summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap1/board-ams-delta.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap1/board-ams-delta.c')
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c503
1 files changed, 405 insertions, 98 deletions
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 52e8e53ca154..3d191fd52910 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -12,6 +12,7 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -40,10 +41,10 @@
#include <mach/mux.h>
#include <mach/hardware.h>
-#include <mach/ams-delta-fiq.h>
#include "camera.h"
#include <mach/usb.h>
+#include "ams-delta-fiq.h"
#include "iomap.h"
#include "common.h"
@@ -178,7 +179,10 @@ static struct resource latch1_resources[] = {
},
};
+#define LATCH1_LABEL "latch1"
+
static struct bgpio_pdata latch1_pdata = {
+ .label = LATCH1_LABEL,
.base = LATCH1_GPIO_BASE,
.ngpio = LATCH1_NGPIO,
};
@@ -193,6 +197,15 @@ static struct platform_device latch1_gpio_device = {
},
};
+#define LATCH1_PIN_LED_CAMERA 0
+#define LATCH1_PIN_LED_ADVERT 1
+#define LATCH1_PIN_LED_MAIL 2
+#define LATCH1_PIN_LED_HANDSFREE 3
+#define LATCH1_PIN_LED_VOICEMAIL 4
+#define LATCH1_PIN_LED_VOICE 5
+#define LATCH1_PIN_DOCKIT1 6
+#define LATCH1_PIN_DOCKIT2 7
+
static struct resource latch2_resources[] = {
[0] = {
.name = "dat",
@@ -202,7 +215,10 @@ static struct resource latch2_resources[] = {
},
};
+#define LATCH2_LABEL "latch2"
+
static struct bgpio_pdata latch2_pdata = {
+ .label = LATCH2_LABEL,
.base = AMS_DELTA_LATCH2_GPIO_BASE,
.ngpio = AMS_DELTA_LATCH2_NGPIO,
};
@@ -217,43 +233,22 @@ static struct platform_device latch2_gpio_device = {
},
};
-static const struct gpio latch_gpios[] __initconst = {
- {
- .gpio = LATCH1_GPIO_BASE + 6,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "dockit1",
- },
- {
- .gpio = LATCH1_GPIO_BASE + 7,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "dockit2",
- },
- {
- .gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "scard_rstin",
- },
- {
- .gpio = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "scard_cmdvcc",
- },
- {
- .gpio = AMS_DELTA_GPIO_PIN_MODEM_CODEC,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "modem_codec",
- },
- {
- .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 14,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "hookflash1",
- },
- {
- .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 15,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "hookflash2",
- },
-};
+#define LATCH2_PIN_LCD_VBLEN 0
+#define LATCH2_PIN_LCD_NDISP 1
+#define LATCH2_PIN_NAND_NCE 2
+#define LATCH2_PIN_NAND_NRE 3
+#define LATCH2_PIN_NAND_NWP 4
+#define LATCH2_PIN_NAND_NWE 5
+#define LATCH2_PIN_NAND_ALE 6
+#define LATCH2_PIN_NAND_CLE 7
+#define LATCH2_PIN_KEYBRD_PWR 8
+#define LATCH2_PIN_KEYBRD_DATAOUT 9
+#define LATCH2_PIN_SCARD_RSTIN 10
+#define LATCH2_PIN_SCARD_CMDVCC 11
+#define LATCH2_PIN_MODEM_NRESET 12
+#define LATCH2_PIN_MODEM_CODEC 13
+#define LATCH2_PIN_HOOKFLASH1 14
+#define LATCH2_PIN_HOOKFLASH2 15
static struct regulator_consumer_supply modem_nreset_consumers[] = {
REGULATOR_SUPPLY("RESET#", "serial8250.1"),
@@ -272,7 +267,6 @@ static struct regulator_init_data modem_nreset_data = {
static struct fixed_voltage_config modem_nreset_config = {
.supply_name = "modem_nreset",
.microvolts = 3300000,
- .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET,
.startup_delay = 25000,
.enable_high = 1,
.enabled_at_boot = 1,
@@ -287,26 +281,21 @@ static struct platform_device modem_nreset_device = {
},
};
+static struct gpiod_lookup_table ams_delta_nreset_gpiod_table = {
+ .dev_id = "reg-fixed-voltage",
+ .table = {
+ GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_MODEM_NRESET,
+ NULL, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
struct modem_private_data {
struct regulator *regulator;
};
static struct modem_private_data modem_priv;
-void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value)
-{
- int bit = 0;
- u16 bitpos = 1 << bit;
-
- for (; bit < ngpio; bit++, bitpos = bitpos << 1) {
- if (!(mask & bitpos))
- continue;
- else
- gpio_set_value(base + bit, (value & bitpos) != 0);
- }
-}
-EXPORT_SYMBOL(ams_delta_latch_write);
-
static struct resource ams_delta_nand_resources[] = {
[0] = {
.start = OMAP1_MPUIO_BASE,
@@ -323,6 +312,22 @@ static struct platform_device ams_delta_nand_device = {
.resource = ams_delta_nand_resources,
};
+#define OMAP_GPIO_LABEL "gpio-0-15"
+
+static struct gpiod_lookup_table ams_delta_nand_gpio_table = {
+ .table = {
+ GPIO_LOOKUP(OMAP_GPIO_LABEL, AMS_DELTA_GPIO_PIN_NAND_RB, "rdy",
+ 0),
+ GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NCE, "nce", 0),
+ GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NRE, "nre", 0),
+ GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NWP, "nwp", 0),
+ GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NWE, "nwe", 0),
+ GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_ALE, "ale", 0),
+ GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_CLE, "cle", 0),
+ { },
+ },
+};
+
static struct resource ams_delta_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
@@ -358,38 +363,51 @@ static struct platform_device ams_delta_lcd_device = {
.id = -1,
};
-static const struct gpio_led gpio_leds[] __initconst = {
- {
+static struct gpiod_lookup_table ams_delta_lcd_gpio_table = {
+ .table = {
+ GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_LCD_VBLEN, "vblen", 0),
+ GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_LCD_NDISP, "ndisp", 0),
+ { },
+ },
+};
+
+/*
+ * Dynamically allocated GPIO numbers must be obtained fromm GPIO device
+ * before they can be put in the gpio_led table. Before that happens,
+ * initialize the table with invalid GPIO numbers, not 0.
+ */
+static struct gpio_led gpio_leds[] __initdata = {
+ [LATCH1_PIN_LED_CAMERA] = {
.name = "camera",
- .gpio = LATCH1_GPIO_BASE + 0,
+ .gpio = -EINVAL,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
#ifdef CONFIG_LEDS_TRIGGERS
.default_trigger = "ams_delta_camera",
#endif
},
- {
+ [LATCH1_PIN_LED_ADVERT] = {
.name = "advert",
- .gpio = LATCH1_GPIO_BASE + 1,
+ .gpio = -EINVAL,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
- {
+ [LATCH1_PIN_LED_MAIL] = {
.name = "email",
- .gpio = LATCH1_GPIO_BASE + 2,
+ .gpio = -EINVAL,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
- {
+ [LATCH1_PIN_LED_HANDSFREE] = {
.name = "handsfree",
- .gpio = LATCH1_GPIO_BASE + 3,
+ .gpio = -EINVAL,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
- {
+ [LATCH1_PIN_LED_VOICEMAIL] = {
.name = "voicemail",
- .gpio = LATCH1_GPIO_BASE + 4,
+ .gpio = -EINVAL,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
- {
+ [LATCH1_PIN_LED_VOICE] = {
.name = "voice",
- .gpio = LATCH1_GPIO_BASE + 5,
+ .gpio = -EINVAL,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
};
@@ -449,25 +467,214 @@ static struct platform_device ams_delta_audio_device = {
.id = -1,
};
+static struct gpiod_lookup_table ams_delta_audio_gpio_table = {
+ .table = {
+ GPIO_LOOKUP(OMAP_GPIO_LABEL, AMS_DELTA_GPIO_PIN_HOOK_SWITCH,
+ "hook_switch", 0),
+ GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_MODEM_CODEC,
+ "modem_codec", 0),
+ { },
+ },
+};
+
static struct platform_device cx20442_codec_device = {
.name = "cx20442-codec",
.id = -1,
};
+static struct resource ams_delta_serio_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ /*
+ * Initialize IRQ resource with invalid IRQ number.
+ * It will be replaced with dynamically allocated GPIO IRQ
+ * obtained from GPIO chip as soon as the chip is available.
+ */
+ .start = -EINVAL,
+ .end = -EINVAL,
+ },
+};
+
+static struct platform_device ams_delta_serio_device = {
+ .name = "ams-delta-serio",
+ .id = PLATFORM_DEVID_NONE,
+ .dev = {
+ /*
+ * Initialize .platform_data explicitly with NULL to
+ * indicate it is going to be used. It will be replaced
+ * with FIQ buffer address as soon as FIQ is initialized.
+ */
+ .platform_data = NULL,
+ },
+ .num_resources = ARRAY_SIZE(ams_delta_serio_resources),
+ .resource = ams_delta_serio_resources,
+};
+
+static struct regulator_consumer_supply keybrd_pwr_consumers[] = {
+ /*
+ * Initialize supply .dev_name with NULL. It will be replaced
+ * with serio dev_name() as soon as the serio device is registered.
+ */
+ REGULATOR_SUPPLY("vcc", NULL),
+};
+
+static struct regulator_init_data keybrd_pwr_initdata = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(keybrd_pwr_consumers),
+ .consumer_supplies = keybrd_pwr_consumers,
+};
+
+static struct fixed_voltage_config keybrd_pwr_config = {
+ .supply_name = "keybrd_pwr",
+ .microvolts = 5000000,
+ .enable_high = 1,
+ .init_data = &keybrd_pwr_initdata,
+};
+
+static struct platform_device keybrd_pwr_device = {
+ .name = "reg-fixed-voltage",
+ .id = PLATFORM_DEVID_AUTO,
+ .dev = {
+ .platform_data = &keybrd_pwr_config,
+ },
+};
+
+static struct gpiod_lookup_table keybrd_pwr_gpio_table = {
+ .table = {
+ GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_KEYBRD_PWR, NULL,
+ GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static struct platform_device *ams_delta_devices[] __initdata = {
&latch1_gpio_device,
&latch2_gpio_device,
&ams_delta_kp_device,
&ams_delta_camera_device,
&ams_delta_audio_device,
-};
-
-static struct platform_device *late_devices[] __initdata = {
+ &ams_delta_serio_device,
&ams_delta_nand_device,
&ams_delta_lcd_device,
&cx20442_codec_device,
};
+static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = {
+ &ams_delta_nreset_gpiod_table,
+ &ams_delta_audio_gpio_table,
+ &keybrd_pwr_gpio_table,
+ &ams_delta_lcd_gpio_table,
+ &ams_delta_nand_gpio_table,
+};
+
+/*
+ * Some drivers may not use GPIO lookup tables but need to be provided
+ * with GPIO numbers. The same applies to GPIO based IRQ lines - some
+ * drivers may even not use GPIO layer but expect just IRQ numbers.
+ * We could either define GPIO lookup tables then use them on behalf
+ * of those devices, or we can use GPIO driver level methods for
+ * identification of GPIO and IRQ numbers. For the purpose of the latter,
+ * defina a helper function which identifies GPIO chips by their labels.
+ */
+static int gpiochip_match_by_label(struct gpio_chip *chip, void *data)
+{
+ char *label = data;
+
+ return !strcmp(label, chip->label);
+}
+
+static struct gpiod_hog ams_delta_gpio_hogs[] = {
+ GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, "keybrd_dataout",
+ GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW),
+ {},
+};
+
+static struct plat_serial8250_port ams_delta_modem_ports[];
+
+/*
+ * Obtain MODEM IRQ GPIO descriptor using its hardware pin
+ * number and assign related IRQ number to the MODEM port.
+ * Keep the GPIO descriptor open so nobody steps in.
+ */
+static void __init modem_assign_irq(struct gpio_chip *chip)
+{
+ struct gpio_desc *gpiod;
+
+ gpiod = gpiochip_request_own_desc(chip, AMS_DELTA_GPIO_PIN_MODEM_IRQ,
+ "modem_irq");
+ if (IS_ERR(gpiod)) {
+ pr_err("%s: modem IRQ GPIO request failed (%ld)\n", __func__,
+ PTR_ERR(gpiod));
+ } else {
+ gpiod_direction_input(gpiod);
+ ams_delta_modem_ports[0].irq = gpiod_to_irq(gpiod);
+ }
+}
+
+/*
+ * The purpose of this function is to take care of proper initialization of
+ * devices and data structures which depend on GPIO lines provided by OMAP GPIO
+ * banks but their drivers don't use GPIO lookup tables or GPIO layer at all.
+ * The function may be called as soon as OMAP GPIO devices are probed.
+ * Since that happens at postcore_initcall, it can be called successfully
+ * from init_machine or later.
+ * Dependent devices may be registered from within this function or later.
+ */
+static void __init omap_gpio_deps_init(void)
+{
+ struct gpio_chip *chip;
+
+ chip = gpiochip_find(OMAP_GPIO_LABEL, gpiochip_match_by_label);
+ if (!chip) {
+ pr_err("%s: OMAP GPIO chip not found\n", __func__);
+ return;
+ }
+
+ /*
+ * Start with FIQ initialization as it may have to request
+ * and release successfully each OMAP GPIO pin in turn.
+ */
+ ams_delta_init_fiq(chip, &ams_delta_serio_device);
+
+ modem_assign_irq(chip);
+}
+
+/*
+ * Initialize latch2 pins with values which are safe for dependent on-board
+ * devices or useful for their successull initialization even before GPIO
+ * driver takes control over the latch pins:
+ * - LATCH2_PIN_LCD_VBLEN = 0
+ * - LATCH2_PIN_LCD_NDISP = 0 Keep LCD device powered off before its
+ * driver takes control over it.
+ * - LATCH2_PIN_NAND_NCE = 0
+ * - LATCH2_PIN_NAND_NWP = 0 Keep NAND device down and write-
+ * protected before its driver takes
+ * control over it.
+ * - LATCH2_PIN_KEYBRD_PWR = 0 Keep keyboard powered off before serio
+ * driver takes control over it.
+ * - LATCH2_PIN_KEYBRD_DATAOUT = 0 Keep low to avoid corruption of first
+ * byte of data received from attached
+ * keyboard when serio device is probed;
+ * the pin is also hogged low by the latch2
+ * GPIO driver as soon as it is ready.
+ * - LATCH2_PIN_MODEM_NRESET = 1 Enable voice MODEM device, allowing for
+ * its successful probe even before a
+ * regulator it depends on, which in turn
+ * takes control over the pin, is set up.
+ * - LATCH2_PIN_MODEM_CODEC = 1 Attach voice MODEM CODEC data port
+ * to the MODEM so the CODEC is under
+ * control even if audio driver doesn't
+ * take it over.
+ */
+static void __init ams_delta_latch2_init(void)
+{
+ u16 latch2 = 1 << LATCH2_PIN_MODEM_NRESET | 1 << LATCH2_PIN_MODEM_CODEC;
+
+ __raw_writew(latch2, LATCH2_VIRT);
+}
+
static void __init ams_delta_init(void)
{
/* mux pins for uarts */
@@ -488,6 +695,10 @@ static void __init ams_delta_init(void)
omap_cfg_reg(J19_1610_CAM_D6);
omap_cfg_reg(J18_1610_CAM_D7);
+ omap_gpio_deps_init();
+ ams_delta_latch2_init();
+ gpiod_add_hogs(ams_delta_gpio_hogs);
+
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
@@ -497,10 +708,37 @@ static void __init ams_delta_init(void)
led_trigger_register_simple("ams_delta_camera",
&ams_delta_camera_led_trigger);
#endif
- gpio_led_register_device(-1, &leds_pdata);
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
- ams_delta_init_fiq();
+ /*
+ * As soon as regulator consumers have been registered, assign their
+ * dev_names to consumer supply entries of respective regulators.
+ */
+ keybrd_pwr_consumers[0].dev_name =
+ dev_name(&ams_delta_serio_device.dev);
+
+ /*
+ * Once consumer supply entries are populated with dev_names,
+ * register regulator devices. At this stage only the keyboard
+ * power regulator has its consumer supply table fully populated.
+ */
+ platform_device_register(&keybrd_pwr_device);
+
+ /*
+ * As soon as GPIO consumers have been registered, assign
+ * their dev_names to respective GPIO lookup tables.
+ */
+ ams_delta_audio_gpio_table.dev_id =
+ dev_name(&ams_delta_audio_device.dev);
+ keybrd_pwr_gpio_table.dev_id = dev_name(&keybrd_pwr_device.dev);
+ ams_delta_nand_gpio_table.dev_id = dev_name(&ams_delta_nand_device.dev);
+ ams_delta_lcd_gpio_table.dev_id = dev_name(&ams_delta_lcd_device.dev);
+
+ /*
+ * Once GPIO lookup tables are populated with dev_names, register them.
+ */
+ gpiod_add_lookup_tables(ams_delta_gpio_tables,
+ ARRAY_SIZE(ams_delta_gpio_tables));
omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
@@ -535,7 +773,7 @@ static struct plat_serial8250_port ams_delta_modem_ports[] = {
{
.membase = IOMEM(MODEM_VIRT),
.mapbase = MODEM_PHYS,
- .irq = -EINVAL, /* changed later */
+ .irq = IRQ_NOTCONNECTED, /* changed later */
.flags = UPF_BOOT_AUTOCONF,
.irqflags = IRQF_TRIGGER_RISING,
.iotype = UPIO_MEM,
@@ -555,47 +793,118 @@ static struct platform_device ams_delta_modem_device = {
},
};
-static int __init late_init(void)
+/*
+ * leds-gpio driver doesn't make use of GPIO lookup tables,
+ * it has to be provided with GPIO numbers over platform data
+ * if GPIO descriptor info can't be obtained from device tree.
+ * We could either define GPIO lookup tables and use them on behalf
+ * of the leds-gpio device, or we can use GPIO driver level methods
+ * for identification of GPIO numbers as long as we don't support
+ * device tree. Let's do the latter.
+ */
+static void __init ams_delta_led_init(struct gpio_chip *chip)
{
- int err;
+ struct gpio_desc *gpiod;
+ int i;
+
+ for (i = LATCH1_PIN_LED_CAMERA; i < LATCH1_PIN_DOCKIT1; i++) {
+ gpiod = gpiochip_request_own_desc(chip, i, NULL);
+ if (IS_ERR(gpiod)) {
+ pr_warn("%s: %s GPIO %d request failed (%ld)\n",
+ __func__, LATCH1_LABEL, i, PTR_ERR(gpiod));
+ continue;
+ }
+
+ /* Assign GPIO numbers to LED device. */
+ gpio_leds[i].gpio = desc_to_gpio(gpiod);
+
+ gpiochip_free_own_desc(gpiod);
+ }
+
+ gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata);
+}
+
+/*
+ * The purpose of this function is to take care of assignment of GPIO numbers
+ * to platform devices which depend on GPIO lines provided by Amstrad Delta
+ * latch1 and/or latch2 GPIO devices but don't use GPIO lookup tables.
+ * The function may be called as soon as latch1/latch2 GPIO devices are
+ * initilized. Since basic-mmio-gpio driver is not registered before
+ * device_initcall, this may happen at erliest during device_initcall_sync.
+ * Dependent devices shouldn't be registered before that, their
+ * registration may be performed from within this function or later.
+ */
+static int __init ams_delta_gpio_init(void)
+{
+ struct gpio_chip *chip;
if (!machine_is_ams_delta())
return -ENODEV;
- err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios));
- if (err) {
- pr_err("Couldn't take over latch1/latch2 GPIO pins\n");
- return err;
- }
+ chip = gpiochip_find(LATCH1_LABEL, gpiochip_match_by_label);
+ if (!chip)
+ pr_err("%s: latch1 GPIO chip not found\n", __func__);
+ else
+ ams_delta_led_init(chip);
+
+ return 0;
+}
+device_initcall_sync(ams_delta_gpio_init);
- platform_add_devices(late_devices, ARRAY_SIZE(late_devices));
+static int __init modem_nreset_init(void)
+{
+ int err;
err = platform_device_register(&modem_nreset_device);
- if (err) {
+ if (err)
pr_err("Couldn't register the modem regulator device\n");
- return err;
- }
- omap_cfg_reg(M14_1510_GPIO2);
- ams_delta_modem_ports[0].irq =
- gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
+ return err;
+}
- err = gpio_request(AMS_DELTA_GPIO_PIN_MODEM_IRQ, "modem");
- if (err) {
- pr_err("Couldn't request gpio pin for modem\n");
- return err;
- }
- gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
+
+/*
+ * This function expects MODEM IRQ number already assigned to the port.
+ * The MODEM device requires its RESET# pin kept high during probe.
+ * That requirement can be fulfilled in several ways:
+ * - with a descriptor of already functional modem_nreset regulator
+ * assigned to the MODEM private data,
+ * - with the regulator not yet controlled by modem_pm function but
+ * already enabled by default on probe,
+ * - before the modem_nreset regulator is probed, with the pin already
+ * set high explicitly.
+ * The last one is already guaranteed by ams_delta_latch2_init() called
+ * from machine_init.
+ * In order to avoid taking over ttyS0 device slot, the MODEM device
+ * should be registered after OMAP serial ports. Since those ports
+ * are registered at arch_initcall, this function can be called safely
+ * at arch_initcall_sync earliest.
+ */
+static int __init ams_delta_modem_init(void)
+{
+ int err;
+
+ if (!machine_is_ams_delta())
+ return -ENODEV;
+
+ omap_cfg_reg(M14_1510_GPIO2);
/* Initialize the modem_nreset regulator consumer before use */
modem_priv.regulator = ERR_PTR(-ENODEV);
- ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC,
- AMS_DELTA_LATCH2_MODEM_CODEC);
-
err = platform_device_register(&ams_delta_modem_device);
+
+ return err;
+}
+arch_initcall_sync(ams_delta_modem_init);
+
+static int __init late_init(void)
+{
+ int err;
+
+ err = modem_nreset_init();
if (err)
- goto gpio_free;
+ return err;
/*
* Once the modem device is registered, the modem_nreset
@@ -611,8 +920,6 @@ static int __init late_init(void)
unregister:
platform_device_unregister(&ams_delta_modem_device);
-gpio_free:
- gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
return err;
}
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-22 01:57:47 +0300