summaryrefslogtreecommitdiff
path: root/arch/x86/boot
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/boot')
-rw-r--r--arch/x86/boot/Makefile2
-rw-r--r--arch/x86/boot/compressed/Makefile10
-rw-r--r--arch/x86/boot/compressed/efi_mixed.S345
-rw-r--r--arch/x86/boot/compressed/efi_thunk_64.S195
-rw-r--r--arch/x86/boot/compressed/head_32.S4
-rw-r--r--arch/x86/boot/compressed/head_64.S311
-rw-r--r--arch/x86/boot/compressed/kaslr.c2
-rw-r--r--arch/x86/boot/compressed/mem_encrypt.S152
-rw-r--r--arch/x86/boot/cpuflags.c15
-rw-r--r--arch/x86/boot/header.S5
-rw-r--r--arch/x86/boot/string.c2
-rw-r--r--arch/x86/boot/tools/build.c2
12 files changed, 526 insertions, 519 deletions
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 9860ca5979f8..9e38ffaadb5d 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -83,7 +83,7 @@ cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin \
$(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE
$(call if_changed,image)
- @$(kecho) 'Kernel: $@ is ready' ' (#'`cat .version`')'
+ @$(kecho) 'Kernel: $@ is ready' ' (#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note -R .comment -S
$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 3a261abb6d15..1acff356d97a 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -68,7 +68,7 @@ KBUILD_LDFLAGS += $(call ld-option,--no-ld-generated-unwind-info)
# address by the bootloader.
LDFLAGS_vmlinux := -pie $(call ld-option, --no-dynamic-linker)
ifdef CONFIG_LD_ORPHAN_WARN
-LDFLAGS_vmlinux += --orphan-handling=warn
+LDFLAGS_vmlinux += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
endif
LDFLAGS_vmlinux += -z noexecstack
ifeq ($(CONFIG_LD_IS_BFD),y)
@@ -100,7 +100,7 @@ vmlinux-objs-$(CONFIG_RANDOMIZE_BASE) += $(obj)/kaslr.o
ifdef CONFIG_X86_64
vmlinux-objs-y += $(obj)/ident_map_64.o
vmlinux-objs-y += $(obj)/idt_64.o $(obj)/idt_handlers_64.o
- vmlinux-objs-y += $(obj)/mem_encrypt.o
+ vmlinux-objs-$(CONFIG_AMD_MEM_ENCRYPT) += $(obj)/mem_encrypt.o
vmlinux-objs-y += $(obj)/pgtable_64.o
vmlinux-objs-$(CONFIG_AMD_MEM_ENCRYPT) += $(obj)/sev.o
endif
@@ -108,11 +108,11 @@ endif
vmlinux-objs-$(CONFIG_ACPI) += $(obj)/acpi.o
vmlinux-objs-$(CONFIG_INTEL_TDX_GUEST) += $(obj)/tdx.o $(obj)/tdcall.o
-vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_thunk_$(BITS).o
vmlinux-objs-$(CONFIG_EFI) += $(obj)/efi.o
-efi-obj-$(CONFIG_EFI_STUB) = $(objtree)/drivers/firmware/efi/libstub/lib.a
+vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_mixed.o
+vmlinux-objs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
-$(obj)/vmlinux: $(vmlinux-objs-y) $(efi-obj-y) FORCE
+$(obj)/vmlinux: $(vmlinux-objs-y) FORCE
$(call if_changed,ld)
OBJCOPYFLAGS_vmlinux.bin := -R .comment -S
diff --git a/arch/x86/boot/compressed/efi_mixed.S b/arch/x86/boot/compressed/efi_mixed.S
new file mode 100644
index 000000000000..4ca70bf93dc0
--- /dev/null
+++ b/arch/x86/boot/compressed/efi_mixed.S
@@ -0,0 +1,345 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2014, 2015 Intel Corporation; author Matt Fleming
+ *
+ * Early support for invoking 32-bit EFI services from a 64-bit kernel.
+ *
+ * Because this thunking occurs before ExitBootServices() we have to
+ * restore the firmware's 32-bit GDT and IDT before we make EFI service
+ * calls.
+ *
+ * On the plus side, we don't have to worry about mangling 64-bit
+ * addresses into 32-bits because we're executing with an identity
+ * mapped pagetable and haven't transitioned to 64-bit virtual addresses
+ * yet.
+ */
+
+#include <linux/linkage.h>
+#include <asm/msr.h>
+#include <asm/page_types.h>
+#include <asm/processor-flags.h>
+#include <asm/segment.h>
+
+ .code64
+ .text
+/*
+ * When booting in 64-bit mode on 32-bit EFI firmware, startup_64_mixed_mode()
+ * is the first thing that runs after switching to long mode. Depending on
+ * whether the EFI handover protocol or the compat entry point was used to
+ * enter the kernel, it will either branch to the 64-bit EFI handover
+ * entrypoint at offset 0x390 in the image, or to the 64-bit EFI PE/COFF
+ * entrypoint efi_pe_entry(). In the former case, the bootloader must provide a
+ * struct bootparams pointer as the third argument, so the presence of such a
+ * pointer is used to disambiguate.
+ *
+ * +--------------+
+ * +------------------+ +------------+ +------>| efi_pe_entry |
+ * | efi32_pe_entry |---->| | | +-----------+--+
+ * +------------------+ | | +------+----------------+ |
+ * | startup_32 |---->| startup_64_mixed_mode | |
+ * +------------------+ | | +------+----------------+ V
+ * | efi32_stub_entry |---->| | | +------------------+
+ * +------------------+ +------------+ +---->| efi64_stub_entry |
+ * +-------------+----+
+ * +------------+ +----------+ |
+ * | startup_64 |<----| efi_main |<--------------+
+ * +------------+ +----------+
+ */
+SYM_FUNC_START(startup_64_mixed_mode)
+ lea efi32_boot_args(%rip), %rdx
+ mov 0(%rdx), %edi
+ mov 4(%rdx), %esi
+ mov 8(%rdx), %edx // saved bootparams pointer
+ test %edx, %edx
+ jnz efi64_stub_entry
+ /*
+ * efi_pe_entry uses MS calling convention, which requires 32 bytes of
+ * shadow space on the stack even if all arguments are passed in
+ * registers. We also need an additional 8 bytes for the space that
+ * would be occupied by the return address, and this also results in
+ * the correct stack alignment for entry.
+ */
+ sub $40, %rsp
+ mov %rdi, %rcx // MS calling convention
+ mov %rsi, %rdx
+ jmp efi_pe_entry
+SYM_FUNC_END(startup_64_mixed_mode)
+
+SYM_FUNC_START(__efi64_thunk)
+ push %rbp
+ push %rbx
+
+ movl %ds, %eax
+ push %rax
+ movl %es, %eax
+ push %rax
+ movl %ss, %eax
+ push %rax
+
+ /* Copy args passed on stack */
+ movq 0x30(%rsp), %rbp
+ movq 0x38(%rsp), %rbx
+ movq 0x40(%rsp), %rax
+
+ /*
+ * Convert x86-64 ABI params to i386 ABI
+ */
+ subq $64, %rsp
+ movl %esi, 0x0(%rsp)
+ movl %edx, 0x4(%rsp)
+ movl %ecx, 0x8(%rsp)
+ movl %r8d, 0xc(%rsp)
+ movl %r9d, 0x10(%rsp)
+ movl %ebp, 0x14(%rsp)
+ movl %ebx, 0x18(%rsp)
+ movl %eax, 0x1c(%rsp)
+
+ leaq 0x20(%rsp), %rbx
+ sgdt (%rbx)
+ sidt 16(%rbx)
+
+ leaq 1f(%rip), %rbp
+
+ /*
+ * Switch to IDT and GDT with 32-bit segments. These are the firmware
+ * GDT and IDT that were installed when the kernel started executing.
+ * The pointers were saved by the efi32_entry() routine below.
+ *
+ * Pass the saved DS selector to the 32-bit code, and use far return to
+ * restore the saved CS selector.
+ */
+ lidt efi32_boot_idt(%rip)
+ lgdt efi32_boot_gdt(%rip)
+
+ movzwl efi32_boot_ds(%rip), %edx
+ movzwq efi32_boot_cs(%rip), %rax
+ pushq %rax
+ leaq efi_enter32(%rip), %rax
+ pushq %rax
+ lretq
+
+1: addq $64, %rsp
+ movq %rdi, %rax
+
+ pop %rbx
+ movl %ebx, %ss
+ pop %rbx
+ movl %ebx, %es
+ pop %rbx
+ movl %ebx, %ds
+ /* Clear out 32-bit selector from FS and GS */
+ xorl %ebx, %ebx
+ movl %ebx, %fs
+ movl %ebx, %gs
+
+ pop %rbx
+ pop %rbp
+ RET
+SYM_FUNC_END(__efi64_thunk)
+
+ .code32
+/*
+ * EFI service pointer must be in %edi.
+ *
+ * The stack should represent the 32-bit calling convention.
+ */
+SYM_FUNC_START_LOCAL(efi_enter32)
+ /* Load firmware selector into data and stack segment registers */
+ movl %edx, %ds
+ movl %edx, %es
+ movl %edx, %fs
+ movl %edx, %gs
+ movl %edx, %ss
+
+ /* Reload pgtables */
+ movl %cr3, %eax
+ movl %eax, %cr3
+
+ /* Disable paging */
+ movl %cr0, %eax
+ btrl $X86_CR0_PG_BIT, %eax
+ movl %eax, %cr0
+
+ /* Disable long mode via EFER */
+ movl $MSR_EFER, %ecx
+ rdmsr
+ btrl $_EFER_LME, %eax
+ wrmsr
+
+ call *%edi
+
+ /* We must preserve return value */
+ movl %eax, %edi
+
+ /*
+ * Some firmware will return with interrupts enabled. Be sure to
+ * disable them before we switch GDTs and IDTs.
+ */
+ cli
+
+ lidtl 16(%ebx)
+ lgdtl (%ebx)
+
+ movl %cr4, %eax
+ btsl $(X86_CR4_PAE_BIT), %eax
+ movl %eax, %cr4
+
+ movl %cr3, %eax
+ movl %eax, %cr3
+
+ movl $MSR_EFER, %ecx
+ rdmsr
+ btsl $_EFER_LME, %eax
+ wrmsr
+
+ xorl %eax, %eax
+ lldt %ax
+
+ pushl $__KERNEL_CS
+ pushl %ebp
+
+ /* Enable paging */
+ movl %cr0, %eax
+ btsl $X86_CR0_PG_BIT, %eax
+ movl %eax, %cr0
+ lret
+SYM_FUNC_END(efi_enter32)
+
+/*
+ * This is the common EFI stub entry point for mixed mode.
+ *
+ * Arguments: %ecx image handle
+ * %edx EFI system table pointer
+ * %esi struct bootparams pointer (or NULL when not using
+ * the EFI handover protocol)
+ *
+ * Since this is the point of no return for ordinary execution, no registers
+ * are considered live except for the function parameters. [Note that the EFI
+ * stub may still exit and return to the firmware using the Exit() EFI boot
+ * service.]
+ */
+SYM_FUNC_START(efi32_entry)
+ call 1f
+1: pop %ebx
+
+ /* Save firmware GDTR and code/data selectors */
+ sgdtl (efi32_boot_gdt - 1b)(%ebx)
+ movw %cs, (efi32_boot_cs - 1b)(%ebx)
+ movw %ds, (efi32_boot_ds - 1b)(%ebx)
+
+ /* Store firmware IDT descriptor */
+ sidtl (efi32_boot_idt - 1b)(%ebx)
+
+ /* Store boot arguments */
+ leal (efi32_boot_args - 1b)(%ebx), %ebx
+ movl %ecx, 0(%ebx)
+ movl %edx, 4(%ebx)
+ movl %esi, 8(%ebx)
+ movb $0x0, 12(%ebx) // efi_is64
+
+ /* Disable paging */
+ movl %cr0, %eax
+ btrl $X86_CR0_PG_BIT, %eax
+ movl %eax, %cr0
+
+ jmp startup_32
+SYM_FUNC_END(efi32_entry)
+
+#define ST32_boottime 60 // offsetof(efi_system_table_32_t, boottime)
+#define BS32_handle_protocol 88 // offsetof(efi_boot_services_32_t, handle_protocol)
+#define LI32_image_base 32 // offsetof(efi_loaded_image_32_t, image_base)
+
+/*
+ * efi_status_t efi32_pe_entry(efi_handle_t image_handle,
+ * efi_system_table_32_t *sys_table)
+ */
+SYM_FUNC_START(efi32_pe_entry)
+ pushl %ebp
+ movl %esp, %ebp
+ pushl %eax // dummy push to allocate loaded_image
+
+ pushl %ebx // save callee-save registers
+ pushl %edi
+
+ call verify_cpu // check for long mode support
+ testl %eax, %eax
+ movl $0x80000003, %eax // EFI_UNSUPPORTED
+ jnz 2f
+
+ call 1f
+1: pop %ebx
+
+ /* Get the loaded image protocol pointer from the image handle */
+ leal -4(%ebp), %eax
+ pushl %eax // &loaded_image
+ leal (loaded_image_proto - 1b)(%ebx), %eax
+ pushl %eax // pass the GUID address
+ pushl 8(%ebp) // pass the image handle
+
+ /*
+ * Note the alignment of the stack frame.
+ * sys_table
+ * handle <-- 16-byte aligned on entry by ABI
+ * return address
+ * frame pointer
+ * loaded_image <-- local variable
+ * saved %ebx <-- 16-byte aligned here
+ * saved %edi
+ * &loaded_image
+ * &loaded_image_proto
+ * handle <-- 16-byte aligned for call to handle_protocol
+ */
+
+ movl 12(%ebp), %eax // sys_table
+ movl ST32_boottime(%eax), %eax // sys_table->boottime
+ call *BS32_handle_protocol(%eax) // sys_table->boottime->handle_protocol
+ addl $12, %esp // restore argument space
+ testl %eax, %eax
+ jnz 2f
+
+ movl 8(%ebp), %ecx // image_handle
+ movl 12(%ebp), %edx // sys_table
+ movl -4(%ebp), %esi // loaded_image
+ movl LI32_image_base(%esi), %esi // loaded_image->image_base
+ leal (startup_32 - 1b)(%ebx), %ebp // runtime address of startup_32
+ /*
+ * We need to set the image_offset variable here since startup_32() will
+ * use it before we get to the 64-bit efi_pe_entry() in C code.
+ */
+ subl %esi, %ebp // calculate image_offset
+ movl %ebp, (image_offset - 1b)(%ebx) // save image_offset
+ xorl %esi, %esi
+ jmp efi32_entry // pass %ecx, %edx, %esi
+ // no other registers remain live
+
+2: popl %edi // restore callee-save registers
+ popl %ebx
+ leave
+ RET
+SYM_FUNC_END(efi32_pe_entry)
+
+ .section ".rodata"
+ /* EFI loaded image protocol GUID */
+ .balign 4
+SYM_DATA_START_LOCAL(loaded_image_proto)
+ .long 0x5b1b31a1
+ .word 0x9562, 0x11d2
+ .byte 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b
+SYM_DATA_END(loaded_image_proto)
+
+ .data
+ .balign 8
+SYM_DATA_START_LOCAL(efi32_boot_gdt)
+ .word 0
+ .quad 0
+SYM_DATA_END(efi32_boot_gdt)
+
+SYM_DATA_START_LOCAL(efi32_boot_idt)
+ .word 0
+ .quad 0
+SYM_DATA_END(efi32_boot_idt)
+
+SYM_DATA_LOCAL(efi32_boot_cs, .word 0)
+SYM_DATA_LOCAL(efi32_boot_ds, .word 0)
+SYM_DATA_LOCAL(efi32_boot_args, .long 0, 0, 0)
+SYM_DATA(efi_is64, .byte 1)
diff --git a/arch/x86/boot/compressed/efi_thunk_64.S b/arch/x86/boot/compressed/efi_thunk_64.S
deleted file mode 100644
index 67e7edcdfea8..000000000000
--- a/arch/x86/boot/compressed/efi_thunk_64.S
+++ /dev/null
@@ -1,195 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2014, 2015 Intel Corporation; author Matt Fleming
- *
- * Early support for invoking 32-bit EFI services from a 64-bit kernel.
- *
- * Because this thunking occurs before ExitBootServices() we have to
- * restore the firmware's 32-bit GDT and IDT before we make EFI service
- * calls.
- *
- * On the plus side, we don't have to worry about mangling 64-bit
- * addresses into 32-bits because we're executing with an identity
- * mapped pagetable and haven't transitioned to 64-bit virtual addresses
- * yet.
- */
-
-#include <linux/linkage.h>
-#include <asm/msr.h>
-#include <asm/page_types.h>
-#include <asm/processor-flags.h>
-#include <asm/segment.h>
-
- .code64
- .text
-SYM_FUNC_START(__efi64_thunk)
- push %rbp
- push %rbx
-
- movl %ds, %eax
- push %rax
- movl %es, %eax
- push %rax
- movl %ss, %eax
- push %rax
-
- /* Copy args passed on stack */
- movq 0x30(%rsp), %rbp
- movq 0x38(%rsp), %rbx
- movq 0x40(%rsp), %rax
-
- /*
- * Convert x86-64 ABI params to i386 ABI
- */
- subq $64, %rsp
- movl %esi, 0x0(%rsp)
- movl %edx, 0x4(%rsp)
- movl %ecx, 0x8(%rsp)
- movl %r8d, 0xc(%rsp)
- movl %r9d, 0x10(%rsp)
- movl %ebp, 0x14(%rsp)
- movl %ebx, 0x18(%rsp)
- movl %eax, 0x1c(%rsp)
-
- leaq 0x20(%rsp), %rbx
- sgdt (%rbx)
-
- addq $16, %rbx
- sidt (%rbx)
-
- leaq 1f(%rip), %rbp
-
- /*
- * Switch to IDT and GDT with 32-bit segments. This is the firmware GDT
- * and IDT that was installed when the kernel started executing. The
- * pointers were saved at the EFI stub entry point in head_64.S.
- *
- * Pass the saved DS selector to the 32-bit code, and use far return to
- * restore the saved CS selector.
- */
- leaq efi32_boot_idt(%rip), %rax
- lidt (%rax)
- leaq efi32_boot_gdt(%rip), %rax
- lgdt (%rax)
-
- movzwl efi32_boot_ds(%rip), %edx
- movzwq efi32_boot_cs(%rip), %rax
- pushq %rax
- leaq efi_enter32(%rip), %rax
- pushq %rax
- lretq
-
-1: addq $64, %rsp
- movq %rdi, %rax
-
- pop %rbx
- movl %ebx, %ss
- pop %rbx
- movl %ebx, %es
- pop %rbx
- movl %ebx, %ds
- /* Clear out 32-bit selector from FS and GS */
- xorl %ebx, %ebx
- movl %ebx, %fs
- movl %ebx, %gs
-
- /*
- * Convert 32-bit status code into 64-bit.
- */
- roll $1, %eax
- rorq $1, %rax
-
- pop %rbx
- pop %rbp
- RET
-SYM_FUNC_END(__efi64_thunk)
-
- .code32
-/*
- * EFI service pointer must be in %edi.
- *
- * The stack should represent the 32-bit calling convention.
- */
-SYM_FUNC_START_LOCAL(efi_enter32)
- /* Load firmware selector into data and stack segment registers */
- movl %edx, %ds
- movl %edx, %es
- movl %edx, %fs
- movl %edx, %gs
- movl %edx, %ss
-
- /* Reload pgtables */
- movl %cr3, %eax
- movl %eax, %cr3
-
- /* Disable paging */
- movl %cr0, %eax
- btrl $X86_CR0_PG_BIT, %eax
- movl %eax, %cr0
-
- /* Disable long mode via EFER */
- movl $MSR_EFER, %ecx
- rdmsr
- btrl $_EFER_LME, %eax
- wrmsr
-
- call *%edi
-
- /* We must preserve return value */
- movl %eax, %edi
-
- /*
- * Some firmware will return with interrupts enabled. Be sure to
- * disable them before we switch GDTs and IDTs.
- */
- cli
-
- lidtl (%ebx)
- subl $16, %ebx
-
- lgdtl (%ebx)
-
- movl %cr4, %eax
- btsl $(X86_CR4_PAE_BIT), %eax
- movl %eax, %cr4
-
- movl %cr3, %eax
- movl %eax, %cr3
-
- movl $MSR_EFER, %ecx
- rdmsr
- btsl $_EFER_LME, %eax
- wrmsr
-
- xorl %eax, %eax
- lldt %ax
-
- pushl $__KERNEL_CS
- pushl %ebp
-
- /* Enable paging */
- movl %cr0, %eax
- btsl $X86_CR0_PG_BIT, %eax
- movl %eax, %cr0
- lret
-SYM_FUNC_END(efi_enter32)
-
- .data
- .balign 8
-SYM_DATA_START(efi32_boot_gdt)
- .word 0
- .quad 0
-SYM_DATA_END(efi32_boot_gdt)
-
-SYM_DATA_START(efi32_boot_idt)
- .word 0
- .quad 0
-SYM_DATA_END(efi32_boot_idt)
-
-SYM_DATA_START(efi32_boot_cs)
- .word 0
-SYM_DATA_END(efi32_boot_cs)
-
-SYM_DATA_START(efi32_boot_ds)
- .word 0
-SYM_DATA_END(efi32_boot_ds)
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 3b354eb9516d..6589ddd4cfaf 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -208,10 +208,6 @@ SYM_DATA_START_LOCAL(gdt)
.quad 0x00cf92000000ffff /* __KERNEL_DS */
SYM_DATA_END_LABEL(gdt, SYM_L_LOCAL, gdt_end)
-#ifdef CONFIG_EFI_STUB
-SYM_DATA(image_offset, .long 0)
-#endif
-
/*
* Stack and heap for uncompression
*/
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index d33f060900d2..a75712991df3 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -38,6 +38,14 @@
#include "pgtable.h"
/*
+ * Fix alignment at 16 bytes. Following CONFIG_FUNCTION_ALIGNMENT will result
+ * in assembly errors due to trying to move .org backward due to the excessive
+ * alignment.
+ */
+#undef __ALIGN
+#define __ALIGN .balign 16, 0x90
+
+/*
* Locally defined symbols should be marked hidden:
*/
.hidden _bss
@@ -118,7 +126,9 @@ SYM_FUNC_START(startup_32)
1:
/* Setup Exception handling for SEV-ES */
+#ifdef CONFIG_AMD_MEM_ENCRYPT
call startup32_load_idt
+#endif
/* Make sure cpu supports long mode. */
call verify_cpu
@@ -178,12 +188,13 @@ SYM_FUNC_START(startup_32)
*/
/*
* If SEV is active then set the encryption mask in the page tables.
- * This will insure that when the kernel is copied and decompressed
+ * This will ensure that when the kernel is copied and decompressed
* it will be done so encrypted.
*/
- call get_sev_encryption_bit
xorl %edx, %edx
#ifdef CONFIG_AMD_MEM_ENCRYPT
+ call get_sev_encryption_bit
+ xorl %edx, %edx
testl %eax, %eax
jz 1f
subl $32, %eax /* Encryption bit is always above bit 31 */
@@ -249,6 +260,11 @@ SYM_FUNC_START(startup_32)
movl $__BOOT_TSS, %eax
ltr %ax
+#ifdef CONFIG_AMD_MEM_ENCRYPT
+ /* Check if the C-bit position is correct when SEV is active */
+ call startup32_check_sev_cbit
+#endif
+
/*
* Setup for the jump to 64bit mode
*
@@ -261,29 +277,11 @@ SYM_FUNC_START(startup_32)
*/
leal rva(startup_64)(%ebp), %eax
#ifdef CONFIG_EFI_MIXED
- movl rva(efi32_boot_args)(%ebp), %edi
- testl %edi, %edi
- jz 1f
- leal rva(efi64_stub_entry)(%ebp), %eax
- movl rva(efi32_boot_args+4)(%ebp), %esi
- movl rva(efi32_boot_args+8)(%ebp), %edx // saved bootparams pointer
- testl %edx, %edx
- jnz 1f
- /*
- * efi_pe_entry uses MS calling convention, which requires 32 bytes of
- * shadow space on the stack even if all arguments are passed in
- * registers. We also need an additional 8 bytes for the space that
- * would be occupied by the return address, and this also results in
- * the correct stack alignment for entry.
- */
- subl $40, %esp
- leal rva(efi_pe_entry)(%ebp), %eax
- movl %edi, %ecx // MS calling convention
- movl %esi, %edx
+ cmpb $1, rva(efi_is64)(%ebp)
+ je 1f
+ leal rva(startup_64_mixed_mode)(%ebp), %eax
1:
#endif
- /* Check if the C-bit position is correct when SEV is active */
- call startup32_check_sev_cbit
pushl $__KERNEL_CS
pushl %eax
@@ -296,38 +294,14 @@ SYM_FUNC_START(startup_32)
lret
SYM_FUNC_END(startup_32)
-#ifdef CONFIG_EFI_MIXED
+#if IS_ENABLED(CONFIG_EFI_MIXED) && IS_ENABLED(CONFIG_EFI_HANDOVER_PROTOCOL)
.org 0x190
SYM_FUNC_START(efi32_stub_entry)
add $0x4, %esp /* Discard return address */
popl %ecx
popl %edx
popl %esi
-
- call 1f
-1: pop %ebp
- subl $ rva(1b), %ebp
-
- movl %esi, rva(efi32_boot_args+8)(%ebp)
-SYM_INNER_LABEL(efi32_pe_stub_entry, SYM_L_LOCAL)
- movl %ecx, rva(efi32_boot_args)(%ebp)
- movl %edx, rva(efi32_boot_args+4)(%ebp)
- movb $0, rva(efi_is64)(%ebp)
-
- /* Save firmware GDTR and code/data selectors */
- sgdtl rva(efi32_boot_gdt)(%ebp)
- movw %cs, rva(efi32_boot_cs)(%ebp)
- movw %ds, rva(efi32_boot_ds)(%ebp)
-
- /* Store firmware IDT descriptor */
- sidtl rva(efi32_boot_idt)(%ebp)
-
- /* Disable paging */
- movl %cr0, %eax
- btrl $X86_CR0_PG_BIT, %eax
- movl %eax, %cr0
-
- jmp startup_32
+ jmp efi32_entry
SYM_FUNC_END(efi32_stub_entry)
#endif
@@ -550,7 +524,9 @@ trampoline_return:
SYM_CODE_END(startup_64)
#ifdef CONFIG_EFI_STUB
+#ifdef CONFIG_EFI_HANDOVER_PROTOCOL
.org 0x390
+#endif
SYM_FUNC_START(efi64_stub_entry)
and $~0xf, %rsp /* realign the stack */
movq %rdx, %rbx /* save boot_params pointer */
@@ -713,6 +689,7 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lno_longmode)
jmp 1b
SYM_FUNC_END(.Lno_longmode)
+ .globl verify_cpu
#include "../../kernel/verify_cpu.S"
.data
@@ -744,242 +721,6 @@ SYM_DATA_START(boot_idt)
.endr
SYM_DATA_END_LABEL(boot_idt, SYM_L_GLOBAL, boot_idt_end)
-#ifdef CONFIG_AMD_MEM_ENCRYPT
-SYM_DATA_START(boot32_idt_desc)
- .word boot32_idt_end - boot32_idt - 1
- .long 0
-SYM_DATA_END(boot32_idt_desc)
- .balign 8
-SYM_DATA_START(boot32_idt)
- .rept 32
- .quad 0
- .endr
-SYM_DATA_END_LABEL(boot32_idt, SYM_L_GLOBAL, boot32_idt_end)
-#endif
-
-#ifdef CONFIG_EFI_STUB
-SYM_DATA(image_offset, .long 0)
-#endif
-#ifdef CONFIG_EFI_MIXED
-SYM_DATA_LOCAL(efi32_boot_args, .long 0, 0, 0)
-SYM_DATA(efi_is64, .byte 1)
-
-#define ST32_boottime 60 // offsetof(efi_system_table_32_t, boottime)
-#define BS32_handle_protocol 88 // offsetof(efi_boot_services_32_t, handle_protocol)
-#define LI32_image_base 32 // offsetof(efi_loaded_image_32_t, image_base)
-
- __HEAD
- .code32
-SYM_FUNC_START(efi32_pe_entry)
-/*
- * efi_status_t efi32_pe_entry(efi_handle_t image_handle,
- * efi_system_table_32_t *sys_table)
- */
-
- pushl %ebp
- movl %esp, %ebp
- pushl %eax // dummy push to allocate loaded_image
-
- pushl %ebx // save callee-save registers
- pushl %edi
-
- call verify_cpu // check for long mode support
- testl %eax, %eax
- movl $0x80000003, %eax // EFI_UNSUPPORTED
- jnz 2f
-
- call 1f
-1: pop %ebx
- subl $ rva(1b), %ebx
-
- /* Get the loaded image protocol pointer from the image handle */
- leal -4(%ebp), %eax
- pushl %eax // &loaded_image
- leal rva(loaded_image_proto)(%ebx), %eax
- pushl %eax // pass the GUID address
- pushl 8(%ebp) // pass the image handle
-
- /*
- * Note the alignment of the stack frame.
- * sys_table
- * handle <-- 16-byte aligned on entry by ABI
- * return address
- * frame pointer
- * loaded_image <-- local variable
- * saved %ebx <-- 16-byte aligned here
- * saved %edi
- * &loaded_image
- * &loaded_image_proto
- * handle <-- 16-byte aligned for call to handle_protocol
- */
-
- movl 12(%ebp), %eax // sys_table
- movl ST32_boottime(%eax), %eax // sys_table->boottime
- call *BS32_handle_protocol(%eax) // sys_table->boottime->handle_protocol
- addl $12, %esp // restore argument space
- testl %eax, %eax
- jnz 2f
-
- movl 8(%ebp), %ecx // image_handle
- movl 12(%ebp), %edx // sys_table
- movl -4(%ebp), %esi // loaded_image
- movl LI32_image_base(%esi), %esi // loaded_image->image_base
- movl %ebx, %ebp // startup_32 for efi32_pe_stub_entry
- /*
- * We need to set the image_offset variable here since startup_32() will
- * use it before we get to the 64-bit efi_pe_entry() in C code.
- */
- subl %esi, %ebx
- movl %ebx, rva(image_offset)(%ebp) // save image_offset
- jmp efi32_pe_stub_entry
-
-2: popl %edi // restore callee-save registers
- popl %ebx
- leave
- RET
-SYM_FUNC_END(efi32_pe_entry)
-
- .section ".rodata"
- /* EFI loaded image protocol GUID */
- .balign 4
-SYM_DATA_START_LOCAL(loaded_image_proto)
- .long 0x5b1b31a1
- .word 0x9562, 0x11d2
- .byte 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b
-SYM_DATA_END(loaded_image_proto)
-#endif
-
-#ifdef CONFIG_AMD_MEM_ENCRYPT
- __HEAD
- .code32
-/*
- * Write an IDT entry into boot32_idt
- *
- * Parameters:
- *
- * %eax: Handler address
- * %edx: Vector number
- *
- * Physical offset is expected in %ebp
- */
-SYM_FUNC_START(startup32_set_idt_entry)
- push %ebx
- push %ecx
-
- /* IDT entry address to %ebx */
- leal rva(boot32_idt)(%ebp), %ebx
- shl $3, %edx
- addl %edx, %ebx
-
- /* Build IDT entry, lower 4 bytes */
- movl %eax, %edx
- andl $0x0000ffff, %edx # Target code segment offset [15:0]
- movl $__KERNEL32_CS, %ecx # Target code segment selector
- shl $16, %ecx
- orl %ecx, %edx
-
- /* Store lower 4 bytes to IDT */
- movl %edx, (%ebx)
-
- /* Build IDT entry, upper 4 bytes */
- movl %eax, %edx
- andl $0xffff0000, %edx # Target code segment offset [31:16]
- orl $0x00008e00, %edx # Present, Type 32-bit Interrupt Gate
-
- /* Store upper 4 bytes to IDT */
- movl %edx, 4(%ebx)
-
- pop %ecx
- pop %ebx
- RET
-SYM_FUNC_END(startup32_set_idt_entry)
-#endif
-
-SYM_FUNC_START(startup32_load_idt)
-#ifdef CONFIG_AMD_MEM_ENCRYPT
- /* #VC handler */
- leal rva(startup32_vc_handler)(%ebp), %eax
- movl $X86_TRAP_VC, %edx
- call startup32_set_idt_entry
-
- /* Load IDT */
- leal rva(boot32_idt)(%ebp), %eax
- movl %eax, rva(boot32_idt_desc+2)(%ebp)
- lidt rva(boot32_idt_desc)(%ebp)
-#endif
- RET
-SYM_FUNC_END(startup32_load_idt)
-
-/*
- * Check for the correct C-bit position when the startup_32 boot-path is used.
- *
- * The check makes use of the fact that all memory is encrypted when paging is
- * disabled. The function creates 64 bits of random data using the RDRAND
- * instruction. RDRAND is mandatory for SEV guests, so always available. If the
- * hypervisor violates that the kernel will crash right here.
- *
- * The 64 bits of random data are stored to a memory location and at the same
- * time kept in the %eax and %ebx registers. Since encryption is always active
- * when paging is off the random data will be stored encrypted in main memory.
- *
- * Then paging is enabled. When the C-bit position is correct all memory is
- * still mapped encrypted and comparing the register values with memory will
- * succeed. An incorrect C-bit position will map all memory unencrypted, so that
- * the compare will use the encrypted random data and fail.
- */
-SYM_FUNC_START(startup32_check_sev_cbit)
-#ifdef CONFIG_AMD_MEM_ENCRYPT
- pushl %eax
- pushl %ebx
- pushl %ecx
- pushl %edx
-
- /* Check for non-zero sev_status */
- movl rva(sev_status)(%ebp), %eax
- testl %eax, %eax
- jz 4f
-
- /*
- * Get two 32-bit random values - Don't bail out if RDRAND fails
- * because it is better to prevent forward progress if no random value
- * can be gathered.
- */
-1: rdrand %eax
- jnc 1b
-2: rdrand %ebx
- jnc 2b
-
- /* Store to memory and keep it in the registers */
- movl %eax, rva(sev_check_data)(%ebp)
- movl %ebx, rva(sev_check_data+4)(%ebp)
-
- /* Enable paging to see if encryption is active */
- movl %cr0, %edx /* Backup %cr0 in %edx */
- movl $(X86_CR0_PG | X86_CR0_PE), %ecx /* Enable Paging and Protected mode */
- movl %ecx, %cr0
-
- cmpl %eax, rva(sev_check_data)(%ebp)
- jne 3f
- cmpl %ebx, rva(sev_check_data+4)(%ebp)
- jne 3f
-
- movl %edx, %cr0 /* Restore previous %cr0 */
-
- jmp 4f
-
-3: /* Check failed - hlt the machine */
- hlt
- jmp 3b
-
-4:
- popl %edx
- popl %ecx
- popl %ebx
- popl %eax
-#endif
- RET
-SYM_FUNC_END(startup32_check_sev_cbit)
-
/*
* Stack and heap for uncompression
*/
diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
index e476bcbd9b42..454757fbdfe5 100644
--- a/arch/x86/boot/compressed/kaslr.c
+++ b/arch/x86/boot/compressed/kaslr.c
@@ -668,7 +668,7 @@ static bool process_mem_region(struct mem_vector *region,
}
}
#endif
- return 0;
+ return false;
}
#ifdef CONFIG_EFI
diff --git a/arch/x86/boot/compressed/mem_encrypt.S b/arch/x86/boot/compressed/mem_encrypt.S
index a73e4d783cae..32f7cc8a8625 100644
--- a/arch/x86/boot/compressed/mem_encrypt.S
+++ b/arch/x86/boot/compressed/mem_encrypt.S
@@ -12,16 +12,13 @@
#include <asm/processor-flags.h>
#include <asm/msr.h>
#include <asm/asm-offsets.h>
+#include <asm/segment.h>
+#include <asm/trapnr.h>
.text
.code32
SYM_FUNC_START(get_sev_encryption_bit)
- xor %eax, %eax
-
-#ifdef CONFIG_AMD_MEM_ENCRYPT
push %ebx
- push %ecx
- push %edx
movl $0x80000000, %eax /* CPUID to check the highest leaf */
cpuid
@@ -52,12 +49,7 @@ SYM_FUNC_START(get_sev_encryption_bit)
xor %eax, %eax
.Lsev_exit:
- pop %edx
- pop %ecx
pop %ebx
-
-#endif /* CONFIG_AMD_MEM_ENCRYPT */
-
RET
SYM_FUNC_END(get_sev_encryption_bit)
@@ -98,7 +90,7 @@ SYM_CODE_START_LOCAL(sev_es_req_cpuid)
jmp 1b
SYM_CODE_END(sev_es_req_cpuid)
-SYM_CODE_START(startup32_vc_handler)
+SYM_CODE_START_LOCAL(startup32_vc_handler)
pushl %eax
pushl %ebx
pushl %ecx
@@ -184,15 +176,149 @@ SYM_CODE_START(startup32_vc_handler)
jmp .Lfail
SYM_CODE_END(startup32_vc_handler)
+/*
+ * Write an IDT entry into boot32_idt
+ *
+ * Parameters:
+ *
+ * %eax: Handler address
+ * %edx: Vector number
+ * %ecx: IDT address
+ */
+SYM_FUNC_START_LOCAL(startup32_set_idt_entry)
+ /* IDT entry address to %ecx */
+ leal (%ecx, %edx, 8), %ecx
+
+ /* Build IDT entry, lower 4 bytes */
+ movl %eax, %edx
+ andl $0x0000ffff, %edx # Target code segment offset [15:0]
+ orl $(__KERNEL32_CS << 16), %edx # Target code segment selector
+
+ /* Store lower 4 bytes to IDT */
+ movl %edx, (%ecx)
+
+ /* Build IDT entry, upper 4 bytes */
+ movl %eax, %edx
+ andl $0xffff0000, %edx # Target code segment offset [31:16]
+ orl $0x00008e00, %edx # Present, Type 32-bit Interrupt Gate
+
+ /* Store upper 4 bytes to IDT */
+ movl %edx, 4(%ecx)
+
+ RET
+SYM_FUNC_END(startup32_set_idt_entry)
+
+SYM_FUNC_START(startup32_load_idt)
+ push %ebp
+ push %ebx
+
+ call 1f
+1: pop %ebp
+
+ leal (boot32_idt - 1b)(%ebp), %ebx
+
+ /* #VC handler */
+ leal (startup32_vc_handler - 1b)(%ebp), %eax
+ movl $X86_TRAP_VC, %edx
+ movl %ebx, %ecx
+ call startup32_set_idt_entry
+
+ /* Load IDT */
+ leal (boot32_idt_desc - 1b)(%ebp), %ecx
+ movl %ebx, 2(%ecx)
+ lidt (%ecx)
+
+ pop %ebx
+ pop %ebp
+ RET
+SYM_FUNC_END(startup32_load_idt)
+
+/*
+ * Check for the correct C-bit position when the startup_32 boot-path is used.
+ *
+ * The check makes use of the fact that all memory is encrypted when paging is
+ * disabled. The function creates 64 bits of random data using the RDRAND
+ * instruction. RDRAND is mandatory for SEV guests, so always available. If the
+ * hypervisor violates that the kernel will crash right here.
+ *
+ * The 64 bits of random data are stored to a memory location and at the same
+ * time kept in the %eax and %ebx registers. Since encryption is always active
+ * when paging is off the random data will be stored encrypted in main memory.
+ *
+ * Then paging is enabled. When the C-bit position is correct all memory is
+ * still mapped encrypted and comparing the register values with memory will
+ * succeed. An incorrect C-bit position will map all memory unencrypted, so that
+ * the compare will use the encrypted random data and fail.
+ */
+SYM_FUNC_START(startup32_check_sev_cbit)
+ pushl %ebx
+ pushl %ebp
+
+ call 0f
+0: popl %ebp
+
+ /* Check for non-zero sev_status */
+ movl (sev_status - 0b)(%ebp), %eax
+ testl %eax, %eax
+ jz 4f
+
+ /*
+ * Get two 32-bit random values - Don't bail out if RDRAND fails
+ * because it is better to prevent forward progress if no random value
+ * can be gathered.
+ */
+1: rdrand %eax
+ jnc 1b
+2: rdrand %ebx
+ jnc 2b
+
+ /* Store to memory and keep it in the registers */
+ leal (sev_check_data - 0b)(%ebp), %ebp
+ movl %eax, 0(%ebp)
+ movl %ebx, 4(%ebp)
+
+ /* Enable paging to see if encryption is active */
+ movl %cr0, %edx /* Backup %cr0 in %edx */
+ movl $(X86_CR0_PG | X86_CR0_PE), %ecx /* Enable Paging and Protected mode */
+ movl %ecx, %cr0
+
+ cmpl %eax, 0(%ebp)
+ jne 3f
+ cmpl %ebx, 4(%ebp)
+ jne 3f
+
+ movl %edx, %cr0 /* Restore previous %cr0 */
+
+ jmp 4f
+
+3: /* Check failed - hlt the machine */
+ hlt
+ jmp 3b
+
+4:
+ popl %ebp
+ popl %ebx
+ RET
+SYM_FUNC_END(startup32_check_sev_cbit)
+
.code64
#include "../../kernel/sev_verify_cbit.S"
.data
-#ifdef CONFIG_AMD_MEM_ENCRYPT
.balign 8
SYM_DATA(sme_me_mask, .quad 0)
SYM_DATA(sev_status, .quad 0)
SYM_DATA(sev_check_data, .quad 0)
-#endif
+
+SYM_DATA_START_LOCAL(boot32_idt)
+ .rept 32
+ .quad 0
+ .endr
+SYM_DATA_END(boot32_idt)
+
+SYM_DATA_START_LOCAL(boot32_idt_desc)
+ .word . - boot32_idt - 1
+ .long 0
+SYM_DATA_END(boot32_idt_desc)
diff --git a/arch/x86/boot/cpuflags.c b/arch/x86/boot/cpuflags.c
index a83d67ec627d..d75237ba7ce9 100644
--- a/arch/x86/boot/cpuflags.c
+++ b/arch/x86/boot/cpuflags.c
@@ -64,20 +64,11 @@ int has_eflag(unsigned long mask)
return !!((f0^f1) & mask);
}
-/* Handle x86_32 PIC using ebx. */
-#if defined(__i386__) && defined(__PIC__)
-# define EBX_REG "=r"
-#else
-# define EBX_REG "=b"
-#endif
-
void cpuid_count(u32 id, u32 count, u32 *a, u32 *b, u32 *c, u32 *d)
{
- asm volatile(".ifnc %%ebx,%3 ; movl %%ebx,%3 ; .endif \n\t"
- "cpuid \n\t"
- ".ifnc %%ebx,%3 ; xchgl %%ebx,%3 ; .endif \n\t"
- : "=a" (*a), "=c" (*c), "=d" (*d), EBX_REG (*b)
- : "a" (id), "c" (count)
+ asm volatile("cpuid"
+ : "=a" (*a), "=b" (*b), "=c" (*c), "=d" (*d)
+ : "0" (id), "2" (count)
);
}
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index f912d7770130..9338c68e7413 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -80,10 +80,11 @@ bs_die:
ljmp $0xf000,$0xfff0
#ifdef CONFIG_EFI_STUB
- .org 0x3c
+ .org 0x38
#
# Offset to the PE header.
#
+ .long LINUX_PE_MAGIC
.long pe_header
#endif /* CONFIG_EFI_STUB */
@@ -406,7 +407,7 @@ xloadflags:
# define XLF1 0
#endif
-#ifdef CONFIG_EFI_STUB
+#ifdef CONFIG_EFI_HANDOVER_PROTOCOL
# ifdef CONFIG_EFI_MIXED
# define XLF23 (XLF_EFI_HANDOVER_32|XLF_EFI_HANDOVER_64)
# else
diff --git a/arch/x86/boot/string.c b/arch/x86/boot/string.c
index 8a3fff9128bb..1c8541ae3b3a 100644
--- a/arch/x86/boot/string.c
+++ b/arch/x86/boot/string.c
@@ -350,7 +350,7 @@ static int _kstrtoul(const char *s, unsigned int base, unsigned long *res)
}
/**
- * kstrtoul - convert a string to an unsigned long
+ * boot_kstrtoul - convert a string to an unsigned long
* @s: The start of the string. The string must be null-terminated, and may also
* include a single newline before its terminating null. The first character
* may also be a plus sign, but not a minus sign.
diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c
index a3725ad46c5a..bd247692b701 100644
--- a/arch/x86/boot/tools/build.c
+++ b/arch/x86/boot/tools/build.c
@@ -290,6 +290,7 @@ static void efi_stub_entry_update(void)
{
unsigned long addr = efi32_stub_entry;
+#ifdef CONFIG_EFI_HANDOVER_PROTOCOL
#ifdef CONFIG_X86_64
/* Yes, this is really how we defined it :( */
addr = efi64_stub_entry - 0x200;
@@ -299,6 +300,7 @@ static void efi_stub_entry_update(void)
if (efi32_stub_entry != addr)
die("32-bit and 64-bit EFI entry points do not match\n");
#endif
+#endif
put_unaligned_le32(addr, &buf[0x264]);
}
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-18 08:21:44 +0300