diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8996.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8996.dtsi | 57 |
1 files changed, 17 insertions, 40 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 8d41ed261adf..1601e46549e7 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -457,25 +457,6 @@ }; }; - mpm: interrupt-controller { - compatible = "qcom,mpm"; - qcom,rpm-msg-ram = <&apss_mpm>; - interrupts = <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>; - mboxes = <&apcs_glb 1>; - interrupt-controller; - #interrupt-cells = <2>; - #power-domain-cells = <0>; - interrupt-parent = <&intc>; - qcom,mpm-pin-count = <96>; - qcom,mpm-pin-map = <2 184>, /* TSENS1 upper_lower_int */ - <52 243>, /* DWC3_PRI ss_phy_irq */ - <79 347>, /* DWC3_PRI hs_phy_irq */ - <80 352>, /* DWC3_SEC hs_phy_irq */ - <81 347>, /* QUSB2_PHY_PRI DP+DM */ - <82 352>, /* QUSB2_PHY_SEC DP+DM */ - <87 326>; /* SPMI */ - }; - psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -765,15 +746,8 @@ }; rpm_msg_ram: sram@68000 { - compatible = "qcom,rpm-msg-ram", "mmio-sram"; + compatible = "qcom,rpm-msg-ram"; reg = <0x00068000 0x6000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x00068000 0x7000>; - - apss_mpm: sram@1b8 { - reg = <0x1b8 0x48>; - }; }; qfprom@74000 { @@ -782,12 +756,12 @@ #address-cells = <1>; #size-cells = <1>; - qusb2p_hstx_trim: hstx_trim@24e { + qusb2p_hstx_trim: hstx-trim@24e { reg = <0x24e 0x2>; bits = <5 4>; }; - qusb2s_hstx_trim: hstx_trim@24f { + qusb2s_hstx_trim: hstx-trim@24f { reg = <0x24f 0x1>; bits = <1 4>; }; @@ -856,8 +830,8 @@ reg = <0x004ad000 0x1000>, /* TM */ <0x004ac000 0x1000>; /* SROT */ #qcom,sensors = <8>; - interrupts-extended = <&mpm 2 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; @@ -1363,7 +1337,6 @@ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&tlmm 0 0 150>; - wakeup-parent = <&mpm>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -1891,7 +1864,7 @@ <0x0400a000 0x002100>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; - interrupts-extended = <&mpm 87 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; qcom,ee = <0>; qcom,channel = <0>; #address-cells = <2>; @@ -2104,7 +2077,7 @@ <0 0>, <0 0>, <150000000 300000000>, - <0 0>, + <75000000 150000000>, <0 0>, <0 0>, <0 0>, @@ -2123,8 +2096,8 @@ compatible = "qcom,msm8996-qmp-ufs-phy"; reg = <0x00627000 0x1000>; - clocks = <&gcc GCC_UFS_CLKREF_CLK>; - clock-names = "ref"; + clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, <&gcc GCC_UFS_CLKREF_CLK>; + clock-names = "ref", "qref"; resets = <&ufshc 0>; reset-names = "ufsphy"; @@ -3052,8 +3025,8 @@ #size-cells = <1>; ranges; - interrupts-extended = <&mpm 79 IRQ_TYPE_LEVEL_HIGH>, - <&mpm 52 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hs_phy_irq", "ss_phy_irq"; clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, @@ -3408,8 +3381,12 @@ #size-cells = <1>; ranges; - interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "qusb2_phy", + "hs_phy_irq"; clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>, <&gcc GCC_USB20_MASTER_CLK>, |