diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 67 |
1 files changed, 49 insertions, 18 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi index d08639082247..5da87baa2b23 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -375,7 +375,7 @@ }; &rpm_requests { - pm8998-regulators { + regulators-0 { compatible = "qcom,rpm-pm8998-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -410,135 +410,166 @@ regulator-min-microvolt = <1352000>; regulator-max-microvolt = <1352000>; }; + vreg_s4a_1p8: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-system-load = <100000>; regulator-allow-set-load; }; + vreg_s5a_2p04: s5 { regulator-min-microvolt = <1904000>; regulator-max-microvolt = <2032000>; }; + vreg_s7a_1p025: s7 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1028000>; }; + vreg_l1a_0p875: l1 { regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-system-load = <73400>; regulator-allow-set-load; }; + vreg_l2a_1p2: l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-system-load = <12560>; regulator-allow-set-load; }; + vreg_l3a_1p0: l3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; + vreg_l5a_0p8: l5 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <800000>; }; + vreg_l6a_1p8: l6 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l7a_1p8: l7 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l8a_1p2: l8 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; + vreg_l9a_1p8: l9 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l10a_1p8: l10 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l11a_1p0: l11 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; + vreg_l12a_1p8: l12 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l13a_2p95: l13 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; regulator-allow-set-load; }; + vreg_l14a_1p85: l14 { regulator-min-microvolt = <1848000>; regulator-max-microvolt = <1856000>; regulator-system-load = <32000>; regulator-allow-set-load; }; + vreg_l15a_1p8: l15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l16a_2p7: l16 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2704000>; }; + vreg_l17a_1p3: l17 { regulator-min-microvolt = <1304000>; regulator-max-microvolt = <1304000>; }; - vreg_l18a_2p85: l18 {}; + + vreg_l18a_2p85: l18 { }; + vreg_l19a_2p7: l19 { regulator-min-microvolt = <2696000>; regulator-max-microvolt = <2704000>; }; + vreg_l20a_2p95: l20 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; regulator-system-load = <10000>; regulator-allow-set-load; }; + vreg_l21a_2p95: l21 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; regulator-system-load = <800000>; regulator-allow-set-load; }; + vreg_l22a_2p85: l22 { }; + vreg_l23a_3p3: l23 { regulator-min-microvolt = <3312000>; regulator-max-microvolt = <3312000>; }; + vreg_l24a_3p075: l24 { regulator-min-microvolt = <3088000>; regulator-max-microvolt = <3088000>; }; + vreg_l25a_3p3: l25 { regulator-min-microvolt = <3104000>; regulator-max-microvolt = <3312000>; }; + vreg_l26a_1p2: l26 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-allow-set-load; }; + vreg_l28_3p0: l28 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; + vreg_lvs1a_1p8: lvs1 { }; + vreg_lvs2a_1p8: lvs2 { }; }; - pmi8998-regulators { + regulators-1 { compatible = "qcom,rpm-pmi8998-regulators"; vdd_bob-supply = <&vph_pwr>; @@ -565,14 +596,14 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - mdp_vsync_n: mdp-vsync-n { + mdp_vsync_n: mdp-vsync-n-state { pins = "gpio10"; function = "mdp_vsync_a"; drive-strength = <2>; bias-pull-down; }; - nfc_ven: nfc-ven { + nfc_ven: nfc-ven-state { pins = "gpio12"; function = "gpio"; bias-disable; @@ -580,42 +611,42 @@ output-low; }; - msm_mclk0_default: msm-mclk0-active { + msm_mclk0_default: msm-mclk0-active-state { pins = "gpio13"; function = "cam_mclk"; drive-strength = <2>; bias-disable; }; - msm_mclk1_default: msm-mclk1-active { + msm_mclk1_default: msm-mclk1-active-state { pins = "gpio14"; function = "cam_mclk"; drive-strength = <2>; bias-disable; }; - cci0_default: cci0-default { + cci0_default: cci0-default-state { pins = "gpio18", "gpio19"; function = "cci_i2c"; bias-disable; drive-strength = <2>; }; - cci1_default: cci1-default { + cci1_default: cci1-default-state { pins = "gpio19", "gpio20"; function = "cci_i2c"; bias-disable; drive-strength = <2>; }; - cam0_vdig_default: cam0-vdig-default { + cam0_vdig_default: cam0-vdig-default-state { pins = "gpio21"; function = "gpio"; bias-disable; drive-strength = <2>; }; - tof_int: tof-int { + tof_int: tof-int-state { pins = "gpio22"; function = "gpio"; bias-pull-up; @@ -623,28 +654,28 @@ input-enable; }; - cam1_vdig_default: cam1-vdig-default { + cam1_vdig_default: cam1-vdig-default-state { pins = "gpio25"; function = "gpio"; bias-disable; drive-strength = <2>; }; - usb_extcon_active: usb-extcon-active { + usb_extcon_active: usb-extcon-active-state { pins = "gpio38"; function = "gpio"; bias-disable; drive-strength = <16>; }; - tof_reset: tof-reset { + tof_reset: tof-reset-state { pins = "gpio27"; function = "gpio"; bias-disable; drive-strength = <2>; }; - hall_sensor0_default: acc-cover-open { + hall_sensor0_default: acc-cover-open-state { pins = "gpio124"; function = "gpio"; bias-disable; @@ -652,14 +683,14 @@ input-enable; }; - ts_int_n: ts-int-n { + ts_int_n: ts-int-n-state { pins = "gpio125"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; - usb_vbus_active: usb-vbus-active { + usb_vbus_active: usb-vbus-active-state { pins = "gpio128"; function = "gpio"; bias-disable; @@ -667,7 +698,7 @@ output-low; }; - ts_vddio_en: ts-vddio-en-default { + ts_vddio_en: ts-vddio-en-default-state { pins = "gpio133"; function = "gpio"; bias-disable; |