summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sdm845-db845c.dts')
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-db845c.dts169
1 files changed, 31 insertions, 138 deletions
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 132417e2d11e..f41c6d600ea8 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -22,7 +22,7 @@
aliases {
serial0 = &uart9;
- hsuart0 = &uart6;
+ serial1 = &uart6;
};
chosen {
@@ -120,9 +120,11 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- // TODO: make it possible to drive same GPIO from two clients
- // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
- // enable-active-high;
+ /*
+ * TODO: make it possible to drive same GPIO from two clients
+ * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+ * enable-active-high;
+ */
};
pcie0_1p05v: pcie-0-1p05v-regulator {
@@ -133,9 +135,11 @@
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- // TODO: make it possible to drive same GPIO from two clients
- // gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
- // enable-active-high;
+ /*
+ * TODO: make it possible to drive same GPIO from two clients
+ * gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
+ * enable-active-high;
+ */
};
cam0_dvdd_1v2: reg_cam0_dvdd_1v2 {
@@ -195,9 +199,11 @@
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <500000>;
- // TODO: make it possible to drive same GPIO from two clients
- // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
- // enable-active-high;
+ /*
+ * TODO: make it possible to drive same GPIO from two clients
+ * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+ * enable-active-high;
+ */
};
vbat: vbat-regulator {
@@ -649,9 +655,13 @@
};
};
+&pmi8998_rradc {
+ status = "okay";
+};
+
/* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */
&q6afedai {
- qi2s@22 {
+ dai@22 {
reg = <QUATERNARY_MI2S_RX>;
qcom,sd-lines = <0 1 2 3>;
};
@@ -986,6 +996,8 @@
&uart6 {
status = "okay";
+ pinctrl-0 = <&qup_uart6_4pin>;
+
bluetooth {
compatible = "qcom,wcn3990-bt";
@@ -1076,7 +1088,7 @@
status = "okay";
};
-&wcd9340{
+&wcd9340 {
pinctrl-0 = <&wcd_intr_default>;
pinctrl-names = "default";
clock-names = "extclk";
@@ -1089,7 +1101,7 @@
vdd-io-supply = <&vreg_s4a_1p8>;
swm: swm@c85 {
- left_spkr: wsa8810-left{
+ left_spkr: speaker@0,1 {
compatible = "sdw10217201000";
reg = <0 1>;
powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
@@ -1098,7 +1110,7 @@
#sound-dai-cells = <0>;
};
- right_spkr: wsa8810-right{
+ right_spkr: speaker@0,2 {
compatible = "sdw10217201000";
powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
reg = <0 2>;
@@ -1123,10 +1135,13 @@
/* PINCTRL - additions to nodes defined in sdm845.dtsi */
&qup_spi2_default {
- drive-strength = <16>;
+ pinconf {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30";
+ drive-strength = <16>;
+ };
};
-&qup_uart3_default{
+&qup_uart3_default {
pinmux {
pins = "gpio41", "gpio42", "gpio43", "gpio44";
function = "qup3";
@@ -1141,29 +1156,6 @@
};
};
-&qup_uart6_default {
- pinmux {
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
- function = "qup6";
- };
-
- cts {
- pins = "gpio45";
- bias-disable;
- };
-
- rts-tx {
- pins = "gpio46", "gpio47";
- drive-strength = <2>;
- bias-disable;
- };
-
- rx {
- pins = "gpio48";
- bias-pull-up;
- };
-};
-
&qup_uart9_default {
pinconf-tx {
pins = "gpio4";
@@ -1182,105 +1174,6 @@
};
-&cci {
- status = "okay";
-};
-
-&camss {
- vdda-phy-supply = <&vreg_l1a_0p875>;
- vdda-pll-supply = <&vreg_l26a_1p2>;
-
- status = "ok";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- csiphy0_ep: endpoint {
- data-lanes = <0 1 2 3>;
- remote-endpoint = <&ov8856_ep>;
- };
- };
- };
-};
-
-&cci_i2c0 {
- camera@10 {
- compatible = "ovti,ov8856";
- reg = <0x10>;
-
- // CAM0_RST_N
- reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&cam0_default>;
-
- clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
- clock-names = "xvclk";
- clock-frequency = <19200000>;
-
- /* The &vreg_s4a_1p8 trace is powered on as a,
- * so it is represented by a fixed regulator.
- *
- * The 2.8V vdda-supply and 1.2V vddd-supply regulators
- * both have to be enabled through the power management
- * gpios.
- */
- dovdd-supply = <&vreg_lvs1a_1p8>;
- avdd-supply = <&cam0_avdd_2v8>;
- dvdd-supply = <&cam0_dvdd_1v2>;
-
- status = "ok";
-
- port {
- ov8856_ep: endpoint {
- link-frequencies = /bits/ 64
- <360000000 180000000>;
- data-lanes = <1 2 3 4>;
- remote-endpoint = <&csiphy0_ep>;
- };
- };
- };
-};
-
-&cci_i2c1 {
- camera@60 {
- compatible = "ovti,ov7251";
-
- // I2C address as per ov7251.txt linux documentation
- reg = <0x60>;
-
- // CAM3_RST_N
- enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cam3_default>;
-
- clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
- clock-names = "xclk";
- clock-frequency = <24000000>;
-
- /* The &vreg_s4a_1p8 trace always powered on.
- *
- * The 2.8V vdda-supply regulator is enabled when the
- * vreg_s4a_1p8 trace is pulled high.
- * It too is represented by a fixed regulator.
- *
- * No 1.2V vddd-supply regulator is used.
- */
- vdddo-supply = <&vreg_lvs1a_1p8>;
- vdda-supply = <&cam3_avdd_2v8>;
-
- status = "disable";
-
- port {
- ov7251_ep: endpoint {
- data-lanes = <0 1>;
-// remote-endpoint = <&csiphy3_ep>;
- };
- };
- };
-};
-
/* PINCTRL - additions to nodes defined in sdm845.dtsi */
&qup_spi0_default {
config {