diff options
Diffstat (limited to 'arch/x86/kernel/alternative.c')
-rw-r--r-- | arch/x86/kernel/alternative.c | 148 |
1 files changed, 79 insertions, 69 deletions
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 73be3931e4f0..95e21596e2f9 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -160,7 +160,6 @@ extern s32 __retpoline_sites[], __retpoline_sites_end[]; extern s32 __return_sites[], __return_sites_end[]; extern s32 __cfi_sites[], __cfi_sites_end[]; extern s32 __ibt_endbr_seal[], __ibt_endbr_seal_end[]; -extern struct alt_instr __alt_instructions[], __alt_instructions_end[]; extern s32 __smp_locks[], __smp_locks_end[]; void text_poke_early(void *addr, const void *opcode, size_t len); @@ -255,6 +254,16 @@ static void __init_or_module noinline optimize_nops(u8 *instr, size_t len) } } +static void __init_or_module noinline optimize_nops_inplace(u8 *instr, size_t len) +{ + unsigned long flags; + + local_irq_save(flags); + optimize_nops(instr, len); + sync_core(); + local_irq_restore(flags); +} + /* * In this context, "source" is where the instructions are placed in the * section .altinstr_replacement, for example during kernel build by the @@ -385,6 +394,63 @@ apply_relocation(u8 *buf, size_t len, u8 *dest, u8 *src, size_t src_len) } } +/* Low-level backend functions usable from alternative code replacements. */ +DEFINE_ASM_FUNC(nop_func, "", .entry.text); +EXPORT_SYMBOL_GPL(nop_func); + +noinstr void BUG_func(void) +{ + BUG(); +} +EXPORT_SYMBOL_GPL(BUG_func); + +#define CALL_RIP_REL_OPCODE 0xff +#define CALL_RIP_REL_MODRM 0x15 + +/* + * Rewrite the "call BUG_func" replacement to point to the target of the + * indirect pv_ops call "call *disp(%ip)". + */ +static int alt_replace_call(u8 *instr, u8 *insn_buff, struct alt_instr *a) +{ + void *target, *bug = &BUG_func; + s32 disp; + + if (a->replacementlen != 5 || insn_buff[0] != CALL_INSN_OPCODE) { + pr_err("ALT_FLAG_DIRECT_CALL set for a non-call replacement instruction\n"); + BUG(); + } + + if (a->instrlen != 6 || + instr[0] != CALL_RIP_REL_OPCODE || + instr[1] != CALL_RIP_REL_MODRM) { + pr_err("ALT_FLAG_DIRECT_CALL set for unrecognized indirect call\n"); + BUG(); + } + + /* Skip CALL_RIP_REL_OPCODE and CALL_RIP_REL_MODRM */ + disp = *(s32 *)(instr + 2); +#ifdef CONFIG_X86_64 + /* ff 15 00 00 00 00 call *0x0(%rip) */ + /* target address is stored at "next instruction + disp". */ + target = *(void **)(instr + a->instrlen + disp); +#else + /* ff 15 00 00 00 00 call *0x0 */ + /* target address is stored at disp. */ + target = *(void **)disp; +#endif + if (!target) + target = bug; + + /* (BUG_func - .) + (target - BUG_func) := target - . */ + *(s32 *)(insn_buff + 1) += target - bug; + + if (target == &nop_func) + return 0; + + return 5; +} + /* * Replace instructions with better alternatives for this CPU type. This runs * before SMP is initialized to avoid SMP problems with self modifying code. @@ -438,20 +504,25 @@ void __init_or_module noinline apply_alternatives(struct alt_instr *start, * patch if feature is *NOT* present. */ if (!boot_cpu_has(a->cpuid) == !(a->flags & ALT_FLAG_NOT)) { - optimize_nops(instr, a->instrlen); + optimize_nops_inplace(instr, a->instrlen); continue; } - DPRINTK(ALT, "feat: %s%d*32+%d, old: (%pS (%px) len: %d), repl: (%px, len: %d)", - (a->flags & ALT_FLAG_NOT) ? "!" : "", + DPRINTK(ALT, "feat: %d*32+%d, old: (%pS (%px) len: %d), repl: (%px, len: %d) flags: 0x%x", a->cpuid >> 5, a->cpuid & 0x1f, instr, instr, a->instrlen, - replacement, a->replacementlen); + replacement, a->replacementlen, a->flags); memcpy(insn_buff, replacement, a->replacementlen); insn_buff_sz = a->replacementlen; + if (a->flags & ALT_FLAG_DIRECT_CALL) { + insn_buff_sz = alt_replace_call(instr, insn_buff, a); + if (insn_buff_sz < 0) + continue; + } + for (; insn_buff_sz < a->instrlen; insn_buff_sz++) insn_buff[insn_buff_sz] = 0x90; @@ -1411,46 +1482,6 @@ int alternatives_text_reserved(void *start, void *end) } #endif /* CONFIG_SMP */ -#ifdef CONFIG_PARAVIRT - -/* Use this to add nops to a buffer, then text_poke the whole buffer. */ -static void __init_or_module add_nops(void *insns, unsigned int len) -{ - while (len > 0) { - unsigned int noplen = len; - if (noplen > ASM_NOP_MAX) - noplen = ASM_NOP_MAX; - memcpy(insns, x86_nops[noplen], noplen); - insns += noplen; - len -= noplen; - } -} - -void __init_or_module apply_paravirt(struct paravirt_patch_site *start, - struct paravirt_patch_site *end) -{ - struct paravirt_patch_site *p; - char insn_buff[MAX_PATCH_LEN]; - - for (p = start; p < end; p++) { - unsigned int used; - - BUG_ON(p->len > MAX_PATCH_LEN); - /* prep the buffer with the original instructions */ - memcpy(insn_buff, p->instr, p->len); - used = paravirt_patch(p->type, insn_buff, (unsigned long)p->instr, p->len); - - BUG_ON(used > p->len); - - /* Pad the rest with nops */ - add_nops(insn_buff + used, p->len - used); - text_poke_early(p->instr, insn_buff, p->len); - } -} -extern struct paravirt_patch_site __start_parainstructions[], - __stop_parainstructions[]; -#endif /* CONFIG_PARAVIRT */ - /* * Self-test for the INT3 based CALL emulation code. * @@ -1586,28 +1617,11 @@ void __init alternative_instructions(void) */ /* - * Paravirt patching and alternative patching can be combined to - * replace a function call with a short direct code sequence (e.g. - * by setting a constant return value instead of doing that in an - * external function). - * In order to make this work the following sequence is required: - * 1. set (artificial) features depending on used paravirt - * functions which can later influence alternative patching - * 2. apply paravirt patching (generally replacing an indirect - * function call with a direct one) - * 3. apply alternative patching (e.g. replacing a direct function - * call with a custom code sequence) - * Doing paravirt patching after alternative patching would clobber - * the optimization of the custom code with a function call again. + * Make sure to set (artificial) features depending on used paravirt + * functions which can later influence alternative patching. */ paravirt_set_cap(); - /* - * First patch paravirt functions, such that we overwrite the indirect - * call with the direct call. - */ - apply_paravirt(__parainstructions, __parainstructions_end); - __apply_fineibt(__retpoline_sites, __retpoline_sites_end, __cfi_sites, __cfi_sites_end, true); @@ -1618,10 +1632,6 @@ void __init alternative_instructions(void) apply_retpolines(__retpoline_sites, __retpoline_sites_end); apply_returns(__return_sites, __return_sites_end); - /* - * Then patch alternatives, such that those paravirt calls that are in - * alternatives can be overwritten by their immediate fragments. - */ apply_alternatives(__alt_instructions, __alt_instructions_end); /* @@ -1685,8 +1695,8 @@ void __init_or_module text_poke_early(void *addr, const void *opcode, } else { local_irq_save(flags); memcpy(addr, opcode, len); - local_irq_restore(flags); sync_core(); + local_irq_restore(flags); /* * Could also do a CLFLUSH here to speed up CPU recovery; but |