summaryrefslogtreecommitdiff
path: root/arch/m68k/platform/68360
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68k/platform/68360')
-rw-r--r--arch/m68k/platform/68360/Makefile10
-rw-r--r--arch/m68k/platform/68360/commproc.c308
-rw-r--r--arch/m68k/platform/68360/config.c186
-rw-r--r--arch/m68k/platform/68360/entry.S184
-rw-r--r--arch/m68k/platform/68360/head-ram.S403
-rw-r--r--arch/m68k/platform/68360/head-rom.S414
-rw-r--r--arch/m68k/platform/68360/ints.c139
7 files changed, 1644 insertions, 0 deletions
diff --git a/arch/m68k/platform/68360/Makefile b/arch/m68k/platform/68360/Makefile
new file mode 100644
index 000000000000..cf5af73a5789
--- /dev/null
+++ b/arch/m68k/platform/68360/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for arch/m68knommu/platform/68360.
+#
+
+obj-y := config.o commproc.o entry.o ints.o
+
+extra-y := head.o
+
+$(obj)/head.o: $(obj)/head-$(MODEL).o
+ ln -sf head-$(MODEL).o $(obj)/head.o
diff --git a/arch/m68k/platform/68360/commproc.c b/arch/m68k/platform/68360/commproc.c
new file mode 100644
index 000000000000..8e4e10cc0080
--- /dev/null
+++ b/arch/m68k/platform/68360/commproc.c
@@ -0,0 +1,308 @@
+/*
+ * General Purpose functions for the global management of the
+ * Communication Processor Module.
+ *
+ * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com>
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * In addition to the individual control of the communication
+ * channels, there are a few functions that globally affect the
+ * communication processor.
+ *
+ * Buffer descriptors must be allocated from the dual ported memory
+ * space. The allocator for that is here. When the communication
+ * process is reset, we reclaim the memory available. There is
+ * currently no deallocator for this memory.
+ * The amount of space available is platform dependent. On the
+ * MBX, the EPPC software loads additional microcode into the
+ * communication processor, and uses some of the DP ram for this
+ * purpose. Current, the first 512 bytes and the last 256 bytes of
+ * memory are used. Right now I am conservative and only use the
+ * memory that can never be used for microcode. If there are
+ * applications that require more DP ram, we can expand the boundaries
+ * but then we have to be careful of any downloaded microcode.
+ *
+ */
+
+/*
+ * Michael Leslie <mleslie@lineo.com>
+ * adapted Dan Malek's ppc8xx drivers to M68360
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/m68360.h>
+#include <asm/commproc.h>
+
+/* #include <asm/page.h> */
+/* #include <asm/pgtable.h> */
+extern void *_quicc_base;
+extern unsigned int system_clock;
+
+
+static uint dp_alloc_base; /* Starting offset in DP ram */
+static uint dp_alloc_top; /* Max offset + 1 */
+
+#if 0
+static void *host_buffer; /* One page of host buffer */
+static void *host_end; /* end + 1 */
+#endif
+
+/* struct cpm360_t *cpmp; */ /* Pointer to comm processor space */
+
+QUICC *pquicc;
+/* QUICC *quicc_dpram; */ /* mleslie - temporary; use extern pquicc elsewhere instead */
+
+
+/* CPM interrupt vector functions. */
+struct cpm_action {
+ void (*handler)(void *);
+ void *dev_id;
+};
+static struct cpm_action cpm_vecs[CPMVEC_NR];
+static void cpm_interrupt(int irq, void * dev, struct pt_regs * regs);
+static void cpm_error_interrupt(void *);
+
+/* prototypes: */
+void cpm_install_handler(int vec, void (*handler)(), void *dev_id);
+void m360_cpm_reset(void);
+
+
+
+
+void m360_cpm_reset()
+{
+/* pte_t *pte; */
+
+ pquicc = (struct quicc *)(_quicc_base); /* initialized in crt0_rXm.S */
+
+ /* Perform a CPM reset. */
+ pquicc->cp_cr = (SOFTWARE_RESET | CMD_FLAG);
+
+ /* Wait for CPM to become ready (should be 2 clocks). */
+ while (pquicc->cp_cr & CMD_FLAG);
+
+ /* On the recommendation of the 68360 manual, p. 7-60
+ * - Set sdma interrupt service mask to 7
+ * - Set sdma arbitration ID to 4
+ */
+ pquicc->sdma_sdcr = 0x0740;
+
+
+ /* Claim the DP memory for our use.
+ */
+ dp_alloc_base = CPM_DATAONLY_BASE;
+ dp_alloc_top = dp_alloc_base + CPM_DATAONLY_SIZE;
+
+
+ /* Set the host page for allocation.
+ */
+ /* host_buffer = host_page_addr; */
+ /* host_end = host_page_addr + PAGE_SIZE; */
+
+ /* pte = find_pte(&init_mm, host_page_addr); */
+ /* pte_val(*pte) |= _PAGE_NO_CACHE; */
+ /* flush_tlb_page(current->mm->mmap, host_buffer); */
+
+ /* Tell everyone where the comm processor resides.
+ */
+/* cpmp = (cpm360_t *)commproc; */
+}
+
+
+/* This is called during init_IRQ. We used to do it above, but this
+ * was too early since init_IRQ was not yet called.
+ */
+void
+cpm_interrupt_init(void)
+{
+ /* Initialize the CPM interrupt controller.
+ * NOTE THAT pquicc had better have been initialized!
+ * reference: MC68360UM p. 7-377
+ */
+ pquicc->intr_cicr =
+ (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
+ (CPM_INTERRUPT << 13) |
+ CICR_HP_MASK |
+ (CPM_VECTOR_BASE << 5) |
+ CICR_SPS;
+
+ /* mask all CPM interrupts from reaching the cpu32 core: */
+ pquicc->intr_cimr = 0;
+
+
+ /* mles - If I understand correctly, the 360 just pops over to the CPM
+ * specific vector, obviating the necessity to vector through the IRQ
+ * whose priority the CPM is set to. This needs a closer look, though.
+ */
+
+ /* Set our interrupt handler with the core CPU. */
+/* if (request_irq(CPM_INTERRUPT, cpm_interrupt, 0, "cpm", NULL) != 0) */
+/* panic("Could not allocate CPM IRQ!"); */
+
+ /* Install our own error handler.
+ */
+ /* I think we want to hold off on this one for the moment - mles */
+ /* cpm_install_handler(CPMVEC_ERROR, cpm_error_interrupt, NULL); */
+
+ /* master CPM interrupt enable */
+ /* pquicc->intr_cicr |= CICR_IEN; */ /* no such animal for 360 */
+}
+
+
+
+/* CPM interrupt controller interrupt.
+*/
+static void
+cpm_interrupt(int irq, void * dev, struct pt_regs * regs)
+{
+ /* uint vec; */
+
+ /* mles: Note that this stuff is currently being performed by
+ * M68360_do_irq(int vec, struct pt_regs *fp), in ../ints.c */
+
+ /* figure out the vector */
+ /* call that vector's handler */
+ /* clear the irq's bit in the service register */
+
+#if 0 /* old 860 stuff: */
+ /* Get the vector by setting the ACK bit and then reading
+ * the register.
+ */
+ ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr = 1;
+ vec = ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr;
+ vec >>= 11;
+
+
+ if (cpm_vecs[vec].handler != 0)
+ (*cpm_vecs[vec].handler)(cpm_vecs[vec].dev_id);
+ else
+ ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr &= ~(1 << vec);
+
+ /* After servicing the interrupt, we have to remove the status
+ * indicator.
+ */
+ ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cisr |= (1 << vec);
+#endif
+
+}
+
+/* The CPM can generate the error interrupt when there is a race condition
+ * between generating and masking interrupts. All we have to do is ACK it
+ * and return. This is a no-op function so we don't need any special
+ * tests in the interrupt handler.
+ */
+static void
+cpm_error_interrupt(void *dev)
+{
+}
+
+/* Install a CPM interrupt handler.
+*/
+void
+cpm_install_handler(int vec, void (*handler)(), void *dev_id)
+{
+
+ request_irq(vec, handler, 0, "timer", dev_id);
+
+/* if (cpm_vecs[vec].handler != 0) */
+/* printk(KERN_INFO "CPM interrupt %x replacing %x\n", */
+/* (uint)handler, (uint)cpm_vecs[vec].handler); */
+/* cpm_vecs[vec].handler = handler; */
+/* cpm_vecs[vec].dev_id = dev_id; */
+
+ /* ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr |= (1 << vec); */
+/* pquicc->intr_cimr |= (1 << vec); */
+
+}
+
+/* Free a CPM interrupt handler.
+*/
+void
+cpm_free_handler(int vec)
+{
+ cpm_vecs[vec].handler = NULL;
+ cpm_vecs[vec].dev_id = NULL;
+ /* ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr &= ~(1 << vec); */
+ pquicc->intr_cimr &= ~(1 << vec);
+}
+
+
+
+
+/* Allocate some memory from the dual ported ram. We may want to
+ * enforce alignment restrictions, but right now everyone is a good
+ * citizen.
+ */
+uint
+m360_cpm_dpalloc(uint size)
+{
+ uint retloc;
+
+ if ((dp_alloc_base + size) >= dp_alloc_top)
+ return(CPM_DP_NOSPACE);
+
+ retloc = dp_alloc_base;
+ dp_alloc_base += size;
+
+ return(retloc);
+}
+
+
+#if 0 /* mleslie - for now these are simply kmalloc'd */
+/* We also own one page of host buffer space for the allocation of
+ * UART "fifos" and the like.
+ */
+uint
+m360_cpm_hostalloc(uint size)
+{
+ uint retloc;
+
+ if ((host_buffer + size) >= host_end)
+ return(0);
+
+ retloc = host_buffer;
+ host_buffer += size;
+
+ return(retloc);
+}
+#endif
+
+
+/* Set a baud rate generator. This needs lots of work. There are
+ * four BRGs, any of which can be wired to any channel.
+ * The internal baud rate clock is the system clock divided by 16.
+ * This assumes the baudrate is 16x oversampled by the uart.
+ */
+/* #define BRG_INT_CLK (((bd_t *)__res)->bi_intfreq * 1000000) */
+#define BRG_INT_CLK system_clock
+#define BRG_UART_CLK (BRG_INT_CLK/16)
+
+void
+m360_cpm_setbrg(uint brg, uint rate)
+{
+ volatile uint *bp;
+
+ /* This is good enough to get SMCs running.....
+ */
+ /* bp = (uint *)&cpmp->cp_brgc1; */
+ bp = (volatile uint *)(&pquicc->brgc[0].l);
+ bp += brg;
+ *bp = ((BRG_UART_CLK / rate - 1) << 1) | CPM_BRG_EN;
+}
+
+
+/*
+ * Local variables:
+ * c-indent-level: 4
+ * c-basic-offset: 4
+ * tab-width: 4
+ * End:
+ */
diff --git a/arch/m68k/platform/68360/config.c b/arch/m68k/platform/68360/config.c
new file mode 100644
index 000000000000..9dd5bca38749
--- /dev/null
+++ b/arch/m68k/platform/68360/config.c
@@ -0,0 +1,186 @@
+/*
+ * linux/arch/m68knommu/platform/68360/config.c
+ *
+ * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com>
+ * Copyright (C) 1993 Hamish Macdonald
+ * Copyright (C) 1999 D. Jeff Dionne <jeff@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <stdarg.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <asm/setup.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/machdep.h>
+#include <asm/m68360.h>
+
+#ifdef CONFIG_UCQUICC
+#include <asm/bootstd.h>
+#endif
+
+extern void m360_cpm_reset(void);
+
+// Mask to select if the PLL prescaler is enabled.
+#define MCU_PREEN ((unsigned short)(0x0001 << 13))
+
+#if defined(CONFIG_UCQUICC)
+#define OSCILLATOR (unsigned long int)33000000
+#endif
+
+unsigned long int system_clock;
+
+extern QUICC *pquicc;
+
+/* TODO DON"T Hard Code this */
+/* calculate properly using the right PLL and prescaller */
+// unsigned int system_clock = 33000000l;
+extern unsigned long int system_clock; //In kernel setup.c
+
+
+static irqreturn_t hw_tick(int irq, void *dummy)
+{
+ /* Reset Timer1 */
+ /* TSTAT &= 0; */
+
+ pquicc->timer_ter1 = 0x0002; /* clear timer event */
+
+ return arch_timer_interrupt(irq, dummy);
+}
+
+static struct irqaction m68360_timer_irq = {
+ .name = "timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = hw_tick,
+};
+
+void hw_timer_init(void)
+{
+ unsigned char prescaler;
+ unsigned short tgcr_save;
+
+#if 0
+ /* Restart mode, Enable int, 32KHz, Enable timer */
+ TCTL = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN;
+ /* Set prescaler (Divide 32KHz by 32)*/
+ TPRER = 31;
+ /* Set compare register 32Khz / 32 / 10 = 100 */
+ TCMP = 10;
+
+ request_irq(IRQ_MACHSPEC | 1, timer_routine, 0, "timer", NULL);
+#endif
+
+ /* General purpose quicc timers: MC68360UM p7-20 */
+
+ /* Set up timer 1 (in [1..4]) to do 100Hz */
+ tgcr_save = pquicc->timer_tgcr & 0xfff0;
+ pquicc->timer_tgcr = tgcr_save; /* stop and reset timer 1 */
+ /* pquicc->timer_tgcr |= 0x4444; */ /* halt timers when FREEZE (ie bdm freeze) */
+
+ prescaler = 8;
+ pquicc->timer_tmr1 = 0x001a | /* or=1, frr=1, iclk=01b */
+ (unsigned short)((prescaler - 1) << 8);
+
+ pquicc->timer_tcn1 = 0x0000; /* initial count */
+ /* calculate interval for 100Hz based on the _system_clock: */
+ pquicc->timer_trr1 = (system_clock/ prescaler) / HZ; /* reference count */
+
+ pquicc->timer_ter1 = 0x0003; /* clear timer events */
+
+ /* enable timer 1 interrupt in CIMR */
+ setup_irq(CPMVEC_TIMER1, &m68360_timer_irq);
+
+ /* Start timer 1: */
+ tgcr_save = (pquicc->timer_tgcr & 0xfff0) | 0x0001;
+ pquicc->timer_tgcr = tgcr_save;
+}
+
+void BSP_gettod (int *yearp, int *monp, int *dayp,
+ int *hourp, int *minp, int *secp)
+{
+}
+
+int BSP_set_clock_mmss(unsigned long nowtime)
+{
+#if 0
+ short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
+
+ tod->second1 = real_seconds / 10;
+ tod->second2 = real_seconds % 10;
+ tod->minute1 = real_minutes / 10;
+ tod->minute2 = real_minutes % 10;
+#endif
+ return 0;
+}
+
+void BSP_reset (void)
+{
+ local_irq_disable();
+ asm volatile (
+ "moveal #_start, %a0;\n"
+ "moveb #0, 0xFFFFF300;\n"
+ "moveal 0(%a0), %sp;\n"
+ "moveal 4(%a0), %a0;\n"
+ "jmp (%a0);\n"
+ );
+}
+
+unsigned char *scc1_hwaddr;
+static int errno;
+
+#if defined (CONFIG_UCQUICC)
+_bsc0(char *, getserialnum)
+_bsc1(unsigned char *, gethwaddr, int, a)
+_bsc1(char *, getbenv, char *, a)
+#endif
+
+
+void config_BSP(char *command, int len)
+{
+ unsigned char *p;
+
+ m360_cpm_reset();
+
+ /* Calculate the real system clock value. */
+ {
+ unsigned int local_pllcr = (unsigned int)(pquicc->sim_pllcr);
+ if( local_pllcr & MCU_PREEN ) // If the prescaler is dividing by 128
+ {
+ int mf = (int)(pquicc->sim_pllcr & 0x0fff);
+ system_clock = (OSCILLATOR / 128) * (mf + 1);
+ }
+ else
+ {
+ int mf = (int)(pquicc->sim_pllcr & 0x0fff);
+ system_clock = (OSCILLATOR) * (mf + 1);
+ }
+ }
+
+ printk(KERN_INFO "\n68360 QUICC support (C) 2000 Lineo Inc.\n");
+
+#if defined(CONFIG_UCQUICC) && 0
+ printk(KERN_INFO "uCquicc serial string [%s]\n",getserialnum());
+ p = scc1_hwaddr = gethwaddr(0);
+ printk(KERN_INFO "uCquicc hwaddr %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+ p[0], p[1], p[2], p[3], p[4], p[5]);
+
+ p = getbenv("APPEND");
+ if (p)
+ strcpy(p,command);
+ else
+ command[0] = 0;
+#else
+ scc1_hwaddr = "\00\01\02\03\04\05";
+#endif
+
+ mach_gettod = BSP_gettod;
+ mach_reset = BSP_reset;
+}
diff --git a/arch/m68k/platform/68360/entry.S b/arch/m68k/platform/68360/entry.S
new file mode 100644
index 000000000000..46c1b18c9dcb
--- /dev/null
+++ b/arch/m68k/platform/68360/entry.S
@@ -0,0 +1,184 @@
+/*
+ * linux/arch/m68knommu/platform/68360/entry.S
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright (C) 2001 SED Systems, a Division of Calian Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file README.legal in the main directory of this archive
+ * for more details.
+ *
+ * Linux/m68k support by Hamish Macdonald
+ * M68360 Port by SED Systems, and Lineo.
+ */
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/traps.h>
+#include <asm/asm-offsets.h>
+#include <asm/entry.h>
+
+.text
+
+.globl system_call
+.globl resume
+.globl ret_from_exception
+.globl ret_from_signal
+.globl sys_call_table
+.globl ret_from_interrupt
+.globl bad_interrupt
+.globl inthandler
+
+badsys:
+ movel #-ENOSYS,%sp@(PT_OFF_D0)
+ jra ret_from_exception
+
+do_trace:
+ movel #-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/
+ subql #4,%sp
+ SAVE_SWITCH_STACK
+ jbsr syscall_trace_enter
+ RESTORE_SWITCH_STACK
+ addql #4,%sp
+ movel %sp@(PT_OFF_ORIG_D0),%d1
+ movel #-ENOSYS,%d0
+ cmpl #NR_syscalls,%d1
+ jcc 1f
+ lsl #2,%d1
+ lea sys_call_table, %a0
+ jbsr %a0@(%d1)
+
+1: movel %d0,%sp@(PT_OFF_D0) /* save the return value */
+ subql #4,%sp /* dummy return address */
+ SAVE_SWITCH_STACK
+ jbsr syscall_trace_leave
+
+ret_from_signal:
+ RESTORE_SWITCH_STACK
+ addql #4,%sp
+ jra ret_from_exception
+
+ENTRY(system_call)
+ SAVE_ALL
+
+ /* save top of frame*/
+ pea %sp@
+ jbsr set_esp0
+ addql #4,%sp
+
+ movel %sp@(PT_OFF_ORIG_D0),%d0
+
+ movel %sp,%d1 /* get thread_info pointer */
+ andl #-THREAD_SIZE,%d1
+ movel %d1,%a2
+ btst #(TIF_SYSCALL_TRACE%8),%a2@(TI_FLAGS+(31-TIF_SYSCALL_TRACE)/8)
+ jne do_trace
+ cmpl #NR_syscalls,%d0
+ jcc badsys
+ lsl #2,%d0
+ lea sys_call_table,%a0
+ movel %a0@(%d0), %a0
+ jbsr %a0@
+ movel %d0,%sp@(PT_OFF_D0) /* save the return value*/
+
+ret_from_exception:
+ btst #5,%sp@(PT_OFF_SR) /* check if returning to kernel*/
+ jeq Luser_return /* if so, skip resched, signals*/
+
+Lkernel_return:
+ RESTORE_ALL
+
+Luser_return:
+ /* only allow interrupts when we are really the last one on the*/
+ /* kernel stack, otherwise stack overflow can occur during*/
+ /* heavy interrupt load*/
+ andw #ALLOWINT,%sr
+
+ movel %sp,%d1 /* get thread_info pointer */
+ andl #-THREAD_SIZE,%d1
+ movel %d1,%a2
+1:
+ move %a2@(TI_FLAGS),%d1 /* thread_info->flags */
+ jne Lwork_to_do
+ RESTORE_ALL
+
+Lwork_to_do:
+ movel %a2@(TI_FLAGS),%d1 /* thread_info->flags */
+ btst #TIF_NEED_RESCHED,%d1
+ jne reschedule
+
+Lsignal_return:
+ subql #4,%sp /* dummy return address*/
+ SAVE_SWITCH_STACK
+ pea %sp@(SWITCH_STACK_SIZE)
+ bsrw do_signal
+ addql #4,%sp
+ RESTORE_SWITCH_STACK
+ addql #4,%sp
+ jra 1b
+
+/*
+ * This is the main interrupt handler, responsible for calling do_IRQ()
+ */
+inthandler:
+ SAVE_ALL
+ movew %sp@(PT_OFF_FORMATVEC), %d0
+ and.l #0x3ff, %d0
+ lsr.l #0x02, %d0
+
+ movel %sp,%sp@-
+ movel %d0,%sp@- /* put vector # on stack*/
+ jbsr do_IRQ /* process the IRQ*/
+3: addql #8,%sp /* pop parameters off stack*/
+ bra ret_from_interrupt
+
+ret_from_interrupt:
+ jeq 1f
+2:
+ RESTORE_ALL
+1:
+ moveb %sp@(PT_OFF_SR), %d0
+ and #7, %d0
+ jhi 2b
+ /* check if we need to do software interrupts */
+
+ movel irq_stat+CPUSTAT_SOFTIRQ_PENDING,%d0
+ jeq ret_from_exception
+
+ pea ret_from_exception
+ jra do_softirq
+
+
+/*
+ * Handler for uninitialized and spurious interrupts.
+ */
+bad_interrupt:
+ addql #1,num_spurious
+ rte
+
+/*
+ * Beware - when entering resume, prev (the current task) is
+ * in a0, next (the new task) is in a1,so don't change these
+ * registers until their contents are no longer needed.
+ */
+ENTRY(resume)
+ movel %a0,%d1 /* save prev thread in d1 */
+ movew %sr,%a0@(TASK_THREAD+THREAD_SR) /* save sr */
+ movel %usp,%a2 /* save usp */
+ movel %a2,%a0@(TASK_THREAD+THREAD_USP)
+
+ SAVE_SWITCH_STACK
+ movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack */
+ movel %a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new thread stack */
+ RESTORE_SWITCH_STACK
+
+ movel %a1@(TASK_THREAD+THREAD_USP),%a0 /* restore user stack */
+ movel %a0,%usp
+ movew %a1@(TASK_THREAD+THREAD_SR),%sr /* restore thread status reg */
+ rts
+
diff --git a/arch/m68k/platform/68360/head-ram.S b/arch/m68k/platform/68360/head-ram.S
new file mode 100644
index 000000000000..8eb94fb6b971
--- /dev/null
+++ b/arch/m68k/platform/68360/head-ram.S
@@ -0,0 +1,403 @@
+/* arch/m68knommu/platform/68360/head-ram.S
+ *
+ * Startup code for Motorola 68360
+ *
+ * Copyright 2001 (C) SED Systems, a Division of Calian Ltd.
+ * Based on: arch/m68knommu/platform/68328/pilot/crt0_rom.S
+ * Based on: arch/m68knommu/platform/68360/uCquicc/crt0_rom.S, 2.0.38.1.pre7
+ * uClinux Kernel
+ * Copyright (C) Michael Leslie <mleslie@lineo.com>
+ * Based on: arch/m68knommu/platform/68EZ328/ucsimm/crt0_rom.S
+ * Copyright (C) 1998 D. Jeff Dionne <jeff@uclinux.org>,
+ *
+ */
+#define ASSEMBLY
+
+.global _stext
+.global _start
+
+.global _rambase
+.global _ramvec
+.global _ramstart
+.global _ramend
+
+.global _quicc_base
+.global _periph_base
+
+#define RAMEND (CONFIG_RAMBASE + CONFIG_RAMSIZE)
+#define ROMEND (CONFIG_ROMBASE + CONFIG_ROMSIZE)
+
+#define REGB 0x1000
+#define PEPAR (_dprbase + REGB + 0x0016)
+#define GMR (_dprbase + REGB + 0x0040)
+#define OR0 (_dprbase + REGB + 0x0054)
+#define BR0 (_dprbase + REGB + 0x0050)
+#define OR1 (_dprbase + REGB + 0x0064)
+#define BR1 (_dprbase + REGB + 0x0060)
+#define OR4 (_dprbase + REGB + 0x0094)
+#define BR4 (_dprbase + REGB + 0x0090)
+#define OR6 (_dprbase + REGB + 0x00b4)
+#define BR6 (_dprbase + REGB + 0x00b0)
+#define OR7 (_dprbase + REGB + 0x00c4)
+#define BR7 (_dprbase + REGB + 0x00c0)
+
+#define MCR (_dprbase + REGB + 0x0000)
+#define AVR (_dprbase + REGB + 0x0008)
+
+#define SYPCR (_dprbase + REGB + 0x0022)
+
+#define PLLCR (_dprbase + REGB + 0x0010)
+#define CLKOCR (_dprbase + REGB + 0x000C)
+#define CDVCR (_dprbase + REGB + 0x0014)
+
+#define BKAR (_dprbase + REGB + 0x0030)
+#define BKCR (_dprbase + REGB + 0x0034)
+#define SWIV (_dprbase + REGB + 0x0023)
+#define PICR (_dprbase + REGB + 0x0026)
+#define PITR (_dprbase + REGB + 0x002A)
+
+/* Define for all memory configuration */
+#define MCU_SIM_GMR 0x00000000
+#define SIM_OR_MASK 0x0fffffff
+
+/* Defines for chip select zero - the flash */
+#define SIM_OR0_MASK 0x20000002
+#define SIM_BR0_MASK 0x00000001
+
+
+/* Defines for chip select one - the RAM */
+#define SIM_OR1_MASK 0x10000000
+#define SIM_BR1_MASK 0x00000001
+
+#define MCU_SIM_MBAR_ADRS 0x0003ff00
+#define MCU_SIM_MBAR_BA_MASK 0xfffff000
+#define MCU_SIM_MBAR_AS_MASK 0x00000001
+
+#define MCU_SIM_PEPAR 0x00B4
+
+#define MCU_DISABLE_INTRPTS 0x2700
+#define MCU_SIM_AVR 0x00
+
+#define MCU_SIM_MCR 0x00005cff
+
+#define MCU_SIM_CLKOCR 0x00
+#define MCU_SIM_PLLCR 0x8000
+#define MCU_SIM_CDVCR 0x0000
+
+#define MCU_SIM_SYPCR 0x0000
+#define MCU_SIM_SWIV 0x00
+#define MCU_SIM_PICR 0x0000
+#define MCU_SIM_PITR 0x0000
+
+
+#include <asm/m68360_regs.h>
+
+
+/*
+ * By the time this RAM specific code begins to execute, DPRAM
+ * and DRAM should already be mapped and accessible.
+ */
+
+ .text
+_start:
+_stext:
+ nop
+ ori.w #MCU_DISABLE_INTRPTS, %sr /* disable interrupts: */
+ /* We should not need to setup the boot stack the reset should do it. */
+ movea.l #RAMEND, %sp /*set up stack at the end of DRAM:*/
+
+set_mbar_register:
+ moveq.l #0x07, %d1 /* Setup MBAR */
+ movec %d1, %dfc
+
+ lea.l MCU_SIM_MBAR_ADRS, %a0
+ move.l #_dprbase, %d0
+ andi.l #MCU_SIM_MBAR_BA_MASK, %d0
+ ori.l #MCU_SIM_MBAR_AS_MASK, %d0
+ moves.l %d0, %a0@
+
+ moveq.l #0x05, %d1
+ movec.l %d1, %dfc
+
+ /* Now we can begin to access registers in DPRAM */
+
+set_sim_mcr:
+ /* Set Module Configuration Register */
+ move.l #MCU_SIM_MCR, MCR
+
+ /* to do: Determine cause of reset */
+
+ /*
+ * configure system clock MC68360 p. 6-40
+ * (value +1)*osc/128 = system clock
+ */
+set_sim_clock:
+ move.w #MCU_SIM_PLLCR, PLLCR
+ move.b #MCU_SIM_CLKOCR, CLKOCR
+ move.w #MCU_SIM_CDVCR, CDVCR
+
+ /* Wait for the PLL to settle */
+ move.w #16384, %d0
+pll_settle_wait:
+ subi.w #1, %d0
+ bne pll_settle_wait
+
+ /* Setup the system protection register, and watchdog timer register */
+ move.b #MCU_SIM_SWIV, SWIV
+ move.w #MCU_SIM_PICR, PICR
+ move.w #MCU_SIM_PITR, PITR
+ move.w #MCU_SIM_SYPCR, SYPCR
+
+ /* Clear DPRAM - system + parameter */
+ movea.l #_dprbase, %a0
+ movea.l #_dprbase+0x2000, %a1
+
+ /* Copy 0 to %a0 until %a0 == %a1 */
+clear_dpram:
+ movel #0, %a0@+
+ cmpal %a0, %a1
+ bhi clear_dpram
+
+configure_memory_controller:
+ /* Set up Global Memory Register (GMR) */
+ move.l #MCU_SIM_GMR, %d0
+ move.l %d0, GMR
+
+configure_chip_select_0:
+ move.l #RAMEND, %d0
+ subi.l #__ramstart, %d0
+ subq.l #0x01, %d0
+ eori.l #SIM_OR_MASK, %d0
+ ori.l #SIM_OR0_MASK, %d0
+ move.l %d0, OR0
+
+ move.l #__ramstart, %d0
+ ori.l #SIM_BR0_MASK, %d0
+ move.l %d0, BR0
+
+configure_chip_select_1:
+ move.l #ROMEND, %d0
+ subi.l #__rom_start, %d0
+ subq.l #0x01, %d0
+ eori.l #SIM_OR_MASK, %d0
+ ori.l #SIM_OR1_MASK, %d0
+ move.l %d0, OR1
+
+ move.l #__rom_start, %d0
+ ori.l #SIM_BR1_MASK, %d0
+ move.l %d0, BR1
+
+ move.w #MCU_SIM_PEPAR, PEPAR
+
+ /* point to vector table: */
+ move.l #_romvec, %a0
+ move.l #_ramvec, %a1
+copy_vectors:
+ move.l %a0@, %d0
+ move.l %d0, %a1@
+ move.l %a0@, %a1@
+ addq.l #0x04, %a0
+ addq.l #0x04, %a1
+ cmp.l #_start, %a0
+ blt copy_vectors
+
+ move.l #_ramvec, %a1
+ movec %a1, %vbr
+
+
+ /* Copy data segment from ROM to RAM */
+ moveal #_stext, %a0
+ moveal #_sdata, %a1
+ moveal #_edata, %a2
+
+ /* Copy %a0 to %a1 until %a1 == %a2 */
+LD1:
+ move.l %a0@, %d0
+ addq.l #0x04, %a0
+ move.l %d0, %a1@
+ addq.l #0x04, %a1
+ cmp.l #_edata, %a1
+ blt LD1
+
+ moveal #_sbss, %a0
+ moveal #_ebss, %a1
+
+ /* Copy 0 to %a0 until %a0 == %a1 */
+L1:
+ movel #0, %a0@+
+ cmpal %a0, %a1
+ bhi L1
+
+load_quicc:
+ move.l #_dprbase, _quicc_base
+
+store_ram_size:
+ /* Set ram size information */
+ move.l #_sdata, _rambase
+ move.l #_ebss, _ramstart
+ move.l #RAMEND, %d0
+ sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/
+ move.l %d0, _ramend /* Different from RAMEND.*/
+
+ pea 0
+ pea env
+ pea %sp@(4)
+ pea 0
+
+ lea init_thread_union, %a2
+ lea 0x2000(%a2), %sp
+
+lp:
+ jsr start_kernel
+
+_exit:
+ jmp _exit
+
+
+ .data
+ .align 4
+env:
+ .long 0
+_quicc_base:
+ .long 0
+_periph_base:
+ .long 0
+_ramvec:
+ .long 0
+_rambase:
+ .long 0
+_ramstart:
+ .long 0
+_ramend:
+ .long 0
+_dprbase:
+ .long 0xffffe000
+
+ .text
+
+ /*
+ * These are the exception vectors at boot up, they are copied into RAM
+ * and then overwritten as needed.
+ */
+
+.section ".data..initvect","awx"
+ .long RAMEND /* Reset: Initial Stack Pointer - 0. */
+ .long _start /* Reset: Initial Program Counter - 1. */
+ .long buserr /* Bus Error - 2. */
+ .long trap /* Address Error - 3. */
+ .long trap /* Illegal Instruction - 4. */
+ .long trap /* Divide by zero - 5. */
+ .long trap /* CHK, CHK2 Instructions - 6. */
+ .long trap /* TRAPcc, TRAPV Instructions - 7. */
+ .long trap /* Privilege Violation - 8. */
+ .long trap /* Trace - 9. */
+ .long trap /* Line 1010 Emulator - 10. */
+ .long trap /* Line 1111 Emualtor - 11. */
+ .long trap /* Harware Breakpoint - 12. */
+ .long trap /* (Reserved for Coprocessor Protocol Violation)- 13. */
+ .long trap /* Format Error - 14. */
+ .long trap /* Uninitialized Interrupt - 15. */
+ .long trap /* (Unassigned, Reserver) - 16. */
+ .long trap /* (Unassigned, Reserver) - 17. */
+ .long trap /* (Unassigned, Reserver) - 18. */
+ .long trap /* (Unassigned, Reserver) - 19. */
+ .long trap /* (Unassigned, Reserver) - 20. */
+ .long trap /* (Unassigned, Reserver) - 21. */
+ .long trap /* (Unassigned, Reserver) - 22. */
+ .long trap /* (Unassigned, Reserver) - 23. */
+ .long trap /* Spurious Interrupt - 24. */
+ .long trap /* Level 1 Interrupt Autovector - 25. */
+ .long trap /* Level 2 Interrupt Autovector - 26. */
+ .long trap /* Level 3 Interrupt Autovector - 27. */
+ .long trap /* Level 4 Interrupt Autovector - 28. */
+ .long trap /* Level 5 Interrupt Autovector - 29. */
+ .long trap /* Level 6 Interrupt Autovector - 30. */
+ .long trap /* Level 7 Interrupt Autovector - 31. */
+ .long system_call /* Trap Instruction Vectors 0 - 32. */
+ .long trap /* Trap Instruction Vectors 1 - 33. */
+ .long trap /* Trap Instruction Vectors 2 - 34. */
+ .long trap /* Trap Instruction Vectors 3 - 35. */
+ .long trap /* Trap Instruction Vectors 4 - 36. */
+ .long trap /* Trap Instruction Vectors 5 - 37. */
+ .long trap /* Trap Instruction Vectors 6 - 38. */
+ .long trap /* Trap Instruction Vectors 7 - 39. */
+ .long trap /* Trap Instruction Vectors 8 - 40. */
+ .long trap /* Trap Instruction Vectors 9 - 41. */
+ .long trap /* Trap Instruction Vectors 10 - 42. */
+ .long trap /* Trap Instruction Vectors 11 - 43. */
+ .long trap /* Trap Instruction Vectors 12 - 44. */
+ .long trap /* Trap Instruction Vectors 13 - 45. */
+ .long trap /* Trap Instruction Vectors 14 - 46. */
+ .long trap /* Trap Instruction Vectors 15 - 47. */
+ .long 0 /* (Reserved for Coprocessor) - 48. */
+ .long 0 /* (Reserved for Coprocessor) - 49. */
+ .long 0 /* (Reserved for Coprocessor) - 50. */
+ .long 0 /* (Reserved for Coprocessor) - 51. */
+ .long 0 /* (Reserved for Coprocessor) - 52. */
+ .long 0 /* (Reserved for Coprocessor) - 53. */
+ .long 0 /* (Reserved for Coprocessor) - 54. */
+ .long 0 /* (Reserved for Coprocessor) - 55. */
+ .long 0 /* (Reserved for Coprocessor) - 56. */
+ .long 0 /* (Reserved for Coprocessor) - 57. */
+ .long 0 /* (Reserved for Coprocessor) - 58. */
+ .long 0 /* (Unassigned, Reserved) - 59. */
+ .long 0 /* (Unassigned, Reserved) - 60. */
+ .long 0 /* (Unassigned, Reserved) - 61. */
+ .long 0 /* (Unassigned, Reserved) - 62. */
+ .long 0 /* (Unassigned, Reserved) - 63. */
+ /* The assignment of these vectors to the CPM is */
+ /* dependent on the configuration of the CPM vba */
+ /* fields. */
+ .long 0 /* (User-Defined Vectors 1) CPM Error - 64. */
+ .long 0 /* (User-Defined Vectors 2) CPM Parallel IO PC11- 65. */
+ .long 0 /* (User-Defined Vectors 3) CPM Parallel IO PC10- 66. */
+ .long 0 /* (User-Defined Vectors 4) CPM SMC2 / PIP - 67. */
+ .long 0 /* (User-Defined Vectors 5) CPM SMC1 - 68. */
+ .long 0 /* (User-Defined Vectors 6) CPM SPI - 69. */
+ .long 0 /* (User-Defined Vectors 7) CPM Parallel IO PC9 - 70. */
+ .long 0 /* (User-Defined Vectors 8) CPM Timer 4 - 71. */
+ .long 0 /* (User-Defined Vectors 9) CPM Reserved - 72. */
+ .long 0 /* (User-Defined Vectors 10) CPM Parallel IO PC8- 73. */
+ .long 0 /* (User-Defined Vectors 11) CPM Parallel IO PC7- 74. */
+ .long 0 /* (User-Defined Vectors 12) CPM Parallel IO PC6- 75. */
+ .long 0 /* (User-Defined Vectors 13) CPM Timer 3 - 76. */
+ .long 0 /* (User-Defined Vectors 14) CPM Reserved - 77. */
+ .long 0 /* (User-Defined Vectors 15) CPM Parallel IO PC5- 78. */
+ .long 0 /* (User-Defined Vectors 16) CPM Parallel IO PC4- 79. */
+ .long 0 /* (User-Defined Vectors 17) CPM Reserved - 80. */
+ .long 0 /* (User-Defined Vectors 18) CPM RISC Timer Tbl - 81. */
+ .long 0 /* (User-Defined Vectors 19) CPM Timer 2 - 82. */
+ .long 0 /* (User-Defined Vectors 21) CPM Reserved - 83. */
+ .long 0 /* (User-Defined Vectors 22) CPM IDMA2 - 84. */
+ .long 0 /* (User-Defined Vectors 23) CPM IDMA1 - 85. */
+ .long 0 /* (User-Defined Vectors 24) CPM SDMA Bus Err - 86. */
+ .long 0 /* (User-Defined Vectors 25) CPM Parallel IO PC3- 87. */
+ .long 0 /* (User-Defined Vectors 26) CPM Parallel IO PC2- 88. */
+ .long 0 /* (User-Defined Vectors 27) CPM Timer 1 - 89. */
+ .long 0 /* (User-Defined Vectors 28) CPM Parallel IO PC1- 90. */
+ .long 0 /* (User-Defined Vectors 29) CPM SCC 4 - 91. */
+ .long 0 /* (User-Defined Vectors 30) CPM SCC 3 - 92. */
+ .long 0 /* (User-Defined Vectors 31) CPM SCC 2 - 93. */
+ .long 0 /* (User-Defined Vectors 32) CPM SCC 1 - 94. */
+ .long 0 /* (User-Defined Vectors 33) CPM Parallel IO PC0- 95. */
+ /* I don't think anything uses the vectors after here. */
+ .long 0 /* (User-Defined Vectors 34) - 96. */
+ .long 0,0,0,0,0 /* (User-Defined Vectors 35 - 39). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 40 - 49). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 50 - 59). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 60 - 69). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 70 - 79). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 80 - 89). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 90 - 99). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 100 - 109). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 110 - 119). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 120 - 129). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 130 - 139). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 140 - 149). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 150 - 159). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 160 - 169). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 170 - 179). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 180 - 189). */
+ .long 0,0,0 /* (User-Defined Vectors 190 - 192). */
+.text
+ignore: rte
diff --git a/arch/m68k/platform/68360/head-rom.S b/arch/m68k/platform/68360/head-rom.S
new file mode 100644
index 000000000000..97510e55b802
--- /dev/null
+++ b/arch/m68k/platform/68360/head-rom.S
@@ -0,0 +1,414 @@
+/* arch/m68knommu/platform/68360/head-rom.S
+ *
+ * Startup code for Motorola 68360
+ *
+ * Copyright (C) SED Systems, a Division of Calian Ltd.
+ * Based on: arch/m68knommu/platform/68328/pilot/crt0_rom.S
+ * Based on: arch/m68knommu/platform/68360/uCquicc/crt0_rom.S, 2.0.38.1.pre7
+ * uClinux Kernel
+ * Copyright (C) Michael Leslie <mleslie@lineo.com>
+ * Based on: arch/m68knommu/platform/68EZ328/ucsimm/crt0_rom.S
+ * Copyright (C) 1998 D. Jeff Dionne <jeff@uclinux.org>,
+ *
+ */
+
+.global _stext
+.global _sbss
+.global _start
+
+.global _rambase
+.global _ramvec
+.global _ramstart
+.global _ramend
+
+.global _quicc_base
+.global _periph_base
+
+#define RAMEND (CONFIG_RAMBASE + CONFIG_RAMSIZE)
+
+#define REGB 0x1000
+#define PEPAR (_dprbase + REGB + 0x0016)
+#define GMR (_dprbase + REGB + 0x0040)
+#define OR0 (_dprbase + REGB + 0x0054)
+#define BR0 (_dprbase + REGB + 0x0050)
+
+#define OR1 (_dprbase + REGB + 0x0064)
+#define BR1 (_dprbase + REGB + 0x0060)
+
+#define OR2 (_dprbase + REGB + 0x0074)
+#define BR2 (_dprbase + REGB + 0x0070)
+
+#define OR3 (_dprbase + REGB + 0x0084)
+#define BR3 (_dprbase + REGB + 0x0080)
+
+#define OR4 (_dprbase + REGB + 0x0094)
+#define BR4 (_dprbase + REGB + 0x0090)
+
+#define OR5 (_dprbase + REGB + 0x00A4)
+#define BR5 (_dprbase + REGB + 0x00A0)
+
+#define OR6 (_dprbase + REGB + 0x00b4)
+#define BR6 (_dprbase + REGB + 0x00b0)
+
+#define OR7 (_dprbase + REGB + 0x00c4)
+#define BR7 (_dprbase + REGB + 0x00c0)
+
+#define MCR (_dprbase + REGB + 0x0000)
+#define AVR (_dprbase + REGB + 0x0008)
+
+#define SYPCR (_dprbase + REGB + 0x0022)
+
+#define PLLCR (_dprbase + REGB + 0x0010)
+#define CLKOCR (_dprbase + REGB + 0x000C)
+#define CDVCR (_dprbase + REGB + 0x0014)
+
+#define BKAR (_dprbase + REGB + 0x0030)
+#define BKCR (_dprbase + REGB + 0x0034)
+#define SWIV (_dprbase + REGB + 0x0023)
+#define PICR (_dprbase + REGB + 0x0026)
+#define PITR (_dprbase + REGB + 0x002A)
+
+/* Define for all memory configuration */
+#define MCU_SIM_GMR 0x00000000
+#define SIM_OR_MASK 0x0fffffff
+
+/* Defines for chip select zero - the flash */
+#define SIM_OR0_MASK 0x20000000
+#define SIM_BR0_MASK 0x00000001
+
+/* Defines for chip select one - the RAM */
+#define SIM_OR1_MASK 0x10000000
+#define SIM_BR1_MASK 0x00000001
+
+#define MCU_SIM_MBAR_ADRS 0x0003ff00
+#define MCU_SIM_MBAR_BA_MASK 0xfffff000
+#define MCU_SIM_MBAR_AS_MASK 0x00000001
+
+#define MCU_SIM_PEPAR 0x00B4
+
+#define MCU_DISABLE_INTRPTS 0x2700
+#define MCU_SIM_AVR 0x00
+
+#define MCU_SIM_MCR 0x00005cff
+
+#define MCU_SIM_CLKOCR 0x00
+#define MCU_SIM_PLLCR 0x8000
+#define MCU_SIM_CDVCR 0x0000
+
+#define MCU_SIM_SYPCR 0x0000
+#define MCU_SIM_SWIV 0x00
+#define MCU_SIM_PICR 0x0000
+#define MCU_SIM_PITR 0x0000
+
+
+#include <asm/m68360_regs.h>
+
+
+/*
+ * By the time this RAM specific code begins to execute, DPRAM
+ * and DRAM should already be mapped and accessible.
+ */
+
+ .text
+_start:
+_stext:
+ nop
+ ori.w #MCU_DISABLE_INTRPTS, %sr /* disable interrupts: */
+ /* We should not need to setup the boot stack the reset should do it. */
+ movea.l #RAMEND, %sp /* set up stack at the end of DRAM:*/
+
+
+set_mbar_register:
+ moveq.l #0x07, %d1 /* Setup MBAR */
+ movec %d1, %dfc
+
+ lea.l MCU_SIM_MBAR_ADRS, %a0
+ move.l #_dprbase, %d0
+ andi.l #MCU_SIM_MBAR_BA_MASK, %d0
+ ori.l #MCU_SIM_MBAR_AS_MASK, %d0
+ moves.l %d0, %a0@
+
+ moveq.l #0x05, %d1
+ movec.l %d1, %dfc
+
+ /* Now we can begin to access registers in DPRAM */
+
+set_sim_mcr:
+ /* Set Module Configuration Register */
+ move.l #MCU_SIM_MCR, MCR
+
+ /* to do: Determine cause of reset */
+
+ /*
+ * configure system clock MC68360 p. 6-40
+ * (value +1)*osc/128 = system clock
+ * or
+ * (value + 1)*osc = system clock
+ * You do not need to divide the oscillator by 128 unless you want to.
+ */
+set_sim_clock:
+ move.w #MCU_SIM_PLLCR, PLLCR
+ move.b #MCU_SIM_CLKOCR, CLKOCR
+ move.w #MCU_SIM_CDVCR, CDVCR
+
+ /* Wait for the PLL to settle */
+ move.w #16384, %d0
+pll_settle_wait:
+ subi.w #1, %d0
+ bne pll_settle_wait
+
+ /* Setup the system protection register, and watchdog timer register */
+ move.b #MCU_SIM_SWIV, SWIV
+ move.w #MCU_SIM_PICR, PICR
+ move.w #MCU_SIM_PITR, PITR
+ move.w #MCU_SIM_SYPCR, SYPCR
+
+ /* Clear DPRAM - system + parameter */
+ movea.l #_dprbase, %a0
+ movea.l #_dprbase+0x2000, %a1
+
+ /* Copy 0 to %a0 until %a0 == %a1 */
+clear_dpram:
+ movel #0, %a0@+
+ cmpal %a0, %a1
+ bhi clear_dpram
+
+configure_memory_controller:
+ /* Set up Global Memory Register (GMR) */
+ move.l #MCU_SIM_GMR, %d0
+ move.l %d0, GMR
+
+configure_chip_select_0:
+ move.l #0x00400000, %d0
+ subq.l #0x01, %d0
+ eori.l #SIM_OR_MASK, %d0
+ ori.l #SIM_OR0_MASK, %d0
+ move.l %d0, OR0
+
+ move.l #__rom_start, %d0
+ ori.l #SIM_BR0_MASK, %d0
+ move.l %d0, BR0
+
+ move.l #0x0, BR1
+ move.l #0x0, BR2
+ move.l #0x0, BR3
+ move.l #0x0, BR4
+ move.l #0x0, BR5
+ move.l #0x0, BR6
+ move.l #0x0, BR7
+
+ move.w #MCU_SIM_PEPAR, PEPAR
+
+ /* point to vector table: */
+ move.l #_romvec, %a0
+ move.l #_ramvec, %a1
+copy_vectors:
+ move.l %a0@, %d0
+ move.l %d0, %a1@
+ move.l %a0@, %a1@
+ addq.l #0x04, %a0
+ addq.l #0x04, %a1
+ cmp.l #_start, %a0
+ blt copy_vectors
+
+ move.l #_ramvec, %a1
+ movec %a1, %vbr
+
+
+ /* Copy data segment from ROM to RAM */
+ moveal #_etext, %a0
+ moveal #_sdata, %a1
+ moveal #_edata, %a2
+
+ /* Copy %a0 to %a1 until %a1 == %a2 */
+LD1:
+ move.l %a0@, %d0
+ addq.l #0x04, %a0
+ move.l %d0, %a1@
+ addq.l #0x04, %a1
+ cmp.l #_edata, %a1
+ blt LD1
+
+ moveal #_sbss, %a0
+ moveal #_ebss, %a1
+
+ /* Copy 0 to %a0 until %a0 == %a1 */
+L1:
+ movel #0, %a0@+
+ cmpal %a0, %a1
+ bhi L1
+
+load_quicc:
+ move.l #_dprbase, _quicc_base
+
+store_ram_size:
+ /* Set ram size information */
+ move.l #_sdata, _rambase
+ move.l #_ebss, _ramstart
+ move.l #RAMEND, %d0
+ sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/
+ move.l %d0, _ramend /* Different from RAMEND.*/
+
+ pea 0
+ pea env
+ pea %sp@(4)
+ pea 0
+
+ lea init_thread_union, %a2
+ lea 0x2000(%a2), %sp
+
+lp:
+ jsr start_kernel
+
+_exit:
+ jmp _exit
+
+
+ .data
+ .align 4
+env:
+ .long 0
+_quicc_base:
+ .long 0
+_periph_base:
+ .long 0
+_ramvec:
+ .long 0
+_rambase:
+ .long 0
+_ramstart:
+ .long 0
+_ramend:
+ .long 0
+_dprbase:
+ .long 0xffffe000
+
+
+ .text
+
+ /*
+ * These are the exception vectors at boot up, they are copied into RAM
+ * and then overwritten as needed.
+ */
+
+.section ".data..initvect","awx"
+ .long RAMEND /* Reset: Initial Stack Pointer - 0. */
+ .long _start /* Reset: Initial Program Counter - 1. */
+ .long buserr /* Bus Error - 2. */
+ .long trap /* Address Error - 3. */
+ .long trap /* Illegal Instruction - 4. */
+ .long trap /* Divide by zero - 5. */
+ .long trap /* CHK, CHK2 Instructions - 6. */
+ .long trap /* TRAPcc, TRAPV Instructions - 7. */
+ .long trap /* Privilege Violation - 8. */
+ .long trap /* Trace - 9. */
+ .long trap /* Line 1010 Emulator - 10. */
+ .long trap /* Line 1111 Emualtor - 11. */
+ .long trap /* Harware Breakpoint - 12. */
+ .long trap /* (Reserved for Coprocessor Protocol Violation)- 13. */
+ .long trap /* Format Error - 14. */
+ .long trap /* Uninitialized Interrupt - 15. */
+ .long trap /* (Unassigned, Reserver) - 16. */
+ .long trap /* (Unassigned, Reserver) - 17. */
+ .long trap /* (Unassigned, Reserver) - 18. */
+ .long trap /* (Unassigned, Reserver) - 19. */
+ .long trap /* (Unassigned, Reserver) - 20. */
+ .long trap /* (Unassigned, Reserver) - 21. */
+ .long trap /* (Unassigned, Reserver) - 22. */
+ .long trap /* (Unassigned, Reserver) - 23. */
+ .long trap /* Spurious Interrupt - 24. */
+ .long trap /* Level 1 Interrupt Autovector - 25. */
+ .long trap /* Level 2 Interrupt Autovector - 26. */
+ .long trap /* Level 3 Interrupt Autovector - 27. */
+ .long trap /* Level 4 Interrupt Autovector - 28. */
+ .long trap /* Level 5 Interrupt Autovector - 29. */
+ .long trap /* Level 6 Interrupt Autovector - 30. */
+ .long trap /* Level 7 Interrupt Autovector - 31. */
+ .long system_call /* Trap Instruction Vectors 0 - 32. */
+ .long trap /* Trap Instruction Vectors 1 - 33. */
+ .long trap /* Trap Instruction Vectors 2 - 34. */
+ .long trap /* Trap Instruction Vectors 3 - 35. */
+ .long trap /* Trap Instruction Vectors 4 - 36. */
+ .long trap /* Trap Instruction Vectors 5 - 37. */
+ .long trap /* Trap Instruction Vectors 6 - 38. */
+ .long trap /* Trap Instruction Vectors 7 - 39. */
+ .long trap /* Trap Instruction Vectors 8 - 40. */
+ .long trap /* Trap Instruction Vectors 9 - 41. */
+ .long trap /* Trap Instruction Vectors 10 - 42. */
+ .long trap /* Trap Instruction Vectors 11 - 43. */
+ .long trap /* Trap Instruction Vectors 12 - 44. */
+ .long trap /* Trap Instruction Vectors 13 - 45. */
+ .long trap /* Trap Instruction Vectors 14 - 46. */
+ .long trap /* Trap Instruction Vectors 15 - 47. */
+ .long 0 /* (Reserved for Coprocessor) - 48. */
+ .long 0 /* (Reserved for Coprocessor) - 49. */
+ .long 0 /* (Reserved for Coprocessor) - 50. */
+ .long 0 /* (Reserved for Coprocessor) - 51. */
+ .long 0 /* (Reserved for Coprocessor) - 52. */
+ .long 0 /* (Reserved for Coprocessor) - 53. */
+ .long 0 /* (Reserved for Coprocessor) - 54. */
+ .long 0 /* (Reserved for Coprocessor) - 55. */
+ .long 0 /* (Reserved for Coprocessor) - 56. */
+ .long 0 /* (Reserved for Coprocessor) - 57. */
+ .long 0 /* (Reserved for Coprocessor) - 58. */
+ .long 0 /* (Unassigned, Reserved) - 59. */
+ .long 0 /* (Unassigned, Reserved) - 60. */
+ .long 0 /* (Unassigned, Reserved) - 61. */
+ .long 0 /* (Unassigned, Reserved) - 62. */
+ .long 0 /* (Unassigned, Reserved) - 63. */
+ /* The assignment of these vectors to the CPM is */
+ /* dependent on the configuration of the CPM vba */
+ /* fields. */
+ .long 0 /* (User-Defined Vectors 1) CPM Error - 64. */
+ .long 0 /* (User-Defined Vectors 2) CPM Parallel IO PC11- 65. */
+ .long 0 /* (User-Defined Vectors 3) CPM Parallel IO PC10- 66. */
+ .long 0 /* (User-Defined Vectors 4) CPM SMC2 / PIP - 67. */
+ .long 0 /* (User-Defined Vectors 5) CPM SMC1 - 68. */
+ .long 0 /* (User-Defined Vectors 6) CPM SPI - 69. */
+ .long 0 /* (User-Defined Vectors 7) CPM Parallel IO PC9 - 70. */
+ .long 0 /* (User-Defined Vectors 8) CPM Timer 4 - 71. */
+ .long 0 /* (User-Defined Vectors 9) CPM Reserved - 72. */
+ .long 0 /* (User-Defined Vectors 10) CPM Parallel IO PC8- 73. */
+ .long 0 /* (User-Defined Vectors 11) CPM Parallel IO PC7- 74. */
+ .long 0 /* (User-Defined Vectors 12) CPM Parallel IO PC6- 75. */
+ .long 0 /* (User-Defined Vectors 13) CPM Timer 3 - 76. */
+ .long 0 /* (User-Defined Vectors 14) CPM Reserved - 77. */
+ .long 0 /* (User-Defined Vectors 15) CPM Parallel IO PC5- 78. */
+ .long 0 /* (User-Defined Vectors 16) CPM Parallel IO PC4- 79. */
+ .long 0 /* (User-Defined Vectors 17) CPM Reserved - 80. */
+ .long 0 /* (User-Defined Vectors 18) CPM RISC Timer Tbl - 81. */
+ .long 0 /* (User-Defined Vectors 19) CPM Timer 2 - 82. */
+ .long 0 /* (User-Defined Vectors 21) CPM Reserved - 83. */
+ .long 0 /* (User-Defined Vectors 22) CPM IDMA2 - 84. */
+ .long 0 /* (User-Defined Vectors 23) CPM IDMA1 - 85. */
+ .long 0 /* (User-Defined Vectors 24) CPM SDMA Bus Err - 86. */
+ .long 0 /* (User-Defined Vectors 25) CPM Parallel IO PC3- 87. */
+ .long 0 /* (User-Defined Vectors 26) CPM Parallel IO PC2- 88. */
+ .long 0 /* (User-Defined Vectors 27) CPM Timer 1 - 89. */
+ .long 0 /* (User-Defined Vectors 28) CPM Parallel IO PC1- 90. */
+ .long 0 /* (User-Defined Vectors 29) CPM SCC 4 - 91. */
+ .long 0 /* (User-Defined Vectors 30) CPM SCC 3 - 92. */
+ .long 0 /* (User-Defined Vectors 31) CPM SCC 2 - 93. */
+ .long 0 /* (User-Defined Vectors 32) CPM SCC 1 - 94. */
+ .long 0 /* (User-Defined Vectors 33) CPM Parallel IO PC0- 95. */
+ /* I don't think anything uses the vectors after here. */
+ .long 0 /* (User-Defined Vectors 34) - 96. */
+ .long 0,0,0,0,0 /* (User-Defined Vectors 35 - 39). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 40 - 49). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 50 - 59). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 60 - 69). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 70 - 79). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 80 - 89). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 90 - 99). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 100 - 109). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 110 - 119). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 120 - 129). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 130 - 139). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 140 - 149). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 150 - 159). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 160 - 169). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 170 - 179). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 180 - 189). */
+ .long 0,0,0 /* (User-Defined Vectors 190 - 192). */
+.text
+ignore: rte
diff --git a/arch/m68k/platform/68360/ints.c b/arch/m68k/platform/68360/ints.c
new file mode 100644
index 000000000000..4af0f4e30f74
--- /dev/null
+++ b/arch/m68k/platform/68360/ints.c
@@ -0,0 +1,139 @@
+/*
+ * linux/arch/$(ARCH)/platform/$(PLATFORM)/ints.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com>
+ * Copyright (c) 1996 Roman Zippel
+ * Copyright (c) 1999 D. Jeff Dionne <jeff@uclinux.org>
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/m68360.h>
+
+/* from quicc/commproc.c: */
+extern QUICC *pquicc;
+extern void cpm_interrupt_init(void);
+
+#define INTERNAL_IRQS (96)
+
+/* assembler routines */
+asmlinkage void system_call(void);
+asmlinkage void buserr(void);
+asmlinkage void trap(void);
+asmlinkage void bad_interrupt(void);
+asmlinkage void inthandler(void);
+
+extern void *_ramvec[];
+
+/* The number of spurious interrupts */
+volatile unsigned int num_spurious;
+
+static void intc_irq_unmask(struct irq_data *d)
+{
+ pquicc->intr_cimr |= (1 << d->irq);
+}
+
+static void intc_irq_mask(struct irq_data *d)
+{
+ pquicc->intr_cimr &= ~(1 << d->irq);
+}
+
+static void intc_irq_ack(struct irq_data *d)
+{
+ pquicc->intr_cisr = (1 << d->irq);
+}
+
+static struct irq_chip intc_irq_chip = {
+ .name = "M68K-INTC",
+ .irq_mask = intc_irq_mask,
+ .irq_unmask = intc_irq_unmask,
+ .irq_ack = intc_irq_ack,
+};
+
+/*
+ * This function should be called during kernel startup to initialize
+ * the vector table.
+ */
+void init_IRQ(void)
+{
+ int i;
+ int vba = (CPM_VECTOR_BASE<<4);
+
+ /* set up the vectors */
+ _ramvec[2] = buserr;
+ _ramvec[3] = trap;
+ _ramvec[4] = trap;
+ _ramvec[5] = trap;
+ _ramvec[6] = trap;
+ _ramvec[7] = trap;
+ _ramvec[8] = trap;
+ _ramvec[9] = trap;
+ _ramvec[10] = trap;
+ _ramvec[11] = trap;
+ _ramvec[12] = trap;
+ _ramvec[13] = trap;
+ _ramvec[14] = trap;
+ _ramvec[15] = trap;
+
+ _ramvec[32] = system_call;
+ _ramvec[33] = trap;
+
+ cpm_interrupt_init();
+
+ /* set up CICR for vector base address and irq level */
+ /* irl = 4, hp = 1f - see MC68360UM p 7-377 */
+ pquicc->intr_cicr = 0x00e49f00 | vba;
+
+ /* CPM interrupt vectors: (p 7-376) */
+ _ramvec[vba+CPMVEC_ERROR] = bad_interrupt; /* Error */
+ _ramvec[vba+CPMVEC_PIO_PC11] = inthandler; /* pio - pc11 */
+ _ramvec[vba+CPMVEC_PIO_PC10] = inthandler; /* pio - pc10 */
+ _ramvec[vba+CPMVEC_SMC2] = inthandler; /* smc2/pip */
+ _ramvec[vba+CPMVEC_SMC1] = inthandler; /* smc1 */
+ _ramvec[vba+CPMVEC_SPI] = inthandler; /* spi */
+ _ramvec[vba+CPMVEC_PIO_PC9] = inthandler; /* pio - pc9 */
+ _ramvec[vba+CPMVEC_TIMER4] = inthandler; /* timer 4 */
+ _ramvec[vba+CPMVEC_RESERVED1] = inthandler; /* reserved */
+ _ramvec[vba+CPMVEC_PIO_PC8] = inthandler; /* pio - pc8 */
+ _ramvec[vba+CPMVEC_PIO_PC7] = inthandler; /* pio - pc7 */
+ _ramvec[vba+CPMVEC_PIO_PC6] = inthandler; /* pio - pc6 */
+ _ramvec[vba+CPMVEC_TIMER3] = inthandler; /* timer 3 */
+ _ramvec[vba+CPMVEC_PIO_PC5] = inthandler; /* pio - pc5 */
+ _ramvec[vba+CPMVEC_PIO_PC4] = inthandler; /* pio - pc4 */
+ _ramvec[vba+CPMVEC_RESERVED2] = inthandler; /* reserved */
+ _ramvec[vba+CPMVEC_RISCTIMER] = inthandler; /* timer table */
+ _ramvec[vba+CPMVEC_TIMER2] = inthandler; /* timer 2 */
+ _ramvec[vba+CPMVEC_RESERVED3] = inthandler; /* reserved */
+ _ramvec[vba+CPMVEC_IDMA2] = inthandler; /* idma 2 */
+ _ramvec[vba+CPMVEC_IDMA1] = inthandler; /* idma 1 */
+ _ramvec[vba+CPMVEC_SDMA_CB_ERR] = inthandler; /* sdma channel bus error */
+ _ramvec[vba+CPMVEC_PIO_PC3] = inthandler; /* pio - pc3 */
+ _ramvec[vba+CPMVEC_PIO_PC2] = inthandler; /* pio - pc2 */
+ /* _ramvec[vba+CPMVEC_TIMER1] = cpm_isr_timer1; */ /* timer 1 */
+ _ramvec[vba+CPMVEC_TIMER1] = inthandler; /* timer 1 */
+ _ramvec[vba+CPMVEC_PIO_PC1] = inthandler; /* pio - pc1 */
+ _ramvec[vba+CPMVEC_SCC4] = inthandler; /* scc 4 */
+ _ramvec[vba+CPMVEC_SCC3] = inthandler; /* scc 3 */
+ _ramvec[vba+CPMVEC_SCC2] = inthandler; /* scc 2 */
+ _ramvec[vba+CPMVEC_SCC1] = inthandler; /* scc 1 */
+ _ramvec[vba+CPMVEC_PIO_PC0] = inthandler; /* pio - pc0 */
+
+
+ /* turn off all CPM interrupts */
+ pquicc->intr_cimr = 0x00000000;
+
+ for (i = 0; (i < NR_IRQS); i++) {
+ irq_set_chip(i, &intc_irq_chip);
+ irq_set_handler(i, handle_level_irq);
+ }
+}
+