summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/rk3066a.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/rk3066a.dtsi')
-rw-r--r--arch/arm/boot/dts/rk3066a.dtsi67
1 files changed, 67 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 879a818fba51..ad9c2db59670 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -179,6 +179,27 @@
bias-disable;
};
+ emmc {
+ emmc_clk: emmc-clk {
+ rockchip,pins = <RK_GPIO3 31 RK_FUNC_2 &pcfg_pull_default>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <RK_GPIO4 9 RK_FUNC_2 &pcfg_pull_default>;
+ };
+
+ emmc_rst: emmc-rst {
+ rockchip,pins = <RK_GPIO4 10 RK_FUNC_2 &pcfg_pull_default>;
+ };
+
+ /*
+ * The data pins are shared between nandc and emmc and
+ * not accessible through pinctrl. Also they should've
+ * been already set correctly by firmware, as
+ * flash/emmc is the boot-device.
+ */
+ };
+
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>,
@@ -238,6 +259,42 @@
};
};
+ spi0 {
+ spi0_clk: spi0-clk {
+ rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_default>;
+ };
+ spi0_cs0: spi0-cs0 {
+ rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_default>;
+ };
+ spi0_tx: spi0-tx {
+ rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_default>;
+ };
+ spi0_rx: spi0-rx {
+ rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_default>;
+ };
+ spi0_cs1: spi0-cs1 {
+ rockchip,pins = <RK_GPIO4 15 RK_FUNC_1 &pcfg_pull_default>;
+ };
+ };
+
+ spi1 {
+ spi1_clk: spi1-clk {
+ rockchip,pins = <RK_GPIO2 19 RK_FUNC_2 &pcfg_pull_default>;
+ };
+ spi1_cs0: spi1-cs0 {
+ rockchip,pins = <RK_GPIO2 20 RK_FUNC_2 &pcfg_pull_default>;
+ };
+ spi1_rx: spi1-rx {
+ rockchip,pins = <RK_GPIO2 22 RK_FUNC_2 &pcfg_pull_default>;
+ };
+ spi1_tx: spi1-tx {
+ rockchip,pins = <RK_GPIO2 21 RK_FUNC_2 &pcfg_pull_default>;
+ };
+ spi1_cs1: spi1-cs1 {
+ rockchip,pins = <RK_GPIO2 23 RK_FUNC_2 &pcfg_pull_default>;
+ };
+ };
+
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
@@ -406,6 +463,16 @@
pinctrl-0 = <&pwm3_out>;
};
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>;