 宏来转化某个 Kconfig 标记为 C 的布尔 表达式，并在一般的 C 条件中使用它： @@ -931,23 +1039,45 @@ Vim 能够解释这样的标记： #endif /* CONFIG_SOMETHING */ -附录 I) 参考 -------------------- +附录 I) 参考资料 +---------------- -The C Programming Language, 第二版 +The C Programming Language, 2nd Edition 作者：Brian W. Kernighan 和 Denni M. Ritchie. Prentice Hall, Inc., 1988. -ISBN 0-13-110362-8 (软皮), 0-13-110370-9 (硬皮). +ISBN 0-13-110362-8 (平装), 0-13-110370-9 (精装). + +.. note:: + + 《C程序设计语言（第2版）》 + 作者：[美] Brian W. Kernighan / [美] Dennis M. Ritchie + 译者：徐宝文 / 李志 / 尤晋元（审校） + 出版社：机械工业出版社，2019 + ISBN：9787111617945 The Practice of Programming 作者：Brian W. Kernighan 和 Rob Pike. Addison-Wesley, Inc., 1999. ISBN 0-201-61586-X. +.. note:: + + 《程序设计实践》 + 作者：[美] Brian W. Kernighan / [美] Rob Pike + 出版社：机械工业出版社，2005 + ISBN：9787111091578 + + 《程序设计实践》 + 作者：[美] Brian W. Kernighan / Rob Pike + 译者：裘宗燕 + 出版社：机械工业出版社，2000 + ISBN：9787111075738 + GNU 手册 - 遵循 K&R 标准和此文本 - cpp, gcc, gcc internals and indent, 都可以从 https://www.gnu.org/manual/ 找到 WG14 是 C 语言的国际标准化工作组，URL: http://www.open-std.org/JTC1/SC22/WG14/ -Kernel process/coding-style.rst，作者 greg@kroah.com 发表于 OLS 2002： +内核文档 Documentation/process/coding-style.rst， +作者 greg@kroah.com 发表于 OLS 2002： http://www.kroah.com/linux/talks/ols_2002_kernel_codingstyle_talk/html/ diff --git a/Documentation/translations/zh_CN/process/email-clients.rst b/Documentation/translations/zh_CN/process/email-clients.rst index 102023651118..34d51cdadc7b 100644 --- a/Documentation/translations/zh_CN/process/email-clients.rst +++ b/Documentation/translations/zh_CN/process/email-clients.rst @@ -1,17 +1,20 @@ -.. _cn_email_clients: +.. SPDX-License-Identifier: GPL-2.0-or-later .. include:: ../disclaimer-zh_CN.rst -:Original: :ref:`Documentation/process/email-clients.rst <email_clients>` +.. _cn_email_clients: -译者:: +:Original: Documentation/process/email-clients.rst - 中文版维护者： 贾威威 Harry Wei <harryxiyou@gmail.com> - 中文版翻译者： 贾威威 Harry Wei <harryxiyou@gmail.com> - 时奎亮 Alex Shi <alex.shi@linux.alibaba.com> - 中文版校译者： Yinglin Luan <synmyth@gmail.com> - Xiaochen Wang <wangxiaochen0@gmail.com> - yaxinsn <yaxinsn@163.com> +:译者: + - 贾威威 Harry Wei <harryxiyou@gmail.com> + - 时奎亮 Alex Shi <alexs@kernel.org> + - 吴想成 Wu XiangCheng <bobwxc@email.cn> + +:校译: + - Yinglin Luan <synmyth@gmail.com> + - Xiaochen Wang <wangxiaochen0@gmail.com> + - yaxinsn <yaxinsn@163.com> Linux邮件客户端配置信息 ======================= @@ -27,12 +30,17 @@ Git 改日志。如果工作正常，再将补丁发送到相应的邮件列表。 -普通配置 +通用配置 -------- + Linux内核补丁是通过邮件被提交的，最好把补丁作为邮件体的内嵌文本。有些维护者 接收附件，但是附件的内容格式应该是"text/plain"。然而，附件一般是不赞成的， 因为这会使补丁的引用部分在评论过程中变的很困难。 +同时也强烈建议在补丁或其他邮件的正文中使用纯文本格式。https://useplaintext.email +有助于了解如何配置你喜欢的邮件客户端，并在您还没有首选的情况下列出一些推荐的 +客户端。 + 用来发送Linux内核补丁的邮件客户端在发送补丁时应该处于文本的原始状态。例如， 他们不能改变或者删除制表符或者空格，甚至是在每一行的开头或者结尾。 @@ -40,17 +48,17 @@ Linux内核补丁是通过邮件被提交的，最好把补丁作为邮件体的 不要让你的邮件客户端进行自动换行。这样也会破坏你的补丁。 -邮件客户端不能改变文本的字符集编码方式。要发送的补丁只能是ASCII或者UTF-8编码方式， -如果你使用UTF-8编码方式发送邮件，那么你将会避免一些可能发生的字符集问题。 +邮件客户端不能改变文本的字符集编码方式。要发送的补丁只能是ASCII或者UTF-8编码 +方式，如果你使用UTF-8编码方式发送邮件，那么你将会避免一些可能发生的字符集问题。 -邮件客户端应该形成并且保持 References: 或者 In-Reply-To: 标题，那么 -邮件话题就不会中断。 +邮件客户端应该生成并且保持“References:”或者“In-Reply-To:”邮件头，这样邮件会话 +就不会中断。 -复制粘帖(或者剪贴粘帖)通常不能用于补丁，因为制表符会转换为空格。使用xclipboard, xclip -或者xcutsel也许可以，但是最好测试一下或者避免使用复制粘帖。 +复制粘帖(或者剪贴粘帖)通常不能用于补丁，因为制表符会转换为空格。使用xclipboard, +xclip或者xcutsel也许可以，但是最好测试一下或者避免使用复制粘帖。 -不要在使用PGP/GPG署名的邮件中包含补丁。这样会使得很多脚本不能读取和适用于你的补丁。 -（这个问题应该是可以修复的） +不要在使用PGP/GPG签名的邮件中包含补丁。这样会使得很多脚本不能读取和适用于你的 +补丁。（这个问题应该是可以修复的） 在给内核邮件列表发送补丁之前，给自己发送一个补丁是个不错的主意，保存接收到的 邮件，将补丁用'patch'命令打上，如果成功了，再给内核邮件列表发送。 @@ -58,98 +66,133 @@ Linux内核补丁是通过邮件被提交的，最好把补丁作为邮件体的 一些邮件客户端提示 ------------------ + 这里给出一些详细的MUA配置提示，可以用于给Linux内核发送补丁。这些并不意味是 所有的软件包配置总结。 说明： -TUI = 以文本为基础的用户接口 -GUI = 图形界面用户接口 + +- TUI = 以文本为基础的用户接口 +- GUI = 图形界面用户接口 Alpine (TUI) -~~~~~~~~~~~~ +************ 配置选项： -在"Sending Preferences"部分： -- "Do Not Send Flowed Text"必须开启 -- "Strip Whitespace Before Sending"必须关闭 +在 :menuselection:`Sending Preferences` 菜单： + +- :menuselection:`Do Not Send Flowed Text` 必须开启 +- :menuselection:`Strip Whitespace Before Sending` 必须关闭 + +当写邮件时，光标应该放在补丁会出现的地方，然后按下 :kbd:`CTRL-R` 组合键，使指 +定的补丁文件嵌入到邮件中。 + +Claws Mail (GUI) +**************** + +可以用，有人用它成功地发过补丁。 -当写邮件时，光标应该放在补丁会出现的地方，然后按下CTRL-R组合键，使指定的 -补丁文件嵌入到邮件中。 +用 :menuselection:`Message-->Insert File` (:kbd:`CTRL-I`) 或外置编辑器插入补丁。 + +若要在Claws编辑窗口重修改插入的补丁，需关闭 +:menuselection:`Configuration-->Preferences-->Compose-->Wrapping` +的 `Auto wrapping` 。 Evolution (GUI) -~~~~~~~~~~~~~~~ +*************** -一些开发者成功的使用它发送补丁 +一些开发者成功的使用它发送补丁。 -当选择邮件选项：Preformat - 从Format->Heading->Preformatted (Ctrl-7)或者工具栏 +撰写邮件时： +从 :menuselection:`格式-->段落样式-->预格式化` (:kbd:`CTRL-7`) +或工具栏选择 :menuselection:`预格式化` ； 然后使用： - Insert->Text File... (Alt-n x)插入补丁文件。 +:menuselection:`插入-->文本文件...` (:kbd:`ALT-N x`) 插入补丁文件。 -你还可以"diff -Nru old.c new.c | xclip"，选择Preformat，然后使用中间键进行粘帖。 +你还可以 ``diff -Nru old.c new.c | xclip`` ，选择 :menuselection:`预格式化` ， +然后使用鼠标中键进行粘帖。 Kmail (GUI) -~~~~~~~~~~~ +*********** 一些开发者成功的使用它发送补丁。 -默认设置不为HTML格式是合适的；不要启用它。 +默认撰写设置禁用HTML格式是合适的；不要启用它。 -当书写一封邮件的时候，在选项下面不要选择自动换行。唯一的缺点就是你在邮件中输入的任何文本 -都不会被自动换行，因此你必须在发送补丁之前手动换行。最简单的方法就是启用自动换行来书写邮件， -然后把它保存为草稿。一旦你在草稿中再次打开它，它已经全部自动换行了，那么你的邮件虽然没有 -选择自动换行，但是还不会失去已有的自动换行。 +当书写一封邮件的时候，在选项下面不要选择自动换行。唯一的缺点就是你在邮件中输 +入的任何文本都不会被自动换行，因此你必须在发送补丁之前手动换行。最简单的方法 +就是启用自动换行来书写邮件，然后把它保存为草稿。一旦你在草稿中再次打开它，它 +已经全部自动换行了，那么你的邮件虽然没有选择自动换行，但是还不会失去已有的自 +动换行。 -在邮件的底部，插入补丁之前，放上常用的补丁定界符：三个连字号(---)。 +在邮件的底部，插入补丁之前，放上常用的补丁定界符：三个连字符(``---``)。 -然后在"Message"菜单条目，选择插入文件，接着选取你的补丁文件。还有一个额外的选项，你可以 -通过它配置你的邮件建立工具栏菜单，还可以带上"insert file"图标。 +然后在 :menuselection:`信件` 菜单，选择 :menuselection:`插入文本文件` ，接 +着选取你的补丁文件。还有一个额外的选项，你可以通过它配置你的创建新邮件工具栏， +加上 :menuselection:`插入文本文件` 图标。 -你可以安全地通过GPG标记附件，但是内嵌补丁最好不要使用GPG标记它们。作为内嵌文本的签发补丁， -当从GPG中提取7位编码时会使他们变的更加复杂。 +将编辑器窗口拉到足够宽避免折行。对于KMail 1.13.5 (KDE 4.5.4)，它会在发送邮件 +时对编辑器窗口中显示折行的地方自动换行。在选项菜单中取消自动换行仍不能解决。 +因此，如果你的补丁中有非常长的行，必须在发送之前把编辑器窗口拉得非常宽。 +参见：https://bugs.kde.org/show_bug.cgi?id=174034 -如果你非要以附件的形式发送补丁，那么就右键点击附件，然后选中属性，突出"Suggest automatic -display"，这样内嵌附件更容易让读者看到。 +你可以安全地用GPG签名附件，但是内嵌补丁最好不要使用GPG签名它们。作为内嵌文本 +插入的签名补丁将使其难以从7-bit编码中提取。 -当你要保存将要发送的内嵌文本补丁，你可以从消息列表窗格选择包含补丁的邮件，然后右击选择 -"save as"。你可以使用一个没有更改的包含补丁的邮件，如果它是以正确的形式组成。当你正真在它 -自己的窗口之下察看，那时没有选项可以保存邮件--已经有一个这样的bug被汇报到了kmail的bugzilla -并且希望这将会被处理。邮件是以只针对某个用户可读写的权限被保存的，所以如果你想把邮件复制到其他地方， -你不得不把他们的权限改为组或者整体可读。 +如果你非要以附件的形式发送补丁，那么就右键点击附件，然后选择 +:menuselection:`属性` ，打开 :menuselection:`建议自动显示` ，使附件内联更容 +易让读者看到。 + +当你要保存将要发送的内嵌文本补丁，你可以从消息列表窗格选择包含补丁的邮件，然 +后右键选择 :menuselection:`另存为` 。如果整个电子邮件的组成正确，您可直接将 +其作为补丁使用。电子邮件以当前用户可读写权限保存，因此您必须 ``chmod`` ，以 +使其在复制到别处时用户组和其他人可读。 Lotus Notes (GUI) -~~~~~~~~~~~~~~~~~ +***************** 不要使用它。 +IBM Verse (Web GUI) +******************* + +同上条。 + Mutt (TUI) -~~~~~~~~~~ +********** + +很多Linux开发人员使用mutt客户端，这证明它肯定工作得非常漂亮。 -很多Linux开发人员使用mutt客户端，所以证明它肯定工作的非常漂亮。 +Mutt不自带编辑器，所以不管你使用什么编辑器，不自动断行就行。大多数编辑器都有 +:menuselection:`插入文件` 选项，它可以在不改变文件内容的情况下插入文件。 -Mutt不自带编辑器，所以不管你使用什么编辑器都不应该带有自动断行。大多数编辑器都带有 -一个"insert file"选项，它可以通过不改变文件内容的方式插入文件。 +用 ``vim`` 作为mutt的编辑器:: -'vim'作为mutt的编辑器： set editor="vi" - 如果使用xclip，敲入以下命令 +如果使用xclip，敲入以下命令:: + :set paste - 按中键之前或者shift-insert或者使用 + +然后再按中键或者shift-insert或者使用:: + :r filename -如果想要把补丁作为内嵌文本。 -(a)ttach工作的很好，不带有"set paste"。 +把补丁插入为内嵌文本。 +在未设置 ``set paste`` 时(a)ttach工作的很好。 你可以通过 ``git format-patch`` 生成补丁，然后用 Mutt发送它们:: - $ mutt -H 0001-some-bug-fix.patch + $ mutt -H 0001-some-bug-fix.patch 配置选项： + 它应该以默认设置的形式工作。 -然而，把"send_charset"设置为"us-ascii::utf-8"也是一个不错的主意。 +然而，把 ``send_charset`` 设置一下也是一个不错的主意:: + + set send_charset="us-ascii:utf-8" Mutt 是高度可配置的。 这里是个使用mutt通过 Gmail 发送的补丁的最小配置:: @@ -178,71 +221,107 @@ Mutt 是高度可配置的。 这里是个使用mutt通过 Gmail 发送的补丁 set from = "username@gmail.com" set use_from = yes -Mutt文档含有更多信息: +Mutt文档含有更多信息： - http://dev.mutt.org/trac/wiki/UseCases/Gmail + https://gitlab.com/muttmua/mutt/-/wikis/UseCases/Gmail - http://dev.mutt.org/doc/manual.html + http://www.mutt.org/doc/manual/ Pine (TUI) -~~~~~~~~~~ +********** Pine过去有一些空格删减问题，但是这些现在应该都被修复了。 -如果可以，请使用alpine(pine的继承者) +如果可以，请使用alpine（pine的继承者）。 配置选项： -- 最近的版本需要消除流程文本 -- "no-strip-whitespace-before-send"选项也是需要的。 + +- 最近的版本需要 ``quell-flowed-text`` +- ``no-strip-whitespace-before-send`` 选项也是需要的。 Sylpheed (GUI) -~~~~~~~~~~~~~~ +************** - 内嵌文本可以很好的工作（或者使用附件）。 - 允许使用外部的编辑器。 -- 对于目录较多时非常慢。 +- 收件箱较多时非常慢。 - 如果通过non-SSL连接，无法使用TLS SMTP授权。 -- 在组成窗口中有一个很有用的ruler bar。 -- 给地址本中添加地址就不会正确的了解显示名。 +- 撰写窗口的标尺很有用。 +- 将地址添加到通讯簿时无法正确理解显示的名称。 Thunderbird (GUI) -~~~~~~~~~~~~~~~~~ +***************** + +Thunderbird是Outlook的克隆版本，它很容易损坏文本，但也有一些方法强制修正。 + +在完成修改后（包括安装扩展），您需要重新启动Thunderbird。 + +- 允许使用外部编辑器： + + 使用Thunderbird发补丁最简单的方法是使用扩展来打开您最喜欢的外部编辑器。 + + 下面是一些能够做到这一点的扩展样例。 + + - “External Editor Revived” + + https://github.com/Frederick888/external-editor-revived + + https://addons.thunderbird.net/en-GB/thunderbird/addon/external-editor-revived/ + + 它需要安装“本地消息主机（native messaging host）”。 + 参见以下文档: + https://github.com/Frederick888/external-editor-revived/wiki + + - “External Editor” + + https://github.com/exteditor/exteditor + + 下载并安装此扩展，然后打开 :menuselection:`新建消息` 窗口, 用 + :menuselection:`查看-->工具栏-->自定义...` 给它增加一个按钮，直接点击此 + 按钮即可使用外置编辑器。 + + 请注意，“External Editor”要求你的编辑器不能fork，换句话说，编辑器必须在 + 关闭前不返回。你可能需要传递额外的参数或修改编辑器设置。最值得注意的是， + 如果您使用的是gvim，那么您必须将 :menuselection:`external editor` 设置的 + 编辑器字段设置为 ``/usr/bin/gvim --nofork"`` （假设可执行文件在 + ``/usr/bin`` ），以传递 ``-f`` 参数。如果您正在使用其他编辑器，请阅读其 + 手册了解如何处理。 -默认情况下，thunderbird很容易损坏文本，但是还有一些方法可以强制它变得更好。 +若要修正内部编辑器，请执行以下操作： -- 在用户帐号设置里，组成和寻址，不要选择"Compose messages in HTML format"。 +- 修改你的Thunderbird设置，不要使用 ``format=flowed`` ！ + 回到主窗口，按照 + :menuselection:`主菜单-->首选项-->常规-->配置编辑器...` + 打开Thunderbird的配置编辑器。 -- 编辑你的Thunderbird配置设置来使它不要拆行使用：user_pref("mailnews.wraplength", 0); + - 将 ``mailnews.send_plaintext_flowed`` 设为 ``false`` -- 编辑你的Thunderbird配置设置，使它不要使用"format=flowed"格式：user_pref("mailnews. - send_plaintext_flowed", false); + - 将 ``mailnews.wraplength`` 从 ``72`` 改为 ``0`` -- 你需要使Thunderbird变为预先格式方式： - 如果默认情况下你书写的是HTML格式，那不是很难。仅仅从标题栏的下拉框中选择"Preformat"格式。 - 如果默认情况下你书写的是文本格式，你不得把它改为HTML格式（仅仅作为一次性的）来书写新的消息， - 然后强制使它回到文本格式，否则它就会拆行。要实现它，在写信的图标上使用shift键来使它变为HTML - 格式，然后标题栏的下拉框中选择"Preformat"格式。 +- 不要写HTML邮件！ + 回到主窗口，打开 + :menuselection:`主菜单-->账户设置-->你的@邮件.地址-->通讯录/编写&地址簿` ， + 关掉 ``以HTML格式编写消息`` 。 -- 允许使用外部的编辑器： - 针对Thunderbird打补丁最简单的方法就是使用一个"external editor"扩展，然后使用你最喜欢的 - $EDITOR来读取或者合并补丁到文本中。要实现它，可以下载并且安装这个扩展，然后添加一个使用它的 - 按键View->Toolbars->Customize...最后当你书写信息的时候仅仅点击它就可以了。 +- 只用纯文本格式查看邮件！ + 回到主窗口， :menuselection:`主菜单-->查看-->消息体为-->纯文本` ！ TkRat (GUI) -~~~~~~~~~~~ +*********** 可以使用它。使用"Insert file..."或者外部的编辑器。 Gmail (Web GUI) -~~~~~~~~~~~~~~~ +*************** 不要使用它发送补丁。 Gmail网页客户端自动地把制表符转换为空格。 -虽然制表符转换为空格问题可以被外部编辑器解决，同时它还会使用回车换行把每行拆分为78个字符。 +虽然制表符转换为空格问题可以被外部编辑器解决，但它同时还会使用回车换行把每行 +拆分为78个字符。 -另一个问题是Gmail还会把任何不是ASCII的字符的信息改为base64编码。它把东西变的像欧洲人的名字。 +另一个问题是Gmail还会把任何含有非ASCII的字符的消息改用base64编码，如欧洲人的 +名字。 - ### diff --git a/Documentation/translations/zh_CN/process/submit-checklist.rst b/Documentation/translations/zh_CN/process/submit-checklist.rst index a64858d321fc..3d6ee21c74ae 100644 --- a/Documentation/translations/zh_CN/process/submit-checklist.rst +++ b/Documentation/translations/zh_CN/process/submit-checklist.rst @@ -1,105 +1,111 @@ .. include:: ../disclaimer-zh_CN.rst -:Original: :ref:`Documentation/process/submit-checklist.rst <submitchecklist>` -:Translator: Alex Shi <alex.shi@linux.alibaba.com> +:Original: Documentation/process/submit-checklist.rst +:Translator: + - Alex Shi <alexs@kernel.org> + - Wu XiangCheng <bobwxc@email.cn> .. _cn_submitchecklist: -Linux内核补丁提交清单 -~~~~~~~~~~~~~~~~~~~~~ +Linux内核补丁提交检查单 +~~~~~~~~~~~~~~~~~~~~~~~ 如果开发人员希望看到他们的内核补丁提交更快地被接受，那么他们应该做一些基本 的事情。 -这些都是在 -:ref:`Documentation/translations/zh_CN/process/submitting-patches.rst <cn_submittingpatches>` +这些都是在 Documentation/translations/zh_CN/process/submitting-patches.rst 和其他有关提交Linux内核补丁的文档中提供的。 -1) 如果使用工具，则包括定义/声明该工具的文件。不要依赖于其他头文件拉入您使用 +1) 如果使用工具，则包括定义/声明该工具的文件。不要依赖其他头文件来引入您使用 的头文件。 2) 干净的编译： - a) 使用适用或修改的 ``CONFIG`` 选项 ``=y``、``=m`` 和 ``=n`` 。没有GCC + a) 使用合适的 ``CONFIG`` 选项 ``=y``、``=m`` 和 ``=n`` 。没有 ``gcc`` 警告/错误，没有链接器警告/错误。 - b) 通过allnoconfig、allmodconfig + b) 通过 ``allnoconfig`` 、 ``allmodconfig`` c) 使用 ``O=builddir`` 时可以成功编译 -3) 通过使用本地交叉编译工具或其他一些构建场在多个CPU体系结构上构建。 + d) 任何 Doucmentation/ 下的变更都能成功构建且不引入新警告/错误。 + 用 ``make htmldocs`` 或 ``make pdfdocs`` 检验构建情况并修复问题。 + +3) 通过使用本地交叉编译工具或其他一些构建设施在多个CPU体系结构上构建。 4) PPC64是一种很好的交叉编译检查体系结构，因为它倾向于对64位的数使用无符号 长整型。 -5) 如下所述 :ref:`Documentation/translations/zh_CN/process/coding-style.rst <cn_codingstyle>`. - 检查您的补丁是否为常规样式。在提交（ ``scripts/check patch.pl`` ）之前， - 使用补丁样式检查器检查是否有轻微的冲突。您应该能够处理您的补丁中存在的所有 +5) 按 Documentation/translations/zh_CN/process/coding-style.rst 所述检查您的 + 补丁是否为常规样式。在提交之前使用补丁样式检查器 ``scripts/checkpatch.pl`` + 检查是否有轻微的冲突。您应该能够处理您的补丁中存在的所有 违规行为。 -6) 任何新的或修改过的 ``CONFIG`` 选项都不会弄脏配置菜单，并默认为关闭，除非 - 它们符合 ``Documentation/kbuild/kconfig-language.rst`` 中记录的异常条件, - 菜单属性：默认值. +6) 任何新的或修改过的 ``CONFIG`` 选项都不应搞乱配置菜单，并默认为关闭，除非 + 它们符合 ``Documentation/kbuild/kconfig-language.rst`` 菜单属性：默认值中 + 记录的例外条件。 7) 所有新的 ``kconfig`` 选项都有帮助文本。 8) 已仔细审查了相关的 ``Kconfig`` 组合。这很难用测试来纠正——脑力在这里是有 回报的。 -9) 用 sparse 检查干净。 +9) 通过 sparse 清查。 + （参见 Documentation/translations/zh_CN/dev-tools/sparse.rst ） 10) 使用 ``make checkstack`` 和 ``make namespacecheck`` 并修复他们发现的任何 问题。 .. note:: - ``checkstack`` 并没有明确指出问题，但是任何一个在堆栈上使用超过512 + ``checkstack`` 并不会明确指出问题，但是任何一个在堆栈上使用超过512 字节的函数都可以进行更改。 -11) 包括 :ref:`kernel-doc <kernel_doc>` 内核文档以记录全局内核API。（静态函数 - 不需要，但也可以。）使用 ``make htmldocs`` 或 ``make pdfdocs`` 检查 - :ref:`kernel-doc <kernel_doc>` 并修复任何问题。 +11) 包括 :ref:`kernel-doc <kernel_doc_zh>` 内核文档以记录全局内核API。（静态 + 函数不需要，但也可以。）使用 ``make htmldocs`` 或 ``make pdfdocs`` 检查 + :ref:`kernel-doc <kernel_doc_zh>` 并修复任何问题。 -12) 通过以下选项同时启用的测试 ``CONFIG_PREEMPT``, ``CONFIG_DEBUG_PREEMPT``, +12) 通过以下选项同时启用的测试： ``CONFIG_PREEMPT``, ``CONFIG_DEBUG_PREEMPT``, ``CONFIG_DEBUG_SLAB``, ``CONFIG_DEBUG_PAGEALLOC``, ``CONFIG_DEBUG_MUTEXES``, ``CONFIG_DEBUG_SPINLOCK``, ``CONFIG_DEBUG_ATOMIC_SLEEP``, - ``CONFIG_PROVE_RCU`` and ``CONFIG_DEBUG_OBJECTS_RCU_HEAD`` - -13) 已经过构建和运行时测试，包括有或没有 ``CONFIG_SMP``, ``CONFIG_PREEMPT``. + ``CONFIG_PROVE_RCU`` 和 ``CONFIG_DEBUG_OBJECTS_RCU_HEAD`` 。 -14) 如果补丁程序影响IO/磁盘等：使用或不使用 ``CONFIG_LBDAF`` 进行测试。 +13) 在 ``CONFIG_SMP``, ``CONFIG_PREEMPT`` 开启和关闭的情况下都进行构建和运行 + 时测试。 -15) 所有代码路径都已在启用所有lockdep功能的情况下运行。 +14) 所有代码路径都已在启用所有死锁检测（lockdep）功能的情况下运行。 -16) 所有新的/proc条目都记录在 ``Documentation/`` +15) 所有新的 ``/proc`` 条目都记录在 ``Documentation/`` -17) 所有新的内核引导参数都记录在 +16) 所有新的内核引导参数都记录在 Documentation/admin-guide/kernel-parameters.rst 中。 -18) 所有新的模块参数都记录在 ``MODULE_PARM_DESC()`` +17) 所有新的模块参数都记录在 ``MODULE_PARM_DESC()`` -19) 所有新的用户空间接口都记录在 ``Documentation/ABI/`` 中。有关详细信息， +18) 所有新的用户空间接口都记录在 ``Documentation/ABI/`` 中。有关详细信息， 请参阅 ``Documentation/ABI/README`` 。更改用户空间接口的补丁应该抄送 linux-api@vger.kernel.org。 -20) 已通过至少注入slab和page分配失败进行检查。请参阅 ``Documentation/fault-injection/`` +19) 已通过至少注入slab和page分配失败进行检查。请参阅 ``Documentation/fault-injection/`` 。 如果新代码是实质性的，那么添加子系统特定的故障注入可能是合适的。 -21) 新添加的代码已经用 ``gcc -W`` 编译（使用 ``make EXTRA-CFLAGS=-W`` ）。这 +20) 新添加的代码已经用 ``gcc -W`` 编译（使用 ``make EXTRA-CFLAGS=-W`` ）。这 将产生大量噪声，但对于查找诸如“警告：有符号和无符号之间的比较”之类的错误 很有用。 -22) 在它被合并到-mm补丁集中之后进行测试，以确保它仍然与所有其他排队的补丁以 +21) 在它被合并到-mm补丁集中之后进行测试，以确保它仍然与所有其他排队的补丁以 及VM、VFS和其他子系统中的各种更改一起工作。 -23) 所有内存屏障例如 ``barrier()``, ``rmb()``, ``wmb()`` 都需要源代码中的注 +22) 所有内存屏障（例如 ``barrier()``, ``rmb()``, ``wmb()`` ）都需要源代码注 释来解释它们正在执行的操作及其原因的逻辑。 -24) 如果补丁添加了任何ioctl，那么也要更新 ``Documentation/userspace-api/ioctl/ioctl-number.rst`` +23) 如果补丁添加了任何ioctl，那么也要更新 + ``Documentation/userspace-api/ioctl/ioctl-number.rst`` 。 -25) 如果修改后的源代码依赖或使用与以下 ``Kconfig`` 符号相关的任何内核API或 +24) 如果修改后的源代码依赖或使用与以下 ``Kconfig`` 符号相关的任何内核API或 功能，则在禁用相关 ``Kconfig`` 符号和/或 ``=m`` （如果该选项可用）的情况 下测试以下多个构建[并非所有这些都同时存在，只是它们的各种/随机组合]： - ``CONFIG_SMP``, ``CONFIG_SYSFS``, ``CONFIG_PROC_FS``, ``CONFIG_INPUT``, ``CONFIG_PCI``, ``CONFIG_BLOCK``, ``CONFIG_PM``, ``CONFIG_MAGIC_SYSRQ``, - ``CONFIG_NET``, ``CONFIG_INET=n`` (但是后者伴随 ``CONFIG_NET=y``). + ``CONFIG_SMP``, ``CONFIG_SYSFS``, ``CONFIG_PROC_FS``, ``CONFIG_INPUT``, + ``CONFIG_PCI``, ``CONFIG_BLOCK``, ``CONFIG_PM``, ``CONFIG_MAGIC_SYSRQ``, + ``CONFIG_NET``, ``CONFIG_INET=n`` （但是最后一个需要 ``CONFIG_NET=y`` ）。 diff --git a/Documentation/translations/zh_CN/process/submitting-patches.rst b/Documentation/translations/zh_CN/process/submitting-patches.rst index ebb7f37575c1..f8978f02057c 100644 --- a/Documentation/translations/zh_CN/process/submitting-patches.rst +++ b/Documentation/translations/zh_CN/process/submitting-patches.rst @@ -1,142 +1,92 @@ -.. _cn_submittingpatches: +.. SPDX-License-Identifier: GPL-2.0-or-later .. include:: ../disclaimer-zh_CN.rst -:Original: :ref:`Documentation/process/submitting-patches.rst <submittingpatches>` +.. _cn_submittingpatches: + +:Original: Documentation/process/submitting-patches.rst -译者:: +:译者: + - 钟宇 TripleX Chung <xxx.phy@gmail.com> + - 时奎亮 Alex Shi <alexs@kernel.org> + - 吴想成 Wu XiangCheng <bobwxc@email.cn> - 中文版维护者： 钟宇 TripleX Chung <xxx.phy@gmail.com> - 中文版翻译者： 钟宇 TripleX Chung <xxx.phy@gmail.com> - 时奎亮 Alex Shi <alex.shi@linux.alibaba.com> - 中文版校译者： 李阳 Li Yang <leoyang.li@nxp.com> - 王聪 Wang Cong <xiyou.wangcong@gmail.com> +:校译: + - 李阳 Li Yang <leoyang.li@nxp.com> + - 王聪 Wang Cong <xiyou.wangcong@gmail.com> -如何让你的改动进入内核 -====================== +提交补丁：如何让你的改动进入内核 +================================ 对于想要将改动提交到 Linux 内核的个人或者公司来说，如果不熟悉“规矩”， -提交的流程会让人畏惧。本文档收集了一系列建议，这些建议可以大大的提高你 +提交的流程会让人畏惧。本文档包含了一系列建议，可以大大提高你 的改动被接受的机会. -以下文档含有大量简洁的建议， 具体请见： -:ref:`Documentation/process <development_process_main>` -同样，:ref:`Documentation/translations/zh_CN/process/submit-checklist.rst <cn_submitchecklist>` -给出在提交代码前需要检查的项目的列表。 +本文档以较为简洁的行文给出了大量建议。关于内核开发流程如何进行的详细信息， +参见： Documentation/translations/zh_CN/process/development-process.rst 。 +Documentation/translations/zh_CN/process/submit-checklist.rst 给出了一系列 +提交补丁之前要检查的事项。设备树相关的补丁，请参阅 +Documentation/devicetree/bindings/submitting-patches.rst 。 -其中许多步骤描述了Git版本控制系统的默认行为；如果您使用Git来准备补丁， -您将发现它为您完成的大部分机械工作，尽管您仍然需要准备和记录一组合理的 -补丁。一般来说，使用git将使您作为内核开发人员的生活更轻松。 +本文档假设您正在使用 ``git`` 准备你的补丁。如果您不熟悉 ``git`` ，最好学习 +如何使用它，这将使您作为内核开发人员的生活变得更加轻松。 +部分子系统和维护人员的树有一些关于其工作流程和要求的额外信息，请参阅 +Documentation/process/maintainer-handbooks.rst 。 -0) 获取当前源码树 ------------------ +获取当前源码树 +-------------- -如果您没有一个可以使用当前内核源代码的存储库，请使用git获取一个。您将要 -从主线存储库开始，它可以通过以下方式获取:: +如果您手头没有当前内核源代码的存储库，请使用 ``git`` 获取一份。您需要先获取 +主线存储库，它可以通过以下命令拉取:: - git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git + git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git -但是，请注意，您可能不希望直接针对主线树进行开发。大多数子系统维护人员运 +但是，请注意，您可能不想直接针对主线树进行开发。大多数子系统维护人员运 行自己的树，并希望看到针对这些树准备的补丁。请参见MAINTAINERS文件中子系 -统的 **T:** 项以查找该树，或者简单地询问维护者该树是否未在其中列出。 - -仍然可以通过tarballs下载内核版本（如下一节所述），但这是进行内核开发的 -一种困难的方式。 - -1) "diff -up" -------------- - -使用 "diff -up" 或者 "diff -uprN" 来创建补丁。 - -所有内核的改动，都是以补丁的形式呈现的，补丁由 diff(1) 生成。创建补丁的 -时候，要确认它是以 "unified diff" 格式创建的，这种格式由 diff(1) 的 '-u' -参数生成。而且，请使用 '-p' 参数，那样会显示每个改动所在的C函数，使得 -产生的补丁容易读得多。补丁应该基于内核源代码树的根目录，而不是里边的任 -何子目录。 - -为一个单独的文件创建补丁，一般来说这样做就够了:: - - SRCTREE=linux - MYFILE=drivers/net/mydriver.c +统的 **T:** 项以查找该树，或者直接询问维护者该树是否未在其中列出。 - cd $SRCTREE - cp $MYFILE $MYFILE.orig - vi $MYFILE # make your change - cd .. - diff -up $SRCTREE/$MYFILE{.orig,} > /tmp/patch +.. _zh_describe_changes: -为多个文件创建补丁，你可以解开一个没有修改过的内核源代码树，然后和你自 -己的代码树之间做 diff 。例如:: - - MYSRC=/devel/linux - - tar xvfz linux-3.19.tar.gz - mv linux-3.19 linux-3.19-vanilla - diff -uprN -X linux-3.19-vanilla/Documentation/dontdiff \ - linux-3.19-vanilla $MYSRC > /tmp/patch - -"dontdiff" 是内核在编译的时候产生的文件的列表，列表中的文件在 diff(1) -产生的补丁里会被跳过。 - -确定你的补丁里没有包含任何不属于这次补丁提交的额外文件。记得在用diff(1) -生成补丁之后，审阅一次补丁，以确保准确。 - -如果你的改动很散乱，你应该研究一下如何将补丁分割成独立的部分，将改动分 -割成一系列合乎逻辑的步骤。这样更容易让其他内核开发者审核，如果你想你的 -补丁被接受，这是很重要的。请参阅： -:ref:`cn_split_changes` - -如果你用 ``git`` , ``git rebase -i`` 可以帮助你这一点。如果你不用 ``git``, -``quilt`` <https://savannah.nongnu.org/projects/quilt> 另外一个流行的选择。 - -.. _cn_describe_changes: - -2) 描述你的改动 ---------------- +描述你的改动 +------------ 描述你的问题。无论您的补丁是一行错误修复还是5000行新功能，都必须有一个潜在 -的问题激励您完成这项工作。让审稿人相信有一个问题值得解决，让他们读完第一段 -是有意义的。 +的问题激励您完成这项工作。说服审阅者相信有一个问题值得解决，让他们读完第一段 +后就能明白这一点。 描述用户可见的影响。直接崩溃和锁定是相当有说服力的，但并不是所有的错误都那么 -明目张胆。即使在代码审查期间发现了这个问题，也要描述一下您认为它可能对用户产 +明目张胆。即使在代码审阅期间发现了这个问题，也要描述一下您认为它可能对用户产 生的影响。请记住，大多数Linux安装运行的内核来自二级稳定树或特定于供应商/产品 的树，只从上游精选特定的补丁，因此请包含任何可以帮助您将更改定位到下游的内容： 触发的场景、DMESG的摘录、崩溃描述、性能回归、延迟尖峰、锁定等。 -量化优化和权衡。如果您声称在性能、内存消耗、堆栈占用空间或二进制大小方面有所 -改进，请包括支持它们的数字。但也要描述不明显的成本。优化通常不是免费的，而是 -在CPU、内存和可读性之间进行权衡；或者，探索性的工作，在不同的工作负载之间进 +质量优化和权衡。如果您声称在性能、内存消耗、堆栈占用空间或二进制大小方面有所 +改进，请包括支持它们的数据。但也要描述不明显的成本。优化通常不是零成本的，而是 +在CPU、内存和可读性之间进行权衡；或者，做探索性的工作，在不同的工作负载之间进 行权衡。请描述优化的预期缺点，以便审阅者可以权衡成本和收益。 -一旦问题建立起来，就要详细地描述一下您实际在做什么。对于审阅者来说，用简单的 -英语描述代码的变化是很重要的，以验证代码的行为是否符合您的意愿。 +提出问题之后，就要详细地描述一下您实际在做的技术细节。对于审阅者来说，用简练的 +英语描述代码的变化是很重要的，以验证代码的行为是否符合您的意图。 -如果您将补丁描述写在一个表单中，这个表单可以很容易地作为“提交日志”放入Linux -的源代码管理系统git中，那么维护人员将非常感谢您。见 :ref:`cn_explicit_in_reply_to`. +如果您将补丁描述写成“标准格式”，可以很容易地作为“提交日志”放入Linux的源代 +码管理系统 ``git`` 中，那么维护人员将非常感谢您。 +参见 :ref:`zh_the_canonical_patch_format` 。 每个补丁只解决一个问题。如果你的描述开始变长，这就表明你可能需要拆分你的补丁。 -请见 :ref:`cn_split_changes` +请见 :ref:`zh_split_changes` 。 -提交或重新提交修补程序或修补程序系列时，请包括完整的修补程序说明和理由。不要 +提交或重新提交补丁或补丁系列时，请包括完整的补丁说明和理由。不要 只说这是补丁（系列）的第几版。不要期望子系统维护人员引用更早的补丁版本或引用 URL来查找补丁描述并将其放入补丁中。也就是说，补丁（系列）及其描述应该是独立的。 -这对维护人员和审查人员都有好处。一些评审者可能甚至没有收到补丁的早期版本。 +这对维护人员和审阅者都有好处。一些审阅者可能甚至没有收到补丁的早期版本。 -描述你在命令语气中的变化，例如“make xyzzy do frotz”而不是“[This patch]make +用祈使句描述你的变更，例如“make xyzzy do frotz”而不是“[This patch]make xyzzy do frotz”或“[I]changed xyzzy to do frotz”，就好像你在命令代码库改变 它的行为一样。 -如果修补程序修复了一个记录的bug条目，请按编号和URL引用该bug条目。如果补丁来 -自邮件列表讨论，请给出邮件列表存档的URL；使用带有 ``Message-ID`` 的 -https://lore.kernel.org/ 重定向，以确保链接不会过时。 - -但是，在没有外部资源的情况下，尽量让你的解释可理解。除了提供邮件列表存档或 -bug的URL之外，还要总结需要提交补丁的相关讨论要点。 - -如果您想要引用一个特定的提交，不要只引用提交的 SHA-1 ID。还请包括提交的一行 +如果您想要引用一个特定的提交，不要只引用提交的SHA-1 ID。还请包括提交的一行 摘要，以便于审阅者了解它是关于什么的。例如:: Commit e21d2170f36602ae2708 ("video: remove unnecessary @@ -144,82 +94,104 @@ bug的URL之外，还要总结需要提交补丁的相关讨论要点。 platform_set_drvdata(), but left the variable "dev" unused, delete it. -您还应该确保至少使用前12位 SHA-1 ID. 内核存储库包含*许多*对象，使与较短的ID +您还应该确保至少使用前12位SHA-1 ID。内核存储库包含 *许多* 对象，使较短的ID 发生冲突的可能性很大。记住，即使现在不会与您的六个字符ID发生冲突，这种情况 -可能五年后改变。 +也可能在五年后改变。 + +如果该变更的相关讨论或背景信息可以在网上查阅，请加上“Link:”标签指向它。例如 +你的补丁修复了一个缺陷，需要添加一个带有URL的标签指向邮件列表存档或缺陷跟踪器 +的相关报告；如果该补丁是由一些早先邮件列表讨论或网络上的记录引起的，请指向它。 + +当链接到邮件列表存档时，请首选lore.kernel.org邮件存档服务。用邮件中的 +``Message-ID`` 头（去掉尖括号）可以创建链接URL。例如:: + + Link: https://lore.kernel.org/r/30th.anniversary.repost@klaava.Helsinki.FI/ + +请检查该链接以确保可用且指向正确的邮件。 -如果修补程序修复了特定提交中的错误，例如，使用 ``git bisct`` ，请使用带有前 -12个字符SHA-1 ID 的"Fixes:"标记和单行摘要。为了简化不要将标记拆分为多个， -行、标记不受分析脚本“75列换行”规则的限制。例如:: +不过，在没有外部资源的情况下，也要尽量让你的解释可理解。除了提供邮件列表存档或 +缺陷的URL之外，还要需要总结该补丁的相关讨论要点。 - Fixes: 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") +如果补丁修复了特定提交中的错误，例如使用 ``git bisct`` 发现了一个问题，请使用 +带有前12个字符SHA-1 ID的“Fixes:”标签和单行摘要。为了简化解析脚本，不要将该 +标签拆分为多行，标签不受“75列换行”规则的限制。例如:: -下列 ``git config`` 设置可以添加让 ``git log``, ``git show`` 漂亮的显示格式:: + Fixes: 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") + +下列 ``git config`` 设置可以让 ``git log``, ``git show`` 增加上述风格的显示格式:: [core] abbrev = 12 [pretty] fixes = Fixes: %h (\"%s\") -.. _cn_split_changes: +使用示例:: + + $ git log -1 --pretty=fixes 54a4f0239f2e + Fixes: 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") -3) 拆分你的改动 ---------------- +.. _zh_split_changes: -将每个逻辑更改分隔成一个单独的补丁。 +拆分你的改动 +------------ + +将每个 **逻辑更改** 拆分成一个单独的补丁。 例如，如果你的改动里同时有bug修正和性能优化，那么把这些改动拆分到两个或 -者更多的补丁文件中。如果你的改动包含对API的修改，并且修改了驱动程序来适 -应这些新的API，那么把这些修改分成两个补丁。 +者更多的补丁文件中。如果你的改动包含对API的修改，并且增加了一个使用该新API +的驱动，那么把这些修改分成两个补丁。 另一方面，如果你将一个单独的改动做成多个补丁文件，那么将它们合并成一个 单独的补丁文件。这样一个逻辑上单独的改动只被包含在一个补丁文件里。 -如果有一个补丁依赖另外一个补丁来完成它的改动，那没问题。简单的在你的补 -丁描述里指出“这个补丁依赖某补丁”就好了。 +需要记住的一点是，每个补丁的更改都应易于理解，以便审阅者验证。每个补丁都应该 +对其价值进行阐述。 + +如果有一个补丁依赖另外一个补丁来完成它的改动，那没问题。直接在你的补 +丁描述里指出 **“这个补丁依赖某补丁”** 就好了。 -在将您的更改划分为一系列补丁时，要特别注意确保内核在系列中的每个补丁之后 -都能正常构建和运行。使用 ``git bisect`` 来追踪问题的开发者可能会在任何时 -候分割你的补丁系列；如果你在中间引入错误，他们不会感谢你。 +在将您的更改划分为一系列补丁时，要特别注意确保内核在应用系列中的每个补丁之后 +都能正常构建和运行。使用 ``git bisect`` 来追踪问题的开发者可能会在任何地方分 +割你的补丁系列；如果你在中间引入错误，他们不会感谢你。 -如果你不能将补丁浓缩成更少的文件，那么每次大约发送出15个，然后等待审查 +如果你不能将补丁系列浓缩得更小，那么每次大约发送出15个补丁，然后等待审阅 和集成。 -4) 检查你的更改风格 -------------------- +检查你的更改风格 +---------------- -检查您的补丁是否存在基本样式冲突，详细信息可在 -:ref:`Documentation/translations/zh_CN/process/coding-style.rst <cn_codingstyle>` -中找到。如果不这样做，只会浪费审稿人的时间，并且会导致你的补丁被拒绝，甚至 +检查您的补丁是否违反了基本样式规定，详细信息参见 +Documentation/translations/zh_CN/process/coding-style.rst +中找到。如果不这样做，只会浪费审阅者的时间，并且会导致你的补丁被拒绝，甚至 可能没有被阅读。 一个重要的例外是在将代码从一个文件移动到另一个文件时——在这种情况下，您不应 该在移动代码的同一个补丁中修改移动的代码。这清楚地描述了移动代码和您的更改 -的行为。这大大有助于审查实际差异，并允许工具更好地跟踪代码本身的历史。 +的行为。这大大有助于审阅实际差异，并允许工具更好地跟踪代码本身的历史。 在提交之前，使用补丁样式检查程序检查补丁（scripts/check patch.pl）。不过， 请注意，样式检查程序应该被视为一个指南，而不是作为人类判断的替代品。如果您 -的代码看起来更好，但有违规行为，那么最好不要使用它。 +的代码看起来更好，但有违规行为，那么最好别管它。 检查者报告三个级别： - ERROR：很可能出错的事情 - - WARNING：需要仔细审查的事项 + - WARNING：需要仔细审阅的事项 - CHECK：需要思考的事情 您应该能够判断您的补丁中存在的所有违规行为。 -5) 选择补丁收件人 ------------------ +选择补丁收件人 +-------------- -您应该总是在任何补丁上复制相应的子系统维护人员，以获得他们维护的代码；查看 +您应该总是知会任何补丁相应代码的子系统维护人员；查看 维护人员文件和源代码修订历史记录，以了解这些维护人员是谁。脚本 -scripts/get_Maintainer.pl在这个步骤中非常有用。如果您找不到正在工作的子系统 +scripts/get_maintainer.pl在这个步骤中非常有用。如果您找不到正在工作的子系统 的维护人员，那么Andrew Morton（akpm@linux-foundation.org）将充当最后的维护 人员。 -您通常还应该选择至少一个邮件列表来接收补丁集的。linux-kernel@vger.kernel.org -作为最后一个解决办法的列表，但是这个列表上的体积已经引起了许多开发人员的拒绝。 +您通常还应该选择至少一个邮件列表来接收补丁集的副本。linux-kernel@vger.kernel.org +是所有补丁的默认列表，但是这个列表的流量已经导致了许多开发人员不再看它。 在MAINTAINERS文件中查找子系统特定的列表；您的补丁可能会在那里得到更多的关注。 不过，请不要发送垃圾邮件到无关的列表。 @@ -229,189 +201,170 @@ http://vger.kernel.org/vger-lists.html 上找到它们的列表。不过，也 不要一次发送超过15个补丁到vger邮件列表！！！！ -Linus Torvalds 是决定改动能否进入 Linux 内核的最终裁决者。他的 e-mail -地址是 <torvalds@linux-foundation.org> 。他收到的 e-mail 很多，所以一般 -的说，最好别给他发 e-mail。 - -如果您有修复可利用安全漏洞的补丁，请将该补丁发送到 security@kernel.org。对于 -严重的bug，可以考虑短期暂停以允许分销商向用户发布补丁；在这种情况下，显然不应 -将补丁发送到任何公共列表。 +Linus Torvalds是决定改动能否进入 Linux 内核的最终裁决者。他的邮件地址是 +torvalds@linux-foundation.org 。他收到的邮件很多，所以一般来说最好 **别** +给他发邮件。 -修复已发布内核中严重错误的补丁程序应该指向稳定版维护人员，方法是放这样的一行:: +如果您有修复可利用安全漏洞的补丁，请将该补丁发送到 security@kernel.org 。对于 +严重的bug，可以考虑短期禁令以允许分销商（有时间）向用户发布补丁；在这种情况下， +显然不应将补丁发送到任何公共列表。 +参见 Documentation/translations/zh_CN/admin-guide/security-bugs.rst 。 - Cc: stable@vger.kernel.org +修复已发布内核中严重错误的补丁程序应该抄送给稳定版维护人员，方法是把以下列行 +放进补丁的签准区（注意，不是电子邮件收件人）:: -进入补丁的签准区（注意，不是电子邮件收件人）。除了这个文件之外，您还应该阅读 -:ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>` + Cc: stable@vger.kernel.org -但是，请注意，一些子系统维护人员希望得出他们自己的结论，即哪些补丁应该被放到 -稳定的树上。尤其是网络维护人员，不希望看到单个开发人员在补丁中添加像上面这样 -的行。 +除了本文件之外，您还应该阅读 +Documentation/translations/zh_CN/process/stable-kernel-rules.rst 。 -如果更改影响到用户和内核接口，请向手册页维护人员（如维护人员文件中所列）发送 +如果更改影响到用户侧内核接口，请向手册页维护人员（如维护人员文件中所列）发送 手册页补丁，或至少发送更改通知，以便一些信息进入手册页。还应将用户空间API -更改复制到 linux-api@vger.kernel.org。 +更改抄送到 linux-api@vger.kernel.org 。 -6) 没有 MIME 编码，没有链接，没有压缩，没有附件，只有纯文本 ------------------------------------------------------------ +不要MIME编码，不要链接，不要压缩，不要附件，只要纯文本 +------------------------------------------------------ Linus 和其他的内核开发者需要阅读和评论你提交的改动。对于内核开发者来说 -，可以“引用”你的改动很重要，使用一般的 e-mail 工具，他们就可以在你的 +，可以“引用”你的改动很重要，使用一般的邮件工具，他们就可以在你的 代码的任何位置添加评论。 -因为这个原因，所有的提交的补丁都是 e-mail 中“内嵌”的。 +因为这个原因，所有的提交的补丁都是邮件中“内嵌”的。最简单（和推荐）的方法就 +是使用 ``git send-email`` 。https://git-send-email.io 有 ``git send-email`` +的交互式教程。 + +如果你选择不用 ``git send-email`` ： .. warning:: - 如果你使用剪切-粘贴你的补丁，小心你的编辑器的自动换行功能破坏你的补丁 -不要将补丁作为 MIME 编码的附件，不管是否压缩。很多流行的 e-mail 软件不 -是任何时候都将 MIME 编码的附件当作纯文本发送的，这会使得别人无法在你的 -代码中加评论。另外，MIME 编码的附件会让 Linus 多花一点时间来处理，这就 -降低了你的改动被接受的可能性。 + 如果你使用剪切-粘贴你的补丁，小心你的编辑器的自动换行功能破坏你的补丁 -例外：如果你的邮递员弄坏了补丁，那么有人可能会要求你使用mime重新发送补丁 +不要将补丁作为MIME编码的附件，不管是否压缩。很多流行的邮件软件不 +是任何时候都将MIME编码的附件当作纯文本发送的，这会使得别人无法在你的 +代码中加评论。另外，MIME编码的附件会让Linus多花一点时间来处理，这就 +降低了你的改动被接受的可能性。 -请参阅 :ref:`Documentation/translations/zh_CN/process/email-clients.rst <cn_email_clients>` -以获取有关配置电子邮件客户端以使其不受影响地发送修补程序的提示。 +例外：如果你的邮路损坏了补丁，那么有人可能会要求你使用MIME重新发送补丁。 -7) e-mail 的大小 ----------------- +请参阅 Documentation/translations/zh_CN/process/email-clients.rst +以获取有关配置电子邮件客户端以使其不受影响地发送补丁的提示。 -大的改动对邮件列表不合适，对某些维护者也不合适。如果你的补丁，在不压缩 -的情况下，超过了300kB，那么你最好将补丁放在一个能通过 internet 访问的服 -务器上，然后用指向你的补丁的 URL 替代。但是请注意，如果您的补丁超过了 -300kb，那么它几乎肯定需要被破坏。 +回复审阅意见 +------------ -8）回复评审意见 ---------------- +你的补丁几乎肯定会得到审阅者对补丁改进方法的评论（以回复邮件的形式）。您必须 +对这些评论作出回应；让补丁被忽略的一个好办法就是忽略审阅者的意见。直接回复邮 +件来回应意见即可。不会导致代码更改的意见或问题几乎肯定会带来注释或变更日志的 +改变，以便下一个审阅者更好地了解正在发生的事情。 -你的补丁几乎肯定会得到评审者对补丁改进方法的评论。您必须对这些评论作出 -回应；让补丁被忽略的一个好办法就是忽略审阅者的意见。不会导致代码更改的 -意见或问题几乎肯定会带来注释或变更日志的改变，以便下一个评审者更好地了解 -正在发生的事情。 +一定要告诉审阅者你在做什么改变，并感谢他们的时间。代码审阅是一个累人且耗时的 +过程，审阅者有时会变得暴躁。即使在这种情况下，也要礼貌地回应并解决他们指出的 +问题。当发送下一版时，在封面邮件或独立补丁里加上 ``patch changelog`` 说明与 +前一版本的不同之处（参见 :ref:`zh_the_canonical_patch_format` ）。 -一定要告诉审稿人你在做什么改变，并感谢他们的时间。代码审查是一个累人且 -耗时的过程，审查人员有时会变得暴躁。即使在这种情况下，也要礼貌地回应并 -解决他们指出的问题。 +.. _zh_resend_reminders: -9）不要泄气或不耐烦 -------------------- +不要泄气或不耐烦 +---------------- -提交更改后，请耐心等待。审阅者是忙碌的人，可能无法立即访问您的修补程序。 +提交更改后，请耐心等待。审阅者是大忙人，可能无法立即审阅您的补丁。 -曾几何时，补丁曾在没有评论的情况下消失在空白中，但开发过程比现在更加顺利。 +曾几何时，补丁曾在没收到评论的情况下消失在虚空中，但现在开发过程应该更加顺利了。 您应该在一周左右的时间内收到评论；如果没有收到评论，请确保您已将补丁发送 -到正确的位置。在重新提交或联系审阅者之前至少等待一周-在诸如合并窗口之类的 +到正确的位置。在重新提交或联系审阅者之前至少等待一周——在诸如合并窗口之类的 繁忙时间可能更长。 -10）主题中包含 PATCH --------------------- +在等了几个星期后，用带RESEND的主题重发补丁也是可以的:: -由于到linus和linux内核的电子邮件流量很高，通常会在主题行前面加上[PATCH] -前缀. 这使Linus和其他内核开发人员更容易将补丁与其他电子邮件讨论区分开。 + [PATCH Vx RESEND] sub/sys: Condensed patch summary -11）签署你的作品-开发者原始认证 -------------------------------- +当你发布补丁（系列）修改版的时候，不要加上“RESEND”——“RESEND”只适用于重 +新提交之前未经修改的补丁（系列）。 -为了加强对谁做了何事的追踪，尤其是对那些透过好几层的维护者的补丁，我们 -建议在发送出去的补丁上加一个 “sign-off” 的过程。 +主题中包含 PATCH +---------------- -"sign-off" 是在补丁的注释的最后的简单的一行文字，认证你编写了它或者其他 +由于到Linus和linux-kernel的电子邮件流量很高，通常会在主题行前面加上[PATCH] +前缀。这使Linus和其他内核开发人员更容易将补丁与其他电子邮件讨论区分开。 + +``git send-email`` 会自动为你加上。 + +签署你的作品——开发者来源认证 +------------------------------ + +为了加强对谁做了何事的追踪，尤其是对那些透过好几层维护者才最终到达的补丁，我 +们在通过邮件发送的补丁上引入了“签署（sign-off）”流程。 + +“签署”是在补丁注释最后的一行简单文字，认证你编写了它或者其他 人有权力将它作为开放源代码的补丁传递。规则很简单：如果你能认证如下信息: -开发者来源证书 1.1 +开发者来源认证 1.1 ^^^^^^^^^^^^^^^^^^ 对于本项目的贡献，我认证如下信息： - （a）这些贡献是完全或者部分的由我创建，我有权利以文件中指出 + (a) 这些贡献是完全或者部分的由我创建，我有权利以文件中指出 的开放源代码许可证提交它；或者 - （b）这些贡献基于以前的工作，据我所知，这些以前的工作受恰当的开放 - 源代码许可证保护，而且，根据许可证，我有权提交修改后的贡献， + + (b) 这些贡献基于以前的工作，据我所知，这些以前的工作受恰当的开放 + 源代码许可证保护，而且，根据文件中指出的许可证，我有权提交修改后的贡献， 无论是完全还是部分由我创造，这些贡献都使用同一个开放源代码许可证 - （除非我被允许用其它的许可证），正如文件中指出的；或者 - （c）这些贡献由认证（a），（b）或者（c）的人直接提供给我，而 + （除非我被允许用其它的许可证）；或者 + + (c) 这些贡献由认证（a），（b）或者（c）的人直接提供给我，而 且我没有修改它。 - （d）我理解并同意这个项目和贡献是公开的，贡献的记录（包括我 - 一起提交的个人记录，包括 sign-off ）被永久维护并且可以和这个项目 + + (d) 我理解并同意这个项目和贡献是公开的，贡献的记录（包括我 + 一起提交的个人记录，包括sign-off）被永久维护并且可以和这个项目 或者开放源代码的许可证同步地再发行。 那么加入这样一行:: - Signed-off-by: Random J Developer <random@developer.example.org> - -使用你的真名（抱歉，不能使用假名或者匿名。） - -有人在最后加上标签。现在这些东西会被忽略，但是你可以这样做，来标记公司 -内部的过程，或者只是指出关于 sign-off 的一些特殊细节。 - -如果您是子系统或分支维护人员，有时需要稍微修改收到的补丁，以便合并它们， -因为树和提交者中的代码不完全相同。如果你严格遵守规则（c），你应该要求提交者 -重新发布，但这完全是在浪费时间和精力。规则（b）允许您调整代码，但是更改一个 -提交者的代码并让他认可您的错误是非常不礼貌的。要解决此问题，建议在最后一个 -由签名行和您的行之间添加一行，指示更改的性质。虽然这并不是强制性的，但似乎 -在描述前加上您的邮件和/或姓名（全部用方括号括起来），这足以让人注意到您对最 -后一分钟的更改负有责任。例如:: - - Signed-off-by: Random J Developer <random@developer.example.org> - [lucky@maintainer.example.org: struct foo moved from foo.c to foo.h] - Signed-off-by: Lucky K Maintainer <lucky@maintainer.example.org> - -如果您维护一个稳定的分支机构，同时希望对作者进行致谢、跟踪更改、合并修复并 -保护提交者不受投诉，那么这种做法尤其有用。请注意，在任何情况下都不能更改作者 -的ID（From 头），因为它是出现在更改日志中的标识。 - -对回合（back-porters）的特别说明：在提交消息的顶部（主题行之后）插入一个补丁 -的起源指示似乎是一种常见且有用的实践，以便于跟踪。例如，下面是我们在3.x稳定 -版本中看到的内容:: - - Date: Tue Oct 7 07:26:38 2014 -0400 - - libata: Un-break ATA blacklist - - commit 1c40279960bcd7d52dbdf1d466b20d24b99176c8 upstream. - -还有， 这里是一个旧版内核中的一个回合补丁:: + Signed-off-by: Random J Developer <random@developer.example.org> - Date: Tue May 13 22:12:27 2008 +0200 +使用你的真名（抱歉，不能使用假名或者匿名。）如果使用 ``git commit -s`` 的话 +将会自动完成。撤销也应当包含“Signed-off-by”， ``git revert -s`` 会帮你搞定。 - wireless, airo: waitbusy() won't delay +有些人会在最后加上额外的标签。现在这些东西会被忽略，但是你可以这样做，来标记 +公司内部的过程，或者只是指出关于签署的一些特殊细节。 - [backport of 2.6 commit b7acbdfbd1f277c1eb23f344f899cfa4cd0bf36a] +作者签署之后的任何其他签署（Signed-off-by:'s）均来自处理和传递补丁的人员，但 +未参与其开发。签署链应当反映补丁传播到维护者并最终传播到Linus所经过的 **真实** +路径，首个签署指明单个作者的主要作者身份。 -12）何时使用Acked-by:，CC:，和Co-Developed by: ----------------------------------------------- +何时使用Acked-by:，CC:，和Co-Developed by: +------------------------------------------ -Singed-off-by: 标记表示签名者参与了补丁的开发，或者他/她在补丁的传递路径中。 +Singed-off-by: 标签表示签名者参与了补丁的开发，或者他/她在补丁的传递路径中。 -如果一个人没有直接参与补丁的准备或处理，但希望表示并记录他们对补丁的批准， -那么他们可以要求在补丁的变更日志中添加一个 Acked-by: +如果一个人没有直接参与补丁的准备或处理，但希望表示并记录他们对补丁的批准/赞成， +那么他们可以要求在补丁的变更日志中添加一个Acked-by:。 -Acked-by：通常由受影响代码的维护者使用，当该维护者既没有贡献也没有转发补丁时。 +Acked-by: 通常由受影响代码的维护者使用，当该维护者既没有贡献也没有转发补丁时。 -Acked-by: 不像签字人那样正式。这是一个记录，确认人至少审查了补丁，并表示接受。 -因此，补丁合并有时会手动将Acker的“Yep，looks good to me”转换为 Acked-By：（但 +Acked-by: 不像签署那样正式。这是一个记录，确认人至少审阅了补丁，并表示接受。 +因此，补丁合并有时会手动将Acker的“Yep，looks good to me”转换为 Acked-By:（但 请注意，通常最好要求一个明确的Ack）。 Acked-by：不一定表示对整个补丁的确认。例如，如果一个补丁影响多个子系统，并且 -有一个：来自一个子系统维护者，那么这通常表示只确认影响维护者代码的部分。这里 -应该仔细判断。如有疑问，应参考邮件列表档案中的原始讨论。 +有一个来自某个子系统维护者的Acked-By:，那么这通常表示只确认影响维护者代码的部 +分。这里应该仔细判断。如有疑问，应参考邮件列表存档中的原始讨论。 -如果某人有机会对补丁进行评论，但没有提供此类评论，您可以选择在补丁中添加 ``Cc:`` -这是唯一一个标签，它可以在没有被它命名的人显式操作的情况下添加，但它应该表明 -这个人是在补丁上抄送的。讨论中包含了潜在利益相关方。 +如果某人本应有机会对补丁进行评论，但没有提供此类评论，您可以选择在补丁中添加 +``Cc:`` 这是唯一可以在没有被该人明确同意的情况下添加的标签——但它应该表明 +这个人是在补丁上抄送的。此标签记录了讨论中包含的潜在利益相关方。 Co-developed-by: 声明补丁是由多个开发人员共同创建的；当几个人在一个补丁上工 -作时，它用于将属性赋予共同作者（除了 From: 所赋予的作者之外）。因为 -Co-developed-by: 表示作者身份，所以每个共同开发人：必须紧跟在相关合作作者的 -签名之后。标准的签核程序要求：标记的签核顺序应尽可能反映补丁的时间历史，而不 -管作者是通过 From ：还是由 Co-developed-by: 共同开发的。值得注意的是，最后一 -个签字人：必须始终是提交补丁的开发人员。 +作时，它用于给出共同作者（除了From:所给出的作者之外）。因为Co-developed-by: +表示作者身份，所以每个Co-developed-by:必须紧跟在相关合作作者的签署之后。标准 +签署程序要求Singed-off-by:标签的顺序应尽可能反映补丁的时间历史，无论作者是通 +过From:还是Co-developed-by:表明。值得注意的是，最后一个Singed-off-by:必须是 +提交补丁的开发人员。 -注意，当作者也是电子邮件标题“发件人：”行中列出的人时，“From: ” 标记是可选的。 +注意，如果From:作者也是电子邮件标题的From:行中列出的人，则From:标签是可选的。 -作者提交的补丁程序示例:: +被From:作者提交的补丁示例:: <changelog> @@ -421,7 +374,7 @@ Co-developed-by: 表示作者身份，所以每个共同开发人：必须紧跟 Signed-off-by: Second Co-Author <second@coauthor.example.org> Signed-off-by: From Author <from@author.example.org> -合作开发者提交的补丁示例:: +被合作开发者提交的补丁示例:: From: From Author <from@author.example.org> @@ -434,76 +387,85 @@ Co-developed-by: 表示作者身份，所以每个共同开发人：必须紧跟 Signed-off-by: Submitting Co-Author <sub@coauthor.example.org> -13）使用报告人：、测试人：、审核人：、建议人：、修复人： --------------------------------------------------------- +使用Reported-by:、Tested-by:、Reviewed-by:、Suggested-by:和Fixes: +----------------------------------------------------------------- Reported-by: 给那些发现错误并报告错误的人致谢，它希望激励他们在将来再次帮助 -我们。请注意，如果bug是以私有方式报告的，那么在使用Reported-by标记之前，请 -先请求权限。 +我们。请注意，如果bug是以私有方式报告的，那么在使用Reported-by标签之前，请 +先请求许可。此标签是为Bug设计的；请不要将其用于感谢功能请求。 -Tested-by: 标记表示补丁已由指定的人（在某些环境中）成功测试。这个标签通知 -维护人员已经执行了一些测试，为将来的补丁提供了一种定位测试人员的方法，并确 -保测试人员的信誉。 +Tested-by: 标签表示补丁已由指定的人（在某些环境中）成功测试。这个标签通知 +维护人员已经执行了一些测试，为将来的补丁提供了一种定位测试人员的方法，并彰显测试人员的功劳。 -Reviewed-by：相反，根据审查人的声明，表明该补丁已被审查并被认为是可接受的： +Reviewed-by：根据审阅者的监督声明，表明该补丁已被审阅并被认为是可接受的： -审查人的监督声明 +审阅者的监督声明 ^^^^^^^^^^^^^^^^ -通过提供我的 Reviewed-by，我声明： +通过提供我的Reviewed-by:标签，我声明： - (a) 我已经对这个补丁进行了一次技术审查，以评估它是否适合被包含到 + (a) 我已经对这个补丁进行了一次技术审阅，以评估它是否适合被包含到 主线内核中。 (b) 与补丁相关的任何问题、顾虑或问题都已反馈给提交者。我对提交者对 我的评论的回应感到满意。 - (c) 虽然这一提交可能会改进一些东西，但我相信，此时，（1）对内核 + (c) 虽然这一提交可能仍可被改进，但我相信，此时，（1）对内核 进行了有价值的修改，（2）没有包含争论中涉及的已知问题。 - (d) 虽然我已经审查了补丁并认为它是健全的，但我不会（除非另有明确 - 说明）作出任何保证或保证它将在任何给定情况下实现其规定的目的 + (d) 虽然我已经审阅了补丁并认为它是健全的，但我不会（除非另有明确 + 说明）作出任何保证或担保它会在任何给定情况下实现其规定的目的 或正常运行。 -Reviewed-by 是一种观点声明，即补丁是对内核的适当修改，没有任何遗留的严重技术 -问题。任何感兴趣的审阅者（完成工作的人）都可以为一个补丁提供一个 Review-by -标签。此标签用于向审阅者提供致谢，并通知维护者已在修补程序上完成的审阅程度。 -Reviewed-by: 当由已知了解主题区域并执行彻底检查的审阅者提供时，通常会增加 +Reviewed-by是一种观点声明，即补丁是对内核的适当修改，没有任何遗留的严重技术 +问题。任何感兴趣的审阅者（完成工作的人）都可以为一个补丁提供一个Reviewed-by +标签。此标签用于向审阅者提供致谢，并通知维护者补丁的审阅进度。 +当Reviewed-by:标签由已知了解主题区域并执行彻底检查的审阅者提供时，通常会增加 补丁进入内核的可能性。 +一旦从测试人员或审阅者的“Tested-by”和“Reviewed-by”标签出现在邮件列表中， +作者应在发送下一个版本时将其添加到适用的补丁中。但是，如果补丁在以下版本中发 +生了实质性更改，这些标签可能不再适用，因此应该删除。通常，在补丁更改日志中 +（在 ``---`` 分隔符之后）应该提到删除某人的测试者或审阅者标签。 + Suggested-by: 表示补丁的想法是由指定的人提出的，并确保将此想法归功于指定的 人。请注意，未经许可，不得添加此标签，特别是如果该想法未在公共论坛上发布。 -这就是说，如果我们勤快地致谢我们的创意者，他们很有希望在未来得到鼓舞，再次 +也就是说，如果我们勤快地致谢创意提供者，他们将受到鼓舞，很有希望在未来再次 帮助我们。 -Fixes: 指示补丁在以前的提交中修复了一个问题。它可以很容易地确定错误的来源， -这有助于检查错误修复。这个标记还帮助稳定内核团队确定应该接收修复的稳定内核 -版本。这是指示补丁修复的错误的首选方法。请参阅 :ref:`cn_describe_changes` -描述您的更改以了解更多详细信息。 +Fixes: 指示补丁修复了之前提交的一个问题。它可以便于确定错误的来源，这有助于 +检查错误修复。这个标签还帮助稳定内核团队确定应该接收修复的稳定内核版本。这是 +指示补丁修复的错误的首选方法。请参阅 :ref:`zh_describe_changes` 了解更多信息。 -.. _cn_the_canonical_patch_format: +.. note:: -12）标准补丁格式 ----------------- + 附加Fixes:标签不会改变稳定内核规则流程，也不改变所有稳定版补丁抄送 + stable@vger.kernel.org的要求。有关更多信息，请阅读 + Documentation/translations/zh_CN/process/stable-kernel-rules.rst 。 + +.. _zh_the_canonical_patch_format: + +标准补丁格式 +------------ 本节描述如何格式化补丁本身。请注意，如果您的补丁存储在 ``Git`` 存储库中，则 -可以使用 ``git format-patch`` 进行正确的补丁格式设置。但是，这些工具无法创建 +可以使用 ``git format-patch`` 进行正确的补丁格式化。但是，这些工具无法创建 必要的文本，因此请务必阅读下面的说明。 -标准的补丁，标题行是:: +标准的补丁标题行是:: Subject: [PATCH 001/123] 子系统:一句话概述 -标准补丁的信体存在如下部分： +标准补丁的信体包含如下部分： - - 一个 "from" 行指出补丁作者。后跟空行（仅当发送修补程序的人不是作者时才需要）。 + - 一个 ``from`` 行指出补丁作者。后跟空行（仅当发送补丁的人不是作者时才需要）。 - - 解释的正文，行以75列包装，这将被复制到永久变更日志来描述这个补丁。 + - 说明文字，每行最长75列，这将被复制到永久变更日志来描述这个补丁。 - 一个空行 - - 上面描述的“Signed-off-by” 行，也将出现在更改日志中。 + - 上述的 ``Signed-off-by:`` 行，也将出现在更改日志中。 - 只包含 ``---`` 的标记线。 @@ -511,29 +473,29 @@ Fixes: 指示补丁在以前的提交中修复了一个问题。它可以很容 - 实际补丁（ ``diff`` 输出）。 -标题行的格式，使得对标题行按字母序排序非常的容易 - 很多 e-mail 客户端都 -可以支持 - 因为序列号是用零填充的，所以按数字排序和按字母排序是一样的。 +标题行的格式，使得对标题行按字母序排序非常的容易——很多邮件客户端都 +可以支持——因为序列号是用零填充的，所以按数字排序和按字母排序是一样的。 -e-mail 标题中的“子系统”标识哪个内核子系统将被打补丁。 +邮件标题中的“子系统”标识哪个内核子系统将被打补丁。 -e-mail 标题中的“一句话概述”扼要的描述 e-mail 中的补丁。“一句话概述” +邮件标题中的“一句话概述”扼要的描述邮件中的补丁。“一句话概述” 不应该是一个文件名。对于一个补丁系列（“补丁系列”指一系列的多个相关补 丁），不要对每个补丁都使用同样的“一句话概述”。 -记住 e-mail 的“一句话概述”会成为该补丁的全局唯一标识。它会蔓延到 git +记住邮件的“一句话概述”会成为该补丁的全局唯一标识。它会进入 ``git`` 的改动记录里。然后“一句话概述”会被用在开发者的讨论里，用来指代这个补 -丁。用户将希望通过 google 来搜索"一句话概述"来找到那些讨论这个补丁的文 +丁。用户将希望通过搜索引擎搜索“一句话概述”来找到那些讨论这个补丁的文 章。当人们在两三个月后使用诸如 ``gitk`` 或 ``git log --oneline`` 之类 的工具查看数千个补丁时，也会很快看到它。 出于这些原因，概述必须不超过70-75个字符，并且必须描述补丁的更改以及为 -什么需要补丁。既要简洁又要描述性很有挑战性，但写得好的概述应该这样做。 +什么需要补丁。既要简洁又要描述性很有挑战性，但写得好的概述应该这样。 概述的前缀可以用方括号括起来：“Subject: [PATCH <tag>...] <概述>”。标记 不被视为概述的一部分，而是描述应该如何处理补丁。如果补丁的多个版本已发 -送出来以响应评审（即“v1，v2，v3”）或“rfc”，以指示评审请求，那么通用标记 -可能包括版本描述符。如果一个补丁系列中有四个补丁，那么各个补丁可以这样 -编号：1/4、2/4、3/4、4/4。这可以确保开发人员了解补丁应用的顺序，并且他们 +送出来以响应评审（即“v1，v2，v3”）则必须包含版本号，或包含“RFC”以指示 +评审请求。如果一个补丁系列中有四个补丁，那么各个补丁可以这样编号：1/4、2/4、 +3/4、4/4。这可以确保开发人员了解补丁应用的顺序，且 已经查看或应用了补丁系列中的所有补丁。 一些标题的例子:: @@ -541,95 +503,134 @@ e-mail 标题中的“一句话概述”扼要的描述 e-mail 中的补丁。 Subject: [patch 2/5] ext2: improve scalability of bitmap searching Subject: [PATCHv2 001/207] x86: fix eflags tracking -"From" 行是信体里的最上面一行，具有如下格式： +``From`` 行是信体里的最上面一行，具有如下格式:: + From: Patch Author <author@example.com> -"From" 行指明在永久改动日志里，谁会被确认为作者。如果没有 "From" 行，那 -么邮件头里的 "From: " 行会被用来决定改动日志中的作者。 +``From`` 行指明在永久改动日志里，谁会被确认为作者。如果没有 ``From`` 行，那 +么邮件头里的 ``From:`` 行会被用来决定改动日志中的作者。 -说明的主题将会被提交到永久的源代码改动日志里，因此对那些早已经不记得和 -这个补丁相关的讨论细节的有能力的读者来说，是有意义的。包括补丁程序定位 -错误的（内核日志消息、OOPS消息等）症状，对于搜索提交日志以寻找适用补丁的人 -尤其有用。如果一个补丁修复了一个编译失败，那么可能不需要包含所有编译失败； +说明文字将会被提交到永久的源代码改动日志里，因此应针对那些早已经不记得和这 +个补丁相关的讨论细节的读者。包括补丁处理的故障症状（内核日志消息、oops消息 +等），这对于可能正在搜索提交日志以查找适用补丁的人特别有用。文本应该写得如 +此详细，以便在数周、数月甚至数年后阅读时，能够为读者提供所需的细节信息，以 +掌握创建补丁的 **原因** 。 + +如果一个补丁修复了一个编译失败，那么可能不需要包含 *所有* 编译失败； 只要足够让搜索补丁的人能够找到它就行了。与概述一样，既要简洁又要描述性。 -"---" 标记行对于补丁处理工具要找到哪里是改动日志信息的结束，是不可缺少 +``---`` 标记行对于补丁处理工具要找到哪里是改动日志信息的结束，是不可缺少 的。 -对于 "---" 标记之后的额外注解，一个好的用途就是用来写 diffstat，用来显 -示修改了什么文件和每个文件都增加和删除了多少行。diffstat 对于比较大的补 -丁特别有用。其余那些只是和时刻或者开发者相关的注解，不合适放到永久的改 -动日志里的，也应该放这里。 -使用 diffstat的选项 "-p 1 -w 70" 这样文件名就会从内核源代码树的目录开始 +对于 ``---`` 标记之后的额外注解，一个好的用途就是用来写 ``diffstat`` ，用来显 +示修改了什么文件和每个文件都增加和删除了多少行。 ``diffstat`` 对于比较大的补 +丁特别有用。 +使用 ``diffstat`` 的选项 ``-p 1 -w 70`` 这样文件名就会从内核源代码树的目录开始 ，不会占用太宽的空间（很容易适合80列的宽度，也许会有一些缩进。） +（ ``git`` 默认会生成合适的diffstat。） + +其余那些只适用于当时或者与维护者相关的注解，不合适放到永久的改动日志里的，也 +应该放这里。较好的例子就是 ``补丁更改记录`` ，记录了v1和v2版本补丁之间的差异。 + +请将此信息放在将变更日志与补丁的其余部分分隔开的 ``---`` 行 **之后** 。版本 +信息不是提交到git树的变更日志的一部分。只是供审阅人员使用的附加信息。如果将 +其放置在提交标记上方，则需要手动交互才能将其删除。如果它位于分隔线以下，则在 +应用补丁时会自动剥离:: + + <commit message> + ... + Signed-off-by: Author <author@mail> + --- + V2 -> V3: Removed redundant helper function + V1 -> V2: Cleaned up coding style and addressed review comments -在后面的参考资料中能看到适当的补丁格式的更多细节。 + path/to/file | 5+++-- + ... -.. _cn_explicit_in_reply_to: +在后面的参考资料中能看到正确补丁格式的更多细节。 -15) 明确回复邮件头(In-Reply-To) -------------------------------- +.. _zh_backtraces: -手动添加回复补丁的的标题头(In-Reply_To:) 是有帮助的（例如，使用 ``git send-email`` ） -将补丁与以前的相关讨论关联起来，例如，将bug修复程序链接到电子邮件和bug报告。 +提交消息中的回溯（Backtraces） +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +回溯有助于记录导致问题的调用链。然而，并非所有回溯都有帮助。例如，早期引导调 +用链是独特而明显的。而逐字复制完整的dmesg输出则会增加时间戳、模块列表、寄存 +器和堆栈转储等分散注意力的信息。 + +因此，最有用的回溯应该从转储中提取相关信息，以更容易集中在真实问题上。下面是 +一个剪裁良好的回溯示例:: + + unchecked MSR access error: WRMSR to 0xd51 (tried to write 0x0000000000000064) + at rIP: 0xffffffffae059994 (native_write_msr+0x4/0x20) + Call Trace: + mba_wrmsr + update_domains + rdtgroup_mkdir + +.. _zh_explicit_in_reply_to: + +明确回复邮件头（In-Reply-To） +----------------------------- + +手动添加回复补丁的的邮件头（In-Reply_To:）是有用的（例如，使用 ``git send-email`` ）， +可以将补丁与以前的相关讨论关联起来，例如，将bug补丁链接到电子邮件和bug报告。 但是，对于多补丁系列，最好避免在回复时使用链接到该系列的旧版本。这样， -补丁的多个版本就不会成为电子邮件客户端中无法管理的引用序列。如果链接有用， +补丁的多个版本就不会成为电子邮件客户端中无法管理的引用树。如果链接有用， 可以使用 https://lore.kernel.org/ 重定向器（例如，在封面电子邮件文本中） 链接到补丁系列的早期版本。 -16) 发送git pull请求 --------------------- - -如果您有一系列补丁，那么让维护人员通过git pull操作将它们直接拉入子系统存储 -库可能是最方便的。但是，请注意，从开发人员那里获取补丁比从邮件列表中获取补 -丁需要更高的信任度。因此，许多子系统维护人员不愿意接受请求，特别是来自新的 -未知开发人员的请求。如果有疑问，您可以在封面邮件中使用pull 请求作为补丁系列 -正常发布的一个选项，让维护人员可以选择使用其中之一。 - -pull 请求的主题行中应该有[Git Pull]。请求本身应该在一行中包含存储库名称和 -感兴趣的分支；它应该看起来像:: +给出基础树信息 +-------------- - Please pull from +当其他开发人员收到您的补丁并开始审阅时，知道应该将您的工作放到代码树历史记录 +中的什么位置通常很有用。这对于自动化持续集成流水（CI）特别有用，这些流水线试 +图运行一系列测试，以便在维护人员开始审阅之前确定提交的质量。 - git://jdelvare.pck.nerim.net/jdelvare-2.6 i2c-for-linus +如果您使用 ``git format-patch`` 生成补丁，则可以通过 ``--base`` 标志在提交中 +自动包含基础树信息。使用此选项最简单、最方便的方法是配合主题分支:: - to get these changes: + $ git checkout -t -b my-topical-branch master + Branch 'my-topical-branch' set up to track local branch 'master'. + Switched to a new branch 'my-topical-branch' + [perform your edits and commits] -pull 请求还应该包含一条整体消息，说明请求中将包含什么，一个补丁本身的 ``Git shortlog`` -以及一个显示补丁系列整体效果的 ``diffstat`` 。当然，将所有这些信息收集在一起 -的最简单方法是让 ``git`` 使用 ``git request-pull`` 命令为您完成这些工作。 + $ git format-patch --base=auto --cover-letter -o outgoing/ master + outgoing/0000-cover-letter.patch + outgoing/0001-First-Commit.patch + outgoing/... -一些维护人员（包括Linus）希望看到来自已签名提交的请求；这增加了他们对你的 -请求信心。特别是，在没有签名标签的情况下，Linus 不会从像 Github 这样的公共 -托管站点拉请求。 +当你编辑 ``outgoing/0000-cover-letter.patch`` 时，您会注意到在它的最底部有一 +行 ``base-commit:`` 尾注，它为审阅者和CI工具提供了足够的信息以正确执行 +``git am`` 而不必担心冲突:: -创建此类签名的第一步是生成一个 GNRPG 密钥，并由一个或多个核心内核开发人员对 -其进行签名。这一步对新开发人员来说可能很困难，但没有办法绕过它。参加会议是 -找到可以签署您的密钥的开发人员的好方法。 + $ git checkout -b patch-review [base-commit-id] + Switched to a new branch 'patch-review' + $ git am patches.mbox + Applying: First Commit + Applying: ... -一旦您在Git 中准备了一个您希望有人拉的补丁系列，就用 ``git tag -s`` 创建一 -个签名标记。这将创建一个新标记，标识该系列中的最后一次提交，并包含用您的私 -钥创建的签名。您还可以将changelog样式的消息添加到标记中；这是一个描述拉请求 -整体效果的理想位置。 +有关此选项的更多信息，请参阅 ``man git-format-patch`` 。 -如果维护人员将要从中提取的树不是您正在使用的存储库，请不要忘记将已签名的标记 -显式推送到公共树。 +.. note:: -生成拉请求时，请使用已签名的标记作为目标。这样的命令可以实现:: + ``--base`` 功能是在2.9.0版git中引入的。 - git request-pull master git://my.public.tree/linux.git my-signed-tag +如果您不使用git格式化补丁，仍然可以包含相同的 ``base-commit`` 尾注，以指示您 +的工作所基于的树的提交哈希。你应该在封面邮件或系列的第一个补丁中添加它，它应 +该放在 ``---`` 行的下面或所有其他内容之后，即只在你的电子邮件签名之前。 参考文献 -------- -Andrew Morton, "The perfect patch" (tpp). +Andrew Morton，“完美的补丁”（tpp） <https://www.ozlabs.org/~akpm/stuff/tpp.txt> -Jeff Garzik, "Linux kernel patch submission format". +Jeff Garzik，“Linux内核补丁提交格式” <https://web.archive.org/web/20180829112450/http://linux.yyz.us/patch-format.html> -Greg Kroah-Hartman, "How to piss off a kernel subsystem maintainer". +Greg Kroah-Hartman，“如何惹恼内核子系统维护人员” <http://www.kroah.com/log/linux/maintainer.html> <http://www.kroah.com/log/linux/maintainer-02.html> @@ -642,16 +643,15 @@ Greg Kroah-Hartman, "How to piss off a kernel subsystem maintainer". <http://www.kroah.com/log/linux/maintainer-06.html> -NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people! +不！！！别再发巨型补丁炸弹给linux-kernel@vger.kernel.org的人们了！ <https://lore.kernel.org/r/20050711.125305.08322243.davem@davemloft.net> -Kernel Documentation/process/coding-style.rst: - :ref:`Documentation/translations/zh_CN/process/coding-style.rst <cn_codingstyle>` +内核 Documentation/translations/zh_CN/process/coding-style.rst -Linus Torvalds's mail on the canonical patch format: +Linus Torvalds关于标准补丁格式的邮件 <https://lore.kernel.org/r/Pine.LNX.4.58.0504071023190.28951@ppc970.osdl.org> -Andi Kleen, "On submitting kernel patches" - Some strategies to get difficult or controversial changes in. +Andi Kleen，“提交补丁之路” + 一些帮助合入困难或有争议的变更的策略。 http://halobates.de/on-submitting-patches.pdf diff --git a/Documentation/translations/zh_CN/scheduler/sched-design-CFS.rst b/Documentation/translations/zh_CN/scheduler/sched-design-CFS.rst index 26b0f36f793d..3076402406c4 100644 --- a/Documentation/translations/zh_CN/scheduler/sched-design-CFS.rst +++ b/Documentation/translations/zh_CN/scheduler/sched-design-CFS.rst @@ -80,7 +80,7 @@ p->se.vruntime。一旦p->se.vruntime变得足够大，其它的任务将成为 CFS使用纳秒粒度的计时，不依赖于任何jiffies或HZ的细节。因此CFS并不像之前的调度器那样 有“时间片”的概念，也没有任何启发式的设计。唯一可调的参数（你需要打开CONFIG_SCHED_DEBUG）是： - /proc/sys/kernel/sched_min_granularity_ns + /sys/kernel/debug/sched/min_granularity_ns 它可以用来将调度器从“桌面”模式（也就是低时延）调节为“服务器”（也就是高批处理）模式。 它的默认设置是适合桌面的工作负载。SCHED_BATCH也被CFS调度器模块处理。 diff --git a/Documentation/translations/zh_TW/oops-tracing.txt b/Documentation/translations/zh_TW/oops-tracing.txt deleted file mode 100644 index be8e59f2abaf..000000000000 --- a/Documentation/translations/zh_TW/oops-tracing.txt +++ /dev/null @@ -1,212 +0,0 @@ -Chinese translated version of Documentation/admin-guide/bug-hunting.rst - -If you have any comment or update to the content, please contact the -original document maintainer directly. However, if you have a problem -communicating in English you can also ask the Chinese maintainer for -help. Contact the Chinese maintainer if this translation is outdated -or if there is a problem with the translation. - -Traditional Chinese maintainer: Hu Haowen <src.res@email.cn> ---------------------------------------------------------------------- -Documentation/admin-guide/bug-hunting.rst 的繁體中文版翻譯 - -如果想評論或更新本文的內容，請直接聯繫原文檔的維護者。如果你使用英文 -交流有困難的話，也可以向繁體中文版維護者求助。如果本翻譯更新不及時或 -者翻譯存在問題，請聯繫繁體中文版維護者。 - -繁體中文版維護者： 胡皓文 Hu Haowen <src.res@email.cn> -繁體中文版翻譯者： 胡皓文 Hu Haowen <src.res@email.cn> -繁體中文版校譯者： 胡皓文 Hu Haowen <src.res@email.cn> - -以下爲正文 ---------------------------------------------------------------------- - -注意： ksymoops 在2.6中是沒有用的。 請以原有格式使用Oops(來自dmesg，等等)。 -忽略任何這樣那樣關於「解碼Oops」或者「通過ksymoops運行」的文檔。 如果你貼出運行過 -ksymoops的來自2.6的Oops，人們只會讓你重貼一次。 - -快速總結 -------------- - -發現Oops並發送給看似相關的內核領域的維護者。別太擔心對不上號。如果你不確定就發給 -和你所做的事情相關的代碼的負責人。 如果可重現試著描述怎樣重構。 那甚至比oops更有 -價值。 - -如果你對於發送給誰一無所知， 發給linux-kernel@vger.kernel.org。感謝你幫助Linux -儘可能地穩定。 - -Oops在哪裡? ----------------------- - -通常Oops文本由klogd從內核緩衝區里讀取並傳給syslogd，由syslogd寫到syslog文件中， -典型地是/var/log/messages(依賴於/etc/syslog.conf)。有時klogd崩潰了,這種情況下你 -能夠運行dmesg > file來從內核緩衝區中讀取數據並保存下來。 否則你可以 -cat /proc/kmsg > file， 然而你必須介入中止傳輸， kmsg是一個「永不結束的文件」。如 -果機器崩潰壞到你不能輸入命令或者磁碟不可用那麼你有三種選擇:- - -（1） 手抄屏幕上的文本待機器重啓後再輸入計算機。 麻煩但如果沒有針對崩潰的準備， -這是僅有的選擇。 另外，你可以用數位相機把屏幕拍下來-不太好，但比沒有強。 如果信 -息滾動到了終端的上面，你會發現以高分辯率啓動（比如，vga=791）會讓你讀到更多的文 -本。（注意：這需要vesafb，所以對『早期』的oops沒有幫助） - -（2）用串口終端啓動（請參看Documentation/admin-guide/serial-console.rst），運行一個null -modem到另一台機器並用你喜歡的通訊工具獲取輸出。Minicom工作地很好。 - -（3）使用Kdump（請參看Documentation/admin-guide/kdump/kdump.rst）， -使用在Documentation/admin-guide/kdump/gdbmacros.txt中定義的dmesg gdb宏，從舊的內存中提取內核 -環形緩衝區。 - -完整信息 ----------------- - -注意：以下來自於Linus的郵件適用於2.4內核。 我因爲歷史原因保留了它，並且因爲其中 -一些信息仍然適用。 特別注意的是，請忽略任何ksymoops的引用。 - -From: Linus Torvalds <torvalds@osdl.org> - -怎樣跟蹤Oops.. [原發到linux-kernel的一封郵件] - -主要的竅門是有五年和這些煩人的oops消息打交道的經驗;-) - -實際上，你有辦法使它更簡單。我有兩個不同的方法： - - gdb /usr/src/linux/vmlinux - gdb> disassemble <offending_function> - -那是發現問題的簡單辦法，至少如果bug報告做的好的情況下（象這個一樣-運行ksymoops -得到oops發生的函數及函數內的偏移）。 - -哦，如果報告發生的內核以相同的編譯器和相似的配置編譯它會有幫助的。 - -另一件要做的事是反彙編bug報告的「Code」部分：ksymoops也會用正確的工具來做這件事， -但如果沒有那些工具你可以寫一個傻程序： - - char str[] = "\xXX\xXX\xXX..."; - main(){} - -並用gcc -g編譯它然後執行「disassemble str」（XX部分是由Oops報告的值-你可以僅剪切 -粘貼並用「\x」替換空格-我就是這麼做的，因爲我懶得寫程序自動做這一切）。 - -另外，你可以用scripts/decodecode這個shell腳本。它的使用方法是： -decodecode < oops.txt - -「Code」之後的十六進位字節可能（在某些架構上）有一些當前指令之前的指令字節以及 -當前和之後的指令字節 - -Code: f9 0f 8d f9 00 00 00 8d 42 0c e8 dd 26 11 c7 a1 60 ea 2b f9 8b 50 08 a1 -64 ea 2b f9 8d 34 82 8b 1e 85 db 74 6d 8b 15 60 ea 2b f9 <8b> 43 04 39 42 54 -7e 04 40 89 42 54 8b 43 04 3b 05 00 f6 52 c0 - -最後，如果你想知道代碼來自哪裡，你可以： - - cd /usr/src/linux - make fs/buffer.s # 或任何產生BUG的文件 - -然後你會比gdb反彙編更清楚的知道發生了什麼。 - -現在，問題是把你所擁有的所有數據結合起來：C源碼（關於它應該怎樣的一般知識）， -彙編代碼及其反彙編得到的代碼（另外還有從「oops」消息得到的寄存器狀態-對了解毀壞的 -指針有用，而且當你有了彙編代碼你也能拿其它的寄存器和任何它們對應的C表達式做匹配 -）。 - -實際上，你僅需看看哪裡不匹配（這個例子是「Code」反彙編和編譯器生成的代碼不匹配）。 -然後你須要找出爲什麼不匹配。通常很簡單-你看到代碼使用了空指針然後你看代碼想知道 -空指針是怎麼出現的，還有檢查它是否合法.. - -現在，如果明白這是一項耗時的工作而且需要一丁點兒的專心，沒錯。這就是我爲什麼大多 -只是忽略那些沒有符號表信息的崩潰報告的原因：簡單的說太難查找了（我有一些 -程序用於在內核代碼段中搜索特定的模式，而且有時我也已經能找出那些崩潰的地方，但是 -僅僅是找出正確的序列也確實需要相當紮實的內核知識） - -_有時_會發生這種情況，我僅看到崩潰中的反彙編代碼序列， 然後我馬上就明白問題出在 -哪裡。這時我才意識到自己幹這個工作已經太長時間了;-) - - Linus - - ---------------------------------------------------------------------------- -關於Oops跟蹤的註解： - -爲了幫助Linus和其它內核開發者，klogd納入了大量的支持來處理保護錯誤。爲了擁有對 -地址解析的完整支持至少應該使用1.3-pl3的sysklogd包。 - -當保護錯誤發生時，klogd守護進程自動把內核日誌信息中的重要地址翻譯成它們相應的符 -號。 - -klogd執行兩種類型的地址解析。首先是靜態翻譯其次是動態翻譯。靜態翻譯和ksymoops -一樣使用System.map文件。爲了做靜態翻譯klogd守護進程必須在初始化時能找到system -map文件。關於klogd怎樣搜索map文件請參看klogd手冊頁。 - -動態地址翻譯在使用內核可裝載模塊時很重要。 因爲內核模塊的內存是從內核動態內存池 -里分配的，所以不管是模塊開始位置還是模塊中函數和符號的位置都不是固定的。 - -內核支持允許程序決定裝載哪些模塊和它們在內存中位置的系統調用。使用這些系統調用 -klogd守護進程生成一張符號表用於調試發生在可裝載模塊中的保護錯誤。 - -至少klogd會提供產生保護錯誤的模塊名。還可有額外的符號信息供可裝載模塊開發者選擇 -以從模塊中輸出符號信息。 - -因爲內核模塊環境可能是動態的，所以必須有一種機制當模塊環境發生改變時來通知klogd -守護進程。 有一些可用的命令行選項允許klogd向當前執行中的守護進程發送信號，告知符 -號信息應該被刷新了。 更多信息請參看klogd手冊頁。 - -sysklogd發布時包含一個補丁修改了modules-2.0.0包，無論何時一個模塊裝載或者卸載都 -會自動向klogd發送信號。打上這個補丁提供了必要的對調試發生於內核可裝載模塊的保護 -錯誤的無縫支持。 - -以下是被klogd處理過的發生在可裝載模塊中的一個保護錯誤例子： ---------------------------------------------------------------------------- -Aug 29 09:51:01 blizard kernel: Unable to handle kernel paging request at virtual address f15e97cc -Aug 29 09:51:01 blizard kernel: current->tss.cr3 = 0062d000, %cr3 = 0062d000 -Aug 29 09:51:01 blizard kernel: *pde = 00000000 -Aug 29 09:51:01 blizard kernel: Oops: 0002 -Aug 29 09:51:01 blizard kernel: CPU: 0 -Aug 29 09:51:01 blizard kernel: EIP: 0010:[oops:_oops+16/3868] -Aug 29 09:51:01 blizard kernel: EFLAGS: 00010212 -Aug 29 09:51:01 blizard kernel: eax: 315e97cc ebx: 003a6f80 ecx: 001be77b edx: 00237c0c -Aug 29 09:51:01 blizard kernel: esi: 00000000 edi: bffffdb3 ebp: 00589f90 esp: 00589f8c -Aug 29 09:51:01 blizard kernel: ds: 0018 es: 0018 fs: 002b gs: 002b ss: 0018 -Aug 29 09:51:01 blizard kernel: Process oops_test (pid: 3374, process nr: 21, stackpage=00589000) -Aug 29 09:51:01 blizard kernel: Stack: 315e97cc 00589f98 0100b0b4 bffffed4 0012e38e 00240c64 003a6f80 00000001 -Aug 29 09:51:01 blizard kernel: 00000000 00237810 bfffff00 0010a7fa 00000003 00000001 00000000 bfffff00 -Aug 29 09:51:01 blizard kernel: bffffdb3 bffffed4 ffffffda 0000002b 0007002b 0000002b 0000002b 00000036 -Aug 29 09:51:01 blizard kernel: Call Trace: [oops:_oops_ioctl+48/80] [_sys_ioctl+254/272] [_system_call+82/128] -Aug 29 09:51:01 blizard kernel: Code: c7 00 05 00 00 00 eb 08 90 90 90 90 90 90 90 90 89 ec 5d c3 ---------------------------------------------------------------------------- - -Dr. G.W. Wettstein Oncology Research Div. Computing Facility -Roger Maris Cancer Center INTERNET: greg@wind.rmcc.com -820 4th St. N. -Fargo, ND 58122 -Phone: 701-234-7556 - - ---------------------------------------------------------------------------- -受汙染的內核 - -一些oops報告在程序記數器之後包含字符串'Tainted: '。這表明內核已經被一些東西給汙 -染了。 該字符串之後緊跟著一系列的位置敏感的字符，每個代表一個特定的汙染值。 - - 1：'G'如果所有裝載的模塊都有GPL或相容的許可證，'P'如果裝載了任何的專有模塊。 -沒有模塊MODULE_LICENSE或者帶有insmod認爲是與GPL不相容的的MODULE_LICENSE的模塊被 -認定是專有的。 - - 2：'F'如果有任何通過「insmod -f」被強制裝載的模塊，' '如果所有模塊都被正常裝載。 - - 3：'S'如果oops發生在SMP內核中，運行於沒有證明安全運行多處理器的硬體。 當前這種 -情況僅限於幾種不支持SMP的速龍處理器。 - - 4：'R'如果模塊通過「insmod -f」被強制裝載，' '如果所有模塊都被正常裝載。 - - 5：'M'如果任何處理器報告了機器檢查異常，' '如果沒有發生機器檢查異常。 - - 6：'B'如果頁釋放函數發現了一個錯誤的頁引用或者一些非預期的頁標誌。 - - 7：'U'如果用戶或者用戶應用程式特別請求設置汙染標誌，否則' '。 - - 8：'D'如果內核剛剛死掉，比如有OOPS或者BUG。 - -使用'Tainted: '字符串的主要原因是要告訴內核調試者，這是否是一個乾淨的內核亦或發 -生了任何的不正常的事。汙染是永久的：即使出錯的模塊已經被卸載了，汙染值仍然存在， -以表明內核不再值得信任。 - diff --git a/Documentation/userspace-api/index.rst b/Documentation/userspace-api/index.rst index a61eac0c73f8..c78da9ce0ec4 100644 --- a/Documentation/userspace-api/index.rst +++ b/Documentation/userspace-api/index.rst @@ -26,6 +26,7 @@ place where this information is gathered. ioctl/index iommu media/index + netlink/index sysfs-platform_profile vduse futex2 diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst index 3b985b19f39d..5f81e2a24a5c 100644 --- a/Documentation/userspace-api/ioctl/ioctl-number.rst +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst @@ -308,7 +308,6 @@ Code Seq# Include File Comments 0x89 00-06 arch/x86/include/asm/sockios.h 0x89 0B-DF linux/sockios.h 0x89 E0-EF linux/sockios.h SIOCPROTOPRIVATE range -0x89 E0-EF linux/dn.h PROTOPRIVATE range 0x89 F0-FF linux/sockios.h SIOCDEVPRIVATE range 0x8B all linux/wireless.h 0x8C 00-3F WiNRADiO driver diff --git a/Documentation/userspace-api/landlock.rst b/Documentation/userspace-api/landlock.rst index b8ea59493964..cec780c2f497 100644 --- a/Documentation/userspace-api/landlock.rst +++ b/Documentation/userspace-api/landlock.rst @@ -8,7 +8,7 @@ Landlock: unprivileged access control ===================================== :Author: Mickaël Salaün -:Date: May 2022 +:Date: September 2022 The goal of Landlock is to enable to restrict ambient rights (e.g. global filesystem access) for a set of processes. Because Landlock is a stackable @@ -69,7 +69,7 @@ should try to protect users as much as possible whatever the kernel they are using. To avoid binary enforcement (i.e. either all security features or none), we can leverage a dedicated Landlock command to get the current version of the Landlock ABI and adapt the handled accesses. Let's check if we should -remove the `LANDLOCK_ACCESS_FS_REFER` access right which is only supported +remove the ``LANDLOCK_ACCESS_FS_REFER`` access right which is only supported starting with the second version of the ABI. .. code-block:: c @@ -128,7 +128,7 @@ descriptor. It may also be required to create rules following the same logic as explained for the ruleset creation, by filtering access rights according to the Landlock ABI version. In this example, this is not required because -`LANDLOCK_ACCESS_FS_REFER` is not allowed by any rule. +``LANDLOCK_ACCESS_FS_REFER`` is not allowed by any rule. We now have a ruleset with one rule allowing read access to ``/usr`` while denying all other handled accesses for the filesystem. The next step is to @@ -154,8 +154,8 @@ The current thread is now ready to sandbox itself with the ruleset. } close(ruleset_fd); -If the `landlock_restrict_self` system call succeeds, the current thread is now -restricted and this policy will be enforced on all its subsequently created +If the ``landlock_restrict_self`` system call succeeds, the current thread is +now restricted and this policy will be enforced on all its subsequently created children as well. Once a thread is landlocked, there is no way to remove its security policy; only adding more restrictions is allowed. These threads are now in a new Landlock domain, merge of their parent one (if any) with the new @@ -170,12 +170,13 @@ It is recommended setting access rights to file hierarchy leaves as much as possible. For instance, it is better to be able to have ``~/doc/`` as a read-only hierarchy and ``~/tmp/`` as a read-write hierarchy, compared to ``~/`` as a read-only hierarchy and ``~/tmp/`` as a read-write hierarchy. -Following this good practice leads to self-sufficient hierarchies that don't +Following this good practice leads to self-sufficient hierarchies that do not depend on their location (i.e. parent directories). This is particularly relevant when we want to allow linking or renaming. Indeed, having consistent access rights per directory enables to change the location of such directory without relying on the destination directory access rights (except those that -are required for this operation, see `LANDLOCK_ACCESS_FS_REFER` documentation). +are required for this operation, see ``LANDLOCK_ACCESS_FS_REFER`` +documentation). Having self-sufficient hierarchies also helps to tighten the required access rights to the minimal set of data. This also helps avoid sinkhole directories, i.e. directories where data can be linked to but not linked from. However, @@ -259,7 +260,7 @@ Backward and forward compatibility Landlock is designed to be compatible with past and future versions of the kernel. This is achieved thanks to the system call attributes and the -associated bitflags, particularly the ruleset's `handled_access_fs`. Making +associated bitflags, particularly the ruleset's ``handled_access_fs``. Making handled access right explicit enables the kernel and user space to have a clear contract with each other. This is required to make sure sandboxing will not get stricter with a system update, which could break applications. @@ -380,8 +381,8 @@ by the Documentation/admin-guide/cgroup-v1/memory.rst. Previous limitations ==================== -File renaming and linking (ABI 1) ---------------------------------- +File renaming and linking (ABI < 2) +----------------------------------- Because Landlock targets unprivileged access controls, it needs to properly handle composition of rules. Such property also implies rules nesting. @@ -394,7 +395,7 @@ according to the potentially lost constraints. To protect against privilege escalations through renaming or linking, and for the sake of simplicity, Landlock previously limited linking and renaming to the same directory. Starting with the Landlock ABI version 2, it is now possible to securely -control renaming and linking thanks to the new `LANDLOCK_ACCESS_FS_REFER` +control renaming and linking thanks to the new ``LANDLOCK_ACCESS_FS_REFER`` access right. .. _kernel_support: @@ -403,14 +404,14 @@ Kernel support ============== Landlock was first introduced in Linux 5.13 but it must be configured at build -time with `CONFIG_SECURITY_LANDLOCK=y`. Landlock must also be enabled at boot +time with ``CONFIG_SECURITY_LANDLOCK=y``. Landlock must also be enabled at boot time as the other security modules. The list of security modules enabled by -default is set with `CONFIG_LSM`. The kernel configuration should then -contains `CONFIG_LSM=landlock,[...]` with `[...]` as the list of other +default is set with ``CONFIG_LSM``. The kernel configuration should then +contains ``CONFIG_LSM=landlock,[...]`` with ``[...]`` as the list of other potentially useful security modules for the running system (see the -`CONFIG_LSM` help). +``CONFIG_LSM`` help). -If the running kernel doesn't have `landlock` in `CONFIG_LSM`, then we can +If the running kernel does not have ``landlock`` in ``CONFIG_LSM``, then we can still enable it by adding ``lsm=landlock,[...]`` to Documentation/admin-guide/kernel-parameters.rst thanks to the bootloader configuration. diff --git a/Documentation/userspace-api/netlink/index.rst b/Documentation/userspace-api/netlink/index.rst new file mode 100644 index 000000000000..b0c21538d97d --- /dev/null +++ b/Documentation/userspace-api/netlink/index.rst @@ -0,0 +1,12 @@ +.. SPDX-License-Identifier: BSD-3-Clause + +================ +Netlink Handbook +================ + +Netlink documentation for users. + +.. toctree:: + :maxdepth: 2 + + intro diff --git a/Documentation/userspace-api/netlink/intro.rst b/Documentation/userspace-api/netlink/intro.rst new file mode 100644 index 000000000000..0955e9f203d3 --- /dev/null +++ b/Documentation/userspace-api/netlink/intro.rst @@ -0,0 +1,681 @@ +.. SPDX-License-Identifier: BSD-3-Clause + +======================= +Introduction to Netlink +======================= + +Netlink is often described as an ioctl() replacement. +It aims to replace fixed-format C structures as supplied +to ioctl() with a format which allows an easy way to add +or extended the arguments. + +To achieve this Netlink uses a minimal fixed-format metadata header +followed by multiple attributes in the TLV (type, length, value) format. + +Unfortunately the protocol has evolved over the years, in an organic +and undocumented fashion, making it hard to coherently explain. +To make the most practical sense this document starts by describing +netlink as it is used today and dives into more "historical" uses +in later sections. + +Opening a socket +================ + +Netlink communication happens over sockets, a socket needs to be +opened first: + +.. code-block:: c + + fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_GENERIC); + +The use of sockets allows for a natural way of exchanging information +in both directions (to and from the kernel). The operations are still +performed synchronously when applications send() the request but +a separate recv() system call is needed to read the reply. + +A very simplified flow of a Netlink "call" will therefore look +something like: + +.. code-block:: c + + fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_GENERIC); + + /* format the request */ + send(fd, &request, sizeof(request)); + n = recv(fd, &response, RSP_BUFFER_SIZE); + /* interpret the response */ + +Netlink also provides natural support for "dumping", i.e. communicating +to user space all objects of a certain type (e.g. dumping all network +interfaces). + +.. code-block:: c + + fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_GENERIC); + + /* format the dump request */ + send(fd, &request, sizeof(request)); + while (1) { + n = recv(fd, &buffer, RSP_BUFFER_SIZE); + /* one recv() call can read multiple messages, hence the loop below */ + for (nl_msg in buffer) { + if (nl_msg.nlmsg_type == NLMSG_DONE) + goto dump_finished; + /* process the object */ + } + } + dump_finished: + +The first two arguments of the socket() call require little explanation - +it is opening a Netlink socket, with all headers provided by the user +(hence NETLINK, RAW). The last argument is the protocol within Netlink. +This field used to identify the subsystem with which the socket will +communicate. + +Classic vs Generic Netlink +-------------------------- + +Initial implementation of Netlink depended on a static allocation +of IDs to subsystems and provided little supporting infrastructure. +Let us refer to those protocols collectively as **Classic Netlink**. +The list of them is defined on top of the ``include/uapi/linux/netlink.h`` +file, they include among others - general networking (NETLINK_ROUTE), +iSCSI (NETLINK_ISCSI), and audit (NETLINK_AUDIT). + +**Generic Netlink** (introduced in 2005) allows for dynamic registration of +subsystems (and subsystem ID allocation), introspection and simplifies +implementing the kernel side of the interface. + +The following section describes how to use Generic Netlink, as the +number of subsystems using Generic Netlink outnumbers the older +protocols by an order of magnitude. There are also no plans for adding +more Classic Netlink protocols to the kernel. +Basic information on how communicating with core networking parts of +the Linux kernel (or another of the 20 subsystems using Classic +Netlink) differs from Generic Netlink is provided later in this document. + +Generic Netlink +=============== + +In addition to the Netlink fixed metadata header each Netlink protocol +defines its own fixed metadata header. (Similarly to how network +headers stack - Ethernet > IP > TCP we have Netlink > Generic N. > Family.) + +A Netlink message always starts with struct nlmsghdr, which is followed +by a protocol-specific header. In case of Generic Netlink the protocol +header is struct genlmsghdr. + +The practical meaning of the fields in case of Generic Netlink is as follows: + +.. code-block:: c + + struct nlmsghdr { + __u32 nlmsg_len; /* Length of message including headers */ + __u16 nlmsg_type; /* Generic Netlink Family (subsystem) ID */ + __u16 nlmsg_flags; /* Flags - request or dump */ + __u32 nlmsg_seq; /* Sequence number */ + __u32 nlmsg_pid; /* Port ID, set to 0 */ + }; + struct genlmsghdr { + __u8 cmd; /* Command, as defined by the Family */ + __u8 version; /* Irrelevant, set to 1 */ + __u16 reserved; /* Reserved, set to 0 */ + }; + /* TLV attributes follow... */ + +In Classic Netlink :c:member:`nlmsghdr.nlmsg_type` used to identify +which operation within the subsystem the message was referring to +(e.g. get information about a netdev). Generic Netlink needs to mux +multiple subsystems in a single protocol so it uses this field to +identify the subsystem, and :c:member:`genlmsghdr.cmd` identifies +the operation instead. (See :ref:`res_fam` for +information on how to find the Family ID of the subsystem of interest.) +Note that the first 16 values (0 - 15) of this field are reserved for +control messages both in Classic Netlink and Generic Netlink. +See :ref:`nl_msg_type` for more details. + +There are 3 usual types of message exchanges on a Netlink socket: + + - performing a single action (``do``); + - dumping information (``dump``); + - getting asynchronous notifications (``multicast``). + +Classic Netlink is very flexible and presumably allows other types +of exchanges to happen, but in practice those are the three that get +used. + +Asynchronous notifications are sent by the kernel and received by +the user sockets which subscribed to them. ``do`` and ``dump`` requests +are initiated by the user. :c:member:`nlmsghdr.nlmsg_flags` should +be set as follows: + + - for ``do``: ``NLM_F_REQUEST | NLM_F_ACK`` + - for ``dump``: ``NLM_F_REQUEST | NLM_F_ACK | NLM_F_DUMP`` + +:c:member:`nlmsghdr.nlmsg_seq` should be a set to a monotonically +increasing value. The value gets echoed back in responses and doesn't +matter in practice, but setting it to an increasing value for each +message sent is considered good hygiene. The purpose of the field is +matching responses to requests. Asynchronous notifications will have +:c:member:`nlmsghdr.nlmsg_seq` of ``0``. + +:c:member:`nlmsghdr.nlmsg_pid` is the Netlink equivalent of an address. +This field can be set to ``0`` when talking to the kernel. +See :ref:`nlmsg_pid` for the (uncommon) uses of the field. + +The expected use for :c:member:`genlmsghdr.version` was to allow +versioning of the APIs provided by the subsystems. No subsystem to +date made significant use of this field, so setting it to ``1`` seems +like a safe bet. + +.. _nl_msg_type: + +Netlink message types +--------------------- + +As previously mentioned :c:member:`nlmsghdr.nlmsg_type` carries +protocol specific values but the first 16 identifiers are reserved +(first subsystem specific message type should be equal to +``NLMSG_MIN_TYPE`` which is ``0x10``). + +There are only 4 Netlink control messages defined: + + - ``NLMSG_NOOP`` - ignore the message, not used in practice; + - ``NLMSG_ERROR`` - carries the return code of an operation; + - ``NLMSG_DONE`` - marks the end of a dump; + - ``NLMSG_OVERRUN`` - socket buffer has overflown, not used to date. + +``NLMSG_ERROR`` and ``NLMSG_DONE`` are of practical importance. +They carry return codes for operations. Note that unless +the ``NLM_F_ACK`` flag is set on the request Netlink will not respond +with ``NLMSG_ERROR`` if there is no error. To avoid having to special-case +this quirk it is recommended to always set ``NLM_F_ACK``. + +The format of ``NLMSG_ERROR`` is described by struct nlmsgerr:: + + ---------------------------------------------- + | struct nlmsghdr - response header | + ---------------------------------------------- + | int error | + ---------------------------------------------- + | struct nlmsghdr - original request header | + ---------------------------------------------- + | ** optionally (1) payload of the request | + ---------------------------------------------- + | ** optionally (2) extended ACK | + ---------------------------------------------- + +There are two instances of struct nlmsghdr here, first of the response +and second of the request. ``NLMSG_ERROR`` carries the information about +the request which led to the error. This could be useful when trying +to match requests to responses or re-parse the request to dump it into +logs. + +The payload of the request is not echoed in messages reporting success +(``error == 0``) or if ``NETLINK_CAP_ACK`` setsockopt() was set. +The latter is common +and perhaps recommended as having to read a copy of every request back +from the kernel is rather wasteful. The absence of request payload +is indicated by ``NLM_F_CAPPED`` in :c:member:`nlmsghdr.nlmsg_flags`. + +The second optional element of ``NLMSG_ERROR`` are the extended ACK +attributes. See :ref:`ext_ack` for more details. The presence +of extended ACK is indicated by ``NLM_F_ACK_TLVS`` in +:c:member:`nlmsghdr.nlmsg_flags`. + +``NLMSG_DONE`` is simpler, the request is never echoed but the extended +ACK attributes may be present:: + + ---------------------------------------------- + | struct nlmsghdr - response header | + ---------------------------------------------- + | int error | + ---------------------------------------------- + | ** optionally extended ACK | + ---------------------------------------------- + +.. _res_fam: + +Resolving the Family ID +----------------------- + +This section explains how to find the Family ID of a subsystem. +It also serves as an example of Generic Netlink communication. + +Generic Netlink is itself a subsystem exposed via the Generic Netlink API. +To avoid a circular dependency Generic Netlink has a statically allocated +Family ID (``GENL_ID_CTRL`` which is equal to ``NLMSG_MIN_TYPE``). +The Generic Netlink family implements a command used to find out information +about other families (``CTRL_CMD_GETFAMILY``). + +To get information about the Generic Netlink family named for example +``"test1"`` we need to send a message on the previously opened Generic Netlink +socket. The message should target the Generic Netlink Family (1), be a +``do`` (2) call to ``CTRL_CMD_GETFAMILY`` (3). A ``dump`` version of this +call would make the kernel respond with information about *all* the families +it knows about. Last but not least the name of the family in question has +to be specified (4) as an attribute with the appropriate type:: + + struct nlmsghdr: + __u32 nlmsg_len: 32 + __u16 nlmsg_type: GENL_ID_CTRL // (1) + __u16 nlmsg_flags: NLM_F_REQUEST | NLM_F_ACK // (2) + __u32 nlmsg_seq: 1 + __u32 nlmsg_pid: 0 + + struct genlmsghdr: + __u8 cmd: CTRL_CMD_GETFAMILY // (3) + __u8 version: 2 /* or 1, doesn't matter */ + __u16 reserved: 0 + + struct nlattr: // (4) + __u16 nla_len: 10 + __u16 nla_type: CTRL_ATTR_FAMILY_NAME + char data: test1\0 + + (padding:) + char data: \0\0 + +The length fields in Netlink (:c:member:`nlmsghdr.nlmsg_len` +and :c:member:`nlattr.nla_len`) always *include* the header. +Attribute headers in netlink must be aligned to 4 bytes from the start +of the message, hence the extra ``\0\0`` after ``CTRL_ATTR_FAMILY_NAME``. +The attribute lengths *exclude* the padding. + +If the family is found kernel will reply with two messages, the response +with all the information about the family:: + + /* Message #1 - reply */ + struct nlmsghdr: + __u32 nlmsg_len: 136 + __u16 nlmsg_type: GENL_ID_CTRL + __u16 nlmsg_flags: 0 + __u32 nlmsg_seq: 1 /* echoed from our request */ + __u32 nlmsg_pid: 5831 /* The PID of our user space process */ + + struct genlmsghdr: + __u8 cmd: CTRL_CMD_GETFAMILY + __u8 version: 2 + __u16 reserved: 0 + + struct nlattr: + __u16 nla_len: 10 + __u16 nla_type: CTRL_ATTR_FAMILY_NAME + char data: test1\0 + + (padding:) + data: \0\0 + + struct nlattr: + __u16 nla_len: 6 + __u16 nla_type: CTRL_ATTR_FAMILY_ID + __u16: 123 /* The Family ID we are after */ + + (padding:) + char data: \0\0 + + struct nlattr: + __u16 nla_len: 9 + __u16 nla_type: CTRL_ATTR_FAMILY_VERSION + __u16: 1 + + /* ... etc, more attributes will follow. */ + +And the error code (success) since ``NLM_F_ACK`` had been set on the request:: + + /* Message #2 - the ACK */ + struct nlmsghdr: + __u32 nlmsg_len: 36 + __u16 nlmsg_type: NLMSG_ERROR + __u16 nlmsg_flags: NLM_F_CAPPED /* There won't be a payload */ + __u32 nlmsg_seq: 1 /* echoed from our request */ + __u32 nlmsg_pid: 5831 /* The PID of our user space process */ + + int error: 0 + + struct nlmsghdr: /* Copy of the request header as we sent it */ + __u32 nlmsg_len: 32 + __u16 nlmsg_type: GENL_ID_CTRL + __u16 nlmsg_flags: NLM_F_REQUEST | NLM_F_ACK + __u32 nlmsg_seq: 1 + __u32 nlmsg_pid: 0 + +The order of attributes (struct nlattr) is not guaranteed so the user +has to walk the attributes and parse them. + +Note that Generic Netlink sockets are not associated or bound to a single +family. A socket can be used to exchange messages with many different +families, selecting the recipient family on message-by-message basis using +the :c:member:`nlmsghdr.nlmsg_type` field. + +.. _ext_ack: + +Extended ACK +------------ + +Extended ACK controls reporting of additional error/warning TLVs +in ``NLMSG_ERROR`` and ``NLMSG_DONE`` messages. To maintain backward +compatibility this feature has to be explicitly enabled by setting +the ``NETLINK_EXT_ACK`` setsockopt() to ``1``. + +Types of extended ack attributes are defined in enum nlmsgerr_attrs. +The most commonly used attributes are ``NLMSGERR_ATTR_MSG``, +``NLMSGERR_ATTR_OFFS`` and ``NLMSGERR_ATTR_MISS_*``. + +``NLMSGERR_ATTR_MSG`` carries a message in English describing +the encountered problem. These messages are far more detailed +than what can be expressed thru standard UNIX error codes. + +``NLMSGERR_ATTR_OFFS`` points to the attribute which caused the problem. + +``NLMSGERR_ATTR_MISS_TYPE`` and ``NLMSGERR_ATTR_MISS_NEST`` +inform about a missing attribute. + +Extended ACKs can be reported on errors as well as in case of success. +The latter should be treated as a warning. + +Extended ACKs greatly improve the usability of Netlink and should +always be enabled, appropriately parsed and reported to the user. + +Advanced topics +=============== + +Dump consistency +---------------- + +Some of the data structures kernel uses for storing objects make +it hard to provide an atomic snapshot of all the objects in a dump +(without impacting the fast-paths updating them). + +Kernel may set the ``NLM_F_DUMP_INTR`` flag on any message in a dump +(including the ``NLMSG_DONE`` message) if the dump was interrupted and +may be inconsistent (e.g. missing objects). User space should retry +the dump if it sees the flag set. + +Introspection +------------- + +The basic introspection abilities are enabled by access to the Family +object as reported in :ref:`res_fam`. User can query information about +the Generic Netlink family, including which operations are supported +by the kernel and what attributes the kernel understands. +Family information includes the highest ID of an attribute kernel can parse, +a separate command (``CTRL_CMD_GETPOLICY``) provides detailed information +about supported attributes, including ranges of values the kernel accepts. + +Querying family information is useful in cases when user space needs +to make sure that the kernel has support for a feature before issuing +a request. + +.. _nlmsg_pid: + +nlmsg_pid +--------- + +:c:member:`nlmsghdr.nlmsg_pid` is the Netlink equivalent of an address. +It is referred to as Port ID, sometimes Process ID because for historical +reasons if the application does not select (bind() to) an explicit Port ID +kernel will automatically assign it the ID equal to its Process ID +(as reported by the getpid() system call). + +Similarly to the bind() semantics of the TCP/IP network protocols the value +of zero means "assign automatically", hence it is common for applications +to leave the :c:member:`nlmsghdr.nlmsg_pid` field initialized to ``0``. + +The field is still used today in rare cases when kernel needs to send +a unicast notification. User space application can use bind() to associate +its socket with a specific PID, it then communicates its PID to the kernel. +This way the kernel can reach the specific user space process. + +This sort of communication is utilized in UMH (User Mode Helper)-like +scenarios when kernel needs to trigger user space processing or ask user +space for a policy decision. + +Multicast notifications +----------------------- + +One of the strengths of Netlink is the ability to send event notifications +to user space. This is a unidirectional form of communication (kernel -> +user) and does not involve any control messages like ``NLMSG_ERROR`` or +``NLMSG_DONE``. + +For example the Generic Netlink family itself defines a set of multicast +notifications about registered families. When a new family is added the +sockets subscribed to the notifications will get the following message:: + + struct nlmsghdr: + __u32 nlmsg_len: 136 + __u16 nlmsg_type: GENL_ID_CTRL + __u16 nlmsg_flags: 0 + __u32 nlmsg_seq: 0 + __u32 nlmsg_pid: 0 + + struct genlmsghdr: + __u8 cmd: CTRL_CMD_NEWFAMILY + __u8 version: 2 + __u16 reserved: 0 + + struct nlattr: + __u16 nla_len: 10 + __u16 nla_type: CTRL_ATTR_FAMILY_NAME + char data: test1\0 + + (padding:) + data: \0\0 + + struct nlattr: + __u16 nla_len: 6 + __u16 nla_type: CTRL_ATTR_FAMILY_ID + __u16: 123 /* The Family ID we are after */ + + (padding:) + char data: \0\0 + + struct nlattr: + __u16 nla_len: 9 + __u16 nla_type: CTRL_ATTR_FAMILY_VERSION + __u16: 1 + + /* ... etc, more attributes will follow. */ + +The notification contains the same information as the response +to the ``CTRL_CMD_GETFAMILY`` request. + +The Netlink headers of the notification are mostly 0 and irrelevant. +The :c:member:`nlmsghdr.nlmsg_seq` may be either zero or a monotonically +increasing notification sequence number maintained by the family. + +To receive notifications the user socket must subscribe to the relevant +notification group. Much like the Family ID, the Group ID for a given +multicast group is dynamic and can be found inside the Family information. +The ``CTRL_ATTR_MCAST_GROUPS`` attribute contains nests with names +(``CTRL_ATTR_MCAST_GRP_NAME``) and IDs (``CTRL_ATTR_MCAST_GRP_ID``) of +the groups family. + +Once the Group ID is known a setsockopt() call adds the socket to the group: + +.. code-block:: c + + unsigned int group_id; + + /* .. find the group ID... */ + + setsockopt(fd, SOL_NETLINK, NETLINK_ADD_MEMBERSHIP, + &group_id, sizeof(group_id)); + +The socket will now receive notifications. + +It is recommended to use separate sockets for receiving notifications +and sending requests to the kernel. The asynchronous nature of notifications +means that they may get mixed in with the responses making the message +handling much harder. + +Buffer sizing +------------- + +Netlink sockets are datagram sockets rather than stream sockets, +meaning that each message must be received in its entirety by a single +recv()/recvmsg() system call. If the buffer provided by the user is too +short, the message will be truncated and the ``MSG_TRUNC`` flag set +in struct msghdr (struct msghdr is the second argument +of the recvmsg() system call, *not* a Netlink header). + +Upon truncation the remaining part of the message is discarded. + +Netlink expects that the user buffer will be at least 8kB or a page +size of the CPU architecture, whichever is bigger. Particular Netlink +families may, however, require a larger buffer. 32kB buffer is recommended +for most efficient handling of dumps (larger buffer fits more dumped +objects and therefore fewer recvmsg() calls are needed). + +Classic Netlink +=============== + +The main differences between Classic and Generic Netlink are the dynamic +allocation of subsystem identifiers and availability of introspection. +In theory the protocol does not differ significantly, however, in practice +Classic Netlink experimented with concepts which were abandoned in Generic +Netlink (really, they usually only found use in a small corner of a single +subsystem). This section is meant as an explainer of a few of such concepts, +with the explicit goal of giving the Generic Netlink +users the confidence to ignore them when reading the uAPI headers. + +Most of the concepts and examples here refer to the ``NETLINK_ROUTE`` family, +which covers much of the configuration of the Linux networking stack. +Real documentation of that family, deserves a chapter (or a book) of its own. + +Families +-------- + +Netlink refers to subsystems as families. This is a remnant of using +sockets and the concept of protocol families, which are part of message +demultiplexing in ``NETLINK_ROUTE``. + +Sadly every layer of encapsulation likes to refer to whatever it's carrying +as "families" making the term very confusing: + + 1. AF_NETLINK is a bona fide socket protocol family + 2. AF_NETLINK's documentation refers to what comes after its own + header (struct nlmsghdr) in a message as a "Family Header" + 3. Generic Netlink is a family for AF_NETLINK (struct genlmsghdr follows + struct nlmsghdr), yet it also calls its users "Families". + +Note that the Generic Netlink Family IDs are in a different "ID space" +and overlap with Classic Netlink protocol numbers (e.g. ``NETLINK_CRYPTO`` +has the Classic Netlink protocol ID of 21 which Generic Netlink will +happily allocate to one of its families as well). + +Strict checking +--------------- + +The ``NETLINK_GET_STRICT_CHK`` socket option enables strict input checking +in ``NETLINK_ROUTE``. It was needed because historically kernel did not +validate the fields of structures it didn't process. This made it impossible +to start using those fields later without risking regressions in applications +which initialized them incorrectly or not at all. + +``NETLINK_GET_STRICT_CHK`` declares that the application is initializing +all fields correctly. It also opts into validating that message does not +contain trailing data and requests that kernel rejects attributes with +type higher than largest attribute type known to the kernel. + +``NETLINK_GET_STRICT_CHK`` is not used outside of ``NETLINK_ROUTE``. + +Unknown attributes +------------------ + +Historically Netlink ignored all unknown attributes. The thinking was that +it would free the application from having to probe what kernel supports. +The application could make a request to change the state and check which +parts of the request "stuck". + +This is no longer the case for new Generic Netlink families and those opting +in to strict checking. See enum netlink_validation for validation types +performed. + +Fixed metadata and structures +----------------------------- + +Classic Netlink made liberal use of fixed-format structures within +the messages. Messages would commonly have a structure with +a considerable number of fields after struct nlmsghdr. It was also +common to put structures with multiple members inside attributes, +without breaking each member into an attribute of its own. + +This has caused problems with validation and extensibility and +therefore using binary structures is actively discouraged for new +attributes. + +Request types +------------- + +``NETLINK_ROUTE`` categorized requests into 4 types ``NEW``, ``DEL``, ``GET``, +and ``SET``. Each object can handle all or some of those requests +(objects being netdevs, routes, addresses, qdiscs etc.) Request type +is defined by the 2 lowest bits of the message type, so commands for +new objects would always be allocated with a stride of 4. + +Each object would also have it's own fixed metadata shared by all request +types (e.g. struct ifinfomsg for netdev requests, struct ifaddrmsg for address +requests, struct tcmsg for qdisc requests). + +Even though other protocols and Generic Netlink commands often use +the same verbs in their message names (``GET``, ``SET``) the concept +of request types did not find wider adoption. + +Notification echo +----------------- + +``NLM_F_ECHO`` requests for notifications resulting from the request +to be queued onto the requesting socket. This is useful to discover +the impact of the request. + +Note that this feature is not universally implemented. + +Other request-type-specific flags +--------------------------------- + +Classic Netlink defined various flags for its ``GET``, ``NEW`` +and ``DEL`` requests in the upper byte of nlmsg_flags in struct nlmsghdr. +Since request types have not been generalized the request type specific +flags are rarely used (and considered deprecated for new families). + +For ``GET`` - ``NLM_F_ROOT`` and ``NLM_F_MATCH`` are combined into +``NLM_F_DUMP``, and not used separately. ``NLM_F_ATOMIC`` is never used. + +For ``DEL`` - ``NLM_F_NONREC`` is only used by nftables and ``NLM_F_BULK`` +only by FDB some operations. + +The flags for ``NEW`` are used most commonly in classic Netlink. Unfortunately, +the meaning is not crystal clear. The following description is based on the +best guess of the intention of the authors, and in practice all families +stray from it in one way or another. ``NLM_F_REPLACE`` asks to replace +an existing object, if no matching object exists the operation should fail. +``NLM_F_EXCL`` has the opposite semantics and only succeeds if object already +existed. +``NLM_F_CREATE`` asks for the object to be created if it does not +exist, it can be combined with ``NLM_F_REPLACE`` and ``NLM_F_EXCL``. + +A comment in the main Netlink uAPI header states:: + + 4.4BSD ADD NLM_F_CREATE|NLM_F_EXCL + 4.4BSD CHANGE NLM_F_REPLACE + + True CHANGE NLM_F_CREATE|NLM_F_REPLACE + Append NLM_F_CREATE + Check NLM_F_EXCL + +which seems to indicate that those flags predate request types. +``NLM_F_REPLACE`` without ``NLM_F_CREATE`` was initially used instead +of ``SET`` commands. +``NLM_F_EXCL`` without ``NLM_F_CREATE`` was used to check if object exists +without creating it, presumably predating ``GET`` commands. + +``NLM_F_APPEND`` indicates that if one key can have multiple objects associated +with it (e.g. multiple next-hop objects for a route) the new object should be +added to the list rather than replacing the entire list. + +uAPI reference +============== + +.. kernel-doc:: include/uapi/linux/netlink.h diff --git a/Documentation/virt/kvm/x86/mmu.rst b/Documentation/virt/kvm/x86/mmu.rst index 8739120f4300..8364afa228ec 100644 --- a/Documentation/virt/kvm/x86/mmu.rst +++ b/Documentation/virt/kvm/x86/mmu.rst @@ -377,7 +377,7 @@ Emulating cr0.wp ================ If tdp is not enabled, the host must keep cr0.wp=1 so page write protection -works for the guest kernel, not guest guest userspace. When the guest +works for the guest kernel, not guest userspace. When the guest cr0.wp=1, this does not present a problem. However when the guest cr0.wp=0, we cannot map the permissions for gpte.u=1, gpte.w=0 to any spte (the semantics require allowing any guest kernel access plus user read access). diff --git a/Documentation/w1/masters/ds2490.rst b/Documentation/w1/masters/ds2490.rst index 7e5b50f9c0f5..842e7ae80424 100644 --- a/Documentation/w1/masters/ds2490.rst +++ b/Documentation/w1/masters/ds2490.rst @@ -52,7 +52,7 @@ Notes and limitations. clear the entire bulk in buffer. It would be possible to read the maximum buffer size to not run into this error condition, only extra bytes in the buffer is a logic error in the driver. The code should - should match reads and writes as well as data sizes. Reads and + match reads and writes as well as data sizes. Reads and writes are serialized and the status verifies that the chip is idle (and data is available) before the read is executed, so it should not happen. diff --git a/Documentation/w1/w1-generic.rst b/Documentation/w1/w1-generic.rst index da4e8b4e9b01..99255b6d0e53 100644 --- a/Documentation/w1/w1-generic.rst +++ b/Documentation/w1/w1-generic.rst @@ -113,7 +113,7 @@ generally only make sense when searching is disabled, as a search will redetect manually removed devices that are present and timeout manually added devices that aren't on the bus. -Bus searches occur at an interval, specified as a summ of timeout and +Bus searches occur at an interval, specified as a sum of timeout and timeout_us module parameters (either of which may be 0) for as long as w1_master_search remains greater than 0 or is -1. Each search attempt decrements w1_master_search by 1 (down to 0) and increments diff --git a/Documentation/x86/entry_64.rst b/Documentation/x86/entry_64.rst index e433e08f7018..0afdce3c06f4 100644 --- a/Documentation/x86/entry_64.rst +++ b/Documentation/x86/entry_64.rst @@ -33,8 +33,8 @@ Some of these entries are: - interrupt: An array of entries. Every IDT vector that doesn't explicitly point somewhere else gets set to the corresponding value in interrupts. These point to a whole array of - magically-generated functions that make their way to do_IRQ with - the interrupt number as a parameter. + magically-generated functions that make their way to common_interrupt() + with the interrupt number as a parameter. - APIC interrupts: Various special-purpose interrupts for things like TLB shootdown. diff --git a/Documentation/x86/microcode.rst b/Documentation/x86/microcode.rst index a320d37982ed..b627c6f36bcf 100644 --- a/Documentation/x86/microcode.rst +++ b/Documentation/x86/microcode.rst @@ -6,6 +6,7 @@ The Linux Microcode Loader :Authors: - Fenghua Yu <fenghua.yu@intel.com> - Borislav Petkov <bp@suse.de> + - Ashok Raj <ashok.raj@intel.com> The kernel has a x86 microcode loading facility which is supposed to provide microcode loading methods in the OS. Potential use cases are @@ -92,15 +93,8 @@ vendor's site. Late loading ============ -There are two legacy user space interfaces to load microcode, either through -/dev/cpu/microcode or through /sys/devices/system/cpu/microcode/reload file -in sysfs. - -The /dev/cpu/microcode method is deprecated because it needs a special -userspace tool for that. - -The easier method is simply installing the microcode packages your distro -supplies and running:: +You simply install the microcode packages your distro supplies and +run:: # echo 1 > /sys/devices/system/cpu/microcode/reload @@ -110,6 +104,110 @@ The loading mechanism looks for microcode blobs in /lib/firmware/{intel-ucode,amd-ucode}. The default distro installation packages already put them there. +Since kernel 5.19, late loading is not enabled by default. + +The /dev/cpu/microcode method has been removed in 5.19. + +Why is late loading dangerous? +============================== + +Synchronizing all CPUs +---------------------- + +The microcode engine which receives the microcode update is shared +between the two logical threads in a SMT system. Therefore, when +the update is executed on one SMT thread of the core, the sibling +"automatically" gets the update. + +Since the microcode can "simulate" MSRs too, while the microcode update +is in progress, those simulated MSRs transiently cease to exist. This +can result in unpredictable results if the SMT sibling thread happens to +be in the middle of an access to such an MSR. The usual observation is +that such MSR accesses cause #GPs to be raised to signal that former are +not present. + +The disappearing MSRs are just one common issue which is being observed. +Any other instruction that's being patched and gets concurrently +executed by the other SMT sibling, can also result in similar, +unpredictable behavior. + +To eliminate this case, a stop_machine()-based CPU synchronization was +introduced as a way to guarantee that all logical CPUs will not execute +any code but just wait in a spin loop, polling an atomic variable. + +While this took care of device or external interrupts, IPIs including +LVT ones, such as CMCI etc, it cannot address other special interrupts +that can't be shut off. Those are Machine Check (#MC), System Management +(#SMI) and Non-Maskable interrupts (#NMI). + +Machine Checks +-------------- + +Machine Checks (#MC) are non-maskable. There are two kinds of MCEs. +Fatal un-recoverable MCEs and recoverable MCEs. While un-recoverable +errors are fatal, recoverable errors can also happen in kernel context +are also treated as fatal by the kernel. + +On certain Intel machines, MCEs are also broadcast to all threads in a +system. If one thread is in the middle of executing WRMSR, a MCE will be +taken at the end of the flow. Either way, they will wait for the thread +performing the wrmsr(0x79) to rendezvous in the MCE handler and shutdown +eventually if any of the threads in the system fail to check in to the +MCE rendezvous. + +To be paranoid and get predictable behavior, the OS can choose to set +MCG_STATUS.MCIP. Since MCEs can be at most one in a system, if an +MCE was signaled, the above condition will promote to a system reset +automatically. OS can turn off MCIP at the end of the update for that +core. + +System Management Interrupt +--------------------------- + +SMIs are also broadcast to all CPUs in the platform. Microcode update +requests exclusive access to the core before writing to MSR 0x79. So if +it does happen such that, one thread is in WRMSR flow, and the 2nd got +an SMI, that thread will be stopped in the first instruction in the SMI +handler. + +Since the secondary thread is stopped in the first instruction in SMI, +there is very little chance that it would be in the middle of executing +an instruction being patched. Plus OS has no way to stop SMIs from +happening. + +Non-Maskable Interrupts +----------------------- + +When thread0 of a core is doing the microcode update, if thread1 is +pulled into NMI, that can cause unpredictable behavior due to the +reasons above. + +OS can choose a variety of methods to avoid running into this situation. + + +Is the microcode suitable for late loading? +------------------------------------------- + +Late loading is done when the system is fully operational and running +real workloads. Late loading behavior depends on what the base patch on +the CPU is before upgrading to the new patch. + +This is true for Intel CPUs. + +Consider, for example, a CPU has patch level 1 and the update is to +patch level 3. + +Between patch1 and patch3, patch2 might have deprecated a software-visible +feature. + +This is unacceptable if software is even potentially using that feature. +For instance, say MSR_X is no longer available after an update, +accessing that MSR will cause a #GP fault. + +Basically there is no way to declare a new microcode update suitable +for late-loading. This is another one of the problems that caused late +loading to be not enabled by default. + Builtin microcode ================= |
