diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts | 155 |
1 files changed, 32 insertions, 123 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index fecb69944cfa..1c43f3d6a0b4 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -13,7 +13,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -30,7 +32,7 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; @@ -42,7 +44,7 @@ pinctrl-0 = <&gpio_leds_default>; led-0 { - gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; linux,default-trigger = "torch"; function = LED_FUNCTION_TORCH; }; @@ -50,13 +52,13 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 69 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -66,9 +68,9 @@ touchscreen@26 { compatible = "mstar,msg2638"; reg = <0x26>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ts_int_reset_default>; vdd-supply = <&pm8916_l17>; @@ -86,7 +88,7 @@ reg = <0x0c>; vdd-supply = <&pm8916_l17>; vid-supply = <&pm8916_l6>; - reset-gpios = <&msmgpio 8 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mag_reset_default>; mount-matrix = "0", "1", "0", @@ -99,7 +101,7 @@ reg = <0x0f>; vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l6>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <31 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&accel_int_default>; @@ -111,7 +113,7 @@ proximity@48 { compatible = "sensortek,stk3310"; reg = <0x48>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <12 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&proximity_int_default>; @@ -122,7 +124,7 @@ reg = <0x68>; vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l6>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <97 IRQ_TYPE_EDGE_RISING>, <98 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; @@ -136,7 +138,7 @@ led-controller@68 { compatible = "si-en,sn3190"; reg = <0x68>; - shutdown-gpios = <&msmgpio 89 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&led_enable_default &led_shutdown_default>; #address-cells = <1>; @@ -156,26 +158,29 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &usb { @@ -195,110 +200,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { accel_int_default: accel-int-default-state { pins = "gpio31"; function = "gpio"; @@ -370,6 +272,13 @@ bias-pull-up; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + ts_int_reset_default: ts-int-reset-default-state { pins = "gpio13", "gpio100"; function = "gpio"; |