summaryrefslogtreecommitdiff
path: root/arch/powerpc/boot/dts/currituck.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/boot/dts/currituck.dts')
-rw-r--r--arch/powerpc/boot/dts/currituck.dts237
1 files changed, 237 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/currituck.dts b/arch/powerpc/boot/dts/currituck.dts
new file mode 100644
index 000000000000..b801dd06e573
--- /dev/null
+++ b/arch/powerpc/boot/dts/currituck.dts
@@ -0,0 +1,237 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright © 2011 Tony Breeds IBM Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000; // spin table
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "ibm,currituck";
+ compatible = "ibm,currituck";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ serial0 = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,476";
+ reg = <0>;
+ clock-frequency = <1600000000>; // 1.6 GHz
+ timebase-frequency = <100000000>; // 100Mhz
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "ok";
+ };
+ cpu@1 {
+ device_type = "cpu";
+ model = "PowerPC,476";
+ reg = <1>;
+ clock-frequency = <1600000000>; // 1.6 GHz
+ timebase-frequency = <100000000>; // 100Mhz
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "disabled";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x01f00000>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
+ };
+
+ MPIC: interrupt-controller {
+ compatible = "chrp,open-pic";
+ interrupt-controller;
+ dcr-reg = <0xffc00000 0x00040000>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+
+ };
+
+ plb {
+ compatible = "ibm,plb6";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clock-frequency = <200000000>; // 200Mhz
+
+ POB0: opb {
+ compatible = "ibm,opb-4xx", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* Wish there was a nicer way of specifying a full
+ * 32-bit range
+ */
+ ranges = <0x00000000 0x00000200 0x00000000 0x80000000
+ 0x80000000 0x00000200 0x80000000 0x80000000>;
+ clock-frequency = <100000000>;
+
+ UART0: serial@10000000 {
+ device_type = "serial";
+ compatible = "ns16750", "ns16550";
+ reg = <0x10000000 0x00000008>;
+ virtual-reg = <0xe1000000>;
+ clock-frequency = <1851851>; // PCIe refclk/MCGC0_CTL[UART]
+ current-speed = <115200>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <34 2>;
+ };
+
+ IIC0: i2c@00000000 {
+ compatible = "ibm,iic-currituck", "ibm,iic";
+ reg = <0x0 0x00000014>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <79 2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rtc@68 {
+ compatible = "stm,m41t80", "m41st85";
+ reg = <0x68>;
+ };
+ };
+ };
+
+ PCIE0: pciex@10100000000 { // 4xGBIF1
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+ primary;
+ port = <0x0>; /* port number */
+ reg = <0x00000101 0x00000000 0x0 0x10000000 /* Config space access */
+ 0x00000100 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
+ dcr-reg = <0x80 0x20>;
+
+// pci_space < pci_addr > < cpu_addr > < size >
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
+ 0x01000000 0x0 0x0 0x00000140 0x0 0x0 0x00010000>;
+
+ /* Inbound starting at 0 to memsize filled in by zImage */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &MPIC 46 0x2 /* int A */
+ 0x0 0x0 0x0 0x2 &MPIC 47 0x2 /* int B */
+ 0x0 0x0 0x0 0x3 &MPIC 48 0x2 /* int C */
+ 0x0 0x0 0x0 0x4 &MPIC 49 0x2 /* int D */>;
+ };
+
+ PCIE1: pciex@30100000000 { // 4xGBIF0
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+ primary;
+ port = <0x1>; /* port number */
+ reg = <0x00000301 0x00000000 0x0 0x10000000 /* Config space access */
+ 0x00000300 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
+ dcr-reg = <0x60 0x20>;
+
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000310 0x80000000 0x0 0x80000000
+ 0x01000000 0x0 0x0 0x00000340 0x0 0x0 0x00010000>;
+
+ /* Inbound starting at 0 to memsize filled in by zImage */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &MPIC 38 0x2 /* int A */
+ 0x0 0x0 0x0 0x2 &MPIC 39 0x2 /* int B */
+ 0x0 0x0 0x0 0x3 &MPIC 40 0x2 /* int C */
+ 0x0 0x0 0x0 0x4 &MPIC 41 0x2 /* int D */>;
+ };
+
+ PCIE2: pciex@38100000000 { // 2xGBIF0
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+ primary;
+ port = <0x2>; /* port number */
+ reg = <0x00000381 0x00000000 0x0 0x10000000 /* Config space access */
+ 0x00000380 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
+ dcr-reg = <0xA0 0x20>;
+
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000390 0x80000000 0x0 0x80000000
+ 0x01000000 0x0 0x0 0x000003C0 0x0 0x0 0x00010000>;
+
+ /* Inbound starting at 0 to memsize filled in by zImage */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &MPIC 54 0x2 /* int A */
+ 0x0 0x0 0x0 0x2 &MPIC 55 0x2 /* int B */
+ 0x0 0x0 0x0 0x3 &MPIC 56 0x2 /* int C */
+ 0x0 0x0 0x0 0x4 &MPIC 57 0x2 /* int D */>;
+ };
+
+ };
+
+ chosen {
+ linux,stdout-path = &UART0;
+ };
+};