summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/85xx/p1022_ds.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/85xx/p1022_ds.c')
-rw-r--r--arch/powerpc/platforms/85xx/p1022_ds.c207
1 files changed, 182 insertions, 25 deletions
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index b0984ada3f83..0fe88e39945e 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -33,6 +33,10 @@
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+#define PMUXCR_ELBCDIU_MASK 0xc0000000
+#define PMUXCR_ELBCDIU_NOR16 0x80000000
+#define PMUXCR_ELBCDIU_DIU 0x40000000
+
/*
* Board-specific initialization of the DIU. This code should probably be
* executed when the DIU is opened, rather than in arch code, but the DIU
@@ -50,11 +54,22 @@
#define CLKDVDR_PXCLK_MASK 0x00FF0000
/* Some ngPIXIS register definitions */
+#define PX_CTL 3
+#define PX_BRDCFG0 8
+#define PX_BRDCFG1 9
+
+#define PX_BRDCFG0_ELBC_SPI_MASK 0xc0
+#define PX_BRDCFG0_ELBC_SPI_ELBC 0x00
+#define PX_BRDCFG0_ELBC_SPI_NULL 0xc0
+#define PX_BRDCFG0_ELBC_DIU 0x02
+
#define PX_BRDCFG1_DVIEN 0x80
#define PX_BRDCFG1_DFPEN 0x40
#define PX_BRDCFG1_BACKLIGHT 0x20
#define PX_BRDCFG1_DDCEN 0x10
+#define PX_CTL_ALTACC 0x80
+
/*
* DIU Area Descriptor
*
@@ -133,44 +148,117 @@ static void p1022ds_set_gamma_table(enum fsl_diu_monitor_port port,
*/
static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
{
- struct device_node *np;
- void __iomem *pixis;
- u8 __iomem *brdcfg1;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-fpga");
- if (!np)
- /* older device trees used "fsl,p1022ds-pixis" */
- np = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis");
- if (!np) {
- pr_err("p1022ds: missing ngPIXIS node\n");
+ struct device_node *guts_node;
+ struct device_node *indirect_node = NULL;
+ struct ccsr_guts_85xx __iomem *guts;
+ u8 __iomem *lbc_lcs0_ba = NULL;
+ u8 __iomem *lbc_lcs1_ba = NULL;
+ u8 b;
+
+ /* Map the global utilities registers. */
+ guts_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");
+ if (!guts_node) {
+ pr_err("p1022ds: missing global utilties device node\n");
return;
}
- pixis = of_iomap(np, 0);
- if (!pixis) {
- pr_err("p1022ds: could not map ngPIXIS registers\n");
- return;
+ guts = of_iomap(guts_node, 0);
+ if (!guts) {
+ pr_err("p1022ds: could not map global utilties device\n");
+ goto exit;
}
- brdcfg1 = pixis + 9; /* BRDCFG1 is at offset 9 in the ngPIXIS */
+
+ indirect_node = of_find_compatible_node(NULL, NULL,
+ "fsl,p1022ds-indirect-pixis");
+ if (!indirect_node) {
+ pr_err("p1022ds: missing pixis indirect mode node\n");
+ goto exit;
+ }
+
+ lbc_lcs0_ba = of_iomap(indirect_node, 0);
+ if (!lbc_lcs0_ba) {
+ pr_err("p1022ds: could not map localbus chip select 0\n");
+ goto exit;
+ }
+
+ lbc_lcs1_ba = of_iomap(indirect_node, 1);
+ if (!lbc_lcs1_ba) {
+ pr_err("p1022ds: could not map localbus chip select 1\n");
+ goto exit;
+ }
+
+ /* Make sure we're in indirect mode first. */
+ if ((in_be32(&guts->pmuxcr) & PMUXCR_ELBCDIU_MASK) !=
+ PMUXCR_ELBCDIU_DIU) {
+ struct device_node *pixis_node;
+ void __iomem *pixis;
+
+ pixis_node =
+ of_find_compatible_node(NULL, NULL, "fsl,p1022ds-fpga");
+ if (!pixis_node) {
+ pr_err("p1022ds: missing pixis node\n");
+ goto exit;
+ }
+
+ pixis = of_iomap(pixis_node, 0);
+ of_node_put(pixis_node);
+ if (!pixis) {
+ pr_err("p1022ds: could not map pixis registers\n");
+ goto exit;
+ }
+
+ /* Enable indirect PIXIS mode. */
+ setbits8(pixis + PX_CTL, PX_CTL_ALTACC);
+ iounmap(pixis);
+
+ /* Switch the board mux to the DIU */
+ out_8(lbc_lcs0_ba, PX_BRDCFG0); /* BRDCFG0 */
+ b = in_8(lbc_lcs1_ba);
+ b |= PX_BRDCFG0_ELBC_DIU;
+ out_8(lbc_lcs1_ba, b);
+
+ /* Set the chip mux to DIU mode. */
+ clrsetbits_be32(&guts->pmuxcr, PMUXCR_ELBCDIU_MASK,
+ PMUXCR_ELBCDIU_DIU);
+ in_be32(&guts->pmuxcr);
+ }
+
switch (port) {
case FSL_DIU_PORT_DVI:
- printk(KERN_INFO "%s:%u\n", __func__, __LINE__);
/* Enable the DVI port, disable the DFP and the backlight */
- clrsetbits_8(brdcfg1, PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT,
- PX_BRDCFG1_DVIEN);
+ out_8(lbc_lcs0_ba, PX_BRDCFG1);
+ b = in_8(lbc_lcs1_ba);
+ b &= ~(PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT);
+ b |= PX_BRDCFG1_DVIEN;
+ out_8(lbc_lcs1_ba, b);
break;
case FSL_DIU_PORT_LVDS:
- printk(KERN_INFO "%s:%u\n", __func__, __LINE__);
+ /*
+ * LVDS also needs backlight enabled, otherwise the display
+ * will be blank.
+ */
/* Enable the DFP port, disable the DVI and the backlight */
- clrsetbits_8(brdcfg1, PX_BRDCFG1_DVIEN | PX_BRDCFG1_BACKLIGHT,
- PX_BRDCFG1_DFPEN);
+ out_8(lbc_lcs0_ba, PX_BRDCFG1);
+ b = in_8(lbc_lcs1_ba);
+ b &= ~PX_BRDCFG1_DVIEN;
+ b |= PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT;
+ out_8(lbc_lcs1_ba, b);
break;
default:
pr_err("p1022ds: unsupported monitor port %i\n", port);
}
- iounmap(pixis);
+exit:
+ if (lbc_lcs1_ba)
+ iounmap(lbc_lcs1_ba);
+ if (lbc_lcs0_ba)
+ iounmap(lbc_lcs0_ba);
+ if (guts)
+ iounmap(guts);
+
+ of_node_put(indirect_node);
+ of_node_put(guts_node);
}
/**
@@ -242,15 +330,56 @@ p1022ds_valid_monitor_port(enum fsl_diu_monitor_port port)
void __init p1022_ds_pic_init(void)
{
- struct mpic *mpic = mpic_alloc(NULL, 0,
- MPIC_WANTS_RESET |
- MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
+ struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
mpic_init(mpic);
}
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+
+/*
+ * Disables a node in the device tree.
+ *
+ * This function is called before kmalloc() is available, so the 'new' object
+ * should be allocated in the global area. The easiest way is to do that is
+ * to allocate one static local variable for each call to this function.
+ */
+static void __init disable_one_node(struct device_node *np, struct property *new)
+{
+ struct property *old;
+
+ old = of_find_property(np, new->name, NULL);
+ if (old)
+ prom_update_property(np, new, old);
+ else
+ prom_add_property(np, new);
+}
+
+/* TRUE if there is a "video=fslfb" command-line parameter. */
+static bool fslfb;
+
+/*
+ * Search for a "video=fslfb" command-line parameter, and set 'fslfb' to
+ * true if we find it.
+ *
+ * We need to use early_param() instead of __setup() because the normal
+ * __setup() gets called to late. However, early_param() gets called very
+ * early, before the device tree is unflattened, so all we can do now is set a
+ * global variable. Later on, p1022_ds_setup_arch() will use that variable
+ * to determine if we need to update the device tree.
+ */
+static int __init early_video_setup(char *options)
+{
+ fslfb = (strncmp(options, "fslfb:", 6) == 0);
+
+ return 0;
+}
+early_param("video", early_video_setup);
+
+#endif
+
/*
* Setup the architecture
*/
@@ -288,6 +417,34 @@ static void __init p1022_ds_setup_arch(void)
diu_ops.set_monitor_port = p1022ds_set_monitor_port;
diu_ops.set_pixel_clock = p1022ds_set_pixel_clock;
diu_ops.valid_monitor_port = p1022ds_valid_monitor_port;
+
+ /*
+ * Disable the NOR flash node if there is video=fslfb... command-line
+ * parameter. When the DIU is active, NOR flash is unavailable, so we
+ * have to disable the node before the MTD driver loads.
+ */
+ if (fslfb) {
+ struct device_node *np =
+ of_find_compatible_node(NULL, NULL, "fsl,p1022-elbc");
+
+ if (np) {
+ np = of_find_compatible_node(np, NULL, "cfi-flash");
+ if (np) {
+ static struct property nor_status = {
+ .name = "status",
+ .value = "disabled",
+ .length = sizeof("disabled"),
+ };
+
+ pr_info("p1022ds: disabling %s node",
+ np->full_name);
+ disable_one_node(np, &nor_status);
+ of_node_put(np);
+ }
+ }
+
+ }
+
#endif
mpc85xx_smp_init();