diff options
Diffstat (limited to 'arch/arm64/boot/dts/renesas')
43 files changed, 1040 insertions, 326 deletions
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 68e30e26564b..15a53b513966 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -63,4 +63,12 @@ dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb +dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb +dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb + +dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb.dtb +dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb + dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi index e3c8b2fe143e..2692cc64bff6 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi @@ -197,6 +197,14 @@ compatible = "audio-graph-card"; label = "rcar-sound"; dais = <&rsnd_port0>, <&rsnd_port1>; + widgets = "Microphone", "Mic Jack", + "Line", "Line In Jack", + "Headphone", "Headphone Jack"; + mic-det-gpio = <&gpio0 2 GPIO_ACTIVE_LOW>; + routing = "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN3R", "MICBIAS", + "Mic Jack", "IN3R"; }; vccq_sdhi0: regulator-vccq-sdhi0 { diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi index 202c4fc88bd5..dde3a07bc417 100644 --- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi @@ -20,6 +20,7 @@ pinctrl-names = "default"; phy-handle = <&phy0>; tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <1800>; status = "okay"; phy0: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index 78c121a89f11..6f4fffacfca2 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -25,7 +25,7 @@ i2c4 = &i2c4; i2c5 = &i2c5; i2c6 = &i2c6; - i2c7 = &i2c_dvfs; + i2c7 = &iic_pmic; }; /* @@ -715,7 +715,7 @@ status = "disabled"; }; - i2c_dvfs: i2c@e60b0000 { + iic_pmic: i2c@e60b0000 { #address-cells = <1>; #size-cells = <0>; compatible = "renesas,iic-r8a774a1", diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index 28c612ce49c0..0f7bdfc90a0d 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -588,7 +588,7 @@ status = "disabled"; }; - i2c_dvfs: i2c@e60b0000 { + iic_pmic: i2c@e60b0000 { #address-cells = <1>; #size-cells = <0>; compatible = "renesas,iic-r8a774b1", diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index a5d4dce8476d..d597772c4c37 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -574,11 +574,13 @@ status = "disabled"; }; - i2c_dvfs: i2c@e60b0000 { + iic_pmic: i2c@e60b0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a774c0"; - reg = <0 0xe60b0000 0 0x15>; + compatible = "renesas,iic-r8a774c0", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 926>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts index 3e3b954a4a9d..c6ca61a8ed40 100644 --- a/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts @@ -47,76 +47,3 @@ clock-names = "du.0", "du.1", "du.2", "du.3", "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; }; - -&ehci2 { - status = "okay"; -}; - -&hdmi1 { - status = "okay"; - - ports { - port@1 { - reg = <1>; - rcar_dw_hdmi1_out: endpoint { - remote-endpoint = <&hdmi1_con>; - }; - }; - port@2 { - reg = <2>; - dw_hdmi1_snd_in: endpoint { - remote-endpoint = <&rsnd_endpoint2>; - }; - }; - }; -}; - -&hdmi1_con { - remote-endpoint = <&rcar_dw_hdmi1_out>; -}; - -&ohci2 { - status = "okay"; -}; - -&pfc { - usb2_pins: usb2 { - groups = "usb2"; - function = "usb2"; - }; -}; - -&rcar_sound { - ports { - /* rsnd_port0/1 are described in salvator-common.dtsi */ - rsnd_port2: port@2 { - reg = <2>; - rsnd_endpoint2: endpoint { - remote-endpoint = <&dw_hdmi1_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint2>; - frame-master = <&rsnd_endpoint2>; - - playback = <&ssi3>; - }; - }; - }; -}; - -&sata { - status = "okay"; -}; - -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2>; /* HDMI1 */ -}; - -&usb2_phy2 { - pinctrl-0 = <&usb2_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts index dcaaf12cec40..85f008ef63de 100644 --- a/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the H3ULCB Kingfisher board + * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3 ES1.x * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. diff --git a/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts index 38a6d6a108d4..5340579931e3 100644 --- a/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board + * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board with R-Car H3 ES1.x * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. diff --git a/arch/arm64/boot/dts/renesas/r8a77950.dtsi b/arch/arm64/boot/dts/renesas/r8a77950.dtsi index b643d3079db1..57eb88177e92 100644 --- a/arch/arm64/boot/dts/renesas/r8a77950.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77950.dtsi @@ -7,6 +7,8 @@ #include "r8a77951.dtsi" +#undef SOC_HAS_USB2_CH3 + &audma0 { iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>, <&ipmmu_mp1 2>, <&ipmmu_mp1 3>, diff --git a/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts index cf2165bdf625..d8e655ba81bd 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts @@ -47,76 +47,3 @@ clock-names = "du.0", "du.1", "du.2", "du.3", "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; }; - -&ehci2 { - status = "okay"; -}; - -&hdmi1 { - status = "okay"; - - ports { - port@1 { - reg = <1>; - rcar_dw_hdmi1_out: endpoint { - remote-endpoint = <&hdmi1_con>; - }; - }; - port@2 { - reg = <2>; - dw_hdmi1_snd_in: endpoint { - remote-endpoint = <&rsnd_endpoint2>; - }; - }; - }; -}; - -&hdmi1_con { - remote-endpoint = <&rcar_dw_hdmi1_out>; -}; - -&ohci2 { - status = "okay"; -}; - -&pfc { - usb2_pins: usb2 { - groups = "usb2"; - function = "usb2"; - }; -}; - -&rcar_sound { - ports { - /* rsnd_port0/1 are described in salvator-common.dtsi */ - rsnd_port2: port@2 { - reg = <2>; - rsnd_endpoint2: endpoint { - remote-endpoint = <&dw_hdmi1_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint2>; - frame-master = <&rsnd_endpoint2>; - - playback = <&ssi3>; - }; - }; - }; -}; - -&sata { - status = "okay"; -}; - -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2>; /* HDMI1 */ -}; - -&usb2_phy2 { - pinctrl-0 = <&usb2_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts index 37202fcdc35b..7f9fa842f01e 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts @@ -47,125 +47,3 @@ clock-names = "du.0", "du.1", "du.2", "du.3", "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; }; - -&ehci2 { - status = "okay"; -}; - -&ehci3 { - dr_mode = "otg"; - status = "okay"; -}; - -&hdmi1 { - status = "okay"; - - ports { - port@1 { - reg = <1>; - rcar_dw_hdmi1_out: endpoint { - remote-endpoint = <&hdmi1_con>; - }; - }; - port@2 { - reg = <2>; - dw_hdmi1_snd_in: endpoint { - remote-endpoint = <&rsnd_endpoint2>; - }; - }; - }; -}; - -&hdmi1_con { - remote-endpoint = <&rcar_dw_hdmi1_out>; -}; - -&hsusb3 { - dr_mode = "otg"; - status = "okay"; -}; - -&ohci2 { - status = "okay"; -}; - -&ohci3 { - dr_mode = "otg"; - status = "okay"; -}; - -&pca9654 { - pcie-sata-switch-hog { - gpio-hog; - gpios = <7 GPIO_ACTIVE_HIGH>; - output-low; /* enable SATA by default */ - line-name = "PCIE/SATA switch"; - }; -}; - -&pfc { - usb2_pins: usb2 { - groups = "usb2"; - function = "usb2"; - }; - - /* - * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins - * (when SW31 is the default setting on Salvator-XS). - * - If SW31 is the default setting, you cannot use USB2.0 ch3 on - * r8a77951 with Salvator-XS. - * Hence the SW31 setting must be changed like 2) below. - * 1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF: - * - Connect GP6_3[01] to ADV7842. - * 2) Changed setting of SW31: OFF-OFF-ON-ON-ON-ON: - * - Connect GP6_3[01] to BD082065 (USB2.0 ch3's host power). - * - Connect GP6_{04,21} to ADV7842. - */ - usb2_ch3_pins: usb2_ch3 { - groups = "usb2_ch3"; - function = "usb2_ch3"; - }; -}; - -&rcar_sound { - ports { - /* rsnd_port0/1 are described in salvator-common.dtsi */ - rsnd_port2: port@2 { - reg = <2>; - rsnd_endpoint2: endpoint { - remote-endpoint = <&dw_hdmi1_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint2>; - frame-master = <&rsnd_endpoint2>; - - playback = <&ssi3>; - }; - }; - }; -}; - -/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ -&sata { - status = "okay"; -}; - -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2>; /* HDMI1 */ -}; - -&usb2_phy2 { - pinctrl-0 = <&usb2_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&usb2_phy3 { - pinctrl-0 = <&usb2_ch3_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts index 11f943a67703..2e58a27aa276 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the H3ULCB Kingfisher board + * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3 ES2.0+ * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. diff --git a/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts index 8ad8f2a53977..06d4e948eb0f 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board + * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board with R-Car H3 ES2.0+ * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index 2e4c18b8eee4..1768a3e6bb8d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -11,6 +11,11 @@ #define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4 +#define SOC_HAS_HDMI1 +#define SOC_HAS_SATA +#define SOC_HAS_USB2_CH2 +#define SOC_HAS_USB2_CH3 + / { compatible = "renesas,r8a7795"; #address-cells = <2>; diff --git a/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts index 2151c37d77a6..02d61360692c 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the M3ULCB Kingfisher board + * Device Tree Source for the M3ULCB Kingfisher board with R-Car M3-W * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. diff --git a/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts index d041042a5619..4bfeb1df0488 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board + * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board with R-Car M3-W * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. diff --git a/arch/arm64/boot/dts/renesas/r8a77961-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77961-ulcb-kf.dts index 6ec958348eb0..d66eb27ee8c4 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961-ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a77961-ulcb-kf.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the M3ULCB Kingfisher board + * Device Tree Source for the M3ULCB Kingfisher board with R-Car M3-W+ * * Copyright (C) 2020 Eugeniu Rosca <rosca.eugeniu@gmail.com> */ diff --git a/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts index 294a055f117e..70cf926667a6 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board with R-Car - * M3-W+ + * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board with R-Car M3-W+ * * Copyright (C) 2020 Renesas Electronics Corp. */ diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index 91b501e0121e..041473aa5cd0 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -958,6 +958,14 @@ resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; }; dmac1: dma-controller@e7300000 { @@ -992,6 +1000,14 @@ resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; }; dmac2: dma-controller@e7310000 { @@ -1026,6 +1042,14 @@ resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; }; ipmmu_ds0: iommu@e6740000 { @@ -1160,6 +1184,7 @@ phy-mode = "rgmii"; rx-internal-delay-ps = <0>; tx-internal-delay-ps = <0>; + iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -2280,6 +2305,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -2292,6 +2318,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -2304,6 +2331,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; }; @@ -2316,6 +2344,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts index 729756c24c74..a1d3c8d531cf 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts @@ -30,17 +30,3 @@ clock-names = "du.0", "du.1", "du.3", "dclkin.0", "dclkin.1", "dclkin.3"; }; - -&pca9654 { - pcie-sata-switch-hog { - gpio-hog; - gpios = <7 GPIO_ACTIVE_HIGH>; - output-low; /* enable SATA by default */ - line-name = "PCIE/SATA switch"; - }; -}; - -/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ -&sata { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts index 12aa08fd6fd8..a601968c5727 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the M3NULCB Kingfisher board + * Device Tree Source for the M3NULCB Kingfisher board with R-Car M3-N * * Copyright (C) 2018 Renesas Electronics Corp. * Copyright (C) 2018 Cogent Embedded, Inc. diff --git a/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts index 964078b6cc49..71704b67a20e 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the M3NULCB (R-Car Starter Kit Pro) board + * Device Tree Source for the M3NULCB (R-Car Starter Kit Pro) board with R-Car M3-N * * Copyright (C) 2018 Renesas Electronics Corp. * Copyright (C) 2018 Cogent Embedded, Inc. diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index ad69da362a72..08df75606430 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -14,6 +14,8 @@ #define CPG_AUDIO_CLK_I R8A77965_CLK_S0D4 +#define SOC_HAS_SATA + / { compatible = "renesas,r8a77965"; #address-cells = <2>; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 5c84681703ed..d24da54f312b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the Eagle board + * Device Tree Source for the Eagle board with R-Car V3M * * Copyright (C) 2016-2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 7bde0a549c09..edf7f2a2f958 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the Condor board + * Device Tree Source for the Condor board with R-Car V3H * * Copyright (C) 2018 Renesas Electronics Corp. * Copyright (C) 2018 Cogent Embedded, Inc. diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 4715e4a4abe0..9c7146084ea1 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the ebisu board + * Device Tree Source for the Ebisu board with R-Car E3 * * Copyright (C) 2018 Renesas Electronics Corp. */ @@ -8,6 +8,7 @@ /dts-v1/; #include "r8a77990.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Renesas Ebisu board based on r8a77990"; @@ -80,6 +81,42 @@ }; }; + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW4-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW4-2"; + wakeup-source; + debounce-interval = <20>; + }; + key-3 { + gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW4-3"; + wakeup-source; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW4-4"; + wakeup-source; + debounce-interval = <20>; + }; + }; + lvds-decoder { compatible = "thine,thc63lvd1024"; vcc-supply = <®_3p3v>; @@ -473,6 +510,12 @@ rohm,ddr-backup-power = <0x1>; rohm,rstbmode-level; }; + + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; }; &lvds0 { @@ -540,6 +583,11 @@ function = "intc_ex"; }; + keys_pins: keys { + pins = "GP_5_10", "GP_5_11", "GP_5_12", "GP_5_13"; + bias-pull-up; + }; + pwm3_pins: pwm3 { groups = "pwm3_b"; function = "pwm3"; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 4d0304bc9745..0ea300a8147d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -290,8 +290,10 @@ i2c_dvfs: i2c@e60b0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a77990"; - reg = <0 0xe60b0000 0 0x15>; + compatible = "renesas,iic-r8a77990", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 926>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 6783c3ad0856..1ac15aa05b82 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the Draak board + * Device Tree Source for the Draak board with R-Car D3 * * Copyright (C) 2016-2018 Renesas Electronics Corp. * Copyright (C) 2017 Glider bvba @@ -9,6 +9,7 @@ /dts-v1/; #include "r8a77995.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Renesas Draak board based on r8a77995"; @@ -19,6 +20,16 @@ ethernet0 = &avb; }; + audio_clkout: audio-clkout { + /* + * This is same as <&rcar_sound 0> + * but needed to avoid cs2000/rcar_sound probe dead-lock + */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12288000>; + }; + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 50000>; @@ -67,6 +78,42 @@ }; }; + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW56-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW56-2"; + wakeup-source; + debounce-interval = <20>; + }; + key-3 { + gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW56-3"; + wakeup-source; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW56-4"; + wakeup-source; + debounce-interval = <20>; + }; + }; + lvds-decoder { compatible = "thine,thc63lvd1024"; vcc-supply = <®_3p3v>; @@ -124,6 +171,14 @@ regulator-always-on; }; + sound_card: sound { + compatible = "audio-graph-card"; + + dais = <&rsnd_port0 /* ak4613 */ + /* HDMI is not yet supported */ + >; + }; + vga { compatible = "vga-connector"; @@ -161,6 +216,25 @@ #clock-cells = <0>; clock-frequency = <74250000>; }; + + x19_clk: x19 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +}; + +&audio_clk_b { + /* + * X11 is connected to VI4_FIELD/SCIF_CLK/AUDIO_CLKB, + * and R-Car Sound uses AUDIO_CLKB. + * Note is that schematic indicates VI4_FIELD conection only + * not AUDIO_CLKB at SoC page. + * And this VI4_FIELD/SCIF_CLK/AUDIO_CLKB is connected to SW60. + * SW60 should be 1-2. + */ + + clock-frequency = <22579200>; }; &avb { @@ -236,6 +310,28 @@ pinctrl-names = "default"; status = "okay"; + ak4613: codec@10 { + compatible = "asahi-kasei,ak4613"; + #sound-dai-cells = <0>; + reg = <0x10>; + clocks = <&rcar_sound 0>; /* audio_clkout */ + + asahi-kasei,in1-single-end; + asahi-kasei,in2-single-end; + asahi-kasei,out1-single-end; + asahi-kasei,out2-single-end; + asahi-kasei,out3-single-end; + asahi-kasei,out4-single-end; + asahi-kasei,out5-single-end; + asahi-kasei,out6-single-end; + + port { + ak4613_endpoint: endpoint { + remote-endpoint = <&rsnd_for_ak4613>; + }; + }; + }; + composite-in@20 { compatible = "adi,adv7180cp"; reg = <0x20>; @@ -277,10 +373,6 @@ interrupt-parent = <&gpio1>; interrupts = <28 IRQ_TYPE_LEVEL_LOW>; - /* Depends on LVDS */ - max-clock = <135000000>; - min-vrefresh = <50>; - adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; @@ -342,6 +434,17 @@ }; }; + cs2000: clk-multiplier@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&audio_clkout>, <&x19_clk>; /* audio_clkout_1, x19 */ + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; + eeprom@50 { compatible = "rohm,br24t01", "atmel,24c01"; reg = <0x50>; @@ -422,6 +525,11 @@ function = "i2c1"; }; + keys_pins: keys { + pins = "GP_4_12", "GP_4_13", "GP_4_14", "GP_4_15"; + bias-pull-up; + }; + pwm0_pins: pwm0 { groups = "pwm0_c"; function = "pwm0"; @@ -449,6 +557,17 @@ power-source = <1800>; }; + sound_pins: sound { + groups = "ssi34_ctrl", "ssi3_data", "ssi4_data_a"; + function = "ssi"; + }; + + sound_clk_pins: sound-clk { + groups = "audio_clk_a", "audio_clk_b", + "audio_clkout", "audio_clkout1"; + function = "audio_clk"; + }; + usb0_pins: usb0 { groups = "usb0"; function = "usb0"; @@ -474,6 +593,42 @@ status = "okay"; }; +&rcar_sound { + pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1 */ + #clock-cells = <1>; + clock-frequency = <12288000 11289600>; + + status = "okay"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>, + <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&cs2000>, <&audio_clk_b>, + <&cpg CPG_CORE R8A77995_CLK_ZA2>; + + ports { + rsnd_port0: port { + rsnd_for_ak4613: endpoint { + remote-endpoint = <&ak4613_endpoint>; + dai-format = "left_j"; + bitclock-master = <&rsnd_for_ak4613>; + frame-master = <&rsnd_for_ak4613>; + playback = <&ssi3>, <&src5>, <&dvc0>; + capture = <&ssi4>, <&src6>, <&dvc1>; + }; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; @@ -502,6 +657,10 @@ status = "okay"; }; +&ssi4 { + shared-pin; +}; + &usb2_phy0 { pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index 84dba3719381..16ad5fc23a67 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -15,6 +15,23 @@ #address-cells = <2>; #size-cells = <2>; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + /* External CAN clock - to be overridden by boards that provide it */ can_clk: can { compatible = "fixed-clock"; @@ -1016,6 +1033,147 @@ status = "disabled"; }; + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a77995", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>, + <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&cpg CPG_CORE R8A77995_CLK_ZA2>; + clock-names = "ssi-all", + "ssi.4", "ssi.3", + "src.6", "src.5", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_i"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1011>, <&cpg 1012>; + reset-names = "ssi-all", + "ssi.4", "ssi.3"; + status = "disabled"; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,src { + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma0 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma0 0xb4>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma0 0x08>, + <&audma0 0x6f>, <&audma0 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma0 0x0a>, + <&audma0 0x71>, <&audma0 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a77995", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>, + <&ipmmu_mp 2>, <&ipmmu_mp 3>, + <&ipmmu_mp 4>, <&ipmmu_mp 5>, + <&ipmmu_mp 6>, <&ipmmu_mp 7>, + <&ipmmu_mp 8>, <&ipmmu_mp 9>, + <&ipmmu_mp 10>, <&ipmmu_mp 11>, + <&ipmmu_mp 12>, <&ipmmu_mp 13>, + <&ipmmu_mp 14>, <&ipmmu_mp 15>; + }; + ohci0: usb@ee080000 { compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts index 687f019e79f0..dc671ff57ec7 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the Falcon CPU and BreakOut boards + * Device Tree Source for the Falcon CPU and BreakOut boards with R-Car V3U * * Copyright (C) 2020 Renesas Electronics Corp. */ diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index 78ca75f619f6..631d520cebee 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -327,6 +327,19 @@ #power-domain-cells = <1>; }; + tsc: thermal@e6190000 { + compatible = "renesas,r8a779a0-thermal"; + reg = <0 0xe6190000 0 0x200>, + <0 0xe6198000 0 0x200>, + <0 0xe61a0000 0 0x200>, + <0 0xe61a8000 0 0x200>, + <0 0xe61b0000 0 0x200>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 919>; + #thermal-sensor-cells = <1>; + }; + tmu0: timer@e61e0000 { compatible = "renesas,tmu-r8a779a0", "renesas,tmu"; reg = <0 0xe61e0000 0 0x30>; @@ -392,19 +405,6 @@ status = "disabled"; }; - tsc: thermal@e6190000 { - compatible = "renesas,r8a779a0-thermal"; - reg = <0 0xe6190000 0 0x200>, - <0 0xe6198000 0 0x200>, - <0 0xe61a0000 0 0x200>, - <0 0xe61a8000 0 0x200>, - <0 0xe61b0000 0 0x200>; - clocks = <&cpg CPG_MOD 919>; - power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 919>; - #thermal-sensor-cells = <1>; - }; - i2c0: i2c@e6500000 { compatible = "renesas,i2c-r8a779a0", "renesas,rcar-gen3-i2c"; diff --git a/arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts new file mode 100644 index 000000000000..084b75b04680 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the Salvator-X 2nd version board with R-Car H3e-2G + * + * Copyright (C) 2021 Glider bv + * + * Based on r8a77951-salvator-xs.dts + * Copyright (C) 2015-2017 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a779m1.dtsi" +#include "salvator-xs.dtsi" + +/ { + model = "Renesas Salvator-X 2nd version board based on r8a779m1"; + compatible = "renesas,salvator-xs", "renesas,r8a779m1", + "renesas,r8a7795"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + memory@500000000 { + device_type = "memory"; + reg = <0x5 0x00000000 0x0 0x40000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x40000000>; + }; + + memory@700000000 { + device_type = "memory"; + reg = <0x7 0x00000000 0x0 0x40000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 721>, + <&versaclock6 1>, + <&x21_clk>, + <&x22_clk>, + <&versaclock6 2>; + clock-names = "du.0", "du.1", "du.2", "du.3", + "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m1-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a779m1-ulcb-kf.dts new file mode 100644 index 000000000000..0baebc5c58b0 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m1-ulcb-kf.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3e-2G + * + * Copyright (C) 2021 Glider bv + * + * Based on r8a77951-ulcb-kf.dts + * Copyright (C) 2017 Renesas Electronics Corp. + * Copyright (C) 2017 Cogent Embedded, Inc. + */ + +#include "r8a779m1-ulcb.dts" +#include "ulcb-kf.dtsi" + +/ { + model = "Renesas H3ULCB Kingfisher board based on r8a779m1"; + compatible = "shimafuji,kingfisher", "renesas,h3ulcb", + "renesas,r8a779m1", "renesas,r8a7795"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts new file mode 100644 index 000000000000..e294b6bda28c --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) with R-Car H3e-2G + * + * Copyright (C) 2021 Glider bv + * + * Based on r8a77951-ulcb.dts + * + * Copyright (C) 2016 Renesas Electronics Corp. + * Copyright (C) 2016 Cogent Embedded, Inc. + */ + +/dts-v1/; +#include "r8a779m1.dtsi" +#include "ulcb.dtsi" + +/ { + model = "Renesas H3ULCB board based on r8a779m1"; + compatible = "renesas,h3ulcb", "renesas,r8a779m1", "renesas,r8a7795"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + memory@500000000 { + device_type = "memory"; + reg = <0x5 0x00000000 0x0 0x40000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x40000000>; + }; + + memory@700000000 { + device_type = "memory"; + reg = <0x7 0x00000000 0x0 0x40000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 721>, + <&versaclock5 1>, + <&versaclock5 3>, + <&versaclock5 4>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", "du.3", + "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m1.dtsi b/arch/arm64/boot/dts/renesas/r8a779m1.dtsi new file mode 100644 index 000000000000..0e9b04469b83 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m1.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car H3e-2G (R8A779M1) SoC + * + * Copyright (C) 2021 Glider bv + */ + +#include "r8a77951.dtsi" + +/ { + compatible = "renesas,r8a779m1", "renesas,r8a7795"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts new file mode 100644 index 000000000000..4ab26fd7233d --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the Salvator-X 2nd version board with R-Car M3e-2G + * + * Copyright (C) 2021 Glider bv + * + * Based on r8a77961-salvator-xs.dts + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a779m3.dtsi" +#include "salvator-xs.dtsi" + +/ { + model = "Renesas Salvator-X 2nd version board based on r8a779m3"; + compatible = "renesas,salvator-xs", "renesas,r8a779m3", + "renesas,r8a77961"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x1 0x00000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock6 1>, + <&x21_clk>, + <&versaclock6 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m3-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a779m3-ulcb-kf.dts new file mode 100644 index 000000000000..6bacee1d2ef5 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m3-ulcb-kf.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the M3ULCB Kingfisher board with R-Car M3e-2G + * + * Copyright (C) 2021 Glider bv + * + * Based on r8a77961-ulcb-kf.dts + * Copyright (C) 2020 Eugeniu Rosca <rosca.eugeniu@gmail.com> + */ + +#include "r8a779m3-ulcb.dts" +#include "ulcb-kf.dtsi" + +/ { + model = "Renesas M3ULCB Kingfisher board based on r8a779m3"; + compatible = "shimafuji,kingfisher", "renesas,m3ulcb", + "renesas,r8a779m3", "renesas,r8a77961"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts new file mode 100644 index 000000000000..8f215a0b771b --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) with R-Car M3e-2G + * + * Copyright (C) 2021 Glider bv + * + * Based on r8a77961-ulcb.dts + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a779m3.dtsi" +#include "ulcb.dtsi" + +/ { + model = "Renesas M3ULCB board based on r8a779m3"; + compatible = "renesas,m3ulcb", "renesas,r8a779m3", "renesas,r8a77961"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x1 0x00000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock5 1>, + <&versaclock5 3>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m3.dtsi b/arch/arm64/boot/dts/renesas/r8a779m3.dtsi new file mode 100644 index 000000000000..65bb6188ccf5 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m3.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car M3e-2G (R8A779M3) SoC + * + * Copyright (C) 2021 Glider bv + */ + +#include "r8a77961.dtsi" + +/ { + compatible = "renesas,r8a779m3", "renesas,r8a77961"; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index 734c8adeceba..5f3bc2898daf 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -13,6 +13,13 @@ #address-cells = <2>; #size-cells = <2>; + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */ extal_clk: extal { compatible = "fixed-clock"; @@ -82,11 +89,175 @@ <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "eri", "rxi", "txi", "bri", "dri", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_CLK_SCIF0>; + clocks = <&cpg CPG_MOD R9A07G044_SCIF0_CLK_PCK>; clock-names = "fck"; power-domains = <&cpg>; - resets = <&cpg R9A07G044_CLK_SCIF0>; + resets = <&cpg R9A07G044_SCIF0_RST_SYSTEM_N>; + status = "disabled"; + }; + + canfd: can@10050000 { + compatible = "renesas,r9a07g044-canfd", "renesas,rzg2l-canfd"; + reg = <0 0x10050000 0 0x8000>; + interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "g_err", "g_recc", + "ch0_err", "ch0_rec", "ch0_trx", + "ch1_err", "ch1_rec", "ch1_trx"; + clocks = <&cpg CPG_MOD R9A07G044_CANFD_PCLK>, + <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>; + assigned-clock-rates = <50000000>; + resets = <&cpg R9A07G044_CANFD_RSTP_N>, + <&cpg R9A07G044_CANFD_RSTC_N>; + reset-names = "rstp_n", "rstc_n"; + power-domains = <&cpg>; status = "disabled"; + + channel0 { + status = "disabled"; + }; + channel1 { + status = "disabled"; + }; + }; + + i2c0: i2c@10058000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; + reg = <0 0x10058000 0 0x400>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G044_I2C0_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G044_I2C0_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + i2c1: i2c@10058400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; + reg = <0 0x10058400 0 0x400>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G044_I2C1_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G044_I2C1_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + i2c2: i2c@10058800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; + reg = <0 0x10058800 0 0x400>; + interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G044_I2C2_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G044_I2C2_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + i2c3: i2c@10058c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; + reg = <0 0x10058c00 0 0x400>; + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G044_I2C3_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G044_I2C3_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + adc: adc@10059000 { + compatible = "renesas,r9a07g044-adc", "renesas,rzg2l-adc"; + reg = <0 0x10059000 0 0x400>; + interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD R9A07G044_ADC_ADCLK>, + <&cpg CPG_MOD R9A07G044_ADC_PCLK>; + clock-names = "adclk", "pclk"; + resets = <&cpg R9A07G044_ADC_PRESETN>, + <&cpg R9A07G044_ADC_ADRST_N>; + reset-names = "presetn", "adrst-n"; + power-domains = <&cpg>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + channel@1 { + reg = <1>; + }; + channel@2 { + reg = <2>; + }; + channel@3 { + reg = <3>; + }; + channel@4 { + reg = <4>; + }; + channel@5 { + reg = <5>; + }; + channel@6 { + reg = <6>; + }; + channel@7 { + reg = <7>; + }; }; cpg: clock-controller@11010000 { @@ -111,6 +282,19 @@ status = "disabled"; }; + pinctrl: pin-controller@11030000 { + compatible = "renesas,r9a07g044-pinctrl"; + reg = <0 0x11030000 0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 392>; + clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_GPIO_RSTN>, + <&cpg R9A07G044_GPIO_PORT_RESETN>, + <&cpg R9A07G044_GPIO_SPARE_RESETN>; + }; + gic: interrupt-controller@11900000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 453ffcef24fa..eb1f3b82300b 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -202,7 +202,11 @@ label = "rcar-sound"; dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1>; /* HDMI0 */ + &rsnd_port1 /* HDMI0 */ +#ifdef SOC_HAS_HDMI1 + &rsnd_port2 /* HDMI1 */ +#endif + >; }; vbus0_usb2: regulator-vbus0-usb2 { @@ -422,6 +426,31 @@ remote-endpoint = <&rcar_dw_hdmi0_out>; }; +#ifdef SOC_HAS_HDMI1 +&hdmi1 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + rcar_dw_hdmi1_out: endpoint { + remote-endpoint = <&hdmi1_con>; + }; + }; + port@2 { + reg = <2>; + dw_hdmi1_snd_in: endpoint { + remote-endpoint = <&rsnd_endpoint2>; + }; + }; + }; +}; + +&hdmi1_con { + remote-endpoint = <&rcar_dw_hdmi1_out>; +}; +#endif /* SOC_HAS_HDMI1 */ + &hscif1 { pinctrl-0 = <&hscif1_pins>; pinctrl-names = "default"; @@ -818,6 +847,21 @@ playback = <&ssi2>; }; }; + +#ifdef SOC_HAS_HDMI1 + rsnd_port2: port@2 { + reg = <2>; + rsnd_endpoint2: endpoint { + remote-endpoint = <&dw_hdmi1_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint2>; + frame-master = <&rsnd_endpoint2>; + + playback = <&ssi3>; + }; + }; +#endif /* SOC_HAS_HDMI1 */ }; }; @@ -826,6 +870,12 @@ status = "okay"; }; +#ifdef SOC_HAS_SATA +&sata { + status = "okay"; +}; +#endif /* SOC_HAS_SATA */ + &scif1 { pinctrl-0 = <&scif1_pins>; pinctrl-names = "default"; @@ -973,3 +1023,27 @@ status = "okay"; }; + +#ifdef SOC_HAS_USB2_CH2 +&ehci2 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&pfc { + usb2_pins: usb2 { + groups = "usb2"; + function = "usb2"; + }; +}; + +&usb2_phy2 { + pinctrl-0 = <&usb2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; +#endif /* SOC_HAS_USB2_CH2 */ diff --git a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi index 717d42758cbc..08b925624e12 100644 --- a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi @@ -27,3 +27,59 @@ clock-names = "xin"; }; }; + +#ifdef SOC_HAS_SATA +&pca9654 { + pcie-sata-switch-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-low; /* enable SATA by default */ + line-name = "PCIE/SATA switch"; + }; +}; + +/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ +#endif /* SOC_HAS_SATA */ + +#ifdef SOC_HAS_USB2_CH3 +&ehci3 { + dr_mode = "otg"; + status = "okay"; +}; + +&hsusb3 { + dr_mode = "otg"; + status = "okay"; +}; + +&ohci3 { + dr_mode = "otg"; + status = "okay"; +}; + +&pfc { + /* + * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins + * (when SW31 is the default setting on Salvator-XS). + * - If SW31 is the default setting, you cannot use USB2.0 ch3 on + * r8a77951 with Salvator-XS. + * Hence the SW31 setting must be changed like 2) below. + * 1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF: + * - Connect GP6_3[01] to ADV7842. + * 2) Changed setting of SW31: OFF-OFF-ON-ON-ON-ON: + * - Connect GP6_3[01] to BD082065 (USB2.0 ch3's host power). + * - Connect GP6_{04,21} to ADV7842. + */ + usb2_ch3_pins: usb2_ch3 { + groups = "usb2_ch3"; + function = "usb2_ch3"; + }; +}; + +&usb2_phy3 { + pinctrl-0 = <&usb2_ch3_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; +#endif /* SOC_HAS_USB2_CH3 */ |