diff options
Diffstat (limited to 'arch/riscv/boot')
-rw-r--r-- | arch/riscv/boot/dts/microchip/mpfs.dtsi | 6 | ||||
-rw-r--r-- | arch/riscv/boot/dts/renesas/r9a07g043f.dtsi | 79 | ||||
-rw-r--r-- | arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi | 16 | ||||
-rw-r--r-- | arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts | 20 | ||||
-rw-r--r-- | arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 9 | ||||
-rw-r--r-- | arch/riscv/boot/dts/sophgo/cv1812h.dtsi | 4 | ||||
-rw-r--r-- | arch/riscv/boot/dts/sophgo/cv18xx.dtsi | 132 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts | 11 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7100-common.dtsi | 108 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts | 22 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7100.dtsi | 45 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi | 71 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110.dtsi | 76 |
13 files changed, 569 insertions, 30 deletions
diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi index 59fd2d4ea523..9883ca3554c5 100644 --- a/arch/riscv/boot/dts/microchip/mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi @@ -243,7 +243,7 @@ }; pdma: dma-controller@3000000 { - compatible = "sifive,fu540-c000-pdma", "sifive,pdma0"; + compatible = "microchip,mpfs-pdma", "sifive,pdma0"; reg = <0x0 0x3000000 0x0 0x8000>; interrupt-parent = <&plic>; interrupts = <5 6>, <7 8>, <9 10>, <11 12>; @@ -422,7 +422,7 @@ can0: can@2010c000 { compatible = "microchip,mpfs-can"; reg = <0x0 0x2010c000 0x0 0x1000>; - clocks = <&clkcfg CLK_CAN0>; + clocks = <&clkcfg CLK_CAN0>, <&clkcfg CLK_MSSPLL3>; interrupt-parent = <&plic>; interrupts = <56>; status = "disabled"; @@ -431,7 +431,7 @@ can1: can@2010d000 { compatible = "microchip,mpfs-can"; reg = <0x0 0x2010d000 0x0 0x1000>; - clocks = <&clkcfg CLK_CAN1>; + clocks = <&clkcfg CLK_CAN1>, <&clkcfg CLK_MSSPLL3>; interrupt-parent = <&plic>; interrupts = <57>; status = "disabled"; diff --git a/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi b/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi index 09ef10b39f46..e0ddf8f602c7 100644 --- a/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi +++ b/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi @@ -27,7 +27,7 @@ riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr", "zifencei", - "zihpm"; + "zihpm", "xandespmu"; mmu-type = "riscv,sv39"; i-cache-size = <0x8000>; i-cache-line-size = <0x40>; @@ -39,7 +39,7 @@ cpu0_intc: interrupt-controller { #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; + compatible = "andestech,cpu-intc", "riscv,cpu-intc"; interrupt-controller; }; }; @@ -54,6 +54,81 @@ dma-noncoherent; interrupt-parent = <&plic>; + irqc: interrupt-controller@110a0000 { + compatible = "renesas,r9a07g043f-irqc"; + reg = <0 0x110a0000 0 0x20000>; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH>, + <33 IRQ_TYPE_LEVEL_HIGH>, + <34 IRQ_TYPE_LEVEL_HIGH>, + <35 IRQ_TYPE_LEVEL_HIGH>, + <36 IRQ_TYPE_LEVEL_HIGH>, + <37 IRQ_TYPE_LEVEL_HIGH>, + <38 IRQ_TYPE_LEVEL_HIGH>, + <39 IRQ_TYPE_LEVEL_HIGH>, + <40 IRQ_TYPE_LEVEL_HIGH>, + <476 IRQ_TYPE_LEVEL_HIGH>, + <477 IRQ_TYPE_LEVEL_HIGH>, + <478 IRQ_TYPE_LEVEL_HIGH>, + <479 IRQ_TYPE_LEVEL_HIGH>, + <480 IRQ_TYPE_LEVEL_HIGH>, + <481 IRQ_TYPE_LEVEL_HIGH>, + <482 IRQ_TYPE_LEVEL_HIGH>, + <483 IRQ_TYPE_LEVEL_HIGH>, + <484 IRQ_TYPE_LEVEL_HIGH>, + <485 IRQ_TYPE_LEVEL_HIGH>, + <486 IRQ_TYPE_LEVEL_HIGH>, + <487 IRQ_TYPE_LEVEL_HIGH>, + <488 IRQ_TYPE_LEVEL_HIGH>, + <489 IRQ_TYPE_LEVEL_HIGH>, + <490 IRQ_TYPE_LEVEL_HIGH>, + <491 IRQ_TYPE_LEVEL_HIGH>, + <492 IRQ_TYPE_LEVEL_HIGH>, + <493 IRQ_TYPE_LEVEL_HIGH>, + <494 IRQ_TYPE_LEVEL_HIGH>, + <495 IRQ_TYPE_LEVEL_HIGH>, + <496 IRQ_TYPE_LEVEL_HIGH>, + <497 IRQ_TYPE_LEVEL_HIGH>, + <498 IRQ_TYPE_LEVEL_HIGH>, + <499 IRQ_TYPE_LEVEL_HIGH>, + <500 IRQ_TYPE_LEVEL_HIGH>, + <501 IRQ_TYPE_LEVEL_HIGH>, + <502 IRQ_TYPE_LEVEL_HIGH>, + <503 IRQ_TYPE_LEVEL_HIGH>, + <504 IRQ_TYPE_LEVEL_HIGH>, + <505 IRQ_TYPE_LEVEL_HIGH>, + <506 IRQ_TYPE_LEVEL_HIGH>, + <507 IRQ_TYPE_LEVEL_HIGH>, + <57 IRQ_TYPE_LEVEL_HIGH>, + <66 IRQ_TYPE_EDGE_RISING>, + <67 IRQ_TYPE_EDGE_RISING>, + <68 IRQ_TYPE_EDGE_RISING>, + <69 IRQ_TYPE_EDGE_RISING>, + <70 IRQ_TYPE_EDGE_RISING>, + <71 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "nmi", + "irq0", "irq1", "irq2", "irq3", + "irq4", "irq5", "irq6", "irq7", + "tint0", "tint1", "tint2", "tint3", + "tint4", "tint5", "tint6", "tint7", + "tint8", "tint9", "tint10", "tint11", + "tint12", "tint13", "tint14", "tint15", + "tint16", "tint17", "tint18", "tint19", + "tint20", "tint21", "tint22", "tint23", + "tint24", "tint25", "tint26", "tint27", + "tint28", "tint29", "tint30", "tint31", + "bus-err", "ec7tie1-0", "ec7tie2-0", + "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1", + "ec7tiovf-1"; + clocks = <&cpg CPG_MOD R9A07G043_IAX45_CLK>, + <&cpg CPG_MOD R9A07G043_IAX45_PCLK>; + clock-names = "clk", "pclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_IAX45_RESETN>; + }; + plic: interrupt-controller@12c00000 { compatible = "renesas,r9a07g043-plic", "andestech,nceplic100"; #interrupt-cells = <2>; diff --git a/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi index 433ab5c6a626..5e808242649e 100644 --- a/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi +++ b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi @@ -6,19 +6,3 @@ */ #include <arm64/renesas/rzg2ul-smarc-som.dtsi> - -#if (!SW_ET0_EN_N) -ð0 { - phy0: ethernet-phy@7 { - /delete-property/ interrupt-parent; - /delete-property/ interrupts; - }; -}; -#endif - -ð1 { - phy1: ethernet-phy@7 { - /delete-property/ interrupt-parent; - /delete-property/ interrupts; - }; -}; diff --git a/arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts b/arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts index 3af9e34b3bc7..cd013588adc0 100644 --- a/arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts +++ b/arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts @@ -23,9 +23,15 @@ stdout-path = "serial0:115200n8"; }; - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x3f40000>; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + coprocessor_rtos: region@83f40000 { + reg = <0x83f40000 0xc0000>; + no-map; + }; }; }; @@ -33,6 +39,14 @@ clock-frequency = <25000000>; }; +&sdhci0 { + status = "okay"; + bus-width = <4>; + no-1-8-v; + no-mmc; + no-sdio; +}; + &uart0 { status = "okay"; }; diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi index 165e9e320a8c..ec9530972ae2 100644 --- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi +++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi @@ -7,6 +7,11 @@ / { compatible = "sophgo,cv1800b"; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x4000000>; + }; }; &plic { @@ -16,3 +21,7 @@ &clint { compatible = "sophgo,cv1800b-clint", "thead,c900-clint"; }; + +&clk { + compatible = "sophgo,cv1800-clk"; +}; diff --git a/arch/riscv/boot/dts/sophgo/cv1812h.dtsi b/arch/riscv/boot/dts/sophgo/cv1812h.dtsi index 3e7a942f5c1a..7fa4c1e2d1da 100644 --- a/arch/riscv/boot/dts/sophgo/cv1812h.dtsi +++ b/arch/riscv/boot/dts/sophgo/cv1812h.dtsi @@ -22,3 +22,7 @@ &clint { compatible = "sophgo,cv1812h-clint", "thead,c900-clint"; }; + +&clk { + compatible = "sophgo,cv1810-clk"; +}; diff --git a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi index 2d6f4a4b1e58..891932ae470f 100644 --- a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi +++ b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi @@ -4,6 +4,8 @@ * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com> */ +#include <dt-bindings/clock/sophgo,cv1800.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -53,6 +55,12 @@ dma-noncoherent; ranges; + clk: clock-controller@3002000 { + reg = <0x03002000 0x1000>; + clocks = <&osc>; + #clock-cells = <1>; + }; + gpio0: gpio@3020000 { compatible = "snps,dw-apb-gpio"; reg = <0x3020000 0x1000>; @@ -125,11 +133,67 @@ }; }; + i2c0: i2c@4000000 { + compatible = "snps,designware-i2c"; + reg = <0x04000000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C0>; + clock-names = "ref", "pclk"; + interrupts = <49 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c1: i2c@4010000 { + compatible = "snps,designware-i2c"; + reg = <0x04010000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C1>; + clock-names = "ref", "pclk"; + interrupts = <50 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c2: i2c@4020000 { + compatible = "snps,designware-i2c"; + reg = <0x04020000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C2>; + clock-names = "ref", "pclk"; + interrupts = <51 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c3: i2c@4030000 { + compatible = "snps,designware-i2c"; + reg = <0x04030000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C3>; + clock-names = "ref", "pclk"; + interrupts = <52 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c4: i2c@4040000 { + compatible = "snps,designware-i2c"; + reg = <0x04040000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C4>; + clock-names = "ref", "pclk"; + interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + uart0: serial@4140000 { compatible = "snps,dw-apb-uart"; reg = <0x04140000 0x100>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc>; + clocks = <&clk CLK_UART0>, <&clk CLK_APB_UART0>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; @@ -139,7 +203,8 @@ compatible = "snps,dw-apb-uart"; reg = <0x04150000 0x100>; interrupts = <45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc>; + clocks = <&clk CLK_UART1>, <&clk CLK_APB_UART1>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; @@ -149,7 +214,8 @@ compatible = "snps,dw-apb-uart"; reg = <0x04160000 0x100>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc>; + clocks = <&clk CLK_UART2>, <&clk CLK_APB_UART2>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; @@ -159,22 +225,78 @@ compatible = "snps,dw-apb-uart"; reg = <0x04170000 0x100>; interrupts = <47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc>; + clocks = <&clk CLK_UART3>, <&clk CLK_APB_UART3>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; }; + spi0: spi@4180000 { + compatible = "snps,dw-apb-ssi"; + reg = <0x04180000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI0>; + clock-names = "ssi_clk", "pclk"; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + spi1: spi@4190000 { + compatible = "snps,dw-apb-ssi"; + reg = <0x04190000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI1>; + clock-names = "ssi_clk", "pclk"; + interrupts = <55 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + spi2: spi@41a0000 { + compatible = "snps,dw-apb-ssi"; + reg = <0x041a0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI2>; + clock-names = "ssi_clk", "pclk"; + interrupts = <56 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + spi3: spi@41b0000 { + compatible = "snps,dw-apb-ssi"; + reg = <0x041b0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI3>; + clock-names = "ssi_clk", "pclk"; + interrupts = <57 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + uart4: serial@41c0000 { compatible = "snps,dw-apb-uart"; reg = <0x041c0000 0x100>; interrupts = <48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc>; + clocks = <&clk CLK_UART4>, <&clk CLK_APB_UART4>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; }; + sdhci0: mmc@4310000 { + compatible = "sophgo,cv1800b-dwcmshc"; + reg = <0x4310000 0x1000>; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk CLK_AXI4_SD0>, + <&clk CLK_SD0>; + clock-names = "core", "bus"; + status = "disabled"; + }; + plic: interrupt-controller@70000000 { reg = <0x70000000 0x4000000>; interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>; diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts index 7cda3a89020a..168f5d9895a9 100644 --- a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts +++ b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts @@ -11,3 +11,14 @@ model = "BeagleV Starlight Beta"; compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100"; }; + +&gmac { + phy-handle = <&phy>; +}; + +&mdio { + phy: ethernet-phy@7 { + reg = <7>; + reset-gpios = <&gpio 63 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi index 42fb61c36068..ae1a6aeb0aea 100644 --- a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi @@ -72,7 +72,91 @@ }; }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; +}; + &gpio { + gmac_pins: gmac-0 { + gtxclk-pins { + pins = <PAD_FUNC_SHARE(115)>; + bias-pull-up; + drive-strength = <35>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + miitxclk-pins { + pins = <PAD_FUNC_SHARE(116)>; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + tx-pins { + pins = <PAD_FUNC_SHARE(117)>, + <PAD_FUNC_SHARE(119)>, + <PAD_FUNC_SHARE(120)>, + <PAD_FUNC_SHARE(121)>, + <PAD_FUNC_SHARE(122)>, + <PAD_FUNC_SHARE(123)>, + <PAD_FUNC_SHARE(124)>, + <PAD_FUNC_SHARE(125)>, + <PAD_FUNC_SHARE(126)>; + bias-pull-up; + drive-strength = <35>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + rxclk-pins { + pins = <PAD_FUNC_SHARE(127)>; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-disable; + slew-rate = <6>; + }; + rxer-pins { + pins = <PAD_FUNC_SHARE(129)>; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + rx-pins { + pins = <PAD_FUNC_SHARE(128)>, + <PAD_FUNC_SHARE(130)>, + <PAD_FUNC_SHARE(131)>, + <PAD_FUNC_SHARE(132)>, + <PAD_FUNC_SHARE(133)>, + <PAD_FUNC_SHARE(134)>, + <PAD_FUNC_SHARE(135)>, + <PAD_FUNC_SHARE(136)>, + <PAD_FUNC_SHARE(137)>, + <PAD_FUNC_SHARE(138)>, + <PAD_FUNC_SHARE(139)>, + <PAD_FUNC_SHARE(140)>, + <PAD_FUNC_SHARE(141)>; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; + i2c0_pins: i2c0-0 { i2c-pins { pinmux = <GPIOMUX(62, GPO_LOW, @@ -115,6 +199,24 @@ }; }; + pwm_pins: pwm-0 { + pwm-pins { + pinmux = <GPIOMUX(7, + GPO_PWM_PAD_OUT_BIT0, + GPO_PWM_PAD_OE_N_BIT0, + GPI_NONE)>, + <GPIOMUX(5, + GPO_PWM_PAD_OUT_BIT1, + GPO_PWM_PAD_OE_N_BIT1, + GPI_NONE)>; + bias-disable; + drive-strength = <35>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + sdio0_pins: sdio0-0 { clk-pins { pinmux = <GPIOMUX(54, GPO_SDIO0_PAD_CCLK_OUT, @@ -257,6 +359,12 @@ clock-frequency = <27000000>; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + &sdio0 { broken-cd; bus-width = <4>; diff --git a/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts index e82af72f1aaf..692c696e1ab4 100644 --- a/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts +++ b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts @@ -6,7 +6,6 @@ /dts-v1/; #include "jh7100-common.dtsi" -#include <dt-bindings/gpio/gpio.h> / { model = "StarFive VisionFive V1"; @@ -18,3 +17,24 @@ priority = <224>; }; }; + +&gmac { + phy-handle = <&phy>; +}; + +/* + * The board uses a Motorcomm YT8521 PHY supporting RGMII-ID, but requires + * manual adjustment of the RX internal delay to work properly. The default + * RX delay provided by the driver (1.95ns) is too high, but applying a 50% + * reduction seems to mitigate the issue. + * + * It is worth noting the adjustment is not necessary on BeagleV Starlight SBC, + * which uses a Microchip PHY. Hence, most likely the Motorcomm PHY is the one + * responsible for the misbehaviour, not the GMAC. + */ +&mdio { + phy: ethernet-phy@0 { + reg = <0>; + rx-internal-delay-ps = <900>; + }; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi index 5d499d8aa804..9a2e9583af88 100644 --- a/arch/riscv/boot/dts/starfive/jh7100.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi @@ -208,6 +208,37 @@ status = "disabled"; }; + gmac: ethernet@10020000 { + compatible = "starfive,jh7100-dwmac", "snps,dwmac"; + reg = <0x0 0x10020000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_GMAC_ROOT_DIV>, + <&clkgen JH7100_CLK_GMAC_AHB>, + <&clkgen JH7100_CLK_GMAC_PTP_REF>, + <&clkgen JH7100_CLK_GMAC_TX_INV>, + <&clkgen JH7100_CLK_GMAC_GTX>; + clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "gtx"; + resets = <&rstgen JH7100_RSTN_GMAC_AHB>; + reset-names = "ahb"; + interrupts = <6>, <7>; + interrupt-names = "macirq", "eth_wake_irq"; + max-frame-size = <9000>; + snps,multicast-filter-bins = <32>; + snps,perfect-filter-entries = <128>; + starfive,syscon = <&sysmain 0x70 0>; + rx-fifo-depth = <32768>; + tx-fifo-depth = <16384>; + snps,axi-config = <&stmmac_axi_setup>; + snps,fixed-burst; + snps,force_thresh_dma_mode; + status = "disabled"; + + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <16>; + snps,rd_osr_lmt = <16>; + snps,blen = <256 128 64 32 0 0 0>; + }; + }; + clkgen: clock-controller@11800000 { compatible = "starfive,jh7100-clkgen"; reg = <0x0 0x11800000 0x0 0x10000>; @@ -222,6 +253,11 @@ #reset-cells = <1>; }; + sysmain: syscon@11850000 { + compatible = "starfive,jh7100-sysmain", "syscon"; + reg = <0x0 0x11850000 0x0 0x10000>; + }; + i2c0: i2c@118b0000 { compatible = "snps,designware-i2c"; reg = <0x0 0x118b0000 0x0 0x10000>; @@ -324,6 +360,15 @@ <&rstgen JH7100_RSTN_WDT>; }; + pwm: pwm@12490000 { + compatible = "starfive,jh7100-pwm", "opencores,pwm-v1"; + reg = <0x0 0x12490000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_PWM_APB>; + resets = <&rstgen JH7100_RSTN_PWM_APB>; + #pwm-cells = <3>; + status = "disabled"; + }; + sfctemp: temperature-sensor@124a0000 { compatible = "starfive,jh7100-temp"; reg = <0x0 0x124a0000 0x0 0x10000>; diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index b89e9791efa7..45b58b6f3df8 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -125,6 +125,55 @@ clock-frequency = <49152000>; }; +&camss { + assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>, + <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>; + assigned-clock-rates = <49500000>, <198000000>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + camss_from_csi2rx: endpoint { + remote-endpoint = <&csi2rx_to_camss>; + }; + }; + }; +}; + +&csi2rx { + assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>; + assigned-clock-rates = <297000000>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + /* remote MIPI sensor endpoint */ + }; + + port@1 { + reg = <1>; + + csi2rx_to_camss: endpoint { + remote-endpoint = <&camss_from_csi2rx>; + }; + }; + }; +}; + &gmac0 { phy-handle = <&phy0>; phy-mode = "rgmii-id"; @@ -323,6 +372,12 @@ }; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + &spi0 { pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; @@ -513,6 +568,22 @@ }; }; + pwm_pins: pwm-0 { + pwm-pins { + pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0, + GPOEN_SYS_PWM0_CHANNEL0, + GPI_NONE)>, + <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1, + GPOEN_SYS_PWM0_CHANNEL1, + GPI_NONE)>; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + spi0_pins: spi0-0 { mosi-pins { pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD, diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi index 74ed3b9264d8..4a5708f7fcf7 100644 --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -829,6 +829,15 @@ status = "disabled"; }; + pwm: pwm@120d0000 { + compatible = "starfive,jh7110-pwm", "opencores,pwm-v1"; + reg = <0x0 0x120d0000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_PWM_APB>; + resets = <&syscrg JH7110_SYSRST_PWM_APB>; + #pwm-cells = <3>; + status = "disabled"; + }; + sfctemp: temperature-sensor@120e0000 { compatible = "starfive,jh7110-temp"; reg = <0x0 0x120e0000 0x0 0x10000>; @@ -1104,6 +1113,32 @@ #power-domain-cells = <1>; }; + csi2rx: csi@19800000 { + compatible = "starfive,jh7110-csi2rx", "cdns,csi2rx"; + reg = <0x0 0x19800000 0x0 0x10000>; + clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>, + <&ispcrg JH7110_ISPCLK_VIN_APB>, + <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF0>, + <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF1>, + <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF2>, + <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF3>; + clock-names = "sys_clk", "p_clk", + "pixel_if0_clk", "pixel_if1_clk", + "pixel_if2_clk", "pixel_if3_clk"; + resets = <&ispcrg JH7110_ISPRST_VIN_SYS>, + <&ispcrg JH7110_ISPRST_VIN_APB>, + <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF0>, + <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF1>, + <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF2>, + <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF3>; + reset-names = "sys", "reg_bank", + "pixel_if0", "pixel_if1", + "pixel_if2", "pixel_if3"; + phys = <&csi_phy>; + phy-names = "dphy"; + status = "disabled"; + }; + ispcrg: clock-controller@19810000 { compatible = "starfive,jh7110-ispcrg"; reg = <0x0 0x19810000 0x0 0x10000>; @@ -1121,6 +1156,47 @@ power-domains = <&pwrc JH7110_PD_ISP>; }; + csi_phy: phy@19820000 { + compatible = "starfive,jh7110-dphy-rx"; + reg = <0x0 0x19820000 0x0 0x10000>; + clocks = <&ispcrg JH7110_ISPCLK_M31DPHY_CFG_IN>, + <&ispcrg JH7110_ISPCLK_M31DPHY_REF_IN>, + <&ispcrg JH7110_ISPCLK_M31DPHY_TX_ESC_LAN0>; + clock-names = "cfg", "ref", "tx"; + resets = <&ispcrg JH7110_ISPRST_M31DPHY_HW>, + <&ispcrg JH7110_ISPRST_M31DPHY_B09_AON>; + power-domains = <&aon_syscon JH7110_AON_PD_DPHY_RX>; + #phy-cells = <0>; + }; + + camss: isp@19840000 { + compatible = "starfive,jh7110-camss"; + reg = <0x0 0x19840000 0x0 0x10000>, + <0x0 0x19870000 0x0 0x30000>; + reg-names = "syscon", "isp"; + clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>, + <&ispcrg JH7110_ISPCLK_ISPV2_TOP_WRAPPER_C>, + <&ispcrg JH7110_ISPCLK_DVP_INV>, + <&ispcrg JH7110_ISPCLK_VIN_P_AXI_WR>, + <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>, + <&syscrg JH7110_SYSCLK_ISP_TOP_CORE>, + <&syscrg JH7110_SYSCLK_ISP_TOP_AXI>; + clock-names = "apb_func", "wrapper_clk_c", "dvp_inv", + "axiwr", "mipi_rx0_pxl", "ispcore_2x", + "isp_axi"; + resets = <&ispcrg JH7110_ISPRST_ISPV2_TOP_WRAPPER_P>, + <&ispcrg JH7110_ISPRST_ISPV2_TOP_WRAPPER_C>, + <&ispcrg JH7110_ISPRST_VIN_P_AXI_RD>, + <&ispcrg JH7110_ISPRST_VIN_P_AXI_WR>, + <&syscrg JH7110_SYSRST_ISP_TOP>, + <&syscrg JH7110_SYSRST_ISP_TOP_AXI>; + reset-names = "wrapper_p", "wrapper_c", "axird", + "axiwr", "isp_top_n", "isp_top_axi"; + power-domains = <&pwrc JH7110_PD_ISP>; + interrupts = <92>, <87>, <90>, <88>; + status = "disabled"; + }; + voutcrg: clock-controller@295c0000 { compatible = "starfive,jh7110-voutcrg"; reg = <0x0 0x295c0000 0x0 0x10000>; |