diff options
Diffstat (limited to 'arch/arm64')
299 files changed, 16011 insertions, 4622 deletions
diff --git a/arch/arm64/Kbuild b/arch/arm64/Kbuild index 7b393cfec071..ea7ab4ca81f9 100644 --- a/arch/arm64/Kbuild +++ b/arch/arm64/Kbuild @@ -2,4 +2,5 @@ obj-y += kernel/ mm/ net/ obj-$(CONFIG_KVM) += kvm/ obj-$(CONFIG_XEN) += xen/ +obj-$(subst m,y,$(CONFIG_HYPERV)) += hyperv/ obj-$(CONFIG_CRYPTO) += crypto/ diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index e07e7de9ac49..077f2ec4eeb2 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -130,8 +130,6 @@ config ARM64 select GENERIC_PTDUMP select GENERIC_SCHED_CLOCK select GENERIC_SMP_IDLE_THREAD - select GENERIC_STRNCPY_FROM_USER - select GENERIC_STRNLEN_USER select GENERIC_TIME_VSYSCALL select GENERIC_GETTIMEOFDAY select GENERIC_VDSO_TIME_NS @@ -156,6 +154,7 @@ config ARM64 select HAVE_ARCH_KGDB select HAVE_ARCH_MMAP_RND_BITS select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT + select HAVE_ARCH_PFN_VALID select HAVE_ARCH_PREL32_RELOCATIONS select HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET select HAVE_ARCH_SECCOMP_FILTER @@ -221,6 +220,7 @@ config ARM64 select SYSCTL_EXCEPTION_TRACE select THREAD_INFO_IN_TASK select HAVE_ARCH_USERFAULTFD_MINOR if USERFAULTFD + select TRACE_IRQFLAGS_SUPPORT help ARM 64-bit (AArch64) Linux support. @@ -288,9 +288,6 @@ config ILLEGAL_POINTER_VALUE config LOCKDEP_SUPPORT def_bool y -config TRACE_IRQFLAGS_SUPPORT - def_bool y - config GENERIC_BUG def_bool y depends on BUG @@ -1605,7 +1602,8 @@ config ARM64_BTI_KERNEL depends on CC_HAS_BRANCH_PROT_PAC_RET_BTI # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94697 depends on !CC_IS_GCC || GCC_VERSION >= 100100 - depends on !(CC_IS_CLANG && GCOV_KERNEL) + # https://github.com/llvm/llvm-project/commit/a88c722e687e6780dcd6a58718350dc76fcc4cc9 + depends on !CC_IS_CLANG || CLANG_VERSION >= 120000 depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_REGS) help Build the kernel with Branch Target Identification annotations @@ -1799,11 +1797,11 @@ config RANDOMIZE_BASE If unsure, say N. config RANDOMIZE_MODULE_REGION_FULL - bool "Randomize the module region over a 4 GB range" + bool "Randomize the module region over a 2 GB range" depends on RANDOMIZE_BASE default y help - Randomizes the location of the module region inside a 4 GB window + Randomizes the location of the module region inside a 2 GB window covering the core kernel. This way, it is less likely for modules to leak information about the location of core kernel data structures but it does imply that function calls between modules and the core @@ -1811,7 +1809,10 @@ config RANDOMIZE_MODULE_REGION_FULL When this option is not set, the module region will be randomized over a limited range that contains the [_stext, _etext] interval of the - core kernel, so branch relocations are always in range. + core kernel, so branch relocations are almost always in range unless + ARM64_MODULE_PLTS is enabled and the region is exhausted. In this + particular case of region exhaustion, modules might be able to fall + back to a larger 2GB area. config CC_HAVE_STACKPROTECTOR_SYSREG def_bool $(cc-option,-mstack-protector-guard=sysreg -mstack-protector-guard-reg=sp_el0 -mstack-protector-guard-offset=0) diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 7bc37d0a1b68..c744b1e7b356 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -21,19 +21,11 @@ LDFLAGS_vmlinux += -shared -Bsymbolic -z notext \ endif ifeq ($(CONFIG_ARM64_ERRATUM_843419),y) - ifneq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y) -$(warning ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum) - else + ifeq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y) LDFLAGS_vmlinux += --fix-cortex-a53-843419 endif endif -ifeq ($(CONFIG_ARM64_USE_LSE_ATOMICS), y) - ifneq ($(CONFIG_ARM64_LSE_ATOMICS), y) -$(warning LSE atomics not supported by binutils) - endif -endif - cc_has_k_constraint := $(call try-run,echo \ 'int main(void) { \ asm volatile("and w0, w0, %w0" :: "K" (4294967295)); \ @@ -165,8 +157,11 @@ Image: vmlinux Image.%: Image $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ -zinstall install: - $(Q)$(MAKE) $(build)=$(boot) $@ +install: install-image := Image +zinstall: install-image := Image.gz +install zinstall: + $(CONFIG_SHELL) $(srctree)/$(boot)/install.sh $(KERNELRELEASE) \ + $(boot)/$(install-image) System.map "$(INSTALL_PATH)" PHONY += vdso_install vdso_install: @@ -176,10 +171,23 @@ vdso_install: archprepare: $(Q)$(MAKE) $(build)=arch/arm64/tools kapi +ifeq ($(CONFIG_ARM64_ERRATUM_843419),y) + ifneq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y) + @echo "warning: ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum" >&2 + endif +endif +ifeq ($(CONFIG_ARM64_USE_LSE_ATOMICS),y) + ifneq ($(CONFIG_ARM64_LSE_ATOMICS),y) + @echo "warning: LSE atomics not supported by binutils" >&2 + endif +endif + # We use MRPROPER_FILES and CLEAN_FILES now archclean: $(Q)$(MAKE) $(clean)=$(boot) + $(Q)$(MAKE) $(clean)=arch/arm64/kernel/vdso + $(Q)$(MAKE) $(clean)=arch/arm64/kernel/vdso32 ifeq ($(KBUILD_EXTMOD),) # We need to generate vdso-offsets.h before compiling certain files in kernel/. diff --git a/arch/arm64/boot/Makefile b/arch/arm64/boot/Makefile index cd3414898d10..ebe80faab883 100644 --- a/arch/arm64/boot/Makefile +++ b/arch/arm64/boot/Makefile @@ -35,11 +35,3 @@ $(obj)/Image.lzma: $(obj)/Image FORCE $(obj)/Image.lzo: $(obj)/Image FORCE $(call if_changed,lzo) - -install: - $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ - $(obj)/Image System.map "$(INSTALL_PATH)" - -zinstall: - $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ - $(obj)/Image.gz System.map "$(INSTALL_PATH)" diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts index be81330db14f..8f2a80f128de 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts @@ -32,14 +32,21 @@ }; }; - reg_vcc3v3: vcc3v3 { + reg_vcc1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_vcc3v3: regulator-vcc3v3 { compatible = "regulator-fixed"; regulator-name = "vcc3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - reg_vdd_cpu_gpu: vdd-cpu-gpu { + reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu { compatible = "regulator-fixed"; regulator-name = "vdd-cpu-gpu"; regulator-min-microvolt = <1135000>; @@ -91,6 +98,16 @@ status = "okay"; }; +&mmc2 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc1v8>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + mmc-hs200-1_8v; + status = "okay"; +}; + &ohci0 { status = "okay"; }; @@ -99,6 +116,12 @@ status = "okay"; }; +&pio { + vcc-pc-supply = <®_vcc1v8>; + vcc-pd-supply = <®_vcc3v3>; + vcc-pg-supply = <®_vcc1v8>; +}; + &r_ir { linux,rc-map-name = "rc-tanix-tx5max"; status = "okay"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 7273eed5292c..7d94160f5802 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -385,9 +385,20 @@ /* Bluetooth on AP6212 */ &uart_A { - status = "disabled"; + status = "okay"; pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&wifi_32k>; + clock-names = "lpo"; + vbat-supply = <&vddio_ao3v3>; + vddio-supply = <&vddio_ao18>; + host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; + }; }; /* 40-pin CON1 */ diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 9b0b81f191f1..66daf3af34c3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -4,6 +4,7 @@ */ #include "meson-gxbb.dtsi" +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "tronsmart,vega-s95", "amlogic,meson-gxbb"; @@ -17,6 +18,13 @@ stdout-path = "serial0:115200n8"; }; + spdif_dit: audio-codec-0 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + leds { compatible = "gpio-leds"; @@ -97,6 +105,59 @@ clocks = <&wifi32k>; clock-names = "ext_clock"; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "VEGA-S95"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-3 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link-4 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; + pinctrl-0 = <&spdif_out_y_pins>; + pinctrl-names = "default"; }; &cec_AO { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 60feac0179c0..6ab1cc125b96 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -218,6 +218,8 @@ }; &sd_emmc_a { + max-frequency = <100000000>; + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 18a4b7a6c5df..86bdc0baf032 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -307,7 +307,8 @@ #size-cells = <0>; bus-width = <4>; - max-frequency = <60000000>; + cap-sd-highspeed; + max-frequency = <100000000>; non-removable; disable-wp; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index dfa7a37a1281..236c0a144142 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "meson-gxm.dtsi" +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "nexbox,a1", "amlogic,s912", "amlogic,meson-gxm"; @@ -24,6 +25,13 @@ stdout-path = "serial0:115200n8"; }; + spdif_dit: audio-codec-0 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; @@ -75,6 +83,59 @@ }; }; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "NEXBOX-A1"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-3 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link-4 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; + pinctrl-0 = <&spdif_out_h_pins>; + pinctrl-names = "default"; }; &cec_AO { diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 18a912eee360..6a6f7dd1d65c 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -52,6 +52,38 @@ #address-cells = <1>; #size-cells = <0>; + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + cpu0: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a53"; @@ -62,6 +94,13 @@ clock-names = "apolloclk"; operating-points-v2 = <&cluster_a53_opp_table>; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&cluster_a53_l2>; }; cpu1: cpu@101 { @@ -72,6 +111,13 @@ clock-frequency = <1300000000>; operating-points-v2 = <&cluster_a53_opp_table>; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&cluster_a53_l2>; }; cpu2: cpu@102 { @@ -82,6 +128,13 @@ clock-frequency = <1300000000>; operating-points-v2 = <&cluster_a53_opp_table>; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&cluster_a53_l2>; }; cpu3: cpu@103 { @@ -92,6 +145,13 @@ clock-frequency = <1300000000>; operating-points-v2 = <&cluster_a53_opp_table>; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&cluster_a53_l2>; }; cpu4: cpu@0 { @@ -104,6 +164,13 @@ clock-names = "atlasclk"; operating-points-v2 = <&cluster_a57_opp_table>; #cooling-cells = <2>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cluster_a57_l2>; }; cpu5: cpu@1 { @@ -114,6 +181,13 @@ clock-frequency = <1900000000>; operating-points-v2 = <&cluster_a57_opp_table>; #cooling-cells = <2>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cluster_a57_l2>; }; cpu6: cpu@2 { @@ -124,6 +198,13 @@ clock-frequency = <1900000000>; operating-points-v2 = <&cluster_a57_opp_table>; #cooling-cells = <2>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cluster_a57_l2>; }; cpu7: cpu@3 { @@ -134,6 +215,27 @@ clock-frequency = <1900000000>; operating-points-v2 = <&cluster_a57_opp_table>; #cooling-cells = <2>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cluster_a57_l2>; + }; + + cluster_a57_l2: l2-cache0 { + compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; + }; + + cluster_a53_l2: l2-cache1 { + compatible = "cache"; + cache-size = <0x40000>; + cache-line-size = <64>; + cache-sets = <256>; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 10244e59d56d..c73a597ca66e 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -54,6 +54,13 @@ compatible = "arm,cortex-a57"; reg = <0x0>; enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&atlas_l2>; }; cpu_atlas1: cpu@1 { @@ -61,6 +68,13 @@ compatible = "arm,cortex-a57"; reg = <0x1>; enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&atlas_l2>; }; cpu_atlas2: cpu@2 { @@ -68,6 +82,13 @@ compatible = "arm,cortex-a57"; reg = <0x2>; enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&atlas_l2>; }; cpu_atlas3: cpu@3 { @@ -75,6 +96,20 @@ compatible = "arm,cortex-a57"; reg = <0x3>; enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&atlas_l2>; + }; + + atlas_l2: l2-cache0 { + compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; }; }; @@ -102,7 +137,7 @@ #address-cells = <0>; interrupt-controller; reg = <0x11001000 0x1000>, - <0x11002000 0x1000>, + <0x11002000 0x2000>, <0x11004000 0x2000>, <0x11006000 0x2000>; }; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 25806c4924cb..db9e36ebe932 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb @@ -42,10 +43,12 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb @@ -55,6 +58,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r4.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-mnt-reform2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts index dd764b720fb0..f6a79c8080d1 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts @@ -54,6 +54,7 @@ &mscc_felix_port0 { label = "swp0"; + managed = "in-band-status"; phy-handle = <&phy0>; phy-mode = "sgmii"; status = "okay"; @@ -61,6 +62,7 @@ &mscc_felix_port1 { label = "swp1"; + managed = "in-band-status"; phy-handle = <&phy1>; phy-mode = "sgmii"; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index b2e3e5d2a108..343ecf0e8973 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -66,7 +66,7 @@ }; }; - sysclk: clock-sysclk { + sysclk: sysclk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <100000000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts index db3d303093f6..6d22efbd645c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts @@ -83,15 +83,9 @@ }; eeprom@52 { - compatible = "atmel,24c512"; + compatible = "onnn,cat24c04", "atmel,24c04"; reg = <0x52>; }; - - eeprom@53 { - compatible = "atmel,24c512"; - reg = <0x53>; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index 60acdf0b689e..7025aad8ae89 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -59,14 +59,9 @@ }; eeprom@52 { - compatible = "atmel,24c512"; + compatible = "onnn,cat24c05", "atmel,24c04"; reg = <0x52>; }; - - eeprom@53 { - compatible = "atmel,24c512"; - reg = <0x53>; - }; }; &i2c3 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index bf7b43ab1293..1bfbce69cc8b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -83,34 +83,42 @@ status = "okay"; mdio1_phy5: ethernet-phy@c { + interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; reg = <0xc>; }; mdio1_phy6: ethernet-phy@d { + interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; reg = <0xd>; }; mdio1_phy7: ethernet-phy@e { + interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; reg = <0xe>; }; mdio1_phy8: ethernet-phy@f { + interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; reg = <0xf>; }; mdio1_phy1: ethernet-phy@1c { + interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; reg = <0x1c>; }; mdio1_phy2: ethernet-phy@1d { + interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; reg = <0x1d>; }; mdio1_phy3: ethernet-phy@1e { + interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; reg = <0x1e>; }; mdio1_phy4: ethernet-phy@1f { + interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; reg = <0x1f>; }; }; @@ -120,6 +128,7 @@ mdio2_aquantia_phy: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c45"; + interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>; reg = <0x0>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts new file mode 100644 index 000000000000..3063851c2fb9 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts @@ -0,0 +1,389 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Travese Ten64 (LS1088) board + * Based on fsl-ls1088a-rdb.dts + * Copyright 2017-2020 NXP + * Copyright 2019-2021 Traverse Technologies + * + * Author: Mathew McBride <matt@traverse.com.au> + */ + +/dts-v1/; + +#include "fsl-ls1088a.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Traverse Ten64"; + compatible = "traverse,ten64", "fsl,ls1088a"; + + aliases { + serial0 = &duart0; + serial1 = &duart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + buttons { + compatible = "gpio-keys"; + + /* Fired by system controller when + * external power off (e.g ATX Power Button) + * asserted + */ + powerdn { + label = "External Power Down"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + interrupts = <&gpio1 17 IRQ_TYPE_EDGE_FALLING>; + linux,code = <KEY_POWER>; + }; + + /* Rear Panel 'ADMIN' button (GPIO_H) */ + admin { + label = "ADMIN button"; + gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; + interrupts = <&gpio3 8 IRQ_TYPE_EDGE_RISING>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + leds { + compatible = "gpio-leds"; + + sfp1down { + label = "ten64:green:sfp1:down"; + gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; + }; + + sfp2up { + label = "ten64:green:sfp2:up"; + gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; + }; + + admin { + label = "ten64:admin"; + gpios = <&sfpgpio 12 GPIO_ACTIVE_HIGH>; + }; + }; + + sfp_xg0: dpmac2-sfp { + compatible = "sff,sfp"; + i2c-bus = <&sfplower_i2c>; + tx-fault-gpios = <&sfpgpio 0 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&sfpgpio 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sfpgpio 2 GPIO_ACTIVE_LOW>; + los-gpios = <&sfpgpio 3 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <2000>; + }; + + sfp_xg1: dpmac1-sfp { + compatible = "sff,sfp"; + i2c-bus = <&sfpupper_i2c>; + tx-fault-gpios = <&sfpgpio 4 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&sfpgpio 5 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sfpgpio 6 GPIO_ACTIVE_LOW>; + los-gpios = <&sfpgpio 7 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <2000>; + }; +}; + +/* XG1 - Upper SFP */ +&dpmac1 { + sfp = <&sfp_xg1>; + pcs-handle = <&pcs1>; + phy-connection-type = "10gbase-r"; + managed = "in-band-status"; +}; + +/* XG0 - Lower SFP */ +&dpmac2 { + sfp = <&sfp_xg0>; + pcs-handle = <&pcs2>; + phy-connection-type = "10gbase-r"; + managed = "in-band-status"; +}; + +/* DPMAC3..6 is GE4 to GE8 */ +&dpmac3 { + phy-handle = <&mdio1_phy5>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs3_0>; +}; + +&dpmac4 { + phy-handle = <&mdio1_phy6>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs3_1>; +}; + +&dpmac5 { + phy-handle = <&mdio1_phy7>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs3_2>; +}; + +&dpmac6 { + phy-handle = <&mdio1_phy8>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs3_3>; +}; + +/* DPMAC7..10 is GE0 to GE3 */ +&dpmac7 { + phy-handle = <&mdio1_phy1>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs7_0>; +}; + +&dpmac8 { + phy-handle = <&mdio1_phy2>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs7_1>; +}; + +&dpmac9 { + phy-handle = <&mdio1_phy3>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs7_2>; +}; + +&dpmac10 { + phy-handle = <&mdio1_phy4>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs7_3>; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&emdio1 { + status = "okay"; + + mdio1_phy5: ethernet-phy@c { + reg = <0xc>; + }; + + mdio1_phy6: ethernet-phy@d { + reg = <0xd>; + }; + + mdio1_phy7: ethernet-phy@e { + reg = <0xe>; + }; + + mdio1_phy8: ethernet-phy@f { + reg = <0xf>; + }; + + mdio1_phy1: ethernet-phy@1c { + reg = <0x1c>; + }; + + mdio1_phy2: ethernet-phy@1d { + reg = <0x1d>; + }; + + mdio1_phy3: ethernet-phy@1e { + reg = <0x1e>; + }; + + mdio1_phy4: ethernet-phy@1f { + reg = <0x1f>; + }; +}; + +&esdhc { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + sfpgpio: gpio@76 { + compatible = "ti,tca9539"; + reg = <0x76>; + #gpio-cells = <2>; + gpio-controller; + + admin_led_lower { + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; + output-low; + }; + }; + + at97sc: tpm@29 { + compatible = "atmel,at97sc3204t"; + reg = <0x29>; + }; +}; + +&i2c2 { + status = "okay"; + + rx8035: rtc@32 { + compatible = "epson,rx8035"; + reg = <0x32>; + }; +}; + +&i2c3 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9540"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + sfpupper_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + sfplower_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; +}; + +&pcs_mdio1 { + status = "okay"; +}; + +&pcs_mdio2 { + status = "okay"; +}; + +&pcs_mdio3 { + status = "okay"; +}; + +&pcs_mdio7 { + status = "okay"; +}; + +&qspi { + status = "okay"; + + en25s64: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0 0x100000>; + }; + + partition@100000 { + label = "bl3"; + reg = <0x100000 0x200000>; + }; + + partition@300000 { + label = "mcfirmware"; + reg = <0x300000 0x200000>; + }; + + partition@500000 { + label = "ubootenv"; + reg = <0x500000 0x80000>; + }; + + partition@580000 { + label = "dpl"; + reg = <0x580000 0x40000>; + }; + + partition@5C0000 { + label = "dpc"; + reg = <0x5C0000 0x40000>; + }; + + partition@600000 { + label = "devicetree"; + reg = <0x600000 0x40000>; + }; + }; + }; + + nand: flash@1 { + compatible = "spi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1>; + spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* reserved for future boot direct from NAND flash + * (this would use the same layout as the 8MiB NOR flash) + */ + partition@0 { + label = "nand-boot-reserved"; + reg = <0 0x800000>; + }; + + /* recovery / install environment */ + partition@800000 { + label = "recovery"; + reg = <0x800000 0x2000000>; + }; + + /* ubia (first OpenWrt) - a/b names to prevent confusion with ubi0/1/etc. */ + partition@2800000 { + label = "ubia"; + reg = <0x2800000 0x6C00000>; + }; + + /* ubib (second OpenWrt) */ + partition@9400000 { + label = "ubib"; + reg = <0x9400000 0x6C00000>; + }; + }; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 2fa6cfbef01f..f85e437f80b7 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -189,6 +189,11 @@ <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */ }; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -765,6 +770,19 @@ status = "disabled"; }; + pcs_mdio1: mdio@8c07000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c07000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs1: ethernet-phy@0 { + reg = <0>; + }; + }; + pcs_mdio2: mdio@8c0b000 { compatible = "fsl,fman-memac-mdio"; reg = <0x0 0x8c0b000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts index 60563917be44..3e4e857db13f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts @@ -92,21 +92,25 @@ mdio2_phy1: ethernet-phy@0 { compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45"; + interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; reg = <0x0>; }; mdio2_phy2: ethernet-phy@1 { compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45"; + interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>; reg = <0x1>; }; mdio2_phy3: ethernet-phy@2 { compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45"; + interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>; reg = <0x2>; }; mdio2_phy4: ethernet-phy@3 { compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45"; + interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>; reg = <0x3>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts index 5dbf27493e8b..028ff8074b9d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts @@ -65,6 +65,7 @@ rgmii_phy1: ethernet-phy@1 { /* AR8035 PHY */ compatible = "ethernet-phy-id004d.d072"; + interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>; reg = <0x1>; eee-broken-1000t; }; @@ -72,6 +73,7 @@ rgmii_phy2: ethernet-phy@2 { /* AR8035 PHY */ compatible = "ethernet-phy-id004d.d072"; + interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>; reg = <0x2>; eee-broken-1000t; }; @@ -79,12 +81,14 @@ aquantia_phy1: ethernet-phy@4 { /* AQR107 PHY */ compatible = "ethernet-phy-ieee802.3-c45"; + interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>; reg = <0x4>; }; aquantia_phy2: ethernet-phy@5 { /* AQR107 PHY */ compatible = "ethernet-phy-ieee802.3-c45"; + interrupts-extended = <&extirq 3 IRQ_TYPE_LEVEL_LOW>; reg = <0x5>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi new file mode 100644 index 000000000000..a90654155a88 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2021 NXP + * Zhou Guoniu <guoniu.zhou@nxp.com> + */ +img_subsys: bus@58000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x58000000 0x0 0x58000000 0x1000000>; + + img_ipg_clk: clock-img-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + clock-output-names = "img_ipg_clk"; + }; + + jpegdec: jpegdec@58400000 { + reg = <0x58400000 0x00050000>; + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>, + <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>; + clock-names = "per", "ipg"; + assigned-clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>, + <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>; + assigned-clock-rates = <200000000>, <200000000>; + power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>, + <&pd IMX_SC_R_MJPEG_DEC_S0>, + <&pd IMX_SC_R_MJPEG_DEC_S1>, + <&pd IMX_SC_R_MJPEG_DEC_S2>, + <&pd IMX_SC_R_MJPEG_DEC_S3>; + }; + + jpegenc: jpegenc@58450000 { + reg = <0x58450000 0x00050000>; + interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>, + <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>; + clock-names = "per", "ipg"; + assigned-clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>, + <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>; + assigned-clock-rates = <200000000>, <200000000>; + power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>, + <&pd IMX_SC_R_MJPEG_ENC_S0>, + <&pd IMX_SC_R_MJPEG_ENC_S1>, + <&pd IMX_SC_R_MJPEG_ENC_S2>, + <&pd IMX_SC_R_MJPEG_ENC_S3>; + }; + + img_jpeg_dec_lpcg: clock-controller@585d0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x585d0000 0x10000>; + #clock-cells = <1>; + clocks = <&img_ipg_clk>, <&img_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, + <IMX_LPCG_CLK_4>; + clock-output-names = "img_jpeg_dec_lpcg_clk", + "img_jpeg_dec_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>; + }; + + img_jpeg_enc_lpcg: clock-controller@585f0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x585f0000 0x10000>; + #clock-cells = <1>; + clocks = <&img_ipg_clk>, <&img_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, + <IMX_LPCG_CLK_4>; + clock-output-names = "img_jpeg_enc_lpcg_clk", + "img_jpeg_enc_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi index c769fadbd008..00f86cada30d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi @@ -278,70 +278,86 @@ pmic@69 { compatible = "mps,mp5416"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pmic>; reg = <0x69>; regulators { + /* vdd_0p95: DRAM/GPU/VPU */ buck1 { - regulator-name = "vdd_0p95"; - regulator-min-microvolt = <805000>; + regulator-name = "buck1"; + regulator-min-microvolt = <800000>; regulator-max-microvolt = <1000000>; - regulator-max-microamp = <2500000>; + regulator-min-microamp = <3800000>; + regulator-max-microamp = <6800000>; regulator-boot-on; + regulator-always-on; }; + /* vdd_soc */ buck2 { - regulator-name = "vdd_soc"; - regulator-min-microvolt = <805000>; + regulator-name = "buck2"; + regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; - regulator-max-microamp = <1000000>; + regulator-min-microamp = <2200000>; + regulator-max-microamp = <5200000>; regulator-boot-on; + regulator-always-on; }; + /* vdd_arm */ buck3_reg: buck3 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <805000>; + regulator-name = "buck3"; + regulator-min-microvolt = <800000>; regulator-max-microvolt = <1000000>; - regulator-max-microamp = <2200000>; - regulator-boot-on; + regulator-min-microamp = <3800000>; + regulator-max-microamp = <6800000>; + regulator-always-on; }; + /* vdd_1p8 */ buck4 { - regulator-name = "vdd_1p8"; + regulator-name = "buck4"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-max-microamp = <500000>; + regulator-min-microamp = <2200000>; + regulator-max-microamp = <5200000>; regulator-boot-on; + regulator-always-on; }; + /* nvcc_snvs_1p8 */ ldo1 { - regulator-name = "nvcc_snvs_1p8"; + regulator-name = "ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-max-microamp = <300000>; regulator-boot-on; + regulator-always-on; }; + /* vdd_snvs_0p8 */ ldo2 { - regulator-name = "vdd_snvs_0p8"; + regulator-name = "ldo2"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <800000>; regulator-boot-on; + regulator-always-on; }; + /* vdd_0p9 */ ldo3 { - regulator-name = "vdd_0p95"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; + regulator-name = "ldo3"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; regulator-boot-on; + regulator-always-on; }; + /* vdd_1p8 */ ldo4 { - regulator-name = "vdd_1p8"; + regulator-name = "ldo4"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; + regulator-always-on; }; }; }; @@ -426,12 +442,6 @@ >; }; - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 - >; - }; - pinctrl_uart2: uart2grp { fsl,pins = < MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi index 905b68a3daa5..8e4a0ce99790 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi @@ -46,7 +46,7 @@ pinctrl-0 = <&pinctrl_reg_usb1_en>; compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -156,7 +156,8 @@ pinctrl_reg_usb1_en: regusb1grp { fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x41 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x41 + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x141 MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index 5a1e9df39bec..bafd5c8ea4e2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -216,7 +216,7 @@ pinctrl-0 = <&pinctrl_reg_usb2>; compatible = "regulator-fixed"; regulator-name = "usb_usb2_vbus"; - gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -296,8 +296,6 @@ interrupts = <16 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; adc { compatible = "gw,gsc-adc"; @@ -824,8 +822,9 @@ pinctrl_reg_usb2: regusb1grp { fsl,pins = < - MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x41 - MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x41 + MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x41 + MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x140 + MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x140 >; }; @@ -876,9 +875,9 @@ pinctrl_uart3_gpio: uart3gpiogrp { fsl,pins = < - MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000041 /* RS232# */ - MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* RS422# */ - MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000041 /* RS485# */ + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000110 /* RS232# */ + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000110 /* RS422# */ + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000110 /* RS485# */ >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts new file mode 100644 index 000000000000..05cb60991fb9 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -0,0 +1,911 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2021 Gateworks Corporation + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> + +#include "imx8mm.dtsi" + +/ { + model = "Gateworks Venice GW7902 i.MX8MM board"; + compatible = "gw,imx8mm-gw7902", "fsl,imx8mm"; + + aliases { + usb0 = &usbotg1; + usb1 = &usbotg2; + }; + + chosen { + stdout-path = &uart2; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + can20m: can20m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + clock-output-names = "can20m"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + user-pb { + label = "user_pb"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key_erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + + led-controller { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "panel1"; + gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "panel2"; + gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-2 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "panel3"; + gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-3 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "panel4"; + gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-4 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "panel5"; + gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb1_vbus: regulator-usb1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1>; + regulator-name = "usb_usb1_vbus"; + gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_wl>; + regulator-name = "wifi"; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&can20m>; + oscillator-frequency = <20000000>; + interrupt-parent = <&gpio2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <10000000>; + }; +}; + +/* off-board header */ +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + local-mac-address = [00 00 00 00 00 00]; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + pinctrl-0 = <&pinctrl_gsc>; + interrupt-parent = <&gpio2>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <1>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vin"; + gw,voltage-divider-ohms = <22100 1000>; + gw,voltage-offset-microvolt = <700000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vin_4p0"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_0p9"; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_soc"; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_arm"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_1p8"; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_dram"; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_1p0"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_2p5"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + }; + + gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio3>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + rohm,reset-snvs-powered; + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; + + regulators { + /* vdd_soc: 0.805-0.900V (typ=0.8V) */ + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + /* vdd_arm: 0.805-1.0V (typ=0.9V) */ + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + /* vdd_0p9: 0.805-1.0V (typ=0.9V) */ + BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_3p3 */ + BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_1p8 */ + BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_dram */ + BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + /* nvcc_snvs_1p8 */ + LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_snvs_0p8 */ + LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdda_1p8 */ + LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + accelerometer@19 { + compatible = "st,lis2de12"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + reg = <0x19>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio1>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT1"; + }; +}; + +/* off-board header */ +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +/* off-board header */ +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +/* off-board header */ +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +/* RS232/RS485/RS422 selectable */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; + rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* RS232 console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* bluetooth HCI */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; + rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + shutdown-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; + }; +}; + +/* LTE Cat M1/NB1/EGPRS modem or GPS (loading option) */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + rts-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + vbus-supply = <®_usb1_vbus>; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +/* SDIO WiFi */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wifi>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */ + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x40000041 /* M2_RST# */ + MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */ + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */ + MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x40000041 /* AMP GPIO1 */ + MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x40000041 /* AMP GPIO2 */ + MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x40000041 /* AMP GPIO3 */ + MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x40000041 /* AMP_GPIO4 */ + MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 /* APP GPIO1 */ + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000041 /* APP GPIO2 */ + MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000041 /* UART2_EN# */ + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x40000041 /* MIPI_GPIO1 */ + MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x40000041 /* MIPI_GPIO2 */ + MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000041 /* MIPI_GPIO3/PWM2 */ + MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* MIPI_GPIO4/PWM3 */ + >; + }; + + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x159 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 /* RST# */ + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 /* IRQ# */ + MX8MM_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN 0x141 + MX8MM_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT 0x141 + >; + }; + + pinctrl_gsc: gscgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x40 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_gpio_leds: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19 + MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19 + MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19 + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19 + MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x41 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x141 /* PPS */ + >; + }; + + pinctrl_reg_wl: regwlgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 /* WLAN_WLON */ + >; + }; + + pinctrl_reg_usb1: regusb1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x41 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6 + MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + >; + }; + + pinctrl_spi1: spi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40 + MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3 0x140 /* CAN_IRQ# */ + >; + }; + + pinctrl_spi2: spi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40 /* SS0 */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x140 /* RTS */ + MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x140 /* CTS */ + >; + }; + + pinctrl_uart1_gpio: uart1gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x40000110 /* HALF */ + MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x40000110 /* TERM */ + MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x40000110 /* RS485 */ + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_uart3_gpio: uart3_gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 /* BT_EN# */ + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x140 /* CTS */ + MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1 0x140 /* RTS */ + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 + MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x140 /* CTS */ + MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x140 /* RTS */ + MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x140 /* DTR */ + MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x140 /* DSR */ + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x140 /* DCD */ + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x140 /* RI */ + MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x140 /* GNSS_PPS */ + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x141 /* GNSS_GASP */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index e7648c3b8390..2f632e8ca388 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -192,10 +192,9 @@ }; pmu { - compatible = "arm,armv8-pmuv3"; + compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; }; timer { @@ -241,6 +240,7 @@ }; usbphynop1: usbphynop1 { + #phy-cells = <0>; compatible = "usb-nop-xceiv"; clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; @@ -249,6 +249,7 @@ }; usbphynop2: usbphynop2 { + #phy-cells = <0>; compatible = "usb-nop-xceiv"; clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; @@ -920,7 +921,7 @@ }; fec1: ethernet@30be0000 { - compatible = "fsl,imx8mm-fec", "fsl,imx6sx-fec"; + compatible = "fsl,imx8mm-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec"; reg = <0x30be0000 0x10000>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, @@ -968,7 +969,7 @@ clock-names = "usb1_ctrl_root_clk"; assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; - fsl,usbphy = <&usbphynop1>; + phys = <&usbphynop1>; fsl,usbmisc = <&usbmisc1 0>; status = "disabled"; }; @@ -987,7 +988,7 @@ clock-names = "usb1_ctrl_root_clk"; assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; - fsl,usbphy = <&usbphynop2>; + phys = <&usbphynop2>; fsl,usbmisc = <&usbmisc2 0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts new file mode 100644 index 000000000000..e77db4996e58 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts @@ -0,0 +1,884 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2021 Gateworks Corporation + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> + +#include "imx8mn.dtsi" + +/ { + model = "Gateworks Venice GW7902 i.MX8MN board"; + compatible = "gw,imx8mn-gw7902", "fsl,imx8mn"; + + aliases { + usb0 = &usbotg1; + }; + + chosen { + stdout-path = &uart2; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + can20m: can20m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + clock-output-names = "can20m"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + user-pb { + label = "user_pb"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key_erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + + led-controller { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "panel1"; + gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "panel2"; + gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-2 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "panel3"; + gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-3 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "panel4"; + gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-4 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "panel5"; + gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb1_vbus: regulator-usb1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1>; + regulator-name = "usb_usb1_vbus"; + gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_wl>; + regulator-name = "wifi"; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&can20m>; + oscillator-frequency = <20000000>; + interrupt-parent = <&gpio2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <10000000>; + }; +}; + +/* off-board header */ +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + local-mac-address = [00 00 00 00 00 00]; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + pinctrl-0 = <&pinctrl_gsc>; + interrupt-parent = <&gpio2>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <1>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vin"; + gw,voltage-divider-ohms = <22100 1000>; + gw,voltage-offset-microvolt = <700000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vin_4p0"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_0p9"; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_soc"; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_arm"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_1p8"; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_dram"; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_1p0"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_2p5"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + }; + + gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio3>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + rohm,reset-snvs-powered; + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; + + regulators { + /* vdd_soc: 0.805-0.900V (typ=0.8V) */ + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + /* vdd_arm: 0.805-1.0V (typ=0.9V) */ + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + /* vdd_0p9: 0.805-1.0V (typ=0.9V) */ + BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_3p3 */ + BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_1p8 */ + BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_dram */ + BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + /* nvcc_snvs_1p8 */ + LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_snvs_0p8 */ + LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdda_1p8 */ + LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + accelerometer@19 { + compatible = "st,lis2de12"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + reg = <0x19>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio1>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT1"; + }; +}; + +/* off-board header */ +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +/* off-board header */ +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +/* off-board header */ +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MN_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +/* RS232/RS485/RS422 selectable */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; + status = "okay"; +}; + +/* RS232 console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* bluetooth HCI */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; + rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + shutdown-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; + }; +}; + +/* LTE Cat M1/NB1/EGPRS modem or GPS (loading option) */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + vbus-supply = <®_usb1_vbus>; + disable-over-current; + status = "okay"; +}; + +/* SDIO WiFi */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wifi>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */ + MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x40000041 /* M2_RST# */ + MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */ + MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */ + MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 /* APP GPIO1 */ + MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000041 /* APP GPIO2 */ + MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000041 /* UART2_EN# */ + MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x40000041 /* MIPI_GPIO1 */ + MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x40000041 /* MIPI_GPIO2 */ + MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000041 /* MIPI_GPIO3/PWM2 */ + MX8MN_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* MIPI_GPIO4/PWM3 */ + >; + }; + + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x159 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 /* RST# */ + MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 /* IRQ# */ + MX8MN_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN 0x141 + MX8MN_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT 0x141 + >; + }; + + pinctrl_gsc: gscgrp { + fsl,pins = < + MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6 0x40 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_gpio_leds: gpioledgrp { + fsl,pins = < + MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19 + MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19 + MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19 + MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19 + MX8MN_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_DATA02_GPIO3_IO8 0x41 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX8MN_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x141 /* PPS */ + >; + }; + + pinctrl_reg_wl: regwlgrp { + fsl,pins = < + MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 /* WLAN_WLON */ + >; + }; + + pinctrl_reg_usb1: regusb1grp { + fsl,pins = < + MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7 0x41 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6 + MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + >; + }; + + pinctrl_spi1: spi1grp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40 + MX8MN_IOMUXC_SD1_DATA1_GPIO2_IO3 0x140 /* CAN_IRQ# */ + >; + }; + + pinctrl_spi2: spi2grp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 + MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 + MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 + MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40 /* SS0 */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + >; + }; + + pinctrl_uart1_gpio: uart1gpiogrp { + fsl,pins = < + MX8MN_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x40000110 /* HALF */ + MX8MN_IOMUXC_SAI2_TXC_GPIO4_IO25 0x40000110 /* TERM */ + MX8MN_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x40000110 /* RS485 */ + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_uart3_gpio: uart3_gpiogrp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 /* BT_EN# */ + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0 0x140 /* CTS */ + MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1 0x140 /* RTS */ + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 + MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 + MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x141 /* GNSS_GASP */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index d4231e061403..da6c942fb7f9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -190,7 +190,6 @@ compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; }; psci { @@ -923,7 +922,7 @@ }; fec1: ethernet@30be0000 { - compatible = "fsl,imx8mn-fec", "fsl,imx6sx-fec"; + compatible = "fsl,imx8mn-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec"; reg = <0x30be0000 0x10000>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, @@ -971,7 +970,7 @@ clock-names = "usb1_ctrl_root_clk"; assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>; assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>; - fsl,usbphy = <&usbphynop1>; + phys = <&usbphynop1>; fsl,usbmisc = <&usbmisc1 0>; status = "disabled"; }; @@ -1039,6 +1038,7 @@ }; usbphynop1: usbphynop1 { + #phy-cells = <0>; compatible = "usb-nop-xceiv"; clocks = <&clk IMX8MN_CLK_USB_PHY_REF>; assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 9f7c7f587d38..9b07b26230a1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -135,11 +135,21 @@ clock-output-names = "clk_ext4"; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dsp_reserved: dsp@92400000 { + reg = <0 0x92400000 0 0x2000000>; + no-map; + }; + }; + pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; }; psci { @@ -579,7 +589,7 @@ }; flexcan1: can@308c0000 { - compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan"; + compatible = "fsl,imx8mp-flexcan"; reg = <0x308c0000 0x10000>; interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MP_CLK_IPG_ROOT>, @@ -594,7 +604,7 @@ }; flexcan2: can@308d0000 { - compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan"; + compatible = "fsl,imx8mp-flexcan"; reg = <0x308d0000 0x10000>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MP_CLK_IPG_ROOT>, @@ -698,6 +708,14 @@ #mbox-cells = <2>; }; + mu2: mailbox@30e60000 { + compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu"; + reg = <0x30e60000 0x10000>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + i2c5: i2c@30ad0000 { compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c"; #address-cells = <1>; @@ -821,9 +839,9 @@ eqos: ethernet@30bf0000 { compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a"; reg = <0x30bf0000 0x10000>; - interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "eth_wake_irq", "macirq"; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>, <&clk IMX8MP_CLK_QOS_ENET_ROOT>, <&clk IMX8MP_CLK_ENET_QOS_TIMER>, @@ -938,5 +956,16 @@ snps,dis-u2-freeclk-exists-quirk; }; }; + + dsp: dsp@3b6e8000 { + compatible = "fsl,imx8mp-dsp"; + reg = <0x3b6e8000 0x88000>; + mbox-names = "txdb0", "txdb1", + "rxdb0", "rxdb1"; + mboxes = <&mu2 2 0>, <&mu2 2 1>, + <&mu2 3 0>, <&mu2 3 1>; + memory-region = <&dsp_reserved>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 4d2035e3dd7c..49f9db971f3b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -403,9 +403,9 @@ assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; vmmc-supply = <®_usdhc2_vmmc>; status = "okay"; @@ -423,7 +423,6 @@ fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x19 >; - }; pinctrl_fec1: fec1grp { @@ -480,7 +479,6 @@ MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 - >; }; @@ -565,6 +563,12 @@ >; }; + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 + >; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts new file mode 100644 index 000000000000..2535268f0984 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/* + * Copyright 2019-2021 MNT Research GmbH + * Copyright 2021 Lucas Stach <dev@lynxeye.de> + */ + +/dts-v1/; + +#include "imx8mq-nitrogen-som.dtsi" + +/ { + model = "MNT Reform 2"; + compatible = "mntre,reform2", "boundary,imx8mq-nitrogen8m-som", "fsl,imx8mq"; + + pcie1_refclk: clock-pcie1-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + reg_main_5v: regulator-main-5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_main_3v3: regulator-main-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_main_usb: regulator-main-usb { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_main_5v>; + }; + + sound { + compatible = "fsl,imx-audio-wm8960"; + audio-cpu = <&sai2>; + audio-codec = <&wm8960>; + audio-routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "LINPUT1", "Mic Jack", + "Mic Jack", "MICB", + "LINPUT2", "Line In Jack", + "RINPUT2", "Line In Jack"; + model = "wm8960-audio"; + }; +}; + +&fec1 { + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + wm8960: codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; + + rtc@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; +}; + +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie1>; + reset-gpio = <&gpio3 23 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, + <&clk IMX8MQ_CLK_PCIE2_AUX>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&pcie1_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + status = "okay"; +}; + +®_1p8v { + vin-supply = <®_main_5v>; +}; + +®_snvs { + vin-supply = <®_main_5v>; +}; + +®_arm_dram { + vin-supply = <®_main_5v>; +}; + +®_dram_1p1v { + vin-supply = <®_main_5v>; +}; + +®_soc_gpu_vpu { + vin-supply = <®_main_5v>; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; + assigned-clock-rates = <25000000>; + fsl,sai-mclk-direction-output; + fsl,sai-asynchronous; + status = "okay"; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usb3_phy0 { + vbus-supply = <®_main_usb>; + status = "okay"; +}; + +&usb3_phy1 { + vbus-supply = <®_main_usb>; + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "host"; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vqmmc-supply = <®_main_3v3>; + vmmc-supply = <®_main_3v3>; + bus-width = <4>; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f + >; + }; + + pinctrl_pcie1: pcie1grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x16 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 + MX8MQ_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI2_RXC_SAI2_RX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 + MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x45 + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x45 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen-som.dtsi new file mode 100644 index 000000000000..36fc428ebe30 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen-som.dtsi @@ -0,0 +1,275 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 Boundary Devices + * Copyright 2021 Lucas Stach <dev@lynxeye.de> + */ + +#include "imx8mq.dtsi" + +/ { + model = "Boundary Devices i.MX8MQ Nitrogen8M"; + compatible = "boundary,imx8mq-nitrogen8m-som", "fsl,imx8mq"; + + chosen { + stdout-path = &uart1; + }; + + reg_1p8v: regulator-fixed-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_snvs: regulator-fixed-snvs { + compatible = "regulator-fixed"; + regulator-name = "VDD_SNVS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&{/opp-table/opp-800000000} { + opp-microvolt = <1000000>; +}; + +&{/opp-table/opp-1000000000} { + opp-microvolt = <1000000>; +}; + +&A53_0 { + cpu-supply = <®_arm_dram>; +}; + +&A53_1 { + cpu-supply = <®_arm_dram>; +}; + +&A53_2 { + cpu-supply = <®_arm_dram>; +}; + +&A53_3 { + cpu-supply = <®_arm_dram>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + interrupt-parent = <&gpio1>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_pca9546>; + reg = <0x70>; + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + + i2c1a: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + reg_arm_dram: regulator@60 { + compatible = "fcs,fan53555"; + reg = <0x60>; + regulator-name = "VDD_ARM_DRAM_1V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + + i2c1b: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + reg_dram_1p1v: regulator@60 { + compatible = "fcs,fan53555"; + reg = <0x60>; + regulator-name = "NVCC_DRAM_1P1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + }; + + i2c1c: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + reg_soc_gpu_vpu: regulator@60 { + compatible = "fcs,fan53555"; + reg = <0x60>; + regulator-name = "VDD_SOC_GPU_VPU"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + }; + }; + + i2c1d: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&pgc_gpu { + power-supply = <®_soc_gpu_vpu>; +}; + +&pgc_vpu { + power-supply = <®_soc_gpu_vpu>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vqmmc-supply = <®_1p8v>; + vmmc-supply = <®_snvs>; + bus-width = <8>; + non-removable; + no-mmc-hs400; + no-sdio; + no-sd; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x59 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_i2c1_pca9546: i2c1-pca9546grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x49 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x45 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x45 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 91df9c5350ae..4066b1612655 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -193,7 +193,6 @@ compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; }; psci { @@ -1099,6 +1098,110 @@ status = "disabled"; }; + mipi_csi1: csi@30a70000 { + compatible = "fsl,imx8mq-mipi-csi2"; + reg = <0x30a70000 0x1000>; + clocks = <&clk IMX8MQ_CLK_CSI1_CORE>, + <&clk IMX8MQ_CLK_CSI1_ESC>, + <&clk IMX8MQ_CLK_CSI1_PHY_REF>; + clock-names = "core", "esc", "ui"; + assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>, + <&clk IMX8MQ_CLK_CSI1_PHY_REF>, + <&clk IMX8MQ_CLK_CSI1_ESC>; + assigned-clock-rates = <266000000>, <333000000>, <66000000>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>, + <&clk IMX8MQ_SYS2_PLL_1000M>, + <&clk IMX8MQ_SYS1_PLL_800M>; + power-domains = <&pgc_mipi_csi1>; + resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>, + <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>, + <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>; + fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>; + interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>; + interconnect-names = "dram"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi1_mipi_ep: endpoint { + remote-endpoint = <&csi1_ep>; + }; + }; + }; + }; + + csi1: csi@30a90000 { + compatible = "fsl,imx8mq-csi", "fsl,imx7-csi"; + reg = <0x30a90000 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_CSI1_ROOT>; + clock-names = "mclk"; + status = "disabled"; + + port { + csi1_ep: endpoint { + remote-endpoint = <&csi1_mipi_ep>; + }; + }; + }; + + mipi_csi2: csi@30b60000 { + compatible = "fsl,imx8mq-mipi-csi2"; + reg = <0x30b60000 0x1000>; + clocks = <&clk IMX8MQ_CLK_CSI2_CORE>, + <&clk IMX8MQ_CLK_CSI2_ESC>, + <&clk IMX8MQ_CLK_CSI2_PHY_REF>; + clock-names = "core", "esc", "ui"; + assigned-clocks = <&clk IMX8MQ_CLK_CSI2_CORE>, + <&clk IMX8MQ_CLK_CSI2_PHY_REF>, + <&clk IMX8MQ_CLK_CSI2_ESC>; + assigned-clock-rates = <266000000>, <333000000>, <66000000>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>, + <&clk IMX8MQ_SYS2_PLL_1000M>, + <&clk IMX8MQ_SYS1_PLL_800M>; + power-domains = <&pgc_mipi_csi2>; + resets = <&src IMX8MQ_RESET_MIPI_CSI2_CORE_RESET>, + <&src IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET>, + <&src IMX8MQ_RESET_MIPI_CSI2_ESC_RESET>; + fsl,mipi-phy-gpr = <&iomuxc_gpr 0xa4>; + interconnects = <&noc IMX8MQ_ICM_CSI2 &noc IMX8MQ_ICS_DRAM>; + interconnect-names = "dram"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi2_mipi_ep: endpoint { + remote-endpoint = <&csi2_ep>; + }; + }; + }; + }; + + csi2: csi@30b80000 { + compatible = "fsl,imx8mq-csi", "fsl,imx7-csi"; + reg = <0x30b80000 0x10000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_CSI2_ROOT>; + clock-names = "mclk"; + status = "disabled"; + + port { + csi2_ep: endpoint { + remote-endpoint = <&csi2_mipi_ep>; + }; + }; + }; + mu: mailbox@30aa0000 { compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu"; reg = <0x30aa0000 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi new file mode 100644 index 000000000000..7764b4146e0a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2021 NXP + */ + +&jpegdec { + compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgdec"; +}; + +&jpegenc { + compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgenc"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi index 12cd059b339b..aebbe2b84aa1 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi @@ -166,11 +166,13 @@ }; /* sorted in register address */ + #include "imx8-ss-img.dtsi" #include "imx8-ss-dma.dtsi" #include "imx8-ss-conn.dtsi" #include "imx8-ss-lsio.dtsi" }; +#include "imx8qm-ss-img.dtsi" #include "imx8qm-ss-dma.dtsi" #include "imx8qm-ss-conn.dtsi" #include "imx8qm-ss-lsio.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts index 47bb68823b24..7d00e17f0447 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts @@ -195,7 +195,7 @@ fsl,pins = < IMX8QXP_UART0_RX_ADMA_UART0_RX 0X06000020 IMX8QXP_UART0_TX_ADMA_UART0_TX 0X06000020 - IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 0x06000020 + IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 0x06000020 IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B 0x06000020 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi index f5f58959f65c..46da21af3702 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi @@ -17,9 +17,9 @@ }; &fec1 { - compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec"; + compatible = "fsl,imx8qxp-fec", "fsl,imx8qm-fec", "fsl,imx6sx-fec"; }; &fec2 { - compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec"; + compatible = "fsl,imx8qxp-fec", "fsl,imx8qm-fec", "fsl,imx6sx-fec"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi new file mode 100644 index 000000000000..3a087317591d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2021 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +&jpegdec { + compatible = "nxp,imx8qxp-jpgdec"; +}; + +&jpegenc { + compatible = "nxp,imx8qxp-jpgenc"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 1e6b4995091e..617618edf77e 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -141,7 +141,7 @@ }; pmu { - compatible = "arm,armv8-pmuv3"; + compatible = "arm,cortex-a35-pmu"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; }; @@ -258,12 +258,14 @@ }; /* sorted in register address */ + #include "imx8-ss-img.dtsi" #include "imx8-ss-adma.dtsi" #include "imx8-ss-conn.dtsi" #include "imx8-ss-ddr.dtsi" #include "imx8-ss-lsio.dtsi" }; +#include "imx8qxp-ss-img.dtsi" #include "imx8qxp-ss-adma.dtsi" #include "imx8qxp-ss-conn.dtsi" #include "imx8qxp-ss-lsio.dtsi" diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index f1ec87c05842..2d5c1a348716 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -1002,7 +1002,7 @@ <0x0 0xf3f20000 0x0 0x40000>, <0x0 0xf5000000 0x0 0x2000>; reg-names = "dbi", "apb", "phy", "config"; - bus-range = <0x0 0x1>; + bus-range = <0x0 0xff>; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 34efe0fb6f37..c686a8dd3ca5 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -16,5 +16,10 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin-singleshot.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-puzzle-m801.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db-B.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9131-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9131-db-B.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db-B.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index ce2bcddf396f..04da07ae4420 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -19,6 +19,8 @@ aliases { spi0 = &spi0; ethernet1 = ð1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; }; chosen { @@ -119,6 +121,7 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; clock-frequency = <100000>; + /delete-property/ mrvl,i2c-fast-mode; status = "okay"; rtc@6f { @@ -132,6 +135,23 @@ pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; status = "okay"; reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; + /* + * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property + * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and + * 2 size cells and also expects that the second range starts at 16 MB offset. If these + * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address + * space is 128 MB long, so the best split between MEM and IO is to use fixed 16 MB window + * for IO and the rest 112 MB (64+32+16) for MEM, despite that maximal IO size is just 64 kB. + * This bug is not present in U-Boot ports for other Armada 3700 devices and is fixed in + * U-Boot version 2021.07. See relevant U-Boot commits (the last one contains fix): + * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089dfe580f5d7 + * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6df8ecd73bf + * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd99ba02ee33 + */ + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0xe8000000 0 0xe8000000 0 0x01000000 /* Port 0 IO */ + 0x82000000 0 0xe9000000 0 0xe9000000 0 0x07000000>; /* Port 0 MEM */ /* enabled by U-Boot if PCIe module is present */ status = "disabled"; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 5db81a416cd6..9acc5d2b5a00 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -489,8 +489,15 @@ #interrupt-cells = <1>; msi-parent = <&pcie0>; msi-controller; - ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x1000000 /* Port 0 MEM */ - 0x81000000 0 0xe9000000 0 0xe9000000 0 0x10000>; /* Port 0 IO*/ + /* + * The 128 MiB address range [0xe8000000-0xf0000000] is + * dedicated for PCIe and can be assigned to 8 windows + * with size a power of two. Use one 64 KiB window for + * IO at the end and the remaining seven windows + * (totaling 127 MiB) for MEM. + */ + ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x07f00000 /* Port 0 MEM */ + 0x81000000 0 0xefff0000 0 0xefff0000 0 0x00010000>; /* Port 0 IO */ interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc 0>, <0 0 0 2 &pcie_intc 1>, diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index 51f3e2907597..cd326fe224ce 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -282,7 +282,7 @@ &cp0_eth0 { status = "okay"; /* Network PHY */ - phy-mode = "10gbase-kr"; + phy-mode = "10gbase-r"; /* Generic PHY, providing serdes lanes */ phys = <&cp0_comphy2 0>; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts index 0ec0d5625818..8729c6467303 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -20,7 +20,7 @@ stdout-path = "serial0:115200n8"; }; - memory@00000000 { + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index e39e1efc95b6..f2e8e0df8865 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -195,7 +195,7 @@ &cp0_eth0 { status = "okay"; - phy-mode = "10gbase-kr"; + phy-mode = "10gbase-r"; fixed-link { speed = <10000>; @@ -348,7 +348,7 @@ &cp1_eth0 { status = "okay"; - phy-mode = "10gbase-kr"; + phy-mode = "10gbase-r"; fixed-link { speed = <10000>; diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb-A.dts b/arch/arm64/boot/dts/marvell/cn9130-crb-A.dts new file mode 100644 index 000000000000..a7b6dfba8af5 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-crb-A.dts @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Marvell International Ltd. + */ + +#include "cn9130-crb.dtsi" + +/ { + model = "Marvell Armada CN9130-CRB-A"; +}; + +&cp0_pcie0 { + status = "okay"; + num-lanes = <4>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy0 0 + &cp0_comphy1 0 + &cp0_comphy2 0 + &cp0_comphy3 0>; + iommu-map = + <0x0 &smmu 0x480 0x20>, + <0x100 &smmu 0x4a0 0x20>, + <0x200 &smmu 0x4c0 0x20>; + iommu-map-mask = <0x031f>; +}; + +&cp0_usb3_0 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy0>; + phy-names = "usb"; +}; + +&cp0_usb3_1 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy1>; + phy-names = "usb"; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts b/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts new file mode 100644 index 000000000000..0904cb0309ae --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Marvell International Ltd. + */ + +#include "cn9130-crb.dtsi" + +/ { + model = "Marvell Armada CN9130-CRB-B"; +}; + +&cp0_pcie0 { + status = "okay"; + num-lanes = <1>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy0 0>; + iommu-map = + <0x0 &smmu 0x480 0x20>, + <0x100 &smmu 0x4a0 0x20>, + <0x200 &smmu 0x4c0 0x20>; + iommu-map-mask = <0x031f>; +}; + +&cp0_sata0 { + status = "okay"; + sata-port@0 { + status = "okay"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy2 0>; + }; +}; + +&cp0_usb3_0 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy0>; + phy-names = "usb"; + phys = <&cp0_comphy1 0>; +}; + +&cp0_usb3_1 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy1>; + phy-names = "usb"; + phys = <&cp0_comphy3 1>; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi new file mode 100644 index 000000000000..505ae69289f6 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi @@ -0,0 +1,222 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Marvell International Ltd. + */ + +#include "cn9130.dtsi" /* include SoC device tree */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + i2c0 = &cp0_i2c0; + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ap0_reg_mmc_vccq: ap0_mmc_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "ap0_mmc_vccq"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&expander0 5 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + }; + + cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp0-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 8 GPIO_ACTIVE_HIGH>; + }; + + cp0_usb3_0_phy0: cp0_usb3_phy0 { + compatible = "usb-nop-xceiv"; + }; + + cp0_usb3_0_phy1: cp0_usb3_phy1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp0_reg_usb3_vbus1>; + }; + + cp0_reg_sd_vccq: cp0_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "cp0_sd_vccq"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&cp0_gpio2 18 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + }; + + cp0_reg_sd_vcc: cp0_sd_vcc@0 { + compatible = "regulator-fixed"; + regulator-name = "cp0_sd_vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; +}; + +&uart0 { + status = "okay"; +}; + +/* on-board eMMC U6 */ +&ap_sdhci0 { + pinctrl-names = "default"; + bus-width = <8>; + status = "okay"; + mmc-ddr-1_8v; + vqmmc-supply = <&ap0_reg_mmc_vccq>; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp0_i2c0_pins: cp0-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_i2c1_pins: cp0-i2c-pins-1 { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_sdhci_cd_pins_crb: cp0-sdhci-cd-pins-crb { + marvell,pins = "mpp55"; + marvell,function = "gpio"; + }; + cp0_sdhci_pins: cp0-sdhi-pins-0 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + cp0_spi0_pins: cp0-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + }; +}; + +&cp0_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + status = "okay"; + clock-frequency = <100000>; + expander0: mcp23x17@20 { + compatible = "microchip,mcp23017"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + status = "okay"; + }; +}; + +&cp0_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c1_pins>; + clock-frequency = <100000>; + status = "okay"; +}; + + +&cp0_sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins + &cp0_sdhci_cd_pins_crb>; + bus-width = <4>; + cd-gpios = <&cp0_gpio2 23 GPIO_ACTIVE_HIGH>; + vqmmc-supply = <&cp0_reg_sd_vccq>; + vmmc-supply = <&cp0_reg_sd_vcc>; + status = "okay"; +}; + +&cp0_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi0_pins>; + reg = <0x700680 0x50>, /* control */ + <0x2000000 0x1000000>; /* CS0 */ + status = "okay"; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + /* On-board MUX does not allow higher frequencies */ + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem"; + reg = <0x200000 0xe00000>; + }; + }; + }; +}; + +&cp0_mdio { + status = "okay"; + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&cp0_xmdio { + status = "okay"; + nbaset_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +&cp0_eth0 { + /* This port is connected to 88E6393X switch */ + status = "okay"; + phy-mode = "10gbase-r"; + managed = "in-band-status"; + phys = <&cp0_comphy4 0>; +}; + +&cp0_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +&cp0_eth2 { + /* This port uses "2500base-t" phy-mode */ + status = "disabled"; + phy = <&nbaset_phy0>; + phys = <&cp0_comphy5 2>; +}; + diff --git a/arch/arm64/boot/dts/marvell/cn9130-db-B.dts b/arch/arm64/boot/dts/marvell/cn9130-db-B.dts new file mode 100644 index 000000000000..57e41cacd483 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-db-B.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Marvell International Ltd. + * + * Device tree for the CN9130-DB board (setup "B"). + */ + +#include "cn9130-db.dtsi" + +/ { + model = "Marvell Armada CN9130-DB setup B"; +}; + +/* Setup B has NAND flash as a boot device, while regular setup uses SPI flash. + * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated + * simultaneously. When NAND controller is enabled, SPI1 should be disabled. + */ + +&cp0_nand_controller { + status = "okay"; +}; + diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dts b/arch/arm64/boot/dts/marvell/cn9130-db.dts index 9758609541c7..994f347f2973 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-db.dts +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dts @@ -5,409 +5,18 @@ * Device tree for the CN9130-DB board. */ -#include "cn9130.dtsi" - -#include <dt-bindings/gpio/gpio.h> +#include "cn9130-db.dtsi" / { - model = "Marvell Armada CN9130-DB"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - gpio1 = &cp0_gpio1; - gpio2 = &cp0_gpio2; - i2c0 = &cp0_i2c0; - ethernet0 = &cp0_eth0; - ethernet1 = &cp0_eth1; - ethernet2 = &cp0_eth2; - spi1 = &cp0_spi0; - spi2 = &cp0_spi1; - }; - - memory@00000000 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - ap0_reg_sd_vccq: ap0_sd_vccq@0 { - compatible = "regulator-gpio"; - regulator-name = "ap0_sd_vccq"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - gpios = <&expander0 8 GPIO_ACTIVE_HIGH>; - states = <1800000 0x1 3300000 0x0>; - }; - - cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 { - compatible = "regulator-fixed"; - regulator-name = "cp0-xhci0-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; - }; - - cp0_usb3_0_phy0: cp0_usb3_phy@0 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp0_reg_usb3_vbus0>; - }; - - cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 { - compatible = "regulator-fixed"; - regulator-name = "cp0-xhci1-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; - }; - - cp0_usb3_0_phy1: cp0_usb3_phy@1 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp0_reg_usb3_vbus1>; - }; - - cp0_reg_sd_vccq: cp0_sd_vccq@0 { - compatible = "regulator-gpio"; - regulator-name = "cp0_sd_vccq"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - gpios = <&expander0 15 GPIO_ACTIVE_HIGH>; - states = <1800000 0x1 - 3300000 0x0>; - }; - - cp0_reg_sd_vcc: cp0_sd_vcc@0 { - compatible = "regulator-fixed"; - regulator-name = "cp0_sd_vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&expander0 14 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - cp0_sfp_eth0: sfp-eth@0 { - compatible = "sff,sfp"; - i2c-bus = <&cp0_sfpp0_i2c>; - los-gpio = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>; - /* - * SFP cages are unconnected on early PCBs because of an the I2C - * lanes not being connected. Prevent the port for being - * unusable by disabling the SFP node. - */ - status = "disabled"; - }; -}; - -&uart0 { - status = "okay"; -}; - -/* on-board eMMC - U9 */ -&ap_sdhci0 { - pinctrl-names = "default"; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - vqmmc-supply = <&ap0_reg_sd_vccq>; - status = "okay"; -}; - -&cp0_crypto { - status = "disabled"; -}; - -&cp0_ethernet { - status = "okay"; -}; - -/* SLM-1521-V2, CON9 */ -&cp0_eth0 { - status = "disabled"; - phy-mode = "10gbase-kr"; - /* Generic PHY, providing serdes lanes */ - phys = <&cp0_comphy4 0>; - managed = "in-band-status"; - sfp = <&cp0_sfp_eth0>; -}; - -/* CON56 */ -&cp0_eth1 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; -}; - -/* CON57 */ -&cp0_eth2 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; -}; - -&cp0_gpio1 { - status = "okay"; -}; - -&cp0_gpio2 { - status = "okay"; -}; - -&cp0_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_i2c0_pins>; - clock-frequency = <100000>; - - /* U36 */ - expander0: pca953x@21 { - compatible = "nxp,pca9555"; - pinctrl-names = "default"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x21>; - status = "okay"; - }; - - /* U42 */ - eeprom0: eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - pagesize = <0x20>; - }; - - /* U38 */ - eeprom1: eeprom@57 { - compatible = "atmel,24c64"; - reg = <0x57>; - pagesize = <0x20>; - }; -}; - -&cp0_i2c1 { - status = "okay"; - clock-frequency = <100000>; - - /* SLM-1521-V2 - U3 */ - i2c-mux@72 { /* verify address - depends on dpr */ - compatible = "nxp,pca9544"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72>; - cp0_sfpp0_i2c: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - /* U12 */ - cp0_module_expander1: pca9555@21 { - compatible = "nxp,pca9555"; - pinctrl-names = "default"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x21>; - }; - - }; - }; -}; - -&cp0_mdio { - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -/* U54 */ -&cp0_nand_controller { - pinctrl-names = "default"; - pinctrl-0 = <&nand_pins &nand_rb>; - - nand@0 { - reg = <0>; - label = "main-storage"; - nand-rb = <0>; - nand-ecc-mode = "hw"; - nand-on-flash-bbt; - nand-ecc-strength = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "U-Boot"; - reg = <0 0x200000>; - }; - partition@200000 { - label = "Linux"; - reg = <0x200000 0xe00000>; - }; - partition@1000000 { - label = "Filesystem"; - reg = <0x1000000 0x3f000000>; - }; - }; - }; -}; - -/* SLM-1521-V2, CON6 */ -&cp0_pcie0 { - status = "okay"; - num-lanes = <4>; - num-viewport = <8>; - /* Generic PHY, providing serdes lanes */ - phys = <&cp0_comphy0 0 - &cp0_comphy1 0 - &cp0_comphy2 0 - &cp0_comphy3 0>; -}; - -&cp0_sata0 { - status = "okay"; - - /* SLM-1521-V2, CON2 */ - sata-port@1 { - status = "okay"; - /* Generic PHY, providing serdes lanes */ - phys = <&cp0_comphy5 1>; - }; + model = "Marvell Armada CN9130-DB setup A"; }; -/* CON 28 */ -&cp0_sdhci0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_sdhci_pins - &cp0_sdhci_cd_pins>; - bus-width = <4>; - cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>; - no-1-8-v; - vqmmc-supply = <&cp0_reg_sd_vccq>; - vmmc-supply = <&cp0_reg_sd_vcc>; -}; +/* Setup A has SPI1 flash as a boot device, while setup B uses NAND flash. + * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated + * simultaneously. When SPI controller is enabled, NAND should be disabled. + */ -/* U55 */ &cp0_spi1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_spi0_pins>; - reg = <0x700680 0x50>; - - spi-flash@0 { - #address-cells = <0x1>; - #size-cells = <0x1>; - compatible = "jedec,spi-nor"; - reg = <0x0>; - /* On-board MUX does not allow higher frequencies */ - spi-max-frequency = <40000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "U-Boot-0"; - reg = <0x0 0x200000>; - }; - - partition@400000 { - label = "Filesystem-0"; - reg = <0x200000 0xe00000>; - }; - }; - }; }; -&cp0_syscon0 { - cp0_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - - cp0_i2c0_pins: cp0-i2c-pins-0 { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - cp0_i2c1_pins: cp0-i2c-pins-1 { - marvell,pins = "mpp35", "mpp36"; - marvell,function = "i2c1"; - }; - cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 { - marvell,pins = "mpp0", "mpp1", "mpp2", - "mpp3", "mpp4", "mpp5", - "mpp6", "mpp7", "mpp8", - "mpp9", "mpp10", "mpp11"; - marvell,function = "ge0"; - }; - cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 { - marvell,pins = "mpp44", "mpp45", "mpp46", - "mpp47", "mpp48", "mpp49", - "mpp50", "mpp51", "mpp52", - "mpp53", "mpp54", "mpp55"; - marvell,function = "ge1"; - }; - cp0_sdhci_cd_pins: cp0-sdhci-cd-pins-0 { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - cp0_sdhci_pins: cp0-sdhi-pins-0 { - marvell,pins = "mpp56", "mpp57", "mpp58", - "mpp59", "mpp60", "mpp61"; - marvell,function = "sdio"; - }; - cp0_spi0_pins: cp0-spi-pins-0 { - marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; - marvell,function = "spi1"; - }; - nand_pins: nand-pins { - marvell,pins = "mpp15", "mpp16", "mpp17", "mpp18", - "mpp19", "mpp20", "mpp21", "mpp22", - "mpp23", "mpp24", "mpp25", "mpp26", - "mpp27"; - marvell,function = "dev"; - }; - nand_rb: nand-rb { - marvell,pins = "mpp13"; - marvell,function = "nf"; - }; - }; -}; - -&cp0_utmi { - status = "okay"; -}; - -&cp0_usb3_0 { - status = "okay"; - usb-phy = <&cp0_usb3_0_phy0>; - phys = <&cp0_utmi0>; - phy-names = "utmi"; - dr_mode = "host"; -}; - -&cp0_usb3_1 { - status = "okay"; - usb-phy = <&cp0_usb3_0_phy1>; - phys = <&cp0_utmi1>; - phy-names = "utmi"; - dr_mode = "host"; -}; diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi new file mode 100644 index 000000000000..c00b69b88bd2 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi @@ -0,0 +1,410 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9130-DB board. + */ + +#include "cn9130.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; + i2c0 = &cp0_i2c0; + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + spi1 = &cp0_spi0; + spi2 = &cp0_spi1; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ap0_reg_sd_vccq: ap0_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "ap0_sd_vccq"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&expander0 8 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 3300000 0x0>; + }; + + cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "cp0-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; + }; + + cp0_usb3_0_phy0: cp0_usb3_phy@0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp0_reg_usb3_vbus0>; + }; + + cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp0-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; + }; + + cp0_usb3_0_phy1: cp0_usb3_phy@1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp0_reg_usb3_vbus1>; + }; + + cp0_reg_sd_vccq: cp0_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "cp0_sd_vccq"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&expander0 15 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + }; + + cp0_reg_sd_vcc: cp0_sd_vcc@0 { + compatible = "regulator-fixed"; + regulator-name = "cp0_sd_vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&expander0 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + cp0_sfp_eth0: sfp-eth@0 { + compatible = "sff,sfp"; + i2c-bus = <&cp0_sfpp0_i2c>; + los-gpio = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +&uart0 { + status = "okay"; +}; + +/* on-board eMMC - U9 */ +&ap_sdhci0 { + pinctrl-names = "default"; + bus-width = <8>; + vqmmc-supply = <&ap0_reg_sd_vccq>; + status = "okay"; +}; + +&cp0_crypto { + status = "disabled"; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp0_eth0 { + status = "okay"; + phy-mode = "10gbase-r"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp0_sfp_eth0>; +}; + +/* CON56 */ +&cp0_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +/* CON57 */ +&cp0_eth2 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; +}; + +&cp0_gpio1 { + status = "okay"; +}; + +&cp0_gpio2 { + status = "okay"; +}; + +&cp0_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + clock-frequency = <100000>; + + /* U36 */ + expander0: pca953x@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + status = "okay"; + }; + + /* U42 */ + eeprom0: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <0x20>; + }; + + /* U38 */ + eeprom1: eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <0x20>; + }; +}; + +&cp0_i2c1 { + status = "okay"; + clock-frequency = <100000>; + + /* SLM-1521-V2 - U3 */ + i2c-mux@72 { /* verify address - depends on dpr */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + cp0_sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* U12 */ + cp0_module_expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + + }; + }; +}; + +&cp0_mdio { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +/* U54 */ +&cp0_nand_controller { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins &nand_rb>; + + nand@0 { + reg = <0>; + label = "main-storage"; + nand-rb = <0>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@200000 { + label = "Linux"; + reg = <0x200000 0xe00000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; +}; + +/* SLM-1521-V2, CON6 */ +&cp0_pcie0 { + status = "okay"; + num-lanes = <4>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy0 0 + &cp0_comphy1 0 + &cp0_comphy2 0 + &cp0_comphy3 0>; +}; + +&cp0_sata0 { + status = "okay"; + + /* SLM-1521-V2, CON2 */ + sata-port@1 { + status = "okay"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy5 1>; + }; +}; + +/* CON 28 */ +&cp0_sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins + &cp0_sdhci_cd_pins>; + bus-width = <4>; + cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>; + no-1-8-v; + vqmmc-supply = <&cp0_reg_sd_vccq>; + vmmc-supply = <&cp0_reg_sd_vcc>; +}; + +/* U55 */ +&cp0_spi1 { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi0_pins>; + reg = <0x700680 0x50>; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + /* On-board MUX does not allow higher frequencies */ + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot-0"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem-0"; + reg = <0x200000 0xe00000>; + }; + }; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp0_i2c0_pins: cp0-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_i2c1_pins: cp0-i2c-pins-1 { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 { + marvell,pins = "mpp0", "mpp1", "mpp2", + "mpp3", "mpp4", "mpp5", + "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 { + marvell,pins = "mpp44", "mpp45", "mpp46", + "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52", + "mpp53", "mpp54", "mpp55"; + marvell,function = "ge1"; + }; + cp0_sdhci_cd_pins: cp0-sdhci-cd-pins-0 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + cp0_sdhci_pins: cp0-sdhi-pins-0 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + cp0_spi0_pins: cp0-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + nand_pins: nand-pins { + marvell,pins = "mpp15", "mpp16", "mpp17", "mpp18", + "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27"; + marvell,function = "dev"; + }; + nand_rb: nand-rb { + marvell,pins = "mpp13"; + marvell,function = "nf"; + }; + }; +}; + +&cp0_utmi { + status = "okay"; +}; + +&cp0_usb3_0 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy0>; + phys = <&cp0_utmi0>; + phy-names = "utmi"; + dr_mode = "host"; +}; + +&cp0_usb3_1 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy1>; + phys = <&cp0_utmi1>; + phy-names = "utmi"; + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9131-db-B.dts b/arch/arm64/boot/dts/marvell/cn9131-db-B.dts new file mode 100644 index 000000000000..183b1ec8b1f0 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9131-db-B.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Marvell International Ltd. + * + * Device tree for the CN9131-DB board (setup "B"). + */ + +#include "cn9131-db.dtsi" + +/ { + model = "Marvell Armada CN9131-DB setup B"; +}; + +/* Setup B has NAND flash as a boot device, while regular setup uses SPI flash. + * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated + * simultaneously. When NAND controller is enabled, SPI1 should be disabled. + */ + +&cp0_nand_controller { + status = "okay"; +}; + diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dts b/arch/arm64/boot/dts/marvell/cn9131-db.dts index ba2d4e1da159..a60fdee79bf8 100644 --- a/arch/arm64/boot/dts/marvell/cn9131-db.dts +++ b/arch/arm64/boot/dts/marvell/cn9131-db.dts @@ -5,203 +5,18 @@ * Device tree for the CN9131-DB board. */ -#include "cn9130-db.dts" +#include "cn9131-db.dtsi" / { - model = "Marvell Armada CN9131-DB"; - compatible = "marvell,cn9131", "marvell,cn9130", - "marvell,armada-ap807-quad", "marvell,armada-ap807"; - - aliases { - gpio3 = &cp1_gpio1; - gpio4 = &cp1_gpio2; - ethernet3 = &cp1_eth0; - ethernet4 = &cp1_eth1; - }; - - cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&cp1_xhci0_vbus_pins>; - regulator-name = "cp1-xhci0-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>; - }; - - cp1_usb3_0_phy0: cp1_usb3_phy0 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp1_reg_usb3_vbus0>; - }; - - cp1_sfp_eth1: sfp-eth1 { - compatible = "sff,sfp"; - i2c-bus = <&cp1_i2c0>; - los-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&cp1_sfp_pins>; - /* - * SFP cages are unconnected on early PCBs because of an the I2C - * lanes not being connected. Prevent the port for being - * unusable by disabling the SFP node. - */ - status = "disabled"; - }; + model = "Marvell Armada CN9131-DB setup A"; }; -/* - * Instantiate the first slave CP115 +/* Setup A has SPI1 flash as a boot device, while setup B uses NAND flash. + * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated + * simultaneously. When SPI controller is enabled, NAND should be disabled. */ -#define CP11X_NAME cp1 -#define CP11X_BASE f4000000 -#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) -#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 -#define CP11X_PCIE0_BASE f4600000 -#define CP11X_PCIE1_BASE f4620000 -#define CP11X_PCIE2_BASE f4640000 - -#include "armada-cp115.dtsi" - -#undef CP11X_NAME -#undef CP11X_BASE -#undef CP11X_PCIEx_MEM_BASE -#undef CP11X_PCIEx_MEM_SIZE -#undef CP11X_PCIE0_BASE -#undef CP11X_PCIE1_BASE -#undef CP11X_PCIE2_BASE - -&cp1_crypto { - status = "disabled"; -}; - -&cp1_ethernet { - status = "okay"; -}; - -/* CON50 */ -&cp1_eth0 { - status = "disabled"; - phy-mode = "10gbase-kr"; - /* Generic PHY, providing serdes lanes */ - phys = <&cp1_comphy4 0>; - managed = "in-band-status"; - sfp = <&cp1_sfp_eth1>; -}; - -&cp1_gpio1 { - status = "okay"; -}; - -&cp1_gpio2 { - status = "okay"; -}; - -&cp1_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp1_i2c0_pins>; - clock-frequency = <100000>; -}; - -/* CON40 */ -&cp1_pcie0 { - pinctrl-names = "default"; - pinctrl-0 = <&cp1_pcie_reset_pins>; - num-lanes = <2>; - num-viewport = <8>; - marvell,reset-gpio = <&cp1_gpio1 0 GPIO_ACTIVE_HIGH>; - status = "okay"; - /* Generic PHY, providing serdes lanes */ - phys = <&cp1_comphy0 0 - &cp1_comphy1 0>; -}; - -&cp1_sata0 { - status = "okay"; - - /* CON32 */ - sata-port@1 { - /* Generic PHY, providing serdes lanes */ - phys = <&cp1_comphy5 1>; - }; -}; - -/* U24 */ -&cp1_spi1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp1_spi0_pins>; - reg = <0x700680 0x50>; - - spi-flash@0 { - #address-cells = <0x1>; - #size-cells = <0x1>; - compatible = "jedec,spi-nor"; - reg = <0x0>; - /* On-board MUX does not allow higher frequencies */ - spi-max-frequency = <40000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "U-Boot-1"; - reg = <0x0 0x200000>; - }; - - partition@400000 { - label = "Filesystem-1"; - reg = <0x200000 0xe00000>; - }; - }; - }; - -}; - -&cp1_syscon0 { - cp1_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - - cp1_i2c0_pins: cp1-i2c-pins-0 { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - cp1_spi0_pins: cp1-spi-pins-0 { - marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; - marvell,function = "spi1"; - }; - cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins { - marvell,pins = "mpp3"; - marvell,function = "gpio"; - }; - cp1_sfp_pins: sfp-pins { - marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11"; - marvell,function = "gpio"; - }; - cp1_pcie_reset_pins: cp1-pcie-reset-pins { - marvell,pins = "mpp0"; - marvell,function = "gpio"; - }; - }; -}; - -/* CON58 */ -&cp1_utmi { +&cp0_spi1 { status = "okay"; }; -&cp1_usb3_1 { - status = "okay"; - usb-phy = <&cp1_usb3_0_phy0>; - /* Generic PHY, providing serdes lanes */ - phys = <&cp1_comphy3 1>, <&cp1_utmi1>; - phy-names = "usb", "utmi"; - dr_mode = "host"; -}; diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi new file mode 100644 index 000000000000..f995b1bcda01 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi @@ -0,0 +1,206 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Marvell International Ltd. + * + * Device tree for the CN9131-DB board. + */ + +#include "cn9130-db.dtsi" + +/ { + compatible = "marvell,cn9131", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + aliases { + gpio3 = &cp1_gpio1; + gpio4 = &cp1_gpio2; + ethernet3 = &cp1_eth0; + ethernet4 = &cp1_eth1; + }; + + cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_xhci0_vbus_pins>; + regulator-name = "cp1-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + cp1_usb3_0_phy0: cp1_usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp1_reg_usb3_vbus0>; + }; + + cp1_sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + i2c-bus = <&cp1_i2c0>; + los-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfp_pins>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +/* + * Instantiate the first slave CP115 + */ + +#define CP11X_NAME cp1 +#define CP11X_BASE f4000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f4600000 +#define CP11X_PCIE1_BASE f4620000 +#define CP11X_PCIE2_BASE f4640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp1_crypto { + status = "disabled"; +}; + +&cp1_ethernet { + status = "okay"; +}; + +/* CON50 */ +&cp1_eth0 { + status = "okay"; + phy-mode = "10gbase-r"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp1_sfp_eth1>; +}; + +&cp1_gpio1 { + status = "okay"; +}; + +&cp1_gpio2 { + status = "okay"; +}; + +&cp1_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_i2c0_pins>; + clock-frequency = <100000>; +}; + +/* CON40 */ +&cp1_pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_pcie_reset_pins>; + num-lanes = <2>; + num-viewport = <8>; + marvell,reset-gpio = <&cp1_gpio1 0 GPIO_ACTIVE_HIGH>; + status = "okay"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy0 0 + &cp1_comphy1 0>; +}; + +&cp1_sata0 { + status = "okay"; + + /* CON32 */ + sata-port@1 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy5 1>; + }; +}; + +/* U24 */ +&cp1_spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_spi0_pins>; + reg = <0x700680 0x50>; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + /* On-board MUX does not allow higher frequencies */ + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot-1"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem-1"; + reg = <0x200000 0xe00000>; + }; + }; + }; + +}; + +&cp1_syscon0 { + cp1_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp1_i2c0_pins: cp1-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp1_spi0_pins: cp1-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + cp1_sfp_pins: sfp-pins { + marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11"; + marvell,function = "gpio"; + }; + cp1_pcie_reset_pins: cp1-pcie-reset-pins { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + }; +}; + +/* CON58 */ +&cp1_utmi { + status = "okay"; +}; + +&cp1_usb3_1 { + status = "okay"; + usb-phy = <&cp1_usb3_0_phy0>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy3 1>, <&cp1_utmi1>; + phy-names = "usb", "utmi"; + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9132-db-B.dts b/arch/arm64/boot/dts/marvell/cn9132-db-B.dts new file mode 100644 index 000000000000..7137a6f22d0f --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9132-db-B.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9132-DB board. + */ + +#include "cn9132-db.dtsi" + +/ { + model = "Marvell Armada CN9132-DB setup B"; +}; + +/* Setup B has NAND flash as a boot device, while regular setup uses SPI flash. + * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated + * simultaneously. When NAND controller is enabled, SPI1 should be disabled. + */ + +&cp0_nand_controller { + status = "okay"; +}; + diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dts b/arch/arm64/boot/dts/marvell/cn9132-db.dts index 81fba024b22d..1f2e6377afc3 100644 --- a/arch/arm64/boot/dts/marvell/cn9132-db.dts +++ b/arch/arm64/boot/dts/marvell/cn9132-db.dts @@ -5,224 +5,18 @@ * Device tree for the CN9132-DB board. */ -#include "cn9131-db.dts" +#include "cn9132-db.dtsi" / { - model = "Marvell Armada CN9132-DB"; - compatible = "marvell,cn9132", "marvell,cn9131", "marvell,cn9130", - "marvell,armada-ap807-quad", "marvell,armada-ap807"; - - aliases { - gpio5 = &cp2_gpio1; - gpio6 = &cp2_gpio2; - ethernet5 = &cp2_eth0; - }; - - cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 { - compatible = "regulator-fixed"; - regulator-name = "cp2-xhci0-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>; - }; - - cp2_usb3_0_phy0: cp2_usb3_phy0 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp2_reg_usb3_vbus0>; - }; - - cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 { - compatible = "regulator-fixed"; - regulator-name = "cp2-xhci1-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>; - }; - - cp2_usb3_0_phy1: cp2_usb3_phy1 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp2_reg_usb3_vbus1>; - }; - - cp2_reg_sd_vccq: cp2_sd_vccq@0 { - compatible = "regulator-gpio"; - regulator-name = "cp2_sd_vcc"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - gpios = <&cp2_gpio2 17 GPIO_ACTIVE_HIGH>; - states = <1800000 0x1 3300000 0x0>; - }; - - cp2_sfp_eth0: sfp-eth0 { - compatible = "sff,sfp"; - i2c-bus = <&cp2_sfpp0_i2c>; - los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>; - /* - * SFP cages are unconnected on early PCBs because of an the I2C - * lanes not being connected. Prevent the port for being - * unusable by disabling the SFP node. - */ - status = "disabled"; - }; + model = "Marvell Armada CN9132-DB setup A"; }; -/* - * Instantiate the second slave CP115 +/* Setup A has SPI1 flash as a boot device, while setup B uses NAND flash. + * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated + * simultaneously. When SPI controller is enabled, NAND should be disabled. */ -#define CP11X_NAME cp2 -#define CP11X_BASE f6000000 -#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000)) -#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 -#define CP11X_PCIE0_BASE f6600000 -#define CP11X_PCIE1_BASE f6620000 -#define CP11X_PCIE2_BASE f6640000 - -#include "armada-cp115.dtsi" - -#undef CP11X_NAME -#undef CP11X_BASE -#undef CP11X_PCIEx_MEM_BASE -#undef CP11X_PCIEx_MEM_SIZE -#undef CP11X_PCIE0_BASE -#undef CP11X_PCIE1_BASE -#undef CP11X_PCIE2_BASE - -&cp2_crypto { - status = "disabled"; -}; - -&cp2_ethernet { +&cp0_spi1 { status = "okay"; }; -/* SLM-1521-V2, CON9 */ -&cp2_eth0 { - status = "disabled"; - phy-mode = "10gbase-kr"; - /* Generic PHY, providing serdes lanes */ - phys = <&cp2_comphy4 0>; - managed = "in-band-status"; - sfp = <&cp2_sfp_eth0>; -}; - -&cp2_gpio1 { - status = "okay"; -}; - -&cp2_gpio2 { - status = "okay"; -}; - -&cp2_i2c0 { - clock-frequency = <100000>; - - /* SLM-1521-V2 - U3 */ - i2c-mux@72 { - compatible = "nxp,pca9544"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72>; - cp2_sfpp0_i2c: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - /* U12 */ - cp2_module_expander1: pca9555@21 { - compatible = "nxp,pca9555"; - pinctrl-names = "default"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x21>; - }; - }; - }; -}; - -/* SLM-1521-V2, CON6 */ -&cp2_pcie0 { - status = "okay"; - num-lanes = <2>; - num-viewport = <8>; - /* Generic PHY, providing serdes lanes */ - phys = <&cp2_comphy0 0 - &cp2_comphy1 0>; -}; - -/* SLM-1521-V2, CON8 */ -&cp2_pcie2 { - status = "okay"; - num-lanes = <1>; - num-viewport = <8>; - /* Generic PHY, providing serdes lanes */ - phys = <&cp2_comphy5 2>; -}; - -&cp2_sata0 { - status = "okay"; - - /* SLM-1521-V2, CON4 */ - sata-port@0 { - /* Generic PHY, providing serdes lanes */ - phys = <&cp2_comphy2 0>; - }; -}; - -/* CON 2 on SLM-1683 - microSD */ -&cp2_sdhci0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp2_sdhci_pins>; - bus-width = <4>; - cd-gpios = <&cp2_gpio2 23 GPIO_ACTIVE_LOW>; - vqmmc-supply = <&cp2_reg_sd_vccq>; -}; - -&cp2_syscon0 { - cp2_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - - cp2_i2c0_pins: cp2-i2c-pins-0 { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - cp2_sdhci_pins: cp2-sdhi-pins-0 { - marvell,pins = "mpp56", "mpp57", "mpp58", - "mpp59", "mpp60", "mpp61"; - marvell,function = "sdio"; - }; - }; -}; - -&cp2_utmi { - status = "okay"; -}; - -&cp2_usb3_0 { - status = "okay"; - usb-phy = <&cp2_usb3_0_phy0>; - phys = <&cp2_utmi0>; - phy-names = "usb"; - dr_mode = "host"; -}; - -/* SLM-1521-V2, CON11 */ -&cp2_usb3_1 { - status = "okay"; - usb-phy = <&cp2_usb3_0_phy1>; - /* Generic PHY, providing serdes lanes */ - phys = <&cp2_comphy3 1>, <&cp2_utmi1>; - phy-names = "usb", "utmi"; - dr_mode = "host"; -}; diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi new file mode 100644 index 000000000000..3f1795fb4fe7 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Marvell International Ltd. + * + * Device tree for the CN9132-DB board. + */ + +#include "cn9131-db.dtsi" + +/ { + compatible = "marvell,cn9132", "marvell,cn9131", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + aliases { + gpio5 = &cp2_gpio1; + gpio6 = &cp2_gpio2; + ethernet5 = &cp2_eth0; + }; + + cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy0: cp2_usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus0>; + }; + + cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy1: cp2_usb3_phy1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus1>; + }; + + cp2_reg_sd_vccq: cp2_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "cp2_sd_vcc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&cp2_gpio2 17 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 3300000 0x0>; + }; + + cp2_sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&cp2_sfpp0_i2c>; + los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +/* + * Instantiate the second slave CP115 + */ + +#define CP11X_NAME cp2 +#define CP11X_BASE f6000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f6600000 +#define CP11X_PCIE1_BASE f6620000 +#define CP11X_PCIE2_BASE f6640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp2_crypto { + status = "disabled"; +}; + +&cp2_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp2_eth0 { + status = "disabled"; + phy-mode = "10gbase-r"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp2_sfp_eth0>; +}; + +&cp2_gpio1 { + status = "okay"; +}; + +&cp2_gpio2 { + status = "okay"; +}; + +&cp2_i2c0 { + clock-frequency = <100000>; + + /* SLM-1521-V2 - U3 */ + i2c-mux@72 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + cp2_sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* U12 */ + cp2_module_expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + }; + }; +}; + +/* SLM-1521-V2, CON6 */ +&cp2_pcie0 { + status = "okay"; + num-lanes = <2>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy0 0 + &cp2_comphy1 0>; +}; + +/* SLM-1521-V2, CON8 */ +&cp2_pcie2 { + status = "okay"; + num-lanes = <1>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy5 2>; +}; + +&cp2_sata0 { + status = "okay"; + + /* SLM-1521-V2, CON4 */ + sata-port@0 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy2 0>; + }; +}; + +/* CON 2 on SLM-1683 - microSD */ +&cp2_sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp2_sdhci_pins>; + bus-width = <4>; + cd-gpios = <&cp2_gpio2 23 GPIO_ACTIVE_LOW>; + vqmmc-supply = <&cp2_reg_sd_vccq>; +}; + +&cp2_syscon0 { + cp2_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp2_i2c0_pins: cp2-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp2_sdhci_pins: cp2-sdhi-pins-0 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + }; +}; + +&cp2_utmi { + status = "okay"; +}; + +&cp2_usb3_0 { + status = "okay"; + usb-phy = <&cp2_usb3_0_phy0>; + phys = <&cp2_utmi0>; + phy-names = "usb"; + dr_mode = "host"; +}; + +/* SLM-1521-V2, CON11 */ +&cp2_usb3_1 { + status = "okay"; + usb-phy = <&cp2_usb3_0_phy1>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy3 1>, <&cp2_utmi1>; + phy-names = "usb", "utmi"; + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi index 21452c51a20a..e666ebb28980 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi @@ -10,6 +10,12 @@ #include "mt8173.dtsi" / { + aliases { + mmc0 = &mmc0; + mmc1 = &mmc1; + mmc2 = &mmc3; + }; + memory@40000000 { device_type = "memory"; reg = <0 0x40000000 0 0x80000000>; @@ -157,6 +163,10 @@ }; }; +&mfg_async { + domain-supply = <&da9211_vgpu_reg>; +}; + &cec { status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index f6a1738dfbaa..4fa1e93302c7 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -62,6 +62,10 @@ }; }; +&mfg_async { + domain-supply = <&da9211_vgpu_reg>; +}; + &cec { status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 22f271b1f5b0..d9e005ae5bb0 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -504,7 +504,7 @@ reg = <MT8173_POWER_DOMAIN_USB>; #power-domain-cells = <0>; }; - power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC { + mfg_async: power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC { reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>; clocks = <&clk26m>; clock-names = "mfg"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index ae549d55a94f..8e9cf36a9a41 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -13,6 +13,8 @@ / { aliases { serial0 = &uart0; + mmc0 = &mmc0; + mmc1 = &mmc1; }; chosen { diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h deleted file mode 100644 index 6221cd712718..000000000000 --- a/arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h +++ /dev/null @@ -1,1120 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (C) 2018 MediaTek Inc. - * Author: Zhiyong Tao <zhiyong.tao@mediatek.com> - * - */ - -#ifndef __MT8183_PINFUNC_H -#define __MT8183_PINFUNC_H - -#include <dt-bindings/pinctrl/mt65xx.h> - -#define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) -#define PINMUX_GPIO0__FUNC_MRG_SYNC (MTK_PIN_NO(0) | 1) -#define PINMUX_GPIO0__FUNC_PCM0_SYNC (MTK_PIN_NO(0) | 2) -#define PINMUX_GPIO0__FUNC_TP_GPIO0_AO (MTK_PIN_NO(0) | 3) -#define PINMUX_GPIO0__FUNC_SRCLKENAI0 (MTK_PIN_NO(0) | 4) -#define PINMUX_GPIO0__FUNC_SCP_SPI2_CS (MTK_PIN_NO(0) | 5) -#define PINMUX_GPIO0__FUNC_I2S3_MCK (MTK_PIN_NO(0) | 6) -#define PINMUX_GPIO0__FUNC_SPI2_CSB (MTK_PIN_NO(0) | 7) - -#define PINMUX_GPIO1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0) -#define PINMUX_GPIO1__FUNC_MRG_CLK (MTK_PIN_NO(1) | 1) -#define PINMUX_GPIO1__FUNC_PCM0_CLK (MTK_PIN_NO(1) | 2) -#define PINMUX_GPIO1__FUNC_TP_GPIO1_AO (MTK_PIN_NO(1) | 3) -#define PINMUX_GPIO1__FUNC_CLKM3 (MTK_PIN_NO(1) | 4) -#define PINMUX_GPIO1__FUNC_SCP_SPI2_MO (MTK_PIN_NO(1) | 5) -#define PINMUX_GPIO1__FUNC_I2S3_BCK (MTK_PIN_NO(1) | 6) -#define PINMUX_GPIO1__FUNC_SPI2_MO (MTK_PIN_NO(1) | 7) - -#define PINMUX_GPIO2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0) -#define PINMUX_GPIO2__FUNC_MRG_DO (MTK_PIN_NO(2) | 1) -#define PINMUX_GPIO2__FUNC_PCM0_DO (MTK_PIN_NO(2) | 2) -#define PINMUX_GPIO2__FUNC_TP_GPIO2_AO (MTK_PIN_NO(2) | 3) -#define PINMUX_GPIO2__FUNC_SCL6 (MTK_PIN_NO(2) | 4) -#define PINMUX_GPIO2__FUNC_SCP_SPI2_CK (MTK_PIN_NO(2) | 5) -#define PINMUX_GPIO2__FUNC_I2S3_LRCK (MTK_PIN_NO(2) | 6) -#define PINMUX_GPIO2__FUNC_SPI2_CLK (MTK_PIN_NO(2) | 7) - -#define PINMUX_GPIO3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0) -#define PINMUX_GPIO3__FUNC_MRG_DI (MTK_PIN_NO(3) | 1) -#define PINMUX_GPIO3__FUNC_PCM0_DI (MTK_PIN_NO(3) | 2) -#define PINMUX_GPIO3__FUNC_TP_GPIO3_AO (MTK_PIN_NO(3) | 3) -#define PINMUX_GPIO3__FUNC_SDA6 (MTK_PIN_NO(3) | 4) -#define PINMUX_GPIO3__FUNC_TDM_MCK (MTK_PIN_NO(3) | 5) -#define PINMUX_GPIO3__FUNC_I2S3_DO (MTK_PIN_NO(3) | 6) -#define PINMUX_GPIO3__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(3) | 7) - -#define PINMUX_GPIO4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0) -#define PINMUX_GPIO4__FUNC_PWM_B (MTK_PIN_NO(4) | 1) -#define PINMUX_GPIO4__FUNC_I2S0_MCK (MTK_PIN_NO(4) | 2) -#define PINMUX_GPIO4__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(4) | 3) -#define PINMUX_GPIO4__FUNC_MD_URXD1 (MTK_PIN_NO(4) | 4) -#define PINMUX_GPIO4__FUNC_TDM_BCK (MTK_PIN_NO(4) | 5) -#define PINMUX_GPIO4__FUNC_TP_GPIO4_AO (MTK_PIN_NO(4) | 6) -#define PINMUX_GPIO4__FUNC_DAP_MD32_SWD (MTK_PIN_NO(4) | 7) - -#define PINMUX_GPIO5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0) -#define PINMUX_GPIO5__FUNC_PWM_C (MTK_PIN_NO(5) | 1) -#define PINMUX_GPIO5__FUNC_I2S0_BCK (MTK_PIN_NO(5) | 2) -#define PINMUX_GPIO5__FUNC_SSPM_URXD_AO (MTK_PIN_NO(5) | 3) -#define PINMUX_GPIO5__FUNC_MD_UTXD1 (MTK_PIN_NO(5) | 4) -#define PINMUX_GPIO5__FUNC_TDM_LRCK (MTK_PIN_NO(5) | 5) -#define PINMUX_GPIO5__FUNC_TP_GPIO5_AO (MTK_PIN_NO(5) | 6) -#define PINMUX_GPIO5__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(5) | 7) - -#define PINMUX_GPIO6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0) -#define PINMUX_GPIO6__FUNC_PWM_A (MTK_PIN_NO(6) | 1) -#define PINMUX_GPIO6__FUNC_I2S0_LRCK (MTK_PIN_NO(6) | 2) -#define PINMUX_GPIO6__FUNC_IDDIG (MTK_PIN_NO(6) | 3) -#define PINMUX_GPIO6__FUNC_MD_URXD0 (MTK_PIN_NO(6) | 4) -#define PINMUX_GPIO6__FUNC_TDM_DATA0 (MTK_PIN_NO(6) | 5) -#define PINMUX_GPIO6__FUNC_TP_GPIO6_AO (MTK_PIN_NO(6) | 6) -#define PINMUX_GPIO6__FUNC_CMFLASH (MTK_PIN_NO(6) | 7) - -#define PINMUX_GPIO7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0) -#define PINMUX_GPIO7__FUNC_SPI1_B_MI (MTK_PIN_NO(7) | 1) -#define PINMUX_GPIO7__FUNC_I2S0_DI (MTK_PIN_NO(7) | 2) -#define PINMUX_GPIO7__FUNC_USB_DRVVBUS (MTK_PIN_NO(7) | 3) -#define PINMUX_GPIO7__FUNC_MD_UTXD0 (MTK_PIN_NO(7) | 4) -#define PINMUX_GPIO7__FUNC_TDM_DATA1 (MTK_PIN_NO(7) | 5) -#define PINMUX_GPIO7__FUNC_TP_GPIO7_AO (MTK_PIN_NO(7) | 6) -#define PINMUX_GPIO7__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(7) | 7) - -#define PINMUX_GPIO8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0) -#define PINMUX_GPIO8__FUNC_SPI1_B_CSB (MTK_PIN_NO(8) | 1) -#define PINMUX_GPIO8__FUNC_ANT_SEL3 (MTK_PIN_NO(8) | 2) -#define PINMUX_GPIO8__FUNC_SCL7 (MTK_PIN_NO(8) | 3) -#define PINMUX_GPIO8__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(8) | 4) -#define PINMUX_GPIO8__FUNC_TDM_DATA2 (MTK_PIN_NO(8) | 5) -#define PINMUX_GPIO8__FUNC_MD_INT0 (MTK_PIN_NO(8) | 6) -#define PINMUX_GPIO8__FUNC_JTRSTN_SEL1 (MTK_PIN_NO(8) | 7) - -#define PINMUX_GPIO9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0) -#define PINMUX_GPIO9__FUNC_SPI1_B_MO (MTK_PIN_NO(9) | 1) -#define PINMUX_GPIO9__FUNC_ANT_SEL4 (MTK_PIN_NO(9) | 2) -#define PINMUX_GPIO9__FUNC_CMMCLK2 (MTK_PIN_NO(9) | 3) -#define PINMUX_GPIO9__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(9) | 4) -#define PINMUX_GPIO9__FUNC_SSPM_JTAG_TRSTN (MTK_PIN_NO(9) | 5) -#define PINMUX_GPIO9__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(9) | 6) -#define PINMUX_GPIO9__FUNC_DBG_MON_B10 (MTK_PIN_NO(9) | 7) - -#define PINMUX_GPIO10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0) -#define PINMUX_GPIO10__FUNC_SPI1_B_CLK (MTK_PIN_NO(10) | 1) -#define PINMUX_GPIO10__FUNC_ANT_SEL5 (MTK_PIN_NO(10) | 2) -#define PINMUX_GPIO10__FUNC_CMMCLK3 (MTK_PIN_NO(10) | 3) -#define PINMUX_GPIO10__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(10) | 4) -#define PINMUX_GPIO10__FUNC_TDM_DATA3 (MTK_PIN_NO(10) | 5) -#define PINMUX_GPIO10__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(10) | 6) -#define PINMUX_GPIO10__FUNC_DBG_MON_B11 (MTK_PIN_NO(10) | 7) - -#define PINMUX_GPIO11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0) -#define PINMUX_GPIO11__FUNC_TP_URXD1_AO (MTK_PIN_NO(11) | 1) -#define PINMUX_GPIO11__FUNC_IDDIG (MTK_PIN_NO(11) | 2) -#define PINMUX_GPIO11__FUNC_SCL6 (MTK_PIN_NO(11) | 3) -#define PINMUX_GPIO11__FUNC_UCTS1 (MTK_PIN_NO(11) | 4) -#define PINMUX_GPIO11__FUNC_UCTS0 (MTK_PIN_NO(11) | 5) -#define PINMUX_GPIO11__FUNC_SRCLKENAI1 (MTK_PIN_NO(11) | 6) -#define PINMUX_GPIO11__FUNC_I2S5_MCK (MTK_PIN_NO(11) | 7) - -#define PINMUX_GPIO12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0) -#define PINMUX_GPIO12__FUNC_TP_UTXD1_AO (MTK_PIN_NO(12) | 1) -#define PINMUX_GPIO12__FUNC_USB_DRVVBUS (MTK_PIN_NO(12) | 2) -#define PINMUX_GPIO12__FUNC_SDA6 (MTK_PIN_NO(12) | 3) -#define PINMUX_GPIO12__FUNC_URTS1 (MTK_PIN_NO(12) | 4) -#define PINMUX_GPIO12__FUNC_URTS0 (MTK_PIN_NO(12) | 5) -#define PINMUX_GPIO12__FUNC_I2S2_DI2 (MTK_PIN_NO(12) | 6) -#define PINMUX_GPIO12__FUNC_I2S5_BCK (MTK_PIN_NO(12) | 7) - -#define PINMUX_GPIO13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0) -#define PINMUX_GPIO13__FUNC_DBPI_D0 (MTK_PIN_NO(13) | 1) -#define PINMUX_GPIO13__FUNC_SPI5_MI (MTK_PIN_NO(13) | 2) -#define PINMUX_GPIO13__FUNC_PCM0_SYNC (MTK_PIN_NO(13) | 3) -#define PINMUX_GPIO13__FUNC_MD_URXD0 (MTK_PIN_NO(13) | 4) -#define PINMUX_GPIO13__FUNC_ANT_SEL3 (MTK_PIN_NO(13) | 5) -#define PINMUX_GPIO13__FUNC_I2S0_MCK (MTK_PIN_NO(13) | 6) -#define PINMUX_GPIO13__FUNC_DBG_MON_B15 (MTK_PIN_NO(13) | 7) - -#define PINMUX_GPIO14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0) -#define PINMUX_GPIO14__FUNC_DBPI_D1 (MTK_PIN_NO(14) | 1) -#define PINMUX_GPIO14__FUNC_SPI5_CSB (MTK_PIN_NO(14) | 2) -#define PINMUX_GPIO14__FUNC_PCM0_CLK (MTK_PIN_NO(14) | 3) -#define PINMUX_GPIO14__FUNC_MD_UTXD0 (MTK_PIN_NO(14) | 4) -#define PINMUX_GPIO14__FUNC_ANT_SEL4 (MTK_PIN_NO(14) | 5) -#define PINMUX_GPIO14__FUNC_I2S0_BCK (MTK_PIN_NO(14) | 6) -#define PINMUX_GPIO14__FUNC_DBG_MON_B16 (MTK_PIN_NO(14) | 7) - -#define PINMUX_GPIO15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0) -#define PINMUX_GPIO15__FUNC_DBPI_D2 (MTK_PIN_NO(15) | 1) -#define PINMUX_GPIO15__FUNC_SPI5_MO (MTK_PIN_NO(15) | 2) -#define PINMUX_GPIO15__FUNC_PCM0_DO (MTK_PIN_NO(15) | 3) -#define PINMUX_GPIO15__FUNC_MD_URXD1 (MTK_PIN_NO(15) | 4) -#define PINMUX_GPIO15__FUNC_ANT_SEL5 (MTK_PIN_NO(15) | 5) -#define PINMUX_GPIO15__FUNC_I2S0_LRCK (MTK_PIN_NO(15) | 6) -#define PINMUX_GPIO15__FUNC_DBG_MON_B17 (MTK_PIN_NO(15) | 7) - -#define PINMUX_GPIO16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0) -#define PINMUX_GPIO16__FUNC_DBPI_D3 (MTK_PIN_NO(16) | 1) -#define PINMUX_GPIO16__FUNC_SPI5_CLK (MTK_PIN_NO(16) | 2) -#define PINMUX_GPIO16__FUNC_PCM0_DI (MTK_PIN_NO(16) | 3) -#define PINMUX_GPIO16__FUNC_MD_UTXD1 (MTK_PIN_NO(16) | 4) -#define PINMUX_GPIO16__FUNC_ANT_SEL6 (MTK_PIN_NO(16) | 5) -#define PINMUX_GPIO16__FUNC_I2S0_DI (MTK_PIN_NO(16) | 6) -#define PINMUX_GPIO16__FUNC_DBG_MON_B23 (MTK_PIN_NO(16) | 7) - -#define PINMUX_GPIO17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0) -#define PINMUX_GPIO17__FUNC_DBPI_D4 (MTK_PIN_NO(17) | 1) -#define PINMUX_GPIO17__FUNC_SPI4_MI (MTK_PIN_NO(17) | 2) -#define PINMUX_GPIO17__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(17) | 3) -#define PINMUX_GPIO17__FUNC_MD_INT0 (MTK_PIN_NO(17) | 4) -#define PINMUX_GPIO17__FUNC_ANT_SEL7 (MTK_PIN_NO(17) | 5) -#define PINMUX_GPIO17__FUNC_I2S3_MCK (MTK_PIN_NO(17) | 6) -#define PINMUX_GPIO17__FUNC_DBG_MON_A1 (MTK_PIN_NO(17) | 7) - -#define PINMUX_GPIO18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0) -#define PINMUX_GPIO18__FUNC_DBPI_D5 (MTK_PIN_NO(18) | 1) -#define PINMUX_GPIO18__FUNC_SPI4_CSB (MTK_PIN_NO(18) | 2) -#define PINMUX_GPIO18__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(18) | 3) -#define PINMUX_GPIO18__FUNC_MD_INT0 (MTK_PIN_NO(18) | 4) -#define PINMUX_GPIO18__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(18) | 5) -#define PINMUX_GPIO18__FUNC_I2S3_BCK (MTK_PIN_NO(18) | 6) -#define PINMUX_GPIO18__FUNC_DBG_MON_A2 (MTK_PIN_NO(18) | 7) - -#define PINMUX_GPIO19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0) -#define PINMUX_GPIO19__FUNC_DBPI_D6 (MTK_PIN_NO(19) | 1) -#define PINMUX_GPIO19__FUNC_SPI4_MO (MTK_PIN_NO(19) | 2) -#define PINMUX_GPIO19__FUNC_CONN_MCU_TDO (MTK_PIN_NO(19) | 3) -#define PINMUX_GPIO19__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(19) | 4) -#define PINMUX_GPIO19__FUNC_URXD1 (MTK_PIN_NO(19) | 5) -#define PINMUX_GPIO19__FUNC_I2S3_LRCK (MTK_PIN_NO(19) | 6) -#define PINMUX_GPIO19__FUNC_DBG_MON_A3 (MTK_PIN_NO(19) | 7) - -#define PINMUX_GPIO20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0) -#define PINMUX_GPIO20__FUNC_DBPI_D7 (MTK_PIN_NO(20) | 1) -#define PINMUX_GPIO20__FUNC_SPI4_CLK (MTK_PIN_NO(20) | 2) -#define PINMUX_GPIO20__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(20) | 3) -#define PINMUX_GPIO20__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(20) | 4) -#define PINMUX_GPIO20__FUNC_UTXD1 (MTK_PIN_NO(20) | 5) -#define PINMUX_GPIO20__FUNC_I2S3_DO (MTK_PIN_NO(20) | 6) -#define PINMUX_GPIO20__FUNC_DBG_MON_A19 (MTK_PIN_NO(20) | 7) - -#define PINMUX_GPIO21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0) -#define PINMUX_GPIO21__FUNC_DBPI_D8 (MTK_PIN_NO(21) | 1) -#define PINMUX_GPIO21__FUNC_SPI3_MI (MTK_PIN_NO(21) | 2) -#define PINMUX_GPIO21__FUNC_CONN_MCU_TMS (MTK_PIN_NO(21) | 3) -#define PINMUX_GPIO21__FUNC_DAP_MD32_SWD (MTK_PIN_NO(21) | 4) -#define PINMUX_GPIO21__FUNC_CONN_MCU_AICE_TMSC (MTK_PIN_NO(21) | 5) -#define PINMUX_GPIO21__FUNC_I2S2_MCK (MTK_PIN_NO(21) | 6) -#define PINMUX_GPIO21__FUNC_DBG_MON_B5 (MTK_PIN_NO(21) | 7) - -#define PINMUX_GPIO22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0) -#define PINMUX_GPIO22__FUNC_DBPI_D9 (MTK_PIN_NO(22) | 1) -#define PINMUX_GPIO22__FUNC_SPI3_CSB (MTK_PIN_NO(22) | 2) -#define PINMUX_GPIO22__FUNC_CONN_MCU_TCK (MTK_PIN_NO(22) | 3) -#define PINMUX_GPIO22__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(22) | 4) -#define PINMUX_GPIO22__FUNC_CONN_MCU_AICE_TCKC (MTK_PIN_NO(22) | 5) -#define PINMUX_GPIO22__FUNC_I2S2_BCK (MTK_PIN_NO(22) | 6) -#define PINMUX_GPIO22__FUNC_DBG_MON_B6 (MTK_PIN_NO(22) | 7) - -#define PINMUX_GPIO23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0) -#define PINMUX_GPIO23__FUNC_DBPI_D10 (MTK_PIN_NO(23) | 1) -#define PINMUX_GPIO23__FUNC_SPI3_MO (MTK_PIN_NO(23) | 2) -#define PINMUX_GPIO23__FUNC_CONN_MCU_TDI (MTK_PIN_NO(23) | 3) -#define PINMUX_GPIO23__FUNC_UCTS1 (MTK_PIN_NO(23) | 4) -#define PINMUX_GPIO23__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(23) | 5) -#define PINMUX_GPIO23__FUNC_I2S2_LRCK (MTK_PIN_NO(23) | 6) -#define PINMUX_GPIO23__FUNC_DBG_MON_B7 (MTK_PIN_NO(23) | 7) - -#define PINMUX_GPIO24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0) -#define PINMUX_GPIO24__FUNC_DBPI_D11 (MTK_PIN_NO(24) | 1) -#define PINMUX_GPIO24__FUNC_SPI3_CLK (MTK_PIN_NO(24) | 2) -#define PINMUX_GPIO24__FUNC_SRCLKENAI0 (MTK_PIN_NO(24) | 3) -#define PINMUX_GPIO24__FUNC_URTS1 (MTK_PIN_NO(24) | 4) -#define PINMUX_GPIO24__FUNC_IO_JTAG_TCK (MTK_PIN_NO(24) | 5) -#define PINMUX_GPIO24__FUNC_I2S2_DI (MTK_PIN_NO(24) | 6) -#define PINMUX_GPIO24__FUNC_DBG_MON_B31 (MTK_PIN_NO(24) | 7) - -#define PINMUX_GPIO25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0) -#define PINMUX_GPIO25__FUNC_DBPI_HSYNC (MTK_PIN_NO(25) | 1) -#define PINMUX_GPIO25__FUNC_ANT_SEL0 (MTK_PIN_NO(25) | 2) -#define PINMUX_GPIO25__FUNC_SCL6 (MTK_PIN_NO(25) | 3) -#define PINMUX_GPIO25__FUNC_KPCOL2 (MTK_PIN_NO(25) | 4) -#define PINMUX_GPIO25__FUNC_IO_JTAG_TMS (MTK_PIN_NO(25) | 5) -#define PINMUX_GPIO25__FUNC_I2S1_MCK (MTK_PIN_NO(25) | 6) -#define PINMUX_GPIO25__FUNC_DBG_MON_B0 (MTK_PIN_NO(25) | 7) - -#define PINMUX_GPIO26__FUNC_GPIO26 (MTK_PIN_NO(26) | 0) -#define PINMUX_GPIO26__FUNC_DBPI_VSYNC (MTK_PIN_NO(26) | 1) -#define PINMUX_GPIO26__FUNC_ANT_SEL1 (MTK_PIN_NO(26) | 2) -#define PINMUX_GPIO26__FUNC_SDA6 (MTK_PIN_NO(26) | 3) -#define PINMUX_GPIO26__FUNC_KPROW2 (MTK_PIN_NO(26) | 4) -#define PINMUX_GPIO26__FUNC_IO_JTAG_TDI (MTK_PIN_NO(26) | 5) -#define PINMUX_GPIO26__FUNC_I2S1_BCK (MTK_PIN_NO(26) | 6) -#define PINMUX_GPIO26__FUNC_DBG_MON_B1 (MTK_PIN_NO(26) | 7) - -#define PINMUX_GPIO27__FUNC_GPIO27 (MTK_PIN_NO(27) | 0) -#define PINMUX_GPIO27__FUNC_DBPI_DE (MTK_PIN_NO(27) | 1) -#define PINMUX_GPIO27__FUNC_ANT_SEL2 (MTK_PIN_NO(27) | 2) -#define PINMUX_GPIO27__FUNC_SCL7 (MTK_PIN_NO(27) | 3) -#define PINMUX_GPIO27__FUNC_DMIC_CLK (MTK_PIN_NO(27) | 4) -#define PINMUX_GPIO27__FUNC_IO_JTAG_TDO (MTK_PIN_NO(27) | 5) -#define PINMUX_GPIO27__FUNC_I2S1_LRCK (MTK_PIN_NO(27) | 6) -#define PINMUX_GPIO27__FUNC_DBG_MON_B9 (MTK_PIN_NO(27) | 7) - -#define PINMUX_GPIO28__FUNC_GPIO28 (MTK_PIN_NO(28) | 0) -#define PINMUX_GPIO28__FUNC_DBPI_CK (MTK_PIN_NO(28) | 1) -#define PINMUX_GPIO28__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(28) | 2) -#define PINMUX_GPIO28__FUNC_SDA7 (MTK_PIN_NO(28) | 3) -#define PINMUX_GPIO28__FUNC_DMIC_DAT (MTK_PIN_NO(28) | 4) -#define PINMUX_GPIO28__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(28) | 5) -#define PINMUX_GPIO28__FUNC_I2S1_DO (MTK_PIN_NO(28) | 6) -#define PINMUX_GPIO28__FUNC_DBG_MON_B32 (MTK_PIN_NO(28) | 7) - -#define PINMUX_GPIO29__FUNC_GPIO29 (MTK_PIN_NO(29) | 0) -#define PINMUX_GPIO29__FUNC_MSDC1_CLK (MTK_PIN_NO(29) | 1) -#define PINMUX_GPIO29__FUNC_IO_JTAG_TCK (MTK_PIN_NO(29) | 2) -#define PINMUX_GPIO29__FUNC_UDI_TCK (MTK_PIN_NO(29) | 3) -#define PINMUX_GPIO29__FUNC_CONN_DSP_JCK (MTK_PIN_NO(29) | 4) -#define PINMUX_GPIO29__FUNC_SSPM_JTAG_TCK (MTK_PIN_NO(29) | 5) -#define PINMUX_GPIO29__FUNC_PCM1_CLK (MTK_PIN_NO(29) | 6) -#define PINMUX_GPIO29__FUNC_DBG_MON_A6 (MTK_PIN_NO(29) | 7) - -#define PINMUX_GPIO30__FUNC_GPIO30 (MTK_PIN_NO(30) | 0) -#define PINMUX_GPIO30__FUNC_MSDC1_DAT3 (MTK_PIN_NO(30) | 1) -#define PINMUX_GPIO30__FUNC_DAP_MD32_SWD (MTK_PIN_NO(30) | 2) -#define PINMUX_GPIO30__FUNC_CONN_MCU_AICE_TMSC (MTK_PIN_NO(30) | 3) -#define PINMUX_GPIO30__FUNC_CONN_DSP_JINTP (MTK_PIN_NO(30) | 4) -#define PINMUX_GPIO30__FUNC_SSPM_JTAG_TRSTN (MTK_PIN_NO(30) | 5) -#define PINMUX_GPIO30__FUNC_PCM1_DI (MTK_PIN_NO(30) | 6) -#define PINMUX_GPIO30__FUNC_DBG_MON_A7 (MTK_PIN_NO(30) | 7) - -#define PINMUX_GPIO31__FUNC_GPIO31 (MTK_PIN_NO(31) | 0) -#define PINMUX_GPIO31__FUNC_MSDC1_CMD (MTK_PIN_NO(31) | 1) -#define PINMUX_GPIO31__FUNC_IO_JTAG_TMS (MTK_PIN_NO(31) | 2) -#define PINMUX_GPIO31__FUNC_UDI_TMS (MTK_PIN_NO(31) | 3) -#define PINMUX_GPIO31__FUNC_CONN_DSP_JMS (MTK_PIN_NO(31) | 4) -#define PINMUX_GPIO31__FUNC_SSPM_JTAG_TMS (MTK_PIN_NO(31) | 5) -#define PINMUX_GPIO31__FUNC_PCM1_SYNC (MTK_PIN_NO(31) | 6) -#define PINMUX_GPIO31__FUNC_DBG_MON_A8 (MTK_PIN_NO(31) | 7) - -#define PINMUX_GPIO32__FUNC_GPIO32 (MTK_PIN_NO(32) | 0) -#define PINMUX_GPIO32__FUNC_MSDC1_DAT0 (MTK_PIN_NO(32) | 1) -#define PINMUX_GPIO32__FUNC_IO_JTAG_TDI (MTK_PIN_NO(32) | 2) -#define PINMUX_GPIO32__FUNC_UDI_TDI (MTK_PIN_NO(32) | 3) -#define PINMUX_GPIO32__FUNC_CONN_DSP_JDI (MTK_PIN_NO(32) | 4) -#define PINMUX_GPIO32__FUNC_SSPM_JTAG_TDI (MTK_PIN_NO(32) | 5) -#define PINMUX_GPIO32__FUNC_PCM1_DO0 (MTK_PIN_NO(32) | 6) -#define PINMUX_GPIO32__FUNC_DBG_MON_A9 (MTK_PIN_NO(32) | 7) - -#define PINMUX_GPIO33__FUNC_GPIO33 (MTK_PIN_NO(33) | 0) -#define PINMUX_GPIO33__FUNC_MSDC1_DAT2 (MTK_PIN_NO(33) | 1) -#define PINMUX_GPIO33__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(33) | 2) -#define PINMUX_GPIO33__FUNC_UDI_NTRST (MTK_PIN_NO(33) | 3) -#define PINMUX_GPIO33__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(33) | 4) -#define PINMUX_GPIO33__FUNC_CONN_MCU_AICE_TCKC (MTK_PIN_NO(33) | 5) -#define PINMUX_GPIO33__FUNC_PCM1_DO2 (MTK_PIN_NO(33) | 6) -#define PINMUX_GPIO33__FUNC_DBG_MON_A10 (MTK_PIN_NO(33) | 7) - -#define PINMUX_GPIO34__FUNC_GPIO34 (MTK_PIN_NO(34) | 0) -#define PINMUX_GPIO34__FUNC_MSDC1_DAT1 (MTK_PIN_NO(34) | 1) -#define PINMUX_GPIO34__FUNC_IO_JTAG_TDO (MTK_PIN_NO(34) | 2) -#define PINMUX_GPIO34__FUNC_UDI_TDO (MTK_PIN_NO(34) | 3) -#define PINMUX_GPIO34__FUNC_CONN_DSP_JDO (MTK_PIN_NO(34) | 4) -#define PINMUX_GPIO34__FUNC_SSPM_JTAG_TDO (MTK_PIN_NO(34) | 5) -#define PINMUX_GPIO34__FUNC_PCM1_DO1 (MTK_PIN_NO(34) | 6) -#define PINMUX_GPIO34__FUNC_DBG_MON_A11 (MTK_PIN_NO(34) | 7) - -#define PINMUX_GPIO35__FUNC_GPIO35 (MTK_PIN_NO(35) | 0) -#define PINMUX_GPIO35__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(35) | 1) -#define PINMUX_GPIO35__FUNC_CCU_JTAG_TDO (MTK_PIN_NO(35) | 2) -#define PINMUX_GPIO35__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(35) | 3) -#define PINMUX_GPIO35__FUNC_SCP_JTAG_TDO (MTK_PIN_NO(35) | 5) -#define PINMUX_GPIO35__FUNC_CONN_DSP_JMS (MTK_PIN_NO(35) | 6) -#define PINMUX_GPIO35__FUNC_DBG_MON_A28 (MTK_PIN_NO(35) | 7) - -#define PINMUX_GPIO36__FUNC_GPIO36 (MTK_PIN_NO(36) | 0) -#define PINMUX_GPIO36__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(36) | 1) -#define PINMUX_GPIO36__FUNC_CCU_JTAG_TMS (MTK_PIN_NO(36) | 2) -#define PINMUX_GPIO36__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(36) | 3) -#define PINMUX_GPIO36__FUNC_CONN_MCU_AICE_TMSC (MTK_PIN_NO(36) | 4) -#define PINMUX_GPIO36__FUNC_SCP_JTAG_TMS (MTK_PIN_NO(36) | 5) -#define PINMUX_GPIO36__FUNC_CONN_DSP_JINTP (MTK_PIN_NO(36) | 6) -#define PINMUX_GPIO36__FUNC_DBG_MON_A29 (MTK_PIN_NO(36) | 7) - -#define PINMUX_GPIO37__FUNC_GPIO37 (MTK_PIN_NO(37) | 0) -#define PINMUX_GPIO37__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(37) | 1) -#define PINMUX_GPIO37__FUNC_CCU_JTAG_TDI (MTK_PIN_NO(37) | 2) -#define PINMUX_GPIO37__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(37) | 3) -#define PINMUX_GPIO37__FUNC_SCP_JTAG_TDI (MTK_PIN_NO(37) | 5) -#define PINMUX_GPIO37__FUNC_CONN_DSP_JDO (MTK_PIN_NO(37) | 6) -#define PINMUX_GPIO37__FUNC_DBG_MON_A30 (MTK_PIN_NO(37) | 7) - -#define PINMUX_GPIO38__FUNC_GPIO38 (MTK_PIN_NO(38) | 0) -#define PINMUX_GPIO38__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(38) | 1) -#define PINMUX_GPIO38__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(38) | 3) -#define PINMUX_GPIO38__FUNC_CONN_MCU_AICE_TCKC (MTK_PIN_NO(38) | 4) -#define PINMUX_GPIO38__FUNC_DBG_MON_A20 (MTK_PIN_NO(38) | 7) - -#define PINMUX_GPIO39__FUNC_GPIO39 (MTK_PIN_NO(39) | 0) -#define PINMUX_GPIO39__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(39) | 1) -#define PINMUX_GPIO39__FUNC_CCU_JTAG_TCK (MTK_PIN_NO(39) | 2) -#define PINMUX_GPIO39__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(39) | 3) -#define PINMUX_GPIO39__FUNC_SCP_JTAG_TCK (MTK_PIN_NO(39) | 5) -#define PINMUX_GPIO39__FUNC_CONN_DSP_JCK (MTK_PIN_NO(39) | 6) -#define PINMUX_GPIO39__FUNC_DBG_MON_A31 (MTK_PIN_NO(39) | 7) - -#define PINMUX_GPIO40__FUNC_GPIO40 (MTK_PIN_NO(40) | 0) -#define PINMUX_GPIO40__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(40) | 1) -#define PINMUX_GPIO40__FUNC_CCU_JTAG_TRST (MTK_PIN_NO(40) | 2) -#define PINMUX_GPIO40__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(40) | 3) -#define PINMUX_GPIO40__FUNC_SCP_JTAG_TRSTN (MTK_PIN_NO(40) | 5) -#define PINMUX_GPIO40__FUNC_CONN_DSP_JDI (MTK_PIN_NO(40) | 6) -#define PINMUX_GPIO40__FUNC_DBG_MON_A32 (MTK_PIN_NO(40) | 7) - -#define PINMUX_GPIO41__FUNC_GPIO41 (MTK_PIN_NO(41) | 0) -#define PINMUX_GPIO41__FUNC_IDDIG (MTK_PIN_NO(41) | 1) -#define PINMUX_GPIO41__FUNC_URXD1 (MTK_PIN_NO(41) | 2) -#define PINMUX_GPIO41__FUNC_UCTS0 (MTK_PIN_NO(41) | 3) -#define PINMUX_GPIO41__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(41) | 4) -#define PINMUX_GPIO41__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(41) | 5) -#define PINMUX_GPIO41__FUNC_DMIC_CLK (MTK_PIN_NO(41) | 6) - -#define PINMUX_GPIO42__FUNC_GPIO42 (MTK_PIN_NO(42) | 0) -#define PINMUX_GPIO42__FUNC_USB_DRVVBUS (MTK_PIN_NO(42) | 1) -#define PINMUX_GPIO42__FUNC_UTXD1 (MTK_PIN_NO(42) | 2) -#define PINMUX_GPIO42__FUNC_URTS0 (MTK_PIN_NO(42) | 3) -#define PINMUX_GPIO42__FUNC_SSPM_URXD_AO (MTK_PIN_NO(42) | 4) -#define PINMUX_GPIO42__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(42) | 5) -#define PINMUX_GPIO42__FUNC_DMIC_DAT (MTK_PIN_NO(42) | 6) - -#define PINMUX_GPIO43__FUNC_GPIO43 (MTK_PIN_NO(43) | 0) -#define PINMUX_GPIO43__FUNC_DISP_PWM (MTK_PIN_NO(43) | 1) - -#define PINMUX_GPIO44__FUNC_GPIO44 (MTK_PIN_NO(44) | 0) -#define PINMUX_GPIO44__FUNC_DSI_TE (MTK_PIN_NO(44) | 1) - -#define PINMUX_GPIO45__FUNC_GPIO45 (MTK_PIN_NO(45) | 0) -#define PINMUX_GPIO45__FUNC_LCM_RST (MTK_PIN_NO(45) | 1) - -#define PINMUX_GPIO46__FUNC_GPIO46 (MTK_PIN_NO(46) | 0) -#define PINMUX_GPIO46__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(46) | 1) -#define PINMUX_GPIO46__FUNC_URXD1 (MTK_PIN_NO(46) | 2) -#define PINMUX_GPIO46__FUNC_UCTS1 (MTK_PIN_NO(46) | 3) -#define PINMUX_GPIO46__FUNC_CCU_UTXD_AO (MTK_PIN_NO(46) | 4) -#define PINMUX_GPIO46__FUNC_TP_UCTS1_AO (MTK_PIN_NO(46) | 5) -#define PINMUX_GPIO46__FUNC_IDDIG (MTK_PIN_NO(46) | 6) -#define PINMUX_GPIO46__FUNC_I2S5_LRCK (MTK_PIN_NO(46) | 7) - -#define PINMUX_GPIO47__FUNC_GPIO47 (MTK_PIN_NO(47) | 0) -#define PINMUX_GPIO47__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(47) | 1) -#define PINMUX_GPIO47__FUNC_UTXD1 (MTK_PIN_NO(47) | 2) -#define PINMUX_GPIO47__FUNC_URTS1 (MTK_PIN_NO(47) | 3) -#define PINMUX_GPIO47__FUNC_CCU_URXD_AO (MTK_PIN_NO(47) | 4) -#define PINMUX_GPIO47__FUNC_TP_URTS1_AO (MTK_PIN_NO(47) | 5) -#define PINMUX_GPIO47__FUNC_USB_DRVVBUS (MTK_PIN_NO(47) | 6) -#define PINMUX_GPIO47__FUNC_I2S5_DO (MTK_PIN_NO(47) | 7) - -#define PINMUX_GPIO48__FUNC_GPIO48 (MTK_PIN_NO(48) | 0) -#define PINMUX_GPIO48__FUNC_SCL5 (MTK_PIN_NO(48) | 1) - -#define PINMUX_GPIO49__FUNC_GPIO49 (MTK_PIN_NO(49) | 0) -#define PINMUX_GPIO49__FUNC_SDA5 (MTK_PIN_NO(49) | 1) - -#define PINMUX_GPIO50__FUNC_GPIO50 (MTK_PIN_NO(50) | 0) -#define PINMUX_GPIO50__FUNC_SCL3 (MTK_PIN_NO(50) | 1) - -#define PINMUX_GPIO51__FUNC_GPIO51 (MTK_PIN_NO(51) | 0) -#define PINMUX_GPIO51__FUNC_SDA3 (MTK_PIN_NO(51) | 1) - -#define PINMUX_GPIO52__FUNC_GPIO52 (MTK_PIN_NO(52) | 0) -#define PINMUX_GPIO52__FUNC_BPI_ANT2 (MTK_PIN_NO(52) | 1) - -#define PINMUX_GPIO53__FUNC_GPIO53 (MTK_PIN_NO(53) | 0) -#define PINMUX_GPIO53__FUNC_BPI_ANT0 (MTK_PIN_NO(53) | 1) - -#define PINMUX_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0) -#define PINMUX_GPIO54__FUNC_BPI_OLAT1 (MTK_PIN_NO(54) | 1) - -#define PINMUX_GPIO55__FUNC_GPIO55 (MTK_PIN_NO(55) | 0) -#define PINMUX_GPIO55__FUNC_BPI_BUS8 (MTK_PIN_NO(55) | 1) - -#define PINMUX_GPIO56__FUNC_GPIO56 (MTK_PIN_NO(56) | 0) -#define PINMUX_GPIO56__FUNC_BPI_BUS9 (MTK_PIN_NO(56) | 1) -#define PINMUX_GPIO56__FUNC_SCL_6306 (MTK_PIN_NO(56) | 2) - -#define PINMUX_GPIO57__FUNC_GPIO57 (MTK_PIN_NO(57) | 0) -#define PINMUX_GPIO57__FUNC_BPI_BUS10 (MTK_PIN_NO(57) | 1) -#define PINMUX_GPIO57__FUNC_SDA_6306 (MTK_PIN_NO(57) | 2) - -#define PINMUX_GPIO58__FUNC_GPIO58 (MTK_PIN_NO(58) | 0) -#define PINMUX_GPIO58__FUNC_RFIC0_BSI_D2 (MTK_PIN_NO(58) | 1) -#define PINMUX_GPIO58__FUNC_SPM_BSI_D2 (MTK_PIN_NO(58) | 2) -#define PINMUX_GPIO58__FUNC_PWM_B (MTK_PIN_NO(58) | 3) - -#define PINMUX_GPIO59__FUNC_GPIO59 (MTK_PIN_NO(59) | 0) -#define PINMUX_GPIO59__FUNC_RFIC0_BSI_D1 (MTK_PIN_NO(59) | 1) -#define PINMUX_GPIO59__FUNC_SPM_BSI_D1 (MTK_PIN_NO(59) | 2) - -#define PINMUX_GPIO60__FUNC_GPIO60 (MTK_PIN_NO(60) | 0) -#define PINMUX_GPIO60__FUNC_RFIC0_BSI_D0 (MTK_PIN_NO(60) | 1) -#define PINMUX_GPIO60__FUNC_SPM_BSI_D0 (MTK_PIN_NO(60) | 2) - -#define PINMUX_GPIO61__FUNC_GPIO61 (MTK_PIN_NO(61) | 0) -#define PINMUX_GPIO61__FUNC_MIPI1_SDATA (MTK_PIN_NO(61) | 1) - -#define PINMUX_GPIO62__FUNC_GPIO62 (MTK_PIN_NO(62) | 0) -#define PINMUX_GPIO62__FUNC_MIPI1_SCLK (MTK_PIN_NO(62) | 1) - -#define PINMUX_GPIO63__FUNC_GPIO63 (MTK_PIN_NO(63) | 0) -#define PINMUX_GPIO63__FUNC_MIPI0_SDATA (MTK_PIN_NO(63) | 1) - -#define PINMUX_GPIO64__FUNC_GPIO64 (MTK_PIN_NO(64) | 0) -#define PINMUX_GPIO64__FUNC_MIPI0_SCLK (MTK_PIN_NO(64) | 1) - -#define PINMUX_GPIO65__FUNC_GPIO65 (MTK_PIN_NO(65) | 0) -#define PINMUX_GPIO65__FUNC_MIPI3_SDATA (MTK_PIN_NO(65) | 1) -#define PINMUX_GPIO65__FUNC_BPI_OLAT2 (MTK_PIN_NO(65) | 2) - -#define PINMUX_GPIO66__FUNC_GPIO66 (MTK_PIN_NO(66) | 0) -#define PINMUX_GPIO66__FUNC_MIPI3_SCLK (MTK_PIN_NO(66) | 1) -#define PINMUX_GPIO66__FUNC_BPI_OLAT3 (MTK_PIN_NO(66) | 2) - -#define PINMUX_GPIO67__FUNC_GPIO67 (MTK_PIN_NO(67) | 0) -#define PINMUX_GPIO67__FUNC_MIPI2_SDATA (MTK_PIN_NO(67) | 1) - -#define PINMUX_GPIO68__FUNC_GPIO68 (MTK_PIN_NO(68) | 0) -#define PINMUX_GPIO68__FUNC_MIPI2_SCLK (MTK_PIN_NO(68) | 1) - -#define PINMUX_GPIO69__FUNC_GPIO69 (MTK_PIN_NO(69) | 0) -#define PINMUX_GPIO69__FUNC_BPI_BUS7 (MTK_PIN_NO(69) | 1) - -#define PINMUX_GPIO70__FUNC_GPIO70 (MTK_PIN_NO(70) | 0) -#define PINMUX_GPIO70__FUNC_BPI_BUS6 (MTK_PIN_NO(70) | 1) - -#define PINMUX_GPIO71__FUNC_GPIO71 (MTK_PIN_NO(71) | 0) -#define PINMUX_GPIO71__FUNC_BPI_BUS5 (MTK_PIN_NO(71) | 1) - -#define PINMUX_GPIO72__FUNC_GPIO72 (MTK_PIN_NO(72) | 0) -#define PINMUX_GPIO72__FUNC_BPI_BUS4 (MTK_PIN_NO(72) | 1) - -#define PINMUX_GPIO73__FUNC_GPIO73 (MTK_PIN_NO(73) | 0) -#define PINMUX_GPIO73__FUNC_BPI_BUS3 (MTK_PIN_NO(73) | 1) - -#define PINMUX_GPIO74__FUNC_GPIO74 (MTK_PIN_NO(74) | 0) -#define PINMUX_GPIO74__FUNC_BPI_BUS2 (MTK_PIN_NO(74) | 1) - -#define PINMUX_GPIO75__FUNC_GPIO75 (MTK_PIN_NO(75) | 0) -#define PINMUX_GPIO75__FUNC_BPI_BUS1 (MTK_PIN_NO(75) | 1) - -#define PINMUX_GPIO76__FUNC_GPIO76 (MTK_PIN_NO(76) | 0) -#define PINMUX_GPIO76__FUNC_BPI_BUS0 (MTK_PIN_NO(76) | 1) - -#define PINMUX_GPIO77__FUNC_GPIO77 (MTK_PIN_NO(77) | 0) -#define PINMUX_GPIO77__FUNC_BPI_ANT1 (MTK_PIN_NO(77) | 1) - -#define PINMUX_GPIO78__FUNC_GPIO78 (MTK_PIN_NO(78) | 0) -#define PINMUX_GPIO78__FUNC_BPI_OLAT0 (MTK_PIN_NO(78) | 1) - -#define PINMUX_GPIO79__FUNC_GPIO79 (MTK_PIN_NO(79) | 0) -#define PINMUX_GPIO79__FUNC_BPI_PA_VM1 (MTK_PIN_NO(79) | 1) -#define PINMUX_GPIO79__FUNC_MIPI4_SDATA (MTK_PIN_NO(79) | 2) - -#define PINMUX_GPIO80__FUNC_GPIO80 (MTK_PIN_NO(80) | 0) -#define PINMUX_GPIO80__FUNC_BPI_PA_VM0 (MTK_PIN_NO(80) | 1) -#define PINMUX_GPIO80__FUNC_MIPI4_SCLK (MTK_PIN_NO(80) | 2) - -#define PINMUX_GPIO81__FUNC_GPIO81 (MTK_PIN_NO(81) | 0) -#define PINMUX_GPIO81__FUNC_SDA1 (MTK_PIN_NO(81) | 1) - -#define PINMUX_GPIO82__FUNC_GPIO82 (MTK_PIN_NO(82) | 0) -#define PINMUX_GPIO82__FUNC_SDA0 (MTK_PIN_NO(82) | 1) - -#define PINMUX_GPIO83__FUNC_GPIO83 (MTK_PIN_NO(83) | 0) -#define PINMUX_GPIO83__FUNC_SCL0 (MTK_PIN_NO(83) | 1) - -#define PINMUX_GPIO84__FUNC_GPIO84 (MTK_PIN_NO(84) | 0) -#define PINMUX_GPIO84__FUNC_SCL1 (MTK_PIN_NO(84) | 1) - -#define PINMUX_GPIO85__FUNC_GPIO85 (MTK_PIN_NO(85) | 0) -#define PINMUX_GPIO85__FUNC_SPI0_MI (MTK_PIN_NO(85) | 1) -#define PINMUX_GPIO85__FUNC_SCP_SPI0_MI (MTK_PIN_NO(85) | 2) -#define PINMUX_GPIO85__FUNC_CLKM3 (MTK_PIN_NO(85) | 3) -#define PINMUX_GPIO85__FUNC_I2S1_BCK (MTK_PIN_NO(85) | 4) -#define PINMUX_GPIO85__FUNC_MFG_DFD_JTAG_TDO (MTK_PIN_NO(85) | 5) -#define PINMUX_GPIO85__FUNC_DFD_TDO (MTK_PIN_NO(85) | 6) -#define PINMUX_GPIO85__FUNC_JTDO_SEL1 (MTK_PIN_NO(85) | 7) - -#define PINMUX_GPIO86__FUNC_GPIO86 (MTK_PIN_NO(86) | 0) -#define PINMUX_GPIO86__FUNC_SPI0_CSB (MTK_PIN_NO(86) | 1) -#define PINMUX_GPIO86__FUNC_SCP_SPI0_CS (MTK_PIN_NO(86) | 2) -#define PINMUX_GPIO86__FUNC_CLKM0 (MTK_PIN_NO(86) | 3) -#define PINMUX_GPIO86__FUNC_I2S1_LRCK (MTK_PIN_NO(86) | 4) -#define PINMUX_GPIO86__FUNC_MFG_DFD_JTAG_TMS (MTK_PIN_NO(86) | 5) -#define PINMUX_GPIO86__FUNC_DFD_TMS (MTK_PIN_NO(86) | 6) -#define PINMUX_GPIO86__FUNC_JTMS_SEL1 (MTK_PIN_NO(86) | 7) - -#define PINMUX_GPIO87__FUNC_GPIO87 (MTK_PIN_NO(87) | 0) -#define PINMUX_GPIO87__FUNC_SPI0_MO (MTK_PIN_NO(87) | 1) -#define PINMUX_GPIO87__FUNC_SCP_SPI0_MO (MTK_PIN_NO(87) | 2) -#define PINMUX_GPIO87__FUNC_SDA1 (MTK_PIN_NO(87) | 3) -#define PINMUX_GPIO87__FUNC_I2S1_DO (MTK_PIN_NO(87) | 4) -#define PINMUX_GPIO87__FUNC_MFG_DFD_JTAG_TDI (MTK_PIN_NO(87) | 5) -#define PINMUX_GPIO87__FUNC_DFD_TDI (MTK_PIN_NO(87) | 6) -#define PINMUX_GPIO87__FUNC_JTDI_SEL1 (MTK_PIN_NO(87) | 7) - -#define PINMUX_GPIO88__FUNC_GPIO88 (MTK_PIN_NO(88) | 0) -#define PINMUX_GPIO88__FUNC_SPI0_CLK (MTK_PIN_NO(88) | 1) -#define PINMUX_GPIO88__FUNC_SCP_SPI0_CK (MTK_PIN_NO(88) | 2) -#define PINMUX_GPIO88__FUNC_SCL1 (MTK_PIN_NO(88) | 3) -#define PINMUX_GPIO88__FUNC_I2S1_MCK (MTK_PIN_NO(88) | 4) -#define PINMUX_GPIO88__FUNC_MFG_DFD_JTAG_TCK (MTK_PIN_NO(88) | 5) -#define PINMUX_GPIO88__FUNC_DFD_TCK_XI (MTK_PIN_NO(88) | 6) -#define PINMUX_GPIO88__FUNC_JTCK_SEL1 (MTK_PIN_NO(88) | 7) - -#define PINMUX_GPIO89__FUNC_GPIO89 (MTK_PIN_NO(89) | 0) -#define PINMUX_GPIO89__FUNC_SRCLKENAI0 (MTK_PIN_NO(89) | 1) -#define PINMUX_GPIO89__FUNC_PWM_C (MTK_PIN_NO(89) | 2) -#define PINMUX_GPIO89__FUNC_I2S5_BCK (MTK_PIN_NO(89) | 3) -#define PINMUX_GPIO89__FUNC_ANT_SEL6 (MTK_PIN_NO(89) | 4) -#define PINMUX_GPIO89__FUNC_SDA8 (MTK_PIN_NO(89) | 5) -#define PINMUX_GPIO89__FUNC_CMVREF0 (MTK_PIN_NO(89) | 6) -#define PINMUX_GPIO89__FUNC_DBG_MON_A21 (MTK_PIN_NO(89) | 7) - -#define PINMUX_GPIO90__FUNC_GPIO90 (MTK_PIN_NO(90) | 0) -#define PINMUX_GPIO90__FUNC_PWM_A (MTK_PIN_NO(90) | 1) -#define PINMUX_GPIO90__FUNC_CMMCLK2 (MTK_PIN_NO(90) | 2) -#define PINMUX_GPIO90__FUNC_I2S5_LRCK (MTK_PIN_NO(90) | 3) -#define PINMUX_GPIO90__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(90) | 4) -#define PINMUX_GPIO90__FUNC_SCL8 (MTK_PIN_NO(90) | 5) -#define PINMUX_GPIO90__FUNC_PTA_RXD (MTK_PIN_NO(90) | 6) -#define PINMUX_GPIO90__FUNC_DBG_MON_A22 (MTK_PIN_NO(90) | 7) - -#define PINMUX_GPIO91__FUNC_GPIO91 (MTK_PIN_NO(91) | 0) -#define PINMUX_GPIO91__FUNC_KPROW1 (MTK_PIN_NO(91) | 1) -#define PINMUX_GPIO91__FUNC_PWM_B (MTK_PIN_NO(91) | 2) -#define PINMUX_GPIO91__FUNC_I2S5_DO (MTK_PIN_NO(91) | 3) -#define PINMUX_GPIO91__FUNC_ANT_SEL7 (MTK_PIN_NO(91) | 4) -#define PINMUX_GPIO91__FUNC_CMMCLK3 (MTK_PIN_NO(91) | 5) -#define PINMUX_GPIO91__FUNC_PTA_TXD (MTK_PIN_NO(91) | 6) - -#define PINMUX_GPIO92__FUNC_GPIO92 (MTK_PIN_NO(92) | 0) -#define PINMUX_GPIO92__FUNC_KPROW0 (MTK_PIN_NO(92) | 1) - -#define PINMUX_GPIO93__FUNC_GPIO93 (MTK_PIN_NO(93) | 0) -#define PINMUX_GPIO93__FUNC_KPCOL0 (MTK_PIN_NO(93) | 1) -#define PINMUX_GPIO93__FUNC_DBG_MON_B27 (MTK_PIN_NO(93) | 7) - -#define PINMUX_GPIO94__FUNC_GPIO94 (MTK_PIN_NO(94) | 0) -#define PINMUX_GPIO94__FUNC_KPCOL1 (MTK_PIN_NO(94) | 1) -#define PINMUX_GPIO94__FUNC_I2S2_DI2 (MTK_PIN_NO(94) | 2) -#define PINMUX_GPIO94__FUNC_I2S5_MCK (MTK_PIN_NO(94) | 3) -#define PINMUX_GPIO94__FUNC_CMMCLK2 (MTK_PIN_NO(94) | 4) -#define PINMUX_GPIO94__FUNC_SCP_SPI2_MI (MTK_PIN_NO(94) | 5) -#define PINMUX_GPIO94__FUNC_SRCLKENAI1 (MTK_PIN_NO(94) | 6) -#define PINMUX_GPIO94__FUNC_SPI2_MI (MTK_PIN_NO(94) | 7) - -#define PINMUX_GPIO95__FUNC_GPIO95 (MTK_PIN_NO(95) | 0) -#define PINMUX_GPIO95__FUNC_URXD0 (MTK_PIN_NO(95) | 1) -#define PINMUX_GPIO95__FUNC_UTXD0 (MTK_PIN_NO(95) | 2) -#define PINMUX_GPIO95__FUNC_MD_URXD0 (MTK_PIN_NO(95) | 3) -#define PINMUX_GPIO95__FUNC_MD_URXD1 (MTK_PIN_NO(95) | 4) -#define PINMUX_GPIO95__FUNC_SSPM_URXD_AO (MTK_PIN_NO(95) | 5) -#define PINMUX_GPIO95__FUNC_CCU_URXD_AO (MTK_PIN_NO(95) | 6) - -#define PINMUX_GPIO96__FUNC_GPIO96 (MTK_PIN_NO(96) | 0) -#define PINMUX_GPIO96__FUNC_UTXD0 (MTK_PIN_NO(96) | 1) -#define PINMUX_GPIO96__FUNC_URXD0 (MTK_PIN_NO(96) | 2) -#define PINMUX_GPIO96__FUNC_MD_UTXD0 (MTK_PIN_NO(96) | 3) -#define PINMUX_GPIO96__FUNC_MD_UTXD1 (MTK_PIN_NO(96) | 4) -#define PINMUX_GPIO96__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(96) | 5) -#define PINMUX_GPIO96__FUNC_CCU_UTXD_AO (MTK_PIN_NO(96) | 6) -#define PINMUX_GPIO96__FUNC_DBG_MON_B2 (MTK_PIN_NO(96) | 7) - -#define PINMUX_GPIO97__FUNC_GPIO97 (MTK_PIN_NO(97) | 0) -#define PINMUX_GPIO97__FUNC_UCTS0 (MTK_PIN_NO(97) | 1) -#define PINMUX_GPIO97__FUNC_I2S2_MCK (MTK_PIN_NO(97) | 2) -#define PINMUX_GPIO97__FUNC_IDDIG (MTK_PIN_NO(97) | 3) -#define PINMUX_GPIO97__FUNC_CONN_MCU_TDO (MTK_PIN_NO(97) | 4) -#define PINMUX_GPIO97__FUNC_SSPM_JTAG_TDO (MTK_PIN_NO(97) | 5) -#define PINMUX_GPIO97__FUNC_IO_JTAG_TDO (MTK_PIN_NO(97) | 6) -#define PINMUX_GPIO97__FUNC_DBG_MON_B3 (MTK_PIN_NO(97) | 7) - -#define PINMUX_GPIO98__FUNC_GPIO98 (MTK_PIN_NO(98) | 0) -#define PINMUX_GPIO98__FUNC_URTS0 (MTK_PIN_NO(98) | 1) -#define PINMUX_GPIO98__FUNC_I2S2_BCK (MTK_PIN_NO(98) | 2) -#define PINMUX_GPIO98__FUNC_USB_DRVVBUS (MTK_PIN_NO(98) | 3) -#define PINMUX_GPIO98__FUNC_CONN_MCU_TMS (MTK_PIN_NO(98) | 4) -#define PINMUX_GPIO98__FUNC_SSPM_JTAG_TMS (MTK_PIN_NO(98) | 5) -#define PINMUX_GPIO98__FUNC_IO_JTAG_TMS (MTK_PIN_NO(98) | 6) -#define PINMUX_GPIO98__FUNC_DBG_MON_B4 (MTK_PIN_NO(98) | 7) - -#define PINMUX_GPIO99__FUNC_GPIO99 (MTK_PIN_NO(99) | 0) -#define PINMUX_GPIO99__FUNC_CMMCLK0 (MTK_PIN_NO(99) | 1) -#define PINMUX_GPIO99__FUNC_CONN_MCU_AICE_TMSC (MTK_PIN_NO(99) | 4) -#define PINMUX_GPIO99__FUNC_DBG_MON_B28 (MTK_PIN_NO(99) | 7) - -#define PINMUX_GPIO100__FUNC_GPIO100 (MTK_PIN_NO(100) | 0) -#define PINMUX_GPIO100__FUNC_CMMCLK1 (MTK_PIN_NO(100) | 1) -#define PINMUX_GPIO100__FUNC_PWM_C (MTK_PIN_NO(100) | 2) -#define PINMUX_GPIO100__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(100) | 3) -#define PINMUX_GPIO100__FUNC_CONN_MCU_AICE_TCKC (MTK_PIN_NO(100) | 4) -#define PINMUX_GPIO100__FUNC_DBG_MON_B29 (MTK_PIN_NO(100) | 7) - -#define PINMUX_GPIO101__FUNC_GPIO101 (MTK_PIN_NO(101) | 0) -#define PINMUX_GPIO101__FUNC_CLKM2 (MTK_PIN_NO(101) | 1) -#define PINMUX_GPIO101__FUNC_I2S2_LRCK (MTK_PIN_NO(101) | 2) -#define PINMUX_GPIO101__FUNC_CMVREF1 (MTK_PIN_NO(101) | 3) -#define PINMUX_GPIO101__FUNC_CONN_MCU_TCK (MTK_PIN_NO(101) | 4) -#define PINMUX_GPIO101__FUNC_SSPM_JTAG_TCK (MTK_PIN_NO(101) | 5) -#define PINMUX_GPIO101__FUNC_IO_JTAG_TCK (MTK_PIN_NO(101) | 6) - -#define PINMUX_GPIO102__FUNC_GPIO102 (MTK_PIN_NO(102) | 0) -#define PINMUX_GPIO102__FUNC_CLKM1 (MTK_PIN_NO(102) | 1) -#define PINMUX_GPIO102__FUNC_I2S2_DI (MTK_PIN_NO(102) | 2) -#define PINMUX_GPIO102__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(102) | 3) -#define PINMUX_GPIO102__FUNC_CONN_MCU_TDI (MTK_PIN_NO(102) | 4) -#define PINMUX_GPIO102__FUNC_SSPM_JTAG_TDI (MTK_PIN_NO(102) | 5) -#define PINMUX_GPIO102__FUNC_IO_JTAG_TDI (MTK_PIN_NO(102) | 6) -#define PINMUX_GPIO102__FUNC_DBG_MON_B8 (MTK_PIN_NO(102) | 7) - -#define PINMUX_GPIO103__FUNC_GPIO103 (MTK_PIN_NO(103) | 0) -#define PINMUX_GPIO103__FUNC_SCL2 (MTK_PIN_NO(103) | 1) - -#define PINMUX_GPIO104__FUNC_GPIO104 (MTK_PIN_NO(104) | 0) -#define PINMUX_GPIO104__FUNC_SDA2 (MTK_PIN_NO(104) | 1) - -#define PINMUX_GPIO105__FUNC_GPIO105 (MTK_PIN_NO(105) | 0) -#define PINMUX_GPIO105__FUNC_SCL4 (MTK_PIN_NO(105) | 1) - -#define PINMUX_GPIO106__FUNC_GPIO106 (MTK_PIN_NO(106) | 0) -#define PINMUX_GPIO106__FUNC_SDA4 (MTK_PIN_NO(106) | 1) - -#define PINMUX_GPIO107__FUNC_GPIO107 (MTK_PIN_NO(107) | 0) -#define PINMUX_GPIO107__FUNC_DMIC_CLK (MTK_PIN_NO(107) | 1) -#define PINMUX_GPIO107__FUNC_ANT_SEL0 (MTK_PIN_NO(107) | 2) -#define PINMUX_GPIO107__FUNC_CLKM0 (MTK_PIN_NO(107) | 3) -#define PINMUX_GPIO107__FUNC_SDA7 (MTK_PIN_NO(107) | 4) -#define PINMUX_GPIO107__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(107) | 5) -#define PINMUX_GPIO107__FUNC_PWM_A (MTK_PIN_NO(107) | 6) -#define PINMUX_GPIO107__FUNC_DBG_MON_B12 (MTK_PIN_NO(107) | 7) - -#define PINMUX_GPIO108__FUNC_GPIO108 (MTK_PIN_NO(108) | 0) -#define PINMUX_GPIO108__FUNC_CMMCLK2 (MTK_PIN_NO(108) | 1) -#define PINMUX_GPIO108__FUNC_ANT_SEL1 (MTK_PIN_NO(108) | 2) -#define PINMUX_GPIO108__FUNC_CLKM1 (MTK_PIN_NO(108) | 3) -#define PINMUX_GPIO108__FUNC_SCL8 (MTK_PIN_NO(108) | 4) -#define PINMUX_GPIO108__FUNC_DAP_MD32_SWD (MTK_PIN_NO(108) | 5) -#define PINMUX_GPIO108__FUNC_PWM_B (MTK_PIN_NO(108) | 6) -#define PINMUX_GPIO108__FUNC_DBG_MON_B13 (MTK_PIN_NO(108) | 7) - -#define PINMUX_GPIO109__FUNC_GPIO109 (MTK_PIN_NO(109) | 0) -#define PINMUX_GPIO109__FUNC_DMIC_DAT (MTK_PIN_NO(109) | 1) -#define PINMUX_GPIO109__FUNC_ANT_SEL2 (MTK_PIN_NO(109) | 2) -#define PINMUX_GPIO109__FUNC_CLKM2 (MTK_PIN_NO(109) | 3) -#define PINMUX_GPIO109__FUNC_SDA8 (MTK_PIN_NO(109) | 4) -#define PINMUX_GPIO109__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(109) | 5) -#define PINMUX_GPIO109__FUNC_PWM_C (MTK_PIN_NO(109) | 6) -#define PINMUX_GPIO109__FUNC_DBG_MON_B14 (MTK_PIN_NO(109) | 7) - -#define PINMUX_GPIO110__FUNC_GPIO110 (MTK_PIN_NO(110) | 0) -#define PINMUX_GPIO110__FUNC_SCL7 (MTK_PIN_NO(110) | 1) -#define PINMUX_GPIO110__FUNC_ANT_SEL0 (MTK_PIN_NO(110) | 2) -#define PINMUX_GPIO110__FUNC_TP_URXD1_AO (MTK_PIN_NO(110) | 3) -#define PINMUX_GPIO110__FUNC_USB_DRVVBUS (MTK_PIN_NO(110) | 4) -#define PINMUX_GPIO110__FUNC_SRCLKENAI1 (MTK_PIN_NO(110) | 5) -#define PINMUX_GPIO110__FUNC_KPCOL2 (MTK_PIN_NO(110) | 6) -#define PINMUX_GPIO110__FUNC_URXD1 (MTK_PIN_NO(110) | 7) - -#define PINMUX_GPIO111__FUNC_GPIO111 (MTK_PIN_NO(111) | 0) -#define PINMUX_GPIO111__FUNC_CMMCLK3 (MTK_PIN_NO(111) | 1) -#define PINMUX_GPIO111__FUNC_ANT_SEL1 (MTK_PIN_NO(111) | 2) -#define PINMUX_GPIO111__FUNC_SRCLKENAI0 (MTK_PIN_NO(111) | 3) -#define PINMUX_GPIO111__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(111) | 4) -#define PINMUX_GPIO111__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(111) | 5) -#define PINMUX_GPIO111__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(111) | 7) - -#define PINMUX_GPIO112__FUNC_GPIO112 (MTK_PIN_NO(112) | 0) -#define PINMUX_GPIO112__FUNC_SDA7 (MTK_PIN_NO(112) | 1) -#define PINMUX_GPIO112__FUNC_ANT_SEL2 (MTK_PIN_NO(112) | 2) -#define PINMUX_GPIO112__FUNC_TP_UTXD1_AO (MTK_PIN_NO(112) | 3) -#define PINMUX_GPIO112__FUNC_IDDIG (MTK_PIN_NO(112) | 4) -#define PINMUX_GPIO112__FUNC_AGPS_SYNC (MTK_PIN_NO(112) | 5) -#define PINMUX_GPIO112__FUNC_KPROW2 (MTK_PIN_NO(112) | 6) -#define PINMUX_GPIO112__FUNC_UTXD1 (MTK_PIN_NO(112) | 7) - -#define PINMUX_GPIO113__FUNC_GPIO113 (MTK_PIN_NO(113) | 0) -#define PINMUX_GPIO113__FUNC_CONN_TOP_CLK (MTK_PIN_NO(113) | 1) -#define PINMUX_GPIO113__FUNC_SCL6 (MTK_PIN_NO(113) | 3) -#define PINMUX_GPIO113__FUNC_AUXIF_CLK0 (MTK_PIN_NO(113) | 4) -#define PINMUX_GPIO113__FUNC_TP_UCTS1_AO (MTK_PIN_NO(113) | 6) - -#define PINMUX_GPIO114__FUNC_GPIO114 (MTK_PIN_NO(114) | 0) -#define PINMUX_GPIO114__FUNC_CONN_TOP_DATA (MTK_PIN_NO(114) | 1) -#define PINMUX_GPIO114__FUNC_SDA6 (MTK_PIN_NO(114) | 3) -#define PINMUX_GPIO114__FUNC_AUXIF_ST0 (MTK_PIN_NO(114) | 4) -#define PINMUX_GPIO114__FUNC_TP_URTS1_AO (MTK_PIN_NO(114) | 6) - -#define PINMUX_GPIO115__FUNC_GPIO115 (MTK_PIN_NO(115) | 0) -#define PINMUX_GPIO115__FUNC_CONN_BT_CLK (MTK_PIN_NO(115) | 1) -#define PINMUX_GPIO115__FUNC_UTXD1 (MTK_PIN_NO(115) | 2) -#define PINMUX_GPIO115__FUNC_PTA_TXD (MTK_PIN_NO(115) | 3) -#define PINMUX_GPIO115__FUNC_AUXIF_CLK1 (MTK_PIN_NO(115) | 4) -#define PINMUX_GPIO115__FUNC_DAP_MD32_SWD (MTK_PIN_NO(115) | 5) -#define PINMUX_GPIO115__FUNC_TP_UTXD1_AO (MTK_PIN_NO(115) | 6) - -#define PINMUX_GPIO116__FUNC_GPIO116 (MTK_PIN_NO(116) | 0) -#define PINMUX_GPIO116__FUNC_CONN_BT_DATA (MTK_PIN_NO(116) | 1) -#define PINMUX_GPIO116__FUNC_IPU_JTAG_TRST (MTK_PIN_NO(116) | 2) -#define PINMUX_GPIO116__FUNC_AUXIF_ST1 (MTK_PIN_NO(116) | 4) -#define PINMUX_GPIO116__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(116) | 5) -#define PINMUX_GPIO116__FUNC_TP_URXD2_AO (MTK_PIN_NO(116) | 6) -#define PINMUX_GPIO116__FUNC_DBG_MON_A0 (MTK_PIN_NO(116) | 7) - -#define PINMUX_GPIO117__FUNC_GPIO117 (MTK_PIN_NO(117) | 0) -#define PINMUX_GPIO117__FUNC_CONN_WF_HB0 (MTK_PIN_NO(117) | 1) -#define PINMUX_GPIO117__FUNC_IPU_JTAG_TDO (MTK_PIN_NO(117) | 2) -#define PINMUX_GPIO117__FUNC_TP_UTXD2_AO (MTK_PIN_NO(117) | 6) -#define PINMUX_GPIO117__FUNC_DBG_MON_A4 (MTK_PIN_NO(117) | 7) - -#define PINMUX_GPIO118__FUNC_GPIO118 (MTK_PIN_NO(118) | 0) -#define PINMUX_GPIO118__FUNC_CONN_WF_HB1 (MTK_PIN_NO(118) | 1) -#define PINMUX_GPIO118__FUNC_IPU_JTAG_TDI (MTK_PIN_NO(118) | 2) -#define PINMUX_GPIO118__FUNC_SSPM_URXD_AO (MTK_PIN_NO(118) | 5) -#define PINMUX_GPIO118__FUNC_TP_UCTS2_AO (MTK_PIN_NO(118) | 6) -#define PINMUX_GPIO118__FUNC_DBG_MON_A5 (MTK_PIN_NO(118) | 7) - -#define PINMUX_GPIO119__FUNC_GPIO119 (MTK_PIN_NO(119) | 0) -#define PINMUX_GPIO119__FUNC_CONN_WF_HB2 (MTK_PIN_NO(119) | 1) -#define PINMUX_GPIO119__FUNC_IPU_JTAG_TCK (MTK_PIN_NO(119) | 2) -#define PINMUX_GPIO119__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(119) | 5) -#define PINMUX_GPIO119__FUNC_TP_URTS2_AO (MTK_PIN_NO(119) | 6) - -#define PINMUX_GPIO120__FUNC_GPIO120 (MTK_PIN_NO(120) | 0) -#define PINMUX_GPIO120__FUNC_CONN_WB_PTA (MTK_PIN_NO(120) | 1) -#define PINMUX_GPIO120__FUNC_IPU_JTAG_TMS (MTK_PIN_NO(120) | 2) -#define PINMUX_GPIO120__FUNC_CCU_URXD_AO (MTK_PIN_NO(120) | 5) - -#define PINMUX_GPIO121__FUNC_GPIO121 (MTK_PIN_NO(121) | 0) -#define PINMUX_GPIO121__FUNC_CONN_HRST_B (MTK_PIN_NO(121) | 1) -#define PINMUX_GPIO121__FUNC_URXD1 (MTK_PIN_NO(121) | 2) -#define PINMUX_GPIO121__FUNC_PTA_RXD (MTK_PIN_NO(121) | 3) -#define PINMUX_GPIO121__FUNC_CCU_UTXD_AO (MTK_PIN_NO(121) | 5) -#define PINMUX_GPIO121__FUNC_TP_URXD1_AO (MTK_PIN_NO(121) | 6) - -#define PINMUX_GPIO122__FUNC_GPIO122 (MTK_PIN_NO(122) | 0) -#define PINMUX_GPIO122__FUNC_MSDC0_CMD (MTK_PIN_NO(122) | 1) -#define PINMUX_GPIO122__FUNC_SSPM_URXD2_AO (MTK_PIN_NO(122) | 2) -#define PINMUX_GPIO122__FUNC_ANT_SEL1 (MTK_PIN_NO(122) | 3) -#define PINMUX_GPIO122__FUNC_DBG_MON_A12 (MTK_PIN_NO(122) | 7) - -#define PINMUX_GPIO123__FUNC_GPIO123 (MTK_PIN_NO(123) | 0) -#define PINMUX_GPIO123__FUNC_MSDC0_DAT0 (MTK_PIN_NO(123) | 1) -#define PINMUX_GPIO123__FUNC_ANT_SEL0 (MTK_PIN_NO(123) | 3) -#define PINMUX_GPIO123__FUNC_DBG_MON_A13 (MTK_PIN_NO(123) | 7) - -#define PINMUX_GPIO124__FUNC_GPIO124 (MTK_PIN_NO(124) | 0) -#define PINMUX_GPIO124__FUNC_MSDC0_CLK (MTK_PIN_NO(124) | 1) -#define PINMUX_GPIO124__FUNC_DBG_MON_A14 (MTK_PIN_NO(124) | 7) - -#define PINMUX_GPIO125__FUNC_GPIO125 (MTK_PIN_NO(125) | 0) -#define PINMUX_GPIO125__FUNC_MSDC0_DAT2 (MTK_PIN_NO(125) | 1) -#define PINMUX_GPIO125__FUNC_MRG_CLK (MTK_PIN_NO(125) | 3) -#define PINMUX_GPIO125__FUNC_DBG_MON_A15 (MTK_PIN_NO(125) | 7) - -#define PINMUX_GPIO126__FUNC_GPIO126 (MTK_PIN_NO(126) | 0) -#define PINMUX_GPIO126__FUNC_MSDC0_DAT4 (MTK_PIN_NO(126) | 1) -#define PINMUX_GPIO126__FUNC_ANT_SEL5 (MTK_PIN_NO(126) | 3) -#define PINMUX_GPIO126__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(126) | 6) -#define PINMUX_GPIO126__FUNC_DBG_MON_A16 (MTK_PIN_NO(126) | 7) - -#define PINMUX_GPIO127__FUNC_GPIO127 (MTK_PIN_NO(127) | 0) -#define PINMUX_GPIO127__FUNC_MSDC0_DAT6 (MTK_PIN_NO(127) | 1) -#define PINMUX_GPIO127__FUNC_ANT_SEL4 (MTK_PIN_NO(127) | 3) -#define PINMUX_GPIO127__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(127) | 6) -#define PINMUX_GPIO127__FUNC_DBG_MON_A17 (MTK_PIN_NO(127) | 7) - -#define PINMUX_GPIO128__FUNC_GPIO128 (MTK_PIN_NO(128) | 0) -#define PINMUX_GPIO128__FUNC_MSDC0_DAT1 (MTK_PIN_NO(128) | 1) -#define PINMUX_GPIO128__FUNC_ANT_SEL2 (MTK_PIN_NO(128) | 3) -#define PINMUX_GPIO128__FUNC_UFS_UNIPRO_SDA (MTK_PIN_NO(128) | 6) -#define PINMUX_GPIO128__FUNC_DBG_MON_A18 (MTK_PIN_NO(128) | 7) - -#define PINMUX_GPIO129__FUNC_GPIO129 (MTK_PIN_NO(129) | 0) -#define PINMUX_GPIO129__FUNC_MSDC0_DAT5 (MTK_PIN_NO(129) | 1) -#define PINMUX_GPIO129__FUNC_ANT_SEL3 (MTK_PIN_NO(129) | 3) -#define PINMUX_GPIO129__FUNC_UFS_UNIPRO_SCL (MTK_PIN_NO(129) | 6) -#define PINMUX_GPIO129__FUNC_DBG_MON_A23 (MTK_PIN_NO(129) | 7) - -#define PINMUX_GPIO130__FUNC_GPIO130 (MTK_PIN_NO(130) | 0) -#define PINMUX_GPIO130__FUNC_MSDC0_DAT7 (MTK_PIN_NO(130) | 1) -#define PINMUX_GPIO130__FUNC_MRG_DO (MTK_PIN_NO(130) | 3) -#define PINMUX_GPIO130__FUNC_DBG_MON_A24 (MTK_PIN_NO(130) | 7) - -#define PINMUX_GPIO131__FUNC_GPIO131 (MTK_PIN_NO(131) | 0) -#define PINMUX_GPIO131__FUNC_MSDC0_DSL (MTK_PIN_NO(131) | 1) -#define PINMUX_GPIO131__FUNC_MRG_SYNC (MTK_PIN_NO(131) | 3) -#define PINMUX_GPIO131__FUNC_DBG_MON_A25 (MTK_PIN_NO(131) | 7) - -#define PINMUX_GPIO132__FUNC_GPIO132 (MTK_PIN_NO(132) | 0) -#define PINMUX_GPIO132__FUNC_MSDC0_DAT3 (MTK_PIN_NO(132) | 1) -#define PINMUX_GPIO132__FUNC_MRG_DI (MTK_PIN_NO(132) | 3) -#define PINMUX_GPIO132__FUNC_DBG_MON_A26 (MTK_PIN_NO(132) | 7) - -#define PINMUX_GPIO133__FUNC_GPIO133 (MTK_PIN_NO(133) | 0) -#define PINMUX_GPIO133__FUNC_MSDC0_RSTB (MTK_PIN_NO(133) | 1) -#define PINMUX_GPIO133__FUNC_AGPS_SYNC (MTK_PIN_NO(133) | 3) -#define PINMUX_GPIO133__FUNC_DBG_MON_A27 (MTK_PIN_NO(133) | 7) - -#define PINMUX_GPIO134__FUNC_GPIO134 (MTK_PIN_NO(134) | 0) -#define PINMUX_GPIO134__FUNC_RTC32K_CK (MTK_PIN_NO(134) | 1) - -#define PINMUX_GPIO135__FUNC_GPIO135 (MTK_PIN_NO(135) | 0) -#define PINMUX_GPIO135__FUNC_WATCHDOG (MTK_PIN_NO(135) | 1) - -#define PINMUX_GPIO136__FUNC_GPIO136 (MTK_PIN_NO(136) | 0) -#define PINMUX_GPIO136__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(136) | 1) -#define PINMUX_GPIO136__FUNC_AUD_CLK_MISO (MTK_PIN_NO(136) | 2) -#define PINMUX_GPIO136__FUNC_I2S1_MCK (MTK_PIN_NO(136) | 3) -#define PINMUX_GPIO136__FUNC_UFS_UNIPRO_SCL (MTK_PIN_NO(136) | 6) - -#define PINMUX_GPIO137__FUNC_GPIO137 (MTK_PIN_NO(137) | 0) -#define PINMUX_GPIO137__FUNC_AUD_SYNC_MOSI (MTK_PIN_NO(137) | 1) -#define PINMUX_GPIO137__FUNC_AUD_SYNC_MISO (MTK_PIN_NO(137) | 2) -#define PINMUX_GPIO137__FUNC_I2S1_BCK (MTK_PIN_NO(137) | 3) - -#define PINMUX_GPIO138__FUNC_GPIO138 (MTK_PIN_NO(138) | 0) -#define PINMUX_GPIO138__FUNC_AUD_DAT_MOSI0 (MTK_PIN_NO(138) | 1) -#define PINMUX_GPIO138__FUNC_AUD_DAT_MISO0 (MTK_PIN_NO(138) | 2) -#define PINMUX_GPIO138__FUNC_I2S1_LRCK (MTK_PIN_NO(138) | 3) -#define PINMUX_GPIO138__FUNC_DBG_MON_B24 (MTK_PIN_NO(138) | 7) - -#define PINMUX_GPIO139__FUNC_GPIO139 (MTK_PIN_NO(139) | 0) -#define PINMUX_GPIO139__FUNC_AUD_DAT_MOSI1 (MTK_PIN_NO(139) | 1) -#define PINMUX_GPIO139__FUNC_AUD_DAT_MISO1 (MTK_PIN_NO(139) | 2) -#define PINMUX_GPIO139__FUNC_I2S1_DO (MTK_PIN_NO(139) | 3) -#define PINMUX_GPIO139__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(139) | 6) - -#define PINMUX_GPIO140__FUNC_GPIO140 (MTK_PIN_NO(140) | 0) -#define PINMUX_GPIO140__FUNC_AUD_CLK_MISO (MTK_PIN_NO(140) | 1) -#define PINMUX_GPIO140__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(140) | 2) -#define PINMUX_GPIO140__FUNC_I2S0_MCK (MTK_PIN_NO(140) | 3) -#define PINMUX_GPIO140__FUNC_UFS_UNIPRO_SDA (MTK_PIN_NO(140) | 6) - -#define PINMUX_GPIO141__FUNC_GPIO141 (MTK_PIN_NO(141) | 0) -#define PINMUX_GPIO141__FUNC_AUD_SYNC_MISO (MTK_PIN_NO(141) | 1) -#define PINMUX_GPIO141__FUNC_AUD_SYNC_MOSI (MTK_PIN_NO(141) | 2) -#define PINMUX_GPIO141__FUNC_I2S0_BCK (MTK_PIN_NO(141) | 3) - -#define PINMUX_GPIO142__FUNC_GPIO142 (MTK_PIN_NO(142) | 0) -#define PINMUX_GPIO142__FUNC_AUD_DAT_MISO0 (MTK_PIN_NO(142) | 1) -#define PINMUX_GPIO142__FUNC_AUD_DAT_MOSI0 (MTK_PIN_NO(142) | 2) -#define PINMUX_GPIO142__FUNC_I2S0_LRCK (MTK_PIN_NO(142) | 3) -#define PINMUX_GPIO142__FUNC_VOW_DAT_MISO (MTK_PIN_NO(142) | 4) -#define PINMUX_GPIO142__FUNC_DBG_MON_B25 (MTK_PIN_NO(142) | 7) - -#define PINMUX_GPIO143__FUNC_GPIO143 (MTK_PIN_NO(143) | 0) -#define PINMUX_GPIO143__FUNC_AUD_DAT_MISO1 (MTK_PIN_NO(143) | 1) -#define PINMUX_GPIO143__FUNC_AUD_DAT_MOSI1 (MTK_PIN_NO(143) | 2) -#define PINMUX_GPIO143__FUNC_I2S0_DI (MTK_PIN_NO(143) | 3) -#define PINMUX_GPIO143__FUNC_VOW_CLK_MISO (MTK_PIN_NO(143) | 4) -#define PINMUX_GPIO143__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(143) | 6) -#define PINMUX_GPIO143__FUNC_DBG_MON_B26 (MTK_PIN_NO(143) | 7) - -#define PINMUX_GPIO144__FUNC_GPIO144 (MTK_PIN_NO(144) | 0) -#define PINMUX_GPIO144__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(144) | 1) -#define PINMUX_GPIO144__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(144) | 2) - -#define PINMUX_GPIO145__FUNC_GPIO145 (MTK_PIN_NO(145) | 0) -#define PINMUX_GPIO145__FUNC_PWRAP_SPI0_CSN (MTK_PIN_NO(145) | 1) - -#define PINMUX_GPIO146__FUNC_GPIO146 (MTK_PIN_NO(146) | 0) -#define PINMUX_GPIO146__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(146) | 1) -#define PINMUX_GPIO146__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(146) | 2) - -#define PINMUX_GPIO147__FUNC_GPIO147 (MTK_PIN_NO(147) | 0) -#define PINMUX_GPIO147__FUNC_PWRAP_SPI0_CK (MTK_PIN_NO(147) | 1) - -#define PINMUX_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0) -#define PINMUX_GPIO148__FUNC_SRCLKENA0 (MTK_PIN_NO(148) | 1) - -#define PINMUX_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0) -#define PINMUX_GPIO149__FUNC_SRCLKENA1 (MTK_PIN_NO(149) | 1) - -#define PINMUX_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0) -#define PINMUX_GPIO150__FUNC_PWM_A (MTK_PIN_NO(150) | 1) -#define PINMUX_GPIO150__FUNC_CMFLASH (MTK_PIN_NO(150) | 2) -#define PINMUX_GPIO150__FUNC_CLKM0 (MTK_PIN_NO(150) | 3) -#define PINMUX_GPIO150__FUNC_DBG_MON_B30 (MTK_PIN_NO(150) | 7) - -#define PINMUX_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0) -#define PINMUX_GPIO151__FUNC_PWM_B (MTK_PIN_NO(151) | 1) -#define PINMUX_GPIO151__FUNC_CMVREF0 (MTK_PIN_NO(151) | 2) -#define PINMUX_GPIO151__FUNC_CLKM1 (MTK_PIN_NO(151) | 3) -#define PINMUX_GPIO151__FUNC_DBG_MON_B20 (MTK_PIN_NO(151) | 7) - -#define PINMUX_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0) -#define PINMUX_GPIO152__FUNC_PWM_C (MTK_PIN_NO(152) | 1) -#define PINMUX_GPIO152__FUNC_CMFLASH (MTK_PIN_NO(152) | 2) -#define PINMUX_GPIO152__FUNC_CLKM2 (MTK_PIN_NO(152) | 3) -#define PINMUX_GPIO152__FUNC_DBG_MON_B21 (MTK_PIN_NO(152) | 7) - -#define PINMUX_GPIO153__FUNC_GPIO153 (MTK_PIN_NO(153) | 0) -#define PINMUX_GPIO153__FUNC_PWM_A (MTK_PIN_NO(153) | 1) -#define PINMUX_GPIO153__FUNC_CMVREF0 (MTK_PIN_NO(153) | 2) -#define PINMUX_GPIO153__FUNC_CLKM3 (MTK_PIN_NO(153) | 3) -#define PINMUX_GPIO153__FUNC_DBG_MON_B22 (MTK_PIN_NO(153) | 7) - -#define PINMUX_GPIO154__FUNC_GPIO154 (MTK_PIN_NO(154) | 0) -#define PINMUX_GPIO154__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(154) | 1) -#define PINMUX_GPIO154__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(154) | 2) -#define PINMUX_GPIO154__FUNC_DBG_MON_B18 (MTK_PIN_NO(154) | 7) - -#define PINMUX_GPIO155__FUNC_GPIO155 (MTK_PIN_NO(155) | 0) -#define PINMUX_GPIO155__FUNC_ANT_SEL0 (MTK_PIN_NO(155) | 1) -#define PINMUX_GPIO155__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(155) | 2) -#define PINMUX_GPIO155__FUNC_CMVREF1 (MTK_PIN_NO(155) | 3) -#define PINMUX_GPIO155__FUNC_SCP_JTAG_TDI (MTK_PIN_NO(155) | 7) - -#define PINMUX_GPIO156__FUNC_GPIO156 (MTK_PIN_NO(156) | 0) -#define PINMUX_GPIO156__FUNC_ANT_SEL1 (MTK_PIN_NO(156) | 1) -#define PINMUX_GPIO156__FUNC_SRCLKENAI0 (MTK_PIN_NO(156) | 2) -#define PINMUX_GPIO156__FUNC_SCL6 (MTK_PIN_NO(156) | 3) -#define PINMUX_GPIO156__FUNC_KPCOL2 (MTK_PIN_NO(156) | 4) -#define PINMUX_GPIO156__FUNC_IDDIG (MTK_PIN_NO(156) | 5) -#define PINMUX_GPIO156__FUNC_SCP_JTAG_TCK (MTK_PIN_NO(156) | 7) - -#define PINMUX_GPIO157__FUNC_GPIO157 (MTK_PIN_NO(157) | 0) -#define PINMUX_GPIO157__FUNC_ANT_SEL2 (MTK_PIN_NO(157) | 1) -#define PINMUX_GPIO157__FUNC_SRCLKENAI1 (MTK_PIN_NO(157) | 2) -#define PINMUX_GPIO157__FUNC_SDA6 (MTK_PIN_NO(157) | 3) -#define PINMUX_GPIO157__FUNC_KPROW2 (MTK_PIN_NO(157) | 4) -#define PINMUX_GPIO157__FUNC_USB_DRVVBUS (MTK_PIN_NO(157) | 5) -#define PINMUX_GPIO157__FUNC_SCP_JTAG_TRSTN (MTK_PIN_NO(157) | 7) - -#define PINMUX_GPIO158__FUNC_GPIO158 (MTK_PIN_NO(158) | 0) -#define PINMUX_GPIO158__FUNC_ANT_SEL3 (MTK_PIN_NO(158) | 1) - -#define PINMUX_GPIO159__FUNC_GPIO159 (MTK_PIN_NO(159) | 0) -#define PINMUX_GPIO159__FUNC_ANT_SEL4 (MTK_PIN_NO(159) | 1) - -#define PINMUX_GPIO160__FUNC_GPIO160 (MTK_PIN_NO(160) | 0) -#define PINMUX_GPIO160__FUNC_ANT_SEL5 (MTK_PIN_NO(160) | 1) - -#define PINMUX_GPIO161__FUNC_GPIO161 (MTK_PIN_NO(161) | 0) -#define PINMUX_GPIO161__FUNC_SPI1_A_MI (MTK_PIN_NO(161) | 1) -#define PINMUX_GPIO161__FUNC_SCP_SPI1_MI (MTK_PIN_NO(161) | 2) -#define PINMUX_GPIO161__FUNC_IDDIG (MTK_PIN_NO(161) | 3) -#define PINMUX_GPIO161__FUNC_ANT_SEL6 (MTK_PIN_NO(161) | 4) -#define PINMUX_GPIO161__FUNC_KPCOL2 (MTK_PIN_NO(161) | 5) -#define PINMUX_GPIO161__FUNC_PTA_RXD (MTK_PIN_NO(161) | 6) -#define PINMUX_GPIO161__FUNC_DBG_MON_B19 (MTK_PIN_NO(161) | 7) - -#define PINMUX_GPIO162__FUNC_GPIO162 (MTK_PIN_NO(162) | 0) -#define PINMUX_GPIO162__FUNC_SPI1_A_CSB (MTK_PIN_NO(162) | 1) -#define PINMUX_GPIO162__FUNC_SCP_SPI1_CS (MTK_PIN_NO(162) | 2) -#define PINMUX_GPIO162__FUNC_USB_DRVVBUS (MTK_PIN_NO(162) | 3) -#define PINMUX_GPIO162__FUNC_ANT_SEL5 (MTK_PIN_NO(162) | 4) -#define PINMUX_GPIO162__FUNC_KPROW2 (MTK_PIN_NO(162) | 5) -#define PINMUX_GPIO162__FUNC_PTA_TXD (MTK_PIN_NO(162) | 6) - -#define PINMUX_GPIO163__FUNC_GPIO163 (MTK_PIN_NO(163) | 0) -#define PINMUX_GPIO163__FUNC_SPI1_A_MO (MTK_PIN_NO(163) | 1) -#define PINMUX_GPIO163__FUNC_SCP_SPI1_MO (MTK_PIN_NO(163) | 2) -#define PINMUX_GPIO163__FUNC_SDA1 (MTK_PIN_NO(163) | 3) -#define PINMUX_GPIO163__FUNC_ANT_SEL4 (MTK_PIN_NO(163) | 4) -#define PINMUX_GPIO163__FUNC_CMMCLK2 (MTK_PIN_NO(163) | 5) -#define PINMUX_GPIO163__FUNC_DMIC_CLK (MTK_PIN_NO(163) | 6) - -#define PINMUX_GPIO164__FUNC_GPIO164 (MTK_PIN_NO(164) | 0) -#define PINMUX_GPIO164__FUNC_SPI1_A_CLK (MTK_PIN_NO(164) | 1) -#define PINMUX_GPIO164__FUNC_SCP_SPI1_CK (MTK_PIN_NO(164) | 2) -#define PINMUX_GPIO164__FUNC_SCL1 (MTK_PIN_NO(164) | 3) -#define PINMUX_GPIO164__FUNC_ANT_SEL3 (MTK_PIN_NO(164) | 4) -#define PINMUX_GPIO164__FUNC_CMMCLK3 (MTK_PIN_NO(164) | 5) -#define PINMUX_GPIO164__FUNC_DMIC_DAT (MTK_PIN_NO(164) | 6) - -#define PINMUX_GPIO165__FUNC_GPIO165 (MTK_PIN_NO(165) | 0) -#define PINMUX_GPIO165__FUNC_PWM_B (MTK_PIN_NO(165) | 1) -#define PINMUX_GPIO165__FUNC_CMMCLK2 (MTK_PIN_NO(165) | 2) -#define PINMUX_GPIO165__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(165) | 3) -#define PINMUX_GPIO165__FUNC_TDM_MCK_2ND (MTK_PIN_NO(165) | 6) -#define PINMUX_GPIO165__FUNC_SCP_JTAG_TDO (MTK_PIN_NO(165) | 7) - -#define PINMUX_GPIO166__FUNC_GPIO166 (MTK_PIN_NO(166) | 0) -#define PINMUX_GPIO166__FUNC_ANT_SEL6 (MTK_PIN_NO(166) | 1) - -#define PINMUX_GPIO167__FUNC_GPIO167 (MTK_PIN_NO(167) | 0) -#define PINMUX_GPIO167__FUNC_RFIC0_BSI_EN (MTK_PIN_NO(167) | 1) -#define PINMUX_GPIO167__FUNC_SPM_BSI_EN (MTK_PIN_NO(167) | 2) - -#define PINMUX_GPIO168__FUNC_GPIO168 (MTK_PIN_NO(168) | 0) -#define PINMUX_GPIO168__FUNC_RFIC0_BSI_CK (MTK_PIN_NO(168) | 1) -#define PINMUX_GPIO168__FUNC_SPM_BSI_CK (MTK_PIN_NO(168) | 2) - -#define PINMUX_GPIO169__FUNC_GPIO169 (MTK_PIN_NO(169) | 0) -#define PINMUX_GPIO169__FUNC_PWM_C (MTK_PIN_NO(169) | 1) -#define PINMUX_GPIO169__FUNC_CMMCLK3 (MTK_PIN_NO(169) | 2) -#define PINMUX_GPIO169__FUNC_CMVREF1 (MTK_PIN_NO(169) | 3) -#define PINMUX_GPIO169__FUNC_ANT_SEL7 (MTK_PIN_NO(169) | 4) -#define PINMUX_GPIO169__FUNC_AGPS_SYNC (MTK_PIN_NO(169) | 5) -#define PINMUX_GPIO169__FUNC_TDM_BCK_2ND (MTK_PIN_NO(169) | 6) -#define PINMUX_GPIO169__FUNC_SCP_JTAG_TMS (MTK_PIN_NO(169) | 7) - -#define PINMUX_GPIO170__FUNC_GPIO170 (MTK_PIN_NO(170) | 0) -#define PINMUX_GPIO170__FUNC_I2S1_BCK (MTK_PIN_NO(170) | 1) -#define PINMUX_GPIO170__FUNC_I2S3_BCK (MTK_PIN_NO(170) | 2) -#define PINMUX_GPIO170__FUNC_SCL7 (MTK_PIN_NO(170) | 3) -#define PINMUX_GPIO170__FUNC_I2S5_BCK (MTK_PIN_NO(170) | 4) -#define PINMUX_GPIO170__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(170) | 5) -#define PINMUX_GPIO170__FUNC_TDM_LRCK_2ND (MTK_PIN_NO(170) | 6) -#define PINMUX_GPIO170__FUNC_ANT_SEL3 (MTK_PIN_NO(170) | 7) - -#define PINMUX_GPIO171__FUNC_GPIO171 (MTK_PIN_NO(171) | 0) -#define PINMUX_GPIO171__FUNC_I2S1_LRCK (MTK_PIN_NO(171) | 1) -#define PINMUX_GPIO171__FUNC_I2S3_LRCK (MTK_PIN_NO(171) | 2) -#define PINMUX_GPIO171__FUNC_SDA7 (MTK_PIN_NO(171) | 3) -#define PINMUX_GPIO171__FUNC_I2S5_LRCK (MTK_PIN_NO(171) | 4) -#define PINMUX_GPIO171__FUNC_URXD1 (MTK_PIN_NO(171) | 5) -#define PINMUX_GPIO171__FUNC_TDM_DATA0_2ND (MTK_PIN_NO(171) | 6) -#define PINMUX_GPIO171__FUNC_ANT_SEL4 (MTK_PIN_NO(171) | 7) - -#define PINMUX_GPIO172__FUNC_GPIO172 (MTK_PIN_NO(172) | 0) -#define PINMUX_GPIO172__FUNC_I2S1_DO (MTK_PIN_NO(172) | 1) -#define PINMUX_GPIO172__FUNC_I2S3_DO (MTK_PIN_NO(172) | 2) -#define PINMUX_GPIO172__FUNC_SCL8 (MTK_PIN_NO(172) | 3) -#define PINMUX_GPIO172__FUNC_I2S5_DO (MTK_PIN_NO(172) | 4) -#define PINMUX_GPIO172__FUNC_UTXD1 (MTK_PIN_NO(172) | 5) -#define PINMUX_GPIO172__FUNC_TDM_DATA1_2ND (MTK_PIN_NO(172) | 6) -#define PINMUX_GPIO172__FUNC_ANT_SEL5 (MTK_PIN_NO(172) | 7) - -#define PINMUX_GPIO173__FUNC_GPIO173 (MTK_PIN_NO(173) | 0) -#define PINMUX_GPIO173__FUNC_I2S1_MCK (MTK_PIN_NO(173) | 1) -#define PINMUX_GPIO173__FUNC_I2S3_MCK (MTK_PIN_NO(173) | 2) -#define PINMUX_GPIO173__FUNC_SDA8 (MTK_PIN_NO(173) | 3) -#define PINMUX_GPIO173__FUNC_I2S5_MCK (MTK_PIN_NO(173) | 4) -#define PINMUX_GPIO173__FUNC_UCTS0 (MTK_PIN_NO(173) | 5) -#define PINMUX_GPIO173__FUNC_TDM_DATA2_2ND (MTK_PIN_NO(173) | 6) -#define PINMUX_GPIO173__FUNC_ANT_SEL6 (MTK_PIN_NO(173) | 7) - -#define PINMUX_GPIO174__FUNC_GPIO174 (MTK_PIN_NO(174) | 0) -#define PINMUX_GPIO174__FUNC_I2S2_DI (MTK_PIN_NO(174) | 1) -#define PINMUX_GPIO174__FUNC_I2S0_DI (MTK_PIN_NO(174) | 2) -#define PINMUX_GPIO174__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(174) | 3) -#define PINMUX_GPIO174__FUNC_I2S2_DI2 (MTK_PIN_NO(174) | 4) -#define PINMUX_GPIO174__FUNC_URTS0 (MTK_PIN_NO(174) | 5) -#define PINMUX_GPIO174__FUNC_TDM_DATA3_2ND (MTK_PIN_NO(174) | 6) -#define PINMUX_GPIO174__FUNC_ANT_SEL7 (MTK_PIN_NO(174) | 7) - -#define PINMUX_GPIO175__FUNC_GPIO175 (MTK_PIN_NO(175) | 0) -#define PINMUX_GPIO175__FUNC_ANT_SEL7 (MTK_PIN_NO(175) | 1) - -#define PINMUX_GPIO176__FUNC_GPIO176 (MTK_PIN_NO(176) | 0) - -#define PINMUX_GPIO177__FUNC_GPIO177 (MTK_PIN_NO(177) | 0) - -#define PINMUX_GPIO178__FUNC_GPIO178 (MTK_PIN_NO(178) | 0) - -#define PINMUX_GPIO179__FUNC_GPIO179 (MTK_PIN_NO(179) | 0) - -#endif /* __MT8183-PINFUNC_H */ diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index f90df6439c08..409cf827970c 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -14,7 +14,7 @@ #include <dt-bindings/reset-controller/mt8183-resets.h> #include <dt-bindings/phy/phy.h> #include <dt-bindings/thermal/thermal.h> -#include "mt8183-pinfunc.h" +#include <dt-bindings/pinctrl/mt8183-pinfunc.h> / { compatible = "mediatek,mt8183"; @@ -1355,6 +1355,8 @@ reg = <0 0x14016000 0 0x1000>; interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_LOW>; power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + mediatek,gce-events = <CMDQ_EVENT_MUTEX_STREAM_DONE0>, + <CMDQ_EVENT_MUTEX_STREAM_DONE1>; }; larb0: larb@14017000 { diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi index ad07fff40544..787ebcec121d 100644 --- a/arch/arm64/boot/dts/microchip/sparx5.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi @@ -471,8 +471,9 @@ <0x6 0x10004000 0x7fc000>, <0x6 0x11010000 0xaf0000>; reg-names = "cpu", "dev", "gcb"; - interrupt-names = "xtr"; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "xtr", "fdma"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; resets = <&reset 0>; reset-names = "switch"; }; diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile index e13fb1070472..c80f7dc2935e 100644 --- a/arch/arm64/boot/dts/nvidia/Makefile +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p3450-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb +dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p3509-0000+p3636-0001.dtb dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0001.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 9928a87f593a..b0bcda8cc51f 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -1227,13 +1227,13 @@ cpu@0 { device_type = "cpu"; - compatible = "nvidia,denver"; + compatible = "nvidia,tegra132-denver"; reg = <0>; }; cpu@1 { device_type = "cpu"; - compatible = "nvidia,denver"; + compatible = "nvidia,tegra132-denver"; reg = <1>; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts new file mode 100644 index 000000000000..936b106e73db --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts @@ -0,0 +1,718 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/mfd/max77620.h> + +#include "tegra186.dtsi" + +/ { + model = "NVIDIA Jetson TX2 NX Developer Kit"; + compatible = "nvidia,p3509-0000+p3636-0001", "nvidia,tegra186"; + + aliases { + ethernet0 = "/ethernet@2490000"; + i2c0 = "/bpmp/i2c"; + i2c1 = "/i2c@3160000"; + i2c2 = "/i2c@c240000"; + i2c3 = "/i2c@3180000"; + i2c4 = "/i2c@3190000"; + i2c5 = "/i2c@31c0000"; + i2c6 = "/i2c@c250000"; + i2c7 = "/i2c@31e0000"; + mmc0 = "/mmc@3460000"; + serial0 = &uarta; + }; + + chosen { + bootargs = "earlycon console=ttyS0,115200n8"; + stdout-path = "serial0:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x70000000>; + }; + + ethernet@2490000 { + status = "okay"; + + phy-reset-gpios = <&gpio_aon TEGRA186_AON_GPIO(AA, 6) GPIO_ACTIVE_LOW>; + phy-handle = <&phy>; + phy-mode = "rgmii-id"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + interrupt-parent = <&gpio_aon>; + interrupts = <TEGRA186_AON_GPIO(AA, 7) IRQ_TYPE_LEVEL_LOW>; + #phy-cells = <0>; + }; + }; + }; + + memory-controller@2c00000 { + status = "okay"; + }; + + timer@3010000 { + status = "okay"; + }; + + serial@3100000 { + status = "okay"; + }; + + i2c@3160000 { + status = "okay"; + }; + + i2c@3180000 { + status = "okay"; + + power-monitor@40 { + compatible = "ti,ina3221"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + label = "VDD_IN"; + shunt-resistor-micro-ohms = <5>; + }; + + channel@1 { + reg = <1>; + label = "VDD_CPU_GPU"; + shunt-resistor-micro-ohms = <5>; + }; + + channel@2 { + reg = <2>; + label = "VDD_SOC"; + shunt-resistor-micro-ohms = <>; + }; + }; + }; + + ddc: i2c@3190000 { + status = "okay"; + }; + + i2c@31c0000 { + status = "okay"; + }; + + i2c@31e0000 { + status = "okay"; + }; + + /* SDMMC4 (eMMC) */ + mmc@3460000 { + status = "okay"; + bus-width = <8>; + non-removable; + + vqmmc-supply = <&vdd_1v8_ap>; + vmmc-supply = <&vdd_3v3_sys>; + }; + + hda@3510000 { + nvidia,model = "jetson-tx2-hda"; + status = "okay"; + }; + + padctl@3520000 { + status = "okay"; + + avdd-pll-erefeut-supply = <&vdd_1v8_pll>; + avdd-usb-supply = <&vdd_3v3_sys>; + vclamp-usb-supply = <&vdd_1v8>; + vddio-hsic-supply = <&gnd>; + + pads { + usb2 { + status = "okay"; + + lanes { + micro_b: usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + usb3 { + status = "okay"; + + lanes { + usb3-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "okay"; + mode = "otg"; + vbus-supply = <&vdd_5v0_sys>; + usb-role-switch; + + connector { + compatible = "gpio-usb-b-connector", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + vbus-gpios = <&gpio + TEGRA186_MAIN_GPIO(L, 4) + GPIO_ACTIVE_LOW>; + id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>; + }; + }; + + usb2-1 { + status = "okay"; + mode = "host"; + + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-2 { + status = "okay"; + mode = "host"; + + vbus-supply = <&vdd_5v0_sys>; + }; + + usb3-1 { + nvidia,usb2-companion = <1>; + vbus-supply = <&vdd_5v0_sys>; + status = "okay"; + }; + }; + }; + + usb@3530000 { + status = "okay"; + + phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/padctl@3520000/pads/usb2/lanes/usb2-2}>, + <&{/padctl@3520000/pads/usb3/lanes/usb3-1}>; + phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-1"; + }; + + usb@3550000 { + status = "okay"; + + phys = <µ_b>; + phy-names = "usb2-0"; + }; + + hsp@3c00000 { + status = "okay"; + }; + + i2c@c240000 { + status = "okay"; + }; + + i2c@c250000 { + status = "okay"; + + /* module ID EEPROM */ + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + + label = "module"; + vcc-supply = <&vdd_1v8>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + + /* carrier board ID EEPROM */ + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + + label = "system"; + vcc-supply = <&vdd_1v8>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + + rtc@c2a0000 { + status = "okay"; + }; + + pwm@c340000 { + status = "okay"; + }; + + pmc@c360000 { + nvidia,invert-interrupt; + }; + + pcie@10003000 { + status = "okay"; + + dvdd-pex-supply = <&vdd_pex>; + hvdd-pex-pll-supply = <&vdd_1v8>; + hvdd-pex-supply = <&vdd_1v8>; + vddio-pexctl-aud-supply = <&vdd_1v8>; + + pci@1,0 { + nvidia,num-lanes = <2>; + status = "okay"; + }; + + pci@2,0 { + nvidia,num-lanes = <1>; + status = "disabled"; + }; + + pci@3,0 { + nvidia,num-lanes = <1>; + status = "okay"; + }; + }; + + host1x@13e00000 { + status = "okay"; + + dpaux@15040000 { + status = "okay"; + }; + + display-hub@15200000 { + status = "okay"; + }; + + dsi@15300000 { + status = "disabled"; + }; + + /* DP */ + sor@15540000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8_ap>; + + nvidia,dpaux = <&dpaux>; + }; + + /* HDMI */ + sor@15580000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8_ap>; + hdmi-supply = <&vdd_hdmi>; + + nvidia,ddc-i2c-bus = <&ddc>; + nvidia,hpd-gpio = <&gpio TEGRA186_MAIN_GPIO(P, 1) + GPIO_ACTIVE_LOW>; + }; + + dpaux@155c0000 { + status = "okay"; + }; + }; + + gpu@17000000 { + status = "okay"; + }; + + fan: fan { + compatible = "pwm-fan"; + pwms = <&pwm4 0 45334>; + + cooling-levels = <0 64 128 255>; + #cooling-cells = <2>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0) + GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_POWER>; + debounce-interval = <10>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1) + GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <10>; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2) + GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <10>; + }; + }; + + cpus { + cpu@0 { + enable-method = "psci"; + }; + + cpu@1 { + enable-method = "psci"; + }; + + cpu@2 { + enable-method = "psci"; + }; + + cpu@3 { + enable-method = "psci"; + }; + + cpu@4 { + enable-method = "psci"; + }; + + cpu@5 { + enable-method = "psci"; + }; + }; + + bpmp { + i2c { + status = "okay"; + + pmic: pmic@3c { + compatible = "maxim,max77620"; + reg = <0x3c>; + + interrupt-parent = <&pmc>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + #interrupt-cells = <2>; + interrupt-controller; + + #gpio-cells = <2>; + gpio-controller; + + pinctrl-names = "default"; + pinctrl-0 = <&max77620_default>; + + max77620_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + }; + + gpio1 { + pins = "gpio1"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + }; + + gpio2 { + pins = "gpio2"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_1>; + }; + + gpio3 { + pins = "gpio3"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_1>; + }; + + gpio4 { + pins = "gpio4"; + function = "32k-out1"; + drive-push-pull = <1>; + }; + + gpio5 { + pins = "gpio5"; + function = "gpio"; + drive-push-pull = <0>; + }; + + gpio6 { + pins = "gpio6"; + function = "gpio"; + drive-push-pull = <1>; + }; + + gpio7 { + pins = "gpio7"; + function = "gpio"; + drive-push-pull = <1>; + }; + }; + + fps { + fps0 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + + fps1 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; + maxim,shutdown-fps-time-period-us = <640>; + }; + + fps2 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + }; + + regulators { + in-sd0-supply = <&vdd_5v0_sys>; + in-sd1-supply = <&vdd_5v0_sys>; + in-sd2-supply = <&vdd_5v0_sys>; + in-sd3-supply = <&vdd_5v0_sys>; + + in-ldo0-1-supply = <&vdd_5v0_sys>; + in-ldo2-supply = <&vdd_5v0_sys>; + in-ldo3-5-supply = <&vdd_5v0_sys>; + in-ldo4-6-supply = <&vdd_1v8>; + in-ldo7-8-supply = <&avdd_dsi_csi>; + + sd0 { + regulator-name = "VDD_DDR_1V1_PMIC"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + avdd_dsi_csi: sd1 { + regulator-name = "AVDD_DSI_CSI_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vdd_1v8: sd2 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vdd_3v3_sys: sd3 { + regulator-name = "VDD_3V3_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_1v8_pll: ldo0 { + regulator-name = "VDD_1V8_AP_PLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2 { + regulator-name = "VDDIO_3V3_AOHV"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vddio_sdmmc1: ldo3 { + regulator-name = "VDDIO_SDMMC1_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo4 { + regulator-name = "VDD_RTC"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vddio_sdmmc3: ldo5 { + regulator-name = "VDDIO_SDMMC3_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vdd_hdmi_1v05: ldo7 { + regulator-name = "VDD_HDMI_1V05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + vdd_pex: ldo8 { + regulator-name = "VDD_PEX_1V05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + }; + }; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + status = "okay"; + method = "smc"; + }; + + gnd: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "GND"; + regulator-min-microvolt = <0>; + regulator-max-microvolt = <0>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V0_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8_ap: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_1v8>; + }; + + vdd_hdmi: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V0_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&vdd_5v0_sys>; + }; + + thermal-zones { + cpu { + polling-delay = <0>; + polling-delay-passive = <500>; + status = "okay"; + + trips { + cpu_trip_critical: critical { + temperature = <96500>; + hysteresis = <0>; + type = "critical"; + }; + + cpu_trip_hot: hot { + temperature = <79000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_trip_active: active { + temperature = <62000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_trip_passive: passive { + temperature = <45000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + cpu-critical { + cooling-device = <&fan 3 3>; + trip = <&cpu_trip_critical>; + }; + + cpu-hot { + cooling-device = <&fan 2 2>; + trip = <&cpu_trip_hot>; + }; + + cpu-active { + cooling-device = <&fan 1 1>; + trip = <&cpu_trip_active>; + }; + + cpu-passive { + cooling-device = <&fan 0 0>; + trip = <&cpu_trip_passive>; + }; + }; + }; + + gpu { + polling-delay = <0>; + polling-delay-passive = <500>; + status = "okay"; + + trips { + gpu_alert0: critical { + temperature = <99000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aux { + polling-delay = <0>; + polling-delay-passive = <500>; + status = "okay"; + + trips { + aux_alert0: critical { + temperature = <90000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index d02f6bf3e2ca..e94f8add1a40 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -548,6 +548,83 @@ status = "disabled"; }; + pwm1: pwm@3280000 { + compatible = "nvidia,tegra186-pwm"; + reg = <0x0 0x3280000 0x0 0x10000>; + clocks = <&bpmp TEGRA186_CLK_PWM1>; + clock-names = "pwm"; + resets = <&bpmp TEGRA186_RESET_PWM1>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + + pwm2: pwm@3290000 { + compatible = "nvidia,tegra186-pwm"; + reg = <0x0 0x3290000 0x0 0x10000>; + clocks = <&bpmp TEGRA186_CLK_PWM2>; + clock-names = "pwm"; + resets = <&bpmp TEGRA186_RESET_PWM2>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + + pwm3: pwm@32a0000 { + compatible = "nvidia,tegra186-pwm"; + reg = <0x0 0x32a0000 0x0 0x10000>; + clocks = <&bpmp TEGRA186_CLK_PWM3>; + clock-names = "pwm"; + resets = <&bpmp TEGRA186_RESET_PWM3>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + + pwm5: pwm@32c0000 { + compatible = "nvidia,tegra186-pwm"; + reg = <0x0 0x32c0000 0x0 0x10000>; + clocks = <&bpmp TEGRA186_CLK_PWM5>; + clock-names = "pwm"; + resets = <&bpmp TEGRA186_RESET_PWM5>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + + pwm6: pwm@32d0000 { + compatible = "nvidia,tegra186-pwm"; + reg = <0x0 0x32d0000 0x0 0x10000>; + clocks = <&bpmp TEGRA186_CLK_PWM6>; + clock-names = "pwm"; + resets = <&bpmp TEGRA186_RESET_PWM6>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + + pwm7: pwm@32e0000 { + compatible = "nvidia,tegra186-pwm"; + reg = <0x0 0x32e0000 0x0 0x10000>; + clocks = <&bpmp TEGRA186_CLK_PWM7>; + clock-names = "pwm"; + resets = <&bpmp TEGRA186_RESET_PWM7>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + + pwm8: pwm@32f0000 { + compatible = "nvidia,tegra186-pwm"; + reg = <0x0 0x32f0000 0x0 0x10000>; + clocks = <&bpmp TEGRA186_CLK_PWM8>; + clock-names = "pwm"; + resets = <&bpmp TEGRA186_RESET_PWM8>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + sdmmc1: mmc@3400000 { compatible = "nvidia,tegra186-sdhci"; reg = <0x0 0x03400000 0x0 0x10000>; @@ -826,6 +903,9 @@ <&bpmp TEGRA186_CLK_XUSB_CORE_SS>, <&bpmp TEGRA186_CLK_XUSB_FS>; clock-names = "dev", "ss", "ss_src", "fs_src"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_XUSB_DEVR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_XUSB_DEVW &emc>; + interconnect-names = "dma-mem", "write"; iommus = <&smmu TEGRA186_SID_XUSB_DEV>; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBB>, <&bpmp TEGRA186_POWER_DOMAIN_XUSBA>; @@ -944,6 +1024,17 @@ #interrupt-cells = <2>; }; + pwm4: pwm@c340000 { + compatible = "nvidia,tegra186-pwm"; + reg = <0x0 0xc340000 0x0 0x10000>; + clocks = <&bpmp TEGRA186_CLK_PWM4>; + clock-names = "pwm"; + resets = <&bpmp TEGRA186_RESET_PWM4>; + reset-names = "pwm"; + status = "disabled"; + #pwm-cells = <2>; + }; + pmc: pmc@c360000 { compatible = "nvidia,tegra186-pmc"; reg = <0 0x0c360000 0 0x10000>, diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index 7e7b0eb90c80..c4058ee36fec 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -309,7 +309,7 @@ interrupt-parent = <&gpio>; interrupts = <TEGRA194_MAIN_GPIO(H, 2) - IRQ_TYPE_LEVEL_LOW>; + IRQ_TYPE_EDGE_FALLING>; vcc-supply = <&vdd_1v8ls>; #thermal-sensor-cells = <1>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index b7d532841390..c8250a3f7891 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -948,6 +948,10 @@ <&bpmp TEGRA194_CLK_XUSB_SS>, <&bpmp TEGRA194_CLK_XUSB_FS>; clock-names = "dev", "ss", "ss_src", "fs_src"; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_XUSB_DEVR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_XUSB_DEVW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_XUSB_DEV>; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_XUSBB>, <&bpmp TEGRA194_POWER_DOMAIN_XUSBA>; power-domain-names = "dev", "ss"; @@ -977,6 +981,10 @@ "xusb_ss", "xusb_ss_src", "xusb_hs_src", "xusb_fs_src", "pll_u_480m", "clk_m", "pll_e"; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_XUSB_HOST>; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_XUSBC>, <&bpmp TEGRA194_POWER_DOMAIN_XUSBA>; @@ -1832,7 +1840,11 @@ interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE1R &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE1W &emc>; - interconnect-names = "read", "write"; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_PCIE1>; + iommu-map = <0x0 &smmu TEGRA194_SID_PCIE1 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; }; pcie@14120000 { @@ -1882,7 +1894,11 @@ interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE2AR &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE2AW &emc>; - interconnect-names = "read", "write"; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_PCIE2>; + iommu-map = <0x0 &smmu TEGRA194_SID_PCIE2 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; }; pcie@14140000 { @@ -1932,7 +1948,11 @@ interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE3R &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE3W &emc>; - interconnect-names = "read", "write"; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_PCIE3>; + iommu-map = <0x0 &smmu TEGRA194_SID_PCIE3 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; }; pcie@14160000 { @@ -1982,7 +2002,11 @@ interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>; - interconnect-names = "read", "write"; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_PCIE4>; + iommu-map = <0x0 &smmu TEGRA194_SID_PCIE4 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; }; pcie@14180000 { @@ -2032,7 +2056,11 @@ interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>; - interconnect-names = "read", "write"; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_PCIE0>; + iommu-map = <0x0 &smmu TEGRA194_SID_PCIE0 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; }; pcie@141a0000 { @@ -2086,11 +2114,15 @@ interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>; - interconnect-names = "read", "write"; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_PCIE5>; + iommu-map = <0x0 &smmu TEGRA194_SID_PCIE5 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; }; pcie_ep@14160000 { - compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; + compatible = "nvidia,tegra194-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>; reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ @@ -2119,10 +2151,18 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_PCIE4>; + iommu-map = <0x0 &smmu TEGRA194_SID_PCIE4 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; }; pcie_ep@14180000 { - compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; + compatible = "nvidia,tegra194-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ @@ -2151,10 +2191,18 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_PCIE0>; + iommu-map = <0x0 &smmu TEGRA194_SID_PCIE0 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; }; pcie_ep@141a0000 { - compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; + compatible = "nvidia,tegra194-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ @@ -2186,6 +2234,14 @@ nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; + + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_PCIE5>; + iommu-map = <0x0 &smmu TEGRA194_SID_PCIE5 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; }; sram@40000000 { @@ -2469,6 +2525,11 @@ * for 8x and 11.025x sample rate streams. */ assigned-clock-rates = <258000000>; + + interconnects = <&mc TEGRA194_MEMORY_CLIENT_APEDMAR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_APEDMAW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_APE>; }; tcu: tcu { diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 4f0597091976..70516508be56 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-xiaomi-libra.dtb @@ -26,6 +27,12 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-satsuki.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-suzuran.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-dora.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-kagura.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-keyaki.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-dora.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-kagura.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb @@ -60,6 +67,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb @@ -75,6 +83,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-enchilada.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 6aef0c2e4f0a..f8d8f3e3664e 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -414,6 +414,7 @@ &funnel0 { status = "okay"; }; &funnel1 { status = "okay"; }; &replicator { status = "okay"; }; +&stm { status = "okay"; }; &tpiu { status = "okay"; }; &smd_rpm_regulators { diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 068692350e00..51e17094d7b1 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -1063,7 +1063,7 @@ status = "okay"; extcon = <&usb2_id>; - usb@7600000 { + dwc3@7600000 { extcon = <&usb2_id>; dr_mode = "otg"; maximum-speed = "high-speed"; @@ -1074,7 +1074,7 @@ status = "okay"; extcon = <&usb3_id>; - usb@6a00000 { + dwc3@6a00000 { extcon = <&usb3_id>; dr_mode = "otg"; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts index 8c7a27e972b7..a57c60070cdc 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts @@ -92,6 +92,14 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_phy { + status = "okay"; +}; + &mdss { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts index 99cefe88f6f2..5aec18308712 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts +++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts @@ -78,3 +78,11 @@ nand-bus-width = <8>; }; }; + +&qusb_phy_1 { + status = "ok"; +}; + +&usb2 { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 9fa5b028e4f3..d2fe58e0eb7a 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -151,7 +151,7 @@ #size-cells = <2>; ranges; - rpm_msg_ram: memory@0x60000 { + rpm_msg_ram: memory@60000 { reg = <0x0 0x60000 0x0 0x6000>; no-map; }; @@ -258,9 +258,9 @@ reg = <0x0 0x01905000 0x0 0x8000>; }; - tcsr_q6: syscon@1945000 { + tcsr: syscon@1937000 { compatible = "syscon"; - reg = <0x0 0x01945000 0x0 0xe000>; + reg = <0x0 0x01937000 0x0 0x21000>; }; blsp_dma: dma-controller@7884000 { @@ -384,6 +384,105 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + pcie_phy: phy@84000 { + compatible = "qcom,ipq6018-qmp-pcie-phy"; + reg = <0x0 0x84000 0x0 0x1bc>; /* Serdes PLL */ + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_PCIE0_AUX_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + reset-names = "phy", + "common"; + + pcie_phy0: lane@84200 { + reg = <0x0 0x84200 0x0 0x16c>, /* Serdes Tx */ + <0x0 0x84400 0x0 0x200>, /* Serdes Rx */ + <0x0 0x84800 0x0 0x4f4>; /* PCS: Lane0, COM, PCIE */ + #phy-cells = <0>; + + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_pcie0_pipe_clk_src"; + #clock-cells = <0>; + }; + }; + + pcie0: pci@20000000 { + compatible = "qcom,pcie-ipq6018"; + reg = <0x0 0x20000000 0x0 0xf1d>, + <0x0 0x20000f20 0x0 0xa8>, + <0x0 0x20001000 0x0 0x1000>, + <0x0 0x80000 0x0 0x4000>, + <0x0 0x20100000 0x0 0x1000>; + reg-names = "dbi", "elbi", "atu", "parf", "config"; + + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + phys = <&pcie_phy0>; + phy-names = "pciephy"; + + ranges = <0x81000000 0 0x20200000 0 0x20200000 + 0 0x10000>, /* downstream I/O */ + <0x82000000 0 0x20220000 0 0x20220000 + 0 0xfde0000>; /* non-prefetchable memory */ + + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 75 + IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 78 + IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 79 + IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 83 + IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, + <&gcc GCC_PCIE0_AXI_M_CLK>, + <&gcc GCC_PCIE0_AXI_S_CLK>, + <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, + <&gcc PCIE0_RCHNG_CLK>; + clock-names = "iface", + "axi_m", + "axi_s", + "axi_bridge", + "rchng"; + + resets = <&gcc GCC_PCIE0_PIPE_ARES>, + <&gcc GCC_PCIE0_SLEEP_ARES>, + <&gcc GCC_PCIE0_CORE_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE0_AHB_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", + "axi_m_sticky", + "axi_s_sticky"; + + status = "disabled"; + }; + watchdog@b017000 { compatible = "qcom,kpss-wdt"; interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; @@ -477,7 +576,7 @@ }; q6v5_wcss: remoteproc@cd00000 { - compatible = "qcom,ipq8074-wcss-pil"; + compatible = "qcom,ipq6018-wcss-pil"; reg = <0x0 0x0cd00000 0x0 0x4040>, <0x0 0x004ab000 0x0 0x20>; reg-names = "qdsp6", @@ -504,7 +603,7 @@ clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "prng"; - qcom,halt-regs = <&tcsr_q6 0xa000 0xd000 0x0>; + qcom,halt-regs = <&tcsr 0x18000 0x1b000 0xe000>; qcom,smem-states = <&wcss_smp2p_out 0>, <&wcss_smp2p_out 1>; @@ -524,6 +623,54 @@ }; }; + qusb_phy_1: qusb@59000 { + compatible = "qcom,ipq6018-qusb2-phy"; + reg = <0x0 0x059000 0x0 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2_1_PHY_BCR>; + status = "disabled"; + }; + + usb2: usb2@7000000 { + compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; + reg = <0x0 0x070F8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_SLEEP_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; + clock-names = "master", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; + assigned-clock-rates = <133330000>, + <24000000>; + resets = <&gcc GCC_USB1_BCR>; + status = "disabled"; + + dwc_1: usb@7000000 { + compatible = "snps,dwc3"; + reg = <0x0 0x7000000 0x0 0xcd00>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + phys = <&qusb_phy_1>; + phy-names = "usb2-phy"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + dr_mode = "host"; + }; + }; + }; wcss: wcss-smp2p { diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts index e8c37a1693d3..cc08dc4eb56a 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -20,7 +20,7 @@ stdout-path = "serial0"; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x0 0x40000000 0x0 0x20000000>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 95d6cb8cd4c0..a620ac0d0b19 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -76,6 +76,12 @@ method = "smc"; }; + firmware { + scm { + compatible = "qcom,scm-ipq8074", "qcom,scm"; + }; + }; + soc: soc { #address-cells = <0x1>; #size-cells = <0x1>; @@ -198,6 +204,38 @@ status = "disabled"; }; + prng: rng@e3000 { + compatible = "qcom,prng-ee"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + status = "disabled"; + }; + + cryptobam: dma@704000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x00704000 0x20000>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <1>; + qcom,controlled-remotely = <1>; + status = "disabled"; + }; + + crypto: crypto@73a000 { + compatible = "qcom,crypto-v5.1"; + reg = <0x0073a000 0x6000>; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 2>, <&cryptobam 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,ipq8074-pinctrl"; reg = <0x01000000 0x300000>; @@ -443,7 +481,7 @@ resets = <&gcc GCC_USB0_BCR>; status = "disabled"; - dwc_0: usb@8a00000 { + dwc_0: dwc3@8a00000 { compatible = "snps,dwc3"; reg = <0x8a00000 0xcd00>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; @@ -484,7 +522,7 @@ resets = <&gcc GCC_USB1_BCR>; status = "disabled"; - dwc_1: usb@8c00000 { + dwc_1: dwc3@8c00000 { compatible = "snps,dwc3"; reg = <0x8c00000 0xcd00>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; @@ -583,10 +621,10 @@ pcie1: pci@10000000 { compatible = "qcom,pcie-ipq8074"; - reg = <0x10000000 0xf1d - 0x10000f20 0xa8 - 0x00088000 0x2000 - 0x10100000 0x1000>; + reg = <0x10000000 0xf1d>, + <0x10000f20 0xa8>, + <0x00088000 0x2000>, + <0x10100000 0x1000>; reg-names = "dbi", "elbi", "parf", "config"; device_type = "pci"; linux,pci-domain = <1>; @@ -645,10 +683,10 @@ pcie0: pci@20000000 { compatible = "qcom,pcie-ipq8074"; - reg = <0x20000000 0xf1d - 0x20000f20 0xa8 - 0x00080000 0x2000 - 0x20100000 0x1000>; + reg = <0x20000000 0xf1d>, + <0x20000f20 0xa8>, + <0x00080000 0x2000>, + <0x20100000 0x1000>; reg-names = "dbi", "elbi", "parf", "config"; device_type = "pci"; linux,pci-domain = <0>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts index c3f885923127..d66c15538785 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts @@ -9,6 +9,5 @@ / { model = "Qualcomm Technologies, Inc. MSM 8916 MTP"; - compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", - "qcom,msm8916", "qcom,mtp"; + compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts new file mode 100644 index 000000000000..4e20cc0008f7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -0,0 +1,313 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2020 Stephan Gerhold + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Xiaomi Redmi 2 (Wingtech WT88047)"; + compatible = "wingtech,wt88047", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + imu@68 { + compatible = "invensense,mpu6880"; + reg = <0x68>; + + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&imu_default>; + + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@38 { + /* Likely some other model but works just fine with this one */ + compatible = "edt,edt-ft5506"; + reg = <0x38>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8916_l17>; + iovcc-supply = <&pm8916_l6>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_default>; + }; +}; + +&blsp_i2c6 { + status = "okay"; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + #address-cells = <1>; + #size-cells = <0>; + + vcc-supply = <&pm8916_l16>; + + led@0 { + reg = <0>; + led-max-microamp = <15000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + led-max-microamp = <15000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + reg = <2>; + led-max-microamp = <15000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + non-removable; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + imu_default: imu-default { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + + reset { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + }; + + usb_id_default: usb-id-default { + pins = "gpio110"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 4f06c0a9c425..3f85e34a8ce6 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -489,6 +489,26 @@ <&rpmcc RPM_SMD_SNOC_A_CLK>; }; + stm: stm@802000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x00802000 0x1000>, + <0x09280000 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + status = "disabled"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel0_in7>; + }; + }; + }; + }; + /* System CTIs */ /* CTI 0 - TMC connections */ cti0: cti@810000 { @@ -562,6 +582,13 @@ remote-endpoint = <&funnel1_out>; }; }; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; }; out-ports { diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts index 23cdcc9f7c72..1ccca83292ac 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /* Copyright (c) 2015, LGE Inc. All rights reserved. * Copyright (c) 2016, The Linux Foundation. All rights reserved. + * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com> */ /dts-v1/; @@ -9,6 +10,9 @@ #include "pm8994.dtsi" #include "pmi8994.dtsi" +/* cont_splash_mem has different memory mapping */ +/delete-node/ &cont_splash_mem; + / { model = "LG Nexus 5X"; compatible = "lg,bullhead", "qcom,msm8992"; @@ -17,6 +21,9 @@ qcom,board-id = <0xb64 0>; qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; + /* Bullhead firmware doesn't support PSCI */ + /delete-node/ psci; + aliases { serial0 = &blsp1_uart2; }; @@ -38,6 +45,11 @@ ftrace-size = <0x10000>; pmsg-size = <0x20000>; }; + + cont_splash_mem: memory@3400000 { + reg = <0 0x03400000 0 0x1200000>; + no-map; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts index ffe1a9bd8f70..c096b7758aa0 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts @@ -1,12 +1,16 @@ // SPDX-License-Identifier: GPL-2.0-only /* Copyright (c) 2015, Huawei Inc. All rights reserved. * Copyright (c) 2016, The Linux Foundation. All rights reserved. + * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com> */ /dts-v1/; #include "msm8994.dtsi" +/* Angler's firmware does not report where the memory is allocated */ +/delete-node/ &cont_splash_mem; + / { model = "Huawei Nexus 6P"; compatible = "huawei,angler", "qcom,msm8994"; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index f9f0b5aa6a26..986fe60dec5f 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -15,16 +15,18 @@ chosen { }; clocks { - xo_board: xo_board { + xo_board: xo-board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; + clock-output-names = "xo_board"; }; - sleep_clk: sleep_clk { + sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; + clock-output-names = "sleep_clk"; }; }; @@ -430,7 +432,7 @@ power-domains = <&gcc USB30_GDSC>; qcom,select-utmi-as-pipe-clk; - dwc3@f9200000 { + usb@f9200000 { compatible = "snps,dwc3"; reg = <0xf9200000 0xcc00>; interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi index 1e1514e9158c..ac43a91f1104 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi @@ -20,3 +20,11 @@ }; }; }; + +&hdmi { + status = "okay"; +}; + +&hdmi_phy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-dora.dts b/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-dora.dts new file mode 100644 index 000000000000..b018693600a5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-dora.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +#include "msm8996-sony-xperia-tone-dora.dts" +#include "pmi8996.dtsi" + +/ { + model = "Sony Xperia X Performance (PMI8996)"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-kagura.dts b/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-kagura.dts new file mode 100644 index 000000000000..842ea3cf557e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-kagura.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +#include "msm8996-sony-xperia-tone-kagura.dts" +#include "pmi8996.dtsi" + +/ { + model = "Sony Xperia XZ (PMI8996)"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-keyaki.dts b/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-keyaki.dts new file mode 100644 index 000000000000..b3f9062da4b0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-keyaki.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +#include "msm8996-sony-xperia-tone-keyaki.dts" +#include "pmi8996.dtsi" + +/ { + model = "Sony Xperia XZs (PMI8996)"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts new file mode 100644 index 000000000000..b4cca54dcb68 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include "msm8996-sony-xperia-tone.dtsi" + +/ { + model = "Sony Xperia X Performance"; + compatible = "sony,dora-row", "qcom,msm8996"; +}; + +/delete-node/ &tof_sensor; +/delete-node/ &pm8994_l11; +/delete-node/ &pm8994_l14; + +&usb_detect { + pins = "gpio24"; +}; + +&usb3_id { + id-gpio = <&tlmm 24 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts new file mode 100644 index 000000000000..be6ea855fcce --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include "msm8996-sony-xperia-tone.dtsi" + +/ { + model = "Sony Xperia XZ"; + compatible = "sony,kagura-row", "qcom,msm8996"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts new file mode 100644 index 000000000000..1eee7d0fc178 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include "msm8996-sony-xperia-tone.dtsi" + +/ { + model = "Sony Xperia XZs"; + compatible = "sony,keyaki-row", "qcom,msm8996"; +}; + +&pm8994_l19 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; + +&pm8994_l30 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-pull-down; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi new file mode 100644 index 000000000000..507396c4d23b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -0,0 +1,956 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +#include "msm8996.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> + +/delete-node/ &slpi_region; +/delete-node/ &venus_region; +/delete-node/ &zap_shader_region; + +/ { + qcom,msm-id = <246 0x30001>; /* MSM8996 V3.1 (Final) */ + qcom,pmic-id = <0x20009 0x2000a 0 0>; /* PM8994 + PMI8994 */ + qcom,board-id = <8 0>; + + chosen { + /* + * Due to an unknown-for-a-few-years regression, + * SDHCI only works on MSM8996 in PIO (lame) mode. + */ + bootargs = "sdhci.debug_quirks=0x40 sdhci.debug_quirks2=0x4 maxcpus=2"; + }; + + reserved-memory { + ramoops@a7f00000 { + compatible = "ramoops"; + reg = <0 0xa7f00000 0 0x100000>; + record-size = <0x20000>; + console-size = <0x40000>; + ftrace-size = <0x20000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + }; + + cont_splash_mem: memory@83401000 { + reg = <0 0x83401000 0 0x23ff000>; + no-map; + }; + + zap_shader_region: gpu@90400000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x90400000 0x0 0x2000>; + no-map; + }; + + slpi_region: memory@90500000 { + reg = <0 0x90500000 0 0xa00000>; + no-map; + }; + + venus_region: memory@90f00000 { + reg = <0 0x90f00000 0 0x500000>; + no-map; + }; + }; + + panel_tvdd: tvdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "panel_tvdd"; + gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&tp_vddio_en>; + pinctrl-names = "default"; + }; + + usb3_id: usb3-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 25 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_detect>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; + + wlan_en: wlan-en-1-8v { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&wl_reg_on>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + clock-frequency = <355000>; + + tof_sensor: vl53l0x@29 { + compatible = "st,vl53l0x"; + reg = <0x29>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + /* FUSB301 USB-C controller */ +}; + +&blsp2_i2c6 { + status = "okay"; + clock-frequency = <355000>; + + synaptics@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&panel_tvdd>; + + syna,reset-delay-ms = <220>; + syna,startup-delay-ms = <220>; + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp2_uart2 { + status = "okay"; +}; + +&camera0_mclk { + drive-strength = <2>; + output-low; +}; + +&camera0_pwdn { + drive-strength = <2>; + output-low; +}; + +&camera0_rst { + pins = "gpio30"; + drive-strength = <2>; + output-low; +}; + +&camera2_mclk { + drive-strength = <2>; + output-low; +}; + +&camera2_rst { + drive-strength = <2>; + output-low; +}; + +&hsusb_phy1 { + status = "okay"; + + vdda-pll-supply = <&pm8994_l12>; + vdda-phy-dpdm-supply = <&pm8994_l24>; +}; + +&mmcc { + vdd-gfx-supply = <&vdd_gfx>; +}; + +&pcie0 { + status = "okay"; + perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>; + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&pm8994_l28>; +}; + +&pcie_phy { + status = "okay"; + + vdda-phy-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; +}; + +&pm8994_gpios { + pinctrl-names = "default"; + pinctrl-0 = <&pm8994_gpios_defaults>; + gpio-line-names = + "NC", + "VOL_DOWN_N", + "VOL_UP_N", + "SNAPSHOT_N", + "FOCUS_N", + "NC", + "NFC_VEN", + "NC", + "NC", + "NC", + "NC", + "NC", + "EAR_EN", + "NC", + "PM_DIVCLK1", + "PMI_CLK", + "NC", + "WL_SLEEP_CLK", + "NC", + "PMIC_SPON", + "UIM_BATT_ALARM", + "PMK_SLEEP_CLK"; + + /* + * We don't yet know for sure which GPIOs are of our interest, but what + * we do know is that if a vendor sets the pins to a non-default state, there's + * probably a reason for it, and just to be on the safe side, we follow suit. + */ + pm8994_gpios_defaults: pm8994-gpios-default-state { + pm8994-gpio1-nc { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + }; + + vol-down-n { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; + }; + + vol-up-n { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-pull-up; + power-source = <PM8994_GPIO_S4>; + }; + + camera-snapshot-n { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; + }; + + camera-focus-n { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; + }; + + pm8994-gpio6-nc { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + power-source = <PM8994_GPIO_VPH>; + }; + + nfc-download { + pins = "gpio7"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + drive-push-pull; + bias-disable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_S4>; + }; + + pm8994-gpio8-nc { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + drive-push-pull; + bias-high-impedance; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_VPH>; + }; + + pm8994-gpio9-nc { + pins = "gpio9"; + function = PMIC_GPIO_FUNC_NORMAL; + output-high; + drive-push-pull; + bias-high-impedance; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_VPH>; + }; + + nfc-clock { + pins = "gpio10"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + drive-push-pull; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; + }; + + pm8994-gpio11-nc { + pins = "gpio11"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + power-source = <PM8994_GPIO_VPH>; + }; + + pm8994-gpio12-nc { + pins = "gpio12"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + power-source = <PM8994_GPIO_VPH>; + }; + + ear-enable { + pins = "gpio13"; + function = PMIC_GPIO_FUNC_NORMAL; + output-high; + drive-push-pull; + bias-disable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_S4>; + }; + + pm8994-gpio14-nc { + pins = "gpio14"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-high-impedance; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_VPH>; + }; + + pm-divclk1-gpio { + pins = "gpio15"; + function = "func1"; + output-high; + drive-push-pull; + bias-high-impedance; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_VPH>; + }; + + pmi-clk-gpio { + pins = "gpio16"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + }; + + pm8994-gpio17-nc { + pins = "gpio17"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + power-source = <PM8994_GPIO_VPH>; + }; + + rome-sleep { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + output-low; + drive-push-pull; + bias-disable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>; + power-source = <PM8994_GPIO_S4>; + }; + + pm8994-gpio19-nc { + pins = "gpio19"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + drive-push-pull; + bias-high-impedance; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_VPH>; + }; + + pm8994-gpio22-nc { + pins = "gpio22"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + power-source = <PM8994_GPIO_VPH>; + }; + }; +}; + +&pm8994_mpps { + pinctrl-names = "default"; + pinctrl-0 = <&pm8994_mpps_defaults>; + + gpio-line-names = + "SDC_UIM_VBIAS", + "LCD_ID_ADC", + "VREF_DACX", + "NC", + "FLASH_THERM", + "NC", + "NC", + "RF_ID"; + + pm8994_mpps_defaults: pm8994-mpps-default-state { + lcd-id_adc-mpp { + pins = "mpp2"; + function = "analog"; + input-enable; + qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH6>; + }; + + pm-mpp4-nc { + pins = "mpp4"; + function = "digital"; + bias-high-impedance; + power-source = <PM8994_GPIO_VPH>; + }; + + flash-therm-mpp { + pins = "mpp5"; + function = "analog"; + input-enable; + qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>; + }; + + mpp6-nc { + pins = "mpp6"; + function = "digital"; + bias-high-impedance; + }; + + rf-id-mpp { + pins = "mpp8"; + function = "analog"; + input-enable; + qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH8>; + }; + }; +}; + +&pm8994_resin { + status = "okay"; + linux,code = <KEY_VOLUMEUP>; +}; + +&pmi8994_gpios { + pinctrl-names = "default"; + pinctrl-0 = <&pmi8994_gpios_defaults>; + + gpio-line-names = + "VIB_LDO_EN", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "USB_SWITCH_SEL", + "NC"; + + pmi8994_gpios_defaults: pmi8994-gpios-default-state { + vib-ldo-en-gpio { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-low; + bias-disable; + power-source = <PM8994_GPIO_S4>; + }; + + pmi-gpio2-nc { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-high-impedance; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_VPH>; + }; + + pmi-gpio3-nc { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-high-impedance; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_VPH>; + }; + + pmi-gpio4-nc { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-high; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_S4>; + }; + + pmi-gpio5-nc { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-high; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; + }; + + pmi-gpio6-nc { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-high; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_S4>; + }; + + pmi-gpio7-nc { + pins = "gpio7"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-high; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_S4>; + }; + + pmi-gpio8-nc { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-high; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_S4>; + }; + + usb-switch-sel { + pins = "gpio9"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + }; + + pmi-gpio10-nc { + pins = "gpio10"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + drive-push-pull; + bias-disable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; + }; + }; +}; + +&pmi8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + + vdd_gfx: + pmi8994_s2: s2 { + /* Pinned to a high value for now to avoid random crashes. */ + regulator-min-microvolt = <1015000>; + regulator-max-microvolt = <1015000>; + regulator-name = "vdd_gfx"; + regulator-always-on; + }; + + pmi8994_s9: s9 { + qcom,saw-slave; + }; + + pmi8994_s10: s10 { + qcom,saw-slave; + }; + + pmi8994_s11: s11 { + qcom,saw-leader; + regulator-always-on; + regulator-min-microvolt = <470000>; + regulator-max-microvolt = <1140000>; + }; +}; + +&pmi8994_wled { + status = "okay"; + default-brightness = <512>; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8994_s3>; + vdd_l2_l26_l28-supply = <&pm8994_s3>; + vdd_l3_l11-supply = <&pm8994_s3>; + vdd_l4_l27_l31-supply = <&pm8994_s3>; + vdd_l5_l7-supply = <&pm8994_s5>; + vdd_l6_l12_l32-supply = <&pm8994_s5>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l14_l15-supply = <&pm8994_s5>; + vdd_l20_l21-supply = <&pm8994_s5>; + vdd_l25-supply = <&pm8994_s3>; + vdd_lvs1_2-supply = <&pm8994_s4>; + + pm8994_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8994_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <325000>; + regulator-always-on; + }; + + pm8994_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pm8994_s7: s7 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + pm8994_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l2: l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + + pm8994_l3: l3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + pm8994_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + /* L6 and L7 seem unused. */ + + pm8994_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l11: l11 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + pm8994_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + pm8994_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <22000>; + regulator-allow-set-load; + }; + + pm8994_l14: l14 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + }; + + pm8994_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l17: l17 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2500000>; + }; + + pm8994_l18: l18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l19: l19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8994_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <570000>; + regulator-allow-set-load; + }; + + pm8994_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + + pm8994_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8994_l23: l23 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-allow-set-load; + }; + + pm8994_l25: l25 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + + pm8994_l27: l27 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l28: l28 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + + pm8994_l29: l29 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l30: l30 { }; + + pm8994_l32: l32 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; +}; + +&sdhc1 { + /* eMMC doesn't seem to cooperate even in PIO mode.. */ + status = "disabled"; + + vmmc-supply = <&pm8994_l20>; + vqmmc-supply = <&pm8994_s4>; + mmc-hs400-1_8v; + mmc-hs200-1_8v; +}; + +&sdhc2 { + status = "okay"; + + cd-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&pm8994_l21>; + vqmmc-supply = <&pm8994_l13>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; + pinctrl-0 = <&sw_service_gpio>; + pinctrl-names = "default"; + + disp_reset_n_gpio: disp-reset-n { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + mdp_vsync_p_gpio: mdp-vsync-p { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; + + sw_service_gpio: sw-service-gpio { + pins = "gpio16"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + usb_detect: usb-detect { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + uim_detect_en: uim-detect-en { + pins = "gpio29"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + tray_det_pin: tray-det { + pins = "gpio40"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tp_vddio_en: tp-vddio-en { + pins = "gpio50"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + lcd_vddio_en: lcd-vddio-en { + pins = "gpio51"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + wl_host_wake: wl-host-wake { + pins = "gpio79"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-high; + }; + + wl_reg_on: wl-reg-on { + pins = "gpio84"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + ts_reset_n: ts-rst-n { + pins = "gpio89"; + function = "gpio"; + drive-strength = <2>; + }; + + touch_int_n: touch-int-n { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + touch_int_sleep: touch-int-sleep { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +/* + * For reasons that are currently unknown (but probably related to fusb301), USB takes about + * 6 minutes to wake up (nothing interesting in kernel logs), but then it works as it should. + */ +&usb3 { + status = "okay"; + qcom,select-utmi-as-pipe-clk; +}; + +&usb3_dwc3 { + extcon = <&usb3_id>; + dr_mode = "peripheral"; + phys = <&hsusb_phy1>; + phy-names = "usb2-phy"; + snps,hird-threshold = /bits/ 8 <0>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi b/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi new file mode 100644 index 000000000000..5728583af41e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +#include "msm8996.dtsi" + +/ { + qcom,msm-id = <246 0x30000>; +}; + + /* + * This revision seems to have differ GPU CPR + * parameters, GPU frequencies and some differences + * when it comes to voltage delivery to.. once again + * the GPU. Funnily enough, it's simpler to make it an + * overlay on top of 3.1 (the final one) than vice versa. + * The differences will show here as more and more + * features get enabled upstream. + */ + +gpu_opp_table_3_0: gpu-opp-table-30 { + compatible = "operating-points-v2"; + + opp-624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-level = <7>; + }; + + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + opp-level = <6>; + }; + + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-level = <5>; + }; + + opp-401800000 { + opp-hz = /bits/ 64 <401800000>; + opp-level = <4>; + }; + + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-level = <3>; + }; + + opp-214000000 { + opp-hz = /bits/ 64 <214000000>; + opp-level = <3>; + }; + + opp-133000000 { + opp-hz = /bits/ 64 <133000000>; + opp-level = <3>; + }; +}; + +&gpu { + operating-points-v2 = <&gpu_opp_table_3_0>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 0e1bc4669d7e..52df22ab3f6a 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -19,14 +19,14 @@ chosen { }; clocks { - xo_board: xo_board { + xo_board: xo-board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; clock-output-names = "xo_board"; }; - sleep_clk: sleep_clk { + sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32764>; @@ -368,10 +368,10 @@ #hwlock-cells = <1>; }; - memory { + memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the reg */ - reg = <0 0 0 0>; + reg = <0x0 0x80000000 0x0 0x0>; }; psci { @@ -898,6 +898,8 @@ phy-names = "hdmi_phy"; #sound-dai-cells = <1>; + status = "disabled"; + ports { #address-cells = <1>; #size-cells = <0>; @@ -931,6 +933,8 @@ <&gcc GCC_HDMI_CLKREF_CLK>; clock-names = "iface", "ref"; + + status = "disabled"; }; }; @@ -968,6 +972,8 @@ status = "disabled"; + #cooling-cells = <2>; + gpu_opp_table: opp-table { compatible ="operating-points-v2"; @@ -1082,21 +1088,21 @@ camera0_state_on: camera_rear_default: camera-rear-default { - mclk0 { + camera0_mclk: mclk0 { pins = "gpio13"; function = "cam_mclk"; drive-strength = <16>; bias-disable; }; - rst { + camera0_rst: rst { pins = "gpio25"; function = "gpio"; drive-strength = <16>; bias-disable; }; - pwdn { + camera0_pwdn: pwdn { pins = "gpio26"; function = "gpio"; drive-strength = <16>; @@ -1137,14 +1143,14 @@ camera2_state_on: camera_front_default: camera-front-default { - mclk2 { + camera2_mclk: mclk2 { pins = "gpio15"; function = "cam_mclk"; drive-strength = <16>; bias-disable; }; - rst { + camera2_rst: rst { pins = "gpio23"; function = "gpio"; drive-strength = <16>; @@ -2566,7 +2572,7 @@ power-domains = <&gcc USB30_GDSC>; status = "disabled"; - usb@6a00000 { + usb3_dwc3: dwc3@6a00000 { compatible = "snps,dwc3"; reg = <0x06a00000 0xcc00>; interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; @@ -2873,7 +2879,7 @@ qcom,select-utmi-as-pipe-clk; status = "disabled"; - usb@7600000 { + dwc3@7600000 { compatible = "snps,dwc3"; reg = <0x07600000 0xcc00>; interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>; @@ -3205,7 +3211,14 @@ gpu1_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; - type = "hot"; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -3220,7 +3233,14 @@ gpu2_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; - type = "hot"; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu2_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 6f294f9c0cdf..34039b5c8017 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -18,10 +18,10 @@ chosen { }; - memory { + memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the reg */ - reg = <0 0 0 0>; + reg = <0x0 0x80000000 0x0 0x0>; }; reserved-memory { @@ -1964,7 +1964,7 @@ resets = <&gcc GCC_USB_30_BCR>; - usb3_dwc3: usb@a800000 { + usb3_dwc3: dwc3@a800000 { compatible = "snps,dwc3"; reg = <0x0a800000 0xcd00>; interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi index 2e6a6f6c3b66..e847d7209afc 100644 --- a/arch/arm64/boot/dts/qcom/pm660.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -3,9 +3,35 @@ * Copyright (c) 2020, Konrad Dybcio */ +#include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + thermal-zones { + pm660 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pm660_temp>; + + trips { + pm660_alert0: pm660-alert0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + pm660_crit: pm660-crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; &spmi_bus { @@ -37,6 +63,102 @@ }; + pm660_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm660_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm660_adc: adc@3100 { + compatible = "qcom,spmi-adc-rev2"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + ref_gnd: ref_gnd@0 { + reg = <ADC5_REF_GND>; + qcom,decimation = <1024>; + qcom,pre-scaling = <1 1>; + }; + + vref_1p25: vref_1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,decimation = <1024>; + qcom,pre-scaling = <1 1>; + }; + + die_temp: die_temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,decimation = <1024>; + qcom,pre-scaling = <1 1>; + }; + + xo_therm: xo_therm@4c { + reg = <ADC5_XO_THERM_100K_PU>; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + msm_therm: msm_therm@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + emmc_therm: emmc_therm@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + pa_therm0: thermistor0@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + pa_therm1: thermistor1@50 { + reg = <ADC5_AMUX_THM4_100K_PU>; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + quiet_therm: quiet_therm@51 { + reg = <ADC5_AMUX_THM5_100K_PU>; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + + vadc_vph_pwr: vph_pwr@83 { + reg = <ADC5_VPH_PWR>; + qcom,decimation = <1024>; + qcom,pre-scaling = <1 3>; + }; + + vcoin: vcoin@83 { + reg = <ADC5_VCOIN>; + qcom,decimation = <1024>; + qcom,pre-scaling = <1 3>; + }; + }; + pm660_gpios: gpios@c000 { compatible = "qcom,pm660-gpio"; reg = <0xc000>; @@ -47,4 +169,15 @@ #interrupt-cells = <2>; }; }; + + pmic@1 { + compatible = "qcom,pm660", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm660_spmi_regulators: pm660-regulators { + compatible = "qcom,pm660-regulators"; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi index edba6de02084..05086cbe573b 100644 --- a/arch/arm64/boot/dts/qcom/pm660l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi @@ -3,9 +3,35 @@ * Copyright (c) 2020, Konrad Dybcio */ +#include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + thermal-zones { + pm660l { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pm660l_temp>; + + trips { + pm660l_alert0: pm660l-alert0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + pm660l_crit: pm660l-crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; &spmi_bus { @@ -15,6 +41,13 @@ #address-cells = <1>; #size-cells = <0>; + pm660l_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pm660l_gpios: gpios@c000 { compatible = "qcom,pm660l-gpio", "qcom,spmi-gpio"; reg = <0xc000>; @@ -31,6 +64,27 @@ reg = <0x3 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pm660l_wled: leds@d800 { + compatible = "qcom,pm660l-wled"; + reg = <0xd800 0xd900>; + interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ovp"; + label = "backlight"; + + qcom,switching-freq = <800>; + qcom,ovp-millivolt = <29600>; + qcom,current-boost-limit = <970>; + qcom,current-limit-microamp = <20000>; + qcom,num-strings = <2>; + qcom,enabled-strings = <0 1>; + + status = "disabled"; + }; + + pm660l_spmi_regulators: pm660l-regulators { + compatible = "qcom,pm660l-regulators"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8004.dtsi b/arch/arm64/boot/dts/qcom/pm8004.dtsi index 0abd1abe12fc..532b79acf0e8 100644 --- a/arch/arm64/boot/dts/qcom/pm8004.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8004.dtsi @@ -9,7 +9,6 @@ reg = <0x4 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; }; pm8004_lsid5: pmic@5 { @@ -17,7 +16,6 @@ reg = <0x5 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; pm8004_spmi_regulators: regulators { compatible = "qcom,pm8004-regulators"; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index b21e56a46145..058cc5107c75 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -53,6 +53,12 @@ status = "disabled"; }; + pm8150b_vbus: dcdc@1100 { + compatible = "qcom,pm8150b-vbus-reg"; + status = "disabled"; + reg = <0x1100>; + }; + pm8150b_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; diff --git a/arch/arm64/boot/dts/qcom/pmi8996.dtsi b/arch/arm64/boot/dts/qcom/pmi8996.dtsi new file mode 100644 index 000000000000..31b47209e261 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmi8996.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + + /* + * PMI8996 is a slight modification of PMI8994 with + * some notable changes, like being the first PMIC + * whose the bootloader has to check to continue booting + * and a change to a LABIBB parameter. + */ + +/ { + qcom,pmic-id = <0x20009 0x10013 0 0>; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index f8a55307b855..a80c578484ba 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -337,7 +337,7 @@ &usb3 { status = "okay"; - usb@7580000 { + dwc3@7580000 { dr_mode = "host"; }; }; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 9c4be020d568..339790ba585d 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -544,7 +544,7 @@ assigned-clock-rates = <19200000>, <200000000>; status = "disabled"; - usb@7580000 { + dwc3@7580000 { compatible = "snps,dwc3"; reg = <0x07580000 0xcd00>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; @@ -573,7 +573,7 @@ assigned-clock-rates = <19200000>, <133333333>; status = "disabled"; - usb@78c0000 { + dwc3@78c0000 { compatible = "snps,dwc3"; reg = <0x078c0000 0xcc00>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 0da7a3b8d1bf..5ae2ddc65f7e 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -307,10 +307,6 @@ status = "okay"; }; -&tlmm { - gpio-reserved-ranges = <0 4>; -}; - &uart2 { status = "okay"; }; @@ -337,6 +333,16 @@ vdda-pll-max-microamp = <18300>; }; +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; + + pinctrl-names = "default"; + pinctrl-0 = <&usb2phy_ac_en1_default>; +}; &usb_1_hsphy { status = "okay"; @@ -346,15 +352,51 @@ }; &usb_1_qmpphy { + status = "disabled"; +}; + +&usb_2 { status = "okay"; - vdda-phy-supply = <&vreg_l8c_1p2>; - vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; }; -&usb_1 { +&usb_2_dwc3 { + dr_mode = "host"; + + pinctrl-names = "default"; + pinctrl-0 = <&usb2phy_ac_en2_default>; +}; + +&usb_2_hsphy { status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; }; -&usb_1_dwc3 { - dr_mode = "peripheral"; +&usb_2_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l8c_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; + + usb2phy_ac_en1_default: usb2phy_ac_en1_default { + mux { + pins = "gpio113"; + function = "usb2phy_ac"; + bias-disable; + drive-strength = <2>; + }; + }; + + usb2phy_ac_en2_default: usb2phy_ac_en2_default { + mux { + pins = "gpio123"; + function = "usb2phy_ac"; + bias-disable; + drive-strength = <2>; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi index 6f9c07147551..a758e4d22612 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi @@ -23,7 +23,7 @@ ap_h1_spi: &spi0 {}; adau7002: audio-codec-1 { compatible = "adi,adau7002"; IOVDD-supply = <&pp1800_l15a>; - wakeup-delay-ms = <15>; + wakeup-delay-ms = <80>; #sound-dai-cells = <0>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 77ae7561d436..0f2b3c00e434 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -247,29 +247,14 @@ }; }; - max98357a: audio-codec-0 { - compatible = "maxim,max98357a"; + max98360a: audio-codec-0 { + compatible = "maxim,max98360a"; pinctrl-names = "default"; pinctrl-0 = <&_en>; sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>; #sound-dai-cells = <0>; }; - panel: panel { - /* Compatible will be filled in per-board */ - power-supply = <&pp3300_dx_edp>; - backlight = <&backlight>; - hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; - - ports { - port { - panel_in_edp: endpoint { - remote-endpoint = <&sn65dsi86_out>; - }; - }; - }; - }; - pwmleds { compatible = "pwm-leds"; keyboard_backlight: keyboard-backlight { @@ -288,6 +273,7 @@ "Headphone Jack", "HPOL", "Headphone Jack", "HPOR"; + #sound-dai-cells = <0>; #address-cells = <1>; #size-cells = <0>; @@ -311,7 +297,19 @@ }; sound_multimedia1_codec: codec { - sound-dai = <&max98357a>; + sound-dai = <&max98360a>; + }; + }; + + dai-link@2 { + link-name = "MultiMedia2"; + reg = <2>; + cpu { + sound-dai = <&lpass_cpu 2>; + }; + + codec { + sound-dai = <&mdss_dp>; }; }; }; @@ -666,6 +664,21 @@ edp_brij_i2c: &i2c2 { }; }; }; + + aux-bus { + panel: panel { + /* Compatible will be filled in per-board */ + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; }; }; @@ -768,6 +781,10 @@ hp_i2c: &i2c9 { reg = <MI2S_SECONDARY>; qcom,playback-sd-lines = <0>; }; + + hdmi-primary@0 { + reg = <LPASS_DP_RX>; + }; }; &mdp { @@ -778,6 +795,15 @@ hp_i2c: &i2c9 { status = "okay"; }; +&mdss_dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hot_plug_det>; + data-lanes = <0 1>; + vdda-1p2-supply = <&vdda_usb_ss_dp_1p2>; + vdda-0p9-supply = <&vdda_usb_ss_dp_core>; +}; + &pm6150_adc { charger-thermistor@4f { reg = <ADC5_AMUX_THM3_100K_PU>; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index a5d58eb92896..c8921e2d6480 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -110,6 +110,11 @@ no-map; }; + ipa_fw_mem: memory@8b700000 { + reg = <0 0x8b700000 0 0x10000>; + no-map; + }; + rmtfs_mem: memory@94600000 { compatible = "qcom,rmtfs-mem"; reg = <0x0 0x94600000 0x0 0x200000>; @@ -668,7 +673,7 @@ qfprom: efuse@784000 { compatible = "qcom,sc7180-qfprom", "qcom,qfprom"; - reg = <0 0x00784000 0 0x8ff>, + reg = <0 0x00784000 0 0x7a0>, <0 0x00780000 0 0x7a0>, <0 0x00782000 0 0x100>, <0 0x00786000 0 0x1fff>; @@ -786,6 +791,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -838,6 +845,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -890,6 +899,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -924,6 +935,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -976,6 +989,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -1010,6 +1025,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -1075,6 +1092,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -1127,6 +1146,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -1161,6 +1182,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -1213,6 +1236,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -1247,6 +1272,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -1299,6 +1326,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; }; @@ -2756,7 +2785,7 @@ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>; interconnect-names = "usb-ddr", "apps-usb"; - usb_1_dwc3: usb@a600000 { + usb_1_dwc3: dwc3@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xe000>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; @@ -2928,6 +2957,13 @@ remote-endpoint = <&dsi0_in>; }; }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; }; mdp_opp_table: mdp-opp-table { @@ -2977,6 +3013,9 @@ "iface", "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>; + operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SC7180_CX>; @@ -3044,6 +3083,75 @@ status = "disabled"; }; + + mdss_dp: displayport-controller@ae90000 { + compatible = "qcom,sc7180-dp"; + status = "disabled"; + + reg = <0 0x0ae90000 0 0x1400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", "core_aux", "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + #clock-cells = <1>; + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; + phys = <&dp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SC7180_CX>; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + dp_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; }; dispcc: clock-controller@af00000 { @@ -3456,17 +3564,20 @@ #power-domain-cells = <1>; }; - lpass_cpu: lpass@62f00000 { + lpass_cpu: lpass@62d87000 { compatible = "qcom,sc7180-lpass-cpu"; - reg = <0 0x62f00000 0 0x29000>; - reg-names = "lpass-lpaif"; + reg = <0 0x62d87000 0 0x68000>, <0 0x62f00000 0 0x29000>; + reg-names = "lpass-hdmiif", "lpass-lpaif"; iommus = <&apps_smmu 0x1020 0>, - <&apps_smmu 0x1021 0>; + <&apps_smmu 0x1021 0>, + <&apps_smmu 0x1032 0>; power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; + status = "disabled"; + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, <&lpasscc LPASS_AUDIO_CORE_CORE_CLK>, <&lpasscc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>, @@ -3483,8 +3594,9 @@ #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "lpass-irq-lpaif"; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpass-irq-lpaif", "lpass-irq-hdmi"; }; lpass_hm: clock-controller@63000000 { diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts index 3900cfc09562..64fc22aff33d 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -8,17 +8,11 @@ /dts-v1/; #include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> -#include <dt-bindings/iio/qcom,spmi-adc7-pmr735b.h> -#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> -#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> -#include "sc7280.dtsi" -#include "pm7325.dtsi" +#include "sc7280-idp.dtsi" #include "pmr735a.dtsi" -#include "pm8350c.dtsi" -#include "pmk8350.dtsi" / { - model = "Qualcomm Technologies, Inc. sc7280 IDP platform"; + model = "Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform"; compatible = "qcom,sc7280-idp", "google,senor", "qcom,sc7280"; aliases { @@ -31,186 +25,6 @@ }; &apps_rsc { - pm7325-regulators { - compatible = "qcom,pm7325-rpmh-regulators"; - qcom,pmic-id = "b"; - - vreg_s1b_1p8: smps1 { - regulator-min-microvolt = <1856000>; - regulator-max-microvolt = <2040000>; - }; - - vreg_s7b_0p9: smps7 { - regulator-min-microvolt = <535000>; - regulator-max-microvolt = <1120000>; - }; - - vreg_s8b_1p2: smps8 { - regulator-min-microvolt = <1256000>; - regulator-max-microvolt = <1500000>; - }; - - vreg_l1b_0p8: ldo1 { - regulator-min-microvolt = <825000>; - regulator-max-microvolt = <925000>; - }; - - vreg_l2b_3p0: ldo2 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3544000>; - }; - - vreg_l6b_1p2: ldo6 { - regulator-min-microvolt = <1140000>; - regulator-max-microvolt = <1260000>; - }; - - vreg_l7b_2p9: ldo7 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - }; - - vreg_l8b_0p9: ldo8 { - regulator-min-microvolt = <870000>; - regulator-max-microvolt = <970000>; - }; - - vreg_l9b_1p2: ldo9 { - regulator-min-microvolt = <1080000>; - regulator-max-microvolt = <1304000>; - }; - - vreg_l11b_1p7: ldo11 { - regulator-min-microvolt = <1504000>; - regulator-max-microvolt = <2000000>; - }; - - vreg_l12b_0p8: ldo12 { - regulator-min-microvolt = <751000>; - regulator-max-microvolt = <824000>; - }; - - vreg_l13b_0p8: ldo13 { - regulator-min-microvolt = <530000>; - regulator-max-microvolt = <824000>; - }; - - vreg_l14b_1p2: ldo14 { - regulator-min-microvolt = <1080000>; - regulator-max-microvolt = <1304000>; - }; - - vreg_l15b_0p8: ldo15 { - regulator-min-microvolt = <765000>; - regulator-max-microvolt = <1020000>; - }; - - vreg_l16b_1p2: ldo16 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; - }; - - vreg_l17b_1p8: ldo17 { - regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <1900000>; - }; - - vreg_l18b_1p8: ldo18 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2000000>; - }; - - vreg_l19b_1p8: ldo19 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - }; - - pm8350c-regulators { - compatible = "qcom,pm8350c-rpmh-regulators"; - qcom,pmic-id = "c"; - - vreg_s1c_2p2: smps1 { - regulator-min-microvolt = <2190000>; - regulator-max-microvolt = <2210000>; - }; - - vreg_s9c_1p0: smps9 { - regulator-min-microvolt = <1010000>; - regulator-max-microvolt = <1170000>; - }; - - vreg_l1c_1p8: ldo1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1980000>; - }; - - vreg_l2c_1p8: ldo2 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <1980000>; - }; - - vreg_l3c_3p0: ldo3 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3540000>; - }; - - vreg_l4c_1p8: ldo4 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <3300000>; - }; - - vreg_l5c_1p8: ldo5 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <3300000>; - }; - - vreg_l6c_2p9: ldo6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - vreg_l7c_3p0: ldo7 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3544000>; - }; - - vreg_l8c_1p8: ldo8 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <2000000>; - }; - - vreg_l9c_2p9: ldo9 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - }; - - vreg_l10c_0p8: ldo10 { - regulator-min-microvolt = <720000>; - regulator-max-microvolt = <1050000>; - }; - - vreg_l11c_2p8: ldo11 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3544000>; - }; - - vreg_l12c_1p8: ldo12 { - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <2000000>; - }; - - vreg_l13c_3p0: ldo13 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3544000>; - }; - - vreg_bob: bob { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3960000>; - }; - }; - pmr735a-regulators { compatible = "qcom,pmr735a-rpmh-regulators"; qcom,pmic-id = "e"; @@ -242,52 +56,15 @@ }; }; -&pmk8350_vadc { - pm8350_die_temp { - reg = <PM8350_ADC7_DIE_TEMP>; - label = "pm8350_die_temp"; - qcom,pre-scaling = <1 1>; - }; - - pmk8350_die_temp { - reg = <PMK8350_ADC7_DIE_TEMP>; - label = "pmk8350_die_temp"; - qcom,pre-scaling = <1 1>; - }; - - pmr735a_die_temp { - reg = <PMR735A_ADC7_DIE_TEMP>; - label = "pmr735a_die_temp"; - qcom,pre-scaling = <1 1>; - }; - - pmr735b_die_temp { - reg = <PMR735B_ADC7_DIE_TEMP>; - label = "pmr735b_die_temp"; - qcom,pre-scaling = <1 1>; - }; -}; - -&qupv3_id_0 { +&ipa { status = "okay"; + modem-init; }; -&uart5 { - status = "okay"; -}; - -/* PINCTRL - additions to nodes defined in sc7280.dtsi */ - -&qup_uart5_default { - tx { - pins = "gpio46"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio47"; - drive-strength = <2>; - bias-pull-up; +&pmk8350_vadc { + pmr735a_die_temp { + reg = <PMR735A_ADC7_DIE_TEMP>; + label = "pmr735a_die_temp"; + qcom,pre-scaling = <1 1>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi new file mode 100644 index 000000000000..371a2a9dcf7a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -0,0 +1,341 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 IDP board device tree source (common between SKU1 and SKU2) + * + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include "sc7280.dtsi" +#include "pm7325.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" + +&apps_rsc { + pm7325-regulators { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vreg_s1b_1p8: smps1 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7b_0p9: smps7 { + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s8b_1p2: smps8 { + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1500000>; + }; + + vreg_l1b_0p8: ldo1 { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + }; + + vreg_l7b_2p9: ldo7 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l8b_0p9: ldo8 { + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l11b_1p7: ldo11 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l12b_0p8: ldo12 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + }; + + vreg_l13b_0p8: ldo13 { + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <824000>; + }; + + vreg_l14b_1p2: ldo14 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l15b_0p8: ldo15 { + regulator-min-microvolt = <765000>; + regulator-max-microvolt = <1020000>; + }; + + vreg_l16b_1p2: ldo16 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + }; + + vreg_l17b_1p8: ldo17 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + }; + + vreg_l18b_1p8: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l19b_1p8: ldo19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pm8350c-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s1c_2p2: smps1 { + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + }; + + vreg_s9c_1p0: smps9 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + }; + + vreg_l2c_1p8: ldo2 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + }; + + vreg_l3c_3p0: ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3540000>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l10c_0p8: ldo10 { + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + }; + + vreg_l11c_2p8: ldo11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + }; + + vreg_l12c_1p8: ldo12 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l13c_3p0: ldo13 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + }; + }; +}; + +&ipa { + status = "okay"; + modem-init; +}; + +&pmk8350_vadc { + pmk8350_die_temp { + reg = <PMK8350_ADC7_DIE_TEMP>; + label = "pmk8350_die_temp"; + qcom,pre-scaling = <1 1>; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; + + non-removable; + no-sd; + no-sdio; + + vmmc-supply = <&vreg_l7b_2p9>; + vqmmc-supply = <&vreg_l19b_1p8>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + + vmmc-supply = <&vreg_l9c_2p9>; + vqmmc-supply = <&vreg_l6c_2p9>; + + cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; +}; + +&uart5 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l10c_0p8>; + vdda33-supply = <&vreg_l2b_3p0>; + vdda18-supply = <&vreg_l1c_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p8>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l10c_0p8>; + vdda33-supply = <&vreg_l2b_3p0>; + vdda18-supply = <&vreg_l1c_1p8>; +}; + +/* PINCTRL - additions to nodes defined in sc7280.dtsi */ + +&qup_uart5_default { + tx { + pins = "gpio46"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio47"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdc1_on { + clk { + bias-disable; + drive-strength = <16>; + }; + + cmd { + bias-pull-up; + drive-strength = <10>; + }; + + data { + bias-pull-up; + drive-strength = <10>; + }; + + rclk { + bias-pull-down; + }; +}; + +&sdc2_on { + clk { + bias-disable; + drive-strength = <16>; + }; + + cmd { + bias-pull-up; + drive-strength = <10>; + }; + + data { + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd { + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts new file mode 100644 index 000000000000..1fc2addc8ab6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 IDP2 board device tree source + * + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sc7280-idp.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform"; + compatible = "qcom,sc7280-idp2", "google,piglin", "qcom,sc7280"; + + aliases { + serial0 = &uart5; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index a8c274ad74c4..53a21d086178 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/clock/qcom,gcc-sc7280.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interconnect/qcom,sc7280.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-aoss-qmp.h> @@ -24,6 +25,11 @@ chosen { }; + aliases { + mmc1 = &sdhc_1; + mmc2 = &sdhc_2; + }; + clocks { xo_board: xo-board { compatible = "fixed-clock"; @@ -63,6 +69,11 @@ no-map; reg = <0x0 0x80b00000 0x0 0x100000>; }; + + ipa_fw_mem: memory@8b700000 { + reg = <0 0x8b700000 0 0x10000>; + no-map; + }; }; cpus { @@ -200,7 +211,7 @@ &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_700>; - qcom,freq-domain = <&cpufreq_hw 1>; + qcom,freq-domain = <&cpufreq_hw 2>; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; @@ -436,6 +447,73 @@ #mbox-cells = <2>; }; + qfprom: efuse@784000 { + compatible = "qcom,sc7280-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0xa20>, + <0 0x00780000 0 0xa20>, + <0 0x00782000 0 0x120>, + <0 0x00786000 0 0x1fff>; + clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>; + clock-names = "core"; + power-domains = <&rpmhpd SC7280_MX>; + #address-cells = <1>; + #size-cells = <1>; + }; + + sdhc_1: sdhci@7c4000 { + compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; + status = "disabled"; + + reg = <0 0x007c4000 0 0x1000>, + <0 0x007c5000 0 0x1000>; + reg-names = "hc", "cqhci"; + + iommus = <&apps_smmu 0xc0 0x0>; + interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "core", "iface", "xo"; + interconnects = <&aggre1_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_1 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&sdhc1_opp_table>; + + bus-width = <8>; + supports-cqe; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1800000 400000>; + opp-avg-kBps = <100000 0>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <5400000 1600000>; + opp-avg-kBps = <390000 0>; + }; + }; + + }; + qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x009c0000 0 0x2000>; @@ -508,6 +586,43 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + ipa: ipa@1e40000 { + compatible = "qcom,sc7280-ipa"; + + iommus = <&apps_smmu 0x480 0x0>, + <&apps_smmu 0x482 0x0>; + reg = <0 0x1e40000 0 0x8000>, + <0 0x1e50000 0 0x4ad0>, + <0 0x1e04000 0 0x23000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc 0 654 IRQ_TYPE_EDGE_RISING>, + <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_IPA_CFG 0>; + interconnect-names = "memory", + "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex", "syscon"; reg = <0 0x01f40000 0 0x40000>; @@ -1035,6 +1150,174 @@ }; }; + sdhc_2: sdhci@8804000 { + compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; + status = "disabled"; + + reg = <0 0x08804000 0 0x1000>; + + iommus = <&apps_smmu 0x100 0x0>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "core", "iface", "xo"; + interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + bus-width = <4>; + + qcom,dll-config = <0x0007642c>; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1800000 400000>; + opp-avg-kBps = <100000 0>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <5400000 1600000>; + opp-avg-kBps = <200000 0>; + }; + }; + + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sc7280-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_2_hsphy: phy@88e4000 { + compatible = "qcom,sc7280-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e4000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + }; + + usb_1_qmpphy: phy-wrapper@88e9000 { + compatible = "qcom,sc7280-qmp-usb3-dp-phy", + "qcom,sm8250-qmp-usb3-dp-phy"; + reg = <0 0x088e9000 0 0x200>, + <0 0x088e8000 0 0x40>, + <0 0x088ea000 0 0x200>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: usb3-phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x400>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + + dp_phy: dp-phy@88ea200 { + reg = <0 0x088ea200 0 0x200>, + <0 0x088ea400 0 0x200>, + <0 0x088eac00 0 0x400>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>, + <0 0x088eaa00 0 0x100>; + #phy-cells = <0>; + #clock-cells = <1>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + usb_2: usb@8cf8800 { + compatible = "qcom,sc7280-dwc3", "qcom,dwc3"; + reg = <0 0x08cf8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface","mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 13 IRQ_TYPE_EDGE_RISING>, + <&pdc 12 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "hs_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc GCC_USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB2 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + usb_2_dwc3: usb@8c00000 { + compatible = "snps,dwc3"; + reg = <0 0x08c00000 0 0xe000>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0xa0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_2_hsphy>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + }; + }; + dc_noc: interconnect@90e0000 { reg = <0 0x090e0000 0 0x5080>; compatible = "qcom,sc7280-dc-noc"; @@ -1063,6 +1346,55 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + usb_1: usb@a6f8800 { + compatible = "qcom,sc7280-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xe000>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0xe0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + maximum-speed = "super-speed"; + }; + }; + videocc: clock-controller@aaf0000 { compatible = "qcom,sc7280-videocc"; reg = <0 0xaaf0000 0 0x10000>; @@ -1185,6 +1517,87 @@ pins = "gpio46", "gpio47"; function = "qup13"; }; + + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + }; + + cmd { + pins = "sdc1_cmd"; + }; + + data { + pins = "sdc1_data"; + }; + + rclk { + pins = "sdc1_rclk"; + }; + }; + + sdc1_off: sdc1-off { + clk { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-bus-hold; + }; + + cmd { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-bus-hold; + }; + + data { + pins = "sdc1_data"; + drive-strength = <2>; + bias-bus-hold; + }; + + rclk { + pins = "sdc1_rclk"; + bias-bus-hold; + }; + }; + + sdc2_on: sdc2-on { + clk { + pins = "sdc2_clk"; + }; + + cmd { + pins = "sdc2_cmd"; + }; + + data { + pins = "sdc2_data"; + }; + + sd-cd { + pins = "gpio91"; + }; + }; + + sdc2_off: sdc2-off { + clk { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-bus-hold; + }; + + cmd { + pins ="sdc2_cmd"; + drive-strength = <2>; + bias-bus-hold; + }; + + data { + pins ="sdc2_data"; + drive-strength = <2>; + bias-bus-hold; + }; + }; }; apps_smmu: iommu@15000000 { @@ -1437,9 +1850,9 @@ cpufreq_hw: cpufreq@18591000 { compatible = "qcom,cpufreq-epss"; - reg = <0 0x18591000 0 0x1000>, - <0 0x18592000 0 0x1000>, - <0 0x18593000 0 0x1000>; + reg = <0 0x18591100 0 0x900>, + <0 0x18592100 0 0x900>, + <0 0x18593100 0 0x900>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; clock-names = "xo", "alternate"; #freq-domain-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts index 46a7f2b26e6b..a4e1fb8ca52d 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts @@ -5,9 +5,21 @@ /dts-v1/; -#include "sdm630-sony-xperia-ganges.dtsi" +#include "sdm630.dtsi" +#include "sdm630-sony-xperia-nile.dtsi" / { model = "Sony Xperia 10"; compatible = "sony,kirin-row", "qcom,sdm630"; + + chosen { + framebuffer@9d400000 { + reg = <0 0x9d400000 0 (2520 * 1080 * 4)>; + height = <2520>; + }; + }; }; + +/* Ganges devices feature a Novatek touchscreen instead. */ +/delete-node/ &touchscreen; +/delete-node/ &vreg_l18a_1v8; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi deleted file mode 100644 index cf2e8b5d60e8..000000000000 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi +++ /dev/null @@ -1,40 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2020, Martin Botka - */ - -/dts-v1/; - -/* Ganges is very similar to Nile, but - * there are some differences that will need - * to be addresed when more peripherals are - * enabled upstream. Hence the separate DTSI. - */ -#include "sdm630-sony-xperia-nile.dtsi" - -/ { - chosen { - framebuffer@9d400000 { - reg = <0 0x9d400000 0 (2520 * 1080 * 4)>; - height = <2520>; - }; - }; - - /* Yes, this is intentional. - * Ganges devices only use gpio-keys for - * Volume Down, but currently there's an - * issue with it that has to be resolved. - * Until then, let's not make the kernel panic - */ - /delete-node/ gpio-keys; - - soc { - - i2c@c175000 { - status = "okay"; - - /* Novatek touchscreen */ - }; - }; - -}; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts index 8fca0b69fa01..c574e430ba67 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include "sdm630.dtsi" #include "sdm630-sony-xperia-nile.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts index 90dcd4ebaaed..a93ff3ab1b6d 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include "sdm630.dtsi" #include "sdm630-sony-xperia-nile.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts index fae5f1bb6834..59a679c205e0 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include "sdm630.dtsi" #include "sdm630-sony-xperia-nile.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index 9ba359c848d0..849900e8b80e 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -1,11 +1,10 @@ // SPDX-License-Identifier: BSD-3-Clause /* - * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> + * Copyright (c) 2020, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> */ -/dts-v1/; - -#include "sdm630.dtsi" #include "pm660.dtsi" #include "pm660l.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -39,13 +38,61 @@ }; }; + board_vbat: vbat-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <4000000>; + regulator-always-on; + regulator-boot-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + + regulator-always-on; + regulator-boot-on; + }; + + cam_vdig_imx300_219_vreg: cam_vdig_imx300_219_vreg { + compatible = "regulator-fixed"; + regulator-name = "cam_vdig_imx300_219_vreg"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam_vdig_default>; + }; + + cam_vana_front_vreg: cam_vana_front_vreg { + compatible = "regulator-fixed"; + regulator-name = "cam_vana_front_vreg"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&imx219_vana_default>; + }; + + cam_vana_rear_vreg: cam_vana_rear_vreg { + compatible = "regulator-fixed"; + regulator-name = "cam_vana_rear_vreg"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>; + regulator-always-on; + pinctrl-names = "default"; + pinctrl-0 = <&imx300_vana_default>; + }; + gpio_keys { status = "okay"; compatible = "gpio-keys"; input-name = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - autorepeat; camera_focus { label = "Camera Focus"; @@ -100,37 +147,471 @@ }; }; - soc { - sdhci@c0c4000 { - status = "okay"; + /* + * Until we hook up type-c detection, we + * have to stick with this. But it works. + */ + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>; + }; +}; + +&adsp_pil { + firmware-name = "adsp.mdt"; +}; + +&blsp_i2c1 { + status = "okay"; + + touchscreen: synaptics-rmi4-i2c@70 { + compatible = "syna,rmi4-i2c"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&tlmm 45 0x2008>; - mmc-ddr-1_8v; - /* SoMC Nile platform's eMMC doesn't support HS200 mode */ - mmc-hs400-1_8v; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_active &ts_lcd_id_active>; + + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <220>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; }; - i2c@c175000 { - status = "okay"; + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + /* SMB1351 charger */ +}; + +/* I2C3, 4, 5, 7 and 8 are disabled on this board. */ + +&blsp_i2c6 { + status = "okay"; + + /* NXP NFC */ +}; + +&blsp1_uart2 { + status = "okay"; + + /* MSM serial console */ +}; + +&blsp2_uart1 { + status = "okay"; - /* Synaptics touchscreen */ + /* HCI Bluetooth */ +}; + +&pon { + volup { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEUP>; + }; +}; + +&qusb2phy { + status = "okay"; + + vdd-supply = <&vreg_l1b_0p925>; + vdda-pll-supply = <&vreg_l10a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; +}; + +&rpm_requests { + pm660l-regulators { + compatible = "qcom,rpm-pm660l-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + + vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>; + vdd_l2-supply = <&vreg_bob>; + vdd_l3_l5_l7_l8-supply = <&vreg_bob>; + vdd_l4_l6-supply = <&vreg_bob>; + vdd_bob-supply = <&vph_pwr>; + + vreg_s1b_1p125: s1 { + regulator-min-microvolt = <1125000>; + regulator-max-microvolt = <1125000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; }; - i2c@c176000 { - status = "okay"; + vreg_s2b_1p05: s2 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + }; + + /* + * At least on Nile's configuration, S3B/S4B (VDD_CX) and + * S5B (VDD_MX) are managed only through RPM Power Domains. + * Trying to set a voltage on the main supply will create + * havoc and freeze the SoC. + * In any case, reference voltages for these regulators are: + * S3B/S4B: 0.870V + * S5B: 0.915V + */ - /* SMB1351 charger */ + /* LDOs */ + vreg_l1b_0p925: l1 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <928000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; }; - serial@c1af000 { - status = "okay"; + vreg_l2b_2p95: l2 { + /* + * This regulator supports 1.648 - 3.104V on this board + * but we set a max voltage of anything less than 2.7V + * to satisfy a condition in sdhci.c that will disable + * 3.3V SDHCI signaling, which happens to be not really + * supported on the Xperia Nile/Ganges platform. + */ + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2696000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; }; - /* I2C3, 4, 5, 7 and 8 are disabled on this board. */ + vreg_l3b_3p0: l3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-min-microamp = <200>; + regulator-max-microamp = <600000>; + regulator-system-load = <100000>; + regulator-allow-set-load; + }; - i2c@c1b6000 { - status = "okay"; + vreg_l4b_29p5: l4 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2952000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + + regulator-min-microamp = <200>; + regulator-max-microamp = <600000>; + regulator-system-load = <570000>; + regulator-allow-set-load; + }; + + /* + * Downstream specifies a range of 1721-3600mV, + * but the only assigned consumers are SDHCI2 VMMC + * and Coresight QPDI that both request pinned 2.95V. + * Tighten the range to 1.8-3.328 (closest to 3.3) to + * make the mmc driver happy. + */ + vreg_l5b_29p5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3328000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + regulator-system-load = <800000>; + }; + + vreg_l6b_3p3: l6 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3312000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l7b_3p125: l7 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3128000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l8b_3p3: l8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3400000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + /* L9B (870mV) is currently unused */ + /* L10B (915mV) is currently unused */ + + vreg_bob: bob { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3624000>; + regulator-enable-ramp-delay = <500>; + regulator-ramp-delay = <0>; + }; + }; + + pm660-regulators { + compatible = "qcom,rpm-pm660-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + + vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>; + vdd_l2_l3-supply = <&vreg_s2b_1p05>; + vdd_l5-supply = <&vreg_s2b_1p05>; + vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>; + vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>; + + /* + * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed + * by the Core Power Reduction hardened (CPRh) and the + * Operating State Manager (OSM) HW automatically. + */ + + vreg_s4a_2p04: s4 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + regulator-always-on; + }; + + vreg_s5a_1p35: s5 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1350000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + }; + + vreg_s6a_0p87: s6 { + regulator-min-microvolt = <504000>; + regulator-max-microvolt = <992000>; + regulator-enable-ramp-delay = <150>; + regulator-ramp-delay = <0>; + }; + + /* LDOs */ + vreg_l1a_1p225: l1 { + regulator-min-microvolt = <1226000>; + regulator-max-microvolt = <1250000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l2a_1p0: l2 { + regulator-min-microvolt = <944000>; + regulator-max-microvolt = <1008000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <944000>; + regulator-max-microvolt = <1008000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l5a_0p848: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <952000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l6a_1p3: l6 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1368000>; + regulator-allow-set-load; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l7a_1p2: l7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l8a_1p8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-system-load = <325000>; + regulator-allow-set-load; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1804000>; + regulator-max-microvolt = <1896000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1944000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l11a_1p8: l11 { + regulator-min-microvolt = <1784000>; + regulator-max-microvolt = <1944000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1944000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; - /* NXP NFC */ + /* This gives power to the LPDDR4: never turn it off! */ + vreg_l13a_1p8: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1944000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-boot-on; + regulator-always-on; }; + + vreg_l14a_1p8: l14 { + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1904000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + /* L16A (2.70V) is unused */ + + vreg_l17a_1p8: l17 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_l18a_1v8: l18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <10>; + regulator-min-microamp = <200>; + regulator-max-microamp = <50000>; + regulator-system-load = <10000>; + regulator-allow-set-load; + }; + + vreg_l19a_3p3: l19 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3400000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + }; +}; + +&sdhc_1 { + status = "okay"; + supports-cqe; + + /* SoMC Nile platform's eMMC doesn't support HS200 mode */ + mmc-ddr-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + + vmmc-supply = <&vreg_l4b_29p5>; + vqmmc-supply = <&vreg_l8a_1p8>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&vreg_l5b_29p5>; + vqmmc-supply = <&vreg_l2b_2p95>; +}; + +&tlmm { + gpio-reserved-ranges = <8 4>; + + ts_int_active: ts-int-active { + pins = "gpio45"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_lcd_id_active: ts-lcd-id-active { + pins = "gpio56"; + drive-strength = <8>; + bias-disable; + }; + + imx300_vana_default: imx300-vana-default { + pins = "gpio50"; + function = "gpio"; + bias-disable; + drive-strength = <2>; }; + + imx219_vana_default: imx219-vana-default { + pins = "gpio51"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + cam_vdig_default: cam-vdig-default { + pins = "gpio52"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; + extcon = <&extcon_usb>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index f91a928466c3..9153e6616ba4 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -1,12 +1,17 @@ // SPDX-License-Identifier: BSD-3-Clause /* - * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, Konrad Dybcio <konradybcio@gmail.com> + * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com> */ #include <dt-bindings/clock/qcom,gcc-sdm660.h> +#include <dt-bindings/clock/qcom,gpucc-sdm660.h> +#include <dt-bindings/clock/qcom,mmcc-sdm660.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/qcom,apr.h> / { interrupt-parent = <&intc>; @@ -17,14 +22,14 @@ chosen { }; clocks { - xo_board: xo_board { + xo_board: xo-board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; clock-output-names = "xo_board"; }; - sleep_clk: sleep_clk { + sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32764>; @@ -311,10 +316,10 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the reg */ - reg = <0 0 0 0>; + reg = <0x0 0x80000000 0x0 0x0>; }; pmu { @@ -343,10 +348,19 @@ }; qhee_code: qhee-code@85800000 { - reg = <0x0 0x85800000 0x0 0x3700000>; + reg = <0x0 0x85800000 0x0 0x600000>; no-map; }; + rmtfs_mem: memory@85e00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x85e00000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + smem_region: smem-mem@86000000 { reg = <0 0x86000000 0 0x200000>; no-map; @@ -357,58 +371,44 @@ no-map; }; - modem_fw_mem: modem-fw-region@8ac00000 { + mpss_region: mpss@8ac00000 { reg = <0x0 0x8ac00000 0x0 0x7e00000>; no-map; }; - adsp_fw_mem: adsp-fw-region@92a00000 { + adsp_region: adsp@92a00000 { reg = <0x0 0x92a00000 0x0 0x1e00000>; no-map; }; - pil_mba_mem: pil-mba-region@94800000 { + mba_region: mba@94800000 { reg = <0x0 0x94800000 0x0 0x200000>; no-map; }; - buffer_mem: buffer-region@94a00000 { + buffer_mem: tzbuffer@94a00000 { reg = <0x0 0x94a00000 0x0 0x100000>; no-map; }; - venus_fw_mem: venus-fw-region@9f800000 { + venus_region: venus@9f800000 { reg = <0x0 0x9f800000 0x0 0x800000>; no-map; }; - secure_region2: secure-region2@f7c00000 { - reg = <0x0 0xf7c00000 0x0 0x5c00000>; - no-map; - }; - adsp_mem: adsp-region@f6000000 { reg = <0x0 0xf6000000 0x0 0x800000>; no-map; }; - qseecom_ta_mem: qseecom-ta-region@fec00000 { - reg = <0x0 0xfec00000 0x0 0x1000000>; - no-map; - }; - qseecom_mem: qseecom-region@f6800000 { reg = <0x0 0xf6800000 0x0 0x1400000>; no-map; }; - secure_display_memory: secure-region@f5c00000 { - reg = <0x0 0xf5c00000 0x0 0x5c00000>; - no-map; - }; - - cont_splash_mem: cont-splash-region@9d400000 { - reg = <0x0 0x9d400000 0x0 0x23ff000>; + zap_shader_region: gpu@fed00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xfed00000 0x0 0xa00000>; no-map; }; }; @@ -428,6 +428,52 @@ compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc"; #clock-cells = <1>; }; + + rpmpd: power-controller { + compatible = "qcom,sdm660-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <RPM_SMD_LEVEL_RETENTION>; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + }; + + rpmpd_opp_svs: opp5 { + opp-level = <RPM_SMD_LEVEL_SVS>; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + }; + + rpmpd_opp_nom: opp7 { + opp-level = <RPM_SMD_LEVEL_NOM>; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = <RPM_SMD_LEVEL_TURBO>; + }; + }; + }; }; }; @@ -437,6 +483,46 @@ hwlocks = <&tcsr_mutex 3>; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs_glb 10>; + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs_glb 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -465,6 +551,16 @@ reg = <0x00780000 0x621c>; #address-cells = <1>; #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@240 { + reg = <0x240 0x1>; + bits = <25 3>; + }; + + gpu_speed_bin: gpu-speed-bin@41a0 { + reg = <0x41a0 0x1>; + bits = <21 7>; + }; }; rng: rng@793000 { @@ -474,17 +570,49 @@ clock-names = "core"; }; + bimc: interconnect@1008000 { + compatible = "qcom,sdm660-bimc"; + reg = <0x01008000 0x78000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + restart@10ac000 { compatible = "qcom,pshold"; reg = <0x010ac000 0x4>; }; + cnoc: interconnect@1500000 { + compatible = "qcom,sdm660-cnoc"; + reg = <0x01500000 0x10000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_CNOC_CLK>, + <&rpmcc RPM_SMD_CNOC_A_CLK>; + }; + + snoc: interconnect@1626000 { + compatible = "qcom,sdm660-snoc"; + reg = <0x01626000 0x7090>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + anoc2_smmu: iommu@16c0000 { compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; reg = <0x016c0000 0x40000>; - #iommu-cells = <1>; + assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + assigned-clock-rates = <1000>; + clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + clock-names = "bus"; #global-interrupts = <2>; + #iommu-cells = <1>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, @@ -522,19 +650,53 @@ status = "disabled"; }; + a2noc: interconnect@1704000 { + compatible = "qcom,sdm660-a2noc"; + reg = <0x01704000 0xc100>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, + <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>; + }; + + mnoc: interconnect@1745000 { + compatible = "qcom,sdm660-mnoc"; + reg = <0x01745000 0xA010>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a", "iface"; + clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>, + <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>, + <&mmcc AHB_CLK_SRC>; + }; + + tsens: thermal-sensor@10ae000 { + compatible = "qcom,sdm630-tsens", "qcom,tsens-v2"; + reg = <0x010ae000 0x1000>, /* TM */ + <0x010ad000 0x1000>; /* SROT */ + #qcom,sensors = <12>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; - reg = <0x01f40000 0x20000>; + reg = <0x01f40000 0x40000>; }; - tlmm: pinctrl@3000000 { + tlmm: pinctrl@3100000 { compatible = "qcom,sdm630-pinctrl"; - reg = <0x03000000 0xc00000>; + reg = <0x03100000 0x400000>, + <0x03500000 0x400000>, + <0x03900000 0x400000>; + reg-names = "south", "center", "north"; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; - #gpio-cells = <0x2>; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <0x2>; + #interrupt-cells = <2>; blsp1_uart1_default: blsp1-uart1-default { pins = "gpio0", "gpio1", "gpio2", "gpio3"; @@ -554,191 +716,392 @@ bias-disable; }; - blsp2_uart1_tx_active: blsp2-uart1-tx-active { - pins = "gpio16"; - drive-strength = <2>; - bias-disable; - }; - - blsp2_uart1_tx_sleep: blsp2-uart1-tx-sleep { - pins = "gpio16"; - drive-strength = <2>; - bias-pull-up; - }; + blsp2_uart1_default: blsp2-uart1-active { + tx-rts { + pins = "gpio16", "gpio19"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-disable; + }; - blsp2_uart1_rxcts_active: blsp2-uart1-rxcts-active { - pins = "gpio17", "gpio18"; - drive-strength = <2>; - bias-disable; - }; + rx { + /* + * Avoid garbage data while BT module + * is powered off or not driving signal + */ + pins = "gpio17"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-pull-up; + }; - blsp2_uart1_rxcts_sleep: blsp2-uart1-rxcts-sleep { - pins = "gpio17", "gpio18"; - drive-strength = <2>; - bias-no-pull; + cts { + /* Match the pull of the BT module */ + pins = "gpio18"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-pull-down; + }; }; - blsp2_uart1_rfr_active: blsp2-uart1-rfr-active { - pins = "gpio19"; - drive-strength = <2>; - bias-disable; - }; + blsp2_uart1_sleep: blsp2-uart1-sleep { + tx { + pins = "gpio16"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; - blsp2_uart1_rfr_sleep: blsp2-uart1-rfr-sleep { - pins = "gpio19"; - drive-strength = <2>; - bias-no-pull; + rx-cts-rts { + pins = "gpio17", "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-no-pull; + }; }; i2c1_default: i2c1-default { pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; drive-strength = <2>; bias-disable; }; i2c1_sleep: i2c1-sleep { pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; drive-strength = <2>; bias-pull-up; }; i2c2_default: i2c2-default { pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; drive-strength = <2>; bias-disable; }; i2c2_sleep: i2c2-sleep { pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; drive-strength = <2>; bias-pull-up; }; i2c3_default: i2c3-default { pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; drive-strength = <2>; bias-disable; }; i2c3_sleep: i2c3-sleep { pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; drive-strength = <2>; bias-pull-up; }; i2c4_default: i2c4-default { pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; drive-strength = <2>; bias-disable; }; i2c4_sleep: i2c4-sleep { pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; drive-strength = <2>; bias-pull-up; }; i2c5_default: i2c5-default { pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; drive-strength = <2>; bias-disable; }; i2c5_sleep: i2c5-sleep { pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; drive-strength = <2>; bias-pull-up; }; i2c6_default: i2c6-default { pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; drive-strength = <2>; bias-disable; }; i2c6_sleep: i2c6-sleep { pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; drive-strength = <2>; bias-pull-up; }; i2c7_default: i2c7-default { pins = "gpio26", "gpio27"; + function = "blsp_i2c7"; drive-strength = <2>; bias-disable; }; i2c7_sleep: i2c7-sleep { pins = "gpio26", "gpio27"; + function = "blsp_i2c7"; drive-strength = <2>; bias-pull-up; }; i2c8_default: i2c8-default { pins = "gpio30", "gpio31"; + function = "blsp_i2c8"; drive-strength = <2>; bias-disable; }; i2c8_sleep: i2c8-sleep { pins = "gpio30", "gpio31"; + function = "blsp_i2c8"; drive-strength = <2>; bias-pull-up; }; - sdc1_clk_on: sdc1-clk-on { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <16>; - }; + cci0_default: cci0_default { + pinmux { + pins = "gpio36","gpio37"; + function = "cci_i2c"; + }; - sdc1_clk_off: sdc1-clk-off { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <2>; + pinconf { + pins = "gpio36","gpio37"; + bias-pull-up; + drive-strength = <2>; + }; }; - sdc1_cmd_on: sdc1-cmd-on { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <10>; + cci1_default: cci1_default { + pinmux { + pins = "gpio38","gpio39"; + function = "cci_i2c"; + }; + + pinconf { + pins = "gpio38","gpio39"; + bias-pull-up; + drive-strength = <2>; + }; }; - sdc1_cmd_off: sdc1-cmd-off { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <2>; + sdc1_state_on: sdc1-on { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; }; - sdc1_data_on: sdc1-data-on { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <8>; + sdc1_state_off: sdc1-off { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; }; - sdc1_data_off: sdc1-data-off { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <2>; + sdc2_state_on: sdc2-on { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd { + pins = "gpio54"; + bias-pull-up; + drive-strength = <2>; + }; }; - sdc1_rclk_on: sdc1-rclk-on { - pins = "sdc1_rclk"; - bias-pull-down; + sdc2_state_off: sdc2-off { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sd-cd { + pins = "gpio54"; + bias-disable; + drive-strength = <2>; + }; }; + }; + + adreno_gpu: gpu@5000000 { + compatible = "qcom,adreno-508.0", "qcom,adreno"; + #stream-id-cells = <16>; + + reg = <0x05000000 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; - sdc1_rclk_off: sdc1-rclk-off { - pins = "sdc1_rclk"; - bias-pull-down; + interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, + <&gpucc GPUCC_RBBMTIMER_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_GPU_BIMC_GFX_CLK>, + <&gpucc GPUCC_RBCPR_CLK>, + <&gpucc GPUCC_GFX3D_CLK>; + + clock-names = "iface", + "rbbmtimer", + "mem", + "mem_iface", + "rbcpr", + "core"; + + power-domains = <&rpmpd SDM660_VDDMX>; + iommus = <&kgsl_smmu 0>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + + interconnects = <&gnoc 1 &bimc 5>; + interconnect-names = "gfx-mem"; + + operating-points-v2 = <&gpu_sdm630_opp_table>; + + gpu_sdm630_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-775000000 { + opp-hz = /bits/ 64 <775000000>; + opp-level = <RPM_SMD_LEVEL_TURBO>; + opp-peak-kBps = <5412000>; + opp-supported-hw = <0xA2>; + }; + opp-647000000 { + opp-hz = /bits/ 64 <647000000>; + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + opp-peak-kBps = <4068000>; + opp-supported-hw = <0xFF>; + }; + opp-588000000 { + opp-hz = /bits/ 64 <588000000>; + opp-level = <RPM_SMD_LEVEL_NOM>; + opp-peak-kBps = <3072000>; + opp-supported-hw = <0xFF>; + }; + opp-465000000 { + opp-hz = /bits/ 64 <465000000>; + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + opp-peak-kBps = <2724000>; + opp-supported-hw = <0xFF>; + }; + opp-370000000 { + opp-hz = /bits/ 64 <370000000>; + opp-level = <RPM_SMD_LEVEL_SVS>; + opp-peak-kBps = <2188000>; + opp-supported-hw = <0xFF>; + }; + opp-240000000 { + opp-hz = /bits/ 64 <240000000>; + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + opp-peak-kBps = <1648000>; + opp-supported-hw = <0xFF>; + }; + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + opp-peak-kBps = <1200000>; + opp-supported-hw = <0xFF>; + }; }; }; kgsl_smmu: iommu@5040000 { - compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; + compatible = "qcom,sdm630-smmu-v2", + "qcom,adreno-smmu", "qcom,smmu-v2"; reg = <0x05040000 0x10000>; - #iommu-cells = <1>; + /* + * GX GDSC parent is CX. We need to bring up CX for SMMU + * but we need both up for Adreno. On the other hand, we + * need to manage the GX rpmpd domain in the adreno driver. + * Enable CX/GX GDSCs here so that we can manage just the GX + * RPM Power Domain in the Adreno driver. + */ + power-domains = <&gpucc GPU_GX_GDSC>; + clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_GPU_BIMC_GFX_CLK>; + clock-names = "iface", "mem", "mem_iface"; #global-interrupts = <2>; + #iommu-cells = <1>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, @@ -755,6 +1118,22 @@ status = "disabled"; }; + gpucc: clock-controller@5065000 { + compatible = "qcom,gpucc-sdm630"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x05065000 0x9038>; + + clocks = <&xo_board>, + <&gcc GCC_GPU_GPLL0_CLK>, + <&gcc GCC_GPU_GPLL0_DIV_CLK>; + clock-names = "xo", + "gcc_gpu_gpll0_clk", + "gcc_gpu_gpll0_div_clk"; + status = "disabled"; + }; + lpass_smmu: iommu@5100000 { compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; reg = <0x05100000 0x40000>; @@ -805,6 +1184,120 @@ cell-index = <0>; }; + usb3: usb@a8f8800 { + compatible = "qcom,sdm660-dwc3", "qcom,dwc3"; + reg = <0x0a8f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_AGGRE2_USB3_AXI_CLK>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "bus", + "mock_utmi", "sleep"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + assigned-clock-rates = <19200000>, <120000000>, + <19200000>; + + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB_30_GDSC>; + qcom,select-utmi-as-pipe-clk; + + resets = <&gcc GCC_USB_30_BCR>; + + usb3_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0x0a800000 0xc8d0>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + + /* + * SDM630 technically supports USB3 but I + * haven't seen any devices making use of it. + */ + maximum-speed = "high-speed"; + phys = <&qusb2phy>; + phy-names = "usb2-phy"; + snps,hird-threshold = /bits/ 8 <0>; + }; + }; + + qusb2phy: phy@c012000 { + compatible = "qcom,sdm660-qusb2-phy"; + reg = <0x0c012000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX1_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + status = "disabled"; + }; + + sdhc_2: sdhci@c084000 { + compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0c084000 0x1000>; + reg-names = "hc"; + + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + bus-width = <4>; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + + interconnects = <&a2noc 3 &a2noc 10>, + <&gnoc 0 &cnoc 28>; + operating-points-v2 = <&sdhc2_opp_table>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_state_on>; + pinctrl-1 = <&sdc2_state_off>; + power-domains = <&rpmpd SDM660_VDDCX>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <200000 140000>; + opp-avg-kBps = <130718 133320>; + }; + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_svs>; + opp-peak-kBps = <250000 160000>; + opp-avg-kBps = <196078 150000>; + }; + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmpd_opp_nom>; + opp-peak-kBps = <4096000 4096000>; + opp-avg-kBps = <1338562 1338562>; + }; + }; + }; + sdhc_1: sdhci@c0c4000 { compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5"; reg = <0x0c0c4000 0x1000>, @@ -822,14 +1315,264 @@ <&gcc GCC_SDCC1_ICE_CORE_CLK>; clock-names = "core", "iface", "xo", "ice"; + interconnects = <&a2noc 2 &a2noc 10>, + <&gnoc 0 &cnoc 27>; + interconnect-names = "sdhc1-ddr", "cpu-sdhc1"; + operating-points-v2 = <&sdhc1_opp_table>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + power-domains = <&rpmpd SDM660_VDDCX>; bus-width = <8>; non-removable; status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <200000 140000>; + opp-avg-kBps = <130718 133320>; + }; + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_svs>; + opp-peak-kBps = <250000 160000>; + opp-avg-kBps = <196078 150000>; + }; + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_nom>; + opp-peak-kBps = <4096000 4096000>; + opp-avg-kBps = <1338562 1338562>; + }; + }; + }; + + mmcc: clock-controller@c8c0000 { + compatible = "qcom,mmcc-sdm630"; + reg = <0x0c8c0000 0x40000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "xo", + "sleep_clk", + "gpll0", + "gpll0_div", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte", + "dp_link_2x_clk_divsel_five", + "dp_vco_divided_clk_src_mux"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>, + <&gcc GCC_MMSS_GPLL0_CLK>, + <&gcc GCC_MMSS_GPLL0_DIV_CLK>, + <&dsi0_phy 1>, + <&dsi0_phy 0>, + <0>, + <0>, + <0>, + <0>; + }; + + dsi_opp_table: dsi-opp-table { + compatible = "operating-points-v2"; + + opp-131250000 { + opp-hz = /bits/ 64 <131250000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-210000000 { + opp-hz = /bits/ 64 <210000000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-262500000 { + opp-hz = /bits/ 64 <262500000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + + mdss: mdss@c900000 { + compatible = "qcom,mdss"; + reg = <0x0c900000 0x1000>, + <0x0c9b0000 0x1040>; + reg-names = "mdss_phys", "vbif_phys"; + + power-domains = <&mmcc MDSS_GDSC>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>, + <&mmcc MDSS_MDP_CLK>; + clock-names = "iface", + "bus", + "vsync", + "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + mdp: mdp@c901000 { + compatible = "qcom,mdp5"; + reg = <0x0c901000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + assigned-clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + assigned-clock-rates = <300000000>, + <19200000>; + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + interconnects = <&mnoc 2 &bimc 5>, + <&mnoc 3 &bimc 5>, + <&gnoc 0 &mnoc 17>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "rotator-mem"; + iommus = <&mmss_smmu 0>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SDM660_VDDCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + + mdp_opp_table: mdp-opp { + compatible = "operating-points-v2"; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + opp-peak-kBps = <320000 320000 76800>; + required-opps = <&rpmpd_opp_low_svs>; + }; + opp-275000000 { + opp-hz = /bits/ 64 <275000000>; + opp-peak-kBps = <6400000 6400000 160000>; + required-opps = <&rpmpd_opp_svs>; + }; + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <6400000 6400000 190000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + opp-330000000 { + opp-hz = /bits/ 64 <330000000>; + opp-peak-kBps = <6400000 6400000 240000>; + required-opps = <&rpmpd_opp_nom>; + }; + opp-412500000 { + opp-hz = /bits/ 64 <412500000>; + opp-peak-kBps = <6400000 6400000 320000>; + required-opps = <&rpmpd_opp_turbo>; + }; + }; + }; + + dsi0: dsi@c994000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0c994000 0x400>; + reg-names = "dsi_ctrl"; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd SDM660_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, + <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, + <&dsi0_phy 1>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_BYTE0_INTF_CLK>, + <&mmcc MNOC_AHB_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MISC_AHB_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "byte", + "byte_intf", + "mnoc", + "iface", + "bus", + "core_mmss", + "pixel", + "core"; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: dsi-phy@c994400 { + compatible = "qcom,dsi-phy-14nm-660"; + reg = <0x0c994400 0x100>, + <0x0c994500 0x300>, + <0x0c994800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; + clock-names = "iface", "ref"; + }; }; blsp1_dma: dma-controller@c144000 { @@ -883,6 +1626,8 @@ <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; clock-frequency = <400000>; + dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c1_default>; @@ -901,6 +1646,8 @@ <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; clock-frequency = <400000>; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c2_default>; @@ -919,6 +1666,8 @@ <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; clock-frequency = <400000>; + dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c3_default>; @@ -937,6 +1686,8 @@ <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; clock-frequency = <400000>; + dmas = <&blsp1_dma 10>, <&blsp1_dma 11>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_default>; @@ -969,10 +1720,8 @@ dmas = <&blsp2_dma 0>, <&blsp2_dma 1>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart1_tx_active &blsp2_uart1_rxcts_active - &blsp2_uart1_rfr_active>; - pinctrl-1 = <&blsp2_uart1_tx_sleep &blsp2_uart1_rxcts_sleep - &blsp2_uart1_rfr_sleep>; + pinctrl-0 = <&blsp2_uart1_default>; + pinctrl-1 = <&blsp2_uart1_sleep>; status = "disabled"; }; @@ -985,6 +1734,8 @@ <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; clock-frequency = <400000>; + dmas = <&blsp2_dma 4>, <&blsp2_dma 5>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c5_default>; @@ -1003,6 +1754,8 @@ <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; clock-frequency = <400000>; + dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c6_default>; @@ -1021,6 +1774,8 @@ <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; clock-frequency = <400000>; + dmas = <&blsp2_dma 8>, <&blsp2_dma 9>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c7_default>; @@ -1039,6 +1794,8 @@ <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; clock-frequency = <400000>; + dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c8_default>; @@ -1048,12 +1805,223 @@ status = "disabled"; }; + imem@146bf000 { + compatible = "simple-mfd"; + reg = <0x146bf000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0x146bf000 0x1000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + + camss: camss@ca00000 { + compatible = "qcom,sdm660-camss"; + reg = <0x0c824000 0x1000>, + <0x0ca00120 0x4>, + <0x0c825000 0x1000>, + <0x0ca00124 0x4>, + <0x0c826000 0x1000>, + <0x0ca00128 0x4>, + <0x0ca30000 0x100>, + <0x0ca30400 0x100>, + <0x0ca30800 0x100>, + <0x0ca30c00 0x100>, + <0x0ca31000 0x500>, + <0x0ca00020 0x10>, + <0x0ca10000 0x1000>, + <0x0ca14000 0x1000>; + reg-names = "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csiphy2", + "csiphy2_clk_mux", + "csid0", + "csid1", + "csid2", + "csid3", + "ispif", + "csi_clk_mux", + "vfe0", + "vfe1"; + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csiphy0", + "csiphy1", + "csiphy2", + "csid0", + "csid1", + "csid2", + "csid3", + "ispif", + "vfe0", + "vfe1"; + clocks = <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc THROTTLE_CAMSS_AXI_CLK>, + <&mmcc CAMSS_ISPIF_AHB_CLK>, + <&mmcc CAMSS_CSI0PHYTIMER_CLK>, + <&mmcc CAMSS_CSI1PHYTIMER_CLK>, + <&mmcc CAMSS_CSI2PHYTIMER_CLK>, + <&mmcc CAMSS_CSI0_AHB_CLK>, + <&mmcc CAMSS_CSI0_CLK>, + <&mmcc CAMSS_CPHY_CSID0_CLK>, + <&mmcc CAMSS_CSI0PIX_CLK>, + <&mmcc CAMSS_CSI0RDI_CLK>, + <&mmcc CAMSS_CSI1_AHB_CLK>, + <&mmcc CAMSS_CSI1_CLK>, + <&mmcc CAMSS_CPHY_CSID1_CLK>, + <&mmcc CAMSS_CSI1PIX_CLK>, + <&mmcc CAMSS_CSI1RDI_CLK>, + <&mmcc CAMSS_CSI2_AHB_CLK>, + <&mmcc CAMSS_CSI2_CLK>, + <&mmcc CAMSS_CPHY_CSID2_CLK>, + <&mmcc CAMSS_CSI2PIX_CLK>, + <&mmcc CAMSS_CSI2RDI_CLK>, + <&mmcc CAMSS_CSI3_AHB_CLK>, + <&mmcc CAMSS_CSI3_CLK>, + <&mmcc CAMSS_CPHY_CSID3_CLK>, + <&mmcc CAMSS_CSI3PIX_CLK>, + <&mmcc CAMSS_CSI3RDI_CLK>, + <&mmcc CAMSS_AHB_CLK>, + <&mmcc CAMSS_VFE0_CLK>, + <&mmcc CAMSS_CSI_VFE0_CLK>, + <&mmcc CAMSS_VFE0_AHB_CLK>, + <&mmcc CAMSS_VFE0_STREAM_CLK>, + <&mmcc CAMSS_VFE1_CLK>, + <&mmcc CAMSS_CSI_VFE1_CLK>, + <&mmcc CAMSS_VFE1_AHB_CLK>, + <&mmcc CAMSS_VFE1_STREAM_CLK>, + <&mmcc CAMSS_VFE_VBIF_AHB_CLK>, + <&mmcc CAMSS_VFE_VBIF_AXI_CLK>, + <&mmcc CSIPHY_AHB2CRIF_CLK>, + <&mmcc CAMSS_CPHY_CSID0_CLK>, + <&mmcc CAMSS_CPHY_CSID1_CLK>, + <&mmcc CAMSS_CPHY_CSID2_CLK>, + <&mmcc CAMSS_CPHY_CSID3_CLK>; + clock-names = "top_ahb", + "throttle_axi", + "ispif_ahb", + "csiphy0_timer", + "csiphy1_timer", + "csiphy2_timer", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "csi2_ahb", + "csi2", + "csi2_phy", + "csi2_pix", + "csi2_rdi", + "csi3_ahb", + "csi3", + "csi3_phy", + "csi3_pix", + "csi3_rdi", + "ahb", + "vfe0", + "csi_vfe0", + "vfe0_ahb", + "vfe0_stream", + "vfe1", + "csi_vfe1", + "vfe1_ahb", + "vfe1_stream", + "vfe_ahb", + "vfe_axi", + "csiphy_ahb2crif", + "cphy_csid0", + "cphy_csid1", + "cphy_csid2", + "cphy_csid3"; + interconnects = <&mnoc 5 &bimc 5>; + interconnect-names = "vfe-mem"; + iommus = <&mmss_smmu 0xc00>, + <&mmss_smmu 0xc01>, + <&mmss_smmu 0xc02>, + <&mmss_smmu 0xc03>; + power-domains = <&mmcc CAMSS_VFE0_GDSC>, + <&mmcc CAMSS_VFE1_GDSC>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci: cci@ca0c000 { + compatible = "qcom,msm8996-cci"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0ca0c000 0x1000>; + interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>; + + assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>, + <&mmcc CAMSS_CCI_CLK>; + assigned-clock-rates = <80800000>, <37500000>; + clocks = <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_CCI_AHB_CLK>, + <&mmcc CAMSS_CCI_CLK>, + <&mmcc CAMSS_AHB_CLK>; + clock-names = "camss_top_ahb", + "cci_ahb", + "cci", + "camss_ahb"; + + pinctrl-names = "default"; + pinctrl-0 = <&cci0_default &cci1_default>; + power-domains = <&mmcc CAMSS_TOP_GDSC>; + status = "disabled"; + + cci_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + mmss_smmu: iommu@cd00000 { compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; reg = <0x0cd00000 0x40000>; - #iommu-cells = <1>; + clocks = <&mmcc MNOC_AHB_CLK>, + <&mmcc BIMC_SMMU_AHB_CLK>, + <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>, + <&mmcc BIMC_SMMU_AXI_CLK>; + clock-names = "iface-mm", "iface-smmu", + "bus-mm", "bus-smmu"; #global-interrupts = <2>; + #iommu-cells = <1>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, @@ -1086,6 +2054,97 @@ status = "disabled"; }; + adsp_pil: remoteproc@15700000 { + compatible = "qcom,sdm660-adsp-pas"; + reg = <0x15700000 0x4040>; + + interrupts-extended = + <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + memory-region = <&adsp_region>; + power-domains = <&rpmpd SDM660_VDDCX>; + power-domain-names = "cx"; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + glink-edge { + interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>; + + label = "lpass"; + mboxes = <&apcs_glb 9>; + qcom,remote-pid = <2>; + #address-cells = <1>; + #size-cells = <0>; + + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,apr-domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + q6core { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + }; + + q6afe: apr-service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + }; + + q6asm: apr-service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&lpass_smmu 1>; + }; + }; + + q6adm: apr-service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + }; + }; + + gnoc: interconnect@17900000 { + compatible = "qcom,sdm660-gnoc"; + reg = <0x17900000 0xe000>; + #interconnect-cells = <1>; + /* + * This one apparently features no clocks, + * so let's not mess with the driver needlessly + */ + clock-names = "bus", "bus_a"; + clocks = <&xo_board>, <&xo_board>; + }; + apcs_glb: mailbox@17911000 { compatible = "qcom,sdm660-apcs-hmss-global"; reg = <0x17911000 0x1000>; @@ -1173,6 +2232,182 @@ #hwlock-cells = <1>; }; + sound: sound { + }; + + thermal-zones { + aoss-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + + trips { + aoss_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <125000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <125000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <1000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <1000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <1000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <1000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + /* + * According to what downstream DTS says, + * the entire power efficient cluster has + * only a single thermal sensor. + */ + + pwr-cluster-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + pwr_cluster_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <1000>; + type = "passive"; + }; + + pwr_cluster_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + gpu_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 1 0xf08>, diff --git a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts index 7c0830e6a48c..bba1c2bce213 100644 --- a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts +++ b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts @@ -5,16 +5,20 @@ /dts-v1/; -/* Mermaid uses sdm636, but it's different ever so slightly - * that we can ignore it for the time being. Sony also commonizes - * the Ganges platform as a whole in downstream kernels. - */ -#include "sdm630-sony-xperia-ganges.dtsi" +#include "sdm630-sony-xperia-ganges-kirin.dts" +#include "sdm636.dtsi" / { model = "Sony Xperia 10 Plus"; compatible = "sony,mermaid-row", "qcom,sdm636"; + /* SDM636 v1 */ qcom,msm-id = <345 0>; qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00 0x1001b 0x102001a 0x00 0x00>; }; + +&sdc2_state_on { + pinconf-clk { + drive-strength = <14>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm636.dtsi b/arch/arm64/boot/dts/qcom/sdm636.dtsi new file mode 100644 index 000000000000..ae15d81fa3f9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm636.dtsi @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com> + * Copyright (c) 2020, Konrad Dybcio <konradybcio@gmail.com> + * Copyright (c) 2020, Martin Botka <martin.botka1@gmail.com> + */ + +#include "sdm660.dtsi" + +/* + * According to the downstream DTS, + * 636 is basically a 660 except for + * different CPU frequencies, Adreno + * 509 instead of 512 and lack of + * turing IP. These differences will + * be addressed when the aforementioned + * peripherals will be enabled upstream. + */ + +&adreno_gpu { + compatible = "qcom,adreno-509.0", "qcom,adreno"; + /* Adreno 509 shares the frequency table with 512 */ +}; diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts index 76533e8b2092..3e677fb7cfea 100644 --- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts @@ -37,8 +37,6 @@ &blsp1_uart2 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart_console_active>; }; &tlmm { diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi index 4abbdd03d1e7..eccf6fde16b4 100644 --- a/arch/arm64/boot/dts/qcom/sdm660.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi @@ -2,371 +2,250 @@ /* * Copyright (c) 2018, Craig Tatlor. * Copyright (c) 2020, Alexey Minnekhanov <alexey.min@gmail.com> + * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com> + * Copyright (c) 2020, Konrad Dybcio <konradybcio@gmail.com> + * Copyright (c) 2020, Martin Botka <martin.botka1@gmail.com> */ -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/clock/qcom,gcc-sdm660.h> +#include "sdm630.dtsi" -/ { - interrupt-parent = <&intc>; +&adreno_gpu { + compatible = "qcom,adreno-512.0", "qcom,adreno"; + operating-points-v2 = <&gpu_sdm660_opp_table>; - #address-cells = <2>; - #size-cells = <2>; + gpu_sdm660_opp_table: opp-table { + compatible = "operating-points-v2"; - chosen { }; + /* + * 775MHz is only available on the highest speed bin + * Though it cannot be used for now due to interconnect + * framework not supporting multiple frequencies + * at the same opp-level - clocks { - xo_board: xo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; - clock-output-names = "xo_board"; + opp-750000000 { + opp-hz = /bits/ 64 <750000000>; + opp-level = <RPM_SMD_LEVEL_TURBO>; + opp-peak-kBps = <5412000>; + opp-supported-hw = <0xCHECKME>; }; - sleep_clk: sleep_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32764>; - clock-output-names = "sleep_clk"; - }; - }; + * These OPPs are correct, but we are lacking support for the + * GPU regulator. Hence, disable them for now to prevent the + * platform from hanging on high graphics loads. - cpus { - #address-cells = <2>; - #size-cells = <0>; - - CPU0: cpu@100 { - device_type = "cpu"; - compatible = "qcom,kryo260"; - reg = <0x0 0x100>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - next-level-cache = <&L2_1>; - L2_1: l2-cache { - compatible = "cache"; - cache-level = <2>; - }; - L1_I_100: l1-icache { - compatible = "cache"; - }; - L1_D_100: l1-dcache { - compatible = "cache"; - }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-level = <RPM_SMD_LEVEL_TURBO>; + opp-peak-kBps = <5184000>; + opp-supported-hw = <0xFF>; }; - CPU1: cpu@101 { - device_type = "cpu"; - compatible = "qcom,kryo260"; - reg = <0x0 0x101>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - next-level-cache = <&L2_1>; - L1_I_101: l1-icache { - compatible = "cache"; - }; - L1_D_101: l1-dcache { - compatible = "cache"; - }; + opp-647000000 { + opp-hz = /bits/ 64 <647000000>; + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + opp-peak-kBps = <4068000>; + opp-supported-hw = <0xFF>; }; - CPU2: cpu@102 { - device_type = "cpu"; - compatible = "qcom,kryo260"; - reg = <0x0 0x102>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - next-level-cache = <&L2_1>; - L1_I_102: l1-icache { - compatible = "cache"; - }; - L1_D_102: l1-dcache { - compatible = "cache"; - }; + opp-588000000 { + opp-hz = /bits/ 64 <588000000>; + opp-level = <RPM_SMD_LEVEL_NOM>; + opp-peak-kBps = <3072000>; + opp-supported-hw = <0xFF>; }; - CPU3: cpu@103 { - device_type = "cpu"; - compatible = "qcom,kryo260"; - reg = <0x0 0x103>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - next-level-cache = <&L2_1>; - L1_I_103: l1-icache { - compatible = "cache"; - }; - L1_D_103: l1-dcache { - compatible = "cache"; - }; + opp-465000000 { + opp-hz = /bits/ 64 <465000000>; + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + opp-peak-kBps = <2724000>; + opp-supported-hw = <0xFF>; }; - CPU4: cpu@0 { - device_type = "cpu"; - compatible = "qcom,kryo260"; - reg = <0x0 0x0>; - enable-method = "psci"; - capacity-dmips-mhz = <640>; - next-level-cache = <&L2_0>; - L2_0: l2-cache { - compatible = "cache"; - cache-level = <2>; - }; - L1_I_0: l1-icache { - compatible = "cache"; - }; - L1_D_0: l1-dcache { - compatible = "cache"; - }; + opp-370000000 { + opp-hz = /bits/ 64 <370000000>; + opp-level = <RPM_SMD_LEVEL_SVS>; + opp-peak-kBps = <2188000>; + opp-supported-hw = <0xFF>; }; + */ - CPU5: cpu@1 { - device_type = "cpu"; - compatible = "qcom,kryo260"; - reg = <0x0 0x1>; - enable-method = "psci"; - capacity-dmips-mhz = <640>; - next-level-cache = <&L2_0>; - L1_I_1: l1-icache { - compatible = "cache"; - }; - L1_D_1: l1-dcache { - compatible = "cache"; - }; + opp-266000000 { + opp-hz = /bits/ 64 <266000000>; + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + opp-peak-kBps = <1648000>; + opp-supported-hw = <0xFF>; }; - CPU6: cpu@2 { - device_type = "cpu"; - compatible = "qcom,kryo260"; - reg = <0x0 0x2>; - enable-method = "psci"; - capacity-dmips-mhz = <640>; - next-level-cache = <&L2_0>; - L1_I_2: l1-icache { - compatible = "cache"; - }; - L1_D_2: l1-dcache { - compatible = "cache"; - }; + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + opp-peak-kBps = <1200000>; + opp-supported-hw = <0xFF>; }; + }; +}; - CPU7: cpu@3 { - device_type = "cpu"; - compatible = "qcom,kryo260"; - reg = <0x0 0x3>; - enable-method = "psci"; - capacity-dmips-mhz = <640>; - next-level-cache = <&L2_0>; - L1_I_3: l1-icache { - compatible = "cache"; - }; - L1_D_3: l1-dcache { - compatible = "cache"; - }; - }; - - cpu-map { - cluster0 { - core0 { - cpu = <&CPU4>; - }; - - core1 { - cpu = <&CPU5>; - }; - - core2 { - cpu = <&CPU6>; - }; - - core3 { - cpu = <&CPU7>; - }; - }; - - cluster1 { - core0 { - cpu = <&CPU0>; - }; +&CPU0 { + compatible = "qcom,kryo260"; + capacity-dmips-mhz = <1024>; + /delete-property/ operating-points-v2; +}; - core1 { - cpu = <&CPU1>; - }; +&CPU1 { + compatible = "qcom,kryo260"; + capacity-dmips-mhz = <1024>; + /delete-property/ operating-points-v2; +}; - core2 { - cpu = <&CPU2>; - }; +&CPU2 { + compatible = "qcom,kryo260"; + capacity-dmips-mhz = <1024>; + /delete-property/ operating-points-v2; +}; - core3 { - cpu = <&CPU3>; - }; - }; - }; - }; +&CPU3 { + compatible = "qcom,kryo260"; + capacity-dmips-mhz = <1024>; + /delete-property/ operating-points-v2; +}; - firmware { - scm { - compatible = "qcom,scm"; - }; - }; +&CPU4 { + compatible = "qcom,kryo260"; + capacity-dmips-mhz = <640>; + /delete-property/ operating-points-v2; +}; - memory { - device_type = "memory"; - /* We expect the bootloader to fill in the reg */ - reg = <0 0 0 0>; - }; +&CPU5 { + compatible = "qcom,kryo260"; + capacity-dmips-mhz = <640>; + /delete-property/ operating-points-v2; +}; - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; +&CPU6 { + compatible = "qcom,kryo260"; + capacity-dmips-mhz = <640>; + /delete-property/ operating-points-v2; +}; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; - }; +&CPU7 { + compatible = "qcom,kryo260"; + capacity-dmips-mhz = <640>; + /delete-property/ operating-points-v2; +}; - soc: soc { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0xffffffff>; - compatible = "simple-bus"; - - gcc: clock-controller@100000 { - compatible = "qcom,gcc-sdm660"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0x00100000 0x94000>; - }; +&gcc { + compatible = "qcom,gcc-sdm660"; +}; - tlmm: pinctrl@3100000 { - compatible = "qcom,sdm660-pinctrl"; - reg = <0x03100000 0x400000>, - <0x03500000 0x400000>, - <0x03900000 0x400000>; - reg-names = "south", "center", "north"; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - gpio-ranges = <&tlmm 0 0 114>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - - uart_console_active: uart_console_active { - pinmux { - pins = "gpio4", "gpio5"; - function = "blsp_uart2"; - }; +&gpucc { + compatible = "qcom,gpucc-sdm660"; +}; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-disable; - }; +&mdp { + ports { + port@1 { + reg = <1>; + mdp5_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; }; }; + }; +}; - spmi_bus: spmi@800f000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0x0800f000 0x1000>, - <0x08400000 0x1000000>, - <0x09400000 0x1000000>, - <0x0a400000 0x220000>, - <0x0800a000 0x3000>; - reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; - interrupt-names = "periph_irq"; - interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; +&mdss { + dsi1: dsi@c996000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0c996000 0x400>; + reg-names = "dsi_ctrl"; + + /* DSI1 shares the OPP table with DSI0 */ + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd SDM660_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + + assigned-clocks = <&mmcc BYTE1_CLK_SRC>, + <&mmcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, + <&dsi1_phy 1>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE1_CLK>, + <&mmcc MDSS_BYTE1_INTF_CLK>, + <&mmcc MNOC_AHB_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MISC_AHB_CLK>, + <&mmcc MDSS_PCLK1_CLK>, + <&mmcc MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "byte", + "byte_intf", + "mnoc", + "iface", + "bus", + "core_mmss", + "pixel", + "core"; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + ports { + #address-cells = <1>; #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; - cell-index = <0>; - }; - blsp1_uart2: serial@c170000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x0c170000 0x1000>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - - timer@17920000 { - #address-cells = <1>; - #size-cells = <1>; - ranges; - compatible = "arm,armv7-timer-mem"; - reg = <0x17920000 0x1000>; - - frame@17921000 { - frame-number = <0>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17921000 0x1000>, - <0x17922000 0x1000>; + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&mdp5_intf2_out>; + }; }; - frame@17923000 { - frame-number = <1>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17923000 0x1000>; - status = "disabled"; + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; }; + }; + }; - frame@17924000 { - frame-number = <2>; - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17924000 0x1000>; - status = "disabled"; - }; + dsi1_phy: dsi-phy@c996400 { + compatible = "qcom,dsi-phy-14nm-660"; + reg = <0x0c996400 0x100>, + <0x0c996500 0x300>, + <0x0c996800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; - frame@17925000 { - frame-number = <3>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17925000 0x1000>; - status = "disabled"; - }; + #clock-cells = <1>; + #phy-cells = <0>; - frame@17926000 { - frame-number = <4>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17926000 0x1000>; - status = "disabled"; - }; + clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + }; +}; - frame@17927000 { - frame-number = <5>; - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17927000 0x1000>; - status = "disabled"; - }; +&mmcc { + compatible = "qcom,mmcc-sdm660"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>, + <&gcc GCC_MMSS_GPLL0_CLK>, + <&gcc GCC_MMSS_GPLL0_DIV_CLK>, + <&dsi0_phy 1>, + <&dsi0_phy 0>, + <&dsi1_phy 1>, + <&dsi1_phy 0>, + <0>, + <0>; +}; - frame@17928000 { - frame-number = <6>; - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17928000 0x1000>; - status = "disabled"; - }; - }; +&tlmm { + compatible = "qcom,sdm660-pinctrl"; +}; - intc: interrupt-controller@17a00000 { - compatible = "arm,gic-v3"; - reg = <0x17a00000 0x10000>, - <0x17b00000 0x100000>; - #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - interrupt-controller; - #redistributor-regions = <1>; - redistributor-stride = <0x0 0x20000>; - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - }; - }; +&tsens { + #qcom,sensors = <14>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 91ede9296aff..52dd7a858231 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -413,6 +413,9 @@ qcom,dual-dsi-mode; + /* DSI1 is slave, so use DSI0 clocks */ + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + ports { port@1 { endpoint { diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 4d052e39b348..d4355522374a 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -19,9 +19,14 @@ / { aliases { + serial0 = &uart9; hsuart0 = &uart6; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + gpio-keys { compatible = "gpio-keys"; label = "Volume keys"; @@ -69,7 +74,7 @@ }; rmtfs_upper_guard: memory@f5d01000 { no-map; - reg = <0 0xf5d01000 0 0x2000>; + reg = <0 0xf5d01000 0 0x1000>; }; /* @@ -78,7 +83,7 @@ */ removed_region: memory@88f00000 { no-map; - reg = <0 0x88f00000 0 0x200000>; + reg = <0 0x88f00000 0 0x1c00000>; }; ramoops: ramoops@ac300000 { @@ -403,6 +408,7 @@ status = "okay"; memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm845/oneplus6/ipa_fws.mbn"; }; &mdss { @@ -526,6 +532,11 @@ }; }; +&uart9 { + label = "LS-UART1"; + status = "okay"; +}; + &ufs_mem_hc { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 1796ae8372be..6d7172e6f4c3 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -128,28 +128,23 @@ no-map; }; - ipa_fw_mem: memory@8c400000 { - reg = <0 0x8c400000 0 0x10000>; + wlan_msa_mem: memory@8c400000 { + reg = <0 0x8c400000 0 0x100000>; no-map; }; - ipa_gsi_mem: memory@8c410000 { - reg = <0 0x8c410000 0 0x5000>; + gpu_mem: memory@8c515000 { + reg = <0 0x8c515000 0 0x2000>; no-map; }; - gpu_mem: memory@8c415000 { - reg = <0 0x8c415000 0 0x2000>; + ipa_fw_mem: memory@8c517000 { + reg = <0 0x8c517000 0 0x5a000>; no-map; }; - adsp_mem: memory@8c500000 { - reg = <0 0x8c500000 0 0x1a00000>; - no-map; - }; - - wlan_msa_mem: memory@8df00000 { - reg = <0 0x8df00000 0 0x100000>; + adsp_mem: memory@8c600000 { + reg = <0 0x8c600000 0 0x1a00000>; no-map; }; @@ -3781,7 +3776,7 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; interconnect-names = "usb-ddr", "apps-usb"; - usb_1_dwc3: usb@a600000 { + usb_1_dwc3: dwc3@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; @@ -3829,7 +3824,7 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; interconnect-names = "usb-ddr", "apps-usb"; - usb_2_dwc3: usb@a800000 { + usb_2_dwc3: dwc3@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>; interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; @@ -4148,9 +4143,8 @@ power-domains = <&dispcc MDSS_GDSC>; clocks = <&gcc GCC_DISP_AHB_CLK>, - <&gcc GCC_DISP_AXI_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "bus", "core"; + clock-names = "iface", "core"; assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; assigned-clock-rates = <300000000>; @@ -4178,11 +4172,12 @@ <0 0x0aeb0000 0 0x2008>; reg-names = "mdp", "vbif"; - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, <&dispcc DISP_CC_MDSS_AXI_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>, <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "iface", "bus", "core", "vsync"; + clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, <&dispcc DISP_CC_MDSS_VSYNC_CLK>; @@ -4260,6 +4255,9 @@ "core", "iface", "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SDM845_CX>; @@ -4326,6 +4324,9 @@ "core", "iface", "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SDM845_CX>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index c2a709a384e9..385e5029437d 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -415,6 +415,11 @@ }; }; +&ipa { + status = "okay"; + memory-region = <&ipa_fw_mem>; +}; + &mdss { status = "okay"; }; @@ -700,7 +705,7 @@ left_spkr: wsa8810-left{ compatible = "sdw10217211000"; reg = <0 3>; - powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrLeft"; #sound-dai-cells = <0>; @@ -708,7 +713,7 @@ right_spkr: wsa8810-right{ compatible = "sdw10217211000"; - powerdown-gpios = <&wcdgpio 3 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; reg = <0 4>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrRight"; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts new file mode 100644 index 000000000000..58b6b2742d3f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org> + */ + +/dts-v1/; + +#include "sm6125.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/gpio-keys.h> + +/ { + /* required for bootloader to select correct board */ + qcom,msm-id = <394 0x10000>; /* sm6125 v1 */ + qcom,board-id = <34 0>; + + model = "Sony Xperia 10 II"; + compatible = "sony,pdx201", "qcom,sm6125"; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@5c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x5c000000 0 (2520 * 1080 * 4)>; + width = <1080>; + height = <2520>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + status = "okay"; + compatible = "gpio-keys"; + input-name = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + vol-dn { + label = "Volume Down"; + gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + gpio-key,wakeup; + debounce-interval = <15>; + }; + }; + + reserved_memory { + #address-cells = <2>; + #size-cells = <2>; + debug_mem: memory@ffb00000 { + reg = <0x0 0xffb00000 0x0 0xc0000>; + no-map; + }; + + last_log_mem: memory@ffbc0000 { + reg = <0x0 0xffbc0000 0x0 0x80000>; + no-map; + }; + + pstore_mem: ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc40000 0x0 0xc0000>; + record-size = <0x1000>; + console-size = <0x40000>; + msg-size = <0x20000 0x20000>; + }; + + cmdline_mem: memory@ffd00000 { + reg = <0x0 0xffd40000 0x0 0x1000>; + no-map; + }; + }; +}; + +&hsusb_phy1 { + status = "okay"; +}; + +&sdc2_state_off { + sd-cd { + pins = "gpio98"; + bias-disable; + drive-strength = <2>; + }; +}; + +&sdhc_1 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <22 2>, <28 6>; + + sdc2_state_on: sdc2-on { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd { + pins = "gpio98"; + bias-pull-up; + drive-strength = <2>; + }; + }; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + extcon = <&extcon_usb>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi new file mode 100644 index 000000000000..2b37ce6a9f9c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -0,0 +1,566 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org> + */ + +#include <dt-bindings/clock/qcom,gcc-sm6125.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + clock-output-names = "sleep_clk"; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x1>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x2>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x3>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1638>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x101>; + enable-method = "psci"; + capacity-dmips-mhz = <1638>; + next-level-cache = <&L2_1>; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x102>; + enable-method = "psci"; + capacity-dmips-mhz = <1638>; + next-level-cache = <&L2_1>; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x103>; + enable-method = "psci"; + capacity-dmips-mhz = <1638>; + next-level-cache = <&L2_1>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm6125", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@40000000 { + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + device_type = "memory"; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@45700000 { + reg = <0x0 0x45700000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: memory@45e00000 { + reg = <0x0 0x45e00000 0x0 0x140000>; + no-map; + }; + + sec_apps_mem: memory@45fff000 { + reg = <0x0 0x45fff000 0x0 0x1000>; + no-map; + }; + + smem_mem: memory@46000000 { + reg = <0x0 0x46000000 0x0 0x200000>; + no-map; + }; + + reserved_mem1: memory@46200000 { + reg = <0x0 0x46200000 0x0 0x2d00000>; + no-map; + }; + + camera_mem: memory@4ab00000 { + reg = <0x0 0x4ab00000 0x0 0x500000>; + no-map; + }; + + modem_mem: memory@4b000000 { + reg = <0x0 0x4b000000 0x0 0x7e00000>; + no-map; + }; + + venus_mem: memory@52e00000 { + reg = <0x0 0x52e00000 0x0 0x500000>; + no-map; + }; + + wlan_msa_mem: memory@53300000 { + reg = <0x0 0x53300000 0x0 0x200000>; + no-map; + }; + + cdsp_mem: memory@53500000 { + reg = <0x0 0x53500000 0x0 0x1e00000>; + no-map; + }; + + adsp_pil_mem: memory@55300000 { + reg = <0x0 0x55300000 0x0 0x1e00000>; + no-map; + }; + + ipa_fw_mem: memory@57100000 { + reg = <0x0 0x57100000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@57110000 { + reg = <0x0 0x57110000 0x0 0x5000>; + no-map; + }; + + gpu_mem: memory@57115000 { + reg = <0x0 0x57115000 0x0 0x2000>; + no-map; + }; + + cont_splash_mem: memory@5c000000 { + reg = <0x0 0x5c000000 0x0 0x00f00000>; + no-map; + }; + + dfps_data_mem: memory@5cf00000 { + reg = <0x0 0x5cf00000 0x0 0x0100000>; + no-map; + }; + + cdsp_sec_mem: memory@5f800000 { + reg = <0x0 0x5f800000 0x0 0x1e00000>; + no-map; + }; + + qseecom_mem: memory@5e400000 { + reg = <0x0 0x5e400000 0x0 0x1400000>; + no-map; + }; + + sdsp_mem: memory@f3000000 { + reg = <0x0 0xf3000000 0x0 0x400000>; + no-map; + }; + + adsp_mem: memory@f3400000 { + reg = <0x0 0xf3400000 0x0 0x800000>; + no-map; + }; + + qseecom_ta_mem: memory@13fc00000 { + reg = <0x1 0x3fc00000 0x0 0x400000>; + no-map; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-sm6125"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc"; + #clock-cells = <1>; + }; + }; + }; + + smem: smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x00 0xffffffff>; + compatible = "simple-bus"; + + tcsr_mutex: hwlock@340000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x00340000 0x20000>; + #hwlock-cells = <1>; + }; + + tlmm: pinctrl@500000 { + compatible = "qcom,sm6125-tlmm"; + reg = <0x00500000 0x400000>, + <0x00900000 0x400000>, + <0x00d00000 0x400000>; + reg-names = "west", "south", "east"; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 134>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + sdc2_state_off: sdc2-off { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; + + gcc: clock-controller@1400000 { + compatible = "qcom,gcc-sm6125"; + reg = <0x01400000 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", "sleep_clk"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; + }; + + hsusb_phy1: phy@1613000 { + compatible = "qcom,msm8996-qusb2-phy"; + reg = <0x01613000 0x180>; + #phy-cells = <0>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_AHB2PHY_USB_CLK>; + clock-names = "ref", "cfg_ahb"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + status = "disabled"; + }; + + rpm_msg_ram: memory@45f0000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x045f0000 0x7000>; + }; + + sdhc_1: sdhci@4744000 { + compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x04744000 0x1000>, <0x04745000 0x1000>; + reg-names = "hc", "core"; + + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + sdhc_2: sdhci@4784000 { + compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x04784000 0x1000>; + reg-names = "hc"; + + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + + pinctrl-0 = <&sdc2_state_on>; + pinctrl-1 = <&sdc2_state_off>; + pinctrl-names = "default", "sleep"; + + bus-width = <4>; + status = "disabled"; + }; + + usb3: usb@4ef8800 { + compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; + reg = <0x04ef8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <66666667>; + + power-domains = <&gcc USB30_PRIM_GDSC>; + qcom,select-utmi-as-pipe-clk; + status = "disabled"; + + usb3_dwc3: usb@4e00000 { + compatible = "snps,dwc3"; + reg = <0x04e00000 0xcd00>; + interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + phys = <&hsusb_phy1>; + phy-names = "usb2-phy"; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + maximum-speed = "high-speed"; + dr_mode = "peripheral"; + }; + }; + + spmi_bus: spmi@1c40000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x01c40000 0x1100>, + <0x01e00000 0x2000000>, + <0x03e00000 0x100000>, + <0x03f00000 0xa0000>, + <0x01c0a000 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + apcs_glb: mailbox@f111000 { + compatible = "qcom,sm6125-apcs-hmss-global"; + reg = <0x0f111000 0x1000>; + + #mbox-cells = <1>; + }; + + timer@f120000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0x0f120000 0x1000>; + clock-frequency = <19200000>; + + frame@0f121000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0f121000 0x1000>, + <0x0f122000 0x1000>; + }; + + frame@0f123000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0f123000 0x1000>; + status = "disabled"; + }; + + frame@0f124000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0f124000 0x1000>; + status = "disabled"; + }; + + frame@f125000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0f125000 0x1000>; + status = "disabled"; + }; + + frame@f126000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0f126000 0x1000>; + status = "disabled"; + }; + + frame@f127000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0f127000 0x1000>; + status = "disabled"; + }; + + frame@f128000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0f128000 0x1000>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@f200000 { + compatible = "arm,gic-v3"; + reg = <0x0f200000 0x20000>, + <0x0f300000 0x100000>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 0xf08 + GIC_PPI 2 0xf08 + GIC_PPI 3 0xf08 + GIC_PPI 0 0xf08>; + clock-frequency = <19200000>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts index 53edf7541169..b484371a6044 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts @@ -15,7 +15,7 @@ / { model = "Qualcomm Technologies, Inc. SM8150 MTP"; - compatible = "qcom,sm8150-mtp"; + compatible = "qcom,sm8150-mtp", "qcom,sm8150"; aliases { serial0 = &uart2; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 612dda0fef43..ef0232c2cf45 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/clock/qcom,gcc-sm8150.h> #include <dt-bindings/clock/qcom,gpucc-sm8150.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> +#include <dt-bindings/interconnect/qcom,sm8150.h> #include <dt-bindings/thermal/thermal.h> / { @@ -52,6 +53,9 @@ dynamic-power-coefficient = <232>; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -73,6 +77,9 @@ dynamic-power-coefficient = <232>; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; power-domains = <&CPU_PD1>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -92,6 +99,9 @@ dynamic-power-coefficient = <232>; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; power-domains = <&CPU_PD2>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -110,6 +120,9 @@ dynamic-power-coefficient = <232>; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; power-domains = <&CPU_PD3>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -128,6 +141,9 @@ dynamic-power-coefficient = <369>; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; power-domains = <&CPU_PD4>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -146,6 +162,9 @@ dynamic-power-coefficient = <369>; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; power-domains = <&CPU_PD5>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -164,6 +183,9 @@ dynamic-power-coefficient = <369>; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; power-domains = <&CPU_PD6>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -182,6 +204,9 @@ dynamic-power-coefficient = <421>; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; + operating-points-v2 = <&cpu7_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; power-domains = <&CPU_PD7>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -264,6 +289,296 @@ }; }; + cpu0_opp_table: cpu0_opp_table { + compatible = "operating-points-v2"; + opp-shared; + + cpu0_opp1: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <800000 9600000>; + }; + + cpu0_opp2: opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + opp-peak-kBps = <800000 9600000>; + }; + + cpu0_opp3: opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + opp-peak-kBps = <800000 12902400>; + }; + + cpu0_opp4: opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <800000 12902400>; + }; + + cpu0_opp5: opp-672000000 { + opp-hz = /bits/ 64 <672000000>; + opp-peak-kBps = <800000 15974400>; + }; + + cpu0_opp6: opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + opp-peak-kBps = <1804000 19660800>; + }; + + cpu0_opp7: opp-844800000 { + opp-hz = /bits/ 64 <844800000>; + opp-peak-kBps = <1804000 19660800>; + }; + + cpu0_opp8: opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <1804000 22732800>; + }; + + cpu0_opp9: opp-1036800000 { + opp-hz = /bits/ 64 <1036800000>; + opp-peak-kBps = <1804000 22732800>; + }; + + cpu0_opp10: opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + opp-peak-kBps = <2188000 25804800>; + }; + + cpu0_opp11: opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-peak-kBps = <2188000 31948800>; + }; + + cpu0_opp12: opp-1305600000 { + opp-hz = /bits/ 64 <1305600000>; + opp-peak-kBps = <3072000 31948800>; + }; + + cpu0_opp13: opp-1382400000 { + opp-hz = /bits/ 64 <1382400000>; + opp-peak-kBps = <3072000 31948800>; + }; + + cpu0_opp14: opp-1478400000 { + opp-hz = /bits/ 64 <1478400000>; + opp-peak-kBps = <3072000 31948800>; + }; + + cpu0_opp15: opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + opp-peak-kBps = <3072000 40550400>; + }; + + cpu0_opp16: opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + opp-peak-kBps = <3072000 40550400>; + }; + + cpu0_opp17: opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <3072000 43008000>; + }; + + cpu0_opp18: opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + opp-peak-kBps = <3072000 43008000>; + }; + }; + + cpu4_opp_table: cpu4_opp_table { + compatible = "operating-points-v2"; + opp-shared; + + cpu4_opp1: opp-710400000 { + opp-hz = /bits/ 64 <710400000>; + opp-peak-kBps = <1804000 15974400>; + }; + + cpu4_opp2: opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <2188000 19660800>; + }; + + cpu4_opp3: opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <2188000 22732800>; + }; + + cpu4_opp4: opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <3072000 25804800>; + }; + + cpu4_opp5: opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + opp-peak-kBps = <3072000 31948800>; + }; + + cpu4_opp6: opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-peak-kBps = <4068000 31948800>; + }; + + cpu4_opp7: opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-peak-kBps = <4068000 31948800>; + }; + + cpu4_opp8: opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + opp-peak-kBps = <4068000 40550400>; + }; + + cpu4_opp9: opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <4068000 40550400>; + }; + + cpu4_opp10: opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <4068000 43008000>; + }; + + cpu4_opp11: opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <6220000 43008000>; + }; + + cpu4_opp12: opp-1920000000 { + opp-hz = /bits/ 64 <1920000000>; + opp-peak-kBps = <6220000 49152000>; + }; + + cpu4_opp13: opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-peak-kBps = <7216000 49152000>; + }; + + cpu4_opp14: opp-2131200000 { + opp-hz = /bits/ 64 <2131200000>; + opp-peak-kBps = <8368000 49152000>; + }; + + cpu4_opp15: opp-2227200000 { + opp-hz = /bits/ 64 <2227200000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu4_opp16: opp-2323200000 { + opp-hz = /bits/ 64 <2323200000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu4_opp17: opp-2419200000 { + opp-hz = /bits/ 64 <2419200000>; + opp-peak-kBps = <8368000 51609600>; + }; + }; + + cpu7_opp_table: cpu7_opp_table { + compatible = "operating-points-v2"; + opp-shared; + + cpu7_opp1: opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <2188000 19660800>; + }; + + cpu7_opp2: opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <2188000 22732800>; + }; + + cpu7_opp3: opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <3072000 25804800>; + }; + + cpu7_opp4: opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + opp-peak-kBps = <3072000 31948800>; + }; + + cpu7_opp5: opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-peak-kBps = <4068000 31948800>; + }; + + cpu7_opp6: opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-peak-kBps = <4068000 31948800>; + }; + + cpu7_opp7: opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + opp-peak-kBps = <4068000 40550400>; + }; + + cpu7_opp8: opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <4068000 40550400>; + }; + + cpu7_opp9: opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <4068000 43008000>; + }; + + cpu7_opp10: opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <6220000 43008000>; + }; + + cpu7_opp11: opp-1920000000 { + opp-hz = /bits/ 64 <1920000000>; + opp-peak-kBps = <6220000 49152000>; + }; + + cpu7_opp12: opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-peak-kBps = <7216000 49152000>; + }; + + cpu7_opp13: opp-2131200000 { + opp-hz = /bits/ 64 <2131200000>; + opp-peak-kBps = <8368000 49152000>; + }; + + cpu7_opp14: opp-2227200000 { + opp-hz = /bits/ 64 <2227200000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp15: opp-2323200000 { + opp-hz = /bits/ 64 <2323200000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp16: opp-2419200000 { + opp-hz = /bits/ 64 <2419200000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp17: opp-2534400000 { + opp-hz = /bits/ 64 <2534400000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp18: opp-2649600000 { + opp-hz = /bits/ 64 <2649600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp19: opp-2745600000 { + opp-hz = /bits/ 64 <2745600000>; + opp-peak-kBps = <8368000 51609600>; + }; + + cpu7_opp20: opp-2841600000 { + opp-hz = /bits/ 64 <2841600000>; + opp-peak-kBps = <8368000 51609600>; + }; + }; + firmware { scm: scm { compatible = "qcom,scm-sm8150", "qcom,scm"; @@ -626,6 +941,21 @@ status = "disabled"; }; + spi0: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x880000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c1: i2c@884000 { compatible = "qcom,geni-i2c"; reg = <0 0x00884000 0 0x4000>; @@ -639,6 +969,21 @@ status = "disabled"; }; + spi1: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x884000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c2: i2c@888000 { compatible = "qcom,geni-i2c"; reg = <0 0x00888000 0 0x4000>; @@ -652,6 +997,21 @@ status = "disabled"; }; + spi2: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x888000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c3: i2c@88c000 { compatible = "qcom,geni-i2c"; reg = <0 0x0088c000 0 0x4000>; @@ -665,6 +1025,21 @@ status = "disabled"; }; + spi3: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x88c000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c4: i2c@890000 { compatible = "qcom,geni-i2c"; reg = <0 0x00890000 0 0x4000>; @@ -678,6 +1053,21 @@ status = "disabled"; }; + spi4: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x890000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c5: i2c@894000 { compatible = "qcom,geni-i2c"; reg = <0 0x00894000 0 0x4000>; @@ -691,6 +1081,21 @@ status = "disabled"; }; + spi5: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x894000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c6: i2c@898000 { compatible = "qcom,geni-i2c"; reg = <0 0x00898000 0 0x4000>; @@ -704,6 +1109,21 @@ status = "disabled"; }; + spi6: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0 0x898000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c7: i2c@89c000 { compatible = "qcom,geni-i2c"; reg = <0 0x0089c000 0 0x4000>; @@ -717,6 +1137,20 @@ status = "disabled"; }; + spi7: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x89c000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi7_default>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; gpi_dma1: dma-controller@a00000 { @@ -767,6 +1201,21 @@ status = "disabled"; }; + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0xa80000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c9: i2c@a84000 { compatible = "qcom,geni-i2c"; reg = <0 0x00a84000 0 0x4000>; @@ -780,6 +1229,21 @@ status = "disabled"; }; + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0xa84000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c10: i2c@a88000 { compatible = "qcom,geni-i2c"; reg = <0 0x00a88000 0 0x4000>; @@ -793,6 +1257,21 @@ status = "disabled"; }; + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0xa88000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c11: i2c@a8c000 { compatible = "qcom,geni-i2c"; reg = <0 0x00a8c000 0 0x4000>; @@ -806,6 +1285,21 @@ status = "disabled"; }; + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0xa8c000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + uart2: serial@a90000 { compatible = "qcom,geni-debug-uart"; reg = <0x0 0x00a90000 0x0 0x4000>; @@ -828,6 +1322,21 @@ status = "disabled"; }; + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0xa90000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c16: i2c@94000 { compatible = "qcom,geni-i2c"; reg = <0 0x0094000 0 0x4000>; @@ -840,6 +1349,21 @@ #size-cells = <0>; status = "disabled"; }; + + spi16: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0xa94000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi16_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; gpi_dma2: dma-controller@c00000 { @@ -891,6 +1415,21 @@ status = "disabled"; }; + spi17: spi@c80000 { + compatible = "qcom,geni-spi"; + reg = <0 0xc80000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi17_default>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c18: i2c@c84000 { compatible = "qcom,geni-i2c"; reg = <0 0x00c84000 0 0x4000>; @@ -904,6 +1443,21 @@ status = "disabled"; }; + spi18: spi@c84000 { + compatible = "qcom,geni-spi"; + reg = <0 0xc84000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi18_default>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c19: i2c@c88000 { compatible = "qcom,geni-i2c"; reg = <0 0x00c88000 0 0x4000>; @@ -917,6 +1471,21 @@ status = "disabled"; }; + spi19: spi@c88000 { + compatible = "qcom,geni-spi"; + reg = <0 0xc88000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi19_default>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c13: i2c@c8c000 { compatible = "qcom,geni-i2c"; reg = <0 0x00c8c000 0 0x4000>; @@ -930,6 +1499,21 @@ status = "disabled"; }; + spi13: spi@c8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0xc8c000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_default>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c14: i2c@c90000 { compatible = "qcom,geni-i2c"; reg = <0 0x00c90000 0 0x4000>; @@ -943,6 +1527,21 @@ status = "disabled"; }; + spi14: spi@c90000 { + compatible = "qcom,geni-spi"; + reg = <0 0xc90000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_default>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c15: i2c@c94000 { compatible = "qcom,geni-i2c"; reg = <0 0x00c94000 0 0x4000>; @@ -955,6 +1554,21 @@ #size-cells = <0>; status = "disabled"; }; + + spi15: spi@c94000 { + compatible = "qcom,geni-spi"; + reg = <0 0xc94000 0 0x4000>; + reg-names = "se"; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_default>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; config_noc: interconnect@1500000 { @@ -1016,7 +1630,9 @@ ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8150-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; - reg = <0 0x01d84000 0 0x2500>; + reg = <0 0x01d84000 0 0x2500>, + <0 0x01d90000 0 0x8000>; + reg-names = "std", "ice"; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; phys = <&ufs_mem_phy_lanes>; phy-names = "ufsphy"; @@ -1035,7 +1651,8 @@ "ref_clk", "tx_lane0_sync_clk", "rx_lane0_sync_clk", - "rx_lane1_sync_clk"; + "rx_lane1_sync_clk", + "ice_core_clk"; clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, @@ -1044,7 +1661,8 @@ <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; freq-table-hz = <37500000 300000000>, <0 0>, @@ -1053,7 +1671,8 @@ <0 0>, <0 0>, <0 0>, - <0 0>; + <0 0>, + <0 300000000>; status = "disabled"; }; @@ -1296,6 +1915,13 @@ }; }; + qup_spi0_default: qup-spi0-default { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup0"; + drive-strength = <6>; + bias-disable; + }; + qup_i2c1_default: qup-i2c1-default { mux { pins = "gpio114", "gpio115"; @@ -1309,6 +1935,13 @@ }; }; + qup_spi1_default: qup-spi1-default { + pins = "gpio114", "gpio115", "gpio116", "gpio117"; + function = "qup1"; + drive-strength = <6>; + bias-disable; + }; + qup_i2c2_default: qup-i2c2-default { mux { pins = "gpio126", "gpio127"; @@ -1322,6 +1955,13 @@ }; }; + qup_spi2_default: qup-spi2-default { + pins = "gpio126", "gpio127", "gpio128", "gpio129"; + function = "qup2"; + drive-strength = <6>; + bias-disable; + }; + qup_i2c3_default: qup-i2c3-default { mux { pins = "gpio144", "gpio145"; @@ -1335,6 +1975,13 @@ }; }; + qup_spi3_default: qup-spi3-default { + pins = "gpio144", "gpio145", "gpio146", "gpio147"; + function = "qup3"; + drive-strength = <6>; + bias-disable; + }; + qup_i2c4_default: qup-i2c4-default { mux { pins = "gpio51", "gpio52"; @@ -1348,6 +1995,13 @@ }; }; + qup_spi4_default: qup-spi4-default { + pins = "gpio51", "gpio52", "gpio53", "gpio54"; + function = "qup4"; + drive-strength = <6>; + bias-disable; + }; + qup_i2c5_default: qup-i2c5-default { mux { pins = "gpio121", "gpio122"; @@ -1361,6 +2015,13 @@ }; }; + qup_spi5_default: qup-spi5-default { + pins = "gpio119", "gpio120", "gpio121", "gpio122"; + function = "qup5"; + drive-strength = <6>; + bias-disable; + }; + qup_i2c6_default: qup-i2c6-default { mux { pins = "gpio6", "gpio7"; @@ -1374,6 +2035,13 @@ }; }; + qup_spi6_default: qup-spi6_default { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "qup6"; + drive-strength = <6>; + bias-disable; + }; + qup_i2c7_default: qup-i2c7-default { mux { pins = "gpio98", "gpio99"; @@ -1387,6 +2055,13 @@ }; }; + qup_spi7_default: qup-spi7_default { + pins = "gpio98", "gpio99", "gpio100", "gpio101"; + function = "qup7"; + drive-strength = <6>; + bias-disable; + }; + qup_i2c8_default: qup-i2c8-default { mux { pins = "gpio88", "gpio89"; @@ -1400,6 +2075,13 @@ }; }; + qup_spi8_default: qup-spi8-default { + pins = "gpio88", "gpio89", "gpio90", "gpio91"; + function = "qup8"; + drive-strength = <6>; + bias-disable; + }; + qup_i2c9_default: qup-i2c9-default { mux { pins = "gpio39", "gpio40"; @@ -1413,6 +2095,13 @@ }; }; + qup_spi9_default: qup-spi9-default { + pins = "gpio39", "gpio40", "gpio41", "gpio42"; + function = "qup9"; + drive-strength = <6>; + bias-disable; + }; + qup_i2c10_default: qup-i2c10-default { mux { pins = "gpio9", "gpio10"; @@ -1426,6 +2115,13 @@ }; }; + qup_spi10_default: qup-spi10-default { + pins = "gpio9", "gpio10", "gpio11", "gpio12"; + function = "qup10"; + drive-strength = <6>; + bias-disable; + }; + qup_i2c11_default: qup-i2c11-default { mux { pins = "gpio94", "gpio95"; @@ -1439,6 +2135,13 @@ }; }; + qup_spi11_default: qup-spi11-default { + pins = "gpio92", "gpio93", "gpio94", "gpio95"; + function = "qup11"; + drive-strength = <6>; + bias-disable; + }; + qup_i2c12_default: qup-i2c12-default { mux { pins = "gpio83", "gpio84"; @@ -1452,6 +2155,13 @@ }; }; + qup_spi12_default: qup-spi12-default { + pins = "gpio83", "gpio84", "gpio85", "gpio86"; + function = "qup12"; + drive-strength = <6>; + bias-disable; + }; + qup_i2c13_default: qup-i2c13-default { mux { pins = "gpio43", "gpio44"; @@ -1465,6 +2175,13 @@ }; }; + qup_spi13_default: qup-spi13-default { + pins = "gpio43", "gpio44", "gpio45", "gpio46"; + function = "qup13"; + drive-strength = <6>; + bias-disable; + }; + qup_i2c14_default: qup-i2c14-default { mux { pins = "gpio47", "gpio48"; @@ -1478,6 +2195,13 @@ }; }; + qup_spi14_default: qup-spi14-default { + pins = "gpio47", "gpio48", "gpio49", "gpio50"; + function = "qup14"; + drive-strength = <6>; + bias-disable; + }; + qup_i2c15_default: qup-i2c15-default { mux { pins = "gpio27", "gpio28"; @@ -1491,6 +2215,13 @@ }; }; + qup_spi15_default: qup-spi15-default { + pins = "gpio27", "gpio28", "gpio29", "gpio30"; + function = "qup15"; + drive-strength = <6>; + bias-disable; + }; + qup_i2c16_default: qup-i2c16-default { mux { pins = "gpio86", "gpio85"; @@ -1504,6 +2235,13 @@ }; }; + qup_spi16_default: qup-spi16-default { + pins = "gpio83", "gpio84", "gpio85", "gpio86"; + function = "qup16"; + drive-strength = <6>; + bias-disable; + }; + qup_i2c17_default: qup-i2c17-default { mux { pins = "gpio55", "gpio56"; @@ -1517,6 +2255,13 @@ }; }; + qup_spi17_default: qup-spi17-default { + pins = "gpio55", "gpio56", "gpio57", "gpio58"; + function = "qup17"; + drive-strength = <6>; + bias-disable; + }; + qup_i2c18_default: qup-i2c18-default { mux { pins = "gpio23", "gpio24"; @@ -1530,6 +2275,13 @@ }; }; + qup_spi18_default: qup-spi18-default { + pins = "gpio23", "gpio24", "gpio25", "gpio26"; + function = "qup18"; + drive-strength = <6>; + bias-disable; + }; + qup_i2c19_default: qup-i2c19-default { mux { pins = "gpio57", "gpio58"; @@ -1542,6 +2294,13 @@ bias-disable; }; }; + + qup_spi19_default: qup-spi19-default { + pins = "gpio55", "gpio56", "gpio57", "gpio58"; + function = "qup19"; + drive-strength = <6>; + bias-disable; + }; }; remoteproc_mpss: remoteproc@4080000 { @@ -2266,20 +3025,6 @@ }; }; - dc_noc: interconnect@9160000 { - compatible = "qcom,sm8150-dc-noc"; - reg = <0 0x09160000 0 0x3200>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - gem_noc: interconnect@9680000 { - compatible = "qcom,sm8150-gem-noc"; - reg = <0 0x09680000 0 0x3e200>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - usb_2_qmpphy: phy@88eb000 { compatible = "qcom,sm8150-qmp-usb3-uni-phy"; reg = <0 0x088eb000 0 0x200>; @@ -2311,6 +3056,20 @@ }; }; + dc_noc: interconnect@9160000 { + compatible = "qcom,sm8150-dc-noc"; + reg = <0 0x09160000 0 0x3200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect@9680000 { + compatible = "qcom,sm8150-gem-noc"; + reg = <0 0x09680000 0 0x3e200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + usb_1: usb@a6f8800 { compatible = "qcom,sm8150-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; @@ -2344,7 +3103,7 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; - usb_1_dwc3: usb@a600000 { + usb_1_dwc3: dwc3@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; @@ -2389,7 +3148,7 @@ resets = <&gcc GCC_USB30_SEC_BCR>; - usb_2_dwc3: dwc3@a800000 { + usb_2_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>; interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 4798368b02ef..8c15d9fed08f 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -561,6 +561,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c14_default>; interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -572,10 +575,13 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -587,6 +593,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c15_default>; interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -598,10 +607,13 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -613,6 +625,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c16_default>; interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -624,10 +639,13 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -639,6 +657,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c17_default>; interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -650,10 +671,13 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -678,6 +702,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c18_default>; interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -689,10 +716,13 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -717,6 +747,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c19_default>; interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -728,10 +761,13 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; }; @@ -779,6 +815,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c0_default>; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -790,10 +829,13 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -805,6 +847,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c1_default>; interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -816,10 +861,13 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -831,6 +879,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c2_default>; interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -842,10 +893,13 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -870,6 +924,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c3_default>; interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -881,10 +938,13 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -896,6 +956,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c4_default>; interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -907,10 +970,13 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -922,6 +988,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c5_default>; interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -933,10 +1002,13 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -948,6 +1020,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c6_default>; interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -959,10 +1034,13 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -987,6 +1065,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c7_default>; interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -998,10 +1079,13 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; }; @@ -1046,6 +1130,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c8_default>; interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1057,10 +1144,13 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -1072,6 +1162,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c9_default>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1083,10 +1176,13 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -1098,6 +1194,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c10_default>; interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1109,10 +1208,13 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -1124,6 +1226,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c11_default>; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1135,10 +1240,13 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -1150,6 +1258,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c12_default>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1161,10 +1272,13 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -1189,6 +1303,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c13_default>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1200,10 +1317,13 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; }; @@ -2210,7 +2330,7 @@ <&gcc GCC_USB3_PHY_SEC_BCR>; reset-names = "phy", "common"; - usb_2_ssphy: lane@88eb200 { + usb_2_ssphy: lanes@88eb200 { reg = <0 0x088eb200 0 0x200>, <0 0x088eb400 0 0x200>, <0 0x088eb800 0 0x800>; @@ -2321,7 +2441,7 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; - usb_1_dwc3: dwc3@a600000 { + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; @@ -2372,7 +2492,7 @@ resets = <&gcc GCC_USB30_SEC_BCR>; - usb_2_dwc3: dwc3@a800000 { + usb_2_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>; interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; @@ -2470,10 +2590,9 @@ power-domains = <&dispcc MDSS_GDSC>; clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&gcc GCC_DISP_HF_AXI_CLK>, <&gcc GCC_DISP_SF_AXI_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "bus", "nrt_bus", "core"; + clock-names = "iface", "nrt_bus", "core"; assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; assigned-clock-rates = <460000000>; @@ -2578,6 +2697,9 @@ "iface", "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SM8250_MMCX>; @@ -2648,6 +2770,9 @@ "iface", "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SM8250_MMCX>; @@ -3955,7 +4080,7 @@ }; }; - epss_l3: interconnect@18591000 { + epss_l3: interconnect@18590000 { compatible = "qcom,sm8250-epss-l3"; reg = <0 0x18590000 0 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index f23a0cf3f7b7..56093e260ddf 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -219,7 +219,7 @@ firmware-name = "qcom/sm8350/modem.mbn"; }; -&qupv3_id_1 { +&qupv3_id_0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts index 93740444dd1e..bd95009c1875 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts @@ -286,7 +286,7 @@ firmware-name = "qcom/sm8350/modem.mbn"; }; -&qupv3_id_1 { +&qupv3_id_0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 0d16392bb976..e91cd8a5e535 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -456,7 +456,7 @@ #mbox-cells = <2>; }; - qupv3_id_1: geniqup@9c0000 { + qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x009c0000 0x0 0x6000>; clock-names = "m-ahb", "s-ahb"; @@ -481,6 +481,31 @@ }; }; + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_default_state>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sm8350-smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x100000>; @@ -666,12 +691,10 @@ clocks = <&rpmhcc RPMH_IPA_CLK>; clock-names = "core"; - interconnects = <&aggre2_noc MASTER_IPA &gem_noc SLAVE_LLCC>, - <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>, + interconnects = <&aggre2_noc MASTER_IPA &mc_virt SLAVE_EBI1>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>; - interconnect-names = "ipa_to_llcc", - "llcc_to_ebi1", - "appss_to_ipa"; + interconnect-names = "memory", + "config"; qcom,smem-states = <&ipa_smp2p_out 0>, <&ipa_smp2p_out 1>; @@ -801,6 +824,7 @@ interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&tlmm 0 0 204>; + wakeup-parent = <&pdc>; qup_uart3_default_state: qup-uart3-default-state { rx { @@ -812,6 +836,19 @@ function = "qup3"; }; }; + + qup_i2c13_default_state: qup-i2c13-default-state { + mux { + pins = "gpio0", "gpio1"; + function = "qup13"; + }; + + config { + pins = "gpio0", "gpio1"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; rng: rng@10d3000 { @@ -1273,7 +1310,7 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; - usb_1_dwc3: dwc3@a600000 { + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; @@ -1317,7 +1354,7 @@ resets = <&gcc GCC_USB30_SEC_BCR>; - usb_2_dwc3: dwc3@a800000 { + usb_2_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>; interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 68e30e26564b..15a53b513966 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -63,4 +63,12 @@ dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb +dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb +dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb + +dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb.dtb +dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb + dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi index e3c8b2fe143e..2692cc64bff6 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi @@ -197,6 +197,14 @@ compatible = "audio-graph-card"; label = "rcar-sound"; dais = <&rsnd_port0>, <&rsnd_port1>; + widgets = "Microphone", "Mic Jack", + "Line", "Line In Jack", + "Headphone", "Headphone Jack"; + mic-det-gpio = <&gpio0 2 GPIO_ACTIVE_LOW>; + routing = "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN3R", "MICBIAS", + "Mic Jack", "IN3R"; }; vccq_sdhi0: regulator-vccq-sdhi0 { diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi index 202c4fc88bd5..dde3a07bc417 100644 --- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi @@ -20,6 +20,7 @@ pinctrl-names = "default"; phy-handle = <&phy0>; tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <1800>; status = "okay"; phy0: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index 78c121a89f11..6f4fffacfca2 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -25,7 +25,7 @@ i2c4 = &i2c4; i2c5 = &i2c5; i2c6 = &i2c6; - i2c7 = &i2c_dvfs; + i2c7 = &iic_pmic; }; /* @@ -715,7 +715,7 @@ status = "disabled"; }; - i2c_dvfs: i2c@e60b0000 { + iic_pmic: i2c@e60b0000 { #address-cells = <1>; #size-cells = <0>; compatible = "renesas,iic-r8a774a1", diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index 28c612ce49c0..0f7bdfc90a0d 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -588,7 +588,7 @@ status = "disabled"; }; - i2c_dvfs: i2c@e60b0000 { + iic_pmic: i2c@e60b0000 { #address-cells = <1>; #size-cells = <0>; compatible = "renesas,iic-r8a774b1", diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index a5d4dce8476d..d597772c4c37 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -574,11 +574,13 @@ status = "disabled"; }; - i2c_dvfs: i2c@e60b0000 { + iic_pmic: i2c@e60b0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a774c0"; - reg = <0 0xe60b0000 0 0x15>; + compatible = "renesas,iic-r8a774c0", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 926>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts index 3e3b954a4a9d..c6ca61a8ed40 100644 --- a/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts @@ -47,76 +47,3 @@ clock-names = "du.0", "du.1", "du.2", "du.3", "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; }; - -&ehci2 { - status = "okay"; -}; - -&hdmi1 { - status = "okay"; - - ports { - port@1 { - reg = <1>; - rcar_dw_hdmi1_out: endpoint { - remote-endpoint = <&hdmi1_con>; - }; - }; - port@2 { - reg = <2>; - dw_hdmi1_snd_in: endpoint { - remote-endpoint = <&rsnd_endpoint2>; - }; - }; - }; -}; - -&hdmi1_con { - remote-endpoint = <&rcar_dw_hdmi1_out>; -}; - -&ohci2 { - status = "okay"; -}; - -&pfc { - usb2_pins: usb2 { - groups = "usb2"; - function = "usb2"; - }; -}; - -&rcar_sound { - ports { - /* rsnd_port0/1 are described in salvator-common.dtsi */ - rsnd_port2: port@2 { - reg = <2>; - rsnd_endpoint2: endpoint { - remote-endpoint = <&dw_hdmi1_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint2>; - frame-master = <&rsnd_endpoint2>; - - playback = <&ssi3>; - }; - }; - }; -}; - -&sata { - status = "okay"; -}; - -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2>; /* HDMI1 */ -}; - -&usb2_phy2 { - pinctrl-0 = <&usb2_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts index dcaaf12cec40..85f008ef63de 100644 --- a/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the H3ULCB Kingfisher board + * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3 ES1.x * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. diff --git a/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts index 38a6d6a108d4..5340579931e3 100644 --- a/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board + * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board with R-Car H3 ES1.x * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. diff --git a/arch/arm64/boot/dts/renesas/r8a77950.dtsi b/arch/arm64/boot/dts/renesas/r8a77950.dtsi index b643d3079db1..57eb88177e92 100644 --- a/arch/arm64/boot/dts/renesas/r8a77950.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77950.dtsi @@ -7,6 +7,8 @@ #include "r8a77951.dtsi" +#undef SOC_HAS_USB2_CH3 + &audma0 { iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>, <&ipmmu_mp1 2>, <&ipmmu_mp1 3>, diff --git a/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts index cf2165bdf625..d8e655ba81bd 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts @@ -47,76 +47,3 @@ clock-names = "du.0", "du.1", "du.2", "du.3", "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; }; - -&ehci2 { - status = "okay"; -}; - -&hdmi1 { - status = "okay"; - - ports { - port@1 { - reg = <1>; - rcar_dw_hdmi1_out: endpoint { - remote-endpoint = <&hdmi1_con>; - }; - }; - port@2 { - reg = <2>; - dw_hdmi1_snd_in: endpoint { - remote-endpoint = <&rsnd_endpoint2>; - }; - }; - }; -}; - -&hdmi1_con { - remote-endpoint = <&rcar_dw_hdmi1_out>; -}; - -&ohci2 { - status = "okay"; -}; - -&pfc { - usb2_pins: usb2 { - groups = "usb2"; - function = "usb2"; - }; -}; - -&rcar_sound { - ports { - /* rsnd_port0/1 are described in salvator-common.dtsi */ - rsnd_port2: port@2 { - reg = <2>; - rsnd_endpoint2: endpoint { - remote-endpoint = <&dw_hdmi1_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint2>; - frame-master = <&rsnd_endpoint2>; - - playback = <&ssi3>; - }; - }; - }; -}; - -&sata { - status = "okay"; -}; - -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2>; /* HDMI1 */ -}; - -&usb2_phy2 { - pinctrl-0 = <&usb2_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts index 37202fcdc35b..7f9fa842f01e 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts @@ -47,125 +47,3 @@ clock-names = "du.0", "du.1", "du.2", "du.3", "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; }; - -&ehci2 { - status = "okay"; -}; - -&ehci3 { - dr_mode = "otg"; - status = "okay"; -}; - -&hdmi1 { - status = "okay"; - - ports { - port@1 { - reg = <1>; - rcar_dw_hdmi1_out: endpoint { - remote-endpoint = <&hdmi1_con>; - }; - }; - port@2 { - reg = <2>; - dw_hdmi1_snd_in: endpoint { - remote-endpoint = <&rsnd_endpoint2>; - }; - }; - }; -}; - -&hdmi1_con { - remote-endpoint = <&rcar_dw_hdmi1_out>; -}; - -&hsusb3 { - dr_mode = "otg"; - status = "okay"; -}; - -&ohci2 { - status = "okay"; -}; - -&ohci3 { - dr_mode = "otg"; - status = "okay"; -}; - -&pca9654 { - pcie-sata-switch-hog { - gpio-hog; - gpios = <7 GPIO_ACTIVE_HIGH>; - output-low; /* enable SATA by default */ - line-name = "PCIE/SATA switch"; - }; -}; - -&pfc { - usb2_pins: usb2 { - groups = "usb2"; - function = "usb2"; - }; - - /* - * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins - * (when SW31 is the default setting on Salvator-XS). - * - If SW31 is the default setting, you cannot use USB2.0 ch3 on - * r8a77951 with Salvator-XS. - * Hence the SW31 setting must be changed like 2) below. - * 1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF: - * - Connect GP6_3[01] to ADV7842. - * 2) Changed setting of SW31: OFF-OFF-ON-ON-ON-ON: - * - Connect GP6_3[01] to BD082065 (USB2.0 ch3's host power). - * - Connect GP6_{04,21} to ADV7842. - */ - usb2_ch3_pins: usb2_ch3 { - groups = "usb2_ch3"; - function = "usb2_ch3"; - }; -}; - -&rcar_sound { - ports { - /* rsnd_port0/1 are described in salvator-common.dtsi */ - rsnd_port2: port@2 { - reg = <2>; - rsnd_endpoint2: endpoint { - remote-endpoint = <&dw_hdmi1_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint2>; - frame-master = <&rsnd_endpoint2>; - - playback = <&ssi3>; - }; - }; - }; -}; - -/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ -&sata { - status = "okay"; -}; - -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2>; /* HDMI1 */ -}; - -&usb2_phy2 { - pinctrl-0 = <&usb2_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&usb2_phy3 { - pinctrl-0 = <&usb2_ch3_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts index 11f943a67703..2e58a27aa276 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the H3ULCB Kingfisher board + * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3 ES2.0+ * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. diff --git a/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts index 8ad8f2a53977..06d4e948eb0f 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board + * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board with R-Car H3 ES2.0+ * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index 2e4c18b8eee4..1768a3e6bb8d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -11,6 +11,11 @@ #define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4 +#define SOC_HAS_HDMI1 +#define SOC_HAS_SATA +#define SOC_HAS_USB2_CH2 +#define SOC_HAS_USB2_CH3 + / { compatible = "renesas,r8a7795"; #address-cells = <2>; diff --git a/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts index 2151c37d77a6..02d61360692c 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the M3ULCB Kingfisher board + * Device Tree Source for the M3ULCB Kingfisher board with R-Car M3-W * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. diff --git a/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts index d041042a5619..4bfeb1df0488 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board + * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board with R-Car M3-W * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. diff --git a/arch/arm64/boot/dts/renesas/r8a77961-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77961-ulcb-kf.dts index 6ec958348eb0..d66eb27ee8c4 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961-ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a77961-ulcb-kf.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the M3ULCB Kingfisher board + * Device Tree Source for the M3ULCB Kingfisher board with R-Car M3-W+ * * Copyright (C) 2020 Eugeniu Rosca <rosca.eugeniu@gmail.com> */ diff --git a/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts index 294a055f117e..70cf926667a6 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board with R-Car - * M3-W+ + * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board with R-Car M3-W+ * * Copyright (C) 2020 Renesas Electronics Corp. */ diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index 91b501e0121e..041473aa5cd0 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -958,6 +958,14 @@ resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; }; dmac1: dma-controller@e7300000 { @@ -992,6 +1000,14 @@ resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; }; dmac2: dma-controller@e7310000 { @@ -1026,6 +1042,14 @@ resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; }; ipmmu_ds0: iommu@e6740000 { @@ -1160,6 +1184,7 @@ phy-mode = "rgmii"; rx-internal-delay-ps = <0>; tx-internal-delay-ps = <0>; + iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -2280,6 +2305,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -2292,6 +2318,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -2304,6 +2331,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; }; @@ -2316,6 +2344,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts index 729756c24c74..a1d3c8d531cf 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts @@ -30,17 +30,3 @@ clock-names = "du.0", "du.1", "du.3", "dclkin.0", "dclkin.1", "dclkin.3"; }; - -&pca9654 { - pcie-sata-switch-hog { - gpio-hog; - gpios = <7 GPIO_ACTIVE_HIGH>; - output-low; /* enable SATA by default */ - line-name = "PCIE/SATA switch"; - }; -}; - -/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ -&sata { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts index 12aa08fd6fd8..a601968c5727 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the M3NULCB Kingfisher board + * Device Tree Source for the M3NULCB Kingfisher board with R-Car M3-N * * Copyright (C) 2018 Renesas Electronics Corp. * Copyright (C) 2018 Cogent Embedded, Inc. diff --git a/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts index 964078b6cc49..71704b67a20e 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the M3NULCB (R-Car Starter Kit Pro) board + * Device Tree Source for the M3NULCB (R-Car Starter Kit Pro) board with R-Car M3-N * * Copyright (C) 2018 Renesas Electronics Corp. * Copyright (C) 2018 Cogent Embedded, Inc. diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index ad69da362a72..08df75606430 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -14,6 +14,8 @@ #define CPG_AUDIO_CLK_I R8A77965_CLK_S0D4 +#define SOC_HAS_SATA + / { compatible = "renesas,r8a77965"; #address-cells = <2>; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 5c84681703ed..d24da54f312b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the Eagle board + * Device Tree Source for the Eagle board with R-Car V3M * * Copyright (C) 2016-2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 7bde0a549c09..edf7f2a2f958 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the Condor board + * Device Tree Source for the Condor board with R-Car V3H * * Copyright (C) 2018 Renesas Electronics Corp. * Copyright (C) 2018 Cogent Embedded, Inc. diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 4715e4a4abe0..9c7146084ea1 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the ebisu board + * Device Tree Source for the Ebisu board with R-Car E3 * * Copyright (C) 2018 Renesas Electronics Corp. */ @@ -8,6 +8,7 @@ /dts-v1/; #include "r8a77990.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Renesas Ebisu board based on r8a77990"; @@ -80,6 +81,42 @@ }; }; + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW4-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW4-2"; + wakeup-source; + debounce-interval = <20>; + }; + key-3 { + gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW4-3"; + wakeup-source; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW4-4"; + wakeup-source; + debounce-interval = <20>; + }; + }; + lvds-decoder { compatible = "thine,thc63lvd1024"; vcc-supply = <®_3p3v>; @@ -473,6 +510,12 @@ rohm,ddr-backup-power = <0x1>; rohm,rstbmode-level; }; + + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; }; &lvds0 { @@ -540,6 +583,11 @@ function = "intc_ex"; }; + keys_pins: keys { + pins = "GP_5_10", "GP_5_11", "GP_5_12", "GP_5_13"; + bias-pull-up; + }; + pwm3_pins: pwm3 { groups = "pwm3_b"; function = "pwm3"; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 4d0304bc9745..0ea300a8147d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -290,8 +290,10 @@ i2c_dvfs: i2c@e60b0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a77990"; - reg = <0 0xe60b0000 0 0x15>; + compatible = "renesas,iic-r8a77990", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 926>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 6783c3ad0856..1ac15aa05b82 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the Draak board + * Device Tree Source for the Draak board with R-Car D3 * * Copyright (C) 2016-2018 Renesas Electronics Corp. * Copyright (C) 2017 Glider bvba @@ -9,6 +9,7 @@ /dts-v1/; #include "r8a77995.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Renesas Draak board based on r8a77995"; @@ -19,6 +20,16 @@ ethernet0 = &avb; }; + audio_clkout: audio-clkout { + /* + * This is same as <&rcar_sound 0> + * but needed to avoid cs2000/rcar_sound probe dead-lock + */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12288000>; + }; + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 50000>; @@ -67,6 +78,42 @@ }; }; + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW56-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW56-2"; + wakeup-source; + debounce-interval = <20>; + }; + key-3 { + gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW56-3"; + wakeup-source; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW56-4"; + wakeup-source; + debounce-interval = <20>; + }; + }; + lvds-decoder { compatible = "thine,thc63lvd1024"; vcc-supply = <®_3p3v>; @@ -124,6 +171,14 @@ regulator-always-on; }; + sound_card: sound { + compatible = "audio-graph-card"; + + dais = <&rsnd_port0 /* ak4613 */ + /* HDMI is not yet supported */ + >; + }; + vga { compatible = "vga-connector"; @@ -161,6 +216,25 @@ #clock-cells = <0>; clock-frequency = <74250000>; }; + + x19_clk: x19 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +}; + +&audio_clk_b { + /* + * X11 is connected to VI4_FIELD/SCIF_CLK/AUDIO_CLKB, + * and R-Car Sound uses AUDIO_CLKB. + * Note is that schematic indicates VI4_FIELD conection only + * not AUDIO_CLKB at SoC page. + * And this VI4_FIELD/SCIF_CLK/AUDIO_CLKB is connected to SW60. + * SW60 should be 1-2. + */ + + clock-frequency = <22579200>; }; &avb { @@ -236,6 +310,28 @@ pinctrl-names = "default"; status = "okay"; + ak4613: codec@10 { + compatible = "asahi-kasei,ak4613"; + #sound-dai-cells = <0>; + reg = <0x10>; + clocks = <&rcar_sound 0>; /* audio_clkout */ + + asahi-kasei,in1-single-end; + asahi-kasei,in2-single-end; + asahi-kasei,out1-single-end; + asahi-kasei,out2-single-end; + asahi-kasei,out3-single-end; + asahi-kasei,out4-single-end; + asahi-kasei,out5-single-end; + asahi-kasei,out6-single-end; + + port { + ak4613_endpoint: endpoint { + remote-endpoint = <&rsnd_for_ak4613>; + }; + }; + }; + composite-in@20 { compatible = "adi,adv7180cp"; reg = <0x20>; @@ -277,10 +373,6 @@ interrupt-parent = <&gpio1>; interrupts = <28 IRQ_TYPE_LEVEL_LOW>; - /* Depends on LVDS */ - max-clock = <135000000>; - min-vrefresh = <50>; - adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; @@ -342,6 +434,17 @@ }; }; + cs2000: clk-multiplier@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&audio_clkout>, <&x19_clk>; /* audio_clkout_1, x19 */ + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; + eeprom@50 { compatible = "rohm,br24t01", "atmel,24c01"; reg = <0x50>; @@ -422,6 +525,11 @@ function = "i2c1"; }; + keys_pins: keys { + pins = "GP_4_12", "GP_4_13", "GP_4_14", "GP_4_15"; + bias-pull-up; + }; + pwm0_pins: pwm0 { groups = "pwm0_c"; function = "pwm0"; @@ -449,6 +557,17 @@ power-source = <1800>; }; + sound_pins: sound { + groups = "ssi34_ctrl", "ssi3_data", "ssi4_data_a"; + function = "ssi"; + }; + + sound_clk_pins: sound-clk { + groups = "audio_clk_a", "audio_clk_b", + "audio_clkout", "audio_clkout1"; + function = "audio_clk"; + }; + usb0_pins: usb0 { groups = "usb0"; function = "usb0"; @@ -474,6 +593,42 @@ status = "okay"; }; +&rcar_sound { + pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1 */ + #clock-cells = <1>; + clock-frequency = <12288000 11289600>; + + status = "okay"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>, + <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&cs2000>, <&audio_clk_b>, + <&cpg CPG_CORE R8A77995_CLK_ZA2>; + + ports { + rsnd_port0: port { + rsnd_for_ak4613: endpoint { + remote-endpoint = <&ak4613_endpoint>; + dai-format = "left_j"; + bitclock-master = <&rsnd_for_ak4613>; + frame-master = <&rsnd_for_ak4613>; + playback = <&ssi3>, <&src5>, <&dvc0>; + capture = <&ssi4>, <&src6>, <&dvc1>; + }; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; @@ -502,6 +657,10 @@ status = "okay"; }; +&ssi4 { + shared-pin; +}; + &usb2_phy0 { pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index 84dba3719381..16ad5fc23a67 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -15,6 +15,23 @@ #address-cells = <2>; #size-cells = <2>; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + /* External CAN clock - to be overridden by boards that provide it */ can_clk: can { compatible = "fixed-clock"; @@ -1016,6 +1033,147 @@ status = "disabled"; }; + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a77995", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>, + <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&cpg CPG_CORE R8A77995_CLK_ZA2>; + clock-names = "ssi-all", + "ssi.4", "ssi.3", + "src.6", "src.5", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_i"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1011>, <&cpg 1012>; + reset-names = "ssi-all", + "ssi.4", "ssi.3"; + status = "disabled"; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,src { + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma0 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma0 0xb4>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma0 0x08>, + <&audma0 0x6f>, <&audma0 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma0 0x0a>, + <&audma0 0x71>, <&audma0 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a77995", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>, + <&ipmmu_mp 2>, <&ipmmu_mp 3>, + <&ipmmu_mp 4>, <&ipmmu_mp 5>, + <&ipmmu_mp 6>, <&ipmmu_mp 7>, + <&ipmmu_mp 8>, <&ipmmu_mp 9>, + <&ipmmu_mp 10>, <&ipmmu_mp 11>, + <&ipmmu_mp 12>, <&ipmmu_mp 13>, + <&ipmmu_mp 14>, <&ipmmu_mp 15>; + }; + ohci0: usb@ee080000 { compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts index 687f019e79f0..dc671ff57ec7 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the Falcon CPU and BreakOut boards + * Device Tree Source for the Falcon CPU and BreakOut boards with R-Car V3U * * Copyright (C) 2020 Renesas Electronics Corp. */ diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index 78ca75f619f6..631d520cebee 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -327,6 +327,19 @@ #power-domain-cells = <1>; }; + tsc: thermal@e6190000 { + compatible = "renesas,r8a779a0-thermal"; + reg = <0 0xe6190000 0 0x200>, + <0 0xe6198000 0 0x200>, + <0 0xe61a0000 0 0x200>, + <0 0xe61a8000 0 0x200>, + <0 0xe61b0000 0 0x200>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 919>; + #thermal-sensor-cells = <1>; + }; + tmu0: timer@e61e0000 { compatible = "renesas,tmu-r8a779a0", "renesas,tmu"; reg = <0 0xe61e0000 0 0x30>; @@ -392,19 +405,6 @@ status = "disabled"; }; - tsc: thermal@e6190000 { - compatible = "renesas,r8a779a0-thermal"; - reg = <0 0xe6190000 0 0x200>, - <0 0xe6198000 0 0x200>, - <0 0xe61a0000 0 0x200>, - <0 0xe61a8000 0 0x200>, - <0 0xe61b0000 0 0x200>; - clocks = <&cpg CPG_MOD 919>; - power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 919>; - #thermal-sensor-cells = <1>; - }; - i2c0: i2c@e6500000 { compatible = "renesas,i2c-r8a779a0", "renesas,rcar-gen3-i2c"; diff --git a/arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts new file mode 100644 index 000000000000..084b75b04680 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the Salvator-X 2nd version board with R-Car H3e-2G + * + * Copyright (C) 2021 Glider bv + * + * Based on r8a77951-salvator-xs.dts + * Copyright (C) 2015-2017 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a779m1.dtsi" +#include "salvator-xs.dtsi" + +/ { + model = "Renesas Salvator-X 2nd version board based on r8a779m1"; + compatible = "renesas,salvator-xs", "renesas,r8a779m1", + "renesas,r8a7795"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + memory@500000000 { + device_type = "memory"; + reg = <0x5 0x00000000 0x0 0x40000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x40000000>; + }; + + memory@700000000 { + device_type = "memory"; + reg = <0x7 0x00000000 0x0 0x40000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 721>, + <&versaclock6 1>, + <&x21_clk>, + <&x22_clk>, + <&versaclock6 2>; + clock-names = "du.0", "du.1", "du.2", "du.3", + "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m1-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a779m1-ulcb-kf.dts new file mode 100644 index 000000000000..0baebc5c58b0 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m1-ulcb-kf.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3e-2G + * + * Copyright (C) 2021 Glider bv + * + * Based on r8a77951-ulcb-kf.dts + * Copyright (C) 2017 Renesas Electronics Corp. + * Copyright (C) 2017 Cogent Embedded, Inc. + */ + +#include "r8a779m1-ulcb.dts" +#include "ulcb-kf.dtsi" + +/ { + model = "Renesas H3ULCB Kingfisher board based on r8a779m1"; + compatible = "shimafuji,kingfisher", "renesas,h3ulcb", + "renesas,r8a779m1", "renesas,r8a7795"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts new file mode 100644 index 000000000000..e294b6bda28c --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) with R-Car H3e-2G + * + * Copyright (C) 2021 Glider bv + * + * Based on r8a77951-ulcb.dts + * + * Copyright (C) 2016 Renesas Electronics Corp. + * Copyright (C) 2016 Cogent Embedded, Inc. + */ + +/dts-v1/; +#include "r8a779m1.dtsi" +#include "ulcb.dtsi" + +/ { + model = "Renesas H3ULCB board based on r8a779m1"; + compatible = "renesas,h3ulcb", "renesas,r8a779m1", "renesas,r8a7795"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + memory@500000000 { + device_type = "memory"; + reg = <0x5 0x00000000 0x0 0x40000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x40000000>; + }; + + memory@700000000 { + device_type = "memory"; + reg = <0x7 0x00000000 0x0 0x40000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 721>, + <&versaclock5 1>, + <&versaclock5 3>, + <&versaclock5 4>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", "du.3", + "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m1.dtsi b/arch/arm64/boot/dts/renesas/r8a779m1.dtsi new file mode 100644 index 000000000000..0e9b04469b83 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m1.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car H3e-2G (R8A779M1) SoC + * + * Copyright (C) 2021 Glider bv + */ + +#include "r8a77951.dtsi" + +/ { + compatible = "renesas,r8a779m1", "renesas,r8a7795"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts new file mode 100644 index 000000000000..4ab26fd7233d --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the Salvator-X 2nd version board with R-Car M3e-2G + * + * Copyright (C) 2021 Glider bv + * + * Based on r8a77961-salvator-xs.dts + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a779m3.dtsi" +#include "salvator-xs.dtsi" + +/ { + model = "Renesas Salvator-X 2nd version board based on r8a779m3"; + compatible = "renesas,salvator-xs", "renesas,r8a779m3", + "renesas,r8a77961"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x1 0x00000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock6 1>, + <&x21_clk>, + <&versaclock6 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m3-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a779m3-ulcb-kf.dts new file mode 100644 index 000000000000..6bacee1d2ef5 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m3-ulcb-kf.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the M3ULCB Kingfisher board with R-Car M3e-2G + * + * Copyright (C) 2021 Glider bv + * + * Based on r8a77961-ulcb-kf.dts + * Copyright (C) 2020 Eugeniu Rosca <rosca.eugeniu@gmail.com> + */ + +#include "r8a779m3-ulcb.dts" +#include "ulcb-kf.dtsi" + +/ { + model = "Renesas M3ULCB Kingfisher board based on r8a779m3"; + compatible = "shimafuji,kingfisher", "renesas,m3ulcb", + "renesas,r8a779m3", "renesas,r8a77961"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts new file mode 100644 index 000000000000..8f215a0b771b --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) with R-Car M3e-2G + * + * Copyright (C) 2021 Glider bv + * + * Based on r8a77961-ulcb.dts + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a779m3.dtsi" +#include "ulcb.dtsi" + +/ { + model = "Renesas M3ULCB board based on r8a779m3"; + compatible = "renesas,m3ulcb", "renesas,r8a779m3", "renesas,r8a77961"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x1 0x00000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock5 1>, + <&versaclock5 3>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m3.dtsi b/arch/arm64/boot/dts/renesas/r8a779m3.dtsi new file mode 100644 index 000000000000..65bb6188ccf5 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m3.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car M3e-2G (R8A779M3) SoC + * + * Copyright (C) 2021 Glider bv + */ + +#include "r8a77961.dtsi" + +/ { + compatible = "renesas,r8a779m3", "renesas,r8a77961"; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index 734c8adeceba..5f3bc2898daf 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -13,6 +13,13 @@ #address-cells = <2>; #size-cells = <2>; + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */ extal_clk: extal { compatible = "fixed-clock"; @@ -82,11 +89,175 @@ <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "eri", "rxi", "txi", "bri", "dri", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_CLK_SCIF0>; + clocks = <&cpg CPG_MOD R9A07G044_SCIF0_CLK_PCK>; clock-names = "fck"; power-domains = <&cpg>; - resets = <&cpg R9A07G044_CLK_SCIF0>; + resets = <&cpg R9A07G044_SCIF0_RST_SYSTEM_N>; + status = "disabled"; + }; + + canfd: can@10050000 { + compatible = "renesas,r9a07g044-canfd", "renesas,rzg2l-canfd"; + reg = <0 0x10050000 0 0x8000>; + interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "g_err", "g_recc", + "ch0_err", "ch0_rec", "ch0_trx", + "ch1_err", "ch1_rec", "ch1_trx"; + clocks = <&cpg CPG_MOD R9A07G044_CANFD_PCLK>, + <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>; + assigned-clock-rates = <50000000>; + resets = <&cpg R9A07G044_CANFD_RSTP_N>, + <&cpg R9A07G044_CANFD_RSTC_N>; + reset-names = "rstp_n", "rstc_n"; + power-domains = <&cpg>; status = "disabled"; + + channel0 { + status = "disabled"; + }; + channel1 { + status = "disabled"; + }; + }; + + i2c0: i2c@10058000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; + reg = <0 0x10058000 0 0x400>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G044_I2C0_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G044_I2C0_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + i2c1: i2c@10058400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; + reg = <0 0x10058400 0 0x400>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G044_I2C1_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G044_I2C1_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + i2c2: i2c@10058800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; + reg = <0 0x10058800 0 0x400>; + interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G044_I2C2_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G044_I2C2_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + i2c3: i2c@10058c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; + reg = <0 0x10058c00 0 0x400>; + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G044_I2C3_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G044_I2C3_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + adc: adc@10059000 { + compatible = "renesas,r9a07g044-adc", "renesas,rzg2l-adc"; + reg = <0 0x10059000 0 0x400>; + interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD R9A07G044_ADC_ADCLK>, + <&cpg CPG_MOD R9A07G044_ADC_PCLK>; + clock-names = "adclk", "pclk"; + resets = <&cpg R9A07G044_ADC_PRESETN>, + <&cpg R9A07G044_ADC_ADRST_N>; + reset-names = "presetn", "adrst-n"; + power-domains = <&cpg>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + channel@1 { + reg = <1>; + }; + channel@2 { + reg = <2>; + }; + channel@3 { + reg = <3>; + }; + channel@4 { + reg = <4>; + }; + channel@5 { + reg = <5>; + }; + channel@6 { + reg = <6>; + }; + channel@7 { + reg = <7>; + }; }; cpg: clock-controller@11010000 { @@ -111,6 +282,19 @@ status = "disabled"; }; + pinctrl: pin-controller@11030000 { + compatible = "renesas,r9a07g044-pinctrl"; + reg = <0 0x11030000 0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 392>; + clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_GPIO_RSTN>, + <&cpg R9A07G044_GPIO_PORT_RESETN>, + <&cpg R9A07G044_GPIO_SPARE_RESETN>; + }; + gic: interrupt-controller@11900000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 453ffcef24fa..eb1f3b82300b 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -202,7 +202,11 @@ label = "rcar-sound"; dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1>; /* HDMI0 */ + &rsnd_port1 /* HDMI0 */ +#ifdef SOC_HAS_HDMI1 + &rsnd_port2 /* HDMI1 */ +#endif + >; }; vbus0_usb2: regulator-vbus0-usb2 { @@ -422,6 +426,31 @@ remote-endpoint = <&rcar_dw_hdmi0_out>; }; +#ifdef SOC_HAS_HDMI1 +&hdmi1 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + rcar_dw_hdmi1_out: endpoint { + remote-endpoint = <&hdmi1_con>; + }; + }; + port@2 { + reg = <2>; + dw_hdmi1_snd_in: endpoint { + remote-endpoint = <&rsnd_endpoint2>; + }; + }; + }; +}; + +&hdmi1_con { + remote-endpoint = <&rcar_dw_hdmi1_out>; +}; +#endif /* SOC_HAS_HDMI1 */ + &hscif1 { pinctrl-0 = <&hscif1_pins>; pinctrl-names = "default"; @@ -818,6 +847,21 @@ playback = <&ssi2>; }; }; + +#ifdef SOC_HAS_HDMI1 + rsnd_port2: port@2 { + reg = <2>; + rsnd_endpoint2: endpoint { + remote-endpoint = <&dw_hdmi1_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint2>; + frame-master = <&rsnd_endpoint2>; + + playback = <&ssi3>; + }; + }; +#endif /* SOC_HAS_HDMI1 */ }; }; @@ -826,6 +870,12 @@ status = "okay"; }; +#ifdef SOC_HAS_SATA +&sata { + status = "okay"; +}; +#endif /* SOC_HAS_SATA */ + &scif1 { pinctrl-0 = <&scif1_pins>; pinctrl-names = "default"; @@ -973,3 +1023,27 @@ status = "okay"; }; + +#ifdef SOC_HAS_USB2_CH2 +&ehci2 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&pfc { + usb2_pins: usb2 { + groups = "usb2"; + function = "usb2"; + }; +}; + +&usb2_phy2 { + pinctrl-0 = <&usb2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; +#endif /* SOC_HAS_USB2_CH2 */ diff --git a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi index 717d42758cbc..08b925624e12 100644 --- a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi @@ -27,3 +27,59 @@ clock-names = "xin"; }; }; + +#ifdef SOC_HAS_SATA +&pca9654 { + pcie-sata-switch-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-low; /* enable SATA by default */ + line-name = "PCIE/SATA switch"; + }; +}; + +/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ +#endif /* SOC_HAS_SATA */ + +#ifdef SOC_HAS_USB2_CH3 +&ehci3 { + dr_mode = "otg"; + status = "okay"; +}; + +&hsusb3 { + dr_mode = "otg"; + status = "okay"; +}; + +&ohci3 { + dr_mode = "otg"; + status = "okay"; +}; + +&pfc { + /* + * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins + * (when SW31 is the default setting on Salvator-XS). + * - If SW31 is the default setting, you cannot use USB2.0 ch3 on + * r8a77951 with Salvator-XS. + * Hence the SW31 setting must be changed like 2) below. + * 1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF: + * - Connect GP6_3[01] to ADV7842. + * 2) Changed setting of SW31: OFF-OFF-ON-ON-ON-ON: + * - Connect GP6_3[01] to BD082065 (USB2.0 ch3's host power). + * - Connect GP6_{04,21} to ADV7842. + */ + usb2_ch3_pins: usb2_ch3 { + groups = "usb2_ch3"; + function = "usb2_ch3"; + }; +}; + +&usb2_phy3 { + pinctrl-0 = <&usb2_ch3_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; +#endif /* SOC_HAS_USB2_CH3 */ diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index 02c3fdf9cc46..42d1d219a3fd 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -217,6 +217,12 @@ reg = <0x4044 0x8>; #phy-cells = <1>; }; + + epwm_tbclk: clock@4140 { + compatible = "ti,am64-epwm-tbclk", "syscon"; + reg = <0x4130 0x4>; + #clock-cells = <1>; + }; }; main_uart0: serial@2800000 { @@ -859,4 +865,112 @@ clock-names = "fck"; max-functions = /bits/ 8 <1>; }; + + epwm0: pwm@23000000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x0 0x23000000 0x0 0x100>; + power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>; + clock-names = "tbclk", "fck"; + }; + + epwm1: pwm@23010000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x0 0x23010000 0x0 0x100>; + power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>; + clock-names = "tbclk", "fck"; + }; + + epwm2: pwm@23020000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x0 0x23020000 0x0 0x100>; + power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>; + clock-names = "tbclk", "fck"; + }; + + epwm3: pwm@23030000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x0 0x23030000 0x0 0x100>; + power-domains = <&k3_pds 89 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 3>, <&k3_clks 89 0>; + clock-names = "tbclk", "fck"; + }; + + epwm4: pwm@23040000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x0 0x23040000 0x0 0x100>; + power-domains = <&k3_pds 90 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 4>, <&k3_clks 90 0>; + clock-names = "tbclk", "fck"; + }; + + epwm5: pwm@23050000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x0 0x23050000 0x0 0x100>; + power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 5>, <&k3_clks 91 0>; + clock-names = "tbclk", "fck"; + }; + + epwm6: pwm@23060000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x0 0x23060000 0x0 0x100>; + power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 6>, <&k3_clks 92 0>; + clock-names = "tbclk", "fck"; + }; + + epwm7: pwm@23070000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x0 0x23070000 0x0 0x100>; + power-domains = <&k3_pds 93 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 7>, <&k3_clks 93 0>; + clock-names = "tbclk", "fck"; + }; + + epwm8: pwm@23080000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x0 0x23080000 0x0 0x100>; + power-domains = <&k3_pds 94 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 8>, <&k3_clks 94 0>; + clock-names = "tbclk", "fck"; + }; + + ecap0: pwm@23100000 { + compatible = "ti,am64-ecap", "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x0 0x23100000 0x0 0x60>; + power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 51 0>; + clock-names = "fck"; + }; + + ecap1: pwm@23110000 { + compatible = "ti,am64-ecap", "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x0 0x23110000 0x0 0x60>; + power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 52 0>; + clock-names = "fck"; + }; + + ecap2: pwm@23120000 { + compatible = "ti,am64-ecap", "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x0 0x23120000 0x0 0x60>; + power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 53 0>; + clock-names = "fck"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index 030712221188..24ce4942618d 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -288,6 +288,12 @@ AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */ >; }; + + main_ecap0_pins_default: main-ecap0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ + >; + }; }; &main_uart0 { @@ -574,3 +580,53 @@ num-lanes = <1>; status = "disabled"; }; + +&ecap0 { + /* PWM is available on Pin 1 of header J12 */ + pinctrl-names = "default"; + pinctrl-0 = <&main_ecap0_pins_default>; +}; + +&ecap1 { + status = "disabled"; +}; + +&ecap2 { + status = "disabled"; +}; + +&epwm0 { + status = "disabled"; +}; + +&epwm1 { + status = "disabled"; +}; + +&epwm2 { + status = "disabled"; +}; + +&epwm3 { + status = "disabled"; +}; + +&epwm4 { + status = "disabled"; +}; + +&epwm5 { + status = "disabled"; +}; + +&epwm6 { + status = "disabled"; +}; + +&epwm7 { + status = "disabled"; +}; + +&epwm8 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index d3aa2901e6fd..6b45cdeeeefa 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -210,6 +210,12 @@ AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */ >; }; + + main_ecap0_pins_default: main-ecap0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ + >; + }; }; &mcu_uart0 { @@ -453,3 +459,61 @@ &pcie0_ep { status = "disabled"; }; + +&ecap0 { + /* PWM is available on Pin 1 of header J3 */ + pinctrl-names = "default"; + pinctrl-0 = <&main_ecap0_pins_default>; +}; + +&ecap1 { + status = "disabled"; +}; + +&ecap2 { + status = "disabled"; +}; + +&epwm0 { + status = "disabled"; +}; + +&epwm1 { + status = "disabled"; +}; + +&epwm2 { + status = "disabled"; +}; + +&epwm3 { + status = "disabled"; +}; + +&epwm4 { + /* + * EPWM4_A, EPWM4_B is available on Pin 32 and 33 on J4 (RPi hat) + * But RPi Hat will be used for other use cases, so marking epwm4 as disabled. + */ + status = "disabled"; +}; + +&epwm5 { + /* + * EPWM5_A, EPWM5_B is available on Pin 29 and 31 on J4 (RPi hat) + * But RPi Hat will be used for other use cases, so marking epwm5 as disabled. + */ + status = "disabled"; +}; + +&epwm6 { + status = "disabled"; +}; + +&epwm7 { + status = "disabled"; +}; + +&epwm8 { + status = "disabled"; +}; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index f423d08b9a71..156d96afbbfc 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -973,6 +973,7 @@ CONFIG_TI_SCI_CLK=y CONFIG_COMMON_CLK_QCOM=y CONFIG_QCOM_A53PLL=y CONFIG_QCOM_CLK_APCS_MSM8916=y +CONFIG_QCOM_CLK_APCC_MSM8996=y CONFIG_QCOM_CLK_SMD_RPM=y CONFIG_QCOM_CLK_RPMH=y CONFIG_IPQ_GCC_8074=y diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig index b8eb0453123d..55f19450091b 100644 --- a/arch/arm64/crypto/Kconfig +++ b/arch/arm64/crypto/Kconfig @@ -51,7 +51,7 @@ config CRYPTO_SM4_ARM64_CE tristate "SM4 symmetric cipher (ARMv8.2 Crypto Extensions)" depends on KERNEL_MODE_NEON select CRYPTO_ALGAPI - select CRYPTO_SM4 + select CRYPTO_LIB_SM4 config CRYPTO_GHASH_ARM64_CE tristate "GHASH/AES-GCM using ARMv8 Crypto Extensions" diff --git a/arch/arm64/crypto/sm4-ce-glue.c b/arch/arm64/crypto/sm4-ce-glue.c index 2754c875d39c..9c93cfc4841b 100644 --- a/arch/arm64/crypto/sm4-ce-glue.c +++ b/arch/arm64/crypto/sm4-ce-glue.c @@ -17,12 +17,20 @@ MODULE_LICENSE("GPL v2"); asmlinkage void sm4_ce_do_crypt(const u32 *rk, void *out, const void *in); +static int sm4_ce_setkey(struct crypto_tfm *tfm, const u8 *key, + unsigned int key_len) +{ + struct sm4_ctx *ctx = crypto_tfm_ctx(tfm); + + return sm4_expandkey(ctx, key, key_len); +} + static void sm4_ce_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) { - const struct crypto_sm4_ctx *ctx = crypto_tfm_ctx(tfm); + const struct sm4_ctx *ctx = crypto_tfm_ctx(tfm); if (!crypto_simd_usable()) { - crypto_sm4_encrypt(tfm, out, in); + sm4_crypt_block(ctx->rkey_enc, out, in); } else { kernel_neon_begin(); sm4_ce_do_crypt(ctx->rkey_enc, out, in); @@ -32,10 +40,10 @@ static void sm4_ce_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) static void sm4_ce_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) { - const struct crypto_sm4_ctx *ctx = crypto_tfm_ctx(tfm); + const struct sm4_ctx *ctx = crypto_tfm_ctx(tfm); if (!crypto_simd_usable()) { - crypto_sm4_decrypt(tfm, out, in); + sm4_crypt_block(ctx->rkey_dec, out, in); } else { kernel_neon_begin(); sm4_ce_do_crypt(ctx->rkey_dec, out, in); @@ -49,12 +57,12 @@ static struct crypto_alg sm4_ce_alg = { .cra_priority = 200, .cra_flags = CRYPTO_ALG_TYPE_CIPHER, .cra_blocksize = SM4_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct crypto_sm4_ctx), + .cra_ctxsize = sizeof(struct sm4_ctx), .cra_module = THIS_MODULE, .cra_u.cipher = { .cia_min_keysize = SM4_KEY_SIZE, .cia_max_keysize = SM4_KEY_SIZE, - .cia_setkey = crypto_sm4_set_key, + .cia_setkey = sm4_ce_setkey, .cia_encrypt = sm4_ce_encrypt, .cia_decrypt = sm4_ce_decrypt } diff --git a/arch/arm64/hyperv/Makefile b/arch/arm64/hyperv/Makefile new file mode 100644 index 000000000000..87c31c001da9 --- /dev/null +++ b/arch/arm64/hyperv/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-y := hv_core.o mshyperv.o diff --git a/arch/arm64/hyperv/hv_core.c b/arch/arm64/hyperv/hv_core.c new file mode 100644 index 000000000000..b54c34793701 --- /dev/null +++ b/arch/arm64/hyperv/hv_core.c @@ -0,0 +1,181 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * Low level utility routines for interacting with Hyper-V. + * + * Copyright (C) 2021, Microsoft, Inc. + * + * Author : Michael Kelley <mikelley@microsoft.com> + */ + +#include <linux/types.h> +#include <linux/export.h> +#include <linux/mm.h> +#include <linux/hyperv.h> +#include <linux/arm-smccc.h> +#include <linux/module.h> +#include <asm-generic/bug.h> +#include <asm/hyperv-tlfs.h> +#include <asm/mshyperv.h> + +/* + * hv_do_hypercall- Invoke the specified hypercall + */ +u64 hv_do_hypercall(u64 control, void *input, void *output) +{ + struct arm_smccc_res res; + u64 input_address; + u64 output_address; + + input_address = input ? virt_to_phys(input) : 0; + output_address = output ? virt_to_phys(output) : 0; + + arm_smccc_1_1_hvc(HV_FUNC_ID, control, + input_address, output_address, &res); + return res.a0; +} +EXPORT_SYMBOL_GPL(hv_do_hypercall); + +/* + * hv_do_fast_hypercall8 -- Invoke the specified hypercall + * with arguments in registers instead of physical memory. + * Avoids the overhead of virt_to_phys for simple hypercalls. + */ + +u64 hv_do_fast_hypercall8(u16 code, u64 input) +{ + struct arm_smccc_res res; + u64 control; + + control = (u64)code | HV_HYPERCALL_FAST_BIT; + + arm_smccc_1_1_hvc(HV_FUNC_ID, control, input, &res); + return res.a0; +} +EXPORT_SYMBOL_GPL(hv_do_fast_hypercall8); + +/* + * Set a single VP register to a 64-bit value. + */ +void hv_set_vpreg(u32 msr, u64 value) +{ + struct arm_smccc_res res; + + arm_smccc_1_1_hvc(HV_FUNC_ID, + HVCALL_SET_VP_REGISTERS | HV_HYPERCALL_FAST_BIT | + HV_HYPERCALL_REP_COMP_1, + HV_PARTITION_ID_SELF, + HV_VP_INDEX_SELF, + msr, + 0, + value, + 0, + &res); + + /* + * Something is fundamentally broken in the hypervisor if + * setting a VP register fails. There's really no way to + * continue as a guest VM, so panic. + */ + BUG_ON(!hv_result_success(res.a0)); +} +EXPORT_SYMBOL_GPL(hv_set_vpreg); + +/* + * Get the value of a single VP register. One version + * returns just 64 bits and another returns the full 128 bits. + * The two versions are separate to avoid complicating the + * calling sequence for the more frequently used 64 bit version. + */ + +void hv_get_vpreg_128(u32 msr, struct hv_get_vp_registers_output *result) +{ + struct arm_smccc_1_2_regs args; + struct arm_smccc_1_2_regs res; + + args.a0 = HV_FUNC_ID; + args.a1 = HVCALL_GET_VP_REGISTERS | HV_HYPERCALL_FAST_BIT | + HV_HYPERCALL_REP_COMP_1; + args.a2 = HV_PARTITION_ID_SELF; + args.a3 = HV_VP_INDEX_SELF; + args.a4 = msr; + + /* + * Use the SMCCC 1.2 interface because the results are in registers + * beyond X0-X3. + */ + arm_smccc_1_2_hvc(&args, &res); + + /* + * Something is fundamentally broken in the hypervisor if + * getting a VP register fails. There's really no way to + * continue as a guest VM, so panic. + */ + BUG_ON(!hv_result_success(res.a0)); + + result->as64.low = res.a6; + result->as64.high = res.a7; +} +EXPORT_SYMBOL_GPL(hv_get_vpreg_128); + +u64 hv_get_vpreg(u32 msr) +{ + struct hv_get_vp_registers_output output; + + hv_get_vpreg_128(msr, &output); + + return output.as64.low; +} +EXPORT_SYMBOL_GPL(hv_get_vpreg); + +/* + * hyperv_report_panic - report a panic to Hyper-V. This function uses + * the older version of the Hyper-V interface that admittedly doesn't + * pass enough information to be useful beyond just recording the + * occurrence of a panic. The parallel hv_kmsg_dump() uses the + * new interface that allows reporting 4 Kbytes of data, which is much + * more useful. Hyper-V on ARM64 always supports the newer interface, but + * we retain support for the older version because the sysadmin is allowed + * to disable the newer version via sysctl in case of information security + * concerns about the more verbose version. + */ +void hyperv_report_panic(struct pt_regs *regs, long err, bool in_die) +{ + static bool panic_reported; + u64 guest_id; + + /* Don't report a panic to Hyper-V if we're not going to panic */ + if (in_die && !panic_on_oops) + return; + + /* + * We prefer to report panic on 'die' chain as we have proper + * registers to report, but if we miss it (e.g. on BUG()) we need + * to report it on 'panic'. + * + * Calling code in the 'die' and 'panic' paths ensures that only + * one CPU is running this code, so no atomicity is needed. + */ + if (panic_reported) + return; + panic_reported = true; + + guest_id = hv_get_vpreg(HV_REGISTER_GUEST_OSID); + + /* + * Hyper-V provides the ability to store only 5 values. + * Pick the passed in error value, the guest_id, the PC, + * and the SP. + */ + hv_set_vpreg(HV_REGISTER_CRASH_P0, err); + hv_set_vpreg(HV_REGISTER_CRASH_P1, guest_id); + hv_set_vpreg(HV_REGISTER_CRASH_P2, regs->pc); + hv_set_vpreg(HV_REGISTER_CRASH_P3, regs->sp); + hv_set_vpreg(HV_REGISTER_CRASH_P4, 0); + + /* + * Let Hyper-V know there is crash data available + */ + hv_set_vpreg(HV_REGISTER_CRASH_CTL, HV_CRASH_CTL_CRASH_NOTIFY); +} +EXPORT_SYMBOL_GPL(hyperv_report_panic); diff --git a/arch/arm64/hyperv/mshyperv.c b/arch/arm64/hyperv/mshyperv.c new file mode 100644 index 000000000000..bbbe351e9045 --- /dev/null +++ b/arch/arm64/hyperv/mshyperv.c @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * Core routines for interacting with Microsoft's Hyper-V hypervisor, + * including hypervisor initialization. + * + * Copyright (C) 2021, Microsoft, Inc. + * + * Author : Michael Kelley <mikelley@microsoft.com> + */ + +#include <linux/types.h> +#include <linux/acpi.h> +#include <linux/export.h> +#include <linux/errno.h> +#include <linux/version.h> +#include <linux/cpuhotplug.h> +#include <asm/mshyperv.h> + +static bool hyperv_initialized; + +static int __init hyperv_init(void) +{ + struct hv_get_vp_registers_output result; + u32 a, b, c, d; + u64 guest_id; + int ret; + + /* + * Allow for a kernel built with CONFIG_HYPERV to be running in + * a non-Hyper-V environment, including on DT instead of ACPI. + * In such cases, do nothing and return success. + */ + if (acpi_disabled) + return 0; + + if (strncmp((char *)&acpi_gbl_FADT.hypervisor_id, "MsHyperV", 8)) + return 0; + + /* Setup the guest ID */ + guest_id = generate_guest_id(0, LINUX_VERSION_CODE, 0); + hv_set_vpreg(HV_REGISTER_GUEST_OSID, guest_id); + + /* Get the features and hints from Hyper-V */ + hv_get_vpreg_128(HV_REGISTER_FEATURES, &result); + ms_hyperv.features = result.as32.a; + ms_hyperv.priv_high = result.as32.b; + ms_hyperv.misc_features = result.as32.c; + + hv_get_vpreg_128(HV_REGISTER_ENLIGHTENMENTS, &result); + ms_hyperv.hints = result.as32.a; + + pr_info("Hyper-V: privilege flags low 0x%x, high 0x%x, hints 0x%x, misc 0x%x\n", + ms_hyperv.features, ms_hyperv.priv_high, ms_hyperv.hints, + ms_hyperv.misc_features); + + /* Get information about the Hyper-V host version */ + hv_get_vpreg_128(HV_REGISTER_HYPERVISOR_VERSION, &result); + a = result.as32.a; + b = result.as32.b; + c = result.as32.c; + d = result.as32.d; + pr_info("Hyper-V: Host Build %d.%d.%d.%d-%d-%d\n", + b >> 16, b & 0xFFFF, a, d & 0xFFFFFF, c, d >> 24); + + ret = hv_common_init(); + if (ret) + return ret; + + ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "arm64/hyperv_init:online", + hv_common_cpu_init, hv_common_cpu_die); + if (ret < 0) { + hv_common_free(); + return ret; + } + + hyperv_initialized = true; + return 0; +} + +early_initcall(hyperv_init); + +bool hv_is_hyperv_initialized(void) +{ + return hyperv_initialized; +} +EXPORT_SYMBOL_GPL(hv_is_hyperv_initialized); diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index bd68e1b7f29f..7535dc7cc5aa 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -50,6 +50,9 @@ pgprot_t __acpi_get_mem_attribute(phys_addr_t addr); void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size); #define acpi_os_ioremap acpi_os_ioremap +void __iomem *acpi_os_memmap(acpi_physical_address phys, acpi_size size); +#define acpi_os_memmap acpi_os_memmap + typedef u64 phys_cpuid_t; #define PHYS_CPUID_INVALID INVALID_HWID diff --git a/arch/arm64/include/asm/cache.h b/arch/arm64/include/asm/cache.h index a9c0716e7440..a074459f8f2f 100644 --- a/arch/arm64/include/asm/cache.h +++ b/arch/arm64/include/asm/cache.h @@ -47,7 +47,7 @@ * cache before the transfer is done, causing old data to be seen by * the CPU. */ -#define ARCH_DMA_MINALIGN L1_CACHE_BYTES +#define ARCH_DMA_MINALIGN (128) #ifdef CONFIG_KASAN_SW_TAGS #define ARCH_SLAB_MINALIGN (1ULL << KASAN_SHADOW_SCALE_SHIFT) diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h index 23a9fb73c04f..eaa6ca062d89 100644 --- a/arch/arm64/include/asm/compat.h +++ b/arch/arm64/include/asm/compat.h @@ -5,6 +5,9 @@ #ifndef __ASM_COMPAT_H #define __ASM_COMPAT_H +#define compat_mode_t compat_mode_t +typedef u16 compat_mode_t; + #include <asm-generic/compat.h> #ifdef CONFIG_COMPAT @@ -27,13 +30,9 @@ typedef u16 __compat_uid_t; typedef u16 __compat_gid_t; typedef u16 __compat_uid16_t; typedef u16 __compat_gid16_t; -typedef u32 __compat_uid32_t; -typedef u32 __compat_gid32_t; -typedef u16 compat_mode_t; typedef u32 compat_dev_t; typedef s32 compat_nlink_t; typedef u16 compat_ipc_pid_t; -typedef u32 compat_caddr_t; typedef __kernel_fsid_t compat_fsid_t; struct compat_stat { @@ -103,23 +102,11 @@ struct compat_statfs { #define COMPAT_RLIM_INFINITY 0xffffffff -typedef u32 compat_old_sigset_t; - -#define _COMPAT_NSIG 64 -#define _COMPAT_NSIG_BPW 32 - -typedef u32 compat_sigset_word; - #define COMPAT_OFF_T_MAX 0x7fffffff #define compat_user_stack_pointer() (user_stack_pointer(task_pt_regs(current))) #define COMPAT_MINSIGSTKSZ 2048 -static inline void __user *arch_compat_alloc_user_space(long len) -{ - return (void __user *)compat_user_stack_pointer() - len; -} - struct compat_ipc64_perm { compat_key_t key; __compat_uid32_t uid; diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h index 9bb9d11750d7..ef6be92b1921 100644 --- a/arch/arm64/include/asm/cpufeature.h +++ b/arch/arm64/include/asm/cpufeature.h @@ -552,7 +552,7 @@ cpuid_feature_cap_perfmon_field(u64 features, int field, u64 cap) u64 mask = GENMASK_ULL(field + 3, field); /* Treat IMPLEMENTATION DEFINED functionality as unimplemented */ - if (val == 0xf) + if (val == ID_AA64DFR0_PMUVER_IMP_DEF) val = 0; if (val > cap) { @@ -602,14 +602,14 @@ static inline bool id_aa64pfr0_32bit_el1(u64 pfr0) { u32 val = cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_EL1_SHIFT); - return val == ID_AA64PFR0_EL1_32BIT_64BIT; + return val == ID_AA64PFR0_ELx_32BIT_64BIT; } static inline bool id_aa64pfr0_32bit_el0(u64 pfr0) { u32 val = cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_EL0_SHIFT); - return val == ID_AA64PFR0_EL0_32BIT_64BIT; + return val == ID_AA64PFR0_ELx_32BIT_64BIT; } static inline bool id_aa64pfr0_sve(u64 pfr0) @@ -657,7 +657,8 @@ static inline bool system_supports_4kb_granule(void) val = cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_TGRAN4_SHIFT); - return val == ID_AA64MMFR0_TGRAN4_SUPPORTED; + return (val >= ID_AA64MMFR0_TGRAN4_SUPPORTED_MIN) && + (val <= ID_AA64MMFR0_TGRAN4_SUPPORTED_MAX); } static inline bool system_supports_64kb_granule(void) @@ -669,7 +670,8 @@ static inline bool system_supports_64kb_granule(void) val = cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_TGRAN64_SHIFT); - return val == ID_AA64MMFR0_TGRAN64_SUPPORTED; + return (val >= ID_AA64MMFR0_TGRAN64_SUPPORTED_MIN) && + (val <= ID_AA64MMFR0_TGRAN64_SUPPORTED_MAX); } static inline bool system_supports_16kb_granule(void) @@ -681,7 +683,8 @@ static inline bool system_supports_16kb_granule(void) val = cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_TGRAN16_SHIFT); - return val == ID_AA64MMFR0_TGRAN16_SUPPORTED; + return (val >= ID_AA64MMFR0_TGRAN16_SUPPORTED_MIN) && + (val <= ID_AA64MMFR0_TGRAN16_SUPPORTED_MAX); } static inline bool system_supports_mixed_endian_el0(void) @@ -781,13 +784,13 @@ extern int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt); static inline u32 id_aa64mmfr0_parange_to_phys_shift(int parange) { switch (parange) { - case 0: return 32; - case 1: return 36; - case 2: return 40; - case 3: return 42; - case 4: return 44; - case 5: return 48; - case 6: return 52; + case ID_AA64MMFR0_PARANGE_32: return 32; + case ID_AA64MMFR0_PARANGE_36: return 36; + case ID_AA64MMFR0_PARANGE_40: return 40; + case ID_AA64MMFR0_PARANGE_42: return 42; + case ID_AA64MMFR0_PARANGE_44: return 44; + case ID_AA64MMFR0_PARANGE_48: return 48; + case ID_AA64MMFR0_PARANGE_52: return 52; /* * A future PE could use a value unknown to the kernel. * However, by the "D10.1.4 Principles of the ID scheme diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h index 1bed37eb013a..d3e1825337be 100644 --- a/arch/arm64/include/asm/efi.h +++ b/arch/arm64/include/asm/efi.h @@ -14,6 +14,7 @@ #ifdef CONFIG_EFI extern void efi_init(void); +extern void efifb_setup_from_dmi(struct screen_info *si, const char *opt); #else #define efi_init() #endif @@ -85,10 +86,6 @@ static inline void free_screen_info(struct screen_info *si) { } -static inline void efifb_setup_from_dmi(struct screen_info *si, const char *opt) -{ -} - #define EFI_ALLOC_ALIGN SZ_64K /* diff --git a/arch/arm64/include/asm/el2_setup.h b/arch/arm64/include/asm/el2_setup.h index 21fa330f498d..3198acb2aad8 100644 --- a/arch/arm64/include/asm/el2_setup.h +++ b/arch/arm64/include/asm/el2_setup.h @@ -33,8 +33,7 @@ * EL2. */ .macro __init_el2_timers - mrs x0, cnthctl_el2 - orr x0, x0, #3 // Enable EL1 physical timers + mov x0, #3 // Enable EL1 physical timers msr cnthctl_el2, x0 msr cntvoff_el2, xzr // Clear virtual offset .endm @@ -150,8 +149,17 @@ ubfx x1, x1, #ID_AA64MMFR0_FGT_SHIFT, #4 cbz x1, .Lskip_fgt_\@ - msr_s SYS_HDFGRTR_EL2, xzr - msr_s SYS_HDFGWTR_EL2, xzr + mov x0, xzr + mrs x1, id_aa64dfr0_el1 + ubfx x1, x1, #ID_AA64DFR0_PMSVER_SHIFT, #4 + cmp x1, #3 + b.lt .Lset_fgt_\@ + /* Disable PMSNEVFR_EL1 read and write traps */ + orr x0, x0, #(1 << 62) + +.Lset_fgt_\@: + msr_s SYS_HDFGRTR_EL2, x0 + msr_s SYS_HDFGWTR_EL2, x0 msr_s SYS_HFGRTR_EL2, xzr msr_s SYS_HFGWTR_EL2, xzr msr_s SYS_HFGITR_EL2, xzr diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h index 8d1c8dcb87fd..97932fbf973d 100644 --- a/arch/arm64/include/asm/elf.h +++ b/arch/arm64/include/asm/elf.h @@ -213,10 +213,8 @@ typedef compat_elf_greg_t compat_elf_gregset_t[COMPAT_ELF_NGREG]; /* AArch32 EABI. */ #define EF_ARM_EABI_MASK 0xff000000 -#define compat_elf_check_arch(x) (system_supports_32bit_el0() && \ - ((x)->e_machine == EM_ARM) && \ - ((x)->e_flags & EF_ARM_EABI_MASK)) - +int compat_elf_check_arch(const struct elf32_hdr *); +#define compat_elf_check_arch compat_elf_check_arch #define compat_start_thread compat_start_thread /* * Unlike the native SET_PERSONALITY macro, the compat version maintains diff --git a/arch/arm64/include/asm/exception.h b/arch/arm64/include/asm/exception.h index 4afbc45b8bb0..339477dca551 100644 --- a/arch/arm64/include/asm/exception.h +++ b/arch/arm64/include/asm/exception.h @@ -55,8 +55,8 @@ asmlinkage void el0t_32_error_handler(struct pt_regs *regs); asmlinkage void call_on_irq_stack(struct pt_regs *regs, void (*func)(struct pt_regs *)); -asmlinkage void enter_from_user_mode(void); -asmlinkage void exit_to_user_mode(void); +asmlinkage void asm_exit_to_user_mode(struct pt_regs *regs); + void do_mem_abort(unsigned long far, unsigned int esr, struct pt_regs *regs); void do_undefinstr(struct pt_regs *regs); void do_bti(struct pt_regs *regs); @@ -73,6 +73,7 @@ void do_el0_svc(struct pt_regs *regs); void do_el0_svc_compat(struct pt_regs *regs); void do_ptrauth_fault(struct pt_regs *regs, unsigned int esr); void do_serror(struct pt_regs *regs, unsigned int esr); +void do_notify_resume(struct pt_regs *regs, unsigned long thread_flags); void panic_bad_stack(struct pt_regs *regs, unsigned int esr, unsigned long far); #endif /* __ASM_EXCEPTION_H */ diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h index c072161d5c65..9a62884183e5 100644 --- a/arch/arm64/include/asm/fpsimd.h +++ b/arch/arm64/include/asm/fpsimd.h @@ -45,7 +45,6 @@ extern void fpsimd_preserve_current_state(void); extern void fpsimd_restore_current_state(void); extern void fpsimd_update_current_state(struct user_fpsimd_state const *state); -extern void fpsimd_bind_task_to_cpu(void); extern void fpsimd_bind_state_to_cpu(struct user_fpsimd_state *state, void *sve_state, unsigned int sve_vl); diff --git a/arch/arm64/include/asm/fpsimdmacros.h b/arch/arm64/include/asm/fpsimdmacros.h index 059204477ce6..00a2c0b69c2b 100644 --- a/arch/arm64/include/asm/fpsimdmacros.h +++ b/arch/arm64/include/asm/fpsimdmacros.h @@ -94,6 +94,7 @@ .endm /* SVE instruction encodings for non-SVE-capable assemblers */ +/* (pre binutils 2.28, all kernel capable clang versions support SVE) */ /* STR (vector): STR Z\nz, [X\nxbase, #\offset, MUL VL] */ .macro _sve_str_v nz, nxbase, offset=0 diff --git a/arch/arm64/include/asm/hwcap.h b/arch/arm64/include/asm/hwcap.h index 9a5498c2c8ee..8c129db8232a 100644 --- a/arch/arm64/include/asm/hwcap.h +++ b/arch/arm64/include/asm/hwcap.h @@ -18,7 +18,7 @@ #define COMPAT_HWCAP_EDSP (1 << 7) #define COMPAT_HWCAP_JAVA (1 << 8) #define COMPAT_HWCAP_IWMMXT (1 << 9) -#define COMPAT_HWCAP_CRUNCH (1 << 10) +#define COMPAT_HWCAP_CRUNCH (1 << 10) /* Obsolete */ #define COMPAT_HWCAP_THUMBEE (1 << 11) #define COMPAT_HWCAP_NEON (1 << 12) #define COMPAT_HWCAP_VFPv3 (1 << 13) diff --git a/arch/arm64/include/asm/hyperv-tlfs.h b/arch/arm64/include/asm/hyperv-tlfs.h new file mode 100644 index 000000000000..4d964a7f02ee --- /dev/null +++ b/arch/arm64/include/asm/hyperv-tlfs.h @@ -0,0 +1,69 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* + * This file contains definitions from the Hyper-V Hypervisor Top-Level + * Functional Specification (TLFS): + * https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/reference/tlfs + * + * Copyright (C) 2021, Microsoft, Inc. + * + * Author : Michael Kelley <mikelley@microsoft.com> + */ + +#ifndef _ASM_HYPERV_TLFS_H +#define _ASM_HYPERV_TLFS_H + +#include <linux/types.h> + +/* + * All data structures defined in the TLFS that are shared between Hyper-V + * and a guest VM use Little Endian byte ordering. This matches the default + * byte ordering of Linux running on ARM64, so no special handling is required. + */ + +/* + * These Hyper-V registers provide information equivalent to the CPUID + * instruction on x86/x64. + */ +#define HV_REGISTER_HYPERVISOR_VERSION 0x00000100 /*CPUID 0x40000002 */ +#define HV_REGISTER_FEATURES 0x00000200 /*CPUID 0x40000003 */ +#define HV_REGISTER_ENLIGHTENMENTS 0x00000201 /*CPUID 0x40000004 */ + +/* + * Group C Features. See the asm-generic version of hyperv-tlfs.h + * for a description of Feature Groups. + */ + +/* Crash MSRs available */ +#define HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE BIT(8) + +/* STIMER direct mode is available */ +#define HV_STIMER_DIRECT_MODE_AVAILABLE BIT(13) + +/* + * Synthetic register definitions equivalent to MSRs on x86/x64 + */ +#define HV_REGISTER_CRASH_P0 0x00000210 +#define HV_REGISTER_CRASH_P1 0x00000211 +#define HV_REGISTER_CRASH_P2 0x00000212 +#define HV_REGISTER_CRASH_P3 0x00000213 +#define HV_REGISTER_CRASH_P4 0x00000214 +#define HV_REGISTER_CRASH_CTL 0x00000215 + +#define HV_REGISTER_GUEST_OSID 0x00090002 +#define HV_REGISTER_VP_INDEX 0x00090003 +#define HV_REGISTER_TIME_REF_COUNT 0x00090004 +#define HV_REGISTER_REFERENCE_TSC 0x00090017 + +#define HV_REGISTER_SINT0 0x000A0000 +#define HV_REGISTER_SCONTROL 0x000A0010 +#define HV_REGISTER_SIEFP 0x000A0012 +#define HV_REGISTER_SIMP 0x000A0013 +#define HV_REGISTER_EOM 0x000A0014 + +#define HV_REGISTER_STIMER0_CONFIG 0x000B0000 +#define HV_REGISTER_STIMER0_COUNT 0x000B0001 + +#include <asm-generic/hyperv-tlfs.h> + +#endif diff --git a/arch/arm64/include/asm/kernel-pgtable.h b/arch/arm64/include/asm/kernel-pgtable.h index 3512184cfec1..96dc0f7da258 100644 --- a/arch/arm64/include/asm/kernel-pgtable.h +++ b/arch/arm64/include/asm/kernel-pgtable.h @@ -65,8 +65,8 @@ #define EARLY_KASLR (0) #endif -#define EARLY_ENTRIES(vstart, vend, shift) (((vend) >> (shift)) \ - - ((vstart) >> (shift)) + 1 + EARLY_KASLR) +#define EARLY_ENTRIES(vstart, vend, shift) \ + ((((vend) - 1) >> (shift)) - ((vstart) >> (shift)) + 1 + EARLY_KASLR) #define EARLY_PGDS(vstart, vend) (EARLY_ENTRIES(vstart, vend, PGDIR_SHIFT)) diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h index d436831dd706..327120c0089f 100644 --- a/arch/arm64/include/asm/kvm_arm.h +++ b/arch/arm64/include/asm/kvm_arm.h @@ -12,8 +12,13 @@ #include <asm/types.h> /* Hyp Configuration Register (HCR) bits */ + +#define HCR_TID5 (UL(1) << 58) +#define HCR_DCT (UL(1) << 57) #define HCR_ATA_SHIFT 56 #define HCR_ATA (UL(1) << HCR_ATA_SHIFT) +#define HCR_AMVOFFEN (UL(1) << 51) +#define HCR_FIEN (UL(1) << 47) #define HCR_FWB (UL(1) << 46) #define HCR_API (UL(1) << 41) #define HCR_APK (UL(1) << 40) @@ -32,9 +37,9 @@ #define HCR_TVM (UL(1) << 26) #define HCR_TTLB (UL(1) << 25) #define HCR_TPU (UL(1) << 24) -#define HCR_TPC (UL(1) << 23) +#define HCR_TPC (UL(1) << 23) /* HCR_TPCP if FEAT_DPB */ #define HCR_TSW (UL(1) << 22) -#define HCR_TAC (UL(1) << 21) +#define HCR_TACR (UL(1) << 21) #define HCR_TIDCP (UL(1) << 20) #define HCR_TSC (UL(1) << 19) #define HCR_TID3 (UL(1) << 18) @@ -56,12 +61,13 @@ #define HCR_PTW (UL(1) << 2) #define HCR_SWIO (UL(1) << 1) #define HCR_VM (UL(1) << 0) +#define HCR_RES0 ((UL(1) << 48) | (UL(1) << 39)) /* * The bits we set in HCR: * TLOR: Trap LORegion register accesses * RW: 64bit by default, can be overridden for 32bit VMs - * TAC: Trap ACTLR + * TACR: Trap ACTLR * TSC: Trap SMC * TSW: Trap cache operations by set/way * TWE: Trap WFE @@ -76,7 +82,7 @@ * PTW: Take a stage2 fault if a stage1 walk steps in device memory */ #define HCR_GUEST_FLAGS (HCR_TSC | HCR_TSW | HCR_TWE | HCR_TWI | HCR_VM | \ - HCR_BSU_IS | HCR_FB | HCR_TAC | \ + HCR_BSU_IS | HCR_FB | HCR_TACR | \ HCR_AMO | HCR_SWIO | HCR_TIDCP | HCR_RW | HCR_TLOR | \ HCR_FMO | HCR_IMO | HCR_PTW ) #define HCR_VIRT_EXCP_MASK (HCR_VSE | HCR_VI | HCR_VF) @@ -275,24 +281,40 @@ #define CPTR_EL2_TTA (1 << 20) #define CPTR_EL2_TFP (1 << CPTR_EL2_TFP_SHIFT) #define CPTR_EL2_TZ (1 << 8) -#define CPTR_EL2_RES1 0x000032ff /* known RES1 bits in CPTR_EL2 */ -#define CPTR_EL2_DEFAULT CPTR_EL2_RES1 +#define CPTR_NVHE_EL2_RES1 0x000032ff /* known RES1 bits in CPTR_EL2 (nVHE) */ +#define CPTR_EL2_DEFAULT CPTR_NVHE_EL2_RES1 +#define CPTR_NVHE_EL2_RES0 (GENMASK(63, 32) | \ + GENMASK(29, 21) | \ + GENMASK(19, 14) | \ + BIT(11)) /* Hyp Debug Configuration Register bits */ #define MDCR_EL2_E2TB_MASK (UL(0x3)) #define MDCR_EL2_E2TB_SHIFT (UL(24)) -#define MDCR_EL2_TTRF (1 << 19) -#define MDCR_EL2_TPMS (1 << 14) +#define MDCR_EL2_HPMFZS (UL(1) << 36) +#define MDCR_EL2_HPMFZO (UL(1) << 29) +#define MDCR_EL2_MTPME (UL(1) << 28) +#define MDCR_EL2_TDCC (UL(1) << 27) +#define MDCR_EL2_HCCD (UL(1) << 23) +#define MDCR_EL2_TTRF (UL(1) << 19) +#define MDCR_EL2_HPMD (UL(1) << 17) +#define MDCR_EL2_TPMS (UL(1) << 14) #define MDCR_EL2_E2PB_MASK (UL(0x3)) #define MDCR_EL2_E2PB_SHIFT (UL(12)) -#define MDCR_EL2_TDRA (1 << 11) -#define MDCR_EL2_TDOSA (1 << 10) -#define MDCR_EL2_TDA (1 << 9) -#define MDCR_EL2_TDE (1 << 8) -#define MDCR_EL2_HPME (1 << 7) -#define MDCR_EL2_TPM (1 << 6) -#define MDCR_EL2_TPMCR (1 << 5) -#define MDCR_EL2_HPMN_MASK (0x1F) +#define MDCR_EL2_TDRA (UL(1) << 11) +#define MDCR_EL2_TDOSA (UL(1) << 10) +#define MDCR_EL2_TDA (UL(1) << 9) +#define MDCR_EL2_TDE (UL(1) << 8) +#define MDCR_EL2_HPME (UL(1) << 7) +#define MDCR_EL2_TPM (UL(1) << 6) +#define MDCR_EL2_TPMCR (UL(1) << 5) +#define MDCR_EL2_HPMN_MASK (UL(0x1F)) +#define MDCR_EL2_RES0 (GENMASK(63, 37) | \ + GENMASK(35, 30) | \ + GENMASK(25, 24) | \ + GENMASK(22, 20) | \ + BIT(18) | \ + GENMASK(16, 15)) /* For compatibility with fault code shared with 32-bit */ #define FSC_FAULT ESR_ELx_FSC_FAULT diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h index 9f0bf2109be7..e86045ac43ba 100644 --- a/arch/arm64/include/asm/kvm_asm.h +++ b/arch/arm64/include/asm/kvm_asm.h @@ -59,12 +59,11 @@ #define __KVM_HOST_SMCCC_FUNC___vgic_v3_save_aprs 13 #define __KVM_HOST_SMCCC_FUNC___vgic_v3_restore_aprs 14 #define __KVM_HOST_SMCCC_FUNC___pkvm_init 15 -#define __KVM_HOST_SMCCC_FUNC___pkvm_create_mappings 16 +#define __KVM_HOST_SMCCC_FUNC___pkvm_host_share_hyp 16 #define __KVM_HOST_SMCCC_FUNC___pkvm_create_private_mapping 17 #define __KVM_HOST_SMCCC_FUNC___pkvm_cpu_set_vector 18 #define __KVM_HOST_SMCCC_FUNC___pkvm_prot_finalize 19 -#define __KVM_HOST_SMCCC_FUNC___pkvm_mark_hyp 20 -#define __KVM_HOST_SMCCC_FUNC___kvm_adjust_pc 21 +#define __KVM_HOST_SMCCC_FUNC___kvm_adjust_pc 20 #ifndef __ASSEMBLY__ @@ -210,7 +209,7 @@ extern u64 __vgic_v3_read_vmcr(void); extern void __vgic_v3_write_vmcr(u32 vmcr); extern void __vgic_v3_init_lrs(void); -extern u32 __kvm_get_mdcr_el2(void); +extern u64 __kvm_get_mdcr_el2(void); #define __KVM_EXTABLE(from, to) \ " .pushsection __kvm_ex_table, \"a\"\n" \ diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index 41911585ae0c..f8be56d5342b 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -66,7 +66,7 @@ DECLARE_STATIC_KEY_FALSE(userspace_irqchip_in_use); extern unsigned int kvm_sve_max_vl; int kvm_arm_init_sve(void); -int __attribute_const__ kvm_target_cpu(void); +u32 __attribute_const__ kvm_target_cpu(void); int kvm_reset_vcpu(struct kvm_vcpu *vcpu); void kvm_arm_vcpu_destroy(struct kvm_vcpu *vcpu); @@ -185,7 +185,6 @@ enum vcpu_sysreg { PMCNTENSET_EL0, /* Count Enable Set Register */ PMINTENSET_EL1, /* Interrupt Enable Set Register */ PMOVSSET_EL0, /* Overflow Flag Status Set Register */ - PMSWINC_EL0, /* Software Increment Register */ PMUSERENR_EL0, /* User Enable Register */ /* Pointer Authentication Registers in a strict increasing order. */ @@ -287,9 +286,13 @@ struct kvm_vcpu_arch { /* Stage 2 paging state used by the hardware on next switch */ struct kvm_s2_mmu *hw_mmu; - /* HYP configuration */ + /* Values of trap registers for the guest. */ u64 hcr_el2; - u32 mdcr_el2; + u64 mdcr_el2; + u64 cptr_el2; + + /* Values of trap registers for the host before guest entry. */ + u64 mdcr_el2_host; /* Exception Information */ struct kvm_vcpu_fault_info fault; @@ -576,6 +579,7 @@ struct kvm_vcpu_stat { u64 wfi_exit_stat; u64 mmio_exit_user; u64 mmio_exit_kernel; + u64 signal_exits; u64 exits; }; @@ -771,6 +775,11 @@ void kvm_arch_free_vm(struct kvm *kvm); int kvm_arm_setup_stage2(struct kvm *kvm, unsigned long type); +static inline bool kvm_vm_is_protected(struct kvm *kvm) +{ + return false; +} + int kvm_arm_vcpu_finalize(struct kvm_vcpu *vcpu, int feature); bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu); diff --git a/arch/arm64/include/asm/kvm_hyp.h b/arch/arm64/include/asm/kvm_hyp.h index 9d60b3006efc..657d0c94cf82 100644 --- a/arch/arm64/include/asm/kvm_hyp.h +++ b/arch/arm64/include/asm/kvm_hyp.h @@ -95,7 +95,7 @@ void __sve_restore_state(void *sve_pffr, u32 *fpsr); #ifndef __KVM_NVHE_HYPERVISOR__ void activate_traps_vhe_load(struct kvm_vcpu *vcpu); -void deactivate_traps_vhe_put(void); +void deactivate_traps_vhe_put(struct kvm_vcpu *vcpu); #endif u64 __guest_enter(struct kvm_vcpu *vcpu); diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h index b52c5c4b9a3d..02d378887743 100644 --- a/arch/arm64/include/asm/kvm_mmu.h +++ b/arch/arm64/include/asm/kvm_mmu.h @@ -252,6 +252,11 @@ static inline int kvm_write_guest_lock(struct kvm *kvm, gpa_t gpa, #define kvm_phys_to_vttbr(addr) phys_to_ttbr(addr) +/* + * When this is (directly or indirectly) used on the TLB invalidation + * path, we rely on a previously issued DSB so that page table updates + * and VMID reads are correctly ordered. + */ static __always_inline u64 kvm_get_vttbr(struct kvm_s2_mmu *mmu) { struct kvm_vmid *vmid = &mmu->vmid; @@ -259,7 +264,7 @@ static __always_inline u64 kvm_get_vttbr(struct kvm_s2_mmu *mmu) u64 cnp = system_supports_cnp() ? VTTBR_CNP_BIT : 0; baddr = mmu->pgd_phys; - vmid_field = (u64)vmid->vmid << VTTBR_VMID_SHIFT; + vmid_field = (u64)READ_ONCE(vmid->vmid) << VTTBR_VMID_SHIFT; return kvm_phys_to_vttbr(baddr) | vmid_field | cnp; } @@ -267,9 +272,10 @@ static __always_inline u64 kvm_get_vttbr(struct kvm_s2_mmu *mmu) * Must be called from hyp code running at EL2 with an updated VTTBR * and interrupts disabled. */ -static __always_inline void __load_stage2(struct kvm_s2_mmu *mmu, unsigned long vtcr) +static __always_inline void __load_stage2(struct kvm_s2_mmu *mmu, + struct kvm_arch *arch) { - write_sysreg(vtcr, vtcr_el2); + write_sysreg(arch->vtcr, vtcr_el2); write_sysreg(kvm_get_vttbr(mmu), vttbr_el2); /* @@ -280,11 +286,6 @@ static __always_inline void __load_stage2(struct kvm_s2_mmu *mmu, unsigned long asm(ALTERNATIVE("nop", "isb", ARM64_WORKAROUND_SPECULATIVE_AT)); } -static __always_inline void __load_guest_stage2(struct kvm_s2_mmu *mmu) -{ - __load_stage2(mmu, kern_hyp_va(mmu->arch)->vtcr); -} - static inline struct kvm *kvm_s2_mmu_to_kvm(struct kvm_s2_mmu *mmu) { return container_of(mmu->arch, struct kvm, arch); diff --git a/arch/arm64/include/asm/kvm_pgtable.h b/arch/arm64/include/asm/kvm_pgtable.h index f004c0115d89..027783829584 100644 --- a/arch/arm64/include/asm/kvm_pgtable.h +++ b/arch/arm64/include/asm/kvm_pgtable.h @@ -25,6 +25,46 @@ static inline u64 kvm_get_parange(u64 mmfr0) typedef u64 kvm_pte_t; +#define KVM_PTE_VALID BIT(0) + +#define KVM_PTE_ADDR_MASK GENMASK(47, PAGE_SHIFT) +#define KVM_PTE_ADDR_51_48 GENMASK(15, 12) + +static inline bool kvm_pte_valid(kvm_pte_t pte) +{ + return pte & KVM_PTE_VALID; +} + +static inline u64 kvm_pte_to_phys(kvm_pte_t pte) +{ + u64 pa = pte & KVM_PTE_ADDR_MASK; + + if (PAGE_SHIFT == 16) + pa |= FIELD_GET(KVM_PTE_ADDR_51_48, pte) << 48; + + return pa; +} + +static inline u64 kvm_granule_shift(u32 level) +{ + /* Assumes KVM_PGTABLE_MAX_LEVELS is 4 */ + return ARM64_HW_PGTABLE_LEVEL_SHIFT(level); +} + +static inline u64 kvm_granule_size(u32 level) +{ + return BIT(kvm_granule_shift(level)); +} + +static inline bool kvm_level_supports_block_mapping(u32 level) +{ + /* + * Reject invalid block mappings and don't bother with 4TB mappings for + * 52-bit PAs. + */ + return !(level == 0 || (PAGE_SIZE != SZ_4K && level == 1)); +} + /** * struct kvm_pgtable_mm_ops - Memory management callbacks. * @zalloc_page: Allocate a single zeroed memory page. @@ -76,30 +116,15 @@ enum kvm_pgtable_stage2_flags { }; /** - * struct kvm_pgtable - KVM page-table. - * @ia_bits: Maximum input address size, in bits. - * @start_level: Level at which the page-table walk starts. - * @pgd: Pointer to the first top-level entry of the page-table. - * @mm_ops: Memory management callbacks. - * @mmu: Stage-2 KVM MMU struct. Unused for stage-1 page-tables. - */ -struct kvm_pgtable { - u32 ia_bits; - u32 start_level; - kvm_pte_t *pgd; - struct kvm_pgtable_mm_ops *mm_ops; - - /* Stage-2 only */ - struct kvm_s2_mmu *mmu; - enum kvm_pgtable_stage2_flags flags; -}; - -/** * enum kvm_pgtable_prot - Page-table permissions and attributes. * @KVM_PGTABLE_PROT_X: Execute permission. * @KVM_PGTABLE_PROT_W: Write permission. * @KVM_PGTABLE_PROT_R: Read permission. * @KVM_PGTABLE_PROT_DEVICE: Device attributes. + * @KVM_PGTABLE_PROT_SW0: Software bit 0. + * @KVM_PGTABLE_PROT_SW1: Software bit 1. + * @KVM_PGTABLE_PROT_SW2: Software bit 2. + * @KVM_PGTABLE_PROT_SW3: Software bit 3. */ enum kvm_pgtable_prot { KVM_PGTABLE_PROT_X = BIT(0), @@ -107,21 +132,48 @@ enum kvm_pgtable_prot { KVM_PGTABLE_PROT_R = BIT(2), KVM_PGTABLE_PROT_DEVICE = BIT(3), + + KVM_PGTABLE_PROT_SW0 = BIT(55), + KVM_PGTABLE_PROT_SW1 = BIT(56), + KVM_PGTABLE_PROT_SW2 = BIT(57), + KVM_PGTABLE_PROT_SW3 = BIT(58), }; -#define PAGE_HYP (KVM_PGTABLE_PROT_R | KVM_PGTABLE_PROT_W) +#define KVM_PGTABLE_PROT_RW (KVM_PGTABLE_PROT_R | KVM_PGTABLE_PROT_W) +#define KVM_PGTABLE_PROT_RWX (KVM_PGTABLE_PROT_RW | KVM_PGTABLE_PROT_X) + +#define PKVM_HOST_MEM_PROT KVM_PGTABLE_PROT_RWX +#define PKVM_HOST_MMIO_PROT KVM_PGTABLE_PROT_RW + +#define PAGE_HYP KVM_PGTABLE_PROT_RW #define PAGE_HYP_EXEC (KVM_PGTABLE_PROT_R | KVM_PGTABLE_PROT_X) #define PAGE_HYP_RO (KVM_PGTABLE_PROT_R) #define PAGE_HYP_DEVICE (PAGE_HYP | KVM_PGTABLE_PROT_DEVICE) +typedef bool (*kvm_pgtable_force_pte_cb_t)(u64 addr, u64 end, + enum kvm_pgtable_prot prot); + /** - * struct kvm_mem_range - Range of Intermediate Physical Addresses - * @start: Start of the range. - * @end: End of the range. + * struct kvm_pgtable - KVM page-table. + * @ia_bits: Maximum input address size, in bits. + * @start_level: Level at which the page-table walk starts. + * @pgd: Pointer to the first top-level entry of the page-table. + * @mm_ops: Memory management callbacks. + * @mmu: Stage-2 KVM MMU struct. Unused for stage-1 page-tables. + * @flags: Stage-2 page-table flags. + * @force_pte_cb: Function that returns true if page level mappings must + * be used instead of block mappings. */ -struct kvm_mem_range { - u64 start; - u64 end; +struct kvm_pgtable { + u32 ia_bits; + u32 start_level; + kvm_pte_t *pgd; + struct kvm_pgtable_mm_ops *mm_ops; + + /* Stage-2 only */ + struct kvm_s2_mmu *mmu; + enum kvm_pgtable_stage2_flags flags; + kvm_pgtable_force_pte_cb_t force_pte_cb; }; /** @@ -216,21 +268,24 @@ int kvm_pgtable_hyp_map(struct kvm_pgtable *pgt, u64 addr, u64 size, u64 phys, u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift); /** - * kvm_pgtable_stage2_init_flags() - Initialise a guest stage-2 page-table. + * __kvm_pgtable_stage2_init() - Initialise a guest stage-2 page-table. * @pgt: Uninitialised page-table structure to initialise. * @arch: Arch-specific KVM structure representing the guest virtual * machine. * @mm_ops: Memory management callbacks. * @flags: Stage-2 configuration flags. + * @force_pte_cb: Function that returns true if page level mappings must + * be used instead of block mappings. * * Return: 0 on success, negative error code on failure. */ -int kvm_pgtable_stage2_init_flags(struct kvm_pgtable *pgt, struct kvm_arch *arch, - struct kvm_pgtable_mm_ops *mm_ops, - enum kvm_pgtable_stage2_flags flags); +int __kvm_pgtable_stage2_init(struct kvm_pgtable *pgt, struct kvm_arch *arch, + struct kvm_pgtable_mm_ops *mm_ops, + enum kvm_pgtable_stage2_flags flags, + kvm_pgtable_force_pte_cb_t force_pte_cb); #define kvm_pgtable_stage2_init(pgt, arch, mm_ops) \ - kvm_pgtable_stage2_init_flags(pgt, arch, mm_ops, 0) + __kvm_pgtable_stage2_init(pgt, arch, mm_ops, 0, NULL) /** * kvm_pgtable_stage2_destroy() - Destroy an unused guest stage-2 page-table. @@ -374,7 +429,8 @@ kvm_pte_t kvm_pgtable_stage2_mkold(struct kvm_pgtable *pgt, u64 addr); * If there is a valid, leaf page-table entry used to translate @addr, then * relax the permissions in that entry according to the read, write and * execute permissions specified by @prot. No permissions are removed, and - * TLB invalidation is performed after updating the entry. + * TLB invalidation is performed after updating the entry. Software bits cannot + * be set or cleared using kvm_pgtable_stage2_relax_perms(). * * Return: 0 on success, negative error code on failure. */ @@ -433,22 +489,42 @@ int kvm_pgtable_walk(struct kvm_pgtable *pgt, u64 addr, u64 size, struct kvm_pgtable_walker *walker); /** - * kvm_pgtable_stage2_find_range() - Find a range of Intermediate Physical - * Addresses with compatible permission - * attributes. - * @pgt: Page-table structure initialised by kvm_pgtable_stage2_init*(). - * @addr: Address that must be covered by the range. - * @prot: Protection attributes that the range must be compatible with. - * @range: Range structure used to limit the search space at call time and - * that will hold the result. + * kvm_pgtable_get_leaf() - Walk a page-table and retrieve the leaf entry + * with its level. + * @pgt: Page-table structure initialised by kvm_pgtable_*_init() + * or a similar initialiser. + * @addr: Input address for the start of the walk. + * @ptep: Pointer to storage for the retrieved PTE. + * @level: Pointer to storage for the level of the retrieved PTE. + * + * The offset of @addr within a page is ignored. * - * The offset of @addr within a page is ignored. An IPA is compatible with @prot - * iff its corresponding stage-2 page-table entry has default ownership and, if - * valid, is mapped with protection attributes identical to @prot. + * The walker will walk the page-table entries corresponding to the input + * address specified, retrieving the leaf corresponding to this address. + * Invalid entries are treated as leaf entries. * * Return: 0 on success, negative error code on failure. */ -int kvm_pgtable_stage2_find_range(struct kvm_pgtable *pgt, u64 addr, - enum kvm_pgtable_prot prot, - struct kvm_mem_range *range); +int kvm_pgtable_get_leaf(struct kvm_pgtable *pgt, u64 addr, + kvm_pte_t *ptep, u32 *level); + +/** + * kvm_pgtable_stage2_pte_prot() - Retrieve the protection attributes of a + * stage-2 Page-Table Entry. + * @pte: Page-table entry + * + * Return: protection attributes of the page-table entry in the enum + * kvm_pgtable_prot format. + */ +enum kvm_pgtable_prot kvm_pgtable_stage2_pte_prot(kvm_pte_t pte); + +/** + * kvm_pgtable_hyp_pte_prot() - Retrieve the protection attributes of a stage-1 + * Page-Table Entry. + * @pte: Page-table entry + * + * Return: protection attributes of the page-table entry in the enum + * kvm_pgtable_prot format. + */ +enum kvm_pgtable_prot kvm_pgtable_hyp_pte_prot(kvm_pte_t pte); #endif /* __ARM64_KVM_PGTABLE_H__ */ diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h index 824a3655dd93..f1745a843414 100644 --- a/arch/arm64/include/asm/memory.h +++ b/arch/arm64/include/asm/memory.h @@ -243,9 +243,7 @@ static inline const void *__tag_set(const void *addr, u8 tag) #ifdef CONFIG_KASAN_HW_TAGS #define arch_enable_tagging_sync() mte_enable_kernel_sync() #define arch_enable_tagging_async() mte_enable_kernel_async() -#define arch_set_tagging_report_once(state) mte_set_report_once(state) #define arch_force_async_tag_fault() mte_check_tfsr_exit() -#define arch_init_tags(max_tag) mte_init_tags(max_tag) #define arch_get_random_tag() mte_get_random_tag() #define arch_get_mem_tag(addr) mte_get_mem_tag(addr) #define arch_set_mem_tag_range(addr, size, tag, init) \ diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h index 75beffe2ee8a..e9c30859f80c 100644 --- a/arch/arm64/include/asm/mmu.h +++ b/arch/arm64/include/asm/mmu.h @@ -27,11 +27,32 @@ typedef struct { } mm_context_t; /* - * This macro is only used by the TLBI and low-level switch_mm() code, - * neither of which can race with an ASID change. We therefore don't - * need to reload the counter using atomic64_read(). + * We use atomic64_read() here because the ASID for an 'mm_struct' can + * be reallocated when scheduling one of its threads following a + * rollover event (see new_context() and flush_context()). In this case, + * a concurrent TLBI (e.g. via try_to_unmap_one() and ptep_clear_flush()) + * may use a stale ASID. This is fine in principle as the new ASID is + * guaranteed to be clean in the TLB, but the TLBI routines have to take + * care to handle the following race: + * + * CPU 0 CPU 1 CPU 2 + * + * // ptep_clear_flush(mm) + * xchg_relaxed(pte, 0) + * DSB ISHST + * old = ASID(mm) + * | <rollover> + * | new = new_context(mm) + * \-----------------> atomic_set(mm->context.id, new) + * cpu_switch_mm(mm) + * // Hardware walk of pte using new ASID + * TLBI(old) + * + * In this scenario, the barrier on CPU 0 and the dependency on CPU 1 + * ensure that the page-table walker on CPU 1 *must* see the invalid PTE + * written by CPU 0. */ -#define ASID(mm) ((mm)->context.id.counter & 0xffff) +#define ASID(mm) (atomic64_read(&(mm)->context.id) & 0xffff) static inline bool arm64_kernel_unmapped_at_el0(void) { diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h index eeb210997149..f4ba93d4ffeb 100644 --- a/arch/arm64/include/asm/mmu_context.h +++ b/arch/arm64/include/asm/mmu_context.h @@ -231,6 +231,19 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next, update_saved_ttbr0(tsk, next); } +static inline const struct cpumask * +task_cpu_possible_mask(struct task_struct *p) +{ + if (!static_branch_unlikely(&arm64_mismatched_32bit_el0)) + return cpu_possible_mask; + + if (!is_compat_thread(task_thread_info(p))) + return cpu_possible_mask; + + return system_32bit_el0_cpumask(); +} +#define task_cpu_possible_mask task_cpu_possible_mask + void verify_cpu_asid_bits(void); void post_ttbr_update_workaround(void); diff --git a/arch/arm64/include/asm/mshyperv.h b/arch/arm64/include/asm/mshyperv.h new file mode 100644 index 000000000000..20070a847304 --- /dev/null +++ b/arch/arm64/include/asm/mshyperv.h @@ -0,0 +1,54 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* + * Linux-specific definitions for managing interactions with Microsoft's + * Hyper-V hypervisor. The definitions in this file are specific to + * the ARM64 architecture. See include/asm-generic/mshyperv.h for + * definitions are that architecture independent. + * + * Definitions that are specified in the Hyper-V Top Level Functional + * Spec (TLFS) should not go in this file, but should instead go in + * hyperv-tlfs.h. + * + * Copyright (C) 2021, Microsoft, Inc. + * + * Author : Michael Kelley <mikelley@microsoft.com> + */ + +#ifndef _ASM_MSHYPERV_H +#define _ASM_MSHYPERV_H + +#include <linux/types.h> +#include <linux/arm-smccc.h> +#include <asm/hyperv-tlfs.h> + +/* + * Declare calls to get and set Hyper-V VP register values on ARM64, which + * requires a hypercall. + */ + +void hv_set_vpreg(u32 reg, u64 value); +u64 hv_get_vpreg(u32 reg); +void hv_get_vpreg_128(u32 reg, struct hv_get_vp_registers_output *result); + +static inline void hv_set_register(unsigned int reg, u64 value) +{ + hv_set_vpreg(reg, value); +} + +static inline u64 hv_get_register(unsigned int reg) +{ + return hv_get_vpreg(reg); +} + +/* SMCCC hypercall parameters */ +#define HV_SMCCC_FUNC_NUMBER 1 +#define HV_FUNC_ID ARM_SMCCC_CALL_VAL( \ + ARM_SMCCC_STD_CALL, \ + ARM_SMCCC_SMC_64, \ + ARM_SMCCC_OWNER_VENDOR_HYP, \ + HV_SMCCC_FUNC_NUMBER) + +#include <asm-generic/mshyperv.h> + +#endif diff --git a/arch/arm64/include/asm/mte-kasan.h b/arch/arm64/include/asm/mte-kasan.h index d952352bd008..22420e1f8c03 100644 --- a/arch/arm64/include/asm/mte-kasan.h +++ b/arch/arm64/include/asm/mte-kasan.h @@ -130,10 +130,6 @@ static inline void mte_set_mem_tag_range(void *addr, size_t size, u8 tag, void mte_enable_kernel_sync(void); void mte_enable_kernel_async(void); -void mte_init_tags(u64 max_tag); - -void mte_set_report_once(bool state); -bool mte_report_once(void); #else /* CONFIG_ARM64_MTE */ @@ -165,19 +161,6 @@ static inline void mte_enable_kernel_async(void) { } -static inline void mte_init_tags(u64 max_tag) -{ -} - -static inline void mte_set_report_once(bool state) -{ -} - -static inline bool mte_report_once(void) -{ - return false; -} - #endif /* CONFIG_ARM64_MTE */ #endif /* __ASSEMBLY__ */ diff --git a/arch/arm64/include/asm/mte.h b/arch/arm64/include/asm/mte.h index 58c7f80f5596..3f93b9e0b339 100644 --- a/arch/arm64/include/asm/mte.h +++ b/arch/arm64/include/asm/mte.h @@ -16,8 +16,6 @@ #include <asm/pgtable-types.h> -extern u64 gcr_kernel_excl; - void mte_clear_page_tags(void *addr); unsigned long mte_copy_tags_from_user(void *to, const void __user *from, unsigned long n); @@ -43,7 +41,6 @@ void mte_copy_page_tags(void *kto, const void *kfrom); void mte_thread_init_user(void); void mte_thread_switch(struct task_struct *next); void mte_suspend_enter(void); -void mte_suspend_exit(void); long set_mte_ctrl(struct task_struct *task, unsigned long arg); long get_mte_ctrl(struct task_struct *task); int mte_ptrace_copy_tags(struct task_struct *child, long request, @@ -72,9 +69,6 @@ static inline void mte_thread_switch(struct task_struct *next) static inline void mte_suspend_enter(void) { } -static inline void mte_suspend_exit(void) -{ -} static inline long set_mte_ctrl(struct task_struct *task, unsigned long arg) { return 0; diff --git a/arch/arm64/include/asm/page.h b/arch/arm64/include/asm/page.h index 993a27ea6f54..f98c91bbd7c1 100644 --- a/arch/arm64/include/asm/page.h +++ b/arch/arm64/include/asm/page.h @@ -41,6 +41,7 @@ void tag_clear_highpage(struct page *to); typedef struct page *pgtable_t; +int pfn_valid(unsigned long pfn); int pfn_is_map_memory(unsigned long pfn); #include <asm/memory.h> diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index f09bf5c02891..dfa76afa0ccf 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -715,7 +715,7 @@ static inline pud_t *p4d_pgtable(p4d_t p4d) return (pud_t *)__va(p4d_page_paddr(p4d)); } -/* Find an entry in the frst-level page table. */ +/* Find an entry in the first-level page table. */ #define pud_offset_phys(dir, addr) (p4d_page_paddr(READ_ONCE(*(dir))) + pud_index(addr) * sizeof(pud_t)) #define pud_set_fixmap(addr) ((pud_t *)set_fixmap_offset(FIX_PUD, addr)) diff --git a/arch/arm64/include/asm/pointer_auth.h b/arch/arm64/include/asm/pointer_auth.h index 28a78b67d9b4..efb098de3a84 100644 --- a/arch/arm64/include/asm/pointer_auth.h +++ b/arch/arm64/include/asm/pointer_auth.h @@ -10,6 +10,9 @@ #include <asm/memory.h> #include <asm/sysreg.h> +#define PR_PAC_ENABLED_KEYS_MASK \ + (PR_PAC_APIAKEY | PR_PAC_APIBKEY | PR_PAC_APDAKEY | PR_PAC_APDBKEY) + #ifdef CONFIG_ARM64_PTR_AUTH /* * Each key is a 128-bit quantity which is split across a pair of 64-bit @@ -117,9 +120,9 @@ static __always_inline void ptrauth_enable(void) \ /* enable all keys */ \ if (system_supports_address_auth()) \ - set_task_sctlr_el1(current->thread.sctlr_user | \ - SCTLR_ELx_ENIA | SCTLR_ELx_ENIB | \ - SCTLR_ELx_ENDA | SCTLR_ELx_ENDB); \ + ptrauth_set_enabled_keys(current, \ + PR_PAC_ENABLED_KEYS_MASK, \ + PR_PAC_ENABLED_KEYS_MASK); \ } while (0) #define ptrauth_thread_switch_user(tsk) \ @@ -146,7 +149,4 @@ static __always_inline void ptrauth_enable(void) #define ptrauth_thread_switch_kernel(tsk) #endif /* CONFIG_ARM64_PTR_AUTH_KERNEL */ -#define PR_PAC_ENABLED_KEYS_MASK \ - (PR_PAC_APIAKEY | PR_PAC_APIBKEY | PR_PAC_APDAKEY | PR_PAC_APDBKEY) - #endif /* __ASM_POINTER_AUTH_H */ diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index b6517fd03d7b..ee2bdc1b9f5b 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -16,6 +16,12 @@ */ #define NET_IP_ALIGN 0 +#define MTE_CTRL_GCR_USER_EXCL_SHIFT 0 +#define MTE_CTRL_GCR_USER_EXCL_MASK 0xffff + +#define MTE_CTRL_TCF_SYNC (1UL << 16) +#define MTE_CTRL_TCF_ASYNC (1UL << 17) + #ifndef __ASSEMBLY__ #include <linux/build_bug.h> @@ -153,7 +159,7 @@ struct thread_struct { #endif #endif #ifdef CONFIG_ARM64_MTE - u64 gcr_user_excl; + u64 mte_ctrl; #endif u64 sctlr_user; }; @@ -253,7 +259,7 @@ extern void release_thread(struct task_struct *); unsigned long get_wchan(struct task_struct *p); -void set_task_sctlr_el1(u64 sctlr); +void update_sctlr_el1(u64 sctlr); /* Thread switching */ extern struct task_struct *cpu_switch_to(struct task_struct *prev, diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h index e58bca832dff..41b332c054ab 100644 --- a/arch/arm64/include/asm/ptrace.h +++ b/arch/arm64/include/asm/ptrace.h @@ -320,7 +320,17 @@ static inline unsigned long kernel_stack_pointer(struct pt_regs *regs) static inline unsigned long regs_return_value(struct pt_regs *regs) { - return regs->regs[0]; + unsigned long val = regs->regs[0]; + + /* + * Audit currently uses regs_return_value() instead of + * syscall_get_return_value(). Apply the same sign-extension here until + * audit is updated to use syscall_get_return_value(). + */ + if (compat_user_mode(regs)) + val = sign_extend64(val, 31); + + return val; } static inline void regs_set_return_value(struct pt_regs *regs, unsigned long rc) diff --git a/arch/arm64/include/asm/simd.h b/arch/arm64/include/asm/simd.h index 89cba2622b79..6a75d7ecdcaa 100644 --- a/arch/arm64/include/asm/simd.h +++ b/arch/arm64/include/asm/simd.h @@ -37,7 +37,7 @@ static __must_check inline bool may_use_simd(void) */ return !WARN_ON(!system_capabilities_finalized()) && system_supports_fpsimd() && - !in_irq() && !irqs_disabled() && !in_nmi() && + !in_hardirq() && !irqs_disabled() && !in_nmi() && !this_cpu_read(fpsimd_context_busy); } diff --git a/arch/arm64/include/asm/smp_plat.h b/arch/arm64/include/asm/smp_plat.h index 99ad77df8f52..97ddc6c203b7 100644 --- a/arch/arm64/include/asm/smp_plat.h +++ b/arch/arm64/include/asm/smp_plat.h @@ -10,6 +10,7 @@ #include <linux/cpumask.h> +#include <asm/smp.h> #include <asm/types.h> struct mpidr_hash { diff --git a/arch/arm64/include/asm/stacktrace.h b/arch/arm64/include/asm/stacktrace.h index 1801399204d7..8aebc00c1718 100644 --- a/arch/arm64/include/asm/stacktrace.h +++ b/arch/arm64/include/asm/stacktrace.h @@ -35,7 +35,7 @@ struct stack_info { * accounting information necessary for robust unwinding. * * @fp: The fp value in the frame record (or the real fp) - * @pc: The fp value in the frame record (or the real lr) + * @pc: The lr value in the frame record (or the real lr) * * @stacks_done: Stacks which have been entirely unwound, for which it is no * longer valid to unwind to. diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h index cfc0672013f6..03e20895453a 100644 --- a/arch/arm64/include/asm/syscall.h +++ b/arch/arm64/include/asm/syscall.h @@ -29,22 +29,23 @@ static inline void syscall_rollback(struct task_struct *task, regs->regs[0] = regs->orig_x0; } - -static inline long syscall_get_error(struct task_struct *task, - struct pt_regs *regs) +static inline long syscall_get_return_value(struct task_struct *task, + struct pt_regs *regs) { - unsigned long error = regs->regs[0]; + unsigned long val = regs->regs[0]; if (is_compat_thread(task_thread_info(task))) - error = sign_extend64(error, 31); + val = sign_extend64(val, 31); - return IS_ERR_VALUE(error) ? error : 0; + return val; } -static inline long syscall_get_return_value(struct task_struct *task, - struct pt_regs *regs) +static inline long syscall_get_error(struct task_struct *task, + struct pt_regs *regs) { - return regs->regs[0]; + unsigned long error = syscall_get_return_value(task, regs); + + return IS_ERR_VALUE(error) ? error : 0; } static inline void syscall_set_return_value(struct task_struct *task, diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index 7b9c3acba684..b268082d67ed 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -11,6 +11,7 @@ #include <linux/bits.h> #include <linux/stringify.h> +#include <linux/kasan-tags.h> /* * ARMv8 ARM reserves the following encoding for system registers: @@ -698,8 +699,7 @@ (SCTLR_ELx_M | SCTLR_ELx_C | SCTLR_ELx_SA | SCTLR_EL1_SA0 | \ SCTLR_EL1_SED | SCTLR_ELx_I | SCTLR_EL1_DZE | SCTLR_EL1_UCT | \ SCTLR_EL1_NTWE | SCTLR_ELx_IESB | SCTLR_EL1_SPAN | SCTLR_ELx_ITFSB | \ - SCTLR_ELx_ATA | SCTLR_EL1_ATA0 | ENDIAN_SET_EL1 | SCTLR_EL1_UCI | \ - SCTLR_EL1_EPAN | SCTLR_EL1_RES1) + ENDIAN_SET_EL1 | SCTLR_EL1_UCI | SCTLR_EL1_EPAN | SCTLR_EL1_RES1) /* MAIR_ELx memory attributes (used by Linux) */ #define MAIR_ATTR_DEVICE_nGnRnE UL(0x00) @@ -784,14 +784,13 @@ #define ID_AA64PFR0_AMU 0x1 #define ID_AA64PFR0_SVE 0x1 #define ID_AA64PFR0_RAS_V1 0x1 +#define ID_AA64PFR0_RAS_V1P1 0x2 #define ID_AA64PFR0_FP_NI 0xf #define ID_AA64PFR0_FP_SUPPORTED 0x0 #define ID_AA64PFR0_ASIMD_NI 0xf #define ID_AA64PFR0_ASIMD_SUPPORTED 0x0 -#define ID_AA64PFR0_EL1_64BIT_ONLY 0x1 -#define ID_AA64PFR0_EL1_32BIT_64BIT 0x2 -#define ID_AA64PFR0_EL0_64BIT_ONLY 0x1 -#define ID_AA64PFR0_EL0_32BIT_64BIT 0x2 +#define ID_AA64PFR0_ELx_64BIT_ONLY 0x1 +#define ID_AA64PFR0_ELx_32BIT_64BIT 0x2 /* id_aa64pfr1 */ #define ID_AA64PFR1_MPAMFRAC_SHIFT 16 @@ -847,15 +846,29 @@ #define ID_AA64MMFR0_ASID_SHIFT 4 #define ID_AA64MMFR0_PARANGE_SHIFT 0 -#define ID_AA64MMFR0_TGRAN4_NI 0xf -#define ID_AA64MMFR0_TGRAN4_SUPPORTED 0x0 -#define ID_AA64MMFR0_TGRAN64_NI 0xf -#define ID_AA64MMFR0_TGRAN64_SUPPORTED 0x0 -#define ID_AA64MMFR0_TGRAN16_NI 0x0 -#define ID_AA64MMFR0_TGRAN16_SUPPORTED 0x1 +#define ID_AA64MMFR0_ASID_8 0x0 +#define ID_AA64MMFR0_ASID_16 0x2 + +#define ID_AA64MMFR0_TGRAN4_NI 0xf +#define ID_AA64MMFR0_TGRAN4_SUPPORTED_MIN 0x0 +#define ID_AA64MMFR0_TGRAN4_SUPPORTED_MAX 0x7 +#define ID_AA64MMFR0_TGRAN64_NI 0xf +#define ID_AA64MMFR0_TGRAN64_SUPPORTED_MIN 0x0 +#define ID_AA64MMFR0_TGRAN64_SUPPORTED_MAX 0x7 +#define ID_AA64MMFR0_TGRAN16_NI 0x0 +#define ID_AA64MMFR0_TGRAN16_SUPPORTED_MIN 0x1 +#define ID_AA64MMFR0_TGRAN16_SUPPORTED_MAX 0xf + +#define ID_AA64MMFR0_PARANGE_32 0x0 +#define ID_AA64MMFR0_PARANGE_36 0x1 +#define ID_AA64MMFR0_PARANGE_40 0x2 +#define ID_AA64MMFR0_PARANGE_42 0x3 +#define ID_AA64MMFR0_PARANGE_44 0x4 #define ID_AA64MMFR0_PARANGE_48 0x5 #define ID_AA64MMFR0_PARANGE_52 0x6 +#define ARM64_MIN_PARANGE_BITS 32 + #define ID_AA64MMFR0_TGRAN_2_SUPPORTED_DEFAULT 0x0 #define ID_AA64MMFR0_TGRAN_2_SUPPORTED_NONE 0x1 #define ID_AA64MMFR0_TGRAN_2_SUPPORTED_MIN 0x2 @@ -900,6 +913,7 @@ #define ID_AA64MMFR2_CNP_SHIFT 0 /* id_aa64dfr0 */ +#define ID_AA64DFR0_MTPMU_SHIFT 48 #define ID_AA64DFR0_TRBE_SHIFT 44 #define ID_AA64DFR0_TRACE_FILT_SHIFT 40 #define ID_AA64DFR0_DOUBLELOCK_SHIFT 36 @@ -1028,16 +1042,19 @@ #if defined(CONFIG_ARM64_4K_PAGES) #define ID_AA64MMFR0_TGRAN_SHIFT ID_AA64MMFR0_TGRAN4_SHIFT -#define ID_AA64MMFR0_TGRAN_SUPPORTED_MIN ID_AA64MMFR0_TGRAN4_SUPPORTED -#define ID_AA64MMFR0_TGRAN_SUPPORTED_MAX 0x7 +#define ID_AA64MMFR0_TGRAN_SUPPORTED_MIN ID_AA64MMFR0_TGRAN4_SUPPORTED_MIN +#define ID_AA64MMFR0_TGRAN_SUPPORTED_MAX ID_AA64MMFR0_TGRAN4_SUPPORTED_MAX +#define ID_AA64MMFR0_TGRAN_2_SHIFT ID_AA64MMFR0_TGRAN4_2_SHIFT #elif defined(CONFIG_ARM64_16K_PAGES) #define ID_AA64MMFR0_TGRAN_SHIFT ID_AA64MMFR0_TGRAN16_SHIFT -#define ID_AA64MMFR0_TGRAN_SUPPORTED_MIN ID_AA64MMFR0_TGRAN16_SUPPORTED -#define ID_AA64MMFR0_TGRAN_SUPPORTED_MAX 0xF +#define ID_AA64MMFR0_TGRAN_SUPPORTED_MIN ID_AA64MMFR0_TGRAN16_SUPPORTED_MIN +#define ID_AA64MMFR0_TGRAN_SUPPORTED_MAX ID_AA64MMFR0_TGRAN16_SUPPORTED_MAX +#define ID_AA64MMFR0_TGRAN_2_SHIFT ID_AA64MMFR0_TGRAN16_2_SHIFT #elif defined(CONFIG_ARM64_64K_PAGES) #define ID_AA64MMFR0_TGRAN_SHIFT ID_AA64MMFR0_TGRAN64_SHIFT -#define ID_AA64MMFR0_TGRAN_SUPPORTED_MIN ID_AA64MMFR0_TGRAN64_SUPPORTED -#define ID_AA64MMFR0_TGRAN_SUPPORTED_MAX 0x7 +#define ID_AA64MMFR0_TGRAN_SUPPORTED_MIN ID_AA64MMFR0_TGRAN64_SUPPORTED_MIN +#define ID_AA64MMFR0_TGRAN_SUPPORTED_MAX ID_AA64MMFR0_TGRAN64_SUPPORTED_MAX +#define ID_AA64MMFR0_TGRAN_2_SHIFT ID_AA64MMFR0_TGRAN64_2_SHIFT #endif #define MVFR2_FPMISC_SHIFT 4 @@ -1067,6 +1084,21 @@ #define SYS_GCR_EL1_RRND (BIT(16)) #define SYS_GCR_EL1_EXCL_MASK 0xffffUL +#ifdef CONFIG_KASAN_HW_TAGS +/* + * KASAN always uses a whole byte for its tags. With CONFIG_KASAN_HW_TAGS it + * only uses tags in the range 0xF0-0xFF, which we map to MTE tags 0x0-0xF. + */ +#define __MTE_TAG_MIN (KASAN_TAG_MIN & 0xf) +#define __MTE_TAG_MAX (KASAN_TAG_MAX & 0xf) +#define __MTE_TAG_INCL GENMASK(__MTE_TAG_MAX, __MTE_TAG_MIN) +#define KERNEL_GCR_EL1_EXCL (SYS_GCR_EL1_EXCL_MASK & ~__MTE_TAG_INCL) +#else +#define KERNEL_GCR_EL1_EXCL SYS_GCR_EL1_EXCL_MASK +#endif + +#define KERNEL_GCR_EL1 (SYS_GCR_EL1_RRND | KERNEL_GCR_EL1_EXCL) + /* RGSR_EL1 Definitions */ #define SYS_RGSR_EL1_TAG_MASK 0xfUL #define SYS_RGSR_EL1_SEED_SHIFT 8 @@ -1153,6 +1185,11 @@ #define ICH_VTR_A3V_SHIFT 21 #define ICH_VTR_A3V_MASK (1 << ICH_VTR_A3V_SHIFT) +#define ARM64_FEATURE_FIELD_BITS 4 + +/* Create a mask for the feature bits of the specified feature. */ +#define ARM64_FEATURE_MASK(x) (GENMASK_ULL(x##_SHIFT + ARM64_FEATURE_FIELD_BITS - 1, x##_SHIFT)) + #ifdef __ASSEMBLY__ .irp num,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30 diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h index cc3f5a33ff9c..412a3b9a3c25 100644 --- a/arch/arm64/include/asm/tlbflush.h +++ b/arch/arm64/include/asm/tlbflush.h @@ -245,9 +245,10 @@ static inline void flush_tlb_all(void) static inline void flush_tlb_mm(struct mm_struct *mm) { - unsigned long asid = __TLBI_VADDR(0, ASID(mm)); + unsigned long asid; dsb(ishst); + asid = __TLBI_VADDR(0, ASID(mm)); __tlbi(aside1is, asid); __tlbi_user(aside1is, asid); dsb(ish); @@ -256,9 +257,10 @@ static inline void flush_tlb_mm(struct mm_struct *mm) static inline void flush_tlb_page_nosync(struct vm_area_struct *vma, unsigned long uaddr) { - unsigned long addr = __TLBI_VADDR(uaddr, ASID(vma->vm_mm)); + unsigned long addr; dsb(ishst); + addr = __TLBI_VADDR(uaddr, ASID(vma->vm_mm)); __tlbi(vale1is, addr); __tlbi_user(vale1is, addr); } @@ -283,9 +285,7 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma, { int num = 0; int scale = 0; - unsigned long asid = ASID(vma->vm_mm); - unsigned long addr; - unsigned long pages; + unsigned long asid, addr, pages; start = round_down(start, stride); end = round_up(end, stride); @@ -305,10 +305,11 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma, } dsb(ishst); + asid = ASID(vma->vm_mm); /* * When the CPU does not support TLB range operations, flush the TLB - * entries one by one at the granularity of 'stride'. If the the TLB + * entries one by one at the granularity of 'stride'. If the TLB * range ops are supported, then: * * 1. If 'pages' is odd, flush the first page through non-range diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h index b5f08621fa29..190b494e22ab 100644 --- a/arch/arm64/include/asm/uaccess.h +++ b/arch/arm64/include/asm/uaccess.h @@ -430,17 +430,6 @@ extern unsigned long __must_check __arch_copy_to_user(void __user *to, const voi __actu_ret; \ }) -extern unsigned long __must_check __arch_copy_in_user(void __user *to, const void __user *from, unsigned long n); -#define raw_copy_in_user(to, from, n) \ -({ \ - unsigned long __aciu_ret; \ - uaccess_ttbr0_enable(); \ - __aciu_ret = __arch_copy_in_user(__uaccess_mask_ptr(to), \ - __uaccess_mask_ptr(from), (n)); \ - uaccess_ttbr0_disable(); \ - __aciu_ret; \ -}) - #define INLINE_COPY_TO_USER #define INLINE_COPY_FROM_USER diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h index 727bfc3be99b..3cb206aea3db 100644 --- a/arch/arm64/include/asm/unistd.h +++ b/arch/arm64/include/asm/unistd.h @@ -38,7 +38,7 @@ #define __ARM_NR_compat_set_tls (__ARM_NR_COMPAT_BASE + 5) #define __ARM_NR_COMPAT_END (__ARM_NR_COMPAT_BASE + 0x800) -#define __NR_compat_syscalls 447 +#define __NR_compat_syscalls 449 #endif #define __ARCH_WANT_SYS_CLONE diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h index 99ffcafc736c..844f6ae58662 100644 --- a/arch/arm64/include/asm/unistd32.h +++ b/arch/arm64/include/asm/unistd32.h @@ -279,7 +279,7 @@ __SYSCALL(__NR_getpgid, sys_getpgid) #define __NR_fchdir 133 __SYSCALL(__NR_fchdir, sys_fchdir) #define __NR_bdflush 134 -__SYSCALL(__NR_bdflush, sys_bdflush) +__SYSCALL(__NR_bdflush, sys_ni_syscall) #define __NR_sysfs 135 __SYSCALL(__NR_sysfs, sys_sysfs) #define __NR_personality 136 @@ -649,11 +649,11 @@ __SYSCALL(__NR_inotify_add_watch, sys_inotify_add_watch) #define __NR_inotify_rm_watch 318 __SYSCALL(__NR_inotify_rm_watch, sys_inotify_rm_watch) #define __NR_mbind 319 -__SYSCALL(__NR_mbind, compat_sys_mbind) +__SYSCALL(__NR_mbind, sys_mbind) #define __NR_get_mempolicy 320 -__SYSCALL(__NR_get_mempolicy, compat_sys_get_mempolicy) +__SYSCALL(__NR_get_mempolicy, sys_get_mempolicy) #define __NR_set_mempolicy 321 -__SYSCALL(__NR_set_mempolicy, compat_sys_set_mempolicy) +__SYSCALL(__NR_set_mempolicy, sys_set_mempolicy) #define __NR_openat 322 __SYSCALL(__NR_openat, compat_sys_openat) #define __NR_mkdirat 323 @@ -699,7 +699,7 @@ __SYSCALL(__NR_tee, sys_tee) #define __NR_vmsplice 343 __SYSCALL(__NR_vmsplice, sys_vmsplice) #define __NR_move_pages 344 -__SYSCALL(__NR_move_pages, compat_sys_move_pages) +__SYSCALL(__NR_move_pages, sys_move_pages) #define __NR_getcpu 345 __SYSCALL(__NR_getcpu, sys_getcpu) #define __NR_epoll_pwait 346 @@ -811,7 +811,7 @@ __SYSCALL(__NR_rseq, sys_rseq) #define __NR_io_pgetevents 399 __SYSCALL(__NR_io_pgetevents, compat_sys_io_pgetevents) #define __NR_migrate_pages 400 -__SYSCALL(__NR_migrate_pages, compat_sys_migrate_pages) +__SYSCALL(__NR_migrate_pages, sys_migrate_pages) #define __NR_kexec_file_load 401 __SYSCALL(__NR_kexec_file_load, sys_kexec_file_load) /* 402 is unused */ @@ -901,6 +901,8 @@ __SYSCALL(__NR_landlock_create_ruleset, sys_landlock_create_ruleset) __SYSCALL(__NR_landlock_add_rule, sys_landlock_add_rule) #define __NR_landlock_restrict_self 446 __SYSCALL(__NR_landlock_restrict_self, sys_landlock_restrict_self) +#define __NR_process_mrelease 448 +__SYSCALL(__NR_process_mrelease, sys_process_mrelease) /* * Please add new compat syscalls above this comment and update diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index cce308586fcc..3f1490bfb938 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -17,7 +17,7 @@ CFLAGS_syscall.o += -fno-stack-protector # It's not safe to invoke KCOV when portions of the kernel environment aren't # available or are out-of-sync with HW state. Since `noinstr` doesn't always # inhibit KCOV instrumentation, disable it for the entire compilation unit. -KCOV_INSTRUMENT_entry.o := n +KCOV_INSTRUMENT_entry-common.o := n KCOV_INSTRUMENT_idle.o := n # Object file lists. diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c index f3851724fe35..1c9c2f7a1c04 100644 --- a/arch/arm64/kernel/acpi.c +++ b/arch/arm64/kernel/acpi.c @@ -273,7 +273,8 @@ pgprot_t __acpi_get_mem_attribute(phys_addr_t addr) return __pgprot(PROT_DEVICE_nGnRnE); } -void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size) +static void __iomem *__acpi_os_ioremap(acpi_physical_address phys, + acpi_size size, bool memory) { efi_memory_desc_t *md, *region = NULL; pgprot_t prot; @@ -299,9 +300,11 @@ void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size) * It is fine for AML to remap regions that are not represented in the * EFI memory map at all, as it only describes normal memory, and MMIO * regions that require a virtual mapping to make them accessible to - * the EFI runtime services. + * the EFI runtime services. Determine the region default + * attributes by checking the requested memory semantics. */ - prot = __pgprot(PROT_DEVICE_nGnRnE); + prot = memory ? __pgprot(PROT_NORMAL_NC) : + __pgprot(PROT_DEVICE_nGnRnE); if (region) { switch (region->type) { case EFI_LOADER_CODE: @@ -361,6 +364,16 @@ void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size) return __ioremap(phys, size, prot); } +void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size) +{ + return __acpi_os_ioremap(phys, size, false); +} + +void __iomem *acpi_os_memmap(acpi_physical_address phys, acpi_size size) +{ + return __acpi_os_ioremap(phys, size, true); +} + /* * Claim Synchronous External Aborts as a firmware first notification. * diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c index c85670692afa..551427ae8cc5 100644 --- a/arch/arm64/kernel/asm-offsets.c +++ b/arch/arm64/kernel/asm-offsets.c @@ -52,7 +52,7 @@ int main(void) DEFINE(THREAD_KEYS_KERNEL, offsetof(struct task_struct, thread.keys_kernel)); #endif #ifdef CONFIG_ARM64_MTE - DEFINE(THREAD_GCR_EL1_USER, offsetof(struct task_struct, thread.gcr_user_excl)); + DEFINE(THREAD_MTE_CTRL, offsetof(struct task_struct, thread.mte_ctrl)); #endif BLANK(); DEFINE(S_X0, offsetof(struct pt_regs, regs[0])); diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index 125d5c9471ac..f8a3067d10c6 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -67,6 +67,7 @@ #include <linux/crash_dump.h> #include <linux/sort.h> #include <linux/stop_machine.h> +#include <linux/sysfs.h> #include <linux/types.h> #include <linux/minmax.h> #include <linux/mm.h> @@ -81,6 +82,7 @@ #include <asm/mmu_context.h> #include <asm/mte.h> #include <asm/processor.h> +#include <asm/smp.h> #include <asm/sysreg.h> #include <asm/traps.h> #include <asm/virt.h> @@ -238,8 +240,8 @@ static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = { S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_FP_SHIFT, 4, ID_AA64PFR0_FP_NI), ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL3_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL2_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_SHIFT, 4, ID_AA64PFR0_EL1_64BIT_ONLY), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL0_SHIFT, 4, ID_AA64PFR0_EL0_64BIT_ONLY), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_SHIFT, 4, ID_AA64PFR0_ELx_64BIT_ONLY), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL0_SHIFT, 4, ID_AA64PFR0_ELx_64BIT_ONLY), ARM64_FTR_END, }; @@ -1320,6 +1322,31 @@ const struct cpumask *system_32bit_el0_cpumask(void) return cpu_possible_mask; } +static int __init parse_32bit_el0_param(char *str) +{ + allow_mismatched_32bit_el0 = true; + return 0; +} +early_param("allow_mismatched_32bit_el0", parse_32bit_el0_param); + +static ssize_t aarch32_el0_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + const struct cpumask *mask = system_32bit_el0_cpumask(); + + return sysfs_emit(buf, "%*pbl\n", cpumask_pr_args(mask)); +} +static const DEVICE_ATTR_RO(aarch32_el0); + +static int __init aarch32_el0_sysfs_init(void) +{ + if (!allow_mismatched_32bit_el0) + return 0; + + return device_create_file(cpu_subsys.dev_root, &dev_attr_aarch32_el0); +} +device_initcall(aarch32_el0_sysfs_init); + static bool has_32bit_el0(const struct arm64_cpu_capabilities *entry, int scope) { if (!has_cpuid_feature(entry, scope)) @@ -1560,8 +1587,6 @@ kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused) if (!cpu) arm64_use_ng_mappings = true; - - return; } #else static void @@ -1733,7 +1758,7 @@ static void cpu_has_fwb(const struct arm64_cpu_capabilities *__unused) u64 val = read_sysreg_s(SYS_CLIDR_EL1); /* Check that CLIDR_EL1.LOU{U,IS} are both 0 */ - WARN_ON(val & (7 << 27 | 7 << 21)); + WARN_ON(CLIDR_LOUU(val) || CLIDR_LOUIS(val)); } #ifdef CONFIG_ARM64_PAN @@ -1842,6 +1867,9 @@ static void bti_enable(const struct arm64_cpu_capabilities *__unused) #ifdef CONFIG_ARM64_MTE static void cpu_enable_mte(struct arm64_cpu_capabilities const *cap) { + sysreg_clear_set(sctlr_el1, 0, SCTLR_ELx_ATA | SCTLR_EL1_ATA0); + isb(); + /* * Clear the tags in the zero page. This needs to be done via the * linear map which has the Tagged attribute. @@ -1955,7 +1983,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .sys_reg = SYS_ID_AA64PFR0_EL1, .sign = FTR_UNSIGNED, .field_pos = ID_AA64PFR0_EL0_SHIFT, - .min_field_value = ID_AA64PFR0_EL0_32BIT_64BIT, + .min_field_value = ID_AA64PFR0_ELx_32BIT_64BIT, }, #ifdef CONFIG_KVM { @@ -1966,7 +1994,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .sys_reg = SYS_ID_AA64PFR0_EL1, .sign = FTR_UNSIGNED, .field_pos = ID_AA64PFR0_EL1_SHIFT, - .min_field_value = ID_AA64PFR0_EL1_32BIT_64BIT, + .min_field_value = ID_AA64PFR0_ELx_32BIT_64BIT, }, { .desc = "Protected KVM", @@ -2900,15 +2928,38 @@ void __init setup_cpu_features(void) static int enable_mismatched_32bit_el0(unsigned int cpu) { + /* + * The first 32-bit-capable CPU we detected and so can no longer + * be offlined by userspace. -1 indicates we haven't yet onlined + * a 32-bit-capable CPU. + */ + static int lucky_winner = -1; + struct cpuinfo_arm64 *info = &per_cpu(cpu_data, cpu); bool cpu_32bit = id_aa64pfr0_32bit_el0(info->reg_id_aa64pfr0); if (cpu_32bit) { cpumask_set_cpu(cpu, cpu_32bit_el0_mask); static_branch_enable_cpuslocked(&arm64_mismatched_32bit_el0); - setup_elf_hwcaps(compat_elf_hwcaps); } + if (cpumask_test_cpu(0, cpu_32bit_el0_mask) == cpu_32bit) + return 0; + + if (lucky_winner >= 0) + return 0; + + /* + * We've detected a mismatch. We need to keep one of our CPUs with + * 32-bit EL0 online so that is_cpu_allowed() doesn't end up rejecting + * every CPU in the system for a 32-bit task. + */ + lucky_winner = cpu_32bit ? cpu : cpumask_any_and(cpu_32bit_el0_mask, + cpu_active_mask); + get_cpu_device(lucky_winner)->offline_disabled = true; + setup_elf_hwcaps(compat_elf_hwcaps); + pr_info("Asymmetric 32-bit EL0 support detected on CPU %u; CPU hot-unplug disabled on CPU %u\n", + cpu, lucky_winner); return 0; } diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c index fa02efb28e88..e1be6c429810 100644 --- a/arch/arm64/kernel/efi.c +++ b/arch/arm64/kernel/efi.c @@ -55,6 +55,7 @@ static __init pteval_t create_mapping_protection(efi_memory_desc_t *md) /* we will fill this structure from the stub, so don't put it in .bss */ struct screen_info screen_info __section(".data"); +EXPORT_SYMBOL(screen_info); int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md) { diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c index 12ce14a98b7c..32f9796c4ffe 100644 --- a/arch/arm64/kernel/entry-common.c +++ b/arch/arm64/kernel/entry-common.c @@ -26,10 +26,14 @@ #include <asm/system_misc.h> /* + * Handle IRQ/context state management when entering from kernel mode. + * Before this function is called it is not safe to call regular kernel code, + * intrumentable code, or any code which may trigger an exception. + * * This is intended to match the logic in irqentry_enter(), handling the kernel * mode transitions only. */ -static void noinstr enter_from_kernel_mode(struct pt_regs *regs) +static __always_inline void __enter_from_kernel_mode(struct pt_regs *regs) { regs->exit_rcu = false; @@ -45,20 +49,26 @@ static void noinstr enter_from_kernel_mode(struct pt_regs *regs) lockdep_hardirqs_off(CALLER_ADDR0); rcu_irq_enter_check_tick(); trace_hardirqs_off_finish(); +} +static void noinstr enter_from_kernel_mode(struct pt_regs *regs) +{ + __enter_from_kernel_mode(regs); mte_check_tfsr_entry(); } /* + * Handle IRQ/context state management when exiting to kernel mode. + * After this function returns it is not safe to call regular kernel code, + * intrumentable code, or any code which may trigger an exception. + * * This is intended to match the logic in irqentry_exit(), handling the kernel * mode transitions only, and with preemption handled elsewhere. */ -static void noinstr exit_to_kernel_mode(struct pt_regs *regs) +static __always_inline void __exit_to_kernel_mode(struct pt_regs *regs) { lockdep_assert_irqs_disabled(); - mte_check_tfsr_exit(); - if (interrupts_enabled(regs)) { if (regs->exit_rcu) { trace_hardirqs_on_prepare(); @@ -75,6 +85,71 @@ static void noinstr exit_to_kernel_mode(struct pt_regs *regs) } } +static void noinstr exit_to_kernel_mode(struct pt_regs *regs) +{ + mte_check_tfsr_exit(); + __exit_to_kernel_mode(regs); +} + +/* + * Handle IRQ/context state management when entering from user mode. + * Before this function is called it is not safe to call regular kernel code, + * intrumentable code, or any code which may trigger an exception. + */ +static __always_inline void __enter_from_user_mode(void) +{ + lockdep_hardirqs_off(CALLER_ADDR0); + CT_WARN_ON(ct_state() != CONTEXT_USER); + user_exit_irqoff(); + trace_hardirqs_off_finish(); +} + +static __always_inline void enter_from_user_mode(struct pt_regs *regs) +{ + __enter_from_user_mode(); +} + +/* + * Handle IRQ/context state management when exiting to user mode. + * After this function returns it is not safe to call regular kernel code, + * intrumentable code, or any code which may trigger an exception. + */ +static __always_inline void __exit_to_user_mode(void) +{ + trace_hardirqs_on_prepare(); + lockdep_hardirqs_on_prepare(CALLER_ADDR0); + user_enter_irqoff(); + lockdep_hardirqs_on(CALLER_ADDR0); +} + +static __always_inline void prepare_exit_to_user_mode(struct pt_regs *regs) +{ + unsigned long flags; + + local_daif_mask(); + + flags = READ_ONCE(current_thread_info()->flags); + if (unlikely(flags & _TIF_WORK_MASK)) + do_notify_resume(regs, flags); +} + +static __always_inline void exit_to_user_mode(struct pt_regs *regs) +{ + prepare_exit_to_user_mode(regs); + mte_check_tfsr_exit(); + __exit_to_user_mode(); +} + +asmlinkage void noinstr asm_exit_to_user_mode(struct pt_regs *regs) +{ + exit_to_user_mode(regs); +} + +/* + * Handle IRQ/context state management when entering an NMI from user/kernel + * mode. Before this function is called it is not safe to call regular kernel + * code, intrumentable code, or any code which may trigger an exception. + */ static void noinstr arm64_enter_nmi(struct pt_regs *regs) { regs->lockdep_hardirqs = lockdep_hardirqs_enabled(); @@ -88,6 +163,11 @@ static void noinstr arm64_enter_nmi(struct pt_regs *regs) ftrace_nmi_enter(); } +/* + * Handle IRQ/context state management when exiting an NMI from user/kernel + * mode. After this function returns it is not safe to call regular kernel + * code, intrumentable code, or any code which may trigger an exception. + */ static void noinstr arm64_exit_nmi(struct pt_regs *regs) { bool restore = regs->lockdep_hardirqs; @@ -105,6 +185,40 @@ static void noinstr arm64_exit_nmi(struct pt_regs *regs) __nmi_exit(); } +/* + * Handle IRQ/context state management when entering a debug exception from + * kernel mode. Before this function is called it is not safe to call regular + * kernel code, intrumentable code, or any code which may trigger an exception. + */ +static void noinstr arm64_enter_el1_dbg(struct pt_regs *regs) +{ + regs->lockdep_hardirqs = lockdep_hardirqs_enabled(); + + lockdep_hardirqs_off(CALLER_ADDR0); + rcu_nmi_enter(); + + trace_hardirqs_off_finish(); +} + +/* + * Handle IRQ/context state management when exiting a debug exception from + * kernel mode. After this function returns it is not safe to call regular + * kernel code, intrumentable code, or any code which may trigger an exception. + */ +static void noinstr arm64_exit_el1_dbg(struct pt_regs *regs) +{ + bool restore = regs->lockdep_hardirqs; + + if (restore) { + trace_hardirqs_on_prepare(); + lockdep_hardirqs_on_prepare(CALLER_ADDR0); + } + + rcu_nmi_exit(); + if (restore) + lockdep_hardirqs_on(CALLER_ADDR0); +} + static void noinstr enter_el1_irq_or_nmi(struct pt_regs *regs) { if (IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI) && !interrupts_enabled(regs)) @@ -265,30 +379,6 @@ static void noinstr el1_undef(struct pt_regs *regs) exit_to_kernel_mode(regs); } -static void noinstr arm64_enter_el1_dbg(struct pt_regs *regs) -{ - regs->lockdep_hardirqs = lockdep_hardirqs_enabled(); - - lockdep_hardirqs_off(CALLER_ADDR0); - rcu_nmi_enter(); - - trace_hardirqs_off_finish(); -} - -static void noinstr arm64_exit_el1_dbg(struct pt_regs *regs) -{ - bool restore = regs->lockdep_hardirqs; - - if (restore) { - trace_hardirqs_on_prepare(); - lockdep_hardirqs_on_prepare(CALLER_ADDR0); - } - - rcu_nmi_exit(); - if (restore) - lockdep_hardirqs_on(CALLER_ADDR0); -} - static void noinstr el1_dbg(struct pt_regs *regs, unsigned long esr) { unsigned long far = read_sysreg(far_el1); @@ -382,31 +472,14 @@ asmlinkage void noinstr el1h_64_error_handler(struct pt_regs *regs) arm64_exit_nmi(regs); } -asmlinkage void noinstr enter_from_user_mode(void) -{ - lockdep_hardirqs_off(CALLER_ADDR0); - CT_WARN_ON(ct_state() != CONTEXT_USER); - user_exit_irqoff(); - trace_hardirqs_off_finish(); -} - -asmlinkage void noinstr exit_to_user_mode(void) -{ - mte_check_tfsr_exit(); - - trace_hardirqs_on_prepare(); - lockdep_hardirqs_on_prepare(CALLER_ADDR0); - user_enter_irqoff(); - lockdep_hardirqs_on(CALLER_ADDR0); -} - static void noinstr el0_da(struct pt_regs *regs, unsigned long esr) { unsigned long far = read_sysreg(far_el1); - enter_from_user_mode(); + enter_from_user_mode(regs); local_daif_restore(DAIF_PROCCTX); do_mem_abort(far, esr, regs); + exit_to_user_mode(regs); } static void noinstr el0_ia(struct pt_regs *regs, unsigned long esr) @@ -421,37 +494,42 @@ static void noinstr el0_ia(struct pt_regs *regs, unsigned long esr) if (!is_ttbr0_addr(far)) arm64_apply_bp_hardening(); - enter_from_user_mode(); + enter_from_user_mode(regs); local_daif_restore(DAIF_PROCCTX); do_mem_abort(far, esr, regs); + exit_to_user_mode(regs); } static void noinstr el0_fpsimd_acc(struct pt_regs *regs, unsigned long esr) { - enter_from_user_mode(); + enter_from_user_mode(regs); local_daif_restore(DAIF_PROCCTX); do_fpsimd_acc(esr, regs); + exit_to_user_mode(regs); } static void noinstr el0_sve_acc(struct pt_regs *regs, unsigned long esr) { - enter_from_user_mode(); + enter_from_user_mode(regs); local_daif_restore(DAIF_PROCCTX); do_sve_acc(esr, regs); + exit_to_user_mode(regs); } static void noinstr el0_fpsimd_exc(struct pt_regs *regs, unsigned long esr) { - enter_from_user_mode(); + enter_from_user_mode(regs); local_daif_restore(DAIF_PROCCTX); do_fpsimd_exc(esr, regs); + exit_to_user_mode(regs); } static void noinstr el0_sys(struct pt_regs *regs, unsigned long esr) { - enter_from_user_mode(); + enter_from_user_mode(regs); local_daif_restore(DAIF_PROCCTX); do_sysinstr(esr, regs); + exit_to_user_mode(regs); } static void noinstr el0_pc(struct pt_regs *regs, unsigned long esr) @@ -461,37 +539,42 @@ static void noinstr el0_pc(struct pt_regs *regs, unsigned long esr) if (!is_ttbr0_addr(instruction_pointer(regs))) arm64_apply_bp_hardening(); - enter_from_user_mode(); + enter_from_user_mode(regs); local_daif_restore(DAIF_PROCCTX); do_sp_pc_abort(far, esr, regs); + exit_to_user_mode(regs); } static void noinstr el0_sp(struct pt_regs *regs, unsigned long esr) { - enter_from_user_mode(); + enter_from_user_mode(regs); local_daif_restore(DAIF_PROCCTX); do_sp_pc_abort(regs->sp, esr, regs); + exit_to_user_mode(regs); } static void noinstr el0_undef(struct pt_regs *regs) { - enter_from_user_mode(); + enter_from_user_mode(regs); local_daif_restore(DAIF_PROCCTX); do_undefinstr(regs); + exit_to_user_mode(regs); } static void noinstr el0_bti(struct pt_regs *regs) { - enter_from_user_mode(); + enter_from_user_mode(regs); local_daif_restore(DAIF_PROCCTX); do_bti(regs); + exit_to_user_mode(regs); } static void noinstr el0_inv(struct pt_regs *regs, unsigned long esr) { - enter_from_user_mode(); + enter_from_user_mode(regs); local_daif_restore(DAIF_PROCCTX); bad_el0_sync(regs, 0, esr); + exit_to_user_mode(regs); } static void noinstr el0_dbg(struct pt_regs *regs, unsigned long esr) @@ -499,23 +582,26 @@ static void noinstr el0_dbg(struct pt_regs *regs, unsigned long esr) /* Only watchpoints write FAR_EL1, otherwise its UNKNOWN */ unsigned long far = read_sysreg(far_el1); - enter_from_user_mode(); + enter_from_user_mode(regs); do_debug_exception(far, esr, regs); local_daif_restore(DAIF_PROCCTX); + exit_to_user_mode(regs); } static void noinstr el0_svc(struct pt_regs *regs) { - enter_from_user_mode(); + enter_from_user_mode(regs); cortex_a76_erratum_1463225_svc_handler(); do_el0_svc(regs); + exit_to_user_mode(regs); } static void noinstr el0_fpac(struct pt_regs *regs, unsigned long esr) { - enter_from_user_mode(); + enter_from_user_mode(regs); local_daif_restore(DAIF_PROCCTX); do_ptrauth_fault(regs, esr); + exit_to_user_mode(regs); } asmlinkage void noinstr el0t_64_sync_handler(struct pt_regs *regs) @@ -574,7 +660,7 @@ asmlinkage void noinstr el0t_64_sync_handler(struct pt_regs *regs) static void noinstr el0_interrupt(struct pt_regs *regs, void (*handler)(struct pt_regs *)) { - enter_from_user_mode(); + enter_from_user_mode(regs); write_sysreg(DAIF_PROCCTX_NOIRQ, daif); @@ -582,6 +668,8 @@ static void noinstr el0_interrupt(struct pt_regs *regs, arm64_apply_bp_hardening(); do_interrupt_handler(regs, handler); + + exit_to_user_mode(regs); } static void noinstr __el0_irq_handler_common(struct pt_regs *regs) @@ -604,16 +692,17 @@ asmlinkage void noinstr el0t_64_fiq_handler(struct pt_regs *regs) __el0_fiq_handler_common(regs); } -static void __el0_error_handler_common(struct pt_regs *regs) +static void noinstr __el0_error_handler_common(struct pt_regs *regs) { unsigned long esr = read_sysreg(esr_el1); - enter_from_user_mode(); + enter_from_user_mode(regs); local_daif_restore(DAIF_ERRCTX); arm64_enter_nmi(regs); do_serror(regs, esr); arm64_exit_nmi(regs); local_daif_restore(DAIF_PROCCTX); + exit_to_user_mode(regs); } asmlinkage void noinstr el0t_64_error_handler(struct pt_regs *regs) @@ -624,16 +713,18 @@ asmlinkage void noinstr el0t_64_error_handler(struct pt_regs *regs) #ifdef CONFIG_COMPAT static void noinstr el0_cp15(struct pt_regs *regs, unsigned long esr) { - enter_from_user_mode(); + enter_from_user_mode(regs); local_daif_restore(DAIF_PROCCTX); do_cp15instr(esr, regs); + exit_to_user_mode(regs); } static void noinstr el0_svc_compat(struct pt_regs *regs) { - enter_from_user_mode(); + enter_from_user_mode(regs); cortex_a76_erratum_1463225_svc_handler(); do_el0_svc_compat(regs); + exit_to_user_mode(regs); } asmlinkage void noinstr el0t_32_sync_handler(struct pt_regs *regs) diff --git a/arch/arm64/kernel/entry-fpsimd.S b/arch/arm64/kernel/entry-fpsimd.S index 0a7a64753878..196e921f61de 100644 --- a/arch/arm64/kernel/entry-fpsimd.S +++ b/arch/arm64/kernel/entry-fpsimd.S @@ -33,11 +33,24 @@ SYM_FUNC_END(fpsimd_load_state) #ifdef CONFIG_ARM64_SVE +/* + * Save the SVE state + * + * x0 - pointer to buffer for state + * x1 - pointer to storage for FPSR + */ SYM_FUNC_START(sve_save_state) sve_save 0, x1, 2 ret SYM_FUNC_END(sve_save_state) +/* + * Load the SVE state + * + * x0 - pointer to buffer for state + * x1 - pointer to storage for FPSR + * x2 - VQ-1 + */ SYM_FUNC_START(sve_load_state) sve_load 0, x1, x2, 3, x4 ret diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index 863d44f73028..bc6d5a970a13 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -29,16 +29,6 @@ #include <asm/asm-uaccess.h> #include <asm/unistd.h> -/* - * Context tracking and irqflag tracing need to instrument transitions between - * user and kernel mode. - */ - .macro user_enter_irqoff -#if defined(CONFIG_CONTEXT_TRACKING) || defined(CONFIG_TRACE_IRQFLAGS) - bl exit_to_user_mode -#endif - .endm - .macro clear_gp_regs .irp n,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29 mov x\n, xzr @@ -133,42 +123,46 @@ alternative_cb_end .endm /* Check for MTE asynchronous tag check faults */ - .macro check_mte_async_tcf, tmp, ti_flags + .macro check_mte_async_tcf, tmp, ti_flags, thread_sctlr #ifdef CONFIG_ARM64_MTE .arch_extension lse alternative_if_not ARM64_MTE b 1f alternative_else_nop_endif + /* + * Asynchronous tag check faults are only possible in ASYNC (2) or + * ASYM (3) modes. In each of these modes bit 1 of SCTLR_EL1.TCF0 is + * set, so skip the check if it is unset. + */ + tbz \thread_sctlr, #(SCTLR_EL1_TCF0_SHIFT + 1), 1f mrs_s \tmp, SYS_TFSRE0_EL1 tbz \tmp, #SYS_TFSR_EL1_TF0_SHIFT, 1f /* Asynchronous TCF occurred for TTBR0 access, set the TI flag */ mov \tmp, #_TIF_MTE_ASYNC_FAULT add \ti_flags, tsk, #TSK_TI_FLAGS stset \tmp, [\ti_flags] - msr_s SYS_TFSRE0_EL1, xzr 1: #endif .endm /* Clear the MTE asynchronous tag check faults */ - .macro clear_mte_async_tcf + .macro clear_mte_async_tcf thread_sctlr #ifdef CONFIG_ARM64_MTE alternative_if ARM64_MTE + /* See comment in check_mte_async_tcf above. */ + tbz \thread_sctlr, #(SCTLR_EL1_TCF0_SHIFT + 1), 1f dsb ish msr_s SYS_TFSRE0_EL1, xzr +1: alternative_else_nop_endif #endif .endm - .macro mte_set_gcr, tmp, tmp2 + .macro mte_set_gcr, mte_ctrl, tmp #ifdef CONFIG_ARM64_MTE - /* - * Calculate and set the exclude mask preserving - * the RRND (bit[16]) setting. - */ - mrs_s \tmp2, SYS_GCR_EL1 - bfi \tmp2, \tmp, #0, #16 - msr_s SYS_GCR_EL1, \tmp2 + ubfx \tmp, \mte_ctrl, #MTE_CTRL_GCR_USER_EXCL_SHIFT, #16 + orr \tmp, \tmp, #SYS_GCR_EL1_RRND + msr_s SYS_GCR_EL1, \tmp #endif .endm @@ -177,10 +171,8 @@ alternative_else_nop_endif alternative_if_not ARM64_MTE b 1f alternative_else_nop_endif - ldr_l \tmp, gcr_kernel_excl - - mte_set_gcr \tmp, \tmp2 - isb + mov \tmp, KERNEL_GCR_EL1 + msr_s SYS_GCR_EL1, \tmp 1: #endif .endm @@ -190,7 +182,7 @@ alternative_else_nop_endif alternative_if_not ARM64_MTE b 1f alternative_else_nop_endif - ldr \tmp, [\tsk, #THREAD_GCR_EL1_USER] + ldr \tmp, [\tsk, #THREAD_MTE_CTRL] mte_set_gcr \tmp, \tmp2 1: @@ -231,8 +223,8 @@ alternative_else_nop_endif disable_step_tsk x19, x20 /* Check for asynchronous tag check faults in user space */ - check_mte_async_tcf x22, x23 - apply_ssbd 1, x22, x23 + ldr x0, [tsk, THREAD_SCTLR_USER] + check_mte_async_tcf x22, x23, x0 #ifdef CONFIG_ARM64_PTR_AUTH alternative_if ARM64_HAS_ADDRESS_AUTH @@ -245,7 +237,6 @@ alternative_if ARM64_HAS_ADDRESS_AUTH * was disabled on kernel exit then we would have left the kernel IA * installed so there is no need to install it again. */ - ldr x0, [tsk, THREAD_SCTLR_USER] tbz x0, SCTLR_ELx_ENIA_SHIFT, 1f __ptrauth_keys_install_kernel_nosync tsk, x20, x22, x23 b 2f @@ -254,12 +245,26 @@ alternative_if ARM64_HAS_ADDRESS_AUTH orr x0, x0, SCTLR_ELx_ENIA msr sctlr_el1, x0 2: - isb alternative_else_nop_endif #endif + apply_ssbd 1, x22, x23 + mte_set_kernel_gcr x22, x23 + /* + * Any non-self-synchronizing system register updates required for + * kernel entry should be placed before this point. + */ +alternative_if ARM64_MTE + isb + b 1f +alternative_else_nop_endif +alternative_if ARM64_HAS_ADDRESS_AUTH + isb +alternative_else_nop_endif +1: + scs_load tsk .else add x21, sp, #PT_REGS_SIZE @@ -362,6 +367,10 @@ alternative_else_nop_endif 3: scs_save tsk + /* Ignore asynchronous tag check faults in the uaccess routines */ + ldr x0, [tsk, THREAD_SCTLR_USER] + clear_mte_async_tcf x0 + #ifdef CONFIG_ARM64_PTR_AUTH alternative_if ARM64_HAS_ADDRESS_AUTH /* @@ -371,7 +380,6 @@ alternative_if ARM64_HAS_ADDRESS_AUTH * * No kernel C function calls after this. */ - ldr x0, [tsk, THREAD_SCTLR_USER] tbz x0, SCTLR_ELx_ENIA_SHIFT, 1f __ptrauth_keys_install_user tsk, x0, x1, x2 b 2f @@ -474,18 +482,6 @@ SYM_CODE_END(__swpan_exit_el0) /* GPRs used by entry code */ tsk .req x28 // current thread_info -/* - * Interrupt handling. - */ - .macro gic_prio_kentry_setup, tmp:req -#ifdef CONFIG_ARM64_PSEUDO_NMI - alternative_if ARM64_HAS_IRQ_PRIO_MASKING - mov \tmp, #(GIC_PRIO_PSR_I_SET | GIC_PRIO_IRQON) - msr_s SYS_ICC_PMR_EL1, \tmp - alternative_else_nop_endif -#endif - .endm - .text /* @@ -517,12 +513,13 @@ SYM_CODE_START(vectors) SYM_CODE_END(vectors) #ifdef CONFIG_VMAP_STACK +SYM_CODE_START_LOCAL(__bad_stack) /* * We detected an overflow in kernel_ventry, which switched to the * overflow stack. Stash the exception regs, and head to our overflow * handler. */ -__bad_stack: + /* Restore the original x0 value */ mrs x0, tpidrro_el0 @@ -542,6 +539,7 @@ __bad_stack: /* Time to die */ bl handle_bad_stack ASM_BUG() +SYM_CODE_END(__bad_stack) #endif /* CONFIG_VMAP_STACK */ @@ -585,37 +583,13 @@ SYM_CODE_START_LOCAL(ret_to_kernel) kernel_exit 1 SYM_CODE_END(ret_to_kernel) -/* - * "slow" syscall return path. - */ SYM_CODE_START_LOCAL(ret_to_user) - disable_daif - gic_prio_kentry_setup tmp=x3 -#ifdef CONFIG_TRACE_IRQFLAGS - bl trace_hardirqs_off -#endif - ldr x19, [tsk, #TSK_TI_FLAGS] - and x2, x19, #_TIF_WORK_MASK - cbnz x2, work_pending -finish_ret_to_user: - user_enter_irqoff - /* Ignore asynchronous tag check faults in the uaccess routines */ - clear_mte_async_tcf + ldr x19, [tsk, #TSK_TI_FLAGS] // re-check for single-step enable_step_tsk x19, x2 #ifdef CONFIG_GCC_PLUGIN_STACKLEAK bl stackleak_erase #endif kernel_exit 0 - -/* - * Ok, we need to do extra processing, enter the slow path. - */ -work_pending: - mov x0, sp // 'regs' - mov x1, x19 - bl do_notify_resume - ldr x19, [tsk, #TSK_TI_FLAGS] // re-check for single-step - b finish_ret_to_user SYM_CODE_END(ret_to_user) .popsection // .entry.text @@ -781,6 +755,8 @@ SYM_CODE_START(ret_from_fork) mov x0, x20 blr x19 1: get_current_task tsk + mov x0, sp + bl asm_exit_to_user_mode b ret_to_user SYM_CODE_END(ret_from_fork) NOKPROBE(ret_from_fork) diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index e57b23f95284..5a294f20e9de 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -162,6 +162,8 @@ extern void __percpu *efi_sve_state; DEFINE_PER_CPU(bool, fpsimd_context_busy); EXPORT_PER_CPU_SYMBOL(fpsimd_context_busy); +static void fpsimd_bind_task_to_cpu(void); + static void __get_cpu_fpsimd_context(void) { bool busy = __this_cpu_xchg(fpsimd_context_busy, true); @@ -518,12 +520,6 @@ void sve_alloc(struct task_struct *task) /* This is a small allocation (maximum ~8KB) and Should Not Fail. */ task->thread.sve_state = kzalloc(sve_state_size(task), GFP_KERNEL); - - /* - * If future SVE revisions can have larger vectors though, - * this may cease to be true: - */ - BUG_ON(!task->thread.sve_state); } @@ -943,6 +939,10 @@ void do_sve_acc(unsigned int esr, struct pt_regs *regs) } sve_alloc(current); + if (!current->thread.sve_state) { + force_sig(SIGKILL); + return; + } get_cpu_fpsimd_context(); @@ -1112,7 +1112,7 @@ void fpsimd_signal_preserve_current_state(void) * The caller must have ownership of the cpu FPSIMD context before calling * this function. */ -void fpsimd_bind_task_to_cpu(void) +static void fpsimd_bind_task_to_cpu(void) { struct fpsimd_last_state_struct *last = this_cpu_ptr(&fpsimd_last_state); diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index c5c994a73a64..17962452e31d 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -177,7 +177,7 @@ SYM_CODE_END(preserve_boot_args) * to be composed of multiple pages. (This effectively scales the end index). * * vstart: virtual address of start of range - * vend: virtual address of end of range + * vend: virtual address of end of range - we map [vstart, vend] * shift: shift used to transform virtual address into index * ptrs: number of entries in page table * istart: index in table corresponding to vstart @@ -214,17 +214,18 @@ SYM_CODE_END(preserve_boot_args) * * tbl: location of page table * rtbl: address to be used for first level page table entry (typically tbl + PAGE_SIZE) - * vstart: start address to map - * vend: end address to map - we map [vstart, vend] + * vstart: virtual address of start of range + * vend: virtual address of end of range - we map [vstart, vend - 1] * flags: flags to use to map last level entries * phys: physical address corresponding to vstart - physical memory is contiguous * pgds: the number of pgd entries * * Temporaries: istart, iend, tmp, count, sv - these need to be different registers - * Preserves: vstart, vend, flags - * Corrupts: tbl, rtbl, istart, iend, tmp, count, sv + * Preserves: vstart, flags + * Corrupts: tbl, rtbl, vend, istart, iend, tmp, count, sv */ .macro map_memory, tbl, rtbl, vstart, vend, flags, phys, pgds, istart, iend, tmp, count, sv + sub \vend, \vend, #1 add \rtbl, \tbl, #PAGE_SIZE mov \sv, \rtbl mov \count, #0 diff --git a/arch/arm64/kernel/idreg-override.c b/arch/arm64/kernel/idreg-override.c index 53a381a7f65d..d8e606fe3c21 100644 --- a/arch/arm64/kernel/idreg-override.c +++ b/arch/arm64/kernel/idreg-override.c @@ -54,6 +54,7 @@ static const struct ftr_set_desc pfr1 __initconst = { .override = &id_aa64pfr1_override, .fields = { { "bt", ID_AA64PFR1_BT_SHIFT }, + { "mte", ID_AA64PFR1_MTE_SHIFT}, {} }, }; @@ -100,6 +101,7 @@ static const struct { { "arm64.nopauth", "id_aa64isar1.gpi=0 id_aa64isar1.gpa=0 " "id_aa64isar1.api=0 id_aa64isar1.apa=0" }, + { "arm64.nomte", "id_aa64pfr1.mte=0" }, { "nokaslr", "kaslr.disabled=1" }, }; diff --git a/arch/arm64/kernel/kaslr.c b/arch/arm64/kernel/kaslr.c index cfa2cfde3019..418b2bba1521 100644 --- a/arch/arm64/kernel/kaslr.c +++ b/arch/arm64/kernel/kaslr.c @@ -162,7 +162,9 @@ u64 __init kaslr_early_init(void) * a PAGE_SIZE multiple in the range [_etext - MODULES_VSIZE, * _stext) . This guarantees that the resulting region still * covers [_stext, _etext], and that all relative branches can - * be resolved without veneers. + * be resolved without veneers unless this region is exhausted + * and we fall back to a larger 2GB window in module_alloc() + * when ARM64_MODULE_PLTS is enabled. */ module_range = MODULES_VSIZE - (u64)(_etext - _stext); module_alloc_base = (u64)_etext + offset - MODULES_VSIZE; diff --git a/arch/arm64/kernel/mte.c b/arch/arm64/kernel/mte.c index 69b3fde8759e..9d314a3bad3b 100644 --- a/arch/arm64/kernel/mte.c +++ b/arch/arm64/kernel/mte.c @@ -4,6 +4,7 @@ */ #include <linux/bitops.h> +#include <linux/cpu.h> #include <linux/kernel.h> #include <linux/mm.h> #include <linux/prctl.h> @@ -22,9 +23,7 @@ #include <asm/ptrace.h> #include <asm/sysreg.h> -u64 gcr_kernel_excl __ro_after_init; - -static bool report_fault_once = true; +static DEFINE_PER_CPU_READ_MOSTLY(u64, mte_tcf_preferred); #ifdef CONFIG_KASAN_HW_TAGS /* Whether the MTE asynchronous mode is enabled. */ @@ -101,26 +100,6 @@ int memcmp_pages(struct page *page1, struct page *page2) return ret; } -void mte_init_tags(u64 max_tag) -{ - static bool gcr_kernel_excl_initialized; - - if (!gcr_kernel_excl_initialized) { - /* - * The format of the tags in KASAN is 0xFF and in MTE is 0xF. - * This conversion extracts an MTE tag from a KASAN tag. - */ - u64 incl = GENMASK(FIELD_GET(MTE_TAG_MASK >> MTE_TAG_SHIFT, - max_tag), 0); - - gcr_kernel_excl = ~incl & SYS_GCR_EL1_EXCL_MASK; - gcr_kernel_excl_initialized = true; - } - - /* Enable the kernel exclude mask for random tags generation. */ - write_sysreg_s(SYS_GCR_EL1_RRND | gcr_kernel_excl, SYS_GCR_EL1); -} - static inline void __mte_enable_kernel(const char *mode, unsigned long tcf) { /* Enable MTE Sync Mode for EL1. */ @@ -160,16 +139,6 @@ void mte_enable_kernel_async(void) } #endif -void mte_set_report_once(bool state) -{ - WRITE_ONCE(report_fault_once, state); -} - -bool mte_report_once(void) -{ - return READ_ONCE(report_fault_once); -} - #ifdef CONFIG_KASAN_HW_TAGS void mte_check_tfsr_el1(void) { @@ -193,26 +162,26 @@ void mte_check_tfsr_el1(void) } #endif -static void update_gcr_el1_excl(u64 excl) +static void mte_update_sctlr_user(struct task_struct *task) { - - /* - * Note that the mask controlled by the user via prctl() is an - * include while GCR_EL1 accepts an exclude mask. - * No need for ISB since this only affects EL0 currently, implicit - * with ERET. - */ - sysreg_clear_set_s(SYS_GCR_EL1, SYS_GCR_EL1_EXCL_MASK, excl); -} - -static void set_gcr_el1_excl(u64 excl) -{ - current->thread.gcr_user_excl = excl; - /* - * SYS_GCR_EL1 will be set to current->thread.gcr_user_excl value - * by mte_set_user_gcr() in kernel_exit, + * This must be called with preemption disabled and can only be called + * on the current or next task since the CPU must match where the thread + * is going to run. The caller is responsible for calling + * update_sctlr_el1() later in the same preemption disabled block. */ + unsigned long sctlr = task->thread.sctlr_user; + unsigned long mte_ctrl = task->thread.mte_ctrl; + unsigned long pref, resolved_mte_tcf; + + pref = __this_cpu_read(mte_tcf_preferred); + resolved_mte_tcf = (mte_ctrl & pref) ? pref : mte_ctrl; + sctlr &= ~SCTLR_EL1_TCF0_MASK; + if (resolved_mte_tcf & MTE_CTRL_TCF_ASYNC) + sctlr |= SCTLR_EL1_TCF0_ASYNC; + else if (resolved_mte_tcf & MTE_CTRL_TCF_SYNC) + sctlr |= SCTLR_EL1_TCF0_SYNC; + task->thread.sctlr_user = sctlr; } void mte_thread_init_user(void) @@ -224,15 +193,14 @@ void mte_thread_init_user(void) dsb(ish); write_sysreg_s(0, SYS_TFSRE0_EL1); clear_thread_flag(TIF_MTE_ASYNC_FAULT); - /* disable tag checking */ - set_task_sctlr_el1((current->thread.sctlr_user & ~SCTLR_EL1_TCF0_MASK) | - SCTLR_EL1_TCF0_NONE); - /* reset tag generation mask */ - set_gcr_el1_excl(SYS_GCR_EL1_EXCL_MASK); + /* disable tag checking and reset tag generation mask */ + set_mte_ctrl(current, 0); } void mte_thread_switch(struct task_struct *next) { + mte_update_sctlr_user(next); + /* * Check if an async tag exception occurred at EL1. * @@ -260,43 +228,25 @@ void mte_suspend_enter(void) mte_check_tfsr_el1(); } -void mte_suspend_exit(void) -{ - if (!system_supports_mte()) - return; - - update_gcr_el1_excl(gcr_kernel_excl); -} - long set_mte_ctrl(struct task_struct *task, unsigned long arg) { - u64 sctlr = task->thread.sctlr_user & ~SCTLR_EL1_TCF0_MASK; - u64 gcr_excl = ~((arg & PR_MTE_TAG_MASK) >> PR_MTE_TAG_SHIFT) & - SYS_GCR_EL1_EXCL_MASK; + u64 mte_ctrl = (~((arg & PR_MTE_TAG_MASK) >> PR_MTE_TAG_SHIFT) & + SYS_GCR_EL1_EXCL_MASK) << MTE_CTRL_GCR_USER_EXCL_SHIFT; if (!system_supports_mte()) return 0; - switch (arg & PR_MTE_TCF_MASK) { - case PR_MTE_TCF_NONE: - sctlr |= SCTLR_EL1_TCF0_NONE; - break; - case PR_MTE_TCF_SYNC: - sctlr |= SCTLR_EL1_TCF0_SYNC; - break; - case PR_MTE_TCF_ASYNC: - sctlr |= SCTLR_EL1_TCF0_ASYNC; - break; - default: - return -EINVAL; - } - - if (task != current) { - task->thread.sctlr_user = sctlr; - task->thread.gcr_user_excl = gcr_excl; - } else { - set_task_sctlr_el1(sctlr); - set_gcr_el1_excl(gcr_excl); + if (arg & PR_MTE_TCF_ASYNC) + mte_ctrl |= MTE_CTRL_TCF_ASYNC; + if (arg & PR_MTE_TCF_SYNC) + mte_ctrl |= MTE_CTRL_TCF_SYNC; + + task->thread.mte_ctrl = mte_ctrl; + if (task == current) { + preempt_disable(); + mte_update_sctlr_user(task); + update_sctlr_el1(task->thread.sctlr_user); + preempt_enable(); } return 0; @@ -305,24 +255,18 @@ long set_mte_ctrl(struct task_struct *task, unsigned long arg) long get_mte_ctrl(struct task_struct *task) { unsigned long ret; - u64 incl = ~task->thread.gcr_user_excl & SYS_GCR_EL1_EXCL_MASK; + u64 mte_ctrl = task->thread.mte_ctrl; + u64 incl = (~mte_ctrl >> MTE_CTRL_GCR_USER_EXCL_SHIFT) & + SYS_GCR_EL1_EXCL_MASK; if (!system_supports_mte()) return 0; ret = incl << PR_MTE_TAG_SHIFT; - - switch (task->thread.sctlr_user & SCTLR_EL1_TCF0_MASK) { - case SCTLR_EL1_TCF0_NONE: - ret |= PR_MTE_TCF_NONE; - break; - case SCTLR_EL1_TCF0_SYNC: - ret |= PR_MTE_TCF_SYNC; - break; - case SCTLR_EL1_TCF0_ASYNC: + if (mte_ctrl & MTE_CTRL_TCF_ASYNC) ret |= PR_MTE_TCF_ASYNC; - break; - } + if (mte_ctrl & MTE_CTRL_TCF_SYNC) + ret |= PR_MTE_TCF_SYNC; return ret; } @@ -461,3 +405,54 @@ int mte_ptrace_copy_tags(struct task_struct *child, long request, return ret; } + +static ssize_t mte_tcf_preferred_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + switch (per_cpu(mte_tcf_preferred, dev->id)) { + case MTE_CTRL_TCF_ASYNC: + return sysfs_emit(buf, "async\n"); + case MTE_CTRL_TCF_SYNC: + return sysfs_emit(buf, "sync\n"); + default: + return sysfs_emit(buf, "???\n"); + } +} + +static ssize_t mte_tcf_preferred_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + u64 tcf; + + if (sysfs_streq(buf, "async")) + tcf = MTE_CTRL_TCF_ASYNC; + else if (sysfs_streq(buf, "sync")) + tcf = MTE_CTRL_TCF_SYNC; + else + return -EINVAL; + + device_lock(dev); + per_cpu(mte_tcf_preferred, dev->id) = tcf; + device_unlock(dev); + + return count; +} +static DEVICE_ATTR_RW(mte_tcf_preferred); + +static int register_mte_tcf_preferred_sysctl(void) +{ + unsigned int cpu; + + if (!system_supports_mte()) + return 0; + + for_each_possible_cpu(cpu) { + per_cpu(mte_tcf_preferred, cpu) = MTE_CTRL_TCF_ASYNC; + device_create_file(get_cpu_device(cpu), + &dev_attr_mte_tcf_preferred); + } + + return 0; +} +subsys_initcall(register_mte_tcf_preferred_sysctl); diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c index 1006ed2d7c60..2276689b5411 100644 --- a/arch/arm64/kernel/pci.c +++ b/arch/arm64/kernel/pci.c @@ -82,14 +82,29 @@ int acpi_pci_bus_find_domain_nr(struct pci_bus *bus) int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge) { - if (!acpi_disabled) { - struct pci_config_window *cfg = bridge->bus->sysdata; - struct acpi_device *adev = to_acpi_device(cfg->parent); - struct device *bus_dev = &bridge->bus->dev; + struct pci_config_window *cfg; + struct acpi_device *adev; + struct device *bus_dev; - ACPI_COMPANION_SET(&bridge->dev, adev); - set_dev_node(bus_dev, acpi_get_node(acpi_device_handle(adev))); - } + if (acpi_disabled) + return 0; + + cfg = bridge->bus->sysdata; + + /* + * On Hyper-V there is no corresponding ACPI device for a root bridge, + * therefore ->parent is set as NULL by the driver. And set 'adev' as + * NULL in this case because there is no proper ACPI device. + */ + if (!cfg->parent) + adev = NULL; + else + adev = to_acpi_device(cfg->parent); + + bus_dev = &bridge->bus->dev; + + ACPI_COMPANION_SET(&bridge->dev, adev); + set_dev_node(bus_dev, acpi_get_node(acpi_device_handle(adev))); return 0; } diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c index d07788dad388..b4044469527e 100644 --- a/arch/arm64/kernel/perf_event.c +++ b/arch/arm64/kernel/perf_event.c @@ -1055,7 +1055,7 @@ static void __armv8pmu_probe_pmu(void *info) dfr0 = read_sysreg(id_aa64dfr0_el1); pmuver = cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_PMUVER_SHIFT); - if (pmuver == 0xf || pmuver == 0) + if (pmuver == ID_AA64DFR0_PMUVER_IMP_DEF || pmuver == 0) return; cpu_pmu->pmuver = pmuver; diff --git a/arch/arm64/kernel/pointer_auth.c b/arch/arm64/kernel/pointer_auth.c index 60901ab0a7fe..2708b620b4ae 100644 --- a/arch/arm64/kernel/pointer_auth.c +++ b/arch/arm64/kernel/pointer_auth.c @@ -67,7 +67,7 @@ static u64 arg_to_enxx_mask(unsigned long arg) int ptrauth_set_enabled_keys(struct task_struct *tsk, unsigned long keys, unsigned long enabled) { - u64 sctlr = tsk->thread.sctlr_user; + u64 sctlr; if (!system_supports_address_auth()) return -EINVAL; @@ -78,12 +78,14 @@ int ptrauth_set_enabled_keys(struct task_struct *tsk, unsigned long keys, if ((keys & ~PR_PAC_ENABLED_KEYS_MASK) || (enabled & ~keys)) return -EINVAL; + preempt_disable(); + sctlr = tsk->thread.sctlr_user; sctlr &= ~arg_to_enxx_mask(keys); sctlr |= arg_to_enxx_mask(enabled); + tsk->thread.sctlr_user = sctlr; if (tsk == current) - set_task_sctlr_el1(sctlr); - else - tsk->thread.sctlr_user = sctlr; + update_sctlr_el1(sctlr); + preempt_enable(); return 0; } diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index c8989b999250..19100fe8f7e4 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -6,9 +6,6 @@ * Copyright (C) 1996-2000 Russell King - Converted to ARM. * Copyright (C) 2012 ARM Ltd. */ - -#include <stdarg.h> - #include <linux/compat.h> #include <linux/efi.h> #include <linux/elf.h> @@ -21,6 +18,7 @@ #include <linux/mman.h> #include <linux/mm.h> #include <linux/nospec.h> +#include <linux/sched.h> #include <linux/stddef.h> #include <linux/sysctl.h> #include <linux/unistd.h> @@ -163,7 +161,7 @@ static void print_pstate(struct pt_regs *regs) u64 pstate = regs->pstate; if (compat_user_mode(regs)) { - printk("pstate: %08llx (%c%c%c%c %c %s %s %c%c%c)\n", + printk("pstate: %08llx (%c%c%c%c %c %s %s %c%c%c %cDIT %cSSBS)\n", pstate, pstate & PSR_AA32_N_BIT ? 'N' : 'n', pstate & PSR_AA32_Z_BIT ? 'Z' : 'z', @@ -174,12 +172,14 @@ static void print_pstate(struct pt_regs *regs) pstate & PSR_AA32_E_BIT ? "BE" : "LE", pstate & PSR_AA32_A_BIT ? 'A' : 'a', pstate & PSR_AA32_I_BIT ? 'I' : 'i', - pstate & PSR_AA32_F_BIT ? 'F' : 'f'); + pstate & PSR_AA32_F_BIT ? 'F' : 'f', + pstate & PSR_AA32_DIT_BIT ? '+' : '-', + pstate & PSR_AA32_SSBS_BIT ? '+' : '-'); } else { const char *btype_str = btypes[(pstate & PSR_BTYPE_MASK) >> PSR_BTYPE_SHIFT]; - printk("pstate: %08llx (%c%c%c%c %c%c%c%c %cPAN %cUAO %cTCO BTYPE=%s)\n", + printk("pstate: %08llx (%c%c%c%c %c%c%c%c %cPAN %cUAO %cTCO %cDIT %cSSBS BTYPE=%s)\n", pstate, pstate & PSR_N_BIT ? 'N' : 'n', pstate & PSR_Z_BIT ? 'Z' : 'z', @@ -192,6 +192,8 @@ static void print_pstate(struct pt_regs *regs) pstate & PSR_PAN_BIT ? '+' : '-', pstate & PSR_UAO_BIT ? '+' : '-', pstate & PSR_TCO_BIT ? '+' : '-', + pstate & PSR_DIT_BIT ? '+' : '-', + pstate & PSR_SSBS_BIT ? '+' : '-', btype_str); } } @@ -468,16 +470,13 @@ static void erratum_1418040_thread_switch(struct task_struct *prev, write_sysreg(val, cntkctl_el1); } -static void compat_thread_switch(struct task_struct *next) -{ - if (!is_compat_thread(task_thread_info(next))) - return; - - if (static_branch_unlikely(&arm64_mismatched_32bit_el0)) - set_tsk_thread_flag(next, TIF_NOTIFY_RESUME); -} - -static void update_sctlr_el1(u64 sctlr) +/* + * __switch_to() checks current->thread.sctlr_user as an optimisation. Therefore + * this function must be called with preemption disabled and the update to + * sctlr_user must be made in the same preemption disabled block so that + * __switch_to() does not see the variable update before the SCTLR_EL1 one. + */ +void update_sctlr_el1(u64 sctlr) { /* * EnIA must not be cleared while in the kernel as this is necessary for @@ -489,19 +488,6 @@ static void update_sctlr_el1(u64 sctlr) isb(); } -void set_task_sctlr_el1(u64 sctlr) -{ - /* - * __switch_to() checks current->thread.sctlr as an - * optimisation. Disable preemption so that it does not see - * the variable update before the SCTLR_EL1 one. - */ - preempt_disable(); - current->thread.sctlr_user = sctlr; - update_sctlr_el1(sctlr); - preempt_enable(); -} - /* * Thread switching. */ @@ -518,7 +504,6 @@ __notrace_funcgraph struct task_struct *__switch_to(struct task_struct *prev, ssbs_thread_switch(next); erratum_1418040_thread_switch(prev, next); ptrauth_thread_switch_user(next); - compat_thread_switch(next); /* * Complete any pending TLB or cache maintenance on this CPU in case @@ -579,6 +564,28 @@ unsigned long arch_align_stack(unsigned long sp) return sp & ~0xf; } +#ifdef CONFIG_COMPAT +int compat_elf_check_arch(const struct elf32_hdr *hdr) +{ + if (!system_supports_32bit_el0()) + return false; + + if ((hdr)->e_machine != EM_ARM) + return false; + + if (!((hdr)->e_flags & EF_ARM_EABI_MASK)) + return false; + + /* + * Prevent execve() of a 32-bit program from a deadline task + * if the restricted affinity mask would be inadmissible on an + * asymmetric system. + */ + return !static_branch_unlikely(&arm64_mismatched_32bit_el0) || + !dl_task_check_affinity(current, system_32bit_el0_cpumask()); +} +#endif + /* * Called from setup_new_exec() after (COMPAT_)SET_PERSONALITY. */ @@ -588,8 +595,20 @@ void arch_setup_new_exec(void) if (is_compat_task()) { mmflags = MMCF_AARCH32; + + /* + * Restrict the CPU affinity mask for a 32-bit task so that + * it contains only 32-bit-capable CPUs. + * + * From the perspective of the task, this looks similar to + * what would happen if the 64-bit-only CPUs were hot-unplugged + * at the point of execve(), although we try a bit harder to + * honour the cpuset hierarchy. + */ if (static_branch_unlikely(&arm64_mismatched_32bit_el0)) - set_tsk_thread_flag(current, TIF_NOTIFY_RESUME); + force_compatible_cpus_allowed_ptr(current); + } else if (static_branch_unlikely(&arm64_mismatched_32bit_el0)) { + relax_compatible_cpus_allowed_ptr(current); } current->mm->context.flags = mmflags; diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 499b6b2f9757..e26196a33cf4 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -845,6 +845,11 @@ static int sve_set(struct task_struct *target, } sve_alloc(target); + if (!target->thread.sve_state) { + ret = -ENOMEM; + clear_tsk_thread_flag(target, TIF_SVE); + goto out; + } /* * Ensure target->thread.sve_state is up to date with target's @@ -1862,7 +1867,7 @@ void syscall_trace_exit(struct pt_regs *regs) audit_syscall_exit(regs); if (flags & _TIF_SYSCALL_TRACEPOINT) - trace_sys_exit(regs, regs_return_value(regs)); + trace_sys_exit(regs, syscall_get_return_value(current, regs)); if (flags & (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP)) tracehook_report_syscall(regs, PTRACE_SYSCALL_EXIT); diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c index f8192f4ae0b8..9fe70b12b34f 100644 --- a/arch/arm64/kernel/signal.c +++ b/arch/arm64/kernel/signal.c @@ -29,6 +29,7 @@ #include <asm/unistd.h> #include <asm/fpsimd.h> #include <asm/ptrace.h> +#include <asm/syscall.h> #include <asm/signal32.h> #include <asm/traps.h> #include <asm/vdso.h> @@ -289,6 +290,11 @@ static int restore_sve_fpsimd_context(struct user_ctxs *user) /* From now, fpsimd_thread_switch() won't touch thread.sve_state */ sve_alloc(current); + if (!current->thread.sve_state) { + clear_thread_flag(TIF_SVE); + return -ENOMEM; + } + err = __copy_from_user(current->thread.sve_state, (char __user const *)user->sve + SVE_SIG_REGS_OFFSET, @@ -890,7 +896,7 @@ static void do_signal(struct pt_regs *regs) retval == -ERESTART_RESTARTBLOCK || (retval == -ERESTARTSYS && !(ksig.ka.sa.sa_flags & SA_RESTART)))) { - regs->regs[0] = -EINTR; + syscall_set_return_value(current, regs, -EINTR, 0); regs->pc = continue_addr; } @@ -911,21 +917,7 @@ static void do_signal(struct pt_regs *regs) restore_saved_sigmask(); } -static bool cpu_affinity_invalid(struct pt_regs *regs) -{ - if (!compat_user_mode(regs)) - return false; - - /* - * We're preemptible, but a reschedule will cause us to check the - * affinity again. - */ - return !cpumask_test_cpu(raw_smp_processor_id(), - system_32bit_el0_cpumask()); -} - -asmlinkage void do_notify_resume(struct pt_regs *regs, - unsigned long thread_flags) +void do_notify_resume(struct pt_regs *regs, unsigned long thread_flags) { do { if (thread_flags & _TIF_NEED_RESCHED) { @@ -951,19 +943,6 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, if (thread_flags & _TIF_NOTIFY_RESUME) { tracehook_notify_resume(regs); rseq_handle_notify_resume(NULL, regs); - - /* - * If we reschedule after checking the affinity - * then we must ensure that TIF_NOTIFY_RESUME - * is set so that we check the affinity again. - * Since tracehook_notify_resume() clears the - * flag, ensure that the compiler doesn't move - * it after the affinity check. - */ - barrier(); - - if (cpu_affinity_invalid(regs)) - force_sig(SIGKILL); } if (thread_flags & _TIF_FOREIGN_FPSTATE) @@ -999,3 +978,42 @@ void __init minsigstksz_setup(void) round_up(sizeof(struct frame_record), 16) + 16; /* max alignment padding */ } + +/* + * Compile-time assertions for siginfo_t offsets. Check NSIG* as well, as + * changes likely come with new fields that should be added below. + */ +static_assert(NSIGILL == 11); +static_assert(NSIGFPE == 15); +static_assert(NSIGSEGV == 9); +static_assert(NSIGBUS == 5); +static_assert(NSIGTRAP == 6); +static_assert(NSIGCHLD == 6); +static_assert(NSIGSYS == 2); +static_assert(sizeof(siginfo_t) == 128); +static_assert(__alignof__(siginfo_t) == 8); +static_assert(offsetof(siginfo_t, si_signo) == 0x00); +static_assert(offsetof(siginfo_t, si_errno) == 0x04); +static_assert(offsetof(siginfo_t, si_code) == 0x08); +static_assert(offsetof(siginfo_t, si_pid) == 0x10); +static_assert(offsetof(siginfo_t, si_uid) == 0x14); +static_assert(offsetof(siginfo_t, si_tid) == 0x10); +static_assert(offsetof(siginfo_t, si_overrun) == 0x14); +static_assert(offsetof(siginfo_t, si_status) == 0x18); +static_assert(offsetof(siginfo_t, si_utime) == 0x20); +static_assert(offsetof(siginfo_t, si_stime) == 0x28); +static_assert(offsetof(siginfo_t, si_value) == 0x18); +static_assert(offsetof(siginfo_t, si_int) == 0x18); +static_assert(offsetof(siginfo_t, si_ptr) == 0x18); +static_assert(offsetof(siginfo_t, si_addr) == 0x10); +static_assert(offsetof(siginfo_t, si_addr_lsb) == 0x18); +static_assert(offsetof(siginfo_t, si_lower) == 0x20); +static_assert(offsetof(siginfo_t, si_upper) == 0x28); +static_assert(offsetof(siginfo_t, si_pkey) == 0x20); +static_assert(offsetof(siginfo_t, si_perf_data) == 0x18); +static_assert(offsetof(siginfo_t, si_perf_type) == 0x20); +static_assert(offsetof(siginfo_t, si_band) == 0x10); +static_assert(offsetof(siginfo_t, si_fd) == 0x18); +static_assert(offsetof(siginfo_t, si_call_addr) == 0x10); +static_assert(offsetof(siginfo_t, si_syscall) == 0x18); +static_assert(offsetof(siginfo_t, si_arch) == 0x1c); diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c index 2f507f565c48..d984282b979f 100644 --- a/arch/arm64/kernel/signal32.c +++ b/arch/arm64/kernel/signal32.c @@ -46,8 +46,6 @@ struct compat_aux_sigframe { unsigned long end_magic; } __attribute__((__aligned__(8))); -#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) - static inline int put_sigset_t(compat_sigset_t __user *uset, sigset_t *set) { compat_sigset_t cset; @@ -190,10 +188,8 @@ static int compat_restore_sigframe(struct pt_regs *regs, unsigned long psr; err = get_sigset_t(&set, &sf->uc.uc_sigmask); - if (err == 0) { - sigdelsetmask(&set, ~_BLOCKABLE); + if (err == 0) set_current_blocked(&set); - } __get_user_error(regs->regs[0], &sf->uc.uc_mcontext.arm_r0, err); __get_user_error(regs->regs[1], &sf->uc.uc_mcontext.arm_r1, err); @@ -457,3 +453,42 @@ void compat_setup_restart_syscall(struct pt_regs *regs) { regs->regs[7] = __NR_compat_restart_syscall; } + +/* + * Compile-time assertions for siginfo_t offsets. Check NSIG* as well, as + * changes likely come with new fields that should be added below. + */ +static_assert(NSIGILL == 11); +static_assert(NSIGFPE == 15); +static_assert(NSIGSEGV == 9); +static_assert(NSIGBUS == 5); +static_assert(NSIGTRAP == 6); +static_assert(NSIGCHLD == 6); +static_assert(NSIGSYS == 2); +static_assert(sizeof(compat_siginfo_t) == 128); +static_assert(__alignof__(compat_siginfo_t) == 4); +static_assert(offsetof(compat_siginfo_t, si_signo) == 0x00); +static_assert(offsetof(compat_siginfo_t, si_errno) == 0x04); +static_assert(offsetof(compat_siginfo_t, si_code) == 0x08); +static_assert(offsetof(compat_siginfo_t, si_pid) == 0x0c); +static_assert(offsetof(compat_siginfo_t, si_uid) == 0x10); +static_assert(offsetof(compat_siginfo_t, si_tid) == 0x0c); +static_assert(offsetof(compat_siginfo_t, si_overrun) == 0x10); +static_assert(offsetof(compat_siginfo_t, si_status) == 0x14); +static_assert(offsetof(compat_siginfo_t, si_utime) == 0x18); +static_assert(offsetof(compat_siginfo_t, si_stime) == 0x1c); +static_assert(offsetof(compat_siginfo_t, si_value) == 0x14); +static_assert(offsetof(compat_siginfo_t, si_int) == 0x14); +static_assert(offsetof(compat_siginfo_t, si_ptr) == 0x14); +static_assert(offsetof(compat_siginfo_t, si_addr) == 0x0c); +static_assert(offsetof(compat_siginfo_t, si_addr_lsb) == 0x10); +static_assert(offsetof(compat_siginfo_t, si_lower) == 0x14); +static_assert(offsetof(compat_siginfo_t, si_upper) == 0x18); +static_assert(offsetof(compat_siginfo_t, si_pkey) == 0x14); +static_assert(offsetof(compat_siginfo_t, si_perf_data) == 0x10); +static_assert(offsetof(compat_siginfo_t, si_perf_type) == 0x14); +static_assert(offsetof(compat_siginfo_t, si_band) == 0x0c); +static_assert(offsetof(compat_siginfo_t, si_fd) == 0x10); +static_assert(offsetof(compat_siginfo_t, si_call_addr) == 0x0c); +static_assert(offsetof(compat_siginfo_t, si_syscall) == 0x10); +static_assert(offsetof(compat_siginfo_t, si_arch) == 0x14); diff --git a/arch/arm64/kernel/smccc-call.S b/arch/arm64/kernel/smccc-call.S index d3d37f932b97..487381164ff6 100644 --- a/arch/arm64/kernel/smccc-call.S +++ b/arch/arm64/kernel/smccc-call.S @@ -32,20 +32,23 @@ SYM_FUNC_END(__arm_smccc_sve_check) EXPORT_SYMBOL(__arm_smccc_sve_check) .macro SMCCC instr + stp x29, x30, [sp, #-16]! + mov x29, sp alternative_if ARM64_SVE bl __arm_smccc_sve_check alternative_else_nop_endif \instr #0 - ldr x4, [sp] + ldr x4, [sp, #16] stp x0, x1, [x4, #ARM_SMCCC_RES_X0_OFFS] stp x2, x3, [x4, #ARM_SMCCC_RES_X2_OFFS] - ldr x4, [sp, #8] + ldr x4, [sp, #24] cbz x4, 1f /* no quirk structure */ ldr x9, [x4, #ARM_SMCCC_QUIRK_ID_OFFS] cmp x9, #ARM_SMCCC_QUIRK_QCOM_A6 b.ne 1f str x6, [x4, ARM_SMCCC_QUIRK_STATE_OFFS] -1: ret +1: ldp x29, x30, [sp], #16 + ret .endm /* diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c index b83c8d911930..8982a2b78acf 100644 --- a/arch/arm64/kernel/stacktrace.c +++ b/arch/arm64/kernel/stacktrace.c @@ -218,7 +218,7 @@ void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl) #ifdef CONFIG_STACKTRACE -noinline void arch_stack_walk(stack_trace_consume_fn consume_entry, +noinline notrace void arch_stack_walk(stack_trace_consume_fn consume_entry, void *cookie, struct task_struct *task, struct pt_regs *regs) { diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c index 938ce6fbee8a..19ee7c33769d 100644 --- a/arch/arm64/kernel/suspend.c +++ b/arch/arm64/kernel/suspend.c @@ -76,7 +76,6 @@ void notrace __cpu_suspend_exit(void) spectre_v4_enable_mitigation(NULL); /* Restore additional feature-specific configuration */ - mte_suspend_exit(); ptrauth_suspend_exit(); } diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c index 263d6c1a525f..50a0f1a38e84 100644 --- a/arch/arm64/kernel/syscall.c +++ b/arch/arm64/kernel/syscall.c @@ -54,10 +54,7 @@ static void invoke_syscall(struct pt_regs *regs, unsigned int scno, ret = do_ni_syscall(regs, scno); } - if (is_compat_task()) - ret = lower_32_bits(ret); - - regs->regs[0] = ret; + syscall_set_return_value(current, regs, 0, ret); /* * Ultimately, this value will get limited by KSTACK_OFFSET_MAX(), @@ -115,7 +112,7 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr, * syscall. do_notify_resume() will send a signal to userspace * before the syscall is restarted. */ - regs->regs[0] = -ERESTARTNOINTR; + syscall_set_return_value(current, regs, -ERESTARTNOINTR, 0); return; } @@ -136,7 +133,7 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr, * anyway. */ if (scno == NO_SYSCALL) - regs->regs[0] = -ENOSYS; + syscall_set_return_value(current, regs, -ENOSYS, 0); scno = syscall_trace_enter(regs); if (scno == NO_SYSCALL) goto trace_exit; diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S index 709d2c433c5e..f6b1a88245db 100644 --- a/arch/arm64/kernel/vmlinux.lds.S +++ b/arch/arm64/kernel/vmlinux.lds.S @@ -181,6 +181,8 @@ SECTIONS /* everything from this point to __init_begin will be marked RO NX */ RO_DATA(PAGE_SIZE) + HYPERVISOR_DATA_SECTIONS + idmap_pg_dir = .; . += IDMAP_DIR_SIZE; idmap_pg_end = .; @@ -260,8 +262,6 @@ SECTIONS _sdata = .; RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_ALIGN) - HYPERVISOR_DATA_SECTIONS - /* * Data written with the MMU off but read with the MMU on requires * cache lines to be invalidated, discarding up to a Cache Writeback diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig index a4eba0908bfa..d7eec0b43744 100644 --- a/arch/arm64/kvm/Kconfig +++ b/arch/arm64/kvm/Kconfig @@ -26,6 +26,7 @@ menuconfig KVM select HAVE_KVM_ARCH_TLB_FLUSH_ALL select KVM_MMIO select KVM_GENERIC_DIRTYLOG_READ_PROTECT + select KVM_XFER_TO_GUEST_WORK select SRCU select KVM_VFIO select HAVE_KVM_EVENTFD @@ -46,6 +47,15 @@ if KVM source "virt/kvm/Kconfig" +config NVHE_EL2_DEBUG + bool "Debug mode for non-VHE EL2 object" + help + Say Y here to enable the debug mode for the non-VHE KVM EL2 object. + Failure reports will BUG() in the hypervisor. This is intended for + local EL2 hypervisor development. + + If unsure, say N. + endif # KVM endif # VIRTUALIZATION diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index e9a2b8f27792..fe102cd2e518 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -6,6 +6,7 @@ #include <linux/bug.h> #include <linux/cpu_pm.h> +#include <linux/entry-kvm.h> #include <linux/errno.h> #include <linux/err.h> #include <linux/kvm_host.h> @@ -15,6 +16,7 @@ #include <linux/fs.h> #include <linux/mman.h> #include <linux/sched.h> +#include <linux/kmemleak.h> #include <linux/kvm.h> #include <linux/kvm_irqfd.h> #include <linux/irqbypass.h> @@ -42,10 +44,6 @@ #include <kvm/arm_pmu.h> #include <kvm/arm_psci.h> -#ifdef REQUIRES_VIRT -__asm__(".arch_extension virt"); -#endif - static enum kvm_mode kvm_mode = KVM_MODE_DEFAULT; DEFINE_STATIC_KEY_FALSE(kvm_protected_mode_initialized); @@ -94,10 +92,14 @@ int kvm_vm_ioctl_enable_cap(struct kvm *kvm, kvm->arch.return_nisv_io_abort_to_user = true; break; case KVM_CAP_ARM_MTE: - if (!system_supports_mte() || kvm->created_vcpus) - return -EINVAL; - r = 0; - kvm->arch.mte_enabled = true; + mutex_lock(&kvm->lock); + if (!system_supports_mte() || kvm->created_vcpus) { + r = -EINVAL; + } else { + r = 0; + kvm->arch.mte_enabled = true; + } + mutex_unlock(&kvm->lock); break; default: r = -EINVAL; @@ -571,7 +573,7 @@ static void update_vmid(struct kvm_vmid *vmid) kvm_call_hyp(__kvm_flush_vm_context); } - vmid->vmid = kvm_next_vmid; + WRITE_ONCE(vmid->vmid, kvm_next_vmid); kvm_next_vmid++; kvm_next_vmid &= (1 << kvm_get_vmid_bits()) - 1; @@ -715,6 +717,45 @@ static bool vcpu_mode_is_bad_32bit(struct kvm_vcpu *vcpu) } /** + * kvm_vcpu_exit_request - returns true if the VCPU should *not* enter the guest + * @vcpu: The VCPU pointer + * @ret: Pointer to write optional return code + * + * Returns: true if the VCPU needs to return to a preemptible + interruptible + * and skip guest entry. + * + * This function disambiguates between two different types of exits: exits to a + * preemptible + interruptible kernel context and exits to userspace. For an + * exit to userspace, this function will write the return code to ret and return + * true. For an exit to preemptible + interruptible kernel context (i.e. check + * for pending work and re-enter), return true without writing to ret. + */ +static bool kvm_vcpu_exit_request(struct kvm_vcpu *vcpu, int *ret) +{ + struct kvm_run *run = vcpu->run; + + /* + * If we're using a userspace irqchip, then check if we need + * to tell a userspace irqchip about timer or PMU level + * changes and if so, exit to userspace (the actual level + * state gets updated in kvm_timer_update_run and + * kvm_pmu_update_run below). + */ + if (static_branch_unlikely(&userspace_irqchip_in_use)) { + if (kvm_timer_should_notify_user(vcpu) || + kvm_pmu_should_notify_user(vcpu)) { + *ret = -EINTR; + run->exit_reason = KVM_EXIT_INTR; + return true; + } + } + + return kvm_request_pending(vcpu) || + need_new_vmid_gen(&vcpu->arch.hw_mmu->vmid) || + xfer_to_guest_mode_work_pending(); +} + +/** * kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code * @vcpu: The VCPU pointer * @@ -757,7 +798,9 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu) /* * Check conditions before entering the guest */ - cond_resched(); + ret = xfer_to_guest_mode_handle_work(vcpu); + if (!ret) + ret = 1; update_vmid(&vcpu->arch.hw_mmu->vmid); @@ -777,30 +820,6 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu) kvm_vgic_flush_hwstate(vcpu); /* - * Exit if we have a signal pending so that we can deliver the - * signal to user space. - */ - if (signal_pending(current)) { - ret = -EINTR; - run->exit_reason = KVM_EXIT_INTR; - } - - /* - * If we're using a userspace irqchip, then check if we need - * to tell a userspace irqchip about timer or PMU level - * changes and if so, exit to userspace (the actual level - * state gets updated in kvm_timer_update_run and - * kvm_pmu_update_run below). - */ - if (static_branch_unlikely(&userspace_irqchip_in_use)) { - if (kvm_timer_should_notify_user(vcpu) || - kvm_pmu_should_notify_user(vcpu)) { - ret = -EINTR; - run->exit_reason = KVM_EXIT_INTR; - } - } - - /* * Ensure we set mode to IN_GUEST_MODE after we disable * interrupts and before the final VCPU requests check. * See the comment in kvm_vcpu_exiting_guest_mode() and @@ -808,8 +827,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu) */ smp_store_mb(vcpu->mode, IN_GUEST_MODE); - if (ret <= 0 || need_new_vmid_gen(&vcpu->arch.hw_mmu->vmid) || - kvm_request_pending(vcpu)) { + if (ret <= 0 || kvm_vcpu_exit_request(vcpu, &ret)) { vcpu->mode = OUTSIDE_GUEST_MODE; isb(); /* Ensure work in x_flush_hwstate is committed */ kvm_pmu_sync_hwstate(vcpu); @@ -1035,7 +1053,7 @@ static int kvm_vcpu_set_target(struct kvm_vcpu *vcpu, const struct kvm_vcpu_init *init) { unsigned int i, ret; - int phys_target = kvm_target_cpu(); + u32 phys_target = kvm_target_cpu(); if (init->target != phys_target) return -EINVAL; @@ -1104,6 +1122,7 @@ static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu, } vcpu_reset_hcr(vcpu); + vcpu->arch.cptr_el2 = CPTR_EL2_DEFAULT; /* * Handle the "start in power-off" case. @@ -1215,6 +1234,14 @@ long kvm_arch_vcpu_ioctl(struct file *filp, if (copy_from_user(®, argp, sizeof(reg))) break; + /* + * We could owe a reset due to PSCI. Handle the pending reset + * here to ensure userspace register accesses are ordered after + * the reset. + */ + if (kvm_check_request(KVM_REQ_VCPU_RESET, vcpu)) + kvm_reset_vcpu(vcpu); + if (ioctl == KVM_SET_ONE_REG) r = kvm_arm_set_reg(vcpu, ®); else @@ -1696,11 +1723,6 @@ static bool init_psci_relay(void) return true; } -static int init_common_resources(void) -{ - return kvm_set_ipa_limit(); -} - static int init_subsystems(void) { int err = 0; @@ -1954,56 +1976,17 @@ static void _kvm_host_prot_finalize(void *discard) WARN_ON(kvm_call_hyp_nvhe(__pkvm_prot_finalize)); } -static inline int pkvm_mark_hyp(phys_addr_t start, phys_addr_t end) -{ - return kvm_call_hyp_nvhe(__pkvm_mark_hyp, start, end); -} - -#define pkvm_mark_hyp_section(__section) \ - pkvm_mark_hyp(__pa_symbol(__section##_start), \ - __pa_symbol(__section##_end)) - static int finalize_hyp_mode(void) { - int cpu, ret; - if (!is_protected_kvm_enabled()) return 0; - ret = pkvm_mark_hyp_section(__hyp_idmap_text); - if (ret) - return ret; - - ret = pkvm_mark_hyp_section(__hyp_text); - if (ret) - return ret; - - ret = pkvm_mark_hyp_section(__hyp_rodata); - if (ret) - return ret; - - ret = pkvm_mark_hyp_section(__hyp_bss); - if (ret) - return ret; - - ret = pkvm_mark_hyp(hyp_mem_base, hyp_mem_base + hyp_mem_size); - if (ret) - return ret; - - for_each_possible_cpu(cpu) { - phys_addr_t start = virt_to_phys((void *)kvm_arm_hyp_percpu_base[cpu]); - phys_addr_t end = start + (PAGE_SIZE << nvhe_percpu_order()); - - ret = pkvm_mark_hyp(start, end); - if (ret) - return ret; - - start = virt_to_phys((void *)per_cpu(kvm_arm_hyp_stack_page, cpu)); - end = start + PAGE_SIZE; - ret = pkvm_mark_hyp(start, end); - if (ret) - return ret; - } + /* + * Exclude HYP BSS from kmemleak so that it doesn't get peeked + * at, which would end badly once the section is inaccessible. + * None of other sections should ever be introspected. + */ + kmemleak_free_part(__hyp_bss_start, __hyp_bss_end - __hyp_bss_start); /* * Flip the static key upfront as that may no longer be possible @@ -2015,11 +1998,6 @@ static int finalize_hyp_mode(void) return 0; } -static void check_kvm_target_cpu(void *ret) -{ - *(int *)ret = kvm_target_cpu(); -} - struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr) { struct kvm_vcpu *vcpu; @@ -2079,7 +2057,6 @@ void kvm_arch_irq_bypass_start(struct irq_bypass_consumer *cons) int kvm_arch_init(void *opaque) { int err; - int ret, cpu; bool in_hyp_mode; if (!is_hyp_mode_available()) { @@ -2094,15 +2071,7 @@ int kvm_arch_init(void *opaque) kvm_info("Guests without required CPU erratum workarounds can deadlock system!\n" \ "Only trusted guests should be used on this system.\n"); - for_each_online_cpu(cpu) { - smp_call_function_single(cpu, check_kvm_target_cpu, &ret, 1); - if (ret < 0) { - kvm_err("Error, CPU %d not supported!\n", cpu); - return -ENODEV; - } - } - - err = init_common_resources(); + err = kvm_set_ipa_limit(); if (err) return err; diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c index d5e79d7ee6e9..db9361338b2a 100644 --- a/arch/arm64/kvm/debug.c +++ b/arch/arm64/kvm/debug.c @@ -21,7 +21,7 @@ DBG_MDSCR_KDE | \ DBG_MDSCR_MDE) -static DEFINE_PER_CPU(u32, mdcr_el2); +static DEFINE_PER_CPU(u64, mdcr_el2); /** * save/restore_guest_debug_regs diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c index 1dfb83578277..5ce26bedf23c 100644 --- a/arch/arm64/kvm/guest.c +++ b/arch/arm64/kvm/guest.c @@ -31,8 +31,6 @@ const struct _kvm_stats_desc kvm_vm_stats_desc[] = { KVM_GENERIC_VM_STATS() }; -static_assert(ARRAY_SIZE(kvm_vm_stats_desc) == - sizeof(struct kvm_vm_stat) / sizeof(u64)); const struct kvm_stats_header kvm_vm_stats_header = { .name_size = KVM_STATS_NAME_SIZE, @@ -50,10 +48,9 @@ const struct _kvm_stats_desc kvm_vcpu_stats_desc[] = { STATS_DESC_COUNTER(VCPU, wfi_exit_stat), STATS_DESC_COUNTER(VCPU, mmio_exit_user), STATS_DESC_COUNTER(VCPU, mmio_exit_kernel), + STATS_DESC_COUNTER(VCPU, signal_exits), STATS_DESC_COUNTER(VCPU, exits) }; -static_assert(ARRAY_SIZE(kvm_vcpu_stats_desc) == - sizeof(struct kvm_vcpu_stat) / sizeof(u64)); const struct kvm_stats_header kvm_vcpu_stats_header = { .name_size = KVM_STATS_NAME_SIZE, @@ -842,7 +839,7 @@ int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu, return 0; } -int __attribute_const__ kvm_target_cpu(void) +u32 __attribute_const__ kvm_target_cpu(void) { unsigned long implementor = read_cpuid_implementor(); unsigned long part_number = read_cpuid_part_number(); @@ -874,7 +871,7 @@ int __attribute_const__ kvm_target_cpu(void) int kvm_vcpu_preferred_target(struct kvm_vcpu_init *init) { - int target = kvm_target_cpu(); + u32 target = kvm_target_cpu(); if (target < 0) return -ENODEV; diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c index 6f48336b1d86..275a27368a04 100644 --- a/arch/arm64/kvm/handle_exit.c +++ b/arch/arm64/kvm/handle_exit.c @@ -113,34 +113,20 @@ static int kvm_handle_wfx(struct kvm_vcpu *vcpu) * guest and host are using the same debug facilities it will be up to * userspace to re-inject the correct exception for guest delivery. * - * @return: 0 (while setting vcpu->run->exit_reason), -1 for error + * @return: 0 (while setting vcpu->run->exit_reason) */ static int kvm_handle_guest_debug(struct kvm_vcpu *vcpu) { struct kvm_run *run = vcpu->run; u32 esr = kvm_vcpu_get_esr(vcpu); - int ret = 0; run->exit_reason = KVM_EXIT_DEBUG; run->debug.arch.hsr = esr; - switch (ESR_ELx_EC(esr)) { - case ESR_ELx_EC_WATCHPT_LOW: + if (ESR_ELx_EC(esr) == ESR_ELx_EC_WATCHPT_LOW) run->debug.arch.far = vcpu->arch.fault.far_el2; - fallthrough; - case ESR_ELx_EC_SOFTSTP_LOW: - case ESR_ELx_EC_BREAKPT_LOW: - case ESR_ELx_EC_BKPT32: - case ESR_ELx_EC_BRK64: - break; - default: - kvm_err("%s: un-handled case esr: %#08x\n", - __func__, (unsigned int) esr); - ret = -1; - break; - } - return ret; + return 0; } static int kvm_handle_unknown_ec(struct kvm_vcpu *vcpu) @@ -292,11 +278,12 @@ void handle_exit_early(struct kvm_vcpu *vcpu, int exception_index) kvm_handle_guest_serror(vcpu, kvm_vcpu_get_esr(vcpu)); } -void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr, u64 elr, +void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr, + u64 elr_virt, u64 elr_phys, u64 par, uintptr_t vcpu, u64 far, u64 hpfar) { - u64 elr_in_kimg = __phys_to_kimg(__hyp_pa(elr)); - u64 hyp_offset = elr_in_kimg - kaslr_offset() - elr; + u64 elr_in_kimg = __phys_to_kimg(elr_phys); + u64 hyp_offset = elr_in_kimg - kaslr_offset() - elr_virt; u64 mode = spsr & PSR_MODE_MASK; /* @@ -309,20 +296,24 @@ void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr, u64 elr, kvm_err("Invalid host exception to nVHE hyp!\n"); } else if (ESR_ELx_EC(esr) == ESR_ELx_EC_BRK64 && (esr & ESR_ELx_BRK64_ISS_COMMENT_MASK) == BUG_BRK_IMM) { - struct bug_entry *bug = find_bug(elr_in_kimg); const char *file = NULL; unsigned int line = 0; /* All hyp bugs, including warnings, are treated as fatal. */ - if (bug) - bug_get_file_line(bug, &file, &line); + if (!is_protected_kvm_enabled() || + IS_ENABLED(CONFIG_NVHE_EL2_DEBUG)) { + struct bug_entry *bug = find_bug(elr_in_kimg); + + if (bug) + bug_get_file_line(bug, &file, &line); + } if (file) kvm_err("nVHE hyp BUG at: %s:%u!\n", file, line); else - kvm_err("nVHE hyp BUG at: %016llx!\n", elr + hyp_offset); + kvm_err("nVHE hyp BUG at: %016llx!\n", elr_virt + hyp_offset); } else { - kvm_err("nVHE hyp panic at: %016llx!\n", elr + hyp_offset); + kvm_err("nVHE hyp panic at: %016llx!\n", elr_virt + hyp_offset); } /* @@ -334,5 +325,5 @@ void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr, u64 elr, kvm_err("Hyp Offset: 0x%llx\n", hyp_offset); panic("HYP panic:\nPS:%08llx PC:%016llx ESR:%08llx\nFAR:%016llx HPFAR:%016llx PAR:%016llx\nVCPU:%016lx\n", - spsr, elr, esr, far, hpfar, par, vcpu); + spsr, elr_virt, esr, far, hpfar, par, vcpu); } diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h index e4a2f295a394..a0e78a6027be 100644 --- a/arch/arm64/kvm/hyp/include/hyp/switch.h +++ b/arch/arm64/kvm/hyp/include/hyp/switch.h @@ -92,11 +92,15 @@ static inline void __activate_traps_common(struct kvm_vcpu *vcpu) write_sysreg(0, pmselr_el0); write_sysreg(ARMV8_PMU_USERENR_MASK, pmuserenr_el0); } + + vcpu->arch.mdcr_el2_host = read_sysreg(mdcr_el2); write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2); } -static inline void __deactivate_traps_common(void) +static inline void __deactivate_traps_common(struct kvm_vcpu *vcpu) { + write_sysreg(vcpu->arch.mdcr_el2_host, mdcr_el2); + write_sysreg(0, hstr_el2); if (kvm_arm_support_pmu_v3()) write_sysreg(0, pmuserenr_el0); diff --git a/arch/arm64/kvm/hyp/include/nvhe/mem_protect.h b/arch/arm64/kvm/hyp/include/nvhe/mem_protect.h index 9c227d87c36d..b58c910babaf 100644 --- a/arch/arm64/kvm/hyp/include/nvhe/mem_protect.h +++ b/arch/arm64/kvm/hyp/include/nvhe/mem_protect.h @@ -12,6 +12,32 @@ #include <asm/virt.h> #include <nvhe/spinlock.h> +/* + * SW bits 0-1 are reserved to track the memory ownership state of each page: + * 00: The page is owned exclusively by the page-table owner. + * 01: The page is owned by the page-table owner, but is shared + * with another entity. + * 10: The page is shared with, but not owned by the page-table owner. + * 11: Reserved for future use (lending). + */ +enum pkvm_page_state { + PKVM_PAGE_OWNED = 0ULL, + PKVM_PAGE_SHARED_OWNED = KVM_PGTABLE_PROT_SW0, + PKVM_PAGE_SHARED_BORROWED = KVM_PGTABLE_PROT_SW1, +}; + +#define PKVM_PAGE_STATE_PROT_MASK (KVM_PGTABLE_PROT_SW0 | KVM_PGTABLE_PROT_SW1) +static inline enum kvm_pgtable_prot pkvm_mkstate(enum kvm_pgtable_prot prot, + enum pkvm_page_state state) +{ + return (prot & ~PKVM_PAGE_STATE_PROT_MASK) | state; +} + +static inline enum pkvm_page_state pkvm_getstate(enum kvm_pgtable_prot prot) +{ + return prot & PKVM_PAGE_STATE_PROT_MASK; +} + struct host_kvm { struct kvm_arch arch; struct kvm_pgtable pgt; @@ -20,16 +46,21 @@ struct host_kvm { }; extern struct host_kvm host_kvm; +extern const u8 pkvm_hyp_id; + int __pkvm_prot_finalize(void); -int __pkvm_mark_hyp(phys_addr_t start, phys_addr_t end); +int __pkvm_host_share_hyp(u64 pfn); +bool addr_is_memory(phys_addr_t phys); +int host_stage2_idmap_locked(phys_addr_t addr, u64 size, enum kvm_pgtable_prot prot); +int host_stage2_set_owner_locked(phys_addr_t addr, u64 size, u8 owner_id); int kvm_host_prepare_stage2(void *pgt_pool_base); void handle_host_mem_abort(struct kvm_cpu_context *host_ctxt); static __always_inline void __load_host_stage2(void) { if (static_branch_likely(&kvm_protected_mode_initialized)) - __load_stage2(&host_kvm.arch.mmu, host_kvm.arch.vtcr); + __load_stage2(&host_kvm.arch.mmu, &host_kvm.arch); else write_sysreg(0, vttbr_el2); } diff --git a/arch/arm64/kvm/hyp/include/nvhe/mm.h b/arch/arm64/kvm/hyp/include/nvhe/mm.h index 8ec3a5a7744b..c9a8f535212e 100644 --- a/arch/arm64/kvm/hyp/include/nvhe/mm.h +++ b/arch/arm64/kvm/hyp/include/nvhe/mm.h @@ -23,8 +23,7 @@ int hyp_map_vectors(void); int hyp_back_vmemmap(phys_addr_t phys, unsigned long size, phys_addr_t back); int pkvm_cpu_set_vector(enum arm64_hyp_spectre_vector slot); int pkvm_create_mappings(void *from, void *to, enum kvm_pgtable_prot prot); -int __pkvm_create_mappings(unsigned long start, unsigned long size, - unsigned long phys, enum kvm_pgtable_prot prot); +int pkvm_create_mappings_locked(void *from, void *to, enum kvm_pgtable_prot prot); unsigned long __pkvm_create_private_mapping(phys_addr_t phys, size_t size, enum kvm_pgtable_prot prot); diff --git a/arch/arm64/kvm/hyp/include/nvhe/spinlock.h b/arch/arm64/kvm/hyp/include/nvhe/spinlock.h index 76b537f8d1c6..4652fd04bdbe 100644 --- a/arch/arm64/kvm/hyp/include/nvhe/spinlock.h +++ b/arch/arm64/kvm/hyp/include/nvhe/spinlock.h @@ -15,6 +15,7 @@ #include <asm/alternative.h> #include <asm/lse.h> +#include <asm/rwonce.h> typedef union hyp_spinlock { u32 __val; @@ -89,4 +90,28 @@ static inline void hyp_spin_unlock(hyp_spinlock_t *lock) : "memory"); } +static inline bool hyp_spin_is_locked(hyp_spinlock_t *lock) +{ + hyp_spinlock_t lockval = READ_ONCE(*lock); + + return lockval.owner != lockval.next; +} + +#ifdef CONFIG_NVHE_EL2_DEBUG +static inline void hyp_assert_lock_held(hyp_spinlock_t *lock) +{ + /* + * The __pkvm_init() path accesses protected data-structures without + * holding locks as the other CPUs are guaranteed to not enter EL2 + * concurrently at this point in time. The point by which EL2 is + * initialized on all CPUs is reflected in the pkvm static key, so + * wait until it is set before checking the lock state. + */ + if (static_branch_likely(&kvm_protected_mode_initialized)) + BUG_ON(!hyp_spin_is_locked(lock)); +} +#else +static inline void hyp_assert_lock_held(hyp_spinlock_t *lock) { } +#endif + #endif /* __ARM64_KVM_NVHE_SPINLOCK_H__ */ diff --git a/arch/arm64/kvm/hyp/nvhe/debug-sr.c b/arch/arm64/kvm/hyp/nvhe/debug-sr.c index 7d3f25868cae..df361d839902 100644 --- a/arch/arm64/kvm/hyp/nvhe/debug-sr.c +++ b/arch/arm64/kvm/hyp/nvhe/debug-sr.c @@ -109,7 +109,7 @@ void __debug_switch_to_host(struct kvm_vcpu *vcpu) __debug_switch_to_host_common(vcpu); } -u32 __kvm_get_mdcr_el2(void) +u64 __kvm_get_mdcr_el2(void) { return read_sysreg(mdcr_el2); } diff --git a/arch/arm64/kvm/hyp/nvhe/host.S b/arch/arm64/kvm/hyp/nvhe/host.S index 2b23400e0fb3..4b652ffb591d 100644 --- a/arch/arm64/kvm/hyp/nvhe/host.S +++ b/arch/arm64/kvm/hyp/nvhe/host.S @@ -7,6 +7,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/kvm_arm.h> #include <asm/kvm_asm.h> #include <asm/kvm_mmu.h> @@ -85,12 +86,24 @@ SYM_FUNC_START(__hyp_do_panic) mov x29, x0 +#ifdef CONFIG_NVHE_EL2_DEBUG + /* Ensure host stage-2 is disabled */ + mrs x0, hcr_el2 + bic x0, x0, #HCR_VM + msr hcr_el2, x0 + isb + tlbi vmalls12e1 + dsb nsh +#endif + /* Load the panic arguments into x0-7 */ mrs x0, esr_el2 - get_vcpu_ptr x4, x5 - mrs x5, far_el2 - mrs x6, hpfar_el2 - mov x7, xzr // Unused argument + mov x4, x3 + mov x3, x2 + hyp_pa x3, x6 + get_vcpu_ptr x5, x6 + mrs x6, far_el2 + mrs x7, hpfar_el2 /* Enter the host, conditionally restoring the host context. */ cbz x29, __host_enter_without_restoring diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-main.c b/arch/arm64/kvm/hyp/nvhe/hyp-main.c index 1632f001f4ed..2da6aa8da868 100644 --- a/arch/arm64/kvm/hyp/nvhe/hyp-main.c +++ b/arch/arm64/kvm/hyp/nvhe/hyp-main.c @@ -140,14 +140,11 @@ static void handle___pkvm_cpu_set_vector(struct kvm_cpu_context *host_ctxt) cpu_reg(host_ctxt, 1) = pkvm_cpu_set_vector(slot); } -static void handle___pkvm_create_mappings(struct kvm_cpu_context *host_ctxt) +static void handle___pkvm_host_share_hyp(struct kvm_cpu_context *host_ctxt) { - DECLARE_REG(unsigned long, start, host_ctxt, 1); - DECLARE_REG(unsigned long, size, host_ctxt, 2); - DECLARE_REG(unsigned long, phys, host_ctxt, 3); - DECLARE_REG(enum kvm_pgtable_prot, prot, host_ctxt, 4); + DECLARE_REG(u64, pfn, host_ctxt, 1); - cpu_reg(host_ctxt, 1) = __pkvm_create_mappings(start, size, phys, prot); + cpu_reg(host_ctxt, 1) = __pkvm_host_share_hyp(pfn); } static void handle___pkvm_create_private_mapping(struct kvm_cpu_context *host_ctxt) @@ -163,14 +160,6 @@ static void handle___pkvm_prot_finalize(struct kvm_cpu_context *host_ctxt) { cpu_reg(host_ctxt, 1) = __pkvm_prot_finalize(); } - -static void handle___pkvm_mark_hyp(struct kvm_cpu_context *host_ctxt) -{ - DECLARE_REG(phys_addr_t, start, host_ctxt, 1); - DECLARE_REG(phys_addr_t, end, host_ctxt, 2); - - cpu_reg(host_ctxt, 1) = __pkvm_mark_hyp(start, end); -} typedef void (*hcall_t)(struct kvm_cpu_context *); #define HANDLE_FUNC(x) [__KVM_HOST_SMCCC_FUNC_##x] = (hcall_t)handle_##x @@ -193,10 +182,9 @@ static const hcall_t host_hcall[] = { HANDLE_FUNC(__vgic_v3_restore_aprs), HANDLE_FUNC(__pkvm_init), HANDLE_FUNC(__pkvm_cpu_set_vector), - HANDLE_FUNC(__pkvm_create_mappings), + HANDLE_FUNC(__pkvm_host_share_hyp), HANDLE_FUNC(__pkvm_create_private_mapping), HANDLE_FUNC(__pkvm_prot_finalize), - HANDLE_FUNC(__pkvm_mark_hyp), }; static void handle_host_hcall(struct kvm_cpu_context *host_ctxt) diff --git a/arch/arm64/kvm/hyp/nvhe/mem_protect.c b/arch/arm64/kvm/hyp/nvhe/mem_protect.c index d938ce95d3bd..bacd493a4eac 100644 --- a/arch/arm64/kvm/hyp/nvhe/mem_protect.c +++ b/arch/arm64/kvm/hyp/nvhe/mem_protect.c @@ -31,7 +31,7 @@ static struct hyp_pool host_s2_pool; u64 id_aa64mmfr0_el1_sys_val; u64 id_aa64mmfr1_el1_sys_val; -static const u8 pkvm_hyp_id = 1; +const u8 pkvm_hyp_id = 1; static void *host_s2_zalloc_pages_exact(size_t size) { @@ -89,6 +89,8 @@ static void prepare_host_vtcr(void) id_aa64mmfr1_el1_sys_val, phys_shift); } +static bool host_stage2_force_pte_cb(u64 addr, u64 end, enum kvm_pgtable_prot prot); + int kvm_host_prepare_stage2(void *pgt_pool_base) { struct kvm_s2_mmu *mmu = &host_kvm.arch.mmu; @@ -101,16 +103,17 @@ int kvm_host_prepare_stage2(void *pgt_pool_base) if (ret) return ret; - ret = kvm_pgtable_stage2_init_flags(&host_kvm.pgt, &host_kvm.arch, - &host_kvm.mm_ops, KVM_HOST_S2_FLAGS); + ret = __kvm_pgtable_stage2_init(&host_kvm.pgt, &host_kvm.arch, + &host_kvm.mm_ops, KVM_HOST_S2_FLAGS, + host_stage2_force_pte_cb); if (ret) return ret; mmu->pgd_phys = __hyp_pa(host_kvm.pgt.pgd); mmu->arch = &host_kvm.arch; mmu->pgt = &host_kvm.pgt; - mmu->vmid.vmid_gen = 0; - mmu->vmid.vmid = 0; + WRITE_ONCE(mmu->vmid.vmid_gen, 0); + WRITE_ONCE(mmu->vmid.vmid, 0); return 0; } @@ -126,7 +129,7 @@ int __pkvm_prot_finalize(void) kvm_flush_dcache_to_poc(params, sizeof(*params)); write_sysreg(params->hcr_el2, hcr_el2); - __load_stage2(&host_kvm.arch.mmu, host_kvm.arch.vtcr); + __load_stage2(&host_kvm.arch.mmu, &host_kvm.arch); /* * Make sure to have an ISB before the TLB maintenance below but only @@ -159,6 +162,11 @@ static int host_stage2_unmap_dev_all(void) return kvm_pgtable_stage2_unmap(pgt, addr, BIT(pgt->ia_bits) - addr); } +struct kvm_mem_range { + u64 start; + u64 end; +}; + static bool find_mem_range(phys_addr_t addr, struct kvm_mem_range *range) { int cur, left = 0, right = hyp_memblock_nr; @@ -189,16 +197,26 @@ static bool find_mem_range(phys_addr_t addr, struct kvm_mem_range *range) return false; } +bool addr_is_memory(phys_addr_t phys) +{ + struct kvm_mem_range range; + + return find_mem_range(phys, &range); +} + +static bool is_in_mem_range(u64 addr, struct kvm_mem_range *range) +{ + return range->start <= addr && addr < range->end; +} + static bool range_is_memory(u64 start, u64 end) { - struct kvm_mem_range r1, r2; + struct kvm_mem_range r; - if (!find_mem_range(start, &r1) || !find_mem_range(end, &r2)) - return false; - if (r1.start != r2.start) + if (!find_mem_range(start, &r)) return false; - return true; + return is_in_mem_range(end - 1, &r); } static inline int __host_stage2_idmap(u64 start, u64 end, @@ -208,60 +226,208 @@ static inline int __host_stage2_idmap(u64 start, u64 end, prot, &host_s2_pool); } +/* + * The pool has been provided with enough pages to cover all of memory with + * page granularity, but it is difficult to know how much of the MMIO range + * we will need to cover upfront, so we may need to 'recycle' the pages if we + * run out. + */ +#define host_stage2_try(fn, ...) \ + ({ \ + int __ret; \ + hyp_assert_lock_held(&host_kvm.lock); \ + __ret = fn(__VA_ARGS__); \ + if (__ret == -ENOMEM) { \ + __ret = host_stage2_unmap_dev_all(); \ + if (!__ret) \ + __ret = fn(__VA_ARGS__); \ + } \ + __ret; \ + }) + +static inline bool range_included(struct kvm_mem_range *child, + struct kvm_mem_range *parent) +{ + return parent->start <= child->start && child->end <= parent->end; +} + +static int host_stage2_adjust_range(u64 addr, struct kvm_mem_range *range) +{ + struct kvm_mem_range cur; + kvm_pte_t pte; + u32 level; + int ret; + + hyp_assert_lock_held(&host_kvm.lock); + ret = kvm_pgtable_get_leaf(&host_kvm.pgt, addr, &pte, &level); + if (ret) + return ret; + + if (kvm_pte_valid(pte)) + return -EAGAIN; + + if (pte) + return -EPERM; + + do { + u64 granule = kvm_granule_size(level); + cur.start = ALIGN_DOWN(addr, granule); + cur.end = cur.start + granule; + level++; + } while ((level < KVM_PGTABLE_MAX_LEVELS) && + !(kvm_level_supports_block_mapping(level) && + range_included(&cur, range))); + + *range = cur; + + return 0; +} + +int host_stage2_idmap_locked(phys_addr_t addr, u64 size, + enum kvm_pgtable_prot prot) +{ + hyp_assert_lock_held(&host_kvm.lock); + + return host_stage2_try(__host_stage2_idmap, addr, addr + size, prot); +} + +int host_stage2_set_owner_locked(phys_addr_t addr, u64 size, u8 owner_id) +{ + hyp_assert_lock_held(&host_kvm.lock); + + return host_stage2_try(kvm_pgtable_stage2_set_owner, &host_kvm.pgt, + addr, size, &host_s2_pool, owner_id); +} + +static bool host_stage2_force_pte_cb(u64 addr, u64 end, enum kvm_pgtable_prot prot) +{ + /* + * Block mappings must be used with care in the host stage-2 as a + * kvm_pgtable_stage2_map() operation targeting a page in the range of + * an existing block will delete the block under the assumption that + * mappings in the rest of the block range can always be rebuilt lazily. + * That assumption is correct for the host stage-2 with RWX mappings + * targeting memory or RW mappings targeting MMIO ranges (see + * host_stage2_idmap() below which implements some of the host memory + * abort logic). However, this is not safe for any other mappings where + * the host stage-2 page-table is in fact the only place where this + * state is stored. In all those cases, it is safer to use page-level + * mappings, hence avoiding to lose the state because of side-effects in + * kvm_pgtable_stage2_map(). + */ + if (range_is_memory(addr, end)) + return prot != PKVM_HOST_MEM_PROT; + else + return prot != PKVM_HOST_MMIO_PROT; +} + static int host_stage2_idmap(u64 addr) { - enum kvm_pgtable_prot prot = KVM_PGTABLE_PROT_R | KVM_PGTABLE_PROT_W; struct kvm_mem_range range; bool is_memory = find_mem_range(addr, &range); + enum kvm_pgtable_prot prot; int ret; - if (is_memory) - prot |= KVM_PGTABLE_PROT_X; + prot = is_memory ? PKVM_HOST_MEM_PROT : PKVM_HOST_MMIO_PROT; hyp_spin_lock(&host_kvm.lock); - ret = kvm_pgtable_stage2_find_range(&host_kvm.pgt, addr, prot, &range); + ret = host_stage2_adjust_range(addr, &range); if (ret) goto unlock; - ret = __host_stage2_idmap(range.start, range.end, prot); - if (ret != -ENOMEM) + ret = host_stage2_idmap_locked(range.start, range.end - range.start, prot); +unlock: + hyp_spin_unlock(&host_kvm.lock); + + return ret; +} + +static inline bool check_prot(enum kvm_pgtable_prot prot, + enum kvm_pgtable_prot required, + enum kvm_pgtable_prot denied) +{ + return (prot & (required | denied)) == required; +} + +int __pkvm_host_share_hyp(u64 pfn) +{ + phys_addr_t addr = hyp_pfn_to_phys(pfn); + enum kvm_pgtable_prot prot, cur; + void *virt = __hyp_va(addr); + enum pkvm_page_state state; + kvm_pte_t pte; + int ret; + + if (!addr_is_memory(addr)) + return -EINVAL; + + hyp_spin_lock(&host_kvm.lock); + hyp_spin_lock(&pkvm_pgd_lock); + + ret = kvm_pgtable_get_leaf(&host_kvm.pgt, addr, &pte, NULL); + if (ret) goto unlock; + if (!pte) + goto map_shared; /* - * The pool has been provided with enough pages to cover all of memory - * with page granularity, but it is difficult to know how much of the - * MMIO range we will need to cover upfront, so we may need to 'recycle' - * the pages if we run out. + * Check attributes in the host stage-2 PTE. We need the page to be: + * - mapped RWX as we're sharing memory; + * - not borrowed, as that implies absence of ownership. + * Otherwise, we can't let it got through */ - ret = host_stage2_unmap_dev_all(); - if (ret) + cur = kvm_pgtable_stage2_pte_prot(pte); + prot = pkvm_mkstate(0, PKVM_PAGE_SHARED_BORROWED); + if (!check_prot(cur, PKVM_HOST_MEM_PROT, prot)) { + ret = -EPERM; goto unlock; + } - ret = __host_stage2_idmap(range.start, range.end, prot); + state = pkvm_getstate(cur); + if (state == PKVM_PAGE_OWNED) + goto map_shared; -unlock: - hyp_spin_unlock(&host_kvm.lock); + /* + * Tolerate double-sharing the same page, but this requires + * cross-checking the hypervisor stage-1. + */ + if (state != PKVM_PAGE_SHARED_OWNED) { + ret = -EPERM; + goto unlock; + } - return ret; -} + ret = kvm_pgtable_get_leaf(&pkvm_pgtable, (u64)virt, &pte, NULL); + if (ret) + goto unlock; -int __pkvm_mark_hyp(phys_addr_t start, phys_addr_t end) -{ - int ret; + /* + * If the page has been shared with the hypervisor, it must be + * already mapped as SHARED_BORROWED in its stage-1. + */ + cur = kvm_pgtable_hyp_pte_prot(pte); + prot = pkvm_mkstate(PAGE_HYP, PKVM_PAGE_SHARED_BORROWED); + if (!check_prot(cur, prot, ~prot)) + ret = -EPERM; + goto unlock; +map_shared: /* - * host_stage2_unmap_dev_all() currently relies on MMIO mappings being - * non-persistent, so don't allow changing page ownership in MMIO range. + * If the page is not yet shared, adjust mappings in both page-tables + * while both locks are held. */ - if (!range_is_memory(start, end)) - return -EINVAL; + prot = pkvm_mkstate(PAGE_HYP, PKVM_PAGE_SHARED_BORROWED); + ret = pkvm_create_mappings_locked(virt, virt + PAGE_SIZE, prot); + BUG_ON(ret); - hyp_spin_lock(&host_kvm.lock); - ret = kvm_pgtable_stage2_set_owner(&host_kvm.pgt, start, end - start, - &host_s2_pool, pkvm_hyp_id); + prot = pkvm_mkstate(PKVM_HOST_MEM_PROT, PKVM_PAGE_SHARED_OWNED); + ret = host_stage2_idmap_locked(addr, PAGE_SIZE, prot); + BUG_ON(ret); + +unlock: + hyp_spin_unlock(&pkvm_pgd_lock); hyp_spin_unlock(&host_kvm.lock); - return ret != -EAGAIN ? ret : 0; + return ret; } void handle_host_mem_abort(struct kvm_cpu_context *host_ctxt) diff --git a/arch/arm64/kvm/hyp/nvhe/mm.c b/arch/arm64/kvm/hyp/nvhe/mm.c index a8efdf0f9003..2fabeceb889a 100644 --- a/arch/arm64/kvm/hyp/nvhe/mm.c +++ b/arch/arm64/kvm/hyp/nvhe/mm.c @@ -23,8 +23,8 @@ u64 __io_map_base; struct memblock_region hyp_memory[HYP_MEMBLOCK_REGIONS]; unsigned int hyp_memblock_nr; -int __pkvm_create_mappings(unsigned long start, unsigned long size, - unsigned long phys, enum kvm_pgtable_prot prot) +static int __pkvm_create_mappings(unsigned long start, unsigned long size, + unsigned long phys, enum kvm_pgtable_prot prot) { int err; @@ -67,13 +67,15 @@ out: return addr; } -int pkvm_create_mappings(void *from, void *to, enum kvm_pgtable_prot prot) +int pkvm_create_mappings_locked(void *from, void *to, enum kvm_pgtable_prot prot) { unsigned long start = (unsigned long)from; unsigned long end = (unsigned long)to; unsigned long virt_addr; phys_addr_t phys; + hyp_assert_lock_held(&pkvm_pgd_lock); + start = start & PAGE_MASK; end = PAGE_ALIGN(end); @@ -81,7 +83,8 @@ int pkvm_create_mappings(void *from, void *to, enum kvm_pgtable_prot prot) int err; phys = hyp_virt_to_phys((void *)virt_addr); - err = __pkvm_create_mappings(virt_addr, PAGE_SIZE, phys, prot); + err = kvm_pgtable_hyp_map(&pkvm_pgtable, virt_addr, PAGE_SIZE, + phys, prot); if (err) return err; } @@ -89,6 +92,17 @@ int pkvm_create_mappings(void *from, void *to, enum kvm_pgtable_prot prot) return 0; } +int pkvm_create_mappings(void *from, void *to, enum kvm_pgtable_prot prot) +{ + int ret; + + hyp_spin_lock(&pkvm_pgd_lock); + ret = pkvm_create_mappings_locked(from, to, prot); + hyp_spin_unlock(&pkvm_pgd_lock); + + return ret; +} + int hyp_back_vmemmap(phys_addr_t phys, unsigned long size, phys_addr_t back) { unsigned long start, end; diff --git a/arch/arm64/kvm/hyp/nvhe/setup.c b/arch/arm64/kvm/hyp/nvhe/setup.c index 0b574d106519..57c27846320f 100644 --- a/arch/arm64/kvm/hyp/nvhe/setup.c +++ b/arch/arm64/kvm/hyp/nvhe/setup.c @@ -58,6 +58,7 @@ static int recreate_hyp_mappings(phys_addr_t phys, unsigned long size, { void *start, *end, *virt = hyp_phys_to_virt(phys); unsigned long pgt_size = hyp_s1_pgtable_pages() << PAGE_SHIFT; + enum kvm_pgtable_prot prot; int ret, i; /* Recreate the hyp page-table using the early page allocator */ @@ -83,10 +84,6 @@ static int recreate_hyp_mappings(phys_addr_t phys, unsigned long size, if (ret) return ret; - ret = pkvm_create_mappings(__start_rodata, __end_rodata, PAGE_HYP_RO); - if (ret) - return ret; - ret = pkvm_create_mappings(__hyp_rodata_start, __hyp_rodata_end, PAGE_HYP_RO); if (ret) return ret; @@ -95,10 +92,6 @@ static int recreate_hyp_mappings(phys_addr_t phys, unsigned long size, if (ret) return ret; - ret = pkvm_create_mappings(__hyp_bss_end, __bss_stop, PAGE_HYP_RO); - if (ret) - return ret; - ret = pkvm_create_mappings(virt, virt + size, PAGE_HYP); if (ret) return ret; @@ -117,6 +110,24 @@ static int recreate_hyp_mappings(phys_addr_t phys, unsigned long size, return ret; } + /* + * Map the host's .bss and .rodata sections RO in the hypervisor, but + * transfer the ownership from the host to the hypervisor itself to + * make sure it can't be donated or shared with another entity. + * + * The ownership transition requires matching changes in the host + * stage-2. This will be done later (see finalize_host_mappings()) once + * the hyp_vmemmap is addressable. + */ + prot = pkvm_mkstate(PAGE_HYP_RO, PKVM_PAGE_SHARED_OWNED); + ret = pkvm_create_mappings(__start_rodata, __end_rodata, prot); + if (ret) + return ret; + + ret = pkvm_create_mappings(__hyp_bss_end, __bss_stop, prot); + if (ret) + return ret; + return 0; } @@ -148,6 +159,57 @@ static void hpool_put_page(void *addr) hyp_put_page(&hpool, addr); } +static int finalize_host_mappings_walker(u64 addr, u64 end, u32 level, + kvm_pte_t *ptep, + enum kvm_pgtable_walk_flags flag, + void * const arg) +{ + enum kvm_pgtable_prot prot; + enum pkvm_page_state state; + kvm_pte_t pte = *ptep; + phys_addr_t phys; + + if (!kvm_pte_valid(pte)) + return 0; + + if (level != (KVM_PGTABLE_MAX_LEVELS - 1)) + return -EINVAL; + + phys = kvm_pte_to_phys(pte); + if (!addr_is_memory(phys)) + return 0; + + /* + * Adjust the host stage-2 mappings to match the ownership attributes + * configured in the hypervisor stage-1. + */ + state = pkvm_getstate(kvm_pgtable_hyp_pte_prot(pte)); + switch (state) { + case PKVM_PAGE_OWNED: + return host_stage2_set_owner_locked(phys, PAGE_SIZE, pkvm_hyp_id); + case PKVM_PAGE_SHARED_OWNED: + prot = pkvm_mkstate(PKVM_HOST_MEM_PROT, PKVM_PAGE_SHARED_BORROWED); + break; + case PKVM_PAGE_SHARED_BORROWED: + prot = pkvm_mkstate(PKVM_HOST_MEM_PROT, PKVM_PAGE_SHARED_OWNED); + break; + default: + return -EINVAL; + } + + return host_stage2_idmap_locked(phys, PAGE_SIZE, prot); +} + +static int finalize_host_mappings(void) +{ + struct kvm_pgtable_walker walker = { + .cb = finalize_host_mappings_walker, + .flags = KVM_PGTABLE_WALK_LEAF, + }; + + return kvm_pgtable_walk(&pkvm_pgtable, 0, BIT(pkvm_pgtable.ia_bits), &walker); +} + void __noreturn __pkvm_init_finalise(void) { struct kvm_host_data *host_data = this_cpu_ptr(&kvm_host_data); @@ -167,6 +229,10 @@ void __noreturn __pkvm_init_finalise(void) if (ret) goto out; + ret = finalize_host_mappings(); + if (ret) + goto out; + pkvm_pgtable_mm_ops = (struct kvm_pgtable_mm_ops) { .zalloc_page = hyp_zalloc_hyp_page, .phys_to_virt = hyp_phys_to_virt, diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c index f7af9688c1f7..a34b01cc8ab9 100644 --- a/arch/arm64/kvm/hyp/nvhe/switch.c +++ b/arch/arm64/kvm/hyp/nvhe/switch.c @@ -41,7 +41,7 @@ static void __activate_traps(struct kvm_vcpu *vcpu) ___activate_traps(vcpu); __activate_traps_common(vcpu); - val = CPTR_EL2_DEFAULT; + val = vcpu->arch.cptr_el2; val |= CPTR_EL2_TTA | CPTR_EL2_TAM; if (!update_fp_enabled(vcpu)) { val |= CPTR_EL2_TFP | CPTR_EL2_TZ; @@ -69,12 +69,10 @@ static void __activate_traps(struct kvm_vcpu *vcpu) static void __deactivate_traps(struct kvm_vcpu *vcpu) { extern char __kvm_hyp_host_vector[]; - u64 mdcr_el2, cptr; + u64 cptr; ___deactivate_traps(vcpu); - mdcr_el2 = read_sysreg(mdcr_el2); - if (cpus_have_final_cap(ARM64_WORKAROUND_SPECULATIVE_AT)) { u64 val; @@ -92,13 +90,8 @@ static void __deactivate_traps(struct kvm_vcpu *vcpu) isb(); } - __deactivate_traps_common(); - - mdcr_el2 &= MDCR_EL2_HPMN_MASK; - mdcr_el2 |= MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT; - mdcr_el2 |= MDCR_EL2_E2TB_MASK << MDCR_EL2_E2TB_SHIFT; + __deactivate_traps_common(vcpu); - write_sysreg(mdcr_el2, mdcr_el2); write_sysreg(this_cpu_ptr(&kvm_init_params)->hcr_el2, hcr_el2); cptr = CPTR_EL2_DEFAULT; @@ -170,6 +163,7 @@ int __kvm_vcpu_run(struct kvm_vcpu *vcpu) { struct kvm_cpu_context *host_ctxt; struct kvm_cpu_context *guest_ctxt; + struct kvm_s2_mmu *mmu; bool pmu_switch_needed; u64 exit_code; @@ -213,7 +207,8 @@ int __kvm_vcpu_run(struct kvm_vcpu *vcpu) __sysreg32_restore_state(vcpu); __sysreg_restore_state_nvhe(guest_ctxt); - __load_guest_stage2(kern_hyp_va(vcpu->arch.hw_mmu)); + mmu = kern_hyp_va(vcpu->arch.hw_mmu); + __load_stage2(mmu, kern_hyp_va(mmu->arch)); __activate_traps(vcpu); __hyp_vgic_restore_state(vcpu); diff --git a/arch/arm64/kvm/hyp/nvhe/tlb.c b/arch/arm64/kvm/hyp/nvhe/tlb.c index 38ed0f6f2703..d296d617f589 100644 --- a/arch/arm64/kvm/hyp/nvhe/tlb.c +++ b/arch/arm64/kvm/hyp/nvhe/tlb.c @@ -34,12 +34,12 @@ static void __tlb_switch_to_guest(struct kvm_s2_mmu *mmu, } /* - * __load_guest_stage2() includes an ISB only when the AT + * __load_stage2() includes an ISB only when the AT * workaround is applied. Take care of the opposite condition, * ensuring that we always have an ISB, but not two ISBs back * to back. */ - __load_guest_stage2(mmu); + __load_stage2(mmu, kern_hyp_va(mmu->arch)); asm(ALTERNATIVE("isb", "nop", ARM64_WORKAROUND_SPECULATIVE_AT)); } diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c index 05321f4165e3..f8ceebe4982e 100644 --- a/arch/arm64/kvm/hyp/pgtable.c +++ b/arch/arm64/kvm/hyp/pgtable.c @@ -11,16 +11,12 @@ #include <asm/kvm_pgtable.h> #include <asm/stage2_pgtable.h> -#define KVM_PTE_VALID BIT(0) #define KVM_PTE_TYPE BIT(1) #define KVM_PTE_TYPE_BLOCK 0 #define KVM_PTE_TYPE_PAGE 1 #define KVM_PTE_TYPE_TABLE 1 -#define KVM_PTE_ADDR_MASK GENMASK(47, PAGE_SHIFT) -#define KVM_PTE_ADDR_51_48 GENMASK(15, 12) - #define KVM_PTE_LEAF_ATTR_LO GENMASK(11, 2) #define KVM_PTE_LEAF_ATTR_LO_S1_ATTRIDX GENMASK(4, 2) @@ -40,6 +36,8 @@ #define KVM_PTE_LEAF_ATTR_HI GENMASK(63, 51) +#define KVM_PTE_LEAF_ATTR_HI_SW GENMASK(58, 55) + #define KVM_PTE_LEAF_ATTR_HI_S1_XN BIT(54) #define KVM_PTE_LEAF_ATTR_HI_S2_XN BIT(54) @@ -48,9 +46,7 @@ KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W | \ KVM_PTE_LEAF_ATTR_HI_S2_XN) -#define KVM_PTE_LEAF_ATTR_S2_IGNORED GENMASK(58, 55) - -#define KVM_INVALID_PTE_OWNER_MASK GENMASK(63, 56) +#define KVM_INVALID_PTE_OWNER_MASK GENMASK(9, 2) #define KVM_MAX_OWNER_ID 1 struct kvm_pgtable_walk_data { @@ -61,17 +57,6 @@ struct kvm_pgtable_walk_data { u64 end; }; -static u64 kvm_granule_shift(u32 level) -{ - /* Assumes KVM_PGTABLE_MAX_LEVELS is 4 */ - return ARM64_HW_PGTABLE_LEVEL_SHIFT(level); -} - -static u64 kvm_granule_size(u32 level) -{ - return BIT(kvm_granule_shift(level)); -} - #define KVM_PHYS_INVALID (-1ULL) static bool kvm_phys_is_valid(u64 phys) @@ -79,15 +64,6 @@ static bool kvm_phys_is_valid(u64 phys) return phys < BIT(id_aa64mmfr0_parange_to_phys_shift(ID_AA64MMFR0_PARANGE_MAX)); } -static bool kvm_level_supports_block_mapping(u32 level) -{ - /* - * Reject invalid block mappings and don't bother with 4TB mappings for - * 52-bit PAs. - */ - return !(level == 0 || (PAGE_SIZE != SZ_4K && level == 1)); -} - static bool kvm_block_mapping_supported(u64 addr, u64 end, u64 phys, u32 level) { u64 granule = kvm_granule_size(level); @@ -135,11 +111,6 @@ static u32 kvm_pgd_pages(u32 ia_bits, u32 start_level) return __kvm_pgd_page_idx(&pgt, -1ULL) + 1; } -static bool kvm_pte_valid(kvm_pte_t pte) -{ - return pte & KVM_PTE_VALID; -} - static bool kvm_pte_table(kvm_pte_t pte, u32 level) { if (level == KVM_PGTABLE_MAX_LEVELS - 1) @@ -151,16 +122,6 @@ static bool kvm_pte_table(kvm_pte_t pte, u32 level) return FIELD_GET(KVM_PTE_TYPE, pte) == KVM_PTE_TYPE_TABLE; } -static u64 kvm_pte_to_phys(kvm_pte_t pte) -{ - u64 pa = pte & KVM_PTE_ADDR_MASK; - - if (PAGE_SHIFT == 16) - pa |= FIELD_GET(KVM_PTE_ADDR_51_48, pte) << 48; - - return pa; -} - static kvm_pte_t kvm_phys_to_pte(u64 pa) { kvm_pte_t pte = pa & KVM_PTE_ADDR_MASK; @@ -326,6 +287,45 @@ int kvm_pgtable_walk(struct kvm_pgtable *pgt, u64 addr, u64 size, return _kvm_pgtable_walk(&walk_data); } +struct leaf_walk_data { + kvm_pte_t pte; + u32 level; +}; + +static int leaf_walker(u64 addr, u64 end, u32 level, kvm_pte_t *ptep, + enum kvm_pgtable_walk_flags flag, void * const arg) +{ + struct leaf_walk_data *data = arg; + + data->pte = *ptep; + data->level = level; + + return 0; +} + +int kvm_pgtable_get_leaf(struct kvm_pgtable *pgt, u64 addr, + kvm_pte_t *ptep, u32 *level) +{ + struct leaf_walk_data data; + struct kvm_pgtable_walker walker = { + .cb = leaf_walker, + .flags = KVM_PGTABLE_WALK_LEAF, + .arg = &data, + }; + int ret; + + ret = kvm_pgtable_walk(pgt, ALIGN_DOWN(addr, PAGE_SIZE), + PAGE_SIZE, &walker); + if (!ret) { + if (ptep) + *ptep = data.pte; + if (level) + *level = data.level; + } + + return ret; +} + struct hyp_map_data { u64 phys; kvm_pte_t attr; @@ -357,11 +357,47 @@ static int hyp_set_prot_attr(enum kvm_pgtable_prot prot, kvm_pte_t *ptep) attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S1_AP, ap); attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S1_SH, sh); attr |= KVM_PTE_LEAF_ATTR_LO_S1_AF; + attr |= prot & KVM_PTE_LEAF_ATTR_HI_SW; *ptep = attr; return 0; } +enum kvm_pgtable_prot kvm_pgtable_hyp_pte_prot(kvm_pte_t pte) +{ + enum kvm_pgtable_prot prot = pte & KVM_PTE_LEAF_ATTR_HI_SW; + u32 ap; + + if (!kvm_pte_valid(pte)) + return prot; + + if (!(pte & KVM_PTE_LEAF_ATTR_HI_S1_XN)) + prot |= KVM_PGTABLE_PROT_X; + + ap = FIELD_GET(KVM_PTE_LEAF_ATTR_LO_S1_AP, pte); + if (ap == KVM_PTE_LEAF_ATTR_LO_S1_AP_RO) + prot |= KVM_PGTABLE_PROT_R; + else if (ap == KVM_PTE_LEAF_ATTR_LO_S1_AP_RW) + prot |= KVM_PGTABLE_PROT_RW; + + return prot; +} + +static bool hyp_pte_needs_update(kvm_pte_t old, kvm_pte_t new) +{ + /* + * Tolerate KVM recreating the exact same mapping, or changing software + * bits if the existing mapping was valid. + */ + if (old == new) + return false; + + if (!kvm_pte_valid(old)) + return true; + + return !WARN_ON((old ^ new) & ~KVM_PTE_LEAF_ATTR_HI_SW); +} + static bool hyp_map_walker_try_leaf(u64 addr, u64 end, u32 level, kvm_pte_t *ptep, struct hyp_map_data *data) { @@ -371,9 +407,8 @@ static bool hyp_map_walker_try_leaf(u64 addr, u64 end, u32 level, if (!kvm_block_mapping_supported(addr, end, phys, level)) return false; - /* Tolerate KVM recreating the exact same mapping */ new = kvm_init_valid_leaf_pte(phys, data->attr, level); - if (old != new && !WARN_ON(kvm_pte_valid(old))) + if (hyp_pte_needs_update(old, new)) smp_store_release(ptep, new); data->phys += granule; @@ -438,6 +473,8 @@ int kvm_pgtable_hyp_init(struct kvm_pgtable *pgt, u32 va_bits, pgt->start_level = KVM_PGTABLE_MAX_LEVELS - levels; pgt->mm_ops = mm_ops; pgt->mmu = NULL; + pgt->force_pte_cb = NULL; + return 0; } @@ -475,6 +512,9 @@ struct stage2_map_data { void *memcache; struct kvm_pgtable_mm_ops *mm_ops; + + /* Force mappings to page granularity */ + bool force_pte; }; u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift) @@ -539,11 +579,29 @@ static int stage2_set_prot_attr(struct kvm_pgtable *pgt, enum kvm_pgtable_prot p attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S2_SH, sh); attr |= KVM_PTE_LEAF_ATTR_LO_S2_AF; + attr |= prot & KVM_PTE_LEAF_ATTR_HI_SW; *ptep = attr; return 0; } +enum kvm_pgtable_prot kvm_pgtable_stage2_pte_prot(kvm_pte_t pte) +{ + enum kvm_pgtable_prot prot = pte & KVM_PTE_LEAF_ATTR_HI_SW; + + if (!kvm_pte_valid(pte)) + return prot; + + if (pte & KVM_PTE_LEAF_ATTR_LO_S2_S2AP_R) + prot |= KVM_PGTABLE_PROT_R; + if (pte & KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W) + prot |= KVM_PGTABLE_PROT_W; + if (!(pte & KVM_PTE_LEAF_ATTR_HI_S2_XN)) + prot |= KVM_PGTABLE_PROT_X; + + return prot; +} + static bool stage2_pte_needs_update(kvm_pte_t old, kvm_pte_t new) { if (!kvm_pte_valid(old) || !kvm_pte_valid(new)) @@ -588,6 +646,15 @@ static bool stage2_pte_executable(kvm_pte_t pte) return !(pte & KVM_PTE_LEAF_ATTR_HI_S2_XN); } +static bool stage2_leaf_mapping_allowed(u64 addr, u64 end, u32 level, + struct stage2_map_data *data) +{ + if (data->force_pte && (level < (KVM_PGTABLE_MAX_LEVELS - 1))) + return false; + + return kvm_block_mapping_supported(addr, end, data->phys, level); +} + static int stage2_map_walker_try_leaf(u64 addr, u64 end, u32 level, kvm_pte_t *ptep, struct stage2_map_data *data) @@ -597,7 +664,7 @@ static int stage2_map_walker_try_leaf(u64 addr, u64 end, u32 level, struct kvm_pgtable *pgt = data->mmu->pgt; struct kvm_pgtable_mm_ops *mm_ops = data->mm_ops; - if (!kvm_block_mapping_supported(addr, end, phys, level)) + if (!stage2_leaf_mapping_allowed(addr, end, level, data)) return -E2BIG; if (kvm_phys_is_valid(phys)) @@ -641,7 +708,7 @@ static int stage2_map_walk_table_pre(u64 addr, u64 end, u32 level, if (data->anchor) return 0; - if (!kvm_block_mapping_supported(addr, end, data->phys, level)) + if (!stage2_leaf_mapping_allowed(addr, end, level, data)) return 0; data->childp = kvm_pte_follow(*ptep, data->mm_ops); @@ -771,6 +838,7 @@ int kvm_pgtable_stage2_map(struct kvm_pgtable *pgt, u64 addr, u64 size, .mmu = pgt->mmu, .memcache = mc, .mm_ops = pgt->mm_ops, + .force_pte = pgt->force_pte_cb && pgt->force_pte_cb(addr, addr + size, prot), }; struct kvm_pgtable_walker walker = { .cb = stage2_map_walker, @@ -802,6 +870,7 @@ int kvm_pgtable_stage2_set_owner(struct kvm_pgtable *pgt, u64 addr, u64 size, .memcache = mc, .mm_ops = pgt->mm_ops, .owner_id = owner_id, + .force_pte = true, }; struct kvm_pgtable_walker walker = { .cb = stage2_map_walker, @@ -995,6 +1064,9 @@ int kvm_pgtable_stage2_relax_perms(struct kvm_pgtable *pgt, u64 addr, u32 level; kvm_pte_t set = 0, clr = 0; + if (prot & KVM_PTE_LEAF_ATTR_HI_SW) + return -EINVAL; + if (prot & KVM_PGTABLE_PROT_R) set |= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_R; @@ -1043,9 +1115,11 @@ int kvm_pgtable_stage2_flush(struct kvm_pgtable *pgt, u64 addr, u64 size) return kvm_pgtable_walk(pgt, addr, size, &walker); } -int kvm_pgtable_stage2_init_flags(struct kvm_pgtable *pgt, struct kvm_arch *arch, - struct kvm_pgtable_mm_ops *mm_ops, - enum kvm_pgtable_stage2_flags flags) + +int __kvm_pgtable_stage2_init(struct kvm_pgtable *pgt, struct kvm_arch *arch, + struct kvm_pgtable_mm_ops *mm_ops, + enum kvm_pgtable_stage2_flags flags, + kvm_pgtable_force_pte_cb_t force_pte_cb) { size_t pgd_sz; u64 vtcr = arch->vtcr; @@ -1063,6 +1137,7 @@ int kvm_pgtable_stage2_init_flags(struct kvm_pgtable *pgt, struct kvm_arch *arch pgt->mm_ops = mm_ops; pgt->mmu = &arch->mmu; pgt->flags = flags; + pgt->force_pte_cb = force_pte_cb; /* Ensure zeroed PGD pages are visible to the hardware walker */ dsb(ishst); @@ -1102,77 +1177,3 @@ void kvm_pgtable_stage2_destroy(struct kvm_pgtable *pgt) pgt->mm_ops->free_pages_exact(pgt->pgd, pgd_sz); pgt->pgd = NULL; } - -#define KVM_PTE_LEAF_S2_COMPAT_MASK (KVM_PTE_LEAF_ATTR_S2_PERMS | \ - KVM_PTE_LEAF_ATTR_LO_S2_MEMATTR | \ - KVM_PTE_LEAF_ATTR_S2_IGNORED) - -static int stage2_check_permission_walker(u64 addr, u64 end, u32 level, - kvm_pte_t *ptep, - enum kvm_pgtable_walk_flags flag, - void * const arg) -{ - kvm_pte_t old_attr, pte = *ptep, *new_attr = arg; - - /* - * Compatible mappings are either invalid and owned by the page-table - * owner (whose id is 0), or valid with matching permission attributes. - */ - if (kvm_pte_valid(pte)) { - old_attr = pte & KVM_PTE_LEAF_S2_COMPAT_MASK; - if (old_attr != *new_attr) - return -EEXIST; - } else if (pte) { - return -EEXIST; - } - - return 0; -} - -int kvm_pgtable_stage2_find_range(struct kvm_pgtable *pgt, u64 addr, - enum kvm_pgtable_prot prot, - struct kvm_mem_range *range) -{ - kvm_pte_t attr; - struct kvm_pgtable_walker check_perm_walker = { - .cb = stage2_check_permission_walker, - .flags = KVM_PGTABLE_WALK_LEAF, - .arg = &attr, - }; - u64 granule, start, end; - u32 level; - int ret; - - ret = stage2_set_prot_attr(pgt, prot, &attr); - if (ret) - return ret; - attr &= KVM_PTE_LEAF_S2_COMPAT_MASK; - - for (level = pgt->start_level; level < KVM_PGTABLE_MAX_LEVELS; level++) { - granule = kvm_granule_size(level); - start = ALIGN_DOWN(addr, granule); - end = start + granule; - - if (!kvm_level_supports_block_mapping(level)) - continue; - - if (start < range->start || range->end < end) - continue; - - /* - * Check the presence of existing mappings with incompatible - * permissions within the current block range, and try one level - * deeper if one is found. - */ - ret = kvm_pgtable_walk(pgt, start, granule, &check_perm_walker); - if (ret != -EEXIST) - break; - } - - if (!ret) { - range->start = start; - range->end = end; - } - - return ret; -} diff --git a/arch/arm64/kvm/hyp/reserved_mem.c b/arch/arm64/kvm/hyp/reserved_mem.c index d654921dd09b..578670e3f608 100644 --- a/arch/arm64/kvm/hyp/reserved_mem.c +++ b/arch/arm64/kvm/hyp/reserved_mem.c @@ -92,12 +92,10 @@ void __init kvm_hyp_reserve(void) * this is unmapped from the host stage-2, and fallback to PAGE_SIZE. */ hyp_mem_size = hyp_mem_pages << PAGE_SHIFT; - hyp_mem_base = memblock_find_in_range(0, memblock_end_of_DRAM(), - ALIGN(hyp_mem_size, PMD_SIZE), - PMD_SIZE); + hyp_mem_base = memblock_phys_alloc(ALIGN(hyp_mem_size, PMD_SIZE), + PMD_SIZE); if (!hyp_mem_base) - hyp_mem_base = memblock_find_in_range(0, memblock_end_of_DRAM(), - hyp_mem_size, PAGE_SIZE); + hyp_mem_base = memblock_phys_alloc(hyp_mem_size, PAGE_SIZE); else hyp_mem_size = ALIGN(hyp_mem_size, PMD_SIZE); @@ -105,7 +103,6 @@ void __init kvm_hyp_reserve(void) kvm_err("Failed to reserve hyp memory\n"); return; } - memblock_reserve(hyp_mem_base, hyp_mem_size); kvm_info("Reserved %lld MiB at 0x%llx\n", hyp_mem_size >> 20, hyp_mem_base); diff --git a/arch/arm64/kvm/hyp/vhe/debug-sr.c b/arch/arm64/kvm/hyp/vhe/debug-sr.c index f1e2e5a00933..289689b2682d 100644 --- a/arch/arm64/kvm/hyp/vhe/debug-sr.c +++ b/arch/arm64/kvm/hyp/vhe/debug-sr.c @@ -20,7 +20,7 @@ void __debug_switch_to_host(struct kvm_vcpu *vcpu) __debug_switch_to_host_common(vcpu); } -u32 __kvm_get_mdcr_el2(void) +u64 __kvm_get_mdcr_el2(void) { return read_sysreg(mdcr_el2); } diff --git a/arch/arm64/kvm/hyp/vhe/switch.c b/arch/arm64/kvm/hyp/vhe/switch.c index b3229924d243..ded2c66675f0 100644 --- a/arch/arm64/kvm/hyp/vhe/switch.c +++ b/arch/arm64/kvm/hyp/vhe/switch.c @@ -91,17 +91,9 @@ void activate_traps_vhe_load(struct kvm_vcpu *vcpu) __activate_traps_common(vcpu); } -void deactivate_traps_vhe_put(void) +void deactivate_traps_vhe_put(struct kvm_vcpu *vcpu) { - u64 mdcr_el2 = read_sysreg(mdcr_el2); - - mdcr_el2 &= MDCR_EL2_HPMN_MASK | - MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT | - MDCR_EL2_TPMS; - - write_sysreg(mdcr_el2, mdcr_el2); - - __deactivate_traps_common(); + __deactivate_traps_common(vcpu); } /* Switch to the guest for VHE systems running in EL2 */ @@ -124,11 +116,11 @@ static int __kvm_vcpu_run_vhe(struct kvm_vcpu *vcpu) * * We have already configured the guest's stage 1 translation in * kvm_vcpu_load_sysregs_vhe above. We must now call - * __load_guest_stage2 before __activate_traps, because - * __load_guest_stage2 configures stage 2 translation, and + * __load_stage2 before __activate_traps, because + * __load_stage2 configures stage 2 translation, and * __activate_traps clear HCR_EL2.TGE (among other things). */ - __load_guest_stage2(vcpu->arch.hw_mmu); + __load_stage2(vcpu->arch.hw_mmu, vcpu->arch.hw_mmu->arch); __activate_traps(vcpu); __kvm_adjust_pc(vcpu); diff --git a/arch/arm64/kvm/hyp/vhe/sysreg-sr.c b/arch/arm64/kvm/hyp/vhe/sysreg-sr.c index 2a0b8c88d74f..007a12dd4351 100644 --- a/arch/arm64/kvm/hyp/vhe/sysreg-sr.c +++ b/arch/arm64/kvm/hyp/vhe/sysreg-sr.c @@ -101,7 +101,7 @@ void kvm_vcpu_put_sysregs_vhe(struct kvm_vcpu *vcpu) struct kvm_cpu_context *host_ctxt; host_ctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt; - deactivate_traps_vhe_put(); + deactivate_traps_vhe_put(vcpu); __sysreg_save_el1_state(guest_ctxt); __sysreg_save_user_state(guest_ctxt); diff --git a/arch/arm64/kvm/hyp/vhe/tlb.c b/arch/arm64/kvm/hyp/vhe/tlb.c index 66f17349f0c3..24cef9b87f9e 100644 --- a/arch/arm64/kvm/hyp/vhe/tlb.c +++ b/arch/arm64/kvm/hyp/vhe/tlb.c @@ -50,10 +50,10 @@ static void __tlb_switch_to_guest(struct kvm_s2_mmu *mmu, * * ARM erratum 1165522 requires some special handling (again), * as we need to make sure both stages of translation are in - * place before clearing TGE. __load_guest_stage2() already + * place before clearing TGE. __load_stage2() already * has an ISB in order to deal with this. */ - __load_guest_stage2(mmu); + __load_stage2(mmu, mmu->arch); val = read_sysreg(hcr_el2); val &= ~HCR_TGE; write_sysreg(val, hcr_el2); diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c index 3155c9e778f0..1a94a7ca48f2 100644 --- a/arch/arm64/kvm/mmu.c +++ b/arch/arm64/kvm/mmu.c @@ -80,6 +80,7 @@ static bool memslot_is_logging(struct kvm_memory_slot *memslot) */ void kvm_flush_remote_tlbs(struct kvm *kvm) { + ++kvm->stat.generic.remote_tlb_flush_requests; kvm_call_hyp(__kvm_tlb_flush_vmid, &kvm->arch.mmu); } @@ -259,10 +260,8 @@ static int __create_hyp_mappings(unsigned long start, unsigned long size, { int err; - if (!kvm_host_owns_hyp_mappings()) { - return kvm_call_hyp_nvhe(__pkvm_create_mappings, - start, size, phys, prot); - } + if (WARN_ON(!kvm_host_owns_hyp_mappings())) + return -EINVAL; mutex_lock(&kvm_hyp_pgd_mutex); err = kvm_pgtable_hyp_map(hyp_pgtable, start, size, phys, prot); @@ -282,6 +281,21 @@ static phys_addr_t kvm_kaddr_to_phys(void *kaddr) } } +static int pkvm_share_hyp(phys_addr_t start, phys_addr_t end) +{ + phys_addr_t addr; + int ret; + + for (addr = ALIGN_DOWN(start, PAGE_SIZE); addr < end; addr += PAGE_SIZE) { + ret = kvm_call_hyp_nvhe(__pkvm_host_share_hyp, + __phys_to_pfn(addr)); + if (ret) + return ret; + } + + return 0; +} + /** * create_hyp_mappings - duplicate a kernel virtual address range in Hyp mode * @from: The virtual kernel start address of the range @@ -302,6 +316,13 @@ int create_hyp_mappings(void *from, void *to, enum kvm_pgtable_prot prot) if (is_kernel_in_hyp_mode()) return 0; + if (!kvm_host_owns_hyp_mappings()) { + if (WARN_ON(prot != PAGE_HYP)) + return -EPERM; + return pkvm_share_hyp(kvm_kaddr_to_phys(from), + kvm_kaddr_to_phys(to)); + } + start = start & PAGE_MASK; end = PAGE_ALIGN(end); @@ -433,6 +454,32 @@ int create_hyp_exec_mappings(phys_addr_t phys_addr, size_t size, return 0; } +static struct kvm_pgtable_mm_ops kvm_user_mm_ops = { + /* We shouldn't need any other callback to walk the PT */ + .phys_to_virt = kvm_host_va, +}; + +static int get_user_mapping_size(struct kvm *kvm, u64 addr) +{ + struct kvm_pgtable pgt = { + .pgd = (kvm_pte_t *)kvm->mm->pgd, + .ia_bits = VA_BITS, + .start_level = (KVM_PGTABLE_MAX_LEVELS - + CONFIG_PGTABLE_LEVELS), + .mm_ops = &kvm_user_mm_ops, + }; + kvm_pte_t pte = 0; /* Keep GCC quiet... */ + u32 level = ~0; + int ret; + + ret = kvm_pgtable_get_leaf(&pgt, addr, &pte, &level); + VM_BUG_ON(ret); + VM_BUG_ON(level >= KVM_PGTABLE_MAX_LEVELS); + VM_BUG_ON(!(pte & PTE_VALID)); + + return BIT(ARM64_HW_PGTABLE_LEVEL_SHIFT(level)); +} + static struct kvm_pgtable_mm_ops kvm_s2_mm_ops = { .zalloc_page = stage2_memcache_zalloc_page, .zalloc_pages_exact = kvm_host_zalloc_pages_exact, @@ -485,7 +532,7 @@ int kvm_init_stage2_mmu(struct kvm *kvm, struct kvm_s2_mmu *mmu) mmu->arch = &kvm->arch; mmu->pgt = pgt; mmu->pgd_phys = __pa(pgt->pgd); - mmu->vmid.vmid_gen = 0; + WRITE_ONCE(mmu->vmid.vmid_gen, 0); return 0; out_destroy_pgtable: @@ -780,7 +827,7 @@ static bool fault_supports_stage2_huge_mapping(struct kvm_memory_slot *memslot, * Returns the size of the mapping. */ static unsigned long -transparent_hugepage_adjust(struct kvm_memory_slot *memslot, +transparent_hugepage_adjust(struct kvm *kvm, struct kvm_memory_slot *memslot, unsigned long hva, kvm_pfn_t *pfnp, phys_addr_t *ipap) { @@ -791,8 +838,8 @@ transparent_hugepage_adjust(struct kvm_memory_slot *memslot, * sure that the HVA and IPA are sufficiently aligned and that the * block map is contained within the memslot. */ - if (kvm_is_transparent_hugepage(pfn) && - fault_supports_stage2_huge_mapping(memslot, hva, PMD_SIZE)) { + if (fault_supports_stage2_huge_mapping(memslot, hva, PMD_SIZE) && + get_user_mapping_size(kvm, hva) >= PMD_SIZE) { /* * The address we faulted on is backed by a transparent huge * page. However, because we map the compound huge page and @@ -814,7 +861,7 @@ transparent_hugepage_adjust(struct kvm_memory_slot *memslot, *ipap &= PMD_MASK; kvm_release_pfn_clean(pfn); pfn &= ~(PTRS_PER_PMD - 1); - kvm_get_pfn(pfn); + get_page(pfn_to_page(pfn)); *pfnp = pfn; return PMD_SIZE; @@ -947,7 +994,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, vma_shift = get_vma_page_shift(vma, hva); } - shared = (vma->vm_flags & VM_PFNMAP); + shared = (vma->vm_flags & VM_SHARED); switch (vma_shift) { #ifndef __PAGETABLE_PMD_FOLDED @@ -1050,9 +1097,14 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, * If we are not forced to use page mapping, check if we are * backed by a THP and thus use block mapping if possible. */ - if (vma_pagesize == PAGE_SIZE && !(force_pte || device)) - vma_pagesize = transparent_hugepage_adjust(memslot, hva, - &pfn, &fault_ipa); + if (vma_pagesize == PAGE_SIZE && !(force_pte || device)) { + if (fault_status == FSC_PERM && fault_granule > PAGE_SIZE) + vma_pagesize = fault_granule; + else + vma_pagesize = transparent_hugepage_adjust(kvm, memslot, + hva, &pfn, + &fault_ipa); + } if (fault_status != FSC_PERM && !device && kvm_has_mte(kvm)) { /* Check the VMM hasn't introduced a new VM_SHARED VMA */ diff --git a/arch/arm64/kvm/perf.c b/arch/arm64/kvm/perf.c index 151c31fb9860..f9bb3b14130e 100644 --- a/arch/arm64/kvm/perf.c +++ b/arch/arm64/kvm/perf.c @@ -50,7 +50,7 @@ static struct perf_guest_info_callbacks kvm_guest_cbs = { int kvm_perf_init(void) { - if (kvm_pmu_probe_pmuver() != 0xf && !is_protected_kvm_enabled()) + if (kvm_pmu_probe_pmuver() != ID_AA64DFR0_PMUVER_IMP_DEF && !is_protected_kvm_enabled()) static_branch_enable(&kvm_arm_pmu_available); return perf_register_guest_info_callbacks(&kvm_guest_cbs); diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c index f33825c995cb..f5065f23b413 100644 --- a/arch/arm64/kvm/pmu-emul.c +++ b/arch/arm64/kvm/pmu-emul.c @@ -373,7 +373,6 @@ static u64 kvm_pmu_overflow_status(struct kvm_vcpu *vcpu) reg = __vcpu_sys_reg(vcpu, PMOVSSET_EL0); reg &= __vcpu_sys_reg(vcpu, PMCNTENSET_EL0); reg &= __vcpu_sys_reg(vcpu, PMINTENSET_EL1); - reg &= kvm_pmu_valid_counter_mask(vcpu); } return reg; @@ -564,20 +563,21 @@ void kvm_pmu_software_increment(struct kvm_vcpu *vcpu, u64 val) */ void kvm_pmu_handle_pmcr(struct kvm_vcpu *vcpu, u64 val) { - unsigned long mask = kvm_pmu_valid_counter_mask(vcpu); int i; if (val & ARMV8_PMU_PMCR_E) { kvm_pmu_enable_counter_mask(vcpu, - __vcpu_sys_reg(vcpu, PMCNTENSET_EL0) & mask); + __vcpu_sys_reg(vcpu, PMCNTENSET_EL0)); } else { - kvm_pmu_disable_counter_mask(vcpu, mask); + kvm_pmu_disable_counter_mask(vcpu, + __vcpu_sys_reg(vcpu, PMCNTENSET_EL0)); } if (val & ARMV8_PMU_PMCR_C) kvm_pmu_set_counter_value(vcpu, ARMV8_PMU_CYCLE_IDX, 0); if (val & ARMV8_PMU_PMCR_P) { + unsigned long mask = kvm_pmu_valid_counter_mask(vcpu); mask &= ~BIT(ARMV8_PMU_CYCLE_IDX); for_each_set_bit(i, &mask, 32) kvm_pmu_set_counter_value(vcpu, i, 0); @@ -745,7 +745,7 @@ int kvm_pmu_probe_pmuver(void) struct perf_event_attr attr = { }; struct perf_event *event; struct arm_pmu *pmu; - int pmuver = 0xf; + int pmuver = ID_AA64DFR0_PMUVER_IMP_DEF; /* * Create a dummy event that only counts user cycles. As we'll never @@ -770,7 +770,7 @@ int kvm_pmu_probe_pmuver(void) if (IS_ERR(event)) { pr_err_once("kvm: pmu event creation failed %ld\n", PTR_ERR(event)); - return 0xf; + return ID_AA64DFR0_PMUVER_IMP_DEF; } if (event->pmu) { @@ -923,7 +923,7 @@ int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr) if (!vcpu->kvm->arch.pmuver) vcpu->kvm->arch.pmuver = kvm_pmu_probe_pmuver(); - if (vcpu->kvm->arch.pmuver == 0xf) + if (vcpu->kvm->arch.pmuver == ID_AA64DFR0_PMUVER_IMP_DEF) return -ENODEV; switch (attr->attr) { diff --git a/arch/arm64/kvm/psci.c b/arch/arm64/kvm/psci.c index db4056ecccfd..74c47d420253 100644 --- a/arch/arm64/kvm/psci.c +++ b/arch/arm64/kvm/psci.c @@ -59,6 +59,12 @@ static void kvm_psci_vcpu_off(struct kvm_vcpu *vcpu) kvm_vcpu_kick(vcpu); } +static inline bool kvm_psci_valid_affinity(struct kvm_vcpu *vcpu, + unsigned long affinity) +{ + return !(affinity & ~MPIDR_HWID_BITMASK); +} + static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) { struct vcpu_reset_state *reset_state; @@ -66,9 +72,9 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) struct kvm_vcpu *vcpu = NULL; unsigned long cpu_id; - cpu_id = smccc_get_arg1(source_vcpu) & MPIDR_HWID_BITMASK; - if (vcpu_mode_is_32bit(source_vcpu)) - cpu_id &= ~((u32) 0); + cpu_id = smccc_get_arg1(source_vcpu); + if (!kvm_psci_valid_affinity(source_vcpu, cpu_id)) + return PSCI_RET_INVALID_PARAMS; vcpu = kvm_mpidr_to_vcpu(kvm, cpu_id); @@ -126,6 +132,9 @@ static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu) target_affinity = smccc_get_arg1(vcpu); lowest_affinity_level = smccc_get_arg2(vcpu); + if (!kvm_psci_valid_affinity(vcpu, target_affinity)) + return PSCI_RET_INVALID_PARAMS; + /* Determine target affinity mask */ target_affinity_mask = psci_affinity_mask(lowest_affinity_level); if (!target_affinity_mask) diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c index cba7872d69a8..5ce36b0a3343 100644 --- a/arch/arm64/kvm/reset.c +++ b/arch/arm64/kvm/reset.c @@ -210,10 +210,16 @@ static bool vcpu_allowed_register_width(struct kvm_vcpu *vcpu) */ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) { + struct vcpu_reset_state reset_state; int ret; bool loaded; u32 pstate; + mutex_lock(&vcpu->kvm->lock); + reset_state = vcpu->arch.reset_state; + WRITE_ONCE(vcpu->arch.reset_state.reset, false); + mutex_unlock(&vcpu->kvm->lock); + /* Reset PMU outside of the non-preemptible section */ kvm_pmu_vcpu_reset(vcpu); @@ -276,8 +282,8 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) * Additional reset state handling that PSCI may have imposed on us. * Must be done after all the sys_reg reset. */ - if (vcpu->arch.reset_state.reset) { - unsigned long target_pc = vcpu->arch.reset_state.pc; + if (reset_state.reset) { + unsigned long target_pc = reset_state.pc; /* Gracefully handle Thumb2 entry point */ if (vcpu_mode_is_32bit(vcpu) && (target_pc & 1)) { @@ -286,13 +292,11 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) } /* Propagate caller endianness */ - if (vcpu->arch.reset_state.be) + if (reset_state.be) kvm_vcpu_set_be(vcpu); *vcpu_pc(vcpu) = target_pc; - vcpu_set_reg(vcpu, 0, vcpu->arch.reset_state.r0); - - vcpu->arch.reset_state.reset = false; + vcpu_set_reg(vcpu, 0, reset_state.r0); } /* Reset timer */ @@ -311,31 +315,26 @@ u32 get_kvm_ipa_limit(void) int kvm_set_ipa_limit(void) { - unsigned int parange, tgran_2; + unsigned int parange; u64 mmfr0; mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1); parange = cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_PARANGE_SHIFT); + /* + * IPA size beyond 48 bits could not be supported + * on either 4K or 16K page size. Hence let's cap + * it to 48 bits, in case it's reported as larger + * on the system. + */ + if (PAGE_SIZE != SZ_64K) + parange = min(parange, (unsigned int)ID_AA64MMFR0_PARANGE_48); /* * Check with ARMv8.5-GTG that our PAGE_SIZE is supported at * Stage-2. If not, things will stop very quickly. */ - switch (PAGE_SIZE) { - default: - case SZ_4K: - tgran_2 = ID_AA64MMFR0_TGRAN4_2_SHIFT; - break; - case SZ_16K: - tgran_2 = ID_AA64MMFR0_TGRAN16_2_SHIFT; - break; - case SZ_64K: - tgran_2 = ID_AA64MMFR0_TGRAN64_2_SHIFT; - break; - } - - switch (cpuid_feature_extract_unsigned_field(mmfr0, tgran_2)) { + switch (cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_TGRAN_2_SHIFT)) { case ID_AA64MMFR0_TGRAN_2_SUPPORTED_NONE: kvm_err("PAGE_SIZE not supported at Stage-2, giving up\n"); return -EINVAL; @@ -369,7 +368,7 @@ int kvm_arm_setup_stage2(struct kvm *kvm, unsigned long type) phys_shift = KVM_VM_TYPE_ARM_IPA_SIZE(type); if (phys_shift) { if (phys_shift > kvm_ipa_limit || - phys_shift < 32) + phys_shift < ARM64_MIN_PARANGE_BITS) return -EINVAL; } else { phys_shift = KVM_PHYS_SHIFT; diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index f6f126eb6ac1..1d46e185f31e 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -44,10 +44,6 @@ * 64bit interface. */ -#define reg_to_encoding(x) \ - sys_reg((u32)(x)->Op0, (u32)(x)->Op1, \ - (u32)(x)->CRn, (u32)(x)->CRm, (u32)(x)->Op2) - static bool read_from_write_only(struct kvm_vcpu *vcpu, struct sys_reg_params *params, const struct sys_reg_desc *r) @@ -318,14 +314,14 @@ static bool trap_dbgauthstatus_el1(struct kvm_vcpu *vcpu, /* * We want to avoid world-switching all the DBG registers all the * time: - * + * * - If we've touched any debug register, it is likely that we're * going to touch more of them. It then makes sense to disable the * traps and start doing the save/restore dance * - If debug is active (DBG_MDSCR_KDE or DBG_MDSCR_MDE set), it is * then mandatory to save/restore the registers, as the guest * depends on them. - * + * * For this, we use a DIRTY bit, indicating the guest has modified the * debug registers, used as follow: * @@ -603,6 +599,41 @@ static unsigned int pmu_visibility(const struct kvm_vcpu *vcpu, return REG_HIDDEN; } +static void reset_pmu_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) +{ + u64 n, mask = BIT(ARMV8_PMU_CYCLE_IDX); + + /* No PMU available, any PMU reg may UNDEF... */ + if (!kvm_arm_support_pmu_v3()) + return; + + n = read_sysreg(pmcr_el0) >> ARMV8_PMU_PMCR_N_SHIFT; + n &= ARMV8_PMU_PMCR_N_MASK; + if (n) + mask |= GENMASK(n - 1, 0); + + reset_unknown(vcpu, r); + __vcpu_sys_reg(vcpu, r->reg) &= mask; +} + +static void reset_pmevcntr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) +{ + reset_unknown(vcpu, r); + __vcpu_sys_reg(vcpu, r->reg) &= GENMASK(31, 0); +} + +static void reset_pmevtyper(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) +{ + reset_unknown(vcpu, r); + __vcpu_sys_reg(vcpu, r->reg) &= ARMV8_PMU_EVTYPE_MASK; +} + +static void reset_pmselr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) +{ + reset_unknown(vcpu, r); + __vcpu_sys_reg(vcpu, r->reg) &= ARMV8_PMU_COUNTER_MASK; +} + static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) { u64 pmcr, val; @@ -845,7 +876,7 @@ static bool access_pmcnten(struct kvm_vcpu *vcpu, struct sys_reg_params *p, kvm_pmu_disable_counter_mask(vcpu, val); } } else { - p->regval = __vcpu_sys_reg(vcpu, PMCNTENSET_EL0) & mask; + p->regval = __vcpu_sys_reg(vcpu, PMCNTENSET_EL0); } return true; @@ -869,7 +900,7 @@ static bool access_pminten(struct kvm_vcpu *vcpu, struct sys_reg_params *p, /* accessing PMINTENCLR_EL1 */ __vcpu_sys_reg(vcpu, PMINTENSET_EL1) &= ~val; } else { - p->regval = __vcpu_sys_reg(vcpu, PMINTENSET_EL1) & mask; + p->regval = __vcpu_sys_reg(vcpu, PMINTENSET_EL1); } return true; @@ -891,7 +922,7 @@ static bool access_pmovs(struct kvm_vcpu *vcpu, struct sys_reg_params *p, /* accessing PMOVSCLR_EL0 */ __vcpu_sys_reg(vcpu, PMOVSSET_EL0) &= ~(p->regval & mask); } else { - p->regval = __vcpu_sys_reg(vcpu, PMOVSSET_EL0) & mask; + p->regval = __vcpu_sys_reg(vcpu, PMOVSSET_EL0); } return true; @@ -944,16 +975,18 @@ static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p, trap_wcr, reset_wcr, 0, 0, get_wcr, set_wcr } #define PMU_SYS_REG(r) \ - SYS_DESC(r), .reset = reset_unknown, .visibility = pmu_visibility + SYS_DESC(r), .reset = reset_pmu_reg, .visibility = pmu_visibility /* Macro to expand the PMEVCNTRn_EL0 register */ #define PMU_PMEVCNTR_EL0(n) \ { PMU_SYS_REG(SYS_PMEVCNTRn_EL0(n)), \ + .reset = reset_pmevcntr, \ .access = access_pmu_evcntr, .reg = (PMEVCNTR0_EL0 + n), } /* Macro to expand the PMEVTYPERn_EL0 register */ #define PMU_PMEVTYPER_EL0(n) \ { PMU_SYS_REG(SYS_PMEVTYPERn_EL0(n)), \ + .reset = reset_pmevtyper, \ .access = access_pmu_evtyper, .reg = (PMEVTYPER0_EL0 + n), } static bool undef_access(struct kvm_vcpu *vcpu, struct sys_reg_params *p, @@ -1026,8 +1059,6 @@ static bool access_arch_timer(struct kvm_vcpu *vcpu, return true; } -#define FEATURE(x) (GENMASK_ULL(x##_SHIFT + 3, x##_SHIFT)) - /* Read a sanitised cpufeature ID register by sys_reg_desc */ static u64 read_id_reg(const struct kvm_vcpu *vcpu, struct sys_reg_desc const *r, bool raz) @@ -1038,40 +1069,40 @@ static u64 read_id_reg(const struct kvm_vcpu *vcpu, switch (id) { case SYS_ID_AA64PFR0_EL1: if (!vcpu_has_sve(vcpu)) - val &= ~FEATURE(ID_AA64PFR0_SVE); - val &= ~FEATURE(ID_AA64PFR0_AMU); - val &= ~FEATURE(ID_AA64PFR0_CSV2); - val |= FIELD_PREP(FEATURE(ID_AA64PFR0_CSV2), (u64)vcpu->kvm->arch.pfr0_csv2); - val &= ~FEATURE(ID_AA64PFR0_CSV3); - val |= FIELD_PREP(FEATURE(ID_AA64PFR0_CSV3), (u64)vcpu->kvm->arch.pfr0_csv3); + val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_SVE); + val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_AMU); + val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_CSV2); + val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_CSV2), (u64)vcpu->kvm->arch.pfr0_csv2); + val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_CSV3); + val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_CSV3), (u64)vcpu->kvm->arch.pfr0_csv3); break; case SYS_ID_AA64PFR1_EL1: - val &= ~FEATURE(ID_AA64PFR1_MTE); + val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_MTE); if (kvm_has_mte(vcpu->kvm)) { u64 pfr, mte; pfr = read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1); mte = cpuid_feature_extract_unsigned_field(pfr, ID_AA64PFR1_MTE_SHIFT); - val |= FIELD_PREP(FEATURE(ID_AA64PFR1_MTE), mte); + val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR1_MTE), mte); } break; case SYS_ID_AA64ISAR1_EL1: if (!vcpu_has_ptrauth(vcpu)) - val &= ~(FEATURE(ID_AA64ISAR1_APA) | - FEATURE(ID_AA64ISAR1_API) | - FEATURE(ID_AA64ISAR1_GPA) | - FEATURE(ID_AA64ISAR1_GPI)); + val &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR1_APA) | + ARM64_FEATURE_MASK(ID_AA64ISAR1_API) | + ARM64_FEATURE_MASK(ID_AA64ISAR1_GPA) | + ARM64_FEATURE_MASK(ID_AA64ISAR1_GPI)); break; case SYS_ID_AA64DFR0_EL1: /* Limit debug to ARMv8.0 */ - val &= ~FEATURE(ID_AA64DFR0_DEBUGVER); - val |= FIELD_PREP(FEATURE(ID_AA64DFR0_DEBUGVER), 6); + val &= ~ARM64_FEATURE_MASK(ID_AA64DFR0_DEBUGVER); + val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64DFR0_DEBUGVER), 6); /* Limit guests to PMUv3 for ARMv8.4 */ val = cpuid_feature_cap_perfmon_field(val, ID_AA64DFR0_PMUVER_SHIFT, kvm_vcpu_has_pmu(vcpu) ? ID_AA64DFR0_PMUVER_8_4 : 0); /* Hide SPE from guests */ - val &= ~FEATURE(ID_AA64DFR0_PMSVER); + val &= ~ARM64_FEATURE_MASK(ID_AA64DFR0_PMSVER); break; case SYS_ID_DFR0_EL1: /* Limit guests to PMUv3 for ARMv8.4 */ @@ -1249,6 +1280,20 @@ static int set_raz_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd, return __set_id_reg(vcpu, rd, uaddr, true); } +static int set_wi_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd, + const struct kvm_one_reg *reg, void __user *uaddr) +{ + int err; + u64 val; + + /* Perform the access even if we are going to ignore the value */ + err = reg_from_user(&val, uaddr, sys_reg_to_index(rd)); + if (err) + return err; + + return 0; +} + static bool access_ctr(struct kvm_vcpu *vcpu, struct sys_reg_params *p, const struct sys_reg_desc *r) { @@ -1592,16 +1637,21 @@ static const struct sys_reg_desc sys_reg_descs[] = { .access = access_pmcnten, .reg = PMCNTENSET_EL0 }, { PMU_SYS_REG(SYS_PMOVSCLR_EL0), .access = access_pmovs, .reg = PMOVSSET_EL0 }, + /* + * PM_SWINC_EL0 is exposed to userspace as RAZ/WI, as it was + * previously (and pointlessly) advertised in the past... + */ { PMU_SYS_REG(SYS_PMSWINC_EL0), - .access = access_pmswinc, .reg = PMSWINC_EL0 }, + .get_user = get_raz_id_reg, .set_user = set_wi_reg, + .access = access_pmswinc, .reset = NULL }, { PMU_SYS_REG(SYS_PMSELR_EL0), - .access = access_pmselr, .reg = PMSELR_EL0 }, + .access = access_pmselr, .reset = reset_pmselr, .reg = PMSELR_EL0 }, { PMU_SYS_REG(SYS_PMCEID0_EL0), .access = access_pmceid, .reset = NULL }, { PMU_SYS_REG(SYS_PMCEID1_EL0), .access = access_pmceid, .reset = NULL }, { PMU_SYS_REG(SYS_PMCCNTR_EL0), - .access = access_pmu_evcntr, .reg = PMCCNTR_EL0 }, + .access = access_pmu_evcntr, .reset = reset_unknown, .reg = PMCCNTR_EL0 }, { PMU_SYS_REG(SYS_PMXEVTYPER_EL0), .access = access_pmu_evtyper, .reset = NULL }, { PMU_SYS_REG(SYS_PMXEVCNTR_EL0), @@ -2106,23 +2156,6 @@ static int check_sysreg_table(const struct sys_reg_desc *table, unsigned int n, return 0; } -static int match_sys_reg(const void *key, const void *elt) -{ - const unsigned long pval = (unsigned long)key; - const struct sys_reg_desc *r = elt; - - return pval - reg_to_encoding(r); -} - -static const struct sys_reg_desc *find_reg(const struct sys_reg_params *params, - const struct sys_reg_desc table[], - unsigned int num) -{ - unsigned long pval = reg_to_encoding(params); - - return bsearch((void *)pval, table, num, sizeof(table[0]), match_sys_reg); -} - int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu) { kvm_inject_undefined(vcpu); @@ -2365,13 +2398,8 @@ int kvm_handle_sys_reg(struct kvm_vcpu *vcpu) trace_kvm_handle_sys_reg(esr); - params.Op0 = (esr >> 20) & 3; - params.Op1 = (esr >> 14) & 0x7; - params.CRn = (esr >> 10) & 0xf; - params.CRm = (esr >> 1) & 0xf; - params.Op2 = (esr >> 17) & 0x7; + params = esr_sys64_to_params(esr); params.regval = vcpu_get_reg(vcpu, Rt); - params.is_write = !(esr & 1); ret = emulate_sys_reg(vcpu, ¶ms); diff --git a/arch/arm64/kvm/sys_regs.h b/arch/arm64/kvm/sys_regs.h index 9d0621417c2a..cc0cc95a0280 100644 --- a/arch/arm64/kvm/sys_regs.h +++ b/arch/arm64/kvm/sys_regs.h @@ -11,6 +11,12 @@ #ifndef __ARM64_KVM_SYS_REGS_LOCAL_H__ #define __ARM64_KVM_SYS_REGS_LOCAL_H__ +#include <linux/bsearch.h> + +#define reg_to_encoding(x) \ + sys_reg((u32)(x)->Op0, (u32)(x)->Op1, \ + (u32)(x)->CRn, (u32)(x)->CRm, (u32)(x)->Op2) + struct sys_reg_params { u8 Op0; u8 Op1; @@ -21,6 +27,14 @@ struct sys_reg_params { bool is_write; }; +#define esr_sys64_to_params(esr) \ + ((struct sys_reg_params){ .Op0 = ((esr) >> 20) & 3, \ + .Op1 = ((esr) >> 14) & 0x7, \ + .CRn = ((esr) >> 10) & 0xf, \ + .CRm = ((esr) >> 1) & 0xf, \ + .Op2 = ((esr) >> 17) & 0x7, \ + .is_write = !((esr) & 1) }) + struct sys_reg_desc { /* Sysreg string for debug */ const char *name; @@ -152,6 +166,23 @@ static inline int cmp_sys_reg(const struct sys_reg_desc *i1, return i1->Op2 - i2->Op2; } +static inline int match_sys_reg(const void *key, const void *elt) +{ + const unsigned long pval = (unsigned long)key; + const struct sys_reg_desc *r = elt; + + return pval - reg_to_encoding(r); +} + +static inline const struct sys_reg_desc * +find_reg(const struct sys_reg_params *params, const struct sys_reg_desc table[], + unsigned int num) +{ + unsigned long pval = reg_to_encoding(params); + + return __inline_bsearch((void *)pval, table, num, sizeof(table[0]), match_sys_reg); +} + const struct sys_reg_desc *find_reg_by_id(u64 id, struct sys_reg_params *params, const struct sys_reg_desc table[], diff --git a/arch/arm64/kvm/trace_handle_exit.h b/arch/arm64/kvm/trace_handle_exit.h index 8d78acc4fba7..064a58c19f48 100644 --- a/arch/arm64/kvm/trace_handle_exit.h +++ b/arch/arm64/kvm/trace_handle_exit.h @@ -78,13 +78,17 @@ TRACE_EVENT(kvm_arm_clear_debug, TP_printk("flags: 0x%08x", __entry->guest_debug) ); +/* + * The dreg32 name is a leftover from a distant past. This will really + * output a 64bit value... + */ TRACE_EVENT(kvm_arm_set_dreg32, - TP_PROTO(const char *name, __u32 value), + TP_PROTO(const char *name, __u64 value), TP_ARGS(name, value), TP_STRUCT__entry( __field(const char *, name) - __field(__u32, value) + __field(__u64, value) ), TP_fast_assign( @@ -92,7 +96,7 @@ TRACE_EVENT(kvm_arm_set_dreg32, __entry->value = value; ), - TP_printk("%s: 0x%08x", __entry->name, __entry->value) + TP_printk("%s: 0x%llx", __entry->name, __entry->value) ); TRACE_DEFINE_SIZEOF(__u64); diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v2.c b/arch/arm64/kvm/vgic/vgic-mmio-v2.c index a016f07adc28..5f9014ae595b 100644 --- a/arch/arm64/kvm/vgic/vgic-mmio-v2.c +++ b/arch/arm64/kvm/vgic/vgic-mmio-v2.c @@ -282,7 +282,7 @@ static unsigned long vgic_mmio_read_vcpuif(struct kvm_vcpu *vcpu, case GIC_CPU_PRIMASK: /* * Our KVM_DEV_TYPE_ARM_VGIC_V2 device ABI exports the - * the PMR field as GICH_VMCR.VMPriMask rather than + * PMR field as GICH_VMCR.VMPriMask rather than * GICC_PMR.Priority, so we expose the upper five bits of * priority mask to userspace using the lower bits in the * unsigned long. @@ -329,7 +329,7 @@ static void vgic_mmio_write_vcpuif(struct kvm_vcpu *vcpu, case GIC_CPU_PRIMASK: /* * Our KVM_DEV_TYPE_ARM_VGIC_V2 device ABI exports the - * the PMR field as GICH_VMCR.VMPriMask rather than + * PMR field as GICH_VMCR.VMPriMask rather than * GICC_PMR.Priority, so we expose the upper five bits of * priority mask to userspace using the lower bits in the * unsigned long. diff --git a/arch/arm64/kvm/vgic/vgic-v2.c b/arch/arm64/kvm/vgic/vgic-v2.c index 2c580204f1dc..95a18cec14a3 100644 --- a/arch/arm64/kvm/vgic/vgic-v2.c +++ b/arch/arm64/kvm/vgic/vgic-v2.c @@ -60,6 +60,7 @@ void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu) u32 val = cpuif->vgic_lr[lr]; u32 cpuid, intid = val & GICH_LR_VIRTUALID; struct vgic_irq *irq; + bool deactivated; /* Extract the source vCPU id from the LR */ cpuid = val & GICH_LR_PHYSID_CPUID; @@ -75,7 +76,8 @@ void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu) raw_spin_lock(&irq->irq_lock); - /* Always preserve the active bit */ + /* Always preserve the active bit, note deactivation */ + deactivated = irq->active && !(val & GICH_LR_ACTIVE_BIT); irq->active = !!(val & GICH_LR_ACTIVE_BIT); if (irq->active && vgic_irq_is_sgi(intid)) @@ -96,36 +98,8 @@ void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu) if (irq->config == VGIC_CONFIG_LEVEL && !(val & GICH_LR_STATE)) irq->pending_latch = false; - /* - * Level-triggered mapped IRQs are special because we only - * observe rising edges as input to the VGIC. - * - * If the guest never acked the interrupt we have to sample - * the physical line and set the line level, because the - * device state could have changed or we simply need to - * process the still pending interrupt later. - * - * If this causes us to lower the level, we have to also clear - * the physical active state, since we will otherwise never be - * told when the interrupt becomes asserted again. - * - * Another case is when the interrupt requires a helping hand - * on deactivation (no HW deactivation, for example). - */ - if (vgic_irq_is_mapped_level(irq)) { - bool resample = false; - - if (val & GICH_LR_PENDING_BIT) { - irq->line_level = vgic_get_phys_line_level(irq); - resample = !irq->line_level; - } else if (vgic_irq_needs_resampling(irq) && - !(irq->active || irq->pending_latch)) { - resample = true; - } - - if (resample) - vgic_irq_set_phys_active(irq, false); - } + /* Handle resampling for mapped interrupts if required */ + vgic_irq_handle_resampling(irq, deactivated, val & GICH_LR_PENDING_BIT); raw_spin_unlock(&irq->irq_lock); vgic_put_irq(vcpu->kvm, irq); diff --git a/arch/arm64/kvm/vgic/vgic-v3.c b/arch/arm64/kvm/vgic/vgic-v3.c index 66004f61cd83..21a6207fb2ee 100644 --- a/arch/arm64/kvm/vgic/vgic-v3.c +++ b/arch/arm64/kvm/vgic/vgic-v3.c @@ -46,6 +46,7 @@ void vgic_v3_fold_lr_state(struct kvm_vcpu *vcpu) u32 intid, cpuid; struct vgic_irq *irq; bool is_v2_sgi = false; + bool deactivated; cpuid = val & GICH_LR_PHYSID_CPUID; cpuid >>= GICH_LR_PHYSID_CPUID_SHIFT; @@ -68,7 +69,8 @@ void vgic_v3_fold_lr_state(struct kvm_vcpu *vcpu) raw_spin_lock(&irq->irq_lock); - /* Always preserve the active bit */ + /* Always preserve the active bit, note deactivation */ + deactivated = irq->active && !(val & ICH_LR_ACTIVE_BIT); irq->active = !!(val & ICH_LR_ACTIVE_BIT); if (irq->active && is_v2_sgi) @@ -89,36 +91,8 @@ void vgic_v3_fold_lr_state(struct kvm_vcpu *vcpu) if (irq->config == VGIC_CONFIG_LEVEL && !(val & ICH_LR_STATE)) irq->pending_latch = false; - /* - * Level-triggered mapped IRQs are special because we only - * observe rising edges as input to the VGIC. - * - * If the guest never acked the interrupt we have to sample - * the physical line and set the line level, because the - * device state could have changed or we simply need to - * process the still pending interrupt later. - * - * If this causes us to lower the level, we have to also clear - * the physical active state, since we will otherwise never be - * told when the interrupt becomes asserted again. - * - * Another case is when the interrupt requires a helping hand - * on deactivation (no HW deactivation, for example). - */ - if (vgic_irq_is_mapped_level(irq)) { - bool resample = false; - - if (val & ICH_LR_PENDING_BIT) { - irq->line_level = vgic_get_phys_line_level(irq); - resample = !irq->line_level; - } else if (vgic_irq_needs_resampling(irq) && - !(irq->active || irq->pending_latch)) { - resample = true; - } - - if (resample) - vgic_irq_set_phys_active(irq, false); - } + /* Handle resampling for mapped interrupts if required */ + vgic_irq_handle_resampling(irq, deactivated, val & ICH_LR_PENDING_BIT); raw_spin_unlock(&irq->irq_lock); vgic_put_irq(vcpu->kvm, irq); diff --git a/arch/arm64/kvm/vgic/vgic.c b/arch/arm64/kvm/vgic/vgic.c index 111bff47e471..5dad4996cfb2 100644 --- a/arch/arm64/kvm/vgic/vgic.c +++ b/arch/arm64/kvm/vgic/vgic.c @@ -106,7 +106,6 @@ struct vgic_irq *vgic_get_irq(struct kvm *kvm, struct kvm_vcpu *vcpu, if (intid >= VGIC_MIN_LPI) return vgic_get_lpi(kvm, intid); - WARN(1, "Looking up struct vgic_irq for reserved INTID"); return NULL; } @@ -1022,3 +1021,41 @@ bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu, unsigned int vintid) return map_is_active; } + +/* + * Level-triggered mapped IRQs are special because we only observe rising + * edges as input to the VGIC. + * + * If the guest never acked the interrupt we have to sample the physical + * line and set the line level, because the device state could have changed + * or we simply need to process the still pending interrupt later. + * + * We could also have entered the guest with the interrupt active+pending. + * On the next exit, we need to re-evaluate the pending state, as it could + * otherwise result in a spurious interrupt by injecting a now potentially + * stale pending state. + * + * If this causes us to lower the level, we have to also clear the physical + * active state, since we will otherwise never be told when the interrupt + * becomes asserted again. + * + * Another case is when the interrupt requires a helping hand on + * deactivation (no HW deactivation, for example). + */ +void vgic_irq_handle_resampling(struct vgic_irq *irq, + bool lr_deactivated, bool lr_pending) +{ + if (vgic_irq_is_mapped_level(irq)) { + bool resample = false; + + if (unlikely(vgic_irq_needs_resampling(irq))) { + resample = !(irq->active || irq->pending_latch); + } else if (lr_pending || (lr_deactivated && irq->line_level)) { + irq->line_level = vgic_get_phys_line_level(irq); + resample = !irq->line_level; + } + + if (resample) + vgic_irq_set_phys_active(irq, false); + } +} diff --git a/arch/arm64/kvm/vgic/vgic.h b/arch/arm64/kvm/vgic/vgic.h index dc1f3d1657ee..14a9218641f5 100644 --- a/arch/arm64/kvm/vgic/vgic.h +++ b/arch/arm64/kvm/vgic/vgic.h @@ -169,6 +169,8 @@ void vgic_irq_set_phys_active(struct vgic_irq *irq, bool active); bool vgic_queue_irq_unlock(struct kvm *kvm, struct vgic_irq *irq, unsigned long flags); void vgic_kick_vcpus(struct kvm *kvm); +void vgic_irq_handle_resampling(struct vgic_irq *irq, + bool lr_deactivated, bool lr_pending); int vgic_check_ioaddr(struct kvm *kvm, phys_addr_t *ioaddr, phys_addr_t addr, phys_addr_t alignment); diff --git a/arch/arm64/lib/Makefile b/arch/arm64/lib/Makefile index 6dd56a49790a..0941180a86d3 100644 --- a/arch/arm64/lib/Makefile +++ b/arch/arm64/lib/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 lib-y := clear_user.o delay.o copy_from_user.o \ - copy_to_user.o copy_in_user.o copy_page.o \ + copy_to_user.o copy_page.o \ clear_page.o csum.o insn.o memchr.o memcpy.o \ memset.o memcmp.o strcmp.o strncmp.o strlen.o \ strnlen.o strchr.o strrchr.o tishift.o diff --git a/arch/arm64/lib/copy_from_user.S b/arch/arm64/lib/copy_from_user.S index 95cd62d67371..2cf999e41d30 100644 --- a/arch/arm64/lib/copy_from_user.S +++ b/arch/arm64/lib/copy_from_user.S @@ -29,7 +29,7 @@ .endm .macro ldrh1 reg, ptr, val - user_ldst 9998f, ldtrh, \reg, \ptr, \val + user_ldst 9997f, ldtrh, \reg, \ptr, \val .endm .macro strh1 reg, ptr, val @@ -37,7 +37,7 @@ .endm .macro ldr1 reg, ptr, val - user_ldst 9998f, ldtr, \reg, \ptr, \val + user_ldst 9997f, ldtr, \reg, \ptr, \val .endm .macro str1 reg, ptr, val @@ -45,7 +45,7 @@ .endm .macro ldp1 reg1, reg2, ptr, val - user_ldp 9998f, \reg1, \reg2, \ptr, \val + user_ldp 9997f, \reg1, \reg2, \ptr, \val .endm .macro stp1 reg1, reg2, ptr, val @@ -53,8 +53,10 @@ .endm end .req x5 +srcin .req x15 SYM_FUNC_START(__arch_copy_from_user) add end, x0, x2 + mov srcin, x1 #include "copy_template.S" mov x0, #0 // Nothing to copy ret @@ -63,6 +65,11 @@ EXPORT_SYMBOL(__arch_copy_from_user) .section .fixup,"ax" .align 2 +9997: cmp dst, dstin + b.ne 9998f + // Before being absolutely sure we couldn't copy anything, try harder +USER(9998f, ldtrb tmp1w, [srcin]) + strb tmp1w, [dst], #1 9998: sub x0, end, dst // bytes not copied ret .previous diff --git a/arch/arm64/lib/copy_in_user.S b/arch/arm64/lib/copy_in_user.S deleted file mode 100644 index 1f61cd0df062..000000000000 --- a/arch/arm64/lib/copy_in_user.S +++ /dev/null @@ -1,70 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copy from user space to user space - * - * Copyright (C) 2012 ARM Ltd. - */ - -#include <linux/linkage.h> - -#include <asm/asm-uaccess.h> -#include <asm/assembler.h> -#include <asm/cache.h> - -/* - * Copy from user space to user space (alignment handled by the hardware) - * - * Parameters: - * x0 - to - * x1 - from - * x2 - n - * Returns: - * x0 - bytes not copied - */ - .macro ldrb1 reg, ptr, val - user_ldst 9998f, ldtrb, \reg, \ptr, \val - .endm - - .macro strb1 reg, ptr, val - user_ldst 9998f, sttrb, \reg, \ptr, \val - .endm - - .macro ldrh1 reg, ptr, val - user_ldst 9998f, ldtrh, \reg, \ptr, \val - .endm - - .macro strh1 reg, ptr, val - user_ldst 9998f, sttrh, \reg, \ptr, \val - .endm - - .macro ldr1 reg, ptr, val - user_ldst 9998f, ldtr, \reg, \ptr, \val - .endm - - .macro str1 reg, ptr, val - user_ldst 9998f, sttr, \reg, \ptr, \val - .endm - - .macro ldp1 reg1, reg2, ptr, val - user_ldp 9998f, \reg1, \reg2, \ptr, \val - .endm - - .macro stp1 reg1, reg2, ptr, val - user_stp 9998f, \reg1, \reg2, \ptr, \val - .endm - -end .req x5 - -SYM_FUNC_START(__arch_copy_in_user) - add end, x0, x2 -#include "copy_template.S" - mov x0, #0 - ret -SYM_FUNC_END(__arch_copy_in_user) -EXPORT_SYMBOL(__arch_copy_in_user) - - .section .fixup,"ax" - .align 2 -9998: sub x0, end, dst // bytes not copied - ret - .previous diff --git a/arch/arm64/lib/copy_to_user.S b/arch/arm64/lib/copy_to_user.S index 043da90f5dd7..9f380eecf653 100644 --- a/arch/arm64/lib/copy_to_user.S +++ b/arch/arm64/lib/copy_to_user.S @@ -32,7 +32,7 @@ .endm .macro strh1 reg, ptr, val - user_ldst 9998f, sttrh, \reg, \ptr, \val + user_ldst 9997f, sttrh, \reg, \ptr, \val .endm .macro ldr1 reg, ptr, val @@ -40,7 +40,7 @@ .endm .macro str1 reg, ptr, val - user_ldst 9998f, sttr, \reg, \ptr, \val + user_ldst 9997f, sttr, \reg, \ptr, \val .endm .macro ldp1 reg1, reg2, ptr, val @@ -48,12 +48,14 @@ .endm .macro stp1 reg1, reg2, ptr, val - user_stp 9998f, \reg1, \reg2, \ptr, \val + user_stp 9997f, \reg1, \reg2, \ptr, \val .endm end .req x5 +srcin .req x15 SYM_FUNC_START(__arch_copy_to_user) add end, x0, x2 + mov srcin, x1 #include "copy_template.S" mov x0, #0 ret @@ -62,6 +64,12 @@ EXPORT_SYMBOL(__arch_copy_to_user) .section .fixup,"ax" .align 2 +9997: cmp dst, dstin + b.ne 9998f + // Before being absolutely sure we couldn't copy anything, try harder + ldrb tmp1w, [srcin] +USER(9998f, sttrb tmp1w, [dst]) + add dst, dst, #1 9998: sub x0, end, dst // bytes not copied ret .previous diff --git a/arch/arm64/lib/insn.c b/arch/arm64/lib/insn.c index b506a4b1e38c..fccfe363e567 100644 --- a/arch/arm64/lib/insn.c +++ b/arch/arm64/lib/insn.c @@ -185,7 +185,7 @@ u64 aarch64_insn_decode_immediate(enum aarch64_insn_imm_type type, u32 insn) break; default: if (aarch64_get_imm_shift_mask(type, &mask, &shift) < 0) { - pr_err("aarch64_insn_decode_immediate: unknown immediate encoding %d\n", + pr_err("%s: unknown immediate encoding %d\n", __func__, type); return 0; } @@ -215,7 +215,7 @@ u32 __kprobes aarch64_insn_encode_immediate(enum aarch64_insn_imm_type type, break; default: if (aarch64_get_imm_shift_mask(type, &mask, &shift) < 0) { - pr_err("aarch64_insn_encode_immediate: unknown immediate encoding %d\n", + pr_err("%s: unknown immediate encoding %d\n", __func__, type); return AARCH64_BREAK_FAULT; } diff --git a/arch/arm64/lib/strlen.S b/arch/arm64/lib/strlen.S index 35fbdb7d6e1a..1648790e91b3 100644 --- a/arch/arm64/lib/strlen.S +++ b/arch/arm64/lib/strlen.S @@ -8,6 +8,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/mte-def.h> /* Assumptions: * @@ -42,7 +43,16 @@ #define REP8_7f 0x7f7f7f7f7f7f7f7f #define REP8_80 0x8080808080808080 +/* + * When KASAN_HW_TAGS is in use, memory is checked at MTE_GRANULE_SIZE + * (16-byte) granularity, and we must ensure that no access straddles this + * alignment boundary. + */ +#ifdef CONFIG_KASAN_HW_TAGS +#define MIN_PAGE_SIZE MTE_GRANULE_SIZE +#else #define MIN_PAGE_SIZE 4096 +#endif /* Since strings are short on average, we check the first 16 bytes of the string for a NUL character. In order to do an unaligned ldp diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 349c488765ca..9ae24e3b72be 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -309,24 +309,11 @@ static void die_kernel_fault(const char *msg, unsigned long addr, static void report_tag_fault(unsigned long addr, unsigned int esr, struct pt_regs *regs) { - static bool reported; - bool is_write; - - if (READ_ONCE(reported)) - return; - - /* - * This is used for KASAN tests and assumes that no MTE faults - * happened before running the tests. - */ - if (mte_report_once()) - WRITE_ONCE(reported, true); - /* * SAS bits aren't set for all faults reported in EL1, so we can't * find out access size. */ - is_write = !!(esr & ESR_ELx_WNR); + bool is_write = !!(esr & ESR_ELx_WNR); kasan_report(addr, 0, is_write, regs->pc); } #else diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 8490ed2917ff..b16be52233c6 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -74,6 +74,7 @@ phys_addr_t arm64_dma_phys_limit __ro_after_init; static void __init reserve_crashkernel(void) { unsigned long long crash_base, crash_size; + unsigned long long crash_max = arm64_dma_phys_limit; int ret; ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(), @@ -84,33 +85,18 @@ static void __init reserve_crashkernel(void) crash_size = PAGE_ALIGN(crash_size); - if (crash_base == 0) { - /* Current arm64 boot protocol requires 2MB alignment */ - crash_base = memblock_find_in_range(0, arm64_dma_phys_limit, - crash_size, SZ_2M); - if (crash_base == 0) { - pr_warn("cannot allocate crashkernel (size:0x%llx)\n", - crash_size); - return; - } - } else { - /* User specifies base address explicitly. */ - if (!memblock_is_region_memory(crash_base, crash_size)) { - pr_warn("cannot reserve crashkernel: region is not memory\n"); - return; - } - - if (memblock_is_region_reserved(crash_base, crash_size)) { - pr_warn("cannot reserve crashkernel: region overlaps reserved memory\n"); - return; - } + /* User specifies base address explicitly. */ + if (crash_base) + crash_max = crash_base + crash_size; - if (!IS_ALIGNED(crash_base, SZ_2M)) { - pr_warn("cannot reserve crashkernel: base address is not 2MB aligned\n"); - return; - } + /* Current arm64 boot protocol requires 2MB alignment */ + crash_base = memblock_phys_alloc_range(crash_size, SZ_2M, + crash_base, crash_max); + if (!crash_base) { + pr_warn("cannot allocate crashkernel (size:0x%llx)\n", + crash_size); + return; } - memblock_reserve(crash_base, crash_size); pr_info("crashkernel reserved: 0x%016llx - 0x%016llx (%lld MB)\n", crash_base, crash_base + crash_size, crash_size >> 20); @@ -124,57 +110,6 @@ static void __init reserve_crashkernel(void) } #endif /* CONFIG_KEXEC_CORE */ -#ifdef CONFIG_CRASH_DUMP -static int __init early_init_dt_scan_elfcorehdr(unsigned long node, - const char *uname, int depth, void *data) -{ - const __be32 *reg; - int len; - - if (depth != 1 || strcmp(uname, "chosen") != 0) - return 0; - - reg = of_get_flat_dt_prop(node, "linux,elfcorehdr", &len); - if (!reg || (len < (dt_root_addr_cells + dt_root_size_cells))) - return 1; - - elfcorehdr_addr = dt_mem_next_cell(dt_root_addr_cells, ®); - elfcorehdr_size = dt_mem_next_cell(dt_root_size_cells, ®); - - return 1; -} - -/* - * reserve_elfcorehdr() - reserves memory for elf core header - * - * This function reserves the memory occupied by an elf core header - * described in the device tree. This region contains all the - * information about primary kernel's core image and is used by a dump - * capture kernel to access the system memory on primary kernel. - */ -static void __init reserve_elfcorehdr(void) -{ - of_scan_flat_dt(early_init_dt_scan_elfcorehdr, NULL); - - if (!elfcorehdr_size) - return; - - if (memblock_is_region_reserved(elfcorehdr_addr, elfcorehdr_size)) { - pr_warn("elfcorehdr is overlapped\n"); - return; - } - - memblock_reserve(elfcorehdr_addr, elfcorehdr_size); - - pr_info("Reserving %lldKB of memory at 0x%llx for elfcorehdr\n", - elfcorehdr_size >> 10, elfcorehdr_addr); -} -#else -static void __init reserve_elfcorehdr(void) -{ -} -#endif /* CONFIG_CRASH_DUMP */ - /* * Return the maximum physical address for a zone accessible by the given bits * limit. If DRAM starts above 32-bit, expand the zone to the maximum @@ -219,6 +154,43 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max) free_area_init(max_zone_pfns); } +int pfn_valid(unsigned long pfn) +{ + phys_addr_t addr = PFN_PHYS(pfn); + struct mem_section *ms; + + /* + * Ensure the upper PAGE_SHIFT bits are clear in the + * pfn. Else it might lead to false positives when + * some of the upper bits are set, but the lower bits + * match a valid pfn. + */ + if (PHYS_PFN(addr) != pfn) + return 0; + + if (pfn_to_section_nr(pfn) >= NR_MEM_SECTIONS) + return 0; + + ms = __pfn_to_section(pfn); + if (!valid_section(ms)) + return 0; + + /* + * ZONE_DEVICE memory does not have the memblock entries. + * memblock_is_map_memory() check for ZONE_DEVICE based + * addresses will always fail. Even the normal hotplugged + * memory will never have MEMBLOCK_NOMAP flag set in their + * memblock entries. Skip memblock search for all non early + * memory sections covering all of hotplug memory including + * both normal and ZONE_DEVICE based. + */ + if (!early_section(ms)) + return pfn_section_valid(ms, pfn); + + return memblock_is_memory(addr); +} +EXPORT_SYMBOL(pfn_valid); + int pfn_is_map_memory(unsigned long pfn) { phys_addr_t addr = PFN_PHYS(pfn); @@ -248,45 +220,10 @@ static int __init early_mem(char *p) } early_param("mem", early_mem); -static int __init early_init_dt_scan_usablemem(unsigned long node, - const char *uname, int depth, void *data) -{ - struct memblock_region *usablemem = data; - const __be32 *reg; - int len; - - if (depth != 1 || strcmp(uname, "chosen") != 0) - return 0; - - reg = of_get_flat_dt_prop(node, "linux,usable-memory-range", &len); - if (!reg || (len < (dt_root_addr_cells + dt_root_size_cells))) - return 1; - - usablemem->base = dt_mem_next_cell(dt_root_addr_cells, ®); - usablemem->size = dt_mem_next_cell(dt_root_size_cells, ®); - - return 1; -} - -static void __init fdt_enforce_memory_region(void) -{ - struct memblock_region reg = { - .size = 0, - }; - - of_scan_flat_dt(early_init_dt_scan_usablemem, ®); - - if (reg.size) - memblock_cap_memory_range(reg.base, reg.size); -} - void __init arm64_memblock_init(void) { const s64 linear_region_size = PAGE_END - _PAGE_OFFSET(vabits_actual); - /* Handle linux,usable-memory-range property */ - fdt_enforce_memory_region(); - /* Remove memory above our supported physical address size */ memblock_remove(1ULL << PHYS_MASK_SHIFT, ULLONG_MAX); @@ -395,8 +332,6 @@ void __init arm64_memblock_init(void) early_init_fdt_scan_reserved_mem(); - reserve_elfcorehdr(); - high_memory = __va(memblock_end_of_DRAM() - 1) + 1; } diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index d74586508448..cfd9deb347c3 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -1339,7 +1339,6 @@ void *__init fixmap_remap_fdt(phys_addr_t dt_phys, int *size, pgprot_t prot) return dt_virt; } -#if CONFIG_PGTABLE_LEVELS > 3 int pud_set_huge(pud_t *pudp, phys_addr_t phys, pgprot_t prot) { pud_t new_pud = pfn_pud(__phys_to_pfn(phys), mk_pud_sect_prot(prot)); @@ -1354,16 +1353,6 @@ int pud_set_huge(pud_t *pudp, phys_addr_t phys, pgprot_t prot) return 1; } -int pud_clear_huge(pud_t *pudp) -{ - if (!pud_sect(READ_ONCE(*pudp))) - return 0; - pud_clear(pudp); - return 1; -} -#endif - -#if CONFIG_PGTABLE_LEVELS > 2 int pmd_set_huge(pmd_t *pmdp, phys_addr_t phys, pgprot_t prot) { pmd_t new_pmd = pfn_pmd(__phys_to_pfn(phys), mk_pmd_sect_prot(prot)); @@ -1378,6 +1367,14 @@ int pmd_set_huge(pmd_t *pmdp, phys_addr_t phys, pgprot_t prot) return 1; } +int pud_clear_huge(pud_t *pudp) +{ + if (!pud_sect(READ_ONCE(*pudp))) + return 0; + pud_clear(pudp); + return 1; +} + int pmd_clear_huge(pmd_t *pmdp) { if (!pmd_sect(READ_ONCE(*pmdp))) @@ -1385,7 +1382,6 @@ int pmd_clear_huge(pmd_t *pmdp) pmd_clear(pmdp); return 1; } -#endif int pmd_free_pte_page(pmd_t *pmdp, unsigned long addr) { @@ -1506,8 +1502,7 @@ int arch_add_memory(int nid, u64 start, u64 size, return ret; } -void arch_remove_memory(int nid, u64 start, u64 size, - struct vmem_altmap *altmap) +void arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap) { unsigned long start_pfn = start >> PAGE_SHIFT; unsigned long nr_pages = size >> PAGE_SHIFT; diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index 35936c5ae1ce..d35c90d2e47a 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -437,8 +437,7 @@ SYM_FUNC_START(__cpu_setup) mov x10, #MAIR_ATTR_NORMAL_TAGGED bfi mair, x10, #(8 * MT_NORMAL_TAGGED), #8 - /* initialize GCR_EL1: all non-zero tags excluded by default */ - mov x10, #(SYS_GCR_EL1_RRND | SYS_GCR_EL1_EXCL_MASK) + mov x10, #KERNEL_GCR_EL1 msr_s SYS_GCR_EL1, x10 /* diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c index dccf98a37283..41c23f474ea6 100644 --- a/arch/arm64/net/bpf_jit_comp.c +++ b/arch/arm64/net/bpf_jit_comp.c @@ -823,6 +823,19 @@ emit_cond_jmp: return ret; break; + /* speculation barrier */ + case BPF_ST | BPF_NOSPEC: + /* + * Nothing required here. + * + * In case of arm64, we rely on the firmware mitigation of + * Speculative Store Bypass as controlled via the ssbd kernel + * parameter. Whenever the mitigation is enabled, it works + * for all of the kernel code with no need to provide any + * additional instructions. + */ + break; + /* ST: *(size *)(dst + off) = imm */ case BPF_ST | BPF_MEM | BPF_W: case BPF_ST | BPF_MEM | BPF_H: |