diff options
Diffstat (limited to 'arch/mips/alchemy')
-rw-r--r-- | arch/mips/alchemy/Kconfig | 1 | ||||
-rw-r--r-- | arch/mips/alchemy/common/platform.c | 10 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/db1000.c | 11 |
3 files changed, 19 insertions, 3 deletions
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig index 69734120ada1..6ca81e1bd35c 100644 --- a/arch/mips/alchemy/Kconfig +++ b/arch/mips/alchemy/Kconfig @@ -14,6 +14,7 @@ config MIPS_DB1XXX bool "Alchemy DB1XXX / PB1XXX boards" select GPIOLIB select HAVE_PCI + select HAVE_PATA_PLATFORM select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK help diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index b8f3397c59c9..d4ab34b3b404 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -51,9 +51,9 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state, #define PORT(_base, _irq) \ { \ .mapbase = _base, \ + .mapsize = 0x1000, \ .irq = _irq, \ .regshift = 2, \ - .iotype = UPIO_AU, \ .flags = UPF_SKIP_TEST | UPF_IOREMAP | \ UPF_FIXED_TYPE, \ .type = PORT_16550A, \ @@ -124,8 +124,14 @@ static void __init alchemy_setup_uarts(int ctype) au1xx0_uart_device.dev.platform_data = ports; /* Fill up uartclk. */ - for (s = 0; s < c; s++) + for (s = 0; s < c; s++) { ports[s].uartclk = uartclk; + if (au_platform_setup(&ports[s]) < 0) { + kfree(ports); + printk(KERN_INFO "Alchemy: missing support for UARTs\n"); + return; + } + } if (platform_device_register(&au1xx0_uart_device)) printk(KERN_INFO "Alchemy: failed to register UARTs\n"); } diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c index 2c52ee27b4f2..79d66faa8482 100644 --- a/arch/mips/alchemy/devboards/db1000.c +++ b/arch/mips/alchemy/devboards/db1000.c @@ -381,13 +381,21 @@ static struct platform_device db1100_mmc1_dev = { static struct ads7846_platform_data db1100_touch_pd = { .model = 7846, .vref_mv = 3300, - .gpio_pendown = 21, }; static struct spi_gpio_platform_data db1100_spictl_pd = { .num_chipselect = 1, }; +static struct gpiod_lookup_table db1100_touch_gpio_table = { + .dev_id = "spi0.0", + .table = { + GPIO_LOOKUP("alchemy-gpio2", 21, + "pendown", GPIO_ACTIVE_LOW), + { } + }, +}; + static struct spi_board_info db1100_spi_info[] __initdata = { [0] = { .modalias = "ads7846", @@ -474,6 +482,7 @@ int __init db1000_dev_setup(void) pfc |= (1 << 0); /* SSI0 pins as GPIOs */ alchemy_wrsys(pfc, AU1000_SYS_PINFUNC); + gpiod_add_lookup_table(&db1100_touch_gpio_table); spi_register_board_info(db1100_spi_info, ARRAY_SIZE(db1100_spi_info)); |