summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/pseries/eeh.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/pseries/eeh.c')
-rw-r--r--arch/powerpc/platforms/pseries/eeh.c1044
1 files changed, 462 insertions, 582 deletions
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index c0b40af4ce4f..8011088392d3 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -1,8 +1,8 @@
/*
- * eeh.c
* Copyright IBM Corporation 2001, 2005, 2006
* Copyright Dave Engebretsen & Todd Inglett 2001
* Copyright Linas Vepstas 2005, 2006
+ * Copyright 2001-2012 IBM Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -22,7 +22,7 @@
*/
#include <linux/delay.h>
-#include <linux/sched.h> /* for init_mm */
+#include <linux/sched.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/pci.h>
@@ -86,16 +86,8 @@
/* Time to wait for a PCI slot to report status, in milliseconds */
#define PCI_BUS_RESET_WAIT_MSEC (60*1000)
-/* RTAS tokens */
-static int ibm_set_eeh_option;
-static int ibm_set_slot_reset;
-static int ibm_read_slot_reset_state;
-static int ibm_read_slot_reset_state2;
-static int ibm_slot_error_detail;
-static int ibm_get_config_addr_info;
-static int ibm_get_config_addr_info2;
-static int ibm_configure_bridge;
-static int ibm_configure_pe;
+/* Platform dependent EEH operations */
+struct eeh_ops *eeh_ops = NULL;
int eeh_subsystem_enabled;
EXPORT_SYMBOL(eeh_subsystem_enabled);
@@ -103,14 +95,6 @@ EXPORT_SYMBOL(eeh_subsystem_enabled);
/* Lock to avoid races due to multiple reports of an error */
static DEFINE_RAW_SPINLOCK(confirm_error_lock);
-/* Buffer for reporting slot-error-detail rtas calls. Its here
- * in BSS, and not dynamically alloced, so that it ends up in
- * RMO where RTAS can access it.
- */
-static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX];
-static DEFINE_SPINLOCK(slot_errbuf_lock);
-static int eeh_error_buf_size;
-
/* Buffer for reporting pci register dumps. Its here in BSS, and
* not dynamically alloced, so that it ends up in RMO where RTAS
* can access it.
@@ -118,74 +102,50 @@ static int eeh_error_buf_size;
#define EEH_PCI_REGS_LOG_LEN 4096
static unsigned char pci_regs_buf[EEH_PCI_REGS_LOG_LEN];
-/* System monitoring statistics */
-static unsigned long no_device;
-static unsigned long no_dn;
-static unsigned long no_cfg_addr;
-static unsigned long ignored_check;
-static unsigned long total_mmio_ffs;
-static unsigned long false_positives;
-static unsigned long slot_resets;
-
-#define IS_BRIDGE(class_code) (((class_code)<<16) == PCI_BASE_CLASS_BRIDGE)
-
-/* --------------------------------------------------------------- */
-/* Below lies the EEH event infrastructure */
+/*
+ * The struct is used to maintain the EEH global statistic
+ * information. Besides, the EEH global statistics will be
+ * exported to user space through procfs
+ */
+struct eeh_stats {
+ u64 no_device; /* PCI device not found */
+ u64 no_dn; /* OF node not found */
+ u64 no_cfg_addr; /* Config address not found */
+ u64 ignored_check; /* EEH check skipped */
+ u64 total_mmio_ffs; /* Total EEH checks */
+ u64 false_positives; /* Unnecessary EEH checks */
+ u64 slot_resets; /* PE reset */
+};
-static void rtas_slot_error_detail(struct pci_dn *pdn, int severity,
- char *driver_log, size_t loglen)
-{
- int config_addr;
- unsigned long flags;
- int rc;
+static struct eeh_stats eeh_stats;
- /* Log the error with the rtas logger */
- spin_lock_irqsave(&slot_errbuf_lock, flags);
- memset(slot_errbuf, 0, eeh_error_buf_size);
-
- /* Use PE configuration address, if present */
- config_addr = pdn->eeh_config_addr;
- if (pdn->eeh_pe_config_addr)
- config_addr = pdn->eeh_pe_config_addr;
-
- rc = rtas_call(ibm_slot_error_detail,
- 8, 1, NULL, config_addr,
- BUID_HI(pdn->phb->buid),
- BUID_LO(pdn->phb->buid),
- virt_to_phys(driver_log), loglen,
- virt_to_phys(slot_errbuf),
- eeh_error_buf_size,
- severity);
-
- if (rc == 0)
- log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0);
- spin_unlock_irqrestore(&slot_errbuf_lock, flags);
-}
+#define IS_BRIDGE(class_code) (((class_code)<<16) == PCI_BASE_CLASS_BRIDGE)
/**
- * gather_pci_data - copy assorted PCI config space registers to buff
- * @pdn: device to report data for
+ * eeh_gather_pci_data - Copy assorted PCI config space registers to buff
+ * @edev: device to report data for
* @buf: point to buffer in which to log
* @len: amount of room in buffer
*
* This routine captures assorted PCI configuration space data,
* and puts them into a buffer for RTAS error logging.
*/
-static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len)
+static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
{
- struct pci_dev *dev = pdn->pcidev;
+ struct device_node *dn = eeh_dev_to_of_node(edev);
+ struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
u32 cfg;
int cap, i;
int n = 0;
- n += scnprintf(buf+n, len-n, "%s\n", pdn->node->full_name);
- printk(KERN_WARNING "EEH: of node=%s\n", pdn->node->full_name);
+ n += scnprintf(buf+n, len-n, "%s\n", dn->full_name);
+ printk(KERN_WARNING "EEH: of node=%s\n", dn->full_name);
- rtas_read_config(pdn, PCI_VENDOR_ID, 4, &cfg);
+ eeh_ops->read_config(dn, PCI_VENDOR_ID, 4, &cfg);
n += scnprintf(buf+n, len-n, "dev/vend:%08x\n", cfg);
printk(KERN_WARNING "EEH: PCI device/vendor: %08x\n", cfg);
- rtas_read_config(pdn, PCI_COMMAND, 4, &cfg);
+ eeh_ops->read_config(dn, PCI_COMMAND, 4, &cfg);
n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg);
printk(KERN_WARNING "EEH: PCI cmd/status register: %08x\n", cfg);
@@ -196,11 +156,11 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len)
/* Gather bridge-specific registers */
if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) {
- rtas_read_config(pdn, PCI_SEC_STATUS, 2, &cfg);
+ eeh_ops->read_config(dn, PCI_SEC_STATUS, 2, &cfg);
n += scnprintf(buf+n, len-n, "sec stat:%x\n", cfg);
printk(KERN_WARNING "EEH: Bridge secondary status: %04x\n", cfg);
- rtas_read_config(pdn, PCI_BRIDGE_CONTROL, 2, &cfg);
+ eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &cfg);
n += scnprintf(buf+n, len-n, "brdg ctl:%x\n", cfg);
printk(KERN_WARNING "EEH: Bridge control: %04x\n", cfg);
}
@@ -208,11 +168,11 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len)
/* Dump out the PCI-X command and status regs */
cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
if (cap) {
- rtas_read_config(pdn, cap, 4, &cfg);
+ eeh_ops->read_config(dn, cap, 4, &cfg);
n += scnprintf(buf+n, len-n, "pcix-cmd:%x\n", cfg);
printk(KERN_WARNING "EEH: PCI-X cmd: %08x\n", cfg);
- rtas_read_config(pdn, cap+4, 4, &cfg);
+ eeh_ops->read_config(dn, cap+4, 4, &cfg);
n += scnprintf(buf+n, len-n, "pcix-stat:%x\n", cfg);
printk(KERN_WARNING "EEH: PCI-X status: %08x\n", cfg);
}
@@ -225,7 +185,7 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len)
"EEH: PCI-E capabilities and status follow:\n");
for (i=0; i<=8; i++) {
- rtas_read_config(pdn, cap+4*i, 4, &cfg);
+ eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
printk(KERN_WARNING "EEH: PCI-E %02x: %08x\n", i, cfg);
}
@@ -237,7 +197,7 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len)
"EEH: PCI-E AER capability register set follows:\n");
for (i=0; i<14; i++) {
- rtas_read_config(pdn, cap+4*i, 4, &cfg);
+ eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
printk(KERN_WARNING "EEH: PCI-E AER %02x: %08x\n", i, cfg);
}
@@ -246,111 +206,46 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len)
/* Gather status on devices under the bridge */
if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) {
- struct device_node *dn;
+ struct device_node *child;
- for_each_child_of_node(pdn->node, dn) {
- pdn = PCI_DN(dn);
- if (pdn)
- n += gather_pci_data(pdn, buf+n, len-n);
+ for_each_child_of_node(dn, child) {
+ if (of_node_to_eeh_dev(child))
+ n += eeh_gather_pci_data(of_node_to_eeh_dev(child), buf+n, len-n);
}
}
return n;
}
-void eeh_slot_error_detail(struct pci_dn *pdn, int severity)
-{
- size_t loglen = 0;
- pci_regs_buf[0] = 0;
-
- rtas_pci_enable(pdn, EEH_THAW_MMIO);
- rtas_configure_bridge(pdn);
- eeh_restore_bars(pdn);
- loglen = gather_pci_data(pdn, pci_regs_buf, EEH_PCI_REGS_LOG_LEN);
-
- rtas_slot_error_detail(pdn, severity, pci_regs_buf, loglen);
-}
-
/**
- * read_slot_reset_state - Read the reset state of a device node's slot
- * @dn: device node to read
- * @rets: array to return results in
- */
-static int read_slot_reset_state(struct pci_dn *pdn, int rets[])
-{
- int token, outputs;
- int config_addr;
-
- if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) {
- token = ibm_read_slot_reset_state2;
- outputs = 4;
- } else {
- token = ibm_read_slot_reset_state;
- rets[2] = 0; /* fake PE Unavailable info */
- outputs = 3;
- }
-
- /* Use PE configuration address, if present */
- config_addr = pdn->eeh_config_addr;
- if (pdn->eeh_pe_config_addr)
- config_addr = pdn->eeh_pe_config_addr;
-
- return rtas_call(token, 3, outputs, rets, config_addr,
- BUID_HI(pdn->phb->buid), BUID_LO(pdn->phb->buid));
-}
-
-/**
- * eeh_wait_for_slot_status - returns error status of slot
- * @pdn pci device node
- * @max_wait_msecs maximum number to millisecs to wait
- *
- * Return negative value if a permanent error, else return
- * Partition Endpoint (PE) status value.
+ * eeh_slot_error_detail - Generate combined log including driver log and error log
+ * @edev: device to report error log for
+ * @severity: temporary or permanent error log
*
- * If @max_wait_msecs is positive, then this routine will
- * sleep until a valid status can be obtained, or until
- * the max allowed wait time is exceeded, in which case
- * a -2 is returned.
+ * This routine should be called to generate the combined log, which
+ * is comprised of driver log and error log. The driver log is figured
+ * out from the config space of the corresponding PCI device, while
+ * the error log is fetched through platform dependent function call.
*/
-int
-eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs)
+void eeh_slot_error_detail(struct eeh_dev *edev, int severity)
{
- int rc;
- int rets[3];
- int mwait;
-
- while (1) {
- rc = read_slot_reset_state(pdn, rets);
- if (rc) return rc;
- if (rets[1] == 0) return -1; /* EEH is not supported */
-
- if (rets[0] != 5) return rets[0]; /* return actual status */
-
- if (rets[2] == 0) return -1; /* permanently unavailable */
+ size_t loglen = 0;
+ pci_regs_buf[0] = 0;
- if (max_wait_msecs <= 0) break;
+ eeh_pci_enable(edev, EEH_OPT_THAW_MMIO);
+ eeh_ops->configure_bridge(eeh_dev_to_of_node(edev));
+ eeh_restore_bars(edev);
+ loglen = eeh_gather_pci_data(edev, pci_regs_buf, EEH_PCI_REGS_LOG_LEN);
- mwait = rets[2];
- if (mwait <= 0) {
- printk (KERN_WARNING
- "EEH: Firmware returned bad wait value=%d\n", mwait);
- mwait = 1000;
- } else if (mwait > 300*1000) {
- printk (KERN_WARNING
- "EEH: Firmware is taking too long, time=%d\n", mwait);
- mwait = 300*1000;
- }
- max_wait_msecs -= mwait;
- msleep (mwait);
- }
-
- printk(KERN_WARNING "EEH: Timed out waiting for slot status\n");
- return -2;
+ eeh_ops->get_log(eeh_dev_to_of_node(edev), severity, pci_regs_buf, loglen);
}
/**
- * eeh_token_to_phys - convert EEH address token to phys address
- * @token i/o token, should be address in the form 0xA....
+ * eeh_token_to_phys - Convert EEH address token to phys address
+ * @token: I/O token, should be address in the form 0xA....
+ *
+ * This routine should be called to convert virtual I/O address
+ * to physical one.
*/
static inline unsigned long eeh_token_to_phys(unsigned long token)
{
@@ -365,36 +260,43 @@ static inline unsigned long eeh_token_to_phys(unsigned long token)
return pa | (token & (PAGE_SIZE-1));
}
-/**
- * Return the "partitionable endpoint" (pe) under which this device lies
+/**
+ * eeh_find_device_pe - Retrieve the PE for the given device
+ * @dn: device node
+ *
+ * Return the PE under which this device lies
*/
-struct device_node * find_device_pe(struct device_node *dn)
+struct device_node *eeh_find_device_pe(struct device_node *dn)
{
- while ((dn->parent) && PCI_DN(dn->parent) &&
- (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) {
+ while (dn->parent && of_node_to_eeh_dev(dn->parent) &&
+ (of_node_to_eeh_dev(dn->parent)->mode & EEH_MODE_SUPPORTED)) {
dn = dn->parent;
}
return dn;
}
-/** Mark all devices that are children of this device as failed.
- * Mark the device driver too, so that it can see the failure
- * immediately; this is critical, since some drivers poll
- * status registers in interrupts ... If a driver is polling,
- * and the slot is frozen, then the driver can deadlock in
- * an interrupt context, which is bad.
+/**
+ * __eeh_mark_slot - Mark all child devices as failed
+ * @parent: parent device
+ * @mode_flag: failure flag
+ *
+ * Mark all devices that are children of this device as failed.
+ * Mark the device driver too, so that it can see the failure
+ * immediately; this is critical, since some drivers poll
+ * status registers in interrupts ... If a driver is polling,
+ * and the slot is frozen, then the driver can deadlock in
+ * an interrupt context, which is bad.
*/
-
static void __eeh_mark_slot(struct device_node *parent, int mode_flag)
{
struct device_node *dn;
for_each_child_of_node(parent, dn) {
- if (PCI_DN(dn)) {
+ if (of_node_to_eeh_dev(dn)) {
/* Mark the pci device driver too */
- struct pci_dev *dev = PCI_DN(dn)->pcidev;
+ struct pci_dev *dev = of_node_to_eeh_dev(dn)->pdev;
- PCI_DN(dn)->eeh_mode |= mode_flag;
+ of_node_to_eeh_dev(dn)->mode |= mode_flag;
if (dev && dev->driver)
dev->error_state = pci_channel_io_frozen;
@@ -404,92 +306,81 @@ static void __eeh_mark_slot(struct device_node *parent, int mode_flag)
}
}
-void eeh_mark_slot (struct device_node *dn, int mode_flag)
+/**
+ * eeh_mark_slot - Mark the indicated device and its children as failed
+ * @dn: parent device
+ * @mode_flag: failure flag
+ *
+ * Mark the indicated device and its child devices as failed.
+ * The device drivers are marked as failed as well.
+ */
+void eeh_mark_slot(struct device_node *dn, int mode_flag)
{
struct pci_dev *dev;
- dn = find_device_pe (dn);
+ dn = eeh_find_device_pe(dn);
/* Back up one, since config addrs might be shared */
- if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
+ if (!pcibios_find_pci_bus(dn) && of_node_to_eeh_dev(dn->parent))
dn = dn->parent;
- PCI_DN(dn)->eeh_mode |= mode_flag;
+ of_node_to_eeh_dev(dn)->mode |= mode_flag;
/* Mark the pci device too */
- dev = PCI_DN(dn)->pcidev;
+ dev = of_node_to_eeh_dev(dn)->pdev;
if (dev)
dev->error_state = pci_channel_io_frozen;
__eeh_mark_slot(dn, mode_flag);
}
+/**
+ * __eeh_clear_slot - Clear failure flag for the child devices
+ * @parent: parent device
+ * @mode_flag: flag to be cleared
+ *
+ * Clear failure flag for the child devices.
+ */
static void __eeh_clear_slot(struct device_node *parent, int mode_flag)
{
struct device_node *dn;
for_each_child_of_node(parent, dn) {
- if (PCI_DN(dn)) {
- PCI_DN(dn)->eeh_mode &= ~mode_flag;
- PCI_DN(dn)->eeh_check_count = 0;
+ if (of_node_to_eeh_dev(dn)) {
+ of_node_to_eeh_dev(dn)->mode &= ~mode_flag;
+ of_node_to_eeh_dev(dn)->check_count = 0;
__eeh_clear_slot(dn, mode_flag);
}
}
}
-void eeh_clear_slot (struct device_node *dn, int mode_flag)
+/**
+ * eeh_clear_slot - Clear failure flag for the indicated device and its children
+ * @dn: parent device
+ * @mode_flag: flag to be cleared
+ *
+ * Clear failure flag for the indicated device and its children.
+ */
+void eeh_clear_slot(struct device_node *dn, int mode_flag)
{
unsigned long flags;
raw_spin_lock_irqsave(&confirm_error_lock, flags);
- dn = find_device_pe (dn);
+ dn = eeh_find_device_pe(dn);
/* Back up one, since config addrs might be shared */
- if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
+ if (!pcibios_find_pci_bus(dn) && of_node_to_eeh_dev(dn->parent))
dn = dn->parent;
- PCI_DN(dn)->eeh_mode &= ~mode_flag;
- PCI_DN(dn)->eeh_check_count = 0;
+ of_node_to_eeh_dev(dn)->mode &= ~mode_flag;
+ of_node_to_eeh_dev(dn)->check_count = 0;
__eeh_clear_slot(dn, mode_flag);
raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
}
-void __eeh_set_pe_freset(struct device_node *parent, unsigned int *freset)
-{
- struct device_node *dn;
-
- for_each_child_of_node(parent, dn) {
- if (PCI_DN(dn)) {
-
- struct pci_dev *dev = PCI_DN(dn)->pcidev;
-
- if (dev && dev->driver)
- *freset |= dev->needs_freset;
-
- __eeh_set_pe_freset(dn, freset);
- }
- }
-}
-
-void eeh_set_pe_freset(struct device_node *dn, unsigned int *freset)
-{
- struct pci_dev *dev;
- dn = find_device_pe(dn);
-
- /* Back up one, since config addrs might be shared */
- if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
- dn = dn->parent;
-
- dev = PCI_DN(dn)->pcidev;
- if (dev)
- *freset |= dev->needs_freset;
-
- __eeh_set_pe_freset(dn, freset);
-}
-
/**
- * eeh_dn_check_failure - check if all 1's data is due to EEH slot freeze
- * @dn device node
- * @dev pci device, if known
+ * eeh_dn_check_failure - Check if all 1's data is due to EEH slot freeze
+ * @dn: device node
+ * @dev: pci device, if known
*
* Check for an EEH failure for the given device node. Call this
* routine if the result of a read was all 0xff's and you want to
@@ -504,35 +395,34 @@ void eeh_set_pe_freset(struct device_node *dn, unsigned int *freset)
int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
{
int ret;
- int rets[3];
unsigned long flags;
- struct pci_dn *pdn;
+ struct eeh_dev *edev;
int rc = 0;
const char *location;
- total_mmio_ffs++;
+ eeh_stats.total_mmio_ffs++;
if (!eeh_subsystem_enabled)
return 0;
if (!dn) {
- no_dn++;
+ eeh_stats.no_dn++;
return 0;
}
- dn = find_device_pe(dn);
- pdn = PCI_DN(dn);
+ dn = eeh_find_device_pe(dn);
+ edev = of_node_to_eeh_dev(dn);
/* Access to IO BARs might get this far and still not want checking. */
- if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) ||
- pdn->eeh_mode & EEH_MODE_NOCHECK) {
- ignored_check++;
+ if (!(edev->mode & EEH_MODE_SUPPORTED) ||
+ edev->mode & EEH_MODE_NOCHECK) {
+ eeh_stats.ignored_check++;
pr_debug("EEH: Ignored check (%x) for %s %s\n",
- pdn->eeh_mode, eeh_pci_name(dev), dn->full_name);
+ edev->mode, eeh_pci_name(dev), dn->full_name);
return 0;
}
- if (!pdn->eeh_config_addr && !pdn->eeh_pe_config_addr) {
- no_cfg_addr++;
+ if (!edev->config_addr && !edev->pe_config_addr) {
+ eeh_stats.no_cfg_addr++;
return 0;
}
@@ -544,15 +434,15 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
*/
raw_spin_lock_irqsave(&confirm_error_lock, flags);
rc = 1;
- if (pdn->eeh_mode & EEH_MODE_ISOLATED) {
- pdn->eeh_check_count ++;
- if (pdn->eeh_check_count % EEH_MAX_FAILS == 0) {
+ if (edev->mode & EEH_MODE_ISOLATED) {
+ edev->check_count++;
+ if (edev->check_count % EEH_MAX_FAILS == 0) {
location = of_get_property(dn, "ibm,loc-code", NULL);
- printk (KERN_ERR "EEH: %d reads ignored for recovering device at "
+ printk(KERN_ERR "EEH: %d reads ignored for recovering device at "
"location=%s driver=%s pci addr=%s\n",
- pdn->eeh_check_count, location,
+ edev->check_count, location,
eeh_driver_name(dev), eeh_pci_name(dev));
- printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n",
+ printk(KERN_ERR "EEH: Might be infinite loop in %s driver\n",
eeh_driver_name(dev));
dump_stack();
}
@@ -566,58 +456,39 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
* function zero of a multi-function device.
* In any case they must share a common PHB.
*/
- ret = read_slot_reset_state(pdn, rets);
-
- /* If the call to firmware failed, punt */
- if (ret != 0) {
- printk(KERN_WARNING "EEH: read_slot_reset_state() failed; rc=%d dn=%s\n",
- ret, dn->full_name);
- false_positives++;
- pdn->eeh_false_positives ++;
- rc = 0;
- goto dn_unlock;
- }
+ ret = eeh_ops->get_state(dn, NULL);
/* Note that config-io to empty slots may fail;
- * they are empty when they don't have children. */
- if ((rets[0] == 5) && (rets[2] == 0) && (dn->child == NULL)) {
- false_positives++;
- pdn->eeh_false_positives ++;
- rc = 0;
- goto dn_unlock;
- }
-
- /* If EEH is not supported on this device, punt. */
- if (rets[1] != 1) {
- printk(KERN_WARNING "EEH: event on unsupported device, rc=%d dn=%s\n",
- ret, dn->full_name);
- false_positives++;
- pdn->eeh_false_positives ++;
- rc = 0;
- goto dn_unlock;
- }
-
- /* If not the kind of error we know about, punt. */
- if (rets[0] != 1 && rets[0] != 2 && rets[0] != 4 && rets[0] != 5) {
- false_positives++;
- pdn->eeh_false_positives ++;
+ * they are empty when they don't have children.
+ * We will punt with the following conditions: Failure to get
+ * PE's state, EEH not support and Permanently unavailable
+ * state, PE is in good state.
+ */
+ if ((ret < 0) ||
+ (ret == EEH_STATE_NOT_SUPPORT) ||
+ (ret & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) ==
+ (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) {
+ eeh_stats.false_positives++;
+ edev->false_positives ++;
rc = 0;
goto dn_unlock;
}
- slot_resets++;
+ eeh_stats.slot_resets++;
/* Avoid repeated reports of this failure, including problems
* with other functions on this device, and functions under
- * bridges. */
- eeh_mark_slot (dn, EEH_MODE_ISOLATED);
+ * bridges.
+ */
+ eeh_mark_slot(dn, EEH_MODE_ISOLATED);
raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
- eeh_send_failure_event (dn, dev);
+ eeh_send_failure_event(edev);
/* Most EEH events are due to device driver bugs. Having
* a stack trace will help the device-driver authors figure
- * out what happened. So print that out. */
+ * out what happened. So print that out.
+ */
dump_stack();
return 1;
@@ -629,9 +500,9 @@ dn_unlock:
EXPORT_SYMBOL_GPL(eeh_dn_check_failure);
/**
- * eeh_check_failure - check if all 1's data is due to EEH slot freeze
- * @token i/o token, should be address in the form 0xA....
- * @val value, should be all 1's (XXX why do we need this arg??)
+ * eeh_check_failure - Check if all 1's data is due to EEH slot freeze
+ * @token: I/O token, should be address in the form 0xA....
+ * @val: value, should be all 1's (XXX why do we need this arg??)
*
* Check for an EEH failure at the given token address. Call this
* routine if the result of a read was all 0xff's and you want to
@@ -648,14 +519,14 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon
/* Finding the phys addr + pci device; this is pretty quick. */
addr = eeh_token_to_phys((unsigned long __force) token);
- dev = pci_get_device_by_addr(addr);
+ dev = pci_addr_cache_get_device(addr);
if (!dev) {
- no_device++;
+ eeh_stats.no_device++;
return val;
}
dn = pci_device_to_OF_node(dev);
- eeh_dn_check_failure (dn, dev);
+ eeh_dn_check_failure(dn, dev);
pci_dev_put(dev);
return val;
@@ -663,115 +534,54 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon
EXPORT_SYMBOL(eeh_check_failure);
-/* ------------------------------------------------------------- */
-/* The code below deals with error recovery */
/**
- * rtas_pci_enable - enable MMIO or DMA transfers for this slot
- * @pdn pci device node
+ * eeh_pci_enable - Enable MMIO or DMA transfers for this slot
+ * @edev: pci device node
+ *
+ * This routine should be called to reenable frozen MMIO or DMA
+ * so that it would work correctly again. It's useful while doing
+ * recovery or log collection on the indicated device.
*/
-
-int
-rtas_pci_enable(struct pci_dn *pdn, int function)
+int eeh_pci_enable(struct eeh_dev *edev, int function)
{
- int config_addr;
int rc;
+ struct device_node *dn = eeh_dev_to_of_node(edev);
- /* Use PE configuration address, if present */
- config_addr = pdn->eeh_config_addr;
- if (pdn->eeh_pe_config_addr)
- config_addr = pdn->eeh_pe_config_addr;
-
- rc = rtas_call(ibm_set_eeh_option, 4, 1, NULL,
- config_addr,
- BUID_HI(pdn->phb->buid),
- BUID_LO(pdn->phb->buid),
- function);
-
+ rc = eeh_ops->set_option(dn, function);
if (rc)
printk(KERN_WARNING "EEH: Unexpected state change %d, err=%d dn=%s\n",
- function, rc, pdn->node->full_name);
+ function, rc, dn->full_name);
- rc = eeh_wait_for_slot_status (pdn, PCI_BUS_RESET_WAIT_MSEC);
- if ((rc == 4) && (function == EEH_THAW_MMIO))
+ rc = eeh_ops->wait_state(dn, PCI_BUS_RESET_WAIT_MSEC);
+ if (rc > 0 && (rc & EEH_STATE_MMIO_ENABLED) &&
+ (function == EEH_OPT_THAW_MMIO))
return 0;
return rc;
}
/**
- * rtas_pci_slot_reset - raises/lowers the pci #RST line
- * @pdn pci device node
- * @state: 1/0 to raise/lower the #RST
- *
- * Clear the EEH-frozen condition on a slot. This routine
- * asserts the PCI #RST line if the 'state' argument is '1',
- * and drops the #RST line if 'state is '0'. This routine is
- * safe to call in an interrupt context.
- *
- */
-
-static void
-rtas_pci_slot_reset(struct pci_dn *pdn, int state)
-{
- int config_addr;
- int rc;
-
- BUG_ON (pdn==NULL);
-
- if (!pdn->phb) {
- printk (KERN_WARNING "EEH: in slot reset, device node %s has no phb\n",
- pdn->node->full_name);
- return;
- }
-
- /* Use PE configuration address, if present */
- config_addr = pdn->eeh_config_addr;
- if (pdn->eeh_pe_config_addr)
- config_addr = pdn->eeh_pe_config_addr;
-
- rc = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
- config_addr,
- BUID_HI(pdn->phb->buid),
- BUID_LO(pdn->phb->buid),
- state);
-
- /* Fundamental-reset not supported on this PE, try hot-reset */
- if (rc == -8 && state == 3) {
- rc = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
- config_addr,
- BUID_HI(pdn->phb->buid),
- BUID_LO(pdn->phb->buid), 1);
- if (rc)
- printk(KERN_WARNING
- "EEH: Unable to reset the failed slot,"
- " #RST=%d dn=%s\n",
- rc, pdn->node->full_name);
- }
-}
-
-/**
* pcibios_set_pcie_slot_reset - Set PCI-E reset state
- * @dev: pci device struct
- * @state: reset state to enter
+ * @dev: pci device struct
+ * @state: reset state to enter
*
* Return value:
* 0 if success
- **/
+ */
int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
{
struct device_node *dn = pci_device_to_OF_node(dev);
- struct pci_dn *pdn = PCI_DN(dn);
switch (state) {
case pcie_deassert_reset:
- rtas_pci_slot_reset(pdn, 0);
+ eeh_ops->reset(dn, EEH_RESET_DEACTIVATE);
break;
case pcie_hot_reset:
- rtas_pci_slot_reset(pdn, 1);
+ eeh_ops->reset(dn, EEH_RESET_HOT);
break;
case pcie_warm_reset:
- rtas_pci_slot_reset(pdn, 3);
+ eeh_ops->reset(dn, EEH_RESET_FUNDAMENTAL);
break;
default:
return -EINVAL;
@@ -781,13 +591,66 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat
}
/**
- * rtas_set_slot_reset -- assert the pci #RST line for 1/4 second
- * @pdn: pci device node to be reset.
+ * __eeh_set_pe_freset - Check the required reset for child devices
+ * @parent: parent device
+ * @freset: return value
+ *
+ * Each device might have its preferred reset type: fundamental or
+ * hot reset. The routine is used to collect the information from
+ * the child devices so that they could be reset accordingly.
+ */
+void __eeh_set_pe_freset(struct device_node *parent, unsigned int *freset)
+{
+ struct device_node *dn;
+
+ for_each_child_of_node(parent, dn) {
+ if (of_node_to_eeh_dev(dn)) {
+ struct pci_dev *dev = of_node_to_eeh_dev(dn)->pdev;
+
+ if (dev && dev->driver)
+ *freset |= dev->needs_freset;
+
+ __eeh_set_pe_freset(dn, freset);
+ }
+ }
+}
+
+/**
+ * eeh_set_pe_freset - Check the required reset for the indicated device and its children
+ * @dn: parent device
+ * @freset: return value
+ *
+ * Each device might have its preferred reset type: fundamental or
+ * hot reset. The routine is used to collected the information for
+ * the indicated device and its children so that the bunch of the
+ * devices could be reset properly.
*/
+void eeh_set_pe_freset(struct device_node *dn, unsigned int *freset)
+{
+ struct pci_dev *dev;
+ dn = eeh_find_device_pe(dn);
+
+ /* Back up one, since config addrs might be shared */
+ if (!pcibios_find_pci_bus(dn) && of_node_to_eeh_dev(dn->parent))
+ dn = dn->parent;
+
+ dev = of_node_to_eeh_dev(dn)->pdev;
+ if (dev)
+ *freset |= dev->needs_freset;
-static void __rtas_set_slot_reset(struct pci_dn *pdn)
+ __eeh_set_pe_freset(dn, freset);
+}
+
+/**
+ * eeh_reset_pe_once - Assert the pci #RST line for 1/4 second
+ * @edev: pci device node to be reset.
+ *
+ * Assert the PCI #RST line for 1/4 second.
+ */
+static void eeh_reset_pe_once(struct eeh_dev *edev)
{
unsigned int freset = 0;
+ struct device_node *dn = eeh_dev_to_of_node(edev);
/* Determine type of EEH reset required for
* Partitionable Endpoint, a hot-reset (1)
@@ -795,58 +658,68 @@ static void __rtas_set_slot_reset(struct pci_dn *pdn)
* A fundamental reset required by any device under
* Partitionable Endpoint trumps hot-reset.
*/
- eeh_set_pe_freset(pdn->node, &freset);
+ eeh_set_pe_freset(dn, &freset);
if (freset)
- rtas_pci_slot_reset(pdn, 3);
+ eeh_ops->reset(dn, EEH_RESET_FUNDAMENTAL);
else
- rtas_pci_slot_reset(pdn, 1);
+ eeh_ops->reset(dn, EEH_RESET_HOT);
/* The PCI bus requires that the reset be held high for at least
- * a 100 milliseconds. We wait a bit longer 'just in case'. */
-
+ * a 100 milliseconds. We wait a bit longer 'just in case'.
+ */
#define PCI_BUS_RST_HOLD_TIME_MSEC 250
- msleep (PCI_BUS_RST_HOLD_TIME_MSEC);
+ msleep(PCI_BUS_RST_HOLD_TIME_MSEC);
/* We might get hit with another EEH freeze as soon as the
* pci slot reset line is dropped. Make sure we don't miss
- * these, and clear the flag now. */
- eeh_clear_slot (pdn->node, EEH_MODE_ISOLATED);
+ * these, and clear the flag now.
+ */
+ eeh_clear_slot(dn, EEH_MODE_ISOLATED);
- rtas_pci_slot_reset (pdn, 0);
+ eeh_ops->reset(dn, EEH_RESET_DEACTIVATE);
/* After a PCI slot has been reset, the PCI Express spec requires
* a 1.5 second idle time for the bus to stabilize, before starting
- * up traffic. */
+ * up traffic.
+ */
#define PCI_BUS_SETTLE_TIME_MSEC 1800
- msleep (PCI_BUS_SETTLE_TIME_MSEC);
+ msleep(PCI_BUS_SETTLE_TIME_MSEC);
}
-int rtas_set_slot_reset(struct pci_dn *pdn)
+/**
+ * eeh_reset_pe - Reset the indicated PE
+ * @edev: PCI device associated EEH device
+ *
+ * This routine should be called to reset indicated device, including
+ * PE. A PE might include multiple PCI devices and sometimes PCI bridges
+ * might be involved as well.
+ */
+int eeh_reset_pe(struct eeh_dev *edev)
{
int i, rc;
+ struct device_node *dn = eeh_dev_to_of_node(edev);
/* Take three shots at resetting the bus */
for (i=0; i<3; i++) {
- __rtas_set_slot_reset(pdn);
+ eeh_reset_pe_once(edev);
- rc = eeh_wait_for_slot_status(pdn, PCI_BUS_RESET_WAIT_MSEC);
- if (rc == 0)
+ rc = eeh_ops->wait_state(dn, PCI_BUS_RESET_WAIT_MSEC);
+ if (rc == (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE))
return 0;
if (rc < 0) {
printk(KERN_ERR "EEH: unrecoverable slot failure %s\n",
- pdn->node->full_name);
+ dn->full_name);
return -1;
}
printk(KERN_ERR "EEH: bus reset %d failed on slot %s, rc=%d\n",
- i+1, pdn->node->full_name, rc);
+ i+1, dn->full_name, rc);
}
return -1;
}
-/* ------------------------------------------------------- */
/** Save and restore of PCI BARs
*
* Although firmware will set up BARs during boot, it doesn't
@@ -856,181 +729,122 @@ int rtas_set_slot_reset(struct pci_dn *pdn)
*/
/**
- * __restore_bars - Restore the Base Address Registers
- * @pdn: pci device node
+ * eeh_restore_one_device_bars - Restore the Base Address Registers for one device
+ * @edev: PCI device associated EEH device
*
* Loads the PCI configuration space base address registers,
* the expansion ROM base address, the latency timer, and etc.
* from the saved values in the device node.
*/
-static inline void __restore_bars (struct pci_dn *pdn)
+static inline void eeh_restore_one_device_bars(struct eeh_dev *edev)
{
int i;
u32 cmd;
+ struct device_node *dn = eeh_dev_to_of_node(edev);
+
+ if (!edev->phb)
+ return;
- if (NULL==pdn->phb) return;
for (i=4; i<10; i++) {
- rtas_write_config(pdn, i*4, 4, pdn->config_space[i]);
+ eeh_ops->write_config(dn, i*4, 4, edev->config_space[i]);
}
/* 12 == Expansion ROM Address */
- rtas_write_config(pdn, 12*4, 4, pdn->config_space[12]);
+ eeh_ops->write_config(dn, 12*4, 4, edev->config_space[12]);
#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF))
-#define SAVED_BYTE(OFF) (((u8 *)(pdn->config_space))[BYTE_SWAP(OFF)])
+#define SAVED_BYTE(OFF) (((u8 *)(edev->config_space))[BYTE_SWAP(OFF)])
- rtas_write_config (pdn, PCI_CACHE_LINE_SIZE, 1,
+ eeh_ops->write_config(dn, PCI_CACHE_LINE_SIZE, 1,
SAVED_BYTE(PCI_CACHE_LINE_SIZE));
- rtas_write_config (pdn, PCI_LATENCY_TIMER, 1,
+ eeh_ops->write_config(dn, PCI_LATENCY_TIMER, 1,
SAVED_BYTE(PCI_LATENCY_TIMER));
/* max latency, min grant, interrupt pin and line */
- rtas_write_config(pdn, 15*4, 4, pdn->config_space[15]);
+ eeh_ops->write_config(dn, 15*4, 4, edev->config_space[15]);
/* Restore PERR & SERR bits, some devices require it,
- don't touch the other command bits */
- rtas_read_config(pdn, PCI_COMMAND, 4, &cmd);
- if (pdn->config_space[1] & PCI_COMMAND_PARITY)
+ * don't touch the other command bits
+ */
+ eeh_ops->read_config(dn, PCI_COMMAND, 4, &cmd);
+ if (edev->config_space[1] & PCI_COMMAND_PARITY)
cmd |= PCI_COMMAND_PARITY;
else
cmd &= ~PCI_COMMAND_PARITY;
- if (pdn->config_space[1] & PCI_COMMAND_SERR)
+ if (edev->config_space[1] & PCI_COMMAND_SERR)
cmd |= PCI_COMMAND_SERR;
else
cmd &= ~PCI_COMMAND_SERR;
- rtas_write_config(pdn, PCI_COMMAND, 4, cmd);
+ eeh_ops->write_config(dn, PCI_COMMAND, 4, cmd);
}
/**
- * eeh_restore_bars - restore the PCI config space info
+ * eeh_restore_bars - Restore the PCI config space info
+ * @edev: EEH device
*
* This routine performs a recursive walk to the children
* of this device as well.
*/
-void eeh_restore_bars(struct pci_dn *pdn)
+void eeh_restore_bars(struct eeh_dev *edev)
{
struct device_node *dn;
- if (!pdn)
+ if (!edev)
return;
- if ((pdn->eeh_mode & EEH_MODE_SUPPORTED) && !IS_BRIDGE(pdn->class_code))
- __restore_bars (pdn);
+ if ((edev->mode & EEH_MODE_SUPPORTED) && !IS_BRIDGE(edev->class_code))
+ eeh_restore_one_device_bars(edev);
- for_each_child_of_node(pdn->node, dn)
- eeh_restore_bars (PCI_DN(dn));
+ for_each_child_of_node(eeh_dev_to_of_node(edev), dn)
+ eeh_restore_bars(of_node_to_eeh_dev(dn));
}
/**
- * eeh_save_bars - save device bars
+ * eeh_save_bars - Save device bars
+ * @edev: PCI device associated EEH device
*
* Save the values of the device bars. Unlike the restore
* routine, this routine is *not* recursive. This is because
* PCI devices are added individually; but, for the restore,
* an entire slot is reset at a time.
*/
-static void eeh_save_bars(struct pci_dn *pdn)
+static void eeh_save_bars(struct eeh_dev *edev)
{
int i;
+ struct device_node *dn;
- if (!pdn )
+ if (!edev)
return;
+ dn = eeh_dev_to_of_node(edev);
for (i = 0; i < 16; i++)
- rtas_read_config(pdn, i * 4, 4, &pdn->config_space[i]);
-}
-
-void
-rtas_configure_bridge(struct pci_dn *pdn)
-{
- int config_addr;
- int rc;
- int token;
-
- /* Use PE configuration address, if present */
- config_addr = pdn->eeh_config_addr;
- if (pdn->eeh_pe_config_addr)
- config_addr = pdn->eeh_pe_config_addr;
-
- /* Use new configure-pe function, if supported */
- if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE)
- token = ibm_configure_pe;
- else
- token = ibm_configure_bridge;
-
- rc = rtas_call(token, 3, 1, NULL,
- config_addr,
- BUID_HI(pdn->phb->buid),
- BUID_LO(pdn->phb->buid));
- if (rc) {
- printk (KERN_WARNING "EEH: Unable to configure device bridge (%d) for %s\n",
- rc, pdn->node->full_name);
- }
+ eeh_ops->read_config(dn, i * 4, 4, &edev->config_space[i]);
}
-/* ------------------------------------------------------------- */
-/* The code below deals with enabling EEH for devices during the
- * early boot sequence. EEH must be enabled before any PCI probing
- * can be done.
+/**
+ * eeh_early_enable - Early enable EEH on the indicated device
+ * @dn: device node
+ * @data: BUID
+ *
+ * Enable EEH functionality on the specified PCI device. The function
+ * is expected to be called before real PCI probing is done. However,
+ * the PHBs have been initialized at this point.
*/
-
-#define EEH_ENABLE 1
-
-struct eeh_early_enable_info {
- unsigned int buid_hi;
- unsigned int buid_lo;
-};
-
-static int get_pe_addr (int config_addr,
- struct eeh_early_enable_info *info)
+static void *eeh_early_enable(struct device_node *dn, void *data)
{
- unsigned int rets[3];
- int ret;
-
- /* Use latest config-addr token on power6 */
- if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) {
- /* Make sure we have a PE in hand */
- ret = rtas_call (ibm_get_config_addr_info2, 4, 2, rets,
- config_addr, info->buid_hi, info->buid_lo, 1);
- if (ret || (rets[0]==0))
- return 0;
-
- ret = rtas_call (ibm_get_config_addr_info2, 4, 2, rets,
- config_addr, info->buid_hi, info->buid_lo, 0);
- if (ret)
- return 0;
- return rets[0];
- }
-
- /* Use older config-addr token on power5 */
- if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
- ret = rtas_call (ibm_get_config_addr_info, 4, 2, rets,
- config_addr, info->buid_hi, info->buid_lo, 0);
- if (ret)
- return 0;
- return rets[0];
- }
- return 0;
-}
-
-/* Enable eeh for the given device node. */
-static void *early_enable_eeh(struct device_node *dn, void *data)
-{
- unsigned int rets[3];
- struct eeh_early_enable_info *info = data;
int ret;
const u32 *class_code = of_get_property(dn, "class-code", NULL);
const u32 *vendor_id = of_get_property(dn, "vendor-id", NULL);
const u32 *device_id = of_get_property(dn, "device-id", NULL);
const u32 *regs;
int enable;
- struct pci_dn *pdn = PCI_DN(dn);
+ struct eeh_dev *edev = of_node_to_eeh_dev(dn);
- pdn->class_code = 0;
- pdn->eeh_mode = 0;
- pdn->eeh_check_count = 0;
- pdn->eeh_freeze_count = 0;
- pdn->eeh_false_positives = 0;
+ edev->class_code = 0;
+ edev->mode = 0;
+ edev->check_count = 0;
+ edev->freeze_count = 0;
+ edev->false_positives = 0;
if (!of_device_is_available(dn))
return NULL;
@@ -1041,54 +855,56 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
/* There is nothing to check on PCI to ISA bridges */
if (dn->type && !strcmp(dn->type, "isa")) {
- pdn->eeh_mode |= EEH_MODE_NOCHECK;
+ edev->mode |= EEH_MODE_NOCHECK;
return NULL;
}
- pdn->class_code = *class_code;
+ edev->class_code = *class_code;
/* Ok... see if this device supports EEH. Some do, some don't,
- * and the only way to find out is to check each and every one. */
+ * and the only way to find out is to check each and every one.
+ */
regs = of_get_property(dn, "reg", NULL);
if (regs) {
/* First register entry is addr (00BBSS00) */
/* Try to enable eeh */
- ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL,
- regs[0], info->buid_hi, info->buid_lo,
- EEH_ENABLE);
+ ret = eeh_ops->set_option(dn, EEH_OPT_ENABLE);
enable = 0;
if (ret == 0) {
- pdn->eeh_config_addr = regs[0];
+ edev->config_addr = regs[0];
/* If the newer, better, ibm,get-config-addr-info is supported,
- * then use that instead. */
- pdn->eeh_pe_config_addr = get_pe_addr(pdn->eeh_config_addr, info);
+ * then use that instead.
+ */
+ edev->pe_config_addr = eeh_ops->get_pe_addr(dn);
/* Some older systems (Power4) allow the
* ibm,set-eeh-option call to succeed even on nodes
* where EEH is not supported. Verify support
- * explicitly. */
- ret = read_slot_reset_state(pdn, rets);
- if ((ret == 0) && (rets[1] == 1))
+ * explicitly.
+ */
+ ret = eeh_ops->get_state(dn, NULL);
+ if (ret > 0 && ret != EEH_STATE_NOT_SUPPORT)
enable = 1;
}
if (enable) {
eeh_subsystem_enabled = 1;
- pdn->eeh_mode |= EEH_MODE_SUPPORTED;
+ edev->mode |= EEH_MODE_SUPPORTED;
pr_debug("EEH: %s: eeh enabled, config=%x pe_config=%x\n",
- dn->full_name, pdn->eeh_config_addr,
- pdn->eeh_pe_config_addr);
+ dn->full_name, edev->config_addr,
+ edev->pe_config_addr);
} else {
/* This device doesn't support EEH, but it may have an
- * EEH parent, in which case we mark it as supported. */
- if (dn->parent && PCI_DN(dn->parent)
- && (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) {
+ * EEH parent, in which case we mark it as supported.
+ */
+ if (dn->parent && of_node_to_eeh_dev(dn->parent) &&
+ (of_node_to_eeh_dev(dn->parent)->mode & EEH_MODE_SUPPORTED)) {
/* Parent supports EEH. */
- pdn->eeh_mode |= EEH_MODE_SUPPORTED;
- pdn->eeh_config_addr = PCI_DN(dn->parent)->eeh_config_addr;
+ edev->mode |= EEH_MODE_SUPPORTED;
+ edev->config_addr = of_node_to_eeh_dev(dn->parent)->config_addr;
return NULL;
}
}
@@ -1097,11 +913,63 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
dn->full_name);
}
- eeh_save_bars(pdn);
+ eeh_save_bars(edev);
return NULL;
}
-/*
+/**
+ * eeh_ops_register - Register platform dependent EEH operations
+ * @ops: platform dependent EEH operations
+ *
+ * Register the platform dependent EEH operation callback
+ * functions. The platform should call this function before
+ * any other EEH operations.
+ */
+int __init eeh_ops_register(struct eeh_ops *ops)
+{
+ if (!ops->name) {
+ pr_warning("%s: Invalid EEH ops name for %p\n",
+ __func__, ops);
+ return -EINVAL;
+ }
+
+ if (eeh_ops && eeh_ops != ops) {
+ pr_warning("%s: EEH ops of platform %s already existing (%s)\n",
+ __func__, eeh_ops->name, ops->name);
+ return -EEXIST;
+ }
+
+ eeh_ops = ops;
+
+ return 0;
+}
+
+/**
+ * eeh_ops_unregister - Unreigster platform dependent EEH operations
+ * @name: name of EEH platform operations
+ *
+ * Unregister the platform dependent EEH operation callback
+ * functions.
+ */
+int __exit eeh_ops_unregister(const char *name)
+{
+ if (!name || !strlen(name)) {
+ pr_warning("%s: Invalid EEH ops name\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ if (eeh_ops && !strcmp(eeh_ops->name, name)) {
+ eeh_ops = NULL;
+ return 0;
+ }
+
+ return -EEXIST;
+}
+
+/**
+ * eeh_init - EEH initialization
+ *
* Initialize EEH by trying to enable it for all of the adapters in the system.
* As a side effect we can determine here if eeh is supported at all.
* Note that we leave EEH on so failed config cycles won't cause a machine
@@ -1117,50 +985,35 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
void __init eeh_init(void)
{
struct device_node *phb, *np;
- struct eeh_early_enable_info info;
+ int ret;
+
+ /* call platform initialization function */
+ if (!eeh_ops) {
+ pr_warning("%s: Platform EEH operation not found\n",
+ __func__);
+ return;
+ } else if ((ret = eeh_ops->init())) {
+ pr_warning("%s: Failed to call platform init function (%d)\n",
+ __func__, ret);
+ return;
+ }
raw_spin_lock_init(&confirm_error_lock);
- spin_lock_init(&slot_errbuf_lock);
np = of_find_node_by_path("/rtas");
if (np == NULL)
return;
- ibm_set_eeh_option = rtas_token("ibm,set-eeh-option");
- ibm_set_slot_reset = rtas_token("ibm,set-slot-reset");
- ibm_read_slot_reset_state2 = rtas_token("ibm,read-slot-reset-state2");
- ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state");
- ibm_slot_error_detail = rtas_token("ibm,slot-error-detail");
- ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info");
- ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2");
- ibm_configure_bridge = rtas_token ("ibm,configure-bridge");
- ibm_configure_pe = rtas_token("ibm,configure-pe");
-
- if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE)
- return;
-
- eeh_error_buf_size = rtas_token("rtas-error-log-max");
- if (eeh_error_buf_size == RTAS_UNKNOWN_SERVICE) {
- eeh_error_buf_size = 1024;
- }
- if (eeh_error_buf_size > RTAS_ERROR_LOG_MAX) {
- printk(KERN_WARNING "EEH: rtas-error-log-max is bigger than allocated "
- "buffer ! (%d vs %d)", eeh_error_buf_size, RTAS_ERROR_LOG_MAX);
- eeh_error_buf_size = RTAS_ERROR_LOG_MAX;
- }
-
/* Enable EEH for all adapters. Note that eeh requires buid's */
for (phb = of_find_node_by_name(NULL, "pci"); phb;
phb = of_find_node_by_name(phb, "pci")) {
unsigned long buid;
buid = get_phb_buid(phb);
- if (buid == 0 || PCI_DN(phb) == NULL)
+ if (buid == 0 || !of_node_to_eeh_dev(phb))
continue;
- info.buid_lo = BUID_LO(buid);
- info.buid_hi = BUID_HI(buid);
- traverse_pci_devices(phb, early_enable_eeh, &info);
+ traverse_pci_devices(phb, eeh_early_enable, NULL);
}
if (eeh_subsystem_enabled)
@@ -1170,7 +1023,7 @@ void __init eeh_init(void)
}
/**
- * eeh_add_device_early - enable EEH for the indicated device_node
+ * eeh_add_device_early - Enable EEH for the indicated device_node
* @dn: device node for which to set up EEH
*
* This routine must be used to perform EEH initialization for PCI
@@ -1184,21 +1037,26 @@ void __init eeh_init(void)
static void eeh_add_device_early(struct device_node *dn)
{
struct pci_controller *phb;
- struct eeh_early_enable_info info;
- if (!dn || !PCI_DN(dn))
+ if (!dn || !of_node_to_eeh_dev(dn))
return;
- phb = PCI_DN(dn)->phb;
+ phb = of_node_to_eeh_dev(dn)->phb;
/* USB Bus children of PCI devices will not have BUID's */
if (NULL == phb || 0 == phb->buid)
return;
- info.buid_hi = BUID_HI(phb->buid);
- info.buid_lo = BUID_LO(phb->buid);
- early_enable_eeh(dn, &info);
+ eeh_early_enable(dn, NULL);
}
+/**
+ * eeh_add_device_tree_early - Enable EEH for the indicated device
+ * @dn: device node
+ *
+ * This routine must be used to perform EEH initialization for the
+ * indicated PCI device that was added after system boot (e.g.
+ * hotplug, dlpar).
+ */
void eeh_add_device_tree_early(struct device_node *dn)
{
struct device_node *sib;
@@ -1210,7 +1068,7 @@ void eeh_add_device_tree_early(struct device_node *dn)
EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
/**
- * eeh_add_device_late - perform EEH initialization for the indicated pci device
+ * eeh_add_device_late - Perform EEH initialization for the indicated pci device
* @dev: pci device for which to set up EEH
*
* This routine must be used to complete EEH initialization for PCI
@@ -1219,7 +1077,7 @@ EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
static void eeh_add_device_late(struct pci_dev *dev)
{
struct device_node *dn;
- struct pci_dn *pdn;
+ struct eeh_dev *edev;
if (!dev || !eeh_subsystem_enabled)
return;
@@ -1227,20 +1085,29 @@ static void eeh_add_device_late(struct pci_dev *dev)
pr_debug("EEH: Adding device %s\n", pci_name(dev));
dn = pci_device_to_OF_node(dev);
- pdn = PCI_DN(dn);
- if (pdn->pcidev == dev) {
+ edev = pci_dev_to_eeh_dev(dev);
+ if (edev->pdev == dev) {
pr_debug("EEH: Already referenced !\n");
return;
}
- WARN_ON(pdn->pcidev);
+ WARN_ON(edev->pdev);
- pci_dev_get (dev);
- pdn->pcidev = dev;
+ pci_dev_get(dev);
+ edev->pdev = dev;
+ dev->dev.archdata.edev = edev;
pci_addr_cache_insert_device(dev);
eeh_sysfs_add_device(dev);
}
+/**
+ * eeh_add_device_tree_late - Perform EEH initialization for the indicated PCI bus
+ * @bus: PCI bus
+ *
+ * This routine must be used to perform EEH initialization for PCI
+ * devices which are attached to the indicated PCI bus. The PCI bus
+ * is added after system boot through hotplug or dlpar.
+ */
void eeh_add_device_tree_late(struct pci_bus *bus)
{
struct pci_dev *dev;
@@ -1257,7 +1124,7 @@ void eeh_add_device_tree_late(struct pci_bus *bus)
EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
/**
- * eeh_remove_device - undo EEH setup for the indicated pci device
+ * eeh_remove_device - Undo EEH setup for the indicated pci device
* @dev: pci device to be removed
*
* This routine should be called when a device is removed from
@@ -1268,25 +1135,35 @@ EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
*/
static void eeh_remove_device(struct pci_dev *dev)
{
- struct device_node *dn;
+ struct eeh_dev *edev;
+
if (!dev || !eeh_subsystem_enabled)
return;
+ edev = pci_dev_to_eeh_dev(dev);
/* Unregister the device with the EEH/PCI address search system */
pr_debug("EEH: Removing device %s\n", pci_name(dev));
- dn = pci_device_to_OF_node(dev);
- if (PCI_DN(dn)->pcidev == NULL) {
+ if (!edev || !edev->pdev) {
pr_debug("EEH: Not referenced !\n");
return;
}
- PCI_DN(dn)->pcidev = NULL;
- pci_dev_put (dev);
+ edev->pdev = NULL;
+ dev->dev.archdata.edev = NULL;
+ pci_dev_put(dev);
pci_addr_cache_remove_device(dev);
eeh_sysfs_remove_device(dev);
}
+/**
+ * eeh_remove_bus_device - Undo EEH setup for the indicated PCI device
+ * @dev: PCI device
+ *
+ * This routine must be called when a device is removed from the
+ * running system through hotplug or dlpar. The corresponding
+ * PCI address cache will be removed.
+ */
void eeh_remove_bus_device(struct pci_dev *dev)
{
struct pci_bus *bus = dev->subordinate;
@@ -1305,21 +1182,24 @@ static int proc_eeh_show(struct seq_file *m, void *v)
{
if (0 == eeh_subsystem_enabled) {
seq_printf(m, "EEH Subsystem is globally disabled\n");
- seq_printf(m, "eeh_total_mmio_ffs=%ld\n", total_mmio_ffs);
+ seq_printf(m, "eeh_total_mmio_ffs=%llu\n", eeh_stats.total_mmio_ffs);
} else {
seq_printf(m, "EEH Subsystem is enabled\n");
seq_printf(m,
- "no device=%ld\n"
- "no device node=%ld\n"
- "no config address=%ld\n"
- "check not wanted=%ld\n"
- "eeh_total_mmio_ffs=%ld\n"
- "eeh_false_positives=%ld\n"
- "eeh_slot_resets=%ld\n",
- no_device, no_dn, no_cfg_addr,
- ignored_check, total_mmio_ffs,
- false_positives,
- slot_resets);
+ "no device=%llu\n"
+ "no device node=%llu\n"
+ "no config address=%llu\n"
+ "check not wanted=%llu\n"
+ "eeh_total_mmio_ffs=%llu\n"
+ "eeh_false_positives=%llu\n"
+ "eeh_slot_resets=%llu\n",
+ eeh_stats.no_device,
+ eeh_stats.no_dn,
+ eeh_stats.no_cfg_addr,
+ eeh_stats.ignored_check,
+ eeh_stats.total_mmio_ffs,
+ eeh_stats.false_positives,
+ eeh_stats.slot_resets);
}
return 0;