diff options
Diffstat (limited to 'arch/x86/events/utils.c')
-rw-r--r-- | arch/x86/events/utils.c | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/arch/x86/events/utils.c b/arch/x86/events/utils.c new file mode 100644 index 000000000000..a32368945462 --- /dev/null +++ b/arch/x86/events/utils.c @@ -0,0 +1,216 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <asm/insn.h> + +#include "perf_event.h" + +/* + * return the type of control flow change at address "from" + * instruction is not necessarily a branch (in case of interrupt). + * + * The branch type returned also includes the priv level of the + * target of the control flow change (X86_BR_USER, X86_BR_KERNEL). + * + * If a branch type is unknown OR the instruction cannot be + * decoded (e.g., text page not present), then X86_BR_NONE is + * returned. + */ +int branch_type(unsigned long from, unsigned long to, int abort) +{ + struct insn insn; + void *addr; + int bytes_read, bytes_left; + int ret = X86_BR_NONE; + int ext, to_plm, from_plm; + u8 buf[MAX_INSN_SIZE]; + int is64 = 0; + + to_plm = kernel_ip(to) ? X86_BR_KERNEL : X86_BR_USER; + from_plm = kernel_ip(from) ? X86_BR_KERNEL : X86_BR_USER; + + /* + * maybe zero if lbr did not fill up after a reset by the time + * we get a PMU interrupt + */ + if (from == 0 || to == 0) + return X86_BR_NONE; + + if (abort) + return X86_BR_ABORT | to_plm; + + if (from_plm == X86_BR_USER) { + /* + * can happen if measuring at the user level only + * and we interrupt in a kernel thread, e.g., idle. + */ + if (!current->mm) + return X86_BR_NONE; + + /* may fail if text not present */ + bytes_left = copy_from_user_nmi(buf, (void __user *)from, + MAX_INSN_SIZE); + bytes_read = MAX_INSN_SIZE - bytes_left; + if (!bytes_read) + return X86_BR_NONE; + + addr = buf; + } else { + /* + * The LBR logs any address in the IP, even if the IP just + * faulted. This means userspace can control the from address. + * Ensure we don't blindly read any address by validating it is + * a known text address. + */ + if (kernel_text_address(from)) { + addr = (void *)from; + /* + * Assume we can get the maximum possible size + * when grabbing kernel data. This is not + * _strictly_ true since we could possibly be + * executing up next to a memory hole, but + * it is very unlikely to be a problem. + */ + bytes_read = MAX_INSN_SIZE; + } else { + return X86_BR_NONE; + } + } + + /* + * decoder needs to know the ABI especially + * on 64-bit systems running 32-bit apps + */ +#ifdef CONFIG_X86_64 + is64 = kernel_ip((unsigned long)addr) || any_64bit_mode(current_pt_regs()); +#endif + insn_init(&insn, addr, bytes_read, is64); + if (insn_get_opcode(&insn)) + return X86_BR_ABORT; + + switch (insn.opcode.bytes[0]) { + case 0xf: + switch (insn.opcode.bytes[1]) { + case 0x05: /* syscall */ + case 0x34: /* sysenter */ + ret = X86_BR_SYSCALL; + break; + case 0x07: /* sysret */ + case 0x35: /* sysexit */ + ret = X86_BR_SYSRET; + break; + case 0x80 ... 0x8f: /* conditional */ + ret = X86_BR_JCC; + break; + default: + ret = X86_BR_NONE; + } + break; + case 0x70 ... 0x7f: /* conditional */ + ret = X86_BR_JCC; + break; + case 0xc2: /* near ret */ + case 0xc3: /* near ret */ + case 0xca: /* far ret */ + case 0xcb: /* far ret */ + ret = X86_BR_RET; + break; + case 0xcf: /* iret */ + ret = X86_BR_IRET; + break; + case 0xcc ... 0xce: /* int */ + ret = X86_BR_INT; + break; + case 0xe8: /* call near rel */ + if (insn_get_immediate(&insn) || insn.immediate1.value == 0) { + /* zero length call */ + ret = X86_BR_ZERO_CALL; + break; + } + fallthrough; + case 0x9a: /* call far absolute */ + ret = X86_BR_CALL; + break; + case 0xe0 ... 0xe3: /* loop jmp */ + ret = X86_BR_JCC; + break; + case 0xe9 ... 0xeb: /* jmp */ + ret = X86_BR_JMP; + break; + case 0xff: /* call near absolute, call far absolute ind */ + if (insn_get_modrm(&insn)) + return X86_BR_ABORT; + + ext = (insn.modrm.bytes[0] >> 3) & 0x7; + switch (ext) { + case 2: /* near ind call */ + case 3: /* far ind call */ + ret = X86_BR_IND_CALL; + break; + case 4: + case 5: + ret = X86_BR_IND_JMP; + break; + } + break; + default: + ret = X86_BR_NONE; + } + /* + * interrupts, traps, faults (and thus ring transition) may + * occur on any instructions. Thus, to classify them correctly, + * we need to first look at the from and to priv levels. If they + * are different and to is in the kernel, then it indicates + * a ring transition. If the from instruction is not a ring + * transition instr (syscall, systenter, int), then it means + * it was a irq, trap or fault. + * + * we have no way of detecting kernel to kernel faults. + */ + if (from_plm == X86_BR_USER && to_plm == X86_BR_KERNEL + && ret != X86_BR_SYSCALL && ret != X86_BR_INT) + ret = X86_BR_IRQ; + + /* + * branch priv level determined by target as + * is done by HW when LBR_SELECT is implemented + */ + if (ret != X86_BR_NONE) + ret |= to_plm; + + return ret; +} + +#define X86_BR_TYPE_MAP_MAX 16 + +static int branch_map[X86_BR_TYPE_MAP_MAX] = { + PERF_BR_CALL, /* X86_BR_CALL */ + PERF_BR_RET, /* X86_BR_RET */ + PERF_BR_SYSCALL, /* X86_BR_SYSCALL */ + PERF_BR_SYSRET, /* X86_BR_SYSRET */ + PERF_BR_UNKNOWN, /* X86_BR_INT */ + PERF_BR_ERET, /* X86_BR_IRET */ + PERF_BR_COND, /* X86_BR_JCC */ + PERF_BR_UNCOND, /* X86_BR_JMP */ + PERF_BR_IRQ, /* X86_BR_IRQ */ + PERF_BR_IND_CALL, /* X86_BR_IND_CALL */ + PERF_BR_UNKNOWN, /* X86_BR_ABORT */ + PERF_BR_UNKNOWN, /* X86_BR_IN_TX */ + PERF_BR_UNKNOWN, /* X86_BR_NO_TX */ + PERF_BR_CALL, /* X86_BR_ZERO_CALL */ + PERF_BR_UNKNOWN, /* X86_BR_CALL_STACK */ + PERF_BR_IND, /* X86_BR_IND_JMP */ +}; + +int common_branch_type(int type) +{ + int i; + + type >>= 2; /* skip X86_BR_USER and X86_BR_KERNEL */ + + if (type) { + i = __ffs(type); + if (i < X86_BR_TYPE_MAP_MAX) + return branch_map[i]; + } + + return PERF_BR_UNKNOWN; +} |