diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi | 199 |
1 files changed, 197 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi index 4984c7496c31..420ffede3e80 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -98,6 +98,11 @@ }; }; +&adsp_pas { + firmware-name = "qcom/sdm845/Sony/tama/adsp.mbn"; + status = "okay"; +}; + &apps_rsc { regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; @@ -228,6 +233,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-system-load = <62000>; }; vreg_l15a_1p8: ldo15 { @@ -314,6 +320,7 @@ regulator-min-microvolt = <2856000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-system-load = <100000>; }; vreg_lvs1a_1p8: lvs1 { @@ -356,6 +363,48 @@ }; }; +&cdsp_pas { + firmware-name = "qcom/sdm845/Sony/tama/cdsp.mbn"; + status = "okay"; +}; + +&dsi0 { + vdda-supply = <&vreg_l26a_1p2>; + status = "okay"; + + panel: panel@0 { + /* The compatible is assigned in device DTs. */ + reg = <0>; + + backlight = <&pmi8998_wled>; + vddio-supply = <&vreg_l14a_1p8>; + vsp-supply = <&lab>; + vsn-supply = <&ibb>; + panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>; + pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + vdds-supply = <&vreg_l1a_0p9>; + status = "okay"; +}; + &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -364,11 +413,64 @@ <GCC_LPASS_SWAY_CLK>; }; -&i2c5 { +&gmu { + status = "okay"; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/Sony/tama/a630_zap.mbn"; + }; +}; + +&i2c5 { clock-frequency = <400000>; + status = "okay"; + + touchscreen: touchscreen@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&vreg_l14a_1p8>; + /* + * This is a blatant abuse of OF, but the panel driver *needs* + * to probe first, as the power/gpio switching needs to be precisely + * timed in order for both the display and touch panel to function properly. + */ + incell-supply = <&panel>; + + syna,reset-delay-ms = <220>; + syna,startup-delay-ms = <1000>; - /* Synaptics touchscreen @ 2c, 3c */ + pinctrl-0 = <&ts_default>; + pinctrl-1 = <&ts_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; }; &i2c10 { @@ -388,6 +490,31 @@ /* AMS TCS3490 RGB+IR color sensor @ 72 */ }; +&ibb { + qcom,discharge-resistor-kohms = <300>; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5700000>; + regulator-min-microamp = <0>; + regulator-max-microamp = <800000>; + regulator-over-current-protection; + regulator-soft-start; + regulator-pull-down; +}; + +&lab { + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5700000>; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-over-current-protection; + regulator-soft-start; + regulator-pull-down; +}; + +&mdss { + status = "okay"; +}; + &pm8998_gpios { focus_n: focus-n-state { pins = "gpio2"; @@ -422,6 +549,16 @@ }; }; +&pmi8998_wled { + default-brightness = <800>; + qcom,switching-freq = <800>; + qcom,ovp-millivolt = <29600>; + qcom,current-boost-limit = <970>; + qcom,current-limit-microamp = <20000>; + qcom,enabled-strings = <0 1 2 3>; + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; @@ -465,6 +602,59 @@ bias-pull-up; }; }; + + sde_dsi_active: sde-dsi-active-state { + pins = "gpio6"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + sde_dsi_sleep: sde-dsi-sleep-state { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + sde_te_active_sleep: sde-te-active-sleep-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + ts_default: ts-default-state { + reset-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + int-pins { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + ts_sleep: ts-sleep-state { + reset-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + int-pins { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; }; &uart6 { @@ -500,3 +690,8 @@ vdda-pll-supply = <&vreg_l12a_1p8>; vdda-phy-dpdm-supply = <&vreg_l24a_3p1>; }; + +&venus { + firmware-name = "qcom/sdm845/Sony/tama/venus.mbn"; + status = "okay"; +}; |